Sanyo Digital Camera VPC SX 560 User Guide

FILE NO.

SERVICE MANUAL

Color Digital Camera

VPC-SX560EX

(Product Code : 126 279 01)

(Europe)

(PAL Genenral)

VPC-SX560E

(Product Code : 126 279 03)

(U.K.)

VPC-SX560

(Product Code : 126 279 02)

(U.S.A.)

(Canada)

Contents

1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2

2. DISASSEMBLY........................................................ 13

3. ELECTRICAL ADJUSTMENT .................................. 16

4. USB STORAGE INFORMATION

REGISTRATION ...................................................... 21

5. TROUBLESHOOTING GUIDE................................. 22

6. PARTS LIST............................................................. 23

CABINET AND CHASSIS PARTS 1 ........................ 23

CABINET AND CHASSIS PARTS 2 ........................ 24

ELECTRICAL PARTS .............................................. 25

ACCESSORIES ....................................................... 32

PACKING MATERIALS............................................ 32

CIRCUIT DIAGRAM (Refer to the separate volume)

PRODUCT SAFETY NOTICE

The components designated by a symbol (

) in this schematic diagram designates components whose value are of

special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part

designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.

3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

REFERENCE No. SM5310249

SX114/EX, E, U

Download from Www.Somanuals.com. All Manuals Search And Download.

3. IC902, IC904, IC908 (H Driver) and IC907 (V Driver)

An H driver and V driver are necessary in order to generate

the clocks (vertical transfer clock, horizontal transfer clock

and electronic shutter clock) which driver the CCD.

IC902, IC904 and IC908 are inverter IC which drives the hori-

zontal CCDs (H1 and H2). In addition the XV1-XV3 signals

which are output from IC102 are the vertical transfer clocks,

and the XSG1 and XSG signal which is output from IC102 is

superimposed onto XV2A and XV2B at IC907 in order to gen-

erate a ternary pulse. In addition, the XSUB signal which is

output from IC102 is used as the sweep pulse for the elec-

tronic shutter, and the RG signal which is output from IC102

is the reset gate clock.

4. IC905 (CDS, AGC Circuit and A/D Converter)

The video signal which is output from the CCD is input to Pin

(30) of IC905. There are S/H blocks inside IC905 generated

from the XSHP and XSHD pulses, and it is here that CDS

(correlated double sampling) is carried out.

After passing through the CDS circuit, the signal passes

through the AGC amplifier. It is A/C converted internally into

a 10-bit signal, and is then input to IC102 of the CA2 circuit

board. The gain of the AGC amplifier is controlled by serial

data which is output from IC102 of the CA2 circuit board.

PBLK AVDD

AVSS

CLPOB

AD9840

DRVDD

DRVSS

CLP

4 dB

CDS

2~36 dB

VGA

CCDIN

2:1

MUX

10-BIT

ADC

DOUT

V^CC

CLP

Offset

DAC

VRT

VRB

BANDGAP

REFERENCE

CLPDM

AUX1IN

AUX2IN

BUF

CML

INTERNAL

BIAS

CONTROL

REGISTERS

2:1

MUX

DVDD

INTERNAL

TIMING

DIGITAL

INTERFACE

CLP

DVSS

SL SCK SDATA

SEN

SHPSHDDATA

CLK

GND

Fig. 1-5. IC905 Block Diagram

Fig. 1-3. IC902, IC904 and IC908 Block Diagram

VDD

SHT

Input

Buffer

XSHT

XV3

V3B

XSG3B

XSG3A

XV1

V3A

V1B

^H15

XSG1B

XSG1A

V1A

XV4

XV2

GND

Fig. 1-4. IC907 Block Diagram

– 3 –

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Transfer of Electric Charge by the Horizontal CCD

The transfer system for the horizontal CCD emplays a 2-phase drive method.

The electric charges sent to the final stage of the horizontal CCD are transferred to the floating diffusion, as shown in Fig. 1-6.

RG is turned on by the timing in (1), and the floating diffusion is charged to the potential of PD. The RG is turned off by the timing

in (2). In this condition, the floating diffusion is floated at high impedance. The H1 potential becomes shallow by the timing in (3),

and the electric charge now moves to the floating diffusion.

Here, the electric charges are converted into voltages at the rate of V = Q/C by the equivalent capacitance C of the floating

diffusion. RG is then turned on again by the timing in (1) when the H1 potential becomes deep.

Thus, the potential of the floating diffusion changes in proportion to the quantity of transferred electric charge, and becomes

CCD output after being received by the source follower. The equivalent circuit for the output circuit is shown in Fig. 1-7.

(1)

H1 HOG

CCD OUT

(1) (2) (3)

3.5V

Floating diffusion

H2 H1 HOG

(2)

(3)

3.5V

CCD OUT

15.5V

12V

H1 HOG

RG pulse peak signal

CCD OUT

Black level

Signal voltage

CCD OUT

Fig. 1-6. Horizontal Transfer of CCD Imager and Extraction of Signal Voltage

6. Lens drive block

6-1. Shutter drive

The two control signals (SIN1, SIN2) which are output from

the ASIC expansion port (IC106) are converted into drive

pulses(SOUT1, SOUT2) by the motor drive (IC951), and the

shutter is opened and closed by regular current drive.

Reset gate pulse

12V Pre-charge drain bias（PD）

Direction of transfer

H Register

6-2. Iris drive

The two control signals (IIN1, IIN2) which are output from the

ASIC expansion port (IC106) are converted into drive pulses

(IOUT1, IOUT2) by the motor drive (IC952), and the iris is

opened and closed.

Voltage output

Electric

charge

6-3. Focus drive

Floating diffusion gate is

floated at a high impedance.

The focusing motor drive clock (FCLK) which are output from

the ASIC makes drive signal (FA1, FA2, FB1 and FB2) from

drive drection signal (FCW) by driver (IC951) and is then used

to drive the micro stepping motor for focusing motor. Detec-

tion of the standard focusing positions is carried out by means

of the photointerruptor (FOCUS PI) inside the lens block.

C is charged

equivalently

Fig. 1-7. Theory of Signal Extraction Operation

– 4 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1-2. CA2 CIRCUIT DESCRIPTION

1. Circuit Description

1-8. 8-bit D/A circuit (Audio)

1-1. Scannning converter (Interlace converter)

This circuit uses the function of a 64-Mbit SDRAMs to con-

vert the non-interlaced signal which is output from the CCD

into an interlaced signal for the video monitor.

This circuit converts the audio signals (analog signals) from

the microphone to 8-bit digital signals.

1-9. 8-bit A/D circuit (Audio)

The audio signals which were converted to digial form by the

8-bit A/D circuit are temporarily to a sound buffer and then

recorded in the SSFDC card. During playback, the 8-bit D/A

circuit converts these signals into analog audio signals.

1-2. Camera signal processor

This comprises circuits such as the digial clamp circuit, white

balance circuit, γcircuit, color signal generation circuit, ma-

trix circuit and horizontal aperture circuit.

1-10. Sound buffer

1. Digital clamp circuit

Audio memory

The optical black section of the CCD extracts 16-pixel aver-

aged values from the subsequent data to make the black level

of the CCD output data uniform for each line. The 16-pixel

averaged value for each line is taken as the sum of the value

for the previous line multiplied by the coefficient k and the

value for the current line multiplied by the coefficient 1-k.

1-11. LCD driver

The Y/C signals which are input to the LCD driver are con-

verted to RGB signals, and the timing signal which is neces-

sary for LCD monitor display and the RGB signals are then

supplied to the LCD monitor.

2. White balance circuit

1-12. LCD monitor

This circuit controls the white balance by using theAWB judge-

ment value computed by the CPU to control the gain for each

R, G and B pixel based on the CCD data which has been

read.

This is the image display device which displays the image

signals supplied from the LCD driver.

1-13. UART

This circuit is used for transmitting serial data to a PC. The

3. γ circuit

interface is RS-232C-compatible.

This circuit performs (gamma) correction in order to maintain

a linear relationship between the light input to the camera

and the light output from the picture screen.

1-14. Memory card control

This reads data from the memory card and stores it in SDRAM,

and writes out the image data stored in SDRAM. In addition,

error correction is carried out when the data is read.

4. Color generation circuit

This circuit converts the CCD data into RGB signals.

1-15. MJPEG compression

5. Matrix circuit

This circuit generates the Y signals, R-Y signals and B-Y sig-

nals from the RGB signals.

Still and continuous frame data is converted to JPEG format,

and movie images are compressed and expanded in MJPEG

format.

6. Horizontal aperture circuit

2. Outline of Operation

This circuit is used generate the aperture signal.

When the shutter opens, the reset signals, TEST0, TEST1

and the serial signals (“take a picture” commands) from the

8-bit microprocessor are input and record operation starts.

When the TG drives the CCD, picture data passes through

the A/D and is then input to the ASIC as 10-bit data. This data

then passes through the DCLP, AWB, shutter and γcircuit,

after which it is input to the SDRAM. The AWB, shutter, γ,

and AGC value are computed from this data, and two expo-

sures are made to obtain the optimum picture. The data which

has already been stored in the SDRAM is read by the CPU

and color generation is carried out. Each pixel is interpolated

from the surrounding data as being either R, G or B primary

color data to produce R, G and B data. At this time, correction

of the lens distortion which is a characteristic of wide-angle

lenses is carried out. Aperture correction is carried out, and

in case of still picture the data is then compressed by the

JPEG method and in case of picture it is compressed by

MJPEG method and is written to compact flash card. When

the data is to be output to an external device, it is read JPEG

picture data from the compact flash card and output to PC via

the UART.

1-3. SDRAM controller

This circuit outputs address, RAS, CAS and AS data for con-

trolling the SDRAM. It also refreshes the SDRAM.

1-4. PIO

The expansion parallel port can be used for functions such

as stroboscope control and LCD driver control.

1-5. SIO (Serial control)

This is the interface for the 4-bit microprocessor.

1-6. USB control

This is comunicated PC with 12 Mbps.

1-7. TG, SG block

This is the timing generation circuit which generates the clocks

(vertical transfer clock and electronic shutter clock) which drive

the CCD.

– 5 –

Download from Www.Somanuals.com. All Manuals Search And Download.

3. LCD Block

During EE, gamma conversion is carried out for the 10-bit

RGB data which is input from the A/D conversion block of the

CCD to the ASIC in order that the γrevised can be displayed

on the video. The YUV of 640 x 480 is then transferred to the

SVRAM.

The data which has accumulated in the SDRAM is after D/A

conversion is carried out by SDRAM control circuit inside the

ASIC, makes Y/C signal, the data is sent to the LCD panel

and displayed.

If the shutter button is pressed in this condition, the 10-bit

data which is output from the A/D conversion block of the

CCD is sent to the SDRAM (DMA transfer), and is displayed

on the LCD as a freeze-frame image.

During playback, the JPEG image data which has accumu-

lated in the compact flash card is converted to RGB signals.

In the same way as for EE, the data is then sent to the SDRAM,

after which D/A conversion is carried out inside the ASIC,

and then the data is sent to the LCD panel and displayed.

The LCD driver is converted Y/C signals to RGB signals from

ASIC, and these RGB signals and the control signal which is

output by the LCD driver are used to drive the LCD panel.

The RGB signals are 1H transposed so that no DC compo-

nent is present in the LCD element, and the two horizontal

shift register clocks drive the horizontal shift registers inside

the LCD panel so that the 1H transposed RGB signals are

applied to the LCD panel.

Because the LCD closes more as the difference in potential

between the VCOM (common polar voltage: fixed at DC) and

the R, G and B signals becomes greater, the display becomes

darker; if the difference in potential is smaller, the element

opens and the LCD become brighter. In addition, the bright-

ness and contrast settings for the LCD can be varied by means

of the serial data from the ASIC.

– 6 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1-3. CA3 CIRCUIT DESCRIPTION

1. Outline

4. Analog system 5.0 V Power Output

5 V (A) is output. Feedback is provided to the swiching con-

troller (Pin (1) of IC521) so that PWM control can be carried

out.

This is the main CA3 power block, and is comprised of the

following blocks.

Switching controller (IC521)

Analog system 5.0 V power output (L5201, Q5203, D5201,

C5206)

5. Backlight Power Output

Backlight power output (L5101, Q5102, D5101, C5106)

10 mA (L) is output. The backlighting turns on when current

flows in the direction from pin (1) to pin (2) of CN512. At this

time, a feedback signal is sent from pin (2) of CN512 to pin

(1) of IC511 so that PWM control is carried out to keep the

current at a constant level (10 mA).

2. Switching Controller (IC521)

This is the basic circuit which is necessary for controlling the

power supply for a PWM-type switching regulator, and is pro-

vided with one built-in channel. Feedback from 5 V (A) power

supply output is received, and the PWM duty is varied so that

each one is maintained at the correct voltage setting level.

2-1. Short-circuit protection circuit

If output is short-circuited for the length of time determined

by the condenser which is connected to Pin (2) of IC521, all

output is turned off. The control signal (P ON, P(A) ON and

LCD ON) are recontrolled to restore output.

3. Switching Controller (IC511)

This is the basic circuit which is necessary for controlling the

power supply for a PWM-type switching regulator, and is pro-

vided with one built-in channel. Feedback from 10 mA (L)

power supply output is received, and the PWM duty is varied

so that each one is maintained at the correct current setting

level.

3-1. Protection circuit

If output is short-circuited for the length of time determined

by the condenser which is connected to Pin (2) of IC511 the

output is shorted out or the backlighting is open (there is no

connection between CN512 and the backlight unit), output

will turn off. all output is turned off. The control signal (P ON,

P(A) ON and LCD ON) are recontrolled to restore output.

– 7 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1-4. PW1 POWER CIRCUIT DESCRIPTION

1. Outline

3. Digital 3.3 V Power Output

This is the main PW1 power circuit, and is comprised of the

following blocks.

Switching controller (IC501)

3.3 V (D) is output. Feedback for the 3.3 V (D) is provided to

the switching controller (Pins (1) of IC501) so that PWM con-

trol can be carried out.

Digital and LCD system and 5.0 V system power output

(L5010, Q5002, D5013, C5061, C5015)

Digital 3.3 V system power supply (L5017, Q5009, D5007,

C5062)

Digital 3.4 V system power supply (L5001, Q5006, D5004,

C5060)

4. Digital 3.4 V System Power Output

3.4 V (D) is output. Feedback is provided to the swiching con-

troller (Pin (12) of IC501) so that PWM control can be carried

out.

Analog and LCD system power supply (Q5007, T5001)

Series regulator (IC502)

Digital 2.5 V system power supply (Q5008, C5076, C5077)

5. 5 V System Power Output

5 V (D) and 5 V (L) are output. Feedback for the 5 V (D) is

provided to the switching controller (Pin (25) of IC501) so

that PWM control can be carried out.

2. Switching Controller (IC501)

This is the basic circuit which is necessary for controlling the

power supply for a PWM-type switching regulator, and is pro-

vided with four built-in channels, only CH1 (digital 3.3 V), CH3

(5 V system), CH2 (digital 3.4 V) and CH4 (analog and LCD

system) are used. Feedback from 3.3 V (D) (CH1), 3.4 V (D)

(CH2) , 5.0 V (D) (CH3) and +15.0 V (A) or +12.4 V (L) (CH4)

power supply outputs are received, and the PWM duty is var-

ied so that each one is maintained at the correct voltage set-

ting level.

6. Analog and LCD System Power Output

15.0 V (A), -8.0 V (A), 12.4 V (L) and 15 V (L) are output.

Feedback for the 15.0 V (A) with view mode and 12.4 V (L)

with play mode is provided to the switching controller (Pin

(36) of IC501) so that PWM control can be carried out.

7. Series Regulator (IC502)

This is provided with one built-in channel. Digital 3.4 V is in-

put, and digital 2.5 V is output.

2-1. Short-circuit protection circuit

8. Digital 2.5 V System Power Output

If output is short-circuited for the length of time determined

by the condenser which is connected to Pin (17) of IC501, all

output is turned off. The control signal (P ON, P(A) ON and

LCD ON) are recontrolled to restore output.

2.5 V (D) is output. Feedback for the 2.5 V (D) is provided to

the Pin (7) of IC502. The current of Q5008 base is controled

so that the voltage of Q5008 collector is 2.5 V.

– 8 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1-5. PW1 STROBE CIRCUIT DESCRIPTION

1. Charging Circuit

2. Light Emission Circuit

When UNREG power is supplied to the charge circuit and the

CHG signal becomes High (3.3 V), the charging circuit starts

operating and the main electorolytic capacitor is charged with

high-voltage direct current.

When RDY and TRIG signals are input from the ASIC expan-

sion port, the stroboscope emits light.

2-1. Emission control circuit

However, when the CHG signal is Low (0 V), the charging

circuit does not operate.

When the RDY signal is input to the emission control circuit,

Q5409 switches on and preparation is made to let current

flow to the light emitting element. Moreover, when a STOP

signal is input, the stroboscope stops emitting light.

1-1. Power switch

When the CHG signal switches to Hi, Q5406 turns ON and

the charging circuit starts operating.

2-2. Trigger circuit

When a TRIG signal is input to the trigger circuit, D5405

switches on, a high-voltage pulse of several kilovolts is gen-

erated inside the trigger circuit, and this pulse is then applied

to the light emitting part.

1-2. Power supply filter

L5401 and C5401 constitute the power supply filter. They

smooth out ripples in the current which accompany the switch-

ing of the oscillation transformer.

2-3. Light emitting element

1-3. Oscillation circuit

When the high-voltage pulse form the trigger circuit is ap-

plied to the light emitting part, currnet flows to the light emit-

ting element and light is emitted.

This circuit generates an AC voltage (pulse) in order to in-

crease the UNREG power supply voltage when drops in cur-

rent occur. This circuit generates a drive pulse with a frequency

of approximately 50-100 kHz. Because self-excited light omis-

sion is used, the oscillation frequency changes according to

the drive conditions.

※Beware of electric shocks.

1-4. Oscillation transformer

The low-voltage alternating current which is generated by the

oscillation control circuit is converted to a high-voltage alter-

nating current by the oscillation transformer.

1-5. Rectifier circuit

The high-voltage alternating current which is generated at

the secondary side of T5401 is rectified to produce a high-

voltage direct current and is accumulated at electrolytic ca-

pacitor C5412 on the main circuit board.

1-6. Voltage monitoring circuit

This circuit is used to maintain the voltage accumulated at

C5412 at a constance level.

After the charging voltage is divided and converted to a lower

voltage by R5417 and R5419, it is output to the SY1 circuit

board as the monitoring voltage VMONIT. When this VMONIT

voltage reaches a specified level at the SY1 circuit board, the

CHG signal is switched to Low and charging is interrupted.

– 9 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1-6. SY1 CIRCUIT DESCRIPTION

1. Configuration and Functions

For the overall configuration of the SY1 circuit board, refer to the block diagram. The configuration of the SY1 circuit board

centers around a 8-bit microprocessor (IC301).

The 8-bit microprocessor handles the following functions.

1. Operation key input, 2. Mode LCD display, 3. Clock control, 4. Power ON/OFF, 5. Storobe charge control

Signal

CHG VOL

SCAN IN

AVDD

Outline

Strobe charge voltage input (analog input)

Key matrix input

I/O

2~7

A/D converter analog power terminal

A/D converter standard voltage input terminal

Standby LED (red) ON/OFF signal

Standby LED (green) ON/OFF signal

GND

VREF

L : LED light

STBY (R) LED

STBY (G) LED

VSS

Self-timer LED ON/OFF signal

L : LED light

L : ON

SELF LED

NOT USED

AVREF ON

BUZZER

CHG ON

NOT USED

VSS

14~19

A/D standard power ON/OFF signal

Buzzer output

Flash charge ON/OFF signal

H : ON

23~30

32~69

GND

NOT USED

P (A) ON

P ON

DC/DC converter (analog) ON/OFF signal

DC/DC converter (digital) ON/OFF signal

DIN jack connect detection signal

Memory card attachment detection signal

AV output cable connection detection signal

Serial communication data input (←ASIC)

Serial communication data output (→ASIC)

Serial communication clock output (→ASIC)

Connect to GND

H : ON

DIN CONNECT

CARD

H : Connection

L : Attachment

H : Connection

AV JACK

SCK

Main clock oscillation terminal

Main clock oscillation terminal (4 MHz)

VDD

XOUT

XIN

VDD

XCIN

Sub clock oscillation terminal

Sub clock oscillation terminal (32.768 kHz)

Reset input

XCOUT

RESET

Battery OFF detection signal

RS-232C RXD input terminal

Serial communication request signal

L : OFF

BAT OFF

RXD

L : Request

S. REQ

88~90

91~93

NOT USED

SCAN OUT0~2

WAKE UP

LCD ON

ASIC TEST 0

ASIC RESET

ASIC TEST 2

AVSS

Key matrix output

Wake up signal

H : WAKE UP

H : ON

LCD monitor power ON/OFF signal

ASIC reset control signal

ASIC reset signal

L : Reset output

L : Reset control

ASIC reset control signal

Analog GND

BATTERY

Battery voltage input (analog input)

100

Table 4-1. 8-bit Microprocessor Port Specification

– 10 –

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Internal Communication Bus

The SY1 circuit board carries out overall control of camera operation by detecting the input from the keyboard and the condition

of the camera circuits. The 8-bit microprocessor reads the signals from each sensor element as input data and outputs this data

to the camera circuits (ASIC) or to the LCD display device as operation mode setting data. Fig. 4-1 shows the internal commu-

nication between the 8-bit microprocessor and ASIC.

ASIC RESET

S. REQ

ASIC SO

8-bit

ASIC

microprocessor

ASIC SI

ASIC SCK

ASIC TEST 0

ASIC TEST 2

Fig. 4-1 Internal Bus Communication System

3. Key Operaiton

For details of the key operation, refer to the instruction manual.

SCAN

OUT

MODE

SET

DOWN

RIGHT

OPTION

IMAGE

LEFT

SEQUENTIAL

SHOT

SHOOTING

VIDEO CLIPS

SHUTTER 2nd

STILL IMAGE

PLAY

SHUTTER 1st

TEST

POWER

INFO

Table 4-2. Key Operation

– 11 –

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Power Supply Control

The 8-bit microprocessor controls the power supply for the overall system.

The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V

voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scanning is carried out

even when the power switch is turned off, so that the camera can start up again. When the battery is removed, the 8-bit micro-

processor operates in sleep mode using the backup capacitor. At this time, the 8-bit microprocessor only carries out clock

counting, and waits in standby for the battery to be attached again. When a switch is operated, the 8-bit microprocessor supplies

power to the system as required.

The 8-bit microprocessor first sets both the P (A) ON signal at pin (70) and the P ON signal at pin (71) to high, and then turns on

the DC/DC converter. After this, low signals are output from pins (96), (97) and (98) so that the ASIC is set to the active condition.

If the LCD monitor is on, the LCD ON signal at pin (95) set to high, and the DC/DC converter for the LCD monitor is turned on.

Once it is completed, the ASIC returns to the reset condition, all DC/DC converters are turned off and the power supply to the

whole system is halted.

MODE

LCD

ASIC,

8 bit

LCD

CCD

memory

CPU

MONITOR

3.2 V

5V (L)

5 V (A)

3.3 V

OFF

Supply voltage

Power OFF

(ALWAYS)

+12V etc.

+12 V etc.

OFF

32KHz

4 MHz

OFF

Power switch ON-

Auto power down

Shutter switch ON

ON → OFF

OFF

Resolution, Flash,

CAM

OFF

Self timer switch ON

LCD finder

Play back

OFF

Table 4-3. Camera Mode (Battery Operation)

Note) P. SAVE = 4 MHz = Main clock operation, 32 kHz = Sub clock operation

– 12 –

Download from Www.Somanuals.com. All Manuals Search And Download.

2. DISASSEMBLY

2-1. REMOVAL OF CABINET ASSEMBLY (FRONT) AND CABINET ASSEMBLY (BACK)

8. Button info

1. Five screws

1.7 x 3.0

9. Screw 1.7 x 2.5

7. Screw

1.7 x 4.0

2. Cabinet

back

10. Cabinet top

12. Screw 1.7 x 2.5

13. FPC

23. Dec cabinet L

11. Spacer holder F2

15. Holder

bracket R

3. Three screws

1.7 x 3.0

14. Dec cabinet R

20. Cover

battery

18. Holder

terminal

4. Connector

17. Two screws

1.7 x 3.0

19. Two

16. Slide the cover jack.

screws

1.7 x 4.0

22. Holder card

21. Two screws 1.7 x 2.5

5. Cabinet

front

6. Cover card

1. Three screws

1.7 x 3.0

2-2. REMOVAL OF SY1 BOARD

1. Two screws 1.7 x 2.5

5. SY1 board

2. Connector

8. Heat sink A

3. Remove the solders.

4. Connector

6. Speaker

7. Heat sink rubber A

– 13 –

Download from Www.Somanuals.com. All Manuals Search And Download.

2-3. REMOVAL OF HOLDER BATTERY AND PW1 BOARD

4. Holder battery

2. Two screws

1.7 x 3.0

3. Remove the solders.

2. Two screws

1.7 x 3.0

5. Three screws

1.7 x 2.5

1. Screw

1.7 x 2.5

1. Screw

1.7 x 2.5

6. PW1 board

8. Spacer PW1 side A

7. Holder

chassis F

2-4. REMOVAL OF LCD, LENS ASSEMBLY AND CA1 BOARD

4. LCD

11. CA1 board

2. Connector

3. FPC

12. Three screws

1.7 x 2.5

5. Holder chassis B

1. Two screws

1.7 x 2.5

6. FPC

10. Connector

7. Two screws

2.0 x 6.0

8. Screw

2.0 x 2.5

9. FPC

– 14 –

Download from Www.Somanuals.com. All Manuals Search And Download.

2-5. REMOVAL OF CA3 BOARD AND CA2 BOARD

4. Two screws

1.7 x 2.5

2. Two screws

1.7 x 4.0

5. Two connectors

3. Lens VF

4. Screw 1.7 x 2.5

6. CA3 board

8. Holder chassis M

7. CA2 board

1. Three screws

1.7 x 2.5

2-6. BOARD LOCATION

SY1 board

CA1 board

PW1 board

CA3 board

CA2 board

– 15 –

Download from Www.Somanuals.com. All Manuals Search And Download.

3. ELECTRICAL ADJUSTMENT

5. 12.4 V (L) Voltage Adjustment 1

6. 12.4 V (L) Voltage Adjustment 2

7. AWB Adjustment

8. Lens Adjustment

9. CCD Defect Detect Adjustment

10. LCD Panel Adjustment

　10-1. LCD H AFC Adjustment

　10-2. LCD RGB Offset Adjustment

　10-3. LCD Gain Adjustment

3-1. Table for Servicing Tools

Ref. No.

Name

Color viewer 5,100 K

Siemens star chart

Calibration software

Chart for color adjustment

Extension cord

Part code

J-1

VJ8-0007

J-2

J-3

J-4

J-5

VJ8-0175

VJ8-0155

VJ8-0164

10-4. LCD Blue Brightness Adjustment

10-5. LCD Red Brightness Adjustment

Note: If the lens, CCD and board in item 7-9, it is necessary

to adjust again. Adjustments other than these should

be carried out in sequence. For 9, carry out adjustment

after sufficient charging has taken place.

Note: J-1 color viewer is 100 - 110 VAC only.

J-1

J-3

J-5

J-2

3-4. Setup

1. System requirements

Windows 98 or Me

IBM R -compatible PC with Pentium processor

CD-ROM drive

3.5-inch high-density diskette drive

Serial port with standard RS-232C interface or USB port

8 MB RAM

Hard disk drive with at least 15 MB available

VGA or SVGA monitor with at least 256-color display

J-4

2. Installing calibration software

1. Insert the calibration software installation diskette into your

diskette drive.

2. Open the explorer.

3. Copy the DSC Cal folder on the floppy disk in the FD drive

to a folder on the hard disk.

3. Installing USB drive

Install the USB drive with camera or connection kit for PC.

4. Color Viewer

Turn on the switch and wait for 30 minutes for aging to take

place before using Color Pure.

5. Computer screen during adjustment

LCD

R Bright

Calibration

AWB

Upload

B Bright

Gain

VCOMDC

VCOMPP

Firmware

Focus

3-2. Equipment

1. Oscilloscope

2. Digital voltmeter

3. AC adaptor

4. IBM R -compatible PC

5. DC regulated power supply

RGB Offset

Tint

Image

UV Matrix

Cal Mode

Phase

Test

Initialize

EVF

LCD Type

H AFC

Cal Data

Setting

Language

USB strage

VID

PID

Get

Set

Set Serial

Set Rev.

Set

Video Mode

3-3. Adjustment Items and Order

1. IC501 Oscillation Frequency Adjustment

2. 5.0 V (D) Voltage Adjustment

3. 3.3 V (D) A Voltage Adjustment

4. 3.4 V (D) B Voltage Adjustment

– 16 –

Download from Www.Somanuals.com. All Manuals Search And Download.

3-5. Connecting the camera to the computer

1. Turn off both camera and computer.

2. Line up the arrow on the serial cable connector with the notch on the camera's serial port. Insert the connector.

In case of USB cable, line up the arrow on the USB cable connector with the notch on the camera's USB port. Insert the

connector.

3. Line up the serial connector on the serial cable with the serial port on your computer, and insert the connector.

In case of USB cable, line up the USB connector on the USB cable with the USB port on your computer, and insert the

connector.

4. Turn on the camera and your computer system.

To serial port or USB port

USB cable

Serial cable

AC adaptor

– 17 –

Download from Www.Somanuals.com. All Manuals Search And Download.

4. 3.4 V (D) B Voltage Adjustment

3-6. Adjust Specifications

[PW1 board (Side B)]

Measuring Point

Measuring Equipment

ADJ. Location

L5009 ST side

Digital voltmeter

VR504

ADJ. Value

3.40 ±0.03 V

Q5006-1,2,5,6

VR504

Adjustment method:

1. Adjust with VR504 to 3.40 ±0.03 V.

D5012-2

VR507

5. 12.4 V (L) Voltage Adjustment 1

VR506

R5056

L5009 (ST)

Measuring Point

Measuring Equipment

ADJ. Location

D5012-2

VR503

CL539

Digital voltmeter

VR507

VR505

VR501

ADJ. Value

12.40 ±0.05 V

Adjustment method:

Note:

1. Set the play mode.

1. Voltage adjustment is necessary to repair in the PW1 board

and replace the parts.

2. Adjust with VR507 to 12.40 ±0.05 V.

2. Power voltage set about +3.0 V.

Preparation:

1. Connect CN104 on the CA2 board and CN502 on the PW1

board with extension cord.

6. 12.4 V (L) Voltage Adjustment 2

Measuring Point

Measuring Equipment

ADJ. Location

D5012-2

Digital voltmeter

VR506

2. Open the barrier switch.

3. Slide the slide switch to camera, and turn on the LCD.

ADJ. Value

12.40 ±0.05 V

1. IC501 Oscillation Frequency Adjustment

Adjustment method:

1. Set the view mode, and turn on the LCD.

2. Adjust with VR506 to 12.40 ±0.05 V.

Measuring Point

Measuring Equipment

ADJ. Location

Q5006-1, 2, 5, 6

Frequency counter

VR501

7. AWB Adjustment

ADJ. Value

200 ±1 kHz

Adjustment method:

1. Adjust with VR501 to 200 ±1 kHz.

2. 5.0 V (D) Voltage Adjustment

Measuring Point

Measuring Equipment

ADJ. Location

CL539

Serial cable

Digital voltmeter

VR505

ADJ. Value

5.10 ±0.05 V

Adjustment method:

1. Adjust with VR505 to 5.10 ±0.05 V.

Camera

0 - 18 cm

3. 3.3 V (D) A Voltage Adjustment

All white pattern

Color viewer (5,100K)

Measuring Point

Measuring Equipment

ADJ. Location

R5056 below

Digital voltmeter

VR503

Preparation:

POWER switch: ON

Adjusting method:

ADJ. Value

3.30 ±0.02 V

Adjustment method:

1. When setting the camera in place, set it to an angle so that

nothing appears in any part of the color viewer except the

white section. (Do not enter any light.)

1.Adjust with VR503 to 3.30 ±0.02 V

2. Double-click on the DscCalDi126.

3. Click the AWB, and click the Yes.

– 18 –

Download from Www.Somanuals.com. All Manuals Search And Download.

4. AWB adjustment value will appear on the screen.

5. Click the OK.

10. LCD Panel Adjustment

[CA3 board (Side A)]

8. Lens Adjustment

VR171

CL170

CL171

CL173

CL172

Serial cable

10-1. LCD H AFC Adjustment

Preparation:

POWER switch: ON

Adjusting method:

1. Double-click on the DscCalDi126.

2. Select 0 on the LCD “H AFC”.

Camera

Approx.

95 cm ± 3 cm

Siemens

star chart

3. Apply the trigger at CL173, and adjust VR171 so that the

time A from the point where the pulse at CL170 rises until

the position where the video signal at CL173 starts in 0.82

±0.1 µsec (for VPC-SX560EX and VPC-SX560E) or 1.5

±0.1 µsec (for VPC-SX560).

Preparation:

POWER switch: ON

Adjustment condition:

More than A3 size siemens star chart

Fluorescent light illumination with no flicker

Illumination above the subject should be 400 lux ±10 %.

Adjustment method:

1. Set the siemens star chart 95 cm ±3 cm so that it be-

comes center of the screen.

CL170

2. Double-click on the DscCalDi126.

3. Click the Focus, and click the Yes.

4. Lens adjustment value will appear on the screen.

5. Click the OK.

CL173

enlargement

9. CCD Defect Detect Adjustment

Preparation:

POWER switch: ON (Set the camera mode.)

Adjustment method:

1. Double-click on the DscCalDi126.

2. Select CCD Defect Detection on the LCD “Test”, and click

the “Yes”.

CL170

CL173

3. After the adjustment is completed, OK will display.

4. Click the OK.

– 19 –

Download from Www.Somanuals.com. All Manuals Search And Download.

10-2. LCD RGB Offset Adjustment

Adjusting method:

1. Adjust LCD “RGB offset” so that the amplitude of the CL173

waveform is 7.3 V ± 0.3 Vp-p.

7.3 V

± 0.3 Vp-p

CL173 waveform

VG + 0.2

± 0.05 Vp-p

10-3. LCD Gain Adjustment

Adjusting method:

1. Adjust LCD “Gain” so that the amplitude of the CL173 wave-

form is 4.0 V ± 0.1 Vp-p.

Note:

CL171 waveform

10-2. LCD RGB Offset adjustment should always be carried

out first.

10-5. LCD Red Brightness Adjustment

Adjusting method:

1. Adjust LCD “R Bright” so that the amplitude of the CL172

waveform is VG – 0.1 ± 0.05 Vp-p with respect to the CL173

(VG) waveform.

Note:

4.0 V

10-2. LCD RGB Offset adjustment and 10-3. LCD Gain ad-

justment should always be carried out first.

± 0.1Vp-p

CL173 waveform

10-4. LCD Blue Brightness Adjustment

Adjusting method:

1. Adjust LCD “B Bright” so that the amplitude of the CL171

waveform is VG + 0.2 ± 0.05 Vp-p with respect to the CL173

(VG) waveform.

Note:

CL173 waveform

10-2. LCD RGB Offset adjustment and 10-3. LCD Gain ad-

justment should always be carried out first.

VG – 0.1

± 0.05 Vp-p

CL172 waveform

– 20 –

Download from Www.Somanuals.com. All Manuals Search And Download.

4. USB STORAGE INFORMATION

REGISTRATION

USB storage data is important for when the camera is con-

nected to a computer via a USB connection.

If there are any errors in the USB storage data, or if it has not

been saved, the USB specification conditions will not be sat-

isfied, so always check and save the USB storage data.

Preparation:

POWER switch: ON

Adjustment method:

1. Connect the camera to a computer. (Refer to 3-5. Con-

necting the camera to the computer on the page 17.)

2. Double-click on the DscCalDi126.

3. Click on the Get button in the USB storage window and

check the USB storage data.

VID: SANYO

PID: VPC-SX560EX or VPC-SX560E or VPC-SX560

Serial:

Rev. : 1.00

4. Check the “Serial” in the above USB storage data. If the

displayed value is different from the serial number printed

on the base of the camera, enter the number on the base

of the camera. Then click the Set button.

5. Next, check VID, PID and Rev. entries in the USB storage

data. If any of them are different from the values in 3. above,

make the changes and then click the corresponding Set

button.

LCD

R Bright

Calibration

AWB

Upload

B Bright

Gain

VCOMDC

VCOMPP

Firmware

Focus

RGB Offset

Tint

Image

UV Matrix

Cal Mode

Phase

Test

Initialize

EVF

LCD Type

H AFC

Cal Data

Setting

Language

USB strage

VID

PID

Get

Set

Set Serial

Set Rev.

Set

Video Mode

– 21 –

Download from Www.Somanuals.com. All Manuals Search And Download.

5. TROUBLESHOOTING GUIDE

POWER LOSS INOPERTIVE

OFF

TAKING INOPERATIVE

PUSH SUTTER

BUTTON

MAIN SW

MAIN SW ON

NORMAL

IC301-2, 3

(SCAN IN 4, 5)

PULSE INPUT

IC301-4 (SCAN IN 0)

PULSE INPUT

CHECK

S3062, R3021

CHECK R3025,

R3026, D3067, D3068

YES

LOW

CN301-7, 8

(P ON, P(A) ON)

CHECK IC301,

R3005, R3006, PW1

IC302-7 (UNREG)

CHECK PW1, CA2

CHECK IC302

HIGH

CHECK

IC301, CA1, PW1

IC301-6, 21, 25

HIGH

IC301-81

(VDD)

YES

HIGH

SERIAL

CHECK

IC301, CA1

IC301-84

(RESET)

CHECK IC302, R3051

CHECK R3052

COMMUNICATION

HIGH

LOW

IC301-85

(BAT OFF)

CHECK CA1

HIGH

IC301-80

OSCILLATION

CHECK X3001

YES

IC301-82

OSCILLATION

CHECK X3002

YES

CHECK IC301

NO PICTURE

MAIN CLOCK FOR SYSTEM OPERATION

NO OPERATION IF ABSENT

CLK (114MHz)

OSCILLATION

CHECK X1101 OSCILLATOR, L1106 AND IC111

CHECK IC111-9, L1106

YES

SD CLK (57 MHz)

OSCILLATION

IC106, 107-38

SD RAM (IC106, IC107) MOVEMENT CLOCK

NO READ PROGRAM FROM IC121 IF ABSENT

CHECK IC102, IC106, IC107

INCORRECT HANDSHAKING BETWEEN 8-BIT

CPU AND RS-232C

CHECK EACH INTERFACE

IC102-140, 141

IC301-75, 76

CHECK SOLDERING OF

MEMORY PIN

– 22 –

Download from Www.Somanuals.com. All Manuals Search And Download.

6. PARTS LIST

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

411 018 1802

DESCRIPTION

SCR PAN PCS 1.7X2.5

CABINET & CHASSIS PARTS 1

636 057 5233

636 057 8371

636 054 7216

411 177 8407

636 058 2378

636 058 7762

636 058 1180

636 056 2523

636 054 7186

636 057 8531

636 057 8487

636 057 5226

636 054 6998

636 057 8548

645 043 5836

636 056 2530

411 179 0300

636 054 7209

636 059 8386

411 018 3707

636 054 6790

636 059 8454

636 056 0239

HOLDER CARD-SX113/J

COMPL,COVER BATT-SX113/J

SPRING P COVER-SX112/J

SCR S-TPG PAN PCS 1.7X3

SHIELD TAPE

636 059 9901

636 057 8296

411 018 2304

636 057 8456

636 059 4760

636 057 8524

636 056 2639

636 057 8500

411 177 6502

645 024 7613

636 057 2843

636 054 6820

636 054 6912

636 058 7595

636 054 7056

412 060 7101

636 056 5357

636 059 9932

636 057 8982

636 059 8447

636 057 8494

636 056 0505

ASSY,COVER LENS A-SX114EX

ASSY,CABI FRONT-SX113/J

SCR PAN PCS

1.7X3

CABINET FRONT-SX113/J

SPACER POWER SW-SX113/J

DEC FLASH-SX113/J

DEC VF-SX112/J

DEC LENS-SX113/J

SCR S-TPG PAN PCS 1.7X4

SWITCH,LEAF 1P-1T

SPACER POWER SW-SX112/J

CABINET INNER-SX112/J

DEC SELF-SX112/J

SPRING COVER LENS-SX112/J

HOLDER COVER LENS-SX112/J

SPECIAL SCREW-1.4X2.0

SPACER MONITOR-SX112/J

CABINET BACK-SX114/EX

DEC MONITOR-SX113/U

HOLDER VF-SX114/J

SHIELD TAPE

SPACER HOLDER F2-SX112/J

HEAT SINK RUBBER A-SX112J

SHAFT STRAP-SX112/J

DEC CABINET L-SX114/J

COVER JACK-SX113/J

HOLDER TERMINAL-SX113/J

HOLDER BRKT R-SX112/J

DEC CABINET R-SX114/J

UNIT,CONTROL PANEL-SX114

HEAT SINK RUBBER B-SX112J

SCR S-TPG PAN PCS 1.7X2.5

SLIDE KNOB POWER-SX112/J

CABINET TOP-SX114/J

SCR PAN PCS 1.7X4

BUTTON INFO-SX112/J

KNOB POWER-SX114/J

ASSY,WIRE POWER SW (N.S.P.)

COVER CARD-SX113/J

LABEL COVER CARD-SX112/J

N.S.P.: Not available as service parts.

46(N.S.P.)

SX114/U Parts List-1

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

636 054 7025

DESCRIPTION

HOLDER CHASSIS M-SX112/J

SPACER CHASSIS M-SX112/J

COMPL PWB,CA-3,VPC-SX560 ONLY

COMPL PWB,CA-3,EXCEPT VPC-SX560

SPACER LENS-SX112/J

ADHESIVE TAPE VF-SR661/J

SCR PAN PCS 1.7X4

ASSY,LENS,VF

CABINET & CHASSIS PARTS 2

636 056 2646

636 059 2322

636 059 7631

636 056 2653

636 056 2615

411 018 3707

645 028 1457

636 054 7155

636 055 4658

636 054 6974

636 049 6026

636 057 5219

636 054 6981

636 054 7100

636 058 6611

636 058 6598

636 055 5211

636 056 5494

636 054 8367

636 059 2315

636 057 1020

636 058 2576

636 058 9650

636 054 7032

645 040 3392

636 060 4599

645 035 4458

411 018 1802

645 038 1751

636 053 9181

409 471 7202

636 053 9174

636 053 9198

636 059 7662

411 038 9000

411 022 7807

636 057 7817

636 057 1686

636 056 4930

636 056 1953

645 040 5976

645 036 6680

636 057 5202

411 177 8407

636 057 1679

636 059 7709

636 055 3286

636 059 7655

636 059 7686

636 056 0277

645 036 6277

LENS(ASSY)

SCR PAN PCS 1.7X2.5

OPTICAL FILTER

SPACER

IC ICX267AK-B

MOUNTING,LENS

SPACER INSULATOR

COMPL PWB,CA-1

SCR PAN 2X2.5

SCR S-TPG PAN 2X6

SPACER FLASH-SX112/J

SPACER HOLDER F1-SX112/J

HOLDER CHASSIS F-SX112/J

SPACER HOLDER F4-SX112/J

MICROPHONE

ASSY,LAMP,SX112/J

HOLDER FLASH-SX113/J

SCR S-TPG PAN PCS 1.7X3

SPACER PW1 SIDE A-SX112/J

COMPL PWB,PW-1

FLEXIBLE PWB,SX112

COMPL PWB,CA-2,VPC-SX560 ONLY

COMPL PWB,CA-2,EXCEPT VPC-SX560

SPACER SPEAKER B-SX112/J

SPEAKER,8

REFLECTOR POWER-SX112/J

LABEL CAUTION BATT-SX112J

HOLDER SP HOOK-SX112/J

SPRING BATTERY-SR6/J

HOLDER BATTERY R-SX113/J

HOLDER BRKT L-SX112/J

HOLDER BATTERY L-SX112/J

TERMINAL BATT B-SX113/J

TERMINAL BATT A-SX113/J

HOLDER TERMINAL-SX112/E

HOLDER P BATT A-SX112/J

ASSY,HOLDER P BATT B-112J

COMPL PWB,SY-1

SPACER SY1-SX112/J

SHIELD TAPE

SHIELD TAPE-SX113/J

HOLDER CHASSIS B-SX112/J

LCD(ALP228CGXB0)

SPACER LCD HOLDER-SX114/J

N.S.P.: Not available as service parts.

SX114/J Parts List-2

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRICAL PARTS

Note:

1. Materials of Capacitors and Resistors are abbreviated as follows ;

Resistors

MT-FILM

MT-GLAZE

OXIDE-MT

Capacitors

MT-POLYEST

MT-COMPO

TA-SOLD

Metallized Film Resistor

Metallized Glaze Resistor

Oxide Metallized Film Resistor

Metallized Polyester Capacitor

Metallized Composite Capacitor

Tantalum Solid Capacitor

AL-SOLID

NP-ELECT

OS-SOLID

Aluminum Solid Capacitor

Non-Polarized Electrolytic Capacitor

Aluminum Solid Capacitors with Organic

Semiconductive Electrolytic Capacitor

Double Layered Electrolytic Capacitor

DL-ELECT

2. Tolerance of Capacitor (10pF over) and Resistor are noted with follow symboles.

F ............1%

M ..........20%

G ............2%

N ..........30%

J ............5%

Z ..........+80% ~ -20%

K ............10%

3. Capacitors

4. Inductors

U :

P : pF

UH :

MH : mH

5. N.S.P. : Not available as service parts.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

C9127

C9130

C9131

C9132

C9133

C9134

C9135

C9136

C9137

C9139

C9140

C9141

C9142

C9143

C9144

C9146

C9147

C9148

C9149

C9150

C9151

C9152

C9153

C9154

C9155

C9156

C9157

C9158

C9159

C9160

C9161

C9687

C9688

C9689

C9690

C9691

C9692

C9693

C9694

C9695

C9696

C9697

C9698

C9699

403 276 1007

CERAMIC 0.01U K 16V

COMPL PWB,CA-1

403 322 1005

403 283 6309

403 276 1007

403 283 6309

403 276 1007

403 322 1005

403 276 1007

403 322 1005

403 276 1007

403 283 6309

403 322 1005

403 276 1007

403 345 4304

403 283 6309

403 276 1007

403 320 5302

403 296 1308

403 322 1005

403 276 1007

403 283 6309

403 276 1007

403 329 6508

403 343 3101

403 322 1005

403 284 7800

403 322 1005

403 345 4304

403 322 1005

403 279 5101

403 276 1007

403 322 1005

(RESISTORS)

401 226 1503

401 225 1801

401 226 1503

401 240 9004

401 226 1503

401 224 9709

401 224 8900

CERAMIC

0.1U Z 16V

1U Z 10V

636 059 7662

CERAMIC 0.01U K 16V

CERAMIC 1U Z 10V

(SEMICONDUCTORS)

Q9001

Q9002

Q9003

Q9004

Q9041

Q9501

Q9503

405 153 6709

405 102 5609

405 092 4101

405 102 5609

405 092 4101

405 115 5108

405 133 8907

405 131 3607

405 129 3107

TR 2SC3931-D

CERAMIC 0.01U K 16V

TR 2SD1819A-R

TR 2SC4081-R

TR 2SD1819A-R

TR 2SC4081-R

TR 2SA1774 R

TR DTC114EUA

TR DTA144EUA

TR UMD3N

CERAMIC

CERAMIC 0.01U K 16V

CERAMIC 0.1U Z 16V

0.1U Z 16V

CERAMIC 0.01U K 16V

CERAMIC

1U Z 10V

0.1U Z 16V

CERAMIC 0.01U K 16V

(INTEGRATED CIRCUITS)

TA-SOLID

CERAMIC

22U M 10V

1U Z 10V

IC902

IC904

IC905

IC907

IC908

IC909

IC951

IC952

IC953

409 428 1901

409 471 1507

409 446 8708

409 428 1901

409 407 0505

409 286 9309

409 215 6805

409 451 8700

(DIODES)

IC TC74ACT04FT

IC AD9840JST

IC CXD3400N

CERAMIC 0.01U K 16V

CERAMIC 0.15U K 25V

IC TC74ACT04FT

IC TK11331BM

IC LB1843V

IC LB1638M

IC MPC17AT85MTA

TA-SOLID

CERAMIC

10U M 20V

0.1U Z 16V

D9001

D9002

407 198 9905

407 113 5609

407 134 7200

(CAPACITORS)

403 276 1007

403 283 6309

403 322 1005

403 310 0201

403 322 1005

403 276 1007

403 283 6309

403 322 1005

403 283 6309

403 322 1005

403 283 5708

403 283 6309

403 296 1308

403 322 1005

403 345 4304

403 283 6309

DIODE MA727

DIODE DSH015

DIODE MA141K

CERAMIC 0.01U K 16V

CERAMIC 1U Z 10V

CERAMIC 0.01U K 16V

C9020

C9021

C9022

C9105

C9106

C9107

C9108

C9109

C9110

C9111

C9112

C9113

C9114

C9115

C9116

C9117

C9118

C9119

C9120

C9121

C9122

C9123

C9124

C9125

C9126

CERAMIC 0.01U K 16V

TA-SOLID

CERAMIC

10U M 6.3V

1U K 6.3V

0.1U Z 16V

CERAMIC

1U Z 10V

0.1U Z 16V

180P J 25V

0.1U Z 16V

CERAMIC 0.047U Z 16V

CERAMIC

TA-SOLID

CERAMIC

0.1U Z 16V

22U M 10V

0.1U Z 16V

CERAMIC 3300P K 50V

CERAMIC 0.01U K 16V

CERAMIC

1U Z 10V

0.1U Z 16V

1U Z 10V

CERAMIC

0.1U Z 16V

R9002

R9003

R9005

R9006

R9010

R9011

R9012

R9013

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 3.9 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

CERAMIC 2200P K 50V

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

1U Z 10V

10U M 20V

0.1U Z 16V

22U M 10V

1U Z 10V

MT-GLAZE

22 JA 1/16W

MT-GLAZE 100K JA 1/16W

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

401 224 9402

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

R9014

R9015

R9016

R9017

R9018

R9019

R9020

R9021

R9022

R9023

R9024

R9025

R9026

R9028

R9029

R9039

R9040

R9041

R9042

R9043

R9500

R9501

R9502

R9503

R9504

R9505

R9506

R9507

R9508

R9510

R9511

R9512

R9513

R9514

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 82K JA 1/16W

MT-GLAZE 100 JA 1/16W

MT-GLAZE 3.3K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 10K JA 1/16W

IC147

IC148

IC149

IC152

IC154

IC161

IC162

409 435 6906

IC SN74LV245AP

IC SN74LV244AP

IC TK15405M

IC TC7SH32FU

IC TC7SH00FU

IC LMV321M7X

401 225 0903

401 224 8801

401 225 0200

401 224 9006

401 226 1503

401 224 9006

401 224 8900

401 224 9006

401 225 0309

401 224 9006

401 225 0903

401 263 6905

401 225 0606

401 226 1503

401 267 3207

401 262 1604

401 224 9006

401 105 7909

401 224 8900

401 158 4009

401 225 1207

401 225 0606

401 158 4009

401 224 9006

401 226 1503

401 225 1405

401 224 9006

401 275 7402

401 263 1900

401 262 1604

401 275 8607

(CONNECTORS)

645 034 8150

645 021 5131

645 032 9067

409 435 6807

409 427 4101

409 363 3206

409 395 5902

409 432 2505

(DIODES)

D1301

D1501

D1601

407 149 0807

407 109 4609

407 134 7408

407 130 4401

407 149 0807

DIODE 1SS355

DIODE MA728

DIODE MA141WK

DIODE DAN202U

DIODE 1SS355

MT-GLAZE

33 JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 82K JA 1/16W

D1602

MT-GLAZE

2K JA 1/16W

(CRYSTAL DEVICES)

645 024 0461

MT-GLAZE 5.6K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 330 DC 1/16W

MT-GLAZE 2.2K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 3.3 JA 1/16W

MT-GLAZE 4.7K JA 1/16W

MT-GLAZE 5.6K JA 1/16W

MT-GLAZE 3.3 JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 1.0 GA 1/10W

MT-GLAZE 3.3K DC 1/16W

MT-GLAZE 2.2K DC 1/16W

X1101

OSC,CRYSTAL 17.734476MHZ,

EXCEPT VPC-SX560

OSC,CRYSTAL 14.31818MHZ,VPC-SX560 ONLY

X1101

645 023 3951

645 040 0049

(INDUCTORS)

645 020 1912

645 020 1899

645 021 1737

645 035 7190

645 016 0349

(CAPACITORS)

403 348 1300

403 343 8700

403 323 6306

403 283 6309

403 312 6805

403 329 6508

403 312 6805

403 343 8700

403 329 6508

403 346 2309

403 329 6508

403 312 6805

403 329 6508

L1083

L1085

L1102

L1106

L1107

L1501

L1502

L1601

L1603

L1604

INDUCTOR,240 OHM

INDUCTOR,68 OHM

INDUCTOR,47U J

INDUCTOR,33U J

INDUCTOR,600 OHM

C1001

C1005

C1007

C1008

C1011

C1012

C1014

C1031

C1032

C1033

C1034

C1035

C1036

C1037

C1038

C1039

C1040

C1041

C1042

C1043

C1044

C1045

C1046

C1047

C1048

C1049

C1051

C1052

C1057

C1061

C1062

C1063

C1064

C1065

C1066

C1067

C1071

C1072

C1073

C1074

C1075

C1076

C1077

C1081

C1082

C1083

C1086

CERAMIC 0.047U K 10V

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

1U M 12V

0.1U K 16V

1U Z 10V

MT-GLAZE

13 GA 1/4W

CN901

CN902

CN951

SOCKET,FFC 39P (N.S.P)

PLUG,PWB-PWB 30P (N.S.P)

SOCKET,FPC 11P (N.S.P)

0.1U Z 16V

10U M 6.3V

0.1U Z 16V

1U M 12V

10U M 6.3V

0.1U K 10V

10U M 6.3V

0.1U Z 16V

10U M 6.3V

COMPL PWB,CA-2

636 059 7655

(VPC-SX560 ONLY)

(EXCEPT VPC-SX560)

636 059 7686

(SEMICONDUCTORS)

Q1011

Q1012

Q1041

Q1301

Q1421

Q1422

Q1501

Q1502

Q1503

Q1601

405 115 7201

405 129 3107

405 115 7201

405 115 5702

405 115 7201

405 129 2100

405 129 2308

405 106 4806

405 129 2308

405 106 4806

405 133 8907

405 102 5005

405 078 6709

405 102 6705

405 102 8303

405 102 5609

405 092 4101

405 115 5702

TR DTC144EE

TR UMD3N

TR DTC144EE

TR DTA144EE

TR DTC144EE

TR UMT1N

TR UMZ1N

TR XP4601

TR UMZ1N

TR XP4601

TR DTC114EUA

TR UN5213

TR 2SC4396

TR 2SA1745-7

TR 2SA1745-6

TR 2SD1819A-R

TR 2SC4081-R

TR DTA144EE

Q1602

Q1621

Q1622

(INTEGRATED CIRCUITS)

IC102

IC106

IC107

IC111

IC121

IC131

410 381 9200

409 472 5900

409 482 0506

409 472 5900

409 482 0506

409 426 7707

409 497 4001

409 498 4703

409 412 4109

409 495 2504

409 466 6104

409 149 5301

409 435 6906

IC LC27306AJ-TE5 (N.S.P.)

IC M2V64S40DTP-7

IC HY57V651620BTC-10S

IC M2V64S40DTP-7

IC HY57V651620BTC-10S

IC W48C53-08H

IC 27901114D,EXCEPT VPC-SX560

IC 279000114F,VPC-SX560 ONLY

IC ADM3202ARU

IC SP3232ECY

IC TC7W32FK

IC TC7S00F

IC138

IC139

IC146

IC SN74LV245AP

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

403 311 4505

DESCRIPTION

LOCATION PARTS NO.

401 105 7909

DESCRIPTION

C1090

C1091

C1093

C1101

C1102

C1112

C1201

C1320

C1321

C1322

C1323

C1324

C1421

C1422

C1423

C1424

C1501

C1508

C1510

C1511

C1512

C1513

C1517

C1519

C1521

C1602

C1603

C1604

C1621

C1622

C1623

C1625

C1626

CERAMIC 1000P K 50V

R1108

R1110

R1201

R1202

R1322

R1323

R1324

R1325

R1326

R1327

R1328

R1329

R1419

R1420

R1425

R1426

R1427

R1428

R1429

R1430

R1432

R1433

R1434

R1507

R1508

R1509

R1510

R1511

R1512

R1513

R1514

R1515

R1516

R1519

R1522

R1523

R1525

R1526

R1527

R1530

R1531

R1533

R1534

R1602

R1604

R1605

R1606

R1607

R1610

R1621

R1622

R1623

R1624

R1625

R1626

R1627

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 680 JA 1/16W

MT-GLAZE

403 311 4505

403 329 6508

403 343 8700

403 346 2309

403 207 0307

403 312 6805

403 164 0204

403 312 6805

403 329 6508

403 312 6805

403 334 3806

403 311 5007

403 312 6508

403 312 6805

403 343 8700

403 345 3802

403 345 4205

403 312 6805

403 329 6508

403 312 6805

403 345 4304

403 329 6508

403 345 4205

403 283 6309

403 346 2309

403 283 6309

403 319 3609

403 343 8700

(RESISTORS)

401 261 4903

401 261 6402

401 261 5108

401 261 4507

401 224 9006

401 262 3905

401 225 1405

401 262 3905

401 166 2905

401 225 7902

401 226 1503

401 225 7902

401 226 1503

401 225 1801

401 225 7902

401 226 1503

401 224 8900

401 224 9006

401 226 1503

401 224 9006

401 226 1503

401 224 9006

401 226 1503

401 225 2006

401 225 8107

401 037 5004

401 226 1503

401 224 9006

401 226 1503

401 225 1405

401 105 7909

401 226 1503

401 224 9006

401 224 8900

401 225 1405

401 224 9006

401 261 9908

401 261 6402

401 226 2401

401 226 1503

401 225 3805

401 261 6105

401 261 5108

401 261 3807

401 225 2006

401 225 3805

401 226 5402

401 226 1503

401 261 9601

401 226 1503

401 226 2401

401 226 1503

401 224 8900

401 226 1503

401 225 1207

401 226 1503

401 224 9303

401 037 5004

401 224 9006

401 224 9204

401 224 9501

401 224 9006

401 225 0408

(CONNECTORS)

645 034 8150

645 035 5455

645 035 5387

645 035 5400

645 035 8869

10 JA 1/16W

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

10U M 6.3V

1U M 12V

0.1U K 10V

1U Z 16V

0.1U Z 16V

0.1U Z 25V

0.1U Z 16V

10U M 6.3V

0.1U Z 16V

10U K 6.3V

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

33P J 50V,EXCEPT VPC-SX560

56P J 50V,VPC-SX560 ONLY

0.1U Z 16V

1U M 12V

22U M 4V

47U M 6.3V

0.1U Z 16V

10U M 6.3V

0.1U Z 16V

22U M 10V

10U M 6.3V

47U M 6.3V

1U Z 10V

MT-FILM

91 DD 1/16W

200 DU 1/16W

MT-GLAZE 560 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 1.5K JA 1/16W

MT-FILM

390 DU 1/16W

0.1U K 10V

1U Z 10V

330P K 50V

1U M 12V

MT-FILM 1.0K DU 1/16W

MT-FILM 2.0K DU 1/16W

MT-GLAZE 680 JA 1/16W

MT-GLAZE 1.5K JA 1/16W

R1007

R1008

R1011

R1012

R1021

R1022

R1023

R1024

R1025

R1031

R1032

R1033

R1034

R1035

R1036

R1037

R1038

R1039

R1040

R1041

R1042

R1043

R1044

R1045

R1046

R1049

R1050

R1051

R1053

R1055

R1056

R1057

R1058

R1061

R1069

R1070

R1071

R1090

R1091

R1092

R1093

R1103

R1104

MT-FILM

MT-FILM 1.0K DU 1/16W

MT-FILM 1.5K DU 1/16W

MT-GLAZE 10K JA 1/16W

MT-FILM

MT-GLAZE 47K JA 1/16W

MT-FILM 24 DD 1/16W

820 DU 1/16W

200 DU 1/16W

MT-GLAZE

MT-GLAZE 0.000 ZA 1/16W

MT-FILM 68 DD 1/16W

56 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 560 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 4.7K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

24 DD 1/16W

MT-FILM 1.5K DU 1/16W

MT-GLAZE 220 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 220 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE

1K JA 1/16W

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 15K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GLAZE

47 JA 1/16W

CN101

CN103

CN104

CN105

CN106

CN141

SOCKET,FFC 39P (N.S.P)

SOCKET,26P

PLUG,PWB-PWB 30P (N.S.P)

PLUG,TYPE2 50P (N.S.P)

MT-GLAZE 220 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W,VPC-SX560 ONLY

MT-GLAZE 0.000 ZA 1/16W,EXCEPT VPC-SX560

(N.S.P)

(MISCELLANEOUS)

636 056 5050

645 035 8852

636 056 2554

636 056 2547

636 056 2516

SPACER CF-SX112/J

HOLDER,CF TYPE2

SPACER CA2 SIDE-B SX112

HEAT SINK RUBBER C-SX112J

HEAT SINK A-SX112/J

Y1001

Y1201

Y1202

COMPL PWB,CA-3

636 059 2322

(VPC-SX560 ONLY)

(EXCEPT VPC-SX560)

636 059 7631

(SEMICONDUCTORS)

Q1701

Q1702

405 102 5609

405 092 4101

405 115 7201

TR 2SD1819A-R

TR 2SC4081-R

TR DTC144EE

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

Q1707

Q5101

Q5102

Q5103

Q5104

Q5201

Q5203

Q5208

405 102 5500

TR 2SB1218A-R

TR 2SA1576-R

TR DTC114EE

TR SSM3K01F(BRA)

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR DTC114EE

TR DTC144EE

TR CPH6401

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR DTC144EE

C1779

C5101

C5102

C5103

C5104

C5105

C5106

C5108

C5109

C5201

C5202

C5203

C5204

C5206

C5207

C5208

C5210

C5211

C5212

C5215

403 332 9503

CERAMIC

1U M 6.3V

10U M 10V

0.1U K 16V

560P J 25V

10U M 10V

1U M 25V

10U Z 25V

100P J 50V

0.1U K 16V

560P J 25V

10U M 10V

405 092 4200

405 115 6907

405 153 3302

405 092 1100

405 092 1209

405 092 1407

405 115 6907

405 115 7201

405 148 7100

405 092 1100

405 092 1209

405 092 1407

405 115 7201

403 332 9503

403 333 3708

403 338 4403

403 316 1400

403 333 3708

403 340 1803

403 327 0300

403 157 3601

403 338 4403

403 316 1400

403 333 3708

403 113 3805

403 333 3708

403 332 9503

403 333 3708

403 283 6309

(RESISTORS)

401 105 1600

401 167 0702

401 166 9409

401 105 1600

401 105 0603

401 167 1204

401 167 1709

401 166 8105

401 037 5004

401 105 7909

401 105 0603

401 166 9904

401 167 1907

401 148 6006

401 105 5905

401 105 4205

401 105 0504

401 105 0603

401 105 7909

401 105 0603

401 167 1303

401 166 3100

401 105 7909

401 166 8303

401 105 7909

401 105 0702

401 105 5400

401 166 3308

401 105 7909

401 166 5302

401 166 5708

401 166 9409

401 037 5004

401 105 1006

401 105 0504

401 167 1402

401 166 3001

401 105 0702

401 105 2805

401 105 7909

401 166 7306

401 166 7108

401 166 9409

(CONNECTORS)

645 004 7183

645 024 8184

645 009 9892

645 024 8184

645 027 7085

Q5209

(INTEGRATED CIRCUITS)

CERAMIC 1000P K 50V

IC171

IC174

IC511

IC521

409 452 4206

409 423 6802

409 384 5807

(DIODES)

407 166 0606

407 210 5403

407 203 5601

(OSCILLATOR)

645 025 6004

645 030 0431

IC LV4127W

IC TK11245BM

IC MB3800PNF—G

CERAMIC

10U M 10V

1U M 6.3V

10U M 10V

1U Z 10V

D1701

D5101

D5102

D5201

DIODE MA365

DIODE RB551V-30

DIODE RB461F

R1701

R1702

R1703

R1704

R1705

R1706

R1707

R1708

R1709

R1710

R1711

R1712

R1713

R1714

R1715

R1718

R1720

R1721

R1722

R1725

R1726

R1727

R1732

R1761

R1762

R1763

R1764

R1766

R1767

R1768

R1772

R1775

R5101

R5103

R5104

R5105

R5106

R5107

R5108

R5144

R5200

R5201

R5205

R5206

R5207

R5213

R5214

R5215

R5216

R5217

R5218

MT-GLAZE 15K JA 1/16W

MT-FILM 15K DU 1/16W

MT-FILM 4.3K DU 1/16W

MT-GLAZE 15K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-FILM

X1701

OSC,CRYSTAL 3.579545MHZ,VPC-SX560 ONLY

OSC,CRYSTAL 4.433619MHZ,

EXCEPT VPC-SX560

27K DU 1/16W

47K DD 1/16W

1K DU 1/16W

(VARIABLE RESISTOR)

VR,SEMI,47K S

VR171

645 028 2294

(INDUCTORS)

645 035 7183

645 020 1875

645 036 5393

645 035 9453

645 033 8762

645 035 9453

645 033 8663

(CAPACITORS)

403 164 0204

403 332 9503

403 113 3805

403 139 7504

403 157 4202

403 155 1807

403 332 9503

403 157 7302

403 332 9503

403 283 6309

403 332 9503

403 155 1807

403 309 1301

403 333 3708

403 338 0405

403 283 6309

403 332 9503

403 113 3805

403 139 7306

403 207 0307

403 332 9503

403 155 1807

403 164 0204

403 281 5205

403 327 0300

403 164 0006

403 281 5205

403 207 0307

403 332 9503

403 334 3806

403 332 8209

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-FILM 6.8K DU 1/16W

L1701

L1702

L1703

L1704

L1707

L1708

L1709

L1710

L5101

L5102

L5201

L5202

INDUCTOR,10U J

INDUCTOR,1500 OHM

INDUCTOR,1000 OHM

INDUCTOR,5.6U M

INDUCTOR,47U K

MT-FILM

56K DD 1/16W

MT-GLAZE 2.2 JA 1/16W

MT-GLAZE 560 JA 1/16W

MT-GLAZE 33K JA 1/16W

INDUCTOR,5.6U M

INDUCTOR,10U K

MT-GLAZE

1K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

C1700

C1702

C1703

C1705

C1706

C1707

C1708

C1709

C1710

C1711

C1712

C1714

C1715

C1717

C1718

C1719

C1720

C1721

C1722

C1723

C1724

C1726

C1727

C1729

C1730

C1731

C1739

C1741

C1742

C1775

C1776

C1777

C1778

CERAMIC

0.1U Z 25V

1U M 6.3V

CERAMIC 1000P K 50V

CERAMIC

39P J 50V

220P J 50V

CERAMIC 0.01U K 25V

MT-FILM

MT-GLAZE 0.000 ZA 1/16W

MT-FILM 1.2K DU 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-FILM

MT-GLAZE 0.000 ZA 1/16W

MT-FILM

MT-FILM 4.3K DU 1/16W

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 1.2K JA 1/16W

MT-GLAZE

MT-FILM

MT-FILM 2.7K DU 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-FILM

MT-FILM 4.3K DU 1/16W

30K DU 1/16W

22K DU 1/16W

CERAMIC

CERAMIC 6800P K 50V

1U M 6.3V

CERAMIC

1U M 6.3V

1U Z 10V

1U M 6.3V

CERAMIC 0.01U K 25V

CERAMIC 0.068U K 16V

10 DC 1/16W

CERAMIC

10U M 10V

CERAMIC 0.47U K 25V

68 DC 1/16W

100 DU 1/16W

CERAMIC

1U Z 10V

1U M 6.3V

1K JA 1/16W

33K DU 1/16W

CERAMIC 1000P K 50V,VPC-SX560 ONLY

CERAMIC

18P J 50V,EXCEPT VPC-SX560

1U Z 16V

1U M 6.3V

CERAMIC 0.01U K 25V

CERAMIC

CERAMIC 0.22U Z 16V

CERAMIC 10U Z 25V

0.1U Z 25V

470 DU 1/16W

390 DU 1/16W

CERAMIC 0.068U Z 25V

CERAMIC 0.22U Z 16V

CN171

CN172

CN173

CN174

CN175

SOCKET,FPC 24P (N.S.P)

PLUG,26P

SOCKET,PWB-PWB 30(N.S.P)

PLUG,26P

PLUG,8P

CERAMIC

1U Z 16V

1U M 6.3V

10U K 6.3V

10U M 16V

(N.S.P)

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

CN176

CN512

645 038 1843

645 005 6901

(MISCELLANEOUS)

PULG,4P

(N.S.P)

VR503

VR504

VR505

VR506

VR507

645 028 2201

VR,SEMI,2.2K S

VR,SEMI,1K S

PLUG,SIDE-ZR-SM3 (N.S.P)

645 028 2201

645 019 5143

(INDUCTORS)

645 036 5362

645 033 8762

645 021 5315

645 030 5887

645 033 7918

645 036 5362

645 033 8663

645 033 8762

645 036 7496

645 033 8762

645 036 4938

Y1702

Y1703

Y1704

636 055 2982

636 058 2576

636 058 2019

SPACER SHIELD CA3,SIDE-B

SHIELD TAPE

L5001

L5002

L5003

L5004

L5006

L5007

L5009

L5010

L5011

L5012

L5014

L5015

L5017

L5018

L5401

INDUCTOR,6.2U M

INDUCTOR,47U K

INDUCTOR,110 OHM

INDUCTOR,1000 OHM

INDUCTOR,10U M

INDUCTOR,6.2U M

INDUCTOR,10U K

INDUCTOR,47U K

INDUCTOR,4.7U M

INDUCTOR,47U K

INDUCTOR,10U M

COMPL PWB,PW-1

636 059 7709

(SEMICONDUCTORS)

TR 2SC4617 R

Q5001

Q5002

Q5003

405 115 5207

405 148 3904

405 092 1100

405 092 1209

405 092 1407

405 092 1100

405 092 1209

405 092 1407

405 092 1100

405 092 1209

405 092 1407

405 148 7100

405 148 3904

405 150 5002

405 148 7100

405 115 5207

405 129 3008

405 129 2902

405 115 7201

405 148 6905

405 129 2308

405 129 2704

405 129 2308

405 115 6907

405 129 2308

405 129 3008

405 129 8409

405 129 3008

405 129 2308

405 129 3008

405 115 7508

405 115 6907

405 150 6603

405 150 5002

405 115 5207

405 158 0306

TR CPH3209

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR CPH6401

TR CPH3209

TR CPH3109

TR CPH6401

TR 2SC4617 R

TR UMD2N

Q5004

Q5005

(TRANSFORMERS)

TRANS,POWER,PULSE

T5001

T5401

T5402

645 040 0070

645 032 8831

645 031 6951

(CAPACITORS)

403 325 7608

403 323 6009

403 333 3708

403 335 1405

403 325 7608

403 323 6009

403 325 7608

403 343 3101

403 335 1405

403 320 0604

403 335 1405

403 343 3101

403 320 0604

403 335 1405

403 343 3101

403 309 2407

403 279 5002

403 276 1304

403 283 5708

403 320 0604

403 155 1807

403 342 7506

403 155 1807

403 343 3101

403 335 4703

403 155 1807

403 338 4403

403 155 2309

403 275 3002

403 169 2807

403 343 3101

403 345 3000

403 335 1405

403 345 3000

403 338 2904

403 343 3101

403 345 3901

403 338 2904

403 345 3901

403 345 3000

403 335 1405

403 338 4403

403 276 1304

Q5006

Q5007

Q5008

Q5009

Q5010

Q5011

Q5013

Q5014

Q5018

Q5020

Q5021

Q5022

Q5023

Q5024

Q5025

Q5026

Q5027

Q5028

Q5029

Q5030

Q5031

Q5032

Q5401

Q5402

Q5405

Q5406

Q5407

Q5409

TRANS,STEP UP

C5001

C5002

C5003

C5004

C5009

C5010

C5011

C5012

C5013

C5014

C5015

C5017

C5018

C5019

C5022

C5027

C5028

C5029

C5031

C5032

C5033

C5034

C5038

C5039

C5041

C5042

C5043

C5044

C5045

C5046

C5047

C5048

C5049

C5050

C5051

C5052

C5053

C5054

C5055

C5059

C5060

C5061

C5062

C5063

C5064

C5069

C5070

C5071

C5072

C5073

C5074

C5075

CERAMIC

1U K 16V

10U M 16V

10U M 10V

10U K 6.3V

1U K 16V

10U M 16V

1U K 16V

1U K 6.3V

10U K 6.3V

220P J 25V

10U K 6.3V

1U K 6.3V

220P J 25V

10U K 6.3V

1U K 6.3V

82P J 50V

TR UMH11N

TR DTC144EE

TR CPH3303

TR UMZ1N

TR UMH9N

TR UMZ1N

TR DTC114EE

TR UMZ1N

TR UMD2N

TR UMC2N

TR UMD2N

TR UMZ1N

TR UMD2N

TR DTC123JE

TR DTC114EE

TR CPH3210

TR CPH3109

TR 2SC4617 R

TR CY25AAJ-8

CERAMIC 4700P K 25V

CERAMIC 1000P K 50V

CERAMIC 2200P K 50V

CERAMIC

220P J 25V

CERAMIC 0.01U K 25V

CERAMIC 1000P J 50V

CERAMIC 0.01U K 25V

(INTEGRATED CIRCUITS)

IC501

IC502

IC504

409 417 8300

409 466 6203

409 301 5507

(DIODES)

IC LA5627W

IC TK73200

IC TC7S08FU

CERAMIC

1U K 6.3V

D5001

D5002

D5003

D5004

D5005

D5006

D5007

D5008

D5009

D5010

D5011

D5012

D5013

D5015

D5402

D5403

D5404

D5405

D5407

D5410

407 203 5809

407 201 2701

407 149 0807

407 203 5809

407 201 2701

407 205 5203

407 201 2701

407 162 8507

407 210 9401

407 210 5403

407 202 0300

407 122 2606

407 202 0102

407 199 4503

407 162 8507

DIODE F02J9

CERAMIC 0.22U K 6.3V

CERAMIC 0.01U K 25V

DIODE RB051L-40

DIODE 1SS355

DIODE F02J9

DIODE RB051L-40

DIODE RB521S-30

DIODE RB051L-40

DIODE DAN222

DIODE RB491D

DIODE RB551V-30

DIODE F1F16

CERAMIC

0.1U K 16V

CERAMIC 4700P K 50V

CERAMIC 0.047U K 16V

CERAMIC

330P J 50V

1U K 6.3V

POS-SOLID 47U M 6.3V

CERAMIC

10U K 6.3V

POS-SOLID 47U M 6.3V

CERAMIC 0.47U K 10V

CERAMIC

1U K 6.3V

DIODE SFPM-64

DIODE F1SN4

DIODE CR08AS-8-T1

DIODE DAN222

3.3U M 6.3V

CERAMIC 0.47U K 10V

CERAMIC

POS-SOLID 47U M 6.3V

3.3U M 6.3V

CERAMIC

10U K 6.3V

0.1U K 16V

(VARIABLE RESISTORS)

645 028 2249 VR,SEMI,3.3K S

VR501

CERAMIC 1000P K 50V

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

401 274 9704

DESCRIPTION

C5076

C5077

C5081

C5401

C5403

C5404

C5406

C5407

C5409

C5410

C5411

C5412

C5414

403 335 1405

CERAMIC

10U K 6.3V

R5069

R5070

R5071

R5072

R5073

R5074

R5075

R5076

R5077

R5080

R5084

R5085

R5086

R5087

R5088

R5089

R5090

R5092

R5093

R5094

R5095

R5096

R5097

R5098

R5401

R5408

R5409

R5410

R5411

R5412

R5413

R5414

R5417

R5418

R5419

R5422

R5423

R5424

R5425

R5426

R5429

R5470

MT-GLAZE 24K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 1.2K DC 1/16W

MT-GLAZE 39K JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 33K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 820 JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 2.7K JA 1/16W

403 335 1405

403 345 3000

403 350 2005

403 276 1304

403 343 3101

403 276 1007

403 284 7701

403 341 4407

403 330 5903

404 077 5805

403 279 5002

(RESISTORS)

401 269 3908

401 262 1000

401 224 9006

401 262 5602

401 263 2006

401 226 1503

401 037 9101

401 224 9006

401 235 1402

401 261 1508

401 224 9006

401 038 8400

401 262 1000

401 262 1703

401 262 1307

401 262 1000

401 263 1900

401 038 8400

401 224 9006

401 235 1402

401 225 1405

401 226 1503

401 225 1405

401 224 9501

401 224 8900

401 261 1508

401 224 9303

401 257 4009

401 235 1402

401 224 9006

401 037 9101

401 262 1000

401 269 3908

401 224 8900

401 037 5400

401 225 0200

401 224 8900

401 224 9501

401 225 0705

401 261 1508

401 224 9303

401 283 8903

401 224 9303

401 261 1508

401 037 5400

401 224 8900

401 262 2304

401 224 9402

401 262 5206

401 258 9102

401 258 9300

401 258 0406

401 224 9402

401 258 0406

401 258 9300

401 224 9402

401 258 0406

401 258 9300

401 258 0406

401 258 9300

401 263 1702

401 225 1702

401 225 1306

401 226 1503

401 225 1405

401 226 1503

401 224 9006

401 225 0507

401 224 9006

401 240 9509

401 224 8900

401 225 1405

401 224 9600

401 224 9303

401 229 3900

401 224 9105

401 037 5202

401 224 9006

401 227 2400

401 224 9006

401 224 9303

402 078 4407

401 226 5402

401 262 1208

402 079 0200

401 225 0309

401 226 5402

402 077 7409

401 225 9005

401 224 9006

401 224 9303

(PROTECTORS)

645 029 2408

645 029 2378

645 029 2415

(JACK)

POS-SOLID 47U M 6.3V

CERAMIC 0.15U K 10V

CERAMIC 1000P K 50V

CERAMIC

1U K 6.3V

CERAMIC 0.01U K 16V

CERAMIC 0.033U Z 16V

CERAMIC 0.047U K 350V

CERAMIC 0.01U K 500V

ELECT

CERAMIC 4700P K 25V

60U A 330V

R5001

R5002

R5003

R5004

R5005

R5006

R5007

R5010

R5011

R5012

R5013

R5014

R5015

R5016

R5017

R5018

R5019

R5020

R5021

R5022

R5023

R5024

R5025

R5026

R5027

R5028

R5029

R5030

R5031

R5033

R5034

R5035

R5036

R5038

R5039

R5040

R5041

R5042

R5043

R5044

R5045

R5046

R5047

R5048

R5049

R5050

R5051

R5052

R5053

R5054

R5055

R5056

R5057

R5058

R5059

R5060

R5061

R5062

R5063

R5064

R5065

R5066

R5067

R5068

MT-GLAZE 4.7K DC 1/16W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 56K DC 1/16W

MT-GLAZE 8.2K DC 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 180 JA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

1K JA 1/16W

MT-GLAZE 180 JA 1/16W

MT-GLAZE 150 JA 1/16W

MT-GLAZE 100 JA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

62 JA 1/10W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 2.7K DC 1/16W

MT-GLAZE 2.4K DC 1/16W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 3.3K DC 1/16W

MT-GLAZE

MT-GLAZE 10K JA 1/16W

MT-GLAZE 1K JA 1/16W

MT-GLAZE 10M FKG 1/8W

MT-GLAZE 56 JA 1/16W

MT-GLAZE 82K DC 1/16W

MT-GLAZE 220K JKG 1/8W

15 JA 1/16W

MT-GLAZE

62 JA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE

33 JA 1/16W

56 JA 1/16W

MT-GLAZE 100K JKG 1/8W

MT-GLAZE 470K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

1K JA 1/16W

PR501

PR502

PR503

PR504

PR505

PR506

PROTECTOR,IC 2A 24V

PROTECTOR,IC 1.5A 32V

PROTECTOR,IC 2.5A 16V

MT-GLAZE

1K JA 1/16W

MT-GLAZE 68K DC 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 180 JA 1/10W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 4.7K DC 1/16W

MT-GLAZE 100K JA 1/16W

JK501

645 027 7030

(CONNECTORS)

645 035 5424

636 055 9929

SOCKET,DC

CN501

CN502

SOCKET,PWB-PWB 30(N.S.P)

ASSY,WIRE BAT&PW1-SX112 (N.S.P.)

COMPL PWB,SY-1

MT-GLAZE

1K JA 1/10W

636 059 2315

MT-GLAZE 3.3K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 56K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

(SEMICONDUCTORS)

Q3001

405 078 6105

405 096 1205

405 119 1007

405 078 6105

405 096 1205

405 119 1007

405 078 6709

405 096 2400

405 102 5005

405 115 6907

405 129 2209

405 106 4707

405 129 2209

405 106 4707

405 102 5609

405 092 4101

405 115 5702

TR 2SA1677

TR DTA124EU

TR UN5112

TR 2SA1677

TR DTA124EU

TR UN5112

TR 2SC4396

TR DTC144EU

TR UN5213

Q3002

Q3003

Q3004

Q3071

Q3072

Q3073

Q3076

MT-GLAZE

MT-FILM 0.22 FA 1/4W

MT-GLAZE 1K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 1K JA 1/10W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 1.5K DC 1/16W

MT-GLAZE 5.6K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

1K JA 1/16W

TR DTC114EE

TR UMX1N

TR XP4501

TR UMX1N

TR XP4501

TR 2SD1819A-R

TR 2SC4081-R

TR DTA144EE

(INTEGRATED CIRCUITS)

410 370 8900 IC UPD78062GC-A27-8EU

IC301

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

401 105 5400

DESCRIPTION

IC302

IC303

IC311

IC312

IC313

IC314

IC315

IC316

409 383 1008

S-8423NFS

IC S-8324A50MC-EPE

IC TK11331BM

IC LMV321M7X

IC TPA301D-SOL008-P-0150

IC LMV321M7X

IC TC7S32FU

R3006

R3007

R3010

R3011

R3012

R3014

R3015

R3016

R3017

R3018

R3021

R3022

R3023

R3024

R3025

R3026

R3041

R3042

R3043

R3051

R3052

R3053

R3056

R3101

R3102

R3103

R3104

R3105

R3106

R3107

R3108

R3109

R3120

R3121

R3122

R3123

R3136

R3137

R3138

R3139

R3141

R3142

R3143

R3144

R3145

R3146

R3147

R3149

R3150

R3151

R3152

R3153

R3154

R3155

R3157

R3161

R3162

R3163

R3164

R3166

R3167

R3168

R3170

R3171

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-FILM 100K DD 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100K JA 1/16W

410 298 3605

409 407 0505

409 432 2505

409 446 7305

409 432 2505

409 301 5309

(DIODES)

401 105 0603

401 105 5400

401 167 2508

401 105 0702

401 105 5400

401 105 0603

401 105 0702

401 105 0504

401 105 4205

401 105 5202

401 105 2706

401 105 5202

401 105 0702

401 105 0504

401 105 7909

401 105 2805

401 105 0603

401 105 0405

401 105 5301

401 105 0504

401 105 3406

401 105 2805

401 105 0702

401 105 0504

401 105 7909

401 105 4304

401 105 4106

401 105 4304

401 105 4106

401 105 7909

401 105 1006

401 105 7909

401 105 0603

401 105 7909

401 105 2102

401 105 1105

401 105 7909

401 105 0702

401 105 6605

401 113 6208

401 105 1105

401 105 5400

401 105 4809

401 105 0603

401 105 7909

401 113 6703

401 105 2003

401 105 1006

401 105 4304

401 105 5202

401 105 4304

(SWITCHES)

645 029 5911

645 035 6599

(CONNECTORS)

645 035 5424

645 037 7778

645 035 8425

645 002 2876

D3024

D3041

D3042

D3051

D3061

D3062

D3063

D3064

D3065

D3066

D3067

D3068

D3069

D3070

D3073

407 162 8507

407 199 1809

407 187 6304

407 149 0807

407 210 5403

407 188 9809

407 179 1805

407 149 0807

(OSCILLATORS)

645 034 8006

645 034 7993

(INDUCTOR)

645 010 0987

(CAPACITORS)

403 145 9905

403 338 4403

403 113 3805

403 155 1807

403 338 4403

403 316 1400

403 338 4403

403 274 0903

403 338 4403

403 332 9503

403 338 4403

403 324 3502

403 332 9503

403 322 3504

403 332 8209

403 073 4409

403 334 3806

403 155 1807

403 073 1200

403 332 9503

403 338 4403

403 155 1807

403 332 9503

403 281 2402

403 332 9503

403 281 5007

403 332 9503

403 334 3806

403 281 5007

403 332 9503

(RESISTORS)

401 105 4106

401 105 5400

401 105 0603

401 105 4304

401 105 5400

DIODE DAN222

MT-GLAZE

1K JA 1/16W

LED SML-020MLT, VF LED

LED SML-110VT, SELF TIMER LED

DIODE 1SS355

MT-GLAZE 33K JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 220 JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 100K JA 1/16W

DIODE RB551V-30

DIODE MA742

DIODE DAP222

DIODE 1SS355

MT-GLAZE

1K JA 1/16W

DIODE 1SS355

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100 JA 1/16W

MT-GLAZE 4.7K JA 1/16W

X3001

X3002

OSC,CERAMIC 4.00MHZ

OSC,CRYSTAL 32.768KHZ

L3061

INDUCTOR,100U K

MT-GLAZE

1K JA 1/16W

MT-GLAZE 27K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 100K JA 1/16W

C3001

C3002

C3003

C3004

C3005

C3006

C3008

C3009

C3051

C3053

C3054

C3055

C3056

C3057

C3058

C3061

C3062

C3101

C3102

C3103

C3104

C3105

C3106

C3107

C3108

C3109

C3111

C3112

C3113

C3115

C3116

C3118

C3119

C3120

C3121

C3122

C3123

C3124

C3125

C3127

C3128

C3129

CERAMIC

CERAMIC 1000P K 50V

CERAMIC 0.01U K 25V

22P J 50V

0.1U K 16V

MT-GLAZE

1K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GALZE 3.3K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GALZE 3.3K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 1.2K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 18K JA 1/16W

MT-GLAZE 12K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 6.8K JA 1/16W

MT-GLAZE 3.6K JA 1/16W

MT-GLAZE 12K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 390K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 9.1K JA 1/16W

MT-GLAZE 1.8K JA 1/16W

MT-GLAZE 1.2K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 330K JA 1/16W

CERAMIC

TA-SOLID

CERAMIC

0.1U K 16V

560P J 25V

0.1U K 16V

22U M 6.3V

0.1U K 16V

1U M 6.3V

0.1U K 16V

DL-ELECT 0.1F Z 5.5V

CERAMIC

1U M 6.3V

22U Z 10V

10U M 16V

CERAMIC 0.039U K 50V

CERAMIC 10U K 6.3V

CERAMIC 0.01U K 25V

CERAMIC 0.033U K 50V

CERAMIC

1U M 6.3V

0.1U K 16V

CERAMIC 0.01U K 25V

CERAMIC

1U M 6.3V

CERAMIC 0.22U K 16V

CERAMIC

1U M 6.3V

CERAMIC 0.033U K 25V

CERAMIC

1U M 6.3V

10U K 6.3V

CERAMIC 0.033U K 25V

S3001

S3002

SWITCH,SLIDE 1P-3T,

SWITCH,PUSH, INFO

CERAMIC

1U M 6.3V

CN301

CN302

CN303

CN310

SOCKET,PWB-PWB 30(N.S.P)

PLUG,2P

SOCKET,FPC 16P (N.S.P)

PLUG,2P (N.S.P)

(N.S.P)

R3001

R3002

R3003

R3004

R3005

MT-GALZE 3.3K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GLAZE 47K JA 1/16W

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

ACCESSORIES

645 043 5492

645 044 8249

645 037 0205

645 036 4129

645 036 7434

645 036 9896

645 028 8944

645 028 8951

645 028 8920

BATTERY CHARGER,VPC-SX560E ONLY

BATTERY CHARGER,EXCEPT VPC-SX560E

BATTERY,RECHARGE,COMP. (1.2V,NI-MH)

CORD,POWER-1.2MK,VPC-SX560EX ONLY

CORD,POWER-1.2MK,VPC-SX560E ONLY

CORD,POWER-1.8MK,VPC-SX560 ONLY

CABLE,DSC A/V [(1) AV cable]

CABLE,DSC DOS/V

[(2) Computer serial port interface cable]

CABLE,DSC DOS/V

645 028 8937

645 017 7200

645 020 3718

645 020 3725

645 020 7129

[(2) Computer serial port interface cable]

CABLE,MINI 8P&D-SUB 9P,EXCEPT

VPC-SX560E[(3) Adapter for Macintosh computer]

CABLE,MINI 8P&D-SUB 9P,EXCEPT

VPC-SX560E[(3) Adapter for Macintosh computer]

CABLE,MINI 8P&D-SUB 9P,EXCEPT

VPC-SX560E[(3) Adapter for Macintosh computer]

CABLE,MINI 8P&D-SUB 9P,EXCEPT

VPC-SX560E[(3) Adapter for Macintosh computer]

CABLE,DSC USB [(4) USB interface cable]

CASE SOFT-SX113/J

645 040 2807

636 057 8968

636 056 1007

645 037 2322

645 037 2339

645 043 5553

STRAP HAND-SR662/J

CARD,CF (CompactFlash),EXCEPT VPC-SX560E

DISC,CD-ROM CEL SUSP52 E

[Sanyo Software Pack 5.2]

645 043 5546

DISC,CD-ROM MGI [MGI PhotoSuite 3]

INSTRUCTION MANUAL [CAMERA]

(English, French, Spanish)

9112

9113

9114

9115

9118

636 060 0270

636 060 0287

636 059 1073

636 060 0294

636 060 0300

INSTRUCTION MANUAL

[Sanyo Software Pack 5.2] (English)

INSTRUCTION MANUAL PDF

(English, French, German, Spanish)

INSTRUCTION MANUAL [MGI PhotoSuite 3]

(English, French, German, Spanish)

INSTRUCTION MANUAL [CAMERA]

(German),EXCEPT VPC-SX560

PACKING MATERIALS

636 060 4353

636 059 8706

636 059 8690

CARTON CASE INNER-SX114/E,

VPC-SX560E ONLY

CARTON CASE INNER-SX114/U,

VPC-SX560 ONLY

CARTON CASE INNER-SX114EX,

VPC-SX560EX ONLY

636 060 6036

636 060 4377

636 060 4384

CUSHION SHEET-SX354/JO

REINFORCEMENT PAD,A-114EX (BOTTOM)

REINFORCEMENT PAD,B-114EX (TOP)

SANYO Electric Co.,Ltd.

Osaka, Japan

Nov/ '00 / 4760 MI Printed in Japan

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERALL WIRING

Download from Www.Somanuals.com. All Manuals Search And Download.

Raymarine Two Way Radio Ray215e User Guide
Raypak Swimming Pool Heater 185B User Guide
Regency Indoor Fireplace I2400M User Guide
Ricoh Camcorder RICOH THETA m15 User Guide
RIDGID Sander R2610 User Guide
Roberts Radio Clock Radio CR9901 User Guide
Sakar Digital Camera 68379 User Guide
Samsung DVD Player 20030516154437687 User Guide
Samsung Home Theater System HT C5200 User Guide
Sanyo Digital Camera VPC T1284 User Guide