Netw ork Pan-Focus PTZ
Dom e Cam eras
VDC-DPN9585P
VCC-PN9575P
Network Indoor Mini
Dom e Cam era
Network Vandal-Resistant
Day/Night Dom e Cam era
VCC-PN9575P
VDC-DPN9585P
• Ne t w o rk e d S u rve illa n c e w it h
Tw o -Wa y Vo ic e Co m m u n ic a t io n s
Built-in X2.6 Motorized Zoom
Pan-Focus Lens
• P o w e r-o ve r-Et h e rn e t (P o E)
(f = 2.8–7.3 m m , F = 1.9–3.0) No focus adjustm ents
S u p p o rt e d (IEEE 8 0 2 .3 a f Co m p lia n t )
• P TZ Co n t ro l & Re m o t e Ca m e ra
S e t t in g via Ne t w o rk o r VAC-7 0
• 25 IPS, High-Resolution
Im a g e S e le c t io n
• Va n d a l-Re s is t a n t *
• IP 6 6 Ra t e d En c lo s u re *
*VDC-DPN9585P
Pan-focus lens im age
Varifocal lens im age
The products introduced here are manufactured in Japan
utilizing advanced technologies and quality control.
Comparative images are representations only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Network 1/4” Color CCD DSP
High-Resolution PTZ Dom e Cam era
VCC-PN9575P
SANYO Security System s for the Creation of a
Full-fledged LAN or Internet
Video captured by cam era can be viewed using the bundled
VA-SW3050LITE viewer software. Use of the VA-SW3050 archiving
software (sold separately) allows sim ultaneous m onitoring of stream s
from up to 128 cam eras as well as recording of
live audio and video data.
* Use of the VDC-DPN9585P’s or the VCC-PN9575P’s built-in
networking features allows viewing of video from a single
cam era with a generic web browser (Internet Explorer).
Netw orked Centralized Control
of Data from a Variety of
Surveillance Points
I
N
T
E
R
N
E
T
Managem ent of video from surveil-
lance points under a variety of con-
ditions — whether outdoors, at re-
m ote locations, or at night — can
be consolidated at a PC in a control
center. This enables efficient opera-
tion of 24/7 system s and broad-
based surveillance for retail outlets
or large-scale facilities.
Digital Im age Processing Suited to
Netw orked Output
Im age processing of J PEG im ages offer-
ing versatility has been adopted for trans-
m ission of high-quality im ages. This light-
ens the burden placed on the network
and increases precision in surveillance.
Alarm Notification Functions
Two-Way Voice Transmissions between Camera and PC
When a potential security threat is detec-
ted, a single surveillance video im age
from that m om ent is sent by em ail as an
alarm notification. Em ail addresses can
be set in advance so that notification is
sent to up to five locations.
Two-way com m unications inclusive of voice exchanges
between a control room and surveillance points allow instruc-
tions issued from the control room to surveil-
lance points while viewing im ages sent from
cam eras or, conversely, voicing of opinions from
surveillance points to the control room .
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Com m unications
VDC-DPN9585P/ VCC-PN9575P
Surveillance-Point Monitoring w ith
Audio Transm ission from
Video and Audio Data
Control Center PC to Surveillance Point
The VDC-DPN9585P and the VCC-PN9575P are equipped to
enable two-way voice communications via audio signals sent
between cameras and PCs. Transmission of crystal clear
images together with audio offers those overseeing
surveillance as a sense of being right there at the scene.
Audio transmissions can be sent from the administrator’s side
to the camera so as to provide advice or cautionary notices in
the event of unaccounted for activity and other events during
surveillance. Voice exchanges with personnel at surveillance
points not only enable a more accurate grasp of the situation
but also serve to prevent crimes or accidents.
Monitor
Speaker
Video and Audio Data
Camera
Audio Data / Power Supply* / Mechanical Control
Speaker
LAN cable
Microphone
PC
Microphone
• The VCC-PN9575P features a built-in microphone.
• Both the VDC-DPN9585P and the VCC-PN9575P can be connected to external microphones, speakers and monitors.
* Power adapter required.
Connection Exam ples
• LAN cable types required will vary according to the switching hub or
router used.
• Do not use the camera’s power supply when using PoE.
• The VA-50H heater board (sold separately) for use with the VDC-
DPN9585P cannot be used when using PoE.
Both the VDC-DPN9585P and the VCC-PN9575P support the
IEEE 802.3af standard for Power-over-Ethernet (PoE) applica-
tions to allow power supplied over LAN cabling. In addition to
making installation easier, this allows camera installation in
places where it would otherwise be difficult to secure a pow-
er source.
PoE Exam ple 1:
PoE Exam ple 2:
Use of Power Adapter and Port-Switching Hub
Use of PoE Supported Switching Hub
LAN Cable (Straight Type)
Up to 100 Meters
LAN Cable (Straight Type)
Up to 100 Meters
Speaker
Switching Hub
Speaker
Video Output
(BNC Connector)
TV Monitor
Speaker
PoE Supported
Switching Hub
PC
Video Output
(BNC Connector)
TV Monitor
Speaker
PC
Microphone
Microphone
PoE Supported
Adapter
Audio Output
(3.5 mm Mini Jack)
Video/Audio Data
+ Power Supply
Audio Output
(3.5 mm Mini Jack)
LAN Cable (Straight Type)
External Mic Intput
Microphone (3.5 mm Mini Jack)
Video/Audio Data + Power Supply
Audio Sent to Camera Side
Audio Confirmed on PC Side
External Mic Intput
Microphone ( 3.5 mm Mini Jack)
Audio Sent to Camera Side
Audio Confirmed on PC Side
• Longer transmission distances are possible than those using a power adapter
and a switching hub as in example 1.
Exam ple of Use w ithout PoE
Basic Connection
Connection by LAN cabling (crossed type)
LAN Connection
Connection of camera to LAN by LAN cable
Internet Connection
Connection of camera and router by LAN cable
between camera and PC.
(straight type) using switching hub, etc.
or ADSL modem, etc. when used for LAN connection.
Switching Hub
Router or ADSL Modem
LAN Cable
(Crossed Type)
LAN Cable
(Straight Type)
PC
LAN
Internet
AC Adapter
AC Adapter
AC Adapter
• Router connected using straight type cabling.
• Confirm connection method when connecting
an ADSL modem or other device.
• Please use a type of LAN cabling that is shielded.
Download from Www.Somanuals.com. All Manuals Search And Download.
Netw ork Archiving Softw are
(Sold separately)
VA-SW3050
The VDC-DPN9585P and the VCC-PN9575P are bundled with
VA-SW3050LITE viewer software allowing live video streams
sent from cameras to be monitored on a PC. This software
also supports audio transmissions and remote control of cam-
eras, making it excellent for smooth configuration and man-
agement of surveillance systems.
Main window
VA-SW3050 network archiving software is sold separately in
answer to needs for archiving of surveillance video and audio
captured by cameras. With a PC used as a local server, the
VA-SW3050 software enables not only data playback and re-
cording but also improved system operability, making it a
powerful tool for network management.
Sim ultaneous Recording from Up to 128 Cam eras
VA-SW3050 software simultaneously records video and audio
data from up to 128 cameras. High-resolution images are
recorded at a rate of 25 IPS* for smooth playback comparable
with television.
Camera layout setting
*CPU: Pentium 4, 3.06 GHz or higher, Memory: 512 MB RAM
Picture setting: BASIC, Picture size: 720 x 286, Single camera connection
Surveillance Cam era Control via Netw ork
Setting of camera IDs allows precise condition setting for
each surveillance point. Also enabled is control of panning, tilt-
ing, zooming and other camera functions.
Camera control
Sim ultaneous Access by Up to 16 Users
Recorded video and audio can be accessed by up to 16 users
simultaneously. User access is managed by password to
differentiate those at the administrator level, with the authori-
ty to alter settings, and those at the user level, with the right
to monitor surveillance video and audio.
16-screen display
Other Features
• Display switching between full, quad or 16 split screen
• Simultaneous playback and recording of video and audio
• Flexible settings with a wide array of recording modes
• Easy-to-use graphical interface
VA-SW3050LITE/ VA-SW3050 System Requirem ents
PC
OS
IBM PC/AT and compatibles
Windows® 2000 Professional SP4, Windows® XP Home Edition
SP2, Windows® XP Professional SP2
• Time data search function
CPU/
Mem ory
When the num ber of cam eras connected is 4 or fewer:
CPU: Pentium® 4, 2.0 GHz or higher, Memory: 512 MB or more
When the num ber of cam eras connected is between 5 and 16:
CPU: Pentium® 4, 3.0 GHz or higher, Memory: 1 GB or more
MEMO (VA-SW3050):
• Alarm search function
• Timer recording
When you record live video from 17 or more cameras simultane-
ously on a single PC, recording performance may be diminished
depending on your monitoring system configuration. In such
cases, add PCs used for recording so that the number of cameras
to record simultaneously per PC becomes 16 or fewer.
VA-SW3050LITE/ VA-SW3050 Feature Com parison
VA-SW3050LITE VA-SW3050
(Bundled)
Max. 128
Max. 16
Yes
(Sold separately)
Num ber of cam eras supported
Num ber of users supported
Search cam era
Max. 128
Max. 16
Yes
Network
interface
100Base-TX
Display card 1024 x 768 pixels or higher, 16 million colors or higher
AGP graphics card supporting hardware overlay
or PCI Express graphics card (Requires the latest DirectX 9.0c
compatible driver.)
Live m onitor
Yes
Yes
Cam era control PTZ, etc.
Menu
Yes
Yes
Yes
Yes
Recom m ended graphics chip
ATI: RADEON 9000 series or higher
nVidia: GeForce 4 series or higher
Quadro 4 series or higher
Matrox: MillenniumP series or higher
Recording
No
Yes
Playback
No
Yes
Video search
No
Yes
Backup/Restore
Download/Print
No
Yes
Audio
Sound card and speakers with 100% DirectX compatibility
No
Yes
Com ponent DirectX 9.0c
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions Specific to the
VDC-DPN9585P/ VCC-PN9575P
Intelligent Backlight Com pensation
The VDC-DPN9585P and VCC-PN9575P feature two selectable
backlight compensation modes: multi-spot metering (applied to
the whole screen) and center-zone metering (applied to the
central portion only).
Multi-spot metering measures luminous intensity in 64 areas on screen to enable
optimal backlight compensation even for peripheral and moving objects.
Flexible Motion Detection
16 Preset Positioning and
Sequential Monitoring
Functions
Up to 16 preset positions (with
different settings for pan, tilt and
zoom) can be registered for a
single VDC-DPN9585P or VCC-
PN9575P. A simple key entry to
Sensing is performed by splitting the field of view into 16
areas. Movement and brightness levels within the picture are
analyzed to accurately detect surveillance targets. Upon detec-
tion, the camera sends an alarm status signal and captures the
object at zoom magnifications of up to x2.6. Fine adjustments
of settings such as sensitivity, tracking time, zoom ratio and
areas not requiring detection can also be made.
a controller allows you to easily switch to the scene you want to
monitor. Auto-pan monitoring can be also be programmed by
designating two end points on a horizontal plane.
x2.6
PTZ Operations
Both the VDC-DPN9585P and VCC-PN9575P come with a PT
mechanism and allow panning of 335 degrees (110 degrees*)
and tilting of 90 degrees (90 degrees*) to reduce blind spots in
the surveillance area. When particular angles are preset on the
camera (up to sixteen points), it moves to each position quick-
ly at the speed of 120 deg/sec. max. for both panning and tilt-
ing. Combining these features with the motion detector, it is
possible to catch all actions taking place in the area.
Areas with swaying trees or flickering light, etc. can be eliminated to avoid false
alarms. Surveillance of the detected object can be conducted at a zoom magnification
of x1.0, x1.4, x2.0 or x2.6.
Privacy Masking (Up to 8
Masks)
When there is a house or even
*For wall-mounted cameras
Photos of VDC-DPN9585P
an object as small as a window
within the camera frame, it is
possible to mask the area so that
it will not appear on the monitor
screen to protect other’s privacy.
Up to 8 rectangular masks of arbitrary size can be set. These
masking areas may be protected with a 4-digit (max.) password.
Ceilling m ounting
Wall m ounting
520 TV Line Resolution (Analog Video Signal)
Panning
Tilting
0 to 335°
0 to 90°
Panning
Tilting
–55 to 55°
0 to –90°
Featuring SANYO’s DSP circuitry and a high performance 1/4-
inch CCD for horizontal resolution of more than 520 TV lines
and superior color reproduction. Sharp, crisp images are
delivered for greater precision in surveillance under a varied
range of conditions.
Adjustm ent via VAC-70 Control Unit (Sold Separately)
Connection of the VAC-70 control unit allows adjustment of
pan/tilt, angle of view, motion detector, backlight compensa-
tion and other functions from in front of a monitor. The lens
angle can be adjusted directly via a control
Built-in Electronic Shutter
A high-speed electronic shutter that is internally switchable for
eight modes using a DIP switch allows adjustment increments
from 1/50 to 1/10,000 sec.
switch inside the camera housing.
Video coaxial cable
VDC-DPN9585P
Operation on PoE, AC or DC Pow er Sources
The VDC-DPN9585P and VCC-PN9575P can operate on PoE,
12 V DC (12–15V DC) or 24 V AC (50 Hz, and even at a toler-
ance of ±10% ). Switching to the correct mode occurs auto-
matically when power is supplied.
Control switch
inside cam era
VAC-70
Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions Specific to the
VDC-DPN9585P
Intelligent Sw itching from Color to B/ W
Tough Die-Cast Alum inum w ith
Polycarbonate Dom e
Proprietary auto-sw itching
Sw itchover point
Housed in an exceptionally tough die-cast
aluminum enclosure and a polycarbonate
dome for extra durability under the most demanding of condi-
tions. To protect against tampering, the screws of the enclo-
sure cover have a unique shape that prevents it from being
opened with ordinary tools.
infrared cut filter
3~9 lx
High m ode
Low m ode
Color mode IR cut filter ON
B/W
m ode
B/W
m ode
1~3 lx
(Approx.)
IP66 Rated Weatherproof Design
Tim e
B/W m ode
Color m ode
Switching between color mode during daylight hours and
monochrome at night is done automatically (manual switching
also possible). Selection of switching settings can be made
from a range of 1 to 10 lx.
High Sensitivity,
Minim um Required
Illum ination
B/W m ode Color m ode
Gain: High
Gain: High
(F1.9, 20 IRE) 0.024 lx
0.48 lx
1.2 lx
(F1.9, 50 IRE)
0.06 lx
User-Friendly Design and Easy Setup
VDC-DPN9585P/ VCC-PN9575P
Installation, Setup and Operation Made Easy by
Sim ple, User-Friendly Design
Easy Interior Access and Setup
Inside the housings of the VDC-DPN9585P and VCC-PN9575P
are camera units with integrated motors and lenses. Installation
on ceilings or walls can be accomplished without difficulty and
components such as the camera unit or an optional heater
board* can be attached and detached easily in just a few steps.
*The heater board option can be mounted only in the VDC-DPN9585P.
Based on a development concept featuring a pan-focus lens for
the realization of advanced surveillance functions together with
enhanced operability and ease of installation. The VDC-DPN9585P
and VCC-PN9575P increase lens function and camera maneuver-
ability to simplify operation, save resources spent in installation
and substantially heighten the available degree of freedom.
Mounting and Installation
The product pictured below is the VDC-DPN9585P. Specifications differ slightly in the case of the VCC-PN9575P.
Please refer to the operating instructions supplied with each product for details.
The camera unit and board
can be attached or detached
by simply sliding the stopper.
Attach the camera unit to the bottom
cover mounted at the surveillance
point (ceiling or wall).
Set up and adjust according to the installation site.
Note: In the case of a wall mounted setup, hold down the clamp and
release the hooks, then lift the camera unit and turn it 90° to attach it.
Wall mounting
In the case of the VCC-PN9575P
Push
Bottom
cover
Base
plate
Ceilling mounting
Hold down the button on the side of the housing and
detach the base plate from the back of the camera.
Set up and adjust according
to the installation site.
Installation is completed by simply
attaching the camera to the base plate.
Mounting Brackets (Options)
Attachm ent
Attachm ent
Wall m ounting bracket
Ceiling suspension bracket
VA-50AL (for VDC-DPN9585P)
VA-50AS (for VCC-PN9575P) VA-50BW
VA-50BPL
ø120 (4.72)
VA-50BPS
ø120 (4.72)
8.0 (0.31)
209 (8.23)
22.4 (0.88)
0.5
22.4 (0.88)
(0.02)
42.0
ø120 (4.72)
(1.65)
66.7
(2.63)
4.5 (0.18)
ø150 (5.91)
93°
3.4 (0.13)
M4 8 4
205 (8.07)
6 (0.24)
R154.9
(6.10)
6 (0.24)
82.5
83.5 (3.29)
R151.9
(5.98)
41.7 (1.64)
(3.25)
22.8
46.0
(1.81)
<M25 15>
(0.90)
45.5
(1.79)
22.8
(0.90)
R18.7 (0.74)
6 (0.24)
83.5 (3.29)
83.4
(3.28)
M24 *P-1.5
M6 *6-2
M24 *P-1.5
0.3 (0.01)
6 (0.24)
Model nam e
Installation
Wall mounting
Attachm ent + Brackets
M24 *P-1.5
66.7
(2.63)
83.5 (3.29)
VA-50AL
VA-50AL
VA-50AL
VA-50AS
VA-50AS
VA-50AS
+ VA-50BW
+ VA-50BPL
+ VA-50BPS
+ VA-50BW
+ VA-50BPL
+ VA-50BPS
ø7–4 (0.28–0.16)
ø120 (4.72)
6 (0.24)
VDC-DPN9585P Long ceiling mounting
Short ceiling mounting
66.7
(2.63)
ø7–4 (0.28–0.16)
ø120 (4.72)
Wall mounting
VCC-PN9575P
Long ceiling mounting
Short ceiling mounting
[Unit: mm (inch)]
Note: Attachments and brackets presented are for indoor use.
In cases of outdoor use, measures must be implemented to ensure waterproofing.
Download from Www.Somanuals.com. All Manuals Search And Download.
VDC-DPN9585P / VCC-PN9575P
Specifications
[Unit: mm (inch)]
VCC-PN9575P
Dim ensions
Model No.
Scanning system
Image sensor
Number of pixels
Horizontal resolution
Day/Night mode
Minimum illumination
(approx.)
VDC-DPN9585P
NTSC standard 625 lines, 50 fields/sec.
VCC-PN9575P
VDC-DPN9585P
ø162.0 (6.5)
ø150.6 (6.0)
1/4” Interline transfer method CCD (3.6 x 2.7 mm)
Total: 759 (H) x 596 (V), Effective: 752 (H) x 582 (V)
More than 520 TV lines (Analog video signal)
35.0
(1.4)
Auto (low/high)
—
Color, B/W: external control
Gain high: 1.2 lx (f1.9, color mode) 0.06 lx (B/W mode)
50 IRE
Gain high: 1.9 lx (F1.9)
5.0 (0.2)
Video output
Video S/N ratio
Lens
1.0 Vp-p/75 ohms, composite, BNC
More than 50 dB (AGC Off)
Built-in motorized zoom pan-focus auto iris lens, f = 2.8–7.3 mm (x2.6), F1.9 –3.0
Focus range: 1 m – ∞
ø99.8 (4.0)
R2.5
8.0 (0.3)
46.0
(1.8)
Depth of field
Ceiling
Pan/tilt range
Wall
Pan: 0–335 degrees, Tilt: 0–90 degrees
Pan: ±55 degrees, Tilt: 0–90 degrees
Preset
Pan/tilt speed
Manual
Max. 120 degrees/sec.
5–100 degrees/sec.
2–ø4.3
Menu
Preset positions
Auto mode
On screen display, password lock possible
16
32.0
(1.3)
Sequential pan / Auto pan
88.0 (3.5)
83.4 (3.3)
Backlight compensation
White balance
Gain control
On (multi-spot metering [High/Normal], center-zone metering) / Off
ATW / AWC / Manual (MWB) / Indoor (3200) / Outdoor (5600) / Fluorescent (FLUO)
High / Normal / Off
Options (sold separately)
Electronic shutter
Gamma
Aperture compensation
Synchronizing system
Camera title
Privacy masking
Alarm input
Alarm output
1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.
0.45 / 1
VA-50H
Heater board
for VDC-DPN9585P
Heater board providing protection from cold for camera unit.
Allows use in –30°C operating environments (24 V AC only).
High plus / High / Normal / Off
Internal synchronization / Line lock
On / Off, up to 16 characters, title position adjustable
On / Off: Max. 8 masked locations
External x 2, NO / NC selectable, Alarm preset function, Alarm zoom function
External x 1, NO / NC selectable
Motion detector
Communications
Audio compression method
Microphone input
Audio output
On / Off: Motion zoom function
Simplified controller (VAC-70: separately ordered) supported
G. 711 (192 Kbps), full duplex
-62 to -32 dB (monaural microphone) 3.5mm mini jack
LINE OUT monaural audio output, maximum -8 dB, 3.5mm mini jack
VCZ-50
VAC-70
Cam era
control unit
Sm oked type
dom e cover
for VCC-P9574N
Weatherproof standard
IP66
—
-10 to +50°C (14 to 122°F)
Pan-Focus Cam era Lineup
1/4" Color CCD DSP High-Resolution
-30 to +50°C (-22 to +122°F)
When heater (VA-50H: option board) is used
with power source connected
Temperature
Operating
-10 to +40°C (14 to 104°F)
environment
VDC-DP7585P
Vandal-Resistant
Day/Night
VCC-P7575PA
Indoor Mini
Dome Camera
Humidity
Power supply
Less than 90% RH (no condensation)
24 V AC ±10%, 50Hz or 12–15 V DC, supplied through PoE (compliant with IEEE 802.3af)
Dome Camera
Power consumption (approx.)
10 W
Max. 15.5 W
When heater (VA-50H: option board) turned on
1520 g
VDC-DP9585P
Vandal-Resistant
Day/Night PTZ
Dome Camera
VCC-P9575P
Indoor Mini PTZ
Dome Camera
10 W
650 g
Weight (approx.)
Netw ork
Image compression
Resolution
VCC-XZ200P
Weatherproof
Day/Night
JPEG
720 x 286, 640 x 480 (disabled during voice communications), 360 x 286, 180 x 143
Zoom Camera
Picture quality
Frame rate
Audio compression method
Input
5 levels
Max. 25 IPS (720 x 286)
G.711 (192 Kbps), full duplex
Microsoft and Windows are either registered trade-
marks or trademarks of Microsoft Corporation in the
United States and/or other countries. Intel and Pentium
are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the U.S. and other
countries. All other trademarks are the property of their
respective owners.
-62 to -32 dB (monaural microphone) 3.5mm mini jack
External
Internal
Microphone
—
Internal or external selected
Audio output
Bandwidth
Alarm buffer
Interface
PoE support
Protocols
Simultaneous access capacity
Security
Bundled software
LINE OUT monaural audio output, maximum -8 dB, 3.5mm mini jack
128, 256, 512 Kbps, 1, 2, 3, 4 Mbps, no limitation
Up to 8 MB; configurable
10BASE-T/100BASE-TX (RJ45 connector)
Compliant with IEEE 802.3af
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
Image: Maximum 16, Voice: Maximum 16 (admin: 1)
BASIC authentication (ID/password), SSL supported (image only)
VA-SW3050LITE
Note:
• Frame rates variable dependant upon network line
conditions and PC performance.
• Because products and software described in this
brochure are subject to continuous improvement;
SANYO reserves the right to modify product specifi-
cations, functions and design without notice.
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
DI Company of SANYO Electric Co., Ltd.
obtained Quality Management System
ISO 9001 and Environmental Management
System ISO 14001 certifications.
051
EC00J0303
Distributed by:
SANYO Electric Co., Ltd.
©2006 SANYO Printed in Japan ’06.9. MA.
SMS132
Download from Www.Somanuals.com. All Manuals Search And Download.
|