OWNER'S
MANUAL
ECD-T1580DV
Vertical Adjustable And Horizontal Rotatable Panel
6.5 Inch Color TFT Monitor
DVD Player with AM/FM TV Tuner Box
Multi-subtitle Languages Function
Multi-audio Languages Function
Multi-angle Function
Parental Control
Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
FEATURES
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30 .
Supplied remote handles multi-function
software (multi-language audio-
track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
Protect the monitor mechanism
The monitor is operated automatically.
Do not draw the monitor out or turn it
upward or downward manually.
Otherwise, the mechanism
construction may be harmed to some
degree.
USE THIS PRODUCT SAFELY
This set has been designed and
manufactured to assure personal safety.
Improper use can result in electric shock
or fire hazard. The safeguards
incorporated in this unit protect you if
you observe the following procedures for
installation, use and servicing. This unit
doesn't contain any parts that can be
repaired by the user.
When you operate the monitor with the
remote handset, do not touch the
monitor by your hands. It may harm
your fingers.
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
CAUTION:
REGION MANAGEMENT
INFORMATION
MOBILE DVD PLAYER ISA CLASS I
LASER PRODUCT. HOWEVERTHIS
MOBILE DVD PLAYER USESA
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPENCOVERS AND - DO NOT
REPAIR YOURSEL.F. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRICSHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision Corporation.
Reverse engineering or disassembly is
prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC NOTES
Disc formats supported by this player
unusable) depending on the way it is
handled and conditions in the usage
environmet.
DVD
12 cm disc
(Single-sided disc only)
Note these scratches are not an
indication of any problem with the player.
Label side up
VIDEO CD
12 cm disc
CD
12 cm disc
Do not touch
the underside
of the disc
MP3
12 cm disc
Discs which cannot be played with this
player
Do not bend
DVD-ROM
DVD-R/DVD-RAM
CDV
CD-G
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Wipe the disc from center
toward the outside edge
Preparing New Discs with Rough Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damage.
Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
Rough spots
on inside edge
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Notes:
DIN FRONT-MOUNT (Method A)
Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below:
Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
53 mm
182 mm
Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
Installing the unit
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
2. Disconnect the wire harness and the
antenna.
3. Lift the top of the outer trim ring then
pull it out to remove it.
4. The two supplied keys release tabs
inside the unit's sleeve so you can
remove it. Insert thekeys as far as they
will go (with the notches facing up) into
the appropriate slots at the middle left
and right sides of the unit. Then slide
the sleeve off the back of the unit.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
Install the unit where it does not get in
the driver's way and cannot injure the
passenger if there is an emergency
stop.
If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.
30
Sleeve
L Key
Outer Trim Ring
Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
R Key
DIN FRONT/REAR-MOUNT
byinserting the sleeve
This unit can be properly installed either
from "Front" (conventional DIN Front-
mount) or "Rear" (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
5. Mount the sleeve by inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a screwdriver. Not all tabs
will be able to make contact, so
For details, refer to the following
illustrated installation methods.
examine which ones will be most
effective. Bending open the appropriate
tabs behind the dashboard to secure
the sleeve in place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Dashboard
Removing the unit
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
Tabs
2. Remove the metal strap attached the
back of the unit (if attached).
3. Lift the top of the outer trim ring then
pull it out to remove it.
Screwdriver
4. Insert both of the supplied keys into
the slots at the middle left and right
sides of the unit, then pull the unit out
of the dashboard.
Sleeve
6. Reconnect the wire harness and the
antenna and be careful not to pinch
any wires or cables.
7. Slide the unit into the sleeve until it
locks into place.
8. To further secure the unit, use the
supplied metal strap to securethe back
of the unit in place. Use the supplied
hardware(HexNut (M5mm)and Spring
Washer)to attach one end of the strap
to the mounting bolt on the back of
the unit. If necessary, bend the metal
strap to fit your vehicle's mounting
area. Then use the supplied hardware
(Tapping Screw (5x25mm) and Plain
Washer) to attach the other end of
metal strap to a solid metal part of the
vehicleunder the dashboard. Thisstrap
also helps ensure proper electrical
grounding of the unit.
Spring Washer
Hex Nut
Metal Strap
Mounting Bolt
Plain Washer
Tapping Screw
9. Reconnect the cable to the vehicle
battery's negative (-) terminal. Then
replace the outer trim ring.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
DIN FRONT-MOUNT (Method B)
3
1
2
4
5
1. Factory radio mounting bracket
2. Car radio mounting bracket
3. Screw
4. After aligning the car radio mounting
bracket with the factory radio mounting
bracket, tighten the screws (5x5mm)
at 2 places on each side.
5. When fixing factory radio mounting
bracket with the screws, use a
standard-tipped screwdriver to bend
open the tabs of the car radio
mounting bracket to make them fit into
the holes in the factory radio mounting
bracket.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PLAYER
FRONT VIEW
Closed Position
6
1
5
2
4
3
Open Position
7
8
9
1 0
11
1. POWER
7. PICT
2. Remote sensor (on the front
panel)
8.
Adjust (-)
9. Adjust (+)
3. OPEN/CLOSE
10. Remote sensor (on the monitor
panel)
4.
(EJECT)
11. 6.5 INCH COLOR
TFT MONITOR
5. Disc Slot
6. Reset Button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
THE PLAYER
BACK VIEW
12
13 14
15
16
17
12. 13 PIN SOCKET
13. RGB SYSTEM
15. AUDIO/ VIDEO INPUT
16. DIGITAL AUDIO
17. DC 12V IN
14. REMOTE SOCKET
10
Download from Www.Somanuals.com. All Manuals Search And Download.
THE RADIO BOX
ONE SIDE
3
4
2
1
OTHER SIDE
5
6
4. AUDIO OUTPUT
1. 20-pin socket
2. TO MAIN UNIT
3. VIDEO OUTPUT
5. ANTENNA SOCKET
6. DIVERSITY ANTENNA
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONNECTION
METHOD A
DVD UNIT
DC 12V IN
AUDIO/VIDEO
REMOTE
DIGITAL
AUDIO
INPUT
(BLACK)
RGB SYSTEM
ONE SIDE
OTHER SIDE
RADIO BOX
RADIO BOX
FUSE
ANTENNA SOCKET
DIVERSITY ANTENNA
FRONT RCA CABLE(BROWN)
RED
Rch
Lch
WHITE
RED
REAR RCA CABLE(GREY)
Rch
WHITE
Lch
(FOR RCA LINE OUT VERSION ONLY)
BLUE
ANTENNA
POWER
YELLOW
CHOKE
BLACK
BOX
MEMORY/BATTERY
GROUND (B-)
ORANGE
PINK
TELPHONE MUTE (OPTIONAL)
BRAKE(OPTIONAL)
GREY
+
WHITE
FRONT Lch
+
-
FRONT Rch
SPEAKER
-
SPEAKER
WHITE/BLACK
GREEN
GREY/BLACK
VIOLET
REAR Lch
SPEAKER
REAR Rch
SPEAKER
+
-
+
-
GREEN/BLACK
VIOLET/BLACK
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONNECTION
METHOD B
DVD UNIT
DC 12V IN
AUDIO/VIDEO
INPUT
DIGITAL
AUDIO
REMOTE
(BLACK)
RGB SYSTEM
ONE SIDE
ANOTHER SIDE
RADIO BOX
RADIO BOX
FUSE
ANTENNA SOCKET
RED
FRONT RCA CABLE(BROWN)
REAR RCA CABLE(GREY)
DIVERSITY ANTENNA
Rch
WHITE
Lch
RED
Rch
WHITE
Lch
(FOR RCA LINE OUT VERSION ONLY)
ORANGE
TELPHONE MUTE (OPTIONAL)
BRAKE(OPTIONAL)
PINK
Part B
Part A
FOR DETAILED CONNCTION,
PLEASE SEE THE FOLLOWING PAGE.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL CONNECTION
METHOD B
ONE SIDE
RADIO BOX
FUSE
RED
FRONT RCA CABLE(BROWN)
REAR RCA CABLE(GREY)
Rch
Lch
WHITE
RED
Rch
Lch
WHITE
(FOR RCA LINE OUT VERSION ONLY)
ORANGE
TELPHONE MUTE (OPTIONAL)
PINK
BRAKE(OPTIONAL)
Part B
Part A
4-SPEAKER SYSTEM
(GREEN/BLACK)
-
-
Rear Left
Speaker
(GREEN)
(WHITE/BLACK)
(WHITE)
+
-
+
-
Front Left
Speaker
+
-
+
-
(GRAY/BLACK)
Front Right
Speaker
(GRAY)
+
-
+
-
(VIOLET/BLACK)
Rear Right
Speaker
(VIOLET)
+
+
Ground Wire (Black)
Power Antenna/Amplifier Turn On (Blue)
+12V Constant Power Supply (Yellow)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
LOCATION AND FUNCTION OF KEYS
4
5
36
35
1
3
2
6
7
8
10
9
11
14
12
13
15
16
17
20
19
18
24
33
23
22
34
28
27
25
29
32
31
21
30
26
15
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1.
POWER
Press POWER to turn the unit ON or OFF.
2. EJECT
in DVD/CD mode, press to eject the disc.
3. OPEN/CLOSE Press to open/close the monitor .
4. SUBTITLE
Changing of the SUBTITLE language on multi-subtitle
language DVD disc.
5. ANGLE
Changing of the view angle on multi-angle DVD disc.
Display statistical disc information during playback in the mode.
Press to change between DVD, RADIO, TV, AV and RGB mode.
Display the SETUP menu in DVD mode.
6. DISPLAY
7. MODE
8. SETUP
9. PROGRAM
Allows the track played in the order you programmed.
10. AUDIO
Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD/CD disc.
11. TITLE (DSP)
12. MENU
Display the TITLE menu that is stored in DVD disc.
In TV mode, press to display the TV channel in the screen
Display the root menu that is stored on the DVD disc.
13.
/
,
/
In case of MENU mode,
/
,
/
buttons to select item left/right, ahead/back.
, buttons served as cursor
14. ENTER
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on screen.
Changing for slow forward/ reverse playback motion on DVD disc.
Press to play the disc.
15.
16.
17.
18.
/
/
Press
to search forward rapidly & to search reverse rapidly.
to skip to the next track & press to skip back one
/
Press
track.
19.
20.
Press it to stop playback.
Press it to pause playback.
Numeric buttons
21. 0 - 9
22. 10+(-/--)
23. SEL
Tens digit select button, cooperatively used with numeric buttons.
In DVD, RADIO, TV, AV mode, press SEL to display the
corresponding menu.
24. PANEL+/-
25. CH
Press to turn the monitor angle upward or downward in small steps.
In radio mode, press
step of channel spacing. Hold longer for fast tuning.
In TV mode, press (CH+) shortly to select channel upward.
shortly to increase frequency by one
26. VOL+
27. GOTO
(AS/PS)
Press VOL+ button to increase the volume level.
Disc search button, cooperatively used with numeric buttons.
In radio mode, press several seconds to enter into automatic
memory storing function; press shortly to scan preset station.
In TV mode, press it for several seconds to start search
channel automatically, press (CH-) to stop it in the course
of searching.
(AUTO)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
28. PBC
29. CH
Changing between PBC ON and PBC OFF on the VCD disc.
In radio mode, press shortly to decrease frequency by one
step of channel spacing. Hold longer for fast tuning.
In TV mode, press (CH-) shortly to select channel downward.
Press VOL- button to decrease the volume level.
Switch the Repeat mode of discs.
A-B repeat allows a passage to be repeated continuously.
Six preset memory buttons.
In radio mode, press it to select desired band.
In radio, DVD, TV or AV mode, press to mute the sound.
Allows the picture to be increased in size.
30. VOL-
31. REPEAT
32. A-B(MO/ST)
33. RADIO PRESET
34. BAND
35. MUTE
36. ZOOM
17
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Point the remote control towards the
remote control signal receiver on the
player front face.
Operation angle: About 30 degree in
each the direction of the front of the
remote sensor.
LOADING/EJECTING A DISC
Loading a Disc
1. Turn the ignition on the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
3
1
2
Ejecting a Disc
Only in DVD mode, press
to eject the disc.
button (3)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Do not rotate the monitor forcibly to
avoid mechanical damage.
BASIC OPERATION
Turning the player on/off
Press the POWER button on the front
panel or (POWER) button on the
remote control to turn the player on or
off.
Open/Close the Monitor and Angle
Adjustment
Press OPEN/CLOSE button on the
front panel or point the remote control
to the remote sensor on the front panel
and press OPEN/CLOSE button on the
remote control, the monitor will draw out
automatically.
Fig.3
Return the monitor to the central
viewing position, then press
OPEN/CLOSE button on the front
panel or press OPEN/CLOSE button
on the remote control, the monitor will
turn downward automatically.
OPEN/CLOSE button
Fig.1
When the monitor draws out to a
certain location, it will turn upward
automatically and stop at vertical
position.
Fig.4
When the monitor turns downward to
a certain angle, it will draw in.
Fig.2
Adjusting the viewing angle.
When the monitor stops moving, you
+
can press PANEL or PANEL- button
on the remote control to turn the
monitor upward or downward at fine
steps to get a desired viewing angle.
And you can rotate the monitor left and
right from the central viewing position
at a certain angle range manually.
Fig.5
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Remote Sensor
wiring is completed.
- All the function buttons do not
operate.
There is a remote sensor on the front
panel. On the monitor, there is another
remote sensor to receive remote control
signal. You can point the remote control
handset to the remote sensor on the front
panel (when the monitor doesn't stretch
out) or the remote sensor on the monitor
panel (when the monitor stretches out)
and press function keys on the remote
control to control the DVD unit.
The unit is also connected to an external
remote receiver (See the electrical
connection diagram above), and the
function is the same with the remote
sensor on the front panel or on the
monitor panel.
- Error symbol on the display.
Picture mode Adjustment
Press PICT button on the monitor panel,
the picture mode will show on the
display, repeatedly press PICT button to
select among BRIGHT, CONTRAST,
COLOR, TINT (For the unit with NTSC
system) and SCREEN.
(For the unit with NTSC system):
PICTURE
BRIGHT
CONTRAST
COLOR
TINT
32
32
32
32
Notes:
The external remote receiver is placed
near the monitor for the best to
reception of the remote signa.l.
If the angle of the monitor from vertical
SCREEN
16:9
exceeds
(Especially the distance
30
exceeds 3m.), controlling the DVD unit
through the remote sensor on the front
panel may not be effective. You are
suggested to use the external re.mote
receiver.
Press +/- buttons on the monitor
panel to adjust the selected item. The
corresponding value will show on the
display.
6.5 Inch TFT Display
When the monitor stretches out, the 6.5
inch color TFT display can show the
current state of the unit.
NOTE (FOR THE UNIT WITH
TEL-MUTE AND BRAKE FUNCTION):
When there is an incoming call, the
unit will be in mute state, and “TEL
MUTE” appears on the screen
display.
If you are driving the car (BRAKE
OFF), the picture will not be shown on
the screen in DVD/TV/AV mode for
safety purpose. Only the audio will be
heard.
Volume Level Adjustment
Press VOL+/- buttons on the remote
control to increase or decrease the
volume level.
Mode Selection
Press MODE button on the remote
control to select among DVD, RADIO TV,
AV and RGB mode.
Reset
Reset button is placed on the front panel
and must be activated with either a
ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Pause (still picture)
DISC (DVD, VCD, CD, MP3)
OPERATION
Pressing on the remote control during
playback will stop play temporary . To
return to normal playback, press on
the remote control .
Switching to DVD mode
Press MODE button on remote control to
select DVD mode.
Mute
Will mute the sound, but the disc
continues playing. When you unmute
the sound (press MUTE again), sound
will resume.
Stopping Play
- Briefly press the (Stop) button to
stop the unit playback, when the
(Play) button is pressed, normal
playback will continue.
Repeat Function
- Press (Stop) button twice to stop
the playback and go back to initial
Track/Chapter.
FOR DVD:
Press the REPEATbutton to select
repeat mode as follow.
CHAPTERREPEATON TITLE REPEATON
REPEATOFF
Rapid Forward/Rapid Reverse
Press
&
during play. Each time the
button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow.
FOR VCD/CD:
Press the REPEAT button to select
repeat mode as follow.
DVD:
REP-ONE
REP-ALL REPEAT OFF
Normal Playback
2X
4X
6X
8X
1. Continuously repeat at the current
chapter/track, when selected REP-
ONE mode.
VCD/CD:
Normal Playback
1X
2X
3X
4X
2. Select REP-ALLmode to continuously
repeat all chapter/track on the current
disc.
MP3:
Normal Playback
2X
4X
3. When the player finishes playback of
the current disc last chapter/track, it
will stop and display the elapsed time.
When REPEAT OFF mode is
selected, REP-ONE & REP-ALL
disappears from screen display.
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
Skipping Track
/
control during playback.
Press to skip to next track, and
back one track.
Press
button on the remote
to
Note: For some VCD2.0 discs (PBC-
buttons may
playback control),
be unavailable.
/
A-B
A-B repeat allows a passage to be
repeated continuously. Press A-B button
at the start of the required passage, then
press A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button is pressed, the screen will display
as follows:
Slow Motion Play
Press
/
during play.
Each time the button is pressed, the
speed of slow forward /reverse changes
according to the disc as follow.
DVD:
Normal Playback
2X
4X
8X
A TO B SETA
A TO B SETB
A TO B CANCELLED
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Disc Search (GOTO)
same as described above. If you want to
complete program setting, press (Stop)
FOR DVD
Press GOTO button twice, the screen will
display the following message:
button first then press
button to play
tracks in programmed order. In stop mode
press PROGRAM button to exit program
mode and "PROGRAM OFF" appears.
If you set WITH MENU in SMART NAV
item in PREFERENCES PAGE, you can
TITLE 01/01 TIME -- : -- : --
00:00:25
use
PROGRAM PXXX mode or track number
/
,
/
buttons to select
and press ENTER button to confirm it.
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
FOR CD/VCD (WITH PBC OFF):
Press GOTO button once, the screen will
display the following message:
Menu Control operation in DVD mode
Press SEL button on remote control to
enter sound menu, then you can press
CH / buttons to select the item
upward or downward. Then press
VOL+/- buttons to adjust the selected
item. The corresponding value will show
on the display.
GOTO -- : --
00:00:25
VOLUME
BASS
TREBLE
BALANCE
FADER
LOUD
40
-2
-2
Use numeric buttons to input the time
directly.
Zoom
L-R
F-R
ON
POP
Allows the picture to be increased in size.
Press ZOOM to toggle among 1.5 scale,
2.0 scale and 3.0 scale.
EQ
During Zoom mode, press / ,
/
buttons to move pictures up, down, left or
right direction.
Program
For CD/VCD (WITH PBC OFF)/DVD
(WITH PBC OFF):
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
In stop mode, press PROGRAM button,
the screen will display "PROGRAM
P00:00" For example: press numeric
button 4 "PROGRAM P01:04" appears,
it means track 4 will be played first, then
press numeric button 6 and "PROGRAM
P02:06" appears. Press the different
numeric button to select the corresponding
track, and then you can program tracks to
your need. If you want to complete
program setting, press button or ENTER
button to play tracks in programmed order.
DVD:
(1) Press DISPLAY for the first time:
TITLE01/03 CHAPTER002/025
00:02:25
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
For MP3:
In stop mode, press PROGRAM button,
the screen will display "PROGRAM
P00:0000" and the program method is the
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
(2) Press DISPLAY for the second time:
TITLE REMAIN
01:46:58
CD:
(1) Press DISPLAY for the first time:
SINGLE ELASPED
00:00:25
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
TOTALTRACK : 14
TRACK : - 01
(2) Press DISPLAY for the second time:
(4) Press DISPLAY for the fourth time:
SINGLE REMAIN
00:03:15
CHAPTER REMAIN
00:01:39
TOTALTRACK : 14
TRACK : - 01
(5) Press DISPLAY for the fifth time:
The message on the screen will becleared.
(3) Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
VCD:
(1) Press DISPLAY for the first time:
TOTAL TRACK : 14
TRACK : - 01
SINGLE ELAPSED
00:00:25
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
(2) Press DISPLAY for the second time:
SINGLE REMAIN
00:03:15
TOTAL TRACK : 14
TRACK : - 01
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
(3) PressDISPLAY for the third time:
MP3 (When set to NO MENU in SMART
NAV item):
TOTAL ELAPSED
00:00:25
(1) Press DISPLAY for the first time:
CHAPTER ELASPED 00:00:25
(4) Press DISPLAY for the fourth time:
TOTALTRACK : 123
TRACK : - 01
TOTAL REMAIN
00:40:35
(2) Press DISPLAY for the second time:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Each time the button is pressed, the
subtitle language changes in sequential
CHAPTER REMAIN 00:04:25
order.
Notes:
TOTALTRACK : 123
TRACK : - 01
-
-
-
The language number is different
according to the disc.
Some discs only contain one subtitle
language.
When no different subtitle language
(3) Press DISPLAY for the third time:
The message on the screen will be cleared.
are recorded,
screen left top corner.
will be displayed at
Multi-audio Language Function
For DVD:
Multi-angle Function (For DVD Only)
Press ANGLE during playback.
Each time the button is pressed, the
angle changes in sequential order
Press AUDIO on the remote control
during playback. Each time the button
is pressed, the audio soundtrack
language changes on sequential order.
Notes:
-
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
The angle number is different
according to the disc.
-
The function only works for discs
having scenes recorded at different
angles.
-
When no different angle are recorded,
soundtrack are recorded, will be
displayed at screen left top corner.
will be displayed at screen left top
corner.
For VCD/CD:
Smart navigation MP3 Disc Play
(For DVD Only)
MP3 disc is playing as the format of
FOLDER.
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
MONO LEFT MONO RIGHT STEREO
For example:
MENU Function (For DVD Only)
Press MENU button while the disc is
playing and the disc root menu will be
displayed. You can navigate with the
remote control navigation keys and
select a feature with the ENTER key.
SMART NAVI
ROOT
CD01
CD02
CD03
CD04
CD05
MP3 001 PLUMT
MP3 002 RZID
MP3 003 ASCIS
MP3 004 DCYI
MP3 005 BFZ
TITLE Menu Function (For DVD Only)
If the DVDhas multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
DISC
PLAY MODE
- Press the cursor button shown in
screen diplay, select preferred title by
the cursor button and confirm by
ENTER key.
/
,
/
In stop mode, Use
on the
remote control to select the item or folder
(such as CD01, CD02...) and press
ENTER button on the remote control to
confirm, then select the desired track
(such as 001 PLUMT, 002 RZID...) on the
current folder to play. Pressing REPEAT
Multi-subtitle Language Function
(For DVD Only)
Press SUBTITLE during playback.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
button repeatedly can select three kinds
of repeat play modes.
REP-ONE:
Play the same song over and over again.
FOLDER REP:
Play all songs in the current directory in
sequence, over and over again.
FOLDER:
Play all songs in the current directory
once.
Selecting station
During radio mode, press CH button
on remote control to increase
frequency or CH button on remote
control to decrease frequency by one
step of channel spacing. Hold the
button longer for fast tuning. The
frequency is updated correspondingly
on display.
Setting memory
Press RADIO PRESET buttons (1~6)
on remote control to preset stations
at radio mode. With this system, a
total of 30 stations can be stored in
the memory of six buttons. Each
band stores up to six preset stations.
The stations might be FM1, FM2,
FM3, AM1 and AM2 band.
When select PLAY MODE, press
/
to change between the following mode:
SINGLE REP-ONE FOLDER FOLDERREP
DISC SCAN DISC DISC REP RANDOM
SHUFFLE ON PROGRAM PXXX
During playback,use
item ahead or back.
: Rapid reverse,
or
to skip an
The operation is as below:
- Store in Memory
Press and hold desired
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
memory location button for
several seconds. The current
listening station will be stored
into the number button.
RADIO OPERATION
Switching to radio mode
Press MODE button on remote
control to select radio mode.
In radio mode, the following
information will appear on the display.
- Retrieve a Preset Station
Press any one of the RADIO
PRESET buttons (1~6) on
remote control to retrieve a
station which had been stored
in the memory in advance the
chosen number is shown on
display.
FM1 98.1 MHz
MONO
VOLUME
BASS
TREBLE
BALANCE
FADER
LOUD
40 M1 87.50
-2 M2 90.10
-2 M3 98.10
L-R M4 106.10
F-R M5 108.00
OFF M6 87.50
POP
Automatic memory storing &
program scanning
- Automatic memory storing
Press GOTO (AS/PS) button
on remote control for several
seconds, the radio searches
from the current frequency and
checks the signal strength until
one cycle search is finished.
And then 6 strongest stations
are stored into the
EQ
Selecting the frequency band
Press BAND on remote control to
select desired band. The reception
band will change in the following
order:
corresponding preset number
button.
- Program scanning
FM1
FM2
FM3
AM1
AM2
Press GOTO (AS/PS) button
on remote control shortly to
scan preset station.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
TV OPERATION
Switching to TV mode
Mono/stereo
Press MODE button on remote
control to select TV mode.
Auto searching TV channels
Press GOTO (AUTO) button for
several seconds on remote control
to start search channel
Press A-B MO/ST button on remote
control to select mono or stereo
mode. You can sometimes improve
reception of distant stations by
selecting mono operation.
Mute
automatically.
In the course of searching, press
CH button to stop searching.
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the previous
volume mode.
When in the default menu, the
“MUTE” will appear on the screen
display.
Selecting channel
-
Press CH button on
remote control to choose
channel upward and press
CH button on remote control
to choose channel downward.
The numeric buttons (0,1~9)
allow you to select the
corresponding channel directly.
Press digital select button
10+(-/--) cooperatively used with
numeric buttons to select
channel desired.
Menu Control operation in radio
mode
When you press MODE to select
radio mode, the menu appears,
Press SEL button on remote control
to select VOLUME, then you can
-
-
press CH
/
buttons to select the
item upward or downward to switch
between VOLUME, BASS, TREBLE,
BALANCE, FADER, LOUD and EQ
mode. Then press VOL+/- buttons
to adjust the selected item. The
corresponding value will show on
the display.
For example, when you want
select 16 channel, press10+(-/--)
to switch between “-“ and “--“,
when the “--“ appears on the
display, you can press “1
“button then press “6” button to
select 16 channel.
Mute
FM1 98.10 MHz
MONO
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the
previous volume mode.
VOLUME
BASS
TREBLE
BALANCE
FADER
LOUD
40 M1 87.50
-2 M2 90.10
-2 M3 98.10
L-R M4 106.10
F-R M5 108.00
ON M6 87.50
POP
Screen display
Press TITLE (DSP) button on
remote control to display the
current status such as TVch. If you
don’t operate over five seconds, the
information on the screen will
disappear.
EQ
When you select EQ item, there are
four audio modes to be selected:
Menu Control operation in TV
mode
FLAT
POP
ROCK
CLASSIC
Press SEL button on remote control
to enter sound menu, then you can
press CH
/
buttons to select the
26
Download from Www.Somanuals.com. All Manuals Search And Download.
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.
Mute
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the
previous volume mode.
VOLUME
BASS
40
-2
TREBLE
BALANCE
FADER
LOUD
-2
L-R
F-R
ON
POP
RGB OPERATION
Switching to RGB mode
EQ
When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then
Press MODE button on remote control
to select RGB mode, the RGB signal
will appear on the screen.
AV OPERATION
Note: When you press MODE button to
select RGB mode and there is no
any RGB signal input, then there is
nothing to display on the screen.
Switching to AV mode
On the back of the unit, there is a
pair of AUDIO/VIDEO INPUT jacks.
When you connect an audio/video
system through these jacks, press
MODE button on the remote control
to select AV mode.
Menu Control operation in AV
mode
Press SEL button on remote control
to enter sound menu, then you can
press CH / buttons to select the
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.
VOLUME
BASS
40
-2
TREBLE
BALANCE
FADER
LOUD
-2
L-R
F-R
ON
POP
EQ
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
TV DISPLAY
PIC MODE
NORMAL / PS
NORMAL / LB
WIDE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1.Press SETUP on the remote control in
the STOP mode. (Press the
MAIN PAGE
button
twice to ensure that the player is in
STOP mode.)
TV Screen
4:3
Wide (16:9)
Video Material
2.The initial SETUP menu is displayed.
Normal
Pan Scan
Letter-box
4:3
3.Select the preferred item by using the
/
16:9
buttons.
4.Press ENTER button.
a. GENERAL SETUP
TV display setup
This setup page includes all the
item of TV display & Audio output
feature. For details please refer to
GENERAL SETUP MENU.
This is to select the appropriate TV
aspect ratio (4:3 or 16:9) according to
the connected TV set.
Normal/PS (For 4:3 TV)
b. SPEAKER SETUP
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
d. PREFERENCES SETUP
This setup page includes all the
configuration of support feature
For details please refer to
PREFERENCES SETUP MENU.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- GENERAL PAGE ---
TV DISPLAY
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
N-FLICKER
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH
MAIN PAGE
MAIN PAGE
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
OSD LANG type setup
Select the preferred OSD (On Screen
Display) language by using the
buttons.
/
Select N-FLICKER format on image or
picture with noise or distortion.
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
ON
CAPTIONS
ON
OFF
SCR SAVER
OFF
MAIN PAGE
MAIN PAGE
CAPTIONS setup
When playing DVD disc, activate the
CAPTIONS feature by selecting ON and
the captions (such as the actor dialogue)
appear on the screen; deactivate this
feature by selecting OFF and the captions
will not appear.
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVDdisc is playing," " (the angle mark)
will appear on the screen; if is set to
"OFF" the mark will not appear.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- GENERAL PAGE ---
TV DISPLAY
AUDIO SETUP
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
ANALOG
PIC MODE
SPDIF/RAW
SPDIF/PCM
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
DYNAMIC
LPCM OUTPUT
ON
OFF
MAIN PAGE
MAIN PAGE
AUDIO OUT
- Select ANALOG mode to activate
analog audio output.
- Select SPDIF/RAW mode to activate
raw digital audio output. And the digital
audio format depends on the disc
record format.
SCR SAVER setup
Select the SCR SAVER ON/OFF.
SPEAKER SETUP
- Select SPDIF/PCM mode to activate
PCM digital audio output.
--- SPEAKER SETUP PAGE ---
DOWNMIX
LT/RT
--- AUDIO SETUP ---
STEREO
AUDIO OUT
MAIN PAGE
OP MODE
LINE OUT
DYNAMIC
RF REMOD
LPCM OUTPUT
MAIN PAGE
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIXto 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
OP MODE
- LINE OUT: Line out mode, with digital
dialog normalization.
- RF REMOD: RF remodulation mode,
with heavy compression and digital
dialog normalization.
Select the STEREO to activate simple
stereo mode.
It is recommended to select LINE OUT
mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
AUDIO OUT
TV TYPE
AUTO
NTSC
PAL
FULL
6/8
OP MODE
AUDIO
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
4/8
LPCM OUTPUT
2/8
OFF
MAIN PAGE
Dynamic Range Control
Select DYNAMIC and adjust the dynamic
range of a Dolby Digital encoded
program. There are 8 steps between full
compression and off compression.
TV type setup
This player can play discs recorded in
either NTSC format.
Select NTSC format, when the unit is
.
connected to NTSC TV
Select AUTOformat, the player TVoutput
format will be according to the DVD disc
format.
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
DYNAMIC
--- PREFERENCES PAGE ---
TV TYPE
LPCM OUTPUT
LPCM 48K
LPCM 96K
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
MAIN PAGE
LPCM OUTPUT
Select the LPCM (Line Pause Code
Modulation) OUTPUT between LPCM
48K and LPCM 96K. The higher the
sampling frequency is, the better the
output audio quality is.
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
It is recommended to select LPCM 96K
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
OFF
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_ PARENTAL
SUBTITLE language setup
Select the preferred SUBTITLElanguage
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and confirm by pressing
ENTER button.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
SUBTITLE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
ITALIAN
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
PASSWORD
DEFAULTS
CHANGE
SMART NAV
MAIN PAGE
PASSWORD
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
Select CHANGE and press ENTER
button. Type the old password (Theinitial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
RESET
DEFAULTS
SMART NAV
MAIN PAGE
NO MENU
WITH MENU
DEFAULTS
Select reset to revert to factory initial
settings.
SMART NAV
If selected WITH MENU mode, when
playing an MP3 disc, the smart navigation
menu will appear on the screen, then the
user can select a track to play according to
the menu hint.
If selected NO MENU mode, when playing
an MP3 disc, there is no menu to display
and it starts to play directly.
The user can adjust this item according
to one's need.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
DEFAULTS TABLE
General Setup
TV Display
PIC Mode
Angle Mark
OSD Language
Captions
Normal/LB
AUTO
ON
English
ON
SCR Saver
Downmix
Audio Out
OP Mode
Dynamic
ON
Speaker Setup
Audio Setup
Stereo
SPDIF/RAW
Line Out
FULL
LPCM Output
TV Type
LPCM 96K
AUTO
Preferences
Audio
English
English
English
NO_Parental
3308
Subtitle
DISC Menu
Parental
Password
Smart NAV
With Menu
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
DISC DOES NOT PLAY
Ensure the disc label is upwards.
Clean the disc.
Check if the disc is defective by trying
another disc.
Under no circumstances should you
try to repair the player yourself,as this
will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
NO SOUND
Check audio connections.
If using a HIFI amplifier, try another
sound source.
Check if the volume is minimum, and
adjust the VOL+ to increase the
volume level.
NO POWER
Check if the on/off button on the front
of the player is set to on.
Check if AC or DC power plug of the
mains unit is properly connected.
Check if there is power at the AC or
DC outlet.
NO RETURN TO START-UP SCREEN
WHEN DISC IS REMOVED
Press POWER to turn off the unit, then
press it again to turn on the unit.
Press reset button on the front of the
DVD unit.
NO PICTURE
Check if the mode it set to proper
state, such as DVD mode, RADIO,
TV, AV and RGB mode.
THE PLAYER DOES NOT RESPOND
TO THE REMOTE CONTROL
Aim the remote control directly at the
sensor on the front of the player.
Avoid all obstacles which may interfere
with the signal path.
Check the video connection.
DISTORTED PICTURE
Check the disc for fingerprints and
clean with soft cloth, wiping from
centre to edge.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Inspect or replace the remote control
batteries.
DISTORTED OR B/W PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
THE PICTURE IS OVER DARK, OVER
BRIGHT OR HAS NO COLOR
Press PICT button on the monitor
panel, then press + button - button
to increase or decrease the level of
the corresponding item (BRIGHT,
CONTRAST, COLOR orTINT) to
proper value, then you can get an
optimum picture effect.
NO AUDIO AT DIGITAL OUTPUT
Check the digital connections.
Check the Digital Audio menu to make
sure that the digital output is correctly
set.
Check if the audio format of the
selected audio language matches your
receiver's capabilities.
COMPLETELY DISTORTED PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
NO COLOR IN PICTURE
The disc format is not according to the
TV-set used (PAL/NTSC).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
CAN’T RECEIVE TV SIGNAL OR THE
PICTURE QUALITY IS POOR IN TV
MODE
Please confirm if the antenna is
connected to the antenna socket of
the RADIO BOX that connected to
the DVD unit.
Perhaps the signal of your position
is too weak, and it can’t receive any
TV signal at all.
BUTTONS DO NOT WORK
Turn the player off and on with the
power on/off button on the front of the
player.
Press Reset button on the front of the
DVD unit.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
Power Supply Requirements
Maximum Output Power
Current Drain
: DC 12 Volts, Negative Ground
: 4x40 watts
: 15 Ampere (max.)
TV
TV Sensitivity
: 45dB V@CH25 in average
RADIO
FM
87.5 to 107.9 Mhz
Frequency Coverage
Sensitivity (S/N=30dB)
Image Rejection
Stereo Separation
RD PSG
4
V
45 dB
25 dB
38 dB
AW
Frequency Coverage
Sensitivity (S/N=20dB)
Image Rejection
520 to 1710 kHz
36 dBu
45 dB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
DVD
Supply voltage
Current consumption
Signal system
: 12V DC (11V-15V),test voltage 14.4V, negative ground
: Less than 2A
: Compositive video 1.0Vp-p 75
Discs played
: (1) DVD-VIDEO disc
5" (12 cm) single-sided, single-layer
5" (12 cm) single-sided, double-layer
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)
(3) 5" (12 cm) Video CD
Audio output level
Monitor Screen Size
Resolution
: 10k (2 ch 2.0 Vrms)
: 6.5"TFT
: 1200x234 dots
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO MOBILE AUDIO
MODEL ECD-T1580DV LIMITED WARRANTY
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized
Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty.
The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free
number listed below.
For product operation, authorized service center referral, service assistance or problem resolution, call
FACTORY SERVICE 1-800-421-5013
Weekdays8:00AM-5:00PMPacificTime
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASEDAND USED IN THE UNITED
STATES OF AMERICA.
THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOTAPPLY TO
PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIALPURPOSE. THE
ORIGINAL DATED BILLOF SALE OR SALES SLIP MUST BE SUBMITTED TO THEAUTHORIZED
SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC)
warrants this SANYO product against defects in materials and workmanship for the periods specified
below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this
warranty with new or reconditioned products or parts. The warranty period commences on the date the
product was first purchased at retail.
LABOR: 1 YEAR
PARTS: 1 YEAR
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the
appropriate model’s instruction manual, or (B) the repair of any product whose serial number has been
altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, knobs, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or
reinstallation of the product after repair.
This warranty does not apply to the elimination of car static or motor noise, correction of antenna problems,
or damage to compact discs, speakers, accessories or vehicle electrical systems. This warranty does not
apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not
limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts,
improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification
or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts
of God, or normal wear and tear. The foregoing is in lieu of all other express warranties and SFC does not
assume or authorize any party to assume for it any other obligation or liability.
THE DURATION OF ANYWARRANTIES WHICH MAY BE IMPLIED BYLAW (INCLUDING THE
WARRANTIES OF MERCHANTABILITYAND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY
IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTALOR CONSEQUENTIAL DAMAGES
ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE
PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTYDUE TO CAUSES BEYOND ITS
CONTROL. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS AND/OR DO NOT ALLOWTHE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE.
For your protection in the event of theft or loss of this product, please fill in the information below for your
own personal records.
Model No.
Serial No.
(Located on back or bottom side of unit)
Date of Purchase
Where Purchased
Purchase Price
39
Download from Www.Somanuals.com. All Manuals Search And Download.
21605 Plummer Street
Chatsworth, CA91311
ECD-T1580DV. Issue Numbe1r.
88-V1953-01
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|