| 	
		 OWNER'S   
					MANUAL   
					ECD-T1535   
					PLL Synthesized Stereo Radio with   
					Digital Compact Disc Player   
					• 1 pair of RCA output   
					• CD-R/CD-RW Compatibility   
					• 4 preset Equalization   
					• Auxiliary Input   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				1. Dashboard   
					2. Nut (5mm)   
					1 
					6 
					3. Spring washer   
					4. Screw (5 x 14mm)   
					5. Screw   
					4 
					5 
					2 
					3 
					6. Strap   
					Be sure to use the strap to secure the   
					back of the unit in place. The strap can   
					be bent by hand to the desired angle.   
					(Fig. 2)   
					Removing the unit   
					1. Frame   
					1 
					2. Insert fingers into the groove in the front   
					of frame and pull out to remove the   
					frame. (When reattaching the frame,   
					point the side with a groove downwards   
					and attach it.)   
					2 
					3 
					3. Lever   
					Insert the levers supplied with the unit   
					into the grooves at both sides of the unit   
					as shown in figure until they click.   
					Pulling the levers makes it possible to   
					remove the unit from the dashboard.   
					DIN REAR-MOUNT (Method B)   
					Installation using the screw holes on the sides of the unit.   
					Fastening the unit to the factory radio   
					1 
					mounting bracket.   
					1. Select a position where the screw holes   
					of the bracket and the screw holes of   
					the main unit become aligned (are fitted),   
					and tighten the screws at 2 places on   
					each side.   
					2 
					4 
					Use either truss screws (5 x 5mm) or   
					flush surface screws (4 x 5mm),   
					depending on the shape of the screw   
					holes in the bracket.   
					5 
					3 
					2. Screw   
					2 
					3. Factory radio mounting bracket   
					4. Dashboard or Console   
					5. Hook (Remove this part)   
					5 
					Note: The mounting box, outer trim ring,   
					and half-sleeve are not used for method B   
					installation.   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				HOW TO REMOVE AND INSTALL THE FRONT PANEL   
					(OPTIONAL)   
					1. Press the release button and pull-off the front panel.   
					Store front panel in the case.   
					2. To install the front panel, insert the panel into the housing and make sure the panel   
					is properly installed, otherwise, abnormalities may occur on the display or some   
					keys may not function properly.   
					REMOVING THE FRONT PANEL   
					Front Panel   
					Release Button   
					INSTALLING THE FRONT PANEL   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				WIRING CONNECTION   
					MAIN UNIT   
					ANTENNA CONNECTOR   
					IGNITION RED   
					SWITCH (B+)   
					YELLOW   
					MEMORY   
					BACK-UP   
					(GREY)   
					Rch RED   
					RCA CABLE   
					BLACK   
					GROUND (B–)   
					Lch WHITE   
					BLUE   
					POWER   
					ANTENNA   
					GREY   
					WHITE   
					FRONT Lch   
					SPEAKER   
					FRONT Rch   
					SPEAKER   
					GREY/BLACK   
					WHITE/BLACK   
					GREEN   
					VIOLET   
					REAR Lch   
					SPEAKER   
					REAR Rch   
					SPEAKER   
					GREEN/BLACK   
					VIOLET/BLACK   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				OPERATION   
					11   
					7 
					1 2   
					3 
					5 
					8 
					18 19 13   
					4 
					9 
					12   
					10   
					24   
					20   
					21   
					22 14 23   
					6 16 15 17   
					26 25   
					GENERAL OPERATION   
					• ON/OFF   
					Switch on the unit by pressing any button [except button (7) and eject button   
					(4)]. When system is on, press PWR button (9) to turn off the unit.   
					• FACEPLATE RELEASE   
					Press button (7) to detach the removable faceplate.   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				The adjustment mode will change in the following order:   
					Volume   
					Bass   
					Treble   
					Balance   
					Fader   
					By pressing VOL button + (11) or VOL button – (12), it is possible to adjust the   
					desired sound level.   
					• LOUDNESS   
					Press BND/LOU button (13) for several seconds to reinforce the bass output and   
					display will show “LOUD”. Press it for several seconds again to release this function.   
					• SET THE CLOCK   
					Press the DSP button (15), the clock is shown on the LCD display. Then hold down   
					the button until the clock flashes. Then press the MANU/SKIP   
					button (17) to   
					change hours or MANU/SKIP button   
					(16) to change minutes.   
					• SELECT MODE   
					Press MOD button (6) shortly to choose desired listening mode.   
					[e.g. radio mode to CD mode to AUX mode]   
					• MUTE   
					Press MUT button (3) to mute the sound instantly. If any button is pressed in the   
					mute state, the mute mode is released.   
					• LIQUID CRYSTAL DISPLAY   
					Exhibit current frequency and activated functions on the display (8).   
					• EQUALIZATION   
					Press EQ button (19) to turn on equalization function and to select desired audio   
					mode. There are five kinds of mode as below:   
					FLAT   
					CLASSICS   
					POP M   
					ROCK M   
					DSP OFF   
					• AUXILIARY INPUT   
					The unit can be connected to a portable audio player through the AUX IN jack (24).   
					To hear the input signal, press MOD (6) button several times until the display shows   
					“AUX”.   
					• FLASHING LED   
					If the front panel is not installed in the main unit, the LED (25) will be flashing.   
					• RESET   
					RESET button (26) can be activated with either a ball point pen or thin metal   
					object. RESET button (26) is to be activated for the following reasons:   
					- Initial installation of the unit when all wiring is completed.   
					- All the function buttons do not operate.   
					- Error symbol on the display.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				RADIO OPERATION   
					• BAND SELECTION   
					At tuner mode, press BND/LOU button (13) to select the desired band.   
					The reception band will change in the following order:   
					FM1   
					FM2   
					FM3   
					AM   
					• STATION SELECTION   
					Press MANU/SKIP   
					button (16) or MANU/SKIP   
					button (17) to activate   
					automatic seek function. To select manual tuning mode, press for several seconds   
					until “MANUAL” appears on the display. If both buttons are not pressed for several   
					seconds, the tuner will return to seek tuning mode and “AUTO” will appear on the   
					display.   
					• LOCAL/DISTANCE   
					Press LOC button (2) to select between local and distant stations.   
					Local setting for reception of strong station, and a distant setting for reception of   
					weaker stations. This function is in effect during AUTO SEEK operation.   
					• AUTOMATIC MEMORY STORING & PROGRAM SCANNING   
					- Automatic Memory Storing   
					Press ATP button (18) for several seconds, the radio will search from the current   
					station and check the signal strength until one cycle search is finished. The 6   
					strongest stations detected will be stored into the corresponding preset button.   
					- Program Scanning   
					Press ATP button (18) shortly to scan preset station.   
					• STATION STORING   
					Press any one of the preset buttons (14) (M1 to M6) to select a station which had   
					been stored in the memory. Press this button for several seconds to store the   
					current station into that preset button.   
					• SEEK FUNCTION   
					Press SEEK button (1) to scan and hear all tunable stations for a few seconds.   
					Press SEEK again to stop at current station.   
					8 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				CD OPERATION   
					• SELECT TRACKS   
					Press MANU/SKIP   
					button (16) or MANU/SKIP   
					button (17) to move to the   
					previous track or the following track. Track number shows on display.   
					Hold MANU/SKIP   
					button (16) or MANU/SKIP   
					button (17) to fast reverse or   
					fast forward. CD play starts from when you release the button.   
					• PAUSE PLAYING   
					Press PAU button (20) to pause CD player. Press it again to resume play.   
					• REPEAT THE SAME TRACK   
					Press RPT button (22) to continuously repeat the same track. Press again to stop   
					repeat.   
					• PREVIEW ALL TRACKS   
					Press SCN button (21) to play first several seconds of each track on the current   
					disc. Press again to stop intro and listen to track.   
					• PLAY ALL TRACKS IN RANDOM   
					Press SHF button (23) to play all tracks on CD in random order. Press again to   
					cancel the function.   
					• EJECT   
					Press (eject) button (4) to stop CD playing and eject the disc from the disc slot (5).   
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Note:   
					A. Notes on discs:   
					1. Attempting to use non-standard shape discs (e.g. square, start, heart) may   
					damage the unit. Be sure to use round shape CD discs only for this unit.   
					2. Do not stick paper or tape etc., onto the label side or the recording side of   
					any discs, as it may cause a malfunction.   
					3. Dirt, dust, scratches and warping discs will cause misoperation.   
					B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs):   
					1. Be sure to use discs with following marks only for the unit to play:   
					Recordable   
					Rewritable   
					2. The unit can only play a CD-R and CD-RW that is finalized. (Please refer to the   
					manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more   
					information on finalization process).   
					3. Depending on the recording status, conditions of the disc and the equipment   
					used for the recording, some CD-Rs/CD-RWs may not play on this unit. (See *1)   
					*1: To have more reliable play back, please see following recommendations:   
					- Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.   
					- Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x.   
					- Do not play a CD-RW which has been written for more than 5 times.   
					10   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				SPECIFICATION   
					GENERAL   
					Power Supply Requirements   
					Chassis Dimensions   
					Tone Controls   
					: DC 12 Volts, Negative Ground   
					: 178 (W) x 165 (D) x 50 (H)   
					- Bass (at 100 Hz)   
					- Treble (at 10 KHz)   
					Maximum Output Power   
					Current Drain   
					: + 10 dB / – 10 dB   
					: + 10 dB / – 10 dB   
					: 40W x 4 (ch)   
					: 15 Ampere (max.)   
					CD PLAYER   
					Signal to Noise Ratio   
					Channel Separation   
					Frequency Response   
					: More than 55 dB   
					: More than 50 dB   
					: 40 Hz - 18 KHz   
					RADIO   
					FM   
					Frequency Coverage   
					IF   
					Sensitivity (S/N = 30 dB)   
					Stereo Separation   
					: 87.5 to 107.9 MHz   
					: 10.7 MHz   
					: 4 µV   
					: > 25 dB   
					AM   
					Frequency Coverage   
					IF   
					Sensitivity (S/N = 20 dB)   
					: 530 to 1710 KHz   
					: 450 KHz   
					: 36 dBu   
					11   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				TROUBLE SHOOTING   
					Before going through the check list, check wiring connection. If any of the problems   
					persist after check list has been made, consult your nearest service dealer.   
					Symptom   
					No power.   
					Cause   
					Solution   
					The car ignition switch is   
					not on.   
					If the power supply is properly   
					connected to the car accessory   
					circuits, but the engine is not   
					running, switch the ignition key   
					to “ACC”.   
					The fuse is blown.   
					Replace the fuse.   
					Disc cannot be   
					loaded or ejected. the player.   
					Presence of CD disc inside Remove the disc in the player,   
					then put a new one.   
					Disc is upside-down.   
					Insert the compact disc with   
					the label facing upward.   
					Compact disc is extremely Clean the disc or try to play a   
					dirty or defective disc. new one.   
					Temperature inside the car Cool off or until the ambient   
					is too high.   
					temperature returns to normal.   
					Condensation.   
					Leave the player off for an hour   
					or so, then try again.   
					No sound.   
					Volume is in minimum.   
					Adjust volume to a desired level.   
					Check wiring connection.   
					Wiring is not properly   
					connected.   
					Sound skips.   
					The installation angle is   
					more than 30 degrees.   
					Adjust the installation angle less   
					than 30 degrees.   
					The disc is extremely dirty   
					or defective disc.   
					Clean the compact disc, or try   
					to play a new one.   
					The operation keys The built-in microcomputer Press the RESET button. Make   
					do not work.   
					is not operating properly   
					due to noise.   
					Sure the Front panel is properly   
					fixed into its place.   
					The radio does not The antenna cable is not   
					Insert the antenna cable firmly.   
					work. The radio   
					station automatic   
					selection does not The signals are too weak.   
					work.   
					connected.   
					Select a station manually.   
					12   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				SANYO MOBILE AUDIO   
					MODEL ECD-T1535 LIMITED WARRANTY   
					OBLIGATIONS   
					In order to obtain warranty service, the product must be delivered to and picked up from an Authorized   
					Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this   
					warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling   
					the toll-free number listed below.   
					For product operation, authorized service center referral, service assistance or problem resolution, call   
					CUSTOMER INFORMATION 1-800-421-6382   
					Weekdays 8:00 AM - 5:00 PM Pacific Time   
					THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE   
					UNITED STATES OF AMERICA.   
					THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOT APPLY TO   
					PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE   
					ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED   
					SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.   
					Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC)   
					warrants this SANYO product against defects in materials and workmanship for the periods specified   
					below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform   
					to this warranty with new or reconditioned products or parts. The warranty period commences on the   
					date the product was first purchased at retail.   
					LABOR   
					1 YEAR   
					PARTS   
					1 YEAR   
					EXCLUSIONS   
					This warranty does not cover (A) the adjustment of customer-operated controls as explained in the   
					appropriate model’s instruction manual, or (B) the repair of any product whose serial number has been   
					altered, defaced or removed.   
					This warranty does not apply to the cabinet or cosmetic parts, knobs or routine maintenance.   
					This warranty does not apply to the elimination of car static or motor noise, correction of antenna   
					problems, or damage to compact discs, speakers, accessories or vehicle electrical systems.   
					This warranty does not apply to repairs or replacements necessitated by any cause beyond the control   
					of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from   
					unauthorized service or parts, improper maintenance, operation contrary to furnished instructions,   
					shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident,   
					incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.   
					The foregoing is in lieu of all other express warranties and SFC does not assume or authorize any party   
					to assume for it any other obligation or liability.   
					THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE   
					WARRANTIES OF MERCHANTABILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY   
					IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES   
					ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE   
					PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS   
					CONTROL.   
					SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS   
					AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO   
					THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.   
					THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH   
					VARY FROM STATE TO STATE.   
					For your protection in the event of theft or loss of this product, please fill in the information below for   
					your own personal records.   
					Model No.   
					Serial No.   
					Located on back or bottom side of unit)   
					Date of Purchase   
					Where Purchased   
					Purchase Price   
					13   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Download from Www.Somanuals.com. All Manuals Search And Download.   
				Download from Www.Somanuals.com. All Manuals Search And Download.   
				21605 Plummer Street   
					Chatsworth, CA91311   
					ECD-T1535. Issue Number 1.   
					88-C1007-09   
					Printed in Hong Kong   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |