For customer service issues, please call 1-866-848-9912
Parts and usage
How to charge
With this charger, you can
Call GE SANYO at (866) 848-9912 • SANYO Energy (U.S.A.) Corp.,
c/o XWG, 1840 County Line Road Huntingdon Valley, PA 19006
charge up to 4 AA or 4AAA
eneloop Ni-MH batteries.
1) This charger is designed to charge 2 or 4 pcs of AA or AAA
Ni-MH rechargeable batteries. AA and AAA batteries can be
charged at the same time.
Charger Model #NC-MQN06
2) If you want to charge 4 pcs of AA or AAA, put batteries into the
charger compartments, taking care to observe polarity (+/-) as
indicated inside the charger.
Notes on Safety (Please read for proper use.)
Severity of symbol
Regarding eneloop Ni-MH batteries
AAA (-) contact surface
AA (-) contact surface
Danger - Very close to causing death or heavy damage
to human body.
3) If only charging 2 batteries at a time, place the batteries in the
left or right side compartments of the charger.
Please follow the instructions below to avoid damage or injury.
Warning - May cause death or heavy damage to
human body.
Charge indicator light
• Flashes when charging.
• Turns on when charging is
complete.
Danger
Caution - May cause heavy damage to human body
or property damage.
• Do not dispose of in fire. Do not heat, deform, solder, dissamble or
modify.
• Do not insert batteries with the (+) and (-) ends reversed.
Example of the symbols
How to insert and remove battery
• If leaked liquid gets in the eyes, wash them with clean water and
consult a doctor immediately.
This symbol is to inform that the action written inside of the
symbol is prohibited. (Left is to prohibit you from taking apart)
How to insert
•
Batteries should not be used in underwater lighting or in sealed
• Match the + and – terminal of the
battery with the charger’s + and
– contact surface.
electronic devices.
Safety issues of charger
Warning
Danger
• For AA battery, insert from the
+ terminal and push on the
– terminal.
• For AAA battery, insert from
– terminal as in the picture, then
•
Do not connect the (+) and (-) ends with metal objects. When
carrying or storing batteries, avoid direct contact with metal objects.
• Children should be supervised while handling the batteries.
• Do not peel off or damage the outer tube.
Use under the specified voltage
Please use under AC100V to 240V. Otherwise, may
cause high heat, fire breakout, electric shock, or harm to
human body.
How to insert a AA battery
4) Swing plug out and plug into AC100-240V outlet.
place + terminal into + contact surface.
• If leaked liquid gets on the skin or clothing, wash off with clean water
immediately.
5) Confirm that the indication lights begin to flash. Do not plug in
upside down. If plugged in upside down, it will finish charging
before it is fully charged.
Warning
How to remove
• For AA battery, take out from
– terminal.
• For AAA battery, if pushed on
the + side, - side will pop out
for easy removal.
• Do not connect 10 batteries or more in series.
Do not allow metal objects come into contact with charger.
May cause electric shock, excessive heat, or fire.
Caution
6) When charging is complete, the indicator lights will turn on
constantly. Refer to charging chart for typical charge time.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance. Do not charge
non-rechargeable batteries.
Operating temperature range for Ni-MH battery eneloop
How to insert a AAA battery
• Discharge
• Recharge
• Store
23°F to 122°F
41°F to 95°F
- 4°F to 86°F
7) After charging is done, unplug the charger from the outlet and
swing plug back into place.
Spec
• Outside of the indicated range, battery’s performance and
life-cycle may decrease.
Input
Size
AC100-240V ~ 50/60Hz 8W
118 x 72 x 32.5 mm
~ 98g
Weight
Do not use these batteries together with dry cells, other types of
batteries, new or old batteries together, or batteries with different
charge levels.
AA - 2/4 x 1.2V — 300mA
AAA - 2/4 x 1.2V — 150mA
Output
Temp. range
41°F – 95°F
Caution
Charge time
1 – 4 battery
Suitable Battery
May deform charger causing high heat, leakage,
or explosion.
Correctly use “eneloop”
Ni-MH battery
Ni-MH
battery
eneloop
AA HR-3UTG ( Max 3000mAh.
Approx. 10 hours
Min. 1900mAh*)
Do not place heavy objects on top of the charger. Avoid
unstable locations like areas with strong magnetic fields or
dust. May cause excessive heat or fire.
AAA HR-4UTG (Max 1000mAh.
Min. 750mAh*)
Approx. 7 hours
About Charging
Depending upon storage condition, typically eneloop does not need to
Charge time is the time it takes to charge a fully discharged battery.
The charge time will depend on the remaining charge in the battery
and the ambient temperature.
Charger should be used between 41°F to 95°F. If ambient
temperature is higher, charger may cause the battery to leak
or rupture.
be recharged for the first time if used within
2
years from the
manufactured date. However, there may be a time when some digital
cameras may display the low battery indicator. In these cases, please
recharge.
How to assemble C or D battery
• Match the + and – terminal of a AA eneloop battery with the
spacer’s + and – terminals.
• Insert the + terminal of the AA eneloop battery into the – end of
the spacer.
• Push the AA battery until it “snaps” into place.
• To remove, push on the + terminal of the AA eneloop battery
until it releases.
Indication light
Charging Safety
Appearance
Status
Handling
Please recycle used rechargeable batteries.
Do not charge near hot temperatures like an electric blanket,
stove, near direct sunlight, inside of a car, or under hot sun, etc. In
addition, please do not cover the charger with a blanket. In such
cases, battery would not be fully charged because the temperature
inside of the charger will become hot, and the safety protective
function will be activated and stop charging.
Charging
Indicator lights flashing
Normal
properly
All rechargeable batteries contain precious
resources that can be reused. To learn more
Finish
Batteries are ready for use
Indicator lights are on
Indicator lights are off
about recycling or to find
a
drop-off location,
charging
a) No battery put inside charger
b) Battery connected incorrectly
c) The charger has internal failure
d) Power off
Default
mode
* All statements concerning capacity (mAh) or the life of the battery (cycle
life) are based on IEC61951-2.
* Statements concerning long term storage is based on simulations at room
temperature.
Please charge at temperature between 41°F to 95°F.
AA battery
C or D spacer
Download from Www.Somanuals.com. All Manuals Search And Download.
|