OWNER’S MANUAL
GUIDE D’UTILISATION
50” CLASS LED-LCD HDTV
LED-LCD HDTV CATÉGORIE 50 PO
SLED5000
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
grounding electrodes, and requirements for the grounding electrode.
Download from Www.Somanuals.com. All Manuals Search And Download.
3 EN
IMPORTANT SAFETY INSTRUCTIONS
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
22) When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal
injury. Read the owner's manual of the other equipment carefully and follow the instructions when
making any connections.
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use
headphones continuously with high volume sound, it may cause hearing damage.
24) Do not allow the product to output distorted sound for an extended period of time. It may cause
speaker overheating and fire.
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as
practical.
26) The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 4
IMPORTANT SAFETY INSTRUCTIONS
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In
such cases, change the location of the unit.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless
headphones.
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches
(10 cm) free space around the entire unit.
4inches
4inches
Notes when mounting the TV on a wall
•
If the unit is to be mounted on the wall, contact the retailer where you
purchased the TV for advice, and have the equipment professionally
installed. Incomplete or improper installation may cause injury to you,
and/or damage to the TV.
•
Bracket holes:To attach a wall mounting bracket (not supplied) attach
where indicated in the drawing right.
•
•
This manufacturer recommends professional installation.
Utilize an appropriate bracket and fasteners, sufficient to
accommodate the size and weight of the unit.
Bracket holes
•
Assure the wall to which the unit is to be mounted will safely support
the size and weight of the unit, using the bracket and fasteners you
have selected.
•
•
Keep cords and cables connected to this flat panel display out of
reach of children.
To hang the television on a wall, remove these screws and then
remove a stand. Before performing work spread cushioning over the
base area to lay the TV on.
Screws
•
Before wall-mounting, please check carefully the location of the TV’s
mounting-holes.
Download from Www.Somanuals.com. All Manuals Search And Download.
5 EN
How to attach the stand
NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any
damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fit in only one direction.
Hold the unit and attach the stand as shown in figure 1.
Wait
Figure 2
Figure 1
Finally secure the bottom-plate with 5 screws (supplied) (4x12mm(5/32 x 15/32 inches)) as indicated by the
arrows in figure 2.
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support
your unit correctly, and could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To
remove the stand, perform these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back
(see page 5).
Warning
To prevent injury, which could be expected due to an
eventual fall, the TV must be fixed to the ground
according to instruction (see right image).
Fix to the appropriate ground with the screw (not
supplied).
NOTE:
• There is no liability for any damage to the ground.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 6
Features
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
• Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to
240 minutes to turn off automatically.
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is
encoded with this information. V-Chip will allow you to set a restriction level.
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby
Digital sound can produce the effect of being in a movie theater or a concert hall.
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can
be connected to this unit.
• On-Screen 3 Languages Display - You can select one of 3 languages, English, French or Spanish for on-
screen programming.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz
polarized AC outlet.
AC Outlet
Wider Hole and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
NOTE:
• Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).
Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade.
It is the user’s responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from
the AC outlet and plug it back in. The unit should return to normal operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 EN
Contents
Before using your unit
IMPORTANT SAFETY INSTRUCTIONS...........3
SAFETY PRECAUTIONS .................................5
How to attach the stand ....................................6
How to remove the stand ..................................6
Features............................................................7
Power source....................................................7
Contents ...........................................................8
Parts and functions ...........................................9
Remote control ...............................................10
Antenna connections ......................................11
Cable TV connections.....................................11
Connections to other equipment.....................12
TV operation
Starting setup .................................................15
TV operation ...................................................15
Quick guide for menu operation......................16
Convenience functions ...................................17
Channel setup.................................................20
Labeling channels...........................................21
Setting the V-Chip ...........................................21
Closed Caption...............................................23
CC options......................................................23
Setting the picture size....................................24
Media Playback ..............................................25
Additional information
Reception disturbances ..................................27
Troubleshooting ..............................................28
Specifications ................................................29
limited WARRANTY ........................................30
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 8
Parts and functions
Front
Right Side
INPUT/ENTER button
CH (CHANNEL)
/
/▲/▼ buttons
VOL (VOLUME)
+/–/▶/◀/MENU buttons
POWER button
Remote sensor
Power Indicator
Red: Standby
Green: On
To display the menu screen.
Press MENU button to display the menu screen.
CH (CHANNEL)
/
buttons, VOL (VOLUME)
+/– buttons and INPUT/ENTER button can be used
to select the desired setting during the menu screen
operations.
Right side
PC MONITOR IN jack
HDMI/DVI3 IN jack
Rear
USB INPUT
HDMI/DVI1/2 IN jacks
AUDIO IN (L/R) jacks
COMPONENT IN
(Y(VIDEO)/Pb/Pr) jacks
DIGITAL AUDIO
COAXIAL OUT jack
AUDIO OUT jacks
ANT. (RF) IN jack
Download from Www.Somanuals.com. All Manuals Search And Download.
9 EN
Remote control
6.CURSOR ▲/▼/◀/▶ Buttons Use to operate the
-
12
13
menu functions of the TV.
1
2
7.ENTER Button - Use to enter or select
information for On-Screen operations.
8.MUTE Button - To turn off the sound, press this
3
button once. The TV will be silenced and the
symbol
will appear on the screen. The muting
4
5
14
15
feature can be released by pressing the MUTE
button again or one of the VOL (VOLUME) + / –
buttons.
9.VOL (VOLUME) + / – Buttons - Press the +
button to increase, or the – button to decrease the
sound level.
6
7
16
8
10.INPUT SELECT Button - Use to change the
external input.
11.CCD Button - Use to select Closed Caption to
17
18
9
“CC Off”, “CC On” or “CC on Mute”.
10
11
12.SLEEP Button - To set the TV to turn off after a
preset amount of time, use the SLEEP button on
the remote control.
13.PICTURE SIZE Button - Use to change the
picture size.
1. (POWER) Button - Use to turn the power on/off
14.RECALL Button - This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
to the TV.
2.DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
15.EXIT Button - Press to remove setup menu.
16.AUDIO Button - Change soundtrack language.
3.Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel of the TV.
17.CH (CHANNEL)
/
Buttons - To change the
channels of the TV.
4.– Button -This button is used when selecting
digital channels.
18.USB Media control buttons - See page 25.
5.MENU Button - Use to display the On-Screen
menu function.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
Use two “AAA” size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
These precautions should be followed when using
batteries in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when
installing the batteries as indicated in the battery
compartment. Reversed batteries may cause
damage to the device.
• Do not mix different types of batteries together
(e.g. Alkaline, Carbon-zinc or Rechargeable) or old
batteries with fresh ones.
• If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 10
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see “Cable TV connections”.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Connect the 75 ohm cable from the combination
Antenna
VHF/UHF antenna to the Antenna Jack.
Jack
75 ohm
Coaxial
Cable
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is
generally provided by the Cable TV company.
For subscribers to basic Cable TV service
For basic Cable TV service not requiring a Converter/
75 ohm
Descrambler box, connect the 75 ohm Coaxial Cable directly
Coaxial
Cable
Antenna
Jack
to the Antenna Jack on the back of the TV.
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel
3 or 4) and use the Converter/Descrambler box to select channels.
Incoming
75 ohm
Cable TV
Cable
Antenna
Jack
75 ohm Cable to TV
Converter/
Descrambler
For subscribers to unscrambled Cable TV service with scrambled premium channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the
Converter/Descrambler box to tune scrambled channels.
Incoming
Converter/
75 ohm
Cable TV
Cable
Antenna
Jack
Descrambler
75 ohm Cable to TV
A
A/B Switch
Splitter
B
Download from Www.Somanuals.com. All Manuals Search And Download.
11 EN
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner’s Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the TV to a VCR
Right of the unit
VCR
To VIDEO/AUDIO IN
To Video/Audio OUT
Video/Audio cord (not supplied)
To connect the TV to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the component video cables (not supplied).
Right of the unit
To COMPONENT IN
To AUDIO IN
To Audio OUT
(Y(VIDEO)/Pb/Pr)
Audio cord
Y
DVD
(not supplied)
Pb
Pr
Y
Pb
Pr
Component video cord
(not supplied)
To Component OUT
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p/1080p progressive signals.
To connect the TV to a camcorder, or a game console
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for
additional information.
Right of the unit
To VIDEO/AUDIO IN
To Video/Audio OUT
Video/Audio cord (not supplied)
GAME CONSOLE
or
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 12
Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as
shown below.
Right of the unit
Front
Speaker
To COAXIAL OUT
Subwoofer
(Right)
TV
Front
Speaker
(Left)
Coaxial digital cable
(not supplied)
To Coaxial
Center Speaker
Digital Audio Input
Surround
Surround
Speaker
(Right)
Speaker (Left)
AV Amplifier with built-in digital surround decoder
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear and right of the unit
To HDMI output
HDMI cable (type A connector)
(not supplied)
HDMI device
DVI device
or
To HDMI IN
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
To AUDIO IN
To DVI output
Download from Www.Somanuals.com. All Manuals Search And Download.
13 EN
Connections to other equipment
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S
RESOLUTION AND REFRESH RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case
of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the
AUDIO IN (L/R) connector of the AUDIO IN (L/R) jack of the TV.You can also connect the PC with HDMI cable.
If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect
audio cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Rear and right of the unit
Monitor Display modes
Mode
Resolution Refresh rate
VGA
VGA
640x480 60/ 75 Hz
720x400 70Hz
SVGA
XGA
WXGA
SXGA
800x600 60/ 75 Hz
1024x768 60/ 70/ 75 Hz
1360x768 60Hz
1280x1024 60Hz
To HDMI IN
WXGA+ 1440x900 60Hz
WSXGA+ 1680x1050 60Hz
HDMI cable (not supplied)
VGA cable (not supplied)
Audio cord (not supplied)
To AUDIO IN
To PC
FHD
1920x1080 60Hz
MONITOR IN
To return to normal mode
Press INPUT SELECT again.
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, “No Signal” will appear on the TV-screen.
• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal,
which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto”
or other Position Adjustment functions may fail to correct the image position.
To solve this problem, change the PC settings to select another resolution.
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV’s remote control.
Right of the unit
Amplifier
To AUDIO (L/R) OUT
To Audio (L) Input
Audio cord (not supplied)
To Audio (R) Input
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 14
Starting setup
TV operation
The Initial Setup menu appears the first time you
turn on the TV, and assists you to specify the
Air/Cable setting, and program your channels
automatically.
To turn on the TV, press POWER. (POWER
1
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.)
Adjust the volume level by pressing VOL + or – .
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
2
The volume level will be indicated on the screen
by brown bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of brown bars also decreases.
To turn on the TV, press POWER. (POWER
1
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.) The Initial Setup function
begins.
Set the signal type option to the appropriate
3
4
position (see “Air/Cable selection” on page 20).
Press the Direct Channel Selection (0-9, –)
Initial Setup
buttons to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
TV Location
Go to next step
Store
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
Press ▲ or ▼ to select “TV Location”, then press
◀ or ▶ to select “Store” or “Home”. This product
qualifies for ENERGY STAR In Home mode
default setting. Then press ▼ or ENTER.
2
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
NOTE:
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
• This unit has been preset to STORE
brightness.This setting does not qualify
under ENERGY STAR.To reduce brightness
and energy consumption, change setting
to ‘HOME’.This setting does qualify under
ENERGY STAR.
TO SELECT DIGITAL CHANNELS
Press the first 1-3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 15-1, press 1, 5, –, 1,
then press ENTER.
Press ▶ or ENTER to go to next step.
3
4
• If a channel is selected with only audio content,
“Audio Only” will be displayed on the screen.
• If a channel is selected with a weak digital
signal, “No Signal” will be displayed on the
screen.
Press ◀ or ▶ to select your time zone, then
press ▼ or ENTER.
• In the rare event that you live within broadcast
range of two stations in two different time
zones, the TV may recognize the wrong
station for the auto clock set.
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.
Press ◀ or ▶ to select daylight saving time on
5
6
or off, then press ▼ or ENTER.
VHF/UHF/CABLE CHANNELS
Press ◀ or ▶ to select desired time format, then
Air
Cable
press ▼ or ENTER.
VHF
VHF
Press ▶ or ENTER to go to next step.
7
2-13
2-13
Press ▲ or ▼ to select “Air/Cable”, then press
◀ or ▶ to select signal type that you using, then
press ▼ or ENTER.
UHF
STD/HRC/IRC
8
14-69
14-36
(A) (W)
37-59
60-85
86-94
95-99
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
Press ▶ or ENTER to go to next step.
9
Auto scan will begin. After tuning is completed,
10 the TV channel appears on the screen.
(A-5) (A-1)
100-135 (100) (135)
• Depending on the reception condition, it
may take up to 30 minutes to complete
memorizing digital cable channels. Please
allow the process to complete without
interruption.
01
(4A)
NOTE:
•
•
If a channel with no broadcast is selected, the sound will
automatically be muted.
It may take a few seconds for a digital channel picture to
NOTE:
appear on screen after being selected.
•
If you press MENU or EXIT in the process of “Automatic
Search”, the Auto scan stops and changes to normal
screen.
To select the video input source
To view a signal from another device connected
to your TV, such as a VCR player, press INPUT
SELECT, then press ▲ or ▼, then press ENTER.
•
When you make a menu selection, your changes occur
immediately.You do not have to press MENU to see your
changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
15 EN
CH
/
Quick guide for menu
operation
Press and release CH
/
. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Channel setup”
on page 20.
Call menu and for example: Select Language.
Press INPUT SELECT to select TV mode.
1
DISPLAY
Press MENU. The TV menu screen will appear.
Press DISPLAY to display the current information on
2
the screen.
Picture
Sound
Time
Setup
Standard
Lock
Channel
When the TV receives a digital signal, the digital
information will appear.
Picture Preference
Brightness
Contrast
50
50
50
50
50
Service1
Monoscope_480i_1
CC
SD
15-1
CH-1
Color
Tint
Sharpness
480i Audio 2/3
TV-14-D
Good
2013/01/01 17:10
Color Temperature
Advanced Settings
Normal
3_ARTE_Monosco_0820_0000_0030_Audio6_ABCDEFGHIJKLMNOPQ
RSTUVWXYZabcdefghijklmnopqrstuvwxyz_ABCDEFGHIJKLMNOPQR
STUVWXYZabcdefghijklmnopqrs
TUVWXYZabcdefghijklmnopqrs
tuvwxyz_ABCDEFGHIJKLMNOPQRS
Press ◀ or ▶ to select “Setup”, then press ▼.
3
4
• Channel number
• DTV Signal condition
Press ▲ or ▼ to select “Language”, then press ◀
or ▶ to select the desired language.
…on the following pages the menu can be called
in the same way as here.
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Program guide
• Resolution
• Current date and time
• Audio language
• Closed Caption
Press MENU to return to the previous screen.
5
Press DISPLAY again to clear the call display.
NOTE:
NOTE:
• If no buttons are pressed for more than about 30
(depending on your setting) seconds, the menu
screen will return to normal operation automatically.
• During TV or external input mode (except PC input
mode), if there is no signal reception, the TV will
change to standby after approx. 15 minutes (in PC
input mode: 1 minute).
• After a few seconds, DISPLAY screen will return to
normal TV operation automatically.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
change for each press of the SLEEP button (Off, 5
min, 10 min, ..., 240 min).To confirm the sleep timer
setting, press SLEEP and the remaining time will
be displayed for a few seconds. To cancel the sleep
timer, press SLEEP repeatedly until the display turns
to Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 16
Convenience functions
You can change the default settings by pressing the MENU button on your remote, then select the one of the
icons at the top of the menu - follow the On-Screen prompts to set your preferences.
Icon
Selected Items
Setup hint
Picture
Picture Preference
Power Saving
Standard
Dynamic
Soft
The darker the brightness for power-saving
Standard picture quality
Bright and dynamic picture
Soft edge picture setting
User
Your personal preferences
Brightness
Contrast
Color
You can adjust the picture quality to your preference.
• Available only when you selected “User”.
• “Tint” is available only in Analog TV and AV mode.
Tint
Sharpness
Color Temperature
Advanced Settings
Picture Size
Cool (Bluish) / Standard (Neutral) / Warm (Reddish)
See page 24.
Noise Reduction
To set the level of decreasing noises included in the video
signal.
Medium / High / Off /
Low
DBC
Use this feature to change the Black level automatically
according to the brightness of an image. The Black level will
become dark in a dark scene. If “ECO” is selected, the power
consumption is reduced.
Off / ECO / On
• DBC is not available in Media mode.
DLC
DLC (Dynamic Luminance Contrast) function would adjust
the luminance follow the average brightness automatically
Off / On
Film Mode
Off / On
HDMI Mode
Video / Graphic
A smoother motion may be obtained by setting the Film
Mode to “On”.
Select the HDMI input signal as Video (for video) or Graphic
(for PC).
Download from Www.Somanuals.com. All Manuals Search And Download.
17 EN
Convenience functions
Icon
Selected Items
Setup hint
Sound
Equalizer Settings
Equalizer Mode
Standard / Music /
You can choose a basic equalizer mode. Depending on this
setting, the following detail setting is set to default value of
each mode.
Movie / Sports
User
150 Hz / 500 Hz/ The setting of this item adjusts the audio level of its
1K Hz/5K Hz/
10K Hz
frequency corresponding to each setting.
• Available only when you selected “User”.
Balance
Adjust the left and right sound channel volume.
MTS
The multi-channel TV sound (MTS) feature provides high-
fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language or other
audio information. This item is valid only when the analog
broadcast.
Stereo / SAP / Mono
Audio Language
English / French / Spanish
When two or more audio languages are included in a digital
signal, you can select one of the audio language. (This
function is available only for digital broadcast.)
Digital Audio Output
Raw / Off / PCM
Select the format for your digital audio output If you have
connected an amplifier / receiver to the digital audio jack on
your TV.
Surround
The dynamic presence and sound created offers a thoroughly
enjoyable listening experience.
Off / On
Auto Volume
Off / On
Volume level can be adjusted automatically by the sound
level.
Time
Sleep Timer
Sleep Timer switches the TV to standby after a defined
period of time.
Off / 5 / 10 / 15 / 30 / 60 / 90 /
120 / 180 / 240 min
Time Zone
To cancel the Sleep Timer, set to “Off”.
Select your local time zone for auto clock feature.
You can select Newfoundland, Atlantic, Eastern, Central,
Mountain, Pacific, Alaska, Hawaii and Samoa.
If you want to activate the daylight saving time, select “On”.
Daylight Saving Time
Off / On
Time Format
12-hour / 24-hour
Auto Clock
Select the time format.
The Auto Clock function will automatically set the built-in
clock (Year, Month, Day and Time) when the TV is connected
to an antenna or cable TV system and it is turned off. As
the TV searches for a receivable station in your area and it
receives a broadcast signal for Auto Clock, the Auto Clock
needs several minutes to set itself.
Off / On
Clock
Using the ▲/▼/◀/▶, the setting value is changed.
• Available only when you selected “Auto Clock” to “Off”.
Auto Sleep
When the Set and Remote button operation are not operated
with specified period by this setting (3/4/5 Hours), the power
status is changed to stand by mode automatically.
Off / 3 / 4 / 5 Hours
On Timer
Power On Timer
Off/Once/On
Timer
You can set the On Timer to automatically turn on the TV.
To cancel the On Timer, select “Off”.
Set the timer using ▲/▼/◀/▶.
You can set the channel that appear with power on.
Power On Channel
Off Timer
Power Off Timer
Off/Once/On
Timer
You can set the Off Timer to automatically turn off the TV.
To cancel the Off Timer, select “Off”.
Set the timer using ▲/▼/◀/▶.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 18
Convenience functions
Icon
Selected Items
Setup hint
Setup
Language
English / Français / Español
You can choose from three different languages (English,
Français (French) and Español (Spanish)) for the on-screen
displays.
Select the language you prefer first, then proceed with the
other menu options.
OSD Timeout
5 / 15 / 30 / 45 / 60 Sec.
Closed Caption
Over Scan
Off / On
Input Label
You can set the display time of OSD Menu.
See page 23.
To adjust the size of the display by removing excess or
unattractive when set it to”On”.
The Input Label feature allows you to label each input source
for your TV.
Default / Antenna / Cable /
You can select label from default value or input by yourself
with ▲/▼ (alphabet select) / ◀/▶ (select character / position).
Satellite / DTV / DVD / Blu-ray /
HD-DVD / XBOX / Wii / PS3 /
Game / Computer / VCR / DV /
Custom (10 characters)
PC Settings (available only for PC mode)
H-Pos
V-Pos
Clock
Phase
Auto
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the vertical (CLOCK) interfering lines.
Eliminates the horizontal (PHASE) interfering lines.
To adjust the all PC settings automatically.
Other Settings
Audio Only
Off / On
You can turn off the picture on your TV and listen to the pro-
gram audio only.
To exit audio only mode, press any buttons (except VOL +/-,
MUTE) on your remote control or unit.
TV Location
Store / Home
Select location of TV. Usually, select “Home”.
Restore Default
No / Yes
Select “Yes”, then press ENTER. Restore Picture, Sound
(except “Audio Language”), Time (Sleep Timer, Time Format
and Auto Sleep only) and Setup (except “Language”)
settings to the default factory settings.
Initial Setup
See page 15. (TV mode only)
See page 21.
Lock
Channel
See page 20.
Download from Www.Somanuals.com. All Manuals Search And Download.
19 EN
receive a list based on your address or zip code.
Should you require further assistance you may call
our toll-free customer service line at 1-800-289-0980.
• New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
Channel setup
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna,
set the signal type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
The new channel will be added into the channel
3
memory.
Show/Hide channel
You can select the channel that you want to skip.
Air/Cable selection
Select “Channel ⇒ Show/Hide”, then press ▶ or
1
2
ENTER.
Select “Channel ⇒ Air/Cable”.
1
Press ▲ or ▼ to select the channel that you want
Press ◀ or ▶ to select “Air” or “Cable”.
2
to skip.
Air - VHF/UHF channels
Cable - CABLE TV channels
Picture
Sound
Time
Setup
Lock
Hide
Channel
Channel
Channel Label
4-0
7-0
12-0
23-2
23-3
23-77
23-999
Picture
Sound
Time
Setup
Cable
Lock
Channel
Air/Cable
Automatic Search
Channel List
Show/Hide
Channel Number
Channel Label
CH-2
CH-3
CH-77
CH-999
23
CH-2
Prev
Next
1/1
Press ENTER to assign mark for unwanted
P
3
4
channel.
NOTE:
Repeat steps 2 - 3 for other channels you want to
show/hide.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
Automatic Search
Select “Channel ⇒ Automatic Search”, then press
1
▶ or ENTER.
Picture
Sound
Time
Setup
Lock
Channel
Are you sure to
Automatic Search?
No
Yes
In confirmation window, Press ▶ to select “Yes”,
then press ENTER. The TV will begin memorizing
all the channels available in your area.
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a bar
display may not advance for several minutes,
please be patient.
2
• If you press MENU during search, channel
search will stop.
NOTE:
•
Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels can
only be accomplished while a station is broadcasting
a digital signal to set that channel into memory.
• If you are unsure of the digital channels available
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 20
Labeling channels
Setting the V-Chip
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you
may choose to exclude. The restriction applies to “TV
Rating” and “Movie Rating” if this data is transmitted.
You may set this restriction separately. To use the
V-Chip function, you must register a password.
You can choose any 7 characters to identify a
channel.
To create channel labels
To register a password
Select “Channel ⇒ Channel Number”.
1
Select “Lock”, then press ▼.
1
Press ◀ or ▶ to select a channel you want to
2
Press 0000 using Number buttons(0-9). (This is
2
label, then press ▼ to select “Channel Label”.
default password.)
Then press ▶ or ENTER.
Picture
Sound
Time
Setup
Lock
Channel
Picture
Sound
Time
Setup
Cable
Lock
Channel
Enter Password
Air/Cable
Automatic Search
Channel List
Show/Hide
Channel Number
Channel Label
“
” appears instead of the number.
23
CH-2
NOTE:
• If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
Press ▲ or ▼ repeatedly until the character you
3
want appears in the first space.
Picture
Sound
Time
Setup
Lock
Channel
How to enter the V-Chip menu
Select “Lock” menu, then press ▼.
1
C
H
3
Use Number buttons (0-9) to enter your
2
password.
If the character which you desire appears, press ▶.
You can also change the position which input
To V-Chip connected devices
character by pressing ◀ or ▶
.
In the Lock menu, press ▲ or ▼ to select “V-Chip”,
1
2
Repeat this step to enter the rest of the characters.
then press ◀ or ▶ to set to “On”.
Repeat steps 2-3 for other channel.You can
assign a label to each channel.
4
5
Press ▲ or ▼ to select “Input Block”, then press ▶
or ENTER.
When you finish inputting the label name, press
EXIT to return to the normal screen.
Picture
Sound
Time
Setup
UnBlock
UnBlock
Lock
Channel
NOTE:
TV
AV
• The channel labels will be reset after “Automatic
Search” on page 20.
Component
HDMI1
HDMI2
HDMI3
PC
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
Media
Press ▲ or ▼ to select which device will be
3
blocked, then press ◀ or ▶ to select “Block”.
NOTE:
• If you want to use such a device again, you should
setting “UnBlock” in step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
21 EN
To set the V-Chip
Enter a current password using Number buttons
2
3
4
(0-9).
In the V-Chip menu, press ▲ or ▼ to select
1
“ V-Chip” then press ◀ or ▶ to set to “On”.
Enter a new password using Number buttons
(0-9).
Press ▲ or ▼ to select “US Rating”, then press ▶
2
3
or ENTER.
Enter the same password again to confirm.
The password is now registered.
Press ▲ or ▼ to select which rating will be used,
then press ▶ or ENTER. Each rating below will
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
appear.
TV Rating
Picture
Sound
Time
Setup
Lock
Channel
TV-Y
To download the additional V-Chip rating system
TV-Y7
TV-G
(when available)
TV-PG
TV-14
TV-MA
In the V-Chip menu, press ▲ or ▼ to select
1
2
3
“ V-Chip” then press ◀ or ▶ to set to “On”.
Press ▲ or ▼ to select “V-Chip Set (DTV)”, then
press ▶ or ENTER.
You can set the rating using age level and genre.
If the TV is not storing the additional rating
Age:
system, the TV will begin downloading it, which
may take some time to be completed.
TV-Y
: All children
TV-Y7 : 7 years old and above
Set your preferred content rating limits for the
TV-G
: General audience
4
additional rating system.
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
NOTE:
• You can only download the additional V-Chip rating
system when your TV is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV.
When you select TV-Y7, TV-PG, TV-14 or TV-MA,
press DISPLAY to explain the rating.
Genre:
FV
V
: Fantasy Violence
:Violence
• The standard V-Chip rating system is available
whether your TV is receiving a digital signal or not,
and will block both analog and digital programs.
To set the restriction level using the standard V-Chip
rating system, select “US Rating” in step 2.
• The downloadable V-Chip rating system is an
evolving technology, and availability, content, and
format may vary.
S
: Sex
L
: Language
: Dialogue
D
Press ▲/▼ to select the desired rating, then press
ENTER.
Movie Rating
Off
: None
G
: All ages
To clear the V-Chip Set (DTV)
PG
: Parental guidance
PG-13 : Parental guidance less than 13 years old
In the V-Chip menu, press ▲ or ▼ to select
1
2
R
: Under 17 years old parental guidance
suggested
“ V-Chip” then press ◀ or ▶ to set to “On”.
Press ▲ or ▼ to select “RRT Clear”, then press
NC-17 : 17 years old and above
▶ or ENTER.
X
: Adult only
The confirmation window will appear.
Press ◀/▶ to select the desired rating.
Press ▶ to select “Yes”, then press ENTER.
3
Your V-Chip Set (DTV) will clear.
Press EXIT to return to the normal screen.
4
NOTE:
V-Chip function is activated now.
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
To change the password
In the V-Chip menu, press ▲ or ▼ to select
1
“Change Password”, then press ▶ or ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 22
• CC Setting will be change to”CC Off”,”CC On”
or “CC on Muting” by each pressing CCD on the
remote control.
Closed Caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and
display Closed Captioned television programs.
Closed Captioning will display text on the screen
for hearing impaired viewers or it will translate and
display text in another language.
CC options
When you have selected “Custom” as the display
method, you can adjust the various setting listed
below as follows:
Captions: This Closed Caption mode will display
text on the screen in English or another language.
Generally, Closed Captions in English are transmitted
on CC1 and Closed Captions in other languages are
transmitted on CC2.
This feature is designed to customize Digital Caption
only.
Select “Setup ⇒ Closed Caption”, then press ▶ or
1
2
3
4
ENTER.
Text: The Text Closed Caption mode will usually fill
1/2 of the screen with a programming schedule or
other information.
Press ◀ or ▶ to set “CC Setting” to “CC On” or
“CC on Muting”.
Press ▲ or ▼ to select “Digital Caption Style”,
then press ▶ or ENTER.
Select “Setup ⇒ Closed Caption”, then press ▶ or
1
ENTER.
Press ▲ or ▼ to select “Digital CC Preset”, then
press ◀ or ▶ to select “Custom”.
Press ◀ or ▶ to set “CC Setting” to “CC On” or
2
“CC on Muting”.
Press ▲ or ▼ to select the desired item, then
press ◀ or ▶ to change the setting.
5
CC On: Captions will be displayed on the screen.
CC on Muting: Only when you press MUTE,
captions will be displayed.
CC Off: Captions will not be displayed on the screen.
Picture
Sound
Time
Setup
Default
Lock
Channel
Press ▲ or ▼ to select “Analog Caption” or “Digital
Digital CC Preset
Text Style
Text Size
Text Edge Style
Text Edge Color
Text Color
Background Color
Text Opacity
3
Caption”.
Default
Default
Default
Default
Default
Default
Default
Default
When you select “Analog Caption”, you can
choose from CC1~4, Text1~4.
When you select “Digital Caption”, you can
choose from Service1~6 and Off.
Background Opacity
Press ◀ or ▶ to select the desired Closed Caption
4
mode for both Digital and Analog Captions.
You can select from among the following items
and parameters.
NOTE:
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two
kind of captions are overlapping.
Text Style:
Select display font style.
Text Size:
Select display font size.
Text Edge Style:
NOTE:
• If the program or video you selected is not closed-
captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to “CC Off”.
Select display font edge style.
Text Edge Color:
Select display font edge color.
Text Color:
Select foreground color.
Background Color:
Select background color.
Text Opacity:
• When selecting Closed Captions, the captioning
will be delayed approx. 10 seconds.
•
If no caption signal is received, no captions will
appear, but the television will remain in the Caption
mode.
Select foreground opacity level.
Background Opacity:
Select background opacity level.
• Misspellings or unusual characters may
occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially
with live programs. This is because during live
programs, captions are also entered live. These
transmissions do not allow time for editing.
NOTE:
• You cannot set both “Text Color” and “Background
Color” as a same color.
• When Captions are being displayed, on-screen
displays, such as volume and mute may be seen
but may interfere with Closed Captions.
• Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is
very poor, the closed caption decoder may not
appear or may appear with strange characters or
misspelled words. In this case, adjust the antenna
for better reception or use an outdoor antenna.
Download from Www.Somanuals.com. All Manuals Search And Download.
23 EN
Native (for PC mode only)
Setting the picture size
Detects the resolution of the signal of the image and it
will be shown on the screen with same amount of pixels.
You can change to a variety of picture sizes—
Natural, Full, Zoom, Cinema, Native (For PC
mode only).
Selecting the picture size
Select “Picture ⇒ Advanced Settings ⇒ Picture
1
Size”.
Press ◀ or ▶ to select the desired picture size, as
2
described below.
NOTE:
• Selectable picture sizes may vary depending on the
input source or broadcast signal.
• You can be select desired size of picture by
pressing PICTURE SIZE on the remote control.
Natural
In some cases, this image will display the size of
standard 4:3 with a black side bar.
Full
Full will display the picture at the maximum size.
Zoom (for letter box programs with
subtitles)
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - -
Cinema (for letter box programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
Full
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 24
Playback files
Media Playback
Press ◀ or ▶ to select Photo or Movie at Media
1
2
3
You can enjoy viewing pictures and movies from
your USB storage device.
Selection and press ENTER.
Press ◀ or ▶ to select “C”, then press ENTER.
Connect the USB storage device into the USB
1
Input terminal.
Select folder or file with ▲/▼/◀/▶, and then start
Press INPUT SELECT then press ▲ or ▼ to select
2
the playback with ENTER.
“Media”, then press ENTER.
NOTE:
You can playback the files with the following remote
• Do not disconnect a USB storage device while it is
being accessed. Doing so can damage the device
or the files stored on the device. You can safely
connect or disconnect the USB storage device
when the TV is not in media mode.
• Back up all the data in the USB storage device in
case if data was lost due to unexpected accident.
We do not assume any liability for the losses by
misuse or malfunction.
control buttons.
Button Action
Press to start the playback.
ENTER
Press to open the folder.
Press to open the operation window.
▌▌
Press to pause the playback.
• Not all USB storage devices are compatible with
this TV.
Press to start the playback or slideshow.
Press to stop the playback.
▶
■
• The character that exceeds the display area is not
displayed.
• Do not use USB extension cable.
• Playable files are JPEG (.jpg/.jpeg) and Motion
JPEG (.avi (MJPEG format)).
During the playback, press to select the next
file.
During the playback, press to select the
previous file.
Media Browser
Media Selection
During the playback, press to select search
forward.
¡
1
During the playback, press to select search
backward.
Photo
Movie
File Selection
C:\
1
/
1
Return
Photo7.jpg
Resolution: 1920
x
1080
Size:
Date:
Time:
2000Kbytes
----
--
/
--
:
/
--
:
--
--
Photo2.jpg
Photo6.jpg
Photo8.jpg
Photo9.jpg
Photo1.jpg
Information window
NOTE:
• The content will change in accordance with each
media setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
25 EN
Details of operation commands
Icon Operation
Play / Resume playback.
▐▐
▶
Pause.
Skip file to reverse / forward direction.
Stop.
■
Repeat playback.
Press ENTER repeatedly to select desired
repeat option.
Show the playlist.
Press ▲ or ▼ and ENTER to select the playback
Show the file information.
Rotate the image.
Zoom in / out.
Move the frame from the center position.
Review / Fast playback.
Select start point, then select end point.
Repeat material between two selected points.
Slow-motion Playback.
One frame is advanced each time select this
command.
Direct jump by desired time.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 26
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hills or other large
objects. Changing the direction or position of the antenna may improve
the reception.
SNOW
If the TV is located far from the TV station, in a fringe reception area where
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna
may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a loss of
contrast in the picture. Changing the direction and position of the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
27 EN
Troubleshooting
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer
or service outlet if problems persist. Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
SYMPTOMS
POSSIBLE SOLUTIONS
Digital
• Make sure the power cord is plugged in.
broadcasting
screen
• Try another AC outlet.
• Check digital signal strength.
TV does not
operate.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back
in.
problem.
• Check all Cable TV connections.
• Set Signal Type menu option to the
Cable mode.
• Station or Cable TV experiencing
problems, tune to another station.
• Check sound adjustments (VOL +/- or
MUTE).
No CATV
reception.
• Station or Cable TV system problems,
Poor sound
or no sound.
try another station.
• Check for sources of possible
interference.
• Check antenna connections, adjust or
re-direct antenna.
Horizontal or
diagonal bars
on screen.
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Make sure Signal Type option is in the
No reception
above
Poor picture • Check antenna or Cable TV
appropriate mode.
or no picture.
connections, adjust antenna.
• Check for sources of possible
interference.
• If using antenna, check UHF antenna
connections.
channel 13.
• Batteries are weak, dead or inserted
• Check picture control adjustments.
incorrectly.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to
receive desired station.
• Remote is out of range, move closer to
TV (within 15 feet).
No Remote
operation.
Poor
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions
between the Remote and the TV.
• Make sure the power cord is plugged in.
reception on
some
channels.
• Check for sources of possible
interference.
• Sleep Timer is set.
TV shuts off.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Power interrupted.
• TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
Poor color or • Check picture control adjustments.
Closed
no color.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
Caption is not
activated.
• Check Cable TV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Set closed caption decoder in the menu.
TV is not
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Adjust antenna.
• Select proper language in the menu
options.
shown in your
language.
Picture
wobbles or
drifts.
BLOCK NOISE / PICTURE FREEZE
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 28
Specifications
GENERAL
Power supply:
AC 120V, 60Hz
Power consumption:
Operation: 130W
Stand by: 0.5W
17.0kg (37.5 lbs)
Width: 1,155 mm(45-15/32 inches)
Height: 737 mm(29-1/64 inches)
Depth: 237 mm(9-21/64 inches)
5˚C - 40˚C
Less than 80% RH
Weight:
Dimensions:
Operating temperature:
Operating humidity:
Type:
Display method:
Number of Pixels:
Broadcasting system:
1257.3mmV(50”class/49.50 diagonal)
Transmission TFT color LCD panel
1920 (H) × 1080 (V)
US System M
ATSC standard (8VSB), QAM
Receiving channels:
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Tuner type:
Inputs:
Frequency synthesized
Video: (RCA) 1 V (p-p), 75 ohms
Audio:
(RCA) –8 dBm/50k ohms
Component video:
(Y) 1 V (p-p), 75 ohms
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI: HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 480p, 480i, 720p,1080i,1080p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor: Mini-Dsub 15pin
Antenna:
VHF/UHF In 75 ohms coaxial
Output:
Speakers:
Audio output power:
ACCESSORIES
Digital audio out:
0.5 V (p-p), 75 ohms terminated
40.6 mm × 121.9 mm (1-5/8 inches × 4-13/16 inches), 8 ohms × 2
10.0W + 10.0W
Remote control
Batteries (AAA) × 2
Stand
Screws (4×12mm (5/32 × 15/32 inches)) × 5
Designs and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
29 EN
limited
WARRANTY
50” CLASS LED-LCD HDTV
ORION warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a period of 1 year from date of original purchase in the United States.
Should service be necessary under this warranty for any reason due to a manufacturing defect or
malfunction during the first 12 months from date of original purchase, ORION will provide in-home repair service only
by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing
defect in material and workmanship within one year from date of original purchase we will replace the defective
part, provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION authorized Independent Service Centers located throughout the country. For the one
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service
Centers in your area please call - 1-888-296-7466 for assistance.
Note:This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident.
(b) Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect
warranty repairs to the class of product or by the ORION Factory Service Center.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
(a) Damage to equipment not properly connected to the product.
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s
manual.
(e) Signal reception problems caused by external antenna or cable systems.
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR
ANY PARTICULAR PURPOSE AND USE.
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 30
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
Download from Www.Somanuals.com. All Manuals Search And Download.
|