SanDisk uSSD 5000
Product Manual
SanDisk uSSD 5000
Product Manual
Revision 1
October 08
SanDisk Corporation
Corporate Headquarters • 601 McCarthy Blvd. • Milpitas, CA 95035
Phone (408) 801-1000 • Fax (408) 801-8657
© 2008 SanDisk® Corporation
1
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
List of Tables
© 2008 SanDisk® Corporation
ii
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
1. Introduction
1.1 General Description
The SanDisk uSSD takes the benefits of flash storage to new markets with
low-capacity storage requirements, most notably the low-cost PC (LCPC).
Rugged and reliable, it is a fraction of the size and cost of a hard disk drive
(HDD) in the 1 to 16 GB range. SanDisk adds high performance to the uSSD
offering, based on an advanced controller that exemplifies the company’s
years of USB expertise.
1.1.1 Applications
The SanDisk uSSD offers a no-compromise flash-based storage solution for:
LCPCs that need rugged reliability and require up to 4 GB. The uSSD can
meet these requirements more cost-effectively than an HDD
Desktops that support Microsoft® Vista and can benefit from enabling
ReadyBoost® up to 4GB.
Point of sale (POS) stations, where the uSSD replaces the HDD
Blade servers, where the uSSD is ideal to store critical backup files and
provide boot functionality
1.1.2 Rugged and Reliable
Unlike the HDD, the SanDisk uSSD has no moving parts. It keeps working in
challenging environments such as classrooms, kiosks and on space-restricted
server floors. The patented flash management technology brings top data
integrity to the uSSD, even during power losses. Dynamic bad block
management, dynamic and static wear-leveling, and robust error detection
and correction code (EDC/ECC) ensure data reliability.
1.1.3 High Performance
The uSSD achieves a sustained read speed as high as 30 MB/sec and a
sustained write speed of up to 20 MB/sec with single-level cell (SLC)
technology.
1.1.4 Cost Effective
There is no need to pay for more capacity than you require. The uSSD lets you
purchase just the right amount of storage, packed inside a memory device
that’s 25% smaller than a 1.8” HDD. It offers you the choice of single-level
cell (SLC) flash technology or the more cost-effective multi-level cell (MLC)
technology.
© 2008 SanDisk® Corporation
3
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
1.2 Features
The SanDisk uSSD 5000 provides the following system features:
Non-volatile storage (no battery required)
USB 2.0 interface, certified by the USB organization
Complies with Microsoft Vista ReadyBoost® requirements
Up to 16 GB of mass storage based on SanDisk’s reliable flash technology
SLC flash and MLC flash-based configurations
Fixed configuration (not removable)
Low power consumption
High performance:
Sustained Read and write speed of up to 30 MB/sec for reading, 20 MB/sec
for writing (SLC configuration)
Rugged
Lightweight
Silent
Standard and low profile
Advanced error detection and error correction algorithms
Advanced wear-leveling algorithms
Guaranteed data integrity even after power loss
MTTF > 8,000,000 hours
Multiple OS support
Warranty: 3 years
© 2008 SanDisk® Corporation
4
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
1.3 Scope
This document describes the key features and specifications of the uSSD 5000,
as well as the information required to interface this product to a host system.
1.3.1 Technology Independence
To write or read a sector (or multiple sectors), the host computer software
simply issues a Read or Write command to the module.
This command contains the address and the number of sectors to write/read.
The host software then waits for the command to be completed.
The host software does not participate in the details of how the flash memory
is erased, programmed or read. This is extremely important as flash devices
are expected to increase in complexity in the future. Because the uSSD 5000
uses an intelligent on-board controller, the host system software will not need
to be changed as new flash memory evolves. As such, systems that support
uSSD 5000 now will be able to access future SanDisk Modules built with new
flash technology without any need to update or change the host software.
1.3.2 Defect and Error Management
The uSSD 5000 contains a sophisticated defect and error management
system.
If necessary, the Module will rewrite data from a defective sector to a good
sector. This is completely transparent to the host and does not consume any
user data space.
The uSSD 5000 soft error rate specification is much better than the magnetic
disk drive specification.
In the extremely rare case that a read error does occur, the uSSD 5000 has
innovative algorithms to recover the data by using hardware on-the-fly Error
Detection Code/Error Correction Code (EDC/ECC), based on a BCH algorithm.
These defect and error management systems, coupled with solid state
construction, give the SanDisk uSSD 5000 unparalleled reliability.
1.3.3 Wear-leveling
Wear-leveling is an inherent part of the erase-pooling functionality of the
SanDisk uSSD 5000, using NAND memory.
Advanced features of dynamic and static wear-leveling and automatic block
management are used to ensure high data reliability and maximize flash life
expectancy.
1.3.4 Bad Block Management
Bad blocks are occasionally created during the lifecycle of a flash component,
in a phenomenon called dynamic bad block accumulation. These bad blocks
must be dynamically marked and replaced to prevent read/write failures.
When a bad block is detected, the embedded bad block mapping algorithm
maps out the block, which is then no longer used for storage.
© 2008 SanDisk® Corporation
5
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2. Product Specifications
For all the following specifications, unless otherwise stated, values are defined
at ambient temperature and nominal supply voltage.
2.1 Formatted Capacities
Table 1 shows the formatted capacities for the uSSD 5000:
Table 1: Formatted Capacities
Capacity Capacity (formatted
Sectors/Module
(Max. LBA+1)
No. of
Heads
No. of Sectors/
Track
No. of
Cylinders
[GB]
in bytes)
SLC Configurations
1
2
4
8
16
16
16
16
63
63
63
63
1,942
3,969
7,963
15,928
1,002,438,656
2,048,900,608
4,110,188,032
8,220,645,376
1,957,537
4,001,760
8,027,712
16,055,949
MLC Configurations
2
4
2,048,900,608
4,110,188,032
8,220,645,376
16,441,481,216
4,001,760
8,027,712
16,055,949
32,112,269
16
16
16
16
63
63
63
63
3,969
7,963
8
15,928
31,857
16
2.2 System Environmental Specifications
Table 2 lists the environmental specifications, including temperature, noise
level, vibration, shock and altitude.
Table 2: Environmental Specifications
Specification
Parameters
Operating (Commercial): 0° C to 70° C
Temperature
Storage temp without user data retention: -40° C to 85° C
Storage temp with user data retention: 0° C to 70° C
Noise Level
Vibration
0 dB
Operating: 2.17gRMS (20Hz to 2000Hz, 3 vibration axes, 60 min)
Non operating: 3.08 gRMS (20 Hz to 2000 Hz)
Shock
Operating: 50 g, 11 msec duration, half sine
Non operating: 1,500 g, 0.5 msec duration, half sine
Altitude (relative to sea
level)
80,000 ft. maximum
ESD
Contact discharge: Up to 4 KV (enclosed in a host)
Air discharge: Up to 8 KV (enclosed in a host)
Flammability ratings for
major components
PCB: 888-1 94V0 HK
ASIC Packaging materials: 94V0
Flash packaging materials: 94V0
Labels: CM-100-SM, CM-200-WS
© 2008 SanDisk® Corporation
6
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.3 System Power Requirements
All values quoted in Table 3: Power Requirements
are typical at 25° C and nominal supply voltage unless otherwise stated.
Table 3: Power Requirements
Power Mode
Products
5V +/- 10% IDD
5V +/- 10% IDD
SLC 1GB, 2GB, 4GB,
8GB
MLC 4GB, 8GB, 16GB
MLC 2GB
2.5 mA
Standby
2.5 mA
200 mA
200 mA
100 mA
Operating HS Read
Operating HS Write
Idle HS
150 mA
150 mA
100 mA
2.4 Voltage Ramp Down Recommendation
Vflash_protect
Vflash_min
Tpoff
Memory
Binary
MLC
Min
1
Typ
Max
-
Unit
ms
ms
V
-
Tpoff
3
-
-
Vflash_protect
Vflash_min
Any
4.27
-
4.38
-
4.49
2.7
Any
V
© 2008 SanDisk® Corporation
7
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.5 System Performance
Table 4 lists the performance parameters of the SLC and MLC flash-based
configurations:
Table 4: Performance
Specification
Parameters
Maximum performance for 1 GB, 2 GB, 4GB and 8GB (SLC flash
configurations)
Sequential Read
Sequential Write
Random Read
Random Write
30 MB/sec
20 MB/sec
30 MB/sec
6 MB/sec
Maximum performance for 2 GB (MLC configuration)
Sequential Read
Sequential Write
Random Read
Random Write
27 MB/sec
6 MB/sec
25 MB/sec
2.2 MB/sec
Maximum performance for 4 GB, 8 GB and 16GB (MLC configuration)
Sequential Read
Sequential Write
Random Read
Random Write
27 MB/sec
12 MB/sec
25 MB/sec
3.5 MB/sec
Host compatibility
USB 2.0
Up to 60 MB/sec
Note: Random read and write were measured on Windows 2000 with HDBench on a 100MB file transfer
© 2008 SanDisk® Corporation
8
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.6 System Reliability
Table 5: Reliability
Specification
Parameters
Data Reliability
Error detection / error correction based on
BCH algorithm
Data integrity after power loss
Bad blocks
Data is guaranteed after power loss
Transparent bad block management
Dynamic and Static Wear-leveling
Wear-leveling
2.6.1 MTTF
The reliability figure of merit most often used for electronic equipment is Mean
Time To Failure (MTTF). SanDisk estimates MTTF using a prediction
methodology based on reliability data for the individual components in
SanDisk products.
Component data comes from several sources: device life tests, failure analysis
of earlier equipment, device physics, and field returns.
SanDisk uses following methods to predict reliability:
Telcordia Special Report SR-332, Reliability Prediction Procedure for
Electronic Equipment (RPP).
British Telecom Industry HRD5, Handbook of Reliability Data for Electronic
Components used in Telecommunication System.
Table 6 summarizes the MTTF prediction results for various uSSD
configurations. The analysis was performed using a RAM Commander™ failure
rate prediction.
Failure Rate: The total number of failures within an item population,
divided by the total number of life units expended by that population,
during a particular measurement interval under stated condition.
Mean Time To Failures (MTTF): A basic measure of reliability for
repairable items: The mean number of life units during which all parts of
the item perform within their specified limits, during a particular
measurement interval under stated conditions.
Table 6: uSSD MTTF
Product
Condition
MTTF (Hours)
1GB, 2GB, 4GB
8GB, 16GB
Telcordia SR-332, GB, 25°C
Telcordia SR-332, GB, 25°C
10M
8M
© 2008 SanDisk® Corporation
9
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.7 Endurance
The uSSD5000 SLC flash-based configurations have guaranteed endurance of
3 years for all capacities (1, 2, 4 and 8GB).
The uSSD5000 MLC flash-based configurations have guaranteed endurance of
3 years as follows:
BAPCO Student profile – uSSD MLC 8GB and up.
BAPCO Personal profile – uSSD MLC 4GB and up.
2.8 Electrical Interface
Table 7 lists the host interface on-board header pins and signals.
Table 7: Host Interface 2x5 On-Board Header
Pin
Signal
Pin
Signal
1
3
5
7
9
+5VDC
USB1 Data(-)
USB1 Data(+)
GND
2
4
+5VDC
USB2 Data(-)
USB2 Data(+)
GND
6
8
Key (no pin)
10
NC
2.8.1 uSSD Connector
Figure 1 illustrates the uSSD 2x5 device interface connector:
Figure 1: uSSD 2x5 Connector Pinout
© 2008 SanDisk® Corporation
10
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.8.2 Electrical Specifications
2.8.2.1 Absolute Maximum Ratings
Table 8: Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Ambient Operating Temperature Range (Commercial)
Power Supply Voltage Relative to Ground
TA
0
0
70
5.5
5.8
°C
V
Vbus
Vdata
Voltage level on D+ / D- Relative to Ground 3
-0.3
V
2.8.2.2 DC Characteristics
Table 9: DC Characteristics for Full-Speed Operation (TA = 25°C)
Parameter - USB Signals
Supply Voltage:
Symbol
Min
Typ
Max
Unit
VBUS
4.5
5.0
5.5
V
Supply Current (RMS):
-
-
120
1.6
150
2.5
Operating
Suspend
Icc
Iccs
mA
mA
Max Current Consumption (Peak Value)
Input Levels USB Signals (D+, D-):
-
-
150
mA
-
-
-
0.8
-
Low
High
VIL
VIH
V
V
2.0
Output Voltage USB Signals (D+, D-):
0.0
2.8
-
-
0.3
3.6
Low
High
VOL
VOH
V
V
-
-
Output Signal Crossover Voltage USB
Signals (D+, D-)
VCRS
1.3
2.0
V
Table 10: DC Characteristics for High-Speed Operation (TA = 25°C)
Parameter - USB Signals
Supply Voltage:
Symbol
Min
Typ
Max
Unit
VBUS
4.5
5.0
5.5
V
Supply Current (RMS)
120
1.6
150
2.5
Operating
Suspend
Icc
-
-
mA
mA
Iccs
Max Current Consumption (Peak Value)
Input Levels USB Signals (D+):
-
-
150
mA
-10
-
-
10
Low
High
VIL
VIH
mV
mV
360
440
Input Levels USB Signals ( D-):
360
-10
-
-
440
10
Low
High
VIL
VIH
mV
mV
Output Voltage USB Signals (D+, D-):
-10
10
Low
High
VOL
VOH
mV
mV
360
440
© 2008 SanDisk® Corporation
11
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.9 Physical Specifications
SanDisk offers the uSSD 5000 in 2 form factors:
Standard profile
Low profile
and dimensions of the uSSD 5000.
Table 11: Physical Dimensions
Dimension
Parameters
Weight
Length
Width
4.9g
Standard and Low Profile: 37.80 ± 0.25 mm
Standard and Low Profile:26.65 ± 0.25 mm
Thickness
Standard profile: 10.60 ± 0.25 mm
Low Profile: 6.58 ± 0.25 mm
2.9.1 Standard Configuration
Figure 2: uSSD Standard Version, Side View
© 2008 SanDisk® Corporation
12
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
Figure 3: uSSD Standard Version, Bottom View
2.9.2 Low Profile Configuration
Figure 4: uSSD 2x5 Low Profile Version, Side View
Figure 5: uSSD 2x5 Low Profile Version, Bottom View
2.9.3 uSSD-to-USB Adapter
An adapter is available to assist customers in evaluating the uSSD 5000. The
adapter enables inserting the uSSD 5000 in an external desktop or laptop USB
port.
The adaptor is available at its leaded format for purchasing and its SKU is
SDADP-UC-001
Figure 6: uSSD External USB Adapter
© 2008 SanDisk® Corporation
13
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.10 Product Markings and Traceability
SKU# Ordering Info See Appendix A for further options
SDUS5AB-001G - SD SanDisk
US5 uSSD 5000
A standard profile with LED /E low Profile with LED/
/F low Profile with external LED
B Binary (SLC)/J MLC
YYWWDMNNNNN –YY year
WW week
D Month day
M Subcontractor code
NNNNN Running serial number
Firmware# - according to Bill of Material
54-90-XXXXX-CCCC Internal SanDisk subunit Number
© 2008 SanDisk® Corporation
14
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
2.11 OS Support
The uSSD 5000 is supported under the operating systems listed in Table 12.
In the standard boot and storage modes, the uSSD 5000 is recognized as a
fixed disk in the system. The system can also boot from the uSSD 5000,
eliminating the need for additional components.
Software packages for the supported operating systems can be downloaded
from the SanDisk website, along with the relevant documentation.
Table 12: OS Support
Operating System
Version
Support
Windows XP Pro
Service Pack 2
SP2 FP 2008
32 bit + 64 bit
Service Pack 2
SanDisk driver
Native in the OS
Native in the OS
SanDisk driver
SanDisk driver
Native in the OS
Native in the OS
Native in the OS
Windows XP Embedded
Windows Vista (Storage and ReadyBoost support)
Windows Embedded for Point of Service (WEPOS)
Windows Server 2003
Windows CE
Linux
5.0 and 6.0
Kernel 2.6.XX
DOS
2.12 Regulatory Compliance
The uSSD 5000 complies with the following:
USB Organization certification
RoHS (6 Materials)
Chinese RoHS
FCC Class B for Information Technology [MIC, BMSI, VCCI]
CE EN 55022/55024
UL 60-950-1 CSA C22.2 No. 60950-1-03
WHQL for Windows Xp, Windows Vista and Windows server 2003
Windows Vista ReadyBoost® compliance
© 2008 SanDisk® Corporation
15
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
Ordering Information
Table 13: Ordering Information
Standard
Low
Profile
Internal External
SKU
Capacity
MLC Binary
Led
Led
Profile
SDUS5AB-001G
SDUS5EB-001G
SDUS5EB-001G-1190
SDUS5FB-001G-1036
SDUS5AB-002G
SDUS5AJ-002G
SDUS5EB-002G
SDUS5EJ-002G
SDUS5FB-002G
SDUS5FB-002G-1036
SDUS5FJ-002G
SDUS5AB-004G-1036
SDUS5FB-004G
SDUS5FJ-004G
SDUS5AB-004G
SDUS5AB-004G-1035
SDUS5AJ-004G
SDUS5EB-004G
SDUS5EJ-004G
SDUS5AB-008G
SDUS5FB-008G
SDUS5FJ-008G
SDUS5AB-008G-1035
SDUS5AJ-008G
SDUS5EB-008G
SDUS5EJ-008G
SDUS5AJ-016G
SDUS5EJ-016G
SDUS5FJ-016G
1GB
1GB
1GB
1GB
2GB
2GB
2GB
2GB
2GB
2GB
2GB
4GB
4GB
4GB
4GB
4GB
4GB
4GB
4GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
16GB
16GB
16GB
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes. Some of the listed
capacity is used for formatting and other functions, and thus is not available for data storage.
© 2008 SanDisk® Corporation
16
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
SanDisk uSSD 5000
Product Manual
Disclaimer of Liability
SanDisk Corporation Policy
SanDisk Corporation general policy does not recommend the use of its products in life
support applications wherein a failure or malfunction of the product may directly
threaten life or injury.
Accordingly, in any use of products in life support systems or other applications where
failure could cause damage, injury or loss of life, the products should only be
incorporated in systems designed with appropriate redundancy, fault tolerant or back-
up features.
SanDisk shall not be liable for any loss, injury or damage caused by use of the
Products in any of the following applications:
Special applications such as military related equipment, nuclear reactor control,
and aerospace
Control devices for automotive vehicles, train, ship and traffic equipment
Safety system for disaster prevention and crime prevention
Medical-related equipment including medical measurement device
© 2008 SanDisk® Corporation
17
October 2008, Document no. 80-36-03353
Download from Www.Somanuals.com. All Manuals Search And Download.
|