WF410*
Washer
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
1
2010-04-29 ¿ÀÈÄ 3:55:45
10.Pedestal with storage drawer (Model No: WE357A7P/E/W/R)
An optional 15in.(38.1cm) pedestal is available to raise the washer for easier loading and
unloading.
It also offers a built-in storage drawer that can hold a 100oz.(6.25 lb) bottle of detergent.
11.Stacking (Model No: SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)
Samsung washer and dryer can be stacked to maximize usable space. An optional stacking
kit is available for purchase from your Samsung retailer.
<Pedestal with Storage Drawer>
<Stacking>
features of your new VRT™ washer _3
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
3
2010-04-29 ¿ÀÈÄ 3:55:45
safety information
Congratulations on your new Samsung washer. This manual contains important
information on the installation, use and care of your appliance. Please take time to
read this manual to take full advantage of your washer’s many benefits and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
Hazards or unsafe practices that may result in severe personal injury
or death.
WARNING
CAUTION
CAUTION
Hazards or unsafe practices that may result in minor personal injury or
property damage.
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
SAVE THESE INSTRUCTIONS
4_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
4
2010-04-29 ¿ÀÈÄ 3:55:47
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, follow basic precautions, including the following:
WARNING
1. Read all instructions before using the appliance.
2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in,
or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances
as they give off vapors that could ignite or explode.
3. Do not allow children to play on or in the appliance. Close supervision of children is
necessary when the appliance is used near children.
4. Before the appliance is removed from service or discarded, remove the door to the
washing or drying compartment.
5. Do not reach into the appliance if the drum is moving.
6. Do not install or store this appliance where it will be exposed to the weather.
7. Do not tamper with controls.
8. Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in the user-maintenance instructions or in published user-
repair instructions that you understand and have the skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances
to the wash water. These substances give off vapors that could ignite or explode.
10.Under certain conditions, hydrogen gas may be produced in a hot water system
that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If
the hot water system has not been used for such a period, before using a washer or
combination washer-dryer, turn on all hot water faucets and let the water flow from
each for several minutes. This will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
SAVE THESE INSTRUCTIONS
safety information _5
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
5
2010-04-29 ¿ÀÈÄ 3:55:47
safety information
WARNING SEVERE WARNING SIGNS FOR INSTALLATION
Plug the power cord into an AC 120V/60Hz/15A wall socket or higher and use the socket
for this appliance only. In addition, do not use an extension cord.
-
Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
-
-
Do not use an electric transformer. It may result in electric shock or fire.
Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failing to do so may result in electric shock or fire.
The installation of this appliance must be performed by a qualified technician or service
company.
-
Failing to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
-
-
Unplug the power plug and clean it with a dry cloth.
Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
-
If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
-
-
This may result in electric shock, fire, an explosion, or problems with the product
Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where gas may leak.
-
This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug,
damaged power cord or loose wall socket.
-
This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
-
This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
-
-
Unplug the power plug by holding the plug.
Failing to do so may result in electric shock or fire.
When the power plug or power cord is damaged, contact your nearest service center.
6_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
6
2010-04-29 ¿ÀÈÄ 3:55:47
CAUTION SIGNS FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
-
Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
Failing to do so may result in abnormal vibrations, noise, or problems with the product.
-
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
-
Failing to do so may result in electric shock or fire.
WARNING SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, cut the power immediately and contact your nearest service
center.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service center.
-
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
-
-
Do not use a ventilating fan.
A spark may result in an explosion or fire.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
-
This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
-
Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
-
Opening the door by force may result in damage to the product or injury.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
Do not insert your hand under the washer.
-
This may result in injury.
safety information _7
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
7
2010-04-29 ¿ÀÈÄ 3:55:47
safety information
Do not touch the power plug with wet hands.
This may result in electric shock.
-
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
-
Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
-
If a child places a bag over its head, it may result in suffocation.
Do not let children or infirm persons use this washer unsupervised.
Failing to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
This may result in injury.
-
-
Do not attempt to repair, disassemble, or modify the appliance yourself.
-
-
Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
When repairing or reinstalling the appliance is required, contact your nearest service
center.
-
Failing to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug
and contact your nearest service center.
-
Failing to do so may result in electric shock or fire.
When the water supply hose comes loose from the faucet and floods the appliance, unplug
the power plug.
-
Failing to do so may result in electric shock or fire.
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
-
Failing to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
When the glass is broken, it may result in injury.
-
After a water supply failure or when reconnecting the water supply hose, open the faucet
slowly.
Open the faucet slowly after a long period of non-use.
-
The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
-
If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
8_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
8
2010-04-29 ¿ÀÈÄ 3:55:47
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
-
If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the faucet is turned off when the washer is not being used.
-
-
Ensure that the screw on the water supply hose connector is properly tightened.
Failing to do so may result in property damage or injury.
Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).
If the door is not closed completely, it may result in water leakage.
-
Open the faucet and check if the water supply hose connector is firmly tightened and that
there is no water leaking before using the product.
-
If the screws or the water supply hose connector are loose, it may result in water
leakage.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
-
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
-
-
As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
This may result in injury due to a malfunction.
-
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
-
This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*).
-
-
Do not wash thick, hard mats even if the washer mark is on the care label.
This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
*
Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
This may result in electric shock or injury due to water leakage.
-
Do not touch the inside of the tub during or just after drying as it is hot.
This may result in burns.
-
Do not insert your hand into the detergent box after opening it.
-
This may result in injury as your hand may be caught by the detergent input device.
safety information _9
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd
9
2010-04-29 ¿ÀÈÄ 3:55:47
safety information
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
-
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
This may result in electric shock or injury.
-
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
-
This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
-
-
This may cause the tub to rust.
If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
-
This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
This may result in problems with the washer.
-
Do not use natural hand-washing soap for the washer.
-
If it hardens and accumulates inside the washer, it may result in problems with the
product, discoloration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
-
-
Place socks and brassieres into the washing net and wash them with the other laundry.
Failing to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
If it accumulates inside the washer, it may result in water leakage.
-
Do not wash throw rug or doormat.
-
If you wash throw rug or doormat, the sand will accumulate inside the washer. It may
result in error such as not draining.
WARNING SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
-
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
Failing to do so may result in electric shock or fire.
-
10_ safety information
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 10
2010-04-29 ¿ÀÈÄ 3:55:48
contents
12 Checking the parts
13 Meeting installation requirements
SETTING UP YOUR WASHER
13
13
13
14
14
14
14
Electrical supply
Grounding
Water
Drain facility
Flooring
12
Location consideration
Alcove or closet installation
14 Installing your washer
17 Loading your washer
17 Getting started
WASHING A LOAD OF LAUNDRY
18 Overview of the control panel
17
20
Child Lock
20
21
Garment+
Washing clothes using the cycle selector
22 Detergent use
22 Features
24 Cleaning the exterior
24 Cleaning the interior
24 Cleaning the dispensers
25 Storing your washer
CLEANING AND MAINTAINING YOUR
WASHER
24
25 Cleaning the debris filter
26 Cleaning the door seal/bellow
26 Preserving the top cover and the front frame
27 Pure Cycle
28 Check these points if your washer…
30 Information codes
TROUBLESHOOTING AND
INFORMATION2COD8ES
32 Fabric care chart
33 Cycle chart
APPENDIX
34 Helping the environment
34 Declaration of conformity
34 Specification
32
35 Warranty
WARRANTY
35
contents _11
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 11
2010-04-29 ¿ÀÈÄ 3:55:48
setting up your washer
CHECKING THE PARTS
Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items
shown below. If your washer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG(726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.
Keep all packaging materials well out of the reach of children, as packaging materials can be
dangerous to children.
WARNING
-
If a child places a bag over its head, it may result in suffocation.
Cold water supply
hose
Hot water supply hose
Detergent drawer
Control panel
Power cord
Drain hose
Door
Tub
Debris filter
Drain tube
Filter cover
Adjustable legs
Parts supplied
( use for the Upper Bolt Hole )
Wrench
Bolt hole covers
Water supply hoses
Hose guide
Plastic zip hose tie
Manual book
Tools needed
Pliers
Flat screwdriver
12_ setting up your new washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 12
2010-04-29 ¿ÀÈÄ 3:55:49
MEETING INSTALLATION REQUIREMENTS
Electrical supply
•
•
•
120 Volt 60 Hz 15 AMP fuse or circuit breaker
Individual branch circuit serving only your washer is recommended.
Your washer is equipped with a power cord.
Never use an extension cord.
WARNING
Grounding
ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.
This appliance must be grounded. In the event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a power cord having a three-prong grounding plug for use in a
properly installed and grounded outlet.
Improper connection of the equipment-grounding conductor can result in a risk of electrical
WARNING shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
appliance is properly grounded. Do not modify the plug provided with the appliance – if it
does not fit the outlet, have a proper outlet installed by a qualified electrician.
IMPORTANT SAFETY PRECAUTIONS
•
To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and
grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.
70 Latest Revision and local codes and ordinances. It is the personal responsibility of the
appliance owner to provide adequate electrical service for this appliance.
Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.
WARNING
Water
To correctly fill your washer in the proper amount of time, water pressure of 20-116psi(137-
800kPa) is required.
Water pressure less than 20 psi(137kPa) may cause water valve failure, or may not allow the
water valve to shut off completely. Or, it may extend the fill time beyond what your washer
controls allow, resulting in your washer turning off. A time limit is built into the controls in the
event of an internal hose becoming loose and flooding your home.
The water faucets must be within 4 ft.(122cm) of the back of your washer for the inlet hoses
provided with your washer.
Accessory inlet hoses are available in various lengths up to 10 ft.(305cm) for faucets that
are further away from the back of your washer.
To avoid the possibility of water damage:
•
•
•
Have water faucets easily accessible.
Turn off faucets when the washer is not in use.
Periodically check that there is no leakage from the water inlet hose fittings.
Check all connections at the water valve and faucet for leaks.
WARNING
setting up your new washing machine _13
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 13
2010-04-29 ¿ÀÈÄ 3:55:50
setting up your washer
Drain facility
The recommended height of the standpipe is 18 in (46 cm). The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached at the factory.
Flooring
For best performance, your washer must be installed on a solidly constructed floor. Wood floor
may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting
and soft tile surfaces are contributing factors in vibration and may cause your washer to move
slightly during the spin cycle.
Never install your washer on a platform or weakly supported structure.
CAUTION
Location consideration
Do not install your washer in areas where water may freeze, since your washer will always
maintain some water in its water valve, pump, and hose areas. This can cause damage the
pump, hoses and other components.
Alcove or closet installation
MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:
Sides – 1 In.(2.5 cm)
Rear – 4 In.(10.2 cm)
Top – 17 In.(43.2 cm)
Closet Front – 2 In.(5.1 cm)
If the washer and dryer are installed together, the closet front must have at least 72 in²(465 cm²)
of an unobstructed air opening. Your washer alone does not require a specific air opening.
INSTALLING YOUR WASHER
STEP 1
Selecting a location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Will not be freezing (below 32 ˚F or 0 ˚C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn’t stand on its power cord.
14_ setting up your new washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 14
2010-04-29 ¿ÀÈÄ 3:55:50
STEP 2
Removing the shipping bolts
Before using your washer, you must remove the four
shipping bolts from the back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Slide the bolt and spacer up and remove the bolt with
the spacer through the hole in the rear wall of your
washer. Repeat for each bolt.
3. Fill the holes with the supplied bolt hole covers.
4. Keep the shipping bolts and spacers for future use.
STEP 3
Installing your washer
Hose
Guide
1. Place the drain hose in the drain facility.
Be sure an airtight connection is NOT
made between the drain hose and the
standpipe.
The standpipe must be at least 18in.(46
cm) high.
Caution must always be exercised to
avoid collapsing or damaging the drain
hose. For best results, the drain hose
should not be restricted in any way – by
elbows, couplings, or excessive lengths.
For situations where the drain hose
cannot be conveniently elevated to at
least 18in.(46 cm), the drain hose must
be supported.
Laundry tub
Stand pipe
Hose
retainer
96” Max
18” Min
96” Max
18” Min
Tie
strap
2. Before connect the inlet hoses to water faucets, check to
ensure a washer is inside coupling.
Coupling
Rubber
Washer
setting up your new washing machine _15
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 15
2010-04-29 ¿ÀÈÄ 3:55:51
setting up your washer
3. Check the inlet hose to ensure a washer is inside each fill hose.
Thread the inlet hoses to the HOT and COLD faucet
connections.
Cold
Hot
On the other end of the hose, check for one rubber washer per
hose and install each fill hose to the water valve. Make sure the
hose with the Hot printed line is attached to the HOT faucet.
Tighten by hand until snug, then two-thirds of a turn with pliers.
For correct water use, connect both HOT and COLD water
valves. If either or both are not connected, an “nF” (no fill) error
can occur.
4. Turn on the HOT and COLD water supply and check all
Cold printed
Hot printed
connections at the water valve and the faucet for leaks.
5. Plug the power cord into a 3-prong, well grounded 120 volt
60 Hz approved electrical outlet protected by a 15-amp
fuse or comparable circuit breaker.
Your washer is grounded through the third prong of the
power cord when plugged into a three-prong grounded
receptacle.
6. Slide your washer into position.
7. Level your washer by turning the leveling legs in or out as
necessary by hand or by using the wrench included with
your washer.
Locking
Nut
When your washer is level, tighten the locking nuts using
the wrench or (-) flathead screwdriver.
Levelling
Leg
Your washer must be leveled on all four sides. A
carpenter’s level should be used on all four corners of
your washer. It’s the best to recheck after the first dozen
washes.
Avoid damage to the legs. Do not move
the washer unless the locking-nuts are
fastened to the bottom of the washer.
16_ setting up your new washing machine
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 16
2010-04-29 ¿ÀÈÄ 3:55:52
washing a load of laundry
LOADING YOUR WASHER
•
•
You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.
Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or
wrinkling of the load.
•
•
Wash delicate items such as bras, hosiery, and other lingerie in the delicates cycle with similar
lightweight items.
When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a pillow,
stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin
performance.
During the spin cycle, the washer may add additional water to redistribute the excessive imbalance
inside the tub.
•
•
When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.
To add a forgotten item:
1. Press the Power button.
2. Press the Start/Pause button.
3. Wait for the door lock light to go out (Immediately).
4. Add the item, close the door, and press the Start/Pause button.
The door safety state continues for 15 seconds and the cycle is restarted.
To ensure thorough cleaning, add items within five minutes of starting the wash cycle.
GETTING STARTED
1. Load your washer.
2. Close the door.
Push the laundry into the tub completely to prevent the laundry from being caught in the door or from
falling out of the tub.
CAUTION
3. Press the Power button.
4. Add detergent and additives to the dispenser (See page 22~24).
5. Select the appropriate cycle and options for the load (See page 18~19).
6. Press the Start/Pause button.
7. The Wash Indicator will illuminate.
8. The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
• When the cycle is complete, the door lock light will go out and “End” will appear in the display.
• DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see
“Loading your washer” section (See page 17).
• When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle
continues.
• Pressing Power button cancels the cycle and stops your washer.
•
The Wash, Rinse and Spin indicators will illuminate during those portions of the cycle.
washing a load of laundry _17
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 17
2010-04-29 ¿ÀÈÄ 3:55:53
washing a load of laundry
OVERVIEW OF THE CONTROL PANEL
1
2
3
4
5
6
7
8
9
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
To minimize wrinkling of your laundry, select the Perm Press cycle.
Normal - For most fabrics including cottons, linens, and normally soiled garments.
Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.
Whites - For white fabrics with or without bleach.
Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally
soiled garments.
Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to
150°F(65.6°C) to eliminate bacteria.
If Pause is selected during the heating portion of the Sanitize cycle, your
washer door will remain locked for your safety.
Bedding - For heavily soiled, colorfast garments, this cycle provides high
washing temperature and is efficient in cleaning stains.
Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only
fabrics. For best results, use liquid detergent.
Hand Wash - For handwashable, special care garments.
Wool - For machine-washable wool. Loads should be under 8 pounds.
1
Cycle Selector
•
The Wool cycle washes laundry by moving the wash drum horizontally to
maintain the characteristics of the wool fibers and to prevent damaging
the cloth. It then stops for a while to allow the laundry to soak in the
water. This stop operation is not a problem.
•
It is recommended using a neutral detergent to prevent damage to the
cloth and to improve the washing results.
The Wool cycle of this machine has been approved by
Woolmark for the washing of machine washable Woolmark
products provided that the products are washed according
to the instructions on the garment label and those issued by
the manufacturer of this washer, M1002(Woolmark approval
number).
Quick Wash - For lightly soiled garments needed quickly.
Rinse + Spin - Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Spin Only - Provides a spin to remove more water.
Digital graphic
display
2
Displays the remaining cycle time, all cycle information, and error messages.
18_ washing a load of laundry
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 18
2010-04-29 ¿ÀÈÄ 3:55:54
Press these buttons to select different cycle options.
Pre Wash - To use this feature add detergent to the pre wash section of the
detergent compartment. When turned on, the washer fills with cold water and
detergent, tumbles, then drains and advances to the selected wash cycle.
Some cycles cannot be selected with with this option (See page 33).
You cannot select the prewash option in the Delicate, Wool, Quick
Wash, Hand Wash, Rinse+Spin, and Spin Only cycles.
Wash Option
selection
buttons
3
Extra Wash - Add additional time to the wash for better stain removal.
Extended Spin - Add additional time to remove more water from loads.
Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be started.
Pure Cycle - Use for drum cleaning. It cleanses drum of dirt and bacteria.
Regular use (after every 40 washes) is recommended. No detergent or bleach
needed (see pages 27).
Press the button repeatedly to cycle through the different water temperature options.
Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.
Hot/Cold - Whites and heavily soiled, colorfast items.
Temperature
selection button
Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will
be warm.
4
The other rinses will be cold to conserve energy.
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.
Cold/Cold - Brightly colored, very lightly soiled items.
Press the button repeatedly to cycle through the different spin speed options.
Extra High - Removes more water from loads during spin.
To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use
the Extra High spin option for these loads, nor overload your washer.
High - Use for underwear, t-shirts, jeans and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.
Low - Use for delicate items needing a slow spin speed.
Spin selection
button
5
No Spin - Drains your washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to select the soil level/washing time.
(Heavy Normal Light)
Heavy - For heavily soiled loads.
Normal - For moderately soiled loads. This setting is best for most loads.
Soil Level
selection button
6
7
Light - For lightly soiled loads.
Press the button to increase or decrease the end of cycle signal volume or
turn off the signal.
(Off Softer Louder)
Signal selection
button
Start/Pause
selection button
8
9
Press to pause and restart programs.
Press once to turn your washer on, press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
Power button
washing a load of laundry _19
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 19
2010-04-29 ¿ÀÈÄ 3:55:54
washing a load of laundry
Child Lock
This function prevents children from playing with your washer.
Activating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.
•
•
If the Child Lock function is activated, the door is locked and the “Child Lock [ ]” lamp is lit.
If the Start/Pause button is pressed after the Child Lock function is activated, none of the
buttons will work except for the Power button.
•
If a button is pressed when the buttons are locked, the “Child Lock [ ]” lamp blinks.
Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child Lock function, you can pause the
Child Lock operation for 1 minute by pressing and holding both the Spin and Soil Level buttons
simultaneously for approximately 3 seconds.
•
If Child Lock mode is paused temporarily, the door lock is released for 1 minute for user
convenience. During this period, the “Child Lock [ ]” lamp blinks.
•
•
If the door is opened after the minute is over, an alarm sounds for up to 2 minutes.
If the door is closed within the 2 minutes, the door is locked and the Child Lock function is
reactivated. If the door is closed after the 2 minutes, the door will not be locked automatically
and no alarm will be heard.
Deactivating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6
seconds.
•
If the Child Lock function is deactivated, the door is unlocked and the “Child Lock [ ]” is
turned off.
•
Child Lock is a function to prevent children or the infirm from accidently operating the
washer and injuring themselves.
WARNING
CAUTION
•
•
If a child enters the washing machine, the child may become trapped and suffocate.
Once the Child Lock function is activated, the Child Lock function continuous working
even if the power is turned off.
•
Opening the door by force can result in injury due to damage to the product.
To add laundry when the Child Lock function is activated, you have to first pause or
deactivate the Child Lock function.
If you want to open the door of the washing machine when the Child Lock function is
activated:
•
•
Pause or deactivate the Child Lock function.
Turn the washing machine off and then on again.
Garment+
You can add or take out laundry items even after the wash has started, as long as the
“Garment+
” light is turned on. Pressing the Start/Pause button unlocks the door, unless the
water is too hot or if there is too much water in your washer. If you are able to unlock the door
and wish to continue the wash cycle, close the door and press the Start/Pause button.
20_ washing a load of laundry
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 20
2010-04-29 ¿ÀÈÄ 3:55:54
Washing clothes using the cycle selector
Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic
control system. When you select a wash program, the machine will set the correct temperature,
washing time, and washing speed.
1. Almost no customers will have the washer hooked up via the sink’s tap.
2. Press the Power button.
3. Open the door.
4. Load the articles of clothing one at a time loosely into the tub, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Normal, Perm Press, Sanitize, Bedding,
Whites, and Heavy Duty cycles. It is only necessary if your clothing is heavily soiled(See
page 33).
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate Option button.
9. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
To unlock the door when the “Garment+” light is turned on, press the Start/Pause button.
1. Within 5 minutes of starting a wash, you can still add/remove laundry items to the wash.
2. Press the Start/Pause button to unlock the door.
3. The door cannot be opened when the water is too HOT or the water level is too HIGH.
4. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
When the cycle is complete, “End” is displayed and the power remains on.
The power is turned off in the following two cases.
1. When the Power button is pressed.
2. If the door is opened when “End” is displayed.
washing a load of laundry _21
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 21
2010-04-29 ¿ÀÈÄ 3:55:54
washing a load of laundry
DETERGENT USE
Your washer is designed to use high efficiency (HE) detergents.
•
For best cleaning results, use a high efficiency detergents such as Tide
HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain
suds suppressors that reduce or eliminate suds. When fewer suds are
produced, the load tumbles more efficiently and cleaning is maximized.
Regular detergent is not recommended. Please use HE detergents
only.
CAUTION
Reducing the amount of detergent may reduce the cleaning quality. It
is important to pre–treat stains, sort carefully by color and soil level, and avoid overloading.
*
Brand names are trademarks of their respective manufacturers.
FEATURES
Automatic dispenser
Detergent Liquid
Your Washer has separate compartments for dispensing
detergent and color-safe bleach, chlorine bleach, and fabric
softener. All laundry additives are added to their respective
compartments before starting your Washer.
The automatic dispenser MUST ALWAYS be in place before
starting your Washer.
Pre wash
compartment
DO NOT open the automatic dispenser when your washer is
running.
To use:
1. Never exceed the manufacturer’s recommendations when
adding detergent.
2. This compartment holds liquid detergent for the main wash
cycle, which is added to the load at beginning of cycle.
When using powdered detergent, remove the detergent
liquid from the compartment. Powdered detergent will not
dispense with detergent liquid.
Detergent compartment
1. Pour the recommended amount of laundry detergent directly into the detergent compartment
before starting your washer.
2. If color-safe bleach is to be used, it should be added with detergent to the detergent
compartment.
When adding color-safe bleach with detergent, it is best if both laundry products are in the
same form – granular or liquid.
22_ washing a load of laundry
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 22
2010-04-29 ¿ÀÈÄ 3:55:55
Pre Wash compartment
When using the Pre Wash option, detergent should be added to both the Pre Wash
compartment and the detergent compartment. The detergent will automatically be dispensed
during Pre Wash.
•
If high efficiency (HE) detergent is used, add 1/3 of the recommended amount to the Pre
Wash compartment and 2/3 of the recommended amount to the detergent compartment.
Bleach compartment
(Liquid chlorine bleach only)
Fabric Softener
compartment
1. Add chlorine bleach to the bleach compartment.
DO NOT exceed the MAX FILL line.
2. Avoid splashing or over–filling the compartment.
3. Your washer automatically dispenses bleach into the tub at
the appropriate time.
Bleach
compartment
4. The dispenser automatically dilutes liquid chlorine bleach
before it reaches the wash load.
•
Never pour undiluted liquid chlorine bleach directly onto
the load or into the tub. It is a powerful chemical and
can cause fabric damage, such as weakening of the
fibers or color loss, if not used properly.
•
If you prefer to use color–safe, non–chlorine bleach,
add it to the appropriate detergent compartment.
DO NOT pour color–safe bleach into the Bleach
compartment.
Fabric softener compartment
1. Pour the recommended amount of liquid fabric softener into the softener compartment.
For smaller loads, use less than one capful.
2. Fabric softener should be diluted with water until it reaches MAX FILL in the compartment.
3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse
cycle.
•
•
Use the softener compartment ONLY for liquid fabric softeners.
DO NOT use a Downy Ball* in the Fabric softener compartment of this washer. It will not
add fabric softener at the appropriate time.
Use the detergent compartment.
*
Brand names are trademarks of their respective manufacturers.
washing a load of laundry _23
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 23
2010-04-29 ¿ÀÈÄ 3:55:55
cleaning and maintaining your
washer
Keeping your washer clean improves its performance, wards off unnecessary
repairs, and lengthens its life.
CLEANING THE EXTERIOR
Turn off the water faucets after finishing the day’s washing.
This will shut off the water supply to your washer and prevent the unlikely possibility of damage from
escaping water. Leave the door open to allow the inside of your washer to dry out.
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended:
Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray
cleaners directly on the panel.
Cabinet – Clean with soap and water.
CLEANING THE INTERIOR
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial
residue that may remain in your washer as a result of washing clothes.
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent
stains on your washer or laundry.
Hard water deposits may be removed, if needed. Use a cleaner labeled “washer safe”.
CLEANING THE DISPENSERS
The automatic dispenser may need to be cleaned periodically due to
laundry additive buildup.
1. Pull out the detergent liquid from detergent compartment.
2. Remove the siphon cap from the fabric softener and bleach
compartments.
3. Wash all of the parts under running water.
4. Clean the dispenser recess with a soft brush.
5. Reinsert the siphon cap and push it firmly into place.
6. Push the dispenser back into place.
7. Run a Rinse+Spin cycle without any load in your washer.
Siphon cap
24_ cleaning and maintaining your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 24
2010-04-29 ¿ÀÈÄ 3:55:56
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage.
Prepare your washer for storage as follows:
•
Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the
cycle without a load.
•
•
Turn the water faucets off and disconnect the inlet hoses.
Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside
the tumbler.
•
If your washer has been stored in below–freezing temperatures, allow time for any leftover water in your
washer to thaw out before use.
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is
displayed.
1. Open the filter cover by pressing and pulling the handle
Filter cover
of the filter cover with your finger.
2. Unscrew the drain cap by turning it
counterclockwise.
Step 1
Step 2
3. Hold the cap on the end of the drain tube
and slowly pull it out about 6 in.(15 cm) and
drain off all the water.
Drain cap
4. Remove the debris filter cap.
Debris filter cap
cleaning and maintaining your washer _25
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 25
2010-04-29 ¿ÀÈÄ 3:55:57
cleaning and maintaining your
washer
5. Wash any dirt or other material from the debris filter. Make sure
the drain pump propeller behind the debris filter is not blocked.
6. To assemble the filter cap, align the projected part of the filter cap
to your 12 o’clock (on an imaginary clock) and turn it clockwise.
7. Replace the debris filter cap.
8. Replace the filter cover.
CLEANING THE DOOR SEAL/BELLOW
1. Open the washer door and remove any clothing or items from the washer.
2. Inspect the gray colored seal/bellow between the door
opening and the basket for stained areas. Pull back the
seal/bellow to inspect all areas under the seal/bellow and to
check for foreign objects.
seal/bellow
3. If stained areas are found, wipe down these areas of the seal/bellow, using the procedure
that follows.
a) Mix a dilute solution, using ¾ cup (177 mL) of liquid chlorine bleach, and 1 gal. (3.8 L) of
warm tap water.
b) Wipe the seal/bellow area with the dilute solution, using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door
open.
IMPORTANT:
•
•
Wear rubber gloves when cleaning for prolonged periods.
Refer to the bleach manufacturer’s instructions for proper use.
PRESERVING THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washer. Keep them on the purchased
pedestal or in a separate storage box.
This may scratch or damage the top cover. And there are dangers for drop.
CAUTION
Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Therefore,
avoid scratching or damaging the surface when using the washer.
26_ cleaning and maintaining your washer
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 26
2010-04-29 ¿ÀÈÄ 3:55:58
PURE CYCLE
This course is a self-cleaning course that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle button.
•
You can only use the Delay Start
function.
3. Press the Start/Pause button.
•
If you press the Start/Pause button,
the Pure Cycle course begins.
•
•
Using the Pure Cycle course, you can clean the drum without using a cleansing agent.
Never use the Pure Cycle course when laundry is in the washing machine. This may result in
damage to the texture or a problem with the washing machine.
CAUTION
•
If you want to use drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer.
The Pure Cycle Auto Alarm Function
•
•
•
If the “Pure Cycle” button is lit after a wash, it indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the washing machine, turn the power on, and clean the
drum by performing the Pure Cycle course.
If you do not perform the Pure Cycle course, the lamp of the “Pure Cycle” button is turned
off. However, the “Pure Cycle” button is lit again after two washes are performed. However
this will not result in a problem with the washing machine.
Although generally, the Pure Cycle Auto Alarm appears once a month or so, the frequency
may differ depending on the number of times the washing machine is used
cleaning and maintaining your washer _27
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 27
2010-04-29 ¿ÀÈÄ 3:55:58
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHER…
PROBLEM
SOLUTION
Will not start..
•
•
•
•
•
•
Make sure the door is firmly closed.
Make sure your washer is plugged in.
Make sure the water source faucets are open.
Make sure to press the Start/Pause button to start your washer.
Make sure the Child Lock is not activated (page 20).
Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
•
Check the fuse or reset the circuit breaker.
Has no water or not enough
water..
•
•
•
•
Turn both faucets on fully.
Make sure the door is tightly closed.
Straighten the water inlet hoses.
Disconnect hoses and clean screens. Hose filter screens may be
clogged.
•
Open and close the door, then press the Start/Pause button.
Has detergent remains in
the automatic dispenser
after the wash cycle is
complete.
•
•
Make sure your washer is running with sufficient water pressure.
Make sure the Detergent Selector dial is in the upper position when
using granular detergent.
Vibrates or is too noisy.
•
Make sure your washer is set on a level surface. If the surface is not
level, adjust your washer feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washer is not touching any other object.
Make sure the laundry load is balanced.
•
•
•
Stops
•
•
•
Plug the power cord into a live electrical outlet.
Check the fuse or reset the circuit breaker.
Close the door and press the Start/Pause button to start your
washer.
For your safety, your washer will not tumble or spin unless the door is
closed.
•
•
•
Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
There may be a pause or soak period in the cycle. Wait briefly and it
may start.
Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
28_ troubleshooting and information codes
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 28
2010-04-29 ¿ÀÈÄ 3:55:58
PROBLEM
SOLUTION
Fills with the wrong
temperature water.
•
•
•
Turn both faucets on fully.
Make sure the temperature selection is correct.
Make sure the hoses are connected to the correct faucets.
Flush water lines.
•
Check the water heater. It should be set to deliver a minimum
120°F(49°C) hot water at the tap. Also check the water heater
capacity and recovery rate.
•
•
Disconnect the hoses and clean the screens. The hose filter screens
may be plugged.
As your washer is filling, the water temperature may change as
the automatic temperature control feature checks incoming water
temperature. This is normal.
•
While your washer is filling, you may notice just hot and/or just
cold water going through the dispenser when cold or warm
wash temperatures are selected. This is a normal function of the
automatic temperature control feature as your washer determines the
temperature of the water.
Door locked or will not
open.
•
•
Press the Start/Pause button to stop your washer.
Your washer door will remain locked during the heating portion of the
Sanitize cycle.
•
It may take a few moments for the door lock mechanism to
disengage.
Does not drain and/or spin.
•
•
Check the fuse or reset the circuit breaker.
Straighten the drain hoses. Eliminate kinked hoses. If there is a drain
restriction, call for service.
•
Close the door and press the Start/Pause button. For your safety,
your washer will not tumble or spin unless the door is closed.
Load is too wet at the end
of the cycle.
•
•
•
Use the High or Extra High spin speed.
Use high efficiency detergent to reduce over–sudsing.
Load is too small. Very small loads (one or two items) may become
unbalanced and not spin out completely.
Leaks water.
•
•
•
Make sure the door is firmly closed.
Make sure all hose connections are tight.
Make sure the end of the drain hose is correctly inserted and secured
to the drainage system.
•
•
Avoid overloading.
Use high efficiency detergent to prevent over–sudsing.
Has excessive suds.
•
•
Use high efficiency detergent to prevent over-sudsing.
Reduce the detergent amount for soft water, small or lightly soiled
loads.
•
Non-HE detergent is NOT recommended.
troubleshooting and information codes _29
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 29
2010-04-29 ¿ÀÈÄ 3:55:58
troubleshooting and
information codes
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your washer.
CODE SYMBOL MEANING
SOLUTION
Unbalanced load prevented your
washer from spinning.
Redistribute the load, press the Start/Pause
button.
dc
dL
Door is unlocked when washer is
running.
Press the Power button to turn off your washer,
then restart the cycle. If the code reappears, call
for service.
Door is open when washer is
running.
Close the door tightly and restart the cycle.
If the code reappears, call for service.
dS
FL
Your washer failed to lock the
door.
Close the door tightly and restart the cycle.
If the code reappears, call for service.
Water temperature control
problem.
(Heater control problem)
Call for service.
Hr
LE
Your washer has tried to fill but
has not reached the proper water
level.
Call for service.
The door will not unlock.
Make sure the door is firmly closed.
Press the Power button to turn off your washer,
then turn it on again. If the code reappears, call
for service.
LO
Your washer is not draining.
It can also mean that the unit
Before calling for service, check the following.
Clean the filter (See page 25).
senses a small clog while draining. or
1. Turn off the unit for 10 seconds and then turn
nd
nF
it on again.
2. Select the Spin Only cycle.
3. Press the Start/Pause to drain the water.
If it still does not drain, call for service.
Your washer has tried to fill but
was unsuccessful.
Make sure the water faucets are open all the
way. Check for kinked hoses.
Check the inlet screens on the fill hoses.
The hot/cold water hose
connection is not correct.
Please connect the hot/cold water hose
connection correctly.
nF1
Sr
Problem with control.
Call for service.
Call for service
A fault is detected in the water
level sensor.
OE
E2
tE
Jammed key.
Call for service
Temperature sensor problem.
Restart the cycle.
If the code reappears, call for service.
Motor problem.
Restart the cycle.
If the code reappears, call for service.
3E
30_ troubleshooting and information codes
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 30
2010-04-29 ¿ÀÈÄ 3:55:58
CODE SYMBOL MEANING
SOLUTION
High/Low voltage detected.
Restart the cycle.
If the code reappears, call for service.
2E
7E
AE
Ag+ Kit problem
Call for service
Call for service
Communication error between
SUB PBA and MAIN PBA
SF1
SF2
SF3
System error
Call for service
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, “End”
and “SUdS” codes will blink in
turn.
To prevent it, cut down on detergents.
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
troubleshooting and information codes _31
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 31
2010-04-29 ¿ÀÈÄ 3:55:58
appendix
FABRIC CARE CHART
The following symbols provide garment care direction. The clothing care labels include symbols for washing,
bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency
among garment manufacturers of domestic and imported items. Follow care label directions to maximize
garment life and reduce laundering problems.
Warning Symbols for
Wash Cycle
Normal
Special Instructions
Line Dry/ Hang to Dry
Laundering
Do Not Wash
Permanent Press /
Wrinkle Resistant /
Wrinkle Control
Drip Dry
Dry Flat
Do Not Wring
Gentle/Delicates
Hand Wash
Do Not Bleach
Heat Setting
Do Not Tumble Dry
No Steam (added to
iron)
Water Temperature**
High
Hot
Medium
Low
Do Not Iron
Warm
Cold
Dryclean
Any Heat
Dry Clean
Bleach
No Heat/Air
Do Not Dry Clean
Any Bleach (when
needed)
Iron-Dry or Steam
Temperatures
Line Dry/ Hang to Dry
Drip Dry
Only Non-Chlorine
(color-safe) Bleach (when
needed)
High
Tumble Dry Cycle
Medium
Low
Dry Flat
For machine-washable
wool. Loads should be
under 8 pounds.
Normal
Permanent Press/
Wrinkle Resistant/
Wrinkle Control
Gentle/ Delicates
** The dot symbols represent appropriate wash water temperatures for various items. The temperature
range for Hot is 105-125 °F(41-52 °C), for Warm 85-105 °F(29-41 °C) and for Cold 60-85 °F(16-29
°C). (Wash water temperature must be a minimum of 60 °F(16 °C) for detergent activation and effective
cleaning.) The clothes washer may not ensure these temperatures because the actual water temperatures
entering your washer are dependent on water heater settings and regional water supply temperatures. For
example, cold water entering the home in the northern states during winter may be 40 °F(4 °C) which is
too cold for effective cleaning. The water temperature in this situation will need to be adjusted by selecting
a warm setting, adding some hot water to the MAX FILL line or using your washer’s heating option, if
available.
32_ appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 32
2010-04-29 ¿ÀÈÄ 3:55:59
CYCLE CHART
Use this chart to set the best cycle and option for you laundry.
(
: factory setting, : selectable)
Functions
Spin
Temp
Soil Level
EH/C H/C W/W W/C C/C
EH
H
M
L
NS
H
N
L
Normal
Heavy Duty
Whites
Perm Press
Sanitize
Bedding
Delicates
Hand Wash
Wool
Quick Wash
Rinse + Spin
Spin Only
Options
Display Time
Extended
Spin
Pre Wash
Extra Rinse
Delay Start
Garment+
Child Lock
Normal
Heavy Duty
Whites
58
104
75
Perm Press
Sanitize
52
117
76
Bedding
Delicates
Hand Wash
Wool
45
45
60
Quick Wash
Rinse + Spin
Spin Only
29
19
12
Temp
Spin
Soil Level
H: Heavy
EH/C: Extra Hot/Cold
H/C: Hot/Cold
EH: Extra High
H: High
W/W: Warm/Warm
W/C: Warm/Cold
C/C: Cold/Cold
M: Medium
L: Low
NS: No Spin
N: Normal
L: Light
appendix _33
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 33
2010-04-29 ¿ÀÈÄ 3:55:59
appendix
HELPING THE ENVIRONMENT
•
Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe
local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected
to a power source. Remove the door so that animals and small children cannot get trapped inside the
appliance.
•
•
•
Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program used).
DECLARATION OF CONFORMITY
This appliance complies with UL2157.
SPECIFICATION
TYPE
FRONT LOADING WASHER
Div
In. (cm)
39(99.1)
A. Height-Overall
B. Width
27(68.6)
C. Depth with door open 90°
D. Depth
51.7(131.4)
31.9(81.1)
C
D
DIMENSIONS
A
B
WATER PRESSURE
WEIGHT
20-116 psi(137-800 kPa)
219 Ibs(99 Kg)
900 W
HEATER RATING
Washing
120 V
120 V
120 V
120 V
250 W
1100 W
600 W
80 W
Washing and heating
Spinning
POWER
CONSUMPTION
Draining
SPIN REVOLUTION
WF410*
1200 rpm
34_ appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 34
2010-04-29 ¿ÀÈÄ 3:55:59
warranty
Warranty
SAMSUNG WASHER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) year part and labor
Two (2) years control panel parts
Three (3) years stainless tub parts
Five (5) years motor parts
This limited warranty begins on the original date of purchase, and is valid only on products purchased
and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem
determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized
service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the
warranty period at no charge, subject to availability within the contiguous Canada. In-home service is not
available in all areas.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service
is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized
service center.
SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein,
with new or reconditioned parts or products if found to be defective during the limited warranty period
specified above. All replaced parts and products become the property of SAMSUNG and must be returned
to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90)
days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship
encountered in normal, noncommercial use of this product and shall not apply to the following: damage
that occurs in shipment; delivery and installation; applications and uses for which this product was not
intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,
fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services,
parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical
line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
maintenance and environmental instructions that are covered and prescribed in the instruction book;
product removal and reinstallation; problems caused by pest infestations. This limited warranty does not
cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house
wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant
uninterrupted or error-free operation of the product.
warranty _35
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 35
2010-04-29 ¿ÀÈÄ 3:55:59
warranty
EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS
OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR
PURPOSE.
NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT
TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS
OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY
TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED,
AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,
DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR
PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific rights, and you may also have other rights, which vary from province to
province.
To obtain warranty service, please contact SAMSUNG at:
SAMSUNG ELECTRONICS CANADA INC., CUSTOMER SERVICE 55 STANDISH COURT
MISSISSAUGA, ONTARIO L5R 4B2 CANADA
1-800-SAMSUNG(726-7864)
36_ warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 36
2010-04-29 ¿ÀÈÄ 3:55:59
memo
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 37
2010-04-29 ¿ÀÈÄ 3:55:59
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
CANADA
1-800-SAMSUNG(726-7864)
Code No. DC68-02657F_EN
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_EN.indd 38
2010-04-29 ¿ÀÈÄ 3:55:59
WF410*
Lave-linge
Manuel d’utilisation
Un monde de possibilités
Nous vous remercions d’avoir choisi ce produit
Samsung.
Afin de bénéficier d’un service plus complet, veuillez
enregistrer votre produit à l’adresse suivante :
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
1
2010-04-29 �� 3:54:24
caractéristiques de votre
nouveau lave-linge VRT™
1. VRT™ (Vibration Reduction Technology - Système de réduction
des vibrations)
Ce lave-linge Samsung garantit un fonctionnement ultra-silencieux même à des vitesses
d’essorage élevées, car il est équipé d’un système permettant de réduire considérablement
bruits et vibrations.
2. Très grande capacité
Le lave-linge Samsung très grande capacité permet de laver un jeu de Literie complet,
une couette « King Size » (grande taille) ou 26 serviettes de bain en un seul chargement.
Résultat : vous économisez du temps, de l’argent, de l’eau et de l’électricité.
3. Diamond drum™
Prenez soin de votre linge. Grâce à des trous 36 % plus petits que ceux d’un tambour
traditionnel, le tambour Diamond Drum empêche le linge de dépasser, évitant ainsi qu’il ne
se détériore.
4. Design élégant
Le design élégant de ce lave-linge se fond à merveille dans votre environnement.
5. Écran numérique et molette centrale
La molette vous permet de sélectionner facilement les programmes en l’actionnant dans les
deux sens, et l’écran est très fonctionnel et lisible.
6. Moteur DD (Direct-drive)
La puissance absolue ! Notre moteur inverseur à entraînement direct génère la puissance
directement dans le tambour à partir d’un moteur réversible à vitesse variable. Le moteur
sans courroie à entraînement direct génère une Essorage de 1 200 tr/min pour un cycle de
fonctionnement plus silencieux et plus efficace. Le lave-linge dispose également de moins
de pièces mobiles, ce qui signifie moins de réparations.
7. Stérilisation
Lorsque vous sélectionnez ce programme, l’eau chauffe jusqu’à atteindre une température
extrêmement élevée, de manière à éliminer 99,9% des bactéries que l’on trouve
typiquement dans les vêtements, la literie ou le linge de toilette. Cette procédure de
certification est réalisée par NSF International, un organisme indépendant d’essais et de
d’homologation.
Veuillez consulter l’étiquette d’entretien de vos vêtements afin d’éviter tout dommage. Seuls
les cycles de stérilisation ont été conçus de manière à répondre aux exigences imposées
par le protocole d’efficacité de la stérilisation.
NSF Protocol P172
Sanitization Performance of Residential and
Commercial, Family-Sized Clothes Washers
8. Pure Cycle
La fonction de nettoyage du tambour Pure Cycle permet d’entretenir la propreté de
votre lave-linge, sans ajouter de nettoyant chimique ni d’eau de Javel. Ce programme de
nettoyage spécial vous donne l’assurance d’avoir toujours un tambour propre et sans odeur.
2_ caractéristiques de votre nouveau lave-linge VRT™
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
2
2010-04-29 �� 3:54:24
9. Sécurité enfant
La fonction Sécurité enfant empêche les plus jeunes de jouer avec le lave-linge.
Cette fonction de sécurité empêche non seulement les enfants de jouer avec les fonctions
du lave-linge, mais elle vous avertit aussi lorsqu’elle est activée.
10.Socle avec tiroir de rangement (N° de modèle : WE357A7P/E/W/R)
Un socle de 38,1 cm permettant de surélever le lave-linge est disponible en option, pour un
chargement et un déchargement plus faciles.
Un tiroir de rangement pouvant contenir un baril de lessive de 3 litres est aussi intégré.
11.Superposition (N° de modèle : SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)
Les lave-linge et sèche-linge Samsung peuvent être superposés afin d’optimiser l’espace
utilisable. Un kit de superposition est disponible en option auprès de votre revendeur
Samsung.
<Support avec tiroirs de stockage>
<Superposition>
caractéristiques de votre nouveau lave-linge VRT™ _3
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
3
2010-04-29 �� 3:54:25
consignes de sécurité
Félicitations pour l’achat de votre nouveau lave-linge Samsung. Ce manuel contient
de précieuses informations concernant l’installation, l’utilisation et l’entretien de
votre appareil. Prenez le temps de le lire afin de tirer pleinement profit de toutes les
fonctionnalités qu’offre votre lave-linge.
ReMaRqueS iMPoRTanTeS SuR leS ConSigneS De SÉCuRiTÉ
Les consignes de sécurité et les avertissements décrits dans ce manuel ne sont pas exhaustifs. Il est de
votre responsabilité de faire preuve de bon sens, de prudence et de discernement lors de l’installation, de
l’entretien ou de l’utilisation de votre lave-linge.
SyMboleS eT MeSuReS De SÉCuRiTÉ iMPoRTanTS
Signification des icônes et signes repris dans ce manuel
d’utilisation :
Risques ou pratiques inadaptées susceptibles de causer de graves
blessures ou la mort.
AVERTISSEMENT
ATTENTION
Risques ou pratiques inadaptées susceptibles de causer des blessures
moins importantes ou des dommages matériels.
Pour réduire le risque d’incendie, d’explosion, d’électrocution ou de
blessure personnelle lors de l’utilisation de votre lave-linge, observez les
consignes élémentaires de sécurité suivantes :
ATTENTION
NE PAS faire.
NE PAS démonter.
NE PAS toucher.
Suivre attentivement les instructions.
Débrancher la prise murale.
S’assurer que l’appareil est relié à la terre afin d’éviter tout choc
électrique.
Contacter le service d’assistance technique pour obtenir de l’aide.
Remarque
Ces symboles d’avertissement ont pour but d’éviter tout risque de blessure corporelle.
Respectez-les en toutes circonstances.
lisez attentivement la section Consignes de sécurité de ce manuel et conservez ce
dernier en lieu sûr afin de pouvoir le consulter ultérieurement.
Lisez attentivement toutes les consignes avant d’utiliser l’appareil.
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
4_ consignes de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
4
2010-04-29 �� 3:54:25
AVERTISSEMENT : afin de réduire les risques d’incendie, d’électrocution ou de blessures
aVeRTiSSeMenT physiques lors de l’utilisation de l’appareil, des précautions de base doivent être prises.
1. Lisez attentivement toutes les consignes avant d’utiliser l’appareil.
2. Ne lavez et ne faites sécher aucun article ayant été en contact de quelque manière que
ce soit (nettoyage, lavage, immersion ou tache) avec de l’essence, des solvants de
nettoyage à sec ou toute autre substance inflammable ou explosive. Ces substances
dégagent en effet des vapeurs qui risquent de s’enflammer ou d’exploser.
3. Ne laissez pas les enfants jouer sur ou dans l’appareil. Une surveillance attentive
s’impose lorsque l’appareil est utilisé à proximité d’enfants.
4. Avant la mise hors service ou au rebut de l’appareil, retirez le hublot du compartiment de
lavage ou de séchage.
5. N’ouvrez pas l’appareil lorsque le tambour est en mouvement.
6. N’installez et n’entreposez jamais cet appareil dans un endroit exposé aux intempéries.
7. Ne manipulez pas les commandes internes de l’appareil.
8. Ne procédez pas à la réparation ou au remplacement des pièces de l’appareil et ne
tentez pas non plus de le réparer vous-même sauf si le manuel d’entretien ou de
réparation contient des recommandations spécifiques en la matière que vous comprenez
et êtes en mesure d’exécuter.
9. N’ajoutez jamais d’essence, de solvant de nettoyage à sec ou d’autres substances
inflammables ou explosives dans l’eau du lave-linge. Ces substances dégagent en effet
des vapeurs qui risquent de s’enflammer ou d’exploser.
10. Dans certaines conditions, de l’hydrogène peut s’accumuler dans les systèmes de
production d’eau chaude qui n’ont pas été utilisés depuis au moins deux semaines.
L’HYDROGÈNE EST UN GAZ EXPLOSIF. Si votre réseau d’eau chaude n’a pas été
utilisé pendant au moins deux semaines, ouvrez tous les robinets d’eau chaude de votre
maison et laissez l’eau couler plusieurs minutes avant d’utiliser votre lave-linge ou votre
lave-linge/sèche linge combiné. Cela permettra d’éliminer l’éventuelle accumulation
d’hydrogène. L’hydrogène étant un gaz inflammable, ne fumez pas et ne créez aucune
flamme ni étincelle pendant cette opération.
CONSERVEZ SOIGNEUSEMENT CES CONSIGNES
consignes de sécurité _5
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
5
2010-04-29 �� 3:54:25
consignes de sécurité
SyMboleS D’aVeRTiSSeMenT a ReSPeCTeR abSoluMenT
PouR l’inSTallaTion
aVeRTiSSeMenT
Branchez le cordon d’alimentation sur une prise murale CA 120V/60Hz/15A ou supérieur et
utilisez cette prise uniquement pour cet appareil. N’utilisez pas de rallonge.
-
Le fait de partager une prise murale avec d’autres appareils à l’aide d’une multiprise ou
d’une rallonge peut entraîner des chocs électriques ou des incendies.
N’utilisez pas de transformateur électrique. Il pourrait entraîner un incendie ou un choc électrique.
Assurez-vous que la tension, la fréquence et le courant sont identiques à ceux inscrits
sur les spécifications du produit. Le non-respect de cette consigne peut entraîner des
chocs électriques ou des incendies.
-
-
L’installation de cet appareil doit être effectuée par un technicien ou un centre de réparation
qualifié.
-
Le non-respect de cette consigne peut entraîner des chocs électriques, des incendies,
une explosion, des problèmes avec le produit ou des blessures.
Éliminez régulièrement toute eau, poussière ou corps étranger des prises murales et zones
de contact à l’aide d’un chiffon sec.
-
-
Débranchez le cordon d’alimentation et nettoyez-le à l’aide d’un chiffon sec.
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
Branchez le cordon d’alimentation dans la prise murale dans le bon sens, de sorte que le
cordon soit dirigé vers le sol.
-
Si vous branchez le cordon d’alimentation dans l’autre sens, les fils électriques à l’intérieur du
câble pourront être endommagés, entraînant un risque de choc électrique ou d’incendie.
Cet appareil doit être correctement mis à la terre.
Ne reliez pas le conducteur de terre de l’appareil à un tuyau de gaz, un tuyau de
canalisation en plastique ou une ligne téléphonique.
-
Cela pourrait causer des chocs électriques, des incendies, une explosion ou des
problèmes avec le produit.
Ne branchez jamais le cordon d’alimentation sur une prise qui n’est pas correctement reliée
à la terre et qui n’est pas conforme aux réglementations locales et nationales en vigueur.
-
N’installez jamais cet appareil près d’un radiateur ou de matériaux inflammables.
N’installez pas cet appareil dans un endroit humide, huileux ou poussiéreux, dans un
endroit exposé directement au soleil ou à l’eau (de pluie).
N’installez pas cet appareil dans un endroit présentant un risque de fuites de gaz.
-
Cela pourrait entraîner un choc électrique ou un incendie.
Branchez correctement le cordon d’alimentation dans la prise murale. N’utilisez pas de
prise ou de cordon d’alimentation endommagé(e) ou de prise murale mal fixée.
-
Cela pourrait entraîner un choc électrique ou un incendie.
Ne tirez pas et ne pliez pas excessivement le cordon d’alimentation.
Ne vrillez pas et n’attachez pas le cordon d’alimentation.
N’accrochez pas le cordon d’alimentation sur un objet métallique, ne posez pas d’objet
lourd sur le cordon d’alimentation, ne l’insérez pas entre des objets et ne le coincez pas
dans l’espace situé derrière l’appareil.
-
Cela pourrait entraîner un choc électrique ou un incendie.
Ne tirez pas sur le cordon d’alimentation pour le débrancher.
-
-
Débranchez le cordon en tenant la prise.
Le non-respect de cette consigne peut entraîner des chocs électriques ou des incendies.
Si la prise ou le cordon d’alimentation est endommagé(e), contactez le centre de réparation
le plus proche.
6_ consignes de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
6
2010-04-29 �� 3:54:26
aTTenTion SigneS De PRÉCauTion PouR l’inSTallaTion
Cet appareil doit être positionné de façon à permettre l’accès à la prise d’alimentation.
-
Le non-respect de cette consigne peut entraîner un choc électrique en cas de fuites de
courant.
Installez l’appareil sur un sol plan et dur, capable de supporter son poids.
-
Le non-respect de cette consigne peut entraîner des vibrations et des bruits anormaux
ou des problèmes avec l’appareil.
Débranchez la prise d’alimentation lorsque l’appareil n’est pas utilisé pendant des périodes
prolongées ou lors d’orages violents.
-
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
SyMboleS D’aVeRTiSSeMenT a ReSPeCTeR abSoluMenT
loRS De l’uTiliSaTion
aVeRTiSSeMenT
Si l’appareil est inondé, coupez immédiatement l’alimentation électrique et contactez le
centre de réparation le plus proche.
Si l’appareil produit un bruit étrange ou dégage une odeur de brûlé ou de la fumée,
débranchez immédiatement la prise d’alimentation et contactez le centre de réparation le
plus proche.
-
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
En cas de fuite de gaz (propane, gaz LP, etc.) ventilez immédiatement sans toucher à la
prise d’alimentation. Ne touchez pas l’appareil ou le cordon d’alimentation.
-
-
N’utilisez pas de ventilateur.
Une étincelle peut entraîner une explosion ou un incendie.
Ne lavez jamais de linge ayant été en contact avec de l’essence, du kérosène, du benzène,
des diluants de peinture ou toute autre substance inflammable ou explosive.
-
Cela pourrait entraîner un choc électrique, un incendie ou une explosion.
Ne forcez pas l’ouverture du hublot pendant le fonctionnement de l’appareil (lavage à haute
température/séchage/essorage).
-
Un écoulement d’eau hors du lave-linge peut entraîner des brûlures ou rendre le sol
glissant, entraînant des blessures.
-
L’ouverture forcée du hublot peut entraîner des dommages sur l’appareil et des
blessures.
Assurez-vous de retirer l’emballage (mousse, polystyrène) fixé au bas du lave-linge avant
d’utiliser celui-ci.
N’insérez pas votre main sous le lave-linge.
-
Cela pourrait entraîner des blessures.
consignes de sécurité _7
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
7
2010-04-29 �� 3:54:26
consignes de sécurité
Ne touchez pas la prise d’alimentation avec des mains mouillées.
Cela pourrait entraîner un choc électrique.
-
N’éteignez pas l’appareil en débranchant la prise d’alimentation pendant qu’un cycle de
fonctionnement est en cours.
-
Le fait de rebrancher la prise d’alimentation dans la prise murale peut provoquer une
étincelle et entraîner un choc électrique ou un incendie.
Conservez tous les matériaux d’emballage hors de portée des enfants ; les matériaux
d’emballage présentent des dangers pour les enfants.
-
Si un enfant met un sac en plastique sur sa tête, il risque de s’asphyxier.
Ne laissez pas les enfants ou des personnes handicapées utiliser ce lave-linge sans
surveillance.
-
Le non-respect de cette consigne peut entraîner des chocs électriques, des brûlures ou
des incendies.
N’insérez pas votre main ou un objet métallique sous le lave-linge pendant son
fonctionnement.
-
Cela pourrait entraîner des blessures.
N’essayez pas de réparer, de démonter ou de modifier l’appareil vous-même.
-
-
N’utilisez pas de fusible (cuivre, fil d’acier, etc.) autres que le fusible standard.
En cas de besoin de réparation ou de réinstallation de l’appareil, contactez le centre de
réparation le plus proche.
Le non-respect de cette consigne peut entraîner des chocs électriques, des incendies,
des problèmes avec le produit ou des blessures.
-
Si une substance étrangère telle que de l’eau a pénétré dans l’appareil, débranchez la prise
d’alimentation et contactez le centre de réparation le plus proche.
-
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
Si le tuyau d’arrivée d’eau se déconnecte du robinet et inonde l’appareil, débranchez la
prise d’alimentation.
-
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
aTTenTion
SigneS De PRÉCauTion loRS De l’uTiliSaTion
Si le lave-linge est souillé par des corps étrangers tels que détergent, saletés, déchets
alimentaires etc., débranchez la prise d’alimentation et nettoyez le lave-linge à l’aide d’un
chiffon doux humide.
-
À défaut, une décoloration, une déformation, des dommages ou de la rouille peuvent
apparaître.
La vitre du hublot peut être endommagée par un impact fort. Utilisez le lave-linge avec
précaution.
-
Lorsque la vitre du hublot est endommagée, il existe un risque de blessures.
Après une interruption d’arrivée d’eau ou en rebranchant le tuyau d’arrivée d’eau au
robinet, ouvrez celui-ci lentement.
Ouvrez le robinet d’arrivée d’eau lentement après une période prolongée de non-utilisation.
-
La pression d’air dans le tuyau d’arrivée d’eau ou la canalisation d’eau peut entraîner
des dommages à certaines pièces ou une fuite d’eau.
En cas de vidange défaillante durant un cycle, vérifiez s’il y a un problème de vidange.
-
Si le lave-linge est utilisé en présence d’eau résultant d’un problème de vidange, il existe
un risque de choc électrique ou d’incendie résultant d’une fuite de courant.
8_ consignes de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
8
2010-04-29 �� 3:54:26
Introduisez complètement le linge dans le lave-linge afin qu’il ne reste pas coincé dans la
porte.
-
Si du linge reste coincé dans la porte, il peut être endommagé, ainsi que le lave-linge, ou
une fuite d’eau peut survenir.
Assurez-vous que le robinet est fermé lorsque le lave-linge n’est pas utilisé.
-
-
Assurez-vous que la vis sur le raccord du tuyau d’arrivée d’eau est correctement serrée.
Le non-respect de cette consigne peut entraîner des dommages matériels et des
blessures.
Vérifiez que le joint en caoutchouc n’est pas souillé de substances étrangères (déchets, fil,
etc.)
-
Si le hublot n’est pas complètement fermé, des fuites d’eau peuvent en résulter.
Ouvrez le robinet et vérifiez que le raccord du tuyau d’arrivée d’eau est fermement serré et
qu’il n’y a aucune fuite d’eau avant d’utiliser l’appareil.
-
Si les vis ou le raccord du tuyau d’arrivée d’eau sont desserrés, des fuites d’eau peuvent
survenir.
Ne montez pas sur l’appareil et ne placez pas d’objets (tels que linge, bougies allumées,
cigarettes allumées, vaisselle, produits chimiques, objets métalliques, etc.) sur l’appareil.
-
Cela pourrait causer des chocs électriques, des incendies, des problèmes avec
l’appareil ou des blessures.
Ne faites pas fonctionner l’appareil avec des mains mouillées.
Cela pourrait entraîner un choc électrique.
-
Ce pulvérisez pas de matières volatiles telles que de l’insecticide sur la surface de l’appareil.
-
En plus d’être nocives pour l’être humain, elles peuvent également entraîner des chocs
électriques, des incendies ou des problèmes avec l’appareil.
Ne placez pas d’objet générant un champ électromagnétique à proximité du lave-linge.
Ceci pourrait entraîner des blessures résultant de dysfonctionnements.
-
L’eau vidangée durant un cycle de séchage ou de lavage à haute température étant
chaude, ne touchez pas cette eau.
-
Cela pourrait entraîner des brûlures ou des blessures.
Ne lavez, essorez et ne séchez pas de sièges, tapis ou vêtements imperméables (*).
-
-
*
Ne lavez pas de tapis épais et durs même s’ils portent le sigle lave-linge sur leur
étiquette d’entretien.
Ceci pourrait provoquer des vibrations anormales entraînant des blessures ou des
dommages sur le lave-linge, les murs, le sol ou le linge.
Linge de lit en laine, vêtements de pluie, veste de pêche, pantalons de ski, sacs
de couchage, protections de langes, vêtements de sudation, de cyclisme, de
motocyclisme, bâches automobiles, etc.
Ne faites pas fonctionner le lave-linge sans le tiroir à lessive.
Ceci pourrait entraîner un choc électrique ou des blessures résultant de la fuite d’eau.
-
Ne touchez pas l’intérieur du tambour alors qu’il est chaud, durant ou juste après le
séchage.
-
Cela pourrait entraîner des brûlures.
N’introduisez pas votre main dans le tiroir à lessive après l’avoir ouvert.
-
Ceci pourrait entraîner des blessures si votre main reste bloquée par le système d’arrivée
de lessive.
consignes de sécurité _9
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd
9
2010-04-29 �� 3:54:26
consignes de sécurité
Ne placez pas d’objets (tels que chaussures, déchets alimentaires, animaux) autres que du
linge dans le lave-linge.
-
Ceci pourrait endommager le lave-linge ou provoquer des vibrations anormales
entraînant des blessures, voire la mort dans le cas d’animaux domestiques.
N’actionnez pas les boutons à l’aide d’objets tranchants tels que des aiguilles, des
couteaux, les ongles etc.
-
Cela pourrait entraîner un choc électrique ou des blessures.
Ne lavez pas de linge entré en contact avec des huiles, crèmes ou lotions utilisées dans les
salons de beauté ou de massage.
-
Ceci pourrait provoquer une déformation du joint en caoutchouc, entraînant des fuites d’eau.
Ne laissez pas d’objets métalliques tels que des épingles de sûreté ou des épingles à
cheveux dans le tambour ; ne laissez pas d’agent de blanchiment dans le tambour pendant
des périodes prolongées.
-
-
Ceci pourrait entraîner l’apparition de rouille sur le tambour.
Si de la rouille commence à se former sur la surface du tambour, appliquez-y un produit de
nettoyage (neutre) et frottez à l’aide d’une éponge. N’utilisez jamais de brosse métallique.
N’utilisez pas directement de solvants de nettoyage à sec et ne lavez, ne rincez et
n’essorez pas de linge entré en contact avec des solvants de nettoyage à sec.
-
Ceci pourrait entraîner une combustion ou une inflammation spontanée résultant de la
chaleur dégagée par l’oxydation de l’huile.
N’utilisez pas d’eau chaude provenant d’appareils de refroidissement/de réchauffement d’eau.
Ceci pourrait entraîner des dysfonctionnements du lave-linge.
-
N’utilisez pas de savon naturel pour les mains dans le lave-linge.
-
S’il durcit et s’accumule dans le lave-linge, des problèmes de dysfonctionnement, de
décoloration, de rouille ou de mauvaises odeurs peuvent en résulter.
Ne lavez pas d’articles de grande taille tels que du linge de lit dans un filet de lavage.
-
Placez les chaussettes et les soutiens-gorge dans le filet de lavage et lavez-les avec le
reste du linge.
-
Dans le cas contraire, des vibrations anormales peuvent engendrer des blessures.
N’utilisez pas de détergent solidifié.
S’il s’accumule dans le lave-linge, des fuites d’eau peuvent en résulter.
-
Ne lavez pas les lingettes jetables ou les paillassons.
-
Le sable et les poussières risqueraient de s’accumuler à l’intérieur du lave-linge. Les
performances de certaines fonctions s’en trouveraient altérées (ex. : essorage).
SyMboleS D’aVeRTiSSeMenT À ReSPeCTeR abSoluMenT
PouR le neTToyage
aVeRTiSSeMenT
Ne nettoyez pas l’appareil en pulvérisant directement de l’eau dessus.
N’utilisez pas de benzène, de diluant ou d’alcool pour nettoyer l’appareil.
-
Cela pourrait entraîner des décolorations, des déformations, des dommages, des chocs
électriques ou un incendie.
Avant d’effectuer un nettoyage ou un entretien, débranchez le cordon d’alimentation de la
prise murale.
-
Le non-respect de cette consigne peut entraîner des chocs électriques ou des
incendies.
10_ consignes de sécurité
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 10
2010-04-29 �� 3:54:26
contenu
contenu _11
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 11
2010-04-29 �� 3:54:26
N’installez pas votre lave-linge dans un endroit qui risque d’être exposé au gel : il reste en effet
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 14
2010-04-29 �� 3:54:27
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 15
2010-04-29 �� 3:54:28
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 16
2010-04-29 �� 3:54:29
Lors de l’essorage, le lave-linge peut ajouter de l’eau afin de compenser les éventuels déséquilibres
La durée réelle nécessaire à la réalisation d’un programme peut différer de la durée estimée affichée
9. Avant de se remplir, votre lave-linge émet une série de cliquetis ; ces cliquetis indiquent qu’il vérifie que
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 17
2010-04-29 �� 3:54:29
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 19
2010-04-29 �� 3:54:29
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 21
2010-04-29 �� 3:54:30
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 22
2010-04-29 �� 3:54:30
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 23
2010-04-29 �� 3:54:30
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 24
2010-04-29 �� 3:54:30
Sélectionnez le programme Lavage rapide et versez de l’eau de Javel dans le distributeur automatique.
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 25
2010-04-29 �� 3:54:31
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 26
2010-04-29 �� 3:54:31
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 27
2010-04-29 �� 3:54:31
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 28
2010-04-29 �� 3:54:32
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 29
2010-04-29 �� 3:54:32
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 30
2010-04-29 �� 3:54:32
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 31
2010-04-29 �� 3:54:32
Les symboles suivants fournissent des conseils d’entretien des vêtements. Les étiquettes d’entretien
nettoyage à sec, le cas échéant. L’utilisation de ces symboles garantit la cohérence des informations entre
du chauffe-eau et de la température d’arrivée d’eau. Par exemple, en hiver, l’eau froide au robinet dans
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 32
2010-04-29 �� 3:54:32
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 33
2010-04-29 �� 3:54:32
C
D
A
B
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 34
2010-04-29 �� 3:54:32
autorisés par SAMSUNG et susceptibles d’endommager ledit appareil ou de nuire à son fonctionnement ;
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 35
2010-04-29 �� 3:54:33
exclusions énoncées ci-dessus ne s’appliquent pas à votre cas. La présente garantie vous octroie des
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 36
2010-04-29 �� 3:54:33
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 37
2010-04-29 �� 3:54:33
Download from Www.Somanuals.com. All Manuals Search And Download.
WF410AN-02657F_CFR.indd 38
2010-04-29 �� 3:54:33
|