VIDEO
CASSETTE RECORDER
SV-645B
SV-643B
SV-640B
Instruction Manual
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents (cont.)
GB
★ FOREWORD
Safety Instructions.........................................................................................
★ SEARCHING FOR A SEQUENCE
★
6
★
★
★
★
★
★
Playing a Cassette in Slow Motion ................................................................ 33
Playing a Sequence Frame by Frame........................................................... 34
Picture Search, Fast Forward/Rewind........................................................... 34
Searching for a Specific Sequence ............................................................... 35
Auto Repeat Play........................................................................................... 36
Interval Repeat Play ...................................................................................... 36
★ VCR OVERVIEWS
★
★
★
★
★
Front View of the VCR...................................................................................
7
7
8
9
9
Rear View of the VCR ...................................................................................
Infrared Remote Control................................................................................
Display Indicators ..........................................................................................
Accessories ...................................................................................................
★ EASY OPERATION
★
★
★
VPS/PDC Default .......................................................................................... 37
VIDEOPLUS+ EXTEND (SV-645B/SV-643B Only)....................................... 38
Using the Tape Counter ................................................................................ 38
★ CONNECTING YOUR VIDEO CASSETTE RECORDER
★
★
★
★
★
★
Deciding How to Connect Your VCR............................................................. 10
Connecting Your VCR to the TV using the Coaxial Cable and SCART cable..... 11
Connecting Your VCR to the Satellite receiver or Other Equipment ............. 12
Connecting the Audio Output Cable.............................................................. 13
Plug & Auto Set Up........................................................................................ 13
Tuning Your Television for the VCR.............................................................. 14
★ ADVANCED RECORDING FEATURES
★
★
★
Connecting an RCA Audio/Video Input cable (SV-645B Only)...................... 39
Using the Assemble Edit Function................................................................. 40
Recording from Another VCR or Camcorder................................................. 40
★ SETTING UP YOUR VIDEO CASSETTE RECORDER
★ OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS
★
★
★
★
★
★
★
★
Inserting Batteries in the Remote Control...................................................... 15
Setting the Date and Time............................................................................. 15
Displaying/Hiding On-Screen Information ..................................................... 16
Setting the VCR Output Channel................................................................... 16
Presetting the Stations Automatically............................................................ 17
Presetting the Stations Manually................................................................... 18
Clearing a Preset Station............................................................................... 19
Changing the Preset Station Table................................................................ 20
★
★
★
★
Auto Power Off .............................................................................................. 41
Child Door Lock System (SV-643B/SV-640B Only) ...................................... 41
ECO Mode-Reducing Standby power consumption...................................... 41
Technical Specifications................................................................................ 42
★ SOLVING PROBLEMS
★
Problems and Solutions................................................................................. 43
Service Centers List ...................................................................................... 44
★
★ RECORDING TELEVISION BROADCASTS
★
★
★
★
★
★
★
★
★
★
★
Selecting the Cassette Type.......................................................................... 21
Selecting the Recording Speed..................................................................... 21
NICAM........................................................................................................... 22
Protecting a Recorded Cassette.................................................................... 23
Recording a Programme Immediately........................................................... 23
Recording a Programme with Automatic Stop............................................... 24
Using the VIDEOPLUS+ Feature (SV-645B/SV-643B Only)......................... 25
Modifying VIDEOPLUS+ Programming (SV-645B/SV-643B Only) ............... 26
Using the Timer Programming Feature ......................................................... 27
Checking a Preset Recording........................................................................ 28
Cancelling a Preset Recording...................................................................... 28
Symbols
★ PLAYING BACK
★
★
★
★
★
★
★
Playing a Cassette......................................................................................... 29
Adjusting Picture Alignment Automatically .................................................... 29
Adjusting Picture Alignment Manually ........................................................... 29
Intelligent Picture Control .............................................................................. 30
Format 16:9 (Wide Screen) ........................................................................... 31
Selecting the Colour Mode ............................................................................ 31
Selecting the Audio Output Mode.................................................................. 32
1
1
★
★
★
Press/push
Hold down
Important
Note
Option
= Step number
1
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View of the VCR
Safety Instructions
GB
(SV-645B)
VIDEO CASSETTE
COMPARTMENT
RECORD
BUTTON
EJECT
BUTTON
REW
BUTTON
INFRARED REMOTE
The following illustrations represent precautions.
SENSOR
F.F
BUTTON
STANDBY/ON
BUTTON
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE VCR. Refer to service personnel.
EJECT
STANDBY/ON
STOP
REC II P/S
PROG
VIDEO
L-AUDIO-R
AUX
10%
75%
40°C
H
H
5°C
AUX VIDEO INPUT AUX AUDIO L, R
SOCKET INPUT SOCKETS
PROGRAM SELECTION PAUSE/STILL
PLAY
BUTTON
STOP
BUTTON
BUTTONS
BUTTON
(SV-643B/SV-640B)
STANDBY/ON
BUTTON
Do NOT expose the VCR to
extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the VCR to
direct sunlight.
Do NOT expose the VCR to
any liquids.
VIDEO CASSETTE
COMPARTMENT
RECORD
BUTTON
REW
BUTTON
F.F
BUTTON
EJECT
BUTTON
STANDBY/ON
EJECT
REW PLAY F.F
PROG
REC
STOP
PROGRAMME SELECTION
BUTTONS
PLAY
BUTTON
STOP
BUTTON
Do NOT place any objects on
the VCR or remote control.
During a storm and/or light-
ning, unplug the VCR from the
mains socket and aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
Rear View of the VCR
AV2 (SATELLITE) IN SCART
(EURO-21) SOCKET
AERIAL IN
CONNECTOR
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
AV2 (SATELLITE) IN
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
AV1 (EURO AV) IN/OUT
SCART (EURO-21) SOCKET
RCA AUDIO L, R OUTPUT
SOCKETS
OUT TO TV
CONNECTOR
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control
Display Indicators
GB
(SV-645B)
1
2
3
4
STANDBY/ON
EJECT
1 Cassette loaded indicator
2 ECO Mode display
3 Multi-function display
4 Timer indicator
EJECT BUTTON
STANDBY/ON BUTTON
SLOW
SLOW BUTTON
SHUTTLE
SHUTTLE BUTTON
V-LOCK
Hi-Fi
5
5 Hi-Fi indicator
V-LOCK BUTTON
CLR/RST
A.TRK
F.ADV
IPC
INDEX
6 Rec indicator
INDEX BUTTON
CLEAR AND RESET BUTTON
FRAME ADVANCE BUTTON
INPUT
★
AUTO TRACKING BUTTON
IPC BUTTON
TUNER, AV1, AV2, AUX (SV-645B ONLY)
6
REPEAT
SELECTION / REPEAT SELECTION BUTTON
PROGRAMME SELECTION BUTTON
DISPLAY BUTTON
TRACKING BUTTONS
AUDIO
DISPLAY
TRK
PROG
AUDIO MODE SELECTION BUTTON
(SV-643B/SV-640B)
PLAY/PAUSE/STILL BUTTON
STOP BUTTON
FAST-FORWARD/FORWARD
SEARCH BUTTON
REWIND/REVERSE PICTURE
SEARCH BUTTON
REC
MENU
MENU BUTTON
RECORD BUTTON
1
2
3
4
MENU SELECTION UP BUTTON
OK
MENU SELECTION BUTTON
MENU SELECTION BUTTON
1 Cassette loaded indicator
2 ECO Mode display
3 Multi-function display
4 Timer indicator
MENU SELECTION DOWN BUTTON
OK BUTTON
SPEED
DUB
TV/VCR
TIMER
RECORDING SPEED SELECTION BUTTON
TIMER BUTTON
Hi-Fi
5
5 Hi-Fi indicator
6 Rec indicator
6
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (VCR).
Together with your VCR, you will find the following accessories in the box.
REMOTE CONTROL &
BATTERIES “AA”
AUDIO CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your VCR to the TV using the Coaxial
Cable and SCART cable
Deciding How to Connect Your VCR
GB
You must take into account various factors when connecting audio or video systems:
To receive television programmes a signal must be received from
one of the following sources:
★
★
Types of connectors available on your systems
★
★
★
★
An outdoor aerial
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
An indoor aerial
AV2 (SATELLITE
A cable television network
A satellite receiver
Your VCR is equipped with the following connectors.
T
★
Make sure that both the television and the VCR are
switched off before connecting the cables.
2
AV1 (EURO A
Connector
Location
Type
Direction
Recommended Use
1
2
Remove the aerial or network input cable from the television.
Connect this cable to the 75Ω coaxial socket marked
rear of your VCR.
on the
AV1 (EURO AV) Rear
SCART
In/Out
★ Television
★ Satellite receiver
★ Other VCR
AV1 (EURO AV)
TV
3
4
Plug the coaxial cable supplied into the
socket on your VCR.
AV2 (SATELLITE) IN
AV1 (EURO AV)
3
TV
AV2
(DEC./EXT.)
Rear
SCART
In
★ Satellite receiver
★ Other VCR
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
OUT/SORTIE
AV2 (DEC./EXT.)
R/D
TV
AUDIO
L/G
5
6
Connect one end of the scart cable to the AV1 (EURO AV) socket
on the rear of the VCR. You must connect your VCR to the
television via the scart cable.
Audio output
OUT TO TV
Rear
Audio RCA
Out
★ Audio Hi-Fi system
4
OUT/SORTIE
R/D
AUDIO
L/G
Plug the other end into the appropriate connector on the
television.
Rear
75 Ω
Out
In
★ Television
OUT/SORTIE
TV
R/D
coaxial
TV
AUDIO
L/G
AV1 (EURO AV)
5
IN FROM ANT. Rear
75 Ω
★ Aerial
coaxial
★ Cable television network
★ Satellite receiver
AUX
Front
Audio/Video RCA
In
★ Audio Hi-Fi system
★ Camcorder
VIDEO
L-AUDIO-R
AUX
★
(SV-645B Only)
★
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your VCR to the Satellite receiver or Other
Equipment
Connecting the Audio Output Cable
GB
You can connect your VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi
stereo system when watching a programme or recording
via your VCR.
You can connect your VCR to a Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
AV2 (SATELLITE) IN
OUT/SORTIE
★
★
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
1. AV2(DEC./EXT.): By means of 21-pin Scart Cable
1
★
Make sure that both the television and the VCR are
switched off before connecting the cables.
Plug the SCART Cable with satellite receiver or other equipment into the AV2(DEC./EXT.) socket on the rear of
the VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
1
2
Connect the coaxial cable or SCART as indicated on page 11.
2. By means of RF Coaxial Cable
AV2 (SATELLITE) IN
2
Plug the audio output cable into the audio connectors on the rear
of your VCR.
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 60, which is used by the VCR,
e.g. re-adjust to channel 65.
OUT/SORT
R/D
★
Respect the colour coding of the left and right channels.
AUDIO
L/G
AV1 (EURO AV)
3
Plug the other end of the audio cable into the appropriate input
connectors on your Hi-Fi stereo system.
2
Aerial
Satellite Receiver or other Equipment
Aerial Connector
Plug & Auto Set Up
AV1 (EURO AV)
2
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
SCART Cable
TV
1
TV
AV2 (SATELLITE) IN
OUT/SORTIE
1
2
3
Connect the coaxial cable as indicated on page 11.
(Connecting Your VCR to the TV Using the Coaxial Cable)
AV2 (SATELLITE) IN
R/D
TV
AUDIO
OUT/SORTIE
L/G
R/D
TV
AV1 (EURO AV)
AUDIO
L/G
URO AV)
Plug the VCR into the mains.
Result:
A message appears.
SCART Cable
Press OK button to start the auto scanning
★
★
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
The process will finish after a few minutes.
2
4
The current time and date are displayed automatically.
Check the date and time.
if it is :
★
★
Correct, Press MENU button twice to exit the menu.
incorrect, see page 15.
★
Now, you only have to switch the VCR on and it is ready
for use.
★
Function for “Plug & Auto Set Up” is fixed already.
So if you want to change this fixed one, you can change
it by Presetting the Stations Automatically in OSD “ Auto
Set Up” menu. (see page 17)
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning Your Television for the VCR
You must tune your television for the VCR only if you are not using
a Scart cable
★
To view pictures from your VCR when a Scart cable is
used, the television must be set to the audio/video mode
(AV).
STANDBY/ON
EJECT
SLOW
2
1
2
Switch on the television.
SHUTTLE
V-LOCK
Switch on the VCR by pressing STANDBY/ON on the front of the
VCR or STANDBY/ON on the remote control.
3
4
Select a programme position on the television to be reserved for
use with your VCR.
Insert the video cassette in the VCR. Check that the VCR starts
reading the cassette; if not, press
.
button
❿
II
REC
U
4
5
6
7
Start a scan on your television or set the television to UHF
channel 60.
OK
Fine tune the television until the pictures and sound are obtained
clearly.
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the VCR output channel (see Setting the VCR Output Channel
on page 16 and Problems and Solutions on page 43).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result:
That programme is now reserved for use with your VCR.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Batteries in the Remote Control
GB
You must insert or replace the batteries in the remote control when
you:
◆
◆
Purchase the video cassette recorder
1
Find that the remote control is no longer working
correctly
1
2
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
– on the battery with – on the remote control
◆
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
◆
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
Your VCR contains a 24-hour clock and calendar used to:
◆
◆
Automatically stop programme recording
Preset your VCR to record a programme automatically
REC
MENU
2
You must set the date and time when:
You purchase the video cassette recorder
◆
OK
2
2
◆
◆
◆
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually.
3
SPEED
DUB
TV/VCR
TIMER
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
PROG
OPTIONS INSTALL
1
2
3
Press MENU on the remote control.
Result:
The programming menu is displayed.
CLOCK
BONUS
CLOCK SET
Press the corresponding
CLOCK SEToption.
"
,
❷
or
➛
,
❿
buttons to select the
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Press the OK button to select this option.
Result: The CLOCK SETmenu is displayed.
4
5
Press
Result:
➛
or to select the hour, minutes, day, month and year.
The option selected flashes.
❿
CLOCK
Press the
Result:
"
or ❷ buttons to increase or decrease the value.
12:00
1/JAN/2001
The day of the week is displayed automatically.
or buttons down to scroll more
quickly through the values.
On completion, press MENU twice to exit the menu.
MON
◆
You can hold the
"
❷
AUTO CLOCK : ON
6
➛❿ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
"❷
END:MENU
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying/Hiding On-Screen Information
Presetting the Stations Automatically
GB
GB
Your VCR displays most information both on the VCR and the
television.
◆
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
◆
VIDEOPLUS+ functions (SV-645B/SV-643B only), which cannot
be hidden).
Your VCR contains a built-in tuner used to receive television
broadcasts.
INSTALL
OPTIONS
PROG
OPTIONS
INSTALL
PROG
You must preset the stations received through the tuner. This can
be done:
CLOCK
BONUS
CLOCK
BONUS
INSTALLATION
USER SET
1
2
3
4
5
Press MENU on the remote control.
◆
◆
◆
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 18)
Result:
The programming menu is displayed.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
USER SEToption.
You can store up to 80 stations.
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
INSTALL
OPTIONS
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
1
2
3
4
Press the MENU button on the remote control.
Result: The programming menu is displayed.
OSD
TAPE SELECT
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
:ON
:E180
:AUTO
:AUTO
:ON
Press the corresponding
selected.
"
or
❷
buttons, until the OSDoption is
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
INSTALLATIONoption.
:OFF
:ON
END:MENU
To...
Press
➛
or ❿, until...
"❷
❿
END:MENU
"❷
❿
Press the OK button to select this option.
Display on-screen information
Hide on-screen information
ONis displayed.
Result:
The INSTALLATION menu is displayed.
OFFis displayed.
Press the corresponding
UPoption is selected. And then press the
option.
"
or
❷
buttons, until the AUTO SET
❿
button to select this
6
On completion, press MENU twice to exit the menu.
YOUR DATA WILL BE LOST
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
PRESS OK TO CONTINUE
MENU TO EXIT
5
Press OK to start the auto scanning.
Setting the VCR Output Channel
Result:
◆
◆
◆
◆
The PLEASE WAIT indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and
so on.
Your VCR output channel may need to be changed if the pictures
AUTO SET UP
PLEASE WAIT
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
INSTALL
OPTIONS
PROG
2%
I--------------------I
1
2
3
4
5
6
Press MENU on the remote control.
◆
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
CLOCK
BONUS
Result:
The programming menu is displayed.
END:MENU
INSTALLATION
Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
6
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
INSTALLATIONoption.
Press the OK button to select this option.
Result: The INSTALLATIONmenu is displayed.
◆
◆
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 15).
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
Press the corresponding
CHoption is selected.
"
or
❷
buttons, until the VCR OUTPUT
Select the required output channel (CH21~CH69) by pressing the
or buttons.
◆
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 19).
➛
❿
"❷
❿
END:MENU
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting the Stations Manually
Clearing a Preset Station
GB
GB
If you have stored a TV station:
◆
You do not need to preset the stations manually if you
have already set them automatically.
◆
◆
That you do not require
At the wrong programme position
1
2
3
4
5
Press the MENU button on the remote control.
Result: The programming menu is displayed.
INSTALL
OPTIONS
PROG
INSTALL
OPTIONS
PROG
you can cancel it.
CLOCK
BONUS
Press the corresponding
INSTALLATIONoption.
"
,
❷
or
➛
,
❿
buttons to select the
CLOCK
BONUS
INSTALLATION
1
2
Press the MENU button on the remote control.
INSTALLATION
Press the OK button to select this option.
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Result:
The INSTALLATIONmenu is displayed.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
INSTALLATIONoption.
Press the corresponding
UPoption is selected.
"
or
❷
buttons, until the MANUAL SET
3
4
5
6
Press the OK button to select this option.
Result:
The INSTALLATIONmenu is displayed.
INSTALL
Press the
Result:
❿
button to select a MANUAL SET UPoption.
The TV STATION TABLEmenu is displayed.
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
Press the corresponding
UPoption is selected.
"
or
❷
buttons, until the MANUAL SET
6
7
Press the
required.
"
or
❷
buttons to select a programme number as
Press the
Result:
❿
button to select this option.
Press the ❿ꢀbutton to preset the station.
The TV STATION TABLEmenu is displayed.
Result:
The MANUAL TUNINGmenu is displayed.
"❷
❿
END:MENU
"❷
❿
END:MENU
Press the corresponding
"
or
❷
buttons, until the required preset
8
9
Press the
Result:
➛
or buttons to start scanning.
❿
TV station (PR) is selected.
The frequency band is scanned and the first station
found is displayed.
7
8
Press the CLR/RST button.
TV STATION TABLE
**
**
TV STATION TABLE
**
**
Press the
"
or
❷
buttons until the cursor is placed in front of the
PR
CH
027
---
---
---
---
NAME
CAEB
----
----
----
----
PR
CH
027
---
---
---
---
NAME
CAEB
----
----
----
----
NAME
.
Repeat the same procedure from Step
required stations have been cleared.
6
onwards until all the
1
2
3
4
5
1
2
3
4
5
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the ❿ꢀbutton.
9
On completion, press the MENU button three times to exit the
menu.
Result:
The first letter of the name flashes.
"❷
❿
SWAPPING:OK
DELETE:CLR/RST
11 To...
Then...
"❷
❿
SWAPPING:OK
MENU
MENU
DELETE:CLR/RST
Select a character
in the name
Press the
required character is displayed
(letters, numbers or “-” character).
"
or
❷
button until the
MANUAL TUNING
**
**
Move to the next or
previous character
Press the
respectively.
❿
or
➛
buttons
PR
CH
: 1
: ---
MFT
NAME
:
-
12 If you...
Then...
Press the corresponding
: ----
Wish to store the
station displayed
◆
"
or ❷ꢀbuttons,
until the MFT is selected.
"❷
➛❿
MEMORY:OK
END:MENU
◆ Press the or buttons to adjust the
➛
❿
picture, if necessary.
◆ Press OK to store the station
Do not wish to
store the station
displayed
◆
Press the corresponding
"
or ❷ꢀbuttons,
until the CH is selected.
◆ Press the
➛
or
❿
buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
13 Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
14 On completion, press the MENU button three times to exit the
menu.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Preset Station Table
Selecting the Cassette Type
GB
GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
2
Press MENU on the remote control.
1
2
Press the MENU button on the remote control.
INSTALL
OPTIONS
Result:
The programming menu is displayed.
PROG
OPTIONS
INSTALL
PROG
Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
CLOCK
BONUS
INSTALLATIONoption.
CLOCK
BONUS
USER SEToption.
INSTALLATION
USER SET
3
4
Press the OK button to select this option.
3
4
Press the OK button to select this option.
Result:
The INSTALLATIONmenu is displayed.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Press the corresponding
"
or
❷
buttons, until the TAPE
Press the
And then press the
Result:
"
or
❷
buttons to select MANUAL SET UPoption.
button to select this option.
The TV STATION TABLEmenu is displayed.
SELECToption is selected.
❿
5
Press the
➛
or
❿
buttons as many times as required, until the
INSTALL
OPTIONS
correct cassette length is displayed.
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
5
6
Press the corresponding
"
or
❷
buttons, until the required preset
OSD
:ON
E180
E 300
E240
E260
TAPE SELECT
:E180
:AUTO
:AUTO
:ON
TV programme is selected.
COLOUR SYSTEM
FORMAT 16:9
NICAM
Result:
The selected station is displayed at the same time on
the television screen.
6
Press MENU twice to exit the menu.
ECO. MODE
IPC
:OFF
:ON
END:MENU
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
"❷
❿
END:MENU
"❷
❿
7
8
9
Press the
press OK again to swap the position.
"
or
❷
buttons to select required position. And then
TV STATION TABLE
**
**
PR
CH
027
---
---
---
---
NAME
CAEB
----
----
----
----
1
2
3
4
5
You can modify this station by repeating the same procedure from
Step
5
onwards.
On completion, press the MENU button three times to exit the
menu.
Selecting the Recording Speed
"❷
SWAPPING:OK
MENU
You can record a cassette at two different speeds:
◆
SP (Standard Play)
LP (Long Play)
TV STATION TABLE
**
**
PR
CH
---
---
027
---
---
NAME
----
----
CAEB
----
----
T
ype
Recording Time (in SP)
180 mins. or 3 hours
240 mins. or 4 hours
◆
1
2
3
4
5
E-180
E-240
E-260
In Long Play modes:
◆
◆
Each cassette lasts twice as long
The recording is of a slightly lower quality
260 mins. or
4 hours and 20 mins.
"❷
SWAPPING:OK
MENU
E-300
300 mins. or 5 hours
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SPis displayed.
LPis displayed.
OK
SPEED
DUB
TV/VCR
TIMER
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting a Recorded Cassette
NICAM
GB
GB
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 32.
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
2
If you wish to protect a cassette, break off the tab using a small
screwdriver.
OPTIONS
INSTALL
PROG
1
2
Press MENU on the remote control.
CLOCK
BONUS
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Result:
The programming menu is displayed.
USER SET
1
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
USER SEToption.
3
4
5
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
Recording a Programme Immediately
OPTIONS
OSD
TAPE SELECT
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
:ON
Press the corresponding
is selected.
"
or
❷
buttons, until the NICAMoption
:E180
:AUTO
:AUTO
:ON
To...
Press
➛
or ❿, until...
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 17 and 18.
:OFF
:ON
END:MENU
Mono mode
OFFis displayed.
"❷
❿
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
REPEAT
1
2
Switch on the television.
AUDIO
DISPLAY
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
TRK
PROG
4
4
NICAM mode
ONis displayed.
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
ON: Normally set at this position.
6
On completion, press MENU twice to exit the menu.
Result:
The VCR is switched on automatically.
4
Select:
◆
◆
The station to be recorded using the PROG (
or
"
or
❷
)
buttons
SPEED
DUB
TV/VCR
TIMER
◆
The AV1, AV2 or AUX (SV-645B only) source using the
INPUT button for a satellite tuner or external video source
5
Result:
The station number is displayed and the programme
can be seen on the television.
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
Hold REC down for a while to start recording.
Result:
The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 35).
7
REC
MENU
7
To stop recording, press once.
◆
6
◆
◆
◆
If your VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Programme with Automatic Stop
GB
This function enables you to record up to nine hours (LP) of
programmes.
Your VCR stops automatically after the requested length of time.
1
2
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
A.TRK
IPC
INPUT
Result:
The VCR is switched on automatically.
REPEAT
4
Select:
4
◆
◆
The station to be recorded using the PROG (
or
"
or
❷
)
buttons
AUDIO
DISPLAY
TRK
PROG
4
◆
The AV1, AV2 or AUX (SV-645B only) source using the
INPUT button for a satellite tuner or external video source
4
Result:
The channel number is displayed and the programme
can be seen on the television.
5
6
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
Hold the REC button down for a while to start recording.
SPEED
DUB
TV/VCR
TIMER
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
5
7
8
Press the REC button several times to increase the recording time
in:
◆
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
◆
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
REC
MENU
6
If you wish to cancel the recording before the end, press
STANDBY/ON.
OK
◆
If the end of the tape is reached while recording:
◆
◆
The recording stops
The VCR automatically turns off
LENGTH 2:30
SET LENGTH :
PRESS REC
24
Download from Www.Somanuals.com. All Manuals Search And Download.
★
Using the VIDEOPLUS+ Feature (SV-645B/SV-643B Only)
GB
Before presetting your VCR:
★
★
★
Switch on both the television and your VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
SPEED
DUB
TV/VCR
TIMER
Up to six programmes can be preset.
1
1
Press the TIMER button.
Result:
The TIMER METHODis displayed.
2
3
Press the corresponding
option is selected.
"
or
❷
buttons, until the VIDEOPLUS
Press the ❿ꢀbutton to select VIDEOPLUS
.
TIMER METHOD
**
**
Result:
A message is displayed to allow you to enter the
VIDEOPLUS+ code.
STANDARD
VIDEOPLUS
★
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 28 if you wish to
cancel a preset recording.
"❷
❿
END:MENU
4
5
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
★
If you wish to correct the VIDEOPLUS+ code that you are
entering:
VIDEOPLUS
CODE ---------
★
Press the
cleared
➛
button until the digit to be corrected is
★
Enter the correct digit
Press the MENU button.
Result: The information concerning the programme is displayed.
CODE:0-9
CORRECT:➛
END:MENU
★
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
"
or
❷
buttons. Refer to the following page if:
1/JAN →MON
21:28
V/P
PROG
★
★
The programme number or times flash
You wish to modify the programme
PR DAY START→ STOP
1 MO 1 12:00→ 12:50SP ON
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:-- --:---- -
"❷ ➛❿
6
7
8
If the programme and times are correct, press the MENU button.
Press the STANDBY/ON button to activate the timer.
Refer to page 28 if you wish to:
DELETE:CLR/RST
MENU
★
★
Check that your VCR has been programmed correctly
Cancel a preset recording
★
The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
STANDBY/ON
EJECT
SLOW
7
SHUTTLE
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Modifying VIDEOPLUS+ Programming
(SV-645B/SV-643B Only)
Using the Timer Programming Feature
★
GB
The Timer Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
★
(SV-645B/SV-643B)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
TIMER METHOD
**
**
★
Before presetting a recording, check that the date and
time are correct.
If you wish to...
Then...
STANDARD
VIDEOPLUS
Select an input source other
★ Press the
➛
or
❿
buttons, until the PRselection flashes.
1
-
Insert the cassette. Press the TIMER button.
than the tuner (AV1, AV2 or
★ Press the INPUT button one or more times to change the
Press the
then press the ❿ꢀbutton or,
"
or
❷
buttons to select the STANDARD option and
★
AUX (SV-645B only)
)
input source selection.
Result:
The programme number is replaced by:
"❷
❿
END:MENU
★ Press MENU on the remote control.
★
•
The AV1, AV2 or AUX (SV-645B only) source
using the INPUT button for a satellite tuner or
external video source
Result: The programming menu is displayed.
★ Press the OK button to select TIMER PROGRAMMINGoption.
Result: The TIMER PROGRAMMINGmenu is displayed.
★
The input source must be selected before changing any
other value.
2
3
Press ❿ꢀto select the input source.
OPTIONS INSTALL
PROG
Select the required station by pressing the
"
,
❷
buttons or INPUT
Record a programme every day
★ Press the
★ Press the
displayed.
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the DLY(Daily) value is
CLOCK
BONUS
★
to select the AV1, AV2 or AUX (SV-645B only) input sources.
(Monday to Sunday) at the same time
"
❷
TIMER PROGRAMMING
4
Press
Select the required day by pressing the
Press to select the recording start time.
❿
to select the recording day.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
5
6
"
or
❷
buttons.
Record a programme every week
★ Press the
➛
or
or
❿
buttons, until the DAYselection flashes.
buttons, until the W-(Week) value is
❿
on the same day and at the same time
★ Press the
"
❷
displayed, followed by the required day.
7
Select the required hour value by pressing the
Press to select the minutes.
Select the required minute value by pressing the
"
or
❷
buttons.
Example: W-SA(Weekly Saturday)
1/JAN →MON
21:28
V/P
PROG
8
9
❿
PR DAY START→ STOP
1 MO 1 12:00→ 12:50SP ON
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:-- --:---- -
"❷ ➛❿
Extend the recording time
Select the recording speed
★ Press the
★ Press the
time.
➛
or
or
❿
buttons, until the STOPselection flashes.
buttons to increase or decrease the stop
"
or
❷
buttons.
"
❷
10 Press
❿
to select the recording end time.
11 Select the required recording end time by pressing the
"
or
❷
★ Press the
➛
or
or
❿
buttons, until the recording speed selection
buttons until the correct indication is
DELETE:CLR/RST
MENU
buttons, following the same procedure as when selecting the
recording start time.
flashes.
★ Press the
displayed:
"
❷
12 Press
❿
to select the recording speed.
• AUTO(Auto Tape Speed Select) : see page 27
• SP(Standard Play)
• LP(Long Play)
13 Press the
"
or buttons to select the SP (Standard Play), LP
❷
STANDBY/ON
EJECT
(Long Play), AUTO(Auto Tape Speed Select) recording speeds.
14 Press to select the PDC recording mode.
15 Press the or buttons to toggle between the PDC mode
❿
17
SLOW
Select the PDC recording
★ Press the
★ Press the
➛
or
or
❿
buttons, until the V/P selection flashes.
buttons until the “ON” indication is displayed.
"
❷
(marked ON) and the non-PDC mode (marked -).
"
❷
SHUTTLE
★
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
16 When you have finished, press the MENU button.
17 Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
★
Auto Tape Speed Select. The VCR’s “Auto Tape Speed
Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the VCR automatically
switches to LP mode to record the whole programme.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking a Preset Recording
Playing a Cassette
GB
You can check your preset recordings:
This function allows you to play back any pre-recorded cassette.
★
★
When you have finished presetting the VCR
1
2
Switch on both the television and your VCR.
If you have forgotten which programmes will be
recorded
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll
.
1/JAN →MON
21:28
V/P
PROG
PR DAY START→ STOP
Otherwise, the cassette is played automatically.
2
1 MO 1 12:00→ 12:50SP ON
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:-- --:---- -
1
-
Insert the cassette. Press the TIMER button.
Press the or buttons to select the STANDARD option and
then press the ❿ꢀbutton or,
3
REC
MENU
★
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
"
❷
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
★ Press MENU on the remote control.
Result: The programming menu is displayed.
"❷
SET:❿
MENU
DELETE:CLR/RST
OK
★ Press the OK button to select TIMER PROGRAMMINGoption.
Result: The TIMER PROGRAMMINGmenu is displayed.
3
To...
Then press...
2
3
Press the
"
or
❷
buttons to select the required programme.
Stop the playback
Eject the cassette
(STOP).
★
Press the
➛
or
❿
buttons to select and change any values as
required. For more details, refer to the previous page.
(EJECT).
4
On completion, press MENU twice.
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
Cancelling a Preset Recording
A.TRK
IPC
INPUT
You can cancel any programmes that are:
Incorrect
No longer required
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
★
REPEAT
★
1/JAN →MON
21:28
V/P
PROG
AUDIO
DISPLAY
Result:
★ The tracking bar appears.
PR DAY START→ STOP
TRK
PROG
1 MO 1 12:00→ 12:50SP ON
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:--→--:---- -
-- ------:-- --:---- -
★ The picture is automatically adjusted.
★ The tracking bar disappears when digital auto tracking has
been completed.
1
-
Insert the cassette. Press the TIMER button.
Press the or buttons to select the STANDARD option and
then press the ❿ꢀbutton or,
"
❷
★ Press MENU on the remote control.
Result: The programming menu is displayed.
"❷
SET:❿
MENU
DELETE:CLR/RST
★ Press the OK button to select TIMER PROGRAMMINGoption.
Result: The TIMER PROGRAMMINGmenu is displayed.
Adjusting Picture Alignment Manually
2
3
Select the programme to be cancelled by pressing the
buttons.
"
or
❷
CLR/RST
A.TRK
F.ADV
IPC
INDEX
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
A.TRK
IPC
INPUT
Press the CLR/RST button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
3
INPUT
REPEAT
When noise bars or streaks appear during playback, adjust alignment
AUDIO
DISPLAY
manually by pressing the TRK
and stable.
(
or
)
buttons until the picture is clear
REPEAT
TRK
PROG
4
On completion, press MENU twice.
AUDIO
DISPLAY
Result:
★ The tracking bar appears.
★ The image is adjusted.
★ The tracking bar disappears when you release the button.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Intelligent Picture Control
Format 16:9 (Wide Screen)
Your VCR can automatically play Wide Screen format prerecorded
tapes. It can also record Wide Screen format programmes received
from sources such as a satellite receiver.
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
★
Connect equipment compatible with Wide Screen to the VCR
using the 21 pin SCART cable.
1
During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
OPTIONS
INSTALL
PROG
OPTIONS
INSTALL
1
2
3
4
5
Press MENU on the remote control.
PROG
Result:
The programming menu is displayed.
CLOCK
BONUS
CLOCK
BONUS
2
3
Press the corresponding
USER SEToption.
"
,
❷
or
➛
,
❿
buttons to select the
Press the corresponding
",
❷
or
➛
,
❿
buttons to select the
USER SET
USER SET
USER SEToption.
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
"❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Press the corresponding or buttons, until the
"
❷
4
5
Press the corresponding
selected.
"
or
❷
buttons, until the IPCoption is
FORMAT 16:9option is selected.
Press the ❿ꢀꢀbutton to select AUTO★★ON★★★OFF
.
OPTIONS
OPTIONS
Press the ❿ꢀbutton to select the IPC (intelligent picture control)
option.
OSD
:ON
OSD
:ON
AUTO
Set when you use a wide TV. The VCR automatically
TAPE SELECT
:E180
:AUTO
:AUTO
:ON
TAPE SELECT
:E180
:AUTO
:AUTO
:ON
COLOUR SYSTEM
FORMAT 16:9
NICAM
detects if programmes being played back or recorded
are in normal or Wide Screen format.
COLOUR SYSTEM
FORMAT 16:9
NICAM
★
When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
ECO. MODE
IPC
:OFF
:ON
END:MENU
ON
The VCR always plays back and records in 16:9 Wide
Screen format. Set if the VCR cannot detect Wide
Screen TV programmes with “AUTO” set.
ECO. MODE
IPC
:OFF
:ON
6
7
To adjust the sharpness manually, press the
❷
button to turn the
"❷
❿
IPC mode OFF
.
"❷
❿
END:MENU
OFF
Set if you do not use a Wide Screen TV.
Press the or
➛
❿
buttons until the picture is displayed according to
your preferences.
6
On completion, press MENU twice to exit the menu.
★
If you do not press a button within ten seconds, the
PICTUREmenu disappears automatically.
8
On completion, press the MENU button again.
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
1
2
During playback, press the IPC button.
★
★
When playing back a cassette, the standard is
automatically selected by the VCR.
OPTIONS
INSTALL
PROG
CLR/RST
A.TRK
F.ADV
IPC
INDEX
INPUT
Result:
The PICTUREmenu is displayed.
❷ button to turn the IPC (Intelligent Picture Control)
★
When you playback an NTSC-recorded tape on this VCR
make a setting on the colour system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
CLOCK
BONUS
Press the
USER SET
option ONand OFF
.
★
When Intelligent Picture Control mode is ON, the sharpness
of the image is adjusted automatically.
REPEAT
"
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
1
AUDIO
DISPLAY
3
4
To adjust the sharpness manually, select Intelligent Picture
Control mode OFF
The horizontal picture adjusting appears.
1
Press MENU on the remote control.
TRK
PROG
.
Result:
The programming menu is displayed.
★
OPTIONS
2
3
Press the corresponding
USER SEToption.
"
,
❷
or
➛
,
❿
buttons to select the
OSD
:ON
Press the or buttons until the picture is displayed according to
➛
❿
TAPE SELECT
:E180
:AUTO
:AUTO
:ON
your preferences.
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
PICTURE
**
**
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
Press the corresponding or buttons, until the
COLOUR SYSTEMoption is selected.
Press the button to select AUTO★★PAL★★ B/W
★
If you do not press a button within ten seconds, the
PICTUREmenu disappears automatically.
IPC
SOFTEN
:
OFF
SHARPEN
:OFF
:ON
END:MENU
4
5
"
❷
5
On completion, press the IPC button again.
"❷
❿
-------- -----
*
➛❿
ON/OFF:❷
❿
.
AUTO When playing back a cassette, the system standard is
automatically selected by the VCR.
B/W Black and White
6
On completion, press MENU twice to exit the menu.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Cassette in Slow Motion
Selecting the Audio Output Mode
GB
When monitoring a TV programme or playing back a Hi-Fi
You can play a cassette in slow motion.
recorded video tape, press the AUDIO button to select a desired
sound output. As the AUDIO button is pressed, the sound output
and the indicator change as below:
★
No sound is heard when playing back a cassette in slow
motion.
REPEAT
AUDIO
DISPLAY
SLOW
TRK
PROG
Standard
1
2
Press:
Sound type
sound
Stereo sound
Bilingual sound
★
❿ll to start playing the cassette
OSD display
broadcast
SLOW
SHUTTLE
V-LOCK
★
SLOW (
increase the speed respectively
o return to the normal speed, press the ❿ll
) as many times as required to decrease or
Channel I (MAIN)
heard from the left
speaker, channel
II (SUB) heard
from the right
1
1
Heard in stereo.
(left channel and
right channel)
Heard in
monaural.
L
R
★
T
button twice.
When playing back in slow motion, picture interference may occur.
Press the TRK or buttons to minimize this effect.
(
)
speaker.
A.TRK
IPC
INPUT
Channel I (MAIN)
heard from both
the left and the
right speakers.
Left channel heard
from both the left
and right
★
When you have been using the Slow Motion function for
more than about five minutes, the VCR will automatically
play to protect the:
2
REPEAT
Heard in
monaural.
L
AUDIO
DISPLAY
speakers.
TRK
PROG
★ Cassette
Channel II-(SUB)
heard from both
the left and the
right speakers.
Right channel
heard from both
the left and right
speakers.
★ Video heads
Heard in
monaural.
2
R
Sound mixed the left and right channels, and the
normal audio track.
MIX
Channel I (MAIN)
heard from both
the left and the
right speakers.
Heard in
monaural.
Heard in
monaural.
MONO
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Sequence Frame by Frame
Searching for a Specific Sequence
GB
You can:
Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
➞
➞
Stop the cassette at a given frame (image)
Advance one frame at a time
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
TRK
PROG
V-LOCK
F.ADV
➞
No sound is heard when playing back frame by frame.
CLR/RST
A.TRK
INDEX
1
2
Press:
1
Prev
Seq.
Seq. being Next
played Seq.
REC
MENU
➞
➞
➞
❿ll to start playing the cassette
1
IPC
INPUT
etc.
etc.
❿ll to stop the tape at a given frame
F.ADV ( F.ADV
REPEAT
2
1
1
2
to advance frame by frame
)
To return to normal playback, press ❿ll
.
➞
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
➞
➞
When you have been using the Frame-by-Frame function
for more than about five minutes, the VCR will auto-
matically play to protect the cassette and video heads.
INDEX:
➛
➛ꢀꢀꢀꢀꢀ❿
❿
INTRO SCAN
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
1
2
To search for a specific index, press INDEX.
Press the ➛➛
V-LOCK
❿❿
or
buttons depending on the direction
V-LOCK (
) buttons to minimize this effect.
where your desired programme is located.
3
4
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
Picture Search, Fast Forward/Rewind
INDEX SEARCH:
❿❿ꢀꢀꢀꢀ+01
If you want to watch the tape from a particular Index, simply press
❿
II
.
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
Index Skip Search:
1
Press PLAY, the VCR will enter normal play mode. While in play,
press and release the ❿❿ (or ➛➛) button. The VCR will search at 5
times the normal playback speed.
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
2
3
To return to normal playback mode, press the
❿
II
button.
If you press and HOLD down the ❿❿ (or ➛➛) button the VCR will
search at 9 times the normal speed. Releasing the ❿❿ button will
return the VCR to search at 5 times the normal speed. To return to
1
2
Press the INDEX to start the Index search.
Press the ➛➛
normal playback mode, press the
❿
II
button.
❿❿
or
buttons twice more. This will take
you directly to the start of the desired programme is located.
4
5
6
Whilst in Picture Search mode, if you press the ❿❿ button again,
the VCR will enter normal Fast Forward mode.
3
4
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛).
Likewise, whilst in Picture Search ➛➛ mode, if you press the ➛➛
button again, the VCR will enter normal Rewind mode.
To cancel an Index search simply press the
❿
or
button.
➞
II
If, when Redwing (➛➛) or Fast Forwarding (❿❿), you press the ➛➛
(or ❿❿) button, the VCR will enter the Picture Search mode.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Repeat Play
VPS/PDC Default
GB
You can set repeat play to repeat the tape continuously from
beginning to end.
➞
(SV-645B/SV-643B)
Programme VPS/PDC is a system of telling the VCR when a
programme actually starts. Typically, when you want to record a
programme you will tell the VCR to start recording, probably, five
minutes before the advertised starting time of the programme and
to finish ten minutes or so after the programme is due to finish. So
even if the programme starts early or finishes late you will normally
still get to see what you wanted to record. However when live
programmes over-run or the day’s television schedule is changed
from that advertised, you may miss the desired programme which
may have been delayed or even cancelled. With VPS/PDC the VCR
will wait until the signal is sent to confirm the programme is
starting and the VCR will record the programme even if it is two or
more, hours late.
BONUS
1
2
3
4
5
Press MENU on the remote control.
Result: The programming menu is displayed.
PDC/VPS DEFAULT
:OFF
VIDEOPLUS EXTEND :OFF
PROG
OPTIONS INSTALL
BONUS
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
Press the corresponding
$,
❷
or
➛
,
❿
buttons to select the
CLOCK
EASY OPERATIONoption.
INTERVAL REPEAT : 5
EASY OPERATION
Press the OK button to select this option.
$❷
❿
END:MENU
Result:
The EASY OPERATIONmenu is displayed.
$
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
➞
(SV-640B)
Press the corresponding
$
or
❷
buttons, until the
REPEAT PLAYoption is selected.
➞
(SV-645B/SV-643B)
BONUS
To...
Press
➛
or ❿, until...
1
2
Press the MENU button on the remote control.
PDC/VPS DEFAULT
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
:OFF
Repeat play
ONis displayed.
BONUS
Press the corresponding
$,
❷
or
➛
,
❿
buttons to select the
PDC/VPS DEFAULT
VIDEOPLUS EXTEND :OFF
:OFF
EASY OPERATIONoption.
INTERVAL REPEAT : 5
Do not wish to repeat play
OFFis displayed.
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
3
4
Press the OK button to select this option.
Result:
The EASY OPERATIONmenu is displayed.
$❷
❿
END:MENU
6
On completion, press MENU twice to exit the menu.
INTERVAL REPEAT : 5
Press the corresponding
$
or
❷
buttons, until the
$❷
❿
END:MENU
PDC/VPS DEFAULToption is selected.
5
6
Press ❿ꢀbutton to select ONin PDC/VPS DEFAULToption.
Interval Repeat Play
➞
(SV-640B)
On completion, press MENU twice to exit the menu.
You can set Interval Repeat Play so that the cassette is repeated a
number of times according to a specified set interval.
BONUS
PDC/VPS DEFAULT
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
:OFF
PROG
OPTIONS INSTALL
BONUS
1
2
3
Press MENU on the remote control.
Result:
The programming menu is displayed.
CLOCK
INTERVAL REPEAT : 5
Press the corresponding
$,
❷
or
➛
,
❿
buttons to select the
EASY OPERATION
EASY OPERATIONoption.
$❷
❿
END:MENU
$
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
Press the OK button to select this option.
Result:
The EASY OPERATIONmenu is displayed.
➞
(SV-645B/SV-643B)
4
5
Press the corresponding
NO. OF INTERVAL REPEAToption is selected.
$
or
❷
buttons, until the
BONUS
To...
Press
❿, until...
PDC/VPS DEFAULT
VIDEOPLUS EXTEND :OFF
:OFF
Interval Repeat Play
5, 10, 15 is displayed.
(choose an interval repeat of
5, 10 or 15 times)
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
INTERVAL REPEAT : 5
Cancel Interval Repeat Play
OFFis displayed.
$❷
❿
END:MENU
6
7
On completion, press MENU twice to exit the menu.
To select Interval Repeat Play during playback, press the
INPUT/REPEAT button at the desired start point.
➞
(SV-640B)
Result:
“INTERVAL REPEAT SETTING” is displayed.
BONUS
Press the INPUT/REPEAT button one more time at the desired
end point.
PDC/VPS DEFAULT
:OFF
:OFF
:OFF
AUTO POWER OFF
REPEAT PLAY
NO. OF
Result:
The tape is automatically rewound to the start point.
INTERVAL REPEAT” is displayed.
“
INTERVAL REPEAT : 5
$❷
❿
END:MENU
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
➞
Connecting an RCA Audio/Video Input Cable
(SV-645B Only)
VIDEOPLUS+ EXTEND (SV-645B/SV-643B Only)
➞
GB
To prevent delays or over-runs the VCR has a function called
Videoplus EXTEND allowing you to extend the recording time by
up to 60 minutes.
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
PROG
OPTIONS INSTALL
BONUS
➞
Only use if PDC is not available or set to OFF.
EJECT
STANDBY/ON
VIDEO
CLOCK
Examples: ➞ You wish to copy a video cassette with the help of a
1
2
Press the MENU button on the remote control.
Press the corresponding or buttons to select the
EASY OPERATIONoption.
Press the OK button to select this option.
second VCR (see page 40).
EASY OPERATION
L-AUDIO-R
➞
➞
You wish to play back and/or copy pictures taken
with a camcorder (see page 40).
$,
❷
➛
,
❿
AUX
$
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
1
3
4
5
6
➞
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
Result:
The EASY OPERATIONmenu is displayed.
BONUS
Press the corresponding
VIDEOPLUS EXTENDoption is selected.
$
or
❷
buttons, until the
PDC/VPS DEFAULT
VIDEOPLUS EXTEND :OFF
:OFF
➞
Make sure that both the television and the VCR are
switched off before connecting the cables.
EJECT
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
STANDBY/ON
VIDEO
Press or buttons to set the Videoplus EXTEND time by
increments of 10 minutes.
➛
❿
INTERVAL REPEAT : 5
L-AUDIO-R
To turn off, press or buttons repeatedly until OFFshows.
➛
❿
1
2
3
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the VCR.
$❷
❿
END:MENU
AUX
3
3
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
Using the Tape Counter
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the VCR.
The tape counter:
➞
Take care to respect the colour coding of the left and right
channels.
➞
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
➞
➞
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
➞
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
0:00:00
1
2
Insert a cassette in your VCR.
To set the tape counter to zero at the beginning of a sequence:
➞
➞
Press DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
CLR/RST
A.TRK
F.ADV
INDEX
2
3
When you are ready,
IPC
INPUT
➞
➞
➞
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿
➞
REPEAT
.
AUDIO
DISPLAY
2
TRK
PROG
➞
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
➞
Once to display the current function, programme
number, recording speed, date, time and counter
➞
➞
Twice to display the counter only
Three times to display the time remaining on the
cassette
➞
Four times to clear the display
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Assemble Edit Function
Auto Power Off
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
GB
➞
(SV-645B/SV-643B)
1
2
3
Insert the cassette to be edited in your VCR.
BONUS
1
2
3
4
5
Press MENU on the remote control.
PDC/VPS DEFAULT
VIDEOPLUS EXTEND :OFF
:OFF
Press the ❿ll button to start playback.
Result:
The programming menu is displayed.
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
When you reach the position from which you wish to start the new
Press the corresponding
$,
❷
or
➛
,
❿
buttons to select the
recording, press the ❿ll button.
EASY OPERATIONoption.
INTERVAL REPEAT : 5
2
F.ADV
REC
MENU
4
5
Press the
(
) button again as often as necessary to
F.ADV
$❷
❿
END:MENU
Press the OK button to select this option.
advance frame by frame, until the exact recording position is
located.
Result:
The EASY OPERATIONmenu is displayed.
➞
(SV-640B)
OK
While the VCR is in still mode, hold the REC button down for a
while to activate the Assemble Edit function.
Press the corresponding
$
or
❷
buttons, until the
AUTO POWER OFFoption is selected.
BONUS
Result:
Record symbol flashes in the display.
PDC/VPS DEFAULT
AUTO POWER OFF
REPEAT PLAY
NO. OF
:OFF
:OFF
:OFF
Press the
interval.
❿
button, until you select the time of Auto Power off
6
Select the source from which you wish to record by pressing:
➞
➞
The PROG (
$
or
❷
) buttons for television channels
OFF 2HOUR 3HOUR
INTERVAL REPEAT : 5
➞➞
The INPUT button for the AV1, AV2 or AUX (SV-645Bonly)
input sources
6
On completion, press MENU twice to exit the menu.
$❷
❿
END:MENU
7
8
Press the ❿ll button to start recording.
When you have finished recording, press
.
➞
➞
Child Door Lock System (SV-643B/SV-640B Only)
Recording from Another VCR or Camcorder
With this mechanism you can prevent children from harming
themselves or the VCR. It stops fingers and small articles from
entering your VCR.
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
STANDBY/ON
EJECT
REW PLAY
F.F
PROG
REC
STOP
➞
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to be copied, to the
appropriate SCART audio and video input connectors on the rear
ECO Mode-Reducing Standby power consumption
of your VCR.
You can also use a RCA audio and video cable to connect the
AUX input on the front of your VCR. (SV-645B only)
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
➞
OPTIONS
INSTALL
PROG
Useful, for example, when you are away from the house on holiday.
2
3
Insert a blank cassette in your VCR.
It saves actually turning the VCR off.
CLOCK
BONUS
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
1
2
3
4
5
Press MENU on the remote control.
USER SET
Result:
The programming menu is displayed.
REC
MENU
4
Press the INPUT button to select the appropriate input on your
VCR:
Press the corresponding
$,
❷
or
➛
,
❿
buttons to select the
$
❷ꢀꢀ➛❿ꢀꢀ OK
END:MENU
6
USER SEToption.
➞
➞
AV1 or AV2 for the SCART input
AUX for the RCA input (SV-645B only)
➞
Press the OK button to select this option.
Result: The USER SETmenu is displayed.
OK
OPTIONS
5
6
7
Start playing back the cassette to be copied.
OSD
TAPE SELECT
COLOUR SYSTEM
FORMAT 16:9
NICAM
ECO. MODE
IPC
:ON
Press the corresponding
is selected.
$
or
❷
buttons, until the ECO. MODE
:E180
:AUTO
:AUTO
:ON
Hold REC down for a while to start recording on your VCR.
Press the ❿ꢀbutton to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the STANDBY/ON button
again the display panel will reappear.
When you have finished recording, press
on both VCRs.
➞
:OFF
:ON
END:MENU
➞
If you wish to view the cassette being copied:
$❷
❿
➞
Your VCR must be connected as usual to the
television (see page 11 for further details)
6
On completion, press MENU twice to exit the menu.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Problems and Solutions
GB
Before contacting the Samsung after-sales service, perform the following simple checks.
Design and specifications are subject to change without notice.
Problem
Explanation/Solution
No power
➞
➞
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
Format
Heads
VHS PAL standard
Video: 4 rotary heads
You cannot insert a video cassette
➞
A video cassette can only be inserted with the window
side up and the safety tab facing you.
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
STANDARD I-NICAM STEREO
FM azimuth recording
PAL: Down converted subcarrier phase shifted direct recording
NTSC PB on PAL TV
SP 23.39 mm/sec
LP 11.69 mm/sec
SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape)
About 60 sec in REW with E-180
The television programme was not recorded
➞
➞
➞
Check the VCR aerial connections.
Is the VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Television system
Luminance
Colour system
Timer recording was unsuccessful
➞
➞
➞
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
Tape speed
Recording/playback time
REW time
No playback picture or the picture
is distorted
➞
➞
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
VIDEO
Input
Output
Signal-to-noise ratio
Horizontal resolution
0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Better than 43 dB (SP)
➞
➞
➞
Noise bars or streaks on playback
Press the TRK
(
or
)
buttons to minimize this effect.
More than 240 lines
When the
during playback, the still picture
has severe “noise bars” streaks
❿
II
button is pressed
A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK (
SLOW motion to minimize this effect.
or
) buttons during
AUDIO
Input
Output
Wow and flutter (WTD)
Signal-to-noise ratio
Frequency response
-8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced
0.4% max (SP)
68 dB min (IHF A filter)
20Hz - 20kHz
Video Head Cleaning
➞
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the VCR test
pattern your TV does not find the test pattern
or the pattern when found suffers from
interference, it may be due to the VCR output
channel clashing with the normal TV
transmissions in your area. To prevent this
you will need to change the VCR output
channel in the following way
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the VCR.
2. Carry out the instructions “Tuning Your Television for the VCR”
(see page 14).
3. Carry out the instructions “Setting the VCR output Channel”
(see page 16), move the channel number several channels
down from the original setting. (example: from 60 to 57).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the VCR.
Power requirement
Power consumption
Operation temperature
Operation humidity
Weight
230V (AC 50-60 Hz)
Approx. 17 watts
41°F-104°F (5°C-40°C)
10%-75%
2.8 Kg (net)
360 x 94 x 240 mm
Dimensions (WxHxD)
5. Re-tune your TV to the VCR again by following instructions
“Tuning Your Television for the VCR” (page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
➞
➞
➞
The model and serial number on the rear of your VCR
The warranty information
A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG ELECTRONICS (UK) LTD
AUTHORISED SERVICE CENTERS
In the event of warranty service being required, please contact your retailer first. If they cannot provide service, please contact
your nearest service centre listed below. Service facilities are return to base, however some agents may provide an in-home
service (there may be a cost for call out). Please refer to your warranty card or retailer for terms and conditions of the warranty.
AVON
ESSEX
LONDON
WILLESDEN
WEST MIDLANDS
DUDLEY
BRISTOL
GOGGLEBOX TV
TEL: 01275 838083
WICKFORD
CENTRAL SERVICE
TEL: 01268 766333
ATLANTIC ELECTRIC
TEL: 0181 451 6155
J S STOREY ELECTRICAL
TEL: 01384 455608
WALSALL
BEAVER ELECTRONICS
TEL: 01922 725554
WARLEY
MERRIVALE TV SVCS
TEL: 0121 544 6273/6350
SAMSUNG EUROPEAN BLOC WARRANTY
MID GLAMORGAN
BRIDGEND
BERKSHIRE
READING
MANCHESTER
ASHTON UNDER LYNE
VIDEOTECH UK
TEL: 0161 308 4092
NORTHENDEN
G H SUMNER LTD
TEL: 0161 998 2705
BRIDGEND SERVICE
TEL: 01656 663463
A & W SOUND & VISION
TEL: 01734 872000
MAIDENHEAD
J F ASSOCIATES
TEL: 01628 25709
WARGRAVE
GLOUCESTERSHIRE
TEWKESBURY
SWITCH ELECTRONICS
TEL: 01684 850063
WESTON-SUB-EDGE
PROFESSIONAL ELECTRONIC
TEL: 01386 841773
WILTSHIRE
SWINDON
COLORITE TV LTD
TEL: 01793 641038
MERSEYSIDE
J F ASSOCIATES
TEL: 01734 401525
ELLESMERE PORT
H & H VIDEO & TV
TEL: 0151 357 1011
LIVERPOOL
P & A AUDIO VIDEO LTD
TEL: 0151 924 7287
CAMBRIDGESHIRE
WORCESTERSHIRE
DRY DRAYTON
WORCESTER
THE HI FI CAR RADIO REPAIR
TEL: 01905 26623
HAMPSHIRE
DRAYTON ELECTRONICS
TEL: 01954 211330
PETERBOROUGH
DEEPING TV SVCS
TEL: 01778 343831
FAREHAM
SOUND & VISION
TEL: 01329 286551
FARNBOROUGH
ICTV
TEL: 01252 510118
PORTSMOUTH
ICTV
TEL: 01705 653654
SOUTHAMPTON
OLYMPIC TV & AUDIO
TEL: 01703 703401
MIDDLESEX
SOUTH YORKSHIRE
HAYES
A & A REPAIRS
TEL: 0181 561 2900/4104
SHEFFIELD
GRAPHIC ELECTRONIC SVCS
TEL: 0114 256 2791
BARNSLEY
ALTRA
TEL: 01226 207434
CHESHIRE
CHESTER
NORFOLK
H & H VIDEO & TV
TEL: 01244 379579
WARRINGTON
W L ELECTRONICS
TEL: 01925 764387
AYLESHAM
CORTONS ELECTRICAL
TEL: 01263 733391
WATTON
JULIAN HORN
TEL: 01953 881440
NORTH YORKSHIRE
YORK
DBS SERVICE CENTRE
TEL: 01904 789789
HEREFORD
HEREFORD
J P MICRO SVCS
TEL: 01432 356353
CORNWALL
BUDE
NORTHAMPTONSHIRE
H B H WOOLACOTTS
TEL: 01288 352269
LAUNCESTON
H B H WOOLACOTTS
TEL: 01566 772096
NEWQUAY
GREENBANK ELECTRONICS
TEL: 01637 880576
WADEBRIDGE
H B H WOOLACOTTS
TEL: 01208 816155
KETTERING
INTEGRATED SVCS
TEL: 01536 516475
WEST YORKSHIRE
BRADFORD
HERTFORDSHIRE
GRAPHICK ELECTRON
TEL: 01274 862267
HUDDERSFIELD
GRAPHIC ELECTRONICS
TEL: 01484 451045
ILKLEY
BALDOCK
TECHNICAL REPAIR SVC
TEL: 01462 491144
MARKYATE
TELETECH SVCS
TEL: 01582 841862
OXFORDSHIRE
BANBURY
HITECH
TEL: 01295 267415
BOTLEY
SPECTRUM ELECTRON
TEL: 01865 250199
R BEAUMONT
TEL: 01943 607021
NORTH HUMBERISDE
GOOLE
HEADLAND ELECTRCS
TEL: 01977 661223
CHANNEL ISLANDS
SHROPSHIRE
CUMBRIA
GUERNSEY
TELFORD
W OWEN
TEL: 01952 613818
BARROW IN FURNESS
KENNETH GARDNER
TEL: 01229 821202
SEARLE AUDIO
TEL: 01229 839692
PENRITH
TELESKILL LTD
TEL: 01481 56508
JERSEY
ALTERNATIVE ELECT
TEL: 01534 68277
ISLE OF WIGHT
AUDIO VISION SVCS
TEL: 01983 752023
SOUTH HUMBERSIDE
GRIMSBY
RAYNERS SUPERSTORE
TEL: 01472 358766
SOMERSET
TAUNTON
ARMTECH ELECTRONICS
TEL: 01823 279401
YEOVIL
M J THOMAS
TEL: 01935 477255
KENT
CANNAN & BROWN
TEL: 01768 864829
CANTERBURY
BARRETTS OF CANTERBURY
TEL: 01227 766582
DARTFORD
BUDGET REPAIR CENTRE
TEL: 01322 227668
MAIDSTONE
DEVON
NORTHERN IRELAND
HOLSWORTHY
CO ARMAGH
CRAIGAVON TV SVCS
TEL: 0762 326119/322505
H B H WOOLACOTTS
TEL: 01409 253280
NEWTON ABBOT
TELLI-SCOPE ELECTRONICS
TEL: 01626 63907
PLYMOUTH
ARGYLE TV & VIDEO
TEL: 01752 779933
CTV ELECTRONICS
TEL: 01752 350950
STAFFORDSHIRE
STOKE ON TRENT
TELEFAULTS (S.O.T.) LTD
TEL: 01782 813757
AVERY ELECTRONICS
TEL: 01622 682138
EIRE
CO CORK
LANCASHIRE
BLACKPOOL
SUFFOLK
TVAE REPAIRS
TEL: 00353 21 273457
IPSWICH
GGN LTD
TEL: 01473 744300
KENNETH GARDNER
TEL: 01253 824047
LANCASTER
KENNETH GARDNER
TEL: 01524 64468
ROCHDALE
GRAMPIANS
FRASERBURGH
SURREY
RODGERS ELECTRICAL
TEL: 01346 518540
WALLINGTON
DORSET
SERVICECARE
TEL: 0181 669 1145
HORLEY
D K AUDIO VISUAL SVCS
TEL: 01293 786459
BOURNEMOUTH
M & G ELECTRONICS
TEL: 01202 523771
CTV SERVICES
TEL: 01706 654983
HIGHLANDS
ULLAPOOL
R & R ELECTRONICS
TEL: 01854 612608
LEICESTERSHIRE
DURHAM
DURHAM
LEICESTER
SOUNT & VISION CENTRE
TEL: 01162 730444
EAST SUSSEX
SEAFORD
LEE TECH SVCS
TEL: 0191 371 1300
DARLINGTON
GAZE ELECTRONICS
TEL: 01325 482344
LOTHIAN
EDINBURGH
RETEC AUDIO & VISUAL
TEL: 0131 478 7779
CLEARVIEW RENTAL & RELAY
TEL: 01323 898989
EASTBOURNE
STARTEC SVCS
TEL: 01323 412012
LINCOLNSHIRE
BRANSTON
STUART WALLACE
TEL: 01522 791496
STRATHCLYDE
DYFED
ESSEX
GLASGOW
DSC ELECTRONICS
TEL: 0141 941 3711
CARMARTHEN
LONDON
TYNE & WEAR
ADVANCE CONSUMER
TEL: 01267 236143
ST CLEARS
BEN EVANS & SON
TEL: 01994 231015
HIGH HOLBORN
NEWCASTLE UPON
TYNE
M SINGH RADIO & TV
TEL: 0191 226 0446
BERRYS OF HOLBORN
TEL: 0171 405 1157
TAYSIDE
DUNDEE
ANCRUM ELECTRONICS
TEL: 01382 454511
LONDON
ARMSTRONG SERVICES
TEL: 0181 523 0023/0051
WEST EALING
WEST MIDLANDS
COVENTRY
D & J HENRY
TEL: 01203 431393
BRAINTREE
GWYNNE TV & ELECTRICAL
TEL: 01376 322567
BABBER ELECTRONICS
TEL: 0181 579 6315
44
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS APPLIANCE IS DISTRIBUTED BY
ELECTRONICS
AC68-01299A
Download from Www.Somanuals.com. All Manuals Search And Download.
|