Samsung Telephone OfficeServ User Guide

Pickup................................................................................................................................................ 76

Repeating the Last Action Once a Call is Reconnected ..................................................................... 76

ANNEX A. Retrieving the Call Log

Log Viewer Star t ..................................................................................................................................................7 8

Log Viewer Menus...............................................................................................................................................7 9

Retrieving Logs...................................................................................................................................................8 0

Retrieving Statistical Logs ................................................................................................................. 80

Retrieving All Logs............................................................................................................................. 81

Retrieving Inbound Calls Logs .......................................................................................................... 82

Retrieving Outbound Calls Logs ....................................................................................................... 83

Retrieving Trunk Calls Logs .............................................................................................................. 83

Retrieving Station Calls Logs ............................................................................................................ 84

Retrieving DID Logs .......................................................................................................................... 84

Retrieving CID Logs .......................................................................................................................... 85

Retrieving Logs for Each Transfer Destination.................................................................................. 85

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

ANNEX B. Importing/Exporting Excel Files

Importing Data in an Excel File Format Into a Phone Boo k ..........................................................................8 6

Exporting Phone Book Data to an Excel File....................................................................................................9 0

ABBREVIATION

SOFTWARE LICENSE AGREEMENT & LIMITED WARRANTY

9 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

INTRODUCTION

Introduction

This manual describes the functions of the OfficeServ Operator, that include installation,

service settings, and operations.

Document Content and Organization

This document consists of five chapters and two annexes as follows:

CHAPTER 1. Introduction

This chapter provides an overview of the OfficeServ Operator and describes its functions and

system requirements.

CHAPTER 2. OfficeServ Operator Installation

This chapter describes preparations before the OfficeServ Operator installation and

procedures for installing the OfficeServ Operator.

CHAPTER 3. Description of the OfficeServ Operator

This chapter describes the menus and windows of the OfficeServ Operator.

CHAPTER 4. OfficeServ Operator Settings

This chapter describes the method of changing phone lines, setting various options,

processing messages, and adding an originating Busy Lamp Field (BLF) group by using the

OfficeServ Operator.

CHAPTER 5. Call Control

This chapter describes the method of using the general and additional system functions by

using the call control buttons, mouse, keyboard, or popup menus.

ANNEX A. Retrieving the Call Log

This chapter describes the method of viewing a call log provided by the OfficeServ Operator.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

ANNEX B. Importing/Exporting Excel Files

This chapter describes

Method of importing Excel data into a phone book.

Method of exporting phone book data into an Excel file.

Conventions

The following special paragraphs are used in this document to point out information that must

be read. This information may be set-off from the surrounding text, but is always preceded by

a bold title in capital letters.

CHECKPOINT

Provides the operator with checkpoints for stable system operation.

NOTE

Indicates additional information as a reference.

References

iDCS 100/500 R2 General Description Guide

The iDCS 100/500 R2 General Description Guide describes the main functions of the systems,

product descriptions, cabinet configuration, board description.

iDCS 100/500 R2 Installation Manual

The iDCS 100/500 R2 Installation Manual describes system hardware and installation method.

iDCS 100/500 R2 Programming Manual

The iDCS 100/500 R2 Programming Manual describes MMC list and how to set MMC.

OfficeServ Link User Guide

The OfficeServ Link User Guide describes the functions of the OfficeServ Link and method of

installing or using the OfficeServ Link.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

CHAPTER 1. Introduction to the

OfficeServ Operator

The OfficeServ Operator is a Windows based operator console for the Samsung iDCS

100/500 R2 products.

It provides a complete call control facility for operators and reception staff within the company,

and provides an easy to use and intuitive interface for handling calls.

Multiple operators can be installed in a single node enterprise and individual operators can

manage the whole telephone system or individual work groups if required.

The key features are as follows:

Configurable Busy Lamp Fields which can show the whole company, or individual

departments or workgroups.

Clear indication of incoming calls, active calls and held calls.

Mouse or keyboard operation, with “drag and drop” functionality

Easy to use buttons for advanced functions such as conference and paging.

OfficeServ Link

The OfficeServ Link application is a software application that links the Samsung iDCS

telephone system to a Windows based computer.

The Link enables other software applications (both Samsung and third party) to interface with

the Samsung iDCS product line of telephone systems, and allows these applications to add

additional functions and capabilities to the system.

The Link application includes a licensing module which must be used to register and authorize

which applications are running on the system and the total number of users.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Overview

Introduction to the OfficeServ Operator

The OfficeServ Operator is a PC-based console, which is a telephony application that

interfaces with the iDCS 100/500 R2 systems. Once the operator receives a request for call

operation from the iDCS system the operator connects or transfers the call using the

OfficeServ Operator.

For instance, when a caller dials a business phone, the operator answers the call, and

transfers it to the requested number through the iDCS system.

The OfficeServ Link transfers events between the iDCS 100/500 R2 systems and OfficeServ

Operator.

Network configuration diagram of the OfficeServ Operator:

OfficeServ Operator #1

TCP/IP

Intranet

OfficeServ Operator #2

•

iDCS

OfficeServ Link

OfficeServ Operator #n

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

System Requirements

The PC where the OfficeServ Operator will be installed should meet the requirements below:

Category

Specifications

Windows 2000 Series(Professional, Server, and Advanced

Server), Windows XP Professional

Operating System

Pentium 4 / 1.6 GHz or higher

Processor(CPU)

(A dual Pentium processor is recommended for the system with

more than 300 devices.)

Memory

512 MBytes or higher

1024×768 or higher

100/10 Base-T

Monitor Resolution

Network Interface Card

Functions of the OfficeServ Operator

The OfficeServ Operator performs the functions described below:

Call Processing by Using the Keyboard/Mouse

The user can use the keyboard or mouse to operate calls. If the operator answers a call by

lifting the handset, the operator can use the OfficeServ Operator and phone by turns when

required.

Drag-and-Drop Call Processing

The operator can drag and drop a call on the station icon to transfer the call. For detailed

information about the drag and drop, refer to the sections about drag-and-drop call processing

in this manual.

Call Processing by Call Status

Calls are displayed in the <Incoming Calls> window, <Active Calls> window, and <Held Calls>

window depending on call status. Caller information such as a caller ID is displayed in each

window. Particularly in the <Active Calls> window, the caller information stored in the database

is also displayed.

Real-time Display of Station Status

The station status registered with Busy Lamp Field (BLF) is displayed in the format of icons in

real-time so that the user can easily check station status such as busy, dialing, and Do Not

Disturb (DND).

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Display of the OfficeServ System Information

Direct Inward Dialing (DID), Calling Line Identification Presentation(CLIP), station groups,

speed dial numbers, and the Direct Trunk/Direct Station (DT/DS) button information of an

operator station, which are set in the OfficeServ system, are displayed. The DID information is

displayed in the DID list. The station groups, speed dial numbers, and DT/DS information are

displayed in the BLF list.

Online Support and Message Exchange

The <Information> window of the OfficeServ Operator gives the user useful information to help

the user acquire knowledge of the OfficeServ Operator application. The OfficeServ Operator

allows the user to exchange messages with another OfficeServ Operator user or an OfficeServ

Call user.

Call Log

The call logs of the OfficeServ Operator are maintained for all the incoming/outgoing calls

made while operating the application. A call log includes the Notes field where data on a

specific call are recorded. Use the log view to view a call log and search the log by categories.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

CHAPTER 2. OfficeServ Operator Installation

Preparations Before Installation

Preparations before installing the OfficeServ Operator are described below:

OfficeServ Licensing

To operate the OfficeServ Operator, an available license should be registered to OfficeServ

Link. The license number is granted by the reseller of the OfficeServ Operator or a Samsung

reseller and should be entered into the PC that operates the OfficeServ Link. If any license

number is not registered, the OfficeServ Operator will not operate properly.

Checking the Specifications of the PC where the OfficeServ Operator will be Installed

Check the PC requirments where OfficeServ Operator will be installed. For detailed

information about the system requirements, refer to ‘System Requirements’ of ‘CHAPTER 1.

Introduction to the OfficeServ Operator’.

How to Install

Before you run setup, locate the IP address of the PC on which the OfficeServ Link application is

installed, you will need this information to complete the installation of OfficeServ Operator.

OfficeServ Link distributes the messages from the telephone system to each client. You may

need to ask your system administrator for this IP address.

Insert the OfficeServ Applications CD-ROM and follow the onscreen menus to locate the

OfficeServ Operator setup link.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Procedures for Installing the OfficeServ Operator

Follow the steps below to set up the OfficeServ Operator:

Double-click the execution file of OfficeServ Operator installation CD, or downloaded

OfficeServOperator.exe to see the installation screen below:

Click [Next>].

Read the Software License Agreement from the window below carefully, and click [Yes]:

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Select the destination folder for the OfficeServ Operator installation, and click [Next>].

By default, the folder for the program installation is ‘C:\..\Samsung Electronics\OfficeServ

Operator’. If the user wants to install the program in another folder, click [Browse...] to

select a folder.

Enter the name of the program folder (e.g. OfficeServ Operator) in the window below, and

click [Next>].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Once the window below appears, click [Edit...] to modify the information about phone

numbers or modem options: The window that displays phone numbers and modem

options depends on the user’s operating system.

Once the window below appears, fill out each field and click [OK].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parameter

General

Description

Allows the user to select the country that is using the OfficeServ

Operator.

Allows the user to enter an area code except for ‘0’.

The user must enter the numbers set in the iDCS 100/500 R2

system.

Area Code Rules

Calling Card

Select one of tone dialing and pulse dialing.

Once the window below appears, enter the IP address of the OfficeServ Link in [Server IP

Address] and click [OK]. If an invalid IP address is entered, the OfficeServ Operator will

not be connected to the OfficeServ Link. As for [Server Port No] and [Trace Type],

maintain the default settings. For detailed information about each parameter, refer to the

‘OfficeServ Link User Guide’.

Connection Settings between the OfficeServ Operator and OfficeServ

Link: To properly connect the OfficeServ Operator with the OfficeServ Link,

CHECK

the IP address of the OfficeServ Link must be entered accurately.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Click [Finish] from the window below to terminate the OfficeServ Operator setup.

Once the OfficeServ Operator setup is completed, a shortcut icon for the OfficeServ Operator

is created on the desktop of the PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

CHAPTER 3. OfficeServ Operator Description

This chapter describes the menus and windows of OfficeServ Operator.

OfficeServ Operator Menus

The OfficeServ Operator menus include File, Call, Tools, View, and Help.

File: Allows the user to start or exit the OfficeServ Operator application.

Call: Allows the user to make a call.

Tools: Allows the user to use message functions through the OfficeServ Link or create a

phone book by using an Excel file, retrieve the call log, or set the options of the OfficeServ

Operator.

View: Displays the status of calls in the <Active Calls> window, <Incoming Calls> window,

<Held Calls> window, <Information> window, or Status Line.

Help: Displays Help for using the OfficeServ Operator application and version information

of the OfficeServ Operator.

Each Window of the OfficeServ Operator Main Window

The main window of the OfficeServ Operator consists of the <Information> window, <Incoming

Calls> window, <Active Calls> window, <Held Calls> window, <Call Button> window, <DID>

window, <BLF> Window, and Status Line.

Starting the OfficeServ Operator

Follow the steps below to start the OfficeServ Operator.

Double-click the ‘OfficeServ Operator shortcut icon’ on the desktop where the OfficeServ

Operator is installed or select [Start]Æ[Programs(P)]Æ[OfficeServ Operator] to see the

initialization screen below:

When running the OfficeServ Operator for the first time after setting up the OfficeServ

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Operator, the window that allows the user to set a station number during initialization

appears as shown below:

Select an extension number to be used from the OfficeServ Operator and click [OK].

Initialization Process

The initialization process means that the OfficeServ Operator downloads the

NOTE

data required to operate the OfficeServ Operator from the iDCS system

through the OfficeServ Link. It takes 1 to 5 minutes to download the data

depending on the system configuration.

Main Window

Once the initialization ends, the <OfficeServ Operator> main window is displayed as shown

below:

Information Window

Active Calls window

Incoming Calls

window

Held Calls window

Call Button window

DID window

Busy Lamp Field

Status Line

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Each window of the <OfficeServ Operator> main window is described below:

Window

Function

Helps the OfficeServ Operator users learn the OfficeServ Operator by

giving the users necessary useful information. Also, displays the

messages received from other station subscribers.

Information

Incoming Calls Displays the calls connected to the OfficeServ Operator in sequence.

Displays a call connected to the operator. Also, displays the customer

Active Calls

name, company, title, phone number, and the information on the recent

called party from the stored customer database. The user can take notes

of calls on hold or calls.

Displays the calls on hold in sequence. The <Held Calls> window

displays the saved/restored calls.

Held Calls

Call Button

This window includes the call control button required to operate the

OfficeServ Operator and the input field for a destination number. The user

can adjust the displayed buttons.

Displays the DID information set in the iDCS system. The DID information

is displayed in the <Incoming Calls> window, <Active Calls> window, and

<Held Calsl> window as well ; thus, the information can be used very

usefully for supporting multiple companies or departments.

DID

Displays the devices of the OfficeServ Operator in the format of cards or

lists. If the station port is the same as the C.O.line port, this window will

show the current status of the device.

The device types are as follows:

BLF

- Station port/C.O.line port of the iDCS system.

- Member of the station group

- Speed dial number of the operator station

- DT/DS button set in the operator station

- A random number set by the user

Displays the current status of the user station such as voice message

number, whether voices are recorded or not, Do Not Disturb (DND),

message list (list of stations where messages are left), call back (busy

station where a call is reserved), and ring plan setting status

Status Line

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Menus

The menus of the OfficeServ Operator are described below:

Main

Submenu

Restart

Description

Restarts the OfficeServ Operator.

Terminates the OfficeServ Operator.

Controls calls.

File

Exit

Dial~Page

De-allocate the

disconnected calls on

the operator line

Deletes all the disconnected calls from the operator

lines.

Initializes the operator lines used by the OfficeServ

Operator. Even if the operator lines are initialized,

the actual port status of the operator lines is not

changed.

De-allocate All Calls

on operator line

Call

De-allocate

Deletes all the disconnected calls from all the lines.

disconnected Calls of

all lines

Initializes all the lines (station and C.O.Line). Even if

all the lines are initialized, the port status of the

iDCS system is not changed.

De-allocate All Calls

lines

Logs into the OfficeServ Operator to send/receive

messages to/from the OfficeServ Link.

Message Login

Send Message

Sends messages to another station. For details,

refer to ‘Message Processing’

Imports or exports an Excel file to be used by a

phone book. For details, refer to ‘Annex B.

Importing/Exporting Excel Files’.

Import/Export Excel

Files

Tools

Add Outgoing BLF

Group

Imports a phone number from a phone book and

adds the number to the incoming BLF group.

Allows the user to view the call log. For details,

refer to ‘Annex A. Retrieving the Call Log’.

Log Viewer

Runs the EasySet.

Open EasySet

Phone Lines

Options

Selects a line to be used in the OfficeServ Operator.

Sets the options of the OfficeServ Operator.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Main

Submenu

Refresh

Description

Refreshes and displays the status of calls displayed in the

<Active Calls> window.

Active View

Refresh

Incoming

View

Refreshes and displays the status of calls displayed in the

<Incoming Calls> window.

Refresh Held

Calls

Refreshes and displays the status of calls displayed in the

<Held Calls> window.

View

Clear Info

View

Clear the messages displayed in the <Information> window.

Put the mouse on the BLF device to see the phone numbers,

names, and notes in the format of balloon help.

BLF Tooltip

Status Bar

Displays the status of the operator station.

Displays the OfficeServ Operator Help.

Contents and

Index

Help

User’s Guide

About

Displays the manual for using the OfficeServ Operator.

Displays the version information of the OfficeServ Operator.

Information Window

The information window gives OfficeServ Operator users necessary information. This window

also displays messages received from other station subscribers.

The figure below shows the example of the information, which is displayed in the

<Information> window when a new call is connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Incoming Calls Window

The figure below shows the calls connected to the OfficeServ Operator in sequence.

The columns displayed in the <Incoming Calls> window are described below:

Column

CID

Description

Caller Identification. Phone number and name of the caller

Phone number and name of a call connected to the DID

Elapsed time since call connection

DID

Duration

Details

Other information

Display of Columns in Each Window

The columns displayed in each window can be set in [Tools]Æ[Options]

NOTE

Æ[Columns].

Active Calls Window

Once the calls displayed in the <Incoming Calls> window are answered or outgoing calls are

connected, the connected calls (except for forwarded calls or calls on hold) are displayed in

the <Active Calls> window as shown below: The <Active Calls> window imports the customer

information stored in the customer database and displays the name, company, title, and

representative phone number of the caller and the information and three phone numbers of

the recently called party.

The user can take notes of calls in [Note] and view the notes for calls from the data on calls on

hold or log view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

The columns displayed in the <Active Calls> window are described below:

Column

Description

CID

Phone number and name of the caller

Phone number and name of a call connected to the DID

Call status

DID

State

Duration

Elapsed time since call connection

Other information

Details

Caller Information

Information about the caller

Recently Forwarded To Recently forwarded phone number (up to 3)

Using the caller information and recently forwarded phone number

To use the caller information and recently forwarded phone number, select

[Contact Info.] of [Active Calls] from the [Columns] tab of [Options].

NOTE

Modifying the Caller Information

Right-click on the <Active Calls> window and select [Save Contact] to save or modify and

save the caller information.

Only if the <Active Calls> window is in a conversation phase and information exists in [Name]

and [Tel No.], the [Save Contact] menu will be enabled.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Saving New Customer Information

To save new customer information, enter an extension number or external phone number in

[Tel No.]. Select the [Save Contact] menu to see the window below:

Select the table to save and click [OK]. Create a new table. Select the checkbox of [New],

enter the table name, and click [OK] to save the information in the table.

Separator of the Phone Number

When entering an external phone number, all of the country code-area code-

NOTE

phone number (e.g. : 1-214-555-1212) must be entered. Separate the

country code from the area code by using ‘-’.

When entering a number of less than four digits without ‘-’, the number is

saved in [Extension Number]. An external phone number is saved in

[Business Phone]. If the saved number is the same as the number of an

incoming/outgoing call, the external phone number saved in [Business

Phone] will be displayed in [Phone Number].

If only an extension number is saved, ‘Country Code-Area Code-’ will be

displayed in [Phone Number].

Using the Recently Forwarded Number

The list of the recently forwarded numbers shows three different numbers whose forwarding

has been attempted. Also, if the recently forwarded number is an extension number, the

station status will be displayed in the format of an icon. The icon for status display is the same

as the one in the <BLF> window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Select a number of the list of the recently forwarded numbers and click the [T] button at the

right of the window to forward a call to the number.

Using the Recently Forwarded Number

To use the recently forwarded number, the caller information must be

NOTE

displayed. If caller information does not exist in the database, the recently

forwarded number will not be saved in the database and cannot be used.

Call Features

Right-click on the <Active Calls> window and select [Drop] to release a connected call.

Only if the <Active Calls> window is in a conversation phase , the call features menu such as

[Drop] will be enabled. Available call features are Drop, Complete Transfer, Callback, Leave

Message, Camp On and OHVA.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Held Calls Window

When an active call is on hold, the call will be displayed in the <Held Calls> window.

The columns displayed in the <Held Calls> window are described below:

Column

CID

Description

Phone number and name of the caller

DID

Phone number and name connected to the DID

Elapsed time since call hold

Duration

Note

Notes on call hold

Call Button Window

This window displays the input field for the destination number and call buttons required to

control calls in the OfficeServ Operator.

Press a number of the keyboard without putting the mouse cursor on [Destination] to see the

number entered in the [Destination].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

The call buttons are described below:

Button

Description

Dial

Answer

Drop

Hold

Unhold

Transfer, Toggle

Station Park

Orbit Park

Conference

Page

Camp On

Transfer to Voice Mail

Call Recording with Voice Mail

Callback

Leave Message

Redirect

Off Hook Voice Announcement (OHVA)

Complete Transfer

Redial

Reestablish

DID Window

The <DID> window imports and displays the DID information set in the iDCS system. Only the

selected DID is displayed in the DID columns of <Incoming Calls> window, <Active Calls>

window, and <Held Calls> window. Other calls are forwarded to the ‘DID call forwarding

number not being serviced’ set in the options.

Also, the DID information exists in the DID column of the <Active Calls> window. If a BLF

group is set in the DID, the <BLF> window will be automatically changed to the set BLF.

The user can select one of the DID list or Queue list from the options.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

The columns are described below:

Column

Description

Tel

DID number set in the system

DID name set in the system

Name

BLF

BLF group name that inter-works with the DID

Use of the Queue List

The Queue list is used for the operator program of the call center. Currently,

the list is not supported.

NOTE

DID Inter-Working BLF Group Settings

Click the BLF column of the DID to set the DID inter-working BLF group. Then, a combo box

that allows the user to select a BLF group appears as shown in the figure below:

Click [▼] of the combo box to select a BLF group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

BLF (Busy Lamp Field) Window

The <BLF> window shows that the device is being used. Also, this window displays the status

of the office users who use the iDCS system. OfficeServ Operator users can create the

desired BLF group by using the device information received from the system. The users can

set an environment for use by changing the names displayed in each device.

The BLF device is displayed in the format of a card, list, or number. Icons are displayed at the

left of phone numbers depending on device status. If the device of the selected BLF group is

more than 100, the device will be displayed only in the format of a list or number.

The BLF device in the format of a card displays the status of absent messages or voice

messages and notes. The device can be searched based on phone number, name, or note.

The BLF device in the format of a list displays the device status, phone numbers, and names.

The devices for the OfficeServ Operator consist of multiple groups. ‘*’ is displayed at the left of

the BLF group created by default.

Group

Description

*Total Station

*Total Trunk

*DTDS

Entire system station

Entire system C.O.line

DT/DS button set in the operator station

Speed dial button set in the operator station

*Speed

*Station Group

Number/Name

Station group selected optionally from the station groups of the

system

The user can add or modify a BLF group or device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Searching a BLF Group

The user can search a BLF group based on phone number, name, or note. When pressing

[F5] of the keyboard, the [Find] text field next to <Note> is focused in the window. Enter the

phone number, name, or note of the BLF the user wants to search and click the [Find] button

or [Enter] key to search the BLF.

Searching by Phone Number

Press [F5] of the keyboard and enter 0 to 9. Then, a phone number will be automatically

selected and a BLF device starting with the number will be searched and displayed. The

method of searching the ‘201’ device is described below:

Enter ‘2’. Then, a phone number is automatically selected and only the BLF device starting

with ‘2’ is displayed.

Enter ‘0’. Only the BLF device starting with ‘20’ is displayed.

Enter ‘1’. Only the BLF device starting with ‘201’ is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

When clicking the [Find] button or [Enter] key, the window focus moves to BLF ‘201’ and ‘201’

is entered in the destination box.

If multiple search destinations exist, use arrow keys.

Searching by Name

When pressing [F5] and entering characters except for 0 to 9, a name is automatically

selected and the BLF device starting with the character is searched and displayed. The

method of searching a name, ‘Suzy Beth Smith’ is described below:

Enter ‘R’. Automatically, a name is selected and the BLF device with a name starting with ‘R’

will be displayed.

Next, ‘Ro’. The BLF device with a name starting with ‘Ro’ will be displayed.

Enter ‘Rob’. The BLF device with a name starting with ‘Rob’ will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Click the [Find] button or [Enter] key. Then, the window focus moves to the BLF device with a

name of ‘Rob Wylie’. ‘202’, which is the phone number of ‘Rob Wylie’, is entered in the

destination field of the call button window.

If multiple search destinations exist, use arrow keys.

BLF Group Management

Creating the BLF Group

Put the mouse cursor and right-click on the list box of the <BLF> window and select the

[New Group] menu.

Enter the name of the BLF group to be created in the window below and click [OK] to create a

new group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Deleting the BLF Group

Select a BLF group to be deleted from the list box of the <BLF> window and right-click on the

group to select the [Delete] menu.

Once the window that prompts the user to delete the group appears, click [Yes] to delete the

selected BLF group.

Changing the BLF Group Name

Select the BLF group whose name will be changed from the list box of the <BLF> window.

Right-click and select the [Rename] menu. Otherwise, press the selected group by using the

mouse to change the name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Enter the name to be changed once input is active. The name of the default group marked as

‘*’ cannot be changed.

Refreshing the BLF Group

Right-click on the list box of the <BLF> window and select [Refresh] to change the list of the

BLF group to the recent data.

Selecting the Refresh Menu

Select a BLF group from the <BLF> window and [Refresh] to import and

NOTE

display the list of the devices included in the selected group. To import the

group data newly, select the blank from the group list of the <BLF> window

and [Refresh].

Adding the Existing Device to the BLF Group

The method of adding the devices included in the existing BLF group such as ‘*Total Station’ to

another BLF group is described below:

Select a device to be added while pressing [Ctrl] in the BLF group. The user can select a

device list only from the list view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Drag and drop the selected device on a new BLF group (Group 3) by using the mouse. The

selected device will be added to the group.

Device Management

Adding a Device

Right-click on the BLF group and click [New Device] to add a system device to the BLF group.

Select a device to be added from [Number] in the window below and fill out [Name] and [Note].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Click [OK] to add the newly created device to the BLF group.

Adding a Speed Dial Number

Right-click on the BLF group and select [New Speed Dial] to add a number including a

C.O.line connection number (e.g. mobile phone, external phone) to a speed dial number.

Enter a speed dial number to be added in [Number] in the window below and fill out [Name]

and [Note] : If the user wants to dial an external phone number, enter the C.O.line connection

number first (e.g. 9).

Click [OK] to add the newly created device to the BLF group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Modifying the Device

Select and right-click the BLF device to be modified. Then, select [Edit Lamp].

Modify [Name] and [Note] in the window below and click [OK].

Deleting the Device

Select and right-click the BLF device to be deleted. Then, select [Delete Lamp].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Once the window that prompts the user to delete the device appears, click [Yes] to delete the

selected device.

Device View Type

The device view types in the BLF area include Card View, List View, and Number View.

Right-click on the BLF area and select the desired view type from [View] to select a device

view type.

Sorting out Devices

The BLF devices are sorted in the sequence of number or name. Right-click on the BLF area

and select the desired sorting method (number or name) from the [Arrange Lamps By] menu

to change the device sorting method.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Refreshing the Device

Right-click on the BLF area and select [Refresh] to change the status of the BLF device to new

data.

Selecting the Refresh Menu

Select a BLF device from the <BLF> window and [Refresh] to import and

NOTE

display the status of the selected device. Select [Refresh] without selecting a

device to import and display the status of all the devices included in the

current group.

Adjusting Device Size

The user can adjust the size of the BLF device in [Card View]. When putting the mouse cursor

to the corner of the first device as shown below, the arrow that allows the user to adjust device

size appears.

Drag the arrow to change the device to the desired size. Then, drop the mouse.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Applying Device Size

The changed device size is applied to other BLF groups the same.

NOTE

Calling Functions

Dialing

Select and right-click a device to dial and select or double-click [Dial].

Pickup

Select and right-click a BLF device that is being connected and can be picked up and click or

double-click [Pick Up].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Transfer/Complete Transfer

Select and right-click a BLF device and click or double-click Transfer/Complete Transfer during

being connected.

Setting/Releasing Do Not Disturb (DND)

Select and right-click a station device the user wants to set or release DND and click [DND].

Setting Call Forwarding Unconditional

Enter the called number by using the keyboard to set call forwarding unconditional.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Right-click on the station device for call forwarding unconditional and select [All Call Forward].

Releasing Call Forwarding Unconditional

Select and right-click on the station device where call forwarding unconditional has been set

and select [All Call Forward].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Icons for Status Display

Device status is displayed at the left of the BLF device numbers.

Icon

Description

Blank

Idle Status

Busy

Out of Service

In conference

Off-Hook or Ringback

Disconnected

Do Not Disturb

On hold

Station lock

A phone is ringing

Shows that all forwarding has been set

Outgoing speed dial number created from the database

Speed dial number set by the user

Speed dial number set in the operator station and system

Unknown status

Status Bar

When a variety of station functions supported by the iDCS system are set, the station status

such as DND, callback, or messages is displayed in the status bar as shown below:

Status displayed in the status bar is described below:

Status

Description

Shows that a call is being recorded.

REC

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Status

CBK(X)

Description

Number (X) of callback that has been set.

MSG(X)

VM(X)

Number (X) of the messages left in the user’s station.

Number (X) of the voice messages saved in the user’s voice mailbox.

Shows whether the station of the operator is in a DND state or not.

Double-click DND ON to release DND. Double-click DND OFF to set

DND.

DND ON/OFF

Shows whether the OfficeServ Operator is used or not.

When double-clicking AVAIL, UNAVAIL (unavailable) is displayed.

A call connected to the user’s station in an UNAVAIL (unavailable)

status is transferred to the destination number for transfer when busy.

AVAIL/UNAVAIL

Allows the user to select either day or night mode.

When double-clicking CRL (Clear)/RP1~RP6, the window that prompts

the user to select a Ring Plan (RP) is displayed. The OfficeServ

Operator runs depending on selected RPs.

CRL/RP1~RP6

CAP

Shows that the <Caps Lock> key is set.

Shows that the <Num Lock> key is set.

Shows that the <Scroll Lock> key is set.

NUM

SCRL

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

CHAPTER 4. OfficeServ Operator Settings

This chapter describes the procedures for setting various options through the OfficeServ

Operator.

Changing Telephone Line

This section describes the procedures for changing the telephone lines of the OfficeServ

Operator.

Option Settings

This section describes the procedures for setting functions such as General, Key Telephone,

Columns, Display, Toolbar, Station Group, Contact Information, Call Control, Blocked CIDs,

and Urgent/VIP CIDs.

Message Handling

This section describes the procedures for connecting to the OfficeServ Link and for

transmitting messages.

Adding Outgoing Call Information to the BLF Group

This section describes the procedures for adding the outgoing call information saved in the

phonebook to the BLF group.

Changing Telephone Line

Select [Phone Lines] from the [Tools] menu to change the telephone line of the OfficeServ

Operator.

Select an extension to be used by the OfficeServ Operator and click the [OK] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Option Settings

Select [Options] from the [Tools] menu to set various options for using the OfficeServ Operator.

The [Options] window is composed of many tabs as described below:

Tab

Description

General

Sets general option values.

Key Telephone

Columns

Selects the information to be received from the OfficeServ system.

Determines if each list should have columns.

Selects display format.

Display

Toolbar

Selects buttons for controlling calls.

Station Group

Contact Information

Call Control

Blocked CIDs

Urgent/VIP CIDs

Color

Selects a station group to be used for the BLF group.

Selects customer information to be displayed.

Sets options for the call control.

Sets blocked CIDs.

Sets an urgent or VIP CID.

Sets the color for the title bar of the sub-window.

Set a password to prevent common users from changing the option

settings.

Advanced

Function Key

Sets the function keys for call control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

General

This tab enables the user to set general option values of the OfficeServ Operator.

Parameters of the [General] tab are described below:

Parameter

Description

Enter the passcode of the extension phone.(default : 1234)

Extension Passcode

OfficeServ Link IP Addr.

OfficeServ Link Port

Enter the IP address of the OfficeServ Link connected to the

OfficeServ system.

Enter the port number of the OfficeServ Link.(default : 6000)

Enter the number of the station to which incoming calls

connected to the unselected DID number are transferred. If

this value is not entered, the incoming calls above will be

connected to the OfficeServ Operator.

Calls with out of Service

DID Redirect to

Enter the extension number to which incoming calls are

transferred when the OfficeServ Operator is not available. Or,

Double-click AVAIL/UNAVAIL from the status bar to select an

extension number.

On Unavail Redirect to

Enter the extension number to which blocked calls are

transferred.

If ‘Automatic Drop’ is selected, a blocked call is transferred to

the entered extension number and is dropped automatically.

In this case, a virtual port of the system can be conveniently

used.

Blocked Calls Redirect to

Default Page Zone

Enter a value for the default page zone.

If a user makes a page without designating a zone while the

default page zone is not set, the page will be made to Zone 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parameter

Description

EasySet URL

Enter the URL address of the Easyset Server

Recommendations when ‘Automatic Drop’ is selected

If ‘Automatic Drop’ is selected while an extension number is set for

transferring blocked calls, all incoming calls to the extension number will be

dropped and making a call from the extension number will be limited. Thus, it

is recommended that a virtual port be used when ‘Automatic Drop’ is set.

NOTE

Key Telephone

This tab enables the user to select information to be retrieved from the switch whenever the

user starts the OfficeServ Operator.

Parameters of the [Key Telephone] tab are described below:

Parameter

Description

Retrieves information such as DND or Lock set in the station

from the iDCS system.

Station Setup

(DND Do Not Disturb, Forward : Automatic Transfer, Lock :

Station Lock)

DT, DS Buttons on the

Operator Extension

Retrieves information on the DT/DS button set in the

operator’s phone.

DID Groups

CLI Names

Retrieves the DID group information from the iDCS system.

Retrieves the CLI information from the iDCS system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parameter

Description

Retrieves the speed dial information set in the operator’s

phone.

Station Speed Dials

Reflect the configuration

changes of the switch in

real time except DT/DS

buttons and Station

Speed Dials

Sets whether to apply in real time the changes in system

information, such as the DID table, CLIP table or station group

setup.

Number of Set Parameters

Selecting more parameters will extend the initialization time since more

information must be retrieved from the system.

NOTE

Columns

This tab enables the user to select the information to be displayed on the Incoming Calls,

Active Calls, and Held Calls windows.

Parameters of the [Columns] tab are described below:

Category

Parameter

CID

Description

Telephone number and name of the other party

DID number and name

Incoming Calls

Active Calls

Held Calls

DID

Duration

Detail

Time elapsed since the call was displayed on the list

Additional information such as re-termination or transfer

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Category

Parameter

State

Description

Status of the call

Active Calls

Contact Info.

Displays the CID and the number most recently

transferred

Note

Call-related notes entered by the operator

Displays the [Orbit Park] button

Held Calls

Orbit Park

Display

This tab enables the user to select the display format.

Parameters of the [Display] tab are described below:

Category

Parameter

Display

Description

Determines the number of messages to be displayed,

which are received from the OfficeServ Operator or the

OfficeServ Call.

messages

Information

Window

Display help

appropriate for

the situation

Determines whether to display instructions for effectively

using the OfficeServ Operator.

Selects information to be displayed on the DID/Queue

list.

Queue should be selected for using the OfficeServ

Operator as the operator/agent of the call center.

DID

DID, Queue

Card View,

List View

Number Only

Determines the display type for the BLF window.

Busy Lamp

Field

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Category

Parameter

Hide ‘Total

Description

Does not display the ‘Total Station’ group on the <Busy

Lamp Field> window.

Station’ Group

Hide ‘Total

Trunk’ Group

Does not display the ‘Total Trunk’ group on the <Busy

Lamp Field> window.

Toolbar

This submenu enables the user to select the [Call Control] buttons to be used in the

<OfficeServ Operator> main window. Seven call control buttons, ‘Dial’, ‘Answer’, ‘Drop’, ‘Hold’,

‘Retrieve a held call’, ‘Transfer’, and ‘Park’, are initially selected by default.

After selecting target call control buttons, click the [OK] button. Click the [Discard Change]

button to return to the original settings or click the [Restore Initial Setup] button to load the

default values.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Station Group

This tab enables the user to select a station group from the station groups set in the iDCS

system. Then the selected station group will be displayed on the BLF group list of the

OfficeServ Operator.

After selecting a station group to be displayed in the BLF group list, click the [OK] button.

Contact Information

This tab enables the user to set whether to display the CID of an incoming station call,

incoming external line calls, or an outgoing call on the Active Calls window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parameters of the [Contact Information] tab are described below:

Parameter

Description

Internal Inbound

Calls

If an intercom call arrives, the system retrieves the CID data from the

DB.

If an external call arrives, the system retrieves the CID data from the

DB.

External Inbound - Search CLI Table for external calls, if a match has not found in the

Calls

Smart Console phonebook: If the CID is not found on the DB, the

system attempts to retrieve the information from the CLI data of the

iDCS system.

If the call was originated from an operator, the system retrieves the CID

data from the DB.

Outbound Calls

Call Control

This tab is used to determine how the OfficeServ Operator should handle the current call when

a common call or a held call arrives while the user is busy.

Parameters of the [Call Control] tab are described below:

Parameter

Description

Hang up the connected call

Hangs up the current call and answers the new call.

Automatically holds the current call and answers the new

call.

Hold the connected call

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parameter

Description

Do not allow to answer other

calls when a call exists

Any newly incoming calls will be rejected when the user is

busy.

Blocked CIDs

This tab enables the user to block undesired calls. Calls from the phone numbers registered to

the block list are automatically transferred to the station set in the [Blocked Calls Redirect to]

tab of the [General] menu.

Parameters of the [Blocked CIDs] tab are described below:

Parameter

Description

Enter a phone number and click [Add] to register the

number to the block list.

If ‘2*’ is entered, all calls from numbers starting with 2 are

blocked.

Type a CID

If ‘21#’ is entered, all calls from numbers ranging from 210

to 219 are blocked.

The external numbers should be entered in a format as

same as that of the CLIP table.

Displays the registered block list.

Select a phone number from the block list and click

[Delete]. Then, the number will be deleted from the list. Up

to ten phone numbers can be registered to the block list.

Block List

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Urgent/VIP CIDs

This tab enables the user to set an urgent or important call. Since calls from the phone

numbers registered to the Urgent/VIP CIDs list are displayed red on the Incoming Calls

window, the calls can be easily recognized.

Parameters of the [Urgent/VIP CIDs] tab are described below:

Parameter

Description

Enter a phone number and click [Add] to register the number to

the urgent/VIP list.

If ‘2*’ is entered, all numbers starting with 2 are registered to the

urgent/VIP list.

Type a CID

If ‘21#’ is entered, the numbers ranging from 210 to 219 are

registered to the urgent/VIP list.

The external phone number should be entered in a format as

same as that of the CLIP table.

Displays the registered urgent/VIP list.

Select a phone number from the urgent/VIP list and click

[Delete]. Then, the number will be deleted from the list. Up to ten

phone numbers can be registered to the urgent/VIP list.

Urgent/VIP List

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Color

This tab enables the user to change the color of the title bar and the color of trunk calls and

the colors for BLF statuses on the <Incoming Calls> window and, <Active Calls> window and

<Held Calls> window.

Select a basic color or click [Define Custom Colors>>] to select a desired color and click [OK].

Click [>>] on the right side of

each color to change the color

setting.

The options are described below:

Category

Parameter

Description

Background

Background color of the title bar

Text color for the incoming calls, active calls, or held

calls

Choose the title

bar colors

Text

Color of the border that surrounds the title bar when

the user presses the [F2], [F3], or [F4] key

Focused

Background color for external inbound calls

displayed on the <Incoming Calls> window and the

<Held Calls> window

Inbound

Choose trunk call

colors

Background color for outbound calls displayed on

the <Incoming Calls> window and the <Held Calls>

window

Outbound

Choose the BLF

Status colors

Color indicating that BLF station is set to

DND/Locked

Forward All

Ringing

Color indicating that all BLF stations are set to

Locked

Color indicating that the BLF device is set to

‘Ringing’

Color indicating that the BLF device is set to ‘On

Hold’

On Held

Busy

Color indicating that the BLF device is set to ‘Busy’

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Category

Parameter

External

Description

Color indicating that the BLF device is set to

‘External Connected’

Connection

Restore Initial

Color

Sets to default color.

Common

Advanced

This tab enables the user to set a password that inhibits common users from changing the

current options.

Parameters of the [Advanced] tab are described below:

Parameter

Description

If this check box is checked, users must enter a password into a

window that appears by selecting [Options] from the [Tools] menu to

open the <Option Setting> window. The <Option Setting> window

appears only when the password matches the password entered in this

tab.

Limit Option

Setting

Enter the password to be used for opening the <Option Setting>

window. This field is enabled only when the [Limit Option Setting] check

box is selected.

Password

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Function Key

This tab enables the user to set the function keys from [F7] to [F12], which are used for call

control.

Click a function key.

After assigning a function to the selected key, press the selected key to execute the assigned

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Message Handling

This function enables the user to exchange messages with another OfficeServ Operator user

or with other OfficeServ applications, such as the OfficeServ Call, which supports message

functions.

Enable Message

This menu enables the user to login to the OfficeServ Link, which serves as a message server,

and exchange messages. However, messages can be exchanged only while the user is

logged in to the OfficeServ Link. Select [Enable Message] from the [Tools] menu.

If the user selects this menu when the menu is not checked, a login message is sent to the

OfficeServ Link. This menu will be checked if the login is successful.

If the user selects this menu when the menu is checked, a logout message is sent to the

OfficeServ Link. This menu will be unchecked if the logout is successful.

Send Message

This menu enables the user to send messages to another logged user.

Select [Send Message] from the [Tools] menu to send messages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

If the user is logged in to the OfficeServ Link, the <Send Message> window will be displayed

as shown below: If the user is not logged in to the OfficeServ Link, the user can automatically

Enter the extension number of the recipient in the [To] text box at the upper section of the

window. Separate numbers with semi-colons (;) when entering multiple numbers (e.g.

202;203;204). Clicking the [Send] button without specifying a destination in the [To] text box

will send the message to all logged-in stations.

My messages and messages received from the other stations while this window is open are

displayed in the text box on the center of the window. Messages that arrive while the message

window is closed are displayed on the <Information> window.

Enter the message to be sent in the text box at the bottom section of the <Send Message>

window. Then, click the [Send] button or press the [Enter] key to send the message.

Add Outgoing BLF Group

Select [Add Outgoing BLF Group] from the [Tools] menu to retrieve the outgoing call

information from the phonebook and to add the information to the BLF group.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Select the table to be added, and click the [Run] button.

If a valid external outbound call information exists in the selected table, the <Outgoing BLF>

window is displayed as shown below:

Click the [OK] button to register the outgoing BLF group with the ‘^Business’ name to the BLF

group window. The outgoing group is automatically displayed with the ‘^’prefixed to the group

name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

CHAPTER 5. Call Control

This chapter describes the procedures for using the general functions and additional functions

of the system through the call control buttons, mouse, keyboard, and popup menu.

The progress of a call is displayed accordingly on the <Incoming Calls> window, <Active

Calls> window, or <Held Calls> window. OfficeServ Operator users can control calls by using

call control buttons or the [Call] menu.

General Functions

This section describes the procedures for executing general functions such as <Dial>,

<Answer>, <Drop>, <Hold>, <Transfer>, <Park>, and <Conference Call> from the <Incoming

Calls> window, <Active Calls> window, or <Held Calls> window.

Additional Functions

This section describes the procedures for executing additional functions such as <Hold with a

Note>, <Target Hold>, <Orbit Park>, <Leave Message>, <Camp On>, and <OHVA>.

The call control buttons and [Call] menu are described below:

Button

Call Menu

Description

Dial

Makes a call

Answer

Drop

Answers an incoming call

Disconnects the current call

Holds a call

Hold

Unhold

Answers a held call

Transfer, Toggle

Station Park

Transfers a call, call alternation

Parks a call in a station

Parks a call by using number keys ranging

from 0 to 9 or reanswers the held call

Orbit Park

Conference

Makes a conference call

Broadcasting

Page

Camp On

Call waiting

Transfer to Voice Mail

Call Recording to Voice Mail

Transfers a call to a voice mailbox

Starts/stops recording a call

Reserves a call connected to a busy

/unanswered station

Callback

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Button

Call Menu

Leave Message

Description

Leaves a message in a busy/unanswered

station

Transfers a call without answering the

incoming call

Redirect

OHVA

Urgent notification

Complete Transfer

Redial

Complete Transfer

Redial

Reestablish

General Functions

Dial

Dialing methods provided by the system are as follows:

Dialing a Call by using the Call Control Button

Enter a phone number, and click the [Dial] button(

call will be displayed as ‘Ringback’ as shown below:

). Then, the status of the corresponding

Dialing a Call by using the [Enter] Key

Enter a phone number. And then press the [Enter] key.

Dialing a Call by Double-Clicking

Select and double-click a device from the <BLF> window to make a call to the selected device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Dialing a Call by using the Popup Menu

Select and right-click a device from the <BLF> window. And then select the [Dial] menu.

Entering Numbers and Special Characters from a Keyboard

The OfficeServ Operator enables the user to conveniently enter the numbers

from 0 to 9 and special characters such as # and * using the keyboard

without putting the cursor on the text box. However, other special characters

cannot be entered.

NOTE

Answer

Once a call is connected to the operator’s station, the connected call is displayed on the

<Incoming Calls> window. If more than two incoming calls are connected, the user can select

a call to answer. The first connected call is displayed on the top of the list.

The [F2] key is used for selecting the first call listed on the <Incoming Calls> window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Answering a Call by using the Call Control Button

Select a call to answer, and click the [Answer] button (

Answering a Call by using the [Enter] Key

Select a call and press the [Enter] key to answer the call.

Answering a Call by Double-clicking

Double click an incoming call from the <Incoming Calls> window to answer the call.

Answering a Call by Drag and Drop

Drag an incoming call from the <Incoming Calls> window and drop the call on the <Active

Calls> window to answer the call.

Answering a Call by using the [+] Key

Press the [Insert] key to answer the first call listed on the incoming call list.

Drop

The [F3] key is used for selecting the first call on list of the <Active Calls> window.

Disconnecting a Call by using the Call Control Button

Select a call and click the [Drop] button (

) to disconnect the call.

Disconnecting a Call by using the [-] Key

Select a call and press the [-] key to disconnect the call.

Disconnecting a Call by using the Popup Menu

Right-click a device from the <Active> window. And then select the [Drop] menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Selecting the Call on the Top of the <Active Calls> Window

Press the [F3] key to select the first call on the list of the <Active Calls>

window. Press the [F4] key to select the first call on the list of the <Held

Calls> window.

NOTE

Hold

The [F3] key is used for selecting the first call on list of the <Active Calls> window.

Holding a call by using the Call Control Button

Select a call from the <Active Calls> window, and click the [Hold] button (

Then the <Held Calls> window will be displayed as shown below:

) to hold the call.

Holding a Call by using the [/] Key

Select a call from the <Active Calls> window and press the [/] key to hold the call.

Holding a Call by Drag and Drop

Drag a call from the <Active Calls> window and drop the call on the <Held Calls> window to

hold the call.

Unhold

The [F4] key is used for selecting the first call on list of the <Held Calls> window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Answering a Held Call by using the Call Control Button

Select a held call and click the [Unhold] button (

) to answer the held call.

Answering a Held Call by using the [Enter] Key

Select a held call and press the [Enter] key to answer the held call.

Answering a Held Call by Double-clicking

Double-click a held call to answer the held call.

Answering a Held Call by Drag and Drop

Drag a held call from the <Held Calls> window and drop the call on the <Active Calls> window

to answer the held call.

Transfer

The OfficeServ Operator provides two types of call transfer, the Blind Transfer and

Consultation Transfer. The OfficeServ Operator uses Consultation Transfer by default. Blind

Transfer is applied when a call is transferred by dragging and dropping the call to the BLF.

Blind Transfer: Transfers a call regardless of the recipient’s will.

Consultation Transfer: Transfers a call under the agreement of the recipient

Transferring a Call by using the Call Control Button

Enter an extension number, and click the [Transfer] button (

Transferring a Call by using the [Enter] Key

Enter an extension number, and press the [Enter] key.

Transferring a Call by Dragging and Dropping

Press the [Ctrl] key and drag-and-drop a call from the <Active Calls> window to the target

device on the BLF window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Canceling Call Transfer by using the [-] Key

The extension number of the caller and the extension number of the final recipient are

displayed in <Active Calls> window when the call transfer is attempted. Press the [-] key to

cancel the call transfer.

Canceling Call Transfer by using the Popup Menu

The extension number of the caller and the extension number of the final recipient are

displayed in <Active Calls> window when the call transfer is attempted. Right-click a device

and then select the [Drop] menu to cancel the call transfer.

Blind Transfer by using the [Enter] Key

The extension number of the caller and the extension number of the final recipient are

displayed in <Active Calls> window when the call transfer is attempted. Press the [Enter] key

to complete the call transfer.

Blind Transfer by using the Popup Menu

The extension number of the caller and the extension number of the final recipient are

displayed in <Active Calls> window when the call transfer is attempted. Right-click a device

and then select the [Complete Transfer] menu to complete the call transfer.

Blind Transfer by Drag and Drop

Drag a call from the <Active Calls> window and drop the call on the target device displayed on

the <BLF> window.

Troubleshooting when call transfer fails

If the recipient is absent or does not answer the transferred call, the call will

NOTE

be returned to the operator. In such cases, a ‘Reconnected’ message is

displayed as detail information.

Consultation Transfer

This menu is used to transfer calls under the consent of the recipient. When the recipient

answers the call, the call state will be displayed as below.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

The operator can toggle a call between a ‘Connected’ station and a station ‘On Transfer ’, or

complete the call transfer.

Toggling a Call by using the Call Control Button

Once the [Transfer] button changes to the [Toggle] button, press the [Toggle] button (

Completing Consultation Transfer by using the [Enter] Key

Press the [Enter] key to complete the consultation transfer. When the consultation transfer is

completed, the call is deleted from the <Active Calls> window.

Canceling Consultation Transfer by using the [-] Key

Press the [-] key to cancel the consultation transfer and to connect the call to the original

recipient.

Station Park

The operator can park a call on a station connected to an external call. In such cases, the

external (C.O. line) call becomes a held call. However, if the station is idle, a blind transfer is

performed for the call.

Parking a Call by using the Call Control Button

Enter the target extension number, and click the [Station Park] button (

park is completed, the call is deleted from the <Active Calls> window.

). When the station

Parking a Call through Drag-and-Drop

Drag a call from the <Active Calls> window and drop the call on a busy station in the <BLF>

window to park the call on the busy station.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Parking a Call on an Available Station through Drag-and-Drop

Press the [Alt] key and drag a call from the <Active Calls> window, and drop the call on an

available station in the <BLF> window.

Attempt/Cancel a Conference

This menu enables multiple users to join a conference call.

Attempting a Conference Call by using the Call Control Button

Enter a number to add to the conference call and press the [Conference button] (

The window below shows that a conference call is being attempted to Station 204 while

making a call to Station 701.

If the recipient answers the conference call, the <Active Calls> window will be displayed as

shown below:

Canceling a Conference Call through the Call Control Button

Click the [Drop] button (

) before the recipient answers the call.

Canceling a Conference Call through the [-] Key before

Press the [-] key before the recipient answers the call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Attempting a Conference Call using the Call Control Button

Press the [Conference] button after the recipient answers the call to start a conference call.

Once the conference call is connected, the <Active Calls> window is displayed as shown

below:

Add/Remove Participants or Leave a Conference Call

This section describes the procedures for adding and removing participants of a conference

call, and leaving the conference call. The OfficeServ system supports up to five participants for

a conference.

Adding Participants

Participants can be added during a conference call as described in the ‘Attempt/Cancel a

Conference Call’ section.

Removing Participants by Using the Call Control Button

Select a participant and click the [Drop] button (

conference call.

) to remove the participant from the

Removing Participants by Using the [-] Key

Select a participant and press the [-] key to remove the participant from the conference call.

Leaving a Conference Call by Using the Call Control Button

Click the [Drop] button (

) to leave the conference call.

Leaving a Conference Call by Using the [-] Key

Press the [-] button to leave the conference call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Page

Paging within the Default Page Zone

Click the [Page] button ( ) in order to page the default page zone set by [Option].

Paging in a Zone other than the Default Page Zone

Enter a target zone and click the [Page] button (

When not using a headset

A user who does not use a headset must lift the handset before paging.

NOTE

Additional Functions

Hold with Note

If a user holds a call after leaving a note in the [Note] column of the <Active Calls> window, the

note is displayed on the memo column of the <Held Calls> window. This note is also saved in

the Call Log database after the call is completed and can be verified through the ‘Log Viewer’.

‘Hold with Note’ function of the OfficeServ Operator

This is one of the main functions of the OfficeServ Operator. This function

NOTE

allows users to check the reason why a call was held when the user answers

and handles the held calls.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Holding a Call with a Note by Using the Call Control Button

Enter a note in the [Note] column of the <Active Calls> window, and click [Hold] button (

display the content of the note in the <Held Calls> window as shown below:

) to

Holding a Call with a Note by Using the [/] Key

Enter a note in [Note] of the <Active Calls> window, and press [F3] and [/]. The call will be held

with the note.

Holding a Call with a Note by Drag and Drop

Enter a note in [Note] of the <Active Calls> window. Drag the call from the <Active Calls>

window and drop the call on the <Held Calls> window to hold the call with the note.

Target Hold (Transfer Reservation)

If the user wishes to transfer a call to a busy station, the user can reserve the transfer by

setting the other station as the target. When the target station turns idle, the held call is

automatically transferred to the target station.

‘Target Hold’ function of the OfficeServ Operator

This is one of the main functions of the OfficeServ Operator. This function

NOTE

enables the user to hold a call, monitor the state of the target station, answer

the held call, and transfer the call at the same time.

Executing the ‘Target Hold’ Function by using the Call Control Button.

Enter the target extension number and click the [Hold] button (

be displayed in [Note] of the <Held Calls> window.

). The extension number will

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Executing the ‘Target Hold’ Function by using the [/] key.

Enter the target extension number and press the [/] key to execute the ‘Target Hold’ function.

Executing the ‘Target Hold’ Function by Drag and Drop

Enter the target extension number and drag the call from the <Active Calls> window and drop

the call on the <Held Calls> window to execute the ‘Target Hold’ function.

Executing the ‘Target Hold’ function with a Note

If the ‘Target Hold’ function is executed while a note is saved in [Note] of the <Active Calls>

window, the target extension number and contents of the note will be displayed in [Note] of the

<Held Calls> window. The note will also be saved in the call log database and can be verified

through the ‘Log Viewer’.

When a recall time is set

If the call connected to the target station is not disconnected until the held

NOTE

call recall time set in the system elapses, the held call will be automatically

recalled to the OfficeServ Operator. It is recommended that the held recall

time of the system be lengthened to efficiently use the ‘Target Hold’ function.

Orbit Park

If a station is connected to an external call, the call can be saved in one of the keys from 0 to 9

and can reconnected later.

Holding Calls

Saving a Call by using the Call Control Button.

Select one of the number keys from 0 to 9 and click the [Orbit Park] button (

Saving a Call by using the Number Button

Click one of the number buttons from 0 to 9 to save a call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Saving a Call by using the [Tab] Key

Press [F4] to open the <Held Calls> window, and press the [Tab] key to select number 0. Then,

the number 0 button will be displayed blue.

Press the [Enter] key to save the call in number 0. After the call is saved, ‘P:0’ is displayed in

the [Note] column and the number 0 button is displayed in yellow as shown below. The user

can toggle between numbers to select a saved call by pressing the [Tab] key.

Reanswering Calls

Reanswering a Call by using the Call Control Button

Enter a target number where and click the [Orbit Park] button

saved in the corresponding number.

(

) to reanswer the call

Or, press [F4] to open the <Held Calls> window and select a target held call displayed as ‘P:#’,

and click the [Answer] button ( ) to reanswer the call.

Reanswering a Call by using the Number Button

Click the number where the call is saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Reanswering a Call by using the [Tab] Key

Press [F4] to open the <Held Calls> window, press the [Tab] key to select the target number

displayed in yellow, and press the [Enter] key to reanswer the call saved in the selected

number.

Reanswering a Call by using the [Enter] Key

Press [F4] to open the <Held Calls> window. Select a target held call displayed as ‘P:#’ in

[Note], and press the [Enter] key to reanswer the target held call.

Reanswering a Call by Double-clicking

Double click a target held call displayed as ‘P:#’ in [Note] of the <Held Calls> window to

reanswer the target held call.

Reanswering a Call by Drag and Drop

Drag a target held call displayed as ‘P:#’ in [Note] of the <Held Calls> window, and drop the

call on the <Active Calls> window to reanswer the target held call.

Executing the <Orbit Park> function

Select [Columns] from [Options], and select ‘Orbit Park’ from [Held Call].

NOTE

Call Back

If a call is connected to a busy or unanswered station, the caller can use the ‘Call Back’

function, which connects the caller to the target station when the line becomes available.

Setting the ‘Call Back’ Function by using the Call Control Button

If the target station is busy or does not answer, click the [Call Back] button (

‘Call Back’ function.

) to set the

Setting the ‘Call Back’ Function by using the Popup Menu

If the target station is busy or does not answer, right-click a device from the <Active> window

and then select the [Callback] menu to set the ‘Call Back’ function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Leave Message

If the target station is busy or does not answer, the caller can leave a message.

Leaving a Message by using the Call Control Button

After dialing the station, click the [Message] button (

) to leave a message.

Leaving a Message by using the Popup Menu

After dialing the station, right-click a device from the <Active> window and then select the

[Leave Message] menu.

Camp On

When the user transfers a call to a busy station, the user can set the ‘Camp On’ function.

Setting the ‘Camp On’ Function by using the Call Control Button

When transferring a call to a busy station, click the [Camp On] button (

On’ function.

) to set the ‘Camp

Setting the ‘Camp On’ Function by using the Popup Menu

When transferring a call to a busy station, right-click a device from the <Active> window and

then select the [Camp On] menu to set the ‘Camp On’ function.

Setting the ‘Camp On’ & ‘Drop’ Functions by using the [Enter] Key

When transferring a call to a busy station, press the [Enter] key to set the ‘Camp On’ and

‘Drop’ functions.

Setting the ‘Camp On’ & ‘Drop’ Function by using the Popup Menu

When transferring a call to a busy station, right-click a device from the <Active> window and

then select the [Complete Transfer] menu to set the ‘Camp On’ and ‘Drop’ functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

OHVA

When the user makes or transfers a call to a busy station, the user can set the ‘OHVA’ function.

Setting the ‘OHVA’ Function by using the Call Control Button

When making or transferring a call to a busy station, click the [OHVA] button (

‘OHVA’ function.

) to set the

Setting the ‘OHVA’ Function by using the Popup Menu

When making or transferring a call to a busy station, right-click a device from the <Active>

window and then select the [OHVA] menu to set the ‘OHVA’ function.

When DND is set to the station

If DND is set on the target station, the ‘OHVA’ function cannot be set.

NOTE

Connect to Voice Mailbox

The user can check messages saved in the voice mailbox by selecting [My Voice Mail] from

the [Call] menu.

This menu enables digital/IP phone users to automatically make a call through a speaker. For

regular phones, lift the handset first before attempting the connection to the voice mailbox.

Checkpoint

The SVM card should be mounted on the system and operated properly to

NOTE

use My Voice Mail.

Leave Voice Message

The user can leave a message to another subscriber’s voice mailbox by selecting [Leave

Voice Message] from the [Call] menu.

After entering the extension number in [Destination] of the <OfficeServ Operator> Call Button

Window, select [Leave Voice Message] from the [Call] menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Transfer to a Voice Mailbox

If a call is connected or transferred to a busy or unanswered station, the user can transfer the

call to the voice mailbox of the recipient.

Enter the extension number of the recipient, and click the [Transfer to a Voice Mailbox] button

(

Record Voice Messages

Click the [Record] button (

) to record messages in the voice mailbox.

The recorded messages are automatically saved in the voice mailbox of the OfficeServ

Operator user. While recording messages, ‘REC’ is displayed on the status bar.

Redirect

This function allows the user to transfer incoming calls to another station.

Incoming Call Transfer by Pressing the Call Control Buttons

Press the [F2] key to highlight the call at the top of the list of incoming calls.

Select an incoming call to transfer from the <Incoming Calls> window, and enter the extension

number to which the incoming call will be transferred. Click the <Redirect> button (

Incoming Call Transfer by Drag and Drop

Select an incoming call to transfer, and drag and drop the call to the targeted station of the

<BLF> window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Pickup

If the connected station does not answer the call, another OfficeServ Operator user can pick up

the call.

Call Pickup by Double Clicking

Double-click the station that will pick up a call from the <BLF> window. The icon below is

displayed when a call is connected to a station of the <BLF> window:

Call Pickup by Using the Popup Menus

Select a station that will pick up a call from the <BLF> window. Right-click and select the <Pick

Up> menu.

Repeating the Last Action Once a Call is Reconnected

When a call is reconnected after holding, target holding, orbit parking or transfering, the user

can repeat the last action.

Pressing the [Insert] Key to Hold a Reconnected Call on Hold Again

When a call on hold is reconnected and ‘Hold Recall’ is displayed at the [Details] field of the

<Active Calls> window, Press the [Insert] key to hold the reconnected call. If a call on hold is

reconnected, the <Active Calls> window will be displayed as shown below:

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Pressing the [Insert] Key to Hold the Targeted Reconnected Call on Hold Again

When a targeted call on hold is reconnected and ‘Hold Recall: extension number’ is displayed

at the [Details] field of the <Active Calls> window, Press the [Insert] key to do a target hold.

Pressing the [Insert] Key to do an Orbit Park the Reconnected Call on Orbit Park Again

When a call on orbit park is reconnected and ‘Park Recall: Zone number’ is displayed at the

[Details] field of the <Active Calls> window, Press the [Insert] key to do an orbit park.

Pressing the [Insert] Key to Transfer a Transferred Reconnected Call Again

When a transferred call is reconnected and ‘Xfer Recall: extension number’ is displayed at the

[Details] field of the <Active Calls> window, Press the [Insert] key to transfer the reconnected

call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

ANNEX A. Retrieving the Call Log

This chapter describes the procedures for retrieving the call log in the OfficeServ Operator.

Log Viewer Start

Select the [Log Viewer] menu from the [Tools] menu of the OfficeServ Operator, and execute

the Log Viewer to retrieve the call log.

Log Viewer Menus

Examples of the logs that can be retrieved in the Log Viewer include statistical data, all calls,

inbound/outbound calls, station/trunk calls, and call logs based on DID numbers/names/called

parties/the numbers to which the calls are transferred.

Log Viewer Start

Select the [View Logs] from the [Tools] of the OfficeServ Operator, or select

[Start]Æ[Programs]Æ[OfficeServ Operator]Æ[Log Viewer] from the Windows desktop to view

the call log.

Once the Log Viewer is executed, the window below is displayed:

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Log Viewer Menus

The OfficeServ Operator allows the user to store the logs of both incoming and outgoing calls

in the database. The <Run> menu consists of submenus as shown below:

Category

Statistics

Description

Displays simple statistical data.

Total Log

Displays detailed information on all calls.

Inbound Calls Log

Outbound Calls Log

Trunk Calls Log

Station Calls Log

Displays detailed information on incoming calls.

Displays detailed information on outgoing calls.

Displays detailed information on trunk calls.

Displays detailed information on station calls.

Displays detailed information on calls retrieved based on DID

number/name.

DID Log

CID Log

Displays detailed information on calls with specific called parties.

Transferred

Displays detailed information on calls transferred to specific

numbers.

Destination Log

Columns of each log window are described as follows:

Column

Description

Incoming calls are displayed as Å.

Incoming/Outgoing

Outgoing calls are displayed as Æ.

Name

Tel

Displays the names of the called parties.

Displays phone numbers.

Date

Displays call dates.

Duration

Displays call duration on a second basis.

Calling status is as follows:

- Ringback : When making a call to a station, the called party

does not answer the call.

State

- Ringing : When a call is connected to a station, the called party

does not answer the call.

- Connected : A call is connected.

- Busy : The called station is busy.

DID Tel

DID Name

Note

Displays DID numbers.

Displays DID names.

Displays notes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Typically, all logs are displayed in a descending order. When clicking a column header in a

specific row of each log screen, the logs are sorted in an ascending or descending order.

Retrieving Logs

Retrieving Statistical Logs

Follow the steps below to retrieve statistical logs.

Select the [Statistics] menu from the [Run] to see the <Statistics> window.

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Retrieving All Logs

Follows the steps below to retrieve all logs.

Select the [Total Log] menu from the [Run] to see the <Total Log> window.

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Click the scroll button to see a specific calling list. Also, the user may view the list by

maximizing the window. The window below shows the maximized <Total Log Viewer>

window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Sort out the calling list by column by clicking the headers of the list to retrieve the call log.

The window below shows the example of sorting out the list by the phone number column.

Retrieving Inbound Calls Logs

Follow the steps below to retrieve inbound calls logs.

Select the [Inbound Calls Log] menu from the [Run] to see the <Inbound Calls Log>

window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Retrieving Outbound Calls Logs

Follow the steps below to retrieve outbound calls logs.

Select the [Outbound Calls Log] menu from the [Run] to see the <Outbound Calls Log>

window.

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Retrieving Trunk Calls Logs

Follow the steps below to retrieve trunk calls logs:

Select the [Trunk Calls Log] menu from the [Run] to see the <Trunk Calls Log> window.

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Retrieving Station Calls Logs

Follow the steps below to retrieve station calls logs.

Select the [Station Calls Log] menu from the [Run] to see the <Station Calls Log> window.

Enter the start time and end time for retrieving logs. Click [Run] to see the search results

within the time period.

Retrieving DID Logs

Follow the steps to retrieve DID logs.

Select the [DID Log] menu from the [Run] to see the <DID Log> window.

Enter the start time and end time for retrieving logs and DID No./Name.

Click [Run] to see the log retrieval results for the DID No. or DID name within the time

period.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Retrieving CID Logs

Follow the steps below to retrieve CID logs.

Select the [CID Log] menu from the [Run] to see the <CID Log> window.

Enter the start time and end time for retrieving logs and DID No./Name.

Click [Run] to see the log retrieval results for the DID No. or DID name within the time

period.

Retrieving Logs for Each Transfer Destination

Follow the steps below to retrieve logs for each transfer destination.

Select the <Transferred Destination Log> menu from the [Run] to see the <Transferred

Destination Log> window.

Enter the start time and end time for retrieving logs and the transfer destination number

to be retrieved.

Click [Run] to see the log retrieval results for the transfer destination number within the

time period.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

ANNEX B. Importing/Exporting Excel Files

This Annex describes the procedures for importing phone number data in an Excel file into the

OfficeServ Operator phone book, or for exporting the phone book to an Excel file.

Importing Excel Files

The OfficeServ Operator allows the user to import the phone number data in an Excel file

format into OfficeServ Operator.

Exporting Excel Files

The OfficeServ Operator allows the user to export the phone book data to an Excel file.

Importing Data in an Excel File Format Into

a Phone Book

Follow the steps below to import data in an Excel file format into a phone book.

Select the [Import/Export Excel Files] from the [Tools] in the main window of the

OfficeServ Operator to see the <Excel Import/Export Wizard> window.

Select the Pbook.mdb file from phonebook files, and click the [Import] button. If the

window below is displayed, click the [No] button if the imported telephone numbers do

not follow the format below to correct the Excel file: If the imported telephone numbers

follow the format, click [Yes].

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

In the window below, click the [Index] button to select the Excel file to import. Click the

[Next>] button.

Select the worksheet to import from the window below, and click the [Next>] button. When

selecting a worksheet, some data of the worksheet are displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Select the range of the Excel Sheet to import, and click the [Next>] button. If the whole

worksheet is required to import, select [Whole]. If the partial worksheet is required to

import, select [Partial]. Then, set the range. The window below shows the range of a

selected worksheet ranging from the 1st line of the A column to the 10^thline of the K

column.

In the window below, select a column of the phone book to import. Select an item in the

Phonebook Field and in the Excel Column, and click the [↔] button. Check the selected

items in the list at the center of the dialog box. Either [Name] or [Company] must be

selected. After selecting items to import, click the [Next>] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

In the window below, select the phone book table where the imported data will be stored,

and click the [Next>] button. When the user wants to store the data in a new table, check

the New Table, and enter the name of the new table. When the user wants to store the

data in the existing table, check the Existing Table, and select one from the list.

8 When the dialog box below prompts the user to confirm the selection, click the [Finish]

button.

Once the import of the Excel data is successfully completed, the message below is

displayed:

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Exporting Phone Book Data to an Excel File

Follow the steps below to export phone book data to an Excel file.

Select the [Import/Export Excel Files] from the [Tools] in the main window of the

OfficeServ Operator to see the [Excel Import/Export Wizard] window.

Select the PBook.mdb from the phone book files, and click the [Import] button.

Select the table name to export, and click the [Next>] button. If the user wants to export

all the tables, select all tables.

Select an Excel file where the selected phone book will be stored. When the user wants

to create an Excel file, click the [New] button. When the user wants to store the phone

book into the existing Excel file, click the [Browse] button. Select the selected phonebook

table, and click the [Next>] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

When the dialog box below prompts the user to confirm the selection, click the [Finish]

button.

Once the import of the Excel data is successfully completed, the message below is

displayed:

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

ABBREVIATION

BLF

Busy Lamp Field

CBK

Call Back

Compact Disk

CID

CLIP

CPU

CRL

CTI

Caller Identification

Calling Line Identification Presentation

Central Processor Unit

Clear (Ring Plan)

Computer Telephony Interface

Database

DID

DND

Direct Inward Dialing

Do Not Disturb

Direct Station

Direct Trunk

MMC

MSG

Man Machine Command

Message

ODBC Open Database Connectivity

REC

Record

Ring Plan

Voice Mail

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

Software License Agreement & Limited Warranty

For OfficeServ CTI Applications for

iDCS Keyphone Series

IMPORTANT, READ CAREFULLY

This Samsung End-User License Agreement (EULA) is a legal binding agreement between you (either an

individual or an entity) and Samsung for Samsung software product identified above, which includes computer

software and may include printed material, and "online" or electronic documentation ("SOFTWARE"). By

installing, using the SOFTWARE, you indicate your acceptance of this Samsung License Agreement. If you do

not agree to the terms of this License Agreement, please do not install or use the enclosed SOFTWARE.

SOFTWARE LICENSE

The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual

property laws and treaties.

1. GRANT OF LICENSE. This License Agreement grants you following rights:

a. SOFTWARE: Samsung grants to you a personal, non-exclusive license to make and use one (1) copy of

the SOFTWARE accompanying this Agreement on any single computer, provided the SOFTWARE is in

use on only one computer at any time. If you have multiple Licenses for the SOFTWARE, then at any

time you may have as many copies of the SOFTWARE in use as you have Licenses.

b. Electronic Documents: Solely with respect to electronic documents included with the SOFTWARE, you

may make an unlimited number of the copies, provided that such copies shall be used only for internal

purpose and you shall not publish or distribute such to any third party, without Samsung Electronics

Co., LTD. written and expressed consent.

c. Limitation on Reverse Engineering, Decompilation, Disassembly: You shall not reverse engineer,

decompile or disassemble the SOFTWARE, except to the extent that this restriction is expressly

prohibited applicable law.

d. Separation of Components: The SOFTWARE is licensed as a single product. Its component parts may

not be separated for use on more than one computer.

e. Rental: You may not rent, lease and/or lend the licensed SOFTWARE.

f. Support Services: Samsung may provide you with support services related to the SOFTWARE,

according to Samsung policies and programs and in for the country in which the SOFTWARE was

purchased. With respect to technical information you provide to Samsung as part of the support

services, Samsung may use such information for its business purpose, including for product support

and development. Samsung will not utilize such technical information in a form that personally

identifies you.

g. SOFTWARE Transfer: You may permanently transfer all of your rights according to this agreement,

provided you retain no copies, you transfer all of the SOFTWARE, and the recipient agrees to the

terms of this agreement by notifying in writing to authorized Samsung VAR, outfit and/or dealer in

which the SOFTWARE was purchased. And including all prior versions of SOFTWARE, if the SOFTWARE

is an upgrade.

Download from Www.Somanuals.com. All Manuals Search And Download.

Home Page

Table of Contents

h. Termination: Without prejudice to any other rights, Samsung may terminate this agreement if you fail

to comply with the terms and condition of this agreement. In such event, you must destroy all copies

of the SOFTWARE and all of its component parts.

2. SOFTWARE ACTIVATION

Software Activation; Samsung will provide a software activation code that will allow use of the purchased

OfficeServ CTI products. The activation code will be associated with the MAC address of the LAN interface

of the Samsung telephone system. In the event of hardware failure associated with the LAN interface

Samsung will issue a replacement software activation code when requested by a Samsung authorized

dealer. In the event that a replacement software activation code is issued the defective hardware

associated with the original software activation code must be returned to Samsung. If the hardware

associated to the software activation code is not returned to Samsung by the dealer the dealer will be

billed for the original purchase price of the OfficeServ CTI application.

3. UPGRADES & COPYRIGHT

a. Upgrade: If the SOFTWARE is an upgrade of a component of a package of software programs that

you licensed as a single product, the SOFTWARE may be used and transferred only as an part of that

single product package and may not be separated for use on more than one computer.

b. Copyright: The SOFTWARE is owned by Samsung or its suppliers and protected by copyright laws and

international treaty provisions. Therefore, you must treat the SOFWARE like any other copyrighted

material except that you may install the SOFTWARE on a single computer provided you keep the

original solely for backup or archival purpose. You may not copy the printed materials accompanying

the SOFTWARE.

LIMITED WARRANTY

Samsung warrants that (a) the SOFTWARE will perform substantially in accordance with the accompanying

written materials for a period of ninety (90) days from the date of receipt, and (b) any Samsung supplied

hardware accompanying the SOFTWARE will be free from defects in materials and workmanship under normal

use and service for a period of one(1) year from the date of receipt. During the warranty periods specified

above, Samsung will replace or repair any software or hardware found to be defective. Warranty claims

should be made through the Samsung dealer from whom the products were purchased, and must be made

within the applicable warranty period.

NO OTHER WARRANTIES

TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE LAW, SAMSUNG DISCLAIMS ALL OTHER

WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE, THE

ACCOMPANYING PRODUCT MANUAL(S) AND WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

NO LIABILITY FOR DAMAGES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL SAMSUNG OR ITS

SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES

FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY

OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE PRODUCT,

EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Samsung Telecommunications America, L.P.

Download from Www.Somanuals.com. All Manuals Search And Download.

Raypak Swimming Pool Heater 185A User Guide
ReliOn Blood Pressure Monitor HEM 780REL User Guide
Rotel Stereo Amplifier RA 913 User Guide
Ryobi Battery Charger P541 User Guide
Samsung Bluetooth Headset AWEP570PBECSTA User Guide
Sanyo Battery Charger HR 4 5AU User Guide
Sanyo Camcorder VPC SH1 User Guide
Seagate Computer Drive ST98823SB User Guide
Sears Blower 257796362 User Guide
Sega Video Games 061213 User Guide