SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
TEL: 1-905-542-3535
SERVICE DIVISION
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
1-800-SAMSUNG (1-800-726-7864)
AH68-01853S
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
No t e t o CATV s ys t e m in s t a lle r :
This rem inder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
VOLUME
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install
your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the
ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other
equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for
continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to
disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused
for a long period of time.
During thunderstorms, disconnect AC main plug from
the wall outlet.
Do not expose the unit to direct sunlight or other heat
sources.
Voltage peaks due to lightning could damage the unit.
This could lead to overheating and malfunction of the
unit.
Protect the player from moisture(i.e. vases) , and excess
heat(e.g.fireplace) or equipment creating strong magnetic or
electric fields (i.e.speakers...). Disconnect the power cable from
the AC supply if the player malfunctions. Your player is not
intended for industrial use.
The battery used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been
stored in cold temperatures.
If transporting the player during the winter, wait approximately
2 hours until the unit has reached room temperature before using.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimize
signal distortion and loss.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal
decoding technology that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS play backs 5.1 channel sound with less compression than Dolby
Digital for richer sound.
SFE(Sound Field Effect) Using 24bit Audio DSP
Provides more realistic surround sound with normal stereo audio sources.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
PREPARATION
Safety Warnings ..............................................................................................................2
Precautions......................................................................................................................3
Features ..........................................................................................................................4
Description ......................................................................................................................6
CONNECTIONS
Connecting the Speakers ................................................................................................10
Connecting External Components ..................................................................................12
Connecting the FM and AM Antennas.............................................................................15
OPERATION
Before Using the AV Receiver.........................................................................................16
Selecting Digital/Analog Input .........................................................................................18
Setting the Speaker Mode...............................................................................................20
Setting the Speaker Listening Distance .........................................................................22
Setting Digital Input .........................................................................................................24
Setting DRC (Dynamic Range Compression) .................................................................25
Test Tone ........................................................................................................................26
Setting Speaker Level .....................................................................................................28
Dolby Pro Logic ll Mode..................................................................................................30
Dolby Pro Logic ll Effect .................................................................................................32
SFE Mode........................................................................................................................34
Stereo Mode....................................................................................................................36
RADIO OPERATION
Listening to Radio ...........................................................................................................38
Presetting Radio Stations ...............................................................................................39
MISCELLANEOUS
Convenient Functions......................................................................................................40
Operating TV with Remote Control..................................................................................42
Operating your VCR (DVD) with Remote Control............................................................44
Before Calling for Service................................................................................................46
Specifications ..................................................................................................................48
WARRANTY ....................................................................................................................49
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
[
]
Front Panel
FUNCTION button
SELECT (
TUNING (
) button
) button
,
,
INPUT MODE button
POWER STANDBY Indicator
HEADPHONE Jack
SURROUND button
POWER button
SETUP button
VOLUME CONTROL
[
]
Display
DTS
INDICATOR
LIVE SURROUND
INDICATOR
DOLBY
INDICATOR
SPEAKER INDICATOR
L.PCM
INDICATOR
DOLBY DIGITAL
INDICATOR
RADIO FREQUENCY
INDICATOR
DIGITAL INDICATOR
DOLBY PRO
LOGIC II
RADIO STEREO INDICATOR
INDICATOR
RADIO BROADCASTING
RECEIVING INDICATOR
FRONT DISPLAY
6
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
Rear Panel
VCR/SAT VIDEO INPUT
JACK
AM ANTENNA
JACK
VCR VIDEO OUTPUT
JACK
FM ANTENNA
JACK
COOLING FAN
DVD VIDEO INPUT
JACK
FRONT SPEAKER
TERMINALS
DVD OPTICAL DIGITAL
AUDIO INPUT JACK
SUBWOOFER SPEAKER TERMINALS
SURROUND SPEAKER TERMINALS
CD COAXIAL DIGITAL
AUDIO INPUT JACK
CENTER SPEAKER TERMINALS
MONITOR VIDEO
OUTPUT JACK
DVD AUDIO INPUT JACKS
VCR/SAT AUDIO INPUT JACKS
CD AUDIO INPUT JACKS
VCR AUDIO OUTPUT JACKS
SUBWOOFER OUTPUT JACKS 1, 2
Accessories
√√
œœ
Remote Control
AM Antenna
FM Antenna
User’s Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
[
]
Remote Control
TV button
DVD button
VCR button
AMP button
DIMMER button
POWER button
TV VIDEO FUNCTION button
,
CD button
VCR/SAT button
DVD button
NUMBER(0~9) buttons
SLEEP button
MO/ST button
DRC button
TUNER button
INPUT MODE DIGITAL button
INPUT MODE ANALOG button
EXTERNAL DEVICE PLAYBACK button
MUTE button
VOLUME CONTROL button
TUNER/CHANNEL button
TUNING MODE button
MENU button
CUSOR/ENTER button
SUBWOOFER button
INFO button
TUNER MEMORY button
MODE button
STEREO button
EFFECT button
SPK DISTANCE button
SPK LEVEL button
TEST TONE button
SPK SELECT button
SFE MODE button
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert Remote Batteries
Remove the battery
cover in the direction
of the arrow.
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
1
2
3
Follow these precautions to avoid leaking or cracking batteries:
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Use the correct type of batteries.Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
•
•
•
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated
at a horizontal angle of up to 30° from the remote control sensor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SL
SR
Position of AV Receiver
Surround Speakers
•
Place AV Receiver on a dedicated stand or rack.
•
•
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they
face each other.
•
Place them about 60 to 90cm (2 to 3feet) above your ear,
facing slightly downward.
Front Speakers
❈ Unlike the front and center speakers, the surround
speakers are used to handle mainly sound effects and
sound will not come from them all the time.
•
•
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Subwoofer
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
Center Speaker
•
It is best to install it at the same height as the front
speakers.
•
You can also install it directly over or under the TV.
•
When you attach the speakers to a wall, make sure to
fasten them tightly so they do not fall off.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVE SUBWOOFER
(not supplied)
FRONT (R)
PS-AF610
FRONT (L)
PS-AF610
SURROUND (R) SURROUND (L)
PS-AR610 PS-AR610
•
If more bass is desired, you can
connect an additional active
subwoofer (not supplied) to the
Subwoofer 1or 2 port. Since the
signal on the Subwoofer 1and 2 ports
is not stereo, you will hear the same
mono bass sound regardless of the
port you connect to.
MAIN UNIT
AV-R610
SYSTEM MODEL NAME : HT-AS610
CENTER
PS-AC610
MAIN UNIT
AV-R610
FRONT SPEAKER
CENTER SPEAKER
SURROUND SPEAKER
PASSIVE SUB WOOFER
PS-AF610
PS-AC610
PS-AR610
PS-AW610
PASSIVE
SUBWOOFER
PS-AW610
√ Connecting Speaker Wire
Press the tab of the
speaker connector.
Insert the black wire into the black(-)
terminal and the gray wire into the
red(+) terminal.
1
2
•
•
Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang on the wall through the duct (hole).
Caution
•
•
Never touch speaker terminals while the power is on.
Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Components
Connecting Video Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
DVD Player
Video Projector
•
•
Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
In a DVD/CD player, you can select one digital audio input from OPTICAL and COAXIAL.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT(Settop Box)
•
•
•
If using VCR, connect Analog Audio Out to VCR/SAT
Audio In on this unit. If using STB, connect Digital
Out to the SAT Optical connector on this unit.
The Analog Audio and Video In jacks of the main unit
are used for SAT and VCR. You cannot connect both
devices at the same time.
If there is a Digital Out for the satellite/cable STB, it
can be connected to the SAT Optical connector on
the rear panel to provide multi-channel surround. If
there is no Digital Out connector on the STB, connect
the Analog Audio Out connector to the VCR/SAT
Audio In on the unit.
•
•
If the external component has only one Audio Output
jack, connect it to either the right or left Audio Input
jack of the main unit.
Connect the audio cable's red plug to the red jack
and white cable to the white jack.
TV
VCR
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Components
Connecting Audio Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
CD Player
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM and AM Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
AM Loop Antenna
(supplied)
FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the FM
75 COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied to the AM
and terminals.
2. If reception is poor, connect an outdoor single
vinyl-covered wire to the AM terminal.
(Keep the AM loop antenna connected).
The cooling fan dissipates the heat generated inside the unit so that the unit can
be operated normally. The cooling fan is activated automatically to supply cool air
to the unit.
COOLING FAN
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside may
rise and cause damage to it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the AV Receiver
Turning On/Off
REMOTE CONTROL
Press the POWER button of the remote control.
•
This unit will be turned on or set to Standby mode.
MAIN UNIT
Connect the power plug to the outlet.
1
2
Press the POWER button of the main unit.
•
This unit will be turned on or set to Standby mode.
Functions of Dedicated Remote Control
You can operate your AMP, TV, DVD, VCR with one remote control.
See pages 42-45 for more details.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To Select the Function
REMOTE CONTROL
Method 1
Press the FUNCTION button.
•
Each time you press the this button, FM ❈ AM ❈ DVD ❈ VCR/SAT ❈ CD
will be selected in turn.
Method 2
Press CD, VCR/SAT, DVD or TUNER button.
•
You can directly select CD, VCR/SAT, DVD or TUNER.
MAIN UNIT
Press FUNCTION button.
•
Each time you press the this button, FM ❈ AM ❈ DVD ❈ VCR/SAT ❈ CD
will be selected in turn.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Digital/Analog Input
You can listen to sound in Analog 2 Channels or Dolby Digital 5.1 Channel using this unit.
REMOTE CONTROL
For DVD Function
Press the INPUT MODE DIGITAL button.
•
DVD OPTICAL or COAXIAL will be selected.
or
Press the INPUT MODE ANALOG button.
•
DVD ANALOG will be selected.
For CD Function
Press the INPUT MODE DIGITAL button.
•
CD OPTICAL or COAXIAL will be selected.
or
Press the INPUT MODE ANALOG button.
•
CD ANALOG will be selected.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
For DVD Function
Press the INPUT MODE button.
•
DVD OPTICAL or COAXIAL and DVD ANALOG will be selected repetitively.
For CD Function
Press the INPUT MODE button.
•
CD OPTICAL or COAXIAL and CD ANALOG will be selected repetitively.
•
•
You can enjoy Dolby Digital only if you connect the Digital Audio Output jack
of an external audio component to the optical/coaxial Digital Audio Input jack
on the main unit.
The digital input mode is set to either OPTICAL or COAXIAL, depending on
the setting of <SETUP> ❈ <DIGITAL IN>.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain
speakers are used or not.
√
REMOTE CONTROL
Press SPK SELECT button to select the speaker you want.
1
•
Each time you press this button, F.SPK ❈ C.SPK ❈ S.SPK ❈ SW SPK ❈
CROVR ❈ SPK MODE OFF will be selected in turn.
Press …† button to set the speaker mode.
2
To Exit Setup Mode
•
Wait for about 5 seconds or press the SPK SELECT button of the remote control to
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button.
•
•
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
If you play in 2 Channel Stereo, select 'YES' to use Subwoofer and 'NO' not to use.
•
If F.SPK is set to ‘SMALL’, SW SPK is automatically set to ‘YES’.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SETUP button.
1
2
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 1 time.
•
“SPK SETUP” appears in the display.
Press SURROUND button to select the speaker you
3
want.
•
Each time you press this button, F.SPK ❈ C.SPK ❈ S.SPK ❈ SW SPK
❈ CROVR will be selected in turn.
,
Press SELECT (
mode.
) button to set the speaker
4
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
•
•
LARGE : Select when you use large speaker. You can listen to full
range sound.
SMALL : Select this when you use small speaker.
Bass below 100Hz will not be output.
NONE : Select this when you use no speaker.
YES(Subwoofer) : Select this when you use Subwoofer
Setting the Speaker
•
•
•
•
•
F.SPK (Front) : LARGE, SMALL
C.SPK (Center) : LARGE, SMALL, NONE
S.SPK (Surround) : LARGE, SMALL, NONE
SW SPK (Subwoofer) : YES, NO
•
•
Speaker.
CROVR (Crossover Frequency) : 60, 80, 100, 120, 150, 180, 200Hz
•
•
NO(Subwoofer) : Select when you do not use Subwoofer
Speaker.
CROVR: Select the crossover frequency for the best bass
response in your room.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Speaker Listening Distance
√
REMOTE CONTROL
Press the SPK DISTANCE button to select the speaker
1
you want.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W
❈ DIST OFF will be selected in turn.
Press …† button to set the speaker distance.
2
•
For F.L, CEN, F.R, S.W, S.R, S.L Speaker, you can set the distance from
the speaker to listening position between 1~30 feet in intervals of 1 feet.
To Exit Setup Mode
•
Wait for about 5 seconds or press the SPK DISTANCE button of remote control to
select DIST OFF.
•
If the listening position is beyond the range of speaker
distance setup when you place the speaker, set the
speaker distance to the maximum.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SETUP button.
1
2
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 2 times.
•
“DIST SETUP” appears on the display.
Press SURROUND button to select the speaker you want.
3
4
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈
S.W will be selected in turn.
Press SELECT(
) button to set the speaker distance.
,
•
For F.L, CEN, F.R, S.W, S.R, S.L Speaker, you can set the distance from the
speaker to listening position between 1~30 feet in intervals of 1 feet.
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exit Setup Mode.
Setting Speaker Distance
Set the distance from the speaker to listening position in intervals of 1 feet.
•
•
•
•
•
•
•
F.L (Front-Left) : 1 feet ~ 30 feet
CEN (Center) : 1 feet ~ 30 feet
F.R (Front-Right) : 1 feet ~ 30 feet
S.R (Surround-Right) : 1 feet ~ 30 feet
S.B (Surround Center) : 1 feet ~ 30 feet
S.L (Rear-Left) : 1 feet ~ 30 feet
SW (Subwoofer) : 1 feet ~ 30 feet
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Digital Input
You can set the digital input for a DVD/CD player to either OPTICAL or COAXIAL.
MAIN UNIT
Press SETUP button.
1
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 3 times.
2
3
4
•
“DIGITAL IN” appears on the display.
Press SURROUND button to select the DVD or CD function.
•
Each time this button, DVD
CD will be selected in turn.
,
Press SELECT(
) button to set the digital input.
•
Each time you press this button, OPTICAL
COAXIAL will be selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Setting DRC
√
REMOTE CONTROL
Press DRC button.
•
Each time you press this button, DRC : STD ❈ DRC : MAX ❈ DRC : MIN
will be selected in turn.
MAIN UNIT
Press SETUP button.
1
2
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 4 times.
•
“DRC SETUP” appears on the display.
Press SURROUND button.
3
4
•
“DRC : STD” appears on the display .
Press SELECT(
) button to set DRC.
,
•
Each time you press this button, DRC : STD ❈ DRC : MAX ❈ DRC : MIN
will be selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
Setting DRC
•
•
•
STD : Sets DRC effect to standard.
MAX : Sets DRC effect to maximum.
MIN : Sets DRC effect to minimum.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Test Tone
Use test tone to check the speaker connection status or level.
To Automatically Output Test Tone
√
REMOTE CONTROL
Press TEST TONE button.
•
Test signal will be automatically output as follows; F.L ❈ CEN ❈ F.R ❈ S.R
❈ S.L ❈ S.W.
•
During test tone output, press …† button to adjust the speaker output level
from -10 to +10 dB by 1 step.
To Stop Test Tone
•
Press TEST TONE button again.
√
MAIN UNIT
Press SETUP button.
1
2
3
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 5 times.
•
“TEST-T AUTO” appears in the display.
Press SURROUND button.
•
Test signal will be automatically output as follows; F.L ❈ CEN ❈ F.R ❈
S.R ❈ S.L ❈ S.W .
•
During test signal output, press SELECT (
) button to adjust the speaker
,
output level from -10 to +10 dB by 1 step.
To Stop Test Tone
Press SETUP button 1 time.
•
“SETUP MODE OFF” appears on the display and test tone stops.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To Manually Output Test Tone
√
MAIN UNIT
Press SETUP button.
1
•
“SETUP MODE” appears on the display and the unit enters into Setup Mode.
Press FUNCTION button 6 times.
2
3
•
“TEST-T MANU” appears in the display.
Press SURROUND button.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W will
be selected in turn.
,
Press SELECT(
want.
•
) button to set the test tone as you
4
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
To Stop Test Tone
Press SETUP button 1 time.
•
“SETUP MODE OFF” appears on the display and test signal stops.
Test Tone Output
•
•
•
•
•
•
F.L (Front-Left) : -10 ~ +10dB
CEN (Center) : -10 ~ +10dB
F.R (Front-Right) : -10 ~ +10dB
S.R (Surround-Right) : -10 ~ +10dB
S.L (Surround-Left): -10 ~ +10dB
S.W (Subwoofer): -10 ~ +10dB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Speaker Level
You can set the balance and level of speakers
√
Remote Control
Press SPK LEVEL button to select the speaker you want.
1
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W ❈
SPK LVL OFF will be selected in turn.
Press …† button to set the speaker level you want.
2
•
•
•
You can adjust it from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
Default setting value is 00dB.
To Exit Setup Mode
•
Wait for about 5 seconds or press SPK LEVEL button on the remote control to select
SPK LVL OFF.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SETUP button.
1
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 8 times.
2
3
•
“LEVEL SETUP” appears on the display.
Press SURROUND button.
•
Each time you press this button, F.L ❈ CEN ❈ F.R ❈ S.R ❈ S.L ❈ S.W
will be selected in turn.
,
Press SELECT(
you want.
•
•
•
) button to set to the speaker level
4
You can adjust it from -10 to +10dB by 1 step.
The sound gets smaller at -10dB and louder at +10dB.
Default setting value is 00dB
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exits Setup Menu.
Setting Speaker Level
•
•
•
•
•
•
F.L (Front-Left) : -10 ~ +10dB
CEN (Center) : -10 ~ +10dB
F.R (Front-Right) : -10 ~ +10dB
S.R (Surround-Right) : -10 ~ +10dB
S.L (Surround-Left): -10 ~ +10dB
S.W (Subwoofer): -10 ~ +10dB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic ll Mode
This mode provides 5.1 channel sound from 2 channel sources
REMOTE CONTROL
Press
MODE button.
•
Each time you press this button, CINEMA ❈ MATRIX ❈ GAME
❈ PROLOGIC ❈ MUSIC will be selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SURROUND button to select “DPL ll” Mode.
1
•
Each time you press this button, DPL ll ❈ SFE ❈ STEREO will be selected
in turn.
,
Press SELECT(
) button.
2
•
Each time you press SELECT (
) button, CINEMA ❈ MATRIX ❈
GAME ❈PROLOGIC ❈ MUSIC will be selected in turn.
•
Each time you press SELECT (
) button, MUSIC ❈ PROLOGIC ❈
GAME ❈ MATRIX ❈ CINEMA will be selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds.
Dolby Pro Logic ll Mode
•
MUSIC : Provides 5.1 Channel Surround sound to digital, analog
or existing stereo sources such as CD, TAPE, FM, TV and
Stereo VCR.
CINEMA : Adds realism to the movie soundtrack.
MATRIX : You will hear 5.1 Channel Surround sound.
GAME : Enhances the excitement of the game's sound.
PROLOGIC : You will experience a surround effect with just the
front left and right speakers.
•
•
•
You cannot use Dolby Pro Logic ll Mode for multi channel
signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling
frequencies of 32KHz, 44KHz or 48KHz.
Sound will not be output from rear center speaker if PCM
audio signal is mono.
•
•
•
•
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic ll Effect
This function works only in Dolby PRO LOGIC II MUSIC Mode.
REMOTE CONTROL
Press
Press
MODE button to select ‘MUSIC’ Mode.
EFFECT button.
1
2
•
Each time you press this button, C-WIDTH ❈ DIMENSION ❈ PANORAMA ❈
DPL ll EFT OFF will be selected in turn.
Press …† button to select Dolby Pro Logic II effect you
want.
3
•
•
•
C-WIDTH: You can set from 0 to 7.
DIMENSION: You can set from -7 to +7.
PANORAMA: You can Set it ON or OFF.
To Exit Setup Mode
•
Wait for about 5 seconds or press
control to select DLP ll EFT OFF.
Effect button of remote
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SETUP button.
1
2
3
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press FUNCTION button 10 times.
•
“DPL ll MODE”appears on the display.
Press SURROUND button.
•
Each time you press this button, C-WIDTH ❈ DIMENSION ❈
PANORAMA will be selected in turn.
Press SELECT(
,
) button to select Dolby Pro
4
Logic ll effect you want.
To Exit Setup Mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
Dolby Pro Logic llx Effect
•
C-WIDTH : This sets the width of the center image. The higher the setting, the less
sound comes from the center speaker.
•
•
DIMENSION : Incrementally adjusts the sound field (DSP)from the front or rear.
PANORAMA : This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SFE Mode
Refer to the unique sound existing at specific place and you can feel live sound as if you are listening at
actual site.
REMOTE CONTROL
Press SFE MODE button.
•
Each time you press this button, HALL ❈ THEATER ❈ ARENA ❈ CLUB ❈
DOME ❈ STADIUM ❈ CHURCH will be selected in turn.
To Exit Setup Mode
•
Wait for about 5 seconds.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN UNIT
Press SURROUND button to select ‘SFE’ Mode.
1
2
•
Each time you press this button, DPL II ❈ SFE ❈ STEREO will be selected
in turn.
Press SELECT(
) button.
,
•
Each time you press Select (
CLUB ❈ DOME ❈ STADIUM ❈ CHURCH will be selected in turn
Each time you press Select ( ) button, CHURCH ❈ STADIUM ❈
DOME ❈ CLUB ❈ ARENA ❈ THEATER ❈ HALL will be selected in turn.
) button, HALL ❈ THEATER ❈ ARENA ❈
•
To Exit Setup Mode
•
Wait for about 5 seconds.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo Mode
You can select this mode when you listen to sound through the Front Left and Right speakers and subwoofer.
REMOTE CONTROL
Press STEREO button.
“STEREO” appears in the display and Stereo Mode is
selected.
MAIN UNIT
Press SURROUND button to select ‘STEREO’.
Each time you press this button, DPL ll ❈ SFE ❈ STEREO
•
•
will be selected in turn.
To Exit Setup Mode
To Exit Setup Mode
•
Wait for about 5 seconds.
•
Wait for about 5 seconds.
•
When PCM and Analog Stereo signals are input, the
left and right channels are played back in Stereo Mode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
For Surround Mode and Input Signal
o = active, – = inactive
Output Channel
Display Information
Surround Mode
Input Signal
Decoding
SL
SR
Sub
Woofer
L/R
O
C
Display Signal Format
DIGITAL
Channel Status
L, C, R, SL, SR, SW
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
O
O
O
O
O
O
Dolby D Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
Analogique
Dolby Digital 5.1
Dolby Digital 5.1
Pro Logic II
Pro Logic II
Pro Logic II
Pro Logic II
DTS 5.1
DTS 5.1
DTS 5.1
Neo:6
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
DIGITAL
DIGITAL
DIGITAL
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R
DOLBY
(MUSIC,
CINEMA,
MATRIX,
GAME,
PROLOGIC
)
L.PCM
ANALOG
DTS
DTS-ES
DTS 96/24
DTS
DTS
SFE
DTS (5.1)
DTS
L.PCM (Audio)
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
Analogique
-
L.PCM
O
O
O
O
DD+ SFE
DD+ SFE
SFE
DIGITAL
DIGITAL
L.PCM
ANALOG
DIGITAL
DIGITAL
L.PCM
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, C, R, SL, SR, SW
L, R, SW
SFE
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
L.PCM 96KHz
Analogique
DD
-
-
-
-
-
DD
-
-
L, R, SW
STEREO
Stereo
-
-
L, R, SW
Stereo
-
-
L.PCM
L, R, SW
Stereo
-
-
ANALOG
L, R, SW
L/R : Front Speaker (Left/Right) C : Center Speaker SL/SR : Rear Speaker (Left/Right) SW : Subwoofer
•
•
Channel status display are dependent on “Speaker Configuration”.
SFE Mode works 2ch signal.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual
tuning operation.
REMOTE CONTROL
MAIN UNIT
Press FUNCTION button to select
FM or AM.
1
Press TUNER button.
1
•
Each time you press this button, FM ❈ AM will be
repetitively selected.
Select the frequency.
2
•
•
Automatic Tuning :
Select frequency.
Automatic Tuning 1 :
1) Press TUNER MODE button to select PRESET.
2) Press TUNING/CH (
frequency.
2
Press and hold TUNING(
) button to
,
•
•
•
automatically tune in frequency.
,
) button to select the preset
Manual Tuning :
Press TUNING(
) button briefly to
,
Automatic Tuning 2 :
1) Press TUNER MODE button to select MANUAL
2) Press and hold TUNING/CH (
automatically tune in frequency.
increase or decrease the frequency step by step.
) button to
,
Manual Tuning :
1) Press TUNER MODE button to select MANUAL.
2) Press TUNING/CH (
) button briefly to increase or
,
decrease frequency by step by step.
To Listen to Mono/Stereo
How to select MAIN, UNIT, PRESET,
MANUAL
Press MO/ST button on the remote.
•
Each time you press this button, STEREO, MONO
will be selected in turn.
1. Press the SETUP button.
2. Press the FUNCTION button 9 times.
•
If you select MONO in the area with weak reception,
it will help to reduce noise.
This function works only with the Remote Control.
•
“TUNER SETUP” appears in the display.
•
3. Press the SURROUND button.
,
4. SELECT (
) button to select MANUAL
or PRESET.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Radio Stations
You can preset up to 30 FM and AM stations.
REMOTE CONTROL
Ex) If you preset FM 89.10 station in 2ch
Press TUNER button.
1
•
Each time you press this button, FM ❈ AM will be selected in turn.
Press Select button and then TUNING MODE button
to select 89.10.
2
•
Refer to step 2, page 38, to tune in automatically and manually.
Press TUNER MEMORY button.
3
4
•
Tuner number will blink on the display.
Press TUNING/CH(
) button to select preset 2.
,
•
You can select from presets 1 to 30.
Press TUNER MEMORY button.
5
6
•
Tuner number will disappear and station 89.1 will be saved in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station
•
Press TUNING MODE button of the remote control to select the PRESET and press
TUNING/CH ( ) button.
,
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Functions
Sleep Timer Function
You can set the time that this unit will shut itself off.
REMOTE CONTROL
Press the SLEEP button.
•
SLEEP : OFF ❈15 ❈30 ❈45 ❈60 ❈90 ❈120MIN will be selected in turn.
To Check Sleep Timer
Press SLEEP button.
•
•
The remaining time before this unit will shut itself off is shown on the display.
Pressing the button again changes the sleep time from what you have set earlier.
To Cancel Sleep Timer
•
Press SLEEP button until SLEEP : OFF appears on the display.
Mute Function
This function is useful when answering a doorbell or telephone call.
REMOTE CONTROL
Press the MUTE button.
•
MUTE appears on the display.
To Output Sound Again
Press MUTE button again.
•
MUTE will disappear and sound will Output.
•
SLEEP, Mute and Adjust Display function can only be
operated with the remote control.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Function
REMOTE CONTROL
Press the MUTE button.
1
2
3
•
MUTE appears on the display.
Press “0” button five times and then
press ENTER button.
Press …† buttons to select “YES”.
•
The unit will turn automatically back on in 5 seconds.
Caution!
•
•
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Adjust the Display
You can adjust the brightness of the display.
REMOTE CONTROL
Press the DIMMER button.
•
Each time you press this, the brightness of the display will be adjusted.
Using Headphone
Use headphones (not supplied) for private listening pleasure.
Connect the headphone to the headphone jack and listen
to music.
•
Do not turn the volume up too high when you use headphones as It
may damage your hearing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your TV with the Remote Control
Press TV button to set the remote
to TV mode.
1
Press POWER button to turn
on the TV.
2
Point the remote control toward the TV.
3
While holding down POWER button,
enter the code corresponding to your
brand of TV.
4
•
•
If the code matches the TV's code, the TV will be turned off.
If there is more than one code listed for your TV in the table, enter
one at a time to determine which code works.
If TV is turned on or off when you press the
power button of the remote control, the
setting is completed.
5
•
You can use the TV POWER, VOLUME, CHANNEL, MENU and
Numeric buttons (0~9).
•
•
The remote control may not work on some brands of TVs. Also, some operation
may not be possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Brand Code List
Brand
Code Number
Brand
Code Number
Brand
Code Number
ADMIRAL(M.WARDS)
056,057,058
LUXMAN
018
SYLVANIA
018,040,048,054,059,
AMARK
001,015
LXI(SEARS)
019,054,056,059,060,
062,063,065,071
015,017,018,048,054,
059,060,062,072,089
040,054
060,062
ANAM
001,002,003,004,005,
SYMPHONIC
TATUNG
TECHWOOD
TEKNIKA
TMK
061,095,096
006,007,008,009,010,
MAGNAVOX
006
011,012,013,014
018
AOC
001,018,040,048
MARANTZ
MATSUI
003,015,018,025
BELL&HOWELL(M.WARDS)
BROCSONIC
CANDLE
057,058,081
054
018,040
059,060
MGA
018,040
TOSHIBA
019,057,063,071,101
018
MITSUBISHI/MGA
018,040,054,059,060,
075,101
107,109,110,111,113
CETRONIC
CITIZEN
003
VIDTECH
VIDECH
WARDS
018
003,018,025
MTC
NEC
018
059,060,069
CINEMA
097
018,019,020,040,059,
060
015,017,018,040,048,
CLASSIC
CONCERTO
CONTEC
003
054,060,064
018
NIKEI
003
YAMAHA
YORK
018
046
ONKING
ONWA
003
040
CORONADO
CRAIG
015
003
YUPITERU
ZENITH
003
003,005,061,082,083,
084
PANASONIC
006,007,008,009,054,
066,067,073,074
018
058,079
ZONDA
001
CROSLEX
CROWN
062
PENNEY
PHILCO
DONGYANG
LOWE
003,054
003
003,015,017,018,048,
054,059,062,069,090
015,017,018,040,048
054,062,072,112,114,
117,118
054
CURTISMATES
CXC
059,061,063
003
FINLUX
054,109,114
PHILIPS
YOKO
054
DAEWOO
002,003,004,015,016,
017,018,019,020,021,
022,023,024,025,026,
027,028,029,030,032,
034,035,036,040,048,
059,090,099,100
040
LOEWEOPTA
PHONOLA
RADIOLA
SCHNEIDER
AKAI
054,114
054,112,114
PIONEER
063,066,080,091
015,018,059
040
054,112
PORTLAND
PROTON
054
103
QUASAR
006,066,067
017,048,056,060,061,
075
GRUNDIG
108,109,113,119,120,
DAYTRON
DYNASTY
EMERSON
RADIOSHACK
121
108
108
113
113
113
114
114
114
114
114
114
114
114
114
116
003
BLAUPUNKT
SIEMENS
CGE
003,015,040,046,059,
061,064,082,083,084,
085
RCA/PROSCAN
018,059,067,076,077
078,092,093,094
003,019
REALISTIC
SAMPO
IMPERIAL
MIVAR
FISHER
019,065,103
003
040
FUNAI
SAMSUNG
000,015,016,017,040,
043,046,047,048,049,
054,059,060,098
019,061,065,101,102,
103,104
SABA
FUTURETECH
GENERALELECTRIC(GE)
003
BANG&OLUFSEN
BRIONVEGA
FORMENTI
METZ
006,040,056,059,066,
067,068
SANYO
HALLMARK
HITACHI
INKEL
040
015,018,050,059,069
045
SCOTT
SEARS
SHARP
003,040,060,061
015,018,019
015,057,064,101,105,
106,115
WEGA
RADIOMARELLI
SINGER
JCPENNY
JVC
056,059,067,086
070
SINUDYNE
TELEFUNKEN
KTV
059,061,087,088
003,015,040
015
SIGNATURE2000(M.WARDS)
057,058
KEC
SONY
050,051,052,053,055,
101
KMC
LG(GOLDSTAR)
001,015,016,017,037,
038,039,040,041,042,
043,044,054,086
SOUNDESIGN
SPECTRICON
SSS
003,040
001
018
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your DVD (VCR) with Remote Control
Press DVD button to set the remote to
DVD mode.
1
•
If you operate VCR, press VCR button to set the remote to VCR mode.
Press POWER button to turn on the DVD
(VCR).
2
3
4
Point the remote control toward the DVD
(VCR).
While holding down POWER button, enter
the code corresponding to your brand of
DVD (VCR).
•
If the code matches the DVD (VCR)'s code, the DVD (VCR)
will be turned off.
•
If there is more than one code listed for your DVD (VCR) in
the table, enter one at a time to determine which code works.
If DVD (VCR) is turned on or off when you
press the power button of the remote
controller, the setting is completed.
5
•
You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE,
STOP, SKIP, MENU and Numeric button (0~9).
•
•
The remote control may not work on some brands of DVD (VCR)s.
Also, some operations may not be possible depending on your brand
of DVD (VCR).
The remote control will work with Samsung DVDs (VCRs) by default.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Brand Code List
Brand
Code Number
Brand
Code Number
Brand
Code Number
ADMIRAL(M.WARDS)
043,106
MEI
001
001
100
020
,
033
025
TASHIRO
050
047
044
001
001
006
AWIA
044,045,046
088,089,090
001,002,003,004,005,
033
MEMOREX
,
,
033
,
054
,
091
,
TATUNG
,
052
047
033
025
,
092
052
AKAI
TEAC
,
,
,
092
091
ANAM
MINOLTA
MITSUBISHI/MGA
MTC
,
021,
062
TECHNICS
TEKNIKA
,
,
049,
068,
069,
070,
101,
102
092
,
,
033
AOC
091
072
TOSHIBA
,
051
072
AUDIODYNAMIC
BELL&HOWELL(M.WARDS)
BROKSONIC
CANON
019,047,092
MULTITECH
NEC
044,
057
047
091
,
069
TOTEVISION
TAEKWANG
UNITECH
025
087
072
019
019
072
,
048
092
001
,
093
094
033
019,
,
052,057,
,
,
095
OLYMPIC
OPTIMUS
ORION
049
101
103
,
,
,
049,
091
VECTORRESEARCH
VIDEOCONCEPTS
VIDEOSONIC
WARDS
CAPEHART
CITIZEN
011
050
PANASONIC
001
091
019
001
,
004,
033,
049,
067,
CRAIG
050,
072,
096
,
107
001
043
105
019
019
,
020
050
106
,
031,
032,
033
,
CRITERION
CURTISMATHES
051
PENNEY
PENTAX
PHILCO
,
020
020
033
,
072
,
,
054,
072,
100,
001,
031,
032,
033,
044,
,
,
021,
033,
062
,
,
109
091
001,
,
046,
049,
091,
YAMAHA
ZENITH
,
047,048 052,092
,
,
DAEWOO
006
,
007
012
017
,
008
013
018
,
009,
010
015
051
,
094
,
047,048,052,092
011,
,
,
014,
,
PHILIPS
001,
030,
033,
049,
050,
016
091
011
,
,
,
046,
,
066
025
049
011
,
091
DVD Brand Code List
PILOT
DAYTRON
DBX
PIONEER
PORTLAND
QUASAR
019
025
094
,
047
031
095
048
,
052
032
097
053
,
092
Brand
Code Number
EMERSON
,
,
,
044
098
054
,
046
099
055
,
001,
033,
049,067,091,
,
,
,
,
107,
108
DENON
003,032
FISHER
009
100
044
,
,
,
,
,
RICO
036
DOONOON
DMTECH
FISHER
019
017
002
006
012
RCA/PROSCAN
001
033
070
001
,
020
049
091
009
,
021,
031,
032,
FUNAI
,
,
051,
062,
066,
GENERALELECTRIC(GE)
001
,
031
060
021
,
032,
033,
056,
,
,
104
GE
091
REALISTIC
,
,
025,
033
,
HARMAN/KARDON
JVC
GOVIDEO
059,
,
061
044,048
,
054,
091,
010
008
001
004
,
013
HARMANKARDON
HITACHI
019
101,105
000 006
058,071
075 076
080 081
008 009
054 058
092
006
070
020
KENWOOD
LG
020
100
051
,
,
049,
054,
062,
SAMSUNG
,
,
031
072
077
,
032
073
078
,
057
074
079
,
,
,
,
,
MAGNAVOX
MITSUBISHI
ONKYO
HQ
,
,
,
,
,
005,
016
014
INSTANTREPLAY
JCL
001,
033,
049,
091
,
004
011
021
006
,
001,
025
033
SANYO
,
,
046,
048,
050,
OPTIMUS
PANASONIC
PROSCAN
PHILIPS
PIONEER
RCA
JCP
,
,
093,
100
JCPENNY
047,
048,
052,
062,
091,
SANSUI
SCOTT
092
,
051
100
021
105
,
054
101
025
106
,
057,
069,
004,
023
JVC
001
064
047
019
024
029
020
,
033
065
050
020
025
030
025
054
,
047,
052,
063,
,
,
007,
011,
022,025
,
,
092
SEARS
SHARP
SINGER
,
,
006
KENWOOD
,
,
052,
092
043,
,
SAMSUNG
SANYO
000,
027
LG(GOLDSTAR)
,
,
021,
022,
023,
096
002
,
,
026,
027,
028,
SIGNATURE2000(M.WARDS)
SHINTOM
SONY
043,
044,
054,
100,
106
SONY
015, 020
011
,
,
050
096
THETADIGITAL
TOSHIBA
YAMAHA
ZENITH
LXI(SEARS)
,
,
044,
048,
050,
034,
035
040
084
,
036
041
085
,
037
042,082
086
,
038,
004, 018
009, 033
004, 024
026
053,
,
055,
062,
100
039,
,
,
,
MAGIN
072
083,
,
,
MAGNAVOX
001
066
001
092
025
,
031
,
032,
033,
049,
STS
020
TAEGWANG
PS2
,
067,
091
SYLVANIA
001
091
044
009
,
033,
044,
049,
066,
028
MARANTZ
MARTA
,
019
110
050
,
033,
047,
052,
X-BOX
029
,
SYMPHONIC
TANDY
APEX
030
,
MARANTZ
031
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Check
Remedy
Symptom
•
Connect the power plug to the outlet.
Can't turn it on.
•
Is the power code plugged into the outlet?
It does not work when the
button is pressed.
•
Is there static electricity in the air?
•
Disconnect the power plug and connect it
again.
•
Are the speaker and external
component connected properly?
•
•
•
•
Properly connect it.
Press Mute button to cancel the function.
Adjust the volume.
•
•
•
Does the Mute function work?
Is the volume set to minimum?
Sound is not produced.
Refer to pages 20~21 to select LARGE,
SMALL or YES.
Is the speaker setup selected to
NONE?
Picture does not appear when
the function is selected.
•
Isn’t the external component connected
properly?
•
Properly connect it.
•
•
Are the batteries exhausted?
Is the distance between remote
control and main unit proper?
•
•
Replace with new batteries.
Operate at close distance.
Remote controller does
not work.
•
Is the left/right speaker or left/right
input/output code connected
properly?
•
Check the left/right channel and properly
connect it.
The sound from each
device is changed during
stereo playback.
•
Is AM or FM antenna connected
properly?
•
•
Properly connect the antenna.
Can't receive
broadcasting.
If the input strength of antenna connector
is weak, install the FM antenna in a place
with good reception.
•
•
•
Is the surround speaker connected
properly?
•
•
Refer to pages 10~11 to connect it properly.
Refer to pages 20~21 to select LARGE or
SMALL.
There is no sound from
surround speaker.
Is S.SPK (Surround) set to NONE in
Speaker Setup?
•
Refer to pages 30~37 to select other
Surround Mode.
Is Surround Mode selected to Stereo?
•
Is the center speaker connected properly?
•
Refer to pages 10~11 to connect it properly.
•
Is C.SPK (Center) selected to NONE in
Speaker Setup?
•
Refer to pages 20~21 to select LARGE or
SMALL.
There is no sound from
center speaker
•
Is the Surround Mode selected to Stereo?
•
Refer to pages 30~37 to select other
Surround Modes.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check
Remedy
Can't select Dolby Pro
Logic ll Mode.
•
•
Select 2 channel Dolby Digital, PCM, and
Analog input signal.
•
•
Is the input signal selected properly?
Is analog input selected?
There is no sound when
playing DTS encoded DVD
and CD.
Check whether digital external component
is properly connected and refer to page 22
to select the digital input.
Product Protection Function
Heat Protection
•
If PROTECTION appears on the display,
check whether speaker terminal is shorted
and then turn on the device.
•
Protection function works if the main unit is overheated or power
transformer is overheated.
"
" appears in the display when this function
works.
- If speaker terminal is shorted
- If speaker cord is shorted
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply
120V, 60 Hz
Standby Power Consumption
Power Consumption
Weight
0.9W
95W
9.25Ibs
GENERAL
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Frequency Response
Usable Sensitivity
16.9 x 2.6 x 13.7 inches
41°F ~ 95°F
10%~75%
87.5~108.0MHz
12dBf
S/N Ratio
Distortion
Stereo Separation
Tuner Output Level
Frequency Response
S/N Ratio
Usable Sensitivity
Distortion
Rated Output
Front Speaker(Left+Right)
Center Speaker
MONO/STEREO 55/55dB
MONO/STEREO 0.3/0.8%
30dB
1KHz, 75KHz Dev
520~1720KHz
40dB
60dBµV/m(Loop Antenna)
2% (MOD:80%)
20Hz~20KHz/THD = 10%
4Ω 100W/CH
4Ω 100W/CH
FM TUNER
AM TUNER
Surround Speaker(Left+Right)
Subwoofer
4
4
100W/CH
100W/CH
Ω
Ω
AMPLIFIER
Input Sensitivity/Impedance
S/N Ratio(Analog Input)
Separation(1KHz)
450mV/47k
80dB
60dB
Ω
Analog Input
Digital Input/96KHz PCM
TV Format
20Hz~20KHz(±3dB)
20Hz ~44KHz(±3dB)
NTSC/PAL
FREQUENCY
RESPONSE
Input Level/Impedance
Output Level/Impedance
Video Frequency Response
Component Video Frequency Response
S/N Ratio
1Vp-p/75
Ω
VIDEO
OUTPUT
1Vp-p/75
Ω
5Hz to 10KHz(-3dB)
5Hz to 40KHz(-3dB)
60dB
Speaker system
Front / Surround
4Ω x 4
Center
Subwoofer speaker
S
P
E
A
K
E
R
S
Ω
Impedance
4
Ω
4
Rated input
100W
100W
200W
100W
200W
Maximum input
Dimensions (W x H x D)
Weight
200W
3.5 x 6.0 x 3.5 inches
1.3 Ibs/1.1Ibs
7.9 x 3.5 x 3.6 inches 6.9 x 12.6 x 15.0 inches
1.4 Ibs 11.5 Ibs
❈S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES-17 filter.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
S a m s u n g Lim it e d Wa rra n t y
S a m s u n g Ele c t ro n ic s Ca n a d a In c . (S ECA), warrants that this product is
free from defective m aterial and workm anship.
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to im proper workm anship or
defective m aterial SECA will repair or replace the product at its option.
All warranty repairs m ust be perform ed by a SECA authorized service
centre. (The nam e and address of the location nearest you can be obtained by
calling toll free 1 -8 0 0 -7 2 6 -7 8 6 4 or visiting our web site at
w w w .s a m s u n g .c a )
La b o u r
P a rt s
o n e (1 ) ye a r (c a rry-in )
o n e (1 ) ye a r
On carry-in m odels, transportation to and from the service centre is the
custom er’s responsibility.
The original dated sales receipt m ust be retained by the custom er and is the
only acceptable proof of purchase. It m ust be presented to the authorized
service centre at the tim e service is requested.
Exc lu s io n s
This warranty does not cover dam age due to accident, fire flood and/or other
acts of God; m isuse, incorrect line voltage, im proper installation, im proper or
unauthorized repairs, com m ercial use, or dam age that occurs in shipping.
Exterior and interior finish, lam ps and glass are not covered under this
warranty. Custom er adjustm ents which are explained in the instruction
m anual are not covered under the term s of this warranty.
This warranty will autom atically be voided for any unit found with a
m issing or altered serial num ber. This warranty is valid only on products
purchased and used in Canada.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Bicycle 60 4353 User Guide
Ramsey Electronics Battery Charger LABC1 User Guide
RCA Camcorder EZ2100 User Guide
Ricoh GPS Receiver 8542 User Guide
Rimage Pet Fence RAS10 User Guide
RocketFish Surge Protector RF AVS7ES User Guide
Samsung Microwave Oven CM1029 User Guide
Sanyo Projector PLC SU07N User Guide
Schneider Optics Camera Lens PC SUPER ANGULON 28 mm f 28 User Guide
Schwinn Exercise Bike 122 User Guide