Radio Frequency
W i r e l e s s
900
M H z
S p e a k e r s
w it h 9 0 0 M H z Tr a n s m it t e r
Fr e e dom Fr om Wi r e s
lis te n a n y w h e r e in your hom e
W S P 2 0 0
Download from Www.Somanuals.com. All Manuals Search And Download.
CO N TRO L LO CATIO N S
TRANSMITTER
1) LED Indicator (Power ON)
2) Power OFF Switch and Channel Selector
3) AUDIO IN Jack (L) - Connect to Music Source
4) AUDIO IN Jack (R) - Connect to Music Source
5) DC Input Jack
2
1
5
4
3
SPEAKER
6) Frequency Channel Selector
7) Tone Control Knob
8) Power OFF and Volume Control Knob
9) DC Input Jack
10) MODE Switch (To Select Left/ Mono or Right Channel)
11) Battery Compartment
9
DC IN
W
S
-
9
1
W
I
R
E
L
E
A
S
N
S
C
S
P
E
A
K
E
R
P
S
Y
S
T
E
1
M
I
M
P
E
X
W
D
M
E
OU
M
A
I
U
M
T
P
U
T
O
S
W
"
E
D
R
P
O
E
R
S
O
U
R
C
E
A
D
C
C
:
:
1
2
0
V
6
0
H
z
T
A
T
E
R
I
E
"
(
.
I
5
V
)
x
8
B
M
A
D
E
N
C
H
I
N
A
6
10
11
IN USE
TIME.
TTERIES IF NOT
PERIOD OF
A
REMOVE
B
FOR
7
8
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IN STALLIN G THE TRAN SMITTER
You need to properly set up the Transmitter to send a wireless signal to the
Speakers. There are two things you must do. First, provide power to the
Transmitter, and second, connect the Transmitter to the Audio Source.
1) CONNECTING POWER
(A) DC OPERATION
Your Transmitter is supplied with a Battery
SIZE "AA" x 4 PCS.
Tray. Insert four (4) x AA Alkaline batteries
(not supplied) to the battery slot as indicat-
ed. Attach the battery tray to the bottom
of the Transmitter unit. Be sure to insert
1
2
3
CHANNEL
OFF
the three plastic locks of the battery tray
into the openings of the transmitter base,
then slide to the front for firm attachment.
Battery Tray
(B) AC OPERATION
Your system is supplied with one 600 mA
AC Adapter. Insert the plug of the AC
adapter in to the DC Jack at the rear of the
Transmitter, then plug the other end of the
AC Adapter in to a conveniently located
electrical wall outlet.
DC 6V
L
-
AUDIO IN
-
R
You are recommended to use the AC
Adapter as often as possible, as this is
still the most economical power source!
2) CONNECTING TO YOUR AUDIO SOURCE
•
Connect one end of the supplied patch
cord to the Transmitter's Left (WHITE) and
Right (RED) AUDIO IN Jacks.
(eg.:TV, VCR, HOME STEREO)
AUDIO SOURCE
AUX. OUT
L
R
•
Then connect the other end of the patch
cord to the Audio Sources Left (WHITE)
and Right (RED) AUDIO OUT Jacks.
L
R
R
DC 6V
L
-
AUDIO IN
-
R
AUDIO IN
L
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IN STALLIN G A SPEAKER
CONNECTING POWER
(A) DC OPERATION (with optional BP200SP
Battery Pack sold on page 11)
Speaker
Unit
•
Open the battery cover located at the back of
the Speaker unit. Insert the battery making
sure the side with the contacts (located on
the top edge) is inserted to make contact
with the coil springs inside the compart-
ment. Push the battery all the way in until
you feel resistance from the coil springs
inside the compartment. Replace the battery
cover making certain the cover is secure
prior to moving the Speaker.
DC IN
MODE
L
-
MONO
-
R
W
M
S
P
2
0
0
W
I
R
E
L
E
A
S
N
S
C
S
P
E
A
K
E
R
P
S
Y
S
T
E
I
M
P
E
D
E
OU
M
A
X
I
M
U
M
T
P
U
T
O
W
E
R
P
O
W
E
R
S
O
U
R
C
E
A
D
C
C
:
:
1
B
2
A
0
T
V
T
6
0
H
z
S
E
R
I
E
"
D
"
(
1
.
5
V
)
x
8
M
A
D
E
I
N
C
H
I
N
A
Note: Be sure the battery cover is secure -
a falling battery could cause personal injury
or damage to equipment.
Wall
Outlet
(B) AC OPERATION
Speaker
Unit
•
Insert the power cord of the large sized 1300
mA AC Adapter (provided) into the DC IN
Jack located at the back of the Speaker unit.
DC IN
MODE
L
-
MONO
-
R
•
Plug the other end of the AC Adapter into a
conveniently located electrical wall outlet.
AC
Adapter
1300 mA
(C) MODE SWITCH
•
For normal stereo use, designate one Speaker
as LEFT channel and the other as RIGHT
channel. Simply set one Speaker to “L” for
Left and one to “R” for RIGHT. If you are
using a monaural system, set both speakers
to the MONO position (middle).
Follow the same steps, as completed above,
for the other Speaker.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
O PERATIO N
Follow these steps to obtain maximum listening performance
1) Make sure that your Transmitter and Speakers are set up according to
the procedures given in this manual.
2) Turn on your Audio Source.
3) Switch the Transmitter to a Frequency Channel (Channel 1, 2, or 3) that
has no interference.
Refer to CHANNEL SELECT below for Precision Frequency Lock-In Tuning.
4) Rotate the CHANNEL Knob on the front of the Speakers to select the
same channel (Channel 1, 2, or 3) selected on the Transmitter.
5) Turn ON each Speaker (Left and Right Speakers) by rotating the
VOLUME Control Knob. A ‘click’ will be heard and the Power ON
Indicator (Red) will glow, yet when a Strong Transmission Signal is
received from the Transmitter, the Red Indicator will turn green.
6) Set each Speaker’s MODE switch to L (for the Left Stereo Speaker) and R
(for the Right Stereo Speaker) or MONO (if your sound source is mono-
phonic) as desired.
7) Adjust each Speaker’s VOLUME Control and Tone Control Knobs to a
comfortable listening level to meet your your personal preference.
Be sure to turn off the Speakers and Transmitter when you are not using
them.
CHANNEL SELECT
The popular 900 MHZ High Frequency Technology is being widely applied to
Mobile Phones, Cordless Telephones and many more items to come. If you
receive interference from some of these devices, you might be able to reduce
the interference by switching from one channel to another. There are altogether
3 channels in this system. Simply adjust the transmitting frequency from the
Transmitter by switching to an appropriate channel, then rotate the Channel
Knob of each Speaker to the same channel. When the signal Indicator turns
GREEN and good quality sound output can be heard, you have found the
proper channel. The built in Phase Locked Loop (PLL) circuit will lock-in the
transmitting and receiving frequency to prevent it from drifting. You do not
have to fine tune your Speakers constantly in order to be tuned in for good
sound reproduction.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY O PERATIO N
TRANSMITTER
When the Transmitter is operated by fresh Alkaline batteries (four (4) AA cells-
not included) the Transmitter will play for approximately 4-6 hours continuously.
Once the battery power begins to decrease, you will hear static sound from the
Speakers. This indicates that you have to replace the batteries. If left unattended,
transmitter signal will be decreased until the Speaker NOISE MUTE function
activates and shuts off all sound to the Speakers. To avoid this, you may use the
supplied AC Adapter so that your playing hours will not be interrupted.
SPEAKERS
The Speakers may be powered using the optional BP200SP Battery Pack. This long
play battery allows up to 10 hours of continuos play without the need for AC
power and may be recharged hundreds of times.
See the back of this instruction book for ordering information.
WARNING: When not using batteries for a long period of time, remove batter-
ies to prevent leakage in the compartment. Always use fresh batteries for
replacement.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TRO UBLESHO O TIN G
If you follow all the instructions in this manual, you should have no problems
with your WSP200 Wireless Speaker System. However, in case you can not
make the system work, please read the TROUBLESHOOTING section carefully.
Do not return to your dealer immediately! Check and follow these guides - you
probably can resolve your problems without much difficulty.
PROBLEMS
SOLUTIONS
No Sound
Be sure that both Speakers and the Transmitter are properly
powered either by the AC Adapter jacks being firmly
plugged in OR by fresh Alkaline batteries in the transmitter.
Be sure the Audio Source is turned ON and operating.
Distorted Audio
The Speakers are placed beyond the transmitter’s effective
range (Approximately 125 feet). You need to bring the
Speakers closer to the Transmitter.
The Transmitter is located too close to the screen of your TV
set or Computer Monitor (The Screens’ magnetic field can
cause some interference to the Transmitter).
Other 900 MHz transmissions are being picked up by the
Speaker’s receiver. (Likely from a nearby 900 MHz cordless
telephone). To avoid such interference, change to a new
Frequency Channel for the Speakers and the Transmitter.
The Batteries on your sound source are too low and should
be replaced.
Check the Battery Levels of your Transmitter and
Speakers.The batteries may be exhausted and need to be
replaced or recharged (if using the BP200SP for the speakers).
Background Noise or Hiss If you have reversed some of the operation procedures (as
given on page 5, 1st paragraph Points 1 through 7) so that
the Speakers are turned on first, followed by the
Transmitter and finally transmitting music from your sound
source, some noticeable background noise/ hiss can be
heard. This is rather normal, as it is merely noise generated
from the Pilot Signal. When High Quality music is transmit-
ted through the Transmitter, the Pilot Signal will cease and
this background hiss will disappear.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIO N S
TRANSMITTER
Operating Frequency
912 - 914MHz
Channel 1: 911.950 MHz
Channel 2: 912.925 MHz
Channel 3: 913.900 MHz
Power Sources
a) AC Adapter (AC 120/ 60 Hz~DC 6V 600mA)
Supplied
b) DC four (4) x AA 6V Alkaline Batteries
(Not Included)
Transmitter Dimensions
6" (H) x 3 1/ 4" (W) x 4 3/ 8" (D)
RECEIVER SPEAKER(S)
Output Power
16 Watts RMS (8 Watts per Channel)
Receiving Frequency
Signal to Noise Ratio
Channel Separation.
Distortion
911.9 - 9.13.9 MHz
55 dB
30 dB
< 2%
Operating Range.
125 Feet
Speaker Elements
2" Tweeter, 5" Woofer
Digital
Phase Locked Loop (PLL)
Automatic Noise Mute Function
Speaker Dimensions
Weight (Transmitter & Receiver Speakers)
Standard
11" (H) x 6 1/ 2" (W) x 8 3/ 4" (D)
15.25 lbs
Specifications are typical; individual units may vary.
Specifications are subject to change for improvement without notice.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RCA ACCESSO RIES
The following RCA accessories are available through your RCA dealer or:
ORDER BY PHONE:
ORDER BY MAIL:
Have your Visa, MasterCard or
Discover Card ready and call the
toll-free number listed below.
This number should only be
used to place orders.
Complete order form on page 11
and mail to:
RCA Accessories
PO Box 8419
Ronks, PA 17573
1-800-338-0376
D9 1 8 SURGE PRO TECTO R PLUS
Power surges can enter and destroy your valuable equipment from many
sources - cable, phone lines, satellite dishes or electrical connections. Guard
your vulnerable equipment against potential damage from power surges or
other electrical disturbances.
Features include:
- 3-Way Surge Protection
- 8 Outlets plus Coaxial, Phone & AC Line
- $10,000 Equipment Guarantee
- Lifetime Warranty
D918
†
$ 4 9 9 5
RCUSAT1 UN IVERSAL REMO TE
Universal Remote Controls 4 Devices, TV, VCR, Satellite or Cable Box, and
Audio System
Features include:
- Universal DSS and DBS Compatibility
- Menu and Guide Controls
RCUSAT1
†
- Picture-In-Picture Controls
- Code Search For Easy Programming
$ 2 9 9 5
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BP2 0 0 SP O PTIO N AL BATTERY PACK
The BP200SP Battery Pack allows up to 10 hours of continuous play without the
need for AC Power. Great for using your Speakers in your yard or on your
balcony or patio - where AC power may not be readily available.
Features Include:
- May be charged hundreds of times
- 12V, 4.5 Amp - hour Nominal
- Maintenance-free
- No “memory effect”
BP200SP
†
$ 3 9 9 5 p e r u n it
O RDER FO RM
Name
Address
City
State
Zip
Day Time Phone Number
❑ Money Order Enclosed
❑ Check Enclosed
Credit Card:
❑ Visa
❑ MasterCard
❑ Discover
Card Number
■■■■-■■■■-■■■■-■■■■
Expires: ____/____/____
Signature
ITEM
PRICE
QTY
TOTAL
D918 Surge Protector
$49.95
RCUSAT1 Universal Satellite Remote
$29.95
$39.95
BP200SP Battery Pack
Add Applicable Sales Tax
Include Post & Handling
Total Amount of Order
$5.00
† Tax, Shipping & Handling, Charges Apply © 1997 Thomson Consumer Electronics, Inc.
Trademark(s) ® Registered Marca(s) Registrada(s)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
O N E YEAR LIMITED WARRAN TY
Thomson Consumer Electronics, Inc. warrants that for one year from the date of
purchase this product is free from defects in material and workmanship. If the
item is defective within that period, return it at your expense to the dealer from
whom it was purchased together with proof of purchase for replacement. The
exchange unit is under warranty for the remainder of the original product’s
warranty period. This warranty excludes defects or damage due to misuse,
abuse, neglect or acts of God, including but not limited to lightning damage.
The foregoing represents Thomson’s sole obligation under this warranty.
This warranty gives you specific legal rights, and you may have other rights
which vary from state to state. For purchases outside the United States, contact
your dealer for warranty information.
©Thomson Consumer Electronics, Inc.
Product Exchange Center
32B Spur Drive
El Paso, Texas 79906
1J1513
Trademark(s) ® Registered
Marca(s) Registrada(s)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|