HW-H750
HW-H751
User manual
Wireless Audio - Soundbar
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service, please register your product at
'This Nanum Gothic Eco font is provided by NAVER'
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates important instructions
accompanying the product.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•This apparatus shall always be connected to a AC outlet with a protective grounding connection.
•To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
CAUTION
•Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the
apparatus.
•To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must
be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required,
it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the
fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is
no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to
a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires
directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As
these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN
or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY
THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
PRECAUTIONS
68.6mm
99.1mm
99.1mm
99.1mm
Ensure that the AC power supply in your house complies with the power requirements listed on the
identification sticker located on the back of your product. Install your product horizontally, on a suitable
base (furniture), with enough space around it for ventilation 7~10 cm. Make sure the ventilation slots are
not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit
is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet.
Unplug the unit if you intend to leave it unused for a long period of time.
,
from the wall outlet. Voltage peaks due to lightning
could damage the unit.
her
heat sources.
This could lead to overheating and cause the unit
to malfunction.
.. , and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect
the power cable from the AC supply if the unit
malfunctions. Your product is not intended for
industrial use. It is for personal use only.
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble, or overheat the
batteries.
Condensation may occur if your product has been
stored in cold temperatures. If transporting the
unit during the winter, wait approximately 2 hours
until the unit has reached room temperature before
using.
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS
2
FEATURES
17 FUNCTIONS
2
Licenses
17 Input Mode
17 ARC (HDMI OUT)
18 Bluetooth
20 NFC
3
3
SAFETY INFORMATION
Safety Warnings
21 TV SoundConnect
22 USB
4
Precautions
23 Using the Network Standby On function
23 Using the AUTO POWER LINK Function
24 Using the Multiroom Link
6
6
GETTING STARTED
Before reading the User’s Manual
6
What’s Included
26 Software update
7
7
DESCRIPTIONS
Front/Bottom Panel
27 TROUBLESHOOTING
8
Rear Panel
28 APPENDIX
28 Specifications
9
REMOTE CONTROL
9
Remote Control Buttons and Functions
11 CONNECTIONS
11 Installing the Wall Mount
12 Detaching the Wall Mount
13 Connecting the Wireless Subwoofer
14 Attaching the Toroidal Ferrite Core
to the Subwoofer Power Cord and
Soundbar Power Cord
15 Connecting an External Device using an
HDMI cable
16 Connecting an External Device using
Optical (digital) cable or Audio
(analogue) cable
16 Assembling the Cable Clip
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
+ Icons used in this manual
Icon
Term
Definition
Indicates a situation where a function does not operate or settings may be
canceled.
Caution
Note
Indicates tips or instructions on the page that help you operate a function.
+ Safety Instructions and Troubleshooting
1) Be sure to familiarise yourself with the Safety Instructions before using this product. (See page 3)
2) If a problem occurs, check Troubleshooting. (See page 27)
+ Copyright
©2014 Samsung Electronics Co.,Ltd.
All rights reserved; no part of this user’s manual may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
WHAT’S INCLUDED
Check for the supplied accessories shown below.
(Wall Mount L: 1EA)
(Wall Mount R: 1EA)
Remote Control / Lithium
Battery (3V : CR2032)
User Manual /
Quick Guide
Bracket-Wall Mount
Wall Mount Guide
(Holder-screw1: 2EA)
(For power cable : 2EA)
(Holder-screw2: 2EA)
Holder-Screw
Power Cord
USB Cable
DC Adapter
Cable Clip
Toroidal ferrite core
AUX Cable
NFC Sticker
● The appearance of the accessories may differ slightly from the illustrations above.
● Use the dedicated USB cable to connect external USB devices to the unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTIONS
DESCRIPTIONS
FRONT/BOTTOM PANEL
AUX IN
(Function) Button
Connect to the Analogue
output of an external device.
Selects the D.IN, AUX, HDMI, BT, TV, USB input.
●
While the unit is powered on, pressing the (
button for more than 3 seconds sets the button
to act as MUTE button. To cancel MUTE button
)
(USB Port)
setup, press the (
3 seconds again.
) button for more than
Connect USB devices such as
MP3 players here to play files
on the devices.
AUX IN
VACUUM
TUBE AMP
Display
Volume +/-
Displays the current mode.
Controls the volume level.
●
If there is no input from the
product or remote control for
15 seconds, the display will
turn off automatically.
The numeric value of the
volume level appears in the
front panel display.
●
The display will not turn off
automatically in BT READY,
TV READY, and USB Playing
modes.
(Power) Button
Turns the Soundbar on and off.
● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
● Do not bring cellular phones or mobile devices near the vacuum tube amp, or put other electronic
devices on the top of the product. Signals from these devices can cause noise or distortion in the
audio.
● Do not let children touch the product's surface when the set is on. It will be hot.
● Open the USB COVER to use USB or AUX port.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTIONS
REAR PANEL
WPS/Wi-Fi SETUP Button
Press this button to connect your
Soundbar to your network using
WPS or Wi-Fi setup.
DC 24V (Power Supply In)
Connect the DC power adaptor to the
power supply jack, and then connect
the AC power adaptor plug to a wall
outlet.
SPK ADD Button
Press the button to
connect Soundbar to the
HUB. (not supplied)
LAN
Lets you connect to a network
using a LAN cable.
HDMI IN
Inputs digital video and audio
signals simultaneously using an
HDMI cable. Use when
connecting a supported external
device.
HDMI OUT (TV)
Outputs digital video and audio signals
simultaneously using an HDMI cable.
OPTICAL IN
Connect to the digital (optical)
output of an external device.
● When disconnecting the power cable of the AC power adaptor from the wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between
components are complete.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
SOURCE
Press to select a source connected to the Soundbar.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the AUDIO SYNC buttons to sync the
audio with the video. Use the #,$ buttons to set the audio delay
between 0 ms and 300 ms. In USB mode, TV mode, and BT mode,
the Audio Sync function may not work.
Press and hold the AUDIO SYNC button on the remote for over
7 seconds to activate Wi-Fi SETUP function.
DIMMER/Anynet+
DIMMER : Press the DIMMER/Anynet+ button to control the
brightness of the VACUUM TUBE AMP. DIMMER does not function for
30 seconds after you turn on the product for the very first time.
Anynet+ : Press and hold the DIMMER/Anynet+ button for more than
5 seconds to turn the Anynet+ function and AUTO POWER LINK
function on or off. The Anynet+ function lets you control the
Soundbar with the remote from an Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable. See
page 23 for details about AUTO POWER LINK.
TREBLE BASS
Press to select Treble or Bass. Then, use the #,$ button to adjust
the Treble or Bass volume from -3 to +3.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
POWER
Turns the Soundbar on and off.
VOLUME
Adjusts the volume level of the unit.
Skip Back
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
Play/Pause
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
SOUND EFFECT
Press to select a sound effect mode.
Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD),
Surround Sound Expansion will automatically be turned OFF.
WOOFER
You can control the woofer volume.
Press the #,$ button to increase or decrease the subwoofer
volume. You can set it from SW -6 to SW +6.
Press and hold the WOOFER button on the remote for over 5 seconds
to activate SPK ADD function.
Surr.Sound (Surround Sound Expansion)
Press the Surr.Sound button on the remote to add depth and
spaciousness to the sound.
When you select SURROUND SOUND AUTO: If the sound source has
more than 2 channels, SURROUND SOUND ON turns on
automatically. If the sound source has 2 channels (stereo) or less,
SURROUND SOUND OFF is selected automatically.
Press and hold the Surr.Sound button on the remote for over 5
seconds to activate WPS function.
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn the 2. Insert a 3V lithium battery. Keep the
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix
it in place.
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '' marks side
by side as shown in the figure above.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTIONS
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
+ Installation Precautions
●
Install on a vertical wall only.
●
For the installation, avoid a location with high temperature or
humidity, or a wall that cannot sustain the weight of the set.
●
●
Check the strength of the wall. If the wall is not strong enough
to support the unit, reinforce the wall or install the unit on a
different wall that can support the unit's weight.
5 cm or more
Purchase and use the fixing screws or anchors appropriate for
the kind of wall you have (plaster board, iron board, wood,
etc.).
If possible, fix the support screws into wall studs.
●
Purchase wall mounting screws according to the type and
thickness of the wall you will mount the Soundbar on.
-
-
Diameter : M5
Length: L 35 mm or longer recommended
●
●
Connect cables from the unit to external devices before you
install it on the wall.
Make sure the unit is turned off and unplugged before you
install it. Otherwise, it may cause an electric shock.
1. Place the installation guide against the wall surface.
•
•
The installation guide must be level.
Install at least 5 cm below the TV, if the TV is mounted on
the wall.
2. Mark the location where the screws will go through on the wall
using a pen, and then remove the installation guide.
3. Fasten the wall mounts and screws to the marked locations.
•
The left and right mounts are different shapes.
4. Secure the two holder screws to the screw holes on the back of
the Soundbar's main body, one on the left and one on the
right.
5. Dust may be introduced into the Soundbar's inside if mounted
on the wall. Make sure to keep the USB COVER closed.
Using the Soundbar with Wall Mount
[Wall Mounting the Soundbar]
6. Set the holder screws on the back of the Soundbar into the
grooves of the wall mount. For safe installation, make sure to
push the holder screws all the way to the bottom of the
grooves.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
DETACHING THE WALL MOUNT
1. Pull the Soundbar upwards as shown in the figure to separate
it from the wall mount.
Using the Soundbar with Wall Mount
[Detaching the Soundbar from the Wall Mount]
● Do not hang onto the installed unit and avoid striking or dropping the unit.
● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an
injury or damage the product.
● When the unit is installed on a wall, please make sure that children do not pull any of the
connecting cables, as it may cause it to fall.
● For the optimal performance of a wall mount installation, install the speaker system at least 5 cm
below the TV, if the TV is mounted on the wall.
● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it
is unlikely to fall.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit and subwoofer are turned on. If the LINK indicator does not light
when the main unit and subwoofer are turned on, please set the ID by following the procedure below.
Complete this process within 30 seconds after the Link Indicator on the subwoofer starts blinking.
1. Plug the power cords of the main unit and
subwoofer into an AC wall outlet.
● Before moving or installing the product,
be sure to turn off the power and
disconnect the power cord.
2. Confirm that the main unit is off (in STANDBY
Mode).
● If the main unit is powered off, the
wireless subwoofer will be in standby
mode and the STANDBY LED on the
upper side will come on after the LINK
indicator (Blue LED) blinks for 30 seconds.
● If you use a device that uses the same
frequency (2.4GHz) as the Soundbar near
the Soundbar, interference may cause
some sound interruption.
● The transmission distance of the wireless
signal between the main unit and
subwoofer is about 10 m, but may vary
depending on your operating
environment. If a steel-concrete or
metallic wall is between the main unit and
the wireless subwoofer, the system may
not operate at all, because the wireless
signal cannot penetrate metal.
● If the main unit doesn't make a wireless
connection, follow steps 1-6 in the left
hand column to retry the connection
between the main unit and wireless
subwoofer.
3. Press the ID SET button on the back of the
subwoofer with a small, pointed object for 5
seconds.
•
The LINK indicator (Blue LED) on the
subwoofer blinks quickly.
4. While the main unit is powered off (in STANDBY
mode), press and hold the MUTE
(
)
on the
remote control for 5 seconds.
5. The ID SET message appears on the Soundbar's
display.
6. To finalise the link, turn the main unit’s power on
while the subwoofer’s LINK LED blinks.
•
•
•
The main unit and the subwoofer should
now be linked (connected).
The LINK indicator (blue LED) on the
subwoofer should be on and solid blue.
If the LINK indicator is not solid blue, the
linking process has failed. Turn off the main
unit and start again from Step 2.
•
You can enjoy better sound from the wireless
subwoofer by selecting a Sound Effect.
(See page 10)
● The wireless receiving antenna is built into
the wireless subwoofer. Keep the unit
away from water and moisture.
● For optimal listening performance, make
sure that the area around the wireless
subwoofer location is clear of any
obstructions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
ATTACHING THE TOROIDAL FERRITE CORE TO THE
SUBWOOFER POWER CORD AND SOUNDBAR POWER CORD
You can reduce noise caused by electromagnetic radiation by fitting the ferrite core to the your subwoofer
power cord and Soundbar power cord.
1. Unlock and open the ferrite core.
2. Wind the Subwoofer power cable and Soundbar power cable around the ferrite core twice.
(Start winding 5 to 10 cm away from the core).
3. Close the ferrite core by pressing it until it it clicks.
<Subwoofer Power Cable>
<Soundbar Power Cable>
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE
HDMI is the standard digital interface for connecting to such TVs, projectors, DVD players, Blu-ray players, set
top boxes, and more.
Because HDMI transmits the highest quality digital signal, you can enjoy superior video and audio - as it was
originally created at the digital source.
HDMI IN
HDMI OUT
HDMI Cable
Digital Devices
(not supplied)
HDMI IN
HDMI OUT (TV)
HDMI Cable
(not supplied)
HDMI IN
Connect an HDMI cable (not supplied) from the
HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
ARC (HDMI OUT)
The ARC function allows digital audio to output via
the HDMI OUT (ARC) port.
and,
It can be enabled only when the Soundbar is
connected to a TV that supports the ARC function.
HDMI OUT (TV)
Connect an HDMI cable (not supplied) from the
HDMI OUT (TV) jack on the back of the product to
the HDMI IN jack on your TV.
● Anynet+ must be turned on.
● This function is not available if the HDMI
cable does not support ARC.
● HDMI is an interface that enables the
digital transmission of video and audio
data with just a single connector.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING OPTICAL (DIGITAL)
CABLE OR AUDIO (ANALOGUE) CABLE
This unit comes equipped with one optical in digital jack and one audio Analogue in jack, giving you two ways
to connect it to a TV.
OPTICAL
OPTICAL IN
OUT
Optical Cable
(not supplied)
BD/ DVD player/
Set-top box/
Game console
AUDIO
OUT
AUX IN
Audio Cable
OPTICAL IN
or,
Connect the OPTICAL IN on the main unit to the
OPTICAL OUT jack of the TV or Source Device.
AUX IN
Connect AUX IN (Audio) on the main unit to the
AUDIO OUT jack of the TV or Source Device.
● Do not connect the power cord of this
product or your TV to the wall outlet until
all connections between components are
complete.
Be sure to match connector colours.
● Before moving or installing this product,
be sure to turn off the power and
disconnect the power cord.
ASSEMBLING THE CABLE CLIP
Attach the cable clip to the unit
as shown, and then run the
DC 24V
DC 24V
cables through the clip to keep
them neat.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
FUNCTIONS
INPUT MODE
Press the (
) button on the main unit’s front panel or the
(SOURCE) button on the remote control to
select the mode you want.
The unit turns off automatically in the following
situations:
Input mode
Optical Digital input
AUX input
Display
D.IN
AUX
HDMI
BT
●
D.IN/HDMI/BT/TV/USB/ARC Mode
If there is no audio signal for 15 minutes.
AUX Mode
-
●
HDMI input
-
If there is no KEY input for 8 hours when the
AUX cable is connected.
BLUETOOTH mode
TV mode
-
If the AUX cable is disconnected for 15
minutes.
TV
USB mode
USB
● Use the provided USB cable if you cannot
connect a USB flash memory device
directly to the unit.
● To disable Auto Power down Off, press
the & button for over 5 seconds in AUX
mode.
ARC (HDMI OUT)
ARC (Audio Return Channel) transfers digital audio signal to the HDMI OUT (ARC) port.
HDMI Cable
1. Connect the TV supporting ARC to the Soundbar with an HDMI cable.
2. Turn on the TV, and turn on the Soundbar’s Anynet+.
3. Press the (
) button on the main unit’s front panel or the
(SOURCE) button on the remote control
to select the D.IN mode.
● If the HDMI cable does not support ARC feature, ARC may not work properly.
● To turn off the ARC function, turn Anynet+ off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all
without wires!
+ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
Bluetooth device
1. Press the (
) button on the main unit’s front
● If asked for PIN code when connecting a
panel or the
(SOURCE) button on the
Bluetooth device, enter <0000>.
remote control to select the BT mode.
● Only one Bluetooth device can be paired
at a time.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
● The Bluetooth connection will be
terminated when you turn the Soundbar
off.
3. Select the Stereo headset menu on the Bluetooth
device.
● The Soundbar may not perform Bluetooth
search or connection correctly under the
following circumstances:
•
You will see a list of scanned devices.
4. Select "[Samsung] Soundbar" from the list.
-
If there is a strong electrical field
around the Soundbar.
•
When the Soundbar is connected to the
Bluetooth device, it will display BT READY
-
If several Bluetooth devices are
simultaneously paired with the
Soundbar.
[Bluetooth Device Name]
display.
BT on the front
•
•
The device name can only be displayed in
-
-
If the Bluetooth device is turned off,
not in place, or malfunctions.
English. An underline " _ " will be displayed if
the name is not in English.
Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
If the Bluetooth device has failed to pair with
the Soundbar, delete the previous
"[Samsung] Soundbar" found by the
Bluetooth device and have it search for the
Soundbar again.
5. Play music on the connected device.
● The Soundbar supports SBC data
(44.1kHz, 48kHz).
•
You can listen to the music playing on the
connected Bluetooth device over the
Soundbar.
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
•
In BT mode, the Play/Pause/Next/Prev
functions are not available. However, these
functions are available in Bluetooth devices
supporting AVRCP.
● You cannot connect the Soundbar to a
Bluetooth device that supports only the
HF (Hands Free) function.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
+ To disconnect the Bluetooth device from the Soundbar
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user
manual.
●
●
The Soundbar will be disconnected.
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCONNECTED on the front display.
+ To disconnect the Soundbar from the Bluetooth device
Press the
(SOURCE) button on the remote control or the (
) button on the product's front panel to
switch from BT to another mode or turn off the Soundbar.
●
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar
before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 5 m.
● If the Bluetooth device comes back into the effective range after disconnecting, you can restart the
Soundbar to restore the pairing with the Bluetooth device.
● The Soundbar automatically turns off after 15 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other
using a short wireless connection.
●
A Bluetooth device may cause noise or malfunction, depending on usage, when:
-
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-
-
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
●
●
Pair the Soundbar with the Bluetooth device while they are close together.
The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
●
●
In poor reception areas, the Bluetooth connection may not work properly.
The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by
obstacles such as walls or doors.
●
This wireless device may cause electric interference during its operation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
NFC
You can connect your Soundbar to an NFC-enabled smart device through a Bluetooth connection with a
simple setup. Once connected, you can enjoy music stored in your smart device through the Soundbar. It is
supported in some area’s models only.
+ Connecting with NFC and smart devices
1. Detach the NFC sticker label from the package and attach it to a desired spot.
•
•
Putting the NFC sticker within a 3m radius from the unit is recommanded.
Do not attach the NFC sticker on a metallic surface including the Soundbar.
Metallic object may interfere with communication and the NFC sticker may not work properly.
2. Press the (
) button on the main unit’s front panel or the
(SOURCE) button on the remote control
to select the BT mode.
3. Enable the NFC function of your smart device.
4. Bring your smart device’s NFC antenna close to the NFC label.
5. When the connection prompt appears on your smart device’s display, select <Yes>.
Once the connection is established, the completion message appears.
•
※ To reconnect once the initial connection had been successful, start from step 3.
+ Disconnecting NFC
Bring your smart device’s NFC antenna close to the NFC label on the Soundbar again.
The disconnection message appears on the smart device's display.
+ To connect another smart device to the Soundbar which is already
connected to another NFC compatible device
After disconnecting from the previously connected device, bring the new smart device close to the NFC label
of the Soundbar.
● The NFC function is implemented in Android v4.1.2 Jelly Bean and later operating systems.
-
To make NFC connections, your smart device needs both Android OS 4.1.2 Jelly Bean or later and
the NFC tag for NFC function execution. You also need to download the "Samsung NFC
Connection" application from the Google Play store and install it on your smart device. For
further details, please refer to the smart device’s user manual.
● The location of the NFC antenna is different in different devices. Confirm the location of your smart
device’s antenna in the device's user manual before attempting to pair it with the Soundbar.
● If your smart device is in a thick housing or case, the NFC connection may not be stable.
● The N-mark is a trade mark or registered trade mark of the NFC Forum Inc. in the United States and
other countries.
● If you have trouble with an NFC connection
-
-
-
Actually touching your smart device to the NFC label can cause NFC connection failure.
If the "Empty tag" error is displayed on the smart device, please try again.
Check whether your smart device’s antenna is close enough to the NFC logo on the Soundbar.
● If you turn off the Soundbar when the Network Standby On feature is ON, and then try to connect
a Bluetooth device that has been previously connected using NFC, the Soundbar will turn on
automatically when the device connects. To set the Network Standby On feature, see page 23.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the Soundbar
Connect
1. Turn on the TV and Soundbar.
● The TV SoundConnect (SoundShare)
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
SoundConnect (SoundShare) function
before you begin.
•
Set the "Add New Device" menu of the TV to
"On".
2. Press the (
) button on the main unit’s front
panel or the
remote control to select the TV mode.
(SOURCE) button on the
(For further information, refer to the TV’s
user manual.)
3. On the TV, a message asking whether to enable
the TV SoundConnect function. "[Samsung]
Soundbar" is displayed on the TV screen.
● If your Samsung TV was released before
2014, check the SoundShare setting
menu.
4. Select <Yes> to finish connecting the TV and
Soundbar by TV remote control.
● If the distance between the TV and
Soundbar exceeds 5 m, the connection
may not be stable or the audio may
stutter. If this occurs, relocate the TV or
Soundbar so that they are within
● Switching the Soundbar’s mode from TV
to another mode automatically terminates
TV SoundConnect.
● To connect the Soundbar to another TV,
the existing connection must be
terminated.
operational range, and then re-establish
the TV SoundConnect connection.
● TV SoundConnect Operational Ranges:
● Terminate the connection to the existing
TV, and then press the ► button on the
remote control for 5 seconds to connect
to another TV.
-
Recommended pairing range:
within 50 cm
-
Recommended operational range:
within 5 m
● The Play/Pause, Next, Prev buttons are
not operable in TV SoundConnect mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
USB
You can play music files located on USB storage devices through the Soundbar.
USB port
Display
1. Connect the USB device to the USB port of the
●
●
Do not remove the USB device while it is
transferring files.
product.
DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
2. Press the (
) button on the main unit’s front
panel or the
(SOURCE) button on the
remote control to select the USB mode.
●
●
●
External HDDs are not supported.
Mobile phone devices are not supported.
File Format Type Compatibility list:
3. USB appears on the display screen.
•
The Soundbar connection to the USB device
is complete.
Format
Codec
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
Wave_Format_MSAudio1
Wave_Format_MSAudio2
AAC
•
The Soundbar automatically turns off (Auto
Power Off) if no USB device has been
connected for more than 15 minutes.
*.mp3
+ Before you connect a USB device
*.wma
*.aac
Be aware of the following:
●
If the file name of a folder on a USB device
exceeds 10 characters, it is not displayed on the
Soundbar's display.
AAC-LC
HE-AAC
●
●
This product may not be compatible with certain
types of USB storage media.
*.wav
*.ogg
*.flac
-
OGG 1.1.0
The Soundbar supports the FAT16 and FAT32 file
systems.
FLAC 1.1.0, FLAC 1.2.1
Supported Sampling Rate above 16KHz
-
The NTFS file system is not supported.
●
●
●
Connect USB devices directly to the USB port of
the product. Otherwise, you may encounter a
USB compatibility problem.
Do not connect multiple storage devices to the
product via a multi-card reader. It may not
operate properly.
Digital camera PTP protocols are not supported.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
USING THE NETWORK STANDBY ON FUNCTION
The Network Standby On function becomes available if wireless connection was properly established between
the smart device and Soundbar. This function turns on the Soundbar automatically when a smart device
attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If the Soundbar was turned on via Bluetooth
connection, its input mode is set to BT automatically. Turning on the Soundbar via Wi-Fi is available only by
using the App. For further information, refer to the Web manual.
1. Connect the Smart device to your Soundbar.
2. Turn the Network Standby On function on by pressing the $ button on the Soundbar remote for more
than 5 seconds. You can turn the function off by pressing the $ button again for more than 5 seconds.
● Available only if the Soundbar is listed among the Smart device’s paired devices. (The Smart device
and the Soundbar must have been previously paired at least once.)
● Soundbar will appear in the Smart device’s searched devices list only when the Soundbar is
displaying [BT READY] or [WiFi READY].
● In the TV SoundConnect mode, the Soundbar cannot be paired to another Smart device.
● If Network Standby On function did not work
-
The Network Standby On is set to Off.
● Wi-Fi connection to the Soundbar will be terminated if its power cord was disconnected or the
power was cut off. Turn on the Soundbar and reconnect.
USING THE AUTO POWER LINK FUNCTION
If Soundbar was connected to an external device with optical cable, AUTO POWER LINK function can be used.
If you connect the main unit to a TV with a digital optical cable, set the Auto Power function ON to have the
Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and an External Device
AUTO POWER LINK
ON
Display
with an Optical cable.
ANYNET+ OFF /
POWER LINK ON
2. Press and hold the DIMMER/Anynet+ button for
over 5 seconds to toggle the function.
ANYNET+ ON /
POWER LINK OFF
OFF
23
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
USING THE MULTIROOM LINK
Once the Soundbar is connected to a smart device with Multiroom Link App, you can connect multiple
Samsung Multiroom devices together wirelessly.
+ Before you begin
Communication Basics
Smart Device:
Android or iOS
(App Control)
Intrenet
Wireless Router
1. Requirements: Wireless Router, Smart Device
2. The wireless router should be connected to the Internet.
3. The smart device should be connected to the router via a Wi-Fi connection.
+ Installing the Samsung Multiroom App
To use the Soundbar, you must download and then install the Samsung Multiroom App by accessing the app
through Google play or the App Store. With the Samsung Multiroom App installed, you can play music stored
in your smart device, from connected devices and other content providers, and from Internet radio stations.
Android or iOS
Accessing the Samsung Multiroom App
Download the Samsung Multiroom app from
Google Play or the App Store of your smart device.
To access the Samsung Multiroom app, press the
Multiroom app icon on your smart device.
*
Market search : Samsung Multiroom
š
“™
or
ANDROID APP ON
24
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
+ Connecting with Soundbar
Connect the Soundbar to a wired/wireless router. Wired or wireless connection
(using Wi-Fi SETUP or WPS, you can see the guide on Multiroom APP) to the router can be established.
Connecting the Soundbar to Your Network with a LAN Cable
Plug In
LAN
Wireless Router
1. Connect your smart device to your Wi-Fi network.
2. On your Smart device, select the Samsung Multiroom app. Setup starts.
3. In the app, select "I don’t have a Hub", and then press Next. On the next screen, select Soundbar from the
device type, and then press Next.
4. Select Wired from the network type, and then press Next.
5. Connect one end of the LAN cable to the Soundbar’s LAN port. Connect the other end to your wireless
router. (You cannot use the Soundbar without a wireless router.)
6. Plug the Soundbar into an electrical outlet.
● For further information on connecting the Soundbar with a wired/wireless router, refer to the
manual on the Web.
● For further information on connecting the product for Multiroom Link, please refer to the
web-based user manual or manual provided within the app.
-
HW-H751 PDF file download.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
SOFTWARE UPDATE
● Updating firmware may not work properly
if audio files supported by the Soundbar
are stored in the USB storage device.
● Do not disconnect the power or remove
the USB device while updates are being
applied. The main unit will turn off
automatically after completing the
firmware update.
● After reset, all settings are reset to their
factory default settings. We recommend
you write down your settings so that you
can easily reset them after the update.
Note that updating firmware resets
subwoofer connection too. If connection
to the subwoofer is not established
automatically after resetting,
+ Updating with USB
Samsung may offer updates for the Soundbar's
system firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your
Soundbar.
refer to page 13.
If the firmware fails to update, we
recommend formatting the USB device in
FAT16 and trying again.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
● Do not format the USB device in the NTFS
format. The Soundbar does not support
the NTFS file system.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading updates files.
● Depending on the manufacturer, some
USB devices may not be supported.
1. While the Soundbar is turned off, connect the
USB storage device that contains the updating
firmware to the Soundbar’s USB port.
+ Auto update
2. Turn on the Soundbar UPDATE appears on the
Even when the Soundbar is turned off, the
Soundbar will automatically check latest software
version and continue to update if it was connected
to the Internet.
display and updating begins within 3 minutes.
•
Upon completion of updating, the Soundbar
turns off and on automatically.
•
Once the software update is completed, turn
on the product and then press and hold the
● The Soundbar is configured to run auto
update by default.
(
) button on the remote control for
more than 5 seconds. “INIT” appears on the
display and the unit is powered off. The
updgrade is complete.
● To use auto update function, the
Soundbar must be connected to the
Internet.
● Wi-Fi connection to the Soundbar will be
terminated if its power cord was
disconnected or the power was cut off.
Turn on the Soundbar and reconnect.
If UPDATE was not displayed
1. Turn off the Soundbar, connect the USB storage
device that contains update files to the
Soundbar’s USB port.
2. Disconnect the power cord, reconnect it and turn
it on.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
Disconnect the power plug and connect it again.
Sound is not produced.
• Is the Mute function on?
Press the Mute button to cancel the function.
• Is the volume set to minimum?
Adjust the Volume.
The remote control does not work.
• Are the batteries drained?
Replace with new batteries.
• Is the distance between the remote control and
main unit too far?
Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
• Reset the TV MODE and connect again.
TV SoundConnect is supported by some
Samsung TVs released from 2012 on. Check your
TV to see if it supports TV SoundConnect.
Update your TV with the latest firmware.
Contact the Samsung call centre.
Press and hold the ► button for 5 seconds to
reset the TV SoundConnect connection.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main body of the product.
Try to connect your subwoofer again.
(See Page 13)
Try to connect your subwoofer again.
• Try to adjust the vibration of your subwoofer.
Press the WOOFER button on your remote
control to adjust its value (between SW-6 and
SW+6).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
APPENDIX
SPECIFICATIONS
Model name
HW-H750, HW-H751
USB
5V/0.5A
3.3 kg
Main Unit
Weight
Subwoofer
(PS-WH750, PS-WH751)
9.8 kg
GENERAL
Main Unit
943 x 123 x 57 mm
305.5 x 388.5 x 305.5 mm
+5 °C to +35 °C
Dimensions
(W x H x D)
Subwoofer
(PS-WH750, PS-WH751)
Operating Temperature Range
Operating Humidity Range
Main Front
10 % to 75 %
40W/CH, 6 OHM, THD = 1%, 1kHz
40W/CH, 6 OHM, THD = 1%, 1kHz
Rated Output
Power
Main Bottom
Subwoofer
(PS-WH750, PS-WH751)
160W, 3 OHM, THD = 10%, 100Hz
AMPLIFIER
S/N Ratio (Analogue Input)
Separation (1kHz)
65 dB
65 dB
*
*
S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio
Engineering Society) guidelines.
Nominal specification
-
-
-
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
For the power supply and Power Consumption, refer to the label attached to the product.
※ Open Source License Notice
For further information on Open Sources used in this product, please visit the website:
Hereby, Samsung Electronics, declares that this Wireless Audio - Soundbar is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care Centre.
Country
Contact Centre
0800 - SAMSUNG (0800 -
7267864)
Web Site
Country
MONTENEGRO 020 405 888
Contact Centre
Web Site
AUSTRIA
080 697 267
090 726 786
0900-SAMSUNG (0900-7267864)
(€ 0,10/Min)
815 56480
0 801-172-678* lub +48 22
607-93-33 **
* (całkowity koszt połączenia jak za
1 impuls według taryfy operatora
** (koszt połączenia według taryfy
operatora)
SLOVENIA
(Dutch)
support (French)
BELGIUM
02-201-24-18
NETHERLANDS
NORWAY
BOSNIA
051 331 999
07001 33 11 , sharing cost
062 726 786
800 - SAMSUNG (800-726786)
70 70 19 70
030-6227 515
01 48 63 00 00
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt.
Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
8009 4000 only from landline, toll
free
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
POLAND
PORTUGAL
ROMANIA
808 20 7267
08008 SAMSUNG (08008 726
7864) TOLL FREE No.
011 321 6899
SERBIA
SLOVAKIA
SPAIN
GERMANY
0034902172678
0771 726 7864 (SAMSUNG)
(German)
support (French)
SWEDEN
CYPRUS
GREECE
SWITZERLAND 0848 726 78 64 (0848-SAMSUNG)
U.K
EIRE
LITHUANIA
LATVIA
ESTONIA
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
support
HUNGARY
ITALIA
LUXEMBURG 261 03 710
[Correct disposal of batteries in this product]
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66.
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
If batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally
safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial
wastes for disposal.
AH68-02725C-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|