Samsung Security Camera SPD 2700 User Guide

37X/33X/27X Ultra-Low Light SPEED DOME CAMERA  
SPD-3700T/3700/3310/2700 User’s Manual  
Before installing and operating the camera, please read this user’s manual carefully.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The lightning flash with an arrowhead symbol, within an equilateral triangle is  
intended to alert the user to the presence of uninsulated “dangerous voltage”  
within the product's enclosure that may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert the user  
to the presence of important operating and maintenance (servicing) instructions  
in the literature accompanying the appliance.  
INFORMATION-This equipment has been tested and found to comply with  
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instruction manual, may  
cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference  
at his own expense.  
WARNING  
- CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE  
MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE  
THE EQUIPMENT.  
- TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE  
THIS PRODUCT TO RAIN OR MOISTURE.  
CAUTION : To prevent electric shock and risk of fire hazards:  
- The installation for this apparatus should be by a qualified service person  
and should conform to all local codes.  
- Do NOT use power sources other than Class 2 power source.  
- Carefully push the unlock buttons to prevent injury due to falling of this  
apparatus.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Sequence Setting ………………………………………………………48  
Features ………………………………………………………………………… 6  
Cautions for Using Auto Track (SPD-3700T) ………………………… 7  
Warnings & Cautions ……………………………………………………… 9  
Components and Accessories …………………………………………… 12  
Component Names and Functions……………………………………… 13  
Installing Your Camera……………………………………………………… 15  
Power On Resume & MD Dwell Time ………………………………………… 48  
Preset ………………………………………………………………………………… 49  
Swing SEQ …………………………………………………………………………… 53  
Group SEQ …………………………………………………………………………… 54  
Tour SEQ ……………………………………………………………………………… 55  
PTZ Trace …………………………………………………………………………… 56  
Auto Run……………………………………………………………………………… 57  
Speed Dome Camara and Appliances Wiring Diagram ……… 15  
Communication DIP Switch Settings (SW2)……………………… 17  
P/T Setting ………………………………………………………………… 58  
Pan/Tilt Limit ………………………………………………………………………… 58  
Area Setting ………………………………………………………………………… 59  
Area Masking ……………………………………………………………………… 60  
Prop. P/T ……………………………………………………………………………… 61  
Digital Flip …………………………………………………………………………… 62  
Image Hold…………………………………………………………………………… 63  
Auto Track1 ………………………………………………………………………… 64  
Auto Track2 ………………………………………………………………………… 66  
Protocol Settings …………………………………………………………………… 17  
Baud Rate Settings………………………………………………………………… 18  
Communication Method Settings ……………………………………………… 18  
Communication Response Settings …………………………………………… 18  
Termination Settings ……………………………………………………………… 18  
Camera Backup Settings ………………………………………………………… 19  
Camera ID DIP Switch Settings (SW1) …………………………… 19  
Camera ID Chart …………………………………………………………………… 20  
On-Ceiling Mount Type Installation Example …………………… 29  
OSD Setting …………………………………………………………………… 68  
Alarm Setting ………………………………………………………………… 69  
Initialization Setting………………………………………………………73  
Status Check…………………………………………………………………… 75  
Product Specifications……………………………………………………… 76  
Interface Symbols …………………………………………………………… 32  
Operating Your Camera …………………………………………………… 33  
Functional Description……………………………………………………… 37  
Camera Setting …………………………………………………………… 37  
Focus and Zoom …………………………………………………………………… 37  
White Balance ……………………………………………………………………… 39  
Exposure……………………………………………………………………………… 40  
Backlight……………………………………………………………………………… 41  
AGC …………………………………………………………………………………… 44  
SSNR(Samsung Super Noise Reduction) …………………………………… 45  
Day & Night ………………………………………………………………………… 46  
Others ………………………………………………………………………………… 47  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cautions for Using Auto Track (SPD-3700T)  
Features  
The following cautions are for the Auto Track function built-in with the SPD-3700T;The SPD-  
3700/3310/2700 do not have Auto Track.  
A/F 37x/33x/27x Optical Zoom  
Smart P/T  
To use Auto Track to its full potential, please read and be aware of the following cautions.  
Neglecting the cautions may cause unsatisfactory performance of the tracking function as  
well as camera malfunctions.  
The built-in 37x(SPD-3700T/37-0)/33x(SPD-3310)/27x  
(SPD-2700) optical zoom lens with auto-focus is combined  
with a 12x digital zoom, providing a maximum of 444x/  
396x/324x zoom.  
The Smart P/T function automatically adjusts the  
control speed of the Pan and Tilt functions according to  
the current zoom power. It is useful to adjust the  
functions manually for detailed controls when  
monitoring a high-powered zoom.  
• Auto Track is specifically to track down unknown intruders. It is not be suitable to monitor  
a crowd.  
• If the camera is not safely secured, tracking errors may occur.  
• If the camera lens is smeared with foreign substances, snow flakes, or raindrops, the  
camera may incur unsatisfactory performance in the tracking function. For optimal  
performance, please install the camera in an environment safe from contamination, and  
clean the camera lens on regular basis.  
• If the tracking function shows poor performance at nighttime or under low light  
circumstances, use the Sens-Up function.  
Versatile Protocol Processing  
Day & Night  
This camera supports a total of 8 types of communication  
protocols: Samsung Techwin, Pelco-D, Pelco-P, Samsung  
Electronics, Panasonic, Honeywell, AD and Vicon.  
With its daytime & nighttime switch and Sens-Up  
functions based on the ICR (Infrared Cut filter Removal)  
method, the camera provides high quality pictures  
regardless of whether it is day or night.  
* Sens-Up increases the CCD sensitivity by electrically  
extending the camera’s exposure time.  
Wide Range Auto Security  
Functions  
- Auto Tracking(SPD-3700T Only) : A moving object or a  
person can be tracked and recorded automatically by  
the camera with its Pan, Tilt, and Zoom functions.  
- Multiple Preset Function Saving : Up to 13 camera  
image properities can be saved individually to provide  
high quality pictures.  
- Image Holding : When moving between presets in Group  
and Tour functions, using this Preset Freeze function  
holds the image status and helps the screen observer  
relieve visual fatigue.  
- PIZ Trace : Patterns operated with the joystick can be  
saved and replayed by users.  
- Swing : Using the Swing function commands the  
camera to move between 2 selected locations,  
monitoring the route.  
* Day & Night enables you to select between color and  
B/W modes depending on the lighting conditions.  
• Auto Track may have errors at times when pronounced shadows are created: e.g. sunrise  
and sunset.  
OSD (On Screen Display)  
• The camera may catch and follow unintended movements – car traffic or swaying tree  
branches – during the Auto Track operation.To prevent and correct such errors, adjust the  
installation direction and angle of the camera, or use Zone Settings (Mask) (page 67).  
• Adjust the installation direction and angle of the camera, or use Zone Settings also under  
the following conditions:With excessively bright light sources, under flickering lights, or if  
the camera displays internal reflections.  
• When using Auto Track, it is recommended to adjust the tracking object size to 1/4 of the  
screen.  
• This feature may not perform as expected depending on the situation and circumstances.  
Samsung Techwin is not responsible for injuries and financial damage caused by the  
situation described above.  
The camera IDs, camera preset numbers, preset names,  
area names, and camera operation status are displayed  
on the monitor, allowing set up of various camera  
functions through the OSD menu screen.  
Preset Position Saving and Loading  
Up to 255 preset positions can be set. Using this  
function saves and brings up the camera feed of a  
selected monitoring location.  
- Group Search : Maximum 255 Preset positions are  
toured in order.  
- Tour Search : Maximum 6 Group Search functions are  
toured in order.  
Camera Backup  
Digital Flip  
This is to back up the camera’s sequence information  
and presets. This is useful when the camera or its  
install base are damaged or malfunctions occur.  
The Digital Flip function is useful to monitor moving  
objects or people passing directly under the camera.  
When an object or a person passes directly under the  
camera, its tilt monitor follows the object or person over  
100 degrees to the other side of the tilt area without  
panning. The screen inversion starting to occur at 100  
degrees or higher is digitally adjusted.  
Area Masking  
If a monitoring location includes a highly private area,  
the area can be selectively masked on the screen.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Techwin cares for the environment at all product manufacturing  
stages to preserve the environment, and is taking a number of steps to provide  
customers with more environment-friendly products. The Eco mark represents  
Samsung Techwin's will to create environment-friendly products, and indicates  
that the product satisfies the EU RoHS Directive.  
Warnings & Cautions  
Warnings  
Stop using the camera if smoke or  
abnormal heat is detected.  
Do not install on your own.  
Warnings & Cautions  
This information is provided to ensure your safety and to prevent any losses, financial or  
otherwise. Please read it carefully and use the product accordingly.  
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as  
an aerial ladder while providing after-sales service shall be at your expense.  
* Unplug the power plug when thunder crashes or lightning flashes to prevent fire and damage to the product.  
This installation should be made by a qualified service  
person. Installing this product on your own may result in  
fire or electric shock. For the installation service, contact  
the retail shop where you bought the product.  
May cause fire.  
* This product is support equipment for a security system. Therefore, we can't compensate for material losses and/or  
personal injuries by robbery, fire, natural disaster, or anything of the sort.  
Warning/Caution/Special Mark Messages  
Do not install in high humidity or in a  
place that may be exposed to oil or gas.  
Do not install on an unsubstantial wall  
that may be subject to vibrations.  
Ignoring this information may  
Ignoring this information may  
result in material loss and/or  
result in material loss and/or slight  
serious personal injuries, including  
injuries.  
death.  
Indicates “Prohibited”.  
Indicates “No Disassembly”.  
May cause product malfunctions, electric shocks, and fire.  
May cause the product to fall.  
Do not handle the power plug  
with wet hands.  
Do not disassemble the camera or  
insert foreign subjects.  
May cause electric shock.  
May cause fire and damage to the product.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings & Cautions  
Warnings & Cautions  
Detailed Warnings and Cautions  
Cautions  
- Avoid operating the camera for long durations under high temperatures and in high  
humidity. Excessive heat can shorten the lifespan of the camera components.  
Do not install under extreme  
temperature conditions.  
Do not install under unstable  
lighting conditions.  
- Do not install or place the camera near any heat sources.  
- Subjecting the dome cover to physical shock may damage the camera and cause water  
leakage into it.  
- Do not place the camera facing direct sunlight or other intense light sources. Strong lights  
such as spotlights can cause distortions—blooming and smear—as well as discolorations  
on the screen by heating up the color filter of the camera.They also may cause internal  
reflections of the camera, leading to operational malfunctions.  
- Do not drop the camera or subject it to physical shock or vibration; this can cause serious  
damage to the camera.  
- When installing the camera near a power line, make sure to keep at least 1 meter distance  
from the power line, or earth an additional metal pipe to separate the camera from the  
power source.  
Use only under temperature conditions between -0ºC  
and +50ºC to prevent low graphics quality and product  
malfunctions. When using in high temperature conditions,  
provide good ventilation.  
Severe lighting changes or flickering may hinder normal  
camera operation.  
Do not drop the camera or subject  
it to physical shock.  
Never keep the camera face to direct  
sunlight or any other strong lights.  
- This camera is to install on the ceiling. Installing it on the ground or a unleveled location  
may cause product malfunctions and shorten its lifespan.  
- This camera is provided with separate indoor and outdoor housings.When installing it in  
an outdoor environment, use the outdoor housing.  
- Avoid installing and operating the camera in the following places.  
∙ Places whose temperature exceed the camera’s recommended range. (Indoor: -10~  
50, Outdoor: Refer to the housing manual)  
∙ Places where drastic temperature changes occur: e.g. Near an air conditioner.  
May cause product malfunctions.  
May cause critical damage to the CCD.  
∙ Places that are exposed to steam, oil, and inflammable substances: e.g. Inside a kitchen.  
∙ Places that are exposed to radioactivity, X-rays, strong electric waves, and electro-  
magnetic waves.  
Do not install in a place that may be  
exposed to rain, water, or radioactivity.  
Avoid touching the camera lens.  
∙ Places that are exposed to outdoor air contaminants: e.g. Dust and car exhaust.  
∙ Places in high humidity.  
∙ Places that are exposed to corrosive gas: e.g. Next to the sea.  
- Smeared and dusty dome covers decrease the picture and video quality. Clean the dome  
cover and camera lens on a regular basis.  
- Remove the plastic wrap on the dome cover only after the camera installation is complete.  
- This camera is not equipped with a power switch. Plug in the camera only after the  
installation is complete.  
The lens is the most important component of the camera.  
Be careful not to smear it with fingerprints.  
Water leakage into the camera may cause damage.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
11  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Component Names and Functions  
Components and Accessories  
* Components  
Front  
Side  
Power Adapter (AC 24V, Peak 2.5A)  
User’s Manual  
* Accessories  
1
The following items are sold separately from the camera.  
Housings  
STH-380PO  
Ultra Low-  
Temperature  
Heavy  
STH-370PO  
Low-  
Temperature  
Heavyweight  
(-20~50)  
STH-370PI  
Indoor Housing  
(-10~50)  
(-40~50)  
STH-370PEV  
Flush-Mount  
Indoor Housing  
(-10~50)  
STH-360PO  
Low-  
Temperature  
Lightweight  
(-20~50)  
Bottom  
1
2
3
4
Unlock Button  
SW2: Communication DIP Switch  
SW1: ID DIP Switch  
2
Safety Wire Holder  
Brackets  
STB-350PPM  
Parapet Mount  
STB-340PCM  
Corner Mount  
STB-330PPM  
Pole Mount  
3
4
STB-25PF  
Indoor Flange  
STB-30PF  
Indoor Flange  
STB-370PC  
Surface-mount  
Install Base  
STB-496PPV  
Ceiling Bracket  
STB-270PWV  
Wall Bracket  
STB-270B  
Setup Box  
Notes  
•ꢀForꢀtheꢀDIPꢀswitchꢀsettings,ꢀpleaseꢀreferꢀtoꢀtheꢀ“InstallingꢀYourꢀCamera”ꢀonꢀPageꢀ17.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
13  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Component Names and Functions  
Speed Dome Camara and Appliances Wiring Diagram  
Camera Wiring Interface Board (Sold Separately)  
For the camera wiring, please refer to the picture below.  
Connecting with Samsung Techwin’s “Stand Alone DVR”  
The camera’s wiring interface board is equipped to a housing that is sold separately.  
Video Output  
· RS-485 :  
Camera  
D+  
Stand Alone DVR  
T(TX)+  
Alarm  
D-  
T(TX)-  
ꢀSVR-1680/1660/1645/960/  
Alarm Output  
·RS-422 :  
Fan Heater  
Connector  
Camera  
D+  
Stand Alone DVR  
T(TX)+  
D-  
T(TX)-  
Alarm Input  
ꢀSVR-945  
TXD+  
TXD-  
R(RX)+  
R(TX)-  
Power Supply  
Communications and AUX  
ꢀSVR-940/450  
ꢀSVR-1650/1640A/950E  
Connecting with the Samsung Techwin Controller SCC-3100A  
AC24V 2.5A  
Power Input  
Ground  
·RS-485 :  
SCC-3100A  
Refer to the below Control  
Signal Connection chart  
Data Box PORT1  
RX+  
RX-  
AUX Output  
Camera  
TX+  
TX-  
D+  
D-  
Control Signal Connection  
Notes  
· RS485 Communications  
Controller  
Camera  
or DVR  
•ꢀTheꢀmaximumꢀpowerꢀcapacityꢀofꢀtheꢀbuilt-inꢀ  
relay is 30VDC/2A, 125VAC/0.5A, and  
250VAC/0.25A.  
•ꢀConnectingthepowerconnectorandGNDꢀ  
incorrectly to the NC/NO and COM ports may  
cause a short circuit and fire, damaging the  
camera.  
SCC-3100A  
Data Box PORT1  
·RS-422 :  
D+  
D-  
TXD+  
TXD-  
Camera  
TX+  
TX-  
· RS422 Communications  
Camera  
RX+  
RX-  
Controller  
or DVR  
TXD+  
D+  
D-  
TXD-  
TX+  
TX-  
D+  
D-  
TXD+  
TXD-  
RXD+  
RXD-  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
15  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
Note!  
Communication Protocol DIP Switch Settings (SW2)  
* The following DVR models support all functions of the camera.  
- 16Ch : SVR-1680/1660/1645/1650E/1640A  
- 9Ch : SVR-960/945/950E  
- 4Ch : SVR-440  
* The following DVR models support only the Pan,Tilt, Zoom, and Focus functions of  
the camera.  
- 9Ch : SVR-940  
- 4Ch : SVR-450  
SW2 Pin No. Purpose  
1~4  
5~6  
7
8
9
Protocol Settings  
Baud Rate Settings  
Transfer Method (RS-485/422) Settings  
Response Mode Settings  
Backup Mode Settings 1  
Termination Settings  
* Memo  
10~11  
12  
MEMO  
Backup Mode Settings 2  
•  
Protocol Settings  
Select a communication protocol for the camera  
No  
1
2
3
4
5
6
7
8
Protocol  
Samsung  
Pelco-D  
SW2-#1  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW2-#2  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
SW2-#3  
OFF  
OFF  
ON  
SW2-#4  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
Pelco-P  
Samsung Elec.  
Panasonic  
Vicon  
Honeywell  
AD  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
ON  
OFF  
OFF  
ON  
ON  
9
OFF  
OFF  
ON  
10  
11  
12  
13  
14  
15  
16  
ON  
OFF  
OFF  
ON  
ON  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
17  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
•  
Baud Rate Settings  
•  
Camera Backup Settings  
Select the transfer speed of a selected communication protocol.  
These settings are useful when the camera or its install base are damaged or malfunctions  
occur.When replacing the camera or its install base, you can transfer existing presets and  
sequence information to the replacement using these settings.  
No.  
1
Baud Rate(BPS)  
2,400  
SW2-#5  
ON  
SW2-#6  
ON  
OFF  
OFF  
ON  
2
4,800  
ON  
Backup Function  
SW2- #9  
SW2- #12  
OFF  
3
9,600  
OFF  
Backup(IB D)  
OFF  
ON  
-
4
19,200  
OFF  
Backup(D IB)  
OFF  
Backup Disable  
ON  
- Backup(IBD) : Enables transferring the current camera's sequence information to a new  
camera.  
•  
Communication Method Settings  
- Backup(DIB) : Enables transferring the current camera's sequence information to a new  
install base.  
Select a communication method for the camera.  
Function  
Transfer Mode Switch  
ON  
OFF  
RS-485(2Wire)  
*IB: Install base, D: Dome Camera  
SW2- #7  
RS-422(4Wire)  
Notes  
•ꢀToꢀuseꢀaꢀthirdꢀpartyꢀcontrollerꢀwithꢀthisꢀproduct,ꢀpleaseꢀcontactꢀourꢀAfter-SalesꢀServiceꢀorꢀ  
Technology Department.  
•  
Communication Response Settings  
•ꢀADꢀProtocolꢀControlꢀMethod  
- Input Camera OSD: 3+Auxiliary On  
- Output Camera OSD: 3+Auxiliary Off  
- Enter: IRIS Open  
- ESC: IRIS Close  
Select a communication response method for the camera and controller: Response or No  
Response.  
Function  
ON  
OFF  
SW2- #8  
Response Mode Switch  
Response  
No Response  
•ꢀForꢀmoreꢀinformationꢀaboutꢀtheꢀprotocols,ꢀreferꢀtoꢀourꢀofficialꢀwebsite.  
Camera ID DIP Switch Settings (SW1)  
•  
Termination Settings  
To set up camera IDs, refer to the “Camera ID Chart” next.  
To prevent the attenuation of communication signals between the camera and controller, 2  
cameras in a longest distance for the camera and controller communication loop must be  
set up with the termination settings.  
Camera Input Position  
Termination of Longest Path  
On the Path  
SW2- #10  
ON  
SW2- #11  
ON  
OFF  
OFF  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
19  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
ID  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
SW1-#1  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SW1-#2  
ON  
ON  
OFF  
OFF  
ON  
SW1-#3  
OFF  
OFF  
ON  
ON  
ON  
SW1-#4  
ON  
ON  
ON  
ON  
SW1-#5  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#6  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#7  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#8  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
•  
Camera ID Chart  
ID  
1
SW1-#1  
ON/OFF  
OFF  
ON  
OFF  
ON  
SW1-#2  
OFF  
ON  
SW1-#3  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
SW1-#4  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
SW1-#5  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
SW1-#6  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
SW1-#7  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
SW1-#8  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
2
3
4
5
6
7
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
ON  
ON  
8
9
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
10  
11  
12  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
82  
83  
84  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
ON  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
21  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
ID  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
SW1-#1  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SW1-#2  
OFF  
ON  
SW1-#3  
ON  
ON  
SW1-#4  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
SW1-#5  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#6  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#7  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#8  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ID  
SW1-#1  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SW1-#2  
OFF  
OFF  
ON  
SW1-#3  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
SW1-#4  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
SW1-#5  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
SW1-#6  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
SW1-#7  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
SW1-#8  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
23  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
ID  
171  
SW1-#1  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SW1-#2  
ON  
OFF  
OFF  
ON  
SW1-#3  
OFF  
ON  
ON  
ON  
SW1-#4  
ON  
ON  
ON  
ON  
SW1-#5  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#6  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#7  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#8  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ID  
SW1-#1  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
SW1-#2  
ON  
ON  
OFF  
OFF  
ON  
SW1-#3  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
SW1-#4  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#5  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#6  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#7  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
SW1-#8  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
214  
215  
216  
217  
172  
173  
174  
175  
176  
177  
178  
179  
180  
181  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
ON  
ON  
ON  
218  
219  
220  
221  
222  
223  
224  
225  
226  
227  
228  
229  
230  
231  
232  
233  
234  
235  
236  
237  
238  
239  
240  
241  
242  
243  
244  
245  
246  
247  
248  
249  
250  
251  
252  
253  
254  
255  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
OFF  
ON  
212  
213  
ON  
ON  
ON  
ON  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
25  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
Preparing and Installing Camera Bracket  
Preparing Adapter and Cables  
– Power Adapter  
Power adapter has the capacity of AC24V 2.5A.  
For the installation guidelines for the brackets and housings, refer to the user’s manual  
enclosed with the bracket or housing that is sold separately.  
Camera Wiring Diagram 1  
– Video Cable  
A BNC coaxial cable shown in the picture is required to connect Speed Dome’s video  
output terminal to the monitor.  
Distance  
500m or shorter  
500m or longer  
Recommended Cable Specification  
5C2V Coaxial Cable  
7C2V Coaxial Cable  
– Communications Cable  
For the camera to communicate with the controller, a RS-485/422 communications line is  
required.To ensure the quality of long distance communications and the accuracy of the  
overall communications, using a twisted pair cable such as UTP Cable is recommended.  
* Caution!  
Depending on the camera’s environment, the communications distance may vary.  
Notes  
•ꢀNeitherꢀtheꢀvideoꢀnorꢀcommunicationsꢀcableꢀisꢀenclosedꢀwithꢀtheꢀcamera.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
27  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
Camera Wiring Diagram 2  
On-Ceiling Mount Type Installation Example  
1.Attaching Template and Installing STB-370PC  
Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the  
diameter marked on the template. Drop the camera cables down from the ceiling through  
the hole. Next, install the exposed bracket STB-370PC to the ceiling as shown in the  
picture.Before installing the exposed bracket, open the hinged door at the bottom of the  
bracket as shown in the picture. Hold the knob on the hinged door to open.  
Template  
Knob  
2.Wiring Terminal Cables  
Connect the cables to the terminal block on the  
hinged door. For the location of the wiring pins,  
please refer to the “Camera Wiring Diagram”  
on Page 14. Once the wiring is successful, close  
the hinged door.  
Notes  
•ꢀDoꢀnotꢀconnectꢀtheꢀcameraꢀtoꢀaꢀpowerꢀoutletꢀuntilꢀtheꢀinstallationꢀisꢀcomplete.ꢀSupplyingꢀ  
power in the middle of the installation may cause fire or damage the product.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
29  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing Your Camera  
Installing Your Camera  
3. Setting Up Camera DIP Switches  
To attach or detach the camera, refer to the picture.  
DIP switches for communication and ID protocols are located on the bottom of the  
camera. For the switch settings, refer to the dip switch settings of this manual.  
* Attaching the camera: Hold up the camera and push it to the mount as shown in the  
picture. Push the camera until you hear a “click”.  
* Detaching the camera:To detach the camera, pull the camera downward while pushing  
the unlock buttons on the camera upward.  
ID(SW1)  
Protocol(SW2)  
Unlock Button  
UNLOCK  
5. Connecting Camera Safety Cable and Attaching Camera  
Carefully attach the camera to the mount following the alignment guide marks as shown  
in the picture. First hook the camera's safety cable on the mount, and then attach the  
camera.  
To attach the  
camera  
To detach the  
camera  
Alignment  
Direction  
Guides  
Safety  
Cable  
Alignment  
Direction  
Guides  
Alignment  
Directions  
To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.  
Notes  
•ꢀMakesuretofirsthookthecamera'ssafetycabletothemountbeforeproceeding.ꢀ  
Otherwise you may be exposed to serious injury caused by a fallen camera.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
31  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Your Camera  
Interface Symbols  
• Motion Detection Standby/Operation Display :  
• OSD Menu Screen :  
- When in standby mode, the " " in the upper right of the screen blinks and then  
changes to " " if motion is detected.  
• Alarm Input Port Status Display :  
- "","","" and "" in the upper right of the screen blink.  
• Current Alarm Port Display According to Input Alarm Ports(Priority) :  
- Only one of " "," "," "," " in the upper right of the screen blinks.  
• Preset Number Display Settings :  
Camera Setting  
Focus & Zoom  
Sub Menu Available  
Sub Menu Not Available  
ꢂ White Balance  
ATW  
---  
---  
- '*' : If a preset number is already available  
- 'H' : If a preset location is the camera’s home position  
Operating Your Camera  
- 'T' : If a preset location is the camera’s Auto Track starting point (SPD-3700T Only)  
• If an OSD Menu has Sub Menus :  
- The color of the circle around the menu number shows as embossed, e.g. "".  
• If an OSD Menu Does Not Have Sub Menus :  
- The circle around the menu number shows as engraved, e.g. "".  
• Panning and Tilting  
- Use the joystick of the controller or its direction buttons.  
• Controlling Zoon  
- Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the Zoom  
button.  
• Accessing Screen Menus  
- Press the Menu or OSD button on the controller.  
Motion Detect  
For more detailed information about controls using a third party controller or a DVR, refer to the  
user’s manual of the product.  
• PTZ Function Screen :  
Alarm Input  
OSD Commands, Function Chart, and Menu Controls  
ID=001  
ꢁ①②③④  
This dome camera can be operated using two methods: Using hot keys on its dedicated  
controller, or accessing the OSD (On Screen Display) on the video output.The OSD menu  
commands are as follows:  
Area Display  
Area1 Area Name  
Command  
Function  
Move the joystick up/down/left/right  
Enter/Focus Far  
ESC/Focus Near  
Moves the OSD menus up/down/left/right, respectively.  
Selects a menu and allows access to the sub menus.  
Cancels a command and moves back to an upper-level menu.  
Sequence Status  
Preset Info  
G-SEQ1  
PRESET=001 Preset Name  
P:300 T:040 10X  
Dome Cover Setting  
Before optimizing the camera focus settings for the dome cover shape, please select the  
dome cover type on the camera’s main menu. (Refer to Page 48)  
• Preset Number Setting Screen :  
Dome Cover Setting  
Installation Type  
Preset Edit  
Preset=011* (1~255)  
Outer  
Inner  
None  
Dome cover type for outdoor housings except the indoor flush model.  
Default dome cover type including the indoor flush model.  
When using the camera without a dome cover.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
33  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Your Camera  
Operating Your Camera  
*OSD Menu Chart  
③Group SEQ. Group1~6  
Tour SEQ. ①Setting②Execute③Clear  
⑤PTZ Trace Trace1~4  
①Setting②Execute③Clear  
P1  
P2  
P3  
P4  
P5  
Default  
One Shot AF  
Auto  
①Focus Mode  
Auto/Manual/One Shot AF  
①Replay②Memorize  
Off/Home/Preset/Swing/Group/  
Tour/Trace/A.Pan  
①Focus  
&Zoom  
Mode  
Auto/Tracking/Off  
Slow/Medium/Fast Fast  
②Zoom Tracking  
③Digital Zoom  
①Mode  
Off  
Speed  
⑥Auto Run  
Sequence  
Setting  
Off/2X/3X/4X/5X/.../12X  
ATW/INDOOR/OUTDOOR/AWC  
Off  
AT W  
117  
93  
50  
Auto  
F1.6  
---  
②Time  
1~60(Sec), 1~60(Min)  
30 Sec  
On  
⑦Power On  
Resume  
②White  
Balance  
On/Off  
AWB Mode  
Red  
Blue  
Manual  
⑧MD Dwell  
Time  
①Off  
②On  
①Brightness  
②Iris  
0~100  
Auto  
Manual  
1~60(Sec),1~60(Min)  
①Position  
②On/Off  
①Position  
②On/Off  
30 Sec  
Off  
①Pan Limit  
②Tilt Limit  
Iris Level  
①Pan/Tilt  
Limit  
③Exposure  
③Shutter  
④Sens-Up  
①Off  
---/A.FLK/Manual  
Sens-Up Limit  
X2/X4...X256  
Off  
Off  
Auto/Off  
Auto(X2)  
②Area Setting Area1~8  
①Name/②Position/③On/Off  
Off  
Low  
5
③Area  
Mask1~8  
Masking  
①Position/②On/Off  
Off  
Level  
Low/High  
0~10  
②HLC  
④Back Light  
Mask Color  
Up/Down/Left/Right/  
Increase/Decrease  
④Prop.P/T  
⑤Digital Flip  
On/Off  
On/Off  
On  
On  
①Camera  
Setting  
③User  
⑥Image Hold On/Off  
①Auto Track  
Off  
Off/Low/Medium/High  
Medium  
5 dB  
Medium  
⑤AGC  
Manual  
Level  
5~41  
On/Off  
②Camera Height 2.5m~30m  
Off  
③P/T  
Setting  
⑥SSNR  
Off/Low/Medium/High  
2.5 m  
Small  
High  
Off  
Off  
Off  
Auto  
③Object Size  
④Sensitivity  
⑤Zoom Control  
⑥Auto Release  
⑦Auto Return  
⑧Lost Mode  
Small/Medium/Large  
Burst Level  
0~100  
Burst On/Off  
Mode  
Color  
Color  
High/Medium/Low  
Off/One Shot/Continuous  
Off/10sec~5min  
Off/1sec~5min  
Stop/Research/Zoom Out  
①Position  
⑦Day  
&Night  
⑦Auto Track 1  
⑧Auto Track 2  
B/W  
Duration  
Slow/Fast  
Fast  
5 Sec  
Dwell Time  
5/7/10/15/20/30/40/60 Sec  
Internal  
Line Lock  
Stop  
Sync  
Internal  
Line Lock Phase  
②Mode(Alarm/  
Mask)  
③On/Off  
Stabilizer  
Image Adj.  
On/Off  
Off  
24  
50  
Off  
Inner  
①Zone Setting  
Zone1~8  
Mask  
⑧Others  
①Preset  
①Sharpness On(0~32)/Off  
②Color  
Off  
Off  
Off  
On  
Off  
0~100  
②Indicator  
Target Lock  
①Camera ID On/Off  
Off/On/Pointer/Target  
On/Off  
Freeze  
On/Off   
Dome Cover  
Inner/Outer/None  
①Setting②Edit③Home Position④Execute⑤Clear  
⑥Status  
②Camera  
Name  
①On/Off  
②Edit  
①Pan Swing  
②Swing SEQ. ②Tilt Swing  
③P&T Swing  
①Setting②Execute③Clear  
①Setting②Execute③Clear  
①Setting②Execute③Clear  
③Preset  
Number  
On/Off  
On  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
35  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Your Camera  
Functional Description  
④Preset  
Name  
①On/Off  
②Edit  
Camera Setting  
Off  
1. Focus and Zoom Settings  
1.1 Focus Mode and Digital Zoom Setting Menu  
⑤Sequence  
Status  
⑥Area Name On/Off  
On/Off  
On  
④OSD  
Setting  
Off  
Main Menu/Camera Setting/Focus & Zoom  
⑦PTZ  
On/Off  
Position  
On  
Focus Mode :  
- Auto : Performs continuous auto-focus.  
- Manual : Changes the camera mode to Manual Focus.  
- One Shot AF :Auto-focuses the camera once after the  
Pan,Tilt, or Zoom function is used.  
⑧Language  
①Alarm  
Enable  
English/Chinese/Fran ais/Deutsch/Espa ol/Italiano  
English  
Off  
ñ
ç
Main Menu  
On/Off  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
①In1  
MOD:NC/NO/OFF  
Priority:1~4   
SEQ:Preset/Swing/Group/Tour/  
A.Pan/Trace/Off  
②In2  
③In3  
④In4  
Out1~2  
②Alarm Input  
Off  
Off  
Digital Zoom :  
Enables the maximum digital zoom.  
Setting the digital zoom to 12X provides a total zoom of  
444x(SPD-3700T/3700)/396x(SPD-3310)/324x(SPD-2700).  
⑤Alarm  
Setting  
1~4,MD,TRK  
Off/On/Momentary  
1~60(Sec),  
③Alarm  
Output  
Status  
Time1~2  
Dwell Time  
1~60(Min),  
1~60(Hour)  
①On/Off  
②Time  
On/Off  
1~60(Sec), 1~60(Min)  
Off  
④Aux. Output  
Camera Setting  
①Power On  
Reset  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
Cancel/Execute  
Cancel/Execute  
Cancel/Execute  
Off,1~7Days  
Notes  
ATW  
②Factory  
Default Set  
③Camera  
Default Set  
④Auto  
Refresh  
⑤Auto Track  
Default  
•ꢀUnliketheopticalzoom,thegraphicsqualityoftheꢀ  
digital zoom decreases as its zoom power increases.  
•ꢀTheauto-focusfunctionmaynotoperatenormallyꢀ  
under the following conditions :  
- When background illumination is low  
- While Slow-Shutter is in operation  
⑥Initialize  
⑦Status  
Medium  
Medium  
SSNR  
Off  
Day & Night  
Others  
Cancel/Execute  
- If the zoom level is set too high  
- When background illumination is too high  
- If a long distance object and a close distance object  
appear together within a monitoring area  
- If there is no contrast, e.g. the sky or a wall  
- If the camera is facing a thin horizontal line  
•ꢀAutoFocusꢀfocusesꢀonꢀanꢀobjectꢀinꢀtheꢀcenterꢀofꢀtheꢀ  
screen; objects around the screen edges may not be  
properly in focus.  
Focus & Zoom  
Focus Mode  
ONE SHOT AF  
Zoom Tracking  
Digital Zoom OFF  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
37  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
2. White Balance  
1.2 Zoom Tracking  
Main Menu/Camera Setting/Focus & Zoom/Zoom Tracking  
Main Menu/Camera Setting/White Balance  
Through this menu you can set up the camera’s focus mode  
when zooming.  
The White Balance menu adjusts the balance of the screen  
colors under different lighting conditions.  
Main Menu  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Mode :  
- ATW :Adjusts the screen color automatically.  
- Indoor :Adjusts the screen color to be optimal in an  
indoor environment.  
- Outdoor :Adjusts the screen color to be optimal in an  
outdoor environment.  
- AWC :Adjusts the screen color to be optimized to the  
current lighting and monitor conditions. Using this  
setting may require an readjustment if the lighting  
conditions changes.  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
- Auto :Auto-focuses when zooming.  
- Tracking : Focuses manually when zooming.  
- Off : Disable the focus modes when zooming. (Full  
manual mode)  
Status  
Speed :  
Status  
- Slow/Fast :Adjusts the zooming speed.  
Camera Setting  
- MANUAL : Enables customization the Red and Blue gains.  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
SSNR  
Day & Night  
Others  
Camera Setting  
ATW  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
ATW  
Medium  
Medium  
OFF  
Medium  
Medium  
SSNR  
Day & Night  
Others  
Focus & Zoom  
Focus Mode  
Zoom Tracking  
Digital Zoom OFF  
ONE SHOT AF  
Notes  
White Balance may not work properly under the following conditions.  
When the color temperature of the environment surrounding the subject is out of the  
control range.(e.g. Clear sky or sunset)  
When the ambient illumination of the subject is dim.  
Zoom Tracking  
If the camera is directed towards a fluorescent light or is installed in a place where  
illumination changes dramatically, White Balance adjustments may not deliver  
consistent results.  
Mode  
AUTO  
FAST  
Speed  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
39  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
3. Exposure  
4. Backlight  
4.1 Backlight Mode Settings  
Main Menu/Camera Setting/Exposure  
Main Menu/Camera Setting/Back Light  
The Exposure settings are to control the camera’s exposure  
meter.  
Main Menu  
Camera Setting  
Unlike other cameras, Samsung Techwin’s unique SV-IV DSP  
chip gives you a clear image of the subject even with bright  
backlight.  
Main Menu  
Brightness : Adjusts the screen brightness.  
(Over 50: Brighter, Under 50: Darker)  
Iris :  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
- Auto :Automatically adjusts the exposure meter.  
- Manual : Enables manual adjustment of the exposure  
meter. (Over 50: Brighter, Under 50: Darker)  
Shutter : Controls the camera’s electronic shutter.  
- --- :The shutter speed is fixed at 1/60 for NTSC and 1/50  
for PAL. Operates when Iris is on the Auto Mode.  
- ESC :Adjusts the shutter speed automatically according  
to the screen brightness. Operates when Iris is on  
the Manual Mode.  
- A.FLK : Select this setting when you experience picture  
flickering. Flickering can happen when artificial  
lighting frequencies clash with camera frame rates.  
- Manual : Enables manual adjustment of the shutter speed.  
Sens-Up :  
Back Light Mode  
:
- Off : Disables the Backlight mode.  
- HLC :Activates the High Light Compensation mode.  
- User :Activates a user defined backlight compensation  
mode.  
Status  
Status  
Camera Setting  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
Camera Setting  
ATW  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
ATW  
OFF  
Medium  
Medium  
OFF  
SSNR  
- Auto :Automatically detects light levels and maintains a  
clear picture at night or under low-light conditions.  
- Sens-Up Limit :Adjusts to the maximum-powered zoom  
per frame.  
Medium  
Medium  
Day & Night  
Others  
SSNR  
Day & Night  
Others  
Notes  
Exposure  
Brightness  
Iris  
Shutter  
Sens-Up  
050  
AUTO  
---  
•ꢀForoptimalperformanceoftheꢀA.FLKmode,avoidꢀ  
using the mode in conjunction with Backlight.  
•ꢀWhiletheInternalꢀSyncꢀmodeꢀisꢀinꢀeffect,ꢀsettingꢀtheꢀ  
shutter to '---' and facing the camera directly to a  
bright light source may cause poor camera  
performance.  
AUTO  
•ꢀSens-UpꢀisꢀdisabledꢀwhenꢀtheꢀshutterꢀisꢀinꢀManualꢀorꢀ  
A.ꢀFLKꢀmode.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
41  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
4.2 HLC  
4.3 User Area Setting  
Main Menu/Camera Setting/Back Light/HLC  
Main Menu/Camera Setting/Back Light/User  
The HLC settings selectively eliminates high lights in a limited  
environment such as the entrance to an apartment parking lot  
or gas station, and is useful to detect a small objects like car  
license plates.  
HLC is disabled during the daytime.While monitoring  
nighttime car traffic, if car headlamps reflect too bright lights  
on the screen, the camera automatically eliminates the  
headlamp lights and adjusts the colors of the license plate  
accordingly.  
Main Menu  
You can selectively choose a screen area to see objects within  
the area more clearly than others.  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Four-direction Joystick Controls :  
- Moving the joystick in all four directions—upward,  
downward, left, and right—adjusts the location and size  
of a selected area.  
Zoom Control :  
- Zoom Tele : Enlarges the size of a selected area.  
- Zoom Wide : Reduces the size of a selected area.  
Status  
Status  
Camera Setting  
HLC Masking Area  
Camera Setting  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
SSNR  
Day & Night  
Others  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
SSNR  
Day & Night  
Others  
ATW  
ATW  
HLC  
Medium  
Medium  
USER  
Medium  
Medium  
<HLC OFF>  
<HLC ON>  
Limit  
:
HLC Setting  
Adjusts the HLC sensitivity level.  
Mask Color  
Adjusts the mask color on the highlighted area.  
:
Limit  
Mask Color  
Medium  
05  
:Up:Down :Left :Right  
W:Decrease T:Increase  
Notes  
•ꢀEvenꢀifꢀHLCꢀisꢀon,ꢀcarꢀlicenseꢀplatesꢀmayꢀnotꢀbeꢀdetectableꢀdependingꢀonꢀtheꢀlocationꢀandꢀ  
angle of the camera as well as the lighting condition.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
43  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
5. AGC  
6. SSNR (Samsung Super Noise Reduction)  
Main Menu/Camera Setting/AGC  
Main Menu/Camera Setting/SSNR  
AGC (Automatic Gain Control) adjusts the camera’s gain  
control and the screen brightness if the camera has captured  
an object under low-light conditions.  
SSNR significantly reduces the amount of low luminance noise.  
Main Menu  
Main Menu  
- Off : Disables the noise reduction function.  
- Low : Reduces only a small amount of noise, but generates  
almost no afterimage.  
- Medium :The most commonly used mode. Reduces a suitable  
amount of noise while generating a subtle  
afterimage.  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
The Off, Low, Medium, High, and Manual modes are available.  
- High : Reduces noise significantly, but generates obvious  
afterimages.  
Status  
Status  
Camera Setting  
Camera Setting  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
ATW  
ATW  
OFF  
OFF  
Medium  
Medium  
Medium  
Medium  
SSNR  
SSNR  
Day & Night  
Others  
Day & Night  
Others  
Notes  
•ꢀSSNRꢀisꢀdisabledꢀwhenꢀtheꢀAGCꢀmodeꢀisꢀturnedꢀoff.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
45  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
7. Day & Night  
8. Others  
Main Menu/Camera Setting/Day & Night  
Main Menu/Camera Setting/Others  
Sync  
: Enables selecting Internal Synchronization or the  
Main Menu  
The Day & Night function allows the camera to switch  
between the Color and B/W modes.  
Main Menu  
external Line Lock. (SPD-3700T not supported)  
Camera Setting  
- Internal : Synchronizes the camera’s output timing to the  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Modes  
:
internal crystal.  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
- Line Lock : Synchronizes the camera’s output timing to  
the AC adapter power to synchronize multiple  
cameras.This option is useful when using a  
switch such as Matrix Switcher.  
- Auto : Operates in Color mode most times, and switches  
to B/W mode if a low light level is detected during  
nighttime.  
- Color : Operates in Color mode at all times.  
- B/W : Operates in B/W mode at all times. By using the  
Burst On/Off sub menu, burst signals can be  
retained or disabled.  
Status  
- Line Lock Phase : Enables setting the adapter’s  
synchronization phase between 0 and  
360°.  
Status  
Stabilizer  
: The Stabilizer compensates for any small  
movements of the camera caused by due to  
the wind and other reasonsor other causes.  
Camera Setting  
Camera Setting  
If the camera is in B/W mode and connected to equipment  
that requires external sync through burst signals, set the  
Burst On/Off option to “On.”  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
SSNR  
Day & Night  
Others  
Focus & Zoom  
White Balance  
Exposure  
Back Light  
AGC  
SSNR  
Day & Night  
Others  
ATW  
ATW  
Notes  
OFF  
Medium  
Medium  
Duration  
:
OFF  
Medium  
Medium  
•ꢀTheStabilizerusesthedigitalzoomandmaycauseꢀ  
low picture quality.  
•ꢀTheStabilizerisdisablediftheambientlightistooꢀ  
low.  
•ꢀTheꢀStabilizerꢀisꢀdisabledꢀifꢀtheꢀfieldꢀofꢀviewꢀhasꢀveryꢀ  
low or no contrast, e.g. The sky or a white wall.  
The camera’s light sensitivity is adjustable as in the chart  
below.The camera’s ambient light diversion performance  
may vary depending on its environment.  
Color -> B/W  
2.5 Lux  
B/W -> Color  
4 Lux  
Fast  
Slow  
0.8 Lux  
6 Lux  
Others  
Image Adj  
:
Day & Night  
- Sharpness : Sharpens outlines of an image.  
- Color :Adjusts the color density of an image.  
Sync  
INTERNAL  
OFF  
Dwell Time  
:
Mode  
COLOR  
Stabilizer  
Image Adj  
Freeze  
The duration of both the lighting conditions can be  
customized to let the camera divert between the daytime  
and nighttime settings.  
Duration  
Dwell Time  
FAST  
Freeze  
: Stops or reanimates an image.  
0.5 SEC  
Dome Cover  
:
OFF  
Inner  
These settings are to optimize the camera’s focused object  
position according to the dome cover type.  
- Inner : Default dome cover type including the indoor flush  
model. (Factory Release Mode)  
Dome Cover  
Notes  
•ꢀTheꢀAutoꢀmodeꢀisꢀdisabledꢀwhenꢀAGCꢀisꢀturnedꢀoff.ꢀThisꢀfunctionꢀisꢀonlyꢀavailableꢀwhenꢀ  
the Color or B/W mode is selected.  
•ꢀUsingB/Wꢀmodeꢀunderꢀsunlightꢀorꢀaꢀhalogenꢀlampꢀmayꢀdecreaseꢀtheꢀfocusingꢀ  
- Outer : Dome cover type for outdoor housings except the  
indoor flush model.  
performance.  
- None :When using the camera without a dome cover.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
47  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
Sequence Setting  
10. Preset  
10.1 Preset Location Saving  
9. Power On Resume and MD Dwell Time  
Main Menu/Sequence Setting/Preset/Setting  
Main Menu/Sequence Setting  
This function enables the memorization of a selected location  
and activates the Pan,Tilt, and Zoom functions at that location.  
Saved locations can be recalled using the Preset Execute  
command.  
Main Menu  
Power On Resume  
:
Main Menu  
Camera Setting  
This is useful when the power is disconnected and  
reconnected due to power failures or other power  
interruptions.  
If the camera was performing a sequence action prior to a  
power disconnection, the camera automatically resumes  
the action when the power is reconnected.  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Setting Up Preset Numbers  
:
Selecting the Preset Setting menu brings up a screen as  
shown below. Move the joystick in all four directions to  
select the desired number.  
Status  
MD Dwell Time  
:
Status  
When Motion Detection under the Preset Edit menu is  
selected, MD Dwell Time performs the Tour or Group  
function.  
While the camera is performing a sequence action, if  
motion is detected from a selected preset location, the  
camera pauses the sequence action operation and starts  
monitoring the location instead for a duration that is set  
under the MD Dwell Time menu.  
Preset Setting  
Preset = 001 (255)  
Sequence Setting  
Sequence Setting  
Preset  
Preset  
Swing SEQ  
Group SEQ  
Tour SEQ  
Swing SEQ  
Group SEQ  
Tour SEQ  
Saving Preset Locations  
:
Selecting a preset number and pressing the Enter key  
redirects the menu to the screen shown below.  
Using the joystick, adjust the location of the Pan and Tilt  
functions and then set the Zoom and Focus command.  
In Preset Settings, the Zoom and Focus command is  
controllable only by the Zoom command.To switch  
between Zoom and Focus, use the Preset 1 and 2  
commands as shown below.  
PTZ Trace  
Auto Run  
PTZ Trace  
Auto Run  
If the motion is no longer detectable or the duration  
expires, the camera aborts the monitoring operation and  
then resumes the sequence action.  
Power On Resume  
MD Dwell Time  
ON  
Power On Resume  
MD Dwell Time  
ON  
ON  
OFF  
Preset  
Setting  
Edit  
Execute  
Clear  
Status  
Preset Setting Z>Z00M  
1+PST:ZOOM 2+PST:FOCUS  
Use W/T Preset  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
49  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
10.3 Preset Name Setting  
10.2 Preset Edit  
Main Menu/OSD Setting/Preset Name/Edit  
Main Menu/Sequence Setting/Preset/Edit  
Using this function, you can add names to preset locations.  
up to 12 characters.  
Once a name is entered, use the joystick and the Enter key to  
perform the Set command and save the name.  
You can edit the 13 preset items such as Pan/Tilt location,  
Zoom and Focus, which are selected among camera functions.  
Main Menu  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
PTZ  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Recalls saved locations using the Preset Settings command.  
....  
Focus Mode  
:
Refer to the section entitled Setting Up Your Camera.  
Sequence Setting  
Brightness  
:
Status  
Preset  
Swing SEQ  
Group SEQ  
Refer to the section entitled Setting Up Your Camera.  
Iris  
:
OSD Setting  
....  
Refer to the section entitled Setting Up Your Camera.  
Camera ID  
ON  
ON  
Backlight  
:
Camera Name  
Preset Number  
Preset Name  
Preset  
Refer to the section entitled Setting Up Your Camera.  
Setting  
Edit  
Home Position  
Execute  
Clear  
Status  
Day & Night  
:
....  
Refer to the section entitled Setting Up Your Camera.  
OFF  
After Act  
:
Enables setting up an automatic action after the camera  
arrives at a selected preset location.  
- TRACK : Commands the camera to perform the Auto  
Tracking function.  
- MD : Commands the camera to perform the Motion  
Detection function.  
Preset Name  
ON/OFF  
Edit  
OFF  
Preset Edit  
Preset = 001* (1~255)  
Preset Edit  
- None : Select this when no action is desired.  
Preset = 001* (1~255)  
Preset Edit  
[001]  
Scene Adj  
:
Enables setting the Shutter,AGC, SSNR, Sens-Up,White  
Balance, and Stabilizer functions. For more information  
about interface terminology, please refer to the section  
entitled Setting Up Your Camera.  
PTZ  
271/045/1X  
ONE SHOT AF  
050  
PSET Name 001[  
]
Focus Mode  
Brightness  
Iris  
Back Light  
Day & Night B/W  
0123456789()[]#&%/~-=_  
AUTO  
ABCDEFGHIJKLMNOPQRSTUVWXYZ  
abcdefghijklmnopqrstuvwxyz  
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí  
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚ  
ABC->中文1 BACK SPACE CLR SET  
After Act.  
Scene Adj.  
OFF  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
51  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
11. Swing SEQ  
10.4 Preset Execution/Deletion/Memory Check  
Main Menu/Sequence Setting/Swing SEQ  
Main Menu/Sequence Setting/Preset  
Home Position  
Sets one of the currently configured preset positions as the  
home position.  
The Swing function commands the camera to move between 2  
selected locations, monitoring the route.  
:
Main Menu  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Pan Swing  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Execute  
:
Activates the Pan function for the Swing operation.  
Tilt Swing  
Recalls a saved preset location.  
:
Activates the Tilt function for the Swing operation.  
Clear  
:
P&T Swing  
:
Deletes the selected preset location.  
Status  
Status  
Activates both the Pan and Tilt functions for the Swing  
operation.  
Status  
:
Opens a map of saved preset locations.  
An area saved as a preset location is displayed with the  
Swing Settings/Execute/Clear  
:
Sequence Setting  
Sequence Setting  
- Settings : Each of the Swing menus have sub menus with  
'' icon.  
Preset  
the settings.  
Preset  
Swing SEQ  
Group SEQ  
Tour SEQ  
Swing SEQ  
Group SEQ  
Tour SEQ  
Preset Status  
Pan Swing  
001 :  
021 :  
041 :  
061 :  
081 :  
101 :  
121 :  
141 :  
161 :  
□□□□□ □□□□□ □□□□□ □□□□□  
PTZ Trace  
Auto Run  
Setting  
Execute  
Clear  
PTZ Trace  
Auto Run  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
Power On Resume  
MD Dwell Time  
ON  
Power On Resume  
MD Dwell Time  
ON  
OFF  
OFF  
Pan Swing Setting  
Swing SEQ  
Preset  
[001]←→[***]  
Pan Swing  
Setting  
Tilt Swing  
P&T Swing  
Edit  
SPEED=64 (1~64)  
Home Position  
Execute  
Clear  
OFF  
DWT =003(1~128)(s)  
Preset Status  
181 :  
201 :  
221 :  
241 :  
□□□□□ □□□□□ □□□□□ □□□□□  
Select 2 preset locations by using the joystick.  
Speed indicates the camera’s movement speed. DWT indicates  
the camera’s duration of stay at a preset location.  
- Execute: Executes the Swing operation.  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
□□□□□ □□□□□ □□□□□ □□□□□  
Status  
- Clear: Deletes data in the Swing memory.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
53  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
12. Group SEQ  
13. Tour SEQ  
Main Menu/Sequence Setting/Group SEQ  
Main Menu/Sequence Setting/Tour SEQ  
Selecting Group SEQ recalls a group of multiple preset  
locations in a consecutive manner.A group can contain up to  
255 preset locations.  
Main Menu  
Selecting Tour SEQ recalls groups of preset locations in a  
consecutive manner. Up to 6 groups can be listed for this  
function.  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Setting  
:
Settings  
:
Using the joystick, enter desired preset numbers into the  
PSET section. DWT indicates the camera’s duration of stay  
at a preset location. SPD shows the camera’s movement  
speed by 64 different levels.  
Selecting the Settings menu brings up the following screen.  
Using the joystick, you can enter desired group numbers to  
the Group section. DWT indicates the camera’s standby  
time before a new group is recalled.  
Status  
Status  
Group SEQ 1  
Sequence Setting  
Tour SEQ  
Sequence Setting  
NO  
PSET DWT(s) SPD  
Preset  
NO  
Group  
DWT(s)  
003  
003  
003  
003  
001: *** : 003 : 64  
002: *** : 003 : 64  
003: *** : 003 : 64  
004: *** : 003 : 64  
005: *** : 003 : 64  
006: *** : 003 : 64  
007: *** : 003 : 64  
Preset  
Swing SEQ  
Group SEQ  
Tour SEQ  
PTZ Trace  
Auto Run  
01: *  
02: *  
03: *  
04: *  
05: *  
06: *  
Swing SEQ  
Group SEQ  
Tour SEQ  
PTZ Trace  
Auto Run  
003  
003  
Power On Resume  
MD Dwell Time  
ON  
OFF  
Power On Resume  
MD Dwell Time  
ON  
OFF  
Execute  
:
Execute  
:
Group SEQ  
Executes the group operation.  
Executes the group operation.  
Clear  
Deletes the selected group.  
Clear  
Tour SEQ  
:
Group 1  
Group 2  
Group 3  
Group 4  
:
Deletes the selected group.  
Setting  
Execute  
Clear  
....  
Group SEQ 1  
Setting  
Execute  
Clear  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
55  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
14. PTZ Trace  
15. Auto Run  
Main Menu/Sequence Setting/PTZ Trace  
Main Menu/Sequence Setting/Auto Run  
Maximum 4 patterns of the manual operation paths (for Pan,  
Tilt, Zoom and Focus) are memorized and replayed.  
Main Menu  
If there is no controller operation by the user for a certain time,  
the sequence operation designated by the user will be  
executed.  
Main Menu  
Camera Setting  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Replay  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Replays a route saved by the Trace function. Use the Stop  
button to stop the replay.  
Mode  
:
- Home :Auto run Home Position (Refet to the Preset  
Menu.)  
Memorize  
:
Up to 120 seconds of a memory can be saved.The memory  
duration varies depending on the difficulty level of the PTZ  
Trace action. If the memory capacity is full, the Over  
message appears and the memorization action is  
terminated.  
- Preset :Auto run a selected preset number.  
- Swing :Auto run a selected Swing mode.  
- Group :Auto run a selected Group mode.  
- Tour :Auto run a selected Tour mode.  
- Trace :Auto run a selected trace mode.  
- A.Pan :Auto run a 360-degree pan.To activate the  
panning command, you need to set up the  
camera's tilt angle and auto pan speed manually.  
Status  
Status  
Sequence Setting  
Sequence Setting  
Preset  
Preset  
Swing SEQ  
Group SEQ  
Tour SEQ  
Swing SEQ  
Group SEQ  
Tour SEQ  
PTZ Trace  
Auto Run  
Time  
:
PTZ Trace  
Auto Run  
Enables setting up an Auto Run duration. (The duration can  
be 1~60 seconds, or 1~60 minutes.)  
Power On Resume  
MD Dwell Time  
ON  
Power On Resume  
MD Dwell Time  
ON  
OFF  
OFF  
PTZ Trace  
Auto Run  
Trace 1  
Trace 2  
Trace 3  
Trace 4  
Mode  
Time  
OFF  
30 SEC  
PTZ Trace 1  
Replay  
Memorize  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
57  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
P/T Setting  
17. Area Setting  
Main Menu/P/T Setting/Area Setting  
16. Pan/Tilt Limit  
Main Menu/P/T Setting/Pan/Tilt Limit  
The moving ranges in the Pan/Tilt directions can be limited.  
Position  
The Area Setting menu enables selecting certain locations in  
the course of the Pan and Tilt operation, and then display the  
areas with the OSD (On Screen Display) texts when the camera  
passes through them. Up to 8 areas can be selected.  
Main Menu  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Main Menu  
Camera Setting  
:
Area Name  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Selecting the Position menu brings up the following screen  
if it is for the Pan Limit setting. Move the joystick left and  
right to select a movement range from the starting point to  
the end.  
You can add names to selected areas. Names can be up to  
12 characters and can be entered via the joystick and the  
Enter key. Once a name is entered, use the joystick and the  
Enter key to perform the Set command and save the name.  
Status  
Status  
P/T Setting  
Start Limit  
End Limit  
Area Name 001[  
0123456789()[]#&%/~-=_  
]
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Digital Flip  
Image Hold  
P/T Setting  
ABCDEFGHIJKLMNOPQRSTUVWXYZ  
abcdefghijklmnopqrstuvwxyz  
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí  
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚ  
ABC->中文1 BACK SPACE CLR SET  
ON  
ON  
OFF  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Enter: Set  
ESC: Exit  
Enter: Set  
ESC: Exit  
Auto Track1  
Auto Track2  
ON  
Digital Flip  
Image Hold  
ON  
The following picture shows the Tilt Limit setting.  
Move the joystick left and right to select a movement  
range from the starting point to the end.  
OFF  
Position  
:
Auto Track1  
Auto Track2  
As shown in the picture below, move the joystick to select  
the upper left corner and lower right corner of an area.  
Area Setting  
Area 1  
Area 2  
Area 3  
Area 4  
Start Limit  
End Limit  
Start Position  
End Position  
Pan/Tilt Limit  
Pan Limit  
....  
Tilt Limit  
Pan/Tilt Limit  
Enter: Set  
ESC: Exit  
Enter: Set  
ESC: Exit  
Area 1  
Enter: Set  
ESC: Exit  
Enter: Set  
ESC: Exit  
Area Name  
On/Off  
Position  
ON/OFF  
:
Position  
ON/OFF  
On/Off  
:
Cancels or activates the Pan/Tilt Limit functions.  
OFF  
OFF  
Cancels or activates the display function of selected areas.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
59  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
18. Area Masking  
19. Prop. P/T  
Main Menu/P/T Setting/Area Masking  
Main Menu/P/T Setting/Prop. P&T  
If a monitoring location includes a highly private area, the area  
can be selectively excluded from monitoring.  
Main Menu  
This commands the camera to change the Pan and Tilt speed  
automatically according to the current zoom power. Moving  
the joystick clockwise (Tele) slows down and counterclockwise  
(Wide) accelerates the Pan and Tilt speed, allowing detailed  
adjustments.  
Main Menu  
Camera Setting  
Camera Setting  
Position  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
As shown in the picture below, move the joystick to select  
the upper left corner and lower right corner of an area.  
Turning this “Off” executes the function the optical 1x zoom  
speed regardless of how high a the zoom power is.  
Status  
Start Position  
End Position  
Status  
P/T Setting  
P/T Setting  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Enter: Set  
ESC: Exit  
Enter: Set  
ESC: Exit  
ON  
ON  
Digital Flip  
Image Hold  
ON  
Digital Flip  
Image Hold  
ON  
On/Off  
:
OFF  
OFF  
Cancels or activates the Area Masking function.  
Auto Track1  
Auto Track2  
Auto Track1  
Auto Track2  
Area Setting  
Mask 1  
Mask 1  
Mask 3  
Mask 4  
....  
Mask 1  
Position  
ON/OFF  
OFF  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
61  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
20. Digital Flip  
21. Image Holding  
Main Menu/P/T Setting/Digital Flip  
Main Menu/P/T Setting/Image Hold  
When the camera is moving between preset locations, this  
function stops a previous camera feed until the camera  
reaches the next location.This is useful to help the screen  
observer keep sharp eyes and to monitor multiple locations  
within a network.  
Digital Flip is useful to monitor a moving object or a person  
passing directly under the camera.  
Main Menu  
Main Menu  
Camera Setting  
Camera Setting  
When an object or a person passes directly under the camera,  
the camera tilt monitor follows the object or person over 100  
degrees to the other side of the tilt area without panning.The  
screen inversion occurs at 100 degrees or higher and is  
digitally adjusted.  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Status  
Status  
P/T Setting  
P/T Setting  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
ON  
ON  
Digital Flip  
Image Hold  
ON  
Digital Flip  
Image Hold  
ON  
OFF  
OFF  
Auto Track1  
Auto Track2  
Auto Track1  
Auto Track2  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
63  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
Auto Release  
:
22. Auto Track 1 (SPD-3700T Only)  
Enables setting a maximum duration to follow an object.When the duration expires, the camera  
Main Menu/P/T Setting/Auto Track1  
stops following the object and returns to the start position to follow another objects.  
This function is available only with the SPD-3700T.  
This commands the camera to automatically follow a moving  
object or a person on the screen.  
Auto Return  
:
Main Menu  
- Off : Commands the camera to stay on a last spot instead of returning to the initial position.  
- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and  
then return to the start position.  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Auto Track  
:
Lost Mode  
:
On/Off:Turns Auto Track on or off.  
Sets up an action for the camera in case the object it is following goes out of the detection  
range.  
- Stop : Commands the camera to stop and abort tracking at the spot where its object  
Camera Height  
:
Adjusts the height of the camera.Tracking performance  
may decrease if the camera height is not adjusted properly.  
Status  
disappeared.  
Object Size  
:
- Research : Commands the camera to stop and standby at the spot where its object  
P/T Setting  
Sets a maximum zoom power to zoom in on an object if  
the Zoom function is used for the tracking operation.  
- Small : Zooms in on a tracking object up to 1/4 of the  
screen height.  
- Medium : Zooms in on a tracking object up to 2/4 of the  
screen height.  
disappeared.  
- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current  
object disappears.  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
ON  
Digital Flip  
Image Hold  
ON  
OFF  
- Large : Zooms in on a tracking object up to 3/4 of the  
screen height.  
Auto Track1  
Auto Track2  
Sensitivity  
:
The object detection sensitivity is adjustable. Lower the  
sensitivity if the camera catches a swaying tree branch,  
raindrops, or snowflakes during the Auto Track operation.  
Auto Track 1  
Auto Track  
OFF  
Zoom Control  
:
Camera Height  
Object Size  
Sensitivity  
Zoom Control  
Auto Release  
Auto Return  
Lost Mode  
02.5M  
SMALL  
HIGH  
OFF  
The function’s zoom control settings are as follows.  
- Off : Disables the Zoom control.  
- One Shot : Performs the Zoom control once during the  
Motion Detection and Auto Track operations.  
Depending on the movement detection, the  
camera performs the Zoom control multiple  
times.  
OFF  
OFF  
STOP  
- Continuous : Performs the Zoom control continuously.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
65  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
- Target : Indicates the camera’s target for the Auto Track operation; when a moving object is  
detected, a square grid appears and surrounds the object.  
23. Auto Track 2 (SPD-3700T Only)  
Main Menu/P/T Setting/Auto Track2  
Target Lock  
:
This function is available only with the SPD-3700T.  
Auto Track 2 provides Auto Track related settings other than  
the ones programmed in the Auto Track 1 menu.  
Target Lock is useful to select and follow an object using the Auto Track mode while operating  
the camera with the joystick.Target Lock can be turned On or Off.  
To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then press  
Enter.  
Main Menu  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Zone Setting  
:
- Position : Enables designating certain areas as zones for  
the Auto Track operation.The setting procedures  
are the same as for Area Mask.  
- Mode :Two modes are available: Mask and Alarm. When  
Mask is selected, the camera does not follow the  
object entering the masked zone. This is useful if  
the camera catches swaying objects such as tree  
branches and flags during the Auto Track peration.  
When Alarm is selected, the camera activates an  
alarm if an object enters the zone.  
Status  
P/T Setting  
Pan/Tilt Limit  
Area Setting  
Area Masking  
Prop. P/T  
Notes  
- On/Off :Activates or deactivates the Zone function.  
ON  
•ꢀAutoꢀTrackꢀisꢀspecificallyꢀtoꢀtrackꢀdownꢀintruders.ꢀThus,ꢀitꢀmayꢀnotꢀbeꢀsuitableꢀtoꢀmonitorꢀaꢀ  
crowd.  
•ꢀIfꢀtheꢀcameraꢀisꢀnotꢀsafelyꢀsecured,ꢀtrackingꢀerrorsꢀmayꢀoccur.  
•ꢀIfthecameralensissmearedwithforeignsubstancesorisscratched,anerrormayꢀ  
occur causing the camera to not behave as expected.  
•ꢀThecameramaynotfollowanobjectortrackingerrorsmayoccurunderthefollowingꢀ  
conditions:  
If the contrast between an object and the background is low  
If the camera lens is smeared with foreign substances, e.g. raindrops or snowflakes  
If the lighting is changing dramatically  
If many movements around an object are detected  
If an object moves vertically on the optic angle of the camera  
If an object passes directly under the camera  
If an object creates inconsistent light levels, e.g. the object is too shiny or flickering  
In environments where there are light reflections causing internal reflections of camera,  
e.g. windows, shiny road surfaces, and backlights  
If an object moves behind large and tall objects, e.g. telephone poles  
If an object moves too quickly  
Digital Flip  
Image Hold  
ON  
OFF  
Track Zone  
Zone 1  
Zone 1  
Auto Track1  
Auto Track2  
Position  
Zone 2  
Zone 3  
Zone 4  
Zone 5  
Zone 6  
Zone 7  
Zone 8  
Mode  
MASK  
OFF  
ON/OFF  
Auto Track 2  
Zone Setting  
Indicator  
OFF  
OFF  
Target Lock  
Indicator  
:
Indicates objects with icons on the screen.  
- Off : Disables the Indicator function.  
- On : Indicates both the pointer and target.  
- Pointer : Indicates the indicator when following an object  
using the joystick; shows as a cross in the center  
of the screen.  
If the camera is vibrating  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
67  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
OSD Setting  
Alarm Setting  
24. OSD Setting  
25. Alarm Setting  
25.1. Setting Up Alarm Input  
Main Menu/OSD Setting  
Main Menu/Alarm Setting/Alarm Input  
Camera ID  
:
Main Menu  
Displays or hides Camera ID in the upper left of the screen.  
Camera Name  
Add a name to the camera. (First check the Note.)  
Camera Setting  
Alarm Enable  
:
:
Main Menu  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
- On/Off : Enables or disables the Alarm function.  
Camera Setting  
MOD  
Preset Number  
:
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Enables selecting an Alarm Input method.  
- NO (Normally Open)  
Displays or hides Preset Numbers on the screen.  
Preset Name  
:
Status  
Add names to preset locations. (First check the Note.)  
IN 1.2.3.4  
IN 1.2.3.4  
Sequence Status  
Displays or hides the status of a sequence action that is in  
progress.  
:
Status  
OSD Setting  
Camera ID  
ON  
Area Name  
:
Camera Name  
Preset Number  
Preset Name  
Alarm Setting  
ALM GND  
ALM GND  
ALARM ON  
Displays or hides the Area Name for the Area Settings on  
the screen.  
ON  
ON  
Alarm Enable  
Alarm Input  
Alarm Output  
Aux Output  
OFF  
ALARM OFF  
PTZ Position  
:
Sequence Status ON  
Area Name  
PTZ Position  
Language  
OFF  
ON  
English  
Displays or hides the status of the Pan,Tilt, and Zoom  
operation that is in progress.  
Language  
:
- NC (Normally Closed)  
Enables changing the system language.This camera  
supports English, Chinese, French, German, Spanish, and  
Italian.  
ALM MOD P SEQ. NO  
IN 1.2.3.4  
IN 1.2.3.4  
ALM GND  
IN1 OFF 1  
IN2 OFF 2  
IN3 OFF 3  
IN4 OFF 4  
OFF  
OFF  
OFF  
OFF  
XXX Name 001[  
0123456789()[]#&%/~-=_  
]
ALM GND  
When selecting the Camera Name and Preset  
Name, the screen displays the Left keypad.  
ABCDEFGHIJKLMNOPQRSTUVWXYZ  
abcdefghijklmnopqrstuvwxyz  
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí  
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚ  
ABC->中文1 BACK SPACE CLR SET  
ALARM OFF  
ALARM ON  
Names can be up to 12 characters and can be  
entered via the joystick and the Enter key. Once a  
name is entered, use the joystick and the Enter key  
to perform the Set command and save the name.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
69  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
25.2. Alarm Output  
Notes  
Main Menu/Alarm Setting/Alarm Output  
•ꢀAsꢀshownꢀinꢀtheꢀpictureꢀabove,ꢀtheꢀAlarmꢀInputꢀmustꢀbeꢀenteredꢀwithꢀtheꢀOpenꢀandꢀCloseꢀ  
switch signals. Supplying power without entering the signals may damage the product.  
Setting 1,2  
:
Main Menu  
Enables selecting an Alarm Output method.  
- 1, 2, 3, 4, and MD on the menu selection indicate the  
alarm input port and motion detection input. Up to 4  
alarm inputs can be set for each MD (Motion Detection)  
and TRK (Auto Track). 1 alarm output port can be used for  
more than 2 alarm inputs along with ones for MD and  
TRK.  
Camera Setting  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
P (Priority)  
:
Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,  
the alarm with the highest priority activates before the others. Once the alarm is canceled, the  
next highest priority alarm activates.  
SEQ  
:
Status  
The TRK function becomes activated only if the Zone mode  
under Zone Settings under Auto Track 2 is set to Alarm.  
Enables setting up a sequence action for the camera in response to an alarm.Available  
sequence actions are Preset, Swing, Group,Tour,Trace and A.Pan.  
Timer  
Alarm Setting  
:
Enables selecting an Alarm Output method.  
- On : Retains an alarm output for a set duration from a  
minimum of 1 second to a maximum of 60 hours  
upon the alarm occurrence.  
Alarm Enable  
Alarm Input  
Alarm Output  
Aux Output  
OFF  
- Momentary : Retains an alarm output only until the alarm  
is canceled.  
The Alarm Output is equipped with a relay circuit.The  
operation of the alarm output port is as shown in the  
diagram below.  
Alarm Output  
Setting1  
Setting2  
Timer  
1 2 3 4  
1 2 3 4  
1 OFF  
MD  
MD  
TRK  
TRK  
NO  
NO  
Timer  
1 OFF  
COM  
NC  
COM  
NC  
Alarm Out OFF  
Alarm Out ON  
Notes  
•ꢀConnectingꢀtheꢀpowerꢀconnectorꢀandꢀGNDꢀincorrectlyꢀtoꢀtheꢀNC/NOꢀandꢀCOMꢀportsꢀmayꢀ  
cause a short circuit and fire, damaging the camera.  
•ꢀThemaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,andꢀ  
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s  
lifespan and damage it.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
71  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Functional Description  
25.3. Aux Output  
Initialize  
Main Menu/Alarm Setting/Aux Output  
26. Initialization Menu  
Main Menu/Initialize  
AUX Output menu is to operate the camera’s peripheral  
devices such as lamps and sirens through the controller and  
switches as well as through network communications.  
Main Menu  
Power On Reset  
:
Main Menu  
Camera Setting  
Restarts the camera.  
Factory Default  
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Camera Setting  
:
On/Off  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Enables resetting the camera to its factory default settings.  
When the mode is selected, all custom data such as preset  
locations is deleted from the camera.  
Use this function if it is necessary to reset the settings of  
the camera.  
- Cancels or activates the Aux function.  
Time  
:
Enables setting up a duration for the Aux output when the  
Aux command is transmitted from the controller.A  
duration can be selected from a minimum of 1 second to a  
maximum of 60 minutes.  
Status  
Status  
Camera Default  
:
Alarm Setting  
This mode can be used if the camera module has been  
replaced and you want to keep the camera's existing  
settings for the new module.  
To do reset the camera, first replace the old module with a  
new camera module.When the replacement is properly  
installed, turn on the module, then execute this command.  
Initialize  
NO  
NO  
Alarm Enable  
Alarm Input  
Alarm Output  
Aux Output  
OFF  
Power On Reset  
COM  
COM  
Factory Default  
Camera Default  
Auto Refresh  
AUX Off  
AUX On  
OFF  
Auto Refresh  
:
Auto Track Default  
AUX Output  
Enables optimizing the status of the camera’s built-in  
electric circuits and components on a regular basis. (A  
regular operation can be scheduled.)  
On/Off  
Time  
OFF  
00 SEC  
This mode can be used to maintain and repair the current  
settings of the camera when anomalous operations occur:  
e.g.The camera happened to directly face a light source, or  
the settings have been canceled after the camera  
repeatedly rotated in all four directions for a long time to  
monitor a specific location.  
Notes  
•ꢀConnectingꢀtheꢀpowerꢀconnectorꢀandꢀGNDꢀincorrectlyꢀtoꢀtheꢀAuxꢀterminal’sꢀNOꢀandꢀCOMꢀ  
ports may cause a short circuit and fire, damaging the camera.  
•ꢀThemaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,andꢀ  
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s  
lifespan and damage it.  
The default setting is Off.  
- Off, 1~7 Days: Selecting Off disables Auto Refresh and but  
automatically executes it after 1~7 Days days has passed.  
action once the refresh is complete.  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
73  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Operating Your Camera  
Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a  
sequence action, the camera pauses the sequence action and performs an Auto Refresh, then  
resumes the sequence action once the refresh is complete.  
Status  
27. Status  
Main Menu/Status  
Auto Track Default  
:
Enables resetting the Auto Track settings.  
Displays the settings and version of the dome camera.  
Cam Model  
Main Menu  
Camera Setting  
:
Sequence Setting  
P/T Setting  
OSD Setting  
Alarm Setting  
Initialize  
Indicates the model name of the camera.  
Cam Version  
:
Indicates the software version of the camera.  
Dome Version  
:
Indicates the version of the camera control board.  
CON Protocol  
Status  
:
Indicates the status of the current protocol.  
Dome ID  
:
Camera Status  
Dome Camera ID  
Controller  
CAM MODEL  
= 37PC  
:
CAM VERSION = 2.3  
Indicates the settings of the current communications mode.  
Track Version  
DOME VERSION = 0.10  
CON PROTOCOL = SAMSUNG TW  
:
Indicates the Auto Track software version of the camera.  
DOME ID  
= 001  
CONTROLLER  
= Simplex-9600  
TRACK VERSION= 0.10  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
75  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Specification  
Product Specification  
Sens-up  
On/Off (Selectable limit ~ 256X )  
LOW/MEDIUM/HIGH/MANUAL/OFF  
ATW/INDOOR/OUTDOOR/AWC/MANUAL  
AUTO(NTSC:1/60~120,000sec, PAL:1/50~120,000sec)/MANUAL/A.FLK  
SPD-3700T  
SPD-3700  
SPD-3310  
SPD-2700  
Gain Control  
White Balance  
Electronic Shutter  
Serial Com.  
Protocol  
Alarm  
Digtal Flip  
Operating Temperature/  
Humidity  
Storage Temperature/  
Humidity  
Input Voltage  
Power Consumption  
External Dimensions  
(Ø×D)  
Imaging Device  
TV Standard  
Total Pixels  
1/4 inch, Super HAD color CCD  
NTSC / PAL  
NTSC:811(H) x 508(V) / PAL:795(H) x 596(V)  
NTSC:768(H) x 494(V) / PAL:752(H) x 582(V)  
2:1 Interlace  
RS-422/485  
Effective Pixels  
Samsung Techwin, Pelco-D, Pelco-P, Panasonic, Honeywell,AD,Vicon, Samsung Electronics  
Scanning System  
Synchronization  
Horizontal Scan Rate  
Vertical Scan Rate  
Horizontal Resolution  
4 In, 2 Out, 1 Aux  
ON/OFF  
Internal  
Internal/External(AC Line Lock)  
NTSC:15.734 KHz / PAL:15.625 KHz  
NTSC:59.94 Hz / PAL: 50 Hz  
-10 to +50 / 20% to 80% RH  
550 TV Line(Color)/680 TV Line(B/W)  
0.4 Lux @ F1.6 ( Color ), 0.001Lux @ F1.6 (Sens-up 256X)  
-20 to +60 / 20% to 95% RH  
Min. Illumination  
0.02 Lux @ F1.6 ( B/W )  
AC24V 10%  
Max. 13W  
S/N (Y Signal)  
Video Output  
50 dB  
Max. 15W  
CVBS:1.0Vp-p/75Ω  
33X (Optical),  
27X(Optical),  
12X(Digital)  
3.5~94.5mm  
(F1.6~2.9)  
Ø155×243.4mm  
2Kg  
Zoom Ratio  
37X (Optical),12X (Digital)  
12X (Digital)  
3.5~115.5mm  
(F1.6 ~3.6)  
Weight  
Focal Length  
3.5~129.5mm (F1.6 ~3.9)  
Min. Object Distance  
1.9m  
H:55.5°(Wide)  
~1.77°(Tele)  
V:42.5°(Wide)  
~1.33°(Tele)  
H:55.5°(Wide)  
~2.24°(Tele)  
V:42.5°(Wide)  
~1.79°(Tele)  
H:55.5°(Wide)~1.59°(Tele)  
V:42.5°(Wide)~1.19°(Tele)  
Angular Field  
of view  
Focus  
Zoom Speed  
IRIS  
AUTO / MANUAL / ONE-SHOT  
2.5sec  
AUTO/MANUAL  
Lens Initialization  
Auto Tracking  
Horizontal  
Built-In  
-
Built-In  
360° Endless  
Rotation Angle  
Horizontal  
Manual:0.024°/sec ~120°/sec, Preset 500°/sec  
Rotation Speed  
Vertical Rotation Angle  
Vertical Rotation Speed  
Preset Position  
Preset Accuracy  
Camera ID  
-5° ~ 185°  
Manual:0.024°/sec ~120°/sec, Preset 500°/sec  
255  
0.1°  
255  
Day & Night  
Backlight  
Motion Detection  
Stabilizer  
AUTO / COLOR / BW  
USER / HLC / OFF  
ON/OFF  
ON/OFF  
Privacy Mask  
SSNR  
ON/OFF (8 Areas)  
LOW/MEDIUM/HIGH/OFF  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
77  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECLARATION OF CONFORMITY  
MEMO  
Application of Council Directive(s)  
EMC-Directive 92/31 EEC and its amendments  
Manufacturer's Name  
Manufacturer's Address  
SAMSUNG TECHWIN CO., LTD  
SAMSUNG TECHWIN CO., LTD  
42,ꢀSUNGJU-DONGꢀCHANGWON-CITY,  
KYUNGNAM,ꢀKOREA,ꢀ641-716  
European Representative Name  
European Representative Address  
Equipment Type/Environment  
Model Name  
Dome Camera  
SPD-3700T/3700/3310/2700  
S8110001  
Beginning Serial NO.  
YearꢀofꢀManufactureꢀꢀ  
Conformance to  
2008.11.29  
EN 55022 : 2006  
EN 50130-4 : 2003  
We, the undersigned, hereby declare that the equipment specified above conforms  
to the above Directive(s).  
Manufacturer SAMSUNG TECHWIN CO., LTD  
Signature  
Legal Representative in Europe  
Signature  
FullꢀNameꢀꢀ  
Positionꢀꢀ  
Placeꢀ  
FullꢀNameꢀꢀ  
Positionꢀꢀ  
Placeꢀꢀ  
HANꢀSEUGꢀKIMꢀ  
QUALITYꢀCONTROLꢀMANAGERꢀꢀ  
CHANGWON,ꢀKOREAꢀ  
2008.11.29  
Date  
Date  
SPEED DOME CAMERA  
User’s Manual  
SPEED DOME CAMERA  
User’s Manual  
79  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Radio 22CH GMRS FRS User Guide
Radio Shack TV Antenna 15 1867 User Guide
RCA Flat Panel Television 37LA30RQ User Guide
Remington Hair Clippers SCC 100R User Guide
Rogue Audio Stereo Amplifier TEMPEST II User Guide
Samsung Clothes Dryer DV520 User Guide
Samsung Digital Camera Digimax 200 User Guide
Sanyo CRT Television DS13390, DS19390, DS25390 User Guide
Sanyo Security Camera VCC MC500P User Guide
Sears Lawn Mower 91725004 User Guide