Samsung Satellite Radio SADPCI 202 User Guide

SADPCI-202

Digital Satellite Receiver

Instruction manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety and Precautions:

Thank you for purchasing the new SAMSUNG digital satellite receiver. For your safety and proper

operation of your receiver, please take time reading this manual fully before installing and operating

the receiver.

Safety notice:

DANGER! HIGH VOLTAGE! RISK OF ELECTRIC SHOCK!

Lethal voltages are present inside the unit. Always unplug the receiver completely from mains outlet

before connecting or disconnecting anything.

No user-serviceable parts inside. Please refer all servicing to qualified service agents.

Never expose the unit to water, moisture, extreme cold or direct sunlight.

Slots are provided for proper ventilation for the unit, do not obstruct them.

Do not insert or drop small objects into the unit.

Install the unit in a well-ventilated location

Never cover the unit or operate the unit near any heat source.

It is advisable to unplug the unit from the mains, TV, and the satellite dish when a thunderstorm is

expected.

Cleaning your receiver

Always unplug the unit from mains before cleaning the unit.

Do not use solvents of any kind to clean the unit, only use a soft-dry cloth.

SAMSUNG reserves the right to change specifications without prior notice.

This manual only covers the version of software supplied with the receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories:

User Manual: 1

Batteries: 2

UHF TV cable: 1

Remote Control Unit: 1

RADIOTV SAT

INFO

ESC

SIGNALF

HELP

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connection:

Please unplug all unites from mains outlet before installation. Once all connections are made please

check again before connecting the equipment to the mains outlet.

The following shows a typical installation of a satellite receiver. If you require further assistance for the

installation of your satellite receiver, please contact your local distributor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel:

B C

A. Standby:

B. Menu:

To switch the receiver on / off.

To enter the main menu.

C. Volume +/-:

D. Exit:

E. Display:

To increase or decrease volume level.

To back step or exit from menu.

Displays channel mode and channel number (see below*).

F. Channel +/-:

To change channels or move cursor in menu.

* Display modes:

The current viewing mode is displayed by your receiver:

Mode:

Radio

Menu info bar:

Front panel LED display:

Channel Number

r + Channel No.

TV icon + Channel. No.

Radio icon + Channel No.

Heart icon + Channel No.

Favourites

F + Channel No.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel:

Please refer to the diagram above for all the connection possibilities of your receiver. Do not connect

the unit to the mains socket until all other connections have been made and checked.

IF Input:

Connect the cable from your dish to this connector.

Loop Out:

If you have a second satellite receiver, connect the second satellite receiver’ s

LNB input to this connector.

TV:

Connect your TV UHF input to this connector.

ANT:

Connect your TV antenna to this connector-only in

conjunction with TV UHF output.

TV SCART:

VCR SCART:

Video:

Use this connector to connect you TV to the receiver via a SCART cable.

Use this connector to connect you VCR to the receiver via a SCART cable.

Composite video output for connecting to a monitor etc.

0/12V:

0 or 12V output for external control switch.

Audio L/R:

S-Video Out:

RS232:

Audio outputs for connecting to an external stereo amplifier.

Additional output f or recording with a VCR / camcorder with S-ideo capability.

You can connect the receiver to a PC via this connector (advanced users only).

High-speed data port for connecting with a PC (advance users only).

IEEE 1284:

Once ALL the connections are made and CHECKED, you may connect the unit to the main

supply.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Unit:

To switch to the second

Soundtrack/ language

By-Pass SCART priority

VCR loop through

Display radio channel list

To display channel status or

current or next channel

information in EPG mode

RA TV LA

Display TV channel list

To mute the sound

To switch your receiver on from

stand by or off to stand by

VOL

C H

To change channels in view

mode, or to move cursor up or

down in menu mode

To change volume, or to move

cursor left, right in menu

To about setting or to back out or

of menu

To select menu option, or to

updated on entry

SIGN

HEL

Numeric Keys : Used to select

channels or enter programming

parameters

LANGSCANINDEXBLUE

Programme Guide :

To display the current and next

programme information

(if available)

POS

A/D

To edit or display the Favourite

channels list

Toggle signal meter

Function keys :

In normal viewing mode, F1 may

be used to recall the last viewed

channel

To Display the on-line help

messages when available

Additional functions will be

indicated in menus where

applicable

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Start:

After initialisation, the Language selection screen will be displayed.

By using the LEFT/RIGHT keys, you may select the

different menu languages available. Once you have

English

Select Menu Language

selected the desired menu language, press OK to

continue with set-up.

After selecting the menu language, the receiver will display the Channel Tuning Menu:

(Menu, Channel Setup, OK)

LNB

Preset

Satellite

Setup Satellite

Preset Entry:

Hotbird – 13.0E

Frequency

Sym. Rate

Polarity

11720

27500

Hor 18v

Move the cursor to highlight the “ Satellite” box and

use the LEFT/RIGHT keys to scroll through the pre-

stored satellites. For example, if your dish is aimed

at the Astra satellite, whenAstra is selected, you

should see both signal meters reading a good signal

level. The receiver will then prompt you to press OK

to start tuning to all the channels on Astra.

FEC

3/4

Snaigl Found

Signal

Data

Off

Bouquet

FTA

(See next page)

Note:

Network

Use

PIDs

to change Satellite

F2 Mode

F1 – Preset

1. If you wish to only tune to a specific Network or Bouquet of channels, move the cursor to highlight

the “Bouquet” box and use the LEFT/RIGHT keys to scroll through the pre-stored Bouquets. You

should now see both signal meters reading a good signal level and the receiver will prompt you to

press OK to start tuning all the channels from the selected Network or Bouquet.

2. If you only wish to download Free-to-Air channels, high-light the FTA box and turn the option to “on”.

Provided your dish is installed correctly and aligned to the relevant satellite, both the Signal and Data

bars should display a GREEN bar which denotes the following:

The first bar shows the actual satellite SIGNAL strength

You should see a GREEN bar showing your satellite signal is medium to good. If it is RED, this

normally indicates that either your dish/LNB set-up is not adequate for this satellite, or your dish is

not correctly aligned.

The second bar shows the quality of the DATA received

This GREEN bar indicates the DATA INTEGRITY of the signal received. If the bar is RED, this

indicates that the DATA received is unreliable. This could cause the picture to break up, or

disappear completely.

Note: If“No signal found” is displayed, check that the values entered are correct and are valid for

the satellite your dish is installed for. (Please also refer to the “Advanced Users” and “ Trouble

Shooting” section to check that your LNB settings are correct).

Manual Entry (see also “Advanced User Guide” ):

(See the “Advanced User Guide” section for more information on manual entry and other tuning

options other than Auto set-up.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Downloading Channels:

With a “ Signal Found” message displayed the signal meters in the Channel Tuning Menu,and

depending on whether you have selected a Satellite or Bouquet search.

Press the OK key to begin auto search (Satellite, Network or Bouquet).

A uto Channel Search

Astra 19.2E

TV channels

Radio channels

Sky 1

BBC1

CNN

NBC

Virgin Radio

ITN

Movies 1

Sky news

Searching 11.381 GHz …

The AUTO CHANNEL SEARCH screen will now be displayed:

Please wait for the receiver to process all the channels - this may take a few minutes. The time

required to tune in all the channels on the selected satellite depends on the number of channels

available. You may press the ESC key to stop auto tuning anytime.

All the channels found (TV and Radio) will be displayed in the two separate boxes provided in the

“Auto Channel Search” menu. Once all the channels are found, the “ Finished” message will be

displayed at the bottom of the menu indicating that the process has finished.

Now press the OK key to store the new channels.

You should now be able to view the first channel found by your receiver. The channel number, channel

information and the clock will be displayed at the top of the screen for a few seconds. You may recall

this information banner by pressing the INFO key on your handset.

Note: Some channels are scrambled - only channel information will be displayed.

You may now either go and view your downloaded channels or continue to download channels from

another bouquet or satellite.

uto

hannel

earch

TV channels

Radio channels

Searching 11.381 GHz

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing your channels:

There are several ways to access the stored channels:

Using the UP/DOWN keys on the remote handset to access the channels sequentially.

Using the numeric keys (0-9) by typing the channel number to access the channels directly.

Using the TV key on your handset to display the TV channel list. Use the UP/DOWN keys to

move the cursor to highlight the desired channel, then press OK to view that channel. You may

also use the LEFT/RIGHT keys to skip to the next or previous page of the channel list for quicker

scrolling.

Using the “ Favourite Channels Lis”t - You may add all your favourite TV and Radio channels

into the “ Favourite Channels Lis”t . Please see next section on instructions for using and editing

favourite channels.

Multi-satellite:

As you download channels from different satellites, your digital satellite receiver will store in dedicated

satellite groups. For more details please refer to the Advanced User Guide.

List by satellite:

Astra

19.2E

1 CNN

To access your channels, press the TV (or Radio) key:

2 Sky

3 Cartoon

4 TNT

5 CNBC

6 STAR TV1

7 MTV

Use

page

to change

To access the list of channels on a different satellite,

press F1 or F2 keys. Within each list you may use

the Up/Down, Left/Right keys to highlight the required

channel and press OK to select it.

Use

cursor

to move

Use OK to select

Press ESC to exit

8 VH-1

List in Alphabetical order:

Alternatively, from View mode you can list all the stored

channels in alphabetical order by pressing TV (or Radio)

twice in succession.

Canal +11

Canal +2

CNBC

CNN

Fashion

TV14

TV17

TV22

TV18

TV35

TV57

TV60

Use the Up/Down, Left/Right keys to highlight the

channels and press OK to select it. In alpha mode,

you can also use the F1/F2 keys to skip to the next

letter to save time.

TV54

Astra

19.2E

Note: At any time if you wish to return to your original cursor position, simply press the HELP

key on your remote.

Download from Www.Somanuals.com. All Manuals Search And Download.

Favourite Channels:

Before you can use the“ Favourite Channels List”, you must first add yourfavourite channels into the

favourites list. Please refer to the instructions below:

1 Discovery

♡

1. In view mode press the TV button to display the TV channel list.

2. You will now see the TV listing with your current channel highlighted.

3. Press the FAVOURITES key (heart shape) to add a favourite icon next to the channel name. This

channel will be added to the “Favourites List”. To add more channels to your “Favourites List” move

the cursor to highlight another channel and press

the FAVOURITES key. (if you press the FAVOURITES

key again it will remove thefavourite icon).

4. Press the OK key to store the favourite settings.

Canal +11

Canal +2

CNBC

CNN

Fashion

TV14

TV17

TV22

TV18

TV35

TV57

TV60

In view mode press the FAVOURITES key to display

the “ Favourite Channel List”.

TV54

To view yourfavourite channel, highlight it and press OK.

Astra

19.2E

Electronic programme guide (EPG):

This receiver is equipped with a unique dual EPG system which gives you two easy ways to view the

programme information (what’ s on now and what’s on next)! When transmitted by the broadcaster, the

EPG system can display a variety of programme information ranging from start and end times of a

programme to additional information about the programme itself. You can easily select and view a

programme on the EPG by highlighting it and pressing OK.

Select Menu Language

EPG Type

Default Audio Language

English

Full

You can also choose between a FULL or

CONDENSED version of the EPG, using

the “ Preferences” section under

the Installation Menu:

eng

Menu Transparency

TV Guide (Current Prog. Info.)

12:35

TV Guide (CurrentProg. Info.)

Channel Time:

Channel

1 of 124

Time :

Scheduled

CNN International

12:30 – 13:00

Regional financial report

12:35

CNN International

12:30 – 13:00

Eurosport

12:00 – 14:00

CART Indy Car series

Eurosport

12:00 – 14:00

12:30 – 13:00

12:30 – 12:45

12:30 – 13:45

^thRound Detroit GP

Sci-fi Channel

NBC Europe

Canal+ Swe

Sci-fi Channel

12:30 – 13:00

Wonder Woman

Regional financial report

NBC Europe

12:30 – 12:45

No Info.

Press EPG key for current/next prog. Info.

Use INFO key for more information

Press EPG key for current/next prog. Info.

Use INFO key for more information

Full EPG

Condensed EPG

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting different audio channels:

In digital satellite broadcasts, multiple audio languages can be simultaneously transmitted by the

programme provider.

Default audio setting:

The user can first select a default audio language via the“ Preferences” menu for the receiver. Once

the default audio language has been stored, all newly found TV/Radio channels will then be stored

with the selected default audio language.

Multi-Channel Audio:

The broadcasters may transmit more than one language for any channel. By pressing the “LANG” key

on the handset, the user can quickly find out what other languages are available for that channel. If the

left side column of the Audio Control menu shows a selection of different languages, the user can

select and store a new default language for that channel only - for that channel the receiver will always

return to the newly stored default language.

Sometimes two different languages are broadcasted with one language on the Left Audio Channel

(L) and a different language on the Right Audio Channel (R). When this is available, the “Audio

Channel” column of the “Audio Control” menu will display the available audio channels and the user

can then select either channel L or R for the desired language. Otherwise the default L+R setting

would have the two languages“ mixed” together and they will be heard at the same time.

From this menu, the left column indicates the

Language

Audio Channel

default languages available and the right column

indicates the available audio sub-channels. The

User may then move the cursor to the L or R sub-

channel and listen to decide whether the required

language is available.

eng

fra

dan

L+R

Notes:

The left column is the default language setting and this option is storable. If the user changes the

default language to another language, any new programmes which do not support the new default

language may become silent. When this happens, the receiver will display the Missing Audio icon on

the Information Banner, you can press the LANG key to select a different default language.

Missing Audio icon

Many broadcasters transmit multiple languages and programmes on a number of audio sub-channels.

With this menu the user can listen to any of the sub-channels by moving the cursor to highlight them

when available. The L and R audio sub-channels can vary from programme to programme so this is

not stored and will revert to L+R (Stereo) when you change channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information:

When viewing a programme, pressing the info key will display the information banner.

SAMSUNG

Note:

If the receiver was previously working on a channel and the“ No Signal” icon appears, you may have

one of the following problems:

Signal

Signal degraded heavily by poor weather

Channel no longer broadcasting and no carrier

was detected.

Data

Dish not aligned to the correct satellite

LNB power switched off in the menu

Faulty cable or LNB.

Use INFO key for diagnostic info.

The Signal and Data level meter:

Signal

Press the Signal key during view mode to display the signal

and data level for the current channel. Use this feature to

assist dish alignment or fault finding should there be a

reception problem.

Data

Video

Audio

Pic. Size:

544x576

25.00

4:3

Frames/Sec:

Asp. Ratio:

Bits/Sec:

Diagnostic Information:

For more information on the receiving signal,

press the INFO key to display the diagnostic

Screen:

15000000

Channel:

Emphasis:

Stereo

Off

The diagnostic screen displays detailed broadcast

information in real time. Press INFO key again to

return to the signal meters or ESC to return to the

Picture.

Sample Rate:

48.00kHz

Memory Status:

At any time you can check the memory status on you receiver.

The indicator shows the amount of receiver memory used by the stored channels.

Press:

All channels are stored in memory

Memory Used

Menu, Channel Setup, Memory Status :

Memory Used

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental Control:

To restrict unauthorised access to your receiver, two types of parental lock are provided:

Channel Lock:

This provides channel “ lock out” facility to restrict the access of adult programme material.

Menu Lock:

This will lock out the access of both the Channel Tuning and Installation menus from unauthorised

users. This will reinforce the Channel Lock as it also prevents other users from re-tuning channels that

are known to contain adult material.

P. Lock

To access the Parental Control menu:

Press Menu, Parental Lock, OK.

Enter Parental Lock PIN :

After the correct PIN (Personal Identification Number)

has been entered, the following menu will be displayed:

The default PIN is 0000. If you change your PIN, please

remember to keep it in a safe place.

Channel Lock:

OFF

Channel Lock

Menu Lock

This allows all channel locks to be either enabled or

disabled all at once. First use the Lock/Unlock option

to tag the individual channels to be locked, then

switch the Channel Lock option ON or OFF.

Lock/UnlockChannels

Change PIN

Menu Lock:

This option toggles the menu lock ON or OFF.

When menu lock is ON, you cannot access either

Channel Set-up or Installation menus without

entering a PIN.

Note: Channel Lock is only effective if

Installation/Channel Setup menus are also

locked with Menu Lock

Note:

Once the correct PIN has been entered to temporarily

disable a lock, this will remain“ unlocked” until the receiver has been switched to standby mode.

Canal +11 TV14

19.2E

Lock/Unlock Channels:

Highlight this option and press OK to display the

Channel Lock menu:-

Canal+2

CNBC

CNN

TV17

TV22

TV18

TV35

TV57

TV60

Fashion

Use UP/DOWN, LEFT/RIGHT to select the channels you

wish to lock. press F2 to turn the LOCK tag ON and OFF.

TV54

19.2E

Astra

Once you have tagged all the channels to be locked,

press ESC to return to the Parental Control menu and

make sure both Channel Lock and Menu Lock are

switched to ON.

F2 to Lock/Unlock

TV 124

Canal +

19.2E

CHANNEL LOCKED, F2 TO DISABLE LOCK

Press ESC twice to return to viewing mode and switch the

receiver to Stand-by and back to ON again.

SAMSUNG

Signa l

Now go to any Locked Channel (e.g. TNT) and

you will see that this is locked.

To Unlock, press F2 and enter the PIN number and press OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the PIN:

The factory default PIN is set to: 0000. At any time the user may change this PIN code by accessing

the “ Change PIN” menu:

OFF

Channel Lock

Menu Lock

OFF

Enter new PIN:

Confirm:

Lock/UnlockChannels

Change PIN

Note: Channel Lock is only effective if

Installation/Channel Setup menus are also

locked with Menu Lock

To change the PIN code, enter in the new PIN into the New PIN box and re-enter the same PIN again

in the Verify Box to confirm.

If the two PINs are not identical, the change will be aborted and the user will be asked to either re-

enter the new PIN or press ESC to abort the PIN change. If the PIN is accepted this will now be your

new PIN.

Don’ t forget your PIN number!

Please write down your PIN code below and keep in a safe place.

If you have forgotten your PIN code, please call anAuthorised Service Agent.

Factory PIN Code:

0 0 0 0

New PIN Code:

Please keep this section or this manual in a safe place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced users guide:

Tuning to different channel frequencies:

If the satellite you desire is not in the Preset listing, or you want to tune the receiver to a different set of

channels, please follow the instructions below:

To access the tuning menu, press the Menu key:

LNB

Preset

Setup Satellite

Satellite

Astra-19.2E

Move the cursor to Channel Setup and press OK.

Press OK on Tuning to access the Tuning Menu

Press F1 to enter the Manual Tuning Menu.

11720

Frequence

Sym. Rate

Polarity

27500

Hor 18v

3/4

FEC

By referring to your channel listings, enter the

Frequency,Symbol Rate (use 0-9 keys), Polarity

and FEC (Use LEFT/RIGHT keys) in the appro-

priate boxes for the channels you wish to tune to.

Signal

Data

Signal Found

FTA

Auto

Use

Off

Network

Bouquet

PIDs

Note:If you are using more than one LNB, be

sure to select the correct LNB (A, B,C or D)

for your tuning parameters.You can change

your LNB settings by highlighting the LNB

settings button and pressing OK (see page 22).

to change Satellite

F2 - Mode

F1 – Manual

You need to press OK to update the entered

parameters and thereceiver will try to tune to

the new settings.

LNB

Preset

Satellite

Setup Satellite

Hotbird– 13.0E

Frequence

Sym. Rate

Polarity

11720

27500

Hor 18v

3/4

If the message “Signal Found” is displayed and

both the Signal and Data bar graphs are GREEN,

you may now select a tuning method.

FEC

Signal

Signal Found

If the message “No Signal” is shown, please

check that your tuning parameters are correct

and amend if necessary.

Data

PIDs

FTA

Auto

Use

F1 – Manual

Off

Network

Bouquet

to change satellite

Check you LNB settings are correct (you can

access the LNB set-up menu by highlighting

the LNB Settings button and press OK; see

page 22 for LNB set-up information). If your

tuning and LNB settings are correct, your dish

may not be adequate to receive the signal or

out of alignment with the satellite.

F2 - Mode

Manual Tuning Menu

Provided you are receiving a good Signal and Data, you may now proceed with one of the three

download methods: Network, Bouquet, or Manual. You may highlight the FTA box and change the

option to “on” to download Free-to-Air channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning Modes:

Auto Tuning

From the select frequencies, the receiver will automatically search for all other frequencies within the

tuning range and downloads them automatically into the receiver. Once the channels have been

downloaded, all the TV and Radio channels will be displayed separately allowing the user to inspect

them and decide whether they are to be stored or aborted. This option is not available in Manual tuning

mode (F1).

Network and Bouquet Tuning

Within a digital broadcast transmission, many other network frequencies are provided to guide the

receiver to tune to other Networks. Network tuning enables the receiver to download other channels

from the same network. Use Bouquet tuning you only want to download channels from one channel

frequency group. Bouquet Tuning is used when only the channels from the desired frequency are to be

downloaded.

PID tuning

Hot Bird

Apart from the usual channel parameters (Frequency,

Symbol Rate, Polarity and FEC value), the broadcaster

must include additional information (known as Packet

Identifiers or PIDs) in their transmission to allow auto-

tuning to work properly.

Name

Audio

Video

Text

PID 0000

Ch type

PIDs in

Hex/Dec

PCR

PID 0000

Hex

In “ PID Tuning” you are required to enter the channel

name and three other parameters: Video PID, Audio

PID, PCR PID and Text PID (optional). These values

can either be in Decimal (ranging from 0 to 9) or Hexadecimal (ranging from 0 to 9 and A to F for each

digit).

After selecting from the Preset List, or Manually entering the basic channel parameters (Frequency,

Symbol Rate, Polarity and FEC value), move the cursor to highlight the Manual button and press OK to

start tuning.

Edit the Channel details by following the steps below :-

1. Use the UP, DOWN, LEFT/RIGHT keys, to move the cursor from one field to another.

2. Use the LEFT/RIGHT, F1 and F2 keys to enter the channel name.

3. Select the channel type whether it is a TV channel or a Radio channel.

4. Decide whether you would like to enter the PIDs in decimal or hexadecimal form.

5. Use the F1/ F2 and 0-9 keys to enter the PID values.

6. When you have finished and are ready to store and display that channel, press OK.

Note:

In order for manual tuning to be successful, the PCR PID must be entered. In many cases the PCR

PID is not published. Fortunately, in nearly all cases the PCR is the same as the Video PID or the

Audio PID or 8190 in decimal or 1FFE in hexadecimal.

The Teletext PID is optional and can be ignored when the value is unknown.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Satellite:

If your desired satellite position is not on the Preset List, you can manually edit an existing satellite or

add a new satellite name to the preset list.

To add a new satellite to your list, you must first enter the channel tuning mode:

Press Menu, Channel Setup, OK:

LNB

Preset

Setup Satellite

From the Channel tuning menu press F1

to enter manual tuner mode.

Satellite

Astra– 19.2E

Frequence

Sym. Rate

Polarity

11720

27500

Hor 18v

3/4

You will now see a Setup Satellite button on

the right hand side.

Signal

Data

FEC

Signal

FTA

Highlight the Setup Satellite button, press OK.

seau

Bouquet

Data

FTA

Auto

Use

Off

You will now see the Setup Satellite menu:

Network

Bouquet

PIDs

to change satellite

In the Setup Satellite menu you may either

press F1 to edit the highlighted satellite details,

or you may press F2 to add your own satellite

to the listing.

F1 – Manual

2 - Mode

LNB

Preset

Satellite

Setup Satellite

Hotbird-13.0E

In either case you will then be required to enter

the new parameters in the boxes provided:

Frequence

Sym. Rate

Polarity

11720

27500

Hor 18v

3/4

Satellite: Enter the satellite name

Position: Enter the satellite position in degrees,

then the decimal place and either E or W (East

or West).

FEC

Signal

Data

FTA

Off

Press OK when finished. Your new satellite will

be added to the Manual list on the screen.

Auto Network Bouquet PIDs

Use

F1 – Manual

to change satellite

Highlight the new satellite in the list and press

OK to return to the Channel tuning menu. You

will find your new satellite displayed in the

Satellite box.

F2 - Mode

Enter the transponder parameters and check

for signal availability.

ABC

123

Satellite

Position

Commence downloading your new channels.

Radio

Now any manual channels downloaded under

these parameters will be listed under the satellite

name you have entered.

Number of services

Astra

19.2 E

50.E

Sirius 1 / 2

Note:

F1 –Edit’deeails

F2 - Add

In the Manual Tuning Menu, you can use the F2

key to toggle between the receiver”s preset satellite

list and the manually added satellite list.

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing channels:

Should you wish to modify or view details of a particular channel, you may do so by using the Edit

Channel Details menu.

Please note that apart from editing the channel name, editing any of the channel parameters will cause

the channel to either be lost or changed (different audio/video). This menu is best used for checking

channel parameters downloaded from the broadcaster.

Name

To access the Edit Channel Details menu:

LNB

PIDs in

Hex/Dec

Hex

Press the MENU key, select Channel Setup,

then select Edit Channel Details and press OK.

Frequency

Sym Rate

Polarity

FEC

11278

27500

Ver

Audio PID

VideoPID

Text PID

0000

7/8

By using the UP/DOWN, LEFT/RIGHT, F1/F2

and the OK/ESC keys, you may move to any

field to edit the associated parameters (the

operation is similar to using the manual tuning

menu). Once all changes have been made,

Press OK to retune to these new parameters.

PCR PID

0000

Ch type

Note: It is important to identify whether the channel is TV or Radio so that the channel is stored

under the appropriate channel list (TV or Radio List).

Arrange:

The channel sort facility allows you to“drag and drop” channels to your preferred location. Within the

“Channel Setup” menu, you will find the Sort Channels option:

Move the cursor to highlight “Arrange” in the Channel Setup menu and press OK.

Use the TV or Radio keys to select the

listing you wish to sort.

TV Channels

Radio

list radio

Sky 1

CNN

NBC

Movies 1

Sky News

Discovery

channels

Use the UP/DOWN/LEFT/RIGHT keys

to move the cursor, highlight the channel

you wish to move and press OK to select

It.The selected channel now will move

with the cursor.

selectchannel

exit

ESC

Kiosk 2

NRK 1

Use the UP/DOWN/LEFT/RIGHT keys

to move the channel to the new location.

TV Channels

Press OK to “drop” the selected channel

into the new position or ESC to cancel

the change.

list radio

channels

Radio

Sky 1

CNN

NRK 1

selectchannel

Repeat for all other channels or press

ESC again to store the new settings and

Return to the previous menu.

NBC

Movies 1

Skynews

Discovery

exit

ESC

Kiosk 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Sort Free to Air Channels:

This function automatically separates the scrambled channels from the free-to-air channels by actually

checking each channel for video and audio. The user first decides whether to sort TV or Radio

channels (or both at the same time), and then selects whether to delete the scrambled channels or

simply move them to the end of the channel list.

Depending on the number of channels to be sorted, the time taken to complete the process will vary

and the progress bar will indicate progress in percentage.

To change the mode of operation, use the Left/Right or OK key.

Use F1 key to start the sorting progress and ESC to abort.

The Sort Unscrambled Channels Menu:

Mode

Move to end of list

Mode:

Select either to delete all scrambled channels

or move all scrambled channels to the end of

Scope

TV Channels

Channel

the channel list.

PPV Movie

Progress

Scope:

Select sort TV channels only, Radio channels

only, or sort both at the same time.

Available

Unavailable

Press F1 to proceed, ESC to abort.

Channel:

Displays the current channel being checked.

Progress:

Displays the sorting progress in percentage.

Available/Unavailable:

Displays a visual ratio between free channels to scrambled channels.

N.B.: Please note that channels with no signal lock will not be moved or deleted.

Mod

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting Channels:

You can choose one of the two following methods:-

Delete Channels -

you may select individual channels for deletion.

Clear All Channel Info - you may delete all channels in one operation.

1. Deleting Channels:

Move the cursor to highlight “ Delete Channels” in the Channel Setup menu and press OK.

By default TV channels are listed, press the RADIO

key to access the Radio list.

TV Channels

Radio

Info

List radio

channels

Play Channel

Toggle tag

All tags on

Delete tagged

channels

Use the UP/DOWN/LEFT/RIGHT keys to move

the cursor, highlight the channels you wish to

delete and press F1 to tag the channels to be

deleted. Notice that the tagged channels now

have an“ X” tag next to them (Pressing F1 will

remove the tag).

Sky 1

CNN

NBC

Movies 1

Sky news

Discovery

cancel

Kiosk 2

ESC

NRK 1

If you wish to tag all the channels, press F2.

(Pressing F2 again will remove all the tags)

Hotbird 13.0E

If you wish to preview the channel before tagging,

press Info. You can tag channels while in pre-

view mode - changing channels with UP/DOWN

keys, and tagging them with F1. Press the Info

key to return to the “Delete Channels” menu.

Once you have tagged all the unwanted

channels press OK to confirm.

TV 124

Canal +

19.2E

F1 – toggle delete ESC – exit

Delete

Press F2 key to confirm deletion or

press any Other key to return to

the Delete Channels menu.

SAMSUNG

Signal

2. Clear All Channel Info:

Only use this option if you would like to DELETE ALL CHANNELS stored in your receiver. All stored

channels in the receiver will be erased at the end of the following procedure:

From the Main Menu select Channel Setup and Delete.

You will be prompted with a warning screen:

Warning

Follow the on-screen messages to proceed

in deleting all your channels or to abort.

Are you sure you want to continue?

You will lose ALL channel information

Press OK to continue

Finally, press OK to confirm deletion of all

channel information.

any other key to exit

Note:

The above procedure will delete all stored channels in the receiver’ s memory. Any modifications made

to the receiver’s set-up (LNB settings, Parental Lock etc.) will NOT be affected. For instructions on

how to reset the receiver to factory condition please refer to the Reset to factory defaults section in this

manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation:

LNB:

The installation menu provides access to LNB settings and features. These can expand the receivers

capabilities as well ascustomising the receiver to your preference.

Press Menu and select Installation to access the Installation menu:

LNB

Low

Univ

09750

10600

Off

Help

Messages

High

DiSEqC

Tone

22k

12v

Save

LNB Power

DiSEqC 1.0

OFF

Repeats

Tone

OFF

The default LNB setting is as per the diagram above.

LNB Power:

This toggles the LNB power supply on and off. This option should be set to ON. With the LNB power

switched off, all control signals for LNB, switches and DiSEqC will also be disabled.

LNB A1 to D4:

Up to sixteen universal LNBs can beconntected to your digital receiver. For each LNB (A1 to D4) you

may specify the type and control method of the LNB.

L.O. Freq:

Enter the Local Oscillator Frequency in MHz of your LNB here. For LNBs with two L.O. frequencies,

enter the Low Band L.O. frequency in the Low column and the High Band L.O. frequency in the High

Column. (e.g. For a Universal LNB, the Low Band L.O. frequency is 9750 MHz and the High Band L.O.

Frequency is 10600 MHz).

Tone:

Your digital receiver is equipped with switch controls 12V, 22kHz tone, as well as DiSEqC 1.0

DiSEqC:

With the DiSEqC options switched on you can select between LNBs from A to D.

Note:

You may use these controls independently to select different LNBs, and in addition you can use either

in conjunction with DiSEqC switchs to increase the number of LNBs used. Up to maximum of sixteen

LNBs can be used.

Note: Universal LNBs uses 22kHz to switch between Low Band and High Band and therefore the

22kHz control column is automatically disabled when Univ is selected in the LNB column.

Save:

Highlight this button and press OK to store any changes made to this menu. If you exit by pressig

ESC your changes will not be saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR settings:

The TV/VCR menu contains various options that allow you to configure the receiver to suit your

system:

Press Menu, select Installation to access the TV/VCR Menu:

Standard (4:3)

TV Type

UHF Channel

Enable TV SCART RGB

Enable TV SCART S-Video

OFF

Enable VCR SCART S-Video

OFF

The following options are available:

TV Type:

Select between a standard aspect ratio TV (4:3) or Wide-screen (16:9) TV.

16:9 mode is only active when a programme is transmitted in 16:9 format.

With a modern 16:9 TV, the switch to 16:9 mode is automatic if connected via a full SCART.

With a modern 4:3 TV, 16:9 mode will produce a “Letter Box” format if connected via a full SCART.

UHF Channel:

Use this option to change the TV UHF modulator output channel. The default channel is CH38. If this

is already occupied by a local TV channel, VCR or you are experiencing picture interference, use this

option to re-tune your satellite receiver to a different UHF channel. Remember to re-tune your TV and

VCR to the new channel.

Enable TV SCART RGB:

When OFF, the TV SCART outputs composite video signal. If you have a RGB compatible TV,

switch this option to ON to enjoy better picture quality.

Enable TV SCART S-Video:

Select this option only if your TV is S-Video compatible.

Note: 1. If your TV is not compatible, a Black and White picture will result.

2. This option is NOT available if TV SCART is set to RGB.

Enable VCR SCART S-Video:

Select this option only if your VCR is S-Video compatible.

Note: 1. If your VCR is not compatible, a Black and White picture will result.

2. This option is NOT available if TV SCART is set to RGB.

TV T

Download from Www.Somanuals.com. All Manuals Search And Download.

Preferences:

This menu allows you to customise the receiver to suit your individual needs.

To access the Preferences menu: Press Menu, select system.

Select Menu Language:

You may change the default menu language.

The number of languages available depends

on the receiver’s software version.

Select Menu Language

EPG Type

Default Audio Language

English

Full

eng

Menu Transparency

EPG Type:

You can change the ElectronicProgramme

Guide format between FULL EPG or

CONDENSED EPG.

(See EPG section under Accessing Channels).

Default Audio Language:

You can select or change the default language for your programmes with this menu. When tuning for

new channels, the receiver will automatically search for the default language if available (See the

“Selecting Different Audio Channels” section).

Menu Transparency:

Use this feature to adjust the transparency of the receiver’ s menus.

Set local time:

The Digital Satellite receiver is equipped with an internal clock. The time is displayed on the channel

information banner and on the EPG so that you will never miss your favourite programme, wherever

the programmes are transmitted from!

Offset from GMT:

Enter the time difference between your local

time and GMT in this box.

Offset from GMT

Local Time:

Some broadcasters may not transmit the time

together with their programme content. In this

case you may need to enter the local time of

your country here (Note: This is a 24hr clock).

Local time

System Information:

The system information option on the Installation menu above displays software version numbers.

This can be used to identify whether there is a newer version of software available.

As digital receiver technology is constantly

improving, newer and better versions of

software will become available in future to

further enhance your receiver. New software

updates will be available to your dealer and

On the Internet.

SID x.x

x.xx.xx

Application

dd/mm/yyyy

Boot

2.0

1.x

F P

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset to factory defaults:

The Reset To Factory Defaults option is provided to enable the user to completely reset the receiver.

Unlike the Clear All Channel Information option which allows the user to clear only the channel list, the

Reset To Factory Defaults option will clear all changes made by the user, including Installation,

Channel Setup and Parental Control changes.

Warning

Reset To Factory Defaults menu:

This will Reset All settings to default values

After pressing OK the following menu

Press F2 to continue, any other key to exit

will be displayed:

Stored settings, including LNB and TV/VCR configurations,

parental/installation access control and preferences

This process has been designed to be

lengthy to minimise accidental resetting

of the receiver to it”s the default condition.

Press F2 to proceed to the next step,

any other key will return you back to

Warning

the installation menu.

Are you sure you want to continue?

All stored settings will be reset to default values

You are asked to confirm this once more.

Pressing OK at this point will enable the

Press OK to continue

any other key to exit

“Reset to Factory Default” function.

Stored settings, including LNB and TV/VCR configurations,

parental/installation access control and preferences

Pressing any other key will return you

back to the installation menu.

Beyond this point, all stored settings

(including LNB, TV/VCR configurations,

parental/installation access control, and

Warning

preferences) will be lost.

Stored settings reset to default values

This final screen confirms the receiver

Press any key to exit

has been reset to factory defaults.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble shooting:

If you suspect there is a fault with your receiver, please check the following trouble shooting guide

before calling an authorised service agent.

Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the

receiver may result in fatal electric shock and will invalidate your warranty.

Symptom:

Possible cause:

No receiver display

Check that the receiver is plugged in and

there is power at the mains socket.

Receiver is ON, but no picture or sound

Check that your TV is switched on

Receiver is on, no picture or sound except

menus

Channel scrambled.

Check tuning and set-up

Check Signal and Data levels.

Dish moved or LNB is faulty.

Interference on picture, sound OK

Local TV interference, tune the

output to another channel, or connect to

TV via SCART or phonos.

Interference on picture, noisy audio

Receiver not responding to remote

Press Signal key and check if Signal and

Data levels are good enough.

Check remote batteries and that the

receiver IR sensor is not covered

(marked IR on the front panel).

Download from Www.Somanuals.com. All Manuals Search And Download.

Analogue option

The digital satellite receiver analogue option is an advanced analogue receiver module specially

designed to be used with the digital satellite receiver.

With the capacity for 600 channels, single or twin input Low-Threshold tuner* (3.5dB max.), dual IF

bandwidth tuner* and high sensitivity PLL audio demodulation circuitry, the analogue option will

provide excellent reception capability even under very poor signal conditions. To cope with the many

different scrambling methods used by broadcasters, the analogue option is fully PAL, MAC and

Canal+ decoder compatible with fully programmable audio and video loop-through. Apart from

employing a high sensitivity PLL demodulation circuit, the audio circuitry in this module is also fully

featured: Independent Left/Right tuning with 4 selectable audio sub-carrier bandwidths (130, 180, 280,

and 500kHz), and 50uS, 75uS, J17 audio de-emphasis, and PANDA compatible dynamic noise

reduction system.

In order to save you time during installation, the unit is pre-programmed with the most popular

channels, from the most popular satellites together with automatic video frequency scan, selectable

LNB local oscillators setting 22kHz tone and DiSEqC support. The most commonly used audio

settings are also pre-stored in the first 25 audio presets (50 in total), with the remainder 25 presets

being fullycustomisable by the user.

*Optional

system installation:

In addition to the connectors shown on page 4 in the main manual, you will find extra LNB inputs and a

decoder SCART socket used by the analogue module:

For installations with a single LNB feed, connect the cable from the LNB to the main IF input. Connect

the small IF loop cable (supplied) between the Loop Out connector to the Analogue IF Input connector.

For installations with two independent LNB feeds, connect the respective LNB cables to the corre-

sponding LNB IF inputs, the Loop cable will not be required in this case.

decoder SCART:

Connect your decoder to the DECODER SCART connector via a SCART cable.

Note:

Within the decoder SCART there are two pins (pin 10 = SCL and pin 12 = SDA) reserved for analogue

channel data download which your installer mayuse to download new channel presets from his

receiver directly into your receiver. Please refer to your dealer for download information.

Download from Www.Somanuals.com. All Manuals Search And Download.

using the analogue option

The built-in analogue option enables you to receive analogue satellite transmission.

Your analogue receiver has been pre-programmed with the most popular satellite channels. Refer the

Analogue Channel List for full details.

To set up the analogue receiver (assuming your TV has already been tuned to your satellite receiver,

otherwise refer to instructions in page 6 of the main manual)

1. Unplug the receiver from the mains outlet.

2. Connect the supplied RF loop cable between the RF Loop out socket and the Analogue RF IN

socket. (Alternatively, you can connect your dish directly to the Analogue IN socket.)

3. Re-connect your receiver to the mains outlet and switch your receiver on.

4. Follow the instructions on page 6 in the main manual and tune your TV to the receiver.

5. Press the Analogue button to switch to analogue receiver mode.

You should now see a picture or a blue screen with a channel number.

INDEX

001

002

003

004 ALGTV

005 IRAQ

006 QATTV

ALMATV

ABUTV

KUMAZT

ARAB2A/3A

(ç è êé , OK , ESC )

Refer to your channel list and enter the channel number for the satellite your dish is set up to receive.

If no picture is seen, please your analogue option settings as described below:

on-screen menu system:

Pressing the Menu key will display the Video, Audio and System menus one after another.

Press ESC at any time to exit the menu system.

TV Picture

Video Menu

Audio Menu

System Menu

DiSEqC Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Video Menu:

CH Name:

Displays channel name. To change the channel name, move the

cursor by using Left/Right key. Then you can change the channel

name by using Up/Down key.

VIDEO

P001

CH NAME

SAT01

FREQUENCY

POLARITY

SKEW

BANDWIDTH

DEVIATION

LT LEVEL

ALMATV

ARABSA 2A,3A

11.823MHZ

VER1

-45

27MHZ

SAT:

Displays the satellite group the current channel belongs to. You can

change the channel/satellite assignment by using the Left/Right keys.

Frequency:

Displays the channel frequency. You can change the frequency by

using the Left/Right keys or 0-9 keys for direct entry. Press F1 key

and hold the Left or Right key for 3 seconds to start auto video

frequency scan.

Polarity:

The polarity setting.

UP/DN, LR, 0-9, OK, ESC, MEN

Skew:

Optional polariser control (up to 16 different configurations).

Note: Only on models fitted with the polariser control option

Bandwidth (option):

The selected IF bandwidth (default 27MHz).

Deviation (1-4):

Controls the video level (brightness) in four steps.

LT Level (option):

Where applicable, you can adjust the threshold (sensitivity) of your

receiver under weak signal conditions (32 steps).

Note:

Use OK key to store changes and ESC to exit menus.

You can use the auxiliary Left/Right keys to change channels whilst

in menu mode allowing quick changes to the settings of other

channels.

2. Audio Menu:

Audio No:

AUDIO

FREQ-L

FREQ-R

MODE

BANDWIDTH

DEMEMPHASIS

50US

P001

Numbers 1-25 are factory pre-set audio sub-carrier frequencies

and 26-50 are user definable pre-sets. For complete audio preset

list, refer to the table in appendix 2.

Freq-L:

Displays the Left channel audio sub-carrier frequency.

Freq-R:

Displays the Right channel audio sub-carrier frequency.

Mode:

Selects between STEREO and MONO audio format.

6.60MHZ

MONO

280KHZ

50US

Bandwidth:

UP/DN, LR, 0-9, OK, ESC, MEN

Displays the selected IF bandwidth setting (selectable between

130/180/280/500KHz).

De emphasis:

Displays the selected de-emphasis (50uS/75uS/J17/DNR)

ALMATV

P001

DDINT

P001

Note:

Only audio numbers 26-50 are user configurable.

Note: Radio Key

Radio channels are usually transmitted alongside video channels,

use the RADIO key to enable the blue screen. Should you wish to

block out the pictures press STORE to store this function to the

selected channel.

Radio

Download from Www.Somanuals.com. All Manuals Search And Download.

3. System Menu

LNB INPUT:

Select upto eight LNB settings for your analogue system, A1 to A4,

SYSTEM

P001

B1 to B4. You can assign different LNB parameters (local oscillator

frequency, LNB power, 22KHz, 12V and DiSEqC control) for each

LNB setting.

LNB INPUT

LOCAL OSC.

LNB PWR

22KHz

0/12V

DECODER

COPY

UNI-HI

14V

OFF

For the selected input set the following:

LOCAL OSC:

Select the appropriate LNB local oscillator frequency.

You can select from 5.150, 9.750, 10.000, 10.750, 11.000, 11.475,

Universal Low Band, Universal High Band, and a variable setting

(between 9.100 to 14.000GHz).

OFF

001->001

UP/DN, LR, 0-9, OK, ESC, MEN

LNB PWR:

Select the LNB power supply. You can select from 14V, 18V and

V/H for Marconi type LNBs including Universal LNBs.

22KHz:

You can select 22KHz ON/OFF to control an external tone switch.

Note: When using a Universal LNB, 22KHz will be used to switch

the LNB and therefore 22KHz will be set to AUTO .

0/12V:

To control an additional 12 volt accessory switch.

Decoder:

The decoder status; from here you can select the type of decoder

de-emphasis required for your decoder.

(PAL,MAC,CLAMP,CANAL+)

DISEQC

P001

COPY:

To copy the settings from exsisting channel’ s setting to new

Channel’ s one directly.

SATPOSITION

SWITCHOPTION

DISEQC

OFF

4. DiSEqC Menu:

UP/DN, LEFT/RIGHT, OK, ESC

SAT POSITION:

Use to select between position A or B of a DiSEqC switch.

SWITCH OPTION:

Use to select between option A or B of a DiSEqC switch.

Note:

The DiSEqC function is enabled in the Installation menu.

DiSEqC:

Turns the DiSEqC control function ON or OFF. Switch this option

ON when you are using DiSEqC controlled equipment.

EPG Key:

Pressing the EPG key in analogue mode will display the Channel

Lock Menu.

CH LOCK

P001

MENULOCK

CHLOCK

PASSWORD

0000

Menu Lock:

You can set the menu lock NO and YES with this option. With

menu lock YES, the user must enter a password before any of the

programming menus are displayed.

Channel Lock:

To lock the current channel from unauthorised access, enter the

password to switch the channel lock from NOto YES.

(The factory password is 0000. To change the password, see the

Installation menu).

UP/DN, LR, 0-9, OK, ESC, MEN

Note: the Channel lock is ineffective unless the receiver’ s menus

are also locked. This prevents the unauthorised user from re-

tuning the restricted channel onto a different channel. To enable

menu lock, see the Installation menu.

Password:

Enter your password for your channel and menu locks. The default

password is 0000.

Download from Www.Somanuals.com. All Manuals Search And Download.

Favourite Key:

FAVOURTITE CHANNEL

123

Press the favourite key to display the Favourite Menu (Up to 40

favourite channels can be stored):

000

By using the Up/Down, Left/Right keys to move the cursor to

select a favourite channel number.

Now, either press OK to view the selected favourite channel, or

press the favourite key again to store the current channel as a

favourite channel.

UP/DN, LF/RIG, OK, ESC, FAV

Press ESC to exit from the favourite menu.

Other keys:

Use this key to initialise video frequency SCAN mode. When this key is pressed you will see a flashing

frequency. Use the analogue Left/Right keys in view mode or the Left/Right cursor key in program

mode to start scanning up or down the frequency range.

In view mode:

In menu mode:

Press F1 for SCAN mode.

Use the above Left/Right keys for

SCAN direction.

Move cursor to Frequency.

Press F1 for SCAN mode

Use the above Left/Right keys for

Note:

SCAN direction.

All new channels found by SCAN in view mode cannot be stored. You may only store them whilst in program menu.

F2:

You can use this key to enable or disable the BLUE background screen to aid tuning. Under poor signal conditions

the BLUE background will automatically come on to blank the screen, you may then use the F2 key to disable the

BLUE screen.

Lang:

Depending on your version of software, you can choose from f ivedifferent on-screen languages.

Analogue Left/Right:

In menu mode, you can change channels sequentially with the Analogue Left/Right keys. This is useful when you

need to change similar programming parameters for a range of channels without the need to exit from menu mode.

Analogue:

You can use the Analogue key at any time to toggle between the analogue and digital receiving mode of you receiver.

Download from Www.Somanuals.com. All Manuals Search And Download.

positioner model:

For models fitted with the integrated positioner module, refer to the following instructions for positioner

setup (assuming your dish has already been correctly setup):

At the back of the receiver you will find eight connectors provided for the dish actuator -

M1, M2, SENS, GND:

From your actuator motor you will find four wires– two thick and two thin wires. Connect the two thick

motor wires to M1 and M2, the two thin sensor wires to SENS and GND.

0/12V, GND:

Where applicable, connect a 0/12V LNB switch to these two connectors.

+5V, PULSE, GND:

Where applicable, connect a mechanical polariser to these three connectors.

Positioner setup:

With the receiver in analogue mode, press the

INFO/POS key to enter the positioner menu:

SAT POSITION

SAT No:

Select between 1-64 satellite positions.

SAT Name:

SAT NO

SAT NAME

ARAB 2A,3A

5000

0001

9999

Displays the satellite name. You may move the cursor

into the name field to edit the satellite name.

SAT STORED:

When SAT STORED = NO, all channels with the same

satellite name will be assigned to this satellite position.

DISH POSITION:

SAT STORED

DISH POSI (----)

EAST LIMIT

WEST LIMIT

REALIGN

CLEAR LIMITS

Displays the current dish position.

EAST LIMIT:

UP/DN, LEFT/RIGHT, OK, ESC

You may store the current dish position as the East limits

by moving the cursor here and press STORE.

WEST LIMIT:

You may store the current dish position as the West

limits by moving the cursor here and press STORE.

REALIGN:

If for any reason your dish is out of alignment with the

satellites, use this function to realign all satellites in one

operation instead of realigning the satellites individually.

1. First select a satellite you wish to realign as

reference.

2. Move the cursor to DISH POSITION

3. Move the dish East or West to relocate the

reference satellite.

4. Move the cursor to REALIGN and press STORE

5. Now all other satellite positions will be realigned

with respect to the reference satellite.

Download from Www.Somanuals.com. All Manuals Search And Download.

You may now begin to setup thepositioner:

Confirm the dish actuator is correctly installed by moving the cursor to DISH POS and then press the

Left/Right keys to move the dish east and west (usually Left key for East and Right key for West). You

should see the counter counting up and down (If your dish moves in opposite direction to the

East/West keys, reverse the wires connected to M1 and M2).

If the dish only moves a little and DISH POS counter does not change its values, an ERROR message

will be displayed. In this case check that the two thin wires from the dish motor are correctly connected

to Pulse and GND. If you are experiencing problems after checking all connections to both the receiver

and the dish actuator, consult your installer.

With the dish motor responding correctly, set the East and West limits to prevent over-driving your

positioner motor:

1. Move the cursor to either East or West direction until the ERROR message appears.

2. Back up the dish by about 10 counts.

3. Move the cursor to either East or West Limit and press store to store the East or West Limit.

4. Repeat the same for the other limit.

5. Move the dish towards each limit in turn to ensure that the dish automatically stops when the

corresponding limits have been reached.

6. Press Esc to return to view mode.

Locating satellites:

1. By referring to the channel list at the end of this manual, enter the channel number assigned to a

satellite you wish to locate.

2. Press the ESC/POS key to enter the positioner menu.

3. Move the dish until the correct channel is found.

4. Move the cursor to SAT STORED and change the setting from NO to YES and press store.

5. All the channels assigned to that SATELLITE NAME will now be stored to that dish position.

6. Repeat the steps above to locate other satellites of your choice.

New satellites:

For satellites not listed to the pre-programmed list, you may either use the SPARE channels provided

in the channel listing or rename an unused satellite to free the channels previously assigned to that

satellite.

To add more channels to a satellite channel group:

1. Select a spare channel and press MENU to enter the VIDEO menu.

2. Use the Left/Right keys to change the satellite name to the appropriate satellite.

3. Press STORE to assign that channel to the newly defined satellite position.

4. Repeat the above for other satellite/channels.

To view the channels:

Enter the channel number in view mode and the dish will automatically move to the corresponding

satellite. If you have incorrectly entered a channel number not assigned to any satellites, the message

NOT ON SAT will be displayed.

To select a satellite directly:

Press the INDEX/HELP key to display the

satellite INDEX menu.

INDEX

001

002

Press the INDEX/HELP key again to

toggle between page 1 and page 2 of the

satellite INDEX.

Move the cursor to the desired satellite

name and press OK to move the dish to

the selected satellite (If the selected sat-

ellite has not been stored, the receiver

will not respond).

ALMATV

ABUTV

KUMAZT

ARAB2A/3A

003

004 ALGTV

005 IRAQ

006 QATTV

(

ç è êé , OK , ESC )

4. To CANCEL the satellite INDEX menu

without selecting a satellite, press ESC.

Example

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

26.0 E

SATELLITE

FREQ

POL

BAND

AUDIO

DE-EMP

ARABSAT 2A/3A

ALMANAR TV

ABU DHABI TV

KUWAIT

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

030

031

032

033

034

035

036

037

038

039

040

041

042

043

044

045

046

047

048

049

050

11.823

11.835

11.859

11.900

11.938

11.977

12.521

12.536

12.578

12.661

12.685

12.700

12.720

12.735

11.835

11.859

11.900

11.938

12.521

12.578

12.661

12.720

3.720

6.60

7.20

7.40

7.92

7.02

7.20

7.38

7.56

7.02

7.20

7.38

7.00

7.02

7.38

7.20

7.92

7.20

6.60

6.65

6.60

5.80

6.60

50uS

DNR

50uS

DNR

50uS

DNR

50uS

ALGERIAN TV

IRAQ

ANN

QATAR TV

PSC

JORDAN

SAUDI 1

IQRA

JSC

SAUDI CH 2

INN

IMARAT FM

ARABIC

ARABIC CLASSICS

FM 99.7

RTA CH 1

RTA CH 2

RTA CH 3

EL BAHDJA

AL IRAQ

ISA

IRAQ INT

QATAR RADIO

RADIO AMMAN

AFS

V.O.K 1

AL QURAN AL KARIM

V.O.K 1

SHARJAH TV

LBC SAT

3.741

ESC 1

3.761

ART

3.782

NILE TV INT

BAHRAIN TV

CNN

3.802

3.823

3.843

FUTURE INT

ORBIT PROMO

SUDAN TV

SAUDI CH 1

TV 5 ORIENT

SAUDI CH 2

IRATES

3.864

3.884

3.905

3.925

3.946

3.968

3.989

ABU DHABI

DUBAI EDTV

SYRIA

4.044

4.060

4.085

MBC

4.102

JSC

4.123

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

OMAN TV

FREQ

POL

BAND

AUDIO

DE-EMP

051

052

053

054

055

056

057

058

059

060

061

062

063

064

065

066

067

068

069

070

071

072

073

074

075

4.140

4.167

4.180

3.782

3.823

3.843

3.864

3.905

3.925

3.946

3.968

3.989

4.044

4.060

4.085

4.102

4.123

4.140

4.167

4.180

6.60

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

KUWAIT

YEN TV

6.60

ART 5

7.02

BAHRAIN

CNN RADIO

EL SHARQ

OMDURMAN

V.O.K.1

7.00

6.30/6.48

7.56

7.20

AL-QURAN

MONTE CARLO

V.O.K.2

7.92

6.20

7.20

CHANNEL 4

IMARAT

7.20

R.DUBAI

DUBAI FM

SYRIAN RADIO

MBC FM

QATAR RADIO

RADIO OMAN

OMAN FM

ARABIC

7.20

7.74

7.56

7.38/7.56

7.00

7.20

7.74

5.80

ARABIC CLASSIC

YEMEN RADIO

ADEN RADIO

NILESAT 101/102

FEED

7.40

7.20

7.92

7.0W

076

077

11.919

11.977

6.60

50uS

JSC

19.2E

078

ASTRA 1A~1H

ARTE

10.714

10.729

10.744

10.759

10.773

10.803

10.818

10.832

10.847

10.862

10.891

10.906

10.921

10.936

10.964

10.979

10.994

11.009

11.023

11.038

11.053

11.068

7.02/7.20

DNR

079

080

081

082

083

084

085

086

087

088

089

090

091

092

093

094

095

096

097

098

099

CNBC

ANIMAL PLANET

QVC

JSTV

N24

TV TRAVEL

HORIZONS

B.TV

S.E.S

SWR

HOT

CHANNEL 5

TM3

ZDF

LIVING

TRAVEL

PHOENIX

CARTOON

QVC

WDR

FERNSEHEN

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

DISCOVERY

FREQ

POL

BAND

AUDIO

DE-EMP

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

11.082

11.097

11.112

11.127

11.141

11.156

11.171

11.186

11.214

11.229

11.244

11.259

11.273

11.288

11.303

11.318

11.332

11.347

11.364

11.377

11.391

11.406

11.421

11.436

11.464

11.479

11.494

11.509

11.523

11.538

11.553

11.568

11.582

11.597

11.612

11.627

11.641

11.656

11.671

11.686

10.803

10.891

10.906

10.979

10.994

11.009

11.038

7.02/7.20

7.38/7.56

7.38

DNR

BRAVO

MDR

VIVA

BAYERISCHES

NIKELODEON

SKY SPORTS 2

SWR

RTL 2

RTL

SHOP AMERICA

EUROSPORT

VOX

SAT1

FOX KIDS

SKY ONE

KABEL 1

3 SAT

BLOOMBERG

SKY NEWS

SUPER RTL

PRO 7

MTV

SKY MOVIAX

PREMIERE

SKY PRIER

ARD

SKY SPORTS 1

DSF

VH-1

UK GOLD

SCI-FI

N 3

DISNEY

MTV

CNN

N-TV

ORB

PRIVATE BLUE

BR ALPHA

EVIVA

DOM RADIO

ERF 1

ERF 2

7.56/7.74

7.38/7.56

7.74/7.92

7.38/7.56

7.74/7.92

7.38/7.56

7.38

BBC R1

BBC R3

R CAROLINE

EWTN

WDR 5

ERF 1

ERF 2

7.56

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

TWR

FREQ

POL

BAND

AUDIO

DE-EMP

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

11.038

11.053

11.112

11.127

11.156

11.214

11.229

11.244

11.273

11.288

11.218

11.332

11.347

11.377

11.391

11.406

11.421

11.464

11.479

11.494

11.523

11.538

11.553

11.582

11.612

11.627

11.641

11.656

11.671

7.74

7.38/7.56

7.74/7.92

7.38/7.56

7.74

DNR

50uS

DNR

WDR 2

EINS LIVE

MDR

IC R1

IC R2

7.92

RFI

7.38

JAM FM

DW 1

7.38/7.56

7.74

DW 3

DW 4

7.92

TAMIL

7.38

ROCK

7.56

RTL

7.38/7.56

7.74/7.92

7.74

KLASSIK

IC R 1

IC R 2

7.92

SKY RADIO

BYERN

DEUTSCH

VIRGIN

RTL

7.38/7.56

7.74/7.92

7.38/7.56

7.74/7.92

7.38

HOREB

SUNSHINE

SBN

7.74/7.92

7.38

N-JOY

7.38/7.56

7.38

SUNRISE

TAMIL

7.56

SWR 3

100.6

7.38/7.56

7.74/7.92

7.38/7.56

7.38

MELODIE

WRN 1

RTE 1

7.56

NPR

7.74

BBCWORLD

BBC R4

BBC R2

BBC R5

NDR 2

7.38

7.56

7.74

7.92

7.38/7.56

7.74/7.92

7.38

NDR 4

WRN

CNN

7.92

P.O.S

7.56

7.38

WBBR

7.38

7.56

13.0E

HOT BIRD 1/2/3/4/5

DUNA TV

MEDYA TV

ANN

197

198

199

200

10.815

10.853

10.949

10.974

7.02/7.20

6.60

DNR

50uS

DNR

50uS

7.02

TRT-INT

6.65

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

2SATELLITE

LA CINQ

FREQ

POL

BAND

AUDIO

DE-EMP

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

11.079

11.114

11.163

11.178

11.224

11.322

11.348

11.363

11.390

11.408

11.431

11.446

11.474

11.489

11.516

11.531

11.538

11.566

11.586

11.727

11.746

11.785

12.131

12.284

10.815

10.853

10.949

10.974

11.114

11.148

11.163

11.224

11.322

7.02/7.20

6.60

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

50Us

DNR

50uS

DNR

50uS

DNR

50uS

DNR

50uS

DNR

BBCWORLD

DEUTSCHE

VIVA 2

TVE INT

TV 5 EUROPE

TV 4 POL

RAI UNO

6.60

7.02/7.20

6.65

EUROSOPORT

CANAL +

7.02/7.20

6.60

POLSAT

RAI DUE

7.02/7.20

6.60

TV POLONIA

RTL 7

CANAL +

RAI TRE

7.02/7.20

6.60

123 SAT

TBN EUROPE

69 X TV

RTP INT

RADIO DUE

TVE INT

7.02

6.60

7.02/7.20

6.65

ERT SAT

KOSSUTH

RADIO BU

PETOFI R

MAGYAR R

RADIO SW

RCI-RA

6.60

7.02/7.20

6.60

6.65

6.60

WRN ISRA

MUSIC

6.60

TRT FM

6.60

VOICE OF

BBCWORLD

JAM FM

6.60

6.65

RADIO ME

DEUTSCHE

RADIO FIN

DEUTSCHE

RNE

6.65

7.74

7.92

8.10/8.28

7.38

REE

7.56

FRANCE INF

FRANCE INT

FRANCE C

7.20

7.38

7.56

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATEELLITE

RADIO MC

FREQ

POL

BAND

AUDIO

DE-EMP

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

11.322

11.363

11.408

11.431

11.446

11.474

11.516

11.727

11.785

12.131

7.92

7.38

DNR

50uS

DNR

50uS

DNR

RADIO UNO

RADIO TRE

R. ITA

7.56

7.38/7.56

7.74

R. MANA

RMF FM

7.02/7.20

7.38

RADIO DUE

RAI INT

7.56

GR PARLA

POLSKIE

7.74

7.38

7.56

7.74

MARYJA

7.92

R WAWA

RDP INT

RDP ANT

RDP TIMOR

EURO SPOT

RNE

7.38/7.56

7.02

7.20

7.56

8.10/8.28

7.02

RNE

7.20

RNE

7.38/7.56

7.74/7.92

RNE

BARTOK R

ARABSAT 2B

RTM 1

30.5E

275

276

277

278

279

280

281

282

283

284

285

3.876

3.918

3.968

3.991

4.044

4.058

4.080

4.099

4.126

4.140

4.167

6.65

6.60

50uS

MAURITANIE

ASBU FEEDS

FEED

RTD

FEED

LYBYA TV

16E

EUTELASAT 2F3

RTM 1

286

287

288

289

290

291

292

293

294

295

296

297

298

299

10.972

10.987

11.080

11.095

11.146

11.178

11.554

11.575

11.596

11.617

11.658

11.163

12.524

12.538

6.60

6.65

50uS

DNR

50uS

HRT CROATIA

AL-JAZEERA CH

ALGERIAN TV

NILE TV INT’ L

EGYPTSAT CH

ART EUROPE

TV SHQIPTAR

DUNA 7

7.02/7.20

6.65

6.60

6.65

6.60

LIBYAN TV

6.60

TV7 TUNISIE

TV EUROTICA

BT FEED

6.60

6.65

6.60

SPARE

6.60

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

FREQ

POL

BAND

AUDIO

DE-EMP

EUTELSAT 2F4

EBU FEED

PIK 1 CYPRUS

EBU SPORTS

PAS 4/7

300

301

302

303

304

305

306

307

10.972

10.987

11.009

11.058

11.080

11.095

11.146

11.163

6.60

50uS

J17

50uS

68.5E

308

SIMA-YEH

11.170

6.60

50uS

MOGHAVAT

309

310

311

312

313

314

315

316

317

318

IRANIAN EXIL

12.169

12.545

12.604

12.606

12.664

12.698

12.725

3.864

6.60

6.80

6.60

50uS

SABC 1

FEED

NHK LONDON

SABC 3

SABC 2

FEED

BBCWORLD

MAHAHRISHI VEDA

3.905

SONY

3.907

ENTERTAINMENT

319

320

321

DD NEWS

4.157

4.182

4.185

6.30

7.56/7.74

6.60

50uS

DNR

50uS

MTV INDIA

ZEE MUSIC

62.0E

INTELSAT 602

IRIB TV 4

322

323

324

325

326

10.964

10.998

11.096

11.174

3.927

6.80

50uS

IRIB TV 2

IRIB TV 3

50uS

IRIB TV 1

50uS

M-NET

50uS

60.0E

INTELSAT 604

NEWS FEED

FEED

327

328

4.166

4.188

6.60

50uS

57.0E

NSS 703

329

330

331

332

333

334

335

336

337

338

HSTV CHANNEL 3

SUN TV

3.735

3.750

3.770

3.798

3.808

3.890

3.917

3.924

4.135

4.178

6.80

6.60

6.80

6.50

6.80

6.60

50uS

MCOT CHANNEL 9

RTNC

UDAYA TV

SURYA

ETV

BBCWORLD

TVI-TV INDIA

MTA

INTERNATIONAL

55.1E

INSAT 2DT

5.50

5.80

50uS

339

340

341

342

FEED

3.811

3.848

3.922

3.959

FEED

UTTAR PRADESH

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

NATIONAL

FREQ

POL

BAND

AUDIO

DE-EMP

343

344

345

346

347

348

349

3.979

3.996

4.014

4.033

4.052

4.070

4.089

5.80

50uS

PUNJAB

RAJASTHAN

FEED

ORIYA

BIHAR

FEED

42.0E

TURKSAT 1C

ATV

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

10.965

11.006

11.026

11.048

11.086

11.093

11.122

11.142

11.177

11.465

11.497

11.512

11.553

11.564

11.585

11.660

11.683

6.65

7.02

6.60

6.65

6.60

6.65

50uS

DNR

50uS

ATV

CINE 5

KANAL D

SHOW TV

STAR TV

TRT INT

SAMANYOLU TV

KANAL 7 INT

TRT 1

TRT 3

TRT 4

BRT

TRT AVRASYA

D FUN

TRT 2

KRAL TV

SUPER SPORT

TELSAT SEASAT/ W4

D+FEED

36.0E

368

369

370

10.976

12.225

12.322

6.60

6.80

6.60

50uS

RASIA TV

CCG TEST CARD

TURKSAT 1B

APCA TV

TELSAT II F3

TEST

31.3E

371

21.5E

11.090

6.65

50uS

372

373

11.012

11.556

6.60

6.50

50uS

TV SHIPTAR

TELSAT W2

RTM 1

16.0E

374

375

376

377

378

379

380

381

382

383

384

385

10.964

11.095

11.148

11.163

11.178

11.280

11.444

11.471

11.512

11.554

11.569

11.599

6.60

50uS

ALGERIAN

BHT SAT

TV RINIA

SAT-7

RADIO TE

JSC-AL

NILE TV

ESC 1

JAMAHIRY

SYRIA TV

TV 7

10.E

TELSAT W1

NTV

386

387

10.987

11.080

6.65

6.60

50uS

TV MONTE

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

TGRT

FREQ

POL

BAND

AUDIO

DE-EMP

388

389

390

391

392

393

394

395

396

397

398

11.095

11.163

11.177

11.621

11.095

11.177

11.621

6.65

6.50

50uS

DNR

HERBALIF

INTERSTA

SAMANYOL

MORAL FM

METRO FM

KRAL FM

SUPER FM

BURU RAD

DYNYA RA

RADYO SA

SIRIUS 2/3

VH-1

6.65

7.74

7.02/7.20

7.38/7.56

8.10/8.28

7.02/7.20

7.74/7.92

8.10/8.28

5.0E

399

400

11.785

11.809

11.823

11.862

11.900

11.919

11.938

12.015

12.092

12.207

12.265

12.322

12.476

12.437

11.938

12.265

12.476

6.60

50uS

DNR

50Us

50uS

DNR

TEST CARD

BLOOMBERG

Z TV

6.60

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

6.60

HALLMARK

VIASAT P

TV 4

6.60

7.02/7.20

6.60

TV 6

NIKELOD

TV 3 SWE

MTV NORD

CYPRUS S

VIASAT S

KANAL 5

TEST CARD

THE VOICE

RIK 1

6.60

6.50

7.74/7.92

7.20

RIK 3

7.74

RIK 3

7.74/7.92

THE VOICE

1.0W

THOR1/2/3/INTELSAT707

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

TV DANMARK

NORSK TV 2

C+NORGE

NRK

11.216

11.293

11.325

11.341

11.357

11.421

11.434

11.727

11.747

11.797

11.823

11.862

11.938

12.015

12.054

12.092

11.001

6.60

6.20

50Us

50uS

50Us

50uS

KANAL 5

NRK 1

TV NORGE

DR2

TV 2 ZULU

FOX KIDS UK

TV 1000 CINA

SPORT NORDIC

TCC NORDIC

CANAL+GUL

K-TV

C+SVERIGE

CARTOON

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

SATELLITE

TV 1000

FREQ

POL

BAND

AUDIO

DE-EMP

437

438

439

440

441

442

443

444

11.054

11.096

11.473

11.485

11.597

3.800

6.60

6.20

6.60

50uS

TV 3N

TV 3D

CNN

TV 3 S

RTG

TV 2

3.850

PEOPLE’ S TV

AMOS 1

IBA CH 1

METV

4.022

4.0W

5.0W

445

446

447

11.012

11.181

11.598

6.60

6.20

50uS

CHANNEL 2

TELECOM 2C

448

449

450

451

452

453

454

455

12.522

12.564

12.585

12.606

12.628

12.647

12.690

12.732

5.80

50uS

FRANCE 2

TV 5

LA CINQUIE

TV 5 INFO

C+FRANCE

TF 1

FRANCE 3

TELECOM 2A/2D

C+FRANCE

EXPRESS 3A

ORT

8.0W

456

12.640

3.675

7.02/7.20

6.60

DNR

50uS

11.0W

457

12.5W

458

18.0W

459

TELSAT II F2

DIGITALY

INTELSAT 705

FEED

12.554

6.60

50uS

11.012

11.052

11.092

11.095

11.136

11.138

11.548

4.166

460

461

462

463

464

465

466

467

FEED

4.188

21.5W

NSS 803

468

469

470

471

472

473

474

475

476

477

478

479

480

11.500

11.525

11.530

11.590

11.624

11.675

11.680

11.735

11.840

12.588

3.724

6.60

6.80

6.60

5.80

50uS

FEED

FOX FEED

DW TV

FEED 193L

FEED

CFI AFRIQUE

Download from Www.Somanuals.com. All Manuals Search And Download.

SADPCI-202 Channel Listing

481

SATELLITE

TV 5

FREQ

3.924

POL

BAND

AUDIO

6.60

DE-EMP

50uS

27.5W

INTELSAT 605

TPA

FEED

BOP TV

ALGERIE

NTA

482

483

484

485

486

487

3.799

3.890

3.898

4.002

4.065

11.591

6.65

6.60

7.50

6.20

6.60

50uS

SIS

30.0W

488

31.5W

489

490

34.5W

HISPASAT 1A/1B/1C

C+ESPANA

INTELSAT 801

TELE SAHEL

INTELSAT 601

MTA INT

FEED

12.711

6.60

50uS

3.918

11.160

6.60

50uS

491

492

493

494

495

496

497

498

499

500

11.010

4.166

6.50

7.02

7.20

7.38

7.56

7.74

7.92

6.60

50uS

DNR

50Us

50uS

FEED

4.188

40.5W

501

43.0W

NSS 806

ATC

4.167

6.60

50uS

PAS 3R/6/6B

CHURCH

TEST CARD

US PGA

FEED

PGA

FEED

502

503

504

505

506

507

508

12.515

12.525

12.540

12.700

12.705

12.730

6.60

50uS

45.0W

PAS 1

509

510

511

512

513

PANAMERICANA

AMERICA

LATINA

RTP CANAL 7

FEED

3.771

3.789

3.869

3.930

11.724

11.200

6.80

5.80

6.80

50uS

J17

50uS

DNR

514~600

SPARE

7.02/7.20

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Table

MO/STEREO

FREQ L/R

B/W

DE-EMP

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

030

031

032

033

034

035

036

037

038

039

040

041

042

043

044

045

046

047

048

049

050

STER

7.02/7.20

7.38/7.56

7.74/7.92

8.10/8.28

7.02/7.02

7.20/7.20

7.38/7.38

7.56/7.56

5.80/5.80

6.20/6.20

6.50/6.50

6.60/6.60

6.65/6.65

7.00/7.00

7.50/7.50

5.58/5.76

5.94/6.12

6.30/6.48

6.80/6.80

7.40/7.40

7.74/7.74

6.70/6.70

7.38/7.38

7.50/7.50

7.90/7.90

8.40/8.40

7.80/7.80

7.92/7.92

6.66/6.66

6.40/6.40

5.50/5.50

6.94/6.94

7.80/7.80

8.10/8.10

8.28/8.28

8.46/8.46

7.56/7.74

6.66/6.84

7.25/7.25

6.84/6.84

7.92/7.92

7.74/7.92

7.38/7.56

7.02/7.20

130

280

380

280

380

280

130

180

130

180

130

280

130

280

130

280

130

DNR

50uS

J17

50uS

J17

50uS

J17

50uS

DNR

50uS

DNR

50uS

DNR

50Us

50uS

50Us

50uS

DNR

50uS

DNR

STER

MONO

STER

MONO

STER

MONO

STER

Download from Www.Somanuals.com. All Manuals Search And Download.

Common interface:

Your receiver is equipped with a twin-slot Common Interface (CI), accepting both Type 1 and Type 2

PCMCIA modules (see diagram below). Plug in the appropriate CI module together with a valid

SMART Card. You will then have access to the respective scrambled and pay-per-view services.

( CI )

Insert the SMART card into the CI module, and the

module into the slots provided behind the hinged door

at the front of the receiver.

Press to eject the each

of the CI modules

The CI and SMART card modules determine the programmes that can be de-scrambled. This receiver

supports two CI slots so you can plug in two different modules.

Each SMART card contains your subscription details. You can view your entitlement via the CI option

on the receiver’s main menu .

Insert the CI module into the slot provided (behind the hinged door on the front panel) until the eject

button is fully extended. Press the button to eject the CI module.

The SMART card must be inserted with the gold contact pad facing up. Ensure that these contacts are

clean before inserting it into the CI module.

Note:

Both the SMART card and CI modules support “hot-plugging”, this means that the SMART card and CI

module may be inserted or removed with the receiver switched on.

Both the CI module and SMART card contain delicate electronic circuitry, please handle them with

care when inserting and removing them from the receiver.

Under NO circumstances bend the SMART card or place it on a hot surface. This may damage the

card and the CI module.

At times, certain CI modules may stop responding causing the receiver to stop decoding. When this

happens, simply switch the receiver to stand-by and then on again to reset the CI module.

Download from Www.Somanuals.com. All Manuals Search And Download.

Common Interface (cont.):

To access the Common Interface menu:

Press Menu, select CI.

Irdeto

VIACCESSV

The information available on the CI menu depends

on the CI module provider. Typically they will contain

subscription information such as subscription duration,

accessible programmes, maturity level, network

information etc. For more information, please consult

Your Pay-TV service provider.

On-screen messages:

Apart from the Common Interface menu, other on-screen messages may appear while in viewing

mode. Here are two examples:

Irdeto

Please insert smart card

When a message similar to the one on the right

appears, insert the appropriate SMART card to

access the channel.

Your SMART card cannot access the channel -

You may require a different SMART card for

this programme. You should note that these

messages come from the CI/SMART card

module and so will vary. Please refer to the

You have no access to

This channel.

Press OK to continue.

information provided with your Subscription /

CI module.

Sometimes the above screen may appear over a de-scrambled channel. This may be caused by

having two identical CI modules inserted but each with a SMART card from a different service provider

(for example: two Viaccess CI modules with one using a TPS SMART card and the other using an

ABSAT SMART card). In this case as a TPS channel is being accessed, the TPS SMART card will

de-scramble that channel but at the same time the ABSAT SMART card will display the‘ NO ACCESS’

message on-screen. When this happens, press OK to cancel the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications:

Electrical Specification

Video Inputs:

Input impedance 75W

0.7V pk-pk on R/G/B,

1V pk-pk on CVBS/Y

Video Outputs:

Output impedance 75W

0.7V pk-pk on R/G/B,

0.1V pk-pk on CVBS/Y into 75W load.

Input impedance >50kWAC coupled

Output impedance 600WAC coupled

Minimum load impedance 20kW

90-250VAC 50-60Hz

Audio Inputs:

Audio Outputs:

Mains power:

Connectors

4 x Phono/RCA:

Composite video out

0/12V out

Audio left

Audio right

RS232:

Modulator/Bypass:

9 Way D RS232 DCE serial port

UHF in/out IEC male/female or:

VHF in/out F-type (country dependent)

F-type

Satellite IF input:

Satellite IF loop out:

Tuner

F-type

Loop though Digital tuner with LNB input, and loop output

Full power loop through supported

Frequency Range at LNB input:

Input connector:

Impedance:

920-2150MHz

F-type female

75W

Input sensitivity:

-30 to -65dBm

LNB supply voltages

Supply voltage software switchable:

Current limit:

13V/18V

0 to 400mA

Software controlled LNB power on/off

LNB 22kHz Tone switching:

Amplitude:

0.6Vpp (±0.2V)

22KHz ± 2KHz

50% (±20%)

Frequency:

Duty Cycle:

Full DiSEqC specification V1.0 supported

Universal LNB supported

Software controlled on/off

0/12V accessory switch:

Software controlled on/off

Demodulator and FEC

Demodulator:

Type:

Fully DVB compliant

QPSK

Filtering:

Input symbol rate:

0.2 or 0.35 Square root raised cosine

2 Msps to 45 Msps fully variable

Forward Error Correction:

Code rates supported:

1/2, 2/3, 3/4, 5/6, 7/8 (Auto Sensed)

Download from Www.Somanuals.com. All Manuals Search And Download.

Transport, A/V Decoding

Demultiplexor:

PID Filters:

PCR recovery:

1 Video, 1 Audio, 30 general purpose (SI capable)

internal 27MHz PLL locked to PCR

Video Decoder:

Bitstreams Supported:

MPEG2 MP@ML to ISO/IEC 13818-2

MPEG1 to ISO/IEC 11172-2

Up to 720 x 576 pixels at 25 fps for PAL

Up to 720 x 480 pixels at 30 fps for NTSC

16Mbit

Video Resolution:

Video Memory:

Audio Decoder:

Type:

MPEG1

Layers:

Audio Modes:

Output Sample Rates Supported:

Data rates supported

I and II

Mono, Dual, Stereo, Joint Stereo

16kHz, 22.05kHz, 24kHz, 32kHz 44.1kHz, 48kHz

8 to 448 Kbps

PAL/NTSC Encoder:

Supported Outputs:

Composite, RGB, S-Video NTSC-M,

PAL B,D,G,H,I,M,N,Nc

(country dependent)

UHF/VHF Modulator:

Tuning Range:

(UHF):

CH21 to CH69

(VHF):

CH3, 4

(country dependent)

Processor and memory

System CPU:

RAM:

40 MIPS, Cached

512k standard

1MB standard

256kBit

ROM:

EEPROM:

Power consumption

Operational

30W max.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Shack CD Player CD 3318 User Guide
RCA CRT Television F27685 User Guide
RCA DVD VCR Combo DVD Recorder VCR Combo User Guide
RCA MP3 Player TH161 Series User Guide
RCA Tablet RCT6773W22 B User Guide
RocketFish Computer Drive RF P2USB3 User Guide
Royal Sovereign Laminator RSC 1400C User Guide
Ryobi Blood Pressure Monitor P731 User Guide
Schumacher Battery Charger SC 8000A User Guide
Seagate Computer Drive WS 110 User Guide