Samsung Projection Television ST 42W5P User Guide

ST-42W5P  
PROJECTION TELEVISION  
.............  
Ow ners  
Instructions  
BP68-00053A-00(ENG)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning! Im portant  
Safety Instructions  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol indicates high voltage is present inside. It is  
dangerous to make any kind of contact with any inside part of  
this product.  
This symbol alerts you that important literature concerning  
operation and maintenance has been included with this product.  
Note to CATV system installer: This reminder is provided to call CATV system  
installers attention to Article 820-40 of the National Electrical Code (Section 54 of  
Canadian Electrical Code, Part I), that provides guidelines for proper grounding  
and, in particular, specifies that the cable ground shall be connected to the  
grounding system of the building as close to the point of cable entry as practical.  
Caution: FCC/CSA regulations state that any unauthorized changes or modifica-  
tions to this equipment may void the users authority to operate it.  
Caution: To prevent electric shock, match the wide blade of plug to the wide slot,  
and fully insert the plug.  
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la  
fiche dans la borne correspondante de la prise et pousser jusquau fond.  
Important: One Federal Court has held that unauthorized recording of  
copyrighted TV programs is an infringement of U.S. copyright laws.  
Certain Canadian programs may also be copyrighted and any unauthorized  
recording in whole or in part may be in violation of these rights.  
To prevent damage which may result in fire or electric shock  
hazard, do not expose this appliance to rain or moisture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank You for Choosing Sam sung  
Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest in  
television technology. We designed it with easy-to-use on-screen menus and closed captioning  
capabilities, making it one of the best products in its class. We are proud to offer you a product  
that will provide convenient, dependable service and enjoyment for years to come.  
Im portant Safety Inform ation  
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,  
and other injuries, keep these safety precautions in mind when installing, using, and  
maintaining your machine.  
Read all safety and operating instructions before operating your TV.  
Keep the safety and operating instructions for future reference.  
• Heed all warnings on the TV receiver and in the operating instructions.  
• Follow all operating and use instructions.  
• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use  
liquid or aerosol cleaners.  
• Never add any attachments and/or equipment without approval of the manufacturer. Such  
additions can increase the risk of fire, electric shock, or other personal injury.  
• Do not use the TV receiver where contact with or immersion in water is a possibility, such as  
near bath tubs, sinks, washing machines, swimming pools, etc.  
• Do not place the TV on an unstable cart, stand, tripod, bracket, or  
table where it can fall. A falling TV can cause serious injury to a  
child or adult, and serious damage to the appliance. Use only with  
a cart, stand, tripod, bracket, or table recommended by the manu-  
facturer or sold with the TV. Follow the manufacturers instruc-  
tions when mounting the unit, and use a mounting accessory rec-  
ommended by the manufacturer. Move the TV and cart with care.  
Quick stops, excessive force, and uneven surfaces can make the  
unit and cart unsteady and likely to overturn.  
• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for  
ventilation to protect it from overheating. Do not block these openings with any object, and  
do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near  
a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that  
there is adequate ventilation and that youve followed the manufacturers instructions for  
mounting.  
• Operate your TV receiver only from the type of power source indicated on the marking label.  
If you are not sure of the type of power supplied to your home, consult your appliance dealer  
or local power company.  
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized  
alternating current line plug having one blade wider than the other. This plug will fit into the  
power outlet only one way. If you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.  
SAFETY  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Protect the power cord. Power supply cords should be routed so that they wont be walked on  
or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con-  
venience receptacles, and the point where they exit from the unit.  
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light-  
ning storm or when left unattended and unused for long periods of time. This will prevent dam-  
age to the unit due to lightning and power-line surges.  
Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of  
overhead power lines or other electric light or power circuits or where it can fall into such  
power lines or circuits. When installing an outside antenna system, be extremely careful to keep  
from touching the power lines or circuits. Contact with such lines can be fatal.  
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric  
shock.  
• Do not insert anything through the openings in the unit, where they can touch dangerous volt-  
age points or damage parts. Never spill liquid of any kind on the TV.  
• Ground outdoor antennas. If an outside antenna or cable  
EXAMPLE OF  
ANTENNA GROUNDING  
system is connected to the TV, be sure the antenna or  
ANTENNA  
LEAD IN WIRE  
cable system is grounded so as to provide some  
GROUND CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
protection against voltage surges and built-up static  
charges. Section 810 of the National Electrical Code,  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING  
CONDUCTORS  
(NEC SECTION 810-21)  
ANSI/NFPA No.70-1984, provides information about  
proper grounding of the mast and supporting structure,  
GROUND CLAMPS  
grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
discharge unit, connection to grounding electrodes, and  
NEC — NATIONAL ELECTRICAL CODE  
requirements for the grounding electrode.  
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.  
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the  
following conditions:  
- when the power-supply cord or plug is damaged  
- if liquid has been spilled on the unit or if objects have fallen into the unit  
- if the TV has been exposed to rain or water  
- if the TV does not operate normally by following the operating instructions  
- if the TV has been dropped or the cabinet has been damaged  
- when the TV exhibits a distinct change in performance  
• If you make adjustments yourself, adjust only those controls that are covered by the operating  
instructions. Adjusting other controls may result in damage and will often require extensive  
work by a qualified technician to restore the TV to normal.  
• When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in additional damage to the unit.  
• Upon completion of any service or repairs to this TV, ask the service technician to  
perform safety checks to determine that the TV is in a safe operating condition.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference that may cause undesired operation.  
This television receiver provides display of television closed captioning in accordance with  
§15.119 of the FCC rules.  
2
SAFETY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im portant Warranty Inform ation  
Regarding Television Form at  
View ing  
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are  
primarily designed to view standard format full-motion video. The images displayed on  
them should primarily be in the standard 4:3 ratio format and constantly moving.  
Displaying stationary graphics and images on screen, such as the dark top and bottom  
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are  
primarily designed to view wide screen format full-motion video. The images displayed  
on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the  
screen if your model offers this feature, and constantly moving. Displaying stationary  
graphics and images on screen, such as the dark side-bars on non-expanded standard  
format television video and programming, should be limited to no more than 15% of the  
total television viewing per week.  
Additionally, viewing other stationary images and text such as stock market reports,  
video game displays, station logos, web sites or computer graphics and patterns, should  
be limited as described above for all televisions. Displaying any stationary images that  
exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the television picture. To avoid this, vary the program-  
ming and images, and primarily display full screen moving images, not stationary patterns or  
dark bars. On television models that offer picture sizing features, use these controls to  
view the different formats as a full screen picture.  
Be careful in the selection and duration of television formats used for viewing. Uneven  
CRT aging as a result of format selection and use, as well as other burned-in images, is  
not covered by your Samsung limited warranty.  
SAFETY 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1  
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1  
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . .1.2  
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2  
Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3  
Using the Component Shelf . . . . . . . . . . . . . . . . . . . . . . . . .1.3  
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5  
Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1  
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . .2.1  
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . .2.1  
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . .2.2  
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . .2.2  
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.2  
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . .2.2  
Connecting to a Cable Box that Descrambles  
All Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.3  
Connecting to a Cable Box that Descrambles  
some Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.3  
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5  
Connecting a Second VCR to Record from the TV . . . . . . . .2.6  
Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.6  
Connecting a DVD Player, DTV Set-Top Box (480i, 480p, 1080i) . . .2.7  
Connecting a DTV Set-Top Box (480p, 1080i) . . . . . . . . . . . . . . . . . .2.8  
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . .2.9  
Chapter 3: Operation . . . . . . . . . . . . . . . . . .3.1  
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.1  
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.1  
Using the Perfect Focus Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.3  
Adjusting Manual convergence . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.4  
Adjust Red Convergence . . . . . . . . . . . . . . . . . . . . . . . . . . .3.5  
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . .3.6  
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.6  
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.6  
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.7  
Selecting the Antenna Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.7  
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.8  
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . .3.8  
Storing Channels in Memory (Automatic Method) . . . . . . . .3.9  
Adding and Erasing Channels (Manual Method) . . . . . . . . .3.9  
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.10  
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . .3.10  
Using the Number Buttons . . . . . . . . . . . . . . . . . . . . . . . .3.10  
Using the Previous Channel . . . . . . . . . . . . . . . . . . . . . . . .3.10  
Selecting Your Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .3.11  
To Store Your Favorite Channels: . . . . . . . . . . . . . . . . . . . .3.11  
To View Your Favorite Channels: . . . . . . . . . . . . . . . . . . . .3.11  
Adding and Erasing Channels (Manual Method) . . . . . . . . . . . . . . .3.12  
Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.13  
Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.14  
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . .3.14  
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . .3.15  
Selecting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . .3.16  
1
CONTENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 3: Operation (Cont.) . . . . . . . . . .3.16  
Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.16  
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.16  
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.16  
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . .3.17  
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . .3.18  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.19  
Option 1: Setting the Clock Manually . . . . . . . . . . . . . . . .3.19  
Option 2: Using the Local PBS Channel to Automatically  
Set the TV Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.20  
Chapter 4: Special Features . . . . . . . . . . . .4.1  
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.1  
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2  
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.3  
Using the R.surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.4  
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.6  
Extra sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.7  
Choosing a Multi-Channel Sound (MTS) track . . . . . . . . . . . . . . . . .4.8  
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.9  
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.10  
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . .4.10  
Selecting a Signal Source (Antenna or Cable) for PIP . . . . .4.11  
Selecting a Signal Source (External A/V) for PIP . . . . . . . . .4.11  
Swapping the Contents of the PIP image and Main image .4.12  
Changing the Size of the PIP Window . . . . . . . . . . . . . . . .4.12  
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . .4.13  
Changing the Location (Rotating) the PIP mode . . . . . . . .4.13  
Scanning the Available Channels . . . . . . . . . . . . . . . . . . . .4.13  
Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.14  
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . .4.14  
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . .4.15  
How to Set up Restrictions Using the “TV guidelines” . . . .4.15  
How to Set up Restrictions using the MPAA Ratings:  
G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . .4.17  
How to Reset the TV after the V-Chip Blocks  
a Channel (Emergency Escape”) . . . . . . . . . . . . . . . . . . . .4.18  
Viewing the Demonstration . . . . . . . . . . . . . . . . . . . . . . . .4.19  
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .4.20  
Setting Up Your Remote Control to Operate Your  
VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.20  
Setting Up Your Remote Control to Operate Your  
Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.21  
Chapter 5: Troubleshooting . . . . . . . . . . . .5.1  
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.1  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .A.1  
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . .A.1  
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . .A.1  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A.1  
CONTENTS  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r O n e  
YO UR NEW TV  
List of Features  
Your Samsung TV was designed with the latest technology. This TV is a high-performance  
unit that includes the following special features:  
• Easy-to-use remote control  
• Easy-to-use on-screen menu system  
Automatic timer to turn the TV on and off  
Adjustable picture and sound settings that can be stored in the TVs memory  
Automatic channel tuning for up to 181 channels  
• A special filter to reduce or eliminate reception problems  
• Fine tuning control for the sharpest picture possible  
• A built-in multi-channel sound decoder for stereo and bilingual listening  
Built-in, dual channel speakers  
• A special sleep timer  
• Picture-in-Picture  
• Component Video Input jacks to obtain a sharper image from external sources  
• Perfect Focus  
1.1  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Fam iliarizing Yourself w ith The TV  
Front Panel Buttons  
The buttons on the front panel control your TVs basic features, including the on-screen  
menu. To use the more advanced features, you must use the remote control.  
Œ
´
ˇ
¨
ˆ
Ø
TV/ VIDEO  
All the inputs connected to the external component jacks will be shown in regular sequence.  
MUTE  
Press to temporarily cut off the sound.  
MENU  
Press to see an on-screen menu of your TV's features.  
VOL – , +  
Press to increase or decrease the volume. Also used to select items on the on-screen menu.  
CHand CHꢀ  
Press to change channels. Also press to highlight various items on the on-screen menu.  
Rem ote Control Sensor  
Aim the remote control towards this spot on the TV.  
Tim er indicator  
When the TV is turned on, the Timer indicator blinks about ten times. This indicator illuminates when the Timer mode is  
set to the “On” position after setting the clock and either the On timer or Off timer, with the remote control. Even if the  
power is turned off, this indicator stays lit. (Clock must be set before using this function.).  
POWER  
Press to turn the TV on and off.  
CHAPTER ONE: YOUR NEW TV 1.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Side Panel J acks  
You can use the side panel jacks to connect an A/V component that is used only  
occasionally, such as a camcorder or video game. (For information on connecting  
equipment, see pages 2.1 2.8.)  
Œ
´
ˇ
¨
PERFECT FOCUS  
Press to adjust for the optimum picture set in the Factory.  
VIDEO INPUT jack  
Use to connect a video signal from a camcorder or a video game.  
AUDIO INPUT jacks  
Use to connect the audio signals from a camcorder or video game.  
S-VIDEO INPUT jack  
Use to connect an S-Video signal from a camcorder or a video game.  
1.3  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rear Panel J acks  
Use the rear panel jacks to connect an A/V component that will be connected continu-  
ously, such as a VCR or a DVD player.  
Because there are two sets of input jacks, you can connect two different A/V components  
(i.e., a VCR and a DVD, 2 VCRs, etc.)  
For more information on connecting equipment, see pages 2.1 2.8.  
Œ
ANTENNA term inals  
¨
AUDIO INPUT jacks  
Connect to the audio output jacks of VCRs, DVD  
players and similar devices.  
Two independent cables or antennas can be  
connected to these terminals. Use ANT-A and  
ANT-B terminals to receive a signal from  
VHF/UHF antennas or your cable system. Use  
the ANT-A OUT terminal to send the signal being  
received by the ANT-A terminal out to another  
component (such as a Cable Set Top Box). The  
PIP channel can be received only when a signal  
source is connected to ANT-A.  
ˆ
Ø
S-VIDEO INPUT jack  
Connect to an S-VHS VCR or DVD player.  
COMPONENT 1(480i, 480p,  
1080i) AUDIO/ VIDEO INPUT  
jacks  
Connect a source that outputs 480i/480p/1080i  
B
R
´
ˇ
AUDIO-VIDEO MONITOR  
OUTPUT jacks  
Connect to the audio/video input jacks of a  
recording VCR.  
Note: The monitor out does not operate in DVD  
or DTV mode.  
Y,P and P signals, such as a DVD (or DTV Set-  
Top Box.  
COMPONENT 2(480p, 1080i)  
AUDIO/ VIDEO INPUT jacks  
Connect a source that outputs 480p/1080i Y, P  
B
R
and P signals, such as a DTV Set-Top Box.  
VIDEO INPUT jacks  
Connect to the video output jacks of VCRs, DVD  
players and similar devices (Two sets are avail-  
able: Video1 and Video2).  
CHAPTER ONE: YOUR NEW TV 1.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control  
You can use the remote control up to about 23 feet from the TV. When using the remote,  
always point it directly at the TV.  
You can also use your remote control to operate your VCR and cable box. See page 4.20  
for details.  
Œ
´
Pow er  
Turns the TV on and off.  
˝
Mute  
Press to temporarily cut off  
the sound.  
+100  
Press to select channels over 100.  
For example, to select channel  
121, press +100,then press 2”  
and 1.”  
Ô
Pre-CH  
Tunes to the previous channel.  
TV/ Video  
All the inputs connected to the  
external component jacks will be  
shown in regular sequence.  
ˇ
¨
Still(Main)  
Press to stop the action during a  
particular scene. Press again to  
resume normal video.  
Ò
Menu  
Displays the main on-screen  
CH and CH  
(Channel Up/ Dow n)  
Press CH or CH to change  
channels.  
menu.  
Ú
Æ
ı
Caption  
Controls the caption decoder.  
VOL -, VOL  
+
Press increase or decrease the  
volume.  
PIP  
Activates picture in picture.  
ˆ
Ø
Sleep  
Press to select a preset time inter-  
val for automatic shutoff.  
Perfect Focus  
Press to adjust for the optimum  
picture set in the Factory.  
Display  
˜
Fav. CH (Favorite  
Channel)  
Press to switch between your  
favorite channels.  
Press to display the current chan-  
nel and the audio-video  
settings.  
Aspect  
Press to change the screen size.  
BBE  
BBE is a built-in effect that adds  
clarity, punch and dynamics to the  
sound.  
MTS (Multichannel  
Television Sound)  
Press to choose stereo, mono or  
Separate Audio Program (SAP  
broadcast).  
1.5  
CHAPTER ONE: YOUR NEW TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control (continued)  
¯
˘
ANT A/ B  
Press to select the ANT A or ANT  
B.  
Mode  
Selects a target device to be  
controlled by the Samsung  
remote control(i.e., TV, VCR,  
Cable box or DVD).  
R.surf  
Press to automatically return to a  
preferred channel after a user-  
preset time delay.  
Set  
Used during set up of this  
Samsung remote control, so that  
it will work compatibly with  
other devices (VCR, cable box,  
DVD.)  
¿
¸
S.Mode  
Adjust the TV sound by selecting  
one of the preset factory settings  
(or select your personal, cus-  
tomized sound settings).  
V.Chip  
Press to set up and activate the  
parental locks.  
P.Mode  
Adjust the TV picture by select-  
ing one of the preset factory set-  
tings (or select your personal,  
customized picture settings).  
Add/ Erase  
Press to add or erase channels  
in the TVs memory.  
˛
VCR controls  
Controls VCR tape functions:  
Rewind, Play, Fast Forward, Stop,  
Pause.  
PIP Controls  
Source  
Press to select one of the avail-  
able signal sources for the PIP  
window.  
Scan  
Press to memorize (scan) the  
available channels.  
Locate  
Press to move the PIP window to  
any of the four corners of the TV  
screen.  
Sw ap  
Exchanges the video signal that  
is currently displayed on the  
main screen with the signal in  
the PIP window.  
Size  
Press to make the PIP window  
large, small or stock ticker.  
CH  
Displays the available channels  
in sequence. (These buttons  
change channels in the PIP win-  
dow only).  
CHAPTER ONE: YOUR NEW TV 1.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Ch a p t e r Tw o  
INSTALLATIO N  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that  
look like this, see “Antennas with  
300-ohm Flat Twin Leads,” below.  
If your antenna has one lead that looks  
like this, see “Antennas with 75-ohm  
Round Leads,” on page 2.2.  
If you have two antennas, see “Separate  
VHF and UHF Antennas,” on page 2.2.  
Antennas w ith 300-ohm Flat Tw in Leads  
If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has 300-  
ohm twin flat leads, follow the directions below.  
1
Place the wires from the  
twin leads under the  
screws on the 300-75  
ohm adaptor (not sup-  
plied). Use a screwdriver  
to tighten the screws.  
2
Plug the adaptor into the  
ANT-A or ANT-B terminal  
on the rear panel.  
2.1  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Antennas w ith 75-ohm Round Leads  
Plug the antenna lead  
into the ANT-A or ANT-B  
terminal on the rear  
panel.  
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must combine  
the two antenna signals before connecting the antennas to the TV. This procedure requires a  
an optional combiner-adaptor (available at most electronics shops).  
1
Connect both antenna  
leads to the combiner.  
2
Plug the combiner into  
the ANT-A or ANT-B ter-  
minal on the rear panel.  
Connecting Cable TV  
You can connect different cable systems to your TV, including cable without a cable box,  
and cable with a cable box that descrambles some or all channels.  
Cable w ithout a Cable Box  
If you want to connect cable, and you do not need to use a cable box:  
Plug the incoming cable  
into the ANT-A or ANT-B  
antenna terminal on the  
rear of the TV.  
CHAPTER TWO: INSTALLATION  
2.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Cable w ith a Cable box that Descram bles All Channels  
1
Find the cable that is  
connected to the  
ANTENNA OUT terminal  
on your cable box. This  
terminal might be  
labeled “ANT OUT,  
VHF OUT, or simply,  
OUT.  
2
Connect the other end of  
this cable to the ANT-A  
or ANT-B terminal on the  
rear of the TV.  
Connecting to a Cable Box that Descram bles Som e Channels  
If your cable box descrambles only some channels (such as premium channels), follow the  
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of  
coaxial cable. (These items are available at most electronics stores.)  
This terminal might be labeled  
“ANT IN,” “VHF IN,” or simply,  
“IN.”  
1
Find and disconnect the  
cable that is connected  
to the ANTENNA IN ter-  
minal on your cable box.  
2
Connect this cable to a  
two-way splitter.  
3
Connect a coaxial cable  
between an OUTPUT ter-  
minal on the splitter and  
the IN terminal on the  
cable box.  
2.3  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
4
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the  
cable box and the BIN  
terminal on the A/B  
switch.  
5
Connect another cable  
between the other OUT  
terminal on the splitter  
and the AIN terminal on  
the RF (A/B) switch.  
6
Connect the last coaxial  
cable between the OUT  
terminal on the RF (A/B)  
switch and the VHF/UHF  
terminal on the rear of  
the TV.  
After youve made this connection, set the A/B switch to the Aposition for normal view-  
ing. Set the A/B switch to the Bposition to view scrambled channels. (When you set the  
A/B switch to B,you will need to tune your TV to the cable boxs output channel, which is  
usually channel 3 or 4.)  
CHAPTER TWO: INSTALLATION  
2.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a VCR  
These instructions assume that you have already connected your TV to an antenna or a  
cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have  
not yet connected to an antenna or a cable system.  
1
Connect a coaxial cable between the  
ANTENNA OUT terminal on the VCR and the  
antenna terminal on the TV.  
A coaxial cable is usually included with a  
VCR. (If not, check your local electronics  
store).  
2
Connect a set of audio cables between the  
AUDIO OUT jacks on the VCR and the  
AUDIO jacks on the TV.  
If you have a mono VCR, connect L(mono)  
to VCR audio out using only one audio  
cable.  
3
Connect a video cable between the VIDEO  
OUT jack on the VCR and the VIDEO jack on  
the TV.  
If you have a S-VHS VCR, use the S-Video  
connections and remove the video cable.  
Do not connect the video cable and the S-  
Video cable to video 1 simultaneously.  
Follow the instructions in Viewing a VCR  
or Camcorder Tapeto view your VCR tape.  
2.5  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a Second VCR to Record from the TV  
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do  
this, connect your second VCR as follows:  
1
Connect a set of audio cables between  
the AUDIO OUT jacks on the TV and the  
AUDIO IN jacks on the VCR.  
(The VCR input jacks might be either  
on the front or rear of the VCR.)  
2
Connect a video cable between the  
VIDEO OUT jack on the TV and the  
VIDEO IN jack on the VCR.  
Refer to your VCRs instructions for  
more information about how to record  
using this kind of connection.  
Connecting a Cam corder  
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow  
you to view the camcorder tapes without using a VCR.  
1
Locate the A/V output jacks on the  
camcorder. They are usually found on  
the side or rear of the camcorder.  
2
Connect an audio cable between the  
AUDIO OUTPUT jack on the camcorder  
and the AUDIO terminals on the side of  
the TV.  
If you have mono camcorder, connect  
L(mono) to camcorder audio out using  
only one audio cable.  
3
Connect a video cable between the  
VIDEO OUTPUT jack on the camcorder  
and the VIDEO terminal on the sidet of  
the TV.  
The audio-video cables shown here are  
usually included with a Camcorder. (If  
not, check your local electronics store.)  
If your camcorder is stereo, you need to  
connect a set of two cables.  
CHAPTER TWO: INSTALLATION  
2.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a DVD Player, DTV Set-Top Box  
(480i, 480p, 1080i)  
The rear panel jacks on your TV make it easy to connect a DVD player (or DTV Set-Top  
Box) to your TV.  
B
R
Connecting to Y, P , P  
1
Connect a set of audio cables between  
the DVD audio in jacks on the TV and  
the AUDIO OUT jacks on the DVD player  
(or DTV Set-Top Box).  
2
To enable Component video viewing,  
B
connect video cables between the Y, P ,  
R
B
R
and P inputs on the TV and Y, P , and P  
B
R
(or Y, C , C ) outputs on the DVD player  
(or DTV Set-Top Box).  
Note: For an explanation of  
Component video, see your DVD  
players (or DTV Set-Top Box) owners  
instruction.  
Connecting to regular audio and video jacks  
1
Connect a set of audio cables between  
the AUDIO IN jacks on the TV and the  
AUDIO OUT jacks on the DVD player  
(or DTV Set-Top Box).  
2
Connect video cables between the  
VIDEO OUT jack on the DVD player  
(or DTV Set-Top Box) and the VIDEO  
IN jack on the TV.  
2.7  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a DTV Set-Top Box (480p, 1080i)  
When switching to the DTV mode, either 480p or 1080i format is automatically selected  
according to the input signal.  
Note: Only 480p and 1080i formats are supported.  
1
Connect a set of audio cables between  
the DTV Set-Top Box audio in jacks on  
the TV and the AUDIO OUT jacks on the  
DTV Set-Top box.  
2
To enable Component video viewing,  
B
connect video cables between the Y, P ,  
R
B
R
and P inputs on the TV and Y, P , and P  
B
R
(or Y, C , C ) outputs on the DTV Set-Top  
box.  
Note: For an explanation of  
Component video, see your DTV Set-  
top boxs owners instruction.  
CHAPTER TWO: INSTALLATION  
2.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Installing Batteries in the Rem ote Control  
1
Slide the back cover all  
the way out to open the  
battery compartment of  
the remote control.  
Make sure to match the +and  
2
ends of the batteries with the  
Install two AAA size  
batteries.  
diagram inside the compartment.  
Remove the batteries and store  
them in a cool, dry place if you wont  
be using the remote control for a  
long time.  
3
Replace the cover.  
The remote control can be used up  
to about 23 feet from the TV.  
(Assuming typical TV usage, the  
Batteries last for about one year.)  
2.9  
CHAPTER TWO: INSTALLATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Th r e e  
OPERATIO N  
Turning the TV On and Off  
Press the Power button.  
You can also use the POWER button on the front panel.  
Plug & Play Feature  
When the TV is initially powered On, five basic customer settings proceed automatically and  
subsequently: Setting the language, Ant. input check, and Auto program/Setting the Clock.  
1
Press the Power button on  
the remote control.  
The message “Plug & Play”  
is displayed.  
It flickers for a little while and  
then the “Language” menu is  
automatically displayed.  
2
Function  
Press the VOL + or VOL -  
Language  
Plug & Play  
Convergence  
Caption  
: English  
button to select the desired  
language. Press the Menu  
button to enter the language,  
and then the “ANT/CATV”  
menu is automatically  
displayed.  
Time  
Auto Clock Set  
V-Chip  
3
Channel  
Press the VOL + or VOL -  
button to select the desired to  
video signal source.  
Press the Menu button to  
enter the video signal source,  
and then the “Ant Input  
check” is automatically  
displayed.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
continued...  
CHAPTER THREE: TV OPERATION  
3.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
4
Make sure that the antenna  
is connected to the TV.  
And then press the VOL +  
or VOL - button to activate  
Auto Program” or press the  
MENU button to skip.  
(refer to “Auto program”  
on page 3.6)  
5
Time  
Press the VOL + or VOL -  
button to move to the hour  
or minute. Set the hour or  
minute by pressing the  
Clock  
- -  
- -  
- -  
:
:
:
- - am  
On Time  
Off Time  
Sleep Timer  
- - am Off  
- - am Off  
Off  
CH or CH  
button.  
(refer to “Setting the clock”  
on page 3.10)  
6
When you have finished,  
press the Menu button.  
The message “Enjoy your  
watching..” is displayed.  
7
Function  
: English  
If you want to reset this  
feature  
Language  
Plug & Play  
Convergence  
Caption  
(1)Press the Menu button.  
(2)Press the CH  
button  
Time  
Auto Clock Set  
V-Chip  
three times to select the  
Function menu and press  
the VOL + button.  
(3)Press the CH  
button to  
select “Plug & Play” and  
press the VOL + button.  
The message “Plug &  
Play” is displayed.  
Note: Plug & Play feature doesnt work when the V-chip is  
on or when in the A/V mode.  
3.2  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using the Perfect Focus Feature  
When the picture size is distorted after moving the TV set, use the Perfect Focus feature to  
adjust for the optimum picture size set in the Factory.  
You can also select Perfect  
Focus by pressing the Perfect Focus  
button.  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
: English  
Press the CH  
select “Function”, then  
button to  
Time  
press the VOL + button.  
Auto Clock Set  
V-Chip  
2
Function  
: English  
Press the CH  
button to  
Language  
Plug & Play  
Convergence  
Caption  
select “Convergence”, then  
press the VOL + button.  
Time  
Auto Clock Set  
V-Chip  
3
Convergence  
Press the CH button to  
select “Perfect Focus”, then  
press the VOL + button.  
Manual Convergence  
Red  
Blue  
Perfect Focus  
Perform Perfect Focus in the  
following sequence: Green  
Red Blue.  
Press Menu button to exit.  
Perfect Focus  
Mode On  
Process : 8%  
Notes  
• If any error happens during Perfect Focus, then perform Perfect Focus once again.  
• If you cant make adjustments after Perfect Focus, then make manual adjustments.  
Still you cant make adjustments, contact your Service Center.  
• The Perfect Focus function doesnt operate when component input is in 480P.  
CHAPTER THREE: TV OPERATION  
3.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adjusting Manual Convergence  
If the color appears spread out or smeared” on the screen, the convergence probably needs  
alignment. Be sure to use the remote control for the convergence adjustments.  
First steps:  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
: English  
Press the CH button to  
select “Function”, then  
press the VOL + button.  
2
Function  
: English  
Press the CH button to  
select “Convergence”, then  
press the VOL + button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
3
Convergence  
The “Manual Convergence”  
screen will appear, and the  
word “Red” will be high-  
lighted.  
Manual Convergence  
Red  
Blue  
Perfect Focus  
continued...  
3.4  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adjust Red Convergence  
4
While “Red” is highlighted, press  
the VOL + button: A crosshair  
pattern will appear on the screen.  
After moving the cursor to the  
position you want to adjust using  
the number buttons 2(up), 4(left),  
6(right), 8(down) on the remote  
control, adjust Red Convergence  
by pressing the VOL +/ VOL -/CH  
/CH buttons.  
5
If a horizontal red line is visible, use  
CH  
and CH  
buttons to move  
the line so that it is superimposed on  
the horizontal center-line (i.e., make  
a single horizontal line that is as  
white as possible.)  
6
If a vertical red line is visible, use  
the VOL + and VOL - buttons to  
move the line so that it is superim-  
posed on the vertical-center line  
(i.e., make a single vertical line that  
is as white as possible.)  
7
For Blue’ adjustment, do the same as the above.  
After the red convergence is correctly adjusted, press Menu to exit  
all the menus.  
CHAPTER THREE: TV OPERATION  
3.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
View ing the Menus and On-Screen Displays  
View ing the Menus  
The on-screen menus disappear  
from the screen after thirty seconds.  
1
Picture  
: Custom  
With the power on, press  
the Menu button.  
Mode  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
The “Picture” menu  
appears on the screen.  
Its left side has five  
icons: Picture, Sound,  
Channel, Function and  
PIP.  
: Normal  
You can also use the Menu,  
CHANNEL, and VOLUME buttons  
on the control panel of the TV to  
make selections.  
2
Press the CH  
or CH button to the move items in the menu  
(the icons blink when highlighted). Press the VOL + or VOL - button to  
display, change, or use the selected items. Press the VOL + button to  
enter items in the menu.  
3
Press the Menu button to exit.  
View ing the Display  
The display identifies the current channel and the status of certain audio-video settings.  
The on-screen displays  
1
disappear after ten seconds.  
Press the Display button on  
the remote control.  
The TV will display the chan-  
nel, the type of audio, and the  
status of certain video and  
audio settings.  
(“ ” indicates a channel has  
*
been manually fine tuned.)  
3.6  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Selecting a Menu Language  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
: English  
Press the CH button to  
select “Function”, then  
press the VOL + button.  
2
Function  
: English  
Press the CH button to  
select “Language”, then  
press the VOL + or VOL -  
button to select the lan-  
guage.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
Press the Menu button to  
exit.  
Selecting the Antenna Input  
You can connect to two different signal sources by choosing the antenna input (Antenna A or  
Antenna B).  
1
Channel  
Press the Menu button .  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
Press the CH button  
to select “Channel”,  
then press the VOL +  
button to enter.  
:
:
00  
----  
2
Channel  
Press the VOL + or VOL -  
button to select Aor “ B”.  
Antenna  
: B  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
Press the Menu button to  
exit.  
:
:
00  
----  
CHAPTER THREE: TV OPERATION  
3.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Mem orizing the Channels  
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and  
cable channels. After the available channels are memorized, use the CH  
and CH  
but-  
tons to scan through the channels. This eliminates the need to change channels by entering  
the channel digits. There are three steps for memorizing channels: selecting a broadcast  
source, memorizing the channels (automatic) and adding and deleting channels (manual).  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify the type  
of signal source that is connected to the TV (i.e., an antenna or a cable system).  
1
Channel  
Press the Menu button.  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
Press the CH button to  
select “Channel”, then  
press the VOL + button.  
:
:
00  
----  
2
Channel  
Press the CH button to  
select “ANT/CATV, then  
Press the VOL + or VOL -  
button to cycle through  
these choices:  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
ANT (antenna), STD, HRC  
or AFN.  
Note: STD, HRC and AFN identify various types of cable TV systems. Contact your local  
cable company to identify the type of cable system that exists in your particular area.  
At this point the signal source has been selected. Proceed to Storing Channels in Memory”  
(next page).  
3.8  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Storing Channels in Mem ory (Autom atic Method)  
1
Channel  
First, select the correct  
signal source (ANT, STD,  
HRC, AFN). See steps 1~2  
on previous page.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
Press the Menu button.  
Press the CH button to  
select “Channel”, then  
press the VOL + button  
2
Channel  
Press the CH  
button to  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
select “Auto Program”, then  
press the VOL + button.  
:
:
00  
----  
The TV automatically cycles  
through all of the available chan-  
nels and stores them in memory.  
This takes about one to two min-  
utes.  
3
The TV will begin  
memorizing all of the  
available channels.  
After all the available  
channels are stored, the  
Auto program menu reap-  
pears. Press the Menu  
button to exit.  
Adding and Erasing Channels (Manual Method)  
1
Use the number buttons to directly select the channel  
that will be added or erased.  
2
Press the Add/Erase button:  
Repeatedly pressing this button will alternate between  
Added” and “Erased.”  
Press the Menu button to exit.  
You can view any channel (including an erased channel) by using the number  
buttons on the remote control.  
CHAPTER THREE: TV OPERATION  
3.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Changing Channels  
Using the Channel Buttons  
Press the CH or CH button to change channels.  
When you press CH  
or CH , the TV changes channels in sequence. You will see all the chan-  
nels that the TV has memorized. (The TV must have memorized at least three channels.) You will  
not see channels that were either erased or not memorized.  
Using the Num ber Buttons  
Use the number buttons to quickly tune to any channel.  
Press the number buttons to go directly to a channel.  
For example, to select channel 27, press “2,” then “7.” The TV  
will change channels when you press the second number.  
When you use the number buttons, you can directly select channels that were either erased or not  
memorized.  
To select a channel over 100, press the +100 button. (For channel 122, press “+100,” then “2,” then  
“2.”)  
To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4,”  
press “0,” then “4.”)  
Using the Previous Channel  
Press the Pre-CH button. The TV changes to the last channel  
you were watching.  
3.10  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Selecting Your Favorite Channels  
You can store up to ten of your favorite channels for each available input source (such as TV  
and CATV). Then, when you press the Fav.CH button on the remote control, the TV displays  
only the favorite channels you previously stored, allowing you to quickly and easily find fre-  
quently watched channels.  
To Store Your Favorite Channels:  
1
Channel  
Press the Menu button.  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
Press the CH button  
to select “Channel”,  
then press the VOL +  
button.  
:
:
00  
----  
2
Channel  
Press the CH button to  
select “Fav. Channel”, then  
press the VOL + button.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
Note: Only memorized channels  
can be set as Favorite channels.  
3
Fav. Channel  
: ANT  
Press the VOL + or VOL -  
button to select the first  
channel.  
Fav. Channel  
To select more favorite  
channels, press CH or  
CH , then press VOL +  
or VOL -.  
To erase the memorized  
Favorite Channel, select  
the channel by pressing  
the VOL +/VOL - buttons  
and then press the  
Add/Erase button.  
To View Your Favorite Channels:  
Press the Fav.CH button repeatedly to jump from one favorite  
channel to another.  
CHAPTER THREE: TV OPERATION  
3.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adding and Erasing Channels (Manual Method)  
1
Channel  
Press the Menu button.  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
Press the CH button to  
select “Channel”, then  
press the VOL + button.  
:
:
00  
----  
2
Channel  
Press the CH button to  
select “Add/Erase”, then  
press the VOL + button.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
3
Add/Erase  
Press the VOL + button,  
then press CH / CH  
or number buttons to  
select the channel you  
want to add or erase.  
Press the Menu button.  
Channel  
Select  
: ANT 11  
: Erased  
4
Add/Erase  
Press the CH  
or  
Channel  
Select  
: ANT 11  
: Added  
CH button to select  
“Select”.  
Press the VOL + or VOL -  
button to select “Added”  
or “Erased”.  
Press the Menu button to exit  
the menu.  
3.12  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Labeling the Channels  
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,  
“PBS2, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-  
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear  
next to the channel number.  
1
Press CH or CH  
to tune to the channel that will be labeled.  
Note: You cannot select  
“Labeling” in the A/V mode.  
2
Channel  
Press the Menu button.  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
Press the CH button to  
select “Channel”, then  
press the VOL + button.  
:
:
00  
----  
3
Channel  
Press the CH button to  
select “Labeling”.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
Press the VOL + button to  
begin labeling.  
:
:
00  
----  
The left-most field will be  
highlighted.  
(Each label has four fields.  
See top paragraph.)  
4
Channel  
Press the CH  
or CH  
Antenna  
: A  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
button to select a letter,  
a number, or a blank.  
:
00  
(Press the CH  
or  
CH button results in this  
sequence: A,B,...Z, blank,  
0,1,...9).  
: A  
---  
5
Channel  
Press the VOL + button  
switch to the next field,  
which will be highlighted.  
Select a second letter or  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
00  
digit pressing the CH  
CH button, as above.  
Repeat the process to  
select the last two digits.  
or  
: A B C 1  
Press the Menu button to exit the menu.  
CHAPTER THREE: TV OPERATION  
3.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Picture Control  
You can use the on-screen menus to change the contrast, brightness, tint, color, and sharpness  
according to personal preference. (Alternatively, you can use one of the  
“automatic” settings. See next page.)  
Custom izing the Picture  
1
Picture  
Press the Menu button.  
Mode  
: Custom  
Adjust  
Size  
: Wide  
: Off  
The “Picture” icon will be  
highlighted, then press the  
VOL + or VOL - button repeat-  
edly, until the word “Custom”  
is selected.  
Digital NR  
Color tone  
Demonstration  
: Normal  
2
Picture  
: Custom  
Press the CH  
button to  
Mode  
select “Adjust”, then press  
the VOL + button.  
(The words Contrast,  
Brightness, Sharpness,  
Color, and Tint will appear  
on the screen.)  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Normal  
3
Adjust  
Press the VOL + button.  
(The words Contrast,  
Brightness, Sharpness,  
Color, and Tint will appear  
on the screen.) Press the  
Contrast  
Brightness  
Sharpness  
Color  
: 80  
: 50  
: 50  
: 45  
Tint  
: G 50 R: 50  
CH  
or CH button to  
select a particular item.  
After adjusting an item, the  
gauge will automatically  
disappear(after about 4 seconds).  
4
Press the VOL + or VOL -  
button to increase or  
decrease the value of a  
particular item.  
Brightness  
50  
3.14  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using Autom atic Picture Settings  
Your TV has three automatic picture settings (Dynamic, “Standard” and Movie”) that are  
preset at the factory. You can activate either Dynamic, Standard or Movie by pressing P.Mode  
(or by making a selection from the menu). Or, you can select “Custom” which automatically  
recalls your personalized picture settings.  
1
Picture  
Press the Menu button.  
Mode  
: Custom  
Adjust  
Picture icon will be high-  
lighted.  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Normal  
2
Picture  
Press the VOL + or VOL -  
button to select the  
Custom”, “Dynamic”,  
“Standard” or “Movie”  
picture setting.  
Mode  
: Dynamic  
: Wide  
: Off  
Size  
Digital NR  
Demonstration  
Alternate method:  
Simply press the P.Mode  
button on the remote  
control to select one of  
the standard picture  
settings.  
Standard  
Choose Standard for the standard factory settings.  
Choose Dynamic for viewing the TV during the day or when there is bright  
light in the room.  
Choose Movie when viewing the Movie.  
Choose Custom if you want to adjust the settings according to personal pref-  
erence (see “Customizing the Picture, page 3.14).  
CHAPTER THREE: TV OPERATION  
3.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Selecting the Color Tone  
1
Picture  
: Custom  
Press the Menu button.  
Mode  
Adjust  
Size  
: Wide  
: Off  
The “Picture” icon will  
be highlighted. Then  
press the VOL + button.  
Digital NR  
Color tone  
Demonstration  
: Normal  
2
Picture  
: Custom  
Press the CH button to  
select “Color Tone”.  
Mode  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Normal  
3
Picture  
: Custom  
Press the VOL + or VOL -  
button to select “Normal”,  
“Warm1”, “Warm2”, “Cool2”  
or “Cool1”  
Mode  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Warm1  
Press the Menu button to  
exit.  
Sound Control  
Adjusting the Volum e  
Press the VOL + or VOL - buttons to increase or decrease the volume.  
Using Mute  
At any time, you can temporarily cut off the sound using the Mute button.  
1
Press the Mute button and the sound cuts off.  
The word “Mute” will appear in the lower-left corner of the screen.  
2
To turn mute off, press the Mute button again, or simply press either  
the VOL - or VOL + button.  
3.16  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Custom izing the Sound  
The sound settings can be adjusted to suit your personal perferences.  
(Alternatively, you can use one of the automatic” settings. See next page.)  
1
Sound  
Press the Menu button.  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
Press the CH button to  
select “Sound”, the press  
the VOL + button.  
: Mono  
2
Sound  
Press the VOL + or VOL -  
button repeatedly, until the  
word “Custom” is selected.  
(When Custom is selected,  
the words “Equalizer” will  
appear on the screen.)  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
: Mono  
3
Sound  
Press the CH button to  
select “Equalizer”, then  
press the VOL+ button.  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
: Mono  
4
Equalizer  
Press the VOL + or VOL -  
button to highlight a particu-  
lar item to be changed.  
Press the CH  
or CH  
button to increase or  
decrease the value of a  
particular item.  
Press the Menu button exit.  
CHAPTER THREE: TV OPERATION  
3.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using Autom atic Sound Settings  
Your TV has four automatic sound settings (Standard,” Music,” “Movie,” and “Speech”) that  
are preset at the factory. You can activate either Standard, Music, Movie or Speech by press-  
ing the S.MODE button (or by making a selection from the menu). Or, you can select  
“Custom,” which automatically recalls your personalized sound settings.  
1
Sound  
Press the Menu button.  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
Press the CH button to  
select the “Sound”, then  
press the VOL + button.  
: Mono  
2
Sound  
Press the VOL - or VOL +  
button repeatedly to select  
the “Standard,” “Music,”  
“Movie,” “Speech” or  
Custom” sound settings.  
Mode  
:
Standard  
S. Function  
MTS  
: Mono  
Alternate method:  
Simply press the S.MODE  
button on the remote con-  
trol to select one of the  
standard sound settings.  
Standard  
Choose Standard for the standard factory settings.  
Choose Music when watching music videos or concerts.  
Choose Speech when watching a show that is mostly dialogue (i.e., news).  
Choose Movies when watching movies.  
Choose Custom to recall your personalized settings.  
3.18  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Setting the Clock  
Setting the clock is necessary in order to use the various timer features of the TV. Also,  
you can check the time while watching the TV. (Just press Display.)  
Option 1: Setting the Clock Manually  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
: English  
Press the CH button to  
select “Function”, then  
press the VOL + button.  
2
Time  
Press the CH button to  
select “Timemenu.  
Clock  
00: 00 am  
On Time  
Off Time  
Sleep Timer  
- -  
- -  
:
:
- - am Off  
- - am Off  
:
Off  
Press the VOL + button: The  
Time menu will appear on  
the screen, and “Clock” will  
be highlighted.  
Adjust  
When selecting the hours, be  
sure to select the proper time of day  
(AM or PM).  
3
Time  
Press the VOL + button  
again (the hours digits  
will be highlighted).  
Clock  
11 : 00 am  
On Time  
Off Time  
Sleep Timer  
- -  
- -  
:
:
- - am Off  
- - am Off  
:
Off  
Press the CH  
or  
CH button repeatedly  
until the correct hour  
appears.  
The time will appear every time  
you press the Display button.  
4
Time  
After the hour is entered,  
Press the VOL + button.  
(at this point the minutes  
digits will be highlighted).  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
- -  
- -  
:
:
- - am Off  
- - am Off  
:
Off  
Press the CH  
or  
CH button to select  
the correct minutes.  
After selecting the cor-  
rect minutes, press the  
VOL + button.  
Press the Menu button to  
exit.  
CHAPTER THREE: TV OPERATION  
3.19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Option 2: Using the Local PBS Channel to Autom atically Set  
the TV Clock  
1
Function  
Press the MENU.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
: English  
Press the CH button  
to select “Function”,  
then press the VOL +  
button.  
2
Function  
: English  
Press the CH button  
to select “Auto clock  
set” menu, then press  
the VOL + button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
3
Auto Clock Set  
Press the VOL + button to  
select Auto clock set  
On”.  
Auto Clock Set  
PBS Channel  
Time Zone  
DST  
: On  
: ANT 3  
: ATL.  
: No  
4
Auto Clock Set  
Press the CH button  
to select “PBS chan-  
nel”. While “PBS chan-  
nel” is selected, press  
the VOL + button to  
activate the channel-  
number field.  
Auto Clock Set  
PBS Channel  
Time Zone  
DST  
: On  
: ANT 6  
: ATL.  
: No  
Press the CH  
or  
CH button to select  
your local PBS channel.  
Press the Menu button.  
continued...  
3.20  
CHAPTER THREE: TV OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
5
Auto Clock Set  
Press the CH button to  
select “Time Zone”.  
Auto Clock Set  
PBS Channel  
Time Zone  
DST  
: On  
: ANT 3  
: EAST  
: No  
While “Time Zoneis select-  
ed, then press the VOL+ or  
VOL- to change the Time  
zone.  
Sequence: ATL., EAST, CEN.,  
MTN., PAC., ALAS., HAW.  
6
Auto Clock Set  
Press the CH button to  
select “DST(Daylight saving  
time). While “DST” is select-  
ed, press the VOL+ or VOL-  
button to indicate “Yes” or  
“No”.  
Auto Clock Set  
PBS Channel  
Time Zone  
DST  
: Off  
: ANT 3  
: ATL.  
: Yes  
The clock is set.  
Press the MENU button to exit.  
CHAPTER THREE: TV OPERATION  
3.21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fo u r  
SPECIAL FEATURES  
Fine Tuning Channels  
Use fine tuning to manually adjust a particular channel for optimal reception.  
1
Channel  
Select the appropriate  
Antenna  
: A  
channel.  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
: ANT  
:
:
00  
Press the Menu button.  
Press the CH button to  
select the “Channel”, then  
press the VOL + button.  
----  
2
Channel  
Press the CH button to  
select “Fine Tune”.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
00  
----  
After you adjust the fine tuning,  
“*” will appear when you press  
Display while watching this channel.  
3
Channel  
Press the VOL + or VOL -  
button to adjust the fine  
tuning.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
+3  
----  
4
Channel  
To store the fine tuning  
setting in the TV’s memory,  
press the CH button.  
Antenna  
: A  
: ANT  
ANT/CATV  
Auto Program  
Fav. Channel  
Fine Tune  
Add/Erase  
Labeling  
:
:
+3  
(A star icon< >will appear.)  
*
----  
To reset the fine tuning to  
“00”, press the CH button.  
Press the Menu button to exit.  
4.1  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Digital Noise Reduction  
If the broadcast signal received by your TV is weak, you can activate the Digital Noise  
Reduction feature to help reduce any static and ghosting that may appear on the screen.  
1
Picture  
Press the Menu button.  
Mode  
: Custom  
Adjust  
Size  
: Wide  
: Off  
Press the CH button  
to select “Picture”, then  
press the VOL + button.  
Digital NR  
Color tone  
Demonstration  
: Normal  
2
Picture  
: Custom  
Press the CH button to  
select “Digital NR”.  
Mode  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Normal  
3
Picture  
: Custom  
Press the VOL + or VOL -  
button to select “On”.  
Mode  
Adjust  
Size  
: Wide  
: On  
Digital NR  
Color tone  
Demonstration  
Press the Menu button to  
exit.  
: Normal  
CHAPTER FOUR: SPECIAL FEATURES  
4.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Screen Size  
Press the Aspect button to change the screen.  
Wide TV (16:9)  
Wide  
Panorama  
DVD  
Wide  
Panorama  
DVD  
4
:
Zoom  
4:3  
Cinema  
3
Cinema  
4 : 3  
Zoom  
Wide  
Panorama  
DVD  
DVD  
Wide  
Panorama  
16  
:
9
Zoom  
4:3  
Cinema  
Cinema  
4 : 3  
Zoom  
• Wide:  
Sets the picture to 16:9 wide mode.  
• Panorama: Use this mode for the wide aspect ratio of a panoramic picture.  
• DVD:  
Magnifies the size of the picture and moves the magnified picture up.  
You can also move the picture on screen pressing the CH  
or CH  
button.  
• Zoom:  
Magnifies the size of the picture on screen.  
You can also move the picture on screen pressing the CH  
or CH  
button.  
• 4:3(Normal): Sets the picture to 4:3 normal mode.  
• Cinema:  
The broadcasting signal is enlarged automatically to optimum screen size.  
The margins appear grayed.  
Notes  
• Changing the Screen size doesnt work with Component1 2(480p) signals.  
Zoom function operates only on Component 2 signals.  
• Screen size cannot be changed in the PIP mode.  
Its possible to be a little difference to perform a grey letterbox by the specification of the DVD  
or VCR Tapes.  
4.3  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the R.surf feature  
This feature allows you to set the TV to return to a particular channel after a certain amount  
of time. For example, you may be watching a channel when commercials start. You can set  
the R.Surf to 5 minutes, then switch channels. After 5 minutes, the TV will return to the  
original channel. To use the R.surf:  
1
Surf Off  
While you are watching  
the channel to which you  
want to return, press the  
R.surf button. The on-  
screen display will read  
“Surf off”.  
2
Surf 1:30  
Press the R.surf button  
again to set the timer in  
thirty second intervals,  
up to five minutes.  
3
The time you set will begin counting down on the screen. When the  
time runs out, the TV will return to the channel you were watching  
when you set the timer.  
CHAPTER FOUR: SPECIAL FEATURES  
4.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/ Off Tim er  
Before using the timer, you must  
set the TVs clock. (See “Setting the  
Clock” on page 3.19)  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
: English  
Press the CH button to  
select “Function”, then  
press the VOL + button.  
When any of the timers are set, the  
“Timer” LED will illuminate (front  
panel of TV).  
2
Time  
Press the CH button to  
select "Time", then press  
the VOL + button.  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
- -  
- -  
:
:
- - am Off  
- - am Off  
:
Off  
Adjust  
When you set the hours, make  
sure the correct time of day (AM or  
PM) appears to the left of the hour.  
3
Time  
Press the CH button to  
select "On time".  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
06 : 00 am Off  
- -  
:
- - am Off  
Off  
:
Press the VOL + button to  
select the “On time” hours.  
(The hours digits will be  
highlighted.)  
Press the CH  
or CH  
button repeatedly to select  
the appropriate hours (i.e.,  
the hour when the TV will  
turn on.)  
4
Time  
Press the VOL + button  
to select the “On time”  
minutes.  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
06 : 30 am Off  
- -  
:
- - am Off  
Off  
:
(The minutes digits will be  
highlighted.)  
Press the CH  
or CH  
Adjust  
button to select the appro-  
priate minutes.  
4.5  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
To deactivate the “On time,”  
select “Off” during this step.  
5
Time  
Press the VOL + button to  
select “On/Off.”  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
06 : 30 am On  
- -  
:
- - am Off  
Off  
:
Press the CH  
or  
CH button button to  
turn the on-timer “On.”  
(Repeatedly pressing the  
CH  
or CH button  
button will alternate  
between on and off.)  
When finished, press the  
VOL + button.  
If no function buttons  
6
(including remote control buttons or  
front panel buttons) are operated for  
three hours after the TV is turned on  
with the by “On time” feature, the  
TV will be automatically turned off.  
Time  
To set the Off time, press  
the CH button to select  
Off time.”  
Clock  
11 : 30 am  
On Time  
Off Time  
Sleep Timer  
06 : 30 am On  
- -  
:
- - am Off  
Off  
:
Press the VOL + button  
and set the hours and  
minutes. (Follow the same  
procedure as in steps 1~6  
above.)  
7
When finished setting the timer, press the Menu button to exit.  
Setting the Sleep Tim er  
The sleep timer automatically shuts off the TV after a preset time (from 10 to 180 minutes).  
After about 5 seconds, the sleep  
display will disappear from the  
screen, and the time interval will be  
set.  
1
Press the Sleep button on the remote control.  
2
Press Sleep repeatedly until the appropriate time interval  
appears (any of the preset values from “Off” to “180”).  
CHAPTER FOUR: SPECIAL FEATURES  
4.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Extra sound settings  
The following sound settings can be adjusted to suit your personal preferences.  
(Surround, Auto Volum e, Melody, BBE)  
Before using the timer, you must  
set the TVs clock. (See “Setting the  
Clock” on page 3.19)  
1
Sound  
Press the Menu button.  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
Press the CH button to  
select “Sound”, then  
press the VOL + button.  
: Mono  
When any of the timers are set, the  
“Timer” LED will illuminate (front  
panel of TV).  
2
Sound  
Mode  
: Custom  
Press the CH button to  
select "S. Function", then  
press the VOL + button.  
Equalizer  
S. Function  
MTS  
: Mono  
3
S. Function  
Surround  
Auto volume  
Melody  
: Off  
: Off  
: On  
: On  
Press the CH  
or CH  
button button to select the  
required item, the press the  
VOL + button to select “On”.  
BBE  
Press the Menu button to  
exit  
• Surround  
Your Samsung TV can create a "surround" effect such that the sound seems to come  
from all directions. Once the Surround” is set to On, the setting applies to sound  
effects such as Standard, Music, Movie and Speech.  
• Auto Volume  
Each broadcasting station has its own signal conditions, which can make it necessary  
to adjust the volume every time the channel is changed. Auto volume” lets you auto-  
matically adjust the volume of the desired channel by lowering the sound output when  
the modulation signal is high or by raising the sound output when the modulation  
signal is low.  
• Melody  
You can hear clear a melody sound when the TV is powered on or Off.  
• BBE  
BBE is a built-in effect that adds clarity, punch and dynamics to the sound.  
4.7  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Choosing a Multi-Channel Sound (MTS)  
Soundtrack  
Depending on the particular program being broadcast, you can listen to stereo, mono, or a  
Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP  
has unrelated information like news or weather.)  
Quick way to access the MTS  
menu: Just press the “MTSbutton  
on the remote control.  
1
Sound  
Press the Menu button.  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
Press the CH button to  
select “Sound”, then  
: Mono  
press the VOL + button.  
The text at the bottom of the  
menu tells you if the incoming  
audio is Stereo, SAP, or Mono.  
2
Sound  
Press the CH button to  
select “MTS”, then Press  
the VOL + or VOL - button to  
select “Mono,” “SAP,” or  
“Stereo.”  
Mode  
: Custom  
Equalizer  
S. Function  
MTS  
: Stereo  
Press the Menu button to exit  
Choose Stereo for channels that are broadcasting in stereo.  
Choose Mono for channels that are broadcasting in mono, or if you are  
having difficulty receiving a stereo signal.  
Choose SAP to listen to the Separate Audio Program, which is usually a  
foreign-language translation.  
CHAPTER FOUR: SPECIAL FEATURES  
4.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
View ing Closed Captions  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.  
These captions are usually subtitles for the hearing impaired or foreign-language trans-  
lations. All VCRs record the closed caption signal from television programs, so home-record-  
ed video tapes also provide closed captions. Most pre-recorded commercial video tapes pro-  
vide closed captions as well. Check for the closed caption symbol in your television schedule  
and on the tapes packaging:  
.
Quick way to access captions  
menu: Simply press the “Caption”  
button on the remote control:  
1
Function  
: English  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
Press the CH button to  
select “Function”, then  
press the VOL + button.  
Function  
: English  
2
Press the CH button to  
select “Caption”, then  
press the VOL + button.  
Language  
Plug & Play  
Convergence  
Caption  
Time  
Auto Clock Set  
V-Chip  
Misspellings and unusual  
characters sometimes occur dur-  
ing closed caption transmissions,  
especially those of live events.  
There may be a small delay before  
captions appear when you change  
channels. These are not malfunc-  
tions of the TV.  
Caption  
: On  
3
Press the VOL + or VOL -  
button to turn closed cap-  
tioning “on” or “off”.  
Caption  
Mode  
:
:
:
Caption  
Channels  
Field  
1
1
In caption mode, captions  
appear at the bottom of the  
screen, and they usually cover  
only a small portion of the pic-  
ture.  
Caption  
: On  
4
Caption  
Mode  
Press the CH button to  
select “Mode”, then press  
the VOL + or VOL - button to  
select “Caption” or “Text.”  
:
:
:
Text  
1
Channels  
Field  
1
In text mode, information unre-  
lated to the program, such as  
news or weather, is displayed.  
Text often covers a large portion  
of the screen.  
Different channels and fields  
display different information:  
Field 2  
carries additional information that  
supplements the information in  
Field 1. (For example, Channel 1  
may have subtitles in English,  
while Channel 2 has subtitles in  
Spanish.)  
5
Depending on the particular broadcast, it might be necessary to  
make changes to “Channels” and “Field”:  
Use the CH , CH , VOL + and VOL - buttons to make the  
changes. (Follow the same procedure as in steps 3~4 above.)  
Press the Menu button to exit.  
Note: The Caption feature doesnt work in Component1(480p, 1080i), Component2 mode.  
4.9  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
View ing Picture-in-Picture  
You can use the PIP feature to simultaneously watch two video sources.  
Note: The PIP feature does not work with Component1, Component2 mode.  
When PIP is selected in the Zoom mode, the Mode is automatically converted  
into the Normal mode.  
Activating Picture-in-Picture  
Quick way to access the PIP  
menu: Simply press the “PIP”  
button on the remote control.  
1
PIP  
Press the Menu button.  
PIP  
: Off  
Press the CH button to  
select “PIP”, then press  
the VOL + button.  
If you turn TV off while  
watching and turn it on again,  
the PIP window will disappear.  
2
PIP  
Press the VOL + or VOL -  
button to select PIP  
On”.  
PIP  
: On  
: TV  
SOURCE  
Size  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
Press the Menu button  
: ANT 4  
to exit.  
Notes  
Picture-in-Picture doesnt function when the V-chip is active.  
Screen size cannot be changed in the PIP mode.  
The PIP feature doesnt work with Component1 or Component2 signals.  
When the cable box output is connected to ANT-B, it cannot be viewed in the PIP window.  
CHAPTER FOUR: SPECIAL FEATURES  
4.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Selecting a Signal Source (Antenna or Cable) for PIP  
1
PIP  
Press the Menu button.  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Press the CH button to  
select “PIP”, then press  
the VOL + button.  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
2
PIP  
Press the CH button to  
select “ANT/CATV.”  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Swap  
If an antenna is connected,  
the setting is “ANT.”  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
If a Cable TV system is pro-  
viding the signal, press the  
VOL + or VOL - button until  
the appropriate type of  
cable system is is displayed  
(“STD,” “HRC,” or “IRC”).  
Press the Menu button to exit.  
Selecting a Signal Source (External A/ V) for PIP  
Quick way to access the signal  
1
source (PIP): Simply press the  
“Source” button on the remote  
control.  
PIP  
Press the Menu button.  
PIP  
: On  
: TV  
SOURCE  
Size  
: Large  
Press the CH button to  
select “PIP”, then press the  
VOL + button.  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
If you select “TV”, the PIP image is  
the same as the main image.  
2
PIP  
Press the CH button to  
select “SOURCE, then  
press the VOL + or VOL -  
button to cycle through all  
of the available signal  
sources:  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
TV, “Video 1”, “Video 2”,  
Video 3”, “S-Video 1”,  
and “S-Video 2”.  
Press the Menu button to  
exit.  
4.11  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Sw apping the Contents of the PIP Im age and Main Im age  
Quick way to access swapping:  
Simply press the “Swap” button on  
the remote control.  
1
PIP  
Press the Menu button.  
PIP  
: On  
: TV  
SOURCE  
Size  
: Large  
Press the CH button to  
select “PIP”, then press the  
VOL + button.  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
2
PIP  
Press the CH button to  
select “Swap,” then press  
the VOL + or VOL - button  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
The image in the PIP win-  
dow will appear on the  
main screen, and vice  
versa.  
Press the Menu button to  
exit.  
Note: When ANT-B is selected, the PIP Swap function doesnt work.  
Changing the Size of the PIP Window  
Quick way to access PIP size:  
Simply press the “Size” button on  
the remote control.  
1
PIP  
Press the Menu button.  
PIP  
: On  
: TV  
SOURCE  
Size  
Press the CH button to  
select “PIP”, then press the  
VOL + button.  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
2
PIP  
Press the CH button to  
select “Size,” then press the  
VOL + or VOL - button to  
select the “Large”, “Small”,  
“Stock Ticker”.  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
Press the Menu button to  
exit.  
CHAPTER FOUR: SPECIAL FEATURES  
4.12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the PIP Channel  
Quick way to access PIP CH:  
Simply press the (PIP) “CH” button  
on the remote control.  
1
PIP  
Press the Menu button.  
PIP  
: On  
: TV  
SOURCE  
Size  
: Large  
Press the CH button to  
select “PIP”, then press the  
VOL + button  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
2
PIP  
Press the CH button to  
select “Channel,” then  
press the VOL + or VOL -  
button to change the  
channel that appears in  
the PIP window.  
PIP  
: On  
SOURCE  
Size  
: TV  
: Large  
Swap  
ANT/CATV  
Channel  
: ANT  
: ANT 4  
Press the Menu button to  
exit.  
Note: The PIP channels are not available when RF is set to ANT-B.  
(The PIP channels link to ANT-A).  
Changing the Location (Rotating) in PIP m ode  
When you press the Locate button repeatedly, the PIP window  
moves from corner to corner on the TV screen.  
Scanning the Available Channels  
This procedure scans all of the available channels and then stores  
them in memory.  
Press the Scan button, and the memorized channels will appear in  
sequence for 2 to 3 seconds per channel.  
Press the Scan button again to stop the scanning process.  
When Scan stops, the viewing mode will return to its original set-  
ting.  
4.13  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the V-Chip  
The V-Chip feature automatically locks out programming that is deemed inappropriate for  
children. The user must first enter a PIN (personal ID number) before any of the V-Chip  
restrictions can be set up or changed.  
Note : When the V-chip feature is active, the PIP and channel-auto program features do not  
function.  
Setting Up Your Personal ID Num ber (PIN)  
Quick way to access the V-Chip  
Function  
menu: Simply press the V.Chip  
button on the remote control.  
1
Press the MENU.  
Language  
Plug & Play  
Convergence  
Caption  
: English  
Press the CH button to  
select the “Function”, then  
press the VOL + button.  
Time  
V-Chip  
2
Press the CH button to  
select the V-chip”, then  
press theVOL + button.  
The “Enter Pin” screen will  
appear. Enter your 4-digit  
PIN number,  
Note: The default PIN number for a new TV set is 0-0-0-0.”  
V-Chip  
3
After entering a valid PIN  
V-Chip Lock  
TV Guidelines  
MPAA Rating  
Change Pin  
:
No  
number, the “V-chip” screen  
will appear.  
Press the CH button and  
select “Change pin.”, then  
press the VOL + button.  
Note: If you forget the PIN,  
press the remote-control keys in the  
following sequence, which resets the  
pin to 0-0-0-0:  
4
Change Pin  
While the “Change pin”  
field is selected, press the  
VOL + button.  
Enter New Pin :  
POWER OFF MUTE 8 2 ▼  
4 POWER ON.  
The Change pin screen will  
appear. Choose any  
4-digits for your PIN and  
enter them.  
Confirm New Pin  
Confirm New Pin :  
As soon as the 4 digits are entered, the “Confirm new pin” screen  
appears. Re-enter the same 4 digits. When the Confirm screen  
disappears, your PIN has been memorized.  
Press the Menu button to exit.  
CHAPTER FOUR: SPECIAL FEATURES  
4.14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
How to Enable/ Disable the V-Chip  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
: English  
Press the CH button to  
select “Function”, then press  
the VOL + button.  
Time  
V-Chip  
2
Press the CH button to  
select “V-Chip,” then  
press the VOL + button.  
The “Enter Pin” screen will  
appear. Enter your 4-digit  
PIN number.  
3
V-Chip  
To enable the V-Chip feature,  
press the VOL + button so  
that the “V-Chip lock” field is  
Yes. (Pressing the VOL + but-  
ton will alternate between  
Yes and No.)  
V-Chip Lock  
TV Guidelines  
MPAA Rating  
Change Pin  
:
Yes  
How to Set up Restrictions Using the “TV guidelines”  
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous  
section.) Parental restrictions can be set up using either of two methods: The TV guidelines  
or the MPAA rating.  
1
Function  
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
: English  
Press the CH button  
to select “Function,”  
then press the VOL +  
button.  
Time  
V-Chip  
4.15  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
2
Press the CH button to  
select the V-Chip”, then  
press the VOL + button.  
The “Enter Pin” screen  
will appear. Enter your  
4-digit PIN number,  
V-Chip  
3
Press the CH button to  
select the “TV Guidelines”,  
then press the VOL + button.  
V-Chip Lock  
TV Guidelines  
MPAA Rating  
Change Pin  
:
No  
Note: These categories consist of  
two separate groups: TV-Y and TV-Y7  
(young children through age 7), and  
TV-G through TV-MA (everybody  
else).  
4
TV Guidelines  
The “TV Guidelines” screen  
will appear.  
Press the CH , CH  
buttons to select one of the  
six age-based categories:  
B : Blocked  
U : Unblocked  
The restrictions for these two groups  
work independently: If a household  
includes very young children as well  
as young adults, the TV guidelines  
must be set up separately for each age  
group. (See next step.)  
TV-Y  
Young children  
TV-Y7 Children 7 and over  
------------------------------------  
TV-G  
TV-PG Parent Guidance  
TV-14 Viewers 14 and over  
TV-MA Mature audience  
General audience  
5
At this point, one of the TV-Ratings is selected (blue color).  
Press the VOL + button: Depending on your existing setup, a letter “Uor “B” will start blinking.  
(U= Unblocked, B= Blocked)  
While the “U” or ”B” is red, press the CH  
or CH button to block or unblock the category.  
Press the VOL + button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters will  
blink. To exit this screen, press the Menu button again. To select a different TV-Rating, press the CH  
button and then repeat the process.  
or CH  
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change  
any of the following sub-ratings:  
FV: Fantasy violence  
D: Dialog  
L: Adult language  
S: Sexual situation  
V: Violence  
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if you  
block “TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category,  
then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA).  
The sub-ratings (D, L, S, V) work together similarly. (See next section.)  
CHAPTER FOUR: SPECIAL FEATURES  
4.16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
6
How to set the FV, D, L, S and V sub-ratings:  
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).  
Next, while the TV-Rating is selected (BLUE), repeatedly press the VOL + button. This will cycle through the avail-  
able sub-ratings (FV,L, S, D or V).  
A blinking letter (“Uor “B”) will be displayed for each sub-rating. While the “Uor “B” is blinking, press the  
CH  
or CH  
button to change the sub-rating.  
Press the VOL + button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters will  
blink. To exit this screen, press the VOL + button again. To select a different TV-Rating, press the CH  
or CH  
button and then repeat the process.  
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you block  
Lsub-rating in TV-PG, then the “Lsub-ratings in TV-14 and TV-MA will automatically be blocked.  
7
Press the Menu button three times to clear all the screens. (Or proceed to the next section, and set up additional  
restrictions based on the MPAA codes).  
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13,  
R, NC-17, X  
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,  
and its main application is for movies. (Eventually, movie videocassettes will be encoded with  
MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any programs that  
are coded with objectionable ratings (either MPAA or TV-Ratings).  
Function  
1
Press the Menu button.  
Language  
Plug & Play  
Convergence  
Caption  
: English  
Press the CH button to  
select the “Function”, then  
press the VOL + button.  
Time  
V-Chip  
4.17  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
2
Press the CH button to  
select the V-chip”, then  
press the VOL + button.  
The “Enter Pin” screen will  
appear. Enter your 4-digit  
PIN number,  
3
V-Chip  
V-Chip Lock  
TV Guidelines  
MPAA Rating  
Change Pin  
:
No  
The “V-Chip” screen will  
appear.  
Press the CH button to  
select “MPAA rating”, then  
press the VOL + button.  
G
General audience (no restrictions).  
Parental guidance suggested.  
TV Guidelines  
B/U  
4
PG  
The “MPAA rating” screen  
will appear.  
PG-13 PG-13 (Parents strongly cautioned).  
R
R (Restricted. Children under 17 should  
be accompanied by an adult).  
Repeatedly press the CH  
button to select a particular  
MPAA category.  
B : Blocked  
U : Unblocked  
General audience  
NC-17 No children under age 17.  
Pressing the CH button  
will cycle through the MPAA  
categories:  
X
X (Adults only).  
Not rated.  
NR  
While a particular category is highlighted, move the joystick to the right to activate it.  
A blinking letter (“Uor “B”) will be displayed. Press the CH  
or CH button to select “Uor”B”.  
Press the VOL + button to save the settings.  
Note: The V-Chip will automatically block any category that is “more restrictive.” For example, if you block the “PG-  
13” category, then “R,” “NC-17,” and “Xwill automatically be blocked also.  
How to Reset the TV after the V-Chip  
Blocks a Channel (“Em ergency Escape”)  
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following  
message will appear: “Excessive rating.”  
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions  
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use  
the V-Chip function for an “emergency escape”:  
Press the Menu button to display the menu. Press the CH button to select the “Function” menu and press  
the VOL + button.  
Press the CH button to select the “V-Chip” menu and press the VOL + button. Enter your PIN number, and  
press the VOL + button to temporarily disable the V-Chip Lock.  
Press the V-Chip button on the remote control. Enter your PIN number, and move the joystick to the right to  
temporarly disable the V-Chip Lock.  
CHAPTER FOUR: SPECIAL FEATURES  
4.18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
View ing the Dem onstration  
To become familiar with the various menus provided by your television, you can view  
the built-in demonstration.  
1
Picture  
Press the Menu button.  
Mode  
: Custom  
Adjust  
Size  
: Wide  
: Off  
Picture icon will be  
highlighted (blinking).  
Digital NR  
Color tone  
Demonstration  
: Normal  
2
Picture  
: Custom  
Press the CH button to  
select “Demonstration”,  
then press the VOL+ button.  
Mode  
Adjust  
Size  
: Wide  
: Off  
Digital NR  
Color tone  
Demonstration  
: Normal  
Demo Mode  
Demo Mode  
Stock Ticker  
Demo Mode  
3
DVD  
COMPONENT1  
COMPONENT2  
(COMPONENT3)  
DTV  
Each of the menu options  
is displayed in turn.  
When you wish to stop  
the demonstration, press  
any button on the remote  
control.  
3-2 Pull Down  
DVD Input  
480p,  
480i, 1080i  
Auto Identification  
Exit  
Exit  
Exit  
Demo Mode  
Demo Mode  
Demo Mode  
Infor Catcher  
Melody On/Off  
Color Tone Nomal  
:
Press the Menu button to  
exit.  
Exit  
Exit  
Exit  
Note:  
The Component3 jack is  
not available.  
Equalizer  
Demo Mode  
4.19  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Custom izing Your Rem ote Control  
Your TV comes equipped with a universal” remote control. In addition to  
controlling the TV, the universal remote can also operate most VCRs, DVDs and cable  
boxes (even if your VCR, cable box or DVD are made by manufacturers other than  
Samsung).  
Setting Up Your Rem ote Control to Operate Your VCR (or DVD)  
1
Turn off your VCR (or  
DVD.)  
The remote control has four  
“modes”: “TV, “VCR”, “Cable”  
and “DVD.” Press the “MODE”  
button to switch the remote control  
2
Press the MODE button and make sure that the VCR (or DVD) LED  
is illuminated.  
to the “VCR” (or DVD) mode.  
3
On your Samsung remote control, press Set.  
Make sure you enter 3 digits of  
the code, even if the first digit is a  
“0.”  
If more than one code listed, try the  
first one.  
4
Enter 3 digits of the VCR (or DVD) code listed on page 4.22 for  
your brand of VCR (or DVD).  
If your VCR (or DVD) does  
not turn on, repeat steps 2, 3, and  
4, but try one of the other codes  
listed for the brand of your partic-  
ular VCR (or DVD).  
5
Press the Power button on the remote control. Your VCR  
(or DVD) should turn on. If your VCR (or DVD) turns on, your  
remote control is now set correctly.  
If no other codes are listed, try  
each code, 000 through 089.  
When your remote control is  
in the “VCR” (or DVD) mode, the  
volume buttons still control your  
TVs volume.  
6
Once your remote control is set up, press the MODE button  
any time you want to use the remote to operate your VCR (or  
DVD).  
When your remote is in the “TV”  
mode, the VCR control buttons  
(PLAY, PAUSE, etc.) will still oper-  
ate your VCR.  
CHAPTER FOUR: SPECIAL FEATURES  
4.20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting Up Your Rem ote Control to Operate Your Cable Box  
1
Turn off your cable  
box.  
The remote control has four  
“modes”: “TV, “VCR,” “CABLE”  
and “DVD.”  
2
Press the MODE button and make sure that the Cable  
LED is illuminated.  
Press the “MODE” button to switch  
the remote control to the “Cable”  
mode.  
3
On your Samsung remote control, press SET.  
Make sure you enter 3 digits of  
the code, even if the first digit is a  
“0.” (If more than one code listed,  
try the first one.)  
4
Enter 3 digits of the cable box code listed below for your brand of  
cable box.  
If your cable box does not turn  
on, repeat steps 2, 3, and 4, but try  
one of the other codes listed for your  
particular brand of cable box. (If no  
other codes are listed, try each cable  
box code, 000 through 077.)  
5
Press Power. Your cable box should turn on. If your cable box turns  
on, your remote control is now “set up” correctly.  
When your remote control is  
in the “CABLE” mode, the volume  
buttons still control your TVs vol-  
ume. Also, the VCR control buttons  
(PLAY, PAUSE, etc.) will still operate  
your VCR.  
6
Once your remote control is set up, press the MODE button any time  
you want to use the remote to operate your cable box.  
4.21  
CHAPTER FOUR: SPECIAL FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
VCR Codes  
Cable Box  
Codes  
DVD Codes  
Note: The remote control might not be compatible with all DVD  
Players, VCRs, and Cable boxes.  
CHAPTER FOUR: SPECIAL FEATURES  
4.22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fiv e  
TRO UBLESHO O TING  
If the TV seems to have a problem, first try this list of possible problems and solutions. If  
none of these troubleshooting tips apply, then call your nearest service center.  
Identifying Problem s  
Problem  
Possible Solution  
Poor picture.  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the TV/Video button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
No color, wrong colors or tints.  
Picture rolls vertically.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Adjust the antenna.  
Check all wire connections.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try  
operating it again.  
Your remote control does not  
operate your TV.  
Press the “MODE” button to put your remote  
control in the TV” mode.  
The TV wont turn on.  
Make sure the wall outlet is working.  
Note  
If you watch a still image or the screen in the Normal(4:3) aspect ratio format for a  
long time, images may be burned onto the screen.  
5.1  
CHAPTER FIVE: TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cleaning and Maintaining Your TV  
With proper care, your TV unit will give you many years of service. Please follow these  
guidelines to get the maximum performance from your TV.  
Placem ent  
Do not place the TV near extremely hot, cold, humid or dusty places.  
Do not place the TV near appliances with electric motors that create magnetic fields,  
such as vacuum cleaners.  
Keep the ventilation openings clear; do not place the TV on a soft surface, such as  
cloth or paper.  
Place the TV in a vertical position only.  
Liquids  
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious  
damage.  
Cabinet  
Never open the cabinet or touch the parts inside.  
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or  
chemicals.  
Do not put heavy objects on top of the cabinet.  
Tem perature  
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,  
and allow at least two hours for moisture that may have formed inside the unit to dry  
completely.  
Using Your TV in Another Country  
If you plan to take your TV with you to a foreign country, please be aware of the different  
television systems that are in use around the world. A TV designed for one system may  
not work properly with another system due to differences in the TV channel frequencies  
Specifications  
Model  
ST-42W5P  
Voltage  
AC 100-240V  
Frequency of Operation  
Power Consumption  
Dimensions  
Weight  
60Hz  
240 Watts  
1002 x 450 x 1070 mm ; 39.4 x 17.7 x 42.1 inches  
49 Kg ; 108.0 lbs  
APPENDIX  
A.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio TV Video Accessories PAVS007 User Guide
QVS TV Converter Box CV 160 User Guide
RCA Flat Panel Television HD61THW263 User Guide
RCA Flat Panel Television RLED4250A User Guide
RedMax Trimmer BT280 User Guide
Samsung MP3 Player Model YP MT6X User Guide
Samsung Printer ML 2240 User Guide
Sapphire Audio Digital Camera Speed camera User Guide
Scag Power Equipment Lawn Mower 7630001 User Guide
Screenlife Video Games Twilight User Guide