SRP-270
SERIES
1 STATION PRINTER
Operator’s Manual
All specifications are subjected to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER 1. UNPACKING............................................................ 4
1-1. CHECKING THE CONTENTS OF THE PRINTER BOX.................................. 4
1-2. LOCATING THE PRINTER .............................................................. 4
1-3. FUNCTIONS............................................................................. 5
CHAPTER 2. CONNECTING THE CABLES ..................................... 6
2-1. CONNECTING THE AC ADAPTER TO THE PRINTER................................. 6
2-2. CONNECTING INTERFACE CABLE AND DRAWER ................................... 7
CHAPTER 3. INSTALLING THE ROLL PAPER............................... 8
3-1. RIBBON CASSETTE INSTALLATION .................................................. 8
3-2. ROLL PAPER INSTALLATION.......................................................... 9
CHAPTER 4. SETTING THE DIP SWITCHES............................... 13
CHAPTER 5. HEXADECIMAL DUMPING..................................... 16
CHAPTER 6. THE SELF TEST...................................................... 17
CHAPTER 7. CODE TABLE.......................................................... 18
CHAPTER 8. CONTROL COMMANDS LIST ................................. 25
APPENDIX A.............................................................................. 29
CONNECTORS................................................................................29
Interface Connector.................................................................30
Drawer Connector ...................................................................32
APPENDIX B.............................................................................. 33
SPECIFICATION..............................................................................33
APPENDIX C.............................................................................. 34
REMOVING JAMMED PAPER................................................................34
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Unpacking
1-1. Checking the Contents of the printer box
After unpacking the unit, check that all the necessary accessories are included in the
package.
1-2. Installing the printer
l
l
l
Avoid locations in direct sunlight or subject to excessive heat.
Avoid using or storing the printer in places subject to excessive moisture.
Do not use or store the printer in a dusty or dirty area. Avoid places subject to intense
vibration or shock.
l
l
Choose a stable and flat place for proper use of the printer.
Make sure that there is enough space around the printer so that it can be used easily.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3. Functions
l
l
l
The power switch is used to turn the printer on and off.
The FEED button is used to feed roll paper.
The POWER light (green) is on when the printer is turned on and is off when the
printer is turned off.
l
l
The ERROR light (red) is on when the printer is in error state.
The Paper Out light(red) is on when the printer is in paper end.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Connecting the cables
2-1. Connecting the AC adapter to the printer
1). Make sure that the printer is turned off.
2). CHECK the label on the AC adapter to make sure the voltage required by the AC
adapter matches that of your electrical outlet.
3). Plug the DC cord connector into the printer’s power connector.
4). Plug the AC adapter power cord into the wall outlet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2. Connecting Interface Cable and Drawer
Cable to the printer
Connect the Host Computer(POS/ECR) to the printer using an interface cable that matches the
specifications of the printer and the Host computer(POS/ECR). Be sure to use a drawer that
matches the printer's specification.
1). Turn off both the printer and the Host computer(POS/ECR).
2). Plug the serial interface cable connector into the printer’s interface connector, then
tighten the screws on both sides of the connector. In case of the parallel interface,
squeeze the wire clips on the printer together until they lock in place on both sides
of the connector.
3). Plug the drawer cable into the drawer kick-out connector on the back of the printer
next to the interface connector. Do not connect a telephone line to the drawer
kick-out connector; otherwise the printer and the telephone line may be damaged
4). Turn on the Printer and Host computer(POS/ECR).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Installing the roll paper
3-1. Ribbon Cassette Installation
1). Before inserting the ribbon cassette, turn the knob clockwise to prevent
twisting the ribbon.
2). Insert the ribbon cassette as shown below and pay particular attention to the
placement of the ribbon behind the Print Head.
3). During inserting the ribbon cassette, turn the knob clockwise again to
make sure the ribbon moves freely in the cassette.
NOTE : Malfunctions and other problems may arise if other than specified
ribbon cassettes are used in the printer. The Warranty may be
voided if other than specified ribbon cassettes are used. Contact
your dealer or place of purchase for more information about proper
ribbon cassettes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2. Roll Paper Installation
Be sure to use roll paper that matches the printer's specifications.
1). When possible, make sure that the printer has no un-printed data. This data may be
lost.
2). Open the printer cover and remove the used paper roll core if there is one.
" SRP-270 A/C : 1Ply Paper
# SRP-270 D
: 2Ply Paper
3). To use a new roll paper, unroll the paper and tear off the end of the paper correctly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4). Put the roll paper on the paper holder and insert the paper in the printer.
" SRP-270 A/C : 1Ply Paper
# SRP-270 D
: 2Ply Paper
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Insert the end of the roll paper straight into the paper inlet. The printer feeds
the paper automatically and then the printer will cut the paper
automatically(SRP-270C type series and SRP-270D type series).
Refer to the attached label inside the cover.
6). Tear off the paper as shown, if necessary.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7). Insert the end of the roll paper into the groove on the Roller-Pulley, warp the paper
around it two or three times and load the Roller-Pulley onto the groove of the
Case.
8). Push the auto-cutter cover as shown below and close the printer cover.
NOTE : Push upper face of the auto cutter cover for completely locking of it.
9). When the ERROR light is on and PAPER OUT light blinks, please press the FEED
button. After that, the printer is ready for printing.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Setting the DIP switches
The DIP switches are located on the bottom of the printer. The DIP switches are used to set the
printer to perform various functions. Follow these steps when changing DIP switch settings :
1. Turn the printer power switch off.
2. Turn the printer over and remove the dip switch cover.
3. Move the DIP switches using tweezers or another narrow-ended tool. Switches
are on when up and off when down in the figure below.
4. The new setting takes effect when you turn on the printer.
NOTE : Always change DIP switch settings when the printer is turned off.
Changes made with the power on have no effect until you turn the
printer off and then on again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial Interface (RS-232C/RS-485) Specification
DIP Switch 1 Setting
SW
1
2
3
4
5
6
7
8
FUNCTION
ON
OFF
DEFAULT
OFF
OFF
OFF
OFF
-
Emulation Selection
Refer to the following table
Auto-Cutter
FONT SPACE
Function for
service
Enable
2
Disable
3
-
Engineer
OFF
OFF
RESERVED
Emulation mode selection
SW – 1
OFF
OFF
SW – 2
OFF
ON
MODE
Epson
Citizen
Star
ON
OFF
Dip Switch 2 Setting
SW
1
2
3
4
FUNCTION
Data Receive Error
Hexadecimal dump
Hand Shaking
Word length
ON
Print ”?”
YES
XON/OFF
7 bits
OFF
Ignore
NO
DTR/DSR
8 bits
DEFAULT
OFF
OFF
OFF
OFF
5
6
Parity check
Parity selection
Enable
EVEN
Disable
ODD
OFF
OFF
7
8
OFF
OFF
Baud Rate selection
Refer to the following table
Baud rate selection
Transmission speed
SW – 7
SW – 8
1200 baud
ON
OFF
ON
ON
ON
OFF
OFF
2400 baud
4800 baud
9600 baud
OFF
NOTE : When the word length is 7 bits, you can not parity check OFF status.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Parallel/USB Interface Specification
DIP Switch 1 Setting
SW
1
2
3
4
5
6
7
8
FUNCTION
ON
OFF
DEFAULT
OFF
OFF
OFF
OFF
-
Emulation Selection
Refer to the following table
Auto-Cutter
FONT SPACE
Function for
service
Enable
2
Disable
3
-
Engineer
OFF
OFF
RESERVED
Emulation mode selection
SW – 1
OFF
OFF
SW – 2
OFF
ON
MODE
Epson
Citizen
Star
ON
OFF
Dip Switch 2 Setting
SW
1
2
3
4
5
6
7
8
FUNCTION
Reserved
Hex Dump
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
ON
-
YES
-
-
-
-
-
-
OFF
DEFAULT
OFF
-
NO
-
-
-
-
-
-
OFF
OFF
OFF
OFF
OFF
OFF
OFF
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Hexadecimal Dumping
This feature allows experienced users to see exactly what data is coming to the printer. This can
be useful in finding software problems. When you turn on the hexadecimal dump function, the
printer prints all commands and data in hexadecimal format along with a guide section to help
you find specific commands.
To use the hexadecimal dump function, follow these steps:
1. After you make sure that the printer is off.
2. Set DIP switch 2-2 On.
3. Turn on the printer, then the printer enters the hexadecimal dump mode.
4. Run any software program that sends data to the printer. The printer will print all the
codes it receives in a two-column format. The first column contains the hexadecimal
codes and the second column gives the ASCII characters that correspond to the
codes.
1B 21 00 1B 26 02 40 40
02 0D 1B 44 0A 14 1E 28
00 01 0A 41 0D 42 0A 43
. ! . . & . @ @
. . . D . . . . (
. . . A . B . C
l
l
A period(.) is printed for each code that no ASCII equivalent.
During the hex dump, all commands except DLE EOT and DLE ENQ are
disabled.
l
Insufficient print data to fill the last line can be printed by pressing the feed
button.
5. When the printing finishes, turn off the printer, and then change DIP switch 2-2 OFF.
6. Turn on the printer and then the hexadecimal mode is off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. The self test
The self-test checks whether the printer has any problems. If the printer does not function
properly, contact your dealer.
1.
2.
3.
Make sure paper roll has been installed properly.
Turn on the power while holding down the FEED button. The self-test begins.
The self-test prints the current printer status, which provides the control ROM
version and the DIP switch setting.
4.
After printing the current printer status, self-test printing will print the following,
and pause (The PAPER LED light blinks).
Self-test printing.
Please press the FEED button
5.
6.
Press the FEED button to continue printing. The printer prints a pattern using the
built-in character set.
The self-test automatically ends after printing the following.
** Character Test Completed **
The printer is ready to receive data when it completes the self-test.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Code Table
The following pages show the character code tables. To find the character corresponding to a
hexadecimal number, count across the top of the table for the left digit and count down the left
column of the table for the right digit. For example, 4A = J.
Page 0 ( PC437 : USA, Standard Europe)
( International Character Set : USA )
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 2 ( PC850 : Multilingual )
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 3 ( PC860 : Portuguese )
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 4 ( PC 863 : Canadian - French )
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 5 ( PC 865 : Nordic )
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 19 ( PC 858 : Euro )
23
Download from Www.Somanuals.com. All Manuals Search And Download.
International Character
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8. Control Commands List
EPSON mode
Control code
Hexadecimal
code
Function
<HT>
09
Horizontal tab
<LF>
0A
Print and line feed
<CR>
0D
Print and carriage return
Real-time status transmission
Real-time request to printer
Set right-side character spacing
Select print modes
<DLE> <EOT> n
<DLE> <ENQ> n
<ESC> <SP> n
<ESC> ! n
<ESC> % n
10 04 n
10 05 n
1B 20 n
1B 21 n
1B 25 n
Select/Cancel user-defined
character set
<ESC> & y c1 c2 ..
<ESC> * m nL nH ..
<ESC> - n
<ESC> 2
<ESC> 3 n
1B 26 y c1 c2
1B 2A m nL nH
1B 2D n
1B 32
Define user-defined characters
Select bit-image mode
Turn underline mode on/off
Select default line spacing
Set line spacing
1B 33 n
<ESC> <
1B 3C
Return home
<ESC> = n
<ESC> ? n
<ESC> @
1B 3D n
1B 3F n
1B 40
Set peripheral device
Cancel user-defined characters
Initialize printer
<ESC> D n1 ~ nK
<ESC> E n
<ESC> G n
<ESC> J n
<ESC> K n
<ESC> R n
1B 44 … 00
1B 45 n
1B 47 n
1B 4A n
1B 4B n
1B 52 n
Set horizontal tab position
Turn emphasized mode on/off
Turn double-strike mode on/off
Print and feed paper
Print and Reverse feed
Select an international character
set
<ESC> U n
1B 55 n
Turn unidirectional printing
mode
<ESC> a n
1B 61 n
Select justification
<ESC> c 3 n
1B 63 33 n
Select paper sensor to output
paper end signals
<ESC> c 4 n
1B 63 34 n
Select paper sensor to stop
printing
<ESC> c 5 n
<ESC> d n
<ESC> p m t1 t2
<ESC> t n
1B 63 35 n
1B 64 n
1B 70 m t1 t2
1B 74 n
Enable/Disable panel button
Print and feed n lines
Generate pulse
Select character code table
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Control code
Hexadecimal
code
Function
<ESC> r n
<ESC> m
<ESC> { n
1B 72 n
1B 6D
1B 7B n
Select print color
Execute partial cut
Turn on/off upside-down
printing mode
<ESC> e n
<GS> I n
<GS> V m
<GS> V m n
<GS> a n
1B 65 n
Print and reverse feed n lines
Transmit printer ID
Select cut mode and cut paper
1D 49 n
1D 56 m
1D 56 m n
1D 61 n
Enable/Disable Automatic status
back
<GS> r n
1D 72 n
Transmit status
CITIZEN mode
Control code
Hexadecimal
code
Function
<FF> "n"
<LF>
0C + n
OA
"n" -lines paper feed command
Paper feed command
<SO>
<SI>
<DC1>
0E
0F
11
Enlarged character command
Normal character command
Initial set command
<DC2>
<DC3>
<CAN>
12
13
18
Inverted character command
Red color print command
Clear command
<ESC> "P" "0"
<ESC> "P" "1"
<ESC> "-" "n"
<ESC> "1"
1B, 50, 00
1B, 50, 01
1B, 2D, n
1B, 31
Paper partial cut command
Paper partial cut command
Underline command
1/9 inch paper feed preset
command
<ESC> "2"
1B, 32
2/9 inch paper feed preset
command
<ESC> "C" "n"
<ESC> "f" "1"
<SUB>
<FS>
<ESC><BEL> n1
n2
1B, 43, n
1B, 66, 01
1A
Page length set command
Form feed command
Second drawer drive command
First drawer quick drive command
Drive pulse setting command for
the first drawer
1C
1B, 07, n1, n2
<BEL>
07
First drawer drive command
26
Download from Www.Somanuals.com. All Manuals Search And Download.
STAR mode
Control code
Hexadecimal
code
Function
<ESC> "C" n
<ESC> "R" n
<ESC> "M"
<SO>
1B 43 n
1B 52 n
1B 4D
0E
Set page length at n lines
Select international character set.
Select 9´ 7(Half dots) character size
Select expanded character mode
Select upside-down
<SI>
0F
<DC2>
<DC4>
12
14
Cancel upside-down character
Cancel expanded character
mode(Default setting)
<ESC> "W" "1"
<ESC> "W" <1>
<ESC> "W" "0"
<ESC> "W" <0>
<ESC> "4"
<ESC> "5"
<ESC> "E"
1B 57 31
1B 57 01
1B 57 30
1B 57 00
1B 34
1B 35
1B 45
Select expanded character mode
Cancel expanded character mode
(Default setting)
Red color print selection
Red color print deselection
Emphasized print mode selection
Emphasized print mode deselection
(Default setting)
<ESC> "F"
1B 46
<ESC> "a" n
<ESC><BEL>n1
n2
1B 61 n
1B 07 n1 n2
Feed paper n lines
Adjust drive pulse width for
peripheral unit(Default setting)
Deferred drive command "A" for
peripheral unit 1
Immediate drive command "B" for
peripheral unit 1
Immediate drive command for
peripheral unit 2
Immediate drive command for
peripheral unit 2
<BEL>
07
1C
1A
19
<FS>
<SUB>
<EM>
<CAN>
18
1B 40
Cancel print data in buffer
Initialize printer
FEED switch valid
(Default setting)
FEED switch invalid
<ESC> "@"
<ESC> "e" "0"
<ESC> "e" <0>
<ESC> "e" "1"
<ESC> "e" <1>
<ESC> U n
1B 65 30
1B 65 00
1B 65 31
1B 65 01
1B 55 n
1B 2D n
Set or Cancel uni-direction mode
Set or Cancel underline mode
<ESC> - n
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Control code
Hexadecimal
code
Function
<ESC> "z" "1"
<ESC> "z" <1>
<FF>
<ESC> d "0"
<ESC> d "1"
<ESC> "-" "1"
<ESC> "-" <1>
<ESC> "-" "0"
<ESC> "-" <0>
<ESC> "e" "1"
<ESC> "e" <1>
<ESC> "e" "0"
<ESC> "e" <0>
<ESC> "f" "1"
<ESC> "f" <1>
<ESC> "f" "0"
<ESC> "f" <0>
1B 7A 31
1B 7A 01
0C
Set 1/6 inch line feed
Page feed (form feed)
Partial cut
Partial cut
1B 64 30
1B 64 31
1B 5F 31
1B 5F 01
1B 5F 30
1B 5F 00
1B 65 31
1B 65 01
1B 65 30
1B 65 00
1B 66 31
1B 66 01
1B 66 30
1B 66 00
Select overline mode
Cancel overline mode
Set the control panel switch invalid
Set the control panel switch valid
Set the ON LINE switch invalid
Set the ON LINE switch valid
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Connectors
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface Connector
Serial Interface(RS-232C)
Pin No.
Signal name
Direction
Function
1
FG
-
Frame Ground
Transmit Data
Receive Data
2
TxD
RxD
DSR
SG
Output
Input
Input
-
3
6
Data Set Ready
Signal Ground
Data Terminal Ready
7
20
DTR
Output
Serial Communication Interface(Example)
Printer
SG
Host(DTE ex 8251)
SG
TXD
RSD
DSR
DTR
TXD
RSD
RTS
CTS
DSR
DTR
S.G
S.G
Serial Interface(RS-485)
Pin No.
Signal Name
FGND
SD2
Direction
Function
1
2
3
4
5
7
-
Frame Ground
Output
Output
Input
Input
-
Send Data
SD1
RD2
Receive Data
RD1
SGND
Signal Ground
8
DR2
DR1
CS2
CS1
Output
Same as DTR(RS-232)
9
10
11
Input
Same as DSR(RS-232)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Parallel Interface(IEEE-1284)
Pin No. Source Compatibility Nibble
Byte Mode
Mode
Mode
1
2
3
4
Host
nStrobe
Data 0 (LSB)
Data 1
HostClk
HostClk
Host / Printer
Host / Printer
Host / Printer
-
-
-
Data 0 (LSB)
Data 1
Data 2
Data 2
Host / Printer
Host / Printer
Host / Printer
Host / Printer
Host / Printer
Printer
Data 3
5
-
Data 3
6
Data 4
-
Data 4
7
Data 5
-
Data 5
8
Data 6
-
Data 6
9
Data 7 (MSB)
nAck
-
Data 7 (MSB)
PtrClk
10
PtrClk
PtrBusy
/Data3,7
11
12
13
Printer
Printer
Busy
PtrBusy
AckDataReq
Xflag
AckDataReq
/Data2,6
Perror
Xflag
/Data1,5
Printer
Host
Select
14
nAutoFd
HostBusy
NC
HostBusy
NC
15
-
-
-
NC
16
GND
FG
GND
GND
17
FG
FG
Printer
-
Logic-H
GND
18
Logic-H
GND
Logic-H
GND
19~30
31
Host
nInit
nInit
nInit
nDataAvail
/Data0,4
ND
32
Printer
nFault
nDataAvail
-
GND
33
34
35
36
ND
ND
ND
Printer
Printer
Host
DK_Status
+5V
ND
ND
nSelectIn
1284-Active 1284-Active
31
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Interface
Pin No. Signal Name Assignment Function
(Color)
Shell
Shield
VBUS
D-
Drain Wire
Red
Frame Ground
Host Power
1
2
3
4
White
Green
Black
Data Line(D-)
Data Line(D+)
Signal Ground
D+
GND
Drawer Connector
Pin No.
Signal name
Direction
1
2
3
4
5
6
Frame ground
-
Drawer kick-out drive signal 1
Drawer open/close signal
+24V
Output
Input
-
Drawer kick-out drive signal 2
Signal ground
Output
-
* SRP-270 Series Model Listing
Model Name : SRP-27xyz
x
y
z
0
5
Ivory
A
C
Basic
Blank
RS-232C
Dark Gray
Basic
S
P
U
RS-485
IEEE-1284
USB
+ Auto cutter
Basic
D
+ Auto cutter
+ Spool
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Specification
Printer
Printing method
Number of head pin
Printing direction
Lines per second
Characters per line
Ribbon type
Serial impact dot matrix
9 wires
Bi-directional
Approx. 4.6 LPS
40 (9*7), 33(9*9)
Cartridge type (ERC-38 Black/Red)
Black & Red
Approx. Black : 1.5 Million characters
Red : 0.75 Million characters
Roll paper
Ribbon
Paper
Color
Ribbon life
Paper type
Paper width
Roll diameter
Thickness
Overall dimensions
Weight
W76mm ¡ ¾0.5mm (2.99" ¡ ¾0.22")
Max. f 80mm (3.14")
0.06mm ~ 0.085mm (0.002" ~ 0.003")
120mm * 63mm * 33mm ( 4.71" * 2.47" * 1.29" )
215gr ( 0.5 lbs)
Adapter
Auto Cutter
ETC
Types
Cutter type
Cutting width
Cutting thickness
Data buffer
Overall dimension
AD-270 Free Voltage (50Hz ~ 60Hz)
Gillotine type
Max. 85 mm
Max. 0.1mm
4k bytes
SRP-270A/AS/AP/AU :
160(W)*249(D)*130(H)mm(6.3"*9.8"*5.12")
SRP-270C/CS/CP/CU :
160(W)*249(D)*149(H)mm(6.3"*9.8"*5.87")
SRP-270D/DS/DP/DU :
160(W)*294(D)*160(H)mm(6.3"*11.57"*6.3")
Weight(printer only) / Weight(with box & accessories ) :
SRP-270A TYPE : 2.2 Kg (4.9 lbs) / 3.2 Kg (7.1 lbs)
SRP-270C TYPE : 2.5 Kg (5.5 lbs) / 3.5 Kg (7.7 lbs)
SRP-270D TYPE : 2.6 Kg (5.7 lbs) / 3.6 Kg (7.9 lbs)
DC 24 V, 1.0 A
Weight
Rating
Power consumption
EMI
Standby : 8 W, Operation : 24 W
FCC class A, CE
Safety standards
Reliability
UL/CSA, TUV
Printer MCBF : 7,500,000 lines (Except print head life )
Print head life : 300,000,000 Dots
Operation temperature 0¡ É~ 40¡ É( 32¢ µ~ 104¢ µ)
Operation humidity
Storage temperature
Storage humidity
30% ~ 80%
-5¡ É~ 50¡ É( 23¢ µ~ 122¢ µ)
10% ~ 95%
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Removing Jammed Paper
1) Open the printer cover
2) Raise the auto cutter unit by lifting the knob lock.
3) Remove the ribbon cassette.
4) Loosen the manual screw.
5) Remove the head cover.
CAUTION : The printer head becomes very hot during printing.
Allow it to be cool before you reach into the printer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6) Move the print head carriage to the reverse direction of paper jam. By pushing on
the side of the print head as shown in the illustration.
7) Remove the jammed paper by rotating the paper-feed knob.
8) Replace the head cover and secure it with screw.
9) Replace the ribbon cassette and roll paper, then close the printer cover.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE : If you are troubled with reloading the paper, the cutter blade may
not be in its normal position. Insert a screw driver into the hole at
the bottom side of auto cutter unit as shown followed picture, and
turn the gear inside the cutter unit to move the cutter blade to its
normal position.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Quadra Fire Indoor Fireplace QVI 30FB S User Guide
Radio Shack Answering Machine 43 3801 User Guide
Radio Shack Telephone System 350 User Guide
RCA Flat Panel Television RCR160TKLM1 User Guide
Renesas Computer Hardware RSKM16C6NK User Guide
Riccar Air Cleaner ECOP2 User Guide
Samsung Bluetooth Headset WEP 210 User Guide
Samsung DVD Player HD950 User Guide
Sanyo Projector XP17B User Guide
Scotts Motorcycle Accessories ZX 6R 2007 08 User Guide