Download from Www.Somanuals.com. All Manuals Search And Download.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not
responsible for any changes, direct or indirect, arising from or related to use of this user’s guide.
• ML-3470D, and ML-3471ND are model names of Samsung Electronics Co., Ltd.
• Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• IBM and IBM PC are trademarks of International Business Machines Corporation.
• PCL and PCL 6 are trademarks of Hewlett-Packard company.
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation.
• PostScript 3 is a trademark of Adobe System, Inc.
• UFST® and MicroType™ are registered trademarks of Agfa division of Bayer Corp.
• TrueType, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.
Download from Www.Somanuals.com. All Manuals Search And Download.
contact SAMSUNG worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.
COUNTRY
CUSTOMER CARE CENTER
WEB SITE
COUNTRY
CUSTOMER CARE CENTER
WEB SITE
INDIA
3030 8282
1800 110011
1-800-3000-8282
www.samsung.com/in
ARGENTINE
AUSTRALIA
AUSTRIA
0800-333-3733
1300 362 603
www.samsung.com/ar
www.samsung.com/au
www.samsung.com/at
INDONESIA
ITALIA
0800-112-8888
www.samsung.com/id
www.samsung.com/it
0800-SAMSUNG (726-
7864)
800-SAMSUNG(726-7864)
1-800-234-7267
BELGIUM
BRAZIL
02 201 2418
www.samsung.com/be
www.samsung.com/br
JAMAICA
www.samsung.com/
latin
0800-124-421
4004-0000
JAPAN
0120-327-527
8000-7267
www.samsung.com/jp
www.samsung.com/lv
www.samsung.com/lt
www.samsung.com/lu
www.samsung.com/my
www.samsung.com/mx
CANADA
1-800-SAMSUNG (726-
7864)
www.samsung.com/ca
LATVIA
LITHUANIA
LUXEMBURG
MALAYSIA
MEXICO
8-800-77777
02 261 03 710
1800-88-9999
CHILE
CHINA
800-SAMSUNG (726-7864)
www.samsung.com/cl
www.samsung.com/cn
800-810-5858
400-810-5858
010-6475 1880
01-800-SAMSUNG (726-
7864)
COLOMBIA
01-8000112112
0-800-507-7267
www.samsung.com.co
COSTA RICA
www.samsung.com/
latin
NETHERLAND 0900 SAMSUNG(726-7864
S
www.samsung.com/nl
€ 0,10/min)
CZECH
REPUBLIC
800-726-786 (800 -
SAMSUNG)
www.samsung.com/cz
NEW
ZEALAND
0800 SAMSUNG (0800 726 www.samsung.com/nz
786)
Samsung Zrt., česká organizační složka, Oasis
Florenc, Sokolovská394/17, 180 00, Praha 8
NICARAGUA
00-1800-5077267
www.samsung.com/
latin
DENMARK
ECUADOR
70 70 19 70
www.samsung.com/dk
NORWAY
PANAMA
815-56 480
800-7267
www.samsung.com/no
1-800-10-7267
www.samsung.com/
latin
www.samsung.com/
latin
EL
800-6225
www.samsung.com/
latin
PHILIPPINES
POLAND
1800-10-SAMSUNG (726-
7864)
www.samsung.com/ph
www.samsung.com/pl
www.samsung.com/pt
SALVADOR
ESTONIA
800-7267
www.samsung.ee
0 801 801 881
022-607-93-33
KAZAKHSTAN 8-10-800-500-55-500
www.samsung.com/
kz_ru
PORTUGAL
80820-SAMSUNG (726-
7864)
KYRGYZSTAN 00-800-500-55-500
PUERTO RICO 1-800-682-3180
www.samsung.com/
latin
FINLAND
FRANCE
030-6227 515
www.samsung.com/fi
www.samsung.com/fr
3260 SAMSUNG
08 25 08 65 65 (€ 0,15/min)
REP.
1-800-751-2676
www.samsung.com/
latin
DOMINICA
GERMANY
01805 - SAMSUNG (726-
7864 € 0,14/min)
www.samsung.de
EIRE
0818 717 100
www.samsung.com/ie
www.samsung.ru
RUSSIA
SINGAPORE
8-800-555-55-55
GUATEMALA
HONDURAS
1-800-299-0013
800-7919267
3698 4698
www.samsung.com/
latin
1800-SAMSUNG (726-
7864)
www.samsung.com/sg
www.samsung.com/
latin
SLOVAKIA
0800-SAMSUNG (726-
7864)
www.samsung.com/sk
www.samsung.com/za
HONG KONG
HUNGARY
www.samsung.com/hk
www.samsung.com/hu
SOUTH
AFRICA
0860 SAMSUNG (724-
7864)
06-80-SAMSUNG (726-
7864)
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY
SPAIN
CUSTOMER CARE CENTER
WEB SITE
902-1-SAMSU(72678)
0771-400 200
www.samsung.com/es
www.samsung.com/se
www.samsung.com/ch
SWEDEN
SWITZERLAN
D
0800-SAMSUNG (726-
7864)
TADJIKISTAN 8-10-800-500-55-500
TAIWAN
0800-329-999
www.samsung.com/tw
www.samsung.com/th
THAILAND
1800-29-3232
02-689-3232
TRINIDAD &
TOBAGO
1-800-SAMSUNG (726-
7864)
www.samsung.com/
latin
TURKEY
U.A.E
444 77 11
www.samsung.com/tr
www.samsung.com/ae
800-SAMSUNG (726-7864)
8000-4726
U.K
0845 SAMSUNG (726-
7864)
www.samsung.com/uk
www.samsung.com/us
www.samsung.ua
U.S.A
1-800-SAMSUNG (726-
7864)
UKRAINE
8-800-502-0000
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com/
kz_ru
VENEZUELA
VIETNAM
0-800-100-5303
1 800 588 889
www.samsung.com/
latin
www.samsung.com/vn
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Special features ...................................................................................................................................................... 1.1
Printer overview ...................................................................................................................................................... 1.2
Understanding the Status LED ................................................................................................................................ 1.4
Finding more information ........................................................................................................................................ 1.4
Using control panel menus ...................................................................................................................................... 2.1
Using toner save mode ........................................................................................................................................... 2.5
Changing the font setting ........................................................................................................................................ 2.6
Printer driver features .............................................................................................................................................. 3.2
System requirements .............................................................................................................................................. 3.2
Supported operating systems ................................................................................................................................. 4.1
Configuring TCP/IP ................................................................................................................................................. 4.2
Configuring EtherTalk ............................................................................................................................................. 4.3
Restoring the network configuration ........................................................................................................................ 4.3
Loading paper ......................................................................................................................................................... 5.4
Printing a document ................................................................................................................................................ 6.1
Canceling a print job ............................................................................................................................................... 6.1
Download from Www.Somanuals.com. All Manuals Search And Download.
How to purchase ..................................................................................................................................................... 7.1
Printing information page ........................................................................................................................................ 8.1
Maintaining the toner cartridge ................................................................................................................................ 8.2
Understanding display messages ........................................................................................................................... 9.6
Toner cartridge-related messages .......................................................................................................................... 9.8
Solving print quality problems ............................................................................................................................... 9.11
Common Windows problems ................................................................................................................................ 9.13
Common PostScript problems .............................................................................................................................. 9.13
Common Linux problems ...................................................................................................................................... 9.14
Common Macintosh problems .............................................................................................................................. 9.14
Installing a memory DIMM .................................................................................................................................... 10.1
Installing a wireless network interface card ........................................................................................................... 10.2
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Adjust only those controls covered by the operating instructions.
Improper adjustment of other controls may result in damage, and may
require extensive work by a qualified service technician to restore the
machine to normal operation.
Safety and Regulatory Information
Important Precautions and Safety Information
15 Avoid using this machine during a lightning storm. There may be a
remote risk of electric shock from lightning. If possible, unplug the AC
power for the duration of the lightning storm.
When using this machine, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to people:
1
2
3
Read and understand all instructions.
16 If you continuously print multiple pages, the surface of the output tray
may become hot. Be careful not to touch the surface, and keep children
away from the surface.
Use common sense whenever operating electrical appliances.
Follow all warnings and instructions marked on the machine and in the
literature accompanying the machine.
17 The Power cord supplied with your machine should be used for safe
operation. If you are using a cord which is longer than 2 m with 110 V
4
If an operating instruction appears to conflict with safety information,
heed the safety information. You may have misunderstood the
operating instruction. If you cannot resolve the conflict, contact your
sales or service representative for assistance.
1
machine, then it should be 16 AWG or bigger.
18 SAVE THESE INSTRUCTIONS.
5
6
7
8
9
Unplug the machine from the AC wall socket before cleaning. Do not
use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
Environmental and Safety Consideration
Laser Safety Statement
Do not place the machine on an unstable cart, stand or table. It may fall,
causing serious damage.
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is
certified as a Class I laser product conforming to the requirements of IEC 825.
Your machine should never be placed on, near or over a radiator,
heater, air conditioner or ventilation duct.
Class I laser products are not considered to be hazardous. The laser system
and printer are designed so there is never any human access to laser
radiation above a Class I level during normal operation, user maintenance, or
prescribed service condition.
Do not allow anything to rest on the power cable. Do not locate your
machine where the cords will be abused by persons walking on them.
Do not overload wall outlets and extension cords. This can diminish
performance, and may result in the risk of fire or electric shock.
Warning
Never operate or service the printer with the protective cover removed from
Laser/Scanner assembly. The reflected beam, although invisible, can
damage your eyes.
10 Do not allow pets to chew on the AC power or PC interface cords.
11 Never push objects of any kind into the machine through case or
cabinet openings. They may touch dangerous voltage points, creating a
risk of fire or shock. Never spill liquid of any kind onto or into the
machine.
12 To reduce the risk of electric shock, do not disassemble the machine.
Take it to a qualified service technician when repair work is required.
Opening or removing covers may expose you to dangerous voltages or
other risks. Incorrect reassembly could cause electric shock when the
unit is subsequently used.
13 Unplug the machine from the PC and AC wall outlet, and refer servicing
to qualified service personnel under the following conditions:
• When any part of the power cord, plug, or connecting cable is damaged
or frayed.
• If liquid has been spilled into the machine.
• If the machine has been exposed to rain or water.
• If the machine does not operate properly after instructions have been
followed.
• If the machine has been dropped, or the cabinet appears damaged.
• If the machine exhibits a sudden and distinct change in performance.
1 AWG: American Wire Gauge
i
Download from Www.Somanuals.com. All Manuals Search And Download.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
Correct Disposal of This Product (Waste Electrical
& Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Radio Frequency Emissions
FCC Regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
Ozone Safety
• This device may not cause harmful interference, and
During normal operation, this machine produces ozone.
The ozone produced does not present a hazard to the
operator. However, it is advisable that the machine be
operated in a well ventilated area.
• This device must accept any interference received, including interference
that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
If you need additional information about ozone, please
contact your nearest Samsung dealer.
Power Saver
This printer contains advanced energy conservation technology that reduces
power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power
consumption is automatically lowered.
• Reorient or relocate the receiving antenna.
Recycling
• Increase the separation between the equipment and receiver.
Please recycle or dispose of packaging materials for this
product in an environmentally responsible manner.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of
the member states related to low voltage equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry
and Science Canada.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation
of the laws of the Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme
sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par
l’Industrie et Sciences Canada.
A full declaration, defining the relevant Directives and referenced standards
can be obtained from your Samsung Electronics Co., Ltd. representative.
EC Certification
United States of America
Certification to 1999/5/EC Radio Equipment & Telecommunications
Terminal Equipment Directive (FAX)
Federal Communications Commission (FCC)
This Samsung product has been self-certified by Samsung for pan-European
single terminal connection to the analogue public switched telephone
network (PSTN) in accordance with Directive 1999/5/EC. The product has
been designed to work with the national PSTNs and compatible PBXs of the
European countries:
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. This section is only applicable if
these devices are present. Refer to the system label to verify the presence of
wireless devices.
In the event of problems, you should contact the Euro QA Lab of Samsung
Electronics Co., Ltd. in the first instance.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
The product has been tested against TBR21 and/or TBR 38. To assist in the
use and application of terminal equipment which complies with this standard,
the European Telecommunication Standards Institute (ETSI) has issued an
advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The
product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.
The FCC has set a general guideline of 20 cm (8 inches) separation between
the device and the body, for use of a wireless device near the body (this does
not include extremities). This device should be used more than 20 cm (8
inches) from the body when wireless devices are on. The power output of the
wireless device (or devices), which may be embedded in your printer, is well
below the RF exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
European Radio Approval Information (for products fitted with
EU-approved radio devices)
Operation of this device is subject to the following two conditions:(1) This
device may not cause harmful interference, and(2) this device must accept
any interference received, including interference that may cause undesired
operation of the device.
This Product is a printer; low power, Radio LAN type devices (radio frequency
(RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band,
may be present (embedded) in your printer system which is intended for
home or office use. This section is only applicable if these devices are
present. Refer to the system label to verify the presence of wireless devices.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Contact manufacturer for service.
Wireless devices that may be in your system are only qualified for use in the
European Union or associated areas if a CE mark with
a Notified Body
Registration Number and the Alert Symbol is on the system label.
FCC Statement for Wireless LAN use:
The power output of the wireless device or devices that may be embedded in
you printer is well below the RF exposure limits as set by the European
Commission through the R&TTE directive.
“While installing and operating this transmitter and antenna
combination the radio frequency exposure limit of 1mW/cm2
may be exceeded at distances close to the antenna installed.
Therefore, the user must maintain a minimum distance of
20cm from the antenna at all times. This device can not be
colocated with another transmitter and transmitting
antenna.”
European States qualified under wireless approvals:
EU Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France (with frequency restrictions), Germany, Greece, Hungary, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.
Declaration of Conformity (European Countries)
EEA/EFTA countriesIceland, Liechtenstein, Norway and Switzerland
Approvals and Certifications
European States with restrictions on use:
The CE marking applied to this product symbolises
Samsung Electronics Co., Ltd. Declaration of Conformity
with the following applicable 93/68/EEC Directives of the
European Union as of the dates indicated:
EUIn France, the frequency range is restricted to 2446.5-2483.5 MHz for
devices above 10 mW transmitting power such as wireless
EEA/EFTA countriesNo limitations at this time.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will void
the authorization to use it. Please contact manufacturer for
service.
Regulatory Compliance Statements
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. The following section is a general
overview of considerations while operating a wireless device.
Only use drivers approved for the country in which the device
will be used. See the manufacturer System Restoration Kit,
or contact manufacturer Technical Support for additional
information.
Additional limitations, cautions, and concerns for specific countries are listed
in the specific country sections (or country group sections). The wireless
devices in your system are only qualified for use in the countries identified by
the Radio Approval Marks on the system rating label. If the country you will
be using the wireless device in, is not listed, please contact your local Radio
Approval agency for requirements. Wireless devices are closely regulated
and use may not be allowed.
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp
plug and has a 13 amp fuse. When you change or examine the fuse, you
must re-fit the correct 13 amp fuse. You then need to replace the fuse cover.
If you have lost the fuse cover, do not use the plug until you have another fuse
cover.
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as known at this time.
Because the wireless devices (which may be embedded into your printer)
emit less energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe for use.
Regardless of the power levels, care should be taken to minimize human
contact during normal operation.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be
suitable. However, some buildings (mainly old ones) do not have normal 13
amp plug sockets. You need to buy a suitable plug adaptor. Do not remove
the moulded plug.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm
(8 inches) from the body when wireless devices are on and transmitting.
Warning
If you cut off the moulded plug, get rid of it straight away.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed below:
Important warning: You must earth this machine.
The wires in the mains lead have the following color code:
Radio frequency wireless communication can interfere with
equipment on commercial aircraft. Current aviation
regulations require wireless devices to be turned off while
traveling in an airplane. IEEE 802.11 (also known as wireless
Ethernet) and Bluetooth communication devices are
examples of devices that provide wireless communication.
• Green and Yellow:
• Blue:
Earth
Neutral
Live
• Brown:
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
In environments where the risk of interference to other
devices or services is harmful or perceived as harmful, the
option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable
gas laden atmospheres are limited examples where use of
wireless devices may be restricted or eliminated. When in
environments where you are uncertain of the sanction to use
wireless devices, ask the applicable authority for
You must connect the green and yellow wire to the pin marked by the letter
“E” or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N”
or colored black.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
authorization prior to use or turning on the wireless device.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
Every country has different restrictions on the use of wireless
devices. Since your system is equipped with a wireless
device, when traveling between countries with your system,
check with the local Radio Approval authorities prior to any
move or trip for any restrictions on the use of a wireless
device in the destination country.
If your system came equipped with an internal embedded
wireless device, do not operate the wireless device unless all
covers and shields are in place and the system is fully
assembled.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
For the following product:
Mono Laser Printer model " ML-3471ND, ML-3470D"
Manufactured at:
of Samsung Electronics Co., Ltd.
#259, Gongdan-Dong, Gumi-City, Gyeongsangbuk-Do, 730-030 Korea
of Samsung Electronics(Shandong) Digital Printing Co., Ltd.
264209, Samsung Road, Weihai Hi-Tech IDZ, Shandong Province, China
of Weihai Shin Heung Digital Electronics Co., Ltd.
98, Samsung Road, Weihai Hi-Tech. IDZ, Shandong Province, P.R.China.
(Factory name, address)
We hereby declare, that the product above is in compliance with the essential requirements of the
R&TTE Directive (1995/5/EC) by application of:
EN 60950-1:2001+A11
EN 55022:1998 Class B
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2:2000 + A2:2005
EN 61000-3-3:1995 + A1:2001
EN 301 489-1 V1.4.1(2002-08),
EN 301 489-17 V1.2.1(2002-08)
EN 300 328 V1.7.1 (2006-10)
The Technical documentation is kept at the below Manufacturer’s address.
Manufacturer
G
G
Samsung Electronics Co., Ltd.
#259, Gongdan-Dong, Gumi-City
Gyungbuk, Korea 730-030
G
G
Sung-Hwan Baek / S. ManagerG G
Aug 18, 2008G
G
Representative in the EU:
G
G
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
G
Yong Sang Park / S. Manager
Aug 18, 2008
(Place and date of issue)
(Name and signature of authorized person)
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Save time and money
• This printer allows you to use toner save mode to
1Introduction
Congratulations on the purchase of your printer!
This chapter includes:
• You can print on both sides of the paper to save
paper. See the Software Section.
•
•
•
• You can print multiple pages on a single sheet of
paper to save paper. See the Software Section.
• You can use preprinted forms and letterhead with
plain paper. See the Software Section.
• This printer automatically conserves electricity
by substantially reducing power consumption
when not in use.
Special features
Your new printer is equipped with several special features that improve
the print quality. You can:
Expand the printer capacity
• ML-3470D has 32 MB of memory which can be
expanded to 288 MB. ML-3471ND has 64 MB of
memory which can be expanded to 320 MB. See
Print with excellent quality and high speed
• You can print up to 1200 x 1200 dpi effective
output. See the Software Section.
• ML-3471ND comes with a built-in network
interface, 10/100 Base TX.
a
• Your printer prints A4-sized paper at up to 33 ppm
and letter-sized paper at up to 35 ppm.
• You can also add an optional wireless network
interface card to ML-3471ND only.
• For duplex printing, your printer prints A4-sized
b
paper at up to 17 ipm and letter-sized paper at up
• You can add a 250-sheet optional tray 2 to your
printer. This tray lets you add paper to the printer
less often.
to 18 ipm.
Handle paper flexibly
• The multi-purpose tray supports letterheads,
envelopes, labels, transparencies, custom-sized
materials, postcards, and heavy paper. The multi-
purpose tray holds up to 50 sheets of plain paper.
• A PostScript 3 Emulation* (PS) enables PS
printing.
* Zoran IPS Emulation compatible with PostScript 3
• © Copyright 1995-2005, Zoran Corporation.
All rights reserved. Zoran, the Zoran logo,
IPS/PS3 and OneImage are trademarks of
Zoran Corporation.
• The 250-sheet tray 1 and 250-sheet optional tray 2
support plain paper in various sizes.
• Two output trays; select either the output tray (face-
down) or the rear cover (face-up) for the most
convenient access.
* 136 PS3 fonts
• Contains UFST and MicroType from Monotype Imaging Inc.
• Straight-through paper path capability from the
multi-purpose tray to the rear cover.
Print in various environments
• You can print in Windows 2000/XP/2003/Vista.
• Your printer is compatible with Linux and Macintosh.
• Your printer comes with both Parallel and USB interfaces.
Create professional documents
• Print Watermarks. You can customize your
documents with words, such as “Confidential.” See
the Software Section.
9
8
• Print Booklets. This feature enables you to easily
print a document to create a book. Once printed, all
you have to do is fold and staple the pages. See the
Software Section.
• Print Posters. The text and pictures of each page of
your document are magnified and printed across
the sheet of paper and can then be taped together
to form a poster. See the Software Section.
a. pages per minute
b. images per minute
1.1
<
Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer features
Printer overview
The table below lists a general overview of features supported by your
printer.
(I: Installed, O: Option, NA: Not Available)
Front view
Features
ML-3470D
ML-3471ND
IEEE 1284 Parallel
I
I
USB 2.0
I
I
I
Network Interface
NA
(Ethernet 10/100 Base TX)
Wireless LAN
NA
O
(IEEE 802.11 b/g Wireless
LAN)
PostScript* Emulation
I
I
I
I
a
Duplex printing
a. Printing on both sides of paper.
* The figure above shows an ML-3471ND
with all available options.
1
2
3
7
8
9
output tray
control panel
handle
multi-purpose tray
front cover
output support
multi-purpose tray
paper width guides
4
10
11
paper level indicator
multi-purpose tray
extension
5
6
optional tray 2
tray 1
1.2
<
Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear view
Control panel overview
ML-3470D and ML-3471ND
Menu: Enters Menu mode and scrolls through the available
menus.
1
2
scroll buttons: Scroll through the options available in the
selected menu, and increase or decrease values.
3
4
OK: Confirms the selection on the display.
Back: Sends you back to the upper menu level.
* The figure above shows an ML-3471ND with
Toner Save: Allows you to save on toner by using less toner
in printing.
all available options.
5
6
Duplex: Allows you to print documents on both sides of the
paper.
1
2
3
4
6
7
8
9
control board cover
duplex unit
a
network port
power receptacle
power switch
rear cover
7
8
Stop: Stops an operation at any time.
USB port
parallel port
optional tray 2 cable
connector
5
a. ML-3471ND only.
1.3
<
Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Status LED
Finding more information
You can find information for setting up and using your from the following
resources, either printed or onscreen.
Status
Description
Off
• The printer is powerd off.
Quick Install
Guide
Provides information on setting up your printer
and, therefore, be sure to follow the
instructions in the guide to get the printer
ready.
• The printer is on.
• The printer can receive data from the
computer.
On
Green
• When the backlight blinks slowly, the printer
is receiving data from the computer.
• When the backlight blinks quickly, the printer
is printing data.
Blinking
Online User’s
Guide
Provides you with step-by-step instructions for
using your printer’s full features, and contains
information for maintaining your printer,
• A paper jam has occurred. To solve the
problem, see page 9.1.
• The front cover is open. Close the front
cover.
• There is no paper in the tray. Load paper in
the tray.
troubleshooting, and installing accessories.
This user’s guide also contains the Software
Section providing you with information on how
to print documents with your printer on various
operating systems, and how to use the
supplied software utilities.
• The toner cartridge installed is not a genuine
cartridge, and you selected Stop at the
• The lifespan of the toner cartridge is
reached, and you selected Stop at the
• The printer has stopped printing due to a
major error.
On
Note
You can access the user’s guides in
other languages from the Manual
folder on the printer driver CD.
Printer Driver
Help
Provides you with help information on printer
driver properties and instructions for setting up
the properties for printing. To access a printer
driver help screen, click Help from the printer
properties dialog box.
• A minor error is occurring and the printer is
waiting for the error to be cleared. When the
problem is cleared, the printer resumes
printing.
Red
• The toner cartridge is totally exhausted.
Remove the old toner cartridge and install a
new one. See page 8.3.
Samsung website If you have Internet access, you can get help,
support, printer drivers, manuals, and order
information from the Samsung website,
• The toner cartridge installed is not a genuine
cartridge, and you selected Continue at the
• The lifespan of the toner cartridge is
reached, and you selected Continue at the
• The toner cartridge is low. Order a new
toner cartridge. You can temporarily
improve print quality by redistributing the
Blinking
1.4
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a location
Altitude adjustment
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The print quality is affected by atmospheric pressure, which is
determined by the height of the machine above sea level. The following
information will guide you on how to set your machine to the best print
quality or best quality of print.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the printer close to the
edge of your desk or table.
Before you set the altitude value, find the altitude where you are using
the machine.
Clearance space
Front: 500 mm (enough space
so that trays can be opened or
removed)
High 3
High 2
1
Back: 350 mm (enough space
to allow opening of the rear
cover or the duplex unit)
2
3
4
Right: 100 mm (enough space
for ventilation)
High 1
Left: 100 mm (enough space
to allow opening of the control
board cover)
Normal
0
1
Ensure that you have installed the printer driver with the provided
Printer Software CD.
2
Double-click the Smart Panel icon on the Windows task bar
(or Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3
4
Click Printer Setting.
Click Setting > Altitude Adjustment. Select the appropriate value
from the dropdown list, and then click Apply.
Note
IIf your machine is connected to a network, SyncThru Web
Service screen appears automatically. Click Machine Settings
> Setup (or Machine Setup) > Altitude Adj. Select the
appropriate altitude value, and then click Apply.
1.5
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu overview
2System setup
The control panel menus are used to configure the printer. The control
panel provides access to the following menus:
This chapter provides step by step information on setting up your printer.
This chapter includes:
•
•
•
•
•
•
Layout
Information
(See page 2.2.)
Orientation
Menu Map
Configuration
Demo Page
PCL Font List
PS3 Font List
EPSON Font
Simplex Margin
Duplex
Duplex Margin
Using control panel menus
Graphic
Paper
A number of menus are available to make it easy for you to change the
printer settings. The diagram on the next column shows the menus and
all of the menu items available in each menu. The items in each menu
and the options you can select are described in more detail in the tables
beginning on page 2.2.
(See page 2.3.)
Resolution
Copies
Paper Size
Paper Type
Paper Source
Tray Chaining
Darkness
Image Enhance
Accessing control panel menus
You can control your printer from the printer’s control panel. You can also
set the control panel menus while the printer is in use.
1
Press Menu until the menu you want appears on the bottom line of
the display and press OK.
Emulation
System Setup
2
Press the scroll buttons until the desired menu item appears and
press OK.
Emulation Type
Setup
Language
Power Save
Auto Continue
Altitude Adj.
Auto CR
3
4
If the menu item has sub menus, repeat step 2.
Press the scroll buttons to access the desired setting option or the
Job Timeout
Maintenance
Clear Setting
required value.
5
6
Press OK to save your selection.
An asterisk (*) appears next to the selection on the display,
indicating that it is now the default.
Network
Press Stop to return to Standby mode.
TCP/IP
After 60 seconds of inactivity (no key being pressed), the printer
automatically returns to Standby mode.
EtherTalk
Ethernet Speed
Wirelessa
Note
Clear Setting
Network Info.
Print settings made from the printer driver on a connected
computer override the settings on the control panel.
a. Available with optional wireless network interface.
2.1
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Information menu
Item
Duplex
Explanation
This menu contains printer information pages that give details about the
printer and its configuration.
To print on both sides of paper, choose the binding
edge as follows.
•
Long Edge: Flip on the long edge. Prints pages
to read like a book.
Item
Explanation
•
Short Edge: Flip on the short edge. Prints pages
to read by flipping over like a note pad.
Menu Map
The menu map shows the layout and current
settings of the control panel menu items.
2
Configuration
Demo Page
The configuration page shows the printer’s
The demo page allows you to check if your
printer properly performs printing. See
3
2
5
3
5
Long Edge in the
Landscape orientation
Long Edge in the
Portrait orientation
PCL Font List
PS3 Font List
EPSON Font
The font sample list shows all of the fonts
currently available in the selected language.
2
Layout menu
3
2
5
Use the Layout menu to define all settings relating to output.
3
5
Item
Explanation
Short Edge in the
Portrait orientation
Short Edge in the
Landscape orientation
Orientation
Choose the default orientation of the print image
on the page.
Select Off to print on one side of the paper.
Duplex
Margin
In this menu, you can set the margins for double-
sided printing. You can increase or decrease the
value in 0.1 mm increments.
Landscape
Portrait
Simplex
Margin
Set the margin of print materials for one-sided
printing. You can increase or decrease the value in
1 mm increments.
2.2
<
System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper menu
System Setup menu
Use the Paper menu to define all settings relating to print material input
and output, as well as the specific print material you are using with your
printer.
Use the System Setup menu to configure a variety of printer features.
Item
Explanation
Language
This setting determines the language of the text
that appears on the control panel display and
information printing.
Item
Copies
Explanation
Set the default number of copies by selecting any
number from 1 to 999.
Power Save
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
Paper Size
Paper Type
Select the paper size currently loaded in the tray.
Select the paper type currently loaded in the tray.
Paper
Source
Using this item, you can set which tray you want to
use.
Auto
Continue
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
• If you select Auto, the printer can automatically
determine the source.
• Off: If a paper mismatch occurs, the message
will remain on the display and the printer will
wait until you insert the correct paper.
• On: If a paper mismatch occurs, an error
message will display. The printer will wait for 20
seconds, then automatically clear the message
and continue printing.
• Select MP Tray or Manual Tray to use the multi-
purpose tray. If you select Manual Tray, you
need to press OK each time you print a page.
• Tray 2 is available only when an optional tray 2 is
installed.
Tray
Chaining
When you select any other value except Auto from
Paper Source and the selected tray is empty, the
printer automatically prints from other trays.
Altitude Adj.
Auto CR
You can optimize print quality according to your
altitude.
If this menu item is set to Off, the printer does not
work until you insert paper into the specified tray.
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Graphic menu
AA
BB
CC
AA
BB
CC
Use the Graphic menu to change settings affecting the quality of the
printed characters and images.
LF
LF+CR
Item
Explanation
Job Timeout
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
Resolution
Specify the number of dots printed per inch (dpi).
The higher the setting, the sharper printed
characters and graphics.
When a print time-out occurs, the printer prints the
page in the print buffer.
• If your print jobs are mostly text, select 600dpi-
Normal for the highest quality printing.
• Select 1200dpi-Best when your job contains
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
Darkness
You can lighten or darken the print on the page by
changing the toner density setting. The Normal
setting usually produces the best result. Use the
Light toner density setting to save toner.
Image
This item enhances the print quality.
Enhance
•
•
Normal: Doesn’t enhance the quality.
Text Enhance: Enhances letters and simple
figures.
2.3
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Explanation
Item
Explanation
Maintenance
This item allows you to maintain your printer.
Symbol
This item selects the symbol to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
•
Clean Drum: Cleans the OPC drum of the
cartridge and produces a cleaning sheet with
toner debris on it.
•
Clean Fuser: Cleans the fuser unit inside of the
printer and produces a cleaning sheet with
toner debris on it.
Point Size When you select one between PCL8 and PCL45 from
the Typeface menu, you can determine the font size by
setting the height of the characters in the font.
• CLR Empty Msg.: Prevents the Toner Low
Replace Toner message from appearing on the
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the Maintenance
menu.
Courier
This item lets you select the version of Courier font to
use.
Pitch
When you select one between PCL1 and PCL7 from
the Typeface menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
•
Supplies Life: This item allows you to check how
many pages are printed and how much toner
are left in the cartridge.
Lines
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The lines may
differ according to the paper size and printing
orientation.
Clear Setting
This menu item allows you to restore the printer’s
factory default settings.
Emulation menu
PostScript
This menu provides you with the Print PS Error menu item.
Use the Emulation menu to configure printer language emulation.
Item
Explanation
Item
Explanation
Print PS
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
Emulation
Type
The printer language defines how the computer
communicates with the printer.
If you select Auto, your printer can change the
printer language automatically.
• Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed without an
indication of the error.
Setup
language.
PCL
EPSON
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and point size.
This menu sets the EPSON emulation configuration.
Item
Font
Explanation
Item
Explanation
You can select the standard font will be used in
EPSON emulation.
Typeface
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7’s interval between letters is fixed, and
PCL8~PCL45’s interval is proportional to the font
type and point size. You can adjust the font size of
PCL1~PCL7 using the Pitch item, and
PCL8~PCL45 can do using Point Size item.
• PCL46~PCL54’s interval and point size are fixed.
Character
Set
This item allows you to select a character set of the
desired language.
Character
Tab.
This item selects the character set.
Pitch
You can determine the font size by setting the number
of characters that will print in one horizontal inch of
type.
2.4
<
System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
LPI
Explanation
Printing a demo page
You can set the number of lines printed in one vertical
inch.
Print a demo page to make sure that the printer is operating correctly.
1
2
Press Menu and then OK when Information appears.
Auto
Wrap
This item determines whether or not the printer
automatically performs line feed when the data
overflows the printable area of the print material.
Press the scroll buttons until Demo Page appears and press OK.
A demo page prints out.
Network menu(ML-3471ND only)
Changing the display language
This menu lets you configure the network interface installed in your
printer. You can reset the network interface and print a configuration
page.
To change the language that is displayed on the control panel, follow
these steps:
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Item
TCP/IP
Explanation
This item allows you to manually set the TCP/IP
addresses or receive the addresses from the
network.
2
3
Press OK when Language appears.
Press the scroll buttons to select the language you want and press
OK.
• DHCP: The DHCP server allots the IP address to
you automatically.
• BOOTP: The BOOTP server allots the IP address
to you automatically.
4
Press Stop to return to Standby mode.
• Static: You can enter IP address, subnet mask,
and gateway manually.
Using toner save mode
Toner save mode allows the printer to use less toner on each page.
Activating this mode extends the life of your toner cartridge and reduces
your cost per page beyond what one would experience in the normal
mode, but it reduces print quality.
EtherTalk
This item lets you select whether or not you use the
EtherTalk protocol. Select On to use the protocol.
Ethernet
Speed
This item allows you to select the ethernet speed.
There are two ways to enable this mode:
Wireless
Configure the wireless network environments.
Using the control panel button
Note
Press Toner Save on the control panel. The printer must be in Standby
This menu only appears when an optional
wireless network interface card has been
installed.
mode; the Status LED lights green and Ready is shown on the display.
• If the button backlight is on, the mode is enabled and the printer uses
less toner to print a page.
• If the button backlight is off, the mode is disabled and the printer prints
in normal mode.
Clear
Setting
This item performs a simple reset and restores the
factory default settings for the network
configuration. This setting will only take effect after
you have reset the printer.
From the software application
Network
Info.
This item print a page showing the network
parameters you set.
You can set toner save mode from the printer properties window on your
printer driver. See the Software Section.
2.5
<
System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the font setting
Your machine has preset the font for your region or country. If you want
to change the font which you prefer or set the font under special
condition such as the DOS environment, you can change the font setting
as follows:
1
2
3
4
5
6
7
8
Press Menu on the control panel until you see Emulation feature.
Press OK to access the font setting.
Press the left/right arrow until Setup displays.
Press the left/right arrow until PCL displays.
Press the left/right arrow until Symbol displays.
Press the left/right arrow until your preferred font displays.
Press OK.
Press Stop to return to machine ready mode.
Note
Following information shows the proper font list for
corresponding languages.
• Russian: CP866, Cyrillic
• Hebrew: 15Q, 8H, 0H (Israel only)
• Greek: GREEK, PC737
• Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI,
ISOARABIC
• OCR : OCR-A, OCR-B
2.6
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied software
3 Software overview
You must install the printer and scanner software using the supplied CDs
after you have set up your printer and connected it to your computer.
This chapter gives you an overview of the software that comes with your
printer. Further details about installing and using the software are
explained in the Software Section.
Each CD provides you with the following software:
This chapter includes:
CD
Contents
•
•
•
printer
software CD
Windows
• Printer driver: Use this driver to
take full advantage of your printer’s
features.
• Smart Panel: This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
• Printer Settings Utility: This
program is automatically installed
when you install the Smart Panel.
• PostScript Printer Description
(PPD) file: Use the PostScript
driver to print documents with
complex fonts and graphics in the
PostScript language.
• Set IP: Use this program to set your
printer’s TCP/IP addresses.
• User’s Guide in PDF
Linux
• Printer driver: Use this driver to
run your printer from a Linux
computer and print documents.
• Smart Panel: This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
Macintosh
• PostScript Printer Description
(PPD) file: Use this file to run your
printer from a Macintosh computer
and print documents.
a
• Smart Panel : This program allows
you to monitor the printer’s status
and alerts you when an error
occurs during printing.
a. Macintosh 10.3, 10.4,10.5 only.
3.1
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer driver features
System requirements
Your printer drivers support the following standard features:
• Paper source selection
Before you begin, ensure that your system meets the following
requirements:
• Paper size, orientation and media type
• Number of copies
Windows
Item
Requirements
Recommended
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
Operating Windows 2000/XP/2003/Vista
system
CPU
RAM
Windows 2000
Pentium II
400 MHz or
higher
Pentium III
933 MHz
PCL 6
PostScript
Windows Macintosh Linux
Feature
Windows
Windows XP/
2003/Vista
Pentium III
933 MHz or
higher
Pentium IV
1 GHz
Toner save
O
O
O
O
O
O
O
O
Print quality
option
Windows 2000
64 MB or more
128 MB
Poster
printing
O
O
X
X
X
Windows XP/
2003
128 MB or more 256 MB
Multiple
pages per
sheet (N-up)
O
O
O
(2, 4)
Windows Vista
Windows 2000
512 MB or more 1 GB
300 MB or more 1 GB
Free disk
space
Fit to page
printing
O
O
O
O
Windows XP/
2003
1 GB or more
5 GB
Scale printing
O
O
O
X
O
O
O
X
Windows Vista
15GB
15GB or more
Different
source for
first page
Internet
Explorer
Windows 2000/ 5.0 or higher
XP/2003
Windows Vista
7.0 or higher
Watermark
Overlay
O
O
X
X
X
X
X
X
Note
For Windows 2000/XP/2003/Vista, users with administrator
privileges can install the software.
3.2
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux
Item
Requirements
• Red Hat 8.0 ~ 9.0
Operating system
• Fedora Core 1 ~ 4
• Mandrake 9.2 ~ 10.1
• SuSE 8.2 ~ 9.2
Processor
RAM
Pentium IV 1 GHz or higher
256 MB or higher
Free disk page
Software
1 GB or higher
• Linux Kernel 2.4 or higher
• Glibc 2.2 or higher
• CUPS
• SANE
Macintosh
Item
Operating system
RAM
Requirements
Macintosh 8.6 ~ 9.2 and 10.1 ~ 10.5
128 MB
Free disk space
Connection
200 MB
USB interface, Network interface
3.3
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported operating systems
4 Network setup(ML-3471ND only)
The following table shows the network environments supported by the
printer:
This chapter gives you step-by-step instructions for setting up your
printer for network connections.
This chapter includes:
Item
Requirements
• 10/100 Base-TX
•
•
•
•
•
•
•
•
Network interface
• IEEE 802.11 b/g Wireless LAN (optional)
Network operating
system
• Windows 2000/XP/2003/Vista
• Various Linux OS
• Macintosh OS 8.6 ~ 9.2 and 10.1 ~ 10.5
Using SetIP program
Network protocols
• TCP/IP on Windows
• EtherTalk
Dynamicaddressing • DHCP, BOOTP
server
Introduction
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Once you have connected your printer to a network with an RJ-45
Ethernet cable, you can share the printer with other network users.
You need to set up the network protocols on the printer to use it as your
network printer. Protocols can be set up by the following two methods:
Via network administration programs
You can configure your printer’s print server settings and manage the
printer via the following programs that came with your printer:
• SyncThru™ Web Admin Service: Web-based printer management
solution for network administrators. SyncThru™ Web Admin
Service provides you with an efficient way of manageing network
devices and lets you remotely monitor and troubleshoot network
machines from any sith with corporate internet access. Download this
• SyncThru™ Web Service: A web server embedded to your network
print server, which allows you to configure the network parameters
necessary for the printer to connect to various network environments.
• SetIP: Utility program allowing you to select a network interface and
manually configure the IP addresses for use with the TCP/IP protocol.
See Using SetIP program on page 4.2.
Via the control panel
You can set up the following basic network parameters through the
printer’s control panel:
• Configure TCP/IP
• Configure EtherTalk
4.1
<Network setup(ML-3471ND only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring TCP/IP
Using SetIP program
Your printer can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
This program is for the network IP setting using the MAC address which
is the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs
at the same time.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
1
2
Insert the driver CD provided along with your machine.
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address
is assigned automatically by the server.
Start Windows Explorer and open the X drive. (X represents your
CD-ROM drive.)
Note
Before configuring TCP/IP, you need to set the network
protocol to TCP/IP.
3
4
5
6
Double click Application > SetIP.
Open the language folder you want to use.
Double click Setup.exe to install this program.
Static addressing
To enter a TCP/IP address from your printer’s control panel, take the
following step:
From the Windows Start menu, select Programs > Samsung
Network Printer Utilities > SetIP.
1
Press Menu until Network appears on the bottom line of the
display and press OK
7
Select the name of your printer and click "
".
.
Note
2
3
4
5
Press OK when TCP/IP appears.
If you cannot find your printer name click "
list.
" to refresh the
Press the scroll buttons until Static appears and press OK.
Press OK when IP Address appears.
8
Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click Apply.
Set the first byte between 0 and 255 using the scroll buttons and
press OK to move to the next byte.
Note
If you do not know the network card's MAC address, print the
machine's network information report.
Repeat this to complete the address from the 1st byte to the 4th
byte.
9
Click OK to confirm the settings.
6
7
When you have finished, press OK.
10 Click Exit to close the SetIP program.
Repeat step 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
Note
If you are in a non-static IP address environment and need to
setup a DHCP network protocol, go to the http://
developer.apple.com/networking/bonjour/download/,
select the program Bonjour for Windows due to your
computer operating system, and install the program. This
program will allow you to fix the network parameter
automatically. Follow the instruction in the installation window.
This program does not support Linux.
8
Press Stop to return to Standby mode.
Dynamic addressing (BOOTP/DHCP)
To have a TCP/IP address assigned automatically by the server, take the
following step:
1
Press Menu until Network appears on the bottom line of the
display.
2
3
Press OK when TCP/IP appears.
Press the scroll buttons until DHCP or BOOTP appears and press
OK
.
4
Press Stop to return to Standby mode.
4.2
<
Network setup(ML-3471ND only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring EtherTalk
EtherTalk is AppleTalk used in an Ethernet network. This protocol is
widely used in Macintosh network environments. To use EtherTalk, take
the following step:
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
3
4
Press the scroll buttons until EtherTalk appears and press OK.
Press the scroll buttons until On appears and press OK.
Press Stop to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
2
3
4
Press Menu until Network appears on the bottom line of the
display and press OK.
Press the scroll buttons until Ethernet Speed appears and press
OK.
Press the scroll buttons until the speed you want appears and
press OK.
Press Stop to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
3
4
Press the scroll buttons until Clear Setting appears and press OK.
Press OK when Yes appears to restore the network configuration.
Power the printer off and back on.
Printing a network configuration page
The network configuration page shows how the network interface card
on your printer is configured.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
3
Press the scroll buttons until Network Info appears and press OK.
Press OK when Yes appears.
The network configuration page prints out.
4.3
<Network setup(ML-3471ND only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting print media
5 Loading print media
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the
guidelines for use with your printer. Print media that does not meet the
guidelines outlined in this user’s guide may cause the following
problems:
This chapter will help you understand types of paper you can use with
your printer and how to properly load paper in the different paper trays
for the best print quality.
This chapter includes:
• Poor print quality
•
•
•
• Increased paper jams
• Premature wear on the printer.
Properties, such as weight, composition, grain, and moisture content,
are important factors that affect the printer’s performance and the output
quality. When you choose print materials, consider the following:
• Desired outcome: The print media you choose should be appropriate
for your project.
• Size: You can use any size media that fits easily within the paper
adjusters of the paper tray.
• Weight: Your printer supports print media weights as follows:
2
- 16 to 24 lb bond (60 to 90 g/m ) for the tray 1 and optional tray 2
2
- 16 to 43 lb bond (60 to 163 g/m ) for the multi-purpose tray
2
- 20 to 24 lb (75 to 90 g/m ) for the duplex printing
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
Notes
• Some print media may meet all of the guidelines in this
section and still not produce satisfactory results. This may be
the result of improper handling, unacceptable temperature
and humidity levels, or other variables over which Samsung
has no control.
• Before purchasing large quantities of print media, ensure that
it meets the requirements specified in this user’s guide.
Caution
Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not
covered by Samsung’s warranty or service agreements.
5.1
<
Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported sizes of paper
a
b
Type
Size
Dimensions
Weight
Capacity
2
2
Letter
215.9 x 279 mm (8.5 x 11 inches)
215.9 x 355.6 mm (8.5 x 14 inches)
216 x 330 mm (8.5 x 13 inches)
215 x 340 mm (8.5 x 13.5 inches)
210 x 297 mm (8.27 x 11.69 inches)
182 x 257 mm (7.18 x 10.12 inches)
176 x 250 mm (6.93 x 9.84 inches)
184.2 x 266.7 mm (7.25 x 10.5 inches)
148.5 x 210 mm (5.85 x 8.27 inches)
105 x 148.5 mm (4.13 x 5.85 inches)
98.4 x 190.5 mm (3.88 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.38 x 9.02 inches)
114 x 162 mm (4.49 x 6.38 inches)
Refer to the Plain paper section
• 60 to 90 g/m (16 to 24 lb
• 250 sheets of 80 g/m
bond ) for the tray
• 60 to 163 g/m (16 to 43 lb
bond ) for the multi-
purpose tray
(21 lb bond) paper for the
tray
• 50 sheets for the multi-
purpose tray
Legal
2
Folio
Oficio
A4
Plain paper
JIS B5
ISO B5
Executive
A5
A6
Envelope Monarch
Envelope COM-10
Envelope DL
Envelope C5
Envelope C6
Letter, A4
2
5 sheets of 75 g/m (20 lb) in
the multi-purpose tray
2
Envelope
75 to 90 g/m (20 to 24 lb)
2
Transparency
Labels
138 to 146 g/m
Letter, Legal, Folio,
Oficio, A4, JIS B5,
ISO B5, Executive,
A5, A6
2
Refer to the Plain paper section
Refer to the Plain paper section
120 to 150 g/m (32 to 40 lb)
1 sheet for manual feeding in
the multi-purpose tray
Letter, Legal, Folio,
Oficio, A4, JIS B5,
ISO B5, Executive,
A5, A6
2
Card stock
105 to 163 g/m (28 to 43 lb)
2
2
Minimum size (custom)
Maximum size (custom)
76 x 127 mm (3 x 5 inches)
60 to 163 g/m
5 sheets of 75 g/m (20 lb) in
(16 to 43 lb bond )
the multi-purpose tray
215.9 x 356 mm (8.5 x 14 inches)
a. If media weight is over 24 lb (90 g/m2), use the multi-purpose tray.
b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
Note
For duplex printing, A4, Letter, Oficio, Legal, and Folio sizes are supported.
5.2
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for special print media
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials,
keep these guidelines in mind:
Media type
Guidelines
• Successful printing on envelopes depends upon
the quality of the envelopes. When selecting
envelopes, consider the following factors:
• Always use print media that conform with the specifications listed on
• Attempting to print on damp, curled, wrinkled, or torn paper can cause
paper jams and poor print quality.
- Weight: The weight of the envelope paper
should not exceed 90 g/m2 (24 lb) or jamming
may occur.
• For the best print quality, use only high quality copier grade paper
specifically recommended for use in laser printers.
- Construction: Prior to printing, envelopes
should lie flat with less than 6 mm
• Avoid using the following media types:
- Paper with embossed lettering, perforations, or a texture that is too
smooth or too rough
(0.25 inches) curl, and should not contain air.
- Condition: Envelopes should not be wrinkled,
nicked, or otherwise damaged.
- Erasable bond paper
- Multi-paged paper
- Temperature: You should use envelopes that
are compatible with the heat and pressure of
the printer during operation.
• Use only well-constructed envelopes with sharp
and well creased folds.
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper.
• Use of these types of paper could result in paper jams, chemical
smells, and damage to your printer.
• Do not use stamped envelopes.
• Store print media in its ream wrapper until you are ready to use it.
Place cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture or other conditions that can
cause it to wrinkle or curl.
• Do not use envelopes with clasps, snaps,
windows, coated lining, self-adhesive seals, or
other synthetic materials.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope
extends all the way to the corner of the
envelope.
o
o
• Store unused print media at temperatures between 15 C and 30 C
Envelopes
o
o
(59 F to 86 F). The relative humidity should be between 10% and
70%.
• Store unused print media in a moisture-proof wrap, such as a plastic
container or bag, to prevent dust and moisture from contaminating
your paper.
Acceptable
• Load special media types one sheet at a time through the multi-
purpose tray to avoid paper jams.
• To prevent print media, such as transparencies and label sheets, from
sticking together, remove them as they print out.
Unacceptable
• Envelopes with a peel-off adhesive strip or with
more than one flap that folds over to seal must
use adhesives compatible with the printer’s
fusing temperature of 200° C (392° F) for
0.1 second. The extra flaps and strips might
cause wrinkling, creasing, or jams, and may
even damage the fuser.
• For the best print quality, position margins no
closer than 15 mm (0.6 inches) from the edges
of the envelope.
• Avoid printing over the area where the
envelope’s seams meet.
5.3
<
Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Media type
Guidelines
Media type
Guidelines
• To avoid damaging the printer, use only
transparencies designed for use in laser printers.
• Transparencies used in the printer must be able
to withstand 200° C (392° F), the printer’s fusing
temperature.
• Letterhead must be printed with heat-resistant
ink that will not melt, vaporize, or release
hazardous emissions when subjected to the
printer’s fusing temperature of 205° C (400° F)
for 0.1 second.
• Place them on a flat surface after removing them
from the printer.
• Letterhead ink must be non-flammable and
should not adversely affect printer rollers.
• Forms and letterhead should be sealed in a
moisture-proof wrapping to prevent changes
during storage.
• Before you load preprinted paper, such as forms
and letterhead, verify that the ink on the paper is
dry. During the fusing process, wet ink can come
off preprinted paper, reducing print quality.
Preprinted
paper
• Do not leave them in the paper tray for long
periods of time. Dust and dirt may accumulate
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,
handle them carefully.
• To avoid fading, do not expose printed
transparencies to prolonged sunlight.
• Ensure that transparencies are not wrinkled,
curled, or have any torn edges.
Transparencies
Loading paper
• To avoid damaging the printer, use only labels
designed for use in laser printers.
• When selecting labels, consider the following
factors:
Load the print media you use for the majority of your print jobs in the tray
1. The tray 1 can hold a maximum of 250 sheets of 21 lb plain paper.
- Adhesives: The adhesive material should be
stable at 200° C (392° F), the printer’s fusing
temperature.
You can purchase an optional tray (tray 2) and attach it below the
standard tray to load an additional 250 sheets of paper. For order
information for an optional tray, see page 7.1.
- Arrangement: Only use labels with no exposed
backing between them. Labels can peel off
sheets that have spaces between the labels,
causing serious jams.
The paper level indicator on the front of the tray 1 and the optional tray
2 shows the amount of paper currently left in the tray. When the tray is
empty, the indicator bar appears at the bottom.
- Curl: Prior to printing, labels must lie flat with
no more than 13 mm (5 inches) of curl in any
direction.
Labels
- Condition: Do not use labels with wrinkles,
bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive
material between labels. Exposed areas can
cause labels to peel off during printing, which
can cause paper jams. Exposed adhesive can
also cause damage to printer components.
• Do not run a sheet of labels through the printer
more than once. The adhesive backing is
designed for only a single pass through the
printer.
Full
Empty
• Do not use labels that are separating from the
backing sheet or are wrinkled, bubbled, or
otherwise damaged.
• Do not print on media smaller than 76 mm
(3 inches) wide or 127 mm (5 inches) long.
• In the software application, set margins at least
6.4 mm (0.25 inches) away from the edges of
the material.
Card stock or
custom-sized
materials
5.4
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Press and hold the guide lock, and slide the paper length guide to
locate it in the correct paper size slot.
Using the tray 1 or the optional tray 2
Use the print material you use for the majority of your print jobs in the
tray 1. The tray 1 can hold a maximum of 250 sheets of 80 g/m paper.
2
You can purchase an optional tray 2 and attach it below the tray 1 to load
an additional 250 sheets of paper.
To load paper, pull open the tray and load paper with the side to be
printed on face down.
2
After inserting paper into the tray, adjust the support guide so that it
lightly touches the paper stack.
You can load letterhead paper with the design side face down. The top
edge of the sheet with the logo should be placed at the front of the tray.
Notes
• If you experience problems with paper feed, place one sheet
at a time in the multi-purpose tray.
• You can load previously printed paper. The printed side
should be facing up with an uncurled edge at the front. If you
experience problems with paper feed, turn the paper around.
Note that the print quality is not guaranteed.
Changing the size of the paper in the tray 1
To load longer sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
3
Squeeze the paper width guides, as shown and slide them to the
stack of paper until it lightly touches the side of the stack.
3
1
2
4
paper length guide
support guide
1
2
3
4
guide lock
paper width guides
5.5
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
3
Load the paper with the side to be printed on facing up.
• Do not push the paper width guide far enough to cause the
material to warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
Using the multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material,
such as transparencies, postcards, note cards, and envelopes. It is
useful for single page printing on letterhead or colored paper.
Depending on the media type you are using, keep the following
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left
side. If you need to do the printing job with a wrinkled envelopes,
each side down.
To load paper in the multi-purpose tray:
1
Open the multi-purpose tray and unfold the multi-purpose tray
extension, as shown.
1
1
pressure lever
2
If you are using paper, flex or fan the edge of the paper stack to
separate the pages before loading.
• Transparencies: Print side up and the top with the adhesive strip
entering the printer first.
• Labels: Print side up and top short edge entering the printer first.
• Preprinted paper: Design side up with the top edge toward the
printer.
• Card stock: Print side up and the short edge entering the printer
first.
For transparencies, hold them by the edges and avoid touching the
print side. Oils from your fingers can cause print quality problems.
• Previously printed paper: Previously printed side down with an
uncurled edge toward the printer.
Note
Make sure that you have not loaded too much print material.
The print material buckles if you load a stack that is too deep or
if you push it in too far.
Caution
When you print on special material like envelopes, labels,
transparencies, or cards, the output location should be the
5.6
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Squeeze the multi-purpose tray paper width guides and adjust
them to the width of the paper. Do not force too much, or the paper
will be bent, which will result in a paper jam or skew.
1
Load the paper with the side to be printed on facing up.
2
Squeeze the multi-purpose tray paper width guides and adjust
them to the width of the paper. Do not force too much, or the paper
will be bent, which will result in a paper jam or skew.
5
6
When you print a document, set the paper source and type in the
software application. See the Software Section.
For information about setting the paper source and type on the
control panel, see page 2.3.
After printing, fold the multi-purpose tray extension and close the
multi-purpose tray.
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in
the multi-purpose tray. This also applies to other types of print media.
• Print media should be loaded face up with the top edge going into the
multi-purpose tray first and be placed in the center of the tray.
jams and print quality problems.
3
4
When you print a document, set the paper source to Manual Feed
and select the appropriate paper size and type in the software
application. See the Software Section.
• Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
Print a document.
• When you print on 76 mm x 127 mm (3 x 5 inches) sized media on
the multi-purpose tray, open the rear cover for straight paper path to
avoid paper jams.
The display shows a message prompting you to load paper and
press OK.
• Make sure to open the rear cover when you print on transparencies. If
not, they may tear while exiting the printer.
5
Press Stop.
The printer picks up the print material and prints. After one page is
printed, the message appears again.
Using manual feed mode
Note
You can manually load a sheet of print material in the multi-purpose tray
if you select Manual Feed in the Source option from the Paper tab when
you change print settings to print a document. See the Software
Section. Manually loading paper can be helpful when you want to check
the print quality after each page is printed.
If you do not press the button, after a pause the printer will
automatically pick the print material.
6
Insert the next sheet into the multi-purpose tray and press Stop.
Repeat this step for every page to be printed.
This loading procedure is almost the same as the procedure for loading
in the multi-purpose tray, except you load paper sheet-by-sheet in the
tray, send print data to print the first page, and press OK on the control
panel to print each following page.
5.7
<Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to the rear cover (Face up)
Selecting an output location
Using the rear cover, paper comes out of the printer face up.
The printer has two output locations; the rear cover (face up) and the
output tray (face down).
Printing from the multi-purpose tray to the rear cover provides a straight
paper path. Using the rear cover might improve the output quality with
special print media.
To use the rear cover, open it by pulling down.
1
2
rear cover
output tray
1
2
The printer sends output to the output tray by default. To use the output
tray, make sure that the rear cover is closed.
Notes
• If paper coming out of the output tray has problems, such as
excessive curl, try printing to the rear cover.
Caution
• To avoid paper jams, do not open or close the rear cover while
the printer is printing.
The fuser area inside the rear cover of your printer becomes
very hot when in use. Take care when you access this area.
Printing to the output tray (Face down)
The output tray collects paper face down, in the order in which the sheets
were printed. The tray should be used for most print jobs.
5.8
<
Loading print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a document
6Basic printing
This printer allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary
depending on the application you use.
This chapter explains common printing tasks.
This chapter includes:
•
•
For details about printing, see the Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the
printer group in Windows, delete the job as follows:
1
2
Click the Windows Start button.
For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel -> Hardware and Sound
-> Printers.
3
4
Double-click the Samsung ML-3470 Series icon.
From the Document menu, select Cancel (Windows 2000/XP/2003/
Vista).
Note
You can access this window simply by double-clicking the
printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing Stop on the control
panel of your printer.
6.1
<
Basic printing>
Download from Www.Somanuals.com. All Manuals Search And Download.
How to purchase
7 Ordering supplies and
accessories
This chapter provides information on purchasing toner cartridges and
accessories available for your printer.
To order Samsung-authorized supplies or accessories, contact your
local Samsung dealer or the retailer where you purchased your printer,
information on calling for technical support.
•
•
•
Toner cartridges
When the toner runs out, you can order the following types of toner
cartridges for your printer:
a
Type
Standard yield
High yield
Yield
4,000 pages
10,000 pages
Part number
ML-D3470A
ML-D3470B
a. Declared yield value in accordance with ISO/IEC 19752
Accessories
You can purchase and install accessories to enhance your printer’s
performance and capacity.
The following accessories are available for your printer:
Accessory
Description
Part number
ML-S3050A
Optional
tray
If you are experiencing
frequent paper supply
problems, you can attach an
additional 250 sheet tray.
You can print documents on
various sizes and types of
print materials.
Memory
DIMM
Extends your printer’s
memory capacity.
• ML-00MB: 32 MB
• ML-00MC: 64 MB
• ML-00MD: 128 MB
• ML-MEM140:
256 MB
IEEE 802.11 Allows you to connect your
ML-NWA10L
b/g Wireless printer to a wireless network
a
LAN card
and share it with other
people over the network.
(ML-3471ND only)
a. Depending on your country, wireless LAN cards may not be available. Contact
your local Samsung dealer or the retailer where you bought your printer.
7.1
<
Ordering supplies and accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the inside of the printer
8Maintenance
There are two methods to clean the inside of the printer:
• Clean the inside manually.
This chapter provides information for maintaining your printer and the
toner cartridge, as well as suggestions for high-quality and economical
printing.
• Print a cleaning sheet, which can be done from the control panel.
Cleaning the inside of the printer manually
This chapter includes:
•
•
•
•
1
Turn the printer off and unplug the power cord. Wait for the printer
to cool down.
2
Open the front cover and pull the toner cartridge out. Set it on a
clean flat surface.
Printing information page
From the printer’s control panel, you can print pages that give detailed
information about the printer. They can be help you maintain your printer.
1
Press Menu until Information appears on the bottom line of the
display and press OK.
2
Press the scroll buttons until the information page you want
appears and press OK.
A page prints out.
Cautions
• To prevent damage to the toner cartridge, do not expose it
to light for more than a few minutes. Cover it with a piece of
paper, if necessary.
Cleaning the printer
During the printing process, paper, toner, and dust particles can
accumulate inside the printer. This buildup can cause print quality
problems, such as toner specks or smearing. Your printer has a cleaning
mode that can correct and prevent these types of problems.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
3
With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.
Cleaning the outside of the printer
Clean the cabinet of the printer with a soft, lint-free cloth. You can
dampen the cloth slightly with water, but be careful not to let any water
drip onto or into the printer.
Caution
If your machine or its surrounding is contaminated with toner,
we recommend you to use a cloth or tissue dampened with
water to clean it. Toner blown into the air by a vacuum cleaner
maybe harmful.
Caution
Cleaning the cabinet of the printer with cleaning materials
containing large amounts of alcohol, solvents, or other strong
substances can discolor or crack the cabinet.
Caution
While cleaning the inside of the printer, be careful not to touch
the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print scan quality problems.
8.1
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Locate the long strip of glass (LSU) inside the top of the cartridge
compartment, and gently swab the glass with a cotton swab
checking to see if dirt turns the cotton black.
• To prevent damage to the toner cartridge, do not expose it to light for
more than a few minute.
Expected cartridge life
The life of the toner cartridge depends on the amount of toner that print
jobs require. When printing text at 5% coverage, the toner cartridge
lasts an average of either 10,000 or 4,000 pages. (The original toner
cartridge supplied with the printer lasts an average of 4,000 pages;
however, it varies depending on the product configuration.) The actual
number may also be different depending on the print density of the
pages you print on, and the number of pages may be affected by
operating environment, printing interval, media type, and media size. If
you print a lot of graphics, you may need to change the cartridge more
often.
Your machine sets the toner remains in 3 levels, Toner Low, Replace
Toner, and Toner Exhausted. The machine is designed to detect the
toner remains and stop printing when the level is Toner Exhausted, for
preventing your machine from severe contamination or malfunction.
5
6
Reinsert the toner cartridge and close the front cover.
Plug in the power cord and turn the printer on.
Printing a cleaning sheet
Saving Toner
If you are experiencing blurred, faded, or smeared printouts, you can
clear the problem by printing a cleaning sheet, provided by your printer.
You can print:
To save toner, press Toner Save on the control panel. The button
backlight turns on.
• OPC Cleaning sheet: cleans the OPC drum of the toner cartridge.
Using this feature extends the life of the toner cartridge and reduce
your cost per page, but it also reduces print quality.
• Fuser Cleaning sheet: cleans the fuser unit inside the printer.
This process will produce a page with toner debris, which should be
discarded.
Checking the remaining toner
You can check the level of toner left in the cartridge.
1
2
Make sure that the printer is turned on with paper loaded in the tray.
If you are having print quality problems, this can help you determine if
the problem is caused by low toner.
Press Menu until System Setup appears on the bottom line of the
display and press OK.
1
Press Menu until System Setup appears on the bottom line of the
display press OK.
3
4
Press the scroll buttons until Maintenance appears and press OK.
When Clean Drum appears, press OK.
2
3
4
Press the scroll buttons until Maintenance appears and press OK.
Or, press the scroll buttons until Clean Drum or Clean Fuser
appears and press OK.
Press the scroll buttons until Supplies Life appears and press OK
.
Press the scroll buttons to access Toner Remains and press OK.
Your printer automatically picks up a sheet of paper from the tray
and prints out a cleaning sheet with dust or toner particles on it.
The display shows the percentage of the remaining toner.
Note
Maintaining the toner cartridge
While the following messages are appearing on the display, the
sub-menu(s) under Supplies Life can be changed:
Toner cartridge storage
- Invalid Toner, NonGenuine Toner, Replace Toner,
Toner Exhausted
To get the most from the toner cartridge, keep the following guidelines
in mind:
• Do not remove the toner cartridge from its package until ready for use.
• Do not refill the toner cartridge. The printer warranty does not cover
damage caused by using a refilled cartridge.
• Store toner cartridge in the same environment as the printer.
8.2
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Redistributing toner cartridge
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner Low appears on the display.
4
5
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
• The Smart Panel program window appears on the computer telling
you that the toner level is low.
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
• The Status LED blinks red.
If this happens, you can temporarily reestablish print quality by
redistributing the remaining toner in the cartridge. In some cases, white
streaks or light printing will still occur even after you have redistributed
the toner.
1
2
Open the front cover.
Pull the toner cartridge out.
6
Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
When the toner cartridge is completely empty:
• Toner Low Replace Toner appears on the display.
• The Smart Panel program window appears on the computer telling
you that the toner cartridge is empty.
Cautions
• Avoid reaching too far into the printer. The fusing area may
be hot.
• The Status LED blinks red.
At this stage, the toner cartridge needs to be replaced. For order
information for toner cartridges, see page 7.1.
• To prevent damage to the toner cartridge, do not expose it
to light for more than a few minutes. Cover it with a piece of
paper, if necessary.
1
2
Open the front cover.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
Pull the toner cartridge out.
3
Thoroughly roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
8.3
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Remove the new toner cartridge from its bag.
Clearing the Toner Low Replace Toner message
When the Toner Low Replace Toner message appears you can
configure not to see this message again not to disturb you.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
Press the scroll buttons until Maintenance appears and press OK.
Caution
Press the scroll buttons until CLR Empty MSG. appears and press
OK.
Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
4
5
Select On and press OK.
4
Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
Now the Toner Low Replace Toner message does not appear but
the Replace Toner message will remain for reminding you that the
new cartridge needs to be installed for quality.
Caution
Once you have selected On, this setting will be permanently
written to the memory of the toner cartridge, and this menu will
be disappeared from the Maintenance menu.
Maintenance parts
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
Cautions
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Items
Transfer roller
Yield (Average)
70,000 page
• To prevent damage to the toner cartridge, do not expose it
to light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the toner
cartridge. Use the handle on the cartridge to avoid touching
this area.
Pick-up roller
Fuser unit
150,000 page
80,000 page
5
6
Hold the toner cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
Samsung highly recommends that an authorized service provider, dealer
or the retailer where you bought printer performs this maintenance
activity. The warranty does not cover the replacement of the
maintenance parts after their lifespan.
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
7
Close the front cover. Make sure that the cover is securely closed.
8.4
<
Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing paper jams
9Troubleshooting
Note
This chapter provides helpful information for what to do if you encounter
an error while using your printer.
When removing paper that is jammed in the printer, if possible
always pull the paper in the direction that it normally moves so
as not to damage internal components. Always pull firmly and
evenly; do not jerk the paper. If the paper tears, ensure that all
fragments of paper are removed; otherwise a jam will occur
again.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
When a paper jam occurs, the Status LED lights red. Open and close the
front cover. The jammed paper automatically exit the printer.
If the paper does not exit, check the display on the control panel. The
message indicating the corresponding location of the paper jam
appears. Refer to the table below to locate the paper jam and to clear it:
Message
Location of Jam
Go To
In the paper feed area
Paper Jam 0
below
(tray 1, optional tray 2, multi-
purpose tray)
Open/Close Door
Paper Jam 1
Around the toner cartridge
Open/Close Door
Paper Jam 2
Check Inside
In the paper exit area
In the duplex area
In the duplex area
Duplex Jam 0
Check Inside
Duplex Jam 1
Open/Close Door
In the paper feed area
In the tray 1
1
Pull the tray 1 open.
9.1
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Remove the jammed paper by gently pulling it straight out. Make
sure that all of the paper is properly aligned in the tray 1.
4
Pull the paper straight up and out.
5
Insert the trays back into the printer. Printing automatically
resumes.
If the paper does not move when you pull, or if you do not see the
paper in this area, check the fuser area around the toner cartridge.
See page 9.3.
In the multi-purpose tray
1 If the paper is not feeding properly, pull the paper out of the printer.
3
Insert the tray 1 into the printer until it snaps into place. Printing
automatically resumes.
In the optional tray 2
1
2
Pull the optional tray 2 open.
Remove the jammed paper from the printer.
2
Open and close the front cover to resume printing.
If the paper does not move when you pull, or if you do not see the
paper in this area, stop and go to step 3.
3
Pull tray 1 half-way out.
9.2
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Around the toner cartridge
In the paper exit area
1
Open and close the front cover. The jammed paper is automatically
ejected from the printer.
Note
The fuser area is hot. Take care when removing paper from the
printer.
2
Gently pull the paper out of the output tray.
1
2
3
Open the front cover and pull the toner cartridge out.
If you do not see the jammed paper or if there is any resistance
when you pull, stop and go to the next step.
Remove the jammed paper by gently pulling it straight out.
3
4
Open the rear cover.
If you see the jammed paper, push the pressure lever on each side
down and remove the paper. Return the pressure lever to its
original position and skip the step 10.
1
Replace the toner cartridge and close the front cover. Printing
automatically resumes.
pressure lever
1
If you still do not see the paper, go to the next step.
9.3
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Release the blue strap, the rear cover stopper, and fully open the
rear cover, as shown.
8
Pull the jammed paper out.
If the jammed paper does not move when you pull, push the
pressure lever on each side down to loose the paper, and then
remove it.
1
1
1
2
rear cover stopper
rear cover
2
6
Unfold the duplex guide fully.
1
pressure lever
9
Return the lever, door, stopper, and guide to their original position.
10 Close the rear cover. Printing automatically resumes.
In the duplex unit area
1
If the duplex unit is not inserted correctly, paper jam may occur. Make
sure that the duplex unit is inserted correctly.
Duplex jam 0
duplex guide
1
1
Pull the duplex unit out of the printer.
7
While pushing the fuser lever to the right, open the fuser door.
1
1
duplex unit
fuser lever
fuser door
1
2
1
2
9.4
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Remove the jammed paper from the duplex unit.
3
Pull the jammed paper out.
If the paper does not come out with the duplex unit, remove the
paper from the bottom of the printer.
Tips for avoiding paper jams
By selecting the correct media types, most paper jams can be avoided.
are positioned correctly.
• Do not overload the tray. Ensure that the paper level is below the
paper capacity mark on the inside wall of the tray.
• Do not remove paper from the tray while your printer is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
.
Duplex jam 1
• Ensure that the recommended print side of print media is facing down
in the tray, or facing up in the multi-purpose tray.
1
2
Open the rear cover.
• If paper jams occur frequently when you print on A5-sized paper:
Unfold the duplex guide fully.
Load the paper into the tray with the long edge facing the front of the
tray.
1
1
duplex guide
In the printer properties window, set the page orientation to be rotated
90 degrees. See the Software Section.
9.5
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting checklist
Understanding display messages
If the printer is not working properly, consult the following checklist. If the
printer does not pass a step, follow the corresponding troubleshooting
suggestions.
Messages appear on the Smart Panel program window or the control
panel display to indicate the printer’s status or errors. Refer to the tables
below to understand the messages’ meaning and correct the problem if
necessary. Messages and their meanings are listed in alphabetical
order.
Condition
Suggested solutions
Note
• If the Status LED is off, check the power
cord connection. Check the power switch.
Check the power source by plugging the
power cord into another outlet.
• If the Status LED lights red, check the
Make sure that the
Status LED on the
control panel lights
green and Ready is
shown on the
When you call for service, it is very convenient to tell the
service representative the display message.
Message
Door Open
Meaning
Suggested solutions
display.
The front cover or
rear cover is not
securely latched.
Close the cover until
it locks into place.
• If a demo page does not print, check the
paper supply in the tray.
• If the paper jams in the printer, see
• If an error message appears on the
display, see page 9.6.
Print a demo page
to verify that the
printer is feeding
paper correctly. See
Duplex Jam 0
Check Inside
Paper has jammed
during duplex
printing.
Clear the jam. See
Duplex Jam 1
Open/Close Door
Paper has jammed
during duplex
printing.
Clear the jam. See
Check the demo
page to see if it
printed correctly.
If there is a print quality problem, see
Fuser
Door Open
The fuser door is
not securely latched. and close the fuser
Open the rear cover
• If the page does not print, check the cable
connection between the printer and the
computer.
Print a short
document from a
software application
to verify that the
computer and
printer are
connected and are
communicating
correctly.
door until it locks into
place.
• Check the print queue or print spooler to
see if the printer has been paused.
• Check the software application to ensure
that you are using the proper printer driver
and communication port. If the page is
interrupted during printing, see page 9.9.
For the location of
the fuser door, see
The network IP
Check the IP
address you have
set is being used by
someone else.
address and reset it if
necessary. See
IP Conflict
The multi-purpose
tray is empty in
manual feed mode.
Load a sheet of print
material and press
Stop.
Load Manually
Press Stop Key
If completing the
checklist does not
resolve the printer
problem, check the
following
Low Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
troubleshooting
sections.
LSU Hsync Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning
Unit).
Unplug the power
cord and plug it back
inches. If the
problem persists,
please call for
service.
9.6
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Meaning
Suggested solutions
Message
Tray 1
Meaning
Suggested solutions
LSU Motor Error
Cycle Power
A problem has
occurred in the LSU cord and plug it back
(Laser Scanning
Unit).
Unplug the power
There is no paper in Load paper in the
Paper Empty
inches. If the
problem persists,
please call for
service.
Tray 2
There is no paper in Load paper in the
the optional tray 2.
optional tray 2. See
Paper Empty
Main Motor
Locked
There is a problem
in the main motor.
Open and then close
the front cover.
Open Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Over Heat Error
Cycle Power
There is a problem
in the fuser unit.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Paper Jam 0
Paper has jammed
in the feeding area
of the tray.
Clear the jam. See
Open/Close Door
Paper Jam 1
Paper has jammed
in the fuser area.
Clear the jam. See
Open/Close Door
Paper Jam 2
Check Inside
Paper has jammed
in the paper exit
area.
Clear the jam. See
The printer is
printing jobs using
the displayed
language.
Complete your
printing.
Printing...
Ready
The printer is on-line
and ready to printer.
Use your printer.
Self Diagnostic
LSU
The LSU(Laser
Scanning Unit) in
your printer is
Please wait a few
minutes.
checking some
problems detected.
Self Diagnostic
Temperature
The engine in your
printer is checking
some problems
detected.
Please wait a few
minutes.
When data is
received, it switches
to on-line
The printer is on
power save mode.
Sleeping...
automatically.
9.7
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Toner cartridge-related messages
Message
Install
Meaning
Suggested solutions
The toner cartridge is installed
Reinstall the toner cartridge two or three times. If the problem persists, the toner cartridge
Toner
improperly, or not installed.
is not being detected. Please contact the service representatives.
Invalid
Toner
The toner cartridge you have
installed is not for your printer.
Install a Samsung-genuine toner cartridge, designed for your printer.
Toner Low
The toner cartridge is almost
empty.
Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily
reestablish printing operations.
NonGenuine Toner The toner cartridge installed is not You can select either Stop or Continue. If you do not select any, the printer will work as
a Samsung-genuine cartridge.
Stop is selected.
Stop
If you select Stop, you cannot print until the Samsung-genuine cartridge is installed.
However, you can still print any kind of reports.
If you select Continue, you can keep printing but the quality cannot be guaranteed, and the
product support is no longer provided.
If you want to change the selection, turn the printer off and on to have this message appear
again, and then re-select Stop or Continue.
NonGenuine Toner The toner cartridge installed is not This message appears when you selected Stop at the NonGenuine Toner prompt.
a Samsung-genuine cartridge.
Replace Toner1
Install the Samsung-genuine toner cartridge.
NonGenuine Toner The toner cartridge installed is not This message appears when you selected Continue at the NonGenuine Toner prompt.
a Samsung-genuine cartridge.
Replace Toner
Install the Samsung-genuine toner cartridge.
Toner Low
The toner in the cartridge has run Install a new Samsung-genuine toner cartridge.
out.
Replace Toner
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
Replace Toner
The toner in the cartridge has run This message appears when you turned off the Toner Low Replace Toner message. See
out.
Install a new Samsung-genuine toner cartridge.
You can keep printing but the quality cannot be guaranteed, and the product support is no
longer provided.
Toner Exhausted
The lifespan of the toner cartridge This message appears when the toner is completely empty and your machine stops
is reached. printing. Install the Samsung-genuine toner cartridge.
9.8
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
Solving general printing problems
The printer may
be configured
incorrectly.
Check the printer properties to
ensure that all of the print
settings are correct.
For problems with the operation of your printer, refer to the table for
suggested solutions.
The printer driver
may be
incorrectly
installed.
Condition
Possible cause
Suggested solutions
The printer
does not
print.
Reinstall the printer driver; See
the Software Section. Try
printing a test page.
Check the power cord
connections. Check the power
switch and the power source.
The printer is not
receiving power.
(Continued)
Check the display message on
the control panel to determine if
the printer is indicating a
system error.
The printer is not
selected as the
default printer.
The printer is
malfunctioning.
Select Samsung ML-3470
Series as your default printer.
The printer cover Close the printer cover.
is not closed.
For many software
Printer
applications, the paper source
selection is found under the
Paper tab within the printer
properties. Select the correct
paper source. See the
selects print
materials
from the
wrong paper may be incorrect.
source.
The paper source
selection in the
printer properties
Paper is jammed. Clear the paper jam. See
No paper is
loaded.
Software Section.
The toner
cartridge is not
installed.
Install the toner cartridge.
Remove paper from the tray
and reload it correctly.
Paper has not
been loaded
correctly.
Check that the paper size
guides are set correctly.
Paper does
not feed into
the printer.
The printer may
be in manual feed add paper to the multi-purpose
mode and out of
paper.
Check the display message,
The printer
does not
print.
There is too much Remove excess paper from the
tray, and press OK on the
printer’s control panel.
paper in the tray.
tray.
The paper is too
thick.
Use only paper that meets
printer specifications.
The connection
cable between
Reduce the complexity of the
page(s) or try adjusting the
print quality settings.
the computer and Disconnect the printer cable
the printer is not
connected
and reconnect it.
properly.
To adjust the print quality
settings, reduce the resolution.
If you have set the resolution to
1200 dpi (Best), change it to
600 dpi (Normal). See the
Software Section.
The connection
cable between
the computer and working properly and try to print
the printer is
defective.
If possible, attach the cable to
another computer that is
a document. You can also try
using a different printer cable.
The job may be
very complex.
Change the port setting to the
USB or network port to improve
print speed.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
port. If the computer has more
than one port, make sure that
the printer is attached to the
correct one.
Print job is
extremely
slow.
The port setting is
incorrect.
Your printer prints A4-sized
paper at 33 ppm and letter-
sized paper at 35 ppm and your
printer prints A4-sized paper at
17 ipm and letter-sized paper at
18 ipm in the duplex printing
mode.
The computer
may have
insufficient
random-access
memory (RAM).
Install more memory in your
printer. See page 10.1.
9.9
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Possible cause
Suggested solutions
Condition
Possible cause
Suggested solutions
Simplify the page layout and
remove any unnecessary
graphics from the document.
The wrong printer Check the application’s printer
driver was
selected.
selection menu to ensure that
your printer is selected.
The page layout
is too complex.
Install more memory in your
The software
application is
malfunctioning.
Try printing a job from another
application.
The printer
prints, but
the text is
wrong,
garbled, or
incomplete.
(Continued)
The page
Change the page orientation in
orientation setting your application. See the
Half the page may be incorrect. Software Section.
If printing from Windows (any
version), exit to a DOS prompt
and verify functionality with the
following command: At a C:\
prompt, type Dir LPT1, and
press OK. (This assumes you
are connected to LPT1.)
is blank.
Ensure that the paper size in
the printer driver settings
matches the paper in the tray.
The operating
system is
malfunctioning.
The paper size
and the paper
size settings do
not match.
Or, ensure that the paper size
in the printer driver settings
matches the paper selection in
the software application
settings you use.
Exit Windows and reboot the
computer. Turn the printer off
and then back on again.
Redistribute the toner
The toner
Remove excess paper from the
tray.
cartridge is
defective or out of
toner.
There is too much
paper in the tray.
If necessary, replace the toner
If printing on special materials,
use the multi-purpose tray.
Pages print,
but are
blank.
The file may have Check the file to ensure that it
Use only paper that meets
printer specifications.
An incorrect type
of paper is being
used.
blank pages.
does not contain blank pages.
If printing on special materials,
use the multi-purpose tray.
Some parts, such
as the controller
or the board, may representative.
be defective.
The paper
keeps
jamming.
Contact a service
Special print materials, such as
thick paper, should not be
printed using the output tray
(face-down). Use the rear
cover (face-up) instead.
An incorrect
output method is
being used.
The
illustrations
print
Select Download as Bit Image
The setting in the
software
incorrectly in application is
in the Advanced Options
window of the graphic
properties. Print the document
again.
There may be
debris inside the
printer.
Adobe
Illustrator.
wrong.
Open the front cover and
remove the debris.
The printer
does not
print PDF file
correctly.
Some parts
of graphics,
text, or
illustrations
are missing.
If you are under
the DOS
environment, the
font setting for
your machine
may be set
Printing the PDF file as an
image may solve this problem.
Turn on Print As Image from
the Acrobat printing options.
Note: it will take longer to print
when you print a PDF file as an
image.
Incompatibility
between the PDF
file and the
Change the font setting.
The printer
prints, but
the text is
wrong,
garbled, or
incomplete.
Acrobat products.
incorrectly.
Disconnect and reconnect the
printer cable. Try a print job that
you have already printed
successfully. If possible, attach
the cable and printer to another
computer and try a print job
that you know works. Finally,
try a new printer cable.
The printer cable
is loose or
defective.
9.10
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Solving print quality problems
Vertical lines
Dirt inside of the printer or improper paper loading may reduce print
quality. See the table below to troubleshoot problems.
AaaBBbbCCcc
AaaBBbbCCcc
AaaBBbbCCcc
AaaBBbbCCcc
AaaBBbbCCcc
If black vertical streaks appear on the page:
• The drum inside the toner cartridge has
probably been scratched. Install a new toner
cartridge.
Condition
Suggested solutions
If a vertical white streak or faded area appears on
the page:
• The toner supply is low. You may be able to
temporarily extend the toner cartridge life. See
page 8.3. If this does not improve print quality,
install a new toner cartridge.
• The paper may not meet paper specifications
(for example, the paper is too moist or too
rough). See page 5.3.
• If the entire page is light, the print resolution
setting is too light or toner save mode is on.
Adjust the print resolution and toner save mode
in the printer properties. See the Software
Section.
If the amount of background shading becomes
unacceptable, the procedures below may fix the
problem.
Gray
background
Light or faded
print
• Check the printer’s environment; very dry (low
humidity) or high humidity (higher than 80%
RH) conditions can increase the amount of
background shading.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaaBbbCcc
AaaBbbCcc
AaaBbbCcc
AaaBbbCcc
AaaBbbCcc
• Remove the old toner cartridge and install a
new one. See page 8.3.
• A combination of faded or smeared defects
may indicate that the printer needs cleaning.
See page 8.1.
• The surface of LSU may be dirty. Clean the
Toner smear
• Remove the toner cartridge and install a new
one. See page 8.3.
Toner spots
• The paper may not meet specifications (for
example, the paper is too moist or too rough).
See page 5.3.
• The transfer roller or paper path may be dirty.
See page 8.1.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
If marks repeatedly appear on the printed side of
the page at even intervals:
Vertical
repetitive
defects
• The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the
you still have the same problems, install a new
toner cartridge. See page 8.3.
• Parts of the printer may have toner on them. If
the defects occur on the back of the page, the
problem will likely correct itself after a few more
pages.
If generally rounded, faded areas occur randomly
on the page:
A a B b C c
A a B b C c
A a B b C c
A a B b C c
A a B b C c
• A single sheet of paper may be defective. Try
reprinting the job.
Dropouts
• The moisture content of the paper is uneven or
the paper has moist spots on its surface. Try a
• The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
• The toner cartridge may be defective. See
“Vertical repetitive defects” on the next page.
• If these steps do not correct the problems,
contact a service representative.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• The fusing assembly may be damaged.
Contact a service representative.
9.11
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Back of
printouts are
dirty
Suggested solutions
Background scatter results from bits of toner
distributed on the printed page.
• Check for leaking toner. Clean the inside of the
printer.
• The paper may be too damp. Try printing with a
different batch of paper. Do not open packages
of paper until necessary so that the paper does
not absorb too much moisture.
Background
scatter
• If background scatter occurs on an envelope,
change the printing layout to avoid printing over
areas that have overlapping seams on the reverse
side. Printing on seams can cause problems.
• If background scatter covers the entire surface
area of a printed page, adjust the print
A
Solid color or
Black pages
• The toner cartridge may not be installed
properly. Remove the cartridge and reinsert.
• The toner cartridge may be defective and need
replacing. Install a new toner cartridge.
• The printer may require repair. Contact a
service representative.
resolution through your software application or
via the printer properties window.
Misformed
characters
• If characters are improperly formed and
producing hollowed images, the paper stock
may be too slick. Try a different paper. See
• If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service. Verify that it also occurs on a
a service representative.
Loose toner
• Clean the inside of the printer.
• Check the paper type and quality. See
• If the problem persists, the printer may require
repair. Contact a service representative.
Page skew
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See
• Ensure that the paper or other material is
loaded correctly and the guides are not too
tight or too loose against the paper stack.
Character voids are white areas within characters
that should be solid black:
Character
Voids
• If you are using transparencies, try another
type of transparency. Because of the
composition of the transparency, some
character voids may be normal.
• You may be printing on the wrong surface on
the paper. Remove the paper and turn it
around.
Curl or wave
• Ensure that the paper is loaded properly.
• Check the type and quality. Both high
temperature and humidity can cause paper
• Turn over the stack of paper in the tray. Also try
rotating the paper 180° in the tray.
A
• The paper may not meet paper specifications.
• Try printing to the rear cover (face-up).
Horizontal
stripes
If horizontally aligned black streaks or smears
appear:
Wrinkles or
creases
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See
• Open the rear cover and try printing to the rear
cover (face-up).
• The toner cartridge may be installed
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
improperly. Remove the cartridge and reinsert.
• The toner cartridge may be defective. Install a
new toner cartridge. See page 8.3.
• If the problem persists, the printer may require
repair. Contact a service representative.
• Turn over the stack of paper in the tray. Also try
rotating the paper 180° in the tray.
9.12
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Curl
Suggested solutions
Common PostScript problems
The following situations are PostScript language specific and may occur
when several printer languages are being used.
If the printed paper is curled or paper does not
feed into the printer:
Note
• Turn over the stack of paper in the tray. Also try
rotating the paper 180° in the tray.
• Try printing to rear cover.
To receive a printed or screen displayed message when
PostScript errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
An unknown
image
Condition
Possible cause
Suggested solutions
Your printer is probably being used at an altitude
of 1,000 m (3,281 ft) or above.
repetitively
appears on a
next few sheets
or loose toner,
light print, or
contamination
occurs.
• Print a configuration page
and verify that the PostScript
version is available for
printing.
• Install the PostScript driver.
• If problem consists, contact a
service representative.
The high altitude may affect the print quality such
as loose toner or light imaging. You can set this
option through Printer Settings Utility or Printer
ThePostScript
driver may not
be installed
correctly.
PostScript file
can not be
printed.
“Limit Check
Error” message was too
appears.
The print job
You might need to reduce the
complexity of the page or install
more memory.
Common Windows problems
complex.
Make sure that the print job is a
PostScript job. Check to see
whether the software
application expected a setup or
PostScript header file to be sent
to the printer.
Condition
Suggested solutions
A PostScript
error page
prints.
Print job may
not be
PostScript.
“File in Use”
message appears
during installation.
Exit all software applications. Remove all
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
• Ensure that the cables are connected
correctly, the printer is on.
• If bi-directional communication is not turned
on in the driver, it will also cause this
message.
The optional
tray 2 is not
selected in the
driver.
The printer
driver has not
been
configured to
recognize the
optional tray 2.
Open the PostScript driver
properties, select the Device
Settings tab, and set the Tray2
option of the Installable
“Error Writing to
LPTx” message
appears.
Options section to Installed.
“General Protection
Fault”, “Exception
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
When print a
document in
Macintosh with printer driver
AcrobatReader may not be
The resolution Make sure that the resolution
setting in the
Close all other applications, reboot Windows
and try printing again.
setting in your printer driver
matches that in Acrobat
Reader.
6.0 or higher,
colors print
incorrectly.
matched with
that in Acrobat
Reader.
These messages may appear during printing.
Just keep waiting until the printer finishes
printer timeout error printing. If the message appears in standby
“Fail To Print,” “A
occurred,”
messages appear.
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
Note
Refer to Microsoft Windows 2000/XP/2003 User’s Guide that
came with your PC for further information on Windows error
messages.
9.13
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Linux problems
Common Macintosh problems
Condition
Suggested solutions
Condition
Suggested solutions
Incompatibility between the PDF file and
the Acrobat products:
• Check if the printer driver is installed in your
system. Open Unified Driver Configurator
and switch to the Printers tab in Printers
configuration window to look at the list of
available printers. Make sure that your
machine is displayed on the list. If not,
please, invoke Add new printer wizard to set
up your device.
The printer does not
print PDF file correctly.
Some parts of graphics,
text, or illustrations are
missing.
Printing the PDF file as an image may
solve this problem. Turn on Print As
Image from the Acrobat printing options.
Note: it will take longer to print when you
print a PDF file as an image.
The document has
printed, but the print job
has not disappeared
from the spooler in Mac
OS 10.3.2.
• Check if the printer is started. Open Printers
configuration and select your machine on
the printers list. Look at the description in
Update your Mac OS to OS 10.3.3 or
higher.
The printer doesn’t
print.
the Selected printer pane. If its status
contains “(stopped)” string, please, press
the Start button. After that normal operation
of the printer should be restored. The
"stopped" status might be activated when
some problems in printing occurred.
• Check if your application has special print
option such as “-oraw”. If “-oraw” is
specified in the command line parameter
then remove it to print properly. For Gimp
front-end, select “print” -> “Setup printer”
and edit command line parameter in the
command item.
Please avoid changing print job parameters
(via LPR GUI, for example) while a print job is
in progress. Known versions of CUPS server
break the print job whenever print options are
changed and then try to restart the job from
the beginning. Since Unified Linux Driver
locks port while printing, the abrupt
termination of the driver keeps the port locked
and therefore unavailable for subsequent print
jobs. If this situation occurred, please, try to
release the port.
I encounter error
“Unable to open
MFP port device
file!” when printing
a document.
The CUPS (Common Unix Printing System)
version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with IPP
(Internet Printing Protocol) printing. Use the
socket printing instead of IPP or install later
version of CUPS (cups-1.1.22 or higher).
When printing a
document over the
network in SuSE
9.2, the printer
does not print.
9.14
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Grasp the control board cover and slide toward you to open it.
10 Installing accessories
Your printer is a full-featured laser printer that has been optimized to
meet most of your printing needs. Recognizing that each user may have
different requirements, however, Samsung makes several accessories
available to enhance the printer’s capabilities.
This chapter includes:
•
•
•
1
control board cover
1
Precautions when installing accessories
3
Completely open the latch on each side of the DIMM slot.
Disconnect the power cord:
Never remove the control board cover while the power is being supplied.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
1
Discharge static electricity:
The control board and internal accessories (network interface card and
memory DIMM) are sensitive to static electricity. Before installing or
removing an internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk round before
finishing installation, discharge any static electricity once again.
1
latch
4
5
Take out a new memory DIMM from the plastic bag.
Holding the memory DIMM by the edges, align the notches on the
memory DIMM with the grooves on the memory DIMM slot.
Installing a memory DIMM
Your printer has a dual in-line memory module (DIMM) slot. Use this
DIMM slot to install additional memory.
ML-3470D has 32 MB of memory which can be expanded to 288 MB.
ML-3471ND has 64 MB of memory which can be expanded to 320 MB.
For order information for optional memory DIMM’s, see page 7.1.
1
Turn the printer power off and unplug all cables from the printer.
10.1
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
7
8
Select the amount of memory you installed from Printer Memory in
the Installable Option section.
Click OK.
Installing a wireless network interface card
ML-3471ND is equipped with a network interface which allows you to
use your printer on a network. You can also purchase a wireless network
interface card to enable the use of the printer in wireless network
environments
For order information, see page 7.1.
7
Replace the control board cover.
install the wireless network interface card in your printer.
1
2
Turn the printer power off and unplug all cables from the printer.
Grasp the control board cover and slide toward you to open it.
8
Reconnect the power cord and printer cable, and turn the printer
on.
1
Setting the memory in the PostScript printer
properties
control board cover
1
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
3
Align the connector on the wireless network interface card with the
connector on the control board. Push the card firmly into the
connector on the control board until it is completely and securely in
place.
1
Make sure that the PostScript printer driver is installed in your
computer. To installing the PostScript printer driver, you need to
select Custom and put a check mark on the PostScript printer
driver. See the Software Section.
2
3
Click the Windows Start menu.
1
2
For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel -> Hardware and Sound
-> Printers.
4
5
Select the Samsung ML-3470 Series printer.
connector
1
2
wireless network
interface card
Click the right mouse button on the printer icon and select
Properties.
6
For Windows 2000/XP/2003/Vista, select Device Settings tab.
10.2
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Replace the control board cover.
Configuring the wireless network parameters
After installing the wireless network card, you must configure the
appropriate network parameters to use your printer in a wireless
network. To do this, you can use both control panel and SyncThru Web
Service, an embedded web site of your printer. This section gives you
basic information on 802.11b/g network parameters which can be
configured from the control panel.
Configuring basic network settings
You can configure basic wireless settings, such as SSID, Operation
Mode, and channels. You can retrieve basic settings by selecting a
wireless network or manually configure them as you need.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
5
Reconnect the power cord and turn the printer on.
Note
2
3
4
Press the scroll buttons until Wireless appears and press OK.
You can also configure the network parameters on the control
panel; see the next column.
Press OK when WLAN Basic appears.
Press the scroll buttons to select the setup method you want and
press OK.
• Search List: The wireless network interface card on your printer
searches for wireless networks in the area and shows the results.
• Custom: You can configure the wireless settings according to
your needs.
5
If you selected Search List, press the scroll buttons to select a
network and press OK.
If you selected Custom, set each network options:
• Edit SSID: Enter the SSID, the name that identifies a wireless
network. SSID is case-sensitive so you need to enter it.
• Operation Mode: Select the type of wireless connections.
In Ad-Hoc mode, wireless cards communicate directly each other.
In Infrastructure mode, network cards communicate with each
other through an access point, which allows both wireless and
cabled cards to send files to the printer. If you select Auto, the
printer selects the operation mode automatically, according to the
network cable’s connection each time it boots up.
Note
In Ad-Hoc mode, even if the network cable is connected,
your printer will use the wireless interface.
• Channel: This option is available only in the Ad-Hoc mode. In
most cases, you will not need to change this setting. The printer
will scan all available channels for the specified network and will
adapt its channel to the one detected.
6
When you have finished, press Stop to return to Standby mode.
10.3
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the authentication type
Hexadecimal
26 digits
Alphanumeric
13 characters
Authentication is a process of identifying the legitimacy of an user to
access a network. You can select whether or not authentication is used.
128-bit WEP
7
When you have finished, press Stop to return to Standby mode.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
Restoring default values for wireless networking
2
3
Press the scroll buttons until Wireless appears and press OK.
If the problem occurrs when you use or set up the wireless network
values, take following stops to restore factory default values. Generally,
factory values of wireless networking are optimized for your printer.
Press the scroll buttons until WLAN Security appears and press
OK.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
4
5
Press the scroll buttons until Static WEP appears and press OK.
Press the scroll buttons until Authentication appears and press
2
3
Press the scroll buttons until Wireless appears and press OK.
OK.
Press the scroll buttons until WLAN Default appears and press
OK.
6
Press the scroll buttons to select the type you want.
• Open System: Authentication is not used.
• Shared Key: Authentication is used.
4
When Restore appears on the bottom line of the display, press
OK. The printer starts restoring the default values.
7
8
Press OK to save your selection.
Press Stop to return to Standby mode.
Setting Encryption
If your network uses WEP encryption keys, you can must select the
appropriate encryption type and configure encryption keys. You can
configure up to four keys. The active key must match the key value and
key position (for example, Key 1) configured on other wireless devices in
the network.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
2
3
Press the scroll buttons until Wireless appears and press OK.
Press the scroll buttons until WLAN Security appears and press
OK.
4
5
Press the scroll buttons until Static WEP appears and press OK.
Press the scroll buttons until Encryption appears and press OK.
Note
If you have set the authentication type to Open System, the
Encryption menu does not display.
6
Set each encryption option and press OK.
• Encrypt. Type: Select an encryption type:
• Key Type: Select the key type of your network.
• Using Key: Select the key to be used in your network.
• Edit Key: Enter the key number for the selected key position. The
numbers you can enter as follows:
Hexadecimal
10 digits
Alphanumeric
5 characters
64-bit WEP
10.4
<Installing accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Memory
Specifications and Description
11 Specifications
ML-3470D
ML-3471ND
32MB (Max 288 MB)
64 MB (Max 320 MB)
This chapter includes:
•
32, 64, 128, or 256 MB optional memory
available.
Printer specifications
Use only the Samsung-approved DIMM.
Fonts
1 bitmap, 45 scalable, 136 PostScript3 fonts
Item
Specifications and Description
ML-3470D, ML-3471ND
Interface
• IEEE 1284 Bidirectional Parallel Standard
- Modes supported: Compatible, Nibble, Byte,
ECP
Model name
Printing speed
a
33 ppm (A4); 35 ppm (Letter)
Duplex: 17 ipm (A4); 18 ipm (Letter)
• USB Interface Standard
- USB 2.0 compliant
Resolution
Up to 1200 x 1200 dpi effective output
Less than 15 seconds
- 480 Mbps 1 port
• Network Interface
ML-3471ND: 10/100 Base TX
Warm-up time
First print out time Standby mode: 8.5 seconds
Sleep mode: 25 seconds
f
OS compatibility
• Windows 2000/XP/2003./Vista
• Various Linux OS.
• Mac 8.6 ~ 9.2/10.1 ~ 10.5
Power rating
110 - 127 VAC or 220 - 240 VAC
See the Rating label on the machine for the
correct voltage, frequency(hertz) and type of
current for your machine.
Options
ML-3470D
250-sheet tray
ML-3471ND
250-sheet tray, 802.11b/g
wireless LAN
Power
consumption
Printing mode: 600 W
Power save mode: Less than 10 W
a. Print speed will be affected by operating system used, computing perfor-
mance, application software, connection method, media type, media size, and
job complexity.
b
Noise level
Standby mode: Less than 26 dBA
Printing mode: Less than 52 dBA
b. Sound pressure Level, ISO7779
c. The number of pages may be affected by operating environment, printing inter-
val, media type, and media size.
d
Toner cartridge
life
• Starter toner cartridge: 4,000 pages
c
• Standard: 4,000 pages
• High yield: 10,000 pages
(Declared yield value in accordance with ISO/IEC
19752)
d. It varies depending on the product configuration.
e. Compatible with PCL6 Version 2.1
Duty cycle
Weight
Monthly: Up to 80,000 pages
Gross: 15.5 Kg / Net: 12.2 Kg(including
consumables)
Package weight
Paper: 2.5 Kg, Plastic: 0.6 Kg
External
dimensions
(W x D x H)
400 x 433.4 x 285 mm (15.75 x 17.1 x
11.2 inches)
Operating
environment
Temperature: 10 ~ 32° C (50 ~ 90° F)
Humidity: 20 ~ 80% RH
e
Printer language
PCL 6 , PostScript 3, IBM ProPrinter, EPSON,
SPL
11.1
<Specifications>
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
paper load
paper size
setting 2.3
specifications 5.2
paper type
setting 2.3
specifications 5.2
printing
A
J
accessories
installing
wireless network interface card
L
loading paper
C
cleaning
drum 8.2
problem, solve
M
inside 8.1
outside 8.1
checklist 9.6
Linux 9.14
Macintosh 9.14
printing 9.9
control panel
menus 2.1
N
network setup
Windows 9.13
D
EtherTalk 4.3
TCP/IP 4.2
display language, change
Q
wireless 10.3
O
R
E
,
P
H
paper jam, clear
S
I
supplies
installing accessories
memory 10.1
system requirements
Linux 3.3
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung Printer
Software section
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION
CONTENTS
Installing Printer Software ........................................................................................................ 4
Installing Software for Local Printing ................................................................................. 4
Installing Software for Network Printing ............................................................................. 7
Changing the Software Language ............................................................................................ 10
Reinstalling Printer Software ................................................................................................... 10
Removing Printer Software ..................................................................................................... 11
Printing a Document .............................................................................................................. 12
Printing to a file (PRN) .......................................................................................................... 13
Printer Settings ..................................................................................................................... 13
Layout Tab .................................................................................................................. 14
Paper Tab .................................................................................................................... 14
Graphics Tab ............................................................................................................... 15
Extras Tab ................................................................................................................... 16
About Tab ................................................................................................................... 17
Printer Tab .................................................................................................................. 17
Using a Favorite Setting ................................................................................................ 17
Using Help ................................................................................................................... 17
Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 18
Printing Posters ..................................................................................................................... 19
Printing Booklets .................................................................................................................. 19
Printing on Both Sides of Paper ............................................................................................... 20
Printing a Reduced or Enlarged Document ................................................................................ 20
Fitting Your Document to a Selected Paper Size ......................................................................... 20
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Watermarks ................................................................................................................. 21
Using an Existing Watermark ......................................................................................... 21
Creating a Watermark ................................................................................................... 21
Editing a Watermark ..................................................................................................... 21
Deleting a Watermark ................................................................................................... 21
Using Overlays ...................................................................................................................... 22
What is an Overlay? ...................................................................................................... 22
Creating a New Page Overlay ......................................................................................... 22
Using a Page Overlay .................................................................................................... 22
Deleting a Page Overlay ................................................................................................ 22
Printer Settings ..................................................................................................................... 23
Advanced .................................................................................................................. 23
Using Help ................................................................................................................... 23
Setting Up a Host Computer ................................................................................................... 24
Setting Up a Client Computer .................................................................................................. 24
Understanding Smart Panel .................................................................................................... 25
Opening the Troubleshooting Guide ......................................................................................... 26
Using Printer Settings Utility ................................................................................................... 26
Using Onscreen Help File ............................................................................................... 26
Changing the Smart Panel Program Settings ............................................................................. 26
Getting Started ..................................................................................................................... 27
Installing the Unified Linux Driver ............................................................................................ 27
Installing the Unified Linux Driver ................................................................................... 27
Uninstalling the Unified Linux Driver ............................................................................... 28
Using the Unified Driver Configurator ....................................................................................... 29
Opening the Unified Driver Configurator .......................................................................... 29
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers Configuration ................................................................................................... 29
Ports Configuration ....................................................................................................... 30
Configuring Printer Properties ................................................................................................. 30
Printing a Document .............................................................................................................. 31
Printing from Applications .............................................................................................. 31
Printing Files ................................................................................................................ 31
Installing Software ................................................................................................................ 32
Printer driver ............................................................................................................... 32
Setting Up the Printer ............................................................................................................ 33
For a Network-connected ............................................................................................... 33
For a USB-connected .................................................................................................... 33
Printing ................................................................................................................................ 34
Printing a Document ..................................................................................................... 34
Changing Printer Settings .............................................................................................. 34
Printing Multiple Pages on One Sheet of Paper .................................................................. 36
Duplex Printing ............................................................................................................ 36
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Typical Installation
1
Installing Printer
Software in Windows
This is recommended for most users. All components necessary
for printer operations will be installed.
1
2
Make sure that the printer is connected to your computer
and powered on.
This chapter includes:
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “
letter which represents your drive and click OK
If you use Windows Vista, click Start All programs
Accessories Run, and type X:\Setup.exe
X” with the
NOTE: The following procedure is based on Windows XP, for
other operating systems, refer to the corresponding Windows
user's guide or online help.
.
→
→
→
.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
Installing Printer Software
You can install the printer software for local printing or network
printing. To install the printer software on the computer,
perform the appropriate installation procedure depending on
the printer in use.
A printer driver is software that lets your computer
communicate with your printer. The procedure to install drivers
may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning
installation.
Installing Software for Local Printing
3
4
Click Next.
• If necessary, select a language from the drop-down list.
A local printer is a printer directly attached to your computer
using the printer cable supplied with your printer, such as a USB
or parallel cable. If your printer is attached to a network, skip
this step and go to “Installing Software for Network Printing” on
Select Typical installation for a local printer. Click
Next
.
You can install the printer software using the typical or custom
method.
NOTE: If the “New Hardware Wizard” window appears during
the installation procedure, click
in the upper right corner of
the box to close the window, or click Cancel
.
4
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: After setup is complete, if your printer driver doesn’t
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Custom Installation
You can choose individual components to install.
1
2
Make sure that the printer is connected to your computer
and powered on.
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “
letter which represents your drive and click OK
If you use Windows Vista, click Start All programs
Accessories Run, and type X:\Setup.exe
X” with the
.
• After connecting the printer, click Next
.
→
→
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
→
.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
5
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next
.
6
7
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
3
Click Next
.
Otherwise, just click Finish
.
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
5
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Custom installation. Click Next
.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
6
Select the components to be installed and click Next.
5
Select your printer and click Next.
NOTE: You can change the desired installation folder by
clicking [Browse].
7
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next
.
8
9
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Otherwise, just click Finish
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
6
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Typical installation for a network printer. Click
Next
Installing Software for Network
Printing
.
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
2
Insert the supplied CD-ROM into your CD-ROM drive.
click Next
.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “
letter which represents your drive and click OK
If you use Windows Vista, click Start All programs
Accessories Run, and type X:\Setup.exe
X” with the
.
→
→
→
.
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To verify your printer’s IP address or the MAC address,
print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
3
Click Next
.
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
NOTE: If you cannot find your machine in network, please
turn off the firewall and click Update
.
6
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
7
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung. If you so desire, select the corresponding
checkbox(es) and click Finish
If the AutoPlay window appears in Windows Vista, click
Run Setup.exe in Install or run program field, and
click Continue in the User Account Control window.
.
Otherwise, just click Finish
.
3
4
Click Next
.
NOTE: After setup is complete, if your printer driver doesn’t
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Custom Installation
Select Custom installation. Click Next
.
You can choose individual components to install and set a
specific IP address.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “
letter which represents your drive and click OK
If you use Windows Vista, click Start All programs
Accessories Run, and type X:\Setup.exe
X” with the
.
→
→
→
.
8
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
click Next
.
c. Click Next
.
6
Select the components to be installed. After selecting the
components, the following window appears. You can also
change the printer name, set the printer to be shared on
the network, set the printer as the default printer, and
change the port name of each printer. Click Next
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To verify your printer’s IP address or the MAC address,
print a Network Configuration page.
To install this software on a server, select the Setting up
this printer on a server checkbox.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
7
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
NOTE: If you cannot find your machine in network, please turn
off the firewall and click Update
.
checkbox(es) and click Finish
.
Otherwise, just click Finish
.
TIP: If you want to set a specific IP address on a specific
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
NOTE: After setup is complete, if your printer driver doesn’t
a. Select a printer to be set with a specific IP address from the
list.
9
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Reinstalling Printer Software
You can reinstall the software if installation fails.
1
2
Start Windows.
From the Start menu select Programs or All Programs
your printer driver name
→
→Maintenance.
3
4
Select Repair and click Next
.
The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The reinstallation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5
Select the components you want to reinstall and click
Next
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
.
If you installed the printer software for local printing
and you select your printer driver name, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
Next
.
b. If the test page prints out correctly, click Yes
.
If it doesn’t, click No to reprint it.
You will see a component list so that you can reinstall any
item individually.
6
When the reinstallation is done, click Finish
.
10
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Printer Software
1
2
Start Windows.
From the Start menu select Programs or All Programs
your printer driver name
→
→Maintenance.
3
Select Remove and click Next
.
You will see a component list so that you can remove any
item individually.
4
5
Select the components you want to remove and then click
Next
When your computer asks you to confirm your selection,
click Yes
.
.
The selected driver and all of its components are removed
from your computer.
6
After the software is removed, click Finish.
11
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Open the document you want to print.
Select Print from the File menu. The Print window is
displayed. It may look slightly different depending on your
application.
2
Basic Printing
This chapter explains the printing options and common printing
tasks in Windows.
The basic print settings are selected within the Print
window. These settings include the number of copies and
print range.
This chapter includes:
Make sure that your
printer is selected.
3
4
Select your printer driver from the Name drop-down
list.
To take advantage of the printer features provided by your
printer driver, click Properties or Preferences in the
application’s Print window. For details, see “Printer
Printing a Document
NOTES
:
If you see Setup Printer, or Options in your Print
,
window, click it instead. Then click Properties on the next
screen.
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User’s
Guide.
Click OK to close the printer properties window.
To start the print job, click OK or Print in the Print
window.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
The following procedure describes the general steps required
for printing from various Windows applications. The exact steps
for printing a document may vary depending on the application
program you are using. Refer to the User’s Guide of your
software application for the exact printing procedure.
12
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing to a file (PRN)
Printer Settings
You will sometimes need to save the print data as a file for your
purpose.
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
To create a file:
1
Check the Print to file box at the Print window.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows XP.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your
page 17).
NOTES
:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
2
Select the folder and assign a name of the file and then
click OK.
1. Click the Windows Start button.
2. Select Printers and Faxes
.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences
.
5. Change the settings on each tab, click OK.
13
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout Tab
Paper Tab
The Layout tab provides options to adjust how the document
appears on the printed page. The Layout Options includes
Use the following options to set the basic paper handling
specifications when you access the printer properties. See
“Printing a Document” on page 12 for more information on
accessing printer properties.
Multiple Pages per Side
,
Poster Printing and Booklet
information on accessing printer properties.
Click the Paper tab to access various paper properties.
Paper Orientation
Paper Orientation allows you to select the direction in which
information is printed on a page.
Copies
Copies allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
•
•
Portrait prints across the width of the page, letter style.
Landscape prints across the length of the page, spreadsheet
style.
Paper Options
•
Rotate allows you to rotate the page the selected degrees.
Size
Size allows you to set the size of paper you loaded in the tray.
If the required size is not listed in the Size box, click Custom
.
When the Custom Paper Setting window appears, set the paper
size and click OK. The setting appears in the list so that you can
select it.
Landscape
Portrait
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side and Poster Printing
.
•
For details, see “Printing Multiple Pages on One Sheet of Paper
•
•
For details, see “Printing Posters” on page 19
For details, see “Printing Booklets” on page 19
Double-sided Printing
Double-sided Printing allows you to print on both sides of
paper. If this option does not appear, your printer does
not have this feature.
•
For details, see “Printing on Both Sides of Paper” on page 20.
14
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Source
Graphics Tab
Use the following Graphic options to adjust the print quality for
your specific printing needs. See “Printing a Document” on
page 12 for more information on accessing printer properties.
Make sure that Source is set to the corresponding paper tray.
Use Manual Feeder when printing on special materials like
envelopes and transparencies. You have to load one sheet at a
time into the Manual Tray or Multi-Purpose Tray.
If the paper source is set to Auto Selection, the printer
automatically picks up print material in the following tray order:
Manual Tray or Multi-Purpose Tray, Tray n.
Click the Graphic tab to display the properties shown below.
Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If not, print quality may not be acheived as you want.
Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert
25 % and Gilbert 100 %.
Plain Paper: Normal plain paper. Select this type if your printer is
monochrome and printing on the 16 lb (60 g/m2) cotton paper.
Recycled Paper: 20 lb to 24 lb (75~90 g/m2) recycled paper.
Color Paper: 20 lb to 24 lb (75~90 g/m2) color-backgrounded
paper.
Archive Paper: If you need to keep print-out for a long period
time such as archives, select this option.
First Page
This property allows you to print the first page using a different
paper type from the rest of the document. You can select the
paper source for the first page.
For example, load thick stock for the first page into the Multi-
purpose Tray, and plain paper into Tray n. Then, select Tray n in
the Source option and Multi-Purpose Tray in the First Page
option. If this option does not appear, your printer does
not have this feature.
Resolution
The Resolution options you can select may vary
depending on your printer model. The higher the setting,
the sharper the clarity of printed characters and graphics. The
higher setting also may increase the time it takes to print a
document.
Scaling Printing
Scaling Printing allows you to automatically or manually scale
Image Mode
The available options are Normal and Text Enhance. Some
printers do not support this feature.
your print job on a page. You can choose from None
,
Reduce/
Enlarge, and Fit to Page
.
•
Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control panel of
the printer.
•
•
For details, see “Printing a Reduced or Enlarged Document” on
For details, see “Fitting Your Document to a Selected Paper
•
•
Normal: This setting is for normal documents.
Text Enhance: Image Mode allows the user to enhance
printouts.
Toner Save Mode
Selecting this option extends the life of your toner cartridge and
reduces your cost per page without a significant reduction in print
quality. Some printers do not support this feature.
•
Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control panel of
the printer.
•
•
On: Select this option to allow the printer to use less toner on
each page.
Off: If you don’t need to save toner when printing a document,
select this option.
15
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Options
Extras Tab
You can select output options for your document. See “Printing
a Document” on page 12 for more information about accessing
the printer properties.
You can set advanced settings by clicking the Advanced
Options button.
•
TrueType Options: This option determines what the driver
tells the printer about how to image the text in your document.
Select the appropriate setting according to the status of your
document.
Click the Extras tab to access the following feature:
-
Download as Outline: When this option is selected, the
driver will download any TrueType fonts that are used in your
document not already stored (resident) on your printer. If,
after printing a document, you find that the fonts did not print
correctly, choose Download as bit image and resubmit your
print job. The Download as bit image setting is often useful
when printing Adobe. This feature is available only
when you use the PCL printer driver.
-
-
Download as Bitmap: When this option is selected, the
driver will download the font data as bitmap images.
Documents with complicated fonts, such as Korean or
Chinese, or various other fonts, will print faster in this setting.
Print as Graphics: When this option is selected, the driver
will download any fonts as graphics. When printing documents
with high graphic content and relatively few TrueType fonts,
printing performance (speed) may be enhanced in this
setting.
•
•
Print All Text To Black: When the Print All Text To
Black option is checked, all text in your document prints solid
black, regardless of the color it appears on the screen.
Print All Text To Darken: When the Print All Text To
Darken option is checked, all text in your document is allowed
to print darker than on a normal document. Some printers do
not support this feature.
Watermark
You can create a background text image to be printed on each
Overlay
Overlays are often used to take the place of preprinted forms and
Output Options
•
Print Subset: You can set the sequence in which the pages
print. Select the print order from the drop-down list.
-
-
-
-
Normal (1,2,3): Your printer prints all pages from the first
page to the last page.
Reverse All Pages (3,2,1): Your printer prints all pages
from the last page to the first page.
Print Odd Pages: Your printer prints only the odd numbered
pages of the document.
Print Even Pages: Your printer prints only the even
numbered pages of the document.
•
Use Printer Fonts: When Use Printer Fonts is checked, the
printer uses the fonts that are stored in its memory (resident
fonts) to print your document, rather than downloading the
fonts used in your document. Because downloading fonts takes
time, selecting this option can speed up your printing time.
When using Printer fonts, the printer will try to match the fonts
used in your document to those stored in its memory. If,
however, you use fonts in your document that are very different
from those resident in the printer, your printed output will
appear very different from what it looks like on the screen.
This feature is available only when you use the PCL
printer driver.
16
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
About Tab
Using a Favorite Setting
Use the About tab to display the copyright notice and the
version number of the driver. If you have an Internet browser,
you can connect to the Internet by clicking on the web site icon.
See “Printing a Document” on page 12 for more information
about accessing printer properties.
The Favorites option, which is visible on each properties tab,
allows you to save the current properties settings for future
use.
To save a Favorites item:
1
2
Change the settings as needed on each tab.
Enter a name for the item in the Favorites input box.
Printer Tab
If you access printer properties through the Printers folder,
you can view the Printer tab. You can set the printer
configuration.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
1
2
3
4
Click the Windows Start menu.
Select Printers and Faxes
.
3
Click Save.
Select your printer driver icon.
When you save Favorites, all current driver settings are
saved.
Right-click on the printer driver icon and select
Properties
.
To use a saved setting, select the item from the Favorites drop
down list. The printer is now set to print according to the
Favorites setting you selected.
5
Click the Printer tab and set the options.
To delete a Favorites item, select it from the list and click
Delete
.
You can also restore the printer driver’s default settings by
selecting Printer Default from the list.
Using Help
Your printer has a help screen that can be activated by clicking
the Help button in the printer properties window. These help
screens give detailed information about the printer features
provided by the printer driver.
You can also click
from the upper right corner of the window,
and then click on any setting.
17
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Advanced Printing
This chapter explains printing options and advanced printing
tasks.
Printing Multiple Pages on One
Sheet of Paper (N-Up Printing)
You can select the number of pages to print on a single sheet
of paper. To print more than one page per sheet, the pages will
be reduced in size and arranged in the order you specify. You
can print up to 16 pages on one sheet.
1
3
2
4
NOTE
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
3
From the Layout tab, choose Multiple Pages per Side in
the Layout Type drop-down list.
Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down
list.
This chapter includes:
4
Select the page order from the Page Order drop-down
list, if necessary.
Check Print Page Border to print a border around each
page on the sheet.
Click the Paper tab, select the paper source, size, and
type.
5
6
Click OK and print the document.
18
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Posters
Printing Booklets
This feature allows you to print a single-page document onto 4,
9, or 16 sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
9
9
8
8
NOTE: The poster printing option is available when 600 dpi is
selected in the resolution option on the Graphic tab.
This printer feature allows you to print your document on both
sides of the paper and arranges the pages so that the paper can
be folded in half after printing to produce a booklet.
1
To change the print settings from your software
application, access printer properties. See “Printing a
1
To change the print settings from your software
application, access the printer properties. See “Printing a
2
3
Click the Layout tab, select Poster Printing in the
Layout Type drop-down list.
Configure the poster option:
2
From the Layout tab, choose Booklet Printing from the
Layout Type drop-down list.
You can select the page layout from Poster<2x2>
Poster<3x3> or Poster<4x4>. If you select
Poster<2x2>, the output will be automatically stretched
to cover 4 physical pages.
,
NOTE: The Booklet Printing option is not available for all
paper sizes. In order to find out the available paper size for
this feature, select the paper size in the Size option on the
Paper tab, then check if the Booklet Printing in a Layout
Type drop-down list on the Layout tab is activated.
3
Click the Paper tab, and select the paper source, size, and
type.
4
5
Click OK and print the document.
After printing, fold and staple the pages.
Specify an overlap in millimeters or inches to make it
easier to pasting the sheets together.
0.15 inches
0.15 inches
4
5
Click the Paper tab, select the paper source, size, and
type.
Click OK and print the document. You can complete the
poster by pasting the sheets together.
19
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on Both Sides of Paper
Printing a Reduced or Enlarged
Document
You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
You can change the size of a page’s content to appear larger or
smaller on the printed page.
The options are:
•
Printer Setting, if you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer. If this option does not appear,
your printer does not have this feature.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
3
From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
Enter the scaling rate in the Percentage input box.
•
•
None
Long Edge, which is the conventional layout used in
book binding.
You can also click the
or
button.
•
Short Edge, which is the type often used with calendars.
4
5
Select the paper source, size, and type in Paper Options.
2
Click OK and print the document.
2
3
2
5
3
3
2
5
5
3
5
Fitting Your Document to a
Selected Paper Size
▲
Long Edge
▲
Short Edge
•
Reverse Duplex Printing, allows you to select general
print order compare to duplex print order. If this option
does not appear, your printer does not have this
feature.
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
A
NOTE: If back of printouts are dirty, change the paper type to
Recycled paper from Printer settings. see page 15.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
3
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
Select the correct size from the Output size drop-down
list.
NOTE: Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the
printer may result.
4
5
Select the paper source, size, and type in Paper Options.
Click OK and print the document.
1
To change the print settings from your software
application, access printer properties. “Printing a
2
3
From the Layout tab, select the paper orientation.
From the Double-sided Printing section, select the
binding option you want.
4
5
Click the Paper tab and select the paper source, size, and
type.
Click OK and print the document.
NOTE: If your printer does not have a duplex unit, you should
complete the printing job manually. The printer prints every
other page of the document first. After printing the first side of
your job, the Printing Tip window appears. Follow the on-
screen instructions to complete the printing job.
20
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Watermark
Using Watermarks
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Select the watermark you want to edit from the Current
Watermarks list and change the watermark message and
options.
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray
letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally
across the first page or all pages of a document.
There are several predefined watermarks that come with the
printer, and they can be modified, or you can add new ones to
the list.
4
5
Click Update to save the changes.
Click OK until you exit the Print window.
Using an Existing Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab, and select the desired watermark
from the Watermark drop-down list. You will see the
selected watermark in the preview image.
Deleting a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Extras tab, click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Click OK and start printing.
NOTE: The preview image shows how the page will look when
it is printed.
3
4
Select the watermark you want to delete from the Current
Watermarks list and click Delete
Click OK until you exit the Print window.
.
Creating a Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab, and click the Edit button in the
Watermark section. The Edit Watermark window
appears.
Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays
in the preview window.
When the First Page Only box is checked, the watermark
prints on the first page only.
4
Select watermark options.
You can select the font name, style, size, or grayscale level
from the Font Attributes section and set the angle of the
watermark from the Message Angle section.
5
6
Click Add to add a new watermark to the list.
When you have finished editing, click OK and start
printing.
To stop printing the watermark, select (No Watermark) from
the Watermark drop-down list.
21
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Page Overlay
After an overlay has been created, it is ready to be printed with
your document. To print an overlay with a document:
Using Overlays
1
2
Create or open the document you want to print.
What is an Overlay?
To change the print settings from your software
application, access printer properties. See “Printing a
An overlay is text and/or images stored in the computer hard
disk drive (HDD) as a special file format that can be printed on
any document. Overlays are often used to take the place of
preprinted forms and letterhead paper. Rather than using
preprinted letterhead, you can create an overlay containing the
exact same information that is currently on your letterhead. To
print a letter with your company’s letterhead, you do not need
to load preprinted letterhead paper in the printer. You need only
tell the printer to print the letterhead overlay on your
document.
Dear ABC
3
4
Click the Extras tab.
Select the desired overlay from the Overlay drop-down
list box.
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and
select the overlay file.
Regards
WORLD BEST
5
If you have stored the overlay file you want to use in an
external source, you can also load the file when you access
the Load Overlay window.
Creating a New Page Overlay
To use a page overlay, you must create a new page overlay
containing your logo or image.
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the
overlay from the Overlay List box.
6
7
If necessary, click Confirm Page Overlay When
Printing. If this box is checked, a message window
appears each time you submit a document for printing,
asking you to confirm your wish to print an overlay on your
document.
1
Create or open a document containing text or an image for
use in a new page overlay. Position the items exactly as
you wish them to appear when printed as an overlay.
To save the document as an overlay, access printer
Click the Extras tab, and click Edit button in the Overlay
section.
WORLD BEST
2
3
If this box is not checked and an overlay has been
selected, the overlay automatically prints with your
document.
4
5
In the Edit Overlay window, click Create Overlay.
Click OK or Yes until printing begins.
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
The selected overlay downloads with your print job and
prints on your document.
6
7
Click Save. The name appears on the Overlay List box.
NOTE: The resolution of the overlay document must be the
same as that of the document you will print with the overlay.
Click OK or Yes to finish creating.
The file is not printed. Instead it is stored on your
computer hard disk drive.
Deleting a Page Overlay
You can delete page overlays that you no longer use.
NOTE: The overlay document size must be the same as the
documents you print with the overlay. Do not create an overlay
with a watermark.
1
2
3
In the printer properties window, click the Extras tab.
Click the Edit button in the Overlay section.
Select the overlay you want to delete from the Overlay
List box.
4
5
6
Click Delete Overlay.
When a confirming message window appears, click Yes
.
Click OK until you exit the Print window.
22
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
You can use advanced settings by clicking the Advanced
button.
4
Using Windows
PostScript Driver
If you want to use the PostScript driver provided with your
system CD-ROM to print a document.
PPD’s, in combination with the PostScript driver, access printer
features and allow the computer to communicate with the
printer. An installation program for the PPD’s is provided on the
supplied software CD-ROM.
Printer Settings
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows XP.
•
•
•
Paper/Output this option allows you to select the size of the
paper loaded in the tray.
Graphic this option allows you to adjust the print quality for
your specific printing needs.
Document Options this options allow you to set the PostScript
options or printer features.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
NOTES
:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
Using Help
You can click
then click on any setting.
from the upper right corner of the window, and
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.
23
Using Windows PostScript Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Sharing the Printer
Locally
You can connect the printer directly to a selected computer,
which is called “host computer,” on the network.
Setting Up a Host Computer
1
2
3
4
5
6
Start Windows.
From the Start menu select Printers and Faxes
.
Double-click your printer driver icon
.
From the Printer menu, select Sharing
.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
Check the Share this printer box.
Fill in the Shared Name field, and then click OK
.
NOTES
:
• Check the Operating System(s) that are compatible with
your printer. Please refer to the OS Compatibility section of
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
Setting Up a Client Computer
1
2
Right-click the Windows Start button and select Explore.
Select My Network Places and then right-click Search
for Computers
.
3
Fill in the IP address of host computer in Computer name
field, and click Search. (In case host computer requires
User name and Password, fill in User ID and password
of host computer account.)
4
5
6
Double-click Printers and Faxes
Right-click printer driver icon, select Connect
Click Yes, if the installation confirm message appears.
.
.
24
Sharing the Printer Locally
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are a Windows user, from the Start menu, select
Programs or All Programs your printer driver name
→
→
6
Using Smart Panel
Smart Panel is a program that monitors and informs you of the
status of the printer, and allows you to customize the printer’s
settings. Smart Panel is installed automatically when you
install the printer software.
Smart Panel
.
NOTES:
• If you have already installed more than one Samsung
printer, first select the printer model you want in order to
use the corresponding Smart Panel. Right-click (in Windows
or Linux) or click (in Mac OS X) the Smart Panel icon and
select your printer name
.
NOTES:
• The Smart Panel window and its contents shown in this
Software User’s Guide may differ depending on the printer or
Operating System in use.
• To use this program, you need:
- To check for Operating System(s) that are compatible with
your printer, refer to Printer Specifications in your Printer
User’s Guide.
The Smart Panel program displays the current status of the
printer, the level of toner remaining in the toner cartridge(s)
and various other information. You can also change settings.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with
your printer, refer to Printer Specifications in your Printer
User’s Guide.
- Internet Explorer version 5.0 or higher for flash animation
in HTML Help.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
1
Understanding Smart Panel
If an error occurs while printing, Smart Panel appears
automatically, showing the error.
1
Toner Level
You can view the level of toner remaining in the toner
cartridge(s). The printer and the number of toner cartridge(s)
shown in the above window may differ depending on the printer in
use. Any printers do not have this feature.
You can also launch Smart Panel manually. Double-click the
Smart Panel icon on the Windows task bar (in Windows), or
Notification Area (in Linux). You can also click it on the status
bar (in Mac OS X).
Buy Now
You can order replacement toner cartridge(s) online.
Double-click this icon in Windows.
Troubleshooting Guide
You can view Help to solve problems.
Printer Setting
You can configure various printer settings in the Printer Settings
Utility window. Any printers do not have this feature.
Click this icon in Mac OS X.
NOTE: If your printer is connected to a network and you are a
Windows and Mac OS X user, the SyncThru Web Service
window appears instead of the Printer Settings Utility window.
Linux does not support network environments.
Click this icon in Linux.
Driver Setting (Only for Windows)
You can use the printer properties window, which allows you to
access all of the printer options you need for using your
25
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening the Troubleshooting
Guide
Changing the Smart Panel
Program Settings
Using the troubleshooting guide, you can view solutions for
error status problems.
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Options
.
Right-click (in Windows or Linux) or click (in Mac OS X) the
Select the settings you want from the Options window.
Smart Panel icon and select Troubleshooting Guide
.
Using Printer Settings Utility
Using the Printer Settings Utility, you can configure and check
print settings.
1
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Printer Setting
.
2
3
Change the settings.
To send the changes to the printer, click the Apply button.
NOTES: If your printer is connected to a network, the
SyncThru Web Service window appears instead of the
Printer Settings Utility window.
Using Onscreen Help File
For more information about Printer Settings Utility, click
.
26
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using Your Printer in
Linux
Installing the Unified Linux
Driver
You can use your machine in a Linux environment.
Installing the Unified Linux Driver
1
Make sure that you connect your machine to your
computer. Turn both the computer and the machine on.
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
This chapter includes:
2
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
3
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
Getting Started
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
The supplied CD-ROM provides you with Samsung’s Unified
Linux Driver package for using your machine with a Linux
computer.
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
After the driver is installed on your Linux system, the driver
package allows you to monitor a number of machine devices via
fast ECP parallel ports and USB simultaneously.
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
The Unified Linux Driver package is supplied with a smart and
flexible installation program. You don't need to search for
additional components that might be necessary for the Unified
Linux Driver software: all required packages will be carried onto
your system and installed automatically; this is possible on a
wide set of the most popular Linux clones.
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
4
When the welcome screen appears, click Next.
27
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When the installation is complete, click Finish.
Uninstalling the Unified Linux Driver
1
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
The installation program has added the Unified Driver
Configurator desktop icon and Samsung Unified Driver
group to the system menu for your convenience. If you
have any difficulties, consult the onscreen help that is
available through your system menu or can otherwise be
called from the driver package windows applications,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
such as Unified Driver Configurator
.
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
3
4
Click Uninstall
Click Next
.
.
5
Click Finish.
28
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers Configuration
Printers configuration has the two tabs: Printers and Classes
.
Using the Unified Driver
Configurator
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Switches to Printer
configuration.
Opening the Unified Driver
Configurator
Shows all of the
installed printer.
1
Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver
Configurator
Press each button on the Modules pane to switch to the
corresponding configuration window.
.
Shows the status,
model name and
URI of your printer.
2
You can use the following printer control buttons:
Printers Configuration button
Ports Configuration button
•
•
•
•
Refresh: renews the available printers list.
Add Printer: allows you to add a new printer.
Remove Printer: removes the selected printer.
Set as Default: sets the current printer as a default
printer.
•
•
Stop/Start: stops/starts the printer.
Test: allows you to print a test page to check if the
machine is working properly.
•
Properties: allows you to view and change the printer
properties. For details, see page 30.
You can use the onscreen help by clicking Help
After changing the configurations, click Exit to close the
Unified Driver Configurator.
.
3
29
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Classes Tab
The Classes tab shows a list of available printer classes.
Configuring Printer Properties
Using the properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
1
Open the Unified Driver Configurator.
Shows all of the
printer classes.
If necessary, switch to Printers configuration.
Select your machine on the available printers list and click
2
3
Properties
.
The Printer Properties window opens.
Shows the status of the
class and the number of
printers in the class.
•
•
•
Refresh : Renews the classes list.
Add Class... : Allows you to add a new printer class.
Remove Class : Removes the selected printer class.
The following five tabs display at the top of the window:
Ports Configuration
In this window, you can view the list of available ports, check
the status of each port and release a port that is stalled in busy
state when its owner is terminated for any reason.
•
General: allows you to change the printer location and
name. The name entered in this tab displays on the
printer list in Printers configuration.
Connection: allows you to view or select another port. If
you change the printer port from USB to parallel or vice
versa while in use, you must re-configure the printer port
in this tab.
•
•
•
•
Driver: allows you to view or select another printer
driver. By clicking Options, you can set the default
device options.
Jobs: shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or
click Remove from Class to remove the printer from the
selected class.
Switches to
ports
configuration.
Shows all of the
available ports.
Shows the port type,
device connected to
the port and status
4
Click OK to apply the changes and close the Printer
Properties Window.
•
•
Refresh : Renews the available ports list.
Release port : Releases the selected port.
30
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper
type, and the orientation of the documents, enables the
duplex feature, adds start and end banners, and changes
the number of pages per sheet.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to
print from using Common UNIX Printing System (CUPS). You
can print on your machine from any such application.
•
Text - allows you to specify the page margins and set the
text options, such as spacing or columns.
•
Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size, or image position.
1
From the application you are using, select Print from the
File menu.
•Device: allows you to set the print resolution, paper
source, and destination.
2
3
Select Print directly using lpr
In the LPR GUI window, select the model name of your
machine from the Printer list and click Properties
.
5
Click Apply to apply the changes and close the Properties
window.
Click OK in the LPR GUI window to start printing.
.
6
7
The Printing window appears, allowing you to monitor the
status of your print job.
Click.
To abort the current job, click Cancel
.
Printing Files
You can print many different types of files on the Samsung
machine device using the standard CUPS way - directly from
the command line interface. The CUPS lpr utility allows you do
that. But the drivers package replaces the standard lpr tool by
a much more user-friendly LPR GUI program.
To print any document file:
1
Type lpr <file_name> from the Linux shell command
line and press Enter. The LPR GUI window appears.
4
Change the printer and print job properties.
When you type only lpr and press Enter, the Select
file(s) to print window appears first. Just select any files
you want to print and click Open
.
2
3
In the LPR GUI window, select your printer from the list,
and change the printer and print job properties.
For details about the properties window, see page 31.
Click OK to start printing.
31
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
Installing Software
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Printer driver
NOTE: Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
Installing the printer driver
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
3
Turn on your computer and the machine.
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
Double-click the Samsung_LBP on your Macintosh
desktop.
This chapter includes:
• Printing
4
5
6
7
Double-click the MAC_Installer folder.
Double-click the MAC_Printer folder.
For Mac OS 8.6~9.2, double-click the Samsung_LBP
Installer Classic icon.
For Mac OS 10.1 or higher, double-click the
Samsung_LBP Installer OSX icon.
8
9
Click Continue
.
Click Install
.
10After the installation is finished, click Quit.
Uninstalling the printer driver
1
2
3
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the Samsung_LBP on your Macintosh
desktop.
4
5
6
Double-click the MAC_Installer folder.
Double-click the MAC_Printer folder.
For Mac OS 8.6~9.2, double-click the Samsung_LBP
Installer Classic icon.
For Mac OS 10.1 or higher, double-click the
Samsung_LBP Installer OSX icon.
7
8
9
Select Uninstall and then click Uninstall
Click Continue
When the uninstallation is done, click Quit
.
.
.
32
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
• For MAC OS 10.5, click Default and find the Bonjour
.
The name of your machine appears on the list. Select
SEC000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your machine.
If Auto Select does not work properly, select Samsung in
Printer Model and your printer name in Model Name
Setting Up the Printer
Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.
5
6
.
Your machine appears on the Printer List and is set as the
default printer.
For a Network-connected
• For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
in Print Using
.
NOTE Some printers do not support a network
:
Click Add
.
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User’s
Guide.
For a USB-connected
Mac OS 10.1 or higher
Mac OS 8.6 ~ 9.2
1
2
Follow the instructions on “Installing Software” on page 32
to install the PPD file on your computer.
1
Follow the instructions on “Installing Software” on page 32
to install the PPD file on your computer.
Open the Applications folder
Setup Utility
• For MAC OS 10.5, open System Preferences from the
→
Utilities, and Print
.
2
3
From the Apple menu, select Chooser.
Click LaserWriter 8 (the PostScript driver provided with
your Macintosh).
Applications folder, and click Printer & Fax
.
3
4
Click Add on the Printer List
.
The name of your machine appears on the list.
• For MAC OS 10.5, press the “+” icon then a display
4
Select SEC000xxxxxxxxx from the printer box (where
the xxxxxxxxx varies depending on each of the machines)
window will pop up.
Select the USB tab.
and Click Select
If Auto Setup does not work properly, click Select PPD
choose your printer name, and click OK
.
• For MAC OS 10.4, click Default Browser and find the
USB connection.
,
.
5
When the setup is complete, you see your machine icon
created as a desktop printer.
• For MAC OS 10.5, click Default and find the USB
connection.
5
6
Select your printer name and click Add
If Auto Select does not work properly, select Samsung in
Printer Model and your printer name in Model Name
.
6
7
Close the Chooser
When a message window appears telling you that you
have changed your current machine, click OK
.
.
.
Your machine appears on the Printer List and is set as the
default printer.
Mac OS 10.1 or higher
• For MAC OS 10.5, if Auto Select does not work properly,
select Select a driver to use... and your printer name
1
2
Follow the instructions on “Installing Software” on page 32
to install the PPD file on your computer.
in Print Using
.
7
Click Add
.
Open the Applications folder
Setup Utility
• For MAC OS 10.5, open System Preferences from the
→
Utilities, and Print
.
Applications folder, and click Printer & Fax
.
3
4
Click Add on the Printer List
.
• For MAC OS 10.5, press the “
window will pop up.
Select the AppleTalk tab.
+” icon then a display
• For MAC OS 10.3, select the Rendezvous tab.
• For MAC OS 10.4, click Default Browser and find the
Bonjour
.
33
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Printer Settings
You can use advanced printing features when using your
printer.
Printing
From your Macintosh application, select Print from the File
menu. The printer name which appears in the printer properties
window may differ depending on the printer in use. Except for
the name, the composition of the printer properties window is
similar.
NOTES
:
• The Macintosh printer’s properties window that appears in
this User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• You can check your printer name in the supplied CD-
ROM.
NOTE: The setting options may differ depending on printers
and Macintosh OS version.
Layout
Printing a Document
The Layout tab provides options to adjust how the document
appears on the printed page. You can print multiple pages on
one sheet of paper. Select Layout from the Presets drop-down
list to access the following features.
When you print with a Macintosh, you need to check the printer
software setting in each application you use. Follow these steps
to print from a Macintosh.
1
2
3
Open a Macintosh application and select the file you want
to print.
Open the File menu and click Page Setup (Document
Setup in some applications).
Choose your paper size, orientation, scaling, and other
options and click OK
.
Make sure that your
printer is selected.
•
Pages per Sheet: This feature determines how many
pages printed on one page. For details, see "Printing
Multiple Pages on One Sheet of Paper" on the next
column.
•Layout Direction: You can select the printing direction
on a page as like the examples on UI.
4
5
Open the File menu and click Print.
Choose the number of copies you want and indicate which
pages you want to print.
6
Click Print when you finish setting the options.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphics
Printer Features
The Graphics tab provides options for selecting
Resolution(Quality). Select Graphics form the Presets
drop-down list to access the graphic features.
This tab provides options for selecting the paper type and
adjusting print quality. Select Printer Features from the
Presets' drop-down list to access the following features:
'
•
Reverse Duplex Printing: Allows you to select general
print order compare to duplex print order.
•
Resolution(Quality): You can select the printing
resolution. The higher the setting, the sharper the clarity
of printed characters and graphics. The higher setting
also may increase the time it takes to print a document.
•
Fit to Page: This setting allows you to scale your print
job to any selected paper size regardless of the digital
document size. This can be useful when you want to
check fine details on a small document.
Paper
•
Image Mode: mage Mode allows the user to enhance
printouts. The available options are Normal and Text
Enhance.
Set Paper Type to correspond to the paper loaded in the tray
from which you want to print. This will let you get the best
quality printout. If you load a different type of print material,
select the corresponding paper type.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Multiple Pages on One Sheet
of Paper
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
Duplex Printing
You can print on both sides of the paper. Before printing in the
duplex mode, decide on which edge you will be binding your
finished document. The binding options are:
Long-Edge Binding: Which is the conventional layout
used in book binding.
1
2
From your Macintosh application, select Print from the
File menu.
Select Layout
.
Short-Edge Binding: Which is the type often used with
calendars.
1
2
From your Macintosh application, select Print from the
File menu.
Select the Layout
.
3
4
Select the number of pages you want to print on one sheet
of paper on the Pages per Sheet drop-down list.
Select the page order from the Layout Direction option.
To print a border around each page on the sheet, select
the option you want from the Border drop-down list.
5
Click Print, and the printer prints the selected number of
pages on one side of each page.
3
4
Select a binding orientation from Two Sided Printing
option.
Click Print and the printer prints on both sides of the
paper.
CAUTION If you have selected duplex printing and
:
then try to print multiple copies of a document, the
printer may not print the document in the way you
want. In case of "Collated copy" , if your document has
odd pages, the last page of the first copy and the first
page of the next copy will be printed on the front and
back of one sheet. In case of "Uncollated copy", the
same page will be printed on the front and back of one
sheet. Therefore, if you need multiple copies of a
document and you want those copies on both sides of
the paper, you must print them one at a time, as
separate print jobs
.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION
INDEX
PostScript driver
installing 23
print
A
L
advanced printing, use 18
language, change 10
Layout properties, set
Windows 14
document 12
fit to page 20
from Macintosh 34
from Windows 12
N-up
Macintosh 36
Windows 18
overlay 22
B
Linux
driver, install 27
printer properties 30
printing 31
booklet printing 19
D
document, print
Macintosh 34
M
Macintosh
driver
poster 21
PRN 13
scaling 20
Windows 12
double-sided printing 20
driver, install
install 32
printing 34
setting up the printer 33
watermark 21
print resolution 31
printer driver, install
Linux 27
Linux 27
E
printer properties
Linux 31
printer properties, set
Macintosh 34
printer resolution, set
Windows 15
N
Extras properties, set 16
n-up printing
Macintosh 36
Windows 18
F
favorites settings, use 17
O
printer software
install
orientation, print 31
Windows 14
overlay
G
Macintosh 32
Graphics properties, set 15
Windows
uninstall
Windows 11
printing
create 22
delete 22
print 22
H
booklets 19
double-sided 20
from Linux 31
P
I
install
Paper properties, set 14
paper size, set 14
print 31
R
printer driver
Macintosh 32
resolution
printing 31
paper source, set 31
Windows 15
paper type, set
Macintosh 35
Windows
installing
Linux software 27
S
setting
print 31
poster, print 19
darkness 15
37
Download from Www.Somanuals.com. All Manuals Search And Download.
favorites 17
image mode 15
resolution
Windows 15
toner save 15
true-type option 15
software
install
Macintosh 32
Windows
reinstall
Windows 10
system requirements
Macintosh 32
uninstall
Windows 11
status monitor, use 25
T
toner save, set 15
U
uninstall, software
Windows 11
uninstalling
driver
Linux 28
W
watermark
create 21
delete 21
edit 21
print 21
38
Download from Www.Somanuals.com. All Manuals Search And Download.
GGGGGGGGGGGGGRev. 5.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|