Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding Samsung products,
contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
NETHERLANDS 0900 20 200 88
(€ 0,10/min)
www.samsung.com/nl
Country
CANADA
Customer Care Center
Web Site
1-800-SAMSUNG
(7267864)
www.samsung.com/ca
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
231 627 22
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
MEXICO
U.S.A
01-800-SAMSUNG
(7267864)
www.samsung.com/mx
www.samsung.com
1-800-SAMSUNG
(7267864)
ARGENTINE
BRAZIL
0800-333-3733
0800-124-421
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
SWEDEN
U.K
CHILE
800-726-7864 (SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
RUSSIA
UKRAINE
AUSTRALIA
CHINA
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
800-810-5858
1-800-299-0013
1-800-234-7267
800-7267
010- 6475 1880
HONG KONG
INDIA
2862 6001
www.samsung.com/hk
www.samsung.com/in
PANAMA
3030 8282
1600 1100 11
PUERTO RICO
1-800-682-3180
INDONESIA
JAPAN
0800-112-8888
0120-327-527
1800-88-9999
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
REP. DOMINICA 1-800-751-2676
TRINIDAD &
TOBAGO
1-800-7267-864
MALAYSIA
PHILIPPINES
VENEZUELA
BELGIUM
1-800-100-5303
02 201 2418
844 000 844
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
1800-10-SAMSUNG
(7267864)
SINGAPORE
THAILAND
1800-SAMSUNG (7267864) www.samsung.com/sg
CZECH
REPUBLIC
1800-29-3232
02-689-3232
www.samsung.com/th
DENMARK
FINLAND
FRANCE
38 322 887
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
09 693 79 554
TAIWAN
0800-329-999
1 800 588 889
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
08 25 08 65 65
(€ 0,15/min)
VIETNAM
SOUTH AFRICA 0860 7267864 (SAMSUNG)
U.A.E 800SAMSUNG (7267864)
GERMANY
01805 - 121213
(€ 0,12/min)
www.samsung.de
HUNGARY
ITALIA
06 40 985 985
199 153 153
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
LUXEMBURG
02 261 03 710
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Special features ...................................................................................................................................................... 1.1
Printer overview ...................................................................................................................................................... 1.2
Understanding the Status LED ............................................................................................................................... 1.5
Finding more information ........................................................................................................................................ 1.5
Menu overview ........................................................................................................................................................ 2.1
Setting the date and time ........................................................................................................................................ 2.2
Changing the default mode (CLX-3160FN only) ..................................................................................................... 2.2
Setting sounds (CLX-3160FN only) ........................................................................................................................ 2.3
Entering characters using the number keypad ........................................................................................................ 2.3
Using the save modes ............................................................................................................................................. 2.4
System requirements .............................................................................................................................................. 3.2
Supported operating systems ................................................................................................................................. 4.1
Configuring TCP/IP ................................................................................................................................................. 4.1
Restoring the network configuration ........................................................................................................................ 4.2
Loading paper ......................................................................................................................................................... 5.6
Setting the paper size and type ............................................................................................................................... 5.9
Selecting the paper tray .......................................................................................................................................... 6.1
Using special copy features .................................................................................................................................... 6.2
Setting copy timeout ................................................................................................................................................ 6.5
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a document ................................................................................................................................................ 7.1
Canceling a print job ............................................................................................................................................... 7.1
Scanning using a network connection ..................................................................................................................... 8.2
Setting up Address Book ......................................................................................................................................... 8.4
Setting the fax header ............................................................................................................................................. 9.1
Adjusting the document settings ............................................................................................................................. 9.1
Sending a fax automatically .................................................................................................................................... 9.2
Redialing the last number ....................................................................................................................................... 9.3
Selecting the paper tray .......................................................................................................................................... 9.3
Receiving automatically in Fax mode ..................................................................................................................... 9.4
Receiving manually in Tel mode ............................................................................................................................. 9.4
Receiving manually using an extension telephone ................................................................................................. 9.4
Receiving automatically in Ans/Fax mode .............................................................................................................. 9.4
Receiving faxes using DRPD mode ........................................................................................................................ 9.4
Receiving in secure receiving mode ....................................................................................................................... 9.5
Sending a fax to multiple destinations ..................................................................................................................... 9.6
Sending a delayed fax ............................................................................................................................................. 9.6
Sending a priority fax .............................................................................................................................................. 9.7
10. Fax setup (CLX-3160FN only)
Changing the fax setup options ............................................................................................................................. 10.1
Printing sent fax report automatically .................................................................................................................... 10.2
Setting up Address Book ....................................................................................................................................... 10.3
About USB memory .............................................................................................................................................. 11.1
Plugging in a USB memory device ........................................................................................................................ 11.1
Scanning to a USB memory device ...................................................................................................................... 11.2
Backing up data .................................................................................................................................................... 11.3
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
How to purchase ................................................................................................................................................... 12.1
Cleaning your machine ......................................................................................................................................... 13.2
Maintaining the toner cartridge .............................................................................................................................. 13.4
Maintenance Parts .............................................................................................................................................. 13.10
Managing your machine from the website .......................................................................................................... 13.11
Checking the machine’s serial number ............................................................................................................... 13.11
Clearing document jams ....................................................................................................................................... 14.1
Understanding display messages ......................................................................................................................... 14.5
Solving other problems ......................................................................................................................................... 14.8
Scanner and copier specifications ........................................................................................................................ 15.2
Facsimile specifications (CLX-3160FN only) ........................................................................................................ 15.2
v
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Avoid using this machine during a lightning storm. There may be a remote risk of
electric shock from lightning. If possible, unplug the AC power and telephone cord
for the duration of the lightning storm.
Important Precautions and Safety Information
When using this machine, these basic safety precautions should always be followed to
reduce risk of fire, electric shock and injury to people:
17 The Power cord supplied with your machine should be used for safe operation. If
you are using a cord which is longer than 2 m with 110 V machine, then it should
1. Read and understand all instructions.
be 16 AWGa or bigger.
2. Use common sense whenever operating electrical appliances.
18. Use only No.26 AWG* or larger telephone line cord.
19. SAVE THESE INSTRUCTIONS.
3. Follow all warnings and instructions marked on the machine and in the literature
accompanying the machine.
4. If an operating instruction appears to conflict with safety information, heed the
safety information. You may have misunderstood the operating instruction. If you
cannot resolve the conflict, contact your sales or service representative for
assistance.
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR,
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a
Class I laser product conforming to the requirements of IEC 825.
5. Unplug the machine from the AC wall socket and/or telephone jack before
cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
Class I laser products are not considered to be hazardous. The laser system and printer
are designed so there is never any human access to laser radiation above a Class I level
during normal operation, user maintenance or prescribed service condition.
6. Do not place the machine on an unstable cart, stand or table. It may fall, causing
serious damage.
WARNING
7. Your machine should never be placed on, near or over a radiator, heater, air
conditioner or ventilation duct.
Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
8. Do not allow anything to rest on the power. Do not locate your machine where the
cords will be abused by persons walking on them.
When using this product, these basic safety precautions should always be followed to
reduce risk of fire, electric shock, and injury to persons:
9. Do not overload wall outlets and extension cords. This can diminish performance,
and may result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, telephone or PC interface cords.
11. Never push objects of any kind into the machine through case or cabinet openings.
They may touch dangerous voltage points, creating a risk of fire or shock. Never
spill liquid of any kind onto or into the machine.
12. Your machine may have a heavy cover for optimal pressure on the document for
the best scanning and/or faxing (usually the flatbed-type machine). In this case,
replace the cover after placing document on the scan glass, by holding and moving
it down slowly until it seats on its location.
13. To reduce the risk of electric shock, do not disassemble the machine. Take it to a
qualified service technician when repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect reassembly
could cause electric shock when the unit is subsequently used.
14. Unplug the machine from the telephone jack, PC and AC wall outlet and refer
servicing to qualified service personnel under the following conditions:
•When any part of the power cord, plug or connecting cable is damaged or frayed.
•If liquid has been spilled into the machine.
•If the machine has been exposed to rain or water.
Ozone Safety
•If the machine does not operate properly after instructions have been followed.
•If the machine has been dropped, or the cabinet appears damaged.
•If the machine exhibits a sudden and distinct change in performance.
During normal operation, this machine produces ozone. The ozone
produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, please request your
nearest Samsung dealer.
15. Adjust only those controls covered by the operating instructions. Improper
adjustment of other controls may result in damage, and may require extensive work
by a qualified service technician to restore the machine to normal operation.
a AWG: American Wire Gauge
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Mercury Safety
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-
Samsung
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or experienced radio TV technician for help.
Power Saver
This printer contains advanced energy conservation technology that reduces power
consumption when it is not in active use.
CAUTION: Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the equipment.
When the printer does not receive data for an extended period of time, power
consumption is automatically lowered.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the interference-causing equipment standard entitled
“Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Recycling
Please recycle or dispose of the packaging material for this product
in an environmentally responsible manner.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
Fax Branding
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device to send any message via a telephone
facsimile machine unless such message clearly contains in a margin at the top or bottom
of each transmitted page or on the first page of the transmission the following
information:
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
(1) the date and time of transmission
(2) identification of either business, business entity or individual sending the message;
and
(3) telephone number of either the sending machine, business, business entity or
individual.
The Telephone Company may make changes in its communications facilities,
equipment operations or procedures where such action is reasonably required in the
operation of its business and is not inconsistent with the rules and regulations in FCC
Part 68. If such changes can be reasonably expected to render any customer terminal
equipment incompatible with telephone company communications facilities, or require
modification or alteration of such terminal equipment, or otherwise materially affect its
use or performance, the customer shall be given adequate notice in writing, to allow the
customer an opportunity to maintain uninterrupted service.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
Radio Frequency Emissions
Ringer Equivalence Number
FCC Information to the User
The Ringer Equivalence Number and FCC Registration Number for this machine may
be found on the label located on the bottom or rear of the machine. In some instances
you may need to provide these numbers to the telephone company.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
•This device may not cause harmful interference, and
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the
telephone line, and is useful for determining whether you have “overloaded” the line.
Installing several types of equipment on the same telephone line may result in problems
making and receiving telephone calls, especially ringing when your line is called. The
sum of all Ringer Equivalence Numbers of the equipment on your telephone line should
be less than five in order to assure proper service from the telephone company. In some
cases, a sum of five may not be usable on your line. If any of your telephone equipment
is not operating properly, you should immediately remove it from your telephone line, as
it may cause harm to the telephone network.
•This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
x
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING:
EC Certification
FCC Regulations state that changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
In the event that terminal equipment causes harm to the telephone network, the
telephone company should notify the customer that service may be stopped. However,
where prior notice is impractical, the company may temporarily cease service, providing
that they:
Certification to 1999/5/EC Radio Equipment & Telecommunications
Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single
terminal connection to the analogue public switched telephone network (PSTN) in
accordance with Directive 1999/5/EC. The product has been designed to work with the
national PSTNs and compatible PBXs of the European countries:
a) promptly notify the customer.
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics
Co., Ltd. in the first instance.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication
Commission pursuant to procedures set out in FCC Rules and Regulations Subpart E
of Part 68.
The product has been tested against TS 103 021. To assist in the use and application
of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document (EG
201 121) which contains notes and additional requirements to ensure network
compatibility of TS 103 021 terminals. The product has been designed against, and is
fully compliant with, all of the relevant advisory notes contained in this document.
You should also know that:
• Your machine is not designed to be connected to a digital PBX system.
• If you intend to use a computer modem or fax modem on the same phone line as
your machine, you may experience transmission and reception problems with all the
equipment. It is recommended that no other equipment, except for a regular
telephone, share the line with your machine.
Replacing the Fitted Plug (for UK Only)
IMPORTANT
• If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for both the power and the telephone
lines. Surge protectors can be purchased from your dealer or telephone and
electronic specialty stores.
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has
a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13
amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do
not use the plug until you have another fuse cover.
• When programming emergency numbers and/or making test calls to emergency
numbers, use a non-emergency number to advise the emergency service dispatcher
of your intentions. The dispatcher will give you further instructions on how to actually
test the emergency number.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.
You need to buy a suitable plug adaptor. Do not remove the moulded plug.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
WARNING
• You may safely connect this equipment to the telephone network by means of a
standard modular jack, USOC RJ-11C.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.
Declaration of Conformity (European Countries)
IMPORTANT WARNING: You must earth this machine.
The wires in the mains lead have the following color code:
Approvals and Certifications
• Green and Yellow:
• Blue:
Earth
Neutral
Live
The CE marking applied to this product symbolizes Samsung
Electronics Co., Ltd. Declaration of Conformity with the following
applicable 93/68/EEC Directives of the European Union as of the
dates indicated:
• Brown:
If the wires in the mains lead do not match the colors marked in your plug, do the
following:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the
member states related to low voltage equipment.
You must connect the green and yellow wire to the pin marked by the letter “E” or by the
safety ‘Earth symbol’ or colored green and yellow or green.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the
laws of the Member States related to electromagnetic compatibility.
You must connect the blue wire to the pin which is marked with the letter “N” or colored
black.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity.
You must connect the brown wire to the pin which is marked with the letter “L” or colored
red.
A full declaration, defining the relevant Directives and referenced standards can be
obtained from your Samsung Electronics Co., Ltd. representative.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Save time and money
• You can print multiple pages on one single sheet
1 Introduction
Thank you for purchasing this Samsung multifunctional product. Your
machine provides printing, copying, scanning, and faxing (CLX-3160FN
only) functions.
of paper to save paper.
• You can use preprinted forms and letterhead with
plain paper. See the Software Section.
This chapter includes:
• This machine automatically conserves
electricity by substantially reducing power
consumption when not in use.
•
•
•
•
Expand your machine’s capacity
• You can add a 250-sheet optional tray 2 to your
machine. This tray lets you add paper to the
machine less often.
• You can print images directly from a PictBridge-
compatible device.
Special features
Print in various environments
Your new machine is equipped with special features that improve print
quality. You can:
• You can print with Windows 98/Me/2000/XP (include 64bit).
• Your machine is compatible with a variety of Linux systems.
• Your machine is compatible with a variety of Macintosh systems.
• Your machine comes with a network interfaces.
Print with excellent quality and speed
• You can print in full range of colors using cyan,
magenta, yellow, and black.
• You can print with a resolution of up to 2400 dpi
[Best]. See the Software Section.
Use USB flash memory devices
If you have a USB memory device, you can use it in various ways with
your machine.
• In Black and White mode, your machine prints
A4-sized paper at up to 16 ppm and letter-sized
paper at up to 17 ppm. In Color mode, your
machine prints A4-sized or letter sized paper at
up to 4 ppm.
a
• You can scan documents and save them to the device.
• You can directly print data stored to the device.
You can back up data and restore backup files to the machine’s
memory.
Handle paper flexibly
• The manual feeder supports letterhead,
envelopes, labels, transparencies, custom-sized
media, postcards, and heavy paper. The manual
feeder holds up 1 sheet of paper.
Machine features
The table below lists a general overview of features supported by your
machine.
• The 150-sheet tray 1 and 250-sheet optional
(I: Installed, O: Option, NA: Not Available)
tray 2 support plain paper in various sizes.
Features
CLX-3160N
CLX-3160FN
Create professional documents
USB 2.0
I
I
I
I
• Print Watermarks. You can customize your
documents with words, such as “Confidential.”
See the Software Section.
USB Memory
Network Interface
I
I
• Print Posters. The text and pictures of each page
of your document are magnified and printed
across the sheet of paper and can then be taped
together to form a poster. See the Software
Section.
(Ethernet 10/100 Base TX)
Fax Function
PictBridge
NA
I
I
I
a. pages per minute
1.1
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer overview
These are the main components of your machine:
Front view
Rear view
* The figure above shows an CLX-3160FN with
all available accessories.
extension telephone
socket (EXT)
1
2
3
4
5
6
7
power receptacle
a
network port
USB port
telephone line socket
power switch
rear cover
a
(LINE)
* The figure above shows an CLX-3160FN
with all available accessories.
a. CLX-3160FN only.
ADF (automatic
document feeder)
1
2
3
10
11
12
tray 1
a
document width guides
output support
manual feeder paper
width guides
document input tray
4
5
6
7
8
9
document output tray
control panel
13
14
15
16
17
18
manual feeder
scanner lid
output tray
scanner glass
waste toner container
toner cartridge
imaging unit
USB memory port
front cover
optional tray 2
a. Automatic document feeder is used as ADF in this user’s guide.
1.2
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel overview(CLX-3160FN)
Speed buttons: Allows you to store frequently-dialed fax numbers
and enter them with the touch of a few buttons.
1
13
14
Back: Sends you back to the upper menu level.
Shift: Allows you to shift the speed buttons to access numbers 16
through 30.
2
Address Book: Allows you to store frequently used fax numbers in
memory or search for stored fax numbers or email addresses.
3
15
16
17
Darkness: Adjusts the document brightness for the current copy job.
Original Type: Selects the document type for the current copy job.
Reduce/Enlarge: Makes a copy smaller or larger than the original.
4
5
Resolution: Adjusts the document resolution for the current fax job.
Redial/Pause: In Standby mode, redials the last number, or in Edit
mode, inserts a pause into a fax number.
USB Print: Allows you to directly print files stored on a USB Memory
device when it is inserted into the USB memory port on the front of
your machine.
6
Fax: Activates Fax mode.
18
7
8
Copy: Activates Copy mode.
19
20
Number keypad: dials a number or enters alphanumeric characters.
Scan/Email: Activates Scan mode.
On Hook Dial: Engages the telephone line.
Stop/Clear: Stops an operation at any time. In Standby mode,
clears/cancels the copy options, such as the darkness, the
document type setting, the copy size, and the number of copies.
9
Display: Shows the current status and prompts during an operation.
21
10
11
12
Menu: Enters Menu mode and scrolls through the available menus.
22
23
Color Start: Starts a job in Color mode.
Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values.
Black Start: Starts a job in Black and White mode.
OK: Confirms the selection on the screen.
1.3
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel overview(CLX-3160N)
1
2
Copy: Activates Copy mode.
10
11
Original Type: Selects the document type for the current copy job.
Scan/Email: Activates Scan mode.
Reduce/Enlarge: Makes a copy smaller or larger than the original.
Display: Shows the current status and prompts during an
operation.
3
4
5
6
12
13
14
15
Address Book: Allows you to search for stored email addresses.
USB Print: Allows you to directly print files stored on a USB Memory
device when it is inserted into the USB memory port on the front of
your machine.
Menu: Enters Menu mode and scrolls through the available menus.
Scroll buttons: Scroll through the options available in the selected
menu, and increase or decrease values.
Number keypad: Dials a number or enters alphanumeric characters.
Stop/Clear: Stops an operation at any time. In Standby mode, clears/
cancels the copy options, such as the resolution, the document type
setting, the copy size, and the number of copies.
OK: Confirms the selection on the screen.
7
8
Back: Sends you back to the upper menu level.
16
17
Color Start: Starts a job in Color mode.
Black Start: Starts a job in Black and White mode.
Darkness: Adjusts the document brightness for the current copy
job.
9
Note
• Use the recessed area on the right of the control panel for storing clips to bind printouts
1.4
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Status LED
Finding more information
The Status LED on the control panel shows the status of your machine.
See the table below to know your machine’s status.
You can find information for setting up and using your machine from the
following resources, either printed or onscreen.
Quick Install
Status
Description
• The machine is off-line.
• The machine is in Power Save mode. When
data is received, or any button is pressed, it
switches to on-line automatically.
Guide
Provides information on setting up your
machine and, therefore, be sure to follow the
instructions in the guide to get the machine
ready.
Off
On
The machine is on-line and can be used.
Provides you with step-by-step instructions for
using your machine’s full features, and
contains information for maintaining your
machine, troubleshooting, and installing
• When the backlight slowly blinks, the machine
is receiving data from the computer.
• When the backlight fast blinks, the machine is
printing data.
Green
Blinking
Online User’s
Guide
accessories.
This user’s guide also contains the Software
Section providing you with information on how
to print documents with your machine on
various operating systems, and how to use the
supplied software utilities.
• The toner cartridge is totally exhausted.
Remove the old toner cartridge and install a
• A paper jam has occurred. To solve the
• The front cover is open. Close the front cover.
• There is no paper in the tray. Load paper in the
tray.
• The machine has stopped due to a major error.
details on the meaning of the error message.
Note
On
• You can access the user’s guides in
other languages from the Manual
folder on the Printer software CD.
Network Printer
User’s Guide
Red
Contained on the network utilities CD,
provides you with information on setting up
and connecting your machine to a network.
• A minor error occurs and the machine is waiting
an error to be cleared. Check the display
message. When the problem is cleared, the
machine resumes.
Blinking
• The toner cartridge is low. Order a new toner
cartridge. You can temporarily improve print
quality by redistributing the toner. See page
Printer Driver
Help
Provides you with help information on printer
driver properties and instructions for setting up
the properties for printing. To access a printer
driver help screen, click Help from the printer
properties dialog box.
If you have Internet access, you can get help,
support, printer drivers, manuals, and order
information from the Samsung website,
Website
1.5
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a location
Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.
Clearance space
• Front: 482.6 mm (enough space so that the paper tray can be
removed)
• Back: 100 mm (enough space for ventilation)
• Right: 100 mm (enough space for ventilation)
• Left: 100 mm (enough space for ventilation)
Caution
• When you move the printer, do not tilt or turn it upside down.
Or the inside of the printer may be contaminated by toner,
which can cause damage to the printer or bad printing quality.
1.6
<Introduction>
Download from Www.Somanuals.com. All Manuals Search And Download.
2System setup
This chapter gives you an overview of menus available on your machine
and step-by-step instructions for setting up the machine’s systems.
This chapter includes:
Menu overview
•
•
•
•
•
•
•
The control panel provides access to various menus to set up the
machine or use the machine’s functions. These menus can be accessed
by pressing Menu. Refer to the following diagram. Menus available in
Fax, Copy, or Scan mode vary.
Note
• Some menus may not appear in the display depending on
your country. If so, it is not applicable to your machine.
* Menus in the colored characters are available only with CLX-3160FN.
Fax Feature
Fax Setup
Sending
Copy Feature
Copy Setup
Darkness
Copy Collation
2-Up
4-Up
ID Copy
Poster Copy
Clone Copy
Erase Bkgd.
Change Default
Copies
Multi Send
Delay Send
Priority Send
Forward
Redial Times
Redial Term
Prefix Dial
ECM Mode
Send Report
Image TCR
Dial Mode
Reduce/Enlarge
Darkness
Original Type
Scan Feature
Secure Receive
Add Page
Cancel Job
USB Memory
Scan Size
Receiving
Original Type
Resolution
Scan Color
Scan Format
E-mail
Receive Mode
Ring to Answer
Stamp Rcv Name
Rcv Start Code
Auto Reduction
Discard Size
Scan Size
Original Type
Resolution
Scan Color
Junk Fax Setup
DRPD Mode
Change Default
Resolution
Darkness
Auto Report
Network
System Setup
(continued)
System Setup
Scan Setup
TCP/IP
Machine Setup
Machine ID
Change Default
USB Memory
Ethernet Speed
Clear Setting
Network Info
Paper Setup
Paper Size
Paper Type
Paper Source
Sound/Volume
Key Sound
Alarm Sound
Speaker
Machine Fax No.
E-mail
Date & Time
Clock Mode
Language
Default Mode
Power Save
Scan PWR Save
Timeout
NetScanTimeout
Altitude Adj.
Auto Continue
Import Setting
Export Setting
Ringer
Report
Maintenance
Remote Service
Supplies Life
Color
Serial Number
Clear Setting
2.1
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Press OK to save the time and date.
Changing the display language
When you enter a wrong number, Out of Range appears and the
machine does not proceed to the next step. If this happens, simply
reenter the correct number.
To change the language that appears on the control panel, follow these
steps:
Press Stop/Clear to return to Standby mode.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Changing the clock mode
2
3
4
Press OK when Machine Setup appears.
You can set your machine to display the current time using either a 12-
hour or 24-hour format.
Press the Scroll buttons until Language appears and press OK.
Press the Scroll buttons until the language you want appears and
press OK.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
5
Press Stop/Clear to return to Standby mode.
2
3
4
5
Press OK when Machine Setup appears.
Press the Scroll buttons until Clock Mode appears and press OK.
Press the Scroll buttons to select the other mode and press OK.
Press Stop/Clear to return to Standby mode.
Setting the date and time
The current date and time are shown on the display when your machine
is on and ready to work. For the CLX-3160FN, all of your faxes will have
the date and time printed on them.
Changing the default mode (CLX-3160FN only)
Note
• If power to the machine is cut off, you need to reset the correct
time and date once the power has been restored.
Your machine is preset to Fax mode. You can switch this default mode
between Fax mode and Copy mode.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
4
Press OK when Machine Setup appears.
2
3
Press OK when Machine Setup appears.
Press the Scroll buttons until Date & Time appears and press OK.
Enter the correct time and date using the number keypad.
Press the Scroll buttons until Default Mode appears and press
OK.
Month = 01 to 12
Day = 01 to 31
Year = requires four digits
Hour = 01 to 12 (12-hour mode)
00 to 23 (24-hour mode)
Minute = 00 to 59
4
5
Press the Scroll buttons until the default mode you want appears
and press OK.
Press Stop/Clear to return to Standby mode.
Note
• The date format may differ from country to country
You can also use the Scroll buttons to move the cursor under the
digit you want to correct and enter a new number.
5
To select AM or PM for 12-hour format, press the
or
button or
any number button.
When the cursor is not under the AM or PM indicator, pressing the
or button immediately moves the cursor to the indicator.
You can change the clock mode to 24-hour format (e.g. 01:00 PM
as 13:00). For details, see the next section.
2.2
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting sounds (CLX-3160FN only)
Entering characters using the number keypad
You can control the following sounds:
As you perform various tasks, you may need to enter names and
numbers. For example, when you set up your machine, you enter your
name or your company’s name, and the fax number. When you store fax
numbers or email addresses in memory, you may also enter the
corresponding names.
• Key Sound: Turns the key sound on or off. With this option set to On,
a tone sounds each time a key is pressed.
• Alarm Sound: Turns the alarm sound on or off. With this option set to
On, an alarm tone sounds when an error occurs or fax
communication ends.
Entering alphanumeric characters
• Speaker: Turns on or off the sounds from the telephone line through
the speaker, such as a dial tone or a fax tone. With this option set to
Comm. which means “Common,” the speaker is on until the remote
machine answers.
1
When you are prompted to enter a letter, locate the button labeled
with the character you want. Press the button until the correct letter
appears on the display.
You can adjust the volume level using On Hook Dial.
For example, to enter the letter O, press 6, labeled with MNO.
• Ringer: Adjusts the ringer volume. For the ringer volume, you can
select Off, Low, Mid, and High.
Each time you press 6, the display shows a different letter, M, N, O,
m, n, o and finally 6.
You can enter special characters, such as space, plus sign, and
etc. For details, see the below section.
Speaker, ringer, key sound, and alarm sound
1
2
3
4
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by
pressing the right Scroll button and then press the button labeled
with the letter you want. The cursor will move to the right and the
next letter will appear on the display.
Press the Scroll buttons until Sound/Volume appears and press
OK.
Press the Scroll buttons until the sound option you want appears
and press OK.
You can enter a space by pressing 1 twice.
Press the Scroll buttons until the desired status or volume for the
When you have finished entering letters, press OK.
sound you have selected appears and press OK.
Keypad letters and numbers
5
6
If necessary, repeat steps 3 through 5 to set other sounds.
Press Stop/Clear to return to Standby mode.
Key
Assigned numbers, letters, or characters
Space
1
2
3
4
5
6
7
8
9
0
1
Speaker volume
A
D
G
J
B
E
H
K
N
Q
U
X
-
C
F
I
a
d
g
j
b
e
h
c
f
2
1
2
3
Press On Hook Dial. A dial tone sounds from the speaker.
Press the Scroll buttons until you hear the volume you want.
Press Stop/Clear to save the change and return to Standby mode.
3
i
4
L
k
l
5
Note
M
P
T
O
m
n
o
6
r
• You can adjust the speaker volume only when the telephone
line is connected.
R
V
Y
,
S
p
q
s
7
t
u
v
/
8
W
Z
w
x
y
z
9
+
.
‘
*
#
&
@
0
2.3
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting numbers or names
Scan Power Save mode
If you make a mistake while entering a number or name, press the left
Scroll button to delete the last digit or character. Then enter the correct
number or character.
Scan Power Save mode allows you to save power by turning off the scan
lamp. The scan lamp under the scanner glass automatically turns off
when it is not in actual use to reduce power consumption and extend the
life of the lamp. The lamp automatically wakes up after some warm-up
time when you start scanning.
Inserting a pause
You can set the length of time for which the scan lamp waits after a scan
job is completed before it switches to the power save mode.
With some telephone systems, you must dial an access code (9, for
example) and listen for a second dial tone. In such cases, you must
insert a pause in the telephone number. You can insert a pause while you
are setting up speed buttons or speed dial numbers.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
To insert a pause, press Redial/Pause at the appropriate place while
entering the telephone number. A - appears on the display at the
corresponding location.
2
3
Press OK when Machine Setup appears.
Press the Scroll buttons until Scan PWR Save appears and press
OK.
4
5
Press the Scroll buttons until the time setting you want appears
and press OK.
Using the save modes
Power Save mode
Press Stop/Clear to return to Standby mode.
Power Save mode allows your machine to reduce power consumption
when it is not in actual use. You can turn this mode on and select a length
of time for which the machine waits after a job is printed before it
switches to a reduced power state.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
4
Press OK when Machine Setup appears.
Press the Scroll buttons until Power Save appears and press OK.
Press the Scroll buttons until the time setting you want appears
and press OK.
5
Press Stop/Clear to return to Standby mode.
2.4
<System setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Printer
Contents
3 Software overview
•
•
Printer driver: Use this driver to run
your machine from a Macintosh.
Scanner driver: TWAIN driver is
available for scanning documents
on your machine.
software CD
This chapter gives you an overview of the software that comes with your
machine. Further details about installing and using the software are
explained in the Software Section.
(continued)
Macintosh
This chapter includes:
•
•
Smart Panel: This program allows
you to monitor the machine’s status
and alerts you when an error occurs
during printing.
•
•
•
network
utilities CD
SyncThru™ Web Admin Service
Use this web-based program to
remotely manage, monitor, and
troubleshoot network printers.
:
Supplied software
Windows
You must install the printer and scanner software using the supplied CDs
after you have set up your machine and connected it to your computer.
•
•
Set IP: Use this program to set your
machine’s TCP/IP addresses.
Network Printer User’s Guide in
PDF
Each CD provides you with the following software:
CD
Printer
Contents
a. Allows you to edit a scanned image in many ways using a powerful image edi-
tor and to send the image by email. You can also open another image editor
program, like Adobe Photoshop, from SmarThru. For details, please refer to
the onscreen help supplied on the SmarThru program.
•
•
Printer driver: Use this driver to
take full advantage of your printer’s
features.
software CD
Scanner driver: TWAIN and
Windows Image Acquisition (WIA)
drivers are available for scanning
documents on your machine.
Smart Panel: This program allows
you to monitor the machine’s status
and alerts you when an error occurs
during printing.
Printer driver features
Your printer drivers support the following standard features:
• Paper orientation, size, source and media type selection
• Number of copies
•
•
•
Windows
a
In addition, you can use various special printing features. The following
table shows a general overview of features supported by your printer
drivers:
SmarThru : This is the
accompanying Windows-based
software for your multifunctional
machine.
Network Scan: This program allows
you to scan a document on your
machine and save it to a network-
connected computer.
Printer Driver
Feature
Windows
Macintosh
Linux
O
Print quality option
O
O
•
•
User’s Guide in PDF
Multiple pages per
sheet (N-up)
O
O
O (2, 4)
Printer driver: Use this driver to run
your machine from a Linux
computer and print documents.
SANE: Use this driver to scan
documents.
Smart Panel: This program allows
you to monitor the machine’s status
and alerts you when an error occurs
during printing.
Poster printing
Booklet Printing
Fit to page printing
Scale printing
O
O
O
O
X
X
O
O
X
X
X
X
•
•
Linux
Different source for
first page
O
O
X
Watermark
Overlay
O
O
X
X
X
X
3.1
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Linux
System requirements
Item
Requirements
• RedHat 8.0 ~ 9.0
Before you begin, ensure that your system meets the following
requirements:
• Fedora Core 1, 2, 3, 4
• Mandrake 9.2 ~ 10.1
• SuSE 8.2 ~ 9.2
Operating system
Windows
Item
Requirements
Recommended
CPU
Pentium IV 1 GHz or higher
256 MB or higher
Operating
system
Windows 98/Me/2000/XP
RAM
Free disk page
1 GB or higher
Pentium II
400 MHz or
higher
Windows 98/
Me/2000
Pentium III
933 MHz
• Linux Kernel 2.4 or higher
• Glibc 2.2 or higher
• CUPS
CPU
RAM
Software
Pentium III
933 MHz or
higher
Pentium IV
1 GHz
Windows XP
• SANE(for MFP device only)
Windows 98/
Me/2000
Notes
64 MB or more
128 MB or more
300 MB or more
1 GB or more
128 MB
256 MB
1 GB
• It’s necessary to claim swap partition of 300 MB or larger for
working with large scanned images.
Windows XP
• The Linux scanner driver supports the optical resolution at
maximum.
Windows 98/
Me/2000
Free disk
space
Macintosh
Item
Windows XP
5.0 or higher
5 GB
Internet
Explorer
Requirements
Macintosh 10.3 ~ 10.4
Operating system
RAM
Note
128 MB
• For Windows 2000/XP, users who have an administrator right
can install the software.
Free disk space
Connection
200 MB
USB interface, Network interface
3.2
<Software overview>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported operating systems
4 Network setup
The following table shows the network environments supported by the
machine:
This chapter gives you step-by-step instructions for setting up your
machine for network connections.
This chapter includes:
Item
Requirements
•
•
•
•
•
•
Network interface
• Ethernet 10/100 Base-TX
• Windows 98/Me/2000/XP
• Various Linux OS
• Macintosh OS 10.3 ~ 10.4
Network operating
system
• TCP/IP on Windows
• IPP, SNMP
Network protocols
Dynamicaddressing
server
• DHCP, BOOTP
Introduction
• TCP/IP: Transmission Control Protocol/Internet Protocol
• IPP: Internet Printing Protocol
• SNMP: Simple Network Management Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Once you have connected your machine to a network with an RJ-45
Ethernet cable, you can share the machine with other network users.
You need to set up the network protocols on the machine to use it as your
network printer. Protocols can be set up by the following two methods:
Via network administration programs
Configuring TCP/IP
You can configure your machine’s print server settings and manage the
machine via the following programs that came with your machine:
Your machine can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your machine can be assigned a TCP/
IP address, depending on your network.
• SyncThru™ Web Admin Service: A web-based printer
management solution for network administrators. SyncThru™ Web
Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot
network printers from any site with corporate intranet access.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
• SyncThru™ Web Service: A web server embedded to your network
print server, which allows you to:
• Dynamic addressing via BOOTP/DHCP: A TCP/IP address is
assigned automatically by the server.
- Configure the network parameters necessary for the machine to
connect to various network environments.
Note
• Before configuring TCP/IP, you need to set the network
protocol to TCP/IP.
- Customize printer, copy, and fax settings.
• SetIP: A utility program allowing you to select a network interface and
manually configure the addresses for use with the TCP/IP protocol.
Static addressing
For further details, refer to the user’s guide on the network utilities CD
that came with your machine.
To enter a TCP/IP address from your machine’s control panel, take the
following steps:
Via the control panel
1
Press Menu until Network appears on the bottom line of the
display and press OK
.
You can set up the following basic network parameters through the
machine’s control panel:
2
3
4
Press OK when TCP/IP appears.
• Configure TCP/IP
Press the Scroll buttons until Static appears and press OK.
Press OK when IP Address appears.
• Configure EtherTalk
4.1
<Network setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Enter a byte between 0 and 255 using the number keypad and
press the Scroll buttons to move between bytes.
Restoring the network configuration
Repeat this to complete the address from the 1st byte to the 4th
byte.
You can return the network configuration to its default settings.
1
Press Menu until Network appears on the bottom line of the
6
7
When you have finished, press OK.
display and press OK.
Repeat steps 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
2
Press the Scroll buttons until Clear Setting appears and press
OK.
8
9
Press the Scroll buttons until Static appears and press OK.
3
4
Press OK when Yes appears to restore the network configuration.
Press the Scroll buttons until Primary DNS appears and press
OK.
Power the machine off and back on.
10 Enter each byte of the address and press OK.
Printing a network configuration page
11 Press the Scroll buttons until Secondary DNS appears and press
OK.
The Network Configuration page shows how the network interface card
on your machine is configured.
12 Enter each byte of the address and press OK.
1
2
3
Press Menu until Network appears on the bottom line of the
display and press OK.
13 Press Stop/Clear to return to Standby mode.
Press the Scroll buttons until Network Info. appears and press
OK.
Dynamic addressing (BOOTP/DHCP)
To have a TCP/IP address assigned automatically by the server, take the
following steps:
Press OK when Yes appears.
The Network Configuration page prints out.
1
Press Menu until Network appears on the bottom line of the
display.
2
3
Press OK when TCP/IP appears.
Press the Scroll buttons until DHCP or BOOTP appears and press
OK
.
4
Press Stop/Clear to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
2
3
4
Press Menu until Network appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Ethernet Speed appears and press
OK.
Press the Scroll buttons until the speed you want appears and
press OK.
Press Stop/Clear to return to Standby mode.
4.2
<Network setup>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Place the original face down on the scanner glass and align it with
the registration guide at the top left corner of the glass.
5 Loading originals and print
media
This chapter introduces you to how to load originals and print media into
your machine.
This chapter includes:
•
•
•
•
Loading originals
You can use the scanner glass or ADF to load an original for copying,
scanning, and sending a fax.
On the scanner glass
3
Close the scanner lid.
Make sure that no originals are in the ADF. If an original is detected in
the ADF, the machine gives it priority over the original on the scanner
glass. To get the best scan quality, especially for colored or gray-scaled
images, use the scanner glass.
Notes
• Leaving the scanner lid open while copying may affect copy
quality and toner consumption.
• Dust on the scanner glass may cause black spots on the
printout. Always keep it clean.
1
Lift and open the scanner lid.
• If you are copying a page from a book or magazine, lift the
scanner lid until its hinges are caught by the stopper and then
close the lid. If the book or magazine is thicker than 30 mm,
start copying with the lid open.
In the ADF
2
Using the ADF, you can load up to 50 sheets of paper (75 g/m , 20 lb)
for one job.
When you use the ADF:
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following types of paper:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely
dry before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents
having other unusual characteristics.
5.1
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
To load an original into the ADF:
Selecting print media
1
Load the original face up into the ADF. Make sure that the bottom of
the original stack matches the paper size marked on the document
input tray.
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the
guidelines for use with your machine. Print media that does not meet the
guidelines outlined in this user’s guide may cause the following
problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content,
are important factors that affect the machine’s performance and the
output quality. When you choose print materials, consider the following:
• Desired outcome: The print media you choose should be appropriate
for your project.
• Size: You can use any size media that fits easily within the paper
adjusters of the paper tray.
• Weight: Your machine supports print media weights as follows:
2
Adjust the document width guides to the paper size.
2
- 16 to 43 lb bond (60 to 163 g/m ) for the tray 1 and manual feeder
2
- 16 to 24 lb bond (60 to 90 g/m ) for the optional tray 2
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
Notes
• Some print media may meet all of the guidelines in this section
and still not produce satisfactory results. This may be the
result of improper handling, unacceptable temperature and
humidity levels, or other variables over which Samsung has no
control.
• Before purchasing large quantities of print media, ensure that
it meets the requirements specified in this user’s guide.
Caution
• Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not
covered by Samsung’s warranty or service agreements.
Note
• Dust on the ADF glass may cause black lines on the printout.
Always keep it clean.
5.2
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported print media types and sizes
a
Type
Size
Dimensions
Weight
Capacity
2
Letter
Legal
Folio
Oficio
A4
215.9 x 279 mm (8.5 x 11 inches)
215.9 x 355.6 mm (8.5 x 14 inches)
215.9 x 330.2 mm (8.5 x 13 inches)
215 x 343 mm (8.5 x 13.5 inches)
210 x 297 mm (8.27 x 11.69 inches)
182 x 257 mm (7.17 x 10.12 inches)
184.2 x 266.7 mm (7.25 x 10.5 inches)
148.5 x 210 mm (5.85 x 8.27 inches)
105 x 148.5 mm (4.13 x 5.85 inches)
176 x 250 mm(6.93 x 9.84 inches)
98.4 x 190.5 mm (3.88 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
98 x 225 mm (3.86 x 8.86 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.38 x 9.02 inches)
114 x 162 mm (4.49 x 6.38 inches)
92 x 165 mm (3.62 x 6.5 inches)
• 60 to 90 g/m (16 to 24 lb
• 1 sheet for the manual
feeder
• 150 sheets of 75 g/m
bond) for the optional tray
2
• 60 to 105 g/m (16 to 28 lb
bond) for the tray 1 and
manual feeder
2
2
(20 lb bond) paper for the
tray 1
2
• 250 sheets of 75 g/m
Plain paper
(20 lb bond) paper for the
optional tray 2
JIS B5
Executive
A5
A6
ISO/Envelope B5
Envelope Monarch
Envelope COM-10
Envelope No.9
Envelope DL
Envelope C5
Envelope C6
Envelope size 6 3/4
1 sheet for the manual
feeder or tray 1
2
Envelope
75 to 90 g/m (20 to 24 lb)
1 sheet for the manual
feeder or tray 1
b
2
Transparency
Letter, A4
Refer to the Plain paper section
Refer to the Plain paper section
138 to 146 g/m (37 to 39 lb)
Letter, Legal, Folio,
Oficio, A4, JIS B5,
Executive, A5, A6
1 sheet for the manual
feeder or tray 1
2
Labels
120 to 150 g/m (32 to 40 lb)
Letter, Legal, Folio,
Oficio, A4, JIS B5,
Executive, A5, A6
1 sheet for the manual
feeder or tray 1
2
Card stock
Refer to the Plain paper section
105 to 163 g/m (28 to 43 lb)
2
Minimum size (custom)
Maximum size (custom)
76 x 127 mm (3 x 5 inches)
60 to 163 g/m
1 sheet for the manual
feeder or tray 1
(16 to 43 lb bond)
216 x 356 mm (8.5 x 14 inches)
a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
b. Recommended media: Transparency for a Color Laser Printers produced by HP, Xerox and 3M.
It is not recommended to use paperbacked transparencies such as Xerox 3R91334, which can cause a jam or be scratched.
5.3
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Guidelines for special print media
Media sizes supported in each mode
Media type
Guidelines
Mode
Size
Source
Letter, A4, Legal,
Oficio, Folio,
Executive, JIS B5, A5,
A6
• Successful printing on envelopes depends upon
the quality of the envelopes. When selecting
envelopes, consider the following factors:
• tray 1
• optional tray 2
• manual feeder
Copy mode
- Weight: The weight of the envelope paper
should not exceed 90 g/m2 (24 lb) or jamming
may occur.
• tray 1
• optional tray 2
• manual feeder
All sizes supported by
the machine
Print mode
- Construction: Prior to printing, envelopes
should lie flat with less than 6 mm
(0.25 inches) curl, and should not contain air.
• tray 1
• optional tray 2
a
Fax mode
Letter, A4, Legal
- Condition: Envelopes should not be wrinkled,
nicked, or otherwise damaged.
a. CLX-3160FN only
- Temperature: You should use envelopes that
are compatible with the heat and pressure of
the machine during operation.
• Use only well-constructed envelopes with sharp
and well creased folds.
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials,
keep these guidelines in mind:
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps,
windows, coated lining, self-adhesive seals, or
other synthetic materials.
• Always use print media that conform with the specifications listed on
page 5.3.
• Attempting to print on damp, curled, wrinkled, or torn paper can cause
paper jams and poor print quality.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope
extends all the way to the corner of the
envelope.
• For the best print quality, use only high quality copier grade paper
specifically recommended for use in laser printers.
Envelopes
• Avoid using the following media types:
- Paper with embossed lettering, perforations, or a texture that is too
smooth or too rough
Acceptable
- Erasable bond paper
- Multi-paged paper
- Synthetic paper and thermally reactive paper
- Carbonless paper and Tracing paper.
Unacceptable
Use of these types of paper could result in paper jams, chemical smells,
and damage to your machine.
• Envelopes with a peel-off adhesive strip or with
more than one flap that folds over to seal must
use adhesives compatible with the machine’s
fusing temperature of 180° C (356° F) for
0.1 second. The extra flaps and strips might
cause wrinkling, creasing, or jams, and may
even damage the fuser.
• For the best print quality, position margins no
closer than 15 mm (0.6 inches) from the edges
of the envelope.
• Store print media in its ream wrapper until you are ready to use it.
Place cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture or other conditions that can
cause it to wrinkle or curl.
o
o
• Store unused print media at temperatures between 15 C and 30 C
o
o
(59 F to 86 F). The relative humidity should be between 10% and
70%.
• Store unused print media in a moisture-proof wrap, such as a plastic
container or bag, to prevent dust and moisture from contaminating
your paper.
• Avoid printing over the area where the
envelope’s seams meet.
• Load special media types one sheet at a time through the manual
feeder to avoid paper jams.
• To prevent print media, such as transparencies and label sheets, from
sticking together, remove them as they print out.
5.4
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
Media type
Guidelines
Media type
Guidelines
• To avoid damaging the machine, use only
transparencies designed for use in laser
printers.
• Transparencies used in the machine must be
able to withstand 180° C (356° F), the machine’s
fusing temperature.
• Do not print on media smaller than 76 mm
(3 inches) wide or 127 mm (5 inches) long.
• In the software application, set margins at least
6.4 mm (0.25 inches) away from the edges of
the material.
Card stock or
custom-sized
materials
• Letterhead must be printed with heat-resistant
ink that will not melt, vaporize, or release
hazardous emissions when subjected to the
machine’s fusing temperature of 180° C (356° F)
for 0.1 second.
• Letterhead ink must be non-flammable and
should not adversely affect printer rollers.
• Forms and letterhead should be sealed in a
moisture-proof wrapping to prevent changes
during storage.
• Place them on a flat surface after removing
them from the machine.
• Do not leave them in the paper tray for long
periods of time. Dust and dirt may accumulate
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,
handle them carefully.
• To avoid fading, do not expose printed
transparencies to prolonged sunlight.
• Ensure that transparencies are not wrinkled,
curled, or have any torn edges.
Transparencies
Preprinted
paper
• Before you load preprinted paper, such as forms
and letterhead, verify that the ink on the paper is
dry. During the fusing process, wet ink can come
off preprinted paper, reducing print quality.
Caution
Recommended media: Transparency for a
Color Laser Printers produced by HP, Xerox
and 3M.
It is not recommended to use paperbacked
transparencies such as Xerox 3R91334,
which can cause a jam or be scratched.
• To avoid damaging the machine, use only labels
designed for use in laser printers.
• When selecting labels, consider the following
factors:
- Adhesives: The adhesive material should be
stable at 180° C (356° F), the machine’s
fusing temperature.
- Arrangement: Only use labels with no
exposed backing between them. Labels can
peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with
no more than 13 mm (5 inches) of curl in any
direction.
Labels
- Condition: Do not use labels with wrinkles,
bubbles, or other indications of separation.
• Make sure that there is no exposed adhesive
material between labels. Exposed areas can
cause labels to peel off during printing, which
can cause paper jams. Exposed adhesive can
also cause damage to machine components.
• Do not run a sheet of labels through the
machine more than once. The adhesive backing
is designed for only a single pass through the
machine.
• Do not use labels that are separating from the
backing sheet or are wrinkled, bubbled, or
otherwise damaged.
5.5
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Flex the paper sheets back and forth to separate pages and then
fan them while holding one edge. Tap the edges of the stack on a
flat surface to even it up.
Loading paper
In the tray 1
Load the print media you use for the majority of your print jobs in the tray
1. The tray 1 can hold a maximum of 150 sheets of 20 lb plain paper.
You can purchase an optional tray 2 and attach it below the tray 1 to load
an additional 250 sheets of paper. For order information for an optional
optional tray 2, see page 12.1.
6
Load paper with the print side up.
Loading paper in the tray 1
1
2
Pull the tray out of the machine.
Open the paper cover.
Make sure not to overfill the tray and that all four corners are flat in
the tray and under the brackets, as shown below. Overfilling the
tray may cause a paper jam.
3
Adjust the size of tray until it sound click.
4
Enlarge the tray by adjusting the paper width guide.
7
Squeeze the paper length guide and slide in it until it lightly touches
the end of the paper stack.
5.6
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Close the paper cover.
Changing the size of the paper in the tray 1
To load longer sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
To change the tray 1 size to other size, you must adjust the paper length
guide properly.
1
Pull the tray 1 out of the machine. Open the paper cover and
remove paper from the tray 1 if necessary.
2
Pressing and unlatching the guide lock in the top of the tray, pull the
tray out manually.
9
Slide the tray 1 back into the machine.
3
Load paper into the tray.
You can load letterhead with the design side face up. The top edge
of the sheet with the logo should be go into the machine first.
After loading paper, set the paper type and size for the tray 1. See
printing.
Notes
• Due to insufficient paper in the tray, the paper length guide
can be pushed to inside, load enough paper.
4
Slide the paper length guide until it lightly touches the end of the
paper stack. Squeeze the paper width guide and slide it to the edge
of the paper stack without causing it to bend.
• If you experience problems with paper feed, place one sheet
at a time in the manual feeder.
• You can load previously printed paper. The printed side
should be facing down with an uncurled edge into the
machine. If you experience problems with paper feed, turn
the paper around. Note that print quality is not guaranteed.
5.7
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
For paper smaller than Letter-sized, return the paper guides to their
original positions and adjust the paper length guide and paper width
guide.
In the manual feeder
The manual feeder can hold special sizes and types of print material,
such as transparencies, postcards, note cards, labels, and envelopes. It
is useful for single page printing on letterhead or colored paper.
To load paper in the manual feeder:
Caution
• When you do the printing job from the manual feeder, clear
the paper in the tray 1 away.
1
Load the paper with the side to be printed on facing up.
Notes
• Do not push the paper width guides far enough to cause the
material to warp.
• If you do not correctly adjust the paper width guides, it may
cause a paper jams.
5
Close the paper cover.
Depending on the media type you are using, keep the following
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left
side.
• Transparencies: Print side up and the top with the adhesive strip
entering the machine first.
6
Slide the tray 1 back into the machine.
• Labels: Print side up and top short edge entering the machine
first.
• Preprinted paper: Design side up with the top edge toward the
machine.
• Card stock: Print side up and the short edge entering the machine
first.
• Previously printed paper: Previously printed side down with an
uncurled edge toward the machine.
5.8
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Squeeze the manual feeder paper width guides and adjust them to
the width of the paper. Do not force too much, or the paper will be
bent, which will result in a paper jam or skew.
Setting the paper size and type
After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy
and Fax modes. For PC-printing, you need to select the paper size and
type in the application program you use on your PC.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
4
Press the Scroll buttons until Paper Setup appears and press OK.
Press OK when Paper Size appears.
Press the Scroll buttons until the paper tray you want appears and
press OK.
5
Press the Scroll buttons until the paper size you are using appears
and press OK.
6
7
8
Press Back to return to the upper level.
3
After loading paper, set the paper type and size for the manual
Section for PC-printing.
Press the Scroll buttons until Paper Type appears and press OK.
Press the Scroll buttons until the paper type you are using appears
and press OK.
Note
• The settings made from the printer driver override the
settings on the control panel.
9
Press Stop/Clear to return to Standby mode.
Caution
• If you want to print several pages with the manual feeder,
wait the machine complete the printing one page, then
place a paper on the manual feeder. Otherwise it may
cause the paper jam.
Tips on using the manual feeder
• Load only one size of print media at a time in the manual feeder.
When you print out many pieces of paper at once, tray 1 use is
recommended.
• To prevent paper jams, do not add paper when there is still paper in
the manual feeder. This also applies to other types of print media.
• Print media should be loaded face up with the top edge going into the
manual feeder first and be placed in the center of the tray.
jams and print quality problems.
• Flatten any curl on postcards, envelopes, and labels before loading
them into the manual feeder.
5.9
<Loading originals and print media>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press Color Start to begin color copying.
6 Copying
Or, press Black Start to begin black and white copying.
Note
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
• You can cancel the copy job during an operation. Press Stop/
Clear, and the copying will stop.
•
•
•
•
•
•
Changing the settings for each copy
Your machine provides default settings for copying so that you can
quickly and easily make a copy. However, if you want to change the
options for each copy, use the copy function buttons on the control panel.
Note
• If you press Stop/Clear while setting the copy options, all of
the options you have set for the current copy job will be
canceled and returned to their default status. Or, they will
automatically return to their default status after the machine
completes the copy in progress.
Selecting the paper tray
After loading the print media for copy output, you must select the paper
tray you will use for copy jobs.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Darkness
If you have an original containing faint markings and dark images, you
can adjust the brightness to make a copy that is easier to read.
2
3
Press the Scroll buttons until Paper Setup appears and press OK.
Press the Scroll buttons until Paper Source appears and press
To adjust the darkness of copies, press Darkness. Each time you press
the button, the following modes are available:
OK
.
• Normal: Works well with standard typed or printed originals.
• Light: Works well with dark print.
4
5
Press OK when Copy Tray appears.
Press the Scroll buttons until the paper tray you want appears and
press OK.
• Dark: Works well with light print or faint pencil markings.
6
Press Stop/Clear to return to Standby mode.
Original Type
The original type setting is used to improve the copy quality by selecting
the document type for the current copy job.
Copying
To select the document type, press Original Type. Each time you press
the button, the following modes are available:
1
2
Press Copy.
• Text: Use for originals containing mostly text.
Ready to Copy appears on the top line of the display.
• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when the originals are photographs.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3
4
Enter the number of copies using the number keypad, if necessary.
If you want to customize the copy settings including copy size,
darkness, and original type, by using the control panel buttons.
See page 6.1.
If necessary, you can use special copy features, such as poster
6.1
<Copying>
Download from Www.Somanuals.com. All Manuals Search And Download.
Reduced or enlarged copy
Using special copy features
By using the Reduce/Enlarge button, you can reduce or enlarge the size
of a copied image from 25% to 400% when you copy original documents
from the scanner glass, or from 25% to 100% from the ADF.
You can use the following copy features:
Collation
To select from the predefined copy sizes:
You can set the machine to sort the copy job. For
example, if you make 2 copies of a 3 page original,
one complete 3 page document will print followed by a
second complete document.
1
2
Press Reduce/Enlarge.
Press Reduce/Enlarge or the Scroll buttons until the size setting
you want appears and press OK.
1
2
Press Copy.
To scale the copy by directly entering the scale rate:
Load originals face up into the ADF.
1
2
Press Reduce/Enlarge.
For details about loading an original, see page
5.1.
Press Reduce/Enlarge or the Scroll buttons until Custom appears
and press OK.
3
4
Enter the number of copies using the number
keypad.
3
Enter the scale rate and press OK to save the selection.
Note
Press Menu until Copy Feature appears on the
bottom line of the display and press OK.
• When you make a reduced copy, black lines may appear at
the bottom of your copy.
5
6
Press OK when Copy Collation appears.
Press the Scroll buttons to select the color mode
you want.
Changing the default copy settings
There are two types of mode as following:
The copy options, including darkness, original type, copy size, and
number of copies, can be set to those most frequently used. When you
copy a document, the default settings are used unless they have been
changed by using the corresponding buttons on the control panel.
•Yes-Color: Color copy
•Yes-Mono: Black and White copy
7
Press OK to begin copying.
1
2
Press Copy.
One complete document will print followed by the
second complete document.
Press Menu until Copy Setup appears on the bottom line of the
display and press OK.
3
4
Press OK when Change Default appears.
Press the Scroll buttons until the setup option you want appears
and press OK.
5
Press the Scroll buttons until the setting you want appears and
press OK.
6
7
Repeat steps 4 through 5, as needed.
Press Stop/Clear to return to Standby mode.
Note
• While you are setting copy options, pressing Stop/Clear
cancels the changed settings and restores the defaults.
6.2
<Copying>
Download from Www.Somanuals.com. All Manuals Search And Download.
2-up or 4-up copying
ID card copying
Your machine can print 2 or 4 original images reduced
Your machine can print 2-sided originals on one sheet
to fit onto one sheet of paper.
of A4-, Letter-, Legal-, Folio-, Oficio-, Executive-, B5-,
A5-, or A6-sized paper.
2 or 4-up copying is available only when you load
originals into the ADF.
When you copy using this feature, the machine prints
one side of the original on the upper half of the paper
and the other side on the lower half without reducing
the size of the original. This feature is helpful for
copying a small-sized item, such as a name card.
1
2
Press Copy.
2-up copying
Load originals face up in the ADF.
1
2
For details about loading an original, see page
5.1.
This copy feature is available only when you place
originals on the scanner glass.
3
4
3
4
5
Press Menu until Copy Feature appears on the
bottom line of the display and press OK.
1
2
Press Copy.
Place a single original face down on the scanner
glass.
Press the Scroll buttons until 2-Up or 4-Up
appears and press OK.
4-up copying
For details about loading an original, see page
5.1.
Press the Scroll buttons to select the color mode
you want.
There are two types of mode as following:
3
4
Press Menu until Copy Feature appears on the
bottom line of the display and press OK.
•Yes-Color: Color copy
•Yes-Mono: Black and White copy
Press the Scroll buttons until ID Copy appears
and press OK.
6
Press OK to begin copying.
Place Front Side and Press[Start] appears on
the display.
Note
• You cannot adjust the copy size using the
Reduce/Enlarge button for making a 2- or
4-up copy.
5
6
Press OK, Color Start or Black Start.
Your machine begins scanning the front side and
shows Place Back Side and Press[Start].
Open the scanner lid and turn the original over.
Note
• If you press Stop/Clear or if no buttons
are pressed for approximately 30
seconds, the machine cancels the
copy job and returns to Standby mode.
7
Press Color Start to begin color copying.
Or, press Black Start to begin black and white
copying.
Note
• If the original is larger than the printable
area, some portions may not be printed.
6.3
<Copying>
Download from Www.Somanuals.com. All Manuals Search And Download.
Poster copying
Clone copying
Your machine can print an image onto 9 sheets of
Your machine can print multiple image copies from the
paper (3x3). You can paste the printed pages together
to make one poster-sized document.
original document on a single page. The number of
images is automatically determined by the original
image and paper size.
This copy feature is available only when you place
originals on the scanner glass.
This copy feature is available only when you place
originals on the scanner glass.
1
2
Press Copy.
1
2
Press Copy.
Place a single original face down on the scanner
glass.
Place a single original face down on the scanner
glass.
For details about loading an original, see page
5.1.
For details about loading an original, see page
5.1.
3
4
5
Press Menu until Copy Feature appears on the
bottom line of the display and press OK.
3
4
5
Press Menu until Copy Feature appears on the
bottom line of the display and press OK.
Press the Scroll buttons until Poster Copy
appears and press OK.
Press the Scroll buttons until Clone Copy
appears and press OK.
Press the Scroll buttons to select the color mode
you want.
Press the Scroll buttons to select the color mode
you want.
There are two types of mode as following:
There are two types of mode as following:
•Yes-Color: Color copy
•Yes-Color: Color copy
•Yes-Mono: Black and White copy
•Yes-Mono: Black and White copy
6
Press OK to begin copying.
6
Press OK to begin copying.
Note
Note
• You cannot adjust the copy size using the
Reduce/Enlarge button when making a
poster.
• You cannot adjust the copy size using the
Reduce/Enlarge button while making a
clone copy.
Your original is divided into 9
portions. Each portion is scanned
and printed one by one in the
following order:
6.4
<Copying>
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing background images
You can set the machine to print an image without its background. This
copy feature removes the background color and can be helpful when
copying an original containing color in the background, such as a
newspaper or a catalog. This copy feature is only for mono copying.
1
2
Press Copy.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
3
Press Menu until Copy Feature appears on the bottom line of the
display and press OK.
4
5
6
7
8
Press the Scroll buttons until Erase Bkgd. appears and press OK.
Press the Scroll buttons to select On and press OK.
Press Stop/Clear to return to Standby mode.
Enter the number of copies using the number keypad.
Press Black Start to begin mono copying.
Setting copy timeout
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
4
Press OK when Machine Setup appears.
Press the Scroll buttons until Timeout appears and press OK.
Press the Scroll buttons until the time setting you want appears.
Selecting Off means that the machine does not restore the default
settings until you press Black Start or Color Start to begin copying,
or Stop/Clear to cancel.
5
6
Press OK to save your selection.
Press Stop/Clear to return to Standby mode.
6.5
<Copying>
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Basic printing
This chapter explains common printing tasks.
Printing a document
Your machine allows you to print from various Windows, Macintosh, or
Linux applications. The exact steps for printing a document may vary
depending on the application you use.
For details about printing, see the Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the
printer group in Windows, delete the job as follows:
1
2
Click the Windows Start menu.
For Windows 98/2000/Me, select Settings and then Printers.
For Windows XP, select Printers and Faxes.
3
4
Double-click the Samsung CLX-3160 Series icon.
From the Document menu, select Cancel Printing (Windows 98/
Me) or Cancel (Windows 2000/XP).
Note
• You can also access this window by simply double-clicking the
printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing Stop/Clear on the
control panel.
7.1
<Basic printing>
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning to an application using a local
connection
8 Scanning
Scanning with your machine lets you turn pictures and text into digital
files that can be stored on your computer. Then you can fax or email the
files, upload them to your website, or use them to create projects that
you can print.
1
2
Make sure that your machine and computer are turned on and
properly connected to each other.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
This chapter includes:
•
•
•
•
•
•
For details about loading an original, see page 5.1.
3
Press Scan/Email.
Ready to Scan appears on the top line of the display.
4
5
Press the Scroll buttons until Scan to Appl. appears on the bottom
line of the display and press OK.
Press the Scroll buttons until the application you want to use
appears and press OK.
Note
• The maximum resolution that can be achieved depends upon
various factors, including computer speed, available disk
space, memory, the size of the image being scanned, and bit
depth settings. Thus, depending on your system and what
you are scanning, you may not be able to scan at certain
resolutions, especially using enhanced resolution.
• Microsoft Paint: Sends the scanned image to Microsoft Paint.
• Email: Sends the scanned image to your default email program
on your computer. A new message windows opens with the image
attached.
• My Documents: Saves the scanned image in the default folder,
My Documents, on your computer.
• SmarThru: Sends the scanned image to SmarThru™, installed
with the printer driver.
Scanning basics
• OCR: Sends the scanned image to the OCR program for text
recognition.
Your machine offers the following ways to scan an image using a local
connection:
• Via one of the preset imaging applications. Scanning an image
launches the selected application, enabling you to control the
scanning process. See the next section.
Note
• You can add more TWAIN-compliant software for
scanning, such as Adobe Photoshop Deluxe, or Adobe
Photoshop, from the Printer Settings Utility. See the
Software Section.
• Via the SmarThru™ program supplied with your machine. Scanning
an image launches SmarThru™ and enables you to control the
scanning process.
6
On the selected application, adjust the scan settings and begin
scanning.
• Via the Windows Images Acquisition (WIA) driver. See the Software
Section.
For details, please refer to the application user’s guide.
• To a portable USB memory device, if inserted into the USB memory
port on your machine. See page 11.2.
Also, you can send scanned images to several destinations using a
network connection:
• To your networked computer via the Network Scan program. You can
scan an image from the machine, if network-connected, to the
computer where the Network Scan program is running.
8.1
<Scanning>
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering authorized users
Scanning using a network connection
To send an email, you need to register authorized users using
SyncThru™ Web Service. You can add up to 50 users.
If you have connected your machine to a network and set up network
parameters correctly, you can scan and send images over the network.
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
Preparing for network scanning
2
3
4
Click Machine Settings and User Authentication.
Before using your machine’s network scanning features, you need to
add the machine to the Network Scan program for scanning to a network
client.
Click ADD.
Select the index number where the corresponding entry will be
stored, from 1 to 50.
Adding the machine to the Network Scan program
5
6
Enter your name, user ID, password, and e-mail address.
First, install the Network Scan program. See the Software Section.
You need to enter the registered user ID and password in the
machine when you start scanning to email from the control panel.
To scan images from your machine to your computer through the
network, you need to register the machine as an authorized network
scanner in the Network Scan program.
Click Apply.
1
In Windows, select Start
Printer Utilities Network Scan
Programs
Samsung Network
Network Scan.
Setting up an e-mail account
To scan and send an image as an email attachment, you need to set up
network parameters using SyncThru™ Web Service.
The Samsung Network Scan Manager window opens.
Click the Add Device button or double-click the Add Device icon.
Click Next.
2
3
4
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
Select Browse for a scanner. (recommended), or select Connect
to this scanner. and enter the IP address of your machine.
2
3
4
5
Click Machine Settings and E-mail Setup.
Select IP Address or Host Name.
5
6
Click Next.
Enter the IP address in dotted decimal notation or as a host name.
A list of the scanners on your network appears.
Enter the server port number, from 1 to 65535.
The default port number is 25.
Select your machine from the list and enter a name, user ID, and
PIN (Personal Identification Number) for the machine.
6
Put a check mark in SMTP Requires Authentication to require
authentication.
Notes
• For the scanner name, the model name of your machine
is automatically entered, but can be changed.
7
8
Enter the SMTP server login name and password.
• You can enter an ID of up to 8 characters. The first
character must be a letter.
Click Apply.
• The PIN must be 4 digits.
7
8
Click Next.
Click Finish.
Your machine is added to the Network Scan program and you can
now scan images through the network.
Note
• You can change the scanner properties of your machine and
the scan settings from the Samsung Network Scan
Manager window. Click Properties and set the options in
each tab.
8.2
<Scanning>
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press OK when Machine Setup appears.
Scanning to a network client
Press the Scroll buttons until NetScanTimeout appears and press
OK.
Network Scan allows you to remotely scan an original from your network-
connected machine to your computer in JPEG, TIFF, or PDF file format.
4
5
Enter the desired timeout value and press OK.
Scanning
The change will be broadcast over the network and will apply to all
clients connected to the network.
1
Make sure that your machine and the computer are connected to a
network and Network Scan is running on the computer.
Press Stop/Clear to return to Standby mode.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Scanning to Email
For details about loading an original, see page 5.1.
You can scan and send an image as an email attachment. You first need
to set up your email account in SyncThru™ Web Service. See page
8.2.
3
4
Press Scan/Email.
Press the Scroll buttons until Network Scan appears on the
bottom line of the display and press OK.
Before scanning, you can set the scan options for your scan job. See
page 8.4.
5
6
7
Select the Scroll buttons until the ID you have set in the Samsung
Network Scan Manager window and press OK.
1
2
Make sure that your machine is connected to a network.
Enter the PIN you have set in the Samsung Network Scan
Manager window and press OK.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
If the scan destination is your computer folders, press the Scroll
buttons until My Documents appears on the bottom line of the
display and press OK.
3
4
Press Scan/Email.
Press the Scroll buttons until Scan to Email appears on the
bottom line of the display and press OK.
Note
If the scan destination is your computer application, press
the Scroll buttons until the application you want appears
and press Color Start or Black Start. Scanning is started.
5
6
7
Enter the recipient’s email address and press OK.
If you have set up Address Book, you can use a speed button or a
speed email or group email number to retrieve an address from
8
Press the Scroll buttons until the scan setting option you want
appears and press OK. Or, press Color Start or Black Start to
immediately start scanning using the default settings.
To enter additional addresses, press OK when Yes appears and
repeat step 5.
• Resolution: Sets the image resolution.
• Scan Color: Sets the color mode.
To continue to the next step, press the Scroll buttons to select No
and press OK.
• Scan Format: Sets the file format in which the image is to be
saved. When you select TIFF or PDF, you can select to scan
multiple pages.
If the display asks if you want to send the email to your account,
press the Scroll buttons to select Yes or No and press OK.
9
Press the Scroll buttons until the desired status appears and press
OK.
Note
This prompt does not appear if you have activated the
Send To Self option in the email account setup.
10 press Color Start or Black Start to start scanning. Your machine
begins scanning the original to the computer where the program is
running.
8
9
Enter an email subject and press OK.
Press the Scroll buttons until the file format you want appears and
press OK or Start.
Setting network scan timeout
If the Network Scan program on your computer does not send a refresh
request and does not scan a job within a specified timeout period, your
machine cancels the scan job. You can change this timeout setting as
needed.
The machine begins scanning and then sends the email.
10 If the machine asks if you want to log off your account, press the
Scroll buttons to select Yes or No and press OK.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
11 Press Stop/Clear to return to Standby mode.
8.3
<Scanning>
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Press Stop/Clear to return to Standby mode.
Changing the settings for each scan job
Your machine provides you with the following setting options to allow you
to customize your scan jobs.
Setting up Address Book
• Scan Size: Sets the image size.
You can set up Address Book with the email addresses you use
frequently via SyncThru™ Web Service and then easily and quickly
enter email addresses by entering the location numbers assigned to
them in Address Book.
• Original Type: Sets the original document’s type.
• Resolution: Sets the image resolution.
• Scan Color: Sets the color mode.
• Scan Format: Sets the file format in which the image is to be saved.
If you select TIFF or PDF, you can select to scan multiple pages.
Depending on the selected scan type, this option may not appear.
Registering speed email numbers
1
Enter your machine’s IP address as the URL in a browser and click
Go to access the web site of your machine.
To customize the settings before starting a scan job:
2
3
4
Click Machine Settings and E-mail Setup.
1
2
Press Scan/Email.
Click Local Address Book and ADD.
Press Menu until Scan Feature appears on the bottom line of the
display and press OK.
Select a location number and enter the user name and e-mail
address you want.
3
4
5
Press the Scroll buttons until the scan type you want appears and
press OK.
5
Click Apply.
Press the Scroll buttons until the scan setting option you want
appears and press OK.
Note
You can also click Import and obtain your address book
from your computer.
Press the Scroll buttons until the desired status appears and press
OK.
Configuring group email numbers
6
7
Repeat steps 4 and 5 to set other setting options.
1
Enter your machine’s IP address as the URL in a browser and click
When you have finished, press Stop/Clear to return to Standby
mode.
Go to access the web site of your machine.
2
3
4
5
6
Click Machine Settings and E-mail Setup.
Click Group Address Book and ADD.
Changing the default scan settings
Select a group number and enter the group name you want.
Select speed email numbers that will be included in the group.
Click Apply.
To avoid having to customize the scan settings for each job, you can set
up default scan settings for each scan type.
1
2
Press Scan/Email.
Press Menu until Scan Setup appears on the bottom line of the
display and press OK.
Using Address Book entries
To retrieve an email address, use the following ways:
3
4
Press OK when Change Default appears.
Press the Scroll buttons until the scan type you want appears and
press OK.
Speed email numbers
When you are prompted to enter a destination address while sending an
email, enter the speed email number at which you stored the address
you want.
5
6
Press the Scroll buttons until the scan setting option you want
appears and press OK.
• For a one-digit speed email location, press and hold the
corresponding digit button from the number keypad.
Press the Scroll buttons until the desired status appears and press
OK.
• For a two- or three-digit speed email location, press the first digit
button(s) and then hold down the last digit button.
7
8
Repeat steps 5 and 6 to change other settings.
To change the default settings for other scan types, press Back
and repeat from step 4.
8.4
<Scanning>
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are an CLX-3160FN user, you can also press the speed buttons at
which you stored the address you want.
You can also search through memory for an entry by pressing Address
Group email numbers
To use a group email entry, you need to search for and select it from
memory.
When you are prompted to enter a destination address while sending an
Searching Address Book for an entry
There are two ways to search for an address in memory. You can either
scan from A to Z sequentially or search by entering the first letters of the
name associated with the address.
Searching sequentially through memory
1
2
If necessary, press Scan/Email.
Press Address Book until Search & Send appears on the bottom
line of the display and press OK.
3
Press the Scroll buttons until the number category you want
appears and press OK.
4
5
Press OK when All appears.
Press the Scroll buttons until the name and address you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
Searching with a particular first letter
1
2
If necessary, press Scan/Email.
Press Address Book until Search & Send appears on the bottom
line of the display and press OK.
3
Press the Scroll buttons until the number category you want
appears and press OK.
4
5
6
Press the Scroll buttons until ID appears and press OK.
Enter the first few letters of the name you want and press OK.
Press the Scroll buttons until the name you want appears and
press OK.
Printing Address Book
You can check your Address Book settings by printing a list.
1
Press Address Book until Print appears on the bottom line of the
display.
2
Press OK. A list showing your speed button settings, and the
speed/group email entries print out.
8.5
<Scanning>
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax
9 Faxing
(CLX-3160FN only)
The fax feature is available only on the CLX-3160FN. This chapter gives
you information about using your machine as a fax machine.
Setting the fax header
This chapter includes:
In some countries, you are required by law to indicate your fax number
on any fax you send. The Machine ID, containing your telephone number
and name or company name, will be printed at the top of each page sent
from your machine.
•
•
•
•
•
•
•
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
4
Press OK when Machine Setup appears.
Press OK when Machine ID appears.
Enter your name or the company name using the number keypad.
You can enter alphanumeric characters using the number keypad,
and include special symbols by pressing the 0 button.
•
•
•
•
•
•
•
•
•
For details on how to enter alphanumeric characters, see page 2.3.
5
6
Press OK to save the ID.
Press the Scroll buttons until Machine Fax No. appears and press
OK.
7
8
Enter your fax number using the number keypad and press OK.
Press Stop/Clear to return to Standby mode.
Adjusting the document settings
•
•
•
•
Before starting a fax, change the following settings according to your
original’s status to get the best quality.
Resolution
The default document settings produce good results when using typical
text-based originals. However, if you send originals that are of poor
quality, or contain photographs, you can adjust the resolution to produce
a higher quality Fax.
1
2
Press Resolution.
Press Resolution or the Scroll buttons until the option you want
appears.
3
Press OK to save your selection.
9.1
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended resolution settings for different original document types
are described in the table below:
Sending a fax automatically
1
2
Press Fax.
Mode
Recommended for:
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Standard
Originals with normal sized characters.
Originals containing small characters or thin lines or
originals printed using a dot-matrix printer.
Fine
For details about loading an original, see page 5.1.
Ready to Fax appears on the top line of the display.
Originals containing extremely fine detail. Super
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
3
4
Adjust the resolution and the darkness to suit your fax needs.
Enter the receiving fax machine’s number.
Notes
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
• For memory transmission, Super Fine
mode is not available. The resolution
setting is automatically changed to Fine.
Super Fine
5
6
Press Color Start or Black Start.
• When your machine is set to Super Fine
resolution and the fax machine with which
you are communicating does not support
Super Fine resolution, the machine
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
transmits using the highest resolution
mode supported by the other fax machine.
7
When you have finished, select No at the Another Page? prompt.
After the number is dialed, the machine begins sending the fax
when the receiving fax machine answers.
Photo Fax
Note
Originals containing shades of gray or photographs.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.
• The resolution setting is applied to the current fax job. To
change the default setting, see page 10.2.
Darkness
Sending a fax manually
You can select the default contrast mode to fax your originals lighter or
darker.
1
2
Press Fax.
1
2
Press Fax.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Press Menu, and then OK when Fax Feature appears on the
bottom line of the display.
For details about loading an original, see page 5.1.
3
4
Press OK when Darkness appears.
3
Adjust the resolution and the darkness to suit your fax needs. See
Press the Scroll buttons until the option you want appears and
press OK.
4
5
Press On Hook Dial. You hear a dial tone.
5
Press Stop/Clear to return to Standby mode.
Enter the receiving fax machine’s number.
Note
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
• The darkness setting is applied to the current fax job. To
change the default setting, see page 10.2.
6
Press Color Start or Black Start when you hear a high-pitched fax
signal from the remote fax machine.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.
9.2
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving a fax
Confirming a transmission
When the last page of your original has been sent successfully, the
machine beeps and returns to Standby mode.
Selecting the paper tray
When something goes wrong while sending your fax, an error message
appears on the display. For a list of error messages and their meanings,
clear the message and try to send the fax again.
After loading the print media for fax output, you have to select the paper
tray you will use for the fax reception.
1
Press Menu until System Setup appears on the bottom line of the
display and press OK
You can set your machine to print a confirmation report automatically
each time sending a fax is completed. For further details, see page 10.1.
.
2
3
Press the Scroll buttons until Paper Setup appears and press OK.
Press the Scroll buttons until Paper Source appears and press
Automatic redialing
OK
Press the Scroll buttons until Fax Tray appears and press OK
Press the Scroll buttons until the paper tray you want appears and
.
4
5
.
When the number you have dialed is busy or there is no answer when
you send a fax, the machine automatically redials the number every
three minutes, up to seven times according to the factory default
settings.
press OK
.
6
Press Stop/Clear to return to Standby mode.
When the display shows Retry Redial?, press OK to redial the number
without waiting. To cancel the automatic redialing, press Stop/Clear.
To change the time interval between redials and the number of redial
Changing receiving modes
1
2
Press Fax.
Redialing the last number
Press Menu until Fax Setup appears on the bottom line of the
display and press OK
.
To redial the number you called last:
3
4
5
Press the Scroll buttons until Receiving appears and press OK
.
1
2
Press Redial/Pause.
Press OK when Receive Mode appears.
When an original is loaded in the ADF, the machine automatically
begins to send.
Press the Scroll buttons until the fax reception mode you want
appears.
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK. When you have
finished, select No at the Another Page? prompt.
• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by pressing On Hook Dial and
then Color Start or Black Start. You can also pick up the handset
of the extension phone and then press the remote receive code.
See page 9.4.
• In Ans/Fax mode, an answering machine attached to your
machine answers an incoming call, and the caller can leave a
message on the answering machine. If the fax machine senses a
fax tone on the line, the machine automatically switches to Fax
mode to receive the fax. See page 9.4.
• In DRPD mode, you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. Distinctive Ring is a telephone
company service which enables an user to use a single telephone
line to answer several different telephone numbers. For further
6
Press OK to save your selection.
9.3
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press Stop/Clear to return to Standby mode.
Receiving automatically in Ans/Fax mode
Notes
To use this mode, you must attach an answering machine to the EXT
socket on the back of your machine.
• When the memory is full, the printer can no longer receive
any incoming fax. Secure free memory to resume by
removing data stored in the memory.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax tone on the
line, it automatically starts to receive the fax.
• To use the Ans/Fax mode, attach an answering machine to
the EXT socket on the back of your machine.
• If you do not want other people to view your received
documents, you can use secure receiving mode. In this
mode, all of the received faxes are stored in memory. For
Notes
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine
is connected to EXT socket, your machine automatically goes
into Fax mode after a predefined number of rings.
• If your answering machine has a user-selectable ring counter,
set the machine to answer incoming calls within 1 ring.
Receiving automatically in Fax mode
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off
the answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
Your machine is preset to Fax mode at the factory. When you receive a
fax, the machine answers the call on a specified number of rings and
automatically receives the fax.
Receiving faxes using DRPD mode
Receiving manually in Tel mode
Distinctive Ring is a telephone company service which enables an user
to use a single telephone line to answer several different telephone
numbers. The particular number someone uses to call you is identified
by different ringing patterns, which consist of various combinations of
long and short ringing sounds. This feature is often used by answering
services who answer telephones for many different clients and need to
know which number someone is calling in on to properly answer the
phone.
You can receive a fax call by pressing On Hook Dial and then pressing
Black Start or Color Start when you hear a fax tone from the remote
machine.
The machine begins receiving a fax and returns to Standby mode when
the reception is completed.
Using the Distinctive Ring Pattern Detection (DRPD) feature, your fax
machine can learn the ring pattern you designate to be answered by the
fax machine. Unless you change it, this ringing pattern will continue to be
recognized and answered as a fax call, and all other ringing patterns will
be forwarded to the extension telephone or answering machine plugged
into the EXT socket. You can easily suspend or change DRPD at any
time.
Receiving manually using an extension
telephone
This features works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can
receive a fax from someone you are talking to on the extension
telephone without going to the fax machine.
Before using the DRPD option, Distinctive Ring service must be installed
on your telephone line by the telephone company. To set up DRPD, you
will need another telephone line at your location, or someone available
to dial your fax number from outside.
When you receive a call on the extension phone and hear fax tones,
press the keys
the fax.
9
on the extension phone. The machine receives
Press the buttons slowly in sequence. If you still hear the fax tone from
the remote machine, try pressing once again.
To set up the DRPD mode:
9
1
2
Press Fax.
9
is the remote receive code preset at the factory. The first and the
last asterisks are fixed, but you can change the middle number to
Press Menu until Fax Setup appears on the bottom line of the
display and press OK
Press the Scroll buttons until Receiving appears and press OK
Press the Scroll buttons until DRPD Mode appears and press OK
Waiting Ring appears on the display.
.
3
4
.
.
9.4
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Call your fax number from another telephone. It is not necessary to
place the call from a fax machine.
Printing received faxes
1
Access the Secure Receive menu by following steps 1 through 3 in
When your machine begins to ring, do not answer the call. The
machine requires several rings to learn the pattern.
2
3
Press the Scroll buttons until Print appears and press OK
Enter the four-digit password and press OK
The machine prints all of the faxes stored in memory.
.
When the machine completes learning, the display shows
Completed DRPD Setup.
.
If the DRPD setup fails, Error DRPD Ring appears. Press OK
when DRPD Mode appears and start over from step 4.
7
Press Stop/Clear to return to Standby mode.
Deactivating secure receiving mode
When the DRPD feature is set up, the DRPD option is available for the
receiving mode setting. To receive faxes in DRPD mode, you need to set
the menu to DRPD.
1
Access the Secure Receive menu by following steps 1 through 3 in
2
3
Press the Scroll buttons until Off appears and press OK
.
Notes
Enter the four-digit password and press OK
.
• DRPD must be set up again if you re-assign your fax number,
or connect the machine to another telephone line.
The mode is deactivated and the machine prints all faxes stored in
memory.
• After DRPD has been set up, call your fax number again to
verify that the machine answers with a fax tone. Then have a
call placed to a different number assigned to that same line to
be sure the call is forwarded to the extension telephone or
answering machine plugged into the EXT socket.
4
Press Stop/Clear to return to Standby mode.
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while
you are making copies or printing. If you receive a fax while you are
copying or printing, your machine stores incoming faxes in its memory.
Then, as soon as you finish copying or printing, the machine
automatically prints the fax.
Receiving in secure receiving mode
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory. When the mode is
deactivated, any stored faxes are printed.
Also, your machine receives faxes and stores them in its memory when
there is no paper in the tray or no toner in the installed toner cartridge.
Activating secure receiving mode
1
2
Press Fax.
Press Menu and then press OK when Fax Feature appears on the
bottom line of the display.
3
Press the Scroll buttons until Secure Receive appears and press
OK
.
4
5
Press the Scroll buttons until On appears and press OK
.
Enter a four-digit password you want to use and press OK
.
Note
• You can activate secure receiving mode without setting a
password, but cannot protect your faxes.
6
7
Re-enter the password to confirm it and press OK.
Press Stop/Clear to return to Standby mode.
When a fax is received in secure receiving mode, your machine stores it
in memory and shows Secure Receive to let you know that there is a fax
received.
9.5
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Other ways to fax
Sending a delayed fax
You can set your machine to send a fax at a later time when you will not
be present. You can not send a color fax using this feature.
Sending a fax to multiple destinations
1
2
Press Fax.
You can use the Multiple Send feature, which allows you to send a fax to
multiple locations. Originals are automatically stored in memory and sent
to a remote station. After transmission, the originals are automatically
erased from memory. You can not send a color fax using this feature.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
1
2
Press Fax.
3
4
Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
For details about loading an original, see page 5.1.
5
6
Press the Scroll buttons until Delay Send appears and press OK.
3
4
Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
Enter the number of the receiving machine using the number
keypad.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK
.
You can use speed buttons, speed dial numbers. You can enter
Group Dial Number using Address Book Button.For details, see
page 10.3.
5
6
Press the Scroll buttons until Multi Send appears and press OK
.
Enter the number of the first receiving fax machine and press OK
.
7
8
Press OK to confirm the number. The display asks you to enter
another fax number to which to send the document.
You can use speed buttons, speed dial numbers. You can enter
Group Dial Number using Address Book Button. For details, see
To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
7
8
Enter the second fax number and press OK.
Note
The display asks you to enter another fax number to send the
document.
• Once you entered a group dial number, you cannot enter
another group dial numbers anymore.
To enter more fax numbers, press OK when Yes appears and
repeat steps 6 and 7. You can add up to 10 destinations.
9
When you have finished entering fax numbers, press the Scroll
buttons to select No at the Another No.? prompt and press OK.
Note
10 Enter the job name you want and press OK.
• Once you entered a group dial number, you cannot enter
another group dial numbers anymore.
For details on how to enter alphanumeric characters, see page 2.3.
If you do not want to assign a name, skip this step.
9
When you have finished entering fax numbers, press the Scroll
buttons to select No at the Another No.? prompt and press OK.
11 Enter the time using the number keypad and press OK, or Black
Start.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
Note
• If you set a time earlier than the current time, the fax will
be sent at that time on the following day.
10 If an original is placed on the scanner glass, select Yes to add
another pages. Load another original and press OK.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
When you have finished, select No at the Another Page? prompt.
The machine begins sending the fax to the numbers you entered in
the order in which you entered them.
12 If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine returns to Standby mode. The display reminds you
that you are in Standby mode and that a delayed fax is set.
9.6
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Press OK to confirm the number.
Adding pages to a delayed fax
Enter the job name you want and press OK.
You can add pages to the delayed transmissions previously reserved in
your machine’s memory.
The original is scanned into memory before transmission. The
display shows memory capacity and the number of pages being
stored in memory.
1
2
Load the originals to be added and adjust document settings.
Press Menu until Fax Feature appears on the bottom line of the
9
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press OK.
display and press OK.
3
4
Press OK when Add Page appears.
When you have finished, select No at the Another Page? prompt.
Press the Scroll buttons until the fax job you want appears and
press OK.
The machine shows the number being dialed and begins sending
the fax.
The machine scans the original into memory and shows the total
number of pages and the number of the added pages.
Forwarding faxes
Canceling a delayed fax
You can forward your incoming and outgoing faxes to another fax
machine or email address.
1
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
Forwarding sent faxes to another fax machine
2
3
Press the Scroll buttons until Cancel Job appears and press OK.
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the fax numbers you entered.
Press the Scroll buttons until the fax job you want appears and
press OK.
1
2
Press Fax.
4
Press OK when Yes appears.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
The selected fax is deleted from memory.
3
4
5
Press the Scroll buttons until Forward appears and press OK.
Sending a priority fax
Press OK when Fax appears.
Using the Priority Fax feature, a high priority fax can be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a Multiple Send operation
between stations (i.e., when the transmission to station A ends, before
transmission to station B begins) or between redial attempts.
Press the Scroll buttons until Send Forward appears and press
OK.
6
7
Press the Scroll buttons to select On and press OK.
Enter the number of the fax machine to which faxes are to be sent
and press OK.
1
2
Press Fax.
8
Press Stop/Clear to return to Standby mode.
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Subsequent sent faxes will be forwarded to the specified fax
machine.
For details about loading an original, see page 5.1.
3
4
5
6
Adjust the document resolution and darkness to suit your fax
needs. See page 9.1.
Forwarding sent faxes to email address
You can set the machine to send copies of all outgoing faxes to a
specified destination, in addition to the email address you entered.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
1
2
Press Fax.
Press the Scroll buttons until Priority Send appears and press
OK.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
Enter the number of the receiving machine.
3
4
Press the Scroll buttons until Forward appears and press OK.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details, see page 10.3.
Press the Scroll buttons until E-mail appears and press OK.
9.7
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press the Scroll buttons until Send Forward appears and press
OK.
4
5
Press the Scroll buttons until E-mail appears and press OK.
Press the Scroll buttons until Rcv. Forward appears and press
6
7
8
Press the Scroll buttons to select On and press OK.
OK.
Enter your email address and press OK.
6
Press the Scroll buttons until Forward appears and press OK.
To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
Enter the email address to which faxes are to be sent and press
OK.
7
8
Enter your email address and press OK.
9
Press Stop/Clear to return to Standby mode.
Subsequent sent faxes will be forwarded to the specified email
address.
Enter the email address to which faxes are to be sent and press
OK.
9
Press Stop/Clear to return to Standby mode.
Forwarding received faxes to another fax
machine
Subsequent sent faxes will be forwarded to the specified email
address.
You can set your machine to forward incoming faxes to another fax
number during a specified time period. When a fax arrives at your
machine, it is stored in memory. Then, the machine dials the fax number
that you have specified and sends the fax.
1
2
Press Fax.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3
4
5
Press the Scroll buttons until Forward appears and press OK.
Press OK when Fax appears.
Press the Scroll buttons until Rcv. Forward appears and press
OK.
6
7
Press the Scroll buttons until Forward appears and press OK.
To set the machine to print out a fax when fax forwarding has been
completed, select Forward&Print.
Enter the number of the fax machine to which faxes are to be sent
and press OK.
8
9
Enter the starting time and press OK.
Enter the ending time and press OK.
10 Press Stop/Clear to return to Standby mode.
Subsequent received faxes will be forwarded to the specified fax
machine.
Forwarding received faxes to email address
You can set your machine to forward incoming faxes to the email
address you entered.
1
2
Press Fax.
Press Menu until Fax Feature appears on the bottom line of the
display and press OK.
3
Press the Scroll buttons until Forward appears and press OK.
9.8
<Faxing (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
10 Fax setup
(CLX-3160FN only)
This mode helps with poor line quality and makes
sure any faxes you send are sent smoothly to any
other ECM-equipped fax machine. Sending a fax
using ECM may take more time.
This chapter gives you information on setting up your machine for
receiving and sending faxes.
a
ECM Mode
This chapter includes:
You can set your machine to print a confirmation
report showing whether a transmission was
successful, how many pages were sent, and
more. The available options are On, Off, and On-
Error, which prints only when a transmission is
not successful.
•
•
•
•
Send Report
You can prevent the actual faxed material from
being included in the confirmation report for
privacy or security protection.
b
Image TCR
Changing the fax setup options
Your machine provides you with various user-selectable options for
setting up the fax system. You can change the default settings for your
preferences and needs.
This setting may not be available depending on
your country. If you cannot reach this option, your
machine does not support this feature.
You can set the dial mode for your machine to
either tone dialling or pulse dialling. If you have a
public telephone system or a private branch
exchnage(PBX) system, you may need to select
Pulse. Contact your local telephone company if
you are not sure which dial mode to use.
To change the fax setup options:
1
2
Press Fax.
Dial Mode
Press Menu until Fax Setup appears on the bottom line of the
display and press OK.
If you select Pulse, some phone system features
might not be available. It can also take longer to
dial a fax or phone number.
3
4
5
Press the Scroll buttons to select Sending or Receiving and press
OK.
Press the Scroll buttons until the menu item you want appears and
press OK.
a. Error Correction Mode
b. Transmission Confirmation Report
Press the Scroll buttons until the desired status appears or enter
the value for the option you have selected, and press OK.
Receiving options
6
7
If necessary, repeat steps 4 through 5.
Option
Description
Press Stop/Clear to return to Standby mode.
You can select the default fax receiving mode.
For details on receiving faxes in each mode, see
page 9.3.
Receive Mode
Ring to Answer
Sending options
You can specify the number of times the machine
rings before answering an incoming call.
Option
Description
You can specify the number of redial attempts. If
Redial Times
Redial Term
This option allows the machine to automatically
print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
you enter , the machine will not redial.
0
Stamp Rcv
Name
Your machine can automatically redial a remote
fax machine if it was busy. You can set an interval
between attempts.
This code allows you to initiate fax reception from
an extension phone plugged into the EXT socket
on the back of the machine. If you pick up the
extension phone and hear fax tones, enter the
You can set a prefix of up to five digits. This
number dials before any automatic dial number is
started. It is useful for accessing a PABX
exchange.
Rcv Start Code
Prefix Dial
code. It is preset to
9
at the factory.
10.1
<Fax setup (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Changing the default document settings
When receiving a fax containing pages as long as
or longer than the paper loaded in the paper tray,
the machine can reduce the size of the original to
fit the size of the paper loaded in the machine.
Turn on this feature if you want to automatically
reduce an incoming page.
The fax options, including resolution and darkness, can be set to the
most frequently used modes. When you send a fax, the default settings
are used if they are not changed by using the corresponding button and
menu.
Auto
Reduction
1
2
Press Fax.
With this feature set to Off, the machine cannot
reduce the original to fit onto one page. The
original will be divided and printed in actual size
on two or more pages.
Press Menu until Fax Setup appears on the bottom line of the
display and press OK.
3
Press the Scroll buttons until Change Default appears and press
OK.
When receiving a fax containing pages as long as
or longer than the paper in your machine, you can
set the machine to discard a specific length from
the end of the received fax. The machine will print
the received fax on one or more sheets of paper,
minus the data that would have been on the
specified discard segment.
4
5
Press OK when Resolution appears.
Press the Scroll buttons until the resolution you want appears and
press OK.
Discard Size
6
7
Press the Scroll buttons until Darkness appears and press OK.
When the received fax contains pages larger than
the paper in your machine, and Auto Reduction
has been turned on, the machine will reduce the
fax to fit on the existing paper, and nothing will be
discarded.
Press the Scroll buttons until the darkness you want appears and
press OK.
8
Press Stop/Clear to return to Standby mode.
This setting may not be available depending on
your country. Using this feature, the system will
not accept faxes sent from remote stations whose
numbers are stored in the memory as junk fax
numbers. This feature is useful for blocking any
unwanted faxes.
Printing sent fax report automatically
You can set the machine to print a report with detailed information about
the previous 50 communication operations, including time and dates.
1
2
Press Fax.
When you turn on this feature, you can access
the following options to set junk fax numbers.
Junk Fax Setup
Press Menu until Fax Setup appears on the bottom line of the
display and press OK.
• Add: allows you to set up to 10 fax numbers.
• Delete: allows you to delete the desired junk
fax number.
• Delete All: allows you to delete all junk fax
numbers.
3
4
5
Press the Scroll buttons until Auto Report appears and press OK.
Press the Scroll buttons until On appears and press OK.
Press Stop/Clear to return to Standby mode.
This mode enables a user to use a single
telephone line to answer several different
telephone numbers. In this menu, you can set the
machine to recognize which ring patterns to
answer. For details about this feature, see page
9.4.
a
DRPD Mode
a. Distinctive Ring Pattern Detection
10.2
<Fax setup (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Using speed buttons
Setting up Address Book
When you are prompted to enter a fax number while sending a fax:
You can set up Address Book with the fax numbers you use most
frequently. Your machine provides you with the following features for
setting up Address Book:
• To retrieve a number from speed buttons 1 to 15, press the
corresponding speed button and press OK.
• To retrieve a number from speed buttons 16 to 30, press Shift and
then the corresponding speed button, and press OK.
• Speed buttons
• Speed/Group dial numbers
Speed dial numbers
Note
• Before beginning to store fax numbers, make sure that your
machine is in Fax mode.
You can store up to 240 frequently-used fax numbers in speed dial
numbers.
Registering a speed dial number
Speed buttons
1
2
Press Fax.
The 15 speed buttons on the control panel lets you store frequently-used
fax numbers. You will be able to enter a fax number with the touch of a
button. By utilizing the Shift button, you can store up to 30 numbers on
the speed buttons.
Press Address Book until New & Edit appears on the bottom line
of the display and press OK.
3
4
Press OK when Speed Dial appears.
There are two ways to assign numbers to speed buttons. Examine the
procedures below and use the appropriate way which you prefer:
Enter a speed dial number between 0 and 239 and press OK.
If an entry is already stored in the number you choose, the display
shows the name to allow you to change it. To start over with
another speed dial number, press Back.
Registering after pressing a speed button
1
2
3
4
Press Fax.
Press one of the speed buttons.
Press OK when Yes appears.
5
Enter the name you want and press OK.
For details on how to enter alphanumeric characters, see page 2.3.
6
7
Enter the fax number you want and press OK.
Enter the name you want and press OK.
For details on how to enter alphanumeric characters, see page 2.3.
Press Stop/Clear to return to Standby mode.
5
Enter the fax number you want to store and press OK.
Editing speed dial numbers
Registering after entering a number first
1
Press Address Book until New & Edit appears on the bottom line
of the display and press OK.
1
2
3
4
Press Fax.
2
3
4
5
6
Press OK when Speed Dial appears.
Enter the fax number you want to store.
Press one of the speed buttons.
Press OK when Yes appears.
Enter the speed dial number you want to edit and press OK.
Change the name and press OK.
Change the fax number and press OK.
Note
Press Stop/Clear to return to Standby mode.
• If you press a speed button already assigned, the display
asks if you want to overwrite. Press OK to confirm Yes
and continue. To start over with another speed button,
select No.
Using speed dial numbers
When you are prompted to enter a destination number while sending a
fax, enter the speed dial number at which you stored the number you
want.
5
6
Enter the name you want and press OK.
For details on how to enter alphanumeric characters, see page 2.3.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad.
Press OK to confirm the number.
• For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button.
10.3
<Fax setup (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also search through memory for an entry by pressing Address
8
Press Stop/Clear to return to Standby mode.
Using group dial numbers
Group dial numbers
To use a group dial entry, you need to search for and select it from
memory.
If you frequently send the same document to several destinations, you
can group these destinations and set them under a group dial number.
You can then use a group dial number to send a document to all of the
destinations within the group. You can set up to 200 (0 through 199)
group dial numbers using the destination’s existing speed dial numbers.
When you are prompted to enter a fax number while sending a fax, press
Address Book. See below.
Searching Address Book for an entry
Registering a group dial number
There are two ways to search for a number in memory. You can either
scan from A to Z sequentially, or you can search by entering the first
letters of the name associated with the number.
1
2
Press Fax.
Press Address Book until New & Edit appears on the bottom line
Searching sequentially through the memory
of the display and press OK.
1
2
If necessary, press Fax.
3
4
5
6
7
8
Press the Scroll buttons until Group Dial appears and press OK.
Enter a group dial number between 0 and 199 and press OK.
Enter a speed dial number and press OK.
Press Address Book until Search & Dial appears on the bottom
line of the display and press OK.
3
Press the Scroll buttons until the number category you want
appears and press OK.
Press OK when speed dial information appears correctly.
Press OK when Yes appears.
4
5
Press OK when All appears.
Repeat steps 5 and 6 to include other speed dial numbers into the
group.
Press the Scroll buttons until the name and number you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
9
When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press OK.
Searching with a particular first letter
10 Press Stop/Clear to return to Standby mode.
1
2
If necessary, press Fax.
Editing a group dial number
Press Address Book until Search & Dial appears on the bottom
line of the display and press OK.
You can delete a specific entry from a group or add a new number to the
selected group.
3
Press the Scroll buttons until the number category you want
appears and press OK
.
1
Press Address Book until New & Edit appears on the bottom line
of the display and press OK.
4
5
6
Press the Scroll buttons until ID appears and press OK.
2
3
4
Press the Scroll buttons until Group Dial appears and press OK.
Enter the first few letters of the name you want and press OK.
Enter the group dial number you want to edit and press OK.
Press the Scroll buttons until the name you want appears and
press OK.
Enter the speed dial number you want to add or delete and press
OK.
If you entered a new speed dial number, Add? appears.
If you enter a speed dial number stored in the group, Delete?
appears.
5
6
Press OK to add or delete the number.
Press OK when Yes appears to add or delete more numbers and
repeat steps 4 and 5.
7
When you have finished, press the Scroll buttons to select No at
the Another No.? prompt and press OK.
10.4
<Fax setup (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a Address Book entry
You can delete entries in Address Book one by one.
1
2
3
Press Address Book until Delete appears on the bottom line of the
display and press OK.
Press the Scroll buttons until the number category you want
appears and press OK.
Press the Scroll buttons until the searching method you want
appears and press OK.
Select Search All to search for an entry by scanning through all
entries in Address Book.
Select Search ID to search for an entry by the first few letters of the
name.
4
Press the Scroll buttons until the name you want appears and
press OK.
Or, enter the first letters and press OK. Press the Scroll buttons
until the name you want appears and press OK.
5
6
7
Press OK.
Press OK when Yes appears to confirm the deletion.
Press Stop/Clear to return to Standby mode.
Printing Address Book
You can check your Address Book settings by printing a list.
1
Press Address Book until Print appears on the bottom line of the
display.
2
Press OK. A list showing your speed button settings, and speed
dial and group dial entries prints out.
10.5
<Fax setup (CLX-3160FN only)>
Download from Www.Somanuals.com. All Manuals Search And Download.
Plugging in a USB memory device
11 Using USB flash memory
The USB memory port on the front of your machine is designed for USB
V1.1 and USB V2.0 memory devices. Your machine supports USB
memory devices with FAT16/FAT32 and sector size 512Byte.
Check your USB memory devices’ file system from your dealer.
This chapter explains how to use a USB memory device with your
machine.
This chapter includes:
•
•
•
•
•
•
•
You must use only an authorized USB memory device with an A plug
type connector.
Backing up data (CLX-3160FN only)
Use only a metal/shielded
USB memory device.
Note
• There are two USB plug types.
About USB memory
USB memory devices are available with a variety of memory capacities
to give you more room for storing documents, presentations,
downloaded music and videos, high resolution photographs, or whatever
other files you want to store or move.
Insert a USB memory device into the USB memory port on the front of
your machine.
You can do the following on your machine using a USB memory device:
• Scan documents and save them on a USB memory device.
• Print data stored on a USB memory device.
• Back up Address Book entries and the system settings of your
machine.
• Restore backup files to the machine’s memory.
• Format the USB memory device.
• Check the available memory space.
Cautions
• Do not remove the USB memory device while the machine is
in operation, or writing to or reading from USB memory. This
may damage your machine.
• If your USB memory device has certain features, such as
security settings and password settings, your machine may
not automatically detect it. For details about these features,
see the device’s User’s Guide.
11.1
<Using USB flash memory>
Download from Www.Somanuals.com. All Manuals Search And Download.
• Scan Format: Sets the file format in which the image is to be
saved. When you select TIFF or PDF, you can select to scan
multiple pages. If you select JPEG in this option, you can not
select Mono in Scan Color.
Scanning to a USB memory device
You can scan a document and save the scanned image onto a USB
memory device. There are two ways of doing this: you can scan to the
device using the default settings, or you can customize your own scan
settings.
5
Press the Scroll buttons until the desired status appears and press
OK.
6
7
Repeat steps 4 and 5 to set other setting options.
Scanning
When you have finished, press Stop/Clear to return to Standby
mode.
1
Insert a USB memory device into the USB memory port on your
machine.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
Printing from a USB memory device
For details about loading an original, see page 5.1.
3
4
Press Scan/Email.
You can directly print files stored on a USB memory device. You can print
TIFF, BMP, JPEG.
Press OK when Scan to USB appears on the bottom line of the
display.
Direct Print option supported file types:
• BMP: BMP Uncompressed
• TIFF: TIFF 6.0 Baseline
5
Press OK, Color Start or Black Start when USB appears.
Regardless of the button you press, the color mode is decided as
• JPEG: JPEG Baseline
Your machine begins scanning the original, and then asks if you
want to scan another page.
To print a document from a USB memory device:
1
2
3
Insert a USB memory device into the USB memory port on your
machine. If one has already been inserted, press USB Print
6
Press OK when Yes appears to scan more pages. Load an original
and press Color Start or Black Start.
Regardless of the button you press, the color mode is decided as
.
Your machine automatically detects the device and reads data
stored on it.
Otherwise, press the Scroll buttons to select No and press OK.
Press the Scroll buttons until the folder or file you want appears
and press OK.
After scanning is complete, you can remove the USB memory device
from the machine.
If you see D in the front of a folder name, there are one or more
files or folders in the selected folder.
Customizing Scan to USB
If you selected a file, skip to the next step.
You can specify image size, file format, or color mode for each scanning
to USB job.
If you selected a folder, press the Scroll buttons until the file you
want appears.
1
2
Press Scan/Email.
4
5
Press the Scroll buttons to select the number of copies to be
printed or enter the number.
Press Menu until Scan Feature appears on the bottom line of the
display and press OK.
Press OK, Color Start or Black Start to start printing the selected
file.
3
4
Press OK when USB Memory appears.
There are two types of mode as following:
Press the Scroll buttons until the setting option you want appears
• OK or Color Start: Color print
and press OK.
• Black Start: Black and White print
You can set the following options:
After printing the file, the display asks if you want to print another
job.
• Scan Size: Sets the image size.
• Original Type: Sets the original document’s type.
• Resolution: Sets the image resolution.
6
Press OK when Yes appears to print another job, and repeat from
step 2.
• Scan Color: Sets the color mode. If you select Mono in this
option, you can not select JPEG in Scan Format.
Otherwise, press the Scroll buttons to select No and press OK.
11.2
<Using USB flash memory>
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press Stop/Clear to return to Standby mode.
Managing USB memory
You can delete image files stored on a USB memory device one by one
or all at once by reformatting the device.
Backing up data (CLX-3160FN only)
Caution
Data in the machine’s memory can be accidentally erased due to power
failure or storage failure. Backup helps you protect your Address Book
entries and the system settings by storing them as backup files on a USB
memory device.
• After deleting files or reformatting a USB memory device, files
cannot be restored. Therefore, confirm that you no longer
need the data before deleting it.
Backing up data
Deleting an image file
1
Insert the USB memory device into the USB memory port on your
machine.
1
Insert the USB memory device into the USB memory port on your
machine.
2
Press Menu until System Setup appears on the bottom line of the
display and press OK.
2
3
Press Scan/Email.
Press OK when Scan to USB appears on the bottom line of the
3
4
Press OK when Machine Setup appears.
display.
Press the Scroll buttons until Export Setting appears and press
OK.
4
5
6
Press the Scroll buttons until File Manage appears and press OK.
Press OK when Delete appears.
5
Press the Scroll buttons until the option you want appears.
• Address Book: Backs up all Address Book entries.
• Setup Data: Backs up all system settings.
Press the Scroll buttons until the folder or file you want appears
and press OK.
Note
6
7
Press OK to begin backing up the data.
• If you see D in the front of a folder name, there are one or
more files or folders in the selected folder.
The data is backed up to the USB memory.
If you selected a file, the display shows the size of the file for about
2 seconds. Go to the next step.
Press Stop/Clear to return to Standby mode.
If you selected a folder, press the Scroll buttons until the file you
want to delete appears and press OK.
Restoring data
1
Insert the USB memory device on which the backup data is stored
in to the USB memory port.
7
8
Press OK when Yes appears to confirm your selection.
Press Stop/Clear to return to Standby mode.
2
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Formatting a USB memory device
3
4
Press OK when Machine Setup appears.
1
Insert the USB memory device into the USB memory port on your
machine.
Press the Scroll buttons until Import Setting appears and press
OK.
2
3
Press Scan/Email.
5
6
7
8
Press the Scroll buttons until the data type you want appears and
press OK.
Press OK when Scan to USB appears on the bottom line of the
display.
Press the Scroll buttons until the file containing the data you want
to restore appears and press OK.
4
5
6
7
Press the Scroll buttons until File Manage appears and press OK.
Press the Scroll buttons until Format appears and press OK.
Press OK when Yes appears to confirm your selection.
Press Stop/Clear to return to Standby mode.
Press OK when Yes appears to restore the backup file to the
machine.
Press Stop/Clear to return to Standby mode.
11.3
<Using USB flash memory>
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the USB memory status
You can check the amount of memory space available for scanning and
saving documents.
1
Insert the USB memory device into the USB memory port on your
machine.
2
3
Press Scan/Email.
Press OK when Scan to USB appears on the bottom line of the
display.
4
5
Press the Scroll buttons until Check Space appears and press
OK.
The available memory space appears on the display.
Press Stop/Clear to return to the Standby mode.
Printing directly from a digital camera
This machine supports the PictBridge feature. You can print images
directly from any PictBridge-compatible device, such as a digital camera,
camera phone, and camcorder. You do not need to connect it to a
computer.
1
2
Turn on the machine.
Connect your PictBridge-compatible device to the memory port on
the front of the machine using the USB cable supplied with the
device.
3
Send an order to print images from the PictBridge-compatible
device.
11.4
<Using USB flash memory>
Download from Www.Somanuals.com. All Manuals Search And Download.
How to purchase
12 Ordering supplies and
accessories
This chapter provides information on purchasing supplies and
accessories available for your machine.
To order Samsung-authorized supplies or accessories, contact your
local Samsung dealer or the retailer where you purchased your machine,
information on calling for technical support.
•
•
•
Supplies
When the toner runs out or, the life span of the supplies expires you can
order the following types of toner cartridges and supplies for your
machine:
a
Type
Yield
Part number
Black toner cartridge
Cyan toner cartridge
Magenta toner cartridge
Yellow toner cartridge
Imaging unit
Approx. 2,000 pages CLP-K300A
Approx. 1,000 pages CLP-C300A
Approx. 1,000 pages CLP-M300A
Approx. 1,000 pages CLP-Y300A
Approx. 20,000
black pages or
50,000 images
CLP-R300A
Waste toner container
Approx. 5,000
images
CLP-W300A
b
(1,250 color pages)
a. Average A4-/letter sized page count based on 5% coverage of indivisual colors
on each page. Usage conditions and print patterns may cause results to vary.
b. Image counts based on one color on each page. If you print documents in full
color(Cyan, Magenta, Yellow, Black), the life of this item will be reduced by
25%.
Accessories
You can purchase and install accessories to enhance your machine’s
performance and capacity.
The following accessories are available for your machine:
Accessory
Description
Part number
Optional tray 2
If you are experiencing
frequent paper supply
problems, you can attach an
additional 250 sheets of plain
paper tray.
CLX-S3160A
12.1
<Ordering supplies and accessories>
Download from Www.Somanuals.com. All Manuals Search And Download.
Report/List
Description
13 Maintenance
This list shows the documents currently stored
Schedule Jobs for delayed faxes along with the starting time
This chapter provides information for maintaining your machine and the
toner cartridge.
and type of each operation.
This chapter includes:
This list shows the fax numbers specified as junk
fax numbers. To add or delete numbers to or
from this list, access the Junk Fax Setup menu.
Junk Fax
Report
•
•
•
•
•
•
•
•
•
See page 10.2.
This list shows information on your machine’s
network connection and configuration.
Network Info.
This report shows information for the Network
Scan records including IP address, time and
date, the number of pages scanned, and results.
This report is automatically printed every
50 network scan jobs.
NetScan
Report
This list shows authorized users who are
allowed to use the email function.
User Auth List
Printing reports
Printing a report
Your machine can provide various reports with useful information you will
need. The following reports are available:
1
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Reports in the colored cells are only available with CLX-3160FN.
2
3
Press the Scroll buttons until Report appears and press OK.
Report/List
Description
Press the Scroll buttons until the report or list you want to print
appears and press OK.
This list shows the status of the user-selectable
options. You may print this list to confirm your
changes after changing settings.
Configuration
To print all reports and lists, select All Report.
4
Press OK when Yes appears to confirm printing.
This list shows the current status of
consumables in your machine.
Supplies Info
Address Book
The selected information prints out.
This list shows all of the fax numbers and email
addresses currently stored in the machine’s
memory.
Other available reports(CLX-3160FN only)
Your machine prints the following reports automatically or depending on
your setting.
Send Report
This report shows the fax number, the number of
pages, the elapsed time of the job, the
communication mode, and the communication
results for a particular fax job.
• Multi-communication Report: prints automatically after sending
faxes from more than one location.
• Power Failure Report: prints out automatically when power is
restored after a power failure if any data loss occurs due to the power
failure.
You can set up your machine to automatically
print a transmission confirmation report after
Sent Report
This report shows information on the faxes and
emails you have recently sent.
You can set the machine to automatically print
this report every 50 communications. See
page 10.2.
Fax Rcv Report This report shows information on the faxes you
have recently received.
13.1
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing memory
Cleaning your machine
You can selectively clear information stored in your machine’s memory.
To maintain print and scan quality, follow the cleaning procedures below
each time the toner cartridge is replaced or if print and scan quality
problems occur.
Caution
• For CLX-3160FN users, before clearing the memory, make
sure that all fax jobs have been completed, or you will lose
those jobs.
Caution
• Cleaning the cabinet of the machine with cleaning materials
containing large amounts of alcohol, solvent, or other strong
substances can discolor or distort the cabinet.
1
2
3
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Clear Setting appears and press
OK.
Cleaning the outside
Clean the cabinet of the machine with a soft lint-free cloth. You can
dampen the cloth slightly with water, but be careful not to let any water
drip onto or into the machine.
Press the Scroll buttons until the item you want to clear appears.
The options in the colored cells are available only with CLX-
3160FN.
Cleaning the inside
Options
Description
During the printing process, paper, toner, and dust particles can
accumulate inside the machine. This buildup can cause print quality
problems, such as toner specks or smearing. Cleaning the inside of the
machine clears or reduces these problems.
Clears all of the data stored in memory and
resets all of your settings to the factory default.
All Settings
Restores all of the fax options to the factory
default.
Fax Setup
1
Turn the machine off and unplug the power cord. Wait for the
machine to cool down.
Restores all of the copy options to the factory
default.
Copy Setup
Scan Setup
System Setup
Network
2
Open the front cover and pull the imaging unit out of the machine
using the handle on its bottom.
Restores all of the scan options to the factory
default.
Restores all of the system options to the
factory default.
Restores all of the network options to the
factory default.
Address Book Clears all of the fax number and email address
entries stored in memory.
Sent Report
Clears all records of sent faxes and emails.
Clears all records of received faxes.
Fax Rcv
Report
NetScan
Report
Clears the information on network scan
sessions in memory.
4
5
6
7
Press OK when Yes appears.
Press OK again to confirm clearing.
Repeat steps 3 through 5 to clear another item.
Press Stop/Clear to return to Standby mode.
13.2
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Extend the top handle on the imaging unit and then use it to pull the
imaging unit out of the machine completely.
5
Pull the imaging unit about half and push it until it sounds ‘click’.
Repeat this action two or three times.
6
Push the imaging unit until it sounds ‘click’ in to the machine.
Cautions
• To prevent damage to the imaging unit, do not expose it to
light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface on the imaging unit with your
hands or any other material. Use the handle on it to avoid
touching this area.
• Be careful not to scratch the surface of the imaging unit.
4
With a dry lint-free cloth, wipe away any dust and spilled toner.
7
8
Close the front cover firmly.
Caution
• If the front cover is not completely closed, the machine will not
operate.
Plug in the power cord and turn the machine on.
Note
Caution
• After cleaning, let the printer to dry completely.
• If there is a cracking sound, re-install the imaging unit. The
imaging unit is not properly installed.
13.3
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Expected cartridge life
Cleaning the scan unit
The life of the toner cartridge depends on the amount of toner that print
jobs require. When printing text at 5% coverage, a new toner cartridge
lasts an average of 2,000 pages for black and white printing and 1,000
pages for each color printing. However, the toner cartridge that is
shipped with the printer prints 1,500 pages for black and white, 700
pages for colors.
Keeping the scan unit clean helps ensure the best possible copies. We
suggest that you clean the scan unit at the start of each day and during
the day, as needed.
1
2
3
Slightly dampen a soft lint-free cloth or paper towel with water.
Open the scanner lid.
The actual number may also be different depending on the print density
of the pages you print on, and the number of pages may be affected by
operating environment, printing interval, media type, and media size. If
you print a lot of graphics, you may need to change the cartridge more
often.
Wipe the surface of the scanner glass and ADF glass until it is
clean and dry.
Redistributing toner
1
3
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner Low appears on the display.
• The Status LED blinks red.
2
4
If this happens, you can temporarily reestablish print quality by
redistributing the remaining toner in the cartridge. In some cases, white
streaks or light printing will still occur even after you have redistributed
the toner.
1
2
Open the front cover.
white sheet
ADF glass
1
2
3
4
Pull the corresponding toner cartridge out.
scanner lid
scanner glass
4
5
Wipe the underside of the scanner lid and white sheet until it is
clean and dry.
Close the scanner lid.
Maintaining the toner cartridge
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in
mind:
3
Holding the toner cartridge, thoroughly roll it 5 or 6 times to
distribute the toner evenly inside the cartridge.
• Do not remove the toner cartridge from its package until ready for
use.
• Do not refill the toner cartridge. The machine warranty does not cover
damage caused by using a refilled cartridge.
• Store toner cartridges in the same environment as your machine.
• To prevent damage to the toner cartridge, do not expose it to light for
more than a few minutes.
13.4
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Pull the corresponding toner cartridge out.
Note
• If toner gets on your clothing, wipe it off with a dry cloth
and wash clothing in cold water. Hot water sets toner into
fabric.
4
Grasp the toner cartridge and align it with the corresponding slot
inside the machine. Insert it back into its slot until it clicks into place.
4
5
Take a new toner cartridge out of its package.
Holding the toner cartridge, thoroughly roll it 5 or 6 times to
distribute the toner evenly inside the cartridge.
5
Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each
one: yellow (Y), magenta (M), cyan (C), and black (K).
6
Remove the cartridge cap.
When the toner cartridge is completely empty:
• Toner Empty appears on the display.
• The Status LED lights red.
• The machine stops printing. For the CLX-3160FN, incoming faxes are
saved in memory.
At this stage, the toner cartridge needs to be replaced. For order
Note
1
Turn the machine off, then wait a few minutes for the machine to
cool.
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
2
Open the front cover.
13.5
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Grasp the toner cartridge and align it with the corresponding slot
inside the machine. Insert it into its slot until it clicks into place.
Sending new toner notification (CLX-3160FN only)
You can set your machine to automatically send a fax to your service
company or dealer to notify them that your machine requires a new toner
cartridge when the toner cartridge needs to be replaced. The fax number
needs to be set by your dealer prior to using this feature, otherwise the
machine cannot send a notification even though you turn this service on.
1
2
3
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Maintenance appears and press
OK.
Press the Scroll buttons until Remote Service appears and press
OK.
4
5
6
7
Enter a password and press OK.
Re-enter the password and press OK.
8
Close the front cover. Make sure that the cover is securely latched
and then turn the machine on.
Press the Scroll buttons to select On and press OK.
Press Stop/Clear to return to Standby mode.
Caution
Once this feature has been enabled, you need to enter the password
each time you disable or enable it.
• If the front cover is not completely closed, the machine will not
operate.
Note
• If the installation is completed properly, a guide report is
printed out automatically. Wait for about 1.5 minutes for the
machine to get ready.
• When printing text at 5% coverage, you can expect a toner
cartridge life of about 2,000 pages for black and white printing
and 1,000 pages for color printing.
13.6
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Extend the top handle on the imaging unit and then use it to pull the
imaging unit out of the machine completely.
Replacing the Imaging Unit
The life of the imaging unit is approximately 20,000 pages for black or
50,000 image printing whichever comes first. When the life span of the
imaging unit has expired, Replace Imaging Unit appears on the display
of the control panel, indicating the imaging unit needs to be replaced.
Otherwise your printer stops printing.
To replace the imaging unit:
1
Turn the machine off, then wait a few minutes for the machine to
cool.
2
3
Open the front cover.
Remove all of the toner cartridges and waste toner container from
the machine.
6
Take a new imaging unit out of its package. Remove the protective
devices on both sides of the imaging unit and the paper protecting
the surface of the imaging unit.
4
Pull the imaging unit out of the machine using the handle on its
bottom.
Cautions
• Don’t use sharp objects, such as a knife or scissors, to open
the imaging unit package. You could damage the surface of
the imaging unit.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
13.7
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Holding the handles on the new imaging unit, push the imaging unit
until it sounds ‘click’ into the machine.
9
Insert the toner cartridges and waste toner container into their
corresponding slots until they click into place.
8
Remove four dummy caps which are on the toner cartridge
entrances of the imaging unit. When you remove the dummy cap
from the cartridge, lift the handle up and pull it out.
10 Close the front cover firmly.
Caution
• If the front cover is not completely closed, the machine will not
operate.
11 Turn the machine on.
Note
• After rebooting, your machine will automatically reset the
counter for the imaging unit.
• If the installation is completed properly, a guide report is
printed out automatically. Wait for about 1.5 minutes for the
machine to get ready.
Caution
• If there is a cracking sound, re-install the imaging unit. The
imaging unit is not properly installed.
Caution
• If you force too much to the dummy caps, it may cause
problem.
13.8
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Insert the new container into position and then push it to make sure
that it is firmly seated in place.
Replacing the Waste Toner Container
The life of the waste toner container unit is approximately 1,250 pages
for full color 5% image printing or 5,000 pages for black printing. When
the life span of the waste toner container has expired, Replace/Install
Waste Toner Tank appears on the display of the control panel,
indicating the waste toner container needs to be replaced. Otherwise
your printer stops printing.
To replace the waste toner container:
1
Turn the machine off, then wait a few minutes for the machine to
cool.
2
3
Open the front cover.
Pull the waste toner container out of the machine using its handle.
7
8
Close the front cover firmly.
Caution
• If the front cover is not completely closed, the machine will not
operate.
Turn the machine on.
Note
• After rebooting, your machine will automatically reset the
counter for the waste toner container.
Note
• Make sure that you lay the waste toner container on a flat
surface so that the toner does not spill.
4
Remove the container’s cap from the ontainer as shown below, and
use it to close the waste toner container opening.
Caution
• Do not tilt or turn over the container.
5
Take a new waste toner container out of its package.
13.9
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the ADF rubber pad
Maintenance Parts
You will need to replace the ADF rubber pad when there seems to be a
consistent problem with paper pickup or when its specified yield is
reached.
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
1
2
Open the ADF cover.
Rotate the bushing on the right end of the ADF roller toward the
ADF and remove the roller from the slot.
Items
ADF rubber pad
Yield (Average)
Approx. 20,000 pages
Approx. 60,000 images
Approx. 100,000 pages
Transfer belt
1
2
Transfer roller
Approx. 100,000 black pages or
50,000 color pages
Fuser unit
Tray rubber pad
Pickup roller
Approx. 250,000 pages
Approx. 50,000 pages
Samsung highly recommends that an authorized service provider,
dealer or the retailer where you bought printer performs this
maintenance activity.
1
2
bushing
ADF roller
Checking replaceables
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
3
Remove the ADF rubber pad from the ADF, as shown.
The following information are available for checking the replaceable
elements of your machine:
• Supplies Info: prints the supply information page.
• Total: displays the total number of pages printed.
1
• ADF Scan: displays the number of pages scanned using the ADF.
• Platen Scan: displays the number of pages scanned using the
scanner glass.
• Imaging Uint, Transfer Belt, Fuser, TransferRoller, Tray1 Roller,
Tray2 Roller: displays the number of pages printed each item.
To check the replaceables:
1
2
3
4
5
6
Press Menu until System Setup appears on the bottom line of the
display and press OK.
ADF rubber pad
1
Press the Scroll buttons until Maintenance appears and press
OK.
4
Insert a new ADF rubber pad into place.
Press the Scroll buttons until Supplies Life appears and press
OK.
Press the Scroll buttons until the item you want appears and press
OK.
If you selected to print a supply information page, press OK to
confirm.
Press Stop/Clear to return to Standby mode.
13.10
<Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Align the left end of the ADF roller with the slot and push the right
end of the roller into the right slot. Rotate the bushing on the right
end of the roller toward the document input tray.
Checking the machine’s serial number
When you call for service or register as a user on the Samsung website,
the machine’s serial number may be required.
You can check the serial number by taking the following steps:
1
2
3
Press Menu until System Setup appears on the bottom line of the
display and press OK.
Press the Scroll buttons until Maintenance appears and press
OK.
Press the Scroll buttons until Serial Number appears and press
OK.
4
5
Check your machine’s serial number.
Press Stop/Clear to return to Standby mode.
6
Close the ADF cover.
Managing your machine from the website
If you have connected your machine to a network and set up TCP/IP
network parameters correctly, you can manage the machine via
Samsung’s SyncThru™ Web Service, an embedded web server. Use
SyncThru™ Web Service to:
• View the machine’s device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
• Set the machine to send email notifications to let you know the
machine’s status.
• Get support for using the machine.
To access SyncThru™ Web Service:
1
2
Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click Go.
Your machine’s embedded website opens.
13.11
<
Maintenance>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Close the ADF cover. Then load the removed pages, if any, back
into the ADF.
14 Troubleshooting
This chapter gives helpful information for what to do if you encounter an
error.
This chapter includes:
•
•
•
•
Clearing document jams
When an original jams while passing through the ADF, Document Jam
appears on the display.
1
2
Remove any remaining pages from the ADF.
Open the ADF cover.
Note
• To prevent document jams, use the scanner glass for thick,
thin, or mixed paper-type originals.
Exit misfeed
1
1
2
Open the scanner lid.
Turn the release knob to the direction as shown to remove the
misfed paper from the document output tray.
1
2
1
ADF cover
3
Pull the jammed paper gently out of the ADF.
1
2
release knob
scanner lid
3
Close the scanner lid. Then load the removed pages back into the
ADF.
14.1
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller misfeed
In the tray 1
1
2
Open the scanner lid.
1
Open and close the front cover. The jammed paper is automatically
ejected from the machine.
Seize the misfed paper, and remove the paper from the feed area
by carefully pulling it to the right using both hands.
If the paper does not exit, go to the next step.
2
Pull the tray 1 out of the machine.
3
Remove the jammed paper by gently pulling it straight out.
3
Close the scanner lid. Then load the removed pages back into the
ADF.
Clearing paper jams
When a paper jam occurs, Paper Jam appears on the display. Refer to
the table below to locate and clear the paper jam.
Message
Location of jam
Go to
the next
colume,
Paper Jam 0
In the paper feed area (tray 1,
optional tray 2)
Open/Close Door
Paper Jam 1
Open/Close Door
In the paper exit area
Paper Jam 2
Check Inside
In the fuser area or around the
toner cartridge
If the paper does not move when you pull, or if you do not see the
paper in this area, check the paper exit area. See page 14.4.
Manual Feeder
Paper Jam 0
In the paper feed area
4
Insert the tray 1 into the machine until it snaps into place. Printing
automatically resumes.
Caution
• To avoid tearing the paper, pull out the jammed paper gently
and slowly. Follow the instructions in the following sections to
clear the jam.
14.2
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Open the jam cover in the optional tray 2.
In the optional tray 2
1
Pull the optional tray 2 out of the machine.
5
Pull the jammed paper out in the direction shown.
2
Remove the jammed paper from the machine.
6
Close the jam cover. Printing automatically resumes.
3
Insert the tray 1 into the machine until it snaps into place. Printing
automatically resumes.
If the paper does not move when you pull, or if you do not see the
paper in this area, go to the next step.
14.3
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
In the mamual feeder
In the paper exit area
1
2
Pull the tray 1 out.
1
Open and close the front cover. The jammed paper is automatically
ejected from the machine.
Push the manual feeder tab down.
2
Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance
when you pull, stop and go to the next step.
3
Pull the Jammed paper out of the manual feeder.
3
4
Open the rear cover.
If you see the jammed paper, pull it straight up. Skip to step 8.
4
Insert the tray 1 into the machine until it snaps into place. Printing
automatically resumes.
If you still do not see the paper, go to the next step.
14.4
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Open the fuser door.
Understanding display messages
Messages appear on the control panel display to indicate the machine’s
status or errors. Refer to the tables below to understand the messages’
meaning and correct the problem if necessary. Messages and their
meanings are listed in alphabetical order.
1
Note
• When you call for service, it is very convenient to tell the
service representative the display message.
Messages in the colored cells are available only with CLX-3160FN.
Message
Meaning
Suggested solutions
The color toner
cartridge has run
out. The machine
stops printing.
Replace the color
toner cartridge with a
new one. See page
[Color]
Toner Empty
fuser door
1
6
Locate the jammed paper and pull it out.
Take out the toner
cartridge and
The corresponding
color toner cartridge
is almost empty.
thoroughly shake it.
By doing this, you can
temporarily
[Color]
Toner Low
reestablish printing
operations.
The machine
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
received several
papers with many
images, and it can
not supply the toner
properly.
[Color] Toner
Supply Error
The machine has a
communication
problem.
Ask the sender to try
again.
[COMM. Error]
[Incompatible]
7
8
Close the fuser door.
Close the rear cover. Printing automatically resumes.
The received fax data
will be deleted.
The machine has
received a fax from
which is registered
as a junk fax.
Reconfirm junk fax
setup. See page 10.2
Tips for avoiding paper jams
Try again. If the
problem persists, wait
an hour or so for the
line to clear and try
again.
By selecting the correct media types, most paper jams can be avoided.
Your machine
cannot connect with
the receiving fax
machine or has lost
contact because of a
problem with the
phone line.
are positioned correctly.
[Line Error]
• Do not overload the tray. Ensure that the paper level is under the
brackets of the tray 1.
Or, turn the ECM
mode on. See page
10.1.
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
The receiving fax
machine has not
answered after
several redial
attempts.
Try again. Make sure
that the receiving
machine is
[No Answer]
operational.
.
• Ensure that the recommended print side of print media is facing up in
the mamual tray and tray 1.
14.5
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
Stop/Clear has
been pressed during Try again.
an operation.
You have tried to
select a group
location number
where only a single
location number can
be used, such as
when adding
[Stop Pressed]
Use a speed dial
number or dial a
number manually
using the number
keypad.
To cancel the fax job,
press the OK button
to accept Yes.
Group Not
Available
If you want to send
those pages that
have been
locations for a
Multiple Send
operation.
Your machine’s
memory has
become full while
trying to store an
original into memory.
Cancel?
Yes
successfully stored,
press the OK button
to accept No. You
should send the
remaining pages
later, when memory is
available.
The color toner
cartridge is not
installed.
Install
[Color] Toner
Install the color toner
cartridge.
The corresponding
part of the machine
is not installed.
Install
[Part]
Install the part into
your machine.
Check the server
settings and the
network cable.
Install the a
Connection with the
SMTP server failed.
The color toner
cartridge you have
installed is not for
your machine.
Connection Error
Samsung-genuine
color toner cartridge
designed for your
machine.
Invalid
[Color] Toner
Data Read Fail
Check USB Mem.
Time expired while
reading data.
Try again.
Install the a
Data Write Fail
Check USB Mem.
Storing to the USB
memory failed.
Check the available
USB memory space.
The color part of the
machine is not for
your machine.
Invalid
[Part]
Samsung-genuine
part designed for your
machine.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Deve Home Sensor There is a problem
Error
The receiving fax
machine did not
in the fuser unit.
Try again after a few
answer or the line is minutes.
already engaged.
Line Busy
The loaded original
has jammed in the
ADF.
Clear the jam. See
Unplug the power
Document Jam
cord and plug it back
in. If the problem
persists, please call
for service.
Low Heat Error
Cycle Power
There is a problem
in the fuser unit.
The front cover or
rear cover is not
securely latched.
Close the cover until it
locks into place.
Door Open
Enter Again
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
A problem has
occurred in the LSU
(Laser Scanning
Unit).
You entered an
unavailable item.
Enter the correct item
again.
LSU Hsync Error
Cycle Power
The selected file
format is not
supported.
File Format
Not Supported
Use the correct file
format.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
A problem has
occurred in the LSU
(Laser Scanning
Unit).
LSU Motor Error
Cycle Power
There is a problem
in the cooling fan of
the machine.
Fuser Fan
Locked
Open and then close
the front cover.
Main Motor
Locked
There is a problem
in the main motor.
Open and then close
the front cover.
14.6
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
The mail size is
larger than the
supported size by
SMTP server.
Paper has jammed
in the paper exit
area.
Paper Jam 1
Clear the jam. See
page 14.4.
Mail Exceeds
Server Support
Divide your mail or
reduce the resolution.
Open/Close Door
Paper has jammed
In the fuser area or
around the toner
cartridge
Paper Jam 2
Check Inside
Delete unnecessary
fax jobs and
retransmit after more
memory becomes
available.
Alternatively, split the
transmission into
more than one
operation.
Clear the jam. See
page 14.4.
The paper size
specified in the
printer properties
does not match the
paper you are
loading.
Memory Full
The memory is full.
Tray 1
Paper Mismatch
Load the correct
paper in the tray 1.
Manual Feeder
Paper Empty
There is no paper in Load paper in the
The paper size
specified in the
printer properties
does not match the
paper you are
loading.
the manual feeder.
manaul feeder.
Paper has jammed
in the feeding area
of the manual feeder.
Tray 2
Paper Mismatch
Load the correct
paper in the tray 2.
Manual Feeder
Paper Jam 0
Clear the jam. See
There is a problem
with the network.
Contact your network
administrator.
Network Error
Not Assigned
Paper has jammed
In the paper feed
area.
Tray 2
Paper jam 0
Clear the jam. See
page 14.3.
The speed button or Enter the number
speed dial number
you tried to use has
manually using the
number keypad or
Power has turned off The job which you
no number assigned store the number or
then on and the
machine’s memory
has not been back
up.
were trying to do
before the power
failure must be
to it.
address.
Power Failure
Single page data
exceeds the
configured mail size.
completely re-done.
One Page is
Too Large
Reduce the resolution
and try again.
The print quality may
get poor if the refilled
toner cartridge is
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Open Heat Error
Cycle Power
The toner cartridge
you have installed is characteristics may
not genuine or
refilled.
installed, since its
There is a problem
in the fuser unit.
Refilled
[Color] Toner
significantly differ
from the genuine.
We recommend
Samsung-genuine
color toner cartridge.
You are in the Add
Page/Cancel Job
operation, but there
are no jobs stored.
Check the display to
see if there are any
scheduled jobs.
Operation
Not Assigned
This message
Replace the toner
cartridge with a new
Replace
[Color] Toner
appears between
Toner Empty and
Toner Low status.
The output tray of
the machine is full of Remove paper.
paper.
Out-Bin Full
Replace the part with
a new one. Call for
service.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
Replace
[Part]
The life of the part
expires totally.
Over Heat Error
Cycle Power
There is a problem
in the fuser unit.
Replace
[Part] Soon
The life of the part
expires soon.
call for service.
for service.
Paper has jammed
Clear the jam. See
in the feeding area
of the tray.
Paper Jam 0
Open/Close Door
14.7
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
Meaning
Suggested solutions
Solving other problems
The life span of the
waste toner tank has
expired and the
printer will stop
printing until a new
waste toner tank is
placed into the
The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the
problem is corrected. If the problem persists, please call for service.
Replace/Install
Waste Toner Tank
See page 13.9
Paper feeding problems
printer.
Condition
Suggested solutions
The machine is
waiting for a
specified time
interval to redial a
previously busy
station.
Paper is jammed
during printing.
Clear the paper jam. See page 14.2.
You can press OK to
immediately redial, or
Stop/Clear to cancel
the redial operation.
Retry Redial?
• Ensure that there is not too much paper in the
tray. The tray can hold up to 150 sheets of
paper, depending on the thickness of your
paper.
• Make sure that you are using the correct type
of paper. See page 5.4.
• Remove paper from the tray and flex or fan the
paper.
• Humid conditions may cause some paper to
stick together.
Unlock the scanner
and press Stop/
Clear.
The scanner module
is locked
Paper sticks
together.
Scanner locked
The jam cover in the
optional tray 2 is
open.
SCF
Cover Open
Close the jam cover
in the optional tray 2.
There is a problem
in SMTP
authentication.
Send Error
(AUTH)
Configure the
authentication setting.
• Different types of paper may be stacked in the
tray. Load paper of only one type, size, and
weight.
• If multiple sheets have caused a paper jam,
Multiple sheets
of paper do not
feed.
Send Error
(DNS)
There is a problem
in DNS.
Configure the DNS
setting.
Send Error
(POP3)
There is a problem
in POP3.
Configure the POP3
setting.
• Remove any obstructions from inside the
machine.
• Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove
excess paper from the tray.
• The paper is too thick. Use only paper that
meets the specifications required by the
machine. See page 5.2.
• If an original does not feed into the machine,
the ADF rubber pad may require to be
replaced. See page 13.10.
Send Error
(SMTP)
There is a problem
in SMTP.
Change to the
available server.
Paper does not
feed into the
machine.
There is a problem
on the network
interface card.
Configure your
network interface
card correctly.
Send Error
(Wrong Config)
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
A problem has
occurred in the
transfer belt in the
machine.
Transfer Belt
Error
• There is too much paper in the tray. Remove
excess paper from the tray. If you are printing
on special materials, use the mamual tray.
• An incorrect type of paper is being used. Use
only paper that meets the specifications
• There may be debris inside the machine. Open
the front cover and remove the debris.
• If an original does not feed into the machine,
the ADF rubber pad may require to be
replaced. See page 13.10.
Tray 1
There is no paper in Load paper in the tray
Paper Empty
Tray 2
There is no paper in Load paper in the
the optional tray 2. optional tray 2.
The paper keeps
jamming.
Paper Empty
14.8
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Possible cause
Suggested solutions
Transparencies
stick together in
the paper exit.
Use only transparencies specifically designed for
laser printers. Remove each transparency as it
exits from the machine.
The printer driver
may be incorrectly
installed.
Repair the printer software.
See the Software Section
.
Envelopes skew
or fail to feed
correctly.
Check the display message
on the control panel to see if
the machine is indicating a
system error.
Ensure that the paper guides are against both
sides of the envelopes.
The
The machine is
malfunctioning.
machine
does not
print.
The document size is
so big that the hard
disk space of the
computer is not
enough to access the
print job.
Printing problems
(continued)
Get more hard disk space
and print the document
again.
Condition
Possible cause
Suggested solutions
Check the power cord
connections. Check the
power switch and the power
source.
The machine is not
receiving power.
The
machine
selectsprint The paper source
materials
from the
wrong
paper
source.
For many software
applications, the paper
source selection is found
under the Paper tab within
the printer properties. Select
the correct paper source.
See the printer driver help
screen.
The machine is not
selected as the
default printer.
Select Samsung CLX-3160
Series as your default
printer in your Windows.
selection in the
printer properties
may be incorrect.
Check the machine for the following:
• The front cover is not closed. Close the cover.
• The toner cartridge is not installed. Install the toner
cartridge.
Reduce the complexity of the
page or try adjusting the print
quality settings.
The job may be very
complex.
If a system error occurs, contact your service
representative.
From the Start menu,
choose Settings and then
Printers. Right-click the
Samsung CLX-3160 Series
machine icon, choose
Properties, click the Details
tab, and then choose the
Spool Settings button.
Select the desired spool
setting.
A print job
isextremely
slow.
The connection cable
The
If you are using
between the
machine
does not
print.
Windows 9x/Me, the
Spool Setting may be
set incorrectly.
Disconnect the printer cable
computer and the
and reconnect it.
machine is not
connected properly.
If possible, attach the cable
The connection cable
to another computer that is
between the
working properly and print a
computer and the
The page orientation
setting may be
incorrect.
Change the page orientation
in your application. See the
printer driver help screen.
job. You can also try using a
machine is defective.
different printer cable.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
Ensure that the paper size in
the printer driver settings
matches the paper in the
tray.
Half the
page is
blank.
The port setting is
port. If the computer has
incorrect.
The paper size and
the paper size
settings do not
match.
more than one port, make
Or, ensure that the paper
size in the printer driver
settings matches the paper
selection in the software
application settings you use.
sure that the machine is
attached to the correct one.
The machine may be
configured
incorrectly.
Check the printer properties
to ensure that all of the print
settings are correct.
14.9
<
Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing quality problems
Condition
Possible cause
Suggested solutions
If the inside of the machine is dirty or paper has been loaded improperly,
you may notice a reduction in print quality. See the table below to clear
the problem.
Disconnect the printer cable
and reconnect. Try a print job
that you have already printed
successfully. If possible,
attach the cable and the
machine to another
computer and try a print job
that you know works. Finally,
try a new printer cable.
The printer cable is
loose or defective.
Condition
Suggested solutions
If a vertical white streak or faded area appears
on the page:
The
• The toner supply is low. You may be able to
temporarily extend the toner cartridge life.
print quality, install a new toner cartridge.
• The paper may not meet paper
machine
prints, but
the text is
wrong,
garbled, or
incomplete.
Check the application’s
printer selection menu to
ensure that your machine is
selected.
Light or faded
print
The wrong printer
driver was selected.
specifications; for example, the paper is too
The software
application is
malfunctioning.
Try printing a job from
another application.
• If the entire page is light, the print resolution
setting is too low. Adjust the print resolution.
See the help screen of the printer driver.
• A combination of faded or smeared defects
may indicate that the toner cartridge needs
cleaning.
The operating
system is
malfunctioning.
Exit Windows and reboot the
computer. Turn the machine
off and then back on again.
• The surface of the LSU part inside the
machine may be dirty. Clean the LSU. See
Redistribute the toner, if
necessary. See page 13.4.
The toner cartridge is
defective or out of
toner.
If necessary, replace the
toner cartridge.
Toner specks
• The paper may not meet specifications; for
example, the paper is too moist or too
• The transfer roller may be dirty. Clean the
• The paper path may need cleaning. See
Pagesprint,
but are
blank.
Check the file to ensure that
it does not contain blank
pages.
The file may have
blank pages.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Some parts, such as
the controller or the
board, may be
Contact a service
representative.
defective.
The
illustrations
print
incorrectly
in Adobe
Illustrator.
If faded areas, generally rounded, occur
randomly on the page:
Select Download as Bit
Image in the TrueType
Options window of the
graphic properties and print
the document again.
The setting in the
software application
is wrong.
• A single sheet of paper may be defective.
Try reprinting the job.
Dropouts
• The moisture content of the paper is uneven
or the paper has moist spots on its surface.
Try a different brand of paper. See page 5.2.
• The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go
to printer properties, click Paper tab, and
set type to Thick. Refer to the Software
Section for details.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• If these steps do not correct the problem,
contact a service representative.
14.10
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Suggested solutions
If black vertical streaks appear on the page:
Background scatter results from bits of toner
randomly distributed on the printed page.
Vertical lines
• The drum inside the toner cartridge has
probably been scratched. Remove the toner
cartridge and install a new one. See page
• The paper may be too damp. Try printing
with a different batch of paper. Do not open
packages of paper until necessary so that
the paper does not absorb too much
moisture.
• If background scatter occurs on an
envelope, change the printing layout to
avoid printing over areas that have
overlapping seams on the reverse side.
Printing on seams can cause problems.
• If background scatter covers the entire
surface area of a printed page, adjust the
print resolution through your software
application or the printer properties.
Background
scatter
If white vertical streaks appear on the page:
• The surface of the LSU part inside the
machine may be dirty. Clean the LSU. See
page 13.2.
If the amount of background shading becomes
unacceptable:
Color or Black
background
A
• Change to a lighter weight paper. See page
5.2.
• Check the machine’s environment: very dry
(low humidity) or high humidity (higher than
80% RH) conditions can increase the
amount of background shading.
• Remove the old toner cartridge and install a
new one. See page 13.5.
Misformed
characters
• If characters are improperly formed and
producing hollow images, the paper stock
may be too slick. Try a different paper. See
page 5.2.
• If characters are improperly formed and
producing a wavy effect, the scanner unit
may need service. For service, contact a
service representative.
Toner smear
• Clean the inside of the machine. See page
• Check the paper type and quality. See page
5.2.
• Remove the toner cartridge and install a
new one. See page 13.5.
Page skew
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
5.2.
If marks repeatedly appear on the printed side
of the page at even intervals:
• Ensure that the paper or other material is
loaded correctly and the guides are not too
tight or too loose against the paper stack.
• The toner cartridge may be damaged. If a
repetitive mark occurs on the page, print a
cleaning sheet several times to clean the
if you still have the same problems, remove
the toner cartridge and install a new one.
See page 13.5.
• Parts of the machine may have toner on
them. If the defects occur on the back of the
page, the problem will likely correct itself
after a few more pages.
Vertical repetitive
defects
A a B b C c
A a B b C c
A a B b C c
A a B b C c
A a B b C c
Curl or wave
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high
temperature and humidity can cause paper
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• The fusing assembly may be damaged.
Contact a service representative.
14.11
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Wrinkles or
Suggested solutions
Condition
Suggested solutions
If horizontally aligned black streaks or smears
appear:
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See page
5.2.
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
Horizontal stripes
creases
• The toner cartridge may be installed
improperly. Remove the cartridge and
reinsert it.
• The toner cartridge may be defective.
Remove the toner cartridge and install a
• If the problem persists, the machine may
require repair. Contact a service
representative.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Back of printouts
are dirty
Curl
If the printed paper is curled or paper does not
feed into the machine:
• Turn over the stack of paper in the tray. Also
try rotating the paper 180° in the tray.
• Change the printer option and try again. Go
to printer properties, click Paper tab, and
set type to Thin. Refer to the Software
Section for details.
Check for leaking toner. Clean the inside of
Your printer is probably being used at an
altitude of 2,500 m (8,200 ft) or above.
Solid Color or
Black pages
• The toner cartridge may not be installed
properly. Remove the cartridge and reinsert
it.
• The toner cartridge may be defective and
need replacing. Remove the toner cartridge
and install a new one. See page 13.5.
• The machine may require repair. Contact a
service representative.
An unknown image
repetitively
The high altitude may affect the print quality
such as loose toner or light imaging. You can
set this option through Printer Settings
Utility or Printer tab in printer driver’s
properties. Refer to the Software Section for
details.
appears on a next
few sheets or loose
toner, light print, or
contamination
occurs.
Copying problems
• Clean the inside of the machine. See page
• Check the paper type and quality. See page
5.2.
• Remove the toner cartridge and install a
new one. See page 13.5.
Loose toner
Condition
Suggested solutions
Copies are too light Use Darkness to darken or lighten the
or too dark.
background of the copies.
• If the problem persists, the machine may
require repair. Contact a service
representative.
• If defects are on the original, press
Darkness to lighten the background of your
copies.
• If no defects are on the original, clean the
Smears, lines,
marks, or spots
appears on copies.
Character voids are white areas within parts of
characters that should be solid black:
Character Voids
• If you are using transparencies, try another
type of transparency. Because of the
composition of transparencies, some
character voids are normal.
• Ensure that the original is face down on the
scanner glass or face up in the ADF.
• Check that the copy paper is loaded
correctly.
Copy image is
skewed.
• You may be printing on the wrong surface of
the paper. Remove the paper and turn it
around.
• The paper may not meet paper
specifications. See page 5.2.
Blank copies print
out.
Ensure that the original is face down on the
scanner glass or face up in the ADF.
A
14.12
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Suggested solutions
• Replace the paper in the tray with paper
from a new package.
• In high humidity areas, do not leave paper
in the machine for extended periods of
time.
• Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
Image rubs off the
copy easily.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
The unit scans
very slowly.
• Fan the stack of paper, then turn it over in
the tray. Replace the paper in the tray with
a fresh supply. Check/adjust the paper
guides, if necessary.
• Ensure that the paper is the proper paper
weight. 75 g/m2 (20 lb bond) paper is
recommended.
Frequent copy
paper jams occur.
Message appears
on your computer
screen:
• Check for copy paper or pieces of copy
paper remaining in the machine after a
paper jam has been cleared.
• There may be a copying or printing job in
progress. When that job is complete, try your
job again.
• “Device can't be
set to the H/W
mode you want.”
• “Port is being
used by another
program.”
• “Port is
Disabled.
• “Scanner is busy
receiving or
printing data.
When the
• The Selected port is currently being used.
Restart your computer and try again.
• The printer cable may be improperly
connected or the power may be off.
• The scanner driver is not installed or the
operating environment is not set up properly.
• Ensure that the machine is properly
connected and the power is on, Then restart
your computer.
• Your originals may contain pictures, solids,
or heavy lines. For example, your originals
may be forms, newsletters, books, or other
documents that use more toner.
• The machine may be turned on and off
frequently.
Toner cartridge
produces fewer
copies than
expected before
running out of
toner.
• The scanner lid may be left open while
copies are being made.
• The USB cable may be improperly
connected or the power may be off.
current job is
completed, try
again.”
• “Invalid handle.”
• “Scanning has
failed.”
Scanning problems
Condition
Suggested solutions
• Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the ADF.
• There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
• Check that the USB cable is connected
properly.
The scanner does
not work.
• Make sure that the USB cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
• Check that the scanner is configured
correctly. Check scan setting in the
SmarThru Configuration or the application
you want to use to make certain that the
scanner job is being sent to the correct port.
14.13
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Scan problems
Condition
Suggested solutions
Condition
Suggested solutions
• The receiving mode should be set to Fax.
• Make sure that there is paper in the tray.
• Check to see if the display shows any error
message. If it does, clear the problem.
Faxes are not
received
automatically.
I cannot find a
scanned image
file.
You can check the scanned file’s destination in
the Advanced page in the Network Scan
program’s Properties screen.
• Make sure that the original is loaded in the
ADF or on the scanner glass.
• Sending should show up on the display.
• Check the fax machine you are sending to,
to see if it can receive your fax.
• Check if the scanned file’s application is on
your computer.
The machine does
not send.
I cannot find the
scanned image
file after
• Check Open immediately with the default
application in the Advanced page in the
Network Scan program’s Properties screen to
open the scanned image immediately after
scanning.
scanning.
• The fax machine sending you the fax may
be faulty.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• The toner cartridge may be empty. Replace
The incoming fax
has blank spaces
or is of poor-
quality.
I forgot my ID
and PIN.
Check your ID and PIN in the Server page in the
Network Scan program’s Properties screen.
I cannot view
the Help file.
To view the Help file, you need to have Internet
Explorer 4 service pack 2 or above.
Some of the words
on an incoming fax
are stretched.
I cannot use the
Samsung
Network Scan
Manager.
The fax machine sending you the fax had a
temporary document jam.
Check your operating system. Supporting
operating systems are Windows 98/Me/2000/XP.
There are lines on
the originals you
send.
Check your scan unit for marks and clean it.
See page 13.4.
The machine dials
a number, but a
connection with the
other fax machine
fails.
The other fax machine may be turned off, out
of paper, or cannot answer incoming calls.
Speak with the other machine operator and
ask her/him to sort out the problem.
Fax problems (CLX-3160FN only)
Condition
Suggested solutions
The machine is not
working, there is no
display and the
buttons are not
working.
• Unplug the power cord and plug it in again.
• Ensure that there is power to the electrical
outlet.
There may not be enough memory space to
store the fax. If the display shows the Memory
Full message, delete from memory any faxes
you no longer need and then try again to store
the fax.
Faxes do not store
in memory.
• Check that the phone line is connected
properly.
• Check that the phone socket in the wall is
working by plugging in another phone.
Blank areas
No dial tone
sounds.
appear at the
bottom of each
page or on other
You may have chosen the wrong paper
settings in the user option setting. For details
strip of text at the
top.
The numbers
stored in memory
do not dial
Make sure that the numbers are stored in
memory correctly. Print a Phone Book list,
correctly.
• Make sure that the paper is not wrinkled and
you are putting it in correctly. Check that the
original is the right size, not too thick or thin
• Make sure that the ADF is firmly closed.
• The ADF rubber pad may need to be
replaced. See page 13.10.
The original does
not feed into the
machine.
14.14
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Windows problems
Common Linux problems
Condition
“File in Use”
message appears
during installation.
Suggested solutions
Condition
Suggested solutions
Exit all software applications. Remove all
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
• Check if the printer driver is installed in
your system. Open Unified Driver
configurator and switch to the Printers
tab in Printers configuration window to
look at the list of available printers.
Make sure that your machine is
displayed on the list. If not, please,
invoke Add new printer wizard to set up
your device.
• Ensure that the cables are connected
correctly, the machine is on.
• If bi-directional communication is not turned
on in the driver, it will also cause this
message.
“Error Writing to
LPTx” message
appears.
• Check if the printer is started. Open
Printers configuration and select your
machine on the printers list. Look at the
description in the Selected printer pane.
If its status contains “(stopped)” string,
please, press the Start button. After that
normal operation of the printer should
be restored. The “stopped” status might
be activated when some problems in
printing occurred. For instance, this
could be an attempt to print document
when port is claimed by a scanning
application.
“General
Protection Fault”,
“Exception OE”,
“Spool32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
These messages may appear during printing.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
“Fail To Print”, “A
printer timeout
error occurred.”
messages appear.
Incompatibility between the PDF file and the
Acrobat products:
• Check if the port is not busy. Since
functional components of MFP (printer
and scanner) share the same I/O
interface (port), the situation of
The printer does
not print PDF file
correctly. Some
parts of graphics,
text, or illustrations
are missing.
Printing the PDF file as an image may solve
this problem. Turn on Print As Image from the
Acrobat printing options.
The machine does not
print.
simultaneous access of different
“consumer” application to the same port
is possible. To avoid possible conflicts,
only one of them at a time is allowed to
gain control over the device. The other
“consumer” will encounter “device busy”
response. You should open ports
configuration and select the port
assigned to your printer. In the Selected
port pane you can see if the port is
occupied by some other application. If
this is the case, you should wait for
completion of the current job or should
press Release port button, if you are
sure that the present owner is not
functioning properly.
NOTE: It will take longer to print when you print
a PDF file as an image.
Note
• Refer to Microsoft Windows 98/Me/2000/XP User’s Guide that
came with your PC for further information on Windows error
messages.
• Check if your application has special
print option such as “-oraw”. If “-oraw” is
specified in the command line
parameter then remove it to print
properly. For Gimp front-end, select
“print” -> “Setup printer” and edit
command line parameter in the
command item.
14.15
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Suggested solutions
The machine does not
print.
The CUPS (Common Unix Printing
System) version distributed with SuSE
Linux 9.2 (cups-1.1.21) has a problem
with ipp (Internet Printing Protocol)
printing.
• Check if your machine is attached to
your computer. Make sure that it is
connected properly via the USB port
and is turned on.
• Check if the scanner driver for your
machine is installed in your system.
Open Unified Driver configurator, switch
to Scanners configuration, then press
Drivers. Make sure that driver with a
name corresponding to your machine's
name is listed in the window. Check if
the port is not busy. Since functional
components of MFP (printer and
Use the socket printing instead of ipp or
install later version of CUPS (cups-1.1.22
or higher).
Some color images
come out all black.
This is a known bug in Ghostscript (until
GNU Ghostscript version 7.05) when the
base color space of the document is
indexed color space and it is converted
through CIE color space. Because
Postscript uses CIE color space for Color
Matching System, you should upgrade
Ghostscript on your system to at least
GNU Ghostscript version 7.06 or later. You
can find recent Ghostscript versions at
www.ghostscript.com.
scanner) share the same I/O interface
(port), the situation of simultaneous
access of different “consumer”
application to the same port is possible.
To avoid possible conflicts, only one of
them at a time is allowed to gain control
over the device. The other “consumer”
will encounter “device busy” response.
This can usually happen while starting
scan procedure, and appropriate
message box appears.
• To identify the source of the problem,
you should open ports configuration and
select the port assigned to your
scanner. port's symbol /dev/mfp0
corresponds to LP:0 designation
displayed in the scanners’ options, /dev/
mfp1 relates to LP:1 and so on. USB
ports start at /dev/mfp4, so scanner on
USB:0 relates to /dev/mfp4 respectively
and so forth sequentially. In the
The machine does not
appear on the
scanners list.
Some color images
come out in
unexpected color.
This is a known bug in Ghostscript (until
GNU Ghostscript version 7.xx) when the
base color space of the document is
indexed RGB color space and it is
converted through CIE color space.
Because Postscript uses CIE color space
for Color Matching System, you should
upgrade Ghostscript on your system to at
least GNU Ghostscript version 8.xx or
later. You can find recent Ghostscript
versions at www.ghostscript.com.
The machine does not
print whole pages and
its output is half page
printed.
It is a known problem that occurs when a
color printer is used on version 8.51 or
earlier of Ghostscript, 64-bit Linux OS,
and reported to bugs.ghostscript.com as
Ghostscript Bug 688252.
Selected port pane you can see if the
port is occupied by some other
application. If this is the case, you
should wait for completion of the current
job or should press Release port button,
if you are sure that the present port's
owner is not functioning properly.
The problem is solved in AFPL
Ghostscript v. 8.52 or above. Download
the latest version of AFPL Ghostscript
from http://sourceforge.net/projects/
ghostscript/ and install it to solve this
problem.
14.16
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Suggested solutions
Condition
Suggested solutions
Please avoid changing print job
• Check if a document is loaded into the
machine.
• Check if your machine is connected to
the computer. Make sure if it is
connected properly if I/O error is
reported while scanning.
• Check if the port is not busy. Since
functional components of MFP (printer
and scanner) share the same I/O
interface (port), the situation of
simultaneous access of different
“consumer” application to the same port
is possible. To avoid possible conflicts,
only one of them at a time is allowed to
gain control over the device. The other
“consumer” will encounter “device busy”
response. This can usually happen
while starting scan procedure, and
appropriate message box will be
displayed.
parameters (via LPR GUI, for example)
while a print job is in progress. Known
versions of CUPS server break the print
job whenever print options are changed
and then try to restart the job from the
beginning. Since Unified Linux Driver
locks port while printing, the abrupt
termination of the driver keeps the port
locked and therefore unavailable for
subsequent print jobs. If this situation
occurred, please, try to release the port.
I encounter error
“Cannot open port
device file” when
printing a document.
Incompatibility between the PDF file and
the Acrobat products:
The printer does not
print PDF file correctly.
Some parts of
graphics, text, or
illustrations are
missing.
Printing the PDF file as an image may
solve this problem. Turn on Print As
Image from the Acrobat printing options.
NOTE: It will take longer to print when you
print a PDF file as an image.
The machine does not
scan.
To identify the source of the problem,
you should open ports configuration and
select the port assigned to your
scanner. port’s symbol /dev/mfp0
corresponds to LP:0 designation
displayed in the scanners’ options, /dev/
mfp1 relates to LP:1 and so on. USB
ports start at /dev/mfp4, so scanner on
USB:0 relates to /dev/mfp4 respectively
and so forth sequentially. In the
Selected port pane you can see if the
port is occupied by some other
Common Macintosh problems
Condition
Suggested solutions
Incompatibility between the PDF file and
the Acrobat products:
The printer does not print
PDF file correctly. Some
parts of graphics, text, or
illustrations are missing.
Printing the PDF file as an image may
solve this problem. Turn on Print As
Image from the Acrobat printing options.
NOTE: It will take longer to print when
application. If this is the case, you
should wait for completion of the current
job or should press Release port button,
if you are sure that the present port’s
owner is not functioning properly.
you print a PDF file as an image.
The document has
printed, but the print job
has not disappeared from
the spooler in Mac OS
10.3.2.
Update your Mac OS to OS 10.3.3. or
higher.
• Check if Gimp Front-end has
“Xsane: Device dialog.” on the “Acquire”
menu. If not, you should install Xsane
plug-in for Gimp on the your computer.
You can find Xsane plug-in package for
Gimp on Linux distribution CD or Gimp
home page. For the detail information,
refer to the Help for Linux distribution
CD or Gimp Front-end application.
If you wish to use other kind of scan
application, refer to the Help for
application.
Some letters are not
displayed normally
during the Cover page
printing.
This problem is caused because Mac
OS can not create the font during the
Cover page printing. English alphabet
and numbers are displayed normally at
the Cover page.
I cannot scan via Gimp
Front-end.
14.17
<Troubleshooting>
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Toner cartridge life
Memory
Description
15 Specifications
2,000 pages at 5% Coverage
(Shipped with 1,500 pages Starter
toner cartridge)
Black
Color
This chapter includes:
•
•
•
•
b
1,000 pages at 5% coverage
(Shipped with 700 pages Starter
toner cartridge)
128 MB (Non extendable)
External dimension
(W x D x H)
466 x 429 x 486 mm
(18.3 x 16.8 x 19.1 inches)
General specifications
Weight
20.5 Kg (including consumables)
Paper: 3.3 Kg, Plastic: 0.6 Kg
Monthly print: Up to 24,200 images
Item
Description
Package weight
Duty cycle
2
ADF
Up to 50 sheets (20 lb bond, 75 g/m )
Width: 5.6 to 8.5 inches (142 to 216 mm)
Length: 5.8 to 14 inches (148 to 356 mm)
a. Sound Pressure Level, ISO 7779
b. The number of pages may be affected by operating environment, printing inter-
val, media type, and media size.
ADF document size
Paper input capacity
Tray 1: 150 multi-pages for plain paper
2
(20 lb bond, 75 g/m ), 1 page for label, card
stock, transparency, and envelope (16 to
2
Printer specifications
43 lb bond, 60 to 163 g/m )
manual feeder: 1 page for plain paper, label,
card stock, transparency, and envelope (16
Item
Description
Laser Beam Printing
2
to 43 lb bond, 60 to 163 g/m )
Printing method
Optional tray 2: 250 multi pages for plain
2
paper (16 to 24lb bond, 60 to 90 g/m )
Up to 16 ppm in A4
17 ppm in Letter
Black&
White
Paper output
capacity
a
Output tray: 100 sheet (face down)
110 - 127 VAC / 220 - 240 VAC
Printing speed
Up to 4 ppm
Color
in A4 or Letter
Power rating
For the hertz and current, see the Rating
label on the machine.
From ready: Less than 14 seconds
From coldboot: Less than 45 seconds
Black&
White
Average: 350 W
First print out time
Power consumption
From ready: Less than 26 seconds
From coldboot: Less than 57 seconds
Power save mode: Less than 30 W
Color
Standby mode: Less than 35 dBA
Print resolution
Printer language
Up to 2,400 x 600 dpi effective output
Printing: Less than 49 dBA (color printing)
Less than 49 dBA (black and white printing)
a
Noise level
SPL-C (Samsung Printer Language Color)
Copying mode: Less than 52 dBA
Windows 98/Me/2000/XP
Various Linux OS (USB only)
Macintosh 10.3 ~ 10.4
b
Warm-up time
Less than 35 seconds (from sleep mode)
OS Compatibility
o
o
Temperature: 59 F to 90.5 F
Operating
environment
o
o
(10 C to 32.5 C)
High Speed USB 2.0
Interface
Humidity: 20% to 80% RH
Ethernet 10/100 Base TX (Embedded type)
Display
16 characters x 2 lines
a. Print speed will be affected by operating system used, computing performance,
application software, connecting method, media type, media size, and job
complexity.
15.1
<Specifications>
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanner and copier specifications
Facsimile specifications (CLX-3160FN only)
Item
Description
Item
Description
Compatibility
TWAIN standard / WIA standard
Compatibility
ITU-T Group 3
ADF and Flat-bed Color CCD (Charge
Coupled Device) module
Public Switched Telephone Network (PSTN)
or behind PABX
Scanning method
Resolution
Applicable line
Optical: 600 x 1,200 dpi (mono and color)
Enhanced: 4,800 x 4,800 dpi
Data coding
MH/MR/MMR/JBIG/JPEG
33.6 Kbps
Modem speed
Scanner glass: 11.7 inches (297 mm)
ADF: 14 inches (356 mm)
Effective scanning
length
Transmission
speed
a
Approx. 3 seconds/page
Effective scanning
width
Scanner glass: 11.7 inches (297 mm)
Max 8.2 inches (208 mm)
24 bit
Maximum
document length
Automatic document glass: 14 inches
(356 mm)
Color bit depth
Mono bit depth
Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
1 bit for Linearity & Haftone
8 bit for Gray mode
Resolution
Super Fine: 300 x 300 dpi
Photo: 203 x 196 dpi
Color: 200 x 200 dpi
Black & Up to 16 ppm in A4 (17 ppm in
a
white
Letter)
Copy speed
Color
Up to 4 cpm in A4 or Letter
Memory
Halftone
4 MB
Scan: up to 600 x 300 (text, text/photo)
up to 600 x 600 (photo using platen)
up to 600 x 300 (photo using ADF)
Print: up to 600 x 600 (text, text/photo)
up to 1200 x 1200 (photo using platen)
up to 600 x 600 (photo using ADF)
256 levels
Copy resolution
Zoom rate
Speed buttons (up to 30 numbers)
Speed dialing (up to 240 numbers)
Auto dialer
a. Transmission time applies to memory transmission of text data with ECM com-
pression using only ITU-T No.1 Chart.
Scanner glass: 25 to 400%
ADF: 25 to 100%
Multiple copies
Grayscale
1 to 99 pages
256 levels
a. Copy Speed is based on Single Document Multiple Copy.
15.2
<Specifications>
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
paper 14.2
Numerics
D
K
DRPD (Distinctive Ring Pattern Detection)
A
accessories
Address Book
L
ADF 1.2
loading originals
ADF 5.1
loading paper
E
F
faxing
M
B
C
cleaning
N
inside 13.2
outside 13.2
network scan
scanning 8.3
copying
Network Scan program
problems 14.14
G
network setup
TCP/IP 4.1
2/4-up 6.3
collation 6.2
poster 6.4
n-up (multiple pages per sheet)
copying 6.3
I
J
O
originals
jam, clear
document 14.1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
loading 5.1
manually 9.3
replacing
ringer 2.3
U
USB flash memory
managing 11.3
printing 11.2
P
paper jam, clear
scanning 11.2
V
volume, adjust
ringer 2.3
S
paper load
speaker 2.3
paper size
setting 5.9
specifications 5.3
paper tray, set
copy 6.1
fax 9.3
paper type
scanner glass
cleaning 13.4
scanning
W
waste toner container
replace 13.9
setting 5.9
sending a fax
specifications 5.3
printing
automatically 9.2
manually 9.2
reports 13.1
problem, solve
specifications
copying 14.12
faxing 14.14
facsimile 15.2
Linux 14.15
general 15.1
Macintosh 14.17
printing 14.9
scanning 14.13
Windows 14.15
paper 5.3
printer 15.1
supplies
system requirements
Macintosh 3.2
R
receiving a fax
T
toner cartridge
redialing
maintaining 13.4
redistributing 13.4
replacing 13.5
automatically 9.3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung Printer
Software section
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION
CONTENTS
Installing Printer Software ........................................................................................................ 4
Installing Software for Local Printing ................................................................................. 4
Installing Software for Network Printing ............................................................................. 7
Reinstalling Printer Software ................................................................................................... 10
Removing Printer Software ..................................................................................................... 11
Printing a Document .............................................................................................................. 12
Printing to a file (PRN) .......................................................................................................... 12
Printer Settings ..................................................................................................................... 13
Layout Tab .................................................................................................................. 13
Paper Tab .................................................................................................................... 14
Graphics Tab ............................................................................................................... 15
Extras Tab ................................................................................................................... 16
About Tab ................................................................................................................... 16
Printer Tab .................................................................................................................. 16
Using a Favorite Setting ................................................................................................ 17
Using Help ................................................................................................................... 17
Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 18
Printing Posters ..................................................................................................................... 19
Printing Booklets .................................................................................................................. 19
Printing on Both Sides of Paper ............................................................................................... 20
Printing a Reduced or Enlarged Document ................................................................................ 20
Fitting Your Document to a Selected Paper Size ......................................................................... 20
Using Watermarks ................................................................................................................. 21
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an Existing Watermark ......................................................................................... 21
Creating a Watermark ................................................................................................... 21
Editing a Watermark ..................................................................................................... 21
Deleting a Watermark ................................................................................................... 21
Using Overlays ...................................................................................................................... 22
What is an Overlay? ...................................................................................................... 22
Creating a New Page Overlay ......................................................................................... 22
Using a Page Overlay .................................................................................................... 22
Deleting a Page Overlay ................................................................................................ 22
Setting Up a Host Computer ................................................................................................... 23
Setting Up a Client Computer .................................................................................................. 23
Understanding Smart Panel .................................................................................................... 24
Opening the Troubleshooting Guide ......................................................................................... 25
Using Printer Settings Utility ................................................................................................... 25
Using Onscreen Help File ............................................................................................... 25
Changing the Smart Panel Program Settings ............................................................................. 25
Scanning Using Samsung SmarThru ......................................................................................... 26
Uninstalling Samsung SmarThru ..................................................................................... 26
Using Samsung SmarThru ............................................................................................. 27
Using Onscreen Help File ............................................................................................... 28
Scanning Process with TWAIN-enabled Software ........................................................................ 28
Scanning Using the WIA Driver ................................................................................................ 28
Getting Started ..................................................................................................................... 29
Installing the Unified Linux Driver ............................................................................................ 29
Installing the Unified Linux Driver ................................................................................... 29
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling the Unified Linux Driver ............................................................................... 30
Using the Unified Driver Configurator ....................................................................................... 31
Opening the Unified Driver Configurator .......................................................................... 31
Printers Configuration ................................................................................................... 31
Scanners Configuration ................................................................................................. 32
Ports Configuration ....................................................................................................... 32
Configuring Printer Properties ................................................................................................. 33
Printing a Document .............................................................................................................. 33
Printing from Applications .............................................................................................. 33
Printing Files ................................................................................................................ 34
Scanning a Document ............................................................................................................ 34
Using the Image Manager .............................................................................................. 35
Installing Software for Macintosh ............................................................................................. 37
Setting Up the Printer ............................................................................................................ 38
For a Network-connected Macintosh ................................................................................ 38
For a USB-connected Macintosh ..................................................................................... 38
Printing ................................................................................................................................ 39
Printing a Document ..................................................................................................... 39
Changing Printer Settings .............................................................................................. 39
Printing Multiple Pages on One Sheet of Paper .................................................................. 40
Scanning .............................................................................................................................. 41
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Typical Installation
1
Installing Printer
Software in Windows
This is recommended for most users. All components necessary
for printer operations will be installed.
1
2
Make sure that the printer is connected to your computer
and powered on.
This chapter includes:
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
Installing Printer Software
You can install the printer software for local printing or network
printing. To install the printer software on the computer,
perform the appropriate installation procedure depending on
the printer in use.
A printer driver is software that lets your computer
communicate with your printer. The procedure to install drivers
may differ depending on the operating system you are using.
All applications should be closed on your PC before beginning
installation.
Installing Software for Local Printing
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
A local printer is a printer directly attached to your computer
using the printer cable supplied with your printer, such as a USB
or parallel cable. If your printer is attached to a network, skip
this step and go to “Installing Software for Network Printing” on
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
You can install the printer software using the typical or custom
method.
Select Typical installation for a local printer. Click
Next
.
NOTE: If the “New Hardware Wizard” window appears during
the installation procedure, click
in the upper right corner of
the box to close the window, or click Cancel
.
4
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
7
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
Otherwise, just click Finish
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
NOTE: After setup is complete, if your printer driver doesn’t
Custom Installation
5
6
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
You can choose individual components to install.
page, select the checkbox and click Next
.
1
2
Make sure that the printer is connected to your computer
and powered on.
Insert the supplied CD-ROM into your CD-ROM drive.
If the test page prints out correctly, click Yes
.
The CD-ROM should automatically run, and an installation
window appears.
If not, click No to reprint it.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
5
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Select Custom installation. Click Next
.
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5
Select your printer and click Next.
6
Select the components to be installed and click Next.
NOTE: You can change the desired installation folder by
clicking [Browse].
7
8
After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click Next
.
If the test page prints out correctly, click Yes
.
If not, click No to reprint it.
6
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
9
To register yourself as a user of Samsung Printers in order
to receive information from Samsung, select the checkbox
and click Finish. You are now sent to the Samsung web
site.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “ ” with the
letter which represents your drive and click OK
X
.
Otherwise, just click Finish
.
3
4
Click Next
.
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
Installing Software for Network
Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
Select Typical installation for a network printer. Click
Next
.
You can install the printer software using the typical or custom
method.
Typical Installation
This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
7
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
NOTE: After setup is complete, if your printer driver doesn’t
click Next
.
Custom Installation
You can choose individual components to install and set a
specific IP address.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer’s User’s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
then Run. Type X:\Setup.exe, replacing “X” with the
letter which represents your drive and click OK
.
To verify your printer’s IP address or the MAC address,
print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
NOTE: To search the network printer, the firewall should be
disabled.
6
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
3
Click Next
.
• If necessary, select a language from the drop-down list.
•
View User’s Guide: Allows you to view the User’s
Guide. If your computer doesn’t have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
checkbox(es) and click Finish
.
Otherwise, just click Finish
.
8
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Custom installation. Click Next.
TIP: If you want to set a specific IP address on a specific
network printer, click the Set IP Address button. The Set IP
Address window appears. Do as follows:
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next
.
a. Select a printer to be set with a specific IP address from the
list.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click Configure to set the specific IP
address for the network printer.
c. Click Next
.
6
Select the components to be installed. After selecting the
components, the following window appears. You can also
change the printer name, set the printer to be shared on
the network, set the printer as the default printer, and
change the port name of each printer. Click Next
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To verify your printer’s IP address or the MAC address,
print a Network Configuration page.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
To install this software on a server, select the Setting up
this printer on a server checkbox.
NOTE: To search the network printer, the firewall should be
disabled.
7
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
checkbox(es) and click Finish
.
9
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Otherwise, just click Finish
.
network, enter the port name and the IP address for the
printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
You will see a component list so that you can reinstall any
item individually.
NOTE: If your printer is not already connected to the
computer, the following window will appear.
NOTE: After setup is complete, if your printer driver doesn’t
Reinstalling Printer Software
• After connecting the printer, click Next
.
• If you don’t want to connect the printer at this time, click
Next, and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The reinstallation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
You can reinstall the software if installation fails.
1
2
Start Windows.
From the Start menu select Programs or All Programs
→
your printer driver name
→
Maintenance.
3
4
Select Repair and click Next
.
The list of printers available on the network appears.
Select the printer you want to install from the list and then
5
Select the components you want to reinstall and click
Next
click Next
.
.
If you installed the printer software for local printing
and you select your printer driver name, the window
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click
Next
.
b. If the test page prints out correctly, click Yes
.
If it doesn’t, click No to reprint it.
6
When the reinstallation is done, click Finish
.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
10
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Printer Software
1
2
Start Windows.
From the Start menu select Programs or All Programs
→
your printer driver name
→
Maintenance.
3
Select Remove and click Next
.
You will see a component list so that you can remove any
item individually.
4
5
Select the components you want to remove and then click
Next
When your computer asks you to confirm your selection,
click Yes
.
.
The selected driver and all of its components are removed
from your computer.
6
After the software is removed, click Finish.
11
Installing Printer Software in Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Open the document you want to print.
Select Print from the File menu. The Print window is
displayed. It may look slightly different depending on your
application.
2
Basic Printing
This chapter explains the printing options and common printing
tasks in Windows.
The basic print settings are selected within the Print
window. These settings include the number of copies and
print range.
This chapter includes:
Make sure that your
printer is selected.
3
4
Select your printer driver from the Name drop-down
list.
To take advantage of the printer features provided by your
printer driver, click Properties or Preferences in the
application’s Print window. For details, see “Printer
Printing a Document
NOTES
:
If you see Setup Printer, or Options in your Print
,
window, click it instead. Then click Properties on the next
screen.
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User’s
Guide.
Click OK to close the printer properties window.
To start the print job, click OK or Print in the Print
window.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
Printing to a file (PRN)
The following procedure describes the general steps required
for printing from various Windows applications. The exact steps
for printing a document may vary depending on the application
program you are using. Refer to the User’s Guide of your
software application for the exact printing procedure.
You will sometimes need to save the print data as a file for your
purpose.
To create a file:
1
2
Check the Print to file box at the Print window.
Select the folder and assign a name of the file and then
click OK.
12
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout Tab
The Layout tab provides options to adjust how the document
appears on the printed page. The Layout Options includes
Printer Settings
Multiple Pages per Side Poster Printing and Booklet
information on accessing printer properties.
,
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows 98.
Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your
page 16).
NOTES
:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in
the software application first, and change any remaining
settings using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
Paper Orientation
Paper Orientation allows you to select the direction in which
information is printed on a page.
1. Click the Windows Start button.
•
Portrait prints across the width of the page, letter style.
2. Select Printers and Faxes
.
•
Landscape prints across the length of the page, spreadsheet
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
style.
•
Rotate 180 Degrees allows you to rotate the page, 180
Printing Preferences
.
degrees.
5. Change the settings on each tab, click OK.
Landscape
Portrait
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side Poster Printing and
Booklet Printing
,
.
•
For details, see “Printing Multiple Pages on One Sheet of Paper
•
•
For details, see “Printing Posters” on page 19.
For details, see “Printing Booklets” on page 19.
Double-sided Printing
Double-sided Printing allows you to print on both sides of
paper. If this option does not appear, your printer does
not have this feature.
•
13
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Source
Paper Tab
Make sure that Source is set to the corresponding paper tray.
Use Manual Feeder when printing on special materials like
envelopes and transparencies. You have to load one sheet at a
time into the Manual Tray or Multi-Purpose Tray.
If the paper source is set to Auto Selection, the printer
automatically picks up print material in the following tray order:
Manual Tray or Multi-Purpose Tray, Tray n.
Use the following options to set the basic paper handling
specifications when you access the printer properties. See
“Printing a Document” on page 12 for more information on
accessing printer properties.
Click the Paper tab to access various paper properties.
Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If not, print quality may not be acheived as you want.
Thin: Less than 19 lb (70 g/m2) thin paper.
Thick: 24 lb to 32 ib (90~ 120 g/m2) thick paper.
Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert
25 % and Gilbert 100 %.
Plain Paper: Normal plain paper. Select this type if your printer
is monochrome and printing on the 16 lb (60 g/m2) cotton paper.
Recycled Paper: 20 lb to 24 lb (75~90 g/m2) recycled paper.
Color Paper: 20 lb to 24 lb (75~90 g/m2) color-backgrounded
paper.
First Page
This property allows you to print the first page using a different
paper type from the rest of the document. You can select the
paper source for the first page.
For example, load thick stock for the first page into the Multi-
purpose Tray, and plain paper into Tray n. Then, select Tray n in
the Source option and Multi-Purpose Tray in the First Page
option.
Copies
Copies allows you to choose the number of copies to be printed.
You can select 1 to 999 copies.
Size
Size allows you to set the size of paper you loaded in the tray.
If the required size is not listed in the Size box, click Custom
.
Scaling Printing
When the Custom Paper Setting window appears, set the paper
size and click OK. The setting appears in the list so that you can
select it.
Scaling Printing allows you to automatically or manually scale
your print job on a page. You can choose from None
Enlarge, and Fit to Page
,
Reduce/
.
•
For details, see “Printing a Reduced or Enlarged Document” on
•
For details, see “Fitting Your Document to a Selected Paper
14
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Options
Graphics Tab
Use the following Graphic options to adjust the print quality for
your specific printing needs. See “Printing a Document” on
page 12 for more information on accessing printer properties.
You can set advanced settings by clicking the Advanced
Options button.
•
TrueType Options: This option determines what the driver
tells the printer about how to image the text in your document.
Select the appropriate setting according to the status of your
document. This option may be available only in
Windows 9x/Me, depending on your particular printer
model.
Click the Graphic tab to display the properties shown below..
-
Download as Bitmap: When this option is selected, the
driver will download the font data as bitmap images.
Documents with complicated fonts, such as Korean or
Chinese, or various other fonts, will print faster in this setting.
-
Print as Graphics: When this option is selected, the driver
will download any fonts as graphics. When printing documents
with high graphic content and relatively few TrueType fonts,
printing performance (speed) may be enhanced in this
setting.
•
•
Print All Text To Black: When the Print All Text To Black
option is checked, all text in your document prints solid black,
regardless of the color it appears on the screen.
Print All Text To Darken: When the Print All Text To Darken
option is checked, all text in your document is allowed to print
darker than on a normal document. Some printers do not
support this feature.
Quality
The Resolution options you can select may vary
depending on your printer model. The higher the setting,
the sharper the clarity of printed characters and graphics. The
higher setting also may increase the time it takes to print a
document.
Color Mode
You can choose color options. Setting to Color typically produces
the best possible print quality for color documents. If you want to
print a color document in grayscale, select Grayscale. If you
want to adjust the color options manually, select Manual and
click the Color Adjust or Color Matching button.
•
Color Adjust : You can adjust the appearance of images by
changing the settings in the Levels option.
•
Color Matching : You can adjust the appearance of images by
changing the settings in the Settings option.
15
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Extras Tab
About Tab
You can select output options for your document. See “Printing
a Document” on page 12 for more information about accessing
the printer properties.
Use the About tab to display the copyright notice and the
version number of the driver. If you have an Internet browser,
you can connect to the Internet by clicking on the web site icon.
See “Printing a Document” on page 12 for more information
about accessing printer properties.
Click the Extras tab to access the following feature:
Printer Tab
If you access printer properties through the Printers folder,
you can view the Printer tab. You can set the printer
configuration.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
1
2
3
4
Click the Windows Start menu.
Select Printers and Faxes
.
Select your printer driver icon.
Right-click on the printer driver icon and select
Properties
.
5
Click the Printer tab and set the options.
Watermark
You can create a background text image to be printed on each
Overlay
Overlays are often used to take the place of preprinted forms and
Output Options
•
Print Subset: You can set the sequence in which the pages
print. Select the print order from the drop-down list.
-
-
-
-
Normal (1,2,3): Your printer prints all pages from the first
page to the last page.
Reverse All Pages (3,2,1): Your printer prints all pages
from the last page to the first page.
Print Odd Pages: Your printer prints only the odd
numbered pages of the document.
Print Even Pages: Your printer prints only the even
numbered pages of the document.
16
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Favorite Setting
The Favorites option, which is visible on each properties tab,
allows you to save the current properties settings for future
use.
To save a Favorites item:
1
2
Change the settings as needed on each tab.
Enter a name for the item in the Favorites input box.
3
Click Save.
When you save Favorites, all current driver settings are
saved.
To use a saved setting, select the item from the Favorites drop
down list. The printer is now set to print according to the
Favorites setting you selected.
To delete a Favorites item, select it from the list and click
Delete
.
You can also restore the printer driver’s default settings by
selecting Printer Default from the list.
Using Help
Your printer has a help screen that can be activated by clicking
the Help button in the printer properties window. These help
screens give detailed information about the printer features
provided by the printer driver.
You can also click
from the upper right corner of the
window, and then click on any setting.
17
Basic Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Advanced Printing
This chapter explains printing options and advanced printing
tasks.
Printing Multiple Pages on One
Sheet of Paper (N-Up Printing)
You can select the number of pages to print on a single sheet
of paper. To print more than one page per sheet, the pages will
be reduced in size and arranged in the order you specify. You
can print up to 16 pages on one sheet.
1
3
2
4
NOTE
:
• Your printer driver Properties window that appears in this
User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
3
From the Layout tab, choose Multiple Pages per Side in
the Layout Type drop-down list.
Select the number of pages you want to print per sheet
(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down
list.
This chapter includes:
4
Select the page order from the Page Order drop-down
list, if necessary.
Check Print Page Border to print a border around each
page on the sheet.
Click the Paper tab, select the paper source, size, and
type.
5
6
Click OK and print the document.
18
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Posters
Printing Booklets
This feature allows you to print a single-page document onto 4,
9, or 16 sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
9
9
8
8
1
To change the print settings from your software
application, access printer properties. See “Printing a
This printer feature allows you to print your document on both
sides of the paper and arranges the pages so that the paper can
be folded in half after printing to produce a booklet.
2
3
Click the Layout tab, select Poster Printing in the
Layout Type drop-down list.
Configure the poster option:
1
To change the print settings from your software
application, access the printer properties. See “Printing a
You can select the page layout from Poster<2x2>
,
Poster<3x3>, or Poster<4x4>. If you select
Poster<2x2>, the output will be automatically stretched
to cover 4 physical pages.
2
From the Layout tab, choose Booklet Printing from the
Type drop-down list.
NOTE: The booklet printing option is available when A4,
Letter, Legal, or Folio size is selected in the Size option on the
Paper tab.
3
Click the Paper tab, and select the paper source, size, and
type.
4
5
Click OK and print the document.
Specify an overlap in millimeters or inches to make it
easier to pasting the sheets together.
After printing, fold and staple the pages.
0.15 inches
0.15 inches
4
5
Click the Paper tab, select the paper source, size, and
type.
Click OK and print the document. You can complete the
poster by pasting the sheets together.
19
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing on Both Sides of Paper
Printing a Reduced or Enlarged
Document
You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
You can change the size of a page’s content to appear larger or
smaller on the printed page.
The options are:
•
•
None
1
To change the print settings from your software
application, access printer properties. See “Printing a
Long Edge, which is the conventional layout used in
book binding.
•
Short Edge, which is the type often used with calendars.
2
3
From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
Enter the scaling rate in the Percentage input box.
2
2
You can also click the
or
button.
3
4
5
Select the paper source, size, and type in Paper Options.
2
5
3
3
2
5
5
3
Click OK and print the document.
5
▲
Long Edge
▲
Short Edge
NOTE
:
Fitting Your Document to a
Selected Paper Size
• Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to
the printer may result.
• To use double-sided printing, you can use only the following
paper sizes: A4, Letter, Legal, and Folio, with a weight of
20~24 lbs (75~90 g/m²).
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
A
1
To change the print settings from your software
application, access printer properties. “Printing a
1
To change the print settings from your software
application, access printer properties. See “Printing a
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
Select the correct size from the Output size drop-down
list.
Select the paper source, size, and type in Paper Options.
2
3
From the Layout tab, select the paper orientation.
2
3
From the Double-sided Printing section, select the
binding option you want.
Click the Paper tab and select the paper source, size, and
type.
4
5
4
5
Click OK and print the document.
Click OK and print the document.
NOTE: If your printer does not have a duplex unit, you should
complete the printing job manually. The printer prints every
other page of the document first. After printing the first side of
your job, the Printing Tip window appears. Follow the on-
screen instructions to complete the printing job.
20
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a Watermark
Using Watermarks
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab and click the Edit button in the
Watermark section. The Edit Watermarks window
appears.
Select the watermark you want to edit from the Current
Watermarks list and change the watermark message and
options.
The Watermark option allows you to print text over an existing
document. For example, you may want to have large gray
letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally
across the first page or all pages of a document.
There are several predefined watermarks that come with the
printer, and they can be modified, or you can add new ones to
the list.
4
5
Click Update to save the changes.
Click OK until you exit the Print window.
Using an Existing Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab, and select the desired watermark
from the Watermark drop-down list. You will see the
selected watermark in the preview image.
Deleting a Watermark
1
To change the print settings from your software
application, access printer properties. See “Printing a
2
From the Extras tab, click the Edit button in the
Watermark section. The Edit Watermarks window
appears.
Click OK and start printing.
NOTE: The preview image shows how the page will look when
it is printed.
3
4
Select the watermark you want to delete from the Current
Watermarks list and click Delete
Click OK until you exit the Print window.
.
Creating a Watermark
1
2
3
To change the print settings from your software
application, access printer properties. See “Printing a
Click the Extras tab, and click the Edit button in the
Watermark section. The Edit Watermarks window
appears.
Enter a text message in the Watermark Message box.
You can enter up to 40 characters. The message displays
in the preview window.
When the First Page Only box is checked, the watermark
prints on the first page only.
4
Select watermark options.
You can select the font name, style, size, or grayscale
level from the Font Attributes section and set the angle
of the watermark from the Message Angle section.
5
6
Click Add to add a new watermark to the list.
When you have finished editing, click OK and start
printing.
To stop printing the watermark, select (No Watermark) from
the Watermark drop-down list.
21
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Page Overlay
After an overlay has been created, it is ready to be printed with
your document. To print an overlay with a document:
Using Overlays
1
2
Create or open the document you want to print.
What is an Overlay?
To change the print settings from your software
application, access printer properties. See “Printing a
An overlay is text and/or images stored in the computer hard
disk drive (HDD) as a special file format that can be printed on
any document. Overlays are often used to take the place of
preprinted forms and letterhead paper. Rather than using
preprinted letterhead, you can create an overlay containing the
exact same information that is currently on your letterhead. To
print a letter with your company’s letterhead, you do not need
to load preprinted letterhead paper in the printer. You need only
tell the printer to print the letterhead overlay on your
document.
Dear ABC
3
4
Click the Extras tab.
Select the desired overlay from the Overlay drop-down
list box.
If the overlay file you want does not appear in the
Overlay list, click Edit button and Load Overlay, and
select the overlay file.
Regards
WORLD BEST
5
If you have stored the overlay file you want to use in an
external source, you can also load the file when you access
the Load Overlay window.
Creating a New Page Overlay
To use a page overlay, you must create a new page overlay
containing your logo or image.
After you select the file, click Open. The file appears in the
Overlay List box and is available for printing. Select the
overlay from the Overlay List box.
6
7
If necessary, click Confirm Page Overlay When
Printing. If this box is checked, a message window
appears each time you submit a document for printing,
asking you to confirm your wish to print an overlay on
your document.
1
Create or open a document containing text or an image for
use in a new page overlay. Position the items exactly as
you wish them to appear when printed as an overlay.
To save the document as an overlay, access printer
properties. See “Printing a Document” on page 12.
Click the Extras tab, and click Edit button in the Overlay
section.
WORLD BEST
2
3
If this box is not checked and an overlay has been
selected, the overlay automatically prints with your
document.
4
5
In the Edit Overlay window, click Create Overlay.
Click OK or Yes until printing begins.
In the Create Overlay window, type a name of up to eight
characters in the File name box. Select the destination
path, if necessary. (The default is C:\Formover).
The selected overlay downloads with your print job and
prints on your document.
6
7
Click Save. The name appears on the Overlay List box.
NOTE: The resolution of the overlay document must be the
same as that of the document you will print with the overlay.
Click OK or Yes to finish creating.
The file is not printed. Instead it is stored on your
computer hard disk drive.
Deleting a Page Overlay
You can delete page overlays that you no longer use.
NOTE: The overlay document size must be the same as the
documents you print with the overlay. Do not create an
overlay with a watermark.
1
2
3
In the printer properties window, click the Extras tab.
Click the Edit button in the Overlay section.
Select the overlay you want to delete from the Overlay
List box.
4
5
6
Click Delete Overlay.
When a confirming message window appears, click Yes
.
Click OK until you exit the Print window.
22
Advanced Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Sharing the Printer
Locally
You can connect the printer directly to a selected computer,
which is called “host computer,” on the network.
Setting Up a Host Computer
1
2
3
4
5
6
Start Windows.
From the Start menu select Printers and Faxes
.
Double-click your printer driver icon
.
From the Printer menu, select Sharing
.
The following procedure is for Windows XP. For other Windows
OS, refer to the corresponding Windows User's Guide or online
help.
Check the Share this printer box.
Fill in the Shared Name field, and then click OK
.
NOTES
:
• Check the Operating System(s) that are compatible with
your printer. Please refer to the OS Compatibility section of
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
Setting Up a Client Computer
1
2
3
4
5
6
7
8
9
Right-click the Windows Start button and select Explorer
Open your network folder in the left column.
Click the shared name.
.
From the Start menu select Printers and Faxes
Double-click your printer driver icon
From the Printer menu, select Properties
From the Ports tab, click Add Port
Select Local Port and click New Port
Fill in the Enter a port name field with the shared name.
.
.
.
.
.
10Click OK and click Close.
11Click Apply and click OK.
23
Sharing the Printer Locally
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are a Windows user, from the Start menu, select
Programs or All Programs your printer driver name
→
→
5
Using Smart Panel
Smart Panel is a program that monitors and informs you of the
status of the printer, and allows you to customize the printer’s
settings. Smart Panel is installed automatically when you
install the printer software.
Smart Panel
.
NOTES:
• If you have already installed more than one Samsung
printer, first select the printer model you want in order to
use the corresponding Smart Panel. Right-click (in Windows
or Linux) or click (in Mac OS X) the Smart Panel icon and
select your printer name
.
NOTES:
• The Smart Panel window and its contents shown in this
Software User’s Guide may differ depending on the printer
or Operating System in use.
• To use this program, you need:
- Windows 98 or higher To check for Operating System(s)
that are compatible with your printer, refer to Printer
Specifications in your Printer User’s Guide.
The Smart Panel program displays the current status of the
printer, the level of toner remaining in the toner cartridge(s)
and various other information. You can also change settings.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with
your printer, refer to Printer Specifications in your Printer
User’s Guide.
- Internet Explorer version 5.0 or higher for flash animation
in HTML Help.(Only for Windows)
2
• If you need to know the exact name of your printer, you can
check the supplied CD-ROM.
3
4
1
5
Understanding Smart Panel
If an error occurs while printing, Smart Panel appears
automatically, showing the error.
1
Toner Level
You can view the level of toner remaining in the toner
cartridge(s). The printer and the number of toner cartridge(s)
shown in the above window may differ depending on the printer in
use. Any printers do not have this feature.
You can also launch Smart Panel manually. Double-click the
Smart Panel icon on the Windows task bar (in Windows), or
Notification Area (in Linux). You can also click it on the status
bar (in Mac OS X).
2
Buy Now
You can order replacement toner cartridge(s) online.
Double-click this icon in Windows.
3
Troubleshooting Guide
You can view Help to solve problems.
4
Printer Setting
You can configure various printer settings in the Printer Settings
Utility window. Any printers do not have this feature.
Click this icon in Mac OS X.
NOTE: If your printer is connected to a network and you are a
Windows user, the SyncThru Web Service window appears
instead of the Printer Settings Utility window. Mac OS X and
Linux do not support network environments.
Click this icon in Linux.
24
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Driver Setting (Only for Windows)
You can use the printer properties window, which allows you to
access all of the printer options you need for using your
Changing the Smart Panel
Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Options
.
The following window opens.
Opening the Troubleshooting
Guide
Using the troubleshooting guide, you can view solutions for
error status problems.
Right-click (in Windows or Linux) or click (in Mac OS X) the
Smart Panel icon and select Troubleshooting Guide
.
Using Printer Settings Utility
Using the Printer Settings Utility, you can configure and check
print settings.
1
Right-click (in Windows or Linux) or click (in Mac OS X) the
•
Display when job is finished for network printer: The
Smart Panel icon and select Printer Setting
.
computer shows the Smart Panel popup window or
balloon when your job is complete in Windows. (Only for
Windows network-supported printers.)
2
3
Change the settings.
To send the changes to the printer, click the Apply button.
•
•
Display when error occurs during printing: The
computer shows the Smart Panel popup window or
balloon when an error occurs during printing.
NOTES: If your printer is connected to a network, the
SyncThru Web Service window appears instead of the
Printer Settings Utility window.
Display with: You can select how the computer shows
you a message. If you select Popup window (smart
panel), the message appears in the Smart Panel popup
window in Windows and Mac OS X.
Using Onscreen Help File
For more information about Printer Settings Utility, click
•
•
Launch Job Monitor when the job is saved in the
printer: If you store print jobs on the printer’s hard disk,
the computer opens the Job Monitor window in Windows.
(Only for Windows network-supported printers with
built-in hard disks.)
.
Schedule an automatic status checking every: The
computer updates the printer status regularly. Setting
the value close to 1 second causes the computer to check
the printer status more frequently, thereby allowing a
faster response to any printer error.
25
Using Smart Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Scanning
Scanning with your machine lets you turn pictures and text into
digital files on your computer. Then you can fax or e-mail the
files, display them on your web site or use them to create
projects that you can print using Samsung SmarThru software
or the WIA driver.
Scanning Using Samsung
SmarThru
Samsung SmarThru is the accompanying software for your
machine. With SmarThru, scanning is the proverbial piece of
cake.
This chapter includes:
NOTE: You can use SmarThru 4 in Windows 98 or higher.
Uninstalling Samsung SmarThru
NOTES
:
NOTE: Before beginning uninstallation, ensure that all
applications are closed on your computer.
• Check the Operating System(s) that are compatible
with your printer. Please refer to the OS Compatibility
section of Printer Specifications in your Printer User’s
Guide.
• You can check your printer name in the supplied CD-
ROM.
1
2
From the Start menu, select Programs
.
Select SmarThru 4, and then select Uninstall SmarThru
4.
• The maximum resolution that can be achieved
depends upon various factors, including computer
speed, available disk space, memory, the size of the
image being scanned, and bit depth settings. Thus,
depending on your system and what you are scanning,
you may not be able to scan at certain resolutions,
especially using enhanced dpi.
3
4
When your computer asks you to confirm, click OK
.
Click Finish
.
You may be prompted to restart your computer. In this
case you must shut the computer down and then restart it
before the changes will be saved.
26
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Click Scan To. The Scan To menu bar appears on the
SmarThru 4 window.
Using Samsung SmarThru
Follow these steps to start scanning using the SmarThru:
1
2
3
Make sure that your machine and computer are turned on
and properly connected to each other.
Place your photograph or page on the document glass
or ADF.
Scan To
menu bar
Once you have installed Samsung SmarThru, you will see
the SmarThru 4 icon on your desktop. Double-click the
SmarThru 4 icon.
Adjust the
scan settings.
Double-click this icon.
Click to start
scanning.
The SmarThru 4 window opens.
Scan To lets you use the following services:
•Application
Make sure that your
printer is selected.
Scanning an image and placing it in an image editor
application, such as Paint or Adobe Photoshop.
•E-mail
Scanning an image and emailing it. Allows you to scan an
image, preview it, and email it.
•Scan To
NOTE: To send an image by e-mail, you must have a mail
client program, like Outlook Express, which has been set up
with your e-mail account.
Allows you to scan an image and save it to an application
or folder, email it, or publish it on a web site.
•Image
Allows you to edit an image you have saved as a graphic
file and send it to a selected application or folder, email it,
or publish it on a web site.
•Folder
Scanning an image and saving it to a folder. Allows you to
scan an image, preview it, and save it to the folder of your
choice.
•Copy
Allows you to produce professional quality copies. You can
make black and white or color copies of an image if your
machine supports it, and customize the copy settings.
•OCR
Scanning an image and performing text recognition.
Allows you to scan an image, preview it, and send it to the
OCR program for text recognition.
•Print
Allows you to print images you have saved. You can print
images in black and white or color mode if your machine
supports it.
- Recommended Scan Option for OCR
- Resolution: 200 or 300 dpi
- Image Type: Grayscale or Black & White
•Fax
•Web
Allows you to fax images or files you have saved on your
computer. This is available when your machine supports
the fax feature.
Scanning an image, previewing it, and publishing it on a
web site, using the specified file format for the image you
want to publish.
27
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
•Settings
Customizing settings of Scan To basic functions. Allows
Scanning Using the WIA Driver
you to customize settings for Application E-mail, OCR,
,
and Web functions.
Your machine also supports the Windows Image Acquisition
(WIA) driver for scanning images. WIA is one of the standard
components provided by Microsoft Windows XP and works
with digital cameras and scanners. Unlike the TWAIN driver,
the WIA driver allows you to scan and easily manipulate images
without using additional software.
5
6
Click the service icon according to your job.
SmarThru 4 opens for the selected service. Adjust the
scan settings.
7
To start scanning, click Scan.
NOTE: The WIA driver works only on Windows XP with USB
port.
NOTE: If you want to cancel the scan job, click Cancel
.
1
2
Load the document(s) face up into the ADF.
OR
Using Onscreen Help File
For more information about SmarThru, click
corner of the window. The SmarThru Help window opens and
allows you to view onscreen help supplied on the SmarThru
program.
Place a single document face down on the document
glass.
From the Start menu on your desktop window, select
at the top right
Settings
,
Control Panel, and then Scanners and
Cameras
.
3
4
Double click your scanner driver icon. The Scanner and
Camera Wizard launches.
Choose your scanning preferences and click Preview to
see how your preferences affect the picture.
Scanning Process with TWAIN-
enabled Software
5
6
Click Next.
Enter a picture name, and select a file format and
destination to save the picture.
If you want to scan documents using other software, you will
need to use TWAIN-compliant software, such as Adobe
PhotoDeluxe or Adobe Photoshop. The first time you scan with
your machine, select it as your TWAIN source in the application
you use.
7
Follow the on-screen instructions to edit the picture after it
is copied to your computer.
NOTE: If you want to cancel the scan job, press the Cancel
button on the Scanner and Camera Wizard.
The basic scanning process involves a number of steps:
1
2
Make sure that your machine and computer are turned on
and properly connected to each other.
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document
glass.
3
4
5
Open an application, such as PhotoDeluxe or Photoshop.
Open the TWAIN window and set the scan options.
Scan and save your scanned image.
NOTE: You need to follow the program’s instructions for
acquiring an image. Please refer to the user’s guide of the
application.
28
Scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using Your Printer in
Linux
Installing the Unified Linux
Driver
You can use your machine in a Linux environment.
Installing the Unified Linux Driver
1
Make sure that you connect your machine to your
computer. Turn both the computer and the machine on.
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
This chapter includes:
2
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
3
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
Getting Started
The supplied CD-ROM provides you with Samsung’s Unified
Linux Driver package for using your machine with a Linux
computer.
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
Samsung’s Unified Linux Driver package contains printer and
scanner drivers, providing the ability to print documents and
scan images. The package also delivers powerful applications
for configuring your machine and further processing of the
scanned documents.
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./install.sh
After the driver is installed on your Linux system, the driver
package allows you to monitor a number of machine devices via
fast ECP parallel ports and USB simultaneously.
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
The acquired documents can then be edited, printed on the
same local or network machine devices, sent by e-mail,
uploaded to an FTP site, or transferred to an external OCR
system.
4
When the welcome screen appears, click Next.
The Unified Linux Driver package is supplied with a smart and
flexible installation program. You don't need to search for
additional components that might be necessary for the Unified
Linux Driver software: all required packages will be carried onto
your system and installed automatically; this is possible on a
wide set of the most popular Linux clones.
29
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When the installation is complete, click Finish.
Uninstalling the Unified Linux Driver
1
When the Administrator Login window appears, type in
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the
printer software. If you are not a super user, ask your system
administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the
icon at the bottom of the desktop. When the Terminal
screen appears, type in:
If the CD-ROM is secondary master and the location to
mount is /mnt/cdrom,
The installation program has added the Unified Driver
Configurator desktop icon and Samsung Unified Driver
group to the system menu for your convenience. If you
have any difficulties, consult the onscreen help that is
available through your system menu or can otherwise be
called from the driver package windows applications,
such as Unified Driver Configurator or Image
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/
cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
Manager
.
NOTE: The installation program runs automatically if you
have an autorun software package installed and configured.
3
4
Click Uninstall
.
Click Next
.
5
Click Finish.
30
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Printers Configuration
Printers configuration has the two tabs: Printers and Classes
.
Using the Unified Driver
Configurator
Printers Tab
You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the Unified
Driver Configurator window.
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer or MFP devices. Since an MFP device
combines the printer and scanner, the Unified Linux Driver
Configurator provides options logically grouped for printer and
scanner functions. There is also a special MFP port option
responsible for the regulation of access to an MFP printer and
scanner via a single I/O channel.
Switches to Printer
configuration.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Shows all of the
installed printer.
Opening the Unified Driver
Configurator
Shows the status,
model name and
URI of your printer.
1
Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver
Configurator
Press each button on the Modules pane to switch to the
corresponding configuration window.
.
You can use the following printer control buttons:
2
•
•
•
•
Refresh: renews the available printers list.
Add Printer: allows you to add a new printer.
Remove Printer: removes the selected printer.
Printers Configuration button
Scanners Configuration button
Ports Configuration button
Set as Default: sets the current printer as a default
printer.
•
•
Stop/Start: stops/starts the printer.
Test: allows you to print a test page to check if the
machine is working properly.
•
Properties: allows you to view and change the printer
properties. For details, see page 33.
You can use the onscreen help by clicking Help
After changing the configurations, click Exit to close the
Unified Driver Configurator.
.
3
31
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Classes Tab
The Classes tab shows a list of available printer classes.
Ports Configuration
In this window, you can view the list of available ports, check
the status of each port and release a port that is stalled in busy
state when its owner is terminated for any reason.
Shows all of the
printer classes.
Switches to
ports
configuration.
Shows all of the
available ports.
Shows the status of the
class and the number of
printers in the class.
Shows the port type,
device connected to
the port and status
•
•
•
Refresh : Renews the classes list.
Add Class... : Allows you to add a new printer class.
Remove Class : Removes the selected printer class.
•
•
Refresh : Renews the available ports list.
Release port : Releases the selected port.
Sharing Ports Between Printers and Scanners
Scanners Configuration
In this window, you can monitor the activity of scanner devices,
view a list of installed Samsung MFP devices, change device
properties, and scan images.
Your machine may be connected to a host computer via the
parallel port or USB port. Since the MFP device contains more
than one device (printer and scanner), it is necessary to
organize proper access of “consumer” applications to these
devices via the single I/O port.
The Samsung Unified Linux Driver package provides an
appropriate port sharing mechanism that is used by Samsung
printer and scanner drivers. The drivers address their devices
via so-called MFP ports. The current status of any MFP port can
be viewed via the Ports Configuration. The port sharing
prevents you from accessing one functional block of the MFP
device, while another block is in use.
Switches to
Scanners
configuration.
Shows all of the
installed scanners.
When you install a new MFP device onto your system, it is
strongly recommended you do this with the assistance of an
Unified Driver Configurator. In this case you will be asked to
choose I/O port for the new device. This choice will provide the
most suitable configuration for MFP’s functionality. For MFP
scanners I/O ports are being chosen by scanner drivers
automatically, so proper settings are applied by default.
Shows the vendor,
model name and type
of your scanner.
•
•
Properties... : Allows you to change the scan properties
Drivers... : Allows you to monitor the activity of the scan drivers.
32
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Printer Properties
Printing a Document
Using the properties window provided by the Printers
configuration, you can change the various properties for your
machine as a printer.
Printing from Applications
There are a lot of Linux applications that you are allowed to
print from using Common UNIX Printing System (CUPS). You
can print on your machine from any such application.
1
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
Select your machine on the available printers list and click
2
3
1
From the application you are using, select Print from the
File menu.
Properties
.
The Printer Properties window opens.
2
3
Select Print directly using lpr
In the LPR GUI window, select the model name of your
machine from the Printer list and click Properties
.
.
Click.
The following five tabs display at the top of the window:
•
General: allows you to change the printer name, location
and description. The name entered in this tab displays on
the printer list in Printers configuration.
•
Connection: allows you to view or select another port. If
you change the printer port from USB to parallel or vice
versa while in use, you must re-configure the printer port
in this tab.
4
Change the printer and print job properties.
•
•
•
Driver: allows you to view or select another printer
driver. By clicking Options, you can set the default
device options.
Jobs: shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed
jobs check box to see previous jobs on the job list.
Classes: shows the class that your printer is in. Click
Add to Class to add your printer to a specific class or
click Remove from Class to remove the printer from the
selected class.
4
Click OK to apply the changes and close the Printer
Properties Window.
33
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper
type, and the orientation of the documents, enables the
duplex feature, adds start and end banners, and changes
the number of pages per sheet.
Scanning a Document
You can scan a document using the Unified Driver Configurator
window.
•Text - allows you to specify the page margins and set the
1
Double-click the Unified Driver Configurator on your
desktop.
text options, such as spacing or columns.
•
Graphics - allows you to set image options that are used
when printing images/files, such as color options, image
size, or image position.
2
3
Click the
button to switch to Scanners Configuration.
Select the scanner on the list.
•Device: allows you to set the print resolution, paper
source, and destination.
5
Click Apply to apply the changes and close the Properties
window.
6
7
Click OK in the LPR GUI window to start printing.
The Printing window appears, allowing you to monitor the
status of your print job.
Click your
scanner.
To abort the current job, click Cancel
.
Printing Files
You can print many different types of files on the Samsung
machine device using the standard CUPS way - directly from
the command line interface. The CUPS lpr utility allows you do
that. But the drivers package replaces the standard lpr tool by
a much more user-friendly LPR GUI program.
To print any document file:
1
Type lpr <file_name> from the Linux shell command
line and press Enter. The LPR GUI window appears.
When you have only one MFP device and it is connected
to the computer and turned on, your scanner appears on
the list and is automatically selected.
When you type only lpr and press Enter, the Select
file(s) to print window appears first. Just select any files
If you have two or more scanners attached to your
computer, you can select any scanner to work at any
time. For example, while acquisition is in progress on the
first scanner, you may select the second scanner, set the
device options and start the image acquisition
simultaneously.
you want to print and click Open
In the LPR GUI window, select your printer from the list,
and change the printer and print job properties.
.
2
3
For details about the properties window, see page 33.
Click OK to start printing.
4
5
Click Properties.
Load the document to be scanned face up into the ADF
(Automatic Document Feeder) or face down on the
document glass.
6
Click Preview in the Scanner Properties window.
34
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
The document is scanned and the image preview appears
in the Preview Pane.
10When you are finished, click Save on the toolbar.
11Select the file directory where you want to save the image
and enter the file name.
12Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later
scanning.
To save a new Job Type setting:
1
2
3
4
Change the options from the Scanner Properties window.
Click Save As
Enter the name for your setting.
Click OK
Drag the pointer to
set the image area
to be scanned.
.
.
Your setting is added to the Saved Settings drop-down
list.
To save a Job Type setting for the next scan job:
1
Select the setting you want to use from the Job Type drop-
down list.
7
Change the scan options in the Image Quality and Scan
Area sections.
2
The next time you open the Scanner Properties window,
the saved setting is automatically selected for the scan
job.
•Image Quality: allows you to select the color
composition and the scan resolution for the image.
To delete a Job Type setting:
1
•
Scan Area: allows you to select the page size. The
Advanced button enables you to set the page size
manually.
Select the setting you want to delete from the Job Type
drop-down list.
2
Click Delete
.
If you want to use one of the preset scan option settings,
select from the Job Type drop-down list. For details about
The setting is deleted from the list
You can restore the default setting for the scan options
Using the Image Manager
The Image Manager application provides you with menu
commands and tools to edit your scanned image.
by clicking Default
.
8
9
When you have finished, click Scan to start scanning.
The status bar appears on the bottom left of the window
to show you the progress of the scan. To cancel scanning,
click Cancel
.
The scanned image appears in the new Image Manager
tab.
Use these tools to
edit the image.
If you want to edit the scanned image, use the toolbar.
For further details about editing an image, see page 35.
35
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
You can use the following tools to edit the image:
Tools Function
Saves the image.
Cancels your last action.
Restores the action you canceled.
Allows you to scroll through the image.
Crops the selected image area.
Zooms the image out.
Zooms the image in.
Allows you to scale the image size; you can
enter the size manually, or set the rate to
scale proportionally, vertically, or
horizontally.
Allows you to rotate the image; you can
select the number of degrees from the drop-
down list.
Allows you to flip the image vertically or
horizontally.
Allows you to adjust the brightness or
contrast of the image, or to invert the
image.
Shows the properties of the image.
For further details about the Image Manager application, refer
to the onscreen help.
36
Using Your Printer in Linux
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the CUPS
driver by installing the PPD file.
Installing Software for
Macintosh
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver (only available when you use a printer
which supports the PostScript driver), for printing on a
Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
NOTE: Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
Install the Printer driver
1
2
3
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
This chapter includes:
• Printing
4
5
6
7
8
• Scanning
Double-click the MAC_Printer folder.
Double-click the Samsung SPLC Installer icon.
Enter the password and click OK
The Samsung SPL Installer window opens. Click Continue
and then click Continue
Select Easy Install and click Install
.
.
9
.
10After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
4
5
6
7
Double-click the MAC_Installer folder.
Double-click the MAC_Printer folder.
Double-click the Samsung SPLC Installer icon.
Enter the password and click OK
The Samsung SPL Installer window opens. Click Continue
and then click Continue
Select Uninstall and then click Uninstall
When the uninstallation is done, click Quit
.
.
8
9
.
.
37
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Scan driver
1
2
3
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Double-click the MAC_Installer folder.
Setting Up the Printer
Set up for your printer will be different depending on which
cable you use to connect the printer to your computer—the
network cable or the USB cable.
For a Network-connected Macintosh
4
5
6
7
8
9
Double-click the MAC_Twain folder.
NOTE Some printers do not support a network
:
Double-click the Samsung ScanThru Installer icon.
interface. Before connecting your printer, make sure
that your printer supports a network interface by
referring to Printer Specifications in your Printer User’s
Guide.
Enter the password and click OK
Click Continue
Click Install
.
.
.
10Click Continue.
11After the installation is finished, click Quit.
1
Follow the instructions on “Installing Software for
Macintosh” on page 37 to install the PPD and Filter files on
your computer.
Uninstalling the Scan driver
2
3
4
5
Open Print Setup Utility from the Utilities folder.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
Click Add on the Printer List
.
Select the IP Printing tab.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
Select Socket/HP Jet Direct in Printer Type
.
WHEN PRINTING A DOCUMENT CONTAINING MANY
PAGES, PRINTING PERFORMANCE MAY BE
ENHANCED BY CHOOSING SOCKET FOR PRINTER
TYPE OPTION.
Enter the printer’s IP address in the Printer Address
field.
Enter the queue name in the Queue Name field. If you
cannot determine the queue name for your printer server,
try using the default queue first.
3
4
5
6
7
8
Double-click the MAC_Installer folder.
Double-click the MAC_Twain folder.
Double-click the Samsung ScanThru Installer icon.
Enter the password and click OK
Click Continue
Select Uninstall from the Installation Type and then Click
Uninstall
Click Continue
.
6
7
.
.
9
.
8
9
Select Samsung in Printer Model and your printer in
10When the uninstallation is done, click Quit.
Model Name
.
Click Add
.
10Your printer’s IP address appears on the Printer List, and
is set as the default printer.
For a USB-connected Macintosh
1
Follow the instructions on “Installing Software for
Macintosh” on page 37 to install the PPD and Filter files on
your computer.
2
3
4
5
Open Print Setup Utility from the Utilities folder.
Click Add on the Printer List
.
Select the USB tab.
Select Samsung in Printer Model and your printer in
Model Name
Click Add
.
6
.
Your printer appears on the Printer List, and is set as the
default printer.
38
Using Your Printer with a Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Printer Settings
You can use advanced printing features when using your
printer.
Printing
From your Macintosh application, select Print from the File
menu. The printer name which appears in the printer properties
window may differ depending on the printer in use. Except for
the name, the composition of the printer properties window is
similar.
NOTES
:
• The Macintosh printer’s properties window that appears in
this User’s Guide may differ depending on the printer in use.
However the composition of the printer properties window is
similar.
• You can check your printer name in the supplied CD-
ROM.
Layout Setting
The Layout tab provides options to adjust how the document
appears on the printed page. You can print multiple pages on
one sheet of paper.
Select Layout from the Presets drop-down list to access the
following features. For details, see “Printing Multiple Pages on
One Sheet of Paper” on the next column.
Printing a Document
When you print with a Macintosh, you need to check the printer
software setting in each application you use. Follow these steps
to print from a Macintosh.
1
2
3
Open a Macintosh application and select the file you want
to print.
Open the File menu and click Page Setup (Document
Setup in some applications).
Choose your paper size, orientation, scaling, and other
options and click OK
.
Make sure that your
printer is selected.
▲
Mac OS 10.3
▲
Mac OS 10.3
4
5
Open the File menu and click Print
.
Choose the number of copies you want and indicate which
pages you want to print.
6
Click Print when you finish setting the options.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Features Setting
The Printer Features tab provides options for selecting the
paper type and adjusting print quality.
Printing Multiple Pages on One Sheet
of Paper
You can print more than one page on a single sheet of paper.
This feature provides a cost-effective way to print draft pages.
Select Printer Features from the Presets drop-down list to
access the following features:
1
2
From your Macintosh application, select Print from the
File menu.
Select Layout
.
▲
Mac OS 10.3
Paper Type
Set Type to correspond to the paper loaded in the tray from
which you want to print. This will let you get the best quality
printout. If you load a different type of print material, select the
corresponding paper type.
Resolution(Quality)
The Resolution options you can select may vary
depending on your printer model. You can select the
printing resolution. The higher the setting, the sharper the clarity
of printed characters and graphics. The higher setting also may
increase the time it takes to print a document.
▲
Mac OS 10.3
Color Mode
3
4
Select the number of pages you want to print on one sheet
of paper on the Pages per Sheet drop-down list.
Select the page order from the Layout Direction option.
You can set the color options. Setting to Color typically produces
the best possible print quality for color documents. If you want to
print a color document in grayscale, select Grayscale
.
To print a border around each page on the sheet, select
the option you want from the Border drop-down list.
5
Click Print, and the printer prints the selected number of
pages on one side of each page.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
If you want to scan documents using other software, you will
need to use TWAIN-compliant software, such as Adobe
PhotoDeluxe or Adobe Photoshop. The first time you scan with
your machine, select it as your TWAIN source in the application
you use.
The basic scanning process involves a number of steps:
• Place your photograph or page on the document glass or
ADF.
• Open an application, such as PhotoDeluxe or Photoshop.
• Open the TWAIN window and set the scan options.
• Scan and save your scanned image.
NOTE: You need to follow the program’s instructions for
acquiring an image. Please refer to the User’s Guide of the
application.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION
INDEX
paper type, set
Macintosh 40
print 34
poster, print 19
print
A
L
advanced printing, use 18
Layout properties, set
Macintosh 39
Windows 13
B
Linux
document 12
fit to page 20
from Macintosh 39
from Windows 12
N-up
Macintosh 40
Windows 18
overlay 22
driver, install 29
printer properties 33
printing 33
booklet printing 19
scanning 34
C
canceling
scan 28
M
Macintosh
driver
poster 21
PRN 12
scaling 20
D
install 37
uninstall 37
printing 39
document, print
Macintosh 39
watermark 21
print resolution 34
printer driver, install
Linux 29
printer properties
Linux 33
printer properties, set
Macintosh 39
Windows 13
printer resolution, set
Macintosh 40
Windows 15
Windows 12
scanning 41
setting up the printer 38
MFP driver, install
Linux 29
double-sided printing 20
E
Extras properties, set 16
N
n-up printing
Macintosh 40
Windows 18
F
favorites settings, use 17
printer software
install
G
O
Macintosh 37
Graphics properties, set 15
orientation, print 34
Windows 13
overlay
Windows
uninstall
Macintosh 37
Windows 11
printing
H
create 22
delete 22
print 22
help, use 17
booklets 19
double-sided 20
from Linux 33
I
install
P
printer driver
Macintosh 37
Paper properties, set 14
paper size, set 14
print 34
R
resolution
printing 34
Windows
installing
Linux software 29
paper source, set 34
Windows 14
42
Download from Www.Somanuals.com. All Manuals Search And Download.
S
scanning
Linux 34
SmarThru 26
TWAIN 28
WIA driver 28
scanning from Macintosh 41
setting
darkness 15
favorites 17
image mode 15
resolution
Macintosh 40
Windows 15
toner save 15
true-type option 15
software
install
Macintosh 37
Windows
reinstall
Windows 10
system requirements
Macintosh 37
uninstall
Macintosh 37
Windows 11
status monitor, use 24
T
toner save, set 15
TWAIN, scan 28
U
uninstall, software
Macintosh 37
Windows 11
uninstalling
MFP driver
Linux 30
W
watermark
create 21
delete 21
edit 21
print 21
WIA, scan 28
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Ver. 1.07
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Clock 63 1420 User Guide
Radio Shack Speaker PRO LS200 User Guide
RCA Universal Remote RCRP05B User Guide
Remington Impact Driver 491 User Guide
Samsung Cell Phone A197 User Guide
Samsung Tablet GT P5113 User Guide
Sanyo Flat Panel Television LCD 26XR9DA User Guide
Sanyo Projector PLC XW50 User Guide
Sanyo Vacuum Cleaner SC B550 User Guide
SECO LARM USA TV Cables CA 1510 3FLQ User Guide