Samsung MP3 Player YP 60H User Guide

- Sports Function Support  
- Encoding Function  
- Removable Storage Device  
- 3D surround sound  
- MP3 & WMA Playback  
- FM Reception  
- 15-Hour Continuous Play  
AH68-01509N (Rev 0.0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n t e n t s  
Additional Usage  
Loop Repeating  
MENU Mode  
Changing Modes  
Setting Advanced Functions  
Playing Folders  
Selecting the Play Mode  
Selecting Sound Effects  
Managing Files  
Deleting  
Formatting  
Setting Times  
WATCH TIME SET / POWER OFF TIME  
SLEEP TIME / BACKLIGHT TIME  
Setting the Environment  
DISPLAY  
- INFORMATION / CONTRAST  
SOUND CONTROL  
- WOW LEVEL  
Preparations  
40  
41  
42  
43  
44  
45  
46  
48  
48  
48  
49  
49  
50  
51  
51  
51  
52  
52  
53  
53  
54  
54  
55  
56  
57  
Safety Instructions  
Battery Charger Safety  
Cautions for Recharging  
Features  
4
6
7
8
Accessories  
11  
12  
Location of Controls (yepp)  
Connection to Com puter  
Connecting the yepp to a PC  
Manual Installation of the USB Driver  
Using the removable storage  
Downloading/Uploading files  
Disconnecting the USB cable  
Installing yepp Studio  
14  
18  
22  
22  
23  
24  
26  
28  
30  
- ENCODE BIT RATE  
- BEEP ON/OFF / DEFAULT VOLUME  
Setting Additional Regional Functions  
- LANGUAGE / UNIT  
Using Navigation  
To View Help on yepp Studio  
Installing Fitness Manager  
Using Fitness Manager  
Setting FM  
Using Sports Function  
Basic Usage  
Playing Music and Turning Off the Device  
Adjusting the Volume / Hold Function  
Searching for Music/Voice Files  
Encoding MP3s  
34  
35  
36  
37  
38  
39  
Appendix  
MENU Table  
62  
Custom er Support  
Troubleshooting  
Specifications  
Listening to FM Radio  
Encoding From FM Radio  
64  
66  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
S a fe t y In s t ru c t io n s  
Earphones  
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.  
Do not expose to extreme  
temperatures (above 95°F or below  
23°F). Do not expose to moisture.  
Do not let any foreign matter  
spill into the device.  
Do not apply excessive pressure  
to the device.  
Follow Traffic Safety Instructions  
Do not use the earphones while driving an automobile or riding a bicycle.  
It’s not only dangerous, but also against the law.  
An accident may result if you turn up the volume of the earphones too high while walking  
down the street, especially when crossing at intersections.  
Protect your ears  
Do not turn the volume up too high.  
Do not use the unit near any  
appliance that generates a strong  
magnetic field.  
Do not expose to chemicals such  
as benzene and thinners.  
Do not place heavy objects on  
top of the device.  
Doctors warn against prolonged exposure to high volumes.  
Stop using the device or turn the volume down if you get ringing in your ears.  
Ambient operating conditions  
Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)  
Do not expose to direct  
sunlight or heat sources.  
Humidity : 10 ~ 75%  
Do not store in dusty areas.  
Do not try to disassemble and  
repair the device yourself.  
Environmental Information  
Follow local guidelines for waste disposal when discarding packaging, batteries,  
and old electronic appliances.  
yepp packaging uses cardboard, polyethylene etc., and does not use  
any unnecessary materials.  
Please be aware that we disclaim all responsibility for damages from loss of saved or recorded  
data due to breakdown, repair or other causes.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba t t e ry Ch a rg e r S a fe t y  
Ca u t io n s fo r Re c h a rg in g  
A charger is provided with the YP-60.  
Please be sure to only use the provided adapter.  
CAUTION  
RISK OF ELECTRIC SHOCK. DO NOT OPEN  
!
Plug the charger into a wall outlet.  
When recharging is complete,  
“FULLY CHARGED” is shown in the display window.  
Recharging continues to take place even when  
the USB cable is connected.  
The uninsulated parts inside the charger can  
cause electric shock.  
For your safety, do not open the charger’s case.  
Caution  
Do not charge longer than the specified charge time to avoid risk of fire.  
Do not plug several devices into the same outlet.  
Read this User Manual to prevent any problems that  
may occur while using the charger.  
!
Do not use a damaged internal rechargable battery or recharge adapter.  
When using the rechargeable battery for the first time or after several  
months of non-use, fully charge it first.  
Do not charge the rechargeable battery for more than 6 hours.  
Overcharging or overdischarging will reduce battery life.  
You should check the recharging time and switch to a new internal rechargable battery  
when the battery life becomes low.  
Warning  
Use the charger away from water sources to avoid fire or electric shock.  
The rechargeable battery is a consumable item and its capacity will decrease gradually.  
To prolong the life of your battery, use the fully charged battery until it is completely  
discharged, and then fully charge it again before use. If you charge a battery that is not  
completely drained, the battery operating time will decrease. In this case, repeat the full  
charge/discharge cycle several times.  
Caution  
To avoid electric shock, Use the charger only with a power outlet that matches  
the converter's plug.  
Make sure that the charger's plug is inserted all the way into the outlet.  
Do not let metallic objects, such as necklaces or coins, come into contact with the  
terminals (metallic parts) of the charger and the built-in rechargeable battery.  
A fire or electric shock may result.  
Be careful not to touch the recharge adapter with wet hands.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sports Function Support  
3D surround sound  
Using the Consumed Calories, Heartrate and Stopwatch functions will help you  
exercise much more efficiently and scientifically.  
You will hear deep bass and 3D surround sound.  
is a trademark of SRS Labs, Inc.  
WOW technology is incorporated under license from SRS labs, Inc.  
Encoding Function  
You can make an MP3 file from an external source using the ENC jack  
on the main unit.  
MP3 & WMA Playback  
You can also convert an FM radio program into an MP3 file in real time.  
MP3 is an MPEG1 Layer3 audio format.  
WMA is a Microsoft Windows Media audio format.  
Rem ovable Storage Device  
You can easily copy and paste files to the yepp player using Windows Explorer.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ac c e s s o rie s  
FM Reception  
Player  
Sports Earphone  
Arm band  
Finger Clip  
Necklace case  
Listening to an FM program is made easy with Auto Search and Frequency  
Memory functions.  
Sound  
Earphone  
Necklace extension cable Line In cable  
You can adjust the equalizer manually.  
USB cable  
Charger  
Installation CD User manual  
Model  
YP-60 H  
128MB  
YP-60 V  
256MB  
YP-60 X  
512MB  
YP-60 Z  
1GB  
15-Hour Continuous Play  
Built-in memory  
Use a lithium polymer rechargable battery in order to play continuously for  
up to 15 hours.  
The capacity of the useable built-in memory is less than indicated as the internal firmware  
uses a part of the memory as well.  
Design of accessories is subject to change, for the purposes of improvement, without notice.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lo c a t io n o f Co n t ro ls (ye p p )  
Display  
Heart Rate Measurement Sensor  
Earphone Jack  
Equalizer, SRS indicator  
Folder Play Indicator  
Hold Switch  
Calorie Measurement Indicator  
Sleep Time indicator  
Time indicator  
Display  
Remaining Battery  
Power indicator  
MENU/  
07:32AM  
001  
Play/Stop/Pause  
On/Off Button  
Nor  
Loop Repeating Button  
Mode indicator  
Title (track & artist) indicator  
Playtime indicator  
Track 1  
Move to Track/  
Speed Search Button  
Volume Button  
NOR  
0 0 : 0 1 : 3 0  
ENC/NAVI.  
Button  
Sports Function Button  
Track Number indicator  
Play mode/Interval repeat indicator  
Play/Stop/Pause indicator  
USB Cable  
Connection Port  
ENC Jack  
Reset Hole  
Note  
If the device won’t respond even after pressing the buttons, reboot it by pressing the Reset Hole with a pin.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n n e c t in g t h e ye p p t o a P C  
Before connecting yepp to PC, make sure to install  
System  
USB driver. If Add New Hardware Wizard” appears,  
press the [Cancel] button and install USB driver.  
Requirements.  
The PC system must meet the  
following specifications:  
Choose the language you wish to use.  
2
3
Installing software  
Pentium 133MHz or greater.  
Windows 98SE/ME/2000/XP.  
40MB of available hard disk space  
CD-ROM drive.  
Insert the Installation CD into the CD-ROM drive.  
The picture shown below appears.  
Select [yepp USB Driver].  
1
(double speed or greater)  
USB port (1.1) supported.  
VGA graphics.  
Click [Next] in the series of windows  
that appear.  
DirectX 8.0 or above.  
Continued...  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n n e c t in g t h e ye p p t o a P C  
Connecting the yepp to a PC with a USB cable  
How to check the USB driver  
Windows 98/ME:  
Control Panel System  
Disk drives SAMSUNG YP-60  
Connect a USB cable to the USB port on the computer.  
4
Device Manager  
Connect the opposite end of the USB cable to the USB cable  
port on the right side of the yepp.  
5
6
7
Windows 2000:  
Control Panel  
System  
Hardware  
If you disconnect the USB cable from your PC while  
implementing a command or initializing during  
USB driver installation, your PC may not function correctly.  
Device Manager  
Disk drives  
SAMSUNG YP-60 USB Device  
Windows XP:  
Control Panel  
Device Manager  
SAMSUNG YP-60 USB Device  
System  
Hardware  
The USB driver is installed with a message saying that  
it is searching for a new device. You may not see the  
display screen during installation.  
Go to the device manager to check that  
installation has been successfully completed.  
Disk drives  
When the USB driver is not installed automatically, refer to the next page.  
8
Upon installation of the USB driver  
"SAMSUNG YP-60" will appear in the  
[System Properties]  
[Device Manager].  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ma n u a l In s t a lla t io n o f t h e US B Drive r  
Go to “Downloading/Uploading Files” if the USB driver is in place.  
Follow these steps if the USB driver is not in place.  
When an error occurs during installation of the USB driver  
After selecting the driver,  
click on [Update Driver].  
Select a compatible driver,  
click on [Next] to finish.  
4
5
Check the device manager.  
1
Windows 98,ME:  
Control Panel  
System  
Device Manager  
Windows 2000:  
Control Panel  
System  
Hardware  
Hardware  
Device Manager  
Windows XP:  
Control Panel  
System  
Device Manager  
Check if there is a device listed with an  
exclamation point or a question mark  
(displayed as unknown device or USB device).  
2
3
Double click on the device listed with an  
exclamation point or a question mark.  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ma n u a l In s t a lla t io n o f t h e US B Drive r  
In Windows 98  
Click [Next] in the series of windows that appear.  
Select [Specify a location]  
and then select  
Š
[CD-ROM]/driver for win98.  
You must reboot your computer to complete the installation.  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Us in g t h e re m o va b le s t o ra g e  
Downloading/Uploading files  
Disconnecting the USB cable  
After completing the file transmission, you must disconnect the cable in the following way:  
Connect the yepp to your PC and turn it on.  
1
2
3
Double-click on the green arrow in  
1 the taskbar on the bottom right of  
Open Windows Explorer on PC.  
the window.  
Select the file to save and drag-and-drop it into the removable disk icon.  
(In numerical, alphabetical order)  
When the [Hardware device stopped] message appears,  
press the [OK] button and disconnect the USB cable.  
2
Notice  
Music File can be played only when it is downloaded in the  
MUSIC folder or the folder right below of MUSIC folder.  
N
The order of music files is not relative to the replay order  
when you select a Removable Disk in Windows Explorer.  
While either DOWNLOAD or UPLOAD on the LCD of yepp  
is turned on, do not remove USB cable. Your PC might  
malfunction.  
If “READY” will be displayed on the LCD of yepp, it means  
that transmission is completed. Then you can remove USB  
cable.  
Note  
On search engine of Windows98, put the mouse on the portable drive and click the right mouse  
button to execute “Eject”.  
(When “READY” is displayed on the LCD of yepp after executing “Eject”, remove USB cable.)  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In s t a llin g ye p p S t u d io  
Insert the Installation CD into CD-ROM drive.  
Select [yepp Studio].  
Click [Next] in the series of windows that appear.  
1
3
Please refer to Help for more information on how to use yepp Studio.  
Select language  
2
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In s t a llin g ye p p S t u d io  
To View Help on yepp Studio  
Run yepp Studio and press F1.  
Note  
Help will appear.  
Music recognition technology and related data are provided by Gracenote and Gracenote CDDB®  
Music Recognition ServiceSM  
.
Move the arrow to the top of yepp Studio and right click on the mouse.  
The following selection window will appear.  
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote CDDB  
logo and logotype, and the "Powered by Gracenote CDDB" logo are trademarks of Gracenote. Music  
Recognition Service and MRS are service marks of Gracenote.  
Click on Help and the Help window will appear.  
If a firewall is installed on the PC, it may not be possible to import CDDB information.  
N
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In s t a llin g Fit n e s s Ma n a g e r  
Insert the Installation CD into your PC's CD-ROMdrive.  
Select [Fitness Manager].  
Click [Next] in the series of windows that appear.  
1
3
Choose the language you wish to use.  
2
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Us in g Fit n e s s Ma n a g e r  
When connecting to Fitness Manager for  
3 the first time, click [New Account] and  
Log In  
create a new username of 6 letters or less.  
Turn on the yepp and connect it to your PC.  
1
2
Click [yepp Sports Fitness Manager] on the desktop.  
Press the [OK] button after entering your  
personal information.  
4
After entering a username and password,  
5 log in by clicking [Login].  
Set a nickname for the  
YP-60 that you are using.  
Š
- No more than 6 English  
characters can be entered.  
Note  
If Fitness Manager is run after connecting the device to the PC, the measured  
data saved on the device will be updated automatically to the PC and then deleted.  
Fitness Manager cannot be used while yepp Studio is running.  
30  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Us in g Fit n e s s Ma n a g e r  
[Calorie Chart]  
Setting Up a User  
You can check the calories consumed  
as a result of exercise in units of years,  
months and days.  
Turn on the yepp and connect it to your PC.  
1
2
: Displays calorie data for one year based  
on the current point.  
Click [Account] after selecting  
Fitness Manager.  
: Displays calorie data for one month based  
on the current point.  
After setting up the user,  
: Displays calorie data by time as of today.  
3 click the [OK] button.  
Setting Up a New User  
Deleting a User  
[Biorhythm]  
You can check the biorhythm of the  
selected user.  
Using Fitness Manager  
[Calorie List]  
You can see the measured data that has been saved.  
- Data : Displays the data and time when a user takes exercise.  
- Exercise time : Displays the exercise in Hour and Minute.  
- Starting HR : Displays Heart rate(bmp) before exercise.  
- Final HR : Displays Heart rate(bmp) after exercise.  
- Calorie Data : Displays the calorie consumption(kcal).  
- Remark : Displays the contents that a user enters.  
Note  
If [Edit Profile] is clicked, personal information can be changed.  
The resulting graph of the biorhythm reflects the statistical values of the  
measured data and so may be different from the actual values.  
Refer to Help for more detailed information about using yepp Studio.  
32  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P la yin g Mu s ic a n d Tu rn in g Off t h e De vic e  
Ad ju s t in g t h e Vo lu m e /Ho ld Fu n c t io n  
Turning Power On and Off  
Adjusting the Volume  
Power On : Press and hold the  
button to turn on the power.  
button to turn off the power.  
Press the  
,
buttons to adjust the volume.  
07:32AM  
001  
Nor  
30  
Power Off : Press and hold the  
NOR  
0 0 : 0 1 : 3 0  
Playing Music  
Note  
The volume can be adjusted in increments between 0 and 40.  
Press the buttons once to adjust the volume by one step.  
Press and hold the buttons to increase or decrease the volume in greater increments.  
07:32AM  
001  
Nor  
Press the  
button.  
,
Track 1  
Playback starts.  
sports  
,
NOR  
0 0 : 0 1 : 3 0  
HOLD Function  
Pausing Music  
In Hold mode, all buttons are disabled.  
07:32AM  
001  
Nor  
Press the  
button to pause playback.  
Track 1  
GOOD BYE  
While in Pause mode, briefly press  
NOR  
0 0 : 0 1 : 3 0  
Slide the  
switch on the player in the  
again to resume playback.  
direction of the arrow.  
HOLD!  
When the button is pressed,  
Note  
the “ HOLD!” message will appear on  
the display.  
WMA files can be played only as music files with a compression rate of 64Kbps-192Kbps,  
that can be created in Windows Media Player (Version 8.0).  
The power off time can be set in the menu.  
34  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e a rc h in g fo r Mu s ic /Vo ic e File s  
En c o d in g MP 3 s  
Connect the Audio Output port on the external audio source  
To search for specific parts during play  
1 (or the Line Out port) to the ENC port on the device with the Line in cable.  
A desired passage can be searched for by pressing and holding down the  
,
buttons during play.  
To change tracks during play  
If the  
button is pressed during play, the next track is played.  
button is pressed before five seconds have passed since starting to play a track,  
button is pressed after five seconds,  
the current track is replayed from the beginning.  
If the  
the previous track is played and if the  
If the ENC button is pressed, MP3 encoding begins.  
2
If the  
button is pressed, encoding is paused and if the  
button is pressed again,  
the encoding resumes.  
To change tracks when stopped  
If the ENC button is pressed during encoding, the encoding stops and an  
encoding file is created.  
3
If the  
,
buttons are pressed when stopped, the yepp moves  
to the previous or next track, respectively.  
Encoding is performed in order (ENC001, ENC002, etc.)  
and files are saved in the MP3 format after encoding.  
Note  
Note  
VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according  
The bit rate can be set to 64Kbps, 96Kbps and 128Kbps.  
to the type of sounds, such as their pitch, in the file.  
During encoding, there is no beeping sound and the button lights and  
With VBR files, pressing the  
in the previous track playing.  
button within 5 seconds from the start of the track may not result  
backlight do not illuminate.  
Caution  
Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.  
Do not disconnect the Line cable during Encoding.  
If the battery is not sufficiently charged, encoding will not be done.  
Adjust the volume of the external audio source to a suitable level and encode it.  
If the volume level is extremely high, the sound quality may not be good.  
36  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lis t e n in g t o FM Ra d io  
En c o d in g Fro m FM Ra d io  
Select FM mode first. (Refer to “Changing Modes”)  
Doing FM encoding  
Manual Search for a Frequency  
Press the ENC button during FM reception.  
1
Press the  
,
buttons to search manually for  
Encoding of the currently transmitted  
07:32AM  
the desired frequency.  
FM broadcast begins.  
91.90MHz  
FMCH — —  
Press the ENC button again.  
2
A file is created and the encoding stops.  
Files are saved in order, starting FM001,  
FM002...etc., and stop automatically when  
the memory is full.  
Automatic Search for a Frequency  
Press and hold the  
,
buttons in order to  
07:32AM  
search for and stop at frequencies with reception.  
91.90MHz  
FM Scan  
Note  
During encoding, there is no beeping sound and the button lights and back light do not illuminate.  
Encoded files will become 64Kbps files after they are encoded from FM.  
38  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lo o p Re p e a t in g  
MENU Mo d e  
Press and hold the  
After navigating with the  
button while in Music/Voice Mode.  
buttons, press the select the desired menu.  
button is pressed.  
Starting Point  
Ending Point  
,
Menu mode is cancelled if the  
While playing music files, press the  
button briefly at the  
beginning of the loop you want to  
set.  
Press the  
again to set the end of the loop.  
button briefly  
MENU  
EXIT  
MENU  
MODE SELECT  
A
appears in the display.  
B
MODE SELECT  
SETTING  
The loop is played repeatedly.  
SETTING  
NAVIGATION  
appears in the display.  
A
07:32AM  
001  
Nor  
07:32AM  
001  
Nor  
MENU  
MENU  
NAVIGATION  
SETTING  
Track 1  
Track 1  
FM SETTING  
EXIT  
NAVIGATION  
FM SETTING  
A
A
0 0 : 0 1 : 3 0  
0 0 : 0 1 : 3 8  
B
MODE SELECT : When changing modes.  
SETTING : When changing the yepp’s advanced functions.  
NAVIGATION : When performing a simple search for saved music files.  
FM SETTING : When saving frequencies automatically or checking saved frequencies.  
EXIT : To exit MENU.  
Note  
Press the  
button briefly to cancel the loop.  
Note  
Loop Repeat is automatically released if you Speed Search with the  
,
buttons.  
In MENU mode, no input for 30 seconds will cancel the MENU mode.  
40  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a n g in g Mo d e s  
S e t t in g Ad va n c e d Fu n c t io n s  
Press and hold the  
button.  
Select SETTING in the MENU. (Refer to MENU Mode)  
1
2
3
1
2
In SETTING, after moving to the desired function with the  
,
button,  
After using the  
,
button to move to MODE SELECT, press the  
button.  
press the  
button.  
Move to the mode you want by using the  
press the button.  
,
buttons, and then  
SETTING  
EXIT  
SETTING  
SETTING  
ENVIRONMENT  
EXIT  
TIME  
FOLDER PLAY  
ENVIRONMENT  
EXIT  
MODE SELECT  
MODE SELECT  
LINE ENC  
EXIT  
MODE SELECT  
PLAY MODE  
FOLDER PLAY  
EXIT  
MUSIC  
FM  
FM ENC  
LINE ENC  
EXIT  
SETTING  
FILE  
SETTING  
SOUND EFFECT  
FILE  
SETTING  
MUSIC  
PLAY MODE  
SOUND EFFECT  
FILE  
Music Mode  
EXIT  
LINE ENC Mode  
TIME  
ENVIRONMENT  
TIME  
MODE SELECT  
MODE SELECT  
FM  
MUSIC  
FM  
FM ENC  
LINE ENC  
FM ENC  
FM ENC Mode  
FM Mode  
42  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P la yin g Fo ld e rs  
S e le c t in g t h e P la y m o d e  
Select FOLDER PLAY in SETTING menu.  
Select PLAY MODE in SETTING menu.  
1
2
1
2
FOLDER PLAY  
The saved folders are shown.  
F
MUSIC  
Love You  
LOCK  
In PLAY MODE, after moving to the desired mode with the  
,
button,  
press the  
button.  
PLAY MODE  
PLAY MODE  
PLAY MODE  
EXIT  
NORMAL  
REPEAT ONE  
REPEAT ALL  
SHUFFLE  
In PLAY MODE, after moving to the desired folder  
NORMAL  
REPEAT ONE  
REPEAT ONE  
REPEAT ALL  
07:32AM  
Nor  
with the  
,
button press the  
button.  
The files in the selected folder are played.  
FOLDER PLAY does not work when there  
aren’t any files in the folder.  
Track 1  
NORMAL : To play all the tracks in order one time.  
REPEAT ONE : To repeat one track.  
REPEAT ALL : To repeat all tracks.  
NOR  
001  
0 0 : 0 1 : 3 0  
Move to each respective mode by selecting  
MUSIC, FM ENC or LINE ENC.  
SHUFFLE : To play tracks at random.  
EXIT : To move to the higher-level menu.  
44  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t t in g S o u n d Effe c t s  
EQ  
Select SOUND EFFECT in SETTING menu.  
1
2
Use the  
,
buttons to move  
1to the setting you want  
EQ  
EQ  
In SOUND EFFECT, after moving to the desired sound mode with the  
,
button,  
EXIT  
JAZZ  
(out of the 4 settings available)  
and press the button to select.  
press the  
button.  
NORMAL  
CLASSIC  
ROCK  
NORMAL DBB  
SOUND EFFECT  
SOUND EFFECT  
TRUBASS  
WOW  
EXIT  
EQ  
EQ  
EQ  
USER EQ  
EXIT  
CLASSIC DBB  
JAZZ DBB  
SRS  
EXIT  
NORMAL  
ROCK DBB  
SRS (  
) : You will hear 3D Stereo sound.  
If you want to manually adjust  
the equalizer, select User EQ  
and Bass/Treble.  
TRUBASS (  
) : This is a bass boost feature that adds fullness to the sound.  
2
USER EQ  
USER EQ  
WOW : This feature allows you to enjoy the SRS and Trubass features simultaneously.  
EXIT  
BASS  
TREBLE  
EXIT  
BASS  
TREBLE  
EXIT : To move to the higher-level menu  
BASS/TREBLE can each be  
adjusted from 0 to 10 with  
the  
,
button.  
BASS  
TREBLE  
6
5
Note  
Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.  
This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.  
You can only set SRS functions in Music Mode.  
46  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ma n a g in g File s  
S e t t in g Tim e s  
Select TIME in SETTING menu.  
Deleting  
WATCH TIME SET  
Select FILE in SETTING.  
1
Use the  
,
buttons to set the clock time manually.  
Select DELETE and then move to the file you  
Select UPDATE to finish setting the time after  
2 wish to delete.  
MUSIC DELETE  
setting manually.  
EXIT  
If EXIT is selected, files in other folders can  
001:Track 1.mp3  
002:Track 2.mp3  
also be selected.  
Select CONFIRM in the DELETE CONFIRM Window  
3 after pressing the  
DELETE CONFIRM  
button.  
CONFIRM  
CANCEL  
The selected file is deleted.  
POWER OFF TIME  
Use the  
,
buttons to set the POWER OFF TIME.  
Formatting  
The power off time can be set from 3 to 180 seconds.  
After stopping playback, the power is turned off  
automatically if no buttons have been pressed  
during the set time.  
POWER OFF TIME  
120 sec  
FILE  
Select FILE in SETTING.  
1
DELETE  
FORMAT  
EXIT  
Select FORMAT in FILE.  
When set to NO POWER OFF, the power does not  
turn off even when the device is stopped.  
2
Formatting is performed if CONFIRM is selected.  
FORMAT  
Note  
CONFIRM  
CANCEL  
All files are deleted if the yepp is fomatted.  
48  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t t in g Tim e s  
S e t t in g t h e En viro n m e n t  
Select ENVIRONMENT in the SETTING menu.  
DISPLAY  
SLEEP TIME  
Use the  
,
buttons to set the SLEEP TIME.  
SLEEP TIME  
150 min  
The sleep time can be set from 3 to 180 minutes.  
The power turns off automatically after the set time  
has passed.  
Select DISPLAY in the ENVIRONMENT.  
INFORMATION  
When set to NO SLEEP, the power does not turn off  
automatically.  
Use the  
,
buttons to select the music mode and  
select the content to be displayed at the top of the Screen  
Display Window.  
INFORMATION  
EXIT  
BACKLIGHT TIME  
PLAY TIME  
REMAIN TIME  
PLAY TIME : Displays the current play time  
REMAIN TIME : Displays the remaining play time  
REMAIN MEMORY : Displays the remaining memory  
BIT RATE : Displays the wave bit rate that is being played  
Use the  
,
buttons to set the Backlight “ON” time.  
BACKLIGHT TIME  
15 sec  
The setting range for Backlight-On Time is 0 to 30  
seconds.  
When set to Always On, the backlight stays on  
continuously.  
CONTRAST  
Use the  
,
buttons to set the Contrast.  
CONTRAST  
The setting range for the contrast, which adjusts the  
brightness of the screen, is from 0 to 15.  
11  
Note  
The backlight does not illuminate when the residual battery level is insufficient.  
50  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t t in g t h e En viro n m e n t  
ENCODE BIT RATE  
Use the  
,
buttons to set the desired MP3  
SOUND CONTROL  
ENCODE BIT RATE  
96 kbps  
encoding bit rate.  
You can set the desired bit rate to 64kbps, 96kbps or  
128kbps when doing MP3 encoding.  
Select SOUND in ENVIRONMENT.  
WOW LEVEL  
BEEP ON/OFF  
The levels of SRS and TRUBASS  
Use the  
,
buttons to set the BEEP mode.  
can be adjusted.  
SRS LEVEL  
8
TRUBASS LEVEL  
BEEP ON/OFF  
BEEP ON : A beep sounds each time a button is  
pressed.  
Use the  
,
buttons to select the  
Level  
8
Level  
level you want.  
ON  
BEEP OFF : No beep sounds when a button is pressed.  
The level for SRS and TRUBASS can  
OFF  
each be set within the range of 0 to 10.  
DEFAULT VOLUME  
If OPTIMIZATION is selected, the SRS function is  
optimized to the connected device.  
OPTIMIZATION  
Use the  
,
buttons to set the DEFAULT VOLUME.  
EARPHONE  
HEADPHONE  
CARPACK  
Set the desired device to earphone, headphone,  
speaker or carpack (car cassette adapter)  
It is possible to set the default volume to a value  
between 0 and 40. If the power is turned on again after  
having adjusted the volume above the default value,  
music is played at the default volume.  
DEFAULT VOLUME  
22  
by using the  
,
buttons.  
If the power is turned on again after the volume was set to  
within the default value, the music is replayed at the  
previously played volume.  
52  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t t in g t h e En viro n m e n t  
Us in g Na vig a t io n  
Up to 256 files can be searched for each folder.  
Setting Additional Regional Functions  
Press and hold the  
button.  
Select COUNTRY in SETTING menu.  
1
NAVIGATION  
The file that is currently being played is shown.  
EXIT  
001 : Track 1.mp3  
002 : Track 2.mp3  
LANGUAGE  
Use the  
,
button to select the desired menu  
LANGUAGE  
language from among nine languages.  
The menu is shown in the selected language.  
SETTING, ENVIRONMENT, COUNTRY and  
LANGUAGE are shown only in English.  
After using the  
,
button to move to NAVIGATION, press the  
button.  
2
ITALIAN  
If EXIT is selected, you can move to another folder.  
JAPANESE  
KOREAN  
NAVIGATION  
EXIT  
MUSIC  
Love You  
NAVIGATION  
NAVIGATION  
EXIT  
002:Track 2.MP3  
EXIT  
001:Track 1.MP3  
002:Track 2.MP3  
UNIT  
001:Track 1.MP3  
Use the  
,
button to select kg/m or lb/ft as the  
UNIT  
measurement units.  
EXIT  
kg/m  
lb/ft  
Select the file or folder that you want to play.  
3
,
: When entering a folder or when playing a life, when playing a file.  
: When moving to a higher-level folder. When leaving NAVIGATION mode.  
: When moving to a file or folder in the same directory.  
,
54  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t t in g FM  
Us in g S p o rt s Fu n c t io n  
Caution when measuring your heart rate  
Automatic Storage of a Frequency  
- Don’t press too hard when placing your finger on the sensor.  
Press and hold the  
button while in FM Mode.  
- Don’t move your finger during measurement.  
1
2
FM SETTING is shown.  
After moving to AUTO PRESET using the  
button, press the button.  
,
Setting the User  
07:32AM  
Frequencies within the range of 87.5MHz to  
108MHz are automatically selected and stored.  
Frequencies are automatically stored,  
starting from 1.  
91.90MHz  
Before using the sports functions select the user.  
FM Scan  
Press the Sports Function Select  
button.  
1
2
PROFILE  
EXIT  
Select PROFILE in SPORTS FUNCTION.  
TRY IT  
Searching Stored Frequencies  
Press and hold the  
button while in FM Mode.  
1
2
Select a user ID registered on the PC or TRY IT  
and set the age, sex, height and weight  
of the user.  
FM SETTING is shown.  
3
4
EDIT PROFILE  
NAME  
AGE  
: GUEST  
: 20  
Press the  
button after using the  
,
buttons  
FM CHANNEL  
to move to the desired FM CHANNEL.  
CH1 95.9 MHz  
CH2 91.9 MHz  
CH3 89.1 MHz  
GENDER : MALE  
Select CREATE after the setting is complete.  
Note  
Note  
You can store up to 20 frequencies.  
When measuring after selecting TRY IT, data is not saved.  
56  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Us in g S p o rt s Fu n c t io n  
Measuring Calories Consumed  
Measuring Heartrate  
Measure your heart rate before and after exercise in order  
to find out the calories burned.  
CALORIE COUNTER  
Press the Sports Function Select  
button.  
USER  
Try It  
1
2
END  
CALORIE  
Before starting exercise, press the Sports Function  
1st Check  
1
2
Select  
button.  
Press the  
button in SPORTS FUNCTION  
HEART RATE  
USER  
and select HEART RATE MONITOR.  
Select CALORIE COUNTER in SPORTS FUNCTION.  
CALORIE COUNTER  
The selected user and whether a  
Try It  
Place your finger  
on sensor and  
press button  
Shows the selected user and whether or not  
measurement has started will be shown.  
measurement has started.  
After placing your finger on the sensor on the  
HEART RATE  
3 top of the device, press the  
button.  
Place your finger  
on sensor and  
press button  
CALORIE COUNTER  
Measuring  
82bpm  
Measurement of heart rate starts.  
When the heart rate measurement finishes, the  
heartrate that was measured is saved automatically  
and a “ ” indicator is shown in the display window.  
After putting your finger on the sensor on the  
3
HEART RATE  
Measuring  
top of the device, press the  
button.  
Measure your heart rate one more time after finishing  
82bpm  
4 your exercise as in #2 and #3 above.  
Heart rate measurement starts.  
When measurement is complete,  
the heart rate is shown on the screen.  
Shows the calories consumed by your exercise.  
The calories are shown in kcal units.  
HEART RATE  
If you want to save the data, select CREATE.  
S
72  
E
101  
5
082  
The measured data is saved.  
58  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Us in g S p o rt s Fu n c t io n  
Measuring Lap Time  
Checking the Database  
You can measure the user’s interval time when exercising,  
such as when jogging or running a marathon.  
Press the Sports Function Select  
button.  
Press the Sports Function Select  
button twice.  
1
2
3
1
2
VIEW CALORIE  
72  
CALORIE  
03.01.01  
Shows the STOP WATCH.  
Select DATABASE in SPORTS FUNCTION.  
S
E
T
101  
576  
12:07  
:
D
To see the consumed calories measured,  
select VIEW CALORIES. To see the heart rate,  
select VIEW HEART RATE.  
Press the ENC/NAVI. button.  
VIEW HEART RATE  
HEART RATE  
Time measurement starts.  
: 96  
Shows the most recently measured data.  
DATE  
TIME  
: 03.01.01  
: 12:07  
Press the  
measurement.  
button during time  
3
STOP WATCH function  
“LAP” is shown and the lap time is recorded every  
time the button is pressed.  
A maximum of nine lap times can be recorded.  
Press the button to record up to  
Press the Sports Function Select  
button twice.  
1
Shows the STOP WATCH.  
nine lap times and then press the  
button to stop.  
The nine lap times and ending time are shown.  
Press the ENC/NAVI. button.  
2
3
Time measurement starts.  
Press the ENC/NAVI. button one more time.  
The time measurement finishes.  
60  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU Ta b le  
Use the  
,
button to navigate and then select using the  
button.  
62  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tro u b le s h o o t in g  
The software doesn’t work  
The buttons do not work.  
Refer to the recommended PC specifications.  
Check the Hold switch setting.  
Press the RESET hole on the side of main unit with pin smaller than the hole.  
The yepp does not work and the LCD displays nothing.  
Check the condition of the rechargable battery.  
The yepp keeps turning off.  
Press the RESET hole on the side of the main unit with a pin.  
If a problem continues after you reset the main unit, try to use after formatting.  
In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings).  
Check to see if there are files saved in it.  
Since format is not supported in PC, make sure to format using the Format function in the menu  
of main unit.  
Something is wrong with the play time displayed during Play mode.  
In PLAY mode, music is not played after pressing the  
button  
The “VBR SONG” message is displayed while VBR (Variable Bit Rate) files are playing.  
Verify that the device is currently set to Music mode.  
Check to see if MP3 or WMA files are saved in the built-in memory.  
Check to see if the HOLD switch is locked.  
LCD window is dark  
Check Contrast.  
Check if the REC button is on.  
Strange characters are displayed on the screen during playback.  
Files cannot be downloaded.  
Change the language setting in the menu.  
Check the condition of the rechargable battery.  
Check the connection between yepp and computer.  
Check and/or replace the battery, turn on the yepp's power.  
External case of yepp gets dirty.  
Wipe out with eraser or wet towel after squeezing out moisture.  
Backlight does not work.  
Check the backlight setup.  
When the current and voltage of the rechargeable battery are low,  
the backlight automatically stays off in order to play longer.  
64  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S p e c ific a t io n s  
MEMO  
Model  
Built-in Memory capacity  
Voltage  
YP-60  
128MB(YP-60 H)/256MB(YP-60 V)/512MB(YP-60 X)/1GB(YP-60 Z)  
3.7V (Li-polymer battery)  
Playing time  
Lasts up to 15hours (MP3 128Kbps, Vol level 20)  
Recharge time  
Approximately three hours.  
Maximom number of files that can be saved  
Dimensions/Weight  
Case  
Up to 256 files (per folder).  
39X93X17mm/47g (Battery included)  
Plastic  
Noise Ratio  
80dB with 20KHz LPF  
Earphones Jack Output Power  
Output Frequency Range  
Operating Temperature Range  
FM Frequency  
6mW(Max 10mW)/CH (16 )  
20Hz~20KHz  
-5 ~ +35˚C(23~95˚F)  
87.50 ~ 108.00 MHz  
FM Signal to Noise Ratio  
FM T.H.D  
50dB  
1%  
FM Useable Sensitiivity  
10dB  
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)  
WMA (64Kbps ~ 192Kbps, 32KHz, 44.1KHz, 48KHz)  
File Support  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cordless Telephone ET 1105 User Guide
Radio Shack Speaker 40 1024A User Guide
RCA MP3 Player M4004 User Guide
Rolls Stereo Amplifier MA2152 User Guide
Runco Projector VX 60 960p User Guide
Russell Hobbs Microwave Oven RHM1712 User Guide
Ryobi Trimmer PLT3043S User Guide
Sabrent Computer Drive USBDSC5 User Guide
San Jose Navigation GPS Receiver BT 48 User Guide
Senco Power Screwdriver DS205 14V User Guide