SIR-T451
DIGITAL TV SET TOP BOX
Samsung Electronics America inc.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
.............
Owner’s
Instructions
Made under one or more of the following US patents;
6,480,239; 6,243,431; 6,192,090; 6,184,938; 6,133,964; 5,659,372; 5,479,449
DownloadMfroFm6W8-w0w0.3S3o5mAan-0ua0ls.com. All Manuals Search And Download.
Warning! Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part of this
product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of
the building as close to the point of cable entry as practical.
Caution: FCC regulations state that any unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and
fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche
dans la borne correspondante de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of
copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording
in whole or in part may be in violation of these rights.
Warning-To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung Digital TV receiver represents the latest in DTV
IRD technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities,
making it one of the best products in its class. We are proud to offer you a product that will provide
convenient, dependable service and enjoyment for years to come.
Important Safety Information
Always be careful when using your product. To reduce the risk of fire, electrical shock, and other
injuries, keep these safety precautions in mind when installing, using, and
maintaining your machine.
•
•
•
•
•
Read all safety and operating instructions before operating your product.
Keep the safety and operating instructions for future reference.
Heed all warnings on the product receiver and in the operating instructions.
Follow all operating and use instructions.
Unplug the product from the wall outlet before cleaning. Use a damp cloth; do not use liquid or
aerosol cleaners.
•
•
•
Never add any attachments and/ or equipment without approval of the manufacturer. Such addi-
tions can increase the risk of fire, electric shock, or other personal injury.
Do not use the product where contact with or immersion in water is a possibility, such as near
bath tubs, sinks, washing machines, swimming pools, etc.
Do not place the product on an unstable cart, stand, tripod, bracket,
or table where it can fall. A falling product can cause serious injury to
a child or adult, and serious damage to the appliance. Use only with
a cart, stand, tripod, bracket, or table recommended by the manufac-
turer or sold with the product. Follow the manufacturer’s instructions
when mounting the unit, and use a mounting accessory recommended
by the manufacturer. Move the product and cart with care. Quick
stops, excessive force, and uneven surfaces can make the unit and
cart unsteady and likely to overturn.
•
Provide ventilation for the product. The unit is designed with slots in the cabinet for ventilation to
protect it from overheating. Do not block these openings with any object, and do not place the
product on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat reg-
ister. If you place the product on a rack or bookcase, ensure that there is adequate ventilation
and that you’ve followed the manufacturer’s instructions for mounting.
•
•
Operate your product only from the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult your appliance dealer or local
power company.
Use only a grounded or polarized outlet. For your safety, this product is equipped with a polar-
ized alternating current line plug having one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug still does not fit, contact your electrician to replace your outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Protect the power cord. Power supply cords should be routed so that they won’t be walked on or
pinched by objects placed on or against them. Pay particular attention to cords at plugs, conve-
nience receptacles, and the point where they exit from the unit.
Unplug the product from the wall outlet and disconnect the antenna or cable system during a
lightning storm or when left unattended and unused for long periods of time. This will prevent
damage to the unit due to lightning and power-line surges.
Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of
overhead power lines or other electric light or power circuits or where it can fall into such power
lines or circuits. When installing an outside antenna system, be extremely careful to keep from
touching the power lines or circuits. Contact with such lines can be fatal.
•
•
•
Do not overload the wall outlet or extension cords. Overloading can result in fire or electric
shock.
Do not insert anything through the openings in the unit, where they can touch dangerous voltage
points or damage parts. Never spill liquid of any kind on the product.
Ground outdoor antennas. If an outside antenna is con-
nected to the product, be sure the antenna is grounded so
EXAMPLE OF
ANTENNA GROUNDING
ANTENNA
LEAD IN WIRE
as to provide some protection against voltage surges and
built-up static charges. Section 810 of the National Elec-
trical Code, ANSI/ NFPA No.70-1984, provides informa-
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING
EQUIPMENT
CONDUCTORS
tion about proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna dis-
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
charge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrode.
NEC — NATIONAL ELECTRICAL CODE
•
Do not attempt to service the product yourself. Refer all servicing to qualified service personnel.
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the product has been exposed to rain or water
- if the product does not operate normally by following the operating instructions
- if the product has been dropped or the cabinet has been damaged
- when the product exhibits a distinct change in performance
•
•
•
If you make adjustments yourself, adjust only those controls that are covered by the operating
instructions. Adjusting other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal.
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in additional damage to the unit.
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in a safe operating condition.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.
This television receiver provides display of television closed captioning in accordance with
§15.119 of the FCC rules.
NOTES
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment dose cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connect-
ed.
• Consult the dealer or an experienced radio/TV technician for help.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
A Guide to Digital TV
What is Digital Television?
Digital television (DTV) is a new way of transmitting high quality video and audio to your
TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digi-
tal surround audio, and new services such as multicasting (transmitting more than one pro-
gram on the same TV channel) and datacasting (providing electronic program guides and
interactive television). Several of these services can be combined into a single digital
broadcast.
Digital Television Services
Digital Picture Quality
DTV programs are transmitted in two different formats. The first is Standard Definition
Television (SDTV) and the second is High Definition Television (HDTV).
SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p)
video. 480i programs are essentially a digital version of our current analog TV programs,
while the 480p format offers improved image detail over 480i. Some 480p programs are
broadcast in widescreen and are comparable to progressive-scan DVD movies in image
quality.
HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive
(720p). Both HDTV formats are always broadcast in widescreen, and both offer much
higher picture quality than SDTV.
Dolby Digital Sound
With DTV, you can listen to a variety of Dolby Digital audio formats from Dolby Digital 2.0
to Dolby Digital 5.1 using you home audio system. Many HDTV programs are now broad-
cast with Dolby Digital 5.1 soundtracks.
Interactive Communications and Datacasting
DTV will allow you to interact with your television; choosing programs from a detailed pro-
gram guide, ordering products on-line while watching TV, and accessing ancillary data
about a program.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
How to View Digital Television
There are three ways to watch DTV. The first is to use an integrated digital TV; one with a
built-in digital television tuner. The second is to connect an external DTV set-top receiver to
a DTV-ready television or monitor. This type of TV or monitor will have wideband compo-
nent video and stereo audio inputs. You can also watch DTV signals with personal comput-
er (PC) tuner cards and computer monitors.
1. Integrated TVs versus DTV-ready TVs and monitors
The advantage of an integrated DTV set is that it can tune both analog and digital TV chan-
nels at the same time. All you'll need to do is add an external antenna and you are ready
to watch DTV.
However, integrated DTV sets are not as common as DTV-ready TVs and monitors. If you
already own a DTV-ready TV with either component video, DVI or HDMI inputs, you can
enjoy DTV broadcsts by simply adding a low-cost DTV set-top receiver and antenna.
2. Using your existing analog TV set
Your analog TV set can be used to view down-converted DTV broadcasts by connecting the
DTV set-top receiver to your composite (yellow RCA jack) or S-video (black circular jack)
AV inputs, as well as connecting stereo audio inputs. While the picture quality won't be as
good as you'd see on a DTV-ready TV set, it will be as good or slightly better than analog
TV broadcasts.
3. Using a personal computer and monitor
There are plug-in cards available that will receive and display DTV broadcasts on your
computer monitor. In addition, many computer monitors will display one or more of the
DTV program formats directly. The most compatible format is 480p, which is similar to the
VGA (640x480 pixel) computer display standard. You may be able to watch DTV broad-
casts by connecting a computer monitor to the 15-pin jack on the rear of the set-top DTV
receiver.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Q&A
1. Is the antenna I use for existing TV reception good enough for DTV?
Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and
works well with many existing TV antennas. However, DTV broadcast channel assignments
are different than analog channels. You should find out whether your local DTV broadcasts
are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different anten-
na.
If your DTV channels are on UHF and you already get good UHF reception, your present
antenna may work fine. The same holds true for VHF DTV reception. Note that in some
markets, both VHF and UHF channels are used for DTV broadcasts.
You can find out the latest DTV channel assignments for your area by browsing selected
2. How difficult is it to receive DTV signals indoors?
This depends on whether your local DTV stations are running full power or not and how
close your location is to the transmission tower. DTV receivers do not require as much sig-
nal as analog TV receivers to produce high-quality images and sound.
Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and
audio data is decoded at the same quality it was originally encoded for broadcast. This is
a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy
audio.
3. How can I connect an antenna in my townhouse, co-operative apartment, condominium,
or apartment?
The Federal Communications Commission's OTARD Rule (part of the Telecommunications
Act of 1996) allows residents of condominiums, townhouse, or members of neighborhood
associations to put up outside antennas for reception of broadcast TV signals as long as
those antennas are not located in common areas and are no more than 12' in height.
Residents of rental units (apartments, etc) are not covered by the OTARD rules and will
have to use indoor antennas to receive DTV broadcasts. It is possible that the landlord of
an apartment complex can provide broadcast DTV signals via a master TV antenna system
to each apartment.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Q&A
4. Can I connect my DTV set-top receiver to my cable TV service?
Cable TV systems use a different method for transmitting digital TV programs that is current-
ly incompatible with broadcast DTV set-top receivers. So you will still need to use an out-
door or indoor antenna to receive OTA broadcast DTV programs.
The good news is that you won’t have to pay a monthly or per-program charge to watch
OTA DTV and HDTV programs. They’re free, unlike subscription satellite TV or premium
cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear, sharp
widescreen images and high-quality audio.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Chapter 1: Connecting the Set Top Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Front Panel Controls and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connecting the Set-Top Box to a TV Set . . . . . . . . . . . . . . . . . . . . .14
Connecting the Set-Top Box to a Device with a DVI jack . . . . . . . . .16
Connecting the Set-Top Box to a Computer Monitor . . . . . . . . . . . .17
Connecting an Audio Component . . . . . . . . . . . . . . . . . . . . . . . . .17
Chapter 2: Remote Control and On-Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Reviewing the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Programming the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .20
The On-Screen Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using the On-screen Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Viewing the Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Chapter 3: Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Memorizing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Adding and Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .25
How to Set Your Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . .26
Checking the Digital-Signal Reception . . . . . . . . . . . . . . . . . . . . . . .27
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Setting the Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Chapter 4: Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Changing the Screen Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Choosing a Digital Sound Format (Dolby Digital or PCM) . . . . . . . .33
Changing the Position of the Image . . . . . . . . . . . . . . . . . . . . . . . .34
Choosing a Multitrack Language . . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting Up Digital Captions (On-Screen Text Messages) . . . . . . . . . .36
Rating Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Electronic Program Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Using the EPG (Electronic Program Guide) . . . . . . . . . . . . . . . . . . .42
Viewing Information about One Channel . . . . . . . . . . . . . . . . . . . .43
Viewing Information about Channels . . . . . . . . . . . . . . . . . . . . . . .44
To view the Remind List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Programming the Remote Control for Other Components . . . . . . . . .46
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Front Panel Controls and LEDs
Œ
´
ˇ
¨ ˆ
Ø
∏
Œ
Press to turn the power on or off.
ˆ MENU
Press to display the on-screen menus or to switch back
to the previous menu screen that was display.
´ STANDBY
Turns your receiver Standby.
Ø ENTER
ˇ
Press to activate a selection when using the on-screen
menus.
Display the broadcasting status. When the STB detect
the broadcasting signal, turn on the light of HDTV logo.
∏ Menu Up/Down/Left/Right
Use to change channels or to move highlight (when
using the on-screen menus).
¨ EXIT
Press to completely exit from the on-screen menus.
NOTES
In this instruction book, the terms “Set-Top Box” and “DTV” are equivalent.
Both terms appear in this instruction book, on the remote control markings, and
on the On-Screen display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Rear Panel Jacks
ΠANT./CABLE IN
Ô DTV OUT (RGB)
Connect the AIR antenna or CATV antenna here. Connect
cable in the event that a local cable provider is passing
through 8VSB on their system.
You can connect RGB to a TV, computer monitor, or
another video component input. 1080i, 720p, 480p and
480i are available by setting the RESOLUTION SELECT
switch. This output port supports the only SD and HD out-
put.
´ ANT.OUT
ˇ DOLBY DIGITAL OUT (OPTICAL)
Use to connect the Digital Audio Input of your TV or
audio component.
DTV OUT SELECT
b
r
Use to select Y,P ,P /RGB,DVI according to the video
output from the TV or monitor.
¨ S-VIDEO
Ò RESOLUTION SELECT
Provides good picture quality. If your TV or monitor has
S-Video capability, use this jack along with the Video
jacks to connect the Set-Top Box.
Switches between 1080i (interlaced scanning), 720p
(progressive scanning), 480p (progressive scanning),
and 480i (interlaced scanning) formats.
Switches the DTV Component outputs to the following
formats:
Use this output for conventional TV sets that a S-Video
input but no component video inputs. This output port
supports the only SD output.
• 1080i (Interlaced Scanning)
ˆ VIDEO OUT
Use this setting for an HDTV Ready 16 X 9
(WIDESCREEN) aspect ratio TV monitor that can handle
the 1080i video output format.
If your TV or monitor has Audio/Video capability, connect
this jack to the AV Input jack on your TV or monitor using
an Audio/Video cable.
• 720p (Progressive Scanning)
Use this output for conventional TV sets that do not have
S-Video or component video inputs. This output port sup-
ports the only SD output.
Use this setting for an HDTV Ready 16 X 9
(WIDESCREEN) aspect ratio TV monitor that can handle
the 720p video output format.
• 480p (Progressive Scanning)
b
r
Ø DTV OUT COMPONENT (Y, P , P format)
Use this setting for an Digital Ready 4 X 3 aspect
ratio TV monitor with Progressive Scan DTV ready
component video inputs that can handle the 480p
video output format.
b
r
You can connect Y,P ,P to a TV, computer monitor, or
b
r
another video component input. As with DTV OUT (Y,P ,P
format), 1080i, 720p, and 480p are available by setting
the RESOLUTION SELECT switch. This output port supports
the only SD and HD output.
The TV monitor may be labeled Enhanced Definition
or Progressive Scan, but not Wide Screen.
• 480i (Interlaced Scanning).
Use this setting for a conventional TV with regular
video, S-Video, or component video inputs.
∏ Lt/Rt ANALOG-AUDIO OUTPUTS
Connect these terminals to the analog audio inputs of a
TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a
separate audio component.
NOTE
” DOLBY DIGITAL OUTPUT (COAXIAL)
The use of 1080i on a 4 X 3 monitor or the use of 480p on a
16 X 9 monitor may cause Aspect Ratio picture distortion.
720p will only work on selected HDTV Ready TVs. Check the TV
monitor's owner's manual to verify this capability. 480i will
only work on conventional TV sets.
Use to connect the Digital Audio Input of your TV.
’ Service Jack
For service only.
˝ DVI OUT
Use to connect a device equipped with DVI interface. DVI
OUT supports HDCP function. (See Notes on page 17.)
This output port supports the only SD and HD output.
Subscription cable services require service-specific require-
ments for viewing.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Connecting Antennas
This section shows how to connect a cable TV with or without a cable box, and how to
connect an indoor or outdoor antenna.
Indoor/Outdoor Antenna: You may
need a 75Ω adaptor or a combiner, as
shown in the illustration to the right.
1
Cable TV without a Cable Box: If you
have a cable TV and do not use a cable box,
connect the cable to ANT/ CABLE IN on the
rear of the Set-Top Box.
2
Cable TV with a Cable Box: If you have
a cable box, connect as shown in the
illustration to the right.
3
NOTES
• If your antenna has separate leads for VHF/UHF signals, you will need to purchase a
combiner and connect it as shown in illustration above.
• The Set-Top Box can receive DTV signals in the event that a local cable provider is passing
8VSB through on their system.(8VSB is the RF modulation format utilized by the DTV(ATSC)
digital television standard to transmit digital bits over the airwaves to the home consumer.)
• When Receiving Digital Cable Signal : If your cable service signal does not comply
with the ATSC requirement, this product may not operate properly.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Connecting the Set-Top Box to a TV Set
Plasma Display Panel (PDP)
Connect an antenna cable to the ANT/ CABLE
IN jacks on the Set-Top Box.
1
Connect the Video Cables.
2
b
r
YP P format: Connect a Component
video cable between the DTV OUT(COM-
PONENT) jacks on the Set-Top Box and the
DTV INPUT jacks on the PDP.
RGB format: Connect an RGB video moni-
tor cable between the DTV OUT (RGB) jack
on the Set-Top Box and the RGB VIDEO IN
jack on the PDP.
Connect the Audio Cables
Connect an audio cable between the Lt/ Rt AUDIO OUT jacks on the Set-Top Box and the L/ R
AUDIO IN jacks on the PDP.
3
NOTE
You must select the Y,Pb,Pr or RGB(DVI) with the 'DTV Output Select' switch at the rear of Set-Top Box
for the PDP INPUT jack.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Digital Ready TV or Normal TV
Connect an antenna cable to the
ANT/ CABLE IN jacks on the SetTop Box.
1
2
Connect the Video Cables.
Digital Ready TV: Connect a compo-
nent video cable between the DTV OUT
b
r
COMPONENT (Y,P ,P ) jacks on the Set-
Top Box and the DTV INPUT jacks on the
TV.
Normal TV: Connect a video cable
between the VIDEO OUT jack on the Set-
Top Box and the VIDEO INPUT jack on the
TV. Or, connect an S-Video cable between
the S-VIDEO OUTPUT jack on the Set-Top
Box and the S-VIDEO INPUT jack on the
TV.
<Digital Ready TV>
Connect the Audio Cables
3
Digital Ready TV: Connect an audio
cable between the DOLBY DIGITAL OUT
(optical or coaxial) jack on the Set-Top Box
and the Dolby Digital In jack on the TV.
Or, connect an audio cable between the
Lt/ Rt AUDIO OUT jacks on the Set-Top Box
and the L/ R AUDIO IN jacks on the TV.
< Normal TV>
Normal TV: Connect an audio cable
between the L/ R AUDIO OUT jacks on the
Set-Top Box and the L/ R AUDIO IN jacks
on the TV.
NOTES
• The TV set must be “digital compatible” (i.e., it must have appropriate audio and digital video
terminals).
• If 1080i, 720p, or 480p (DIGITAL) is selected with the RESOLUTION SELECT switch on the Set-Top
Box, the On-Screen Display menus will not be supported for VIDEO OUT and S-VIDEO OUT. The
OSD menus for VIDEO OUT and S-VIDEO OUT are supported only when 480i (ANALOG) is
selected.
b
r
b
r
• You must set “DTV OUT SELECT (Y,P ,P /RGB, DVI)” for Y,P ,P interface.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Connecting the Set-Top Box to a Device with a DVI jack
Connect a DVI cable between the
DVI OUT jack on the Set-Top Box
and the DVI IN jack on the DVI device
(TV, monitor).
1
Connect audio cables between the Lt/ Rt
AUDIO OUT jacks on the Set-Top Box
and the L/ R AUDIO IN jacks on the DVI
device.
2
NOTES
This Set-Top Box supports HDCP technology. HDCP stands for High-bandwidth Digital Content
Protection, which provides secure data transmission for high definition video.
Only DVI-HDCP supported devices can be connected.
•
•
•
A 25-pin DVI-D jack is used, so only digital signals can be viewed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER ONE
Connecting The Set Top Box
1
Connecting the Set-Top Box to a Computer Monitor
Connect an antenna cable to the ANT/ CABLE
IN jacks on the Set-Top Box.
1
Connect a computer video monitor cable
between the DTV OUT (RGB) jack
on the Set-Top Box and the VIDEO IN jack on
the computer monitor.
2
Connect an audio cable between the
Lt/ Rt AUDIO OUT jacks on the Set-Top
Box and the L/ R AUDIO IN jacks on the
computer monitor.
3
NOTE
b
r
You must set “DTV OUT SELECT (YP P /RGB,DVI)” for RGB interface.
, ,
Connecting an Audio Component
There are many types of audio systems on the
market today.
A simplified illustration of an audio system is
shown to the right. For more information, see
your audio system owner’s manual.
If your audio system has :
A coaxial digital audio input, connect the audio system to the DOLBY DIGITAL OUT (COAXIAL) jack on the Set-Top Box.
An optical digital audio input, connect the audio system to the DOLBY DIGITAL OUT (OPTICAL) jack on the Set-Top Box.
Be certain to remove the black cover from the optical output before inserting the cable.
Both coaxial and optical digital audio inputs, SAMSUNG recommends you use the optical digital output.
Do not connect both optical and coaxial cables. This may damage your audio system.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
Reviewing the Remote Control
The Set-Top Box remote control and on-screen menu system work together to operate the
Set-Top Box as simply as possible. Understanding the remote control buttons and the menus
allows you to operate the Set-Top Box with ease.
If you need some assistance while using the remote control and the menus, the provided
on-screen help feature will be helpful. See “Using the On-screen Help” on page 22.
Œ
Press to turn the power on or off.
´ Channel Number Buttons
Press to directly tune to a particular channel.
ˇ +100
Press to select the cable TV channels over 100.
¨ MUTE
Mute or unmute the TV audio.
ˆ Volume +/-
Adjust the volume level of your TV.
Ø GUIDE
Press to display the on-screen Electronic Program Guide (EPG).
∏ Menu
Press to display the on-screen menus or to switch back to the previous menu screen that was
displayed.
” ADD/DEL
Press to add or delete channels.
’ ASPECT
Press to change the screen format according to the screen aspect ratio and the input signal for-
mat.
˝ FAV.CH (Favorite Channel)
Press to switch among your favorite channels.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
Ô PRE-CH
Press to return to the revious channel you viewed.
INFO.
Press to display information about the current box settings and program: Channel number,
Time, Program title, Program duration, Caption, Rating control, Digital picture grade, and
MTS language. Press to return to the revious channel you viewed.
Ò Channel
,
(Channel Up and Down)
Press to change channels.
Ú Back
Press to return to the previous menu.
Æ EXIT
Press to completely exit from the on-screen menus..
ı Menu UP/DOWN/LEFT/RIGHT
Use to move the on-screen pointer up, down, left, or right.
˜ ENTER
While using the on-screen menus, press ENTER to activate (or change) a particular item.
¯ MTS (Multitrack Sound)
Press to select the available “multitracks.” (Depending on the particular broadcast, one or
more foreign language translations might be available.)
˘ CAPTION
When a digital signal is received, Service1, Service2,... or Service6 can be selected.
When an analog signal is received, CC1, CC2, CC3, or CC4 can be selected.
¿ SET
Use to program the remote control for other components. (See “Programming the Remote Control for Other Components” on
page 46.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
Installing the Batteries
Press and remove the battery cover on the back of the remote control.
Put two AAA batteries into the compartment and replace the battery cover.
➡
➡
Programming the Remote Control
To program the remote control to operate a TV, see “Programming the Remote Control
for Other Components” (page 46).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
The On-Screen Menu System
Using the Menu UP/ DOWN/ LEFT/ RIGHT buttons in
the center of the remote control, you can move
between the menus.
To enter a particular menu, press ENTER. The menu
system has three different levels. The four icons on the
left side of the screen are the “first level” menu: Guide,
Preference, Channel, and Setup. When you activate
one of these four icons, the on-screen display presents
a “second level” submenu (which often leads to a
“third level” submenu).
Sub-menu
SETUP
Select Screen Format
Auto Time setup
√
√
Sound Output
: Dolby D
Screen Position
√
Example:The “Setup” sub menu
Detail-menu
Screen Format
Select Screen Ratio
: 4
4:3
16:9
Choose Screen Format
Pillar Box
Full
Zoom
Example: ”Screen Format”
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
Using the On-screen Help
To turn the on-screen help on:
Press the MENU button on the remote control.
1
2
PREFERENCE
Use the Menu Up/ Down but-
tons to highlight the Preference
icon and press ENTER.
Select Favorite Channels
√
Multi-track Language
Choose Closed Captions
Set Rating Controls
: English
√
√
Help
: Off
Use the Menu Up/ Down
buttons to highlight Help
and press ENTER.
Press the Up/ Down buttons to choose “Help: On”.
Press ENTER and the on-screen help appears.
3
Use the Menu Up/ Down buttons to highlight each of the
icons and read the description of the features that each icon
represents.
REE
You can press EXIT at any time, and the menus will
disappear from the screen.
To turn the on-screen help off:
Use the Menu Up/ Down buttons to highlight the Help:Off
icon and press ENTER. The on-screen help will disappear.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER TWO
Remote Control and On-Screen Menus
2
Viewing the Information
You can quickly check the status of many of the Set-Top Box features and options by
using the INFO button.
The Info shows:
• The major channel number and the minor channel number
(if you are viewing a digital channel).
• The current time and date. See page 29.
• Program title.
• Program duration.
• The status of closed captions (if the broadcast includes
them, and if you have turned on the closed captions fea-
ture). See page 36.
• Rating control settings. See page 38.
• The digital picture grade, such as HD (High Definition) or
SD (Standard Definition).
• The audio track languages (English, Spanish, French).
See page 35.
To view Info:
Press INFO on the remote control.
To hide Info:
Press INFO again or EXIT or wait 10 seconds, and the Info will disappear.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER THREE
Operation
3
Memorizing Channels
Before you can use any of the special channel buttons (CH
, FAV.CH), the available
channels must first be scanned and memorized. This is an easy, automatic process that
typically takes two minutes. To memorize channels:
Press the MENU button on the remote control.
1
CHANNEL
Use the Menu Up/ Down buttons
Memorize Channels
√
√
√
to highlight the Channel icon and
Add & Delete Channels
2
Check Signal Strength
press ENTER.
Use the Menu Up/ Down
buttons to highlight
Memorize Channels and
press ENTER.
Memorize Channels
Use the Menu Up/ Down but-
Air
tons to select Air or Cable
3
(STD, HRC or IRC).
Press ENTER.
STD
HRC
IRC
That’s it. The Set-Top Box will automatically scan and store all
of the digital (DTV) channels that are available in your local
area.
4
5
Press EXIT when channel memorization is complete.
NOTES
The Set-Top Box MUST be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that chan-
nel directly by using the number buttons on the remote control.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER THREE
Operation
3
Adding and Deleting Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
Enter the digits of the channel to be added or deleted.
1
CHANNEL
Press the MENU button on the
Memorize Channels
√
√
√
remote control. Use the Menu
Up/ Down buttons to highlight
the Channel icon and press
ENTER.
Add & Delete Channels
Check Signal Strength
2
3
4
CHANNEL
Use the Menu Up/ Down
buttons to highlight
Add & Delete Channels
and press ENTER.
Memorize Channels
√
√
√
Add & Delete Channels
Check Signal Strength
Add & Delete Channels
Repeatedly pressing ENTER will
alternate between Add channel
(Message: “In Memory”), and
Delete channel (Message: “Not
in Memory”).
DTV 13
Not in Memory
Press ENTER to add the channel.
Add
Return
Press the number buttons
(or CH
buttons) to switch
to the appropriate channel,
and then repeat step 4. Press EXIT.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER THREE
Operation
3
How to Set Your Favorite Channels
Press the MENU button on the remote control.
1
2
PREFERENCE
Use the Menu Up/ Down buttons
to highlight the Preference icon
and press ENTER. Use the Menu
Up/ Down buttons to highlight the
Select Favorite Channels icon
and press ENTER.
Select Favorite Channels
√
Multi-track Language
Choose Closed Captions
Set Rating Controls
: English
√
√
Help
: Off
Select Favorite Channels
▲
To designate a particular channel
as a “Favorite Channel,”
highlight the channel number and
press ENTER.
For each Favorite Channel, a
yellow dot icon will appear next
to the channel number.
Return
DTV 91
TV 92
SBS Sports
TBS
3
Select All
Clear All
DTV 93-001 HBO
DTV 93
CATV 95
DTV 96
HBO2
USA
ABC
▲
(When more than six favorite
channels exist, press the arrow
buttons to add channels.)
Press EXIT.
4
You can now jump from one favorite channel to another by pressing the FAV.CH button.
5
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER THREE
Operation
3
Checking the Digital-Signal Reception
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel. But you can adjust
your antenna to improve the reception of available digital channels.
Press the MENU button on the remote control.
1
CHANNEL
Use the Menu Up/ Down
Memorize Channels
√
√
√
buttons to highlight the
Channel icon and
press ENTER.
Add & Delete Channels
Check Signal Strength
2
3
4
CHANNEL
Use the Menu Up/ Down
buttons to highlight the
Check Signal Strength
and press ENTER.
Memorize Channels
√
√
√
Add & Delete Channels
Check Signal Strength
Check signal strenght
If the signal strength meter
indicates that the signal is
weak, physically adjust your
antenna to increase the signal
strength. Continue to adjust
the antenna until you find the
best position with the
strongest signal.
When you have finished adjusting your antenna, press EXIT.
5
NOTE
“No Signal” may appear on the screen depending on the broadcast station conditions,
even if an incoming broadcast signal exists.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTERR THREEE
OOppeerraattiioonn
3
Changing Channels
Number buttons
Press the number buttons (0 – 9) to enter channel numbers.
NOTES
When the channel you selected contains one or more “minor” chan-
nels, the list of the channels will be displayed on the screen. To select
one of them, position the highlight on the channel you want using CH
,
and press ENTER.
PRE-CH button
Press to return to the previous channel you viewed. For exam-
ple, if the box is tuned to channel 55 and then you change to
channel 56, pressing PRE-CH will return to channel 55.
FAV.CH button
Press to switch among your favorite channels. (See page 26)
CH and button
Press CH
or
to move up or down to the next available
channel. Press and hold CH
the channels.
or
to cycle quickly through
NOTES
You must first complete the “Memorize Channels” procedure (See page
24) before you can use the CH
and
, FAV.CH buttons.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTERTHREE
Operation
3
Setting the Time and Date
First, select a channel that has a Digital Signal.
Press the MENU button on the remote control.
1
2
SETUP
Select Screen Format
Use the Menu Up/ Down
buttons to highlight the Setup
icon and press ENTER.
Use the Menu Up/ Down
buttons to highlight Auto
Time setup and press ENTER.
√
√
Auto Time setup
Sound Output
: Dolby D
Screen Position
√
Time Setup
You will be asked if your
Do you follow Daylight Saving Time?
local area observes Daylight
Saving Time. Use the Menu
Up/ Down buttons to highlight
Yes or No, and press ENTER.
3
4
Yes
No
Time Setup
Use the Menu Up/ Down/
Left/ Right buttons to highlight
the time zone for your local
area (and to move the high-
light to the appropriate time
zone on the map of the
United States).
Select the time zone in which you live
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Press ENTER.
That’s it. As you have received a digital signal, the time will be
set automatically.
Press EXIT.
5
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Changing the Screen Format
Your selection in the Screen Format menu depends on the type of TV or monitor you are
using with your Set-Top Box.
Press the MENU button on the remote control.
1
SETUP
Use the Menu Up/ Down
Select Screen Format
Auto Time setup
√
buttons to highlight the Setup
icon, then use the Menu
Up/ Down buttons to highlight
Select Screen Format.
Press ENTER.
√
2
Sound Output
: Dolby D
Screen Position
√
Screen Format
Press ENTER and select Select
Screen Ratio using the Menu
Up/ Down buttons.
Select Screen Ratio
:
4:3
16:9
Choose Screen Format
3
Pillar Box
Full
Zoom
Screen Format
Use the Menu Up/ Down
buttons to highlight the
Choose Screen Format you
want and press ENTER.
Select Screen Ratio
: 16 : 9
4
5
Choose Screen Format
Pillar Box
Full
Zoom
Press EXIT.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Full
With a 4:3 Ratio TV or Monitor
Choose this when you want the television to
adjust the16:9 image vertically so it fills
your 4:3 screen. No blank panels will be
added, and the image is horizontally unal-
tered.
If you are using a 4:3 aspect ratio TV or
monitor and receiving an image with a
16:9 aspect ratio, you need to specify how
the image is displayed.
Letter box
Zoom
Choose this when receiving a 16:9 image
and you want to see the original wide for-
mat. Letter boxing shrinks the picture so the
entire image will fit on the screen. Blank
panels appear at the top and bottom of the
screen.
Choose this when receiving a 16:9 image
and you want the wide movie format to fill
the entire screen. Left and right portions of
the picture are cropped, or cut.
(1080i doesn’t support letter box mode.
FULL mode will be automatically selected.)
NOTE
✽ : This indicates the default format in each condition, which may be modified by user’s choice.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
With a 16:9 Ratio TV or Monitor
Full
If you are using a 16:9 aspect ratio TV or
monitor and receiving an image with a 4:3
aspect ratio, the image will be displayed at
the 4:3 aspect ratio on your monitor unless
you specify otherwise. The Screen Format
menu allows you to adjust the image
through the following options:
Choose this when you want the television to
adjust the 4:3 image horizontally so it fills
your 16:9 screen. No blank panels will be
added, and the image is vertically unal-
tered. This setting is especially useful for
viewing 4:3 formatted DVDs.
Pillar box
Zoom
Choose this when receiving a 4:3 image
and you want the on-screen appearance of
the video to be a centered picture with
blank panels on the right and left sides.
Choose this when receiving a 4:3 image
and you want to maintain the correct image
proportion. Top and bottom portions of the
picture are cropped, or cut.
NOTE
✽ : This indicates the default format in each condition, which may be modified by user's choice.
The availability of changing the Screen Format feature depends on the Resolution Select switch
setting and the current broadcasting signal format.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Choosing a Digital Sound Format (Dolby Digital or PCM)
Both analog and digital sounds can be output from the rear-panel connectors on your
Set-Top Box. The digital sound outputs are optical and coaxial connectors labeled “Dolby
Digital Output”.
After connecting an optical or a coaxial digital-audio component, you must specify the
transmission format (Dolby Digital or PCM, as appropriate to your component).
Press the MENU button on the remote control.
1
SETUP
Use the Menu Up/ Down buttons
to highlight the Setup icon and
press ENTER.
Select Screen Format
Auto Time setup
√
√
2
Sound Output
: Dolby D
Screen Position
√
Use the Menu Up/ Down buttons
to highlight the sound outpur icon
and press ENTER.
SETUP
Use the Menu Up/ Down buttons
to choose the appropriate format
(Dolby D or PCM) and press
ENTER.
Select Screen Format
Auto Time setup
√
√
3
4
Sound Output
: D
Dolby D
PCM
Screen Position
√
Press EXIT.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. c 1992-1997 Dolby Labories. All rights reserved.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Changing the Position of the Image
Adjust the position of the screen if it is not well-aligned.
Press the MENU button on the remote control.
1
2
SETUP
Select Screen Format
Use the Menu Up/ Down buttons
to highlight the Setup icon and
press ENTER.
√
√
Auto Time setup
Sound Output
: Dolby D
Screen Position
√
SETUP
Use the Menu Up/ Down button
to highlight the Screen Position
and press ENTER.
Select Screen Format
Auto Time setup
√
√
3
4
5
Sound Output
: Dolby D
Screen Position
√
Screen Position
Use the Menu Up/ Down/ Left/
Right buttons to adjust the screen
position.
Press EXIT.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Choosing a Multitrack Language
The digital-TV transmission system is capable of simultaneous transmission of many audio
tracks (for example, simultaneous translations of the program into foreign languages). The
availability of these additional “multitracks” depends upon the program. To select a multi-
track language:
Press the MENU button on the remote control.
1
PREFERENCE
Use the Menu Up/ Down
Select Favorite Channels
Multi-track Language
√
: English
√
buttons to highlight the
Preference icon and press
ENTER.
2
Choose Closed Captions
Set Rating Controls
√
Help
: Off
PREFERENCE
Use the Menu Up/ Down
buttons to highlight Multitrack
Language and press ENTER.
Select Favorite Channels
Multi-track Language
√
: English
√
3
Choose Closed Captions
Set Rating Controls
√
Help
: Off
PREFERENCE
Use the Menu Up/ Down but-
ton to choose the appropriate
language and press ENTER.
(The available languages will
vary depending on the
program.)
Select Favorite Channels
Multi-track Language
√
: E
English
4
5
Spanish
Choose Closed Captions
Set Rating Controls
French
√
Help
: Off
Press EXIT.
NOTE
You can switch between current available multitrack languages by using the MTS button
on the remote control.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Setting Up Digital Captions (On-Screen Text Messages)
The Digital Captions function operates on digital channels.
How to Activate or Deactivate the On-screen Captions
Press the MENU button on the remote control.
1
PREFERENCE
Use the Menu Up/ Down
buttons to highlight the
Preference icon and press
ENTER.
Select Favorite Channels
Multi-track Language
√
: English
√
2
3
Choose Closed Captions
Set Rating Controls
√
Help
: Off
PREFERENCE
Use the Menu Up/ Down
buttons to highlight Choose
Closed Captions and press
ENTER.
Select Favorite Channels
Multi-track Language
√
: English
√
Choose Closed Captions
Set Rating Controls
√
Help
: Off
Closed Captions
Use the Menu Up/ Down
buttons to alternate between
“On” and “Off” and press
ENTER.
Caption
: On
Caption Service
: Service1
4
5
6
Caption Display Options
Closed Captions
: On
Use the Menu Up/ Down buttons
to highlight Caption Service and
press ENTER.
Caption
Service 1
Caption Service
: S
Service 2
Caption Display Option
Service 3
Service 4
Service 5
Service 6
PREFERENCE
Use the Menu Up/ Down buttons
to highlight the Caption Display
Option and press ENTER.
Caption
: On
Caption Service
: Service1
Caption Display Options
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Closed Captions
Select the Service you want suing the Menu Up/ Down
buttons and press ENTER.
Caption
Caption Service
Caption Display Option
: On
1
Service 1
5-
: S
Service 2
Service 3
Service 4
Service 5
Service 6
Service:
This option consists of Service 1 ~ Service6.
The default is Service 1. Either the reading
level or the language may change depending
on the service option.
Caption Display Option
: Default
Select the option(Size, Style, Foreground color,
Background color, Foreground opacity or Background
opacity).
Size
1
Font style
: Default
: Default
: Default
: Default
: Default
6-
Foreground Color
Background Color
Foreground Opacity
Back ground Opacity
Return to Default
Size:
Style:
This option consists of Default, Small,
Standard, Large. The default is Standard.
This option consists of Default, Style0 ~ Style 7. You can change the font you
want. The default is Style 0.
Foreground color:
This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta,
Cyan. You can change the color of the letter. The default is White.
Background color:
This option consists of Default, White, Black,
Caption Display Option
: Default
Size
Red, Green, Blue, Yellow, Magenta,
You can change the ground color of the
caption. The default is Black.
Cyan.
Font style
: Default
Default
Foreground Color
Background Color
Foreground Opacity
Back ground Opacity
Return to Default
: D
White
: D
Black
: D
Red
: D
Green
Foreground Opacity:
This option consists of Default, Transparent,
Translucent Solid, Flashing. You can change the
opacity of the letter.
select a background box color with
caption preview.
Abc12
Background Opacity:
This option consists of Default, Transparent, Translucent Solid, Flashing.
You can change the opacity of the letter.
Return to Default:
This option sets Service, Size, Style, Foreground color, Background color,
Froeground opacity and Backgroun opacity to their default settings.
Abc12: This will appear at bottom of the screen every time each option is applied.
NOTES
• The captions availability depends on the program being broadcast.
• Each press of the CAPTION button will alternate between services available in Service1,
Service2, Service3, Service4, Service5, Service6 and OFF.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Rating Control Menu
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code
that is defined by the user).The on-screen menu will instruct you to assign a password (and
you can change it later, if necessary).
How to Change Your Password
Press the MENU button on the remote control.
1
PREFERENCE
Use the Menu Up/ Down
Select Favorite Channels
Multi-track Language
√
: English
√
buttons to highlight the
Preference icon and press
ENTER.
2
Choose Closed Captions
Set Rating Controls
√
Help
: Off
Use the Menu Up/ Down
buttons to highlight Set
Rating Controls and press ENTER.
Rating Control
Use the Menu Up/ Down
button to highlight “Change
Pin” and press ENTER.
Use the number buttons
(0 - 9) on the remote control
to enter your current pass
word.
Enter Pin
3
4
Change Pin
Change PIN
Enter Current PIN
Use the number buttons on the
remote control to enter a
changed password.
*
*
*
Enter New PIN
Confirm New PIN
Re-enter the new password to
confirm.
5
6
Your new password is now activated. Press EXIT.
NOTES
Password Error.
If you forget the password, re-do steps 1~3.
At step 3, when the display asks you to enter the current password, press the master keys INFO, 1,
8, and 2). Enter a new password and proceed with steps 5~6.
The master keys are available only in the Preference menu and don’t operate during normal viewing.
(If the display asks you to enter the password while blocked, the master keys don’t operate.)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
How to Lock Programs Using the TV (FCC) or MPAA Ratings
Press the MENU button on the remote control.
1
PREFERENCE
Use the Menu Up/ Down buttons
to highlight the Preference icon
and press ENTER.
Select Favorite Channels
Multi-track Language
√
: English
√
2
Choose Closed Captions
Set Rating Controls
√
Help
: Off
Use the Menu Up/ Down buttons
to highlight Set Rating Controls
and press ENTER.
Rating Control
Enter your password correctly.
Enter Pin
3
4
Change Pin
Rating Control
After the password is entered,
the screen will display the rating
control menu.
TV Parental Guidelines
Movice ratings
√
√
TV Parental Guidelines
This menu lists both MPAA and
TV (FCC) Parental ratings.
You can independently lock the
MPAA and TV ratings.
The locked MPAA/ TV (FCC)
ratings are indicated by the
Return
TV-Y
Allow All
Block All
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
symbol
.
Use the Menu Up/ Down/ Left/ Right buttons and the ENTER button to
activate the appropriate restrictions for either MPAA rating system or
TV (FCC) rating system.
5
6
Press EXIT.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Important Notes About Parental Locks (“P.Locks”)
Explanation of the MPAA and TV (FCC) Rating Systems:
TV (FCC) Age-Based Ratings
TV-MA Mature audiences only. This pro-
gram may contain mature themes, profane
language, graphic violence and explicit
sexual content.
TV-G General audience. It contains little
or no violence, no strong language, and lit-
tle or no sexual dialog or situations.
TV-Y7 Directed to older children. Themes
TV-14 Parents strongly cautioned. This pro- and elements in this program may include
gram may contain sophisticated themes,
sexual content, strong language and more
intense violence.
mild physical or comedic violence, or may
frighten children under the age of seven.
TV-Y All children. The themes and elements
TV-PG Parental guidance suggested. The
in this program are specifically designed
program may contain infrequent coarse lan- for a very young audience, including chil-
guage, limited violence, some suggestive
sexual dialog and situations.
dren from ages two – six.
TV (FCC) Content Category
MPAA Rating System (Movies)
V
S
L
D
FV
Violence.
G
PG
General audience. No restriction.
Sexual content.
Children under 13 should be
accompanied by an adult.
Offensive language.
Dialog...sexual innuendo.
Fantasy or cartoon violence.
PG-13 Parental guidance suggested.
Children under 13 should be
accompanied by an adult.
R
Restricted. Viewers should be 17
or older.
NC-17 Not classified. Viewers should be
17 or older.
X
NR
Adults only.
Not Rated.
* TV (FCC) ratings: The particular rating that you have selected will be locked (and indicated as a
red “L” on a blue background). Also, all of the age-based ratings will be locked within the partic-
ular group (i.e., “group 1” or “group 2”).
Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case, more
restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are auto-
matically locked as well.
* MPAA ratings: The particular rating that you have selected will be locked. In addition, more
restrictive ratings will be locked as well.
* Neither TV (FCC) ratings nor MPAA ratings apply to news programs.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Electronic Program Guide
Your Set-Top Box ha s a n Electronic
Progra m Guide (EPG) to help you
na viga te through a ll the possible
viewing options. The EPG supplies
informa tion, such a s progra m lists,
start and end times of all available
cha nnels. In a ddition, the deta iled
informa tion a bout the progra m is
often a va ila ble in the EPG . (The
availability and the amount of pro-
gram details will vary depending on
the broadcaster.)
I
H
G
A
B
C
D
E F
Viewing the Electronic Program Guide (EPG)
A
Displays which channel is currently selected to show program information in the
Channel Guide.
B
C
Press to view detailed information for the selected digital program.
Switches to the mini program guide. The mini guide shows the titles of the avail-
able programs of one channel. Press the Red button(ASPECT) on the remote con-
trol.
The set default guide is Mini Guide.
D
Scrolls backwards quickly (2 hours). Press the Green button(ADD/ DEL) on the
remote control and repeatedly press ENTER until the appropriate time is dis-
played.
E
F
Scrolls forward quickly (2 hours). Press the Yellow button(MTS) on the remote
control and repeatedly press ENTER until the appropriate time is displayed.
Exits from the Program Guide and returns to normal viewing mode. Press the
Blue button(CAPTION) on the remote control.
G
Displays titles and other details about upcoming programs of particular chan-
nels. Highlight the program and press ENTER to see additional and detailed
information. (The availability of additional details depends on the broadcaster.)
H
I
Displays the program times (arranged in 1 hour time blocks)
Displays the current time and date.
NOTE
• You can use the Guide button on the remote control to display the Electronic Program Guide. The
EPG begins its list with the channel that is currently active.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Using the EPG (Electronic Program Guide)
Press the MENU button on the remote control.
1
2
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight the Guide icon and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
:
Mini
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight Default Guide and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
3
:
Mini
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to alternate between “Mini” and
“Full” and press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
4
i
Mini
Full
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Viewing Information about One Channel
Press the MENU button on the remote control.
1
2
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight the Guide icon and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
:
Mini
Use the Menu Up/ Down buttons
to highlight Go to Mini Guide
and press ENTER.
3
Press the INFO button to see
detailed information on the
highlighted program.
4
NOTE
• Press ENTER to add the broadcasting info(where the cursor is located)
to Remind List.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Viewing Information about Channels
Press the MENU button on the remote control.
1
2
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight the Guide icon and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
:
Mini
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight Go to Full Guide and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
3
:
Mini
Use the Green button (ADD/ DEL)
to activate “-2 Hours” and the
Yellow button (MTS) to activate
“+2 Hours”.
4
5
You may now:
•
Jump to a channel directly: Use the Menu Up/ Down
buttons to highlight the channel number in the left column
and press ENTER.
•
Obtain additional program details: Use the Menu
Up/ Down/ Left/ Right buttons to highlight the title of
a program and press INFO.
•
Exit from the Program Guide and return to normal
viewing mode: Press the Blue button (CAPTION) or the EXIT
button.
NOTES
• You can switch to the GUIDE mode quickly by pressing the GUIDE button on the remote control
When you display the EPG after selecting DTV (1080i, 720p, 480p) with the Resolution Select
switch, no video is output through the Video Out jack or S-Video jack.
When activating “Search” in Full Guide mode, it might take some time.
44
• Press ENTER to add the broadcasting info(where the cursor is located) to Remind List.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
To view the Remind List
Press the MENU button on the remote control.
1
2
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight the Guide icon and
press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
:
Mini
GUIDE
Go to Mini Guide
Use the Menu Up/ Down buttons
to highlight Go to Remind List
and press ENTER.
√
√
√
Go to Full Guide
Go to Remind List
Default Guide
3
:
Mini
To remove all the remind programs
Press the t button to select “Cancel
All”, then press the enter button.
All the scheduled programs are
removed.
Remind List
8:30 pm - 9:30 pm Fri May 5
KBS 1 News line
Return
7
9:30 pm - 10:30 pm Fri May 5
6-1 SBS - DTV Sports
Cancel All
10:30 pm - 11:30 pm Fri May 5
7-1 KBS D-1 Drama
11:30 pm - 12:30 am Fri May 5
9-1 KBS D-2 Human Story
NOTE
• Once added to Remind List(Max.8), a reminding dialogue appears
3 minutes before moving to the applicable channel.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
Programming the Remote Control for Other Components
Press the SET button on the remote control. Use the number
buttons to enter the code by manufacturer.
(See tables on pages 46~48)
1
Each code must be three digits long. For example, to enter the
code “6,” press 0, 0, and 6. To enter the code “76,” press 0,
7, and 6.
See the remote control code tables on the following pages to
find the appropriate code for your particular component.
If more than one number is listed, try each one separately until
you find the one that works.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
TV Remote Control Codes
BRAND NAME
Akai
CODE
BRAND NAME
Genexxa
CODE
32, 70,73
203
Alba
113
LG(Goldstar)
Granada
5, 26, 45, 73, 66, 193
A-Mark
Amstrrad
Anam
32
5, 211
33
Grand
5
9, 32, 451, 85, 121, 198
General
3, 5, 8, 9, 40, 43, 44, 85,
AOC
5, 6, 19, 32, 73
Electric(GE)
Grandiente
Grundig
130, 198, 201, 215, 216
Archer
32
211
Audiovox
Bauer
32
47
26
Hallmark
5
Baycraft
Brockwood
Broksonic
Candle
36
Harmon Kardon
Hinari
61
5
34
62, 85
Hitachi
5, 26, 48, 49, 50, 51, 52, 53, 54,
5, 6, 22, 25, 36, 85, 73
55, 85, 97, 126, 202, 218
Capehart
Circuit City
Citizen
5, 19
Infinity
JBL
66
5
66
5, 6, 16, 22, 24, 25, 26, 85, 73
JC Penney
Jenson
JVC
3, 5, 6, 16, 26, 31, 43, 96, 85, 201
Colortyme
Concerto
Contec
73, 5
5
56, 73
57, 59
17, 27, 28, 41, 85
36, 41, 85, 194
26, 36
Kawasho
Kenwood
Kloss
48, 61, 73
Craig
6, 73
Crown
22, 61, 110, 198
Curtis Mathes
CXC
6, 16, 26, 73, 203
41, 85
KTV
26, 39, 40, 41, 73, 85, 196
Lloyds
5
Daewoo
Daytron
Dixi
5, 24, 26, 29, 30, 31, 32, 73, 198, 219
Lloytron
Loewe
26
5, 26
66
32, 66
Logik
18
Dumont
Echo star
Electrohome
Elta
5
Luxman
LXI
5
222
3, 63, 66, 90, 95, 125, 201
26, 73, 203, 209
Maganasonic
Marantz
Matsui
Megatron
Magnavox
73
32
6, 66, 73
Emerson
5, 17, 26, 27, 28, 33, 34, 35, 36, 37, 38,
32, 109
5
39, 40, 41, 73, 85, 192, 196, 199, 220
Envision
Etron
6, 73
32
6, 25, 36, 66, 67, 68,
73, 75, 110, 210
5, 18, 32, 90
Fisher
42, 90
Memorex
MGA
Formenti
Fortress
Fuijisu
26
4, 5, 6, 71, 73
73, 105
Mitsubishi
MTC
4, 5, 70, 71, 73, 97,123, 205, 207
5, 6, 16, 31, 73
2, 5, 95
34, 194
Funai
34, 41, 85, 194
41, 85, 194
NAD
Futuretech
National
National Quentis
NEC
9, 197, 198
197
5, 6, 7, 17, 73
47
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER FOUR
Special Features
4
TV Remote Control Codes
BRAND NAME
Nikkai
CODE
26, 95, 113
51
BRAND NAME
Sony
CODE
14, 15, 17, 21, 78, 109
Nordmende
Normandic
Novabeam
Nyon
Soundesign
Spectricon
Squaraview
SSS
5, 25, 36, 41, 85
217
6, 32
26, 61
201
194
5, 41, 73, 85
Onwa
41, 85
105, 107
194
Supra
5
Optionica
Orion
Supre-Macy
Sylvania
22
6, 25, 26, 36, 66, 68, 73, 75, 100, 110
Osaki
26
Symphonic
Teknika
132, 192, 194
Panasonic 8, 9, 10, 11, 12, 66, 85, 189, 197, 198, 206, 216
5, 6, 25, 36, 68, 73, 110
4, 5, 16, 18, 22, 24, 25, 26,
34, 36, 41, 73, 85, 114
Philco
66
Tatung
9, 198
Philips
2, 48, 51, 76, 208
Technics
Techwood
Tandy
8
Pioneer
Portland
Proscan
Proton
5, 26, 73
5, 73
3
105, 113
5, 13, 19, 26, 36, 85
Teleavia
Telefunken
Teletech
Tera
51
20
51
Pulsar
8, 9, 12, 77, 198
32
Queasar
Radio Sheck
RCA
26, 41, 85, 107, 198
13
3, 5, 48, 79, 80, 82, 83, 84, 85, 86, 87,
Thomas
5
125, 133, 134, 198, 201, 208, 215, 216
Thompson
Thomson
TMK
209
Realistic
Saba
90
51, 116
51
5, 73
Saisho
Sampo
Samsung
Samwon
Sanyo
32, 33, 109
Toshiba
16, 90, 95, 96
6, 19, 198
Tosonic
28
1, 5, 6, 16, 26, 32, 66, 204, 73, 221
Totevision
Toyornenko
Universal
Vector Research
Victor
26
32
5
17, 42, 89, 90, 92, 109
43
SBR
66
6
Schneider
Scott
66
57
26, 34, 37, 41, 85, 93, 100, 196, 201
Video Concepts
Vidtech
70, 85
Sears
3, 5, 26, 34, 42, 63, 89, 90, 94, 95, 96,
5, 73
99, 101, 102, 103, 104, 203
Viking
22
Seimitsu
Sharp
5
Wards
3, 5, 6, 18, 34, 36, 43, 67,
17, 26, 85, 105, 106, 107
68, 73, 78, 85, 107, 215
Siemens
Signature
Silver
17
18
73
26
Yamaha
York
5, 6, 73
5
18, 20, 193
220
Zenlth
Zonda
Solavox
48
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
A
Troubleshooting
If you have difficulty with your digital TV set-top receiver, there are several possibilities you
should investigate before calling for a service technician.
Problem
Possible Solution
Intermittent signal, or no signal
at all.
Try another channel.
Make sure the antenna is connected.
If a powered antenna, turn the power boost on.
You may also want to rotate the antenna for a
stronger signal, using the tri-state LED indicator on
the front of your tuner as a guide.
Poor sound quality, or no
sound.
Make sure audio connections are correct.
Try another channel - sometimes broadcasters
have problems with DTV audio encoding.
Make sure the MUTE button on your TV is off.
Try both analog and digital (coaxial, optical)
audio connections.
No color, or wrong colors.
Make sure you have connected the DTV set-top
receiver correctly to your DTV-ready or analog TV
set.
For a three-wire component connection, match the
red, green, and blue cables from the set-top
receiver to your TV.
Remote control doesn’t work
correctly.
Make sure you have fresh batteries installed the
correct way in your remote. Also, select the correct
remote command mode to DTV or STB.
The DTV set-top receiver won’t
turn on.
Make sure the receiver’s power plug is installed
and that the AC outlet is working.
Check the batteries in the remote control to make
sure they are fresh and installed correctly.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
A
Care and Maintenance
With proper care, your Set-Top Box will give you many years of service.
Please follow these guidelines to get the maximum performance.
Placement
•
Do not put the Set-Top Box near extremely hot, cold, humid or dusty places.
•
Do not put the Set-Top Box near appliances that create magnetic fields.
Liquids
•
Do not handle liquids near or on the Set-Top Box.
Cabinet
•
Never open the cabinet or touch the parts inside.
•
Wipe your Set-Top Box with a clean, dry cloth. Never use water, cleaning fluids, wax,
or chemicals.
•
Do not put heavy objects on top of the cabinet.
Temperature
•
If your Set-Top Box is suddenly moved from a cold to a warm place, unplug the power
cord for at least two hours so that moisture that may have formed inside the unit can
dry completely.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
A
Specifications
General Specifications
Broadcasting standard
Power requirement
Power consumption
Dimensions (W x D x H)
Weight
DTV (ATSC)
AC 120 V, 50-60Hz
20 watts / In standby: 2 watts
351 x 228 x 60 (mm)
4.48 lbs
RF Specification
Tuning system type
Band coverage
F/ S
VHF 2 ~ 13
UHF 14 ~ 69
Antenna
75-ohm external antenna terminal for
VHF/ UHF
Number of inputs/ outputs
75-ohm V/ UHF In/ Out
B
R
DTV Out component (Y P P , DVI, RGB)
Video Out
S-Video Out
Dolby Digital Out (Optical)
Dolby Digital Out (Coxial)
2 Analog Audio Out (Rt/ Lt)
Resolution Select Switch
51
Download from Www.Somanuals.com. All Manuals Search And Download.
|