Samsung MP3 Player DVD V3650 User Guide

Instruction  
Manual  
DVD-V3650  
POWER  
O
P
E
N
/
C
L
O
S
E
DVD/VCR PROGRESSIVE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
WARNING:  
Copy Notification  
TO PREVENT DAMAGE WHICH MAY RESULT IN  
FIRE OR ELECTRIC SHOCK HAZARD, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
Federal law provides severe civil and criminal penalties  
for the unauthorized reproduction, distribution, or  
exhibition of copyrighted motion pictures and  
videotapes. (Title 17, United States Code, Sections  
501 and 506).  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
WARNING:  
TO AVOID HAZARDOUS EXPOSURE TO INVISIBLE  
LASER RADIATION, DO NOT OPEN OR  
REMOVE/DEFEAT LASER TRANSPORT  
PROTECTIVE HOUSING.  
Macrovision Notification  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
CAUTION:  
USE OF ANY CONTROLS, ADJUSTMENTS, OR  
PROCEDURES OTHER THAN THOSE SPECIFIED  
HEREIN MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
7.  
Do not block any ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus  
(including amplifiers) that produce heat.  
USER/INSTALLER CAUTION:  
Your authority to operate this FCC certified equipment  
could be voided if you make changes or modifications  
not expressly approved by the manufacturer, who is  
responsible for compliance with Part 15 FCC rules.  
CAUTION:  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and a  
third grounding prong. The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
To prevent fire, shock hazard, or annoying  
interference, use only the recommended accessories.  
To prevent electric shock, do not use this (polarized)  
plug with an extension cord, receptacle, or other outlet  
unless the blades can be fully inserted to prevent blade  
exposure. To reduce the risk of electric shock, do not  
remove the unit cover or back. There are no  
serviceable parts inside. Refer servicing to qualified  
personnel only.  
NOTE TO CATV SYSTEM INSTALLER:  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the National  
Electronic Code that provides guidelines for proper  
grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of  
the building, as close to the point of cable entry as  
practical.  
10. Protect the power cord from being from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a used, caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
CUIDADO:  
Para prevenir incendio, riesgo de choque, o  
interferencia enfadosa, use solamente los accesorios  
recomendados. Para prevenir electrochoque, no use  
este enchufe (polarizado) con un cordón de extensión,  
toma de corriente, o cualquier otra toma a menos que  
los dientes puedan ser completamente insertados para  
prevenir exposición de los dientes. Para reducir el  
riesgo de descarga eléctrica, no remueva la cubierta o  
la parte posterior del equipo. Dentro del equipo no hay  
partes que requieren servicio. Diríjase solamente a  
personal calificado cuando requiera servicio.  
13. Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
CAUTION  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or been dropped.  
ATTENTION:  
Pour éviter les incendis, risque de chocs, ou  
interférences fâcheuses, employer seulement les  
accessoires recommandés. Pour éviter les chocs  
électriques, ne pas employer cette prise (polarisée)  
avec une rallonge, une prise de courant ou une autre  
sortie de courant à moins que les lames peuvent être  
insérées à fond pour l’exposition des lames. Pour  
réduire les risques de chocs électriques, ne pas retirer  
le couvercle ou l'arrière du module. Il n'y a pas de  
pièce utilisable à l'intérieur. Ne faire effectuer  
l'entretien que par un personnel qualifié.  
This symbol is intended to alert  
the user to the presence of  
uninsulated dangerous voltage  
within the product’s enclosure  
that may be of sufficient  
magnitude to constitute risk of  
fire or electric shock.  
This symbol is intended to alert  
the user to the presence of  
important operating and  
maintenance instructions in the  
literature accompanying this  
product.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Table of Contents  
Table of Contents  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
2
2
5 - DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Disc Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Digital Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Dynamic Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
PCM Down Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
TV Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Black Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Alt Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Parental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
7
7
8
Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Unpack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
1 - System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
9
9
Front Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Insert Batteries into Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Using the TV Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
6 - DVD Sound Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
A/V Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
2 - Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Basic Connections/Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
7 - DVD Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Disc Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
EZ View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Title/Chapter/Time Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Angle View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Program Play & Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
3D Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Function (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
3 - Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Basic DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Basic VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Basic TV Tuner Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
4 - System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
On-Screen Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Tuner Band Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Channel Add/Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Front Panel Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Auto Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
8 - VCR Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Special VCR Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Tracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Variable Search System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Feature Summary  
DVD+VCR Features  
Perfect compatibility to play back DVDs, audio CDs, MP3 discs or VHS Tapes.  
Enjoy a DVD movie while recording a TV show to the VCR.  
Auto Setup instantly finds the time and runs channel search.  
RF inputs and outputs for all kinds of TVs available.  
Composite, S-Video, and Component Video outputs.  
Universal remote provides the full operation on DVD+VCR.  
On-Screen Program (English/French/Spanish).  
9 - VCR Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Special Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
One Touch Recording (OTR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Record Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
DVD Features  
10 - Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
10-bit video digital to analog converter and 27MHz advanced digital filter.  
Playback of 96KHz/24-bit sources.  
DTS digital output for DTS-enhanced DVDs.  
Playback MP3-CDs.  
How to Set a Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Function(VCR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Appendix A - Advanced Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
VCR Features  
Hi-Fi Stereo VCR.  
S-Video/Component Video Connections (for DVD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Stereo Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Monitor TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Connecting Other Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Superior slow motion and stop action (with 4 heads).  
Playback of S-VHS tapes with a better than standard resolution.  
INTRO Scan, Zero Return, and END Search.  
7-event/1 month timer recording.  
Time remaining counter, real time counter.  
Appendix B - Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Note  
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
*Discs which cannot be played with this player.  
*Ability to play back may depend on recording  
DVD-ROM  
CD-ROM  
CDI  
DVD-RAM  
CDV  
VCD  
conditions.  
DVD-R  
CD-RW  
DVD+RW, -RW  
HD layer of Super Audio CD  
CDGs play audio only, not graphics.  
Unpack  
When you unpack the DVD+VCR, please check the following list of items is included in the  
packing case.  
Registration Card  
(AD68-00078A)  
Users Guide  
(AK68-00215A)  
DVD-VCR  
T  
D
V
D
/
V
C
R
P
R
O
G
R
E
S
S
I
V
E
RCA cable for  
Audio/Video connection  
(AC97-01746A)  
RF (Radio Frequency)  
Antenna Cable  
(AC39-42001J)  
1.5V AAABatteries- 2EA  
Remote Control  
(AK59-00008A)  
(AC43-12002H)  
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Front Panel Overview  
Disc Type and Characteristics  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
1
2
3
4
5
6
7
Disc Types  
(Logos)  
Max.  
Recording  
Types  
Disc Size  
Characteristics  
Playing Time  
Single-sided  
240 min.  
Double-sided  
480 min.  
• DVD contains excellent sound  
and video due to Dolby Digital  
and MPEG-2 system.  
• Various screen and audio  
functions can be easily  
selected through the on-  
screen menu.  
DVD  
5"  
DVD/VCR PROGRESSIVE  
Audio  
+
Video  
Single-sided  
80 min.  
Double-sided  
160 min.  
31/2"  
V
I
D
E
O
8
9 10 11 12 13 14  
15  
16 17 18  
AUDIO-CD  
• CD is recorded as a  
Digital Signal with better  
audio quality, less  
distortion and less  
deterioration of audio  
quality over time.  
74 min.  
20 min.  
5"  
Audio  
1
2
3
4
5
6
7
8
9
DVD DECK  
12 FAST-FORWARD/FWD  
13 RECORD  
DVD OPEN/CLOSE  
VCR DECK  
31/2"  
14 EZ VIEW  
CHANNEL  
/
15 FRONT PANEL DISPLAY  
DVD-VCR SELECT  
PROGRESSIVE  
VCR EJECT  
POWER  
16 LINE IN 2 COMPOSITE VIDEO JACK  
17 LINE IN 2 LEFT AUDIO JACK  
18 LINE IN 2 RIGHT AUDIO JACK  
STOP  
10 REWIND/REV  
Disc Markings  
11 PLAY/PAUSE  
DIGITAL  
SOUND  
~
STEREO  
NTSC  
• Digital  
Audio disc  
• DTS disc  
• MP3 disc  
• Play  
Region  
Number  
• NTSC broadcast  
system in U.S.A,  
Canada, Korea,  
Japan, etc.  
• Dolby  
Digital disc  
• Stereo disc  
Play Region Number  
Both the DVD player and the discs are coded by region. These regional codes must  
match in order for the disc to play. If the codes do not match, the disc will not play.  
The Region Number for this player is described on the rear panel of the player.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Control Overview  
Rear Panel  
1
2
3
4
5
6
7
POWER  
SHUTTLE <</>>  
100+  
POWER  
OPEN/CLOSE  
1
2
18  
DVD  
TV MUTE. AUDIO  
VOLUME +/–  
REWIND  
SKIP BACK  
STOP  
19  
20  
8
9
SUBTITLE  
10 MENU  
11 UP  
12 LEFT  
13 DOWN  
14 SPEED  
15 RECORD  
16 CLEAR  
17 MODE  
3
4
1
2
3
4
5
6
7
8
9
21  
22  
1
2
3
4
5
S-VIDEO OUT  
6
7
8
9
LINE IN 1  
DIGITAL AUDIO OUT(COAXIAL)  
DIGITAL AUDIO OUT(OPTICAL)  
COMPONENT VIDEO OUT  
AUDIO LINE OUT TO TV  
LINE OUT TO TV (COMPOSITE)  
RF ANTENNA INPUT  
RF OUT TO TV  
5
6
REPEAT  
18 OPEN/CLOSE  
19 0-9  
23  
24  
20 TV/VCR  
21 VCR, TV SELECT  
22 INPUT SEL.  
F.ADV/SKIP  
23 CHANNEL  
TRACKING  
24 FAST-FORWARD  
SKIP NEXT  
25 PLAY/PAUSE  
26 INFO.  
27 RETURN  
28 ENTER  
29 RIGHT  
30 EZ VIEW  
31 DISC MENU  
32 MARK  
(S-VIDEO OR COMPONENT)  
7
8
25  
26  
9
10  
27  
28  
29  
Front Panel Display  
11  
12  
1
2
3
4
5
13  
14  
15  
30  
31  
32  
33  
16  
17  
SEARCH  
33 ANGLE  
TIMER  
STEREO  
6
7
8
1
2
3
When the light is on, DVD is operating.  
DVD or CD media is loaded.  
6
7
A DVD with a DTS soundtrack is loaded.  
The Hi-Fi track of a VHS videotape is playing  
(The current TV program or video is broadcast in  
Stereo.)  
The time, counter position, time remaining or  
current deck status is indicated.  
Insert Batteries into Remote  
8
Timer Recording is in progress.  
4
5
VHS videotape is loaded.  
VCR is activated.  
It also blinks when you pause VCR.  
Remove the battery cover on the remote  
Insert two 1.5V AAAbatteries as shown, making sure of the correct  
polarities(+/-)  
Slide the cover back onto remote.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the TV Buttons on the Remote Control  
Basic Connections/Auto Setup  
You will need to connect the DVD-VCR to a TV and run Auto Setup.  
The Auto Setup will automatically search for channels and then set  
your DVD-VCR's internal clock.  
Your VCR remote control will work with Samsung televisions and  
compatible brands.  
To determine whether your television is compatible, follow the instructions  
below.  
NOTES:  
1
POWER  
OPEN/CLOSE  
• See Appendix A for Advanced Connections.  
• Standard RF or Line connections between your TV are  
required to run DVD+VCR setup menu, even if you  
connect S-Video or Component Video Output for better  
picture quality.  
1
2
3
Switch your television on.  
1
Point the remote control towards the television.  
From Antenna or Cable  
Hold down the TV button and enter the two-figure code  
corresponding to the brand of your television, by pressing the  
appropriate numeric buttons.  
1
2
Connect the RF Antenna Cable to your DVD-VCR  
Connect an external indoor/outdoor antenna or wall outlet antenna  
cable to the Ant-In jack on the rear panel.  
Brand  
Codes  
Brand  
Codes  
3
SAMSUNG  
SHARP  
SONY  
01, 14, 15, 23  
02, 16, 22  
03  
LOEWE  
ZENITH  
LG  
28  
17  
06, 08, 18  
Connect your DVD-VCR to a TV  
Choose one of the following methods:  
RF Connection  
2
2
Using the supplied RF antenna cable, connect the OUT jack (TO  
TV) on the back panel of your DVD-VCR to your TVs Antenna  
Input.  
RCA  
07, 29  
09  
12, 24  
10  
MAGNAVOX 04  
3
To TVs Antenna Input  
TOSHIBA  
PANASONIC  
HITACHI  
NEWSAN  
EMERSON  
SANYO  
DAEWOO  
NOBLEX  
21  
05, 20  
19  
Line Connection  
Using an RCA-type audio/video cable (red, white, yellow), connect  
the LINE OUT jacks on the back panel of your DVD-VCR to your  
TV's Line In jacks. Use the three cables as follows: red for right  
audio, white for left audio, and yellow for video.  
NOTE: If your TV is equipped with RCA jacks, it is better to use the  
Line Connection method.  
27  
25  
TELEFUNKEN 26  
3
4
Result: If your television is compatible with the remote control, it  
will switch off. It is now programmed to operate with the  
remote control.  
3
4
Plug In  
Your DVD-VCR's power should be plugged into a standard  
120V/60Hz wall outlet. Avoid pressing any buttons on the remote  
control or on the unit during an Auto Setup. While your DVD-VCR is  
running an Auto Setup, AUTOwill blink. When Auto Setup is  
complete, the current time will be displayed on the front panel. In  
case Auto Clock set fails to locate a channel to set the clock, you  
should set the clock manually. See page 18.  
If several codes are indicated for your television brand, try  
each one in turn until you find one that works.  
4
When you change the batteries in the remote control, you  
must reprogram the code, following the same procedure.  
You can then control the television using the following buttons.  
Turn On your DVD-VCR  
Turn on the power by pressing the POWER button on the remote  
control or on the front panel of the unit.  
Button  
Function  
5
POWER  
Used to switch the television on and off.  
Used to select an external source.  
Used to adjust the volume of the television.  
Used to select the required channel.  
Used to toggle the sound on and off.  
5
6
Turn On your TV  
Turn on the TV by pressing the POWER button.  
INPUT SEL.  
POWER  
OP  
Set the TV to Channel 3, 4 or Line  
VOL + or –  
4
The same channel you selected in Step 2 above must be used. If  
you are using the Line Connection method, set your TV to its Line  
Input.  
CH ( or  
MUTE  
)
4
The various functions will not necessarily work on all  
televisions. If you encounter problems, operate the  
television directly.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Deck Control Buttons  
Basic VCR Operation  
The DVD-VCR uses one set of controls to operate both decks. The  
following buttons are helpful in successfully controlling each deck.  
To play a standard VHS videotape, just insert it into the VCR deck  
and press the Play button. You can turn on the Auto Play to enable  
the VCR deck to play automatically when you insert a videotape  
that is missing the Record Safety Tab.. See page 53.  
1
POWER Button  
Press the POWER button on the remote control or front panel to  
turn on the DVD-VCR.  
POWER  
OPEN/CLOSE  
2
DVD Button  
1
2
Insert VHS Tape  
1
Insert a standard VHS videotape into the VCR deck.  
Press the DVD button on the remote control or front panel when  
you want to control the DVD deck.  
When a videotape is inserted, power will turn on automatically.  
The DVD indicator will light on the Front Panel Display to show  
that the DVD deck is selected.  
Play Tape  
Press the ll (PLAY/PAUSE) button on the remote control or on  
the front panel of the unit. The videotape will begin to play  
automatically if it is missing the Record Safety Tab and Auto Play is  
turned on. See page 53  
3
4
VCR Button  
Press the VCR button on the remote control or front panel when  
you want to control the VCR deck.  
The VCR indicator will light on the Front Panel Display to show  
that the VHS deck is selected.  
3
4
Stop Playback  
DVD/VCR PROGRESSIVE  
Press the  
panel of the unit.  
(STOP) button on the remote control or on the front  
I
1
2
3
INPUT SEL. Button  
4
Press the INPUT SEL. button repeatedly to cycle through all of  
your input sources, including the Tuner (Ch##), Line 1 (rear AV  
input), and Line 2 (front AV input).  
Eject Tape  
Press the OPEN/CLOSE button on the remote control or the  
EJECT button on the front panel of the unit.  
Input select is only available when the VCR deck is selected.  
5
Additional VCR Options  
See pages 52~54 for special VCR Playback features.  
See pages 55~57 for VCR Recording features.  
See page 58 for Timer Recording features.  
Basic DVD Operation  
3
2
Fllow the instructions below to playback a DVD.  
1
Open the Disc Tray  
Press the OPEN/CLOSE button on your remote control or on the  
front panel of the unit to turn on the power and open the disc tray.  
OPEN/CLOSE  
1
1
2
Insert a Disc  
Put a disc in the center of the tray, with the label-printed side facing  
up.  
4
DVD/VCR PROGRESSIVE  
3
4
Close the Disc Tray  
Press the OPEN/CLOSE button on your remote control or on the  
front panel of the unit to close the disc tray.  
Play a DVD  
Press the PLAY/PAUSE button on your remote control or on the  
front panel of the unit.  
Most discs will start to playback as soon as the tray closes.  
If a DVD has a MENU, the menu may pop up on TV screen.  
4
4
5
Additional DVD Options  
See pages 25 ~ 35 for advanced DVD Setup options.  
See pages 36 ~ 51 for special DVD Playback features.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic TV Tuner Operations  
Menu Language  
To change the on-screen MENU language to English, French or  
Spanish, follow these steps.  
When watching TV using the DVD-VCR's built-in TV tuner, use the  
buttons below.  
1
1
TV/VCR  
Press this button to switch between your TV's tuner and the VCR's  
internal tuner.  
3
1
2
Open “MENU”  
Press the MENU button while the DVD is in Stop or Play mode.  
4
1
You dont need to press the TV/VCR button in VCR mode.  
Select “SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
2
3
Channel Up/Down  
Use these buttons to move to the previous or the next channel.  
0-9 Buttons  
Use these buttons to select the desired channel directly.  
3
4
Select “Language”  
Use the UP/DOWN buttons to highlight Languagethen press the  
ENTER button.  
Language  
:
English  
4
100+ Button  
4
Press this button to tune to channels 100 and above. First, press  
the 100+ button, then use the numeric buttons (0-9) to enter the  
remaining digits of the channel number desired.  
Front Display  
:
:
Auto  
Off  
2
Auto Power Off  
Set menu Language  
Place the selection bar next to your desired Language, then press  
the ENTER button.  
This button is activated only in Cable TV Mode.  
5
INFO. Button  
Press this button to display the current channel.  
2
This also works in DVD and VCR mode.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
On-Screen Menu Navigation  
Auto Power Off  
The on-screen menus allow you to enable or disable various  
functions on your DVD-VCR. Use the following buttons to open  
and navigate through the on-screen menus.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
1
MENU Button  
Auto Power Off  
Press this button while the DVD is in Stop or Play mode to open  
the on-screen MAIN MENU.  
2
Up/Down and Left/Right  
Use these buttons to move the selection bar up, down, left and  
right to cycle through the menu options.  
3
4
ENTER Button  
1
2
Press this button to confirm any new settings.  
4
RETURN Button  
Language  
:
English  
Press this button to return to the last MENU screen displayed or to  
exit the on-screen MENU all together.  
2
2
Front Display  
:
:
Auto  
Off  
3
Auto Power Off  
2
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Manual Clock Set  
Tuner Band Setting  
If Auto Setup fails to set the DVD-VCR’s internal clock by locating  
a local TV station, follow these steps to set the date and time  
manually.  
This feature allows you to manually set the DVD-VCR’s tuner band  
to Antenna or Cable, whichever you connected to the Antenna In  
jack during initial setup.  
NOTE: For accurate Timer Recording, your DVD-VCR's internal  
clock must be set correctly.  
• Use this setting only if Auto Setup detected the incorrect tuner  
band, i.e. channels are coming in on the wrong channel numbers.  
1
1
3
4
1
2
Open MENU”  
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
Press the MENU button while the DVD is in Stop or Play mode.  
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
Language  
:
English  
then press ENTER to select.  
then press ENTER to select.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
3
4
Select Clock”  
Use the UP/DOWN buttons to highlight Clock , then press the  
ENTER button.  
3
4
Select Channel”  
Using the UP/DOWN buttons, move the selection bar to Channel,  
then press ENTER to select.  
Auto Power Off  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Select Manual Clock”  
Move the highlight to Manual Clock, then press the ENTER  
Select Ant/Cable”  
Move the selection arrow to Ant/Cablethen press right to select  
from the following options:  
button.  
The Clock Set/Adjust menu will change as shown.  
Language  
:
English  
Antenna - Indicates that the DVD-VCR is connected to an indoor  
or outdoor VHF/UHF antenna.  
Cable TV - Indicates that the DVD-VCR is connected to Cable TV.  
5
Set the Clock  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Use the Left/Right buttons to select each of the following options,  
then use the UP/DOWN buttons to set each option:  
Auto Power Off  
Front Display  
:
:
Auto  
Off  
Hour Set the hour.  
Minute Set the minute.  
Month Set the month.  
Auto Power Off  
Day  
Set the day.  
Year Set the year.  
Language  
:
English  
6
Confirm Settings  
Press the RETURN button to confirm your clock settings and to  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Language  
:
English  
return to the Setup Menu.  
Press the RETURN button again to exit.  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Antenna  
Cable TV  
Ant./Cable  
:
Antenna  
3CH  
RF Output CH  
:
Auto Channel Memory  
Channel Add/Delete  
Manual Clock  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RF Output Channel  
Auto Channel Memory  
Auto Channel Memory will automatically seek and store all active  
channels in your area.  
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
1
4
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
1
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
5
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
3
4
5
6
Select Channel”  
Using the UP/DOWN buttons, move the selection bar to Channel,”  
then press ENTER to select.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
3
4
Select Channel”  
Using the UP/DOWN buttons, move the selection bar to Channel,  
then press ENTER to select.  
Language  
:
English  
Auto Power Off  
Select RF Output CH”  
Move the selection bar to RF Output CH, then press right  
to change.  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Run Auto Channel Memory”  
Move the selection arrow to Auto Channel Memory,then press  
ENTER to select.  
Change RF Output CH”  
A message will appear on your TV.  
Then press ENTER to change.  
Language  
:
English  
The DVD-VCR will automatically search for all available  
channels in the selected Tuner Band. This procedure may take  
a few minutes to complete.  
Front Display  
:
:
Auto  
Off  
Change TV Channel”  
Auto Power Off  
When finished, the lowest channel found will be displayed.  
Language  
:
English  
A message will appear on your TV. When the message disappears,  
change your TV to channel 3 or 4 to match the RF output channel  
of the player.  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Ant./Cable  
:
:
Antenna  
3CH  
RF Output CH  
Auto Channel Memory  
Channel Add/Delete  
Ant./Cable  
:
Antenna  
4CH  
3CH  
4CH  
RF Output CH  
Auto Channel Memory  
:
Channel Add/Delete  
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Channel Add/Delete  
Front Panel Dimmer  
You can set the Front Panel Display to be bright all the time, dim  
all the time, or dim during power off.  
Use this feature if Auto Channel Search missed a channel that you  
would like to add, or added a channel you wish to remove.  
1
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
4
2
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
Language  
:
English  
3
Set Front Display”  
3
Select Channel”  
Using the UP/DOWN buttons, move the selection bar to Channel,  
then press ENTER to select.  
Language  
:
English  
Move the selection bar to Front Display,then press right to select  
from the following options:  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Front Display  
:
:
Auto  
Off  
Auto Front Panel Display will dim automatically during  
power off.  
Auto Power Off  
4
5
Select Channel Add/Delete”  
Move the selection bar to Channel Add/Delete,then press  
ENTER to select.  
Bright Front Panel Display will be bright all the time.  
Dim Front Panel Display will be dim all the time.  
Select Channel to add/delete  
Language  
:
English  
Use the CH  
/
buttons to tune in the channel number you wish  
to add or remove.  
Front Display  
:
:
Auto  
Off  
Language  
:
English  
Auto Power Off  
6
Select Channel Add/Delete”  
Front Display  
:
:
Auto  
Off  
Press right to add or press left to remove the channel from  
your channel list.  
Auto Power Off  
Repeat steps 4 and 5 to add or remove additional channels.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Language  
:
English  
Auto  
Bright  
Dim  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Ant./Cable  
:
:
Antenna  
3CH  
RF Output CH  
Auto Channel Memory  
Channel Add/Delete  
CHANNEL ADD/DELETE  
Select channel : [ 02]  
and press  
press  
[
[
]
]
to ADD  
to DELETE  
œ❷  
CH  
RETURN  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Power Off  
Disc Menu Language  
To set the Disc Menu Language to your preferred language, follow  
these steps. If your preferred language is available on a DVD, your  
Disc Menu Language will automatically be set to the language you  
choose.  
1
2
Open MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
1
Select SETUP”  
Using the UP/DOWN buttons, move the selection bar to SETUP”  
then press ENTER to select.  
2
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Select DVD”  
3
Set Auto Power Off”  
Move the selection bar to Auto Power Off, then press right to  
select from following options:  
Use the UP/DOWN buttons to highlight DVD,  
then press the ENTER button.  
Language  
:
English  
Off Auto power off is disabled.  
1Hr DVD-VCR will auto shut off 1 hour after the last button is  
3
4
5
Select Language”  
Move the selection bar to Languagethen press ENTER to select.  
pressed.  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Select Disc Menu”  
Highlight Disc Menu, then press the ENTER button.  
2Hr DVD-VCR will auto shut off 2 hours after the last button is  
pressed.  
Set Disc Menu LanguagePreference  
Highlight your preferred language for disc menus, then press the  
ENTER button.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Audio Language  
To set the Audio Language to your preferred language, follow these  
steps. If your preferred language is available on a DVD, your Audio  
Language will automatically be set to the language you choose.  
Language  
:
English  
Front Display  
:
:
Off  
Off  
Off  
1Hr  
2Hr  
Auto Power Off  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Select DVD”  
Use the UP/DOWN buttons to highlight DVDthen press  
the ENTER button.  
3
4
5
Select Language”  
Move the selection bar to Languagethen press ENTER to select.  
Select Audio”  
Highlight Audio,then press the ENTER button.  
Set Audio LanguagePreference  
Highlight your preferred language for audio soundtracks, then  
press the ENTER button.  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Subtitle Language  
Digital Output  
To set the Subtitle Language to your preferred language, follow  
these steps. If your preferred language is available on a DVD, your  
Subtitle Language will automatically be set to the language you  
choose.  
If your A/V receiver is equipped with a Dolby Digital decoder, your  
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST  
enable this feature in the menu system to prevent damage to your  
speakers.  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
NOTE: Select “Bitstream” ONLY if you have connected a Dolby  
Digital-equipped A/V receiver to the Digital Output  
(optical or coaxial) on the DVD-VCR back panel.  
Auto Power Off  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD, then press the  
ENTER button.  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
3
4
5
Select Language”  
Move the selection bar to Language, then press ENTER to select.  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
ENTER button.  
Select Subtitle”  
Highlight Subtitle, then press the ENTER button.  
3
4
Select Audio”  
Highlight Audio, then press the ENTER button.  
Set Subtitle LanguagePreference  
Highlight your preferred language for subtitles, then press the  
ENTER button.  
Set Digital Output”  
Highlight Digital Outputthen press the RIGHT button to select  
one of the following options:  
Subtitle Language  
Automatic  
PCM - To use your DVD/TV with an A/V receiver without a  
Dolby Digital decoder.  
Subtitle  
Bitstream To use your DVD/TV with an A/V receiver with a  
Dolby Digital decoder.  
PCM  
Bitstream  
PCM Down Sampling  
:
On  
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Dynamic Compression  
DTS  
If your A/V receiver is equipped with a DTS decoder, your DVD-  
VCR can output DTS digital sound, but you MUST enable this  
feature in the menu system.  
Dynamic Compression restrains the dynamic range of sound, i.e.  
the difference between the loud and quiet passages of a DVD audio  
track.  
Language  
:
English  
Language  
:
English  
NOTE: Select “On” ONLY if you have connected a DTS-equipped  
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on  
the DVD-VCR back panel.  
Front Display  
:
:
Auto  
Off  
Front Display  
:
:
Auto  
Off  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Auto Power Off  
Auto Power Off  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
ENTER button.  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
3
4
Select Audio”  
Highlight Audio, then press the ENTER button.  
ENTER button.  
Set Dynamic Compression”  
Highlight Dynamic Compression, then press the RIGHT button to  
select one of the following options:  
3
4
Select Audio ”  
Highlight Audio, then press the ENTER button.  
On - This will compress the total dynamic range of the DVD  
audio, making quiet passages in the audio signal louder and  
loud passages softer.  
Set DTS”  
Highlight DTS, then press the RIGHT button to select one  
of the following options:  
Off This will preserve the original dynamic range.  
Off - To use your DVD/TV with an A/V receiver NOT equipped  
with a DTS decoder.  
On To use your DVD/TV with an A/V receiver equipped with a  
DTS decoder.  
Off  
On  
Off  
On  
PCM Down Sampling  
:
On  
PCM Down Sampling  
:
On  
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
PCM Down Sampling  
TV Aspect Ratio  
If your amplifier is not capable of reproducing a 96kHz signal, PCM  
downsampling should be set to on.  
Set the aspect ratio (length x width) of your TV screen so the DVD  
player will display movies at the appropriate size for your  
television. Choose from standard, letterbox, or widescreen format.  
Language  
:
English  
Language  
:
English  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Front Display  
:
:
Auto  
Off  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Auto Power Off  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
ENTER button.  
ENTER button.  
3
4
Select Audio”  
Highlight Audio, then press the ENTER button.  
3
4
Select Display”  
Highlight Display, then press the ENTER button.  
Set PCM Down Sampling”  
Highlight PCM Down Sampling, then press the RIGHT button to  
select one of the following options:  
Set TV Aspect”  
Highlight TV Aspect, then press the RIGHT button to select one  
of the following options:  
On - When a 96K audio disc is played,  
Widescreen - This method allows you to view the full 16:9  
picture on a widescreen television.  
96K will be downsampled to 48K and outputted.  
Letterbox - This method displays the full width of the widescreen  
movie on a standard 4:3 television. As a result, black bars will  
appear at the top and bottom of the screen.  
Off When a 96K disc is played, 96K will be outputted.  
Pan-Scan - The familiar way of watching DVD and VHS movies,  
this method selectively crops (by panning and scanning to keep  
the most important part of the picture visible) wide screen  
movies to fit a standard 4:3 television screen.  
Display Setup  
On  
Off  
PCM Down Sampling  
:
On  
30  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Black Level  
Alt Video Out  
The “Alt Video Out” option must be set in the on-screen menu if  
you have connected your DVD-VCR to a TV using the S-VIDEO  
OUT or COMPONENT VIDEO OUT jacks.  
The Black Level feature adjusts the reference level of black in the  
video signal to one of two choices:  
• Off - Standard NTSC black level. Yields consistent contrast  
through all sources.  
Language  
:
English  
Language  
:
English  
• Use the S-Video or Component Video connection method only  
for the DVD player. The tuner and VCR can still be viewed  
through the RF or line outputs.  
• On - Enhanced black level, for increased contrast during DVD  
playback.  
Front Display  
:
:
Auto  
Off  
Front Display  
:
:
Auto  
Off  
Auto Power Off  
Auto Power Off  
1
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
2
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
ENTER button.  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD, then press the  
ENTER button.  
3
4
Select Display”  
Highlight Display, then press the ENTER button.  
3
4
Select Display”  
Highlight Display, then press the ENTER button.  
Set Black Level”  
Highlight Black Level,then press the RIGHT button to select one  
of the following options:  
Set Alt Video Out”  
On - This will enhance the Black Level for increased  
brightness/contrast when viewing DVDs.  
Off - This is the Standard NTSC reference Black Level for  
consistent brightness/contrast across all sources.  
Highlight Alt Video Out, then press the RIGHT button to select  
one of the following options:  
S-Video - Select this if you are using the S-Video OUT jack on  
the rear panel to connect to a TV.  
Component - Select this if you are using the COMPONENT  
VIDEO OUT jacks on the rear panel to connect to a  
Progressive(480p) or Interlaced (480i) TV.  
See your TV owners manual to determine what type of TV you  
have.  
- Interlace : Interlaced Scan mode will work.  
- Progressive : Progressive Scan mode will work, and Video  
and S-Video will not work.  
Press the Progressive button on the front panel if you have a  
Progressive scan TV only. Otherwise, the picture will be  
disturbed.  
Display Setup  
On  
Display Setup  
On  
On  
Off  
32  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A/V Receiver Connections  
Parental  
Rating Control is a password protected system that allows you to  
block playback of DVDs based on their content. The system uses an  
eight level rating system.  
• If you try to play a DVD that exceeds the selected rating, an error  
message will appear.  
To take full advantage of the movie theater experience that DVD  
offers, you may want to connect your DVD-VCR to a complete  
Surround Sound system, including an A/V Receiver and six  
Surround Sound speakers.  
• Not all discs are rated.  
Before You Begin...  
1
2
Open MENU”  
Press the MENU button while the DVD is in Stop mode.  
If your A/V receiver is equipped with a Dolby Digital Decoder,  
you have the option to bypass the DVD-VCR’s built-in Dolby  
Digital Decoder. Use the DIGITAL AUDIO OUT connection  
below.  
OR  
To Digital Audio Input of an A/V  
Receiver with a Dolby Digital  
Decoder  
Select DVD”  
Use the UP/DOWN buttons to highlight DVD , then press the  
ENTER button.  
1
Digital Audio Out  
3
4
Select Parental”  
Highlight Parental, then press the ENTER button.  
Connect EITHER an optical cable OR a digital coaxial cable from  
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR  
to their corresponding Digital Audio Input jacks on your A/V  
Receiver:  
Select Use Password”  
Highlight Use Password,then press the RIGHT button to select  
one of the following options:  
Optical  
Coaxial  
Off - No password is necessary to view a DVD or to change the  
Rating Level. No additional settings are necessary.  
On - A password is necessary to view a DVD and to view the  
Rating Level. The menu will change as shown.  
Use whichever connection is available on your A/V Receiver.  
NOTES:  
The first time Require Passwordis set to Yes,you will be  
prompted to enter a new password.  
If the Enter Passwordscreen appears, then Require  
Passwordhas already been set to Yes.Please skip to Step 5.  
There no Default Password.  
5
Enter Password  
Use the numeric buttons (0-9) on the remote control to enter the  
4-digit password.  
Write your password down, and keep it in a safe place in case  
you need it to change your settings later.  
6
7
Select Rating Level”  
Move the selection bar to Rating Level,then press ENTER to  
select.  
Change Rating Level  
Use the UP/DOWN buttons to select one of the following ratings:  
Level 8 Adult  
Level 7  
Level 6  
Level 4  
Level 3  
Level 2  
Level 5  
Level 1 Kids Safe  
All ratings above the level you select will also be blocked, e.g., if  
you block Level 6, then Levels 7 and 8 will also be blocked.  
Press ENTER to confirm your selection.  
If you forgot your password, press power on from a cold start  
with no disc in the unit. Press the REW and F.F buttons  
simultaneously on the front panel for 5 seconds. The reset ok”  
message will appear. Press the POWER button and the  
DVD-VCR will go to the Auto Setupmode. (See page 13)  
34  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disc Menu Navigation  
Many DVDs feature their own menu systems, where you can select  
Titles, Chapters, Audio Tracks, Subtitles, and special disc features,  
such as movie trailers, and information on the cast. Use these  
buttons to make selections in the Disc menus.  
2
2
2
2
1
2
DISC MENU  
Press to access the DVD’s Disc menu, if applicable.  
1
Press  
œ,  
or  
,
to navigate through DVD’s Disc menu  
options.  
• Press up, down, left and right to highlight menu choices.  
3
ENTER Button  
Press to make your selections in the Disc menu.  
3
EZ View  
1
2
Press the EZ VIEW button.  
• The screen size changes when the button is pressed repeatedly.  
• The screen zoom mode operates differently depending on the  
screen setting in the initial setup menu.  
• To ensure correct operation of the EZ VIEW button, you should  
set the correct aspect ratio in the initial setup .(See the page 31)  
1
If you are using a 16:9 TV  
- For 16:9 aspect ratio discs  
Wide Screen  
Displays the content of the DVD title in 16:9 aspect ratio.  
Screen Fit  
The top and bottom of the screen are cut off. When playing a  
2.35:1 aspect ratio disc, the black bars at the top and bottom  
of the screen will disappear. The picture will look vertically  
stretched. (Depending on the type of disc, the black bars may  
not disappear completely.)  
Zoom Fit  
The top, bottom, left and right of the screen are cut off and  
the central portion of the screen is enlarged.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EZ View  
Title/Chapter/Time Selection  
To view the current Title, Chapter/Track, and counter position,  
press the INFO button during DVD playback. The Information  
screen can also be used to quickly choose a title, chapter/track, or  
playing time.  
- For 4:3 aspect ratio discs  
Normal Wide  
Displays the content of the DVD title in 16:9 aspect ratio.  
The picture will look horizontally stretched.  
1
Screen Fit  
1
2
View the Display  
The top and bottom of the screen are cut off and the full screen appears. The picture will  
look vertically stretched.  
During DVD/CD playback, press the INFO button on the  
remote control.  
4
Zoom Fit  
Select title  
The top, bottom, left and right of the screen are cut off and the central portion of the screen  
is enlarged.  
Use the UP/DOWN and LEFT/RIGHT buttons to select Title, then  
press the ENTER button to change among all available titles on the  
disc.  
Vertical Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the  
screen in order to prevent the picture from looking horizontally stretched.  
3
4
Select Chapter or Track  
Use the UP/DOWN and LEFT/RIGHT buttons to select Chapter or  
Track, then press the ENTER button to change among all  
available Chapters/Tracks on the disc.  
ENG  
ENG  
3
If you are using a 4:3 TV  
- For 16:9 aspect ratio discs  
4:3 Letter Box  
Select Counter Position  
Use the UP/DOWN and LEFT/RIGHT buttons to select the counter  
position indicator, then use the numeric buttons (0-9) to enter the  
desired counter position in the format H:MM:SS (H = Hours, M =  
Minutes, S = Seconds).  
Then press the ENTER button to enter the desired counter  
position.  
Displays the content of the DVD title in 16:9 aspect ratio.  
The black bars will appear at the top and bottom of the screen.  
4:3 Pan Scan  
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.  
Screen Fit  
The top and bottom of the screen are cut off and the full screen appears. The picture will look  
vertically stretched.  
To make the screen disappear, press the INFO button again.  
ENG  
ENG  
Zoom Fit  
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the  
screen in order to prevent the picture from looking horizontally stretched.  
To access the desired title when there is more than one in  
the disc. For example, if there is more than one movie on a  
DVD, each movie will be identified.  
- For 4:3 aspect ratio discs  
Title  
Normal Screen  
Displays the content of the DVD title in 4:3 aspect ratio.  
Most DVD discs are recorded in chapters so that you can  
quickly find a specific passage.  
Chapter  
Time  
Screen Fit  
The top and bottom of the screen are cut off and the full screen appears. The picture looks  
vertically stretched.  
Allows playback of the film from a desired time.  
You must enter the starting time as a reference.  
Zoom Fit  
Refers to the language of the film soundtrack. In the  
example, the soundtrack is played in English 5.1CH. A DVD  
disc can have up to eight different soundtracks.  
The top, bottom, left and right of the screen are cut off and the central portion of the screen is  
enlarged.  
Audio  
ENG  
ENG  
Refers to the subtitle languages available in the disc.  
You will be able to choose the subtitles language or, if you  
prefer, turn them off from the screen. A DVD disc can have  
up to 32 different subtitles.  
Subtitle  
3D Sound  
This function may behave differently depending on the type of disc.  
A surround sound effect is generated using only two front  
speakers.  
38  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Subtitle  
Angle View  
Some DVD Movies provide you with various camera  
angle views on the same scene while they are playing.  
To activate the feature press the ANGLE Button.  
Some DVDs provide subtitles in one or more languages. You can  
use the SUBTITLE button to quickly view and change settings.  
1
1
2
Open Subtitle Menu  
During playback, press the SUBTITLE button.  
1
2
3
Check for the Angle Icon  
Press the Angle button, youll see the Angle Icon when watching a  
DVD with multi Angles available.  
1
3
Set Subtitle Language  
Use the LEFT/RIGHT buttons to select from the available subtitle  
languages.  
View Angle Menu Options  
When the Angle Icon comes up on the screen press the ANGLE  
button to see the Angle menu.  
Subtitle languages are represented by abbreviations.  
ENG  
On  
3
Activate Subtitles  
Use the UP/DOWN buttons to turn subtitles On or Off.  
Select an Angle option  
Press the LEFT/RIGHT buttons to select a camera angle you wish  
to see.  
The default is "On".  
Press the ENTER button to confirm your selection.  
ENG  
Off  
40  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A to B Repeat  
Repeat Chapter/Title  
The A to B Repeat feature enables you to repeat a designated  
section on a DVD or CD. To activate, mark where to start(A) and  
where to end(B) of the section you want to watch.  
You can repeat a single chapter or a complete title.  
5
1
2
Open Repeat Menu  
Press the REPEAT button while in Play mode to open the Repeat  
menu.  
The current Repeat mode will be highlighted.  
1
Select A-B Repeat Function  
Press the REPEAT button while in Play mode, then use the  
Left/Right buttons to select A-B Repeat.  
4
1
1
When you select A-B Repeat, A-will be highlighted.  
Select “Chapter”  
DVD  
NOTE: The menu will display Trackin place of Chapterif you  
Use the LEFT/RIGHT buttons to select Chapter.  
are playing a CD.  
Chapter Title A - B  
Off  
When you select Chapter Repeat, Chapterwill be highlighted.  
DVD  
2
Mark the Starting Point  
Press the ENTER button at the beginning of the segment you want  
to repeat (Point A).  
3
4
Repeat Chapter  
Chapter Title A - B  
Off  
Press the ENTER button to repeat the current chapter or track.  
Once you select Point A, Bwill be highlighted.  
Select “Title”  
NOTE: The minimum A-B Repeat time is 5 seconds.  
Use the LEFT/RIGHT buttons to select Title.  
When you select Title Repeat, Titlewill be highlighted.  
CD  
3
4
Mark the Ending Point  
5
Repeat Title  
Track Disc A - B  
Press the ENTER button again at the end of the segment you want  
to repeat (Point B).  
Off  
Press the ENTER button to repeat the title.  
CD  
The segment will begin repeating in a continuous loop.  
Track Disc A - B  
Off  
Cancel A-B Repeat  
Press the REPEAT button to open the Repeat Menu, use the  
Left/Right buttons to highlight Off,then press the ENTER button.  
Audio  
DVD  
Multiple language/audio setup options, such as Dolby Digital 5.1,  
Dolby Pro Logic, or LPCM 2 Channel audio, are available on some  
DVDs. You can use the AUDIO button to quickly view and select  
the options available on a disc.  
ENG DOLBY DIGITAL 5.1CH  
1
2
Open the Audio Menu  
During playback, press the AUDIO button on the remote control.  
Select DVD Audio Track  
CD  
Use the LEFT/RIGHT buttons to select the desired language/audio  
setup on the DVD.  
Stereo  
Languages are represented by abbreviations, e.g. ENGfor  
English.”  
42  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MP3/WMA Play  
Bookmarks  
When an MP3/WMA Disc is inserted into the DVD player, the first song file of  
the first folder plays.  
Up to three Bookmarks can be inserted for a given DVD, allowing  
you to quickly jump to your favorite scene or song.  
If more than two file extensions are present, select the media of your  
choice.  
1
Open Bookmark Menu  
During playback, press the MARK button on the remote control.  
The MARKheader will be displayed on the screen.  
To change the currently playing media, press the STOP (  
twice and then press the DISC MENU button.  
) button  
3
If no button on the remote controller is pressed for 60 seconds, the menu  
will disappear and the selected item will be played.  
1
2
Select Bookmark Placeholder  
Use the LEFT/RIGHT buttons to move to one of the three bookmark  
placeholders (- - -).  
MP3/WMA Play Function  
The selected placeholder will be highlighted.  
When the first song file is playing, the music folder menu will  
appear on the right side of the screen.  
Up to 8 music folders can be displayed at a time. If you have more  
than 8 folders on a disc, press the LEFT/RIGHT buttons to bring  
them up on the screen.  
1.  
2.  
=
– –  
3
4
Set the Bookmark  
Keep on playing the DVD up to the scene you want to bookmark,  
then press the ENTER button. The placeholder (-) will change to a  
number (1, 2 or 3).  
You may continue to set up to three bookmarks.  
Press the MARK button when complete.  
Use the UP/DOWN buttons to select the desired music folder, then  
press ENTER. Use the UP/DOWN buttons again to select a song  
file. Press ENTER to begin playback of the song file.  
RETURN  
Depending on the disc, the bookmark function may not work.  
Program/Random playback  
Play Bookmark  
CLEAR  
1
– –  
During playback, press the MARK button on the remote control.  
Use the LEFT/RIGHT buttons to move to a previously set  
bookmark.  
PROGRAM  
RANDOM  
With the MP3 in Stop mode, press the MODE button to switch  
1.  
between the RANDOM and PROGRAM modes. See page 47 for  
more information on these modes.  
Press the PLAY/PAUSE button to play the bookmark.  
Press the CLEAR button to cancel the bookmark.  
Press the MARK button again to exit the Bookmark menu.  
Press the REPEAT button to hear only music continuously and  
press it once again to release.  
RETURN  
• PROGRAM/RANDOM playback cannot be used if the disc  
contains more than two types of file extensions.  
44  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MP3/WMA Play  
Program Play & Random Play  
CD-R MP3/WMA discs  
Program Play (CD/MP3/WMA)  
PROGRAM  
RANDOM  
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above,  
plus the comments below:  
1.  
2.  
With the MP3 in Stop mode, press the MODE button.  
Your MP3 or WMA files should be ISO 9660 or JOLIET format.  
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,  
and with Apple's Mac. These two formats are the most widely used.  
Use the LEFT/RIGHT buttons to select PROGRAM.  
Press the ENTER button.  
RETURN  
When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma"  
as the file extension.  
3.  
4.  
Use the LEFT/ RIGHT/ UP/ DOWN buttons to select the first track  
to add to the program.  
Press the ENTER button. The selection numbers appear in the  
Program Order box.  
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you  
use 8 characters or less, have no spaces in the name, and avoid the use of special characters  
including: (.,/,\,=,+).  
PROGRAM 01  
Track  
Program order  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.  
Sound quality with MP3 files basically depends on the rate of compression/decompression you  
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is  
conversion to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher  
rates, like 192 Kbps or more, only rarely give better sound quality.  
Press the PLAY/PAUSE (ll) button.  
The disc will be played in programmed order  
.
RETURN  
CLEAR  
Conversely, files with decompression rates below 128 Kbps will not be played properly.  
Use a decompression transfer rate of at least 64Kbps when recording WMA files.  
Sound quality with WMA files basically depends on the rate of compression/decompression you  
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is  
conversion to WMA format, of at least 64Kbps and up to 192Kbps.  
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played  
properly.  
PROGRAM  
RANDOM  
Random Play (CD/MP3/WMA)  
Do not try recording copyright protected MP3 files.  
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files  
are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM  
(registered trade mark of The SDMI Foundation). You cannot copy such files.  
1.  
2.  
With the MP3 in Stop mode, press the MODE button.  
Use the LEFT/ RIGHT buttons to select RANDOM.  
Press the ENTER button.  
The disc will be played in random order.  
Important: The above recommendations cannot be taken as a guarantee that the DVD player will  
play MP3 recordings, or as an assurance of sound quality.  
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent  
optimal playback of these files on your DVD player (degraded sound quality and in some cases,  
inability of the player to read the files).  
RETURN  
This unit can play a maximum of 500 files and 300 folders per disc.  
• Depending on the disc, the Program and Random Play  
functions may not work.  
• To resume normal play, press the CLEAR button.  
• PROGRAM/RANDOM playback cannot be used if the disc  
contains more than two types of file extensions.  
• This unit can support a maximum of 99 programmed order.  
46  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Picture CD Playback  
Picture CD Playback  
Select JPEG in the menu to view a Photo CD.  
To change the currently playing media, press the STOP ( ) button  
twice and then press the DISC MENU button.  
CD-R JPEG Discs  
If no button on the remote controller is pressed for 60 seconds, the  
menu will disappear and the selected item will be played.  
Only files with the ".jpg" and ".JPG" extensions can be played.  
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.  
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.  
The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or  
special characters (. / = +).  
Only a consecutively written multisession disc can be played. If there is a blank segment in the  
multisession disc, the disc can be played only up to the blank segment.  
A maximum of 500 images can be stored on a single CD.  
1.  
Open the disc tray.  
2.  
3.  
Load the disc on the tray.  
- Load the disc with the labeled side up.  
Close the tray.  
- The tray closes and you should get a screen that looks like the  
one to the left.  
Kodak Picture CDs are recommended for use with this unit.  
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.  
Picture discs other than Kodak may take longer to start playing or may not play at all.  
If there are over 500 files on a disc, only the first 500 JPEG files can be played.  
If there are over 300 files on a disc, only the first 300 JPEG files can be played.  
ALBUM  
PHOTO: 1 /215  
Use the Up/Down or Left/Right buttons on the remote controller to select  
the picture you want to view and then press the ENTER button. (Press  
the PLAY/PAUSE ( ll ) button if you want to play it in the Slide Show  
mode.)  
button.  
To see the next 6 pictures, press the  
To see the previous 6 pictures, press the  
button.  
: Return to the Album Screen.  
PHOTO: 1 /215  
: Each time the ENTER button is pressed, the picture rotates 90  
degrees clockwise.  
RETURN  
: Each time the ENTER button is pressed, the picture is enlarged  
up to 4X. (Normal 2X 4X 2X Normal)  
: The unit enters slide show mode.  
*Press the RETURN button to return to the album screen.  
*Before the Slide Show can begin, the picture interval must be set.  
: When this icon is selected and ENTER is pressed, the pictures  
change automatically with about an 6 second interval.  
RETURN  
TIMER:  
: The pictures change automatically with about an 12 second  
interval.  
: The pictures change automatically with about an  
18 second interval.  
*Depending on the file size, each interval between images may take  
longer or shorter than the manual suggests.  
• Press the RETURN button to return to the album screen.  
• Press the RETURN button to return to the slide show.  
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.  
Press the Up/Down or Left/Right buttons on the remote controller to display the menu again.  
48  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3D Sound  
Function (DVD)  
The 3D Sound function is a sound enhancement mode that lets you  
enjoy virtual surround sound with only two speakers.  
Use this feature to check your DVD.  
Language  
:
English  
1
2
Open MENU”  
With the DVD in Play mode, press the MENU button.  
1
2
3
Press the INFO.button  
Front Display  
:
:
Auto  
Off  
During playback, press the INFO.button on the remote control.  
Auto Power Off  
Select FUNCTION”  
Use the UP/DOWN buttons to highlight FUNCTION, then press  
the ENTER button.  
Set 3D Sound  
Use the UP/DOWN buttons to select 3D Sound.  
3
4
Select DVD Function”  
Using the UP/DOWN buttons to highlight DVD Function, then  
press ENTER to select.  
Use the LEFT/RIGHT buttons to confirm your selection.  
-ON : A surround sound effect is generated using only two front  
speakers.  
-Off : This function will not work.  
Select Title Menu”  
Highlight Title Menu, then press the ENTER button.  
- Disc Menu  
ENG  
ENG  
4
To make the screen disappear, press the INFO.button again.  
Highlight Disc Menu, then press the ENTER button.  
- Information  
Highlight Information, then press the ENTER button.  
- Zoom  
Highlight Zoom, then press the ENTER button.  
- Bookmark  
Highlight Bookmark, then press the ENTER button.  
- Repeat  
Highlight Repeat, then press the ENTER button.  
- EZ View  
DVD Function  
Title Menu  
Disc Menu  
Information  
Zoom  
Bookmark  
Repeat  
Highlight EZ View, then press the ENTER button.  
EZ View  
50  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Special VCR Playback Features  
Auto Play  
While a videotape is playing, you can enjoy a variety of special  
playback features, including Still, Frame Advance, Skip, Repeat, and  
more. Press the Play button again to resume normal playback.  
If you want your videotapes to play automatically when you insert  
them, turn on Auto Play.  
NOTE: Only tapes that are missing the Record Safety Tab will  
play automatically when inserted.  
PLAY  
1
2
3
Still  
From Play mode, press Play/Pause to still a single frame.  
1
2
Open the MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
Frame Advance  
From still mode, press F.ADV/SKIP to advance to the next frame.  
0:00:00 SP  
Select VCR”  
Using the Up/Down buttons, move the selection bar to  
VCRthen press ENTER to select.  
Press the INFO. button to see the  
current status of the VCR deck, as well  
as the tape counter position and  
record speed.  
T120  
T160  
T180  
Cue/Review  
From Play mode, press F.Forward () or Rewind () to  
cue/review at two speeds:  
n
Picture Search Press and release to advance the tape  
forward or backward at 5 times normal speed.  
Jet Search Press and hold to advance the tape forward or  
backward at 7 times normal speed.  
3
Select Tape Length”  
Press the RIGHT button to select the video cassette length.  
This information is usually printed on the tape box. The menu  
cycles through: T120, T160 or T180. Once the type of cassette is  
set, the VCR can display the amount of time remaining on the tape  
when you press the INFO. button.  
4
5
Skip  
3
3
From Play mode, press F.ADV/SKIP to cue ahead exactly 30  
seconds. Press Skip repeatedly up to 4 times to cue ahead 2  
minutes.  
4
Select Auto Play”  
Move the selection bar to Auto Play,then press right to select  
from the following options:  
On  
Off  
n
Repeat  
On - The VCR will automatically begin playing a video tape  
when it is inserted, as long as the safety tab of the cassette has  
been removed.  
From Play mode, press Repeat to review the last 5 seconds of  
tape (SP mode).  
From Play mode, press Repeat to review the last 15 seconds of  
tape (SLP mode).  
Off - Auto play is disabled.  
5
Select Auto Repeat”  
6
Shuttle  
Move the selection bar to Auto Repeatsets the VCR to  
play a tape repeatedly [unless a tape control is activated (stop, fast  
forward or rewind)].  
From Play mode, Shuttle >> gradually increases the cue speed  
from Double-Speed playback to Picture Search to Jet Search.  
Shuttle << gradually slows down the tape, then goes into Slow  
mode, Still mode, Reverse Picture Search and Reverse Jet Search.  
n
Off  
On  
Tracking  
The Tracking adjustment removes the white lines that sometimes  
appear during playback because of slight differences in recording  
decks. The TRK button will automatically align the recorded tracks  
with the playback heads to solve this problem. You may also set  
tracking manually.  
S-VHS Playback  
1
The DVD-VCR allows you to playback high quality S-VHS tapes.  
1
2
Insert a S-VHS Tape  
1
Adjust Tracking Manually  
During playback, press the CH/TRK  
remove white lines from the picture.  
Insert an S-VHS tape into the VCR deck.  
or CH/TRK  
buttons to  
1
Start Playback  
Press Play/Pause on the remote control to begin playback of the S-VHS tape.  
52  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Recording  
Variable Search System  
Press the SEARCH button to display the search screen in the stop  
You can record a TV show in progress by inserting a blank tape and  
pressing the REC button. You can even add time in 30-minute  
increments up to 4 hours by pressing the REC button repeatedly;  
see page 57.  
mode. When a program is recorded, the starting point is given an  
Index mark for easy location. However, the VHS Index Search  
System (VISS) cannot recognize index marks made by old VCRs. If  
the VCR has trouble finding a mark, it is probably because the  
cassette was recorded on a VCR without VISS. If you want to index  
two programs in a row, set your VCR to stop, then start recording  
each program. Pause has no effect on index marks.  
Forward  
Reverse  
NOTE: Be sure your videotape has a Record Safety Tab. If the tab  
is missing, you can cover the opening with a small piece of  
tape. Warning: Do not cover this opening unless you are  
sure you want to record over the tape.  
1
Go to 0:00:00 stop  
Before You Begin...  
Use this feature when you want to search for the 0:00:00 counter  
position on a cassette. Press the CLEAR button at the point on the  
tape where you want to set the counter to 0:00:00. While a  
cassette is stopped, press the ENTER button. The VCR will rewind  
or fast forward, searching for the 0:00:00 counter position, and then  
automatically stop at that position.  
Power on the DVD-VCR  
Power on the TV  
Set the TV to channel 3 or 4 .  
1
2
Insert Tape  
Insert a blank VHS tape into the VCR deck.  
• Make sure the tape is long enough to record the entire program.  
To change the Recording Speed, see page 57.  
2
2
End search  
Use this feature when you want to search for a blank position to  
record a program on a cassette. While a cassette is stopped, press  
ENTER button. The VCR will fast forward, searching for a blank  
position, and then automatically stop at that position. If the VCR  
reaches the end of the tape during end search, the tape will be  
ejected.  
Select a Channel to Record  
Use the 0–9 buttons or the Channel Up/Down arrow buttons to  
select the desired channel, or press the INPUT SEL. button to  
select Line 1 or 2 if recording from an external device connected to  
the front or rear Line inputs, respectively.  
3
Scan and play  
Use scan and play when you dont know exactly where a program  
is located on a cassette tape.  
3
Start Recording  
3
Press the REC button on the remote control or front panel.  
For options while recording is in progress, see “Special Recording  
Features” on the next page.  
- Forward Intro Scan  
Highlight Forward Intro Scan, then press the ENTER button.  
- Reverse Intro Scan  
Highlight Reverse Intro Scan, then press the ENTER button.  
1
Recording from the DVD player to the VCR is not  
possible.  
DVD/VCR PROGRESSIVE  
3
54  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Special Recording Features  
One-Touch Recording (OTR)  
While a recording is in progress, you can watch a different channel,  
watch a DVD, or add recording time in 30-minute increments.  
One-Touch Recording (OTR) allows you to add recording time in  
30-minute increments up to 4 hours at the touch of a button.  
1
RECORD  
1
Pause/Resume Recording  
Press the ll (PLAY/PAUSE) button.  
Press REC again to resume.  
1
2
Start Recording  
Follow the instructions on page 55 to begin recording.  
2
Activate OTR  
While in Record mode, press the REC button again to activate  
One-Touch Recording (OTR).  
2
3
Stop Recording  
Press the STOP button.  
Record length 0:30 appears on the On-Screen Display and the  
DVD-VCR will record for exactly 30 minutes.  
Watch a Different Channel  
Press the TV/VCR button on the remote to switch to your TV tuner,  
then select a different channel on your television.  
3
0:30  
1:00  
1:30  
2:00  
3:00  
4:00  
3
Add Recording Time  
Record length 0:30 07  
Continue pressing REC to add recording time in 30 minute  
increments up to 4 hours.  
4
5
To Watch a DVD  
Insert a DVD in the DVD deck and press Play. The output will  
automatically change to the DVD.  
The DVD-VCR stops recording automatically when the time has  
elapsed.  
SP  
Add Recording Time  
See One-Touch Recording (OTR) on the next page.  
4
Record Speed  
You can slow down the recording speed from SP to SLP in order to fit  
six hours of programming on a T-120 tape.  
1
2
Start Recording  
Follow the Basic Recording instructions on page 55.  
2
Set Record Speed  
Press the SPEED button on the remote control to set the Record  
Speed to one of the following options:  
SP Standard Play, for best quality.  
SLP Super Long Play, for maximum recording time (3 times SP).  
NOTE: The selected Record Speed will appear on the front panel  
display and on-screen display.  
Maximum Recording Time - SP vs. SLP  
Tape Length  
T-120  
SP (Standard Play)  
2 hrs  
SLP (Super Long Play)  
6 hrs  
8 hrs  
9 hrs  
T-160  
2hrs 40 mins  
3 hrs  
T-180  
56  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Function (VCR)  
How to Set a Timer Recording  
Insert a blank videotape into the VCR deck. Be sure to leave the  
Record Safety Tab intact.  
1
Open “MENU”  
With the DVD in Stop or Play mode, press the MENU button.  
With the Timer Recording function, you can program up to 7  
events at a time to record up to a month in advance.  
Set the TV to channel 3 or 4.  
Language  
:
English  
Language  
:
English  
Front Display  
:
:
Auto  
Off  
Front Display  
:
:
Auto  
Off  
2
3
4
Select “FUNCTION”  
Use the Up/Down buttons to highlight FUNCTION, then press the  
ENTER button.  
Auto Power Off  
Auto Power Off  
To Begin Setting the Timer Recording,  
• Turn on your DVD-VCR, and  
• Turn on your TV.  
Select “VCR Function”  
Using the UP/DOWN buttons to highlight VCR Function, then  
press ENTER to select.  
1
Open “MENU”  
Press the MENU button or the TIMER button while the DVD is in  
Stop or Play mode.  
Timer Program  
Select “Go to ( 0: 00: 00)”  
If you want to set  
the timer program,  
Highlight Go to (0:00:00), then press the ENTER button.  
2
3
Select “Program”  
Use the UP/DOWN buttons to highlight PROGRAM, then press  
the ENTER button.  
press the ENTER key  
- End Search  
Highlight End Search, then press the ENTER button.  
- Forward Intro Scan  
Highlight Forward Intro Scan, then press the ENTER button.  
- Reverse Intro Scan  
Select Channel Number  
Use the Right and UP/DOWN buttons to set the channel.  
Press the RIGHT button to move to the next setting.  
Highlight Reverse Intro Scan, then press the ENTER button.  
4
5
Set “Time/Date/Speed”  
No  
Ch  
Start  
End  
Date  
Speed  
Repeat Step 3 above to set start time, end time, date and record  
speed. Date can be set for one time, daily or weekly recording.  
See below.  
1
2
3
4
5
6
7
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Forward  
Reverse  
Save “Timer Recording”  
Press the RETURN button to finish setting the timer recording.  
Stop the VCR or turn the power off. The timer indicator light will  
come on the VCR. Then the VCR will automatically turn on and  
begin recording at the time you set. To stop the timer recording,  
press the POWER button or press the STOP button two times.  
6
7
Auto Speed Select  
If the length of the videotape is not long enough for a timer  
recording in the SP mode, set the recording tape speed to AUTO.  
Recording will start in the SP mode. If the length is not long  
enough, the tape speed will automatically change from SP mode to  
SLP mode.  
Daily/Weekly Date Programming  
Weekly [SUNS~SATS]: Use this to record TV programs on the  
same channel at the same time every week.  
Daily [MO - FR] : Use this to record TV programs on the same  
channel at the same time every day Monday through Friday.  
58  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Stereo Connections  
S-Video/Component Video Connections (for DVD)  
You can connect your DVD-VCR to your home stereo system or  
stereo TV and enjoy stereo sound when watching a movie or TV.  
Use the S-Video or Component Video connection method for the  
DVD player only. The tuner and VCR can still be viewed through  
the RF or line inputs.  
To activate your alternative (S-Video or Component) video  
selection, follow the “Alt Video Out” instructions on page 33.  
Keep in mind that you can choose either S-Video or Component  
only, but not both.  
A superior video quality can be obtained when watching a DVD on  
your DVD-VCR if your TV is equipped with S-Video or Component  
Video inputs.  
1
Connect DVD-VCR to Stereo  
Using RCA cables, connect the Line Out Left and Right Audio jacks  
on the back panel of the DVD-VCR to the Auxiliary Inputs on your  
stereo receiver. Connect the Video Output also in case you are  
using a stereo TV.  
1
To S-Video Input on Your TV  
2
3
Set Stereo to Auxiliary Mode  
1
Connect S-VIDEO OUT to TV  
Set your stereo receiver or TV to either Auxor Taperegardless  
of which line input you are using for your particular device.  
Using an S-Video cable, connect the S-VIDEO OUT on the back  
panel of your DVD-VCR to the S-Video Input on your TV.  
2
Play a Tape  
2
Connect Component Video Out to TV  
Insert a DVD or Hi-Fi stereo videotape into your system. Be sure to  
adjust the volume on your stereo receiver or TV. Audio will be heard  
through your stereo speakers.  
To Component Video Input  
on Your TV  
Using a component video cable, connect the COMPONENT  
VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD-VCR to the  
Component Video Input on your TV.  
If there is no stereo sound even after you have inserted a Hi-Fi  
stereo videotape, press the Audio button until Hi-Fiappears  
on the on-screen display.  
3
Connect Audio Out (DVD only)  
3
Using RCA audio cables, connect the Left/Right Line Out jacks on  
the back panel of your DVD/VCR to the Left/Right Audio Line In  
jacks on your TV.  
To Left/Right Audio Inputs  
on Your TV  
When connecting your DVD-VCR to a TV with the S-Video or  
Component Video Output, make sure that you use these Line  
Out jacks.  
To activate your connection, see Alt Video Outon page 33.  
60  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Monitor TV Connections  
Connecting Other Video Equipment  
Monitor-style televisions offer improved sound and picture over  
You can connect a wide variety of audio/video equipment to your  
regular televisions because they receive the audio and video signals  
directly from the DVD-VCR through the line inputs.  
DVD-VCR, including:  
• An additional VCR  
• Laser Disc Player  
• DVD Player  
• Camcorder  
NOTE: A monitor television is not the same as a computer  
monitor.  
• Satellite Receiver  
• Video Game  
1
Connect VCR to Monitor TV  
Since all of these devices use essentially the same connections, they  
will be described together.  
To Monitor TV Audio/Video Inputs  
Connect RCA cables from the Audio/Video Line Out jacks on the  
back panel of the DVD-VCR to the Audio/Video Line Inputs of your  
monitor TV.  
TV Audio/Video Outputs of  
External Device  
1
2
3
Connect Device to DVD-VCR  
Connect RCA cables from the Audio and Video Line Outputs of  
your external device to the Audio and Video Line Inputs on the  
front or back panel of the DVD-VCR.  
2
3
Set TV to Auxiliary Mode  
Set your monitor TV to Aux,” “Video,or Line.Refer to your  
monitor television owners manual for the correct setting.  
Watch Device  
Connection is Complete  
NOTE: With this connection, the TV/VCR button has no effect. It is  
as if the TV/VCR button were always set to VCR.  
Play your external device, then press the INPUT SEL. button until  
the playback from LINE1 (rear panel inputs) or LINE2 (front panel  
inputs) appears on your TV screen.  
2,3  
Record Device  
First, play your external device. Next, press the INPUT SEL. button  
until the playback from LINE1 (rear panel inputs) or LINE2 (front  
panel inputs) appears on your TV screen. Then press Record on  
the VCR deck.  
3
3
4
Timer Record From Device  
Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer  
Record menu. All other Timer Record settings should be set in the  
usual manner.  
62  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Technical Specifications  
SAMSUNG COMBINATION DVD & VCR  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered  
new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in  
materials and workmanship for a limited warranty period of:  
AUDIO  
2 Stereo audio inputs, RCA Connector, -8dbm, 47K,  
front and rear  
One (1) Year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
Inputs  
VIDEO  
2 Composite video inputs, RCA Connector, 75, 1Vp-p  
Antenna or CATV Input, F-Connector, 75Ω  
RF  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
AUDIO  
1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ  
AUDIO (DVD only)  
2 Digital audio outputs (1 optical, 1 coaxial)  
1 Stereo audio outputs  
VIDEO  
1 Composite video output, RCA Connector, 75, 1Vp-p  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned  
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products  
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
Outputs  
VIDEO (DVD only)  
1 S-Video output, S-Connector, 75, Y=1.0Vp-p,  
C=0.286Vp-p  
1 Component video output, 75, Y=1.0Vp-p, Pb=0.7Vp-p,  
Pr=0.7Vp-p  
SAMSUNG ís obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are  
set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on  
an ”AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own  
warranties.  
RF  
Channel 3 or 4  
VIDEO SYSTEM  
1/2-inch VHS system, 4 rotary head helical scanning;  
FM azimuth luminance;chrominance: converted sub system  
phase shift  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the  
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the  
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for  
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,  
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,  
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or  
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer  
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered  
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,  
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free  
operation of the product.  
AUDIO TRACK  
Normal: 1 track; Hi-Fi: 2 track  
PLAY/RECORD TIME  
FF/REW TIME  
HEADS  
T-180 tape: SP 3 hours, SLP 9 hours  
T-120 tape: <2 minutes  
VCR  
Video: DA 4 rotary  
Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)  
Control:1 stationary head  
Erase: 1 full track, 1 audio track  
Less than 0.005% (Hi-Fi)  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE,  
AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE  
LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE  
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING  
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER  
AND PURCHASERíS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY  
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS  
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
WOW & FLUTTER  
FREQ. RESPONSE  
DISC COMPATIBILITY  
20-20,000 Hz (Hi-Fi)  
CD, CD-R, CD-R/W  
DVD-Video, CD-Digital Audio (5and 3.5),  
MP3 files on CD-ROM  
DVD  
FREQ. RESPONSE  
S/N RATIO  
96/48 kHz Sampling: 4 Hz-22kHz  
110 dB  
DYNAMIC RANGE  
THD  
96 dB  
0.003 %  
POWER REQUIREMENT  
ENVIRONMENT  
WEIGHT(NET)  
120V AC, 60 Hz, 25 watts  
41-104 F (5-40 C); 10%-75% humidity  
7.9 lbs.  
SYSTEM  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
DIMENSIONS(WxHxD)  
16.93 x 3.32 x 10.83 inches  
To obtain warranty hardware service, please contact SAMSUNG at:  
SAMSUNG CUSTOMER CARE CENTER  
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001  
1-800-SAMSUNG (1-800-726-7864) and www.SAMSUNGUSA.com  
64  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SAMSUNG ELECTRONICS AMERICA, INC.  
HEADQUARTERS  
105 Challenger Road, Ridgefield Park, N.J.  
07660-0511  
TEL: 1-800-SAMSUNG  
SERVICE DIVISION  
400 Valley Road, Suite 201, Mount Arlington, NJ 07856  
1-800-SAMSUNG (1-800-726-7864)  
ELECTRONICS  
AK68-00215A(01)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Stereo Amplifier PQ1000 User Guide
Quatech Switch Serial Device Server User Guide
R60 14, XTR80 105, XTR100 85, XTR150 56, XTR300 28, XTR600 14, XTR6 220, XTR8 200, XTR12 140, XTR20 84, XTR33 50, XTR40 42, XTR60 28, XTR80 215, XTR100 17, XTR150 112, XTR300 56, XTR600 User Guide
Roland Musical Instrument TU 12EX User Guide
Saeco Coffee Makers Coffee Grinder SG200E User Guide
Salton Mixer FSM126EM, FSM126RM, FSM126BKM, FSM126CBM, FSM126BRXM User Guide
Samsung Flat Panel Television LA32A330J1N User Guide
Samsung Projector SP P400B User Guide
Samsung Washer S1003J User Guide
Sennheiser Headphones DW Pro1 HS User Guide