Instruction Manual
ENG
DIGITAL HOME
THEATER SYSTEM
HT-X30/HT-X40
HT-TX35/HT-TX45
AH68-01937K
COMPACT
AH68-01660E
REV: 01
DIGITAL VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Contents
ENG
Multi-Disc Playback & FM Tuner
PREPARATION
SETUP
The HT-X30/HT-X40/HT-TX35/HT-TX45 combines the convenience of multi-disc playback capability, including DVD-
AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner,
all in a single player.
Safety Warnings ............................................................2
Precautions....................................................................3
Features.........................................................................4
Notes on Discs ..............................................................6
Description.....................................................................8
Settings........................................................................42
Setting the Language................................................42
Setting TV Screen Type............................................43
Setting Parental Controls (Rating Level) ..................44
Setting the Password................................................44
Setting the Wallpaper ...............................................45
To Select One of the 3 Wallpaper Settings
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range,
low-level resolution and high-frequency detail.
you've made..............................................................45
DVD Playback Mode.................................................46
DivX (R) Registration................................................46
Setting the Speaker Mode........................................46
Setting the Delay Time .............................................47
Setting the Test Tone ................................................48
Setting the Audio.......................................................49
Setting the DRC (Dynamic Range Compression) ....50
Setting the AV SYNC................................................50
Setting the HDMI Audio ............................................51
Sound Field (DSP)/EQ Function .................................52
Dolby Pro Logic II Mode..............................................53
Dolby Pro Logic II Effect..............................................54
CONNECTIONS
Connecting the Speakers ............................................12
USB Host support
You can enjoy media files such as pictures, movies and music saved on an MP3 player, digital camera or USB memory
stick by connecting the storage device to the USB port of the Home Theater.
Speaker Installation.....................................................14
Connecting the Optional Wireless
Receiving Amplifier......................................................15
Connecting the Video Out to your TV .........................18
Dolby Pro Logic II
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro
Logic.
HDMI Function.............................................................19
Connecting Audio from External Components ............20
Connecting the FM Antenna........................................22
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency
5.1 channel sound.
OPERATION
Before Reading the User's Manual .............................23
Before Using Your Home Theater ...............................24
Disc Playback..............................................................25
MP3/WMA-CD Playback .............................................26
JPEG File Playback.....................................................27
DivX Playback .............................................................28
Using the Playback Function.......................................30
Displaying Disc Information ......................................30
Checking the Remaining Time..................................31
Fast Playback ...........................................................31
Slow Playback ..........................................................31
Skipping Scenes/Songs............................................32
Repeat Playback.......................................................33
To Select a Repeat Playback Mode in the Disc
MISCELLANEOUS
TV Screen Saver Function
Listening to Radio........................................................55
Convenient Functions..................................................57
Operating a TV with the Remote Control ....................58
Troubleshooting ...........................................................60
Cautions on Handling and Storing Discs.....................62
Language Code List ....................................................63
USB Host Feature Supported Products ......................64
Specifications...............................................................65
If the main unit remains in Stop mode for 3 minutes, the Samsung logo appears on the TV screen.
The HT-X30/HT-X40/HT-TX35/HT-TX45 will automatically switch to the Power Saving mode after 20 minutes in the Screen
Saver mode.
Power Saving Function
The HT-X30/HT-X40/HT-TX35/HT-TX45 will automatically shut off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-X30/HT-X40/HT-TX35/HT-TX45 allows you to select your favorite image during JPEG, DVD or VCD playback
and set it as your background wallpaper.
Information Screen ...................................................33
A-B Repeat Playback................................................34
Step Function............................................................34
Angle Function..........................................................35
Zoom (Screen Enlarge) Function .............................35
Bonus Group.............................................................36
Navigating Pages......................................................36
Audio Language Selection Function.........................37
Subtitle Language Selection Function......................37
Moving Directly to a Scene/Song .............................38
Using the Disc Menu ................................................39
Using the Title Menu.................................................39
Playing Media Files using the USB Host feature ........40
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
Anynet+ (HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TV's that support
Anynet+.)
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
ENG
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
Disc Recording Format
realistic effects in the home, as if you were in a movie theater or concert hall.
This product does not support Secure (DRM) Media files.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
~
1
6
CD-R Discs
Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
•
The Region Number for this player is given on the rear panel of the player.
the disc.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Use a 650MB/74 minute CD-R disc.
•
Do not use CD-R discs over 700MB/80 minute as they may not be playback.
Some CD-RW (Rewritable) media, may not be playable.
•
Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
Playable Discs
•
be able to fully play the disc.
Disc Type
Mark (Logo)
Recorded Signals
Audio + Video
Disc Size
12cm
Max. Playing Time
CD-R MP3 Discs
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
DVD-AUDIO
DVD-VIDEO
•
•
•
•
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
8cm
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
COMPACT
12cm
8cm
74 min.
20 min.
74 min.
20 min.
Only files with the "mp3" and extensions can be played.
Audio
Audio + Video
AUDIO-CD
VIDEO-CD
DIGITAL VIDEO
Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc,
•
the disc can be played only up to the blank segment.
12cm
8cm
Audio + Video
DivX
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
•
•
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
A maximum of 500 tracks can be played per CD.
•
•
Do not use the following types of disc!
A maximum of 300 folders can be played per CD.
LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE, CHECK REGION CODE> message
appears on the TV screen.
•
•
CD-R JPEG Discs
Only files with the "jpg" extensions can be played.
•
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
•
•
•
•
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
Copy Protection
A maximum of 9,999 images can be stored on a single CD.
•
•
•
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
•
•
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVD R/RW, CD-R/RW DivX Discs
Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user
•
might not play.
Software updates for incompatible formats are not supported.
•
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
Sections with a high frame rate might not be played while playing a DivX file.
•
•
For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net".
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
ENG
Front Panel
Rear Panel
1
2
3
4
5
6
1
2
3
4
7
8
9
10 11 12
13
5
6
7
8
9
1. Disc Tray
6. Volume Control
11. MIC1 Jack
12. MIC2 Jack
1. Video Output Jack
5. 5.1 Channel Speaker Output Connectors
6. Cooling Fan
Connect the TV's Video Input jack (VIDEO IN) to
the VIDEO OUT jack.
2. Open/Close button
3. Function button
4. Stop ( ) button
7. Power (
) button
7. TX Card Connection (WIRELESS)
8. AUX IN 2 Jacks
8. Standby indicator
9. AUX IN 1 Connector
10. USB Connector
13.Tuning Up & Skip (
Tuning Down & Skip (
) button
) button
2. External Digital Optical Input Jack
Use this to connect external equipment capable of digital
output.
9. HDMI Output Jack
5. Play/Pause (
) button
3. Component Video Output Jacks
Connect a TV with component video inputs to these jacks.
4. FM 75Ω COAXIAL Jack
Display
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
13
14
15
17
19
16
18
1. DOLBY DIGITAL indicator
2. DTS Disc indicator
3. LINEAR PCM indicator
4. TITLE indicator
8. PROGRAM indicator
9. REPEAT indicator
10. PBC indicator
15. MPEG indicator
16. DSP indicator
FM Antenna
Remote Control
Video Cable
HDMI Cable
User's Manual
17. System Status Display
11. TUNER indicator
12. STEREO indicator
13. PRO LOGIC indicator
14. DVD AUDIO indicator
18. RADIO FREQUENCY indicator
19. SPEAKER indicator
5. GROUP indicator
6. CHAPTER indicator
7. TRACK indicator
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description (Con’t)
ENG
Remote Control
Insert Remote Batteries
1. DVD RECEIVER button
2. TV button
1
2
Remove the battery cover in the direction of the arrow.
Insert two 1.5V AAA batteries, paying attention to the correct polarities
(+ and –).
3. TV/VIDEO button
4. POWER button
1
2
3
19
20
5. Number (0~9) buttons
6. REMAIN button
7. STEP button
3
Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
4
21
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10.MENU button
• Do not expose the batteries to heat or a flame.
11. AUDIO button
5
12.
13.
PL II EFFECT button
PL II MODE button
14.TUNER MEMORY,
SD(Standard Definition)/HD(High Definition) button
15.ZOOM button
6
7
8
22
23
16.SLEEP button
17.SLOW, MO/ST button
18. ECHO, NT/PAL button
Operation Range of the Remote Control
24
25
19.
DVD button
The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operat-
ed at a horizontal angle of up to 30° from the remote control sensor.
TUNER button
9
USB, AUX button
20.OPEN/CLOSE button
21.DIMMER button
22.CANCEL button
23.REPEAT button
26
27
10
24.
PLAY/PAUSE button
STOP button
28
SEARCH buttons
25.TUNING/CH button
26.MUTE button
29
30
31
32
11
12
13
27.RETURN button
28.Cursor/ENTER button
29.SUBTITLE button
30.EXIT button
33
34
35
36
14
15
31.DSP/EQ button
32.INFO button
16
33.SOUND EDIT button
34.DIGEST button
35.TEST TONE button
36.MIC VOL button
37.SLIDE MODE button
38.LOGO button
17
37
38
18
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
ENG
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
HT-TX35/TX45
HT-X30/X40
Center Speaker
Front Speaker (R)
Front Speaker (L)
Center Speaker
Front Speaker (R)
Front Speaker (L)
Rear Speaker (R)
Rear Speaker (L)
Rear Speaker (R)
Rear Speaker (L)
Subwoofer
Subwoofer
Position of the DVD Player
Selecting the Listening Position
Place it on a stand or cabinet shelf, or under the TV stand.
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV. Example :
For 32" TVs 2~2.4m (6~8feet)
•
Connecting the Speakers
1
2
For 55" TVs 3.5~4m (11~13feet)
1
2
Press down the terminal tab on the back of the speaker.
L
R
Front Speakers
Black
Red
Insert the black wire into the black terminal (–) and the red wire
into the red (+) terminal, and then release the tab.
SL SR
Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
•
•
•
Rear Speakers
Place these speakers behind your listening position.
•
Place the speakers so that their tweeters will be at the same
height as your ear.
3
Connect the connecting plugs to the back of the Home Theater.
If there isn't enough room, place these speakers so they face
•
•
Make sure the colors of the speaker terminals match the colors of
the connecting plugs.
each other.
Align the front face of the front speakers with the front face of
the center speaker or place them slightly in front of the center
speakers.
Place them about 60 to 90cm (2 to 3feet) above your ear, fac-
•
ing slightly downward.
Unlike the front and center speakers, the rear speakers are
*
used to handle mainly sound effects and sound will not
come from them all the time.
C
Center Speaker
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
• Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
•
•
SW
Subwoofer
The position of the subwoofer is not so critical.
•
Place it anywhere you like.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Installation
Connecting the Optional Wireless Receiving Amplifier
ENG
You have the option of installing the speakers on Stands, or directly to the Stand Base.
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
Speaker Components (HT-TX35 only)
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-X30/X40
Center Speaker
Front Speaker (R)
Front Speaker (L)
SPEAKER
STAND
STAND BASE
Screw (A)
Screw (B)
How to Install the Speaker on the Stand
1
2
1
2
3
Turn the STAND upside-down and connect it to
the STAND BASE.
Insert two screws (A) into the two holes marked with arrows
using a screwdriver as shown in the illustration.
Subwoofer
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
Rear Speaker (L)
Rear Speaker (R)
3
4
4
5
Connect the assembled stand to the SPEAKER.
WIRELESS RECEIVER MODULE
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
HT-TX35/TX45
6
This is the SPEAKER successfully assembled with
the Stand.
Front Speaker (R)
Front Speaker (L)
5
6
•
Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
Center Speaker
How to Install the Speaker on the Stand Base
1
2
1
2
Connect the SPEAKER with the STAND BASE.
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
Subwoofer
3
This is the SPEAKER successfully assembled with
the Stand Base.
Rear Speaker (L)
Rear Speaker (R)
3
WIRELESS RECEIVER MODULE
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Optional Wireless Receiving Amplifier (Con’t)
ENG
Resetting the Wireless Receiving Module
Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not
light up and the "REAR CHECK" message blinks on the main unit's display.
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.
1
2
With the main unit turned off, press and hold the remote
control's REMAIN button for 5 seconds.
TX card
■
The STANDBY LED on the front panel of the wireless receiver module
blinks.
Slanted side faces down
With the wireless receiver module turned on, use a ball point
pen or a pair of toothpick to press the RESET button on the
back of the unit.
1
2
Connect the front, center and Subwoofer speakers to the DVD Player,
reffering to pages 12~14.
■
The STANDBY LED on the front panel of the wireless receiver module
blinks 2 Times.
With the DVD Player turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the main unit.
3
Turn on the main unit.
Hold the TX card so that the slanted side faces downward and insert the card into
the port.
■
The LINK LED of the wireless receiver module is lit and the Reset is
completed.
The TX card enables communication between the main unit and the wireless receiver.
■
If Power Standby mode continues, repeat Steps 1 to 3 above.
3
4
Connect the left and right rear speakers to the wireless receiving
module.
Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch ‘ON’.
• When the wireless receiving module setting is complete, no sound is output from the Rear Speaker Output
Connectors on the back of the main unit.
• The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and
moisture.
• For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
any obstructions.
• Do not insert a card other than the TX card dedicated for the product.
The product might be damaged or the card may not be removed easily.
• Do not insert the TX card upside down or in the reverse direction.
• Insert the TX card when the DVD Player is turned off. Inserting the card
when it is turned on may cause a problem.
•
Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode
only.
• In 2-CH mode, no sound will be heard from the wireless rear speakers.
• If the TX Card is inserted, sound is not output from the Rear Speaker
connectors on the main unit.
• Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close
to the main unit, some sound interruption may be heard due to interference.
• If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that
uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
• The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment.
If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may
not operate at all, because the radio wave cannot penetrate metal.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Function
Connecting the Video Out to your TV
ENG
Choose one of the three methods for connecting to a TV.
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
■
Resolutions available for the HDMI output are 576p(480p), 720p and 1080i.
■
SD(Standard Definition) resolution is 576p(480p) and HD(High Definition) resolution is 720p/1080i.
• If the TV does not support the configured resolution, you will not be able to see
the picture properly.
•
When an HDMI cable is connected, composite and component video signals are not
output.
METHOD 3
(supplied)
METHOD 1
(supplied)
METHOD 2
Why use HDMI (High Definition
Multimedia Interface)?
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
This device transmits a DVD
video signal digitally without
the process of converting to
analog. You will get sharper
digital pictures when using
an HDMI connection.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used
by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
1
2
Connect the main unit of the Home Theater to a Samsung TV with an HDMI
cable. (See page 18)
With Anynet+
METHOD 1 : HDMI ....... (Best Quality)
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play
button on your Samsung TV's
remote control.
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
METHOD 2 : Component Video ....... (Better Quality)
■
You can operate the Home Theater by using the TV remote control.
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input
jacks on your TV.
(Available TV buttons :
,
,
,
,
,
and
,
buttons,
~
button)
If you select the TV
Set the Anynet+(HDMI-CEC) to <On> on your TV.
METHOD 3 : Composite Video ....... (Good Quality)
■
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
MOVE ENTER
EXIT
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on
your TV.
If you select the THEATER
Select <THEATER to connector> and set the option of each items below.
• This product operates in Interlace scan mode (576i, 480i) for component output.
■
<View TV> : If Anynet+(HDMI-CEC) set to on and you select View TV, the Home Theater will
•
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate
the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs
that support Anynet+(HDMI-CEC).
automatically switched to DIGITAL IN.
■
<THEATER Menu> : You can access the Home Theater menu.
■
<THEATER Operation> : The Home Theater disc playback information will be displayed.
MOVE ENTER
EXIT
•
Please check the
logo (If your TV has an
logo, then it supports the Anynet+ function.)
■
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
• The Theater function is available only when you listen to the audio through
the Home Theater with the digital optical cable connected.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVDmode.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Audio from External Components
ENG
AUX1 : Front Panel
AUX2 : Rear Panel
OPTICAL : Rear Panel
Audio Cable
(not supplied)
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
Optical Cable
(not supplied)
AUX1 : Connecting an External Component/MP3 player
OPTICAL : Connecting an External Digital Component
Components such as an MP3 Player
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
1
2
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player.
Press the AUX button on the remote control to select <AUX1> input.
■
You can also use the FUNCTION button on the main unit.
2
Press the AUX button on the remote control to select <DIGITAL IN>.
The mode switches as follows : DVD/CD ■ DIGITAL IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD ■ DIGITAL IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Cooling Fan
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
The cooling fan supplies cool air to the unit to prevent overheating.
■
Be sure to match connector colors.
Please observe the following cautions for your safety.
2
Press the AUX button on the remote control to select <AUX2> input.
■
■
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD ■ DIGITAL IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM Antenna
Before Reading the User's Manual
ENG
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
Term
DVD
Definition
This involves a function available with DVD or
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
DVD
VCD
FM Antenna (supplied)
This involves a function available with a Video CD
(CD-R or CD-RW).
VCD
CD
This involves a function available with a data CD
(CD-R or CD-RW).
CD
MP3
JPEG
DivX
This involves a function available with CD-R/-RW discs.
MP3
JPEG
DivX
This involves a function available with CD-R/-RW discs.
This involves a function available with MPEG4 discs.
(
DVD R/RW CD-R or CD-RW)
,
This involves a case where a function does not
operate or settings may be cancelled.
CAUTION
NOTE
This involves tips or instructions on the page that help
each function operate.
1
2
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• In this manual, the instructions marked with "DVD (
)" are applicable to DVD-VIDEO, DVD-AUDIO
DVD
• This unit does not receive AM broadcasts.
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
Connecting Microphone
You can enjoy the feeling of a karaoke bar in the comfort of your home. Watch the video and sing along the lyrics
displayed on the TV screen against the accompaniment.
1
Connect the microphone to the MIC jack on the front panel.
■
You can connect up to two microphones.
2
3
Press the MIC VOL button to adjust the voice volume of the microphone.
Press the ECHO button to adjust the echo level of the microphone.
• If you hear strange noises (squealing or howling) while using the Karaoke feature,
move the microphone away from the speakers. Turning down the microphone vol-
ume or the speaker volume is also effective.
• When connected a MIC, HDMI output is not available.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using Your Home Theater
Disc Playback
DVD
VCD
CD
ENG
To Operate your Samsung TV and the Home Theater with the HT-X30/HT-TX35's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
2
Press the OPEN/CLOSE button to open the disc tray.
1
Plug the main unit's power cord into the AC power supply.
Load a disc.
■
Before plugging your system into a main socket, you must check the voltage setting.
■
Place a disc gently into the tray with the disc’s label facing up.
If the voltage of the socket does not correspond to the setting on the rear of the unit, you
may seriously damage your system.
3
Close the compartment by pressing the OPEN/CLOSE button again.
■
Playback starts automatically.
2
3
Press the TV button to set the remote to TV mode.
Press the POWER button to turn on your Samsung TV
with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
To stop playback, press the STOP (
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
)
button during playback.
■
5
6
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
If the PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
operate the DVD Home Theater
■
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
) button is pressed, playback starts from
Press the FUNCTION button on the main unit or DVD button
the beginning.
on the remote to enable DVD/CD playback.
To temporarily pause playback, press the PLAY/PAUSE
(
)
button during playback.
■
To resume playback, press the PLAY/PAUSE (
) button again.
• Depending on the content of the disc, the initial screen may appear different.
•
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) rec-
ommendations.
Selecting the Video Format
Press and hold the NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
By default, the video format is set to <PAL>.
<NTSC> or <PAL> will appear in the display. At this time, press the NT/PAL button shortly to
select between <NTSC> and <PAL>.
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA-CD Playback
JPEG File Playback
MP3
JPEG
ENG
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
Slide Mode
1
2
Place the MP3/WMA disc on the disc tray.
■
■
The MP3/WMA menu screen will appear and playback will start.
The appearance of the menu depends on the MP3/WMA disc.
1
2
Place the JPEG disc on the disc tray.
Playback starts automatically. Each image is displayed for 5 seconds and then the next
■
■
WMA-DRM files cannot be played.
image is displayed.
Press the SLIDE MODE button.
In Stop mode, use the Cursor
,
,
,
button to select the album,
■
Each time the button is pressed, the image makes the transition as follows :
and then press the ENTER button.
SLIDE SHOW MODE : 1~5
■
SLIDE SHOW MODE : RANDOM
■
■
Use the Cursor
,
button to select the track.
SLIDE SHOW MODE : NONE
3
4
To change the album, use the Cursor
,
,
,
button to select another
Press the
button to skip to the next slide.
album in Stop mode, and then press the ENTER button.
Each time the button is pressed, the slide moves backward or forward.
■
To select another album and track, repeat Steps 2 and 3 above.
Digest Function
Press the STOP ( ) button to stop playback.
You can view 9 JPEG images on the TV screen at once.
1
Press the DIGEST button during playback.
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
■
JPEG files will be shown in 9 windows.
2
Press the Cursor
,
,
,
button to select the desired image and
then press the ENTER button.
■
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the
button.
To play a file icon in the screen,
■
Press the Cursor
,
,
,
button when it is in Stop mode and select a desired icon from the top part of the menu.
Music File Icon : To play music files only, select the
Image File Icon : To view image files only, select the
Movie File Icon : To view movie files only, select the
All File Icon : To view movie files only, select the
Icon.
Icon.
Icon.
Icon.
Rotate/Flip Function
Press the Cursor
,
,
,
button during playback.
button: Flip Vertically
button: Rotate 90°
Clockwise
button: Rotate 90°
Counterclockwise
Original Image
button: Flip Horizontally
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
• If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is automat-
ically converted to 480p/576p mode.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX Playback
DivX
ENG
The functions on this page apply to DivX disc playback.
Skip Forward/Back
Subtitle Display
Press the SUBTITLE button.
During playback, press the
,
button.
■
Each time you press the button, your selection will toggle between <SUBTITLE (1/N, 2/N ...)>
■
Goes to the next file whenever you press the
button, if there are over 2 files in the disc.
button, if there are over 2 files in the disc.
and <SUBTITLE OFF>.
■
Goes to the previous file whenever you press the
■
If the disc has only one subtitle file, it will be played automatically.
■
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
Fast Playback
If the Disc has more than One Subtitle File
To play back the disc at a faster speed, press the
playback.
or
button during
If the disc has more than one subtitle file, the default subtitle may not match
the movie and you will have to select your subtitle language as follows:
■
Each time you press either button, the playback speed will change as follows:
2x ■ 4x ■ 8x ■ 32x ■ Normal.
1
2
In Stop mode, press the Cursor
,
button, select the desired subtitle (
)
from the TV screen, and then press the ENTER button.
5 Minute Skip function
When you select the desired DivX file from the TV screen, the movie will be
played normally.
During playback, press the Cursor
,
button.
■
Playback skips 5 minutes forward whenever you press the Cursor button.
Playback skips 5 minutes back whenever you press the Cursor button.
DivX(Digital internet video eXpress)
■
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time.
Zoom Function
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.
1. Supported Formats
1
2
Press the ZOOM button.
This product only supports the following media formats.If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
■
Each time you press the button, your selection will toggle between <ZOOM X2> and
<ZOOM OFF>.
Supported Video Formats
Press the Cursor
,
,
,
button to move to the area you want to enlarge.
Format
AVI
WMV
Supported Versions DivX3.11~DivX5.1, XviD V1/V2/V3/V7
• A DivX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
Supported Audio Formats
Format
Bit Rate
MP3
80~384kbps
WMA
56~128kbps
AC3
128~384kbps
44.1/48khz
DTS
1.5Mbps
44.1khz
Sampling Frequency
44.1khz
Audio Display
•
•
DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.
When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on
the screen during playback.
Press the AUDIO button.
■
If there are multiple audio tracks on a disc, you can toggle between them.
•
■
Each time you press the button, your selection will toggle between <AUDIO (1/N, 2/N ...)> and
.
2. Caption Function
•
You must have some experience with video extraction and editing in order to use this feature properly.
•
is displayed when there is one supported language in the disc.
•
To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CD1.avi
Samsung_007CD1.smi
•
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function
ENG
Displaying Disc Information
DVD
VCD
CD
MP3
JPEG
DivX
DVD
VCD
CD
MP3
Checking the Remaining Time
You can view disc playback information on the TV screen.
Press the REMAIN button.
■
For checking the total and remaining time of a title or chapter being played.
Press the INFO button.
Each time the Remain button is pressed
■
Each time the button is pressed, the display changes as follows:
TITLE ELAPSED ■ TITLE REMAIN ■ CHAPTER ELAPSED ■ CHAPTER REMAIN
DVD-VIDEO
DVD
GROUP ELAPSED ■ GROUP REMAIN ■ TRACK ELAPSED ■ TRACK REMAIN
DVD-AUDIO
The information
Display disappears
from the screen
TRACK ELAPSED ■ TRACK REMAIN ■ TOTAL ELAPSED ■ TOTAL REMAIN
VCD
MP3
CD
TRACK REMAIN ■ TRACK ELAPSED
VCD
CD
Fast Playback
DVD
VCD
CD
MP3
DivX
The information
Display disappears
from the screen
Press the
,
button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
2X ■
4X ■
8X ■
32X ■
PLAY
PLAY
MP3
JPEG
DivX
2X ■
4X ■
8X ■
32X ■
The information
Display disappears
from the screen
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC.
Slow Playback
DVD
VCD
DivX
appears on the TV screen!
Press the SLOW button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
If this symbol appears on the TV screen when pressing a button, that operation is not possible with
the disc currently being played.
1/2 ■ 1/4 ■ 1/8 ■ 1/2 ■ 1/4 ■ 1/8 ■
PLAY
DVD
VCD
DivX
Screen Display
1/2 ■ 1/4 ■ 1/6 ■
PLAY
PLAY
ELAPSED TIME display
STEREO (L/R) display
TITLE display
DVD display
1/2 ■ 1/4 ■ 1/8 ■
DVD
AUDIO
DVD-AUDIO display
CHAPTER display
TRACK (FILE) display
REPEAT PLAYBACK display
AUDIO LANGUAGE display
DOLBY DIGITAL display
ANGLE display
• No sound is heard during slow playback.
• Reverse slow playback does not work with VCD and DivX.
VCD display
CD display
GROUP display
SUBTITLE display
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
Skipping Scenes/Songs
DVD
VCD
MP3
Repeat Playback
DVD
VCD
CD
MP3
JPEG
DivX
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
Press the
,
button.
■
Each time the button is pressed during playback, the previous or next chapter, track or
directory (file) will be played.
Press the REPEAT button.
■
You cannot skip chapters consecutively.
Each time the button is pressed during playback, the repeat playback mode
changes as follows:
DVD
REPEAT : CHAPTER ■ REPEAT : TITLE ■ REPEAT : OFF
DVD-VIDEO
TITLE 01/05 CHAPTER 002/045
TITLE 01/05 CHAPTER 004/045
REPEAT : TRACK ■ REPEAT : GROUP ■ REPEAT : OFF
DVD-AUDIO
REPEAT : TRACK ■ REPEAT : DISC ■ REPEAT : OFF
VCD
MP3
CD
REPEAT : RANDOM ■ REPEAT : TRACK ■ REPEAT : DIR ■
JPEG
DivX
REPEAT : DISC ■ REPEAT : OFF
VCD
Repeat Playback Options
CHAPTER : Repeatedly plays the selected chapter.
TITLE : Repeatedly plays the selected title.
GROUP : Repeatedly plays the selected group.
RANDOM : Plays tracks in random order.
TRACK : Repeatedly plays the selected track.
DIR : Repeatedly plays all tracks in the selected folder.
DISC : Repeatedly plays the entire disc.
OFF : Cancels Repeat Playback.
(A track that has already been played may be played again.)
■
When watching a VCD with a track longer than 15 minutes, each time
playback will skip back or forward 5 minutes.
is pressed,
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To use Repeat Playback on a VCD
with PBC, you should set the MENU to OFF in the disc menu. (See page 39.)
MP3
To Select a Repeat Playback Mode in the Disc Information Screen
DVD
VCD
CD
1
2
3
Press the INFO button twice.
Press the Cursor button to move to REPEAT PLAYBACK (
) display.
Press the Cursor
button to select the desired Repeat Playback mode.
To select another album and track, repeat Steps 2 and 3 above.
4
Press the ENTER button.
DVD
VCD
CD
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information dis-
play screen.
33
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
A-B Repeat Playback
DVD
VCD
Angle Function
DVD
You can repeatedly play back a designated section of a DVD.
This function allows you to view the same scene in different angles.
1
Press the INFO button twice.
1
2
Press the INFO button.
■
For a VCD, press the INFO button once.
Press the Cursor button to move to ANGLE (
) display.
2
3
Press the Cursor button to move to REPEAT PLAYBACK (
) display.
3
Press the Cursor
,
button or numeric buttons to select the desired angle.
Press the Cursor
,
button to select <A-> and then press the ENTER button
■
Each time the button is pressed, the angle changes as follows:
at the beginning of the desired segment.
1/3
■
When the ENTER button is pressed, the selected position will be stored in memory.
2/3
3/3
4
Press the ENTER button at the end of the desired segment.
■
The specified segment will be played repeatedly.
A - B
• The Angle function works only with discs on which multiple angles have been recorded.
To return to normal playback, press the Cursor
OFF.
,
button to select
Zoom (Screen Enlarge) Function
DVD
VCD
DivX
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
This function allows you to enlarge a particular area of the displayed image.
1
2
3
Press the ZOOM button.
Press the Cursor
,
,
,
button to move to the area you want to enlarge.
Step Function
Press the ENTER button.
DVD
VCD
DivX
■
Each time the button is pressed, the zoom level changes as follows:
Press the STEP button.
■
ZOOM X 1.5 ■ ZOOM X 2 ■ ZOOM X 3 ■ ZOOM OFF
The picture moves forward one frame each time the button is pressed during playback.
SELECT ZOOM POSITION
• No sound is heard during step motion playback.
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
Bonus Group
Audio Language Selection Function
DVD-AUDIO
DVD
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging
for details and the key number.
1
2
Press the INFO button twice.
Press the Cursor
,
button or numeric buttons to select the desired audio
When you play a DVD-Audio disc that has a bonus group, the key number
language.
input screen appears automatically.
■
BONUS GROUP
Depending on the number of languages on a DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed.
KEY NUMBER :
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
SP 2/3
FR 3/3
Navigating Pages
DVD-AUDIO
Subtitle Language Selection Function
DVD
,
During playback, press the
button on the remote control.
You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images.
1
2
Press the INFO button twice.
Press the Cursor button to move to SUBTITLE ( ) display.
3
Press the Cursor button or numeric buttons to select the desired subtitle.
EN 1/3
EN 01/ 03
SP 02/ 03
OFF
FR 03/ 03
OFF / 03
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on
the remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
Moving Directly to a Scene/Song
Using the Disc Menu
DVD
VCD
CD
MP3
JPEG
DVD
VCD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
VCD
CD
1
2
Press the INFO button.
1
2
In Stop mode, press the MENU button.
■
When playing a VCD (version 2.0), this toggles between <MENU ON> and <MENU OFF>.
Press the Cursor
desired title/track (
Press the Cursor
,
button or numeric buttons to select the
Press the Cursor
,
button to move to <Disc Menu> and then press
) and then press the ENTER button.
the ENTER button.
3
4
,
button to move to the Chapter (
) display.
■
When you select Disc Menu and it is not supported by the disc, the <This menu is not
supported> message appears on the screen.
Press the Cursor
,
button or numeric buttons to select the
3
4
Press the Cursor
Press the ENTER button.
Press the EXIT button to exit the setup screen.
,
,
,
button to select the desired item.
desired chapter and then press the ENTER button.
Press the Cursor button to move to time ( ) display.
5
6
,
Press the numeric buttons to select the desired time and then press
MENU ON/OFF (PBC) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu
the ENTER button.
01/05
001/040
0:00:37
1/1
screen.
• MENU ON : This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled,
select <MENU OFF> to enable them.
MOVE
ENTER
EXIT
• MENU OFF : This VCD disc is version 1.1. The disc is played back in the same way as with
a music CD.
MP3
JPEG
Press the numeric buttons.
■
The selected file will be played.
• The disc menu display may be different depending on the disc.
■
When playing an MP3 or JPEG disc, you cannot use the Cursor
button to move to a folder.
button.
,
To move a folder, press the STOP ( ) and then press the Cursor
,
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this fea-
ture may vary.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Title Menu>.
,
• You can press the
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.
button on the remote control to move directly to the desired
Press the ENTER button.
■
The title menu appears.
Press the EXIT button to exit the setup screen.
• The Title menu display may be different depending on the disc.
MOVE
ENTER
EXIT
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Media Files using the USB Host Feature
ENG
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in
high quality video with 5.1 channel Home Theater sound by connecting the storage device to the USB port of the Home Theater.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
1
Connect the USB device to the USB port on the front of the unit.
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
2
3
Press the FUNCTION button on the DVD Player or the USB button on the
6. If you use a USB extension cable, the USB device might not be recognized.
remote control to select the USB mode.
■
<USB> appears on the display screen and then disappears.
Supported Formats
■
The USB MENU screen appears on the TV screen and the saved file is played.
File
extension
Sampling
Frequency
To stop playback, press the STOP ( ) button.
File name
Bit rate
Version
Pixel
x
Still Picture
Music
JPG
MP3
WMA
VCD
WMV
DivX
JPG .JPEG
.MP3
–
–
640 480
–
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
80~384kbps
56~128kbps
1.5Mbps
4Mbps
–
V8
–
–
44.1kHz
44.1kHz
44.1KHz
.WMA
MPG.MPEG .DAT
.WMV
VCD1.1,VCD2.0
V1,V2,V3,V7
DivX3.11~DivX5.1,XviD
320x480
(1) Press the STOP ( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
Movie
720x480 44.1KHz~48KHz
800x600 44.1KHz~48KHz
.AVI,.ASF
4Mbps
• CBI (Control/Bulk/Interrupt) is not supported.
• To listen to your music files with 5.1 channel home theater sound, you must set the Dolby
Pro Logic II mode to Matrix. (See page 53)
• Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
Skip Forward/Back
• Some MP3 players, when connected to this product, may not operate depending on the sector size
of their file system.
During playback, press the
■
button.
When there is more than one file and you press the
When there is more than one file and you press the
button, the next file is selected.
■
button, the previous file is selected.
• The USB host function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices. For information on
the supported devices, see page 64.
Fast playback
To play back the disc at a faster speed, press the
button during play-
back.
■
Each time you press either button, the playback speed will change as follows:
2x ■ 4x ■ 8x ■ 32x ■ Normal.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
GB
Setting the Language
Setting TV Screen Type
OSD(On-Screen Display) language is set to English by default.
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
1
2
3
4
In Stop mode, press the MENU button.
Press the Cursor button to move to <Setup> and then press the ENTER button.
Select <LANGUAGE> and then press the ENTER button.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor button to move to <TV DISPLAY> and then press
the ENTER button.
Press the Cursor
,
button to select <OSD LANGUAGE> and then press
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
the ENTER button.
4
Press the Cursor
,
button to select the desired item and then press
the ENTER button.
5
Press the Cursor
,
button to select the desired language and then press
Once the setup is complete, you will be taken to the previous screen.
the ENTER button.
Once the setup is complete, the OSD will be English if English has been selected as language.
Press the RETURN button to return to the previous level.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
Press the EXIT button to exit the setup screen.
Adj usting the TV Aspect Ratio (Screen Size)
• OSD LANGUAGE : Selecting the OSD Language
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is
called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
• AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
• DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
For a standard TV, select either <4:3PS> or <4:3LB> option according to personal preference. Select <WIDE/HDTV> if you have
a widescreen TV.
If the language you selected is not recorded on the disc, menu language will not change even
if you set it to your desired language.
MOVE
ENTER
RETURN
EXIT
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
■
You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).
• OTHERS : To select another language, select OTHER and enter the language code of your country.
(See page 63 for language codes) AUDIO, SUBTITLE and DISC MENU language can be
selected.
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
■
Black bars will appear at the top and bottom of the screen.
MOVE
SELECT
RETURN
EXIT
WIDE/HDTV
Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.
■
You can enjoy the widescreen aspect.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on the software,
the type of TV, and the TV aspect ratio setting.
• In HDMI operation, the screen is automatically converted to Wide mode.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
GB
Setting Parental Controls (Rating Level)
Setting the Wallpaper
DVD
JPEG
VCD
Use this to restrict playback of adult or violent DVDs you do not want children to view.
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
1
2
3
In Stop mode, press the MENU button.
1
2
During playback, press the PLAY/PAUSE button when an image you like appears.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
button to move to <PARENTAL> and then press
Press the LOGO button.
<COPY LOGO DATA> will be displayed on the TV screen.
Press the Cursor
the ENTER button.
3
The power will turn off and then back on.
MOVE
ENTER
RETURN
EXIT
The selected wallpaper will be displayed.
You can select up to 3 wallpaper settings.
4
Press the Cursor
,
button to select the desired rating level and then press
COPY LOGO DATA
the ENTER button.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
• This function will not work when the HDMI output is 720p or 1080i.
The higher the level, the closer the content is to violent or adult material.
5
Enter the password and then press the ENTER button.
The password is set to "7890" by default.
MOVE
SELECT
RETURN
EXIT
Once the setup is complete, you will be taken to the previous screen.
Press the RETURN button to return to the previous level.
To Select One of the 3 Wallpaper Settings you've made
Press the EXIT button to exit the setup screen.
1
2
3
4
In Stop mode, press the MENU button.
• This function works only if a DVD disc contains the rating level information.
Press the Cursor button to move to <Setup> and then press the ENTER button.
Press the Cursor button to move to <LOGO> and then press the ENTER button.
Setting the Password
Press the Cursor
,
button select the desired <USER>, and then press
MOVE
ENTER
RETURN
EXIT
the ENTER button
.
You can set the password for the Parental (rating level) setting.
This selects one of the 3 wallpaper screens
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Setup> and then press the ENTER button.
5
Press the EXIT button to exit the setup screen.
• ORIGINAL : Select this to set the Samsung Logo image as your wallpaper.
• USER : Select this to set the desired image as your wallpaper.
Press the Cursor button to move to <PASSWORD> and then press
the ENTER button.
MOVE
SELECT
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
4
5
Press the ENTER button.
Enter the password and then press the ENTER button.
Press the RETURN button to return to the previous level.
Enter the old password, a new password, and confirm new password.
Press the EXIT button to exit the setup screen.
The setting is complete.
• The password is set to "7890" by default.
MOVE
SELECT
RETURN
EXIT
If you have forgotten the rating level password, do the following
• While the player is in No DIsc mode, hold the main unit's STOP ( ) button for longer than 5 seconds. “INITIAL” appears on the
display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
GB
DVD Playback Mode
Setting the Delay Time
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio
signals from the center and rear speakers.
1
2
Press the MENU button while the disc tray is open.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
button to move to <DVD TYPE> and then press
Press the Cursor
button to move to <Audio> and then press the ENTER button.
3
Press the Cursor
Press the Cursor button to move to <DELAY TIME> and then press
the ENTER button.
the ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
4
Press the Cursor
,
button to move to <DVD VIDEO> and then press
4
5
Press the Cursor
press the ENTER button.
Press the Cursor to set the Delay time.
,
,
,
button to move to the desired speaker and then
the ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
,
You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and
15mSEC.
•
•
DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
DVD AUDIO : set to play the default DVD audio.
MOVE
ENTER
RETURN
EXIT
• DVD Play mode is set to DVD Audio as factory default setting.
Press the RETURN button to return to the previous level.
MOVE
CHANGE
RETURN
EXIT
• Powering off the main unit will automatically switch to the DVD Audio mode.
Press the EXIT button to exit the setup screen.
DivX (R) Registration
Setting up the Speaker Delay Time
Please use the Registration code to register this player with the DivX (R) video on demand format.
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by
adding a delay effect to the sound of the Center and Surround Speakers.
Setting the Speaker Mode
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure,
Ideal CENTER SPEAKER
placement
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.
set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc
Delay Time
0.00 m
0 ms
0.34 m
1 ms
0.68 m 1.02 m 1.36 m 1.70 m
2 ms 3 ms 4 ms 5 ms
1
2
3
4
In Stop mode, press the MENU button.
Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode
as 0ms. Otherwise, change the setting according to the table.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
In the <SPEAKER SETUP>, press the ENTER button again.
Ideal
Distance between Df and Dc
Delay Time
0.00 m
0 ms
1.02 m
3 ms
2.04 m 3.06 m 4.08 m 5.10 m
6 ms 9 ms 12 ms 15 ms
SURROUND
SPEAKER
placement
MOVE
ENTER
RETURN
EXIT
Press the Cursor
,
,
,
button to move to the desired speaker and then
press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL NONE.
It is desirable to place all speakers within this circle.
■
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
For L and R, the mode is set to SMALL.
•
•
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
MOVE
CHANGE
RETURN
EXIT
• With
(Dolby Pro Logic II), the delay time may be different for each mode.
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 53).
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is only adjustable on 5.1 channel discs.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
GB
Setting the Test Tone
Setting the Audio
Use the Test Tone feature to check the speaker connections.
You can adjust the balance and level for each speaker.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Audio> and then press the ENTER button
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Audio> and then press the ENTER button.
.
Press the Cursor button to move to <SOUND EDIT> and then press
Press the Cursor button to move to <TEST TONE> and then press
the ENTER button.
the ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
The test tone will be sent to L
■
C
■
R
■
SR
■
SL
■
SW in order.
4
Press the Cursor
Press the Cursor
,
button to select and adjust the desired item.
button to adjust the settings.
If the ENTER button is pressed again at this time, the test tone will stop.
,
Press the RETURN button to return to the previous level.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Press the EXIT button to exit the setup screen.
MOVE
CHANGE
RETURN
EXIT
STOP
EXIT
Manually Adj usting the Speaker Volume and Balance with the SOUND EDIT Button.
Alternative method: press the TEST TONE button on the remote.
Press the SOUND EDIT button and then press the Cursor
,
button.
Multi-Channel Pro Logic Mode
Press the TEST TONE button.
■
■
■
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected and that there is
no problem.
Start
When HDMI AUDIO is on (audio is produced through TV speakers),
the TEST TONE function is not available.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
SW: Subwoofer
To end the test tone, press the TEST TONE button again.
SL: Rear Speaker (L)
SR: Rear Speaker (R)
Adj usting Front/Rear Speaker Balance
• You can select between 00, -06, and OFF.
• The volume decreases as you move closer to –6.
Adj usting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
GB
Setting the DRC (Dynamic Range Compression)
Setting the HDMI Audio
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
2
3
In Stop mode, press the MENU button.
1
2
3
4
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
button to move to <Audio> and then press the ENTER button.
button to move to <DRC> and then press the ENTER button.
to adjust the DRC.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <HDMI AUDIO> and then press
Press the Cursor
,
the ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
When the Cursor
button is pressed, the effect is greater, and when the Cursor
button is
4
Press the Cursor
,
button to select <ON> or <OFF> and then press
pressed, the effect is smaller.
the ENTER button.
Press the RETURN button to return to the previous level.
•
•
ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
CHANGE
RETURN
EXIT
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
Setting the AV SYNC
Press the RETURN button to return to the previous level.
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
Press the EXIT button to exit the setup screen.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <AV-SYNC> and then press
the ENTER button.
MOVE
ENTER
RETURN
EXIT
4
Press the Cursor
,
button to select the AV-SYNC Delay Time and then
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
GB
Sound Field (DSP)/EQ Function
Dolby Pro Logic II Mode
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
You can select the desired Dolby Pro Logic II audio mode.
Press the
PL II MODE button.
Press the DSP/EQ button.
Each time the button is pressed, the mode changes as follows.
<DSP> appears on the display panel.
Each time the button is pressed, the selection changes as follows:
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• CINEMA : Adds realism to the movie soundtrack.
• PRO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right speakers.
• MATRIX : You will hear 5.1 channel surround sound.
STEREO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
• When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
•
•
•
•
•
•
•
POP, JAZZ, ROCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE : Provides the feeling of a movie theater.
CHURCH : Gives the feel of being in a grand church.
PASS : Select this for normal listening.
• The DSP/EQ function is only available in STEREO mode.
Press the
PL II mode button to show STEREO on the display.
• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and DSP/EQ function does not work.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
Listening to Radio
GB
Dolby Pro Logic II Effect
Remote Control
This function works only in Dolby Pro Logic MUSIC mode.
1
2
Press the TUNER button to select the FM band.
1
2
Press the
PL II MODE button to select <MUSIC> mode.
Tune in to the desired station.
Automatic Tuning 1 : When the
button is pressed, a preset broadcast station is selected.
,
Press the
PL II EFFECT button to select <PANORAMA>, then press
Automatic Tuning 2 : Press and hold the
button to automatically search for active
broadcasting stations.
the Cursor
,
button to select the desired effect setting.
,
Manual Tuning : Briefly press the
button to increase or decrease the frequency incrementally.
You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
Main Unit
1
2
Press the FUNCTION button to select the FM band.
3
4
Press the
the Cursor
PL II EFFECT button to select <C-WIDTH>, then press
Select a broadcast station.
,
button to select the desired effect setting.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press
You can select between 0 and 7.
the
button to select the preset station.
This sets the width of the center image. The higher the setting, the less sound comes from
the center speaker.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the button to automatically search the band.
Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press
the button to tune in to a lower or higher frequency.
Press the
PL II EFFECT button to select <DIMENS>, then press the Cursor
,
button to select the desired setting
Press the MO/ST button to listen in Mono/Stereo.
You can select between 0 and 6.
Incrementally adjusts the sound field (DSP) from the front or rear.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear, interference-free broadcast.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and the
(Dolby Pro Logic II) button does not work.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio (Con’t)
Convenient Functions
GB
Presetting Stations
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
Example : Presetting FM 89.10 in the memory
1
2
Press the TUNER button to select the FM band.
<SLEEP> will be displayed. Each time the button is pressed, the preset time changes as follows :
,
Press the
button to select <89.10>.
10 ■ 20■ 30■ 60■ 90■ 120■ 150■ OFF.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
3
4
Press the TUNER MEMORY button.
<PRGM> flashes in the display.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
Press the
button to select preset number.
the display.
You can select between 1 and 15 presets.
Adj usting Display Brightness
5
6
Press the TUNER MEMORY button again.
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the TUNER MEMORY button before <PRGM> disappears from the display.
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
<PRGM> disappears from the display and the station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
trol to select a channel.
button on the remote con-
• This unit does not receive AM broadcasts.
Mute Function
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
<MUTE> appears in the display.
To restore the sound, press the MUTE button again.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating a TV with the Remote Control
GB
When Operating a TV with the Remote Control
TV Brand Code List
1
2
3
Press the TV button to set the remote to TV mode.
No.
No.
Brand
Code
Brand
Code
Admiral (M.Wards)
56, 57, 58
MTC
18
1
2
3
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
Press the POWER button to turn on the TV.
A Mark
01, 15
NEC
18, 19, 20, 40, 59, 60
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12,
Nikei
03
While holding down the POWER button, enter the code corresponding
13, 14
Onking
03
to your brand of TV.
AOC
Bell & Howell (M.Wards)
Brocsonic
Candle
01, 18, 40, 48
Onwa
03
4
If there is more than one code listed for your TV in the table, enter one at a time to deter-
mine which code works.
57, 58, 81
Panasonic
Penney
Philco
06, 07, 08, 09, 54, 66, 67, 73, 74
5
59, 60
18
6
Example: For a Samsung TV
While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17
and 40.
18
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
7
Cetronic
Citizen
03
Philips
15, 17, 18, 40, 48, 54, 62, 72
8
03, 18, 25
Pioneer
Portland
Proton
63, 66, 80, 91
9
Cinema
97
4
If the TV turns off, the setting is complete.
10
11
12
13
14
15
16
17
18
19
20
15, 18, 59
Classic
03
40
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
Concerto
Contec
18
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
06, 66, 67
46
17, 48, 56, 60, 61, 75
Coronado
Craig
15
18, 59, 67, 76, 77, 78, 92, 93, 94
• The Remote control may not work on some brands of TVs. Also, some operations may
not be possible depending on your brand of TV.
03, 05, 61, 82, 83, 84
03, 19
Croslex
62
40
• If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Crown
03
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60,
Curtis Mates
CXC
59, 61, 63
98
03
Sanyo
Scott
19, 61, 65
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
Sears
15, 18, 19
Daytron
Dynasty
Emerson
Fisher
40
Sharp
15, 57, 64
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
03
Signature 2000 (M.Wards)
Sony
57, 58
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
50, 51, 52, 53, 55
19, 65
Soundesign
Spectricon
SSS
03, 40
Funai
03
01
Futuretech
General Electric (GE)
Hall Mark
Hitachi
03
18
06, 40, 56, 59, 66, 67, 68
Sylvania
Symphonic
Tatung
18, 40, 48, 54, 59, 60, 62
40
61, 95, 96
15, 18, 50, 59, 69
06
Inkel
45
Techwood
Teknika
18
03, 15, 18, 25
18, 40
JC Penny
JVC
56, 59, 67, 86
70
TMK
KTV
59, 61, 87, 88
Toshiba
19, 57, 63, 71
18
KEC
03, 15, 40
Vidtech
KMC
15
Videch
59, 60, 69
LG (Goldstar)
Luxman
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
Wards
15, 17, 18, 40, 48, 54, 60, 64
18
Yamaha
York
18
40
37
38
LXI (Sears)
Magnavox
Marantz
Matsui
19, 54, 56, 59, 60, 62, 63, 65, 71
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
Yupiteru
Zenith
03
39
40
41
42
43
40, 54
54
58, 79
01
Zonda
Dongyang
03, 54
MGA
18, 40
Mitsubishi/MGA
18, 40, 59, 60, 75
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
GB
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized
dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
Symptom
Check/Remedy
Is the power cord plugged securely into the outlet?
Turn off the power and then turn it back on.
•
•
Is the TV power on?
•
•
•
•
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Disc tray does not open.
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
Check the region number of the DVD.
•
•
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Playback does not start.
Audio language and subtitles
do not work.
Audio language and subtitles will not work if the disc does not con-
tain them.
•
Make sure that the rating level is correct.
Are you using a deformed disc or a disc with scratches on
the surface?
Wipe the disc clean.
Playback does not start
immediately when the
Play/Pause button is pressed.
•
•
Menu screen does not appear
even when the menu function is
selected.
Are you using a disc that does not contain menus?
•
•
No sound is heard during fast playback, slow playback, and step
motion playback.
Are the speakers connected properly? Is the speaker setup cor-
rectly customized?
•
•
•
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the appro-
priate function.
Sound is not produced.
Aspect ratio cannot be changed.
Is the disc severely damaged?
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
Turn off the power and hold the STOP (
for longer than 5 seconds.
)
button on the main unit
•
When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
•
PL II
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• The DVD player is not working
normally.
Sound can be heard only from a
few speakers and not all six.
•
•
While “NO DISC” message appears on the display of main unit, hold
the main unit's STOP ( ) button for longer than 5 seconds. “INITIAL”
•
The password for rating level
has been forgotten.
appears on the display and all settings will return to the default values.
Press the POWER button.
•
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
•
•
Dolby Digital 5.1 CH Surround
Sound is not produced.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM anten-
na in an area with good reception.
•
•
Can't receive radio broadcast.
Is the remote control being operated within its operation range of
angle and distance?
Are the batteries exhausted?
Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
•
The remote control does not
work.
•
•
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on Handling and Storing Discs
Language Code List
GB
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 42).
Code
Language
Code
Language
Code
Language
Code
Language
Handling discs
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1069
1066
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
Afar
Abkhazian
Afrikaans
Amharic
Arabic
1181
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
Frisian
Irish
1334
1345
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
Latvian, Lettish
Malagasy
Maori
1506
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
Slovenian
Samoan
Shona
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on
the surface.
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Do not stick paper or tape on the disc.
Assamese
Aymara
Azerbaijani
Bashkir
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Malay
Disc Storage
Byelorussian
Bulgarian
Bihari
Maltese
Burmese
Nauru
Keep in a clean
Protection j acket.
Store vertically.
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Bislama
Bengali; Bangla
Tibetan
Nepali
Tegulu
Dutch
Tajik
Indonesian
Icelandic
Italian
Norwegian
Occitan
Thai
Breton
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Catalan
Corsican
Czech
(Afan) Oromo
Oriya
Hebrew
Japanese
Yiddish
Punjabi
Welsh
Polish
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Danish
Javanese
Georgian
Kazakh
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Turkish
Tsonga
Tatar
German
Bhutani
Greek
Greenlandic
Cambodian
Kannada
Korean
Twi
English
Ukrainian
Urdu
Handling and Storing Discs
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Romanian
Russian
Uzbek
When you get fingerprints or dirt on the disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
Kashmiri
Kurdish
Kinyarwanda
Sanskrit
Vietnamese
Volapuk
Wolof
When cleaning, wipe gently from the inside to the outside of the
disc.
•
Kirghiz
Sindhi
Latin
Sangro
Xhosa
Fiji
Lingala
Serbo-Croatian
Singhalese
Slovak
Yoruba
Chinese
Zulu
Faeroese
French
Laothian
Lithuanian
• Condensation may form if warm air comes into contact with cold parts inside
the player. When condensation forms inside the player, the player may not
operate correctly. If this occurs, remove the disc and let the player stand for
1 or 2 hours with the power on.
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Host Feature Supported Products
Specifications
GB
Digital Camera
USB Flash Disc
Product
Company
Type
Product
Cruzer Micro
Company
Type
80W
Power Consumption
Weight
Finepix-A340
Fuji
Fuji
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Sandisk
Sandisk
Sandisk
Sony
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
4Kg
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Fuji
USB 2.0 256M
GENERAL
430 x 65 x 351.5 mm
+5°C~+35°C
10% ~ 75%
10dB
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Fuji
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
Fuji
Serotech
A.L tech
LG
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
Micro Mini
iFlash
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 128M
FM
TUNER
USB 2.0 64M
60dB
LG
USB 2.0 64M
0.5%
Distortion
RiDATA
USB 2.0 64M
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115Ω
133W x 2(3Ω)
133W(3Ω)
Composite Video
Component Video
MP3 Player
Nikon
VIDEO
OUTPUT
Nikon
Product
Company
Type
Nikon
HDMI
Creative MuVo NX128M
Iriver H320
YH-920
Creative
Iriver
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
Nikon
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Nikon
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
Nikon
YP-T7
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
133W x 2(3Ω)
135W(3Ω)
YP-MT6
YP-T6
MP3 Player
MP3 Player
U300
YP-53
MP3 Player
X-350
20Hz~20KHz
75dB
YP-ST5
MP3 Player
C-760
YP-T5
MP3 Player
C-5060
YP-60
MP3 Player
AMPLIFIER
X1
60dB
Channel separation
Input sensitivity
YP-780
MP3 Player
U-mini
YP-35
MP3 Player
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
(AUX)400mV
YP-55
MP3 Player
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
MP3 Player
Cowon
MP3 Player
Cowon
HDD MP3 Player
256MB MP3 Player
MP3 Player
Sharp
Optio-S50
Iriver
Optio 33LF
Optio MX
YP-T5 VB
YP-53
Samsung
Samsung
MP3 Player
256MB MP3 Player
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Nikon
USB External HDD
Nikon
Panasonic
Minolta
Olympus
Product
Company
Type
Dimage Xt
AZ-1
MOMOBAY UX-2
Dvico
USB 2.0
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
HT-X30/X40
Region
Country
Customer Care Center
Web Site
5.1ch speaker system
Front/Center/Rear speaker Subwoofer speaker
Speaker system
Impedance
3Ω x 5
3Ω
Frequency range
145Hz~20KHz
86dB/W/M
133W
35Hz~155Hz
86dB/W/M
135W
Output sound pressure level
SPEAKER
Rated input
Maximum input
266W
270W
Front/Rear
90 x 168x 95 mm
180 x 320 x 390 mm
5.5 kg
Dimensions (W x H x D)
Weights
Center
250 x 90 x 95 mm
0.6 Kg/0.5 Kg
0.7 Kg
Front/Rear
Center
HT-TX35/TX45
5.1ch speaker system
Speaker system
Front/Center/Rear speaker
3Ω x 5
Subwoofer speaker
3Ω
Impedance
Frequency range
140Hz~20KHz
82dB/W/M
35Hz~160Hz
85dB/W/M
135W
Output sound pressure level
Rated input
133W
SPEAKER
Maximum input
266W
270W
Front
90 x 1045 x 90 mm
Dimensions (W x H x D)
Weights
180 x 320 x 390 mm
5.1Kg
Rear
90 x 1045 x 90 mm
Center
250 x 90 x 95 mm
3.5Kg/3.2Kg
0.5Kg
Front/Rear
Center
66
Download from Www.Somanuals.com. All Manuals Search And Download.
|