Instruction Manual
ENG
DIGITAL HOME
THEATER SYSTEM
HT-X250
HT-TX250
EJECT
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
AH68-01943K
COMPACT
AH68-
01660E
REV: 01
DIGITAL VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Contents
ENG
Multi-Disc Playback & FM Tuner
The HT-X250/HT-TX250 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-
VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single
player.
PREPARATION
SETUP
Settings........................................................................44
Setting the Language.............................................44
Setting TV Screen type..........................................45
Setting Parental Controls (Rating Level) ...............46
Setting the Password.............................................46
Setting the Wallpaper.............................................47
To Select One of the 3 Wallpaper Settings
Safety Warnings ............................................................2
Precautions....................................................................3
Features.........................................................................4
Notes on Discs ..............................................................6
Description.....................................................................8
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in terms of dynamic range,
low-level resolution and high-frequency detail.
you've made...........................................................47
DVD Playback Mode ............................................48
DivX (R) registration...............................................48
Setting the Speaker Mode .....................................48
Setting the Delay Time...........................................49
Setting the Test Tone .............................................50
Setting the Audio....................................................51
Setting the DRC (Dynamic Range Compression)......52
Setting the AV SYNC .............................................52
Setting the HDMI Audio .........................................53
Sound Field (DSP)/EQ Function .................................54
Dolby Pro Logic II Mode..............................................55
Dolby Pro Logic II Effect..............................................56
CONNECTIONS
USB Host support
Connecting the Speakers ............................................12
Speaker Installation.....................................................14
Connecting the optional Wireless Receiving Amplifier.....15
Installing the Main Unit................................................18
Connecting the Video Out to TV..................................20
HDMI Function.............................................................21
Connecting Audio from External Components ............22
Connecting the FM Antenna........................................24
You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using
the Home Theater's USB HOST function.
Dolby Pro Logic II
Dolby Pro Logic II is a form of multi-channel audio signal decoding technology that improves upon existing Dolby Pro
Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It delivers full-frequency
5.1 channel sound.
OPERATION
MISCELLANEOUS
Before Reading the User's Manual .............................25
Before Using Your Home Theater ...............................26
Disc Playback..............................................................27
MP3/WMA-CD Playback .............................................28
JPEG File Playback.....................................................29
DivX Playback .............................................................30
Using the Playback Function.......................................32
Displaying Disc Information....................................32
Checking the Remaining Time................................33
Fast Playback .........................................................33
Slow Playback ........................................................33
Skipping Scenes/Songs..........................................34
Repeat Playback.....................................................35
To Select a Repeat Playback Mode in the Disc
TV Screen Saver Function
Listening to Radio........................................................57
Convenient Functions..................................................59
Operating a TV with the Remote Control ..................60
Troubleshooting .........................................................62
Cautions on Handling and Storing Discs ..................64
Language Code List ..................................................65
USB Host Feature Supported Products ....................66
Specifications ............................................................67
If the main unit remains in stop mode for 3 minutes, the Samsung logo appears on TV screen.
The HT-X250/HT-TX250 automatically switches itself into the power saving mode after 20 minutes in the Screen Saver
mode.
Power Saving Function
The HT-X250/HT-TX250 automatically shuts itself off after 20 minutes in Stop mode.
Customized TV Screen Display
The HT-X250/HT-TX250 allows you to select your favorite image during JPEG, DVD or VCD playback and set it as your back-
ground wallpaper.
Information Screen .................................................35
A-B Repeat Playback .............................................36
Step Function..........................................................36
Angle Function........................................................37
Zoom (Screen Enlarge) Function ...........................37
EZ VIEW Function..................................................38
Bonus Group...........................................................38
Navigating Pages....................................................38
Audio Language Selection Function.......................39
Subtitle Language Selection Function....................39
Moving Directly to a Scene/Song ...........................40
Using the Disc Menu...............................................41
Using the Title Menu...............................................41
Playing Media Files using the USB Host feature ........42
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
Anynet+(HDMI-CEC) Function
Anynet+ is a function that can be used to operate the main unit using a Samsung TV remote control, by connecting the
Home Theater to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support
Anynet+.)
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
ENG
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
Disc Recording Format
realistic effects in the home, as if you were in a movie theater or concert hall.
This product does not support Secure (DRM) Media files.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
~
1
6
CD-R Discs
Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
•
The Region Number for this player is given on the rear panel of the player.
the disc.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Use a 650MB/74 minute CD-R disc.
•
Do not use CD-R discs over 700MB/80 minute as they may not be playback.
Some CD-RW (Rewritable) media, may not be playable.
•
Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not
•
Playable Discs
be able to fully play the disc.
Disc Type
Mark (Logo)
Recorded Signals
Audio + Video
Disc Size
12cm
Max. Playing Time
CD-R MP3 Discs
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
•
•
•
•
DVD-AUDIO
DVD-VIDEO
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
8cm
Only files with the "mp3" and extensions can be played.
COMPACT
Audio
12cm
8cm
74 min.
20 min.
74 min.
20 min.
AUDIO-CD
VIDEO-CD
Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc,
•
DIGITAL VIDEO
Audio + Video
the disc can be played only up to the blank segment.
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
•
•
12cm
8cm
Audio + Video
Divx
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
A maximum of 500 tracks can be played per CD.
•
•
A maximum of 300 folders can be played per CD.
Do not use the following types of disc!
CD-R JPEG Discs
Only files with the "jpg" extensions can be played.
•
LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
If such discs are played, a <WRONG DISC FORMAT> message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a <CAN'T PLAY THIS DISC PLEASE,CHECK REGION CODE> message
appears on the TV screen.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
•
•
•
•
•
•
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
A maximum of 9,999 images can be stored on a single CD.
•
•
•
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
Copy Protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
•
•
DVD R/RW, CD-R/RW DivX Discs
Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the user
•
might not play.
Software updates for incompatible formats are not supported.
•
(Example : QPEL, GMC, resolution higher than 800 x 600 pixels, etc.)
Sections with a high frame rate might not be played while playing a DivX file.
•
•
For more information about the formats authorized by DivX Networks, Inc., please visit "www.divxnetworks.net".
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
ENG
Front Panel
Side Panel
1
2
3
4
5
6
7
8
9
10
1. Power (
) button
1
2
1. Headphone Jack
2. AUX IN 1 Jack
3. USB Port
2. Disc Insert Hole
3. Display
4. Eject button
3
5. Function button
6. Tuning Down & Skip (
7. Stop ( ) button
) button
8. Play/Pause (
) button
9. Tuning Up & Skip (
10.Volume Control button
) button
Rear Panel
Accessories
1
2
3
4
5
FM Antenna
HDMI Cable
Remote Control
Video Cable
User's Manual
12 11
9
8
7
6
10
1. 5.1 Channel Speaker Output Connectors
2. Component Video Output Jacks
Connect a TV with Component video inputs to these jacks.
3. Video Output Jack
5. HDMI OUT Jack
6. TX Card Connection(WIRELESS)
7. AUX IN 2 Jacks
8. FM 75Ω COAXIAL Jack
9. Stand
Connect your TV's Video Input jack (VIDEO IN) to
the VIDEO OUT Jack on this unit.
10.Cable Tie
4. External Digital Optical Input Jack
11. Stand Fix Hole
12. Cooling Fan
Use this to connect external equipment capable of digital output.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Description (Con’t)
ENG
Remote Control
Insert Remote Batteries
1. DVD RECEIVER button
2. TV button
1
2
Remove the battery cover in the direction of the arrow.
Insert two 1.5V AAA batteries, paying attention to the correct polarities
(+ and –).
3. TV/VIDEO button
4. POWER button
1
2
3
19
20
5. Number (0~9) buttons
6. REMAIN button
7. STEP button
3
Replace the battery cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
• Use the correct type of batteries. Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
4
21
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10.MENU button
• Do not expose the batteries to heat or a flame.
5
11. AUDIO button
12.
13.
PL II EFFECT button
PL II MODE button
14.TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
15.ZOOM button
6
7
8
22
23
16.SLEEP button
Operation Range of the Remote Control
24
25
17.SLOW, MO/ST button
18. EZ VIEW, NT/PAL button
The remote control can be used up to approximately 7 meters in a straight line. It can also be operated
at a horizontal angle of up to 30° from the remote control sensor.
19.
DVD button
9
TUNER button
USB, AUX button
26
27
20.EJECT button
21.DIMMER button
22.CANCEL button
23. REPEAT button
10
28
24.
PLAY/PAUSE button
STOP button
SEARCH buttons
29
30
11
12
13
25.TUNING/CH button
26. MUTE button
31
32
14
15
16
33
34
27. RETURN button
28. Cursor/ENTER button
29. SUBTITLE button
30. EXIT button
35
36
17
18
31. DSP/EQ button
32.INFO button
33. SOUND EDIT button
34. DIGEST button
35. TEST TONE button
36. SLIDE MODE button
37. LOGO button
37
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
ENG
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
HT-X250
HT-TX250
Front Speaker (L)
Front Speaker (L)
Front Speaker (R)
Front Speaker (R)
Center Speaker
Center Speaker
SUB
Subwoofer
Subwoofer
Rear Speaker (R)
Rear Speaker (L)
Rear Speaker (R)
Rear Speaker (L)
Connecting the Speakers
Position of the DVD Player
Selecting the Listening Position
Place it on a stand or cabinet shelf, or under the TV stand.
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
•
1
2
1
2
Press down the terminal tab on the back of the speaker.
Black
Red
Insert the black wire into the black terminal (–) and the red
wire into the red (+) terminal, and then release the tab.
For 55" TVs 3.5~4m (11~13feet)
L
R
Front Speakers
3
Connect the connecting plugs to the back of the Home
Theater.
SL SR
Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
•
•
•
Rear Speakers
Place these speakers behind your listening position.
•
Place the speakers so that their tweeters will be at the same
height as your ear.
■
Make sure the colors of the speaker terminals match the colors of the
connecting plugs.
If there isn't enough room, place these speakers so they face
•
each other.
Align the front face of the front speakers with the front face of
the center speaker or place them slightly in front of the center
speakers.
Place them about 60 to 90cm (2 to 3feet) above your ear, fac-
•
ing slightly downward.
Unlike the front and center speakers, the rear speakers are
*
used to handle mainly sound effects and sound will not
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
• Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
come from them all the time.
C
Center Speaker
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
•
•
SW
Subwoofer
• Do not hang the subwoofer on the wall through the duct (hole).
The position of the subwoofer is not so critical.
•
Place it anywhere you like.
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated
by the speaker. If this occurs, place the speaker away from your TV set.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Installation
Connecting the Optional Wireless Receiving Amplifier
ENG
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-X250
How to Install the Speaker and the Stand
1
2
1
2
Turn the STAND upside-down and connect it to
Front Speaker (R)
Front Speaker (L)
the STAND BASE.
Turning the screw (A) clockwise, connect it to two holes
marked with the arrow using a screwdriver as shown in
the illustration.
Center Speaker
3
Turning the supplied screw (B) clockwise, connect it to a
hole on the rear of the Speaker STAND.
3
4
Subwoofer
4
5
Connect the assembled stand to the SPEAKER.
Turning the screw (B) clockwise, connect to a hole on
the rear of the speaker using a screwdriver as shown
in the illustration.
6
This is the successfully assembled speaker.
5
6
Rear Speaker (L)
Rear Speaker (R)
•
Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
WIRELESS RECEIVER MODULE
Component
HT-TX250
Front Speaker (R)
Front Speaker (L)
STAND BASE
Center Speaker
SPEAKER
STAND
Screw (A)
Screw (B)
Subwoofer
Rear Speaker (L)
Rear Speaker (R)
WIRELESS RECEIVER MODULE
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Optional Wireless Receiving Amplifier (Con’t)
ENG
Resetting the Wireless Receiving Module
Reset the system if a communication failure occurs, or if the Link indicator (blue LED) on the wireless receiver does not
light up and the "REAR CHECK" message blinks on the main unit's display.
Reset the system while the main unit and the wireless receiver module (SWA-3000) are in Power Standby mode.
1
2
With the main unit turned off, press and hold the remote
control's REMAIN button for 5 seconds.
■
The STANDBY LED on the front panel of the wireless receiver module
blinks.
With the wireless receiver module turned on, use a ball point
TX card
pen or a toothpick to press the RESET button on the back of
the unit.
Slanted side faces down
■
The STANDBY LED on the front panel of the wireless receiver module
blinks 2 Times.
3
Turn on the main unit.
■
The LINK LED of the wireless receiver module is lit and the Reset is com-
1
2
Connect the Front, Center and Subwoofer speakers to the DVD Player,
referring to pages 12~14.
pleted.
■
If Power Standby mode continues, repeat Steps 1 to 3 above.
With the DVD Player turned off, insert the TX card into the TX Card
Connection(WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces downward and insert the
card into the port.
The TX card enables communication between the main unit and the wireless receiver.
3
4
Connect the left and right rear speakers to the wireless receiving
module.
• When the wireless receiving module setting is complete, no sound is output from the Rear Speaker Output
Connectors on the back of the main unit.
• The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and
moisture.
• For optimal listening performance, make sure that the area around the wireless receiver module location is clear of
any obstructions.
Plug the power cord of the wireless receiving module in the wall outlet
and switch the power switch ‘ON’.
• Sound will be heard from the wireless rear speakers in DVD 5.1-CH or Dolby Pro Logic II mode only.
• In 2-CH mode, no sound will be heard from the wireless rear speakers.
• Do not insert a card other than the TX card dedicated for the product.
The product might be damaged or the card may not be removed easily.
• Do not insert the TX card upside down or in the reverse direction.
• Insert the TX card when the DVD Player is turned off.
Inserting the card when it is turned on may cause a problem.
• If the TX Card is inserted, sound is not output from the Rear Speaker
connectors on the main unit.
• Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close
to the main unit, some sound interruption may be heard due to interference.
• If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that
uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
• The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment.
If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may
not operate at all, because the radio wave cannot penetrate metal.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Main Unit
ENG
Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Method 2 : Installing the Stand so that the DVD Player Stands up.
Preparation
Preparation
■
■
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
■
■
1
2 3
4
1
2 3
4
1
Turn the stand counter-clockwise and pull it apart.
1
Turn the stand in the direction of the arrow and pull it apart.
■
The DVD Player and stand are separated.
■
The DVD player and stand are separated.
2
3
4
Hold the DVD Player and stand as shown by the figure and turn
the right side of the stand upward so that it is slightly slanted.
2
3
Lift the right side of the stand so that it is slightly slanted.
Insert the 2 stand anchors into the holes on the bottom of the
DVD Player.
Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the bottom of
the DVD Player.
Turn the right side of the stand clockwise to fix it to the back of the
DVD Player.
Arranging the Cables
• Be careful not to scratch the surface the DVD Player when installing
the stand.
•
Do not turn the DVD Player left or right as it may separate it from the stand.
Use the cable tie to keep the cables together.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Video Out to your TV
HDMI Function
ENG
Choose one of the three methods for connecting to a TV.
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
■
Resolutions available for the HDMI output are 480p, 720p and 1080i.
■
SD(Standard Definition) resolution is 480p and HD(High Definition) resolution is 720p/1080i.
•
If the TV does not support the configured resolution, you will not be able to see the picture prop-
erly.
Why use HDMI (High Definition
Multimedia Interface)?
METHOD 1
METHOD 2
METHOD 3
• When an HDMI cable is connected, composite and component video signals
(supplied)
(supplied)
This device transmits a DVD
video signal digitally without
the process of converting to
analog. You will get sharper
digital pictures when using an
HDMI connection.
are not output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by
connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
METHOD 1 : HDMI ....... (Best Quality)
1
2
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable.
(See page 20)
With Anynet+
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play
button on your Samsung TV's
remote control.
Set the Anynet+ function on your TV.
METHOD 2 : Component Video .... (Better Quality)
(See the TV instruction manual for more information.)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks on your TV.
■
You can operate the Home Theater by using the TV remote control.
(Available TV buttons :
,
,
,
,
,
and
,
buttons,
~
button)
If you select TV
METHOD 3 : Composite Video ....... (Good Quality)
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
■
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack
on your TV.
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
MOVE ENTER
EXIT
If you select the THEATER
Select <THEATER to connector> and set the option of each items below.
•
•
This product operates in Interlace scan mode (480i Only) for Component Output.
After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
■
<View TV> : If Anynet+ (HDMI-CEC) is on and you select View TV, the Home Theater
will automatically switch to DIGITAL IN.
■
<THEATER Menu> : You can access the Home Theater menu.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate
the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that sup-
port Anynet+(HDMI-CEC).
■
<THEATER Operation> : The Home Theater disc playback information will be displayed.
■
•
•
<Receiver : On> : You can listen to audio through the Home Theater.
■
<Receiver : Off> : You can listen to audio through the TV.
MOVE
ENTER
EXIT
• When selecting View TV, you must have a digital optical cable connected from the
TV to the Home Theater listen to the TV sound through the Home Theater.
• If Anynet+ (HDMI-CEC) is on and you turn off the main unit,
your TV will also turn off.
Please check the
logo. If your TV has an
logo, then it supports the Anynet+ function.
• Anynet+ (HDMI-CEC) will only work while in the DVD mode.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Audio from External Components
ENG
AUX1 : Side Panel
AUX2 : Rear Panel
OPTICAL : Rear Panel
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
Audio Cable
(not supplied)
Optical Cable
(not supplied)
AUX1 : Connecting an External Analog Component
OPTICAL : Connecting an External Digital Component
Analog signal components such as an MP3 Player.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
1
2
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external analog component.
Press the AUX button on the remote control to select <AUX1> input.
■
You can also use the FUNCTION button on the main unit.
2
Press the AUX button on the remote control to select <D.IN>.
The mode switches as follows : DVD ■ D.IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ■ D.IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■
Be sure to match connector colors.
2
Press the AUX button on the remote control to select <AUX2> input.
■
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ■ D.IN ■ AUX 1 ■ AUX 2 ■ USB ■ FM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the FM Antenna
Before Reading the User's Manual
ENG
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
Term
DVD
Definition
This involves a function available with DVD or
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
DVD
VCD
This involves a function available with a Video CD
(CD-R or CD-RW).
VCD
CD
This involves a function available with a data CD
(CD-R or CD-RW).
CD
MP3
JPEG
DivX
FM Antenna (supplied)
discs
This involves a function available with CD-R/-RW
.
MP3
JPEG
DivX
This involves a function available with CD-R/-RW discs.
This involves a function available with MPEG4 discs.
DVD R/RW, CD-R or CD-RW)
(
This involves a case where a function does not
operate or settings may be cancelled.
CAUTION
NOTE
This involves tips or instructions on the page that
help each function operate.
1
2
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• In this manual, the instructions marked with "DVD (
)" are applicable to DVD-VIDEO, DVD-AUDIO
DVD
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• This unit does not receive AM broadcasts.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
• Depending on the content of the disc, the initial screen may appear different.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
■
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
■
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.)
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using Your Home Theater
Disc Playback
DVD
VCD
CD
ENG
To Operate your Samsung TV and the Home Theater with the HT-X250/HT-TX250's Remote Control
1
Load a disc vertically into the Disc Insert Hole.
■
The DVD Home Theater's remote can be used to control Samsung TVs.
Insert a disc so that the label side faces facing forward.
■
Playback starts automatically.
1
Plug the main unit's power cord into the AC power supply.
■
Before plugging your system into a main socket, you must check the voltage setting.
ALL
If the voltage of the socket does not correspond to the setting on the rear of the unit,
you may seriously damage your system.
2
3
Press the TV button to set the remote to TV mode.
Press the POWER button to turn on your Samsung TV
with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
2
To eject the disc, press the EJECT button.
5
6
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
To stop playback, press the STOP button during playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
■
operate the DVD Home Theater
If the PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
Press the FUNCTION button on the main unit or DVD button
■
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
) button is pressed, playback starts from the
on the remote to enable DVD playback.
beginning.
To temporarily pause playback, press the PLAY/PAUSE
(
)
button during playback.
■
To resume playback, press the PLAY/PAUSE (
) button again.
Selecting the Video Format
Press and hold the NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
• Depending on the content of the disc, the initial screen may appear different.
•
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.
■
By default, the video format is set to <PAL>.
■
<NTSC> or <PAL> will appear in the display. At this time, press the NT/PAL button shortly to select
between <NTSC> and <PAL>.
■
Each country has a different video format standard.
■
For normal playback, the video format of the disc must be the same as the video format of your TV.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA-CD Playback
JPEG File Playback
MP3
JPEG
ENG
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
Slide Mode
1
2
Load the MP3 disc.
■
The MP3/WMA menu screen will appear and playback will start.
The appearance of the menu depends on the MP3/WMA disc.
1
2
Load the JPEG disc.
■
■
■
Playback starts automatically. Each image is displayed for 5 seconds and then the next
WMA-DRM files cannot be played.
imageis displayed.
Press the SLIDE MODE button.
In Stop mode, use the Cursor
,
,
,
button to select the album,
■
Each time the button is pressed, the image makes the transition as follows:
and then press the ENTER button.
SLIDE SHOW MODE : 1~5 ■ SLIDE SHOW MODE : RANDOM ■ SLIDE SHOW MODE : NONE
■
Use the Cursor
,
button to select the track.
Press the
button to skip to the next slide.
■
3
4
To change the album, use the Cursor
,
,
,
button to select another
Each time the button is pressed, the slide moves backward or forward.
album in Stop mode, and then press the ENTER button.
Digest Function
■
To select another album and track, repeat Steps 2 and 3 above.
Press the STOP ( ) button to stop playback.
You can view 9 JPEG images on the TV screen at once.
1
2
Press the DIGEST button during playback.
■
JPEG files will be shown in 9 windows.
Press the Cursor
button to select the desired image and
,
,
,
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
then press the ENTER button.
■
The selected image is played for 5 seconds before moving to the next image.
To view the previous or next 9 images, press the
button.
To play a file icon in the screen,
Press the Cursor
,
,
,
button when it is in Stop mode and select a desired icon from the top part of the menu.
Music File Icon : To play music files only, select the
Image File Icon : To view image files only, select the
Movie File Icon : To view movie files only, select the
All File Icon : To view movie files only, select the
Icon.
Icon.
Icon.
Rotate/Flip Function
Icon.
Press the Cursor
,
,
,
button
during playback.
button: Flip Vertically
button: Rotate 90°
Clockwise
button: Rotate 90°
Counterclockwise
Original Image
button: Flip Horizontally
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
• If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is automat-
ically converted to 480p/576p mode.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX Playback
DivX
ENG
The functions on this page apply to DivX disc playback.
Skip Forward/Back
Subtitle Display
Press the SUBTITLE button.
During playback, press the
,
button.
■
Each time you press the button, your selection will toggle between <SUBTITLE (1/N, 2/N ...)>
■
Goes to the next file whenever you press the
button, if there are over 2 files in the disc.
button, if there are over 2 files in the disc.
and <SUBTITLE OFF>.
■
Goes to the previous file whenever you press the
■
If the disc has only one subtitle file, it will be played automatically.
■
See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.
Fast Playback
If the Disc has more than One Subtitle File
To play back the disc at a faster speed, press the
or
button during playback.
■
If the disc has more than one subtitle file, the default subtitle may not match the
movie and you will have to select your subtitle language as follows:
Each time you press either button, the playback speed will change as follows:
2x ■ 4x ■ 8x ■ 32x ■ Normal.
1
2
In Stop mode, press the Cursor
,
button, select the desired subtitle (
)
from the TV screen, and then press the ENTER button.
5 Minute Skip function
When you select the desired DivX file from the TV screen, the movie will be
played normally.
During playback, press the Cursor
,
button.
■
Playback skips 5 minutes forward whenever you press the Cursor
Playback skips 5 minutes back whenever you press the Cursor
button.
button.
DivX(Digital internet video eXpress)
■
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time.
Zoom Function
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.
1. Supported Formats
1
2
Press the ZOOM button.
This product only supports the following media formats. If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
■
Each time you press the button, your selection will toggle between <ZOOM X2> and
<ZOOM OFF>.
Supported Video Formats
Press the Cursor
,
,
,
button to move to the area you want to enlarge.
Format
AVI
WMV
Supported Versions DivX3.11~DivX5.1, XviD V1/V2/V3/V7
• A DivX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
Supported Audio Formats
Format
Bit Rate
MP3
80~384kbps
WMA
56~128kbps
AC3
128~384kbps
44.1/48khz
DTS
1.5Mbps
44.1khz
Sampling Frequency
44.1khz
Audio Display
•
•
DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.
Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.
When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on
the screen during playback.
Press the AUDIO button.
■
If there are multiple audio tracks on a disc, you can toggle between them.
•
■
Each time you press the button, your selection will toggle between <AUDIO (1/N, 2/N ...)> and
.
2. Caption Function
•
You must have some experience with video extraction and editing in order to use this feature properly.
•
is displayed when there is one supported language in the disc.
•
To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder.
Example. Root Samsung_007CD1.avi
Samsung_007CD1.smi
•
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function
ENG
Displaying Disc Information
DVD
VCD
CD
MP3
JPEG
DivX
Checking the Remaining Time
DVD
VCD
CD
MP3
You can view disc playback information on the TV screen.
Press the REMAIN button.
■
For checking the total and remaining time of a title or chapter being played.
Press the INFO button.
Each time the Remain button is pressed
■
Each time the button is pressed, the display changes as follows:
TITLE ELAPSED ■ TITLE REMAIN ■ CHAPTER ELAPSED ■ CHAPTER REMAIN
DVD-VIDEO
DVD
GROUP ELAPSED ■ GROUP REMAIN ■ TRACK ELAPSED ■ TRACK REMAIN
DVD-AUDIO
The information
Display disappears
from the screen
TRACK ELAPSED ■ TRACK REMAIN ■ TOTAL ELAPSED ■ TOTAL REMAIN
VCD
MP3
CD
TRACK REMAIN ■ TRACK ELAPSED
VCD
CD
Fast Playback
DVD
VCD
CD
MP3
DivX
The information
Display disappears
from the screen
Press the
,
button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
2X ■
4X ■
8X ■
32X ■
PLAY
PLAY
MP3
JPEG
DivX
2X ■
4X ■
8X ■
32X ■
The information
Display disappears
from the screen
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC.
Slow Playback
DVD
VCD
DivX
appears on the TV screen!
If this symbol appears on the TV screen when pressing a button, that operation is not pos-
sible with the disc currently being played.
Press the SLOW button.
■
Each time the button is pressed during playback, the playback speed changes as follows:
Screen Display
1/2 ■ 1/4 ■ 1/8 ■ 1/2 ■ 1/4 ■ 1/8 ■
PLAY
DVD
VCD
DivX
ELAPSED TIME display
STEREO (L/R) display
1/2 ■ 1/4 ■ 1/6 ■
PLAY
PLAY
TITLE display
DVD display
DVD
AUDIO
CHAPTER display
TRACK (FILE) display
1/2 ■ 1/4 ■ 1/8 ■
REPEAT PLAYBACK display
AUDIO LANGUAGE display
DOLBY DIGITAL display
ANGLE display
DVD-AUDIO display
VCD display
CD display
• No sound is heard during slow playback.
• Reverse slow playback does not work with VCD and DivX.
GROUP display
SUBTITLE display
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
Skipping Scenes/Songs
DVD
VCD
MP3
Repeat Playback
DVD
VCD
CD
MP3
JPEG
DivX
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
Press the
,
button.
■
Each time the button is pressed during playback, the previous or next chapter, track or
directory (file) will be played.
Press the REPEAT button.
■
You cannot skip chapters consecutively.
Each time the button is pressed during playback, the repeat playback mode
changes as follows:
REPEAT : CHAPTER ■ REPEAT : TITLE ■ REPEAT : OFF
DVD
DVD-VIDEO
TITLE 01/05 CHAPTER 002/045
TITLE 01/05 CHAPTER 004/045
REPEAT : TRACK ■ REPEAT : GROUP ■ REPEAT : OFF
DVD-AUDIO
REPEAT : TRACK ■ REPEAT : DISC ■ REPEAT : OFF
VCD
MP3
CD
REPEAT : RANDOM ■ REPEAT : TRACK ■ REPEAT : DIR ■
JPEG
DivX
REPEAT : DISC ■ REPEAT : OFF
Repeat Playback Options
CHAPTER : Repeatedly plays the selected chapter.
TITLE : Repeatedly plays the selected title.
GROUP : Repeatedly plays the selected group.
RANDOM : Plays tracks in random order.
TRACK : Repeatedly plays the selected track.
DIR : Repeatedly plays all tracks in the selected folder.
DISC : Repeatedly plays the entire disc.
OFF : Cancels Repeat Playback.
VCD
(A track that has already been played may be played again.)
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on. To use Repeat Playback on a VCD
with PBC, you should set the MENU to OFF in the disc menu. (See page 39.)
■
When watching a VCD with a track longer than 15 minutes, each time
playback will skip back or forward 5 minutes.
is pressed,
To Select a Repeat Playback Mode in the Disc Information Screen
DVD
VCD
CD
MP3
1
2
3
Press the INFO button twice.
Press the Cursor button to move to REPEAT PLAYBACK (
) display.
Press the Cursor button to select the desired Repeat Playback mode.
To select another album and track, repeat Steps 2 and 3 above.
4
Press the ENTER button.
DVD
VCD
CD
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information dis-
play screen.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
A-B Repeat Playback
DVD
VCD
Angle Function
DVD
You can repeatedly play back a designated section of a DVD.
This function allows you to view the same scene in different angles.
1
Press the INFO button twice.
1
2
Press the INFO button.
■
For a VCD, press the INFO button once.
Press the Cursor button to move to ANGLE (
) display.
2
3
Press the Cursor button to move to the REPEAT PLAYBACK (
) display.
3
Press the Cursor
,
or numeric buttons to select the desired angle.
Press the Cursor
,
button to select <A-> and then press the ENTER but-
■
Each time the button is pressed, the angle changes as follows:
ton at the beginning of the desired segment.
1/3
■
When the ENTER button is pressed, the selected position will be stored in memory.
2/3
3/3
4
Press the ENTER button at the end of the desired segment.
■
The specified segment will be played repeatedly.
A - B
REPEAT : A-B
• The Angle function works only with discs on which multiple angles have been recorded.
To return to normal playback, press the Cursor
OFF.
,
button to select
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Zoom (Screen Enlarge) Function
DVD
VCD
DivX
This function allows you to enlarge a particular area of the displayed image.
1
2
Press the ZOOM button.
Press the Cursor
enlarge.
,
,
,
button to move to the area you want to
Step Function
DVD
VCD
DivX
3
Press the ENTER button.
■
Each time the button is pressed, the zoom level changes as follows:
Press the STEP button.
■
The picture moves forward one frame each time the button is pressed during playback.
ZOOM X 1.5 ■ ZOOM X 2 ■ ZOOM X 3 ■ ZOOM OFF
SELECT ZOOM POSITION
• No sound is heard during step motion playback.
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
EZ VIEW Function
Audio Language Selection Function
DVD
DVD
Press the EZ VIEW button.
1
2
Press the INFO button twice.
Each time the button is pressed, the zoom function will switch between On and Off.
Press the Cursor
,
button or numeric buttons to select the desired audio
When a movie is played in Widescreen format, black bars at the top and bottom of the TV
screen can be removed by pressing the EZ VIEW button.
language.
■
Depending on the number of languages on a DVD disc, a different audio language (ENGLISH,
SPANISH, FRENCH, etc.) is selected each time the button is pressed.
EZ VIEW
EZ VIEW OFF
SP 2/3
FR 3/3
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, some of the left and right sides may be cut slightly.
Subtitle Language Selection Function
DVD
1
2
Press the INFO button twice.
Press the Cursor button to move to SUBTITLE ( ) display.
3
Press the Cursor button or numeric buttons to select the desired subtitle.
Bonus Group
DVD-AUDIO
EN 1/3
EN 01/ 03
SP 02/ 03
OFF
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging
for details and the key number.
FR 03/ 03
OFF / 03
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically.
BONUS GROUP
KEY NUMBER :
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on the
remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
DVD-AUDIO
,
During playback, press the
button on the remote control.
■
You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images.
■
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Playback Function (Con’t)
ENG
DVD
VCD
Moving Directly to a Scene/Song
Using the Disc Menu
DVD
VCD
CD
MP3
JPEG
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
VCD
CD
1
2
Press the INFO button.
1
2
In Stop mode, press the MENU button.
■
When playing a VCD (version 2.0), this toggles between <MENU ON> and <MENU OFF>.
Press the Cursor
desired title/track (
Press the Cursor
,
button or numeric buttons to select the
Press the Cursor
button to move to the <DISC MENU> and then
,
) and then press the ENTER button.
press the ENTER button.
3
4
,
button to move to the Chapter (
) display.
■
When you select Disc Menu and it is not supported by the disc, the <This menu is not
supported> message appears on the screen.
Press the Cursor
,
button or numeric buttons to select the
3
4
Press the Cursor
,
,
,
button to select the desired item.
desired chapter and then press the ENTER button.
Press the Cursor button to move to time ( ) display.
Press the ENTER button.
5
6
,
Press the EXIT button to exit the setup screen.
Press the numeric buttons to select the desired time and then press
the ENTER button.
MENU ON/OFF (PBC) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu
01/05
001/040
0:00:37
1/1
screen.
MOVE
ENTER
EXIT
• MENU ON : This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled,
select <MENU OFF> to enable them.
• MENU OFF : This VCD disc is version 1.1. The disc is played back in the same way as with
a music CD.
MP3
JPEG
Press the numeric buttons.
■
The selected file will be played.
• The disc menu display may be different depending on the disc.
■
When playing an MP3 or JPEG disc, you cannot use the Cursor
button to move to a fold-
button.
,
,
er. To move a folder, press STOP( ) and then press the Cursor
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to the <Title Menu>.
,
• You can press the
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.
button on the remote control to move directly to the desired
Press the ENTER button.
■
The title menu appears.
Press the EXIT button to exit the setup screen.
• The Title menu display may be different depending on the disc.
MOVE
ENTER
EXIT
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Media Files using the USB Host Feature
ENG
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
1
Connect the USB device to the USB port on the side of the unit.
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
2
3
Press the FUNCTION button on the DVD Player or the USB button on the
6. If you use a USB extension cable, the USB device might not be recognized.
remote control to select the USB mode.
■
<USB> appears on the display screen and then disappears.
Supported Formats
■
The USB MENU screen appears on the TV screen and the saved file is played.
File
extension
Sampling
Frequency
File name
Bit rate
Version
Pixel
To stop playback, press the STOP ( ) button.
x
Still Picture
Music
JPG
MP3
WMA
VCD
WMV
DivX
JPG .JPEG
.MP3
–
–
640 480
–
Safe USB Removal
80~384kbps
56~128kbps
1.5Mbps
4Mbps
–
V8
–
–
44.1kHz
44.1kHz
44.1KHz
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
.WMA
MPG.MPEG .DAT
.WMV
VCD1.1,VCD2.0
V1,V2,V3,V7
DivX3.11~DivX5.1,XviD
320x480
Movie
720x480 44.1KHz~48KHz
800x600 44.1KHz~48KHz
(1) Press the STOP ( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
.AVI,.ASF
4Mbps
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
Skip Forward/Back
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
During playback, press the
button.
When there is more than one file and you press the
When there is more than one file and you press the
• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.
■
button, the next file is selected.
■
button, the previous file is selected.
• The USB HOST function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
• Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices.
For information on the supported devices, see page 66.
Fast Playback
To play back the disc at a faster speed, press the
button during playback.
■
Each time you press either button, the playback speed will change as follows:
2x ■ 4x ■ 8x ■ 32x ■ Normal.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
ENG
Setting the Language
Setting TV Screen type
OSD(On-Screen Display) language is set to English by default.
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
1
2
3
4
In Stop mode, press the MENU button.
Press the Cursor button to move to <Setup> and then press the ENTER button.
Select <LANGUAGE> and then press the ENTER button.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Setup> and then press the ENTER button.
Press the Cursor button to move to <TV DISPLAY> and then press the
ENTER button.
Press the Cursor
,
button to select <OSD LANGUAGE> and then press
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
the ENTER button.
4
Press the Cursor
,
button to select the desired item and then press the
ENTER button.
5
Press the Cursor
,
button to select the desired language and then press
Once the setup is complete, you will be taken to the previous screen.
the ENTER button.
Once the setup is complete, the OSD will be English if English has been selected as language.
Press the RETURN button to return to the previous level.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect Ratio (Screen Size)
• OSD LANGUAGE : Selecting the OSD Language
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is
called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
• AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
• DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
For a standard TV, select either <4:3PS> or <4:3LB> option according to personal preference. Select <WIDE/HDTV> if you have a
widescreen TV.
If the language you selected is not recorded on the disc, the menu language will not change even
if you set it to your desired language.
4:3PS (4:3 Pan&Scan)
Select this to play a 16:9 picture in the pan & scan mode on a conventional TV.
MOVE
ENTER
RETURN
EXIT
■
You can see the central portion of the screen only (with the sides of the 16:9 picture cut off).
• OTHER : To select another language, select OTHER and enter the language code of your country.
(See page 65 for language codes) AUDIO, SUBTITLE and DISC MENU language can be
selected.
4:3LB (4:3 Letterbox)
Select this to play a 16:9 picture in the letter box mode on a conventional TV.
■
Black bars will appear at the top and bottom of the screen.
MOVE
SELECT
RETURN
EXIT
WIDE/HDTV
Select this to view a 16:9 picture in the full-screen mode on your widescreen TV.
■
You can enjoy the widescreen aspect.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on the software,
the type of TV, and the TV aspect ratio setting.
• In HDMI operation, the screen is automatically converted to Wide mode.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
ENG
Setting Parental Controls (Rating Level)
Setting the Wallpaper
DVD
VCD
JPEG
Use this to restrict playback of adult or violent DVDs you do not want children to view.
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
1
2
3
4
In Stop mode, press the MENU button.
1
2
During playback, press the PLAY/PAUSE button when an image you like appears.
Press the Cursor
Press the Cursor
button to move to <Setup> and then press the ENTER button.
button to move to <PARENTAL> and then press the ENTER button.
Press the LOGO button.
<COPY LOGO DATA> will be displayed on the TV screen.
3
The power will turn off and then back on.
Press the Cursor
,
button to select the desired rating level and then press
MOVE
ENTER
RETURN
EXIT
The selected wallpaper will be displayed.
You can select up to 3 wallpaper settings.
the ENTER button.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
COPY LOGO DATA
The higher the level, the closer the content is to violent or adult material.
5
Enter the password and then press the ENTER button.
• This function will not work when the HDMI output is 720p or 1080i.
The password is set to "7890" by default.
Once the setup is complete, you will be taken to the previous screen.
MOVE
SELECT
RETURN
EXIT
Press the RETURN button to return to the previous level.
To Select One of the 3 Wallpaper Settings you've made
Press the EXIT button to exit the setup screen.
1
2
3
4
In Stop mode, press the MENU button.
• This function works only if a DVD disc contains the rating level information.
Press the Cursor
Press the Cursor
Press the Cursor
button to move to <Setup> and then press the ENTER button.
button to move to <LOGO> and then press the ENTER button.
Setting the Password
,
button select the desired <USER>, and then
MOVE
ENTER
RETURN
EXIT
press the ENTER button
.
You can set the password for the Parental (rating level) setting.
This selects one of the 3 wallpaper screens
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Setup> and then press the ENTER button.
5
Press the EXIT button to exit the setup screen.
• ORIGINAL : Select this to set the Samsung Logo image as your wallpaper.
• USER : Select this to set the desired image as your wallpaper.
Press the Cursor button to move to <PASSWORD> and then press the
ENTER button.
MOVE
SELECT
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
4
5
Press the ENTER button.
Enter the password and then press the ENTER button.
Press the RETURN button to return to the previous level.
Enter the old password, a new password, and confirm new password.
Press the EXIT button to exit the setup screen.
The setting is complete.
• The password is set to "7890" by default.
MOVE
SELECT
RETURN
EXIT
If you have forgotten the rating level password, do the following
• While the player is in
(No Disc) mode, hold the DVD Player's STOP ( ) button for longer than 5 seconds. “INITIALIZE” appears on the
display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
ENG
DVD Playback Mode
Setting the Delay Time
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio
signals from the center and rear speakers.
1
2
Press the EJECT button and then press the MENU button.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Setup> and then press the
ENTER button.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <DELAY TIME> and then press the
3
4
Press the Cursor button to move to <DVD TYPE> and then press the
ENTER button.
ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
Press the Cursor
,
button to move to <DVD VIDEO> and then press the
4
5
Press the Cursor
press the ENTER button.
Press the Cursor button to set the Delay time.
,
,
,
button to move to the desired speaker and then
ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
,
When Selecting DVD Play Mode:
You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and
15mSEC.
•
•
DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
DVD AUDIO : set to play the default DVD audio.
MOVE
ENTER
RETURN
EXIT
• DVD Play mode is set to DVD Audio as factory default setting.
Press the RETURN button to return to the previous level.
MOVE
CHANGE
RETURN
EXIT
• Powering off the main unit will automatically switch to the DVD Audio mode.
Press the EXIT button to exit the setup screen.
DivX (R) registration
Setting up the Speaker Delay Time
Please use the Registration code to register this player with the DivX (R) video on demand format.
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by
adding a delay effect to the sound of the Center and Surround Speakers.
Setting the Speaker Mode
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df in the figure,
Ideal CENTER SPEAKER
placement
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.
set the mode as 0ms. Otherwise, change the setting according to the table.
Distance between Df and Dc
Delay Time
0.00 m
0 ms
0.34 m
1 ms
0.68 m 1.02 m 1.36 m 1.70 m
2 ms 3 ms 4 ms 5 ms
1
2
3
4
In Stop mode, press the MENU button.
Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds in the figure, set the mode
as 0ms. Otherwise, change the setting according to the table.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
In the <SPEAKER SETUP>, press the ENTER button again.
Ideal
Distance between Df and Dc
Delay Time
0.00 m
0 ms
1.02 m
3 ms
2.04 m 3.06 m 4.08 m 5.10 m
6 ms 9 ms 12 ms 15 ms
SURROUND
SPEAKER
placement
MOVE
ENTER
RETURN
EXIT
Press the Cursor
,
,
,
button to move to the desired speaker and then
press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL NONE.
It is desirable to place all speakers within this circle.
■
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
For L and R, the mode is set to SMALL.
•
•
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
MOVE
CHANGE
RETURN
EXIT
• With
(Dolby Pro Logic II), the delay time may be different for each mode.
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 55).
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is only adjustable on 5.1 channel discs.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
ENG
Setting the Test Tone
Setting the Audio
Use the Test Tone feature to check the speaker connections.
You can adjust the balance and level for each speaker.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Audio> and then press the ENTER button.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <SOUND EDIT> and then press the
Press the Cursor button to move to <TEST TONE> and then press the
ENTER button.
ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
The test tone will be sent to L
■
C
■
R
■
SR
■
SL
■
SW in order.
4
Press the Cursor
Press the Cursor
,
button to select and adjust the desired item.
button to adjust the settings.
If the ENTER button is pressed again at this time, the test tone will stop.
,
Press the RETURN button to return to the previous level.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Press the EXIT button to exit the setup screen.
MOVE
CHANGE
RETURN
EXIT
STOP
EXIT
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
Alternative method: press the TEST TONE button on the remote.
Press the SOUND EDIT button and then press the Cursor
,
button.
Multi-Channel Pro Logic Mode
Press the TEST TONE button.
■
■
■
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
Use this function to check that each speaker is correctly connected and that there is
no problem.
Start
When HDMI AUDIO is on (audio is produced through TV speakers), the
TEST TONE function is not available.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
SW: Subwoofer
To end the test tone, press the TEST TONE button again.
SL: Rear Speaker (L)
SR: Rear Speaker (R)
Adjusting Front/Rear Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
ENG
Setting the DRC (Dynamic Range Compression)
Setting the HDMI Audio
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
2
3
In Stop mode, press the MENU button.
1
2
3
4
In Stop mode, press the MENU button.
Press the Cursor
Press the Cursor
button to move to <Audio> and then press the ENTER button.
button to move to <DRC> and then press the ENTER button.
button to adjust the DRC.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <HDMI AUDIO> and then press the
Press the Cursor
,
ENTER button.
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
EXIT
When the Cursor
button is pressed, the effect is greater, and when the Cursor
button is
4
Press the Cursor
,
button to select <ON> or <OFF> and then press the
pressed, the effect is smaller.
ENTER button.
Press the RETURN button to return to the previous level.
•
•
ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
CHANGE
RETURN
EXIT
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
Setting the AV SYNC
Press the RETURN button to return to the previous level.
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
Press the EXIT button to exit the setup screen.
1
2
3
In Stop mode, press the MENU button.
Press the Cursor
button to move to <Audio> and then press the ENTER button.
Press the Cursor button to move to <AV-SYNC> and then press the
ENTER button.
MOVE
ENTER
RETURN
EXIT
4
Press the Cursor
,
button to select the AV-SYNC Delay Time and then
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
ENG
Sound Field (DSP)/EQ Function
Dolby Pro Logic II Mode
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing
You can select the desired Dolby Pro Logic II audio mode.
Press the
PL II MODE button.
Press the DSP/EQ button.
Each time the button is pressed, the mode changes as follows.
“DSP” appears on the display panel.
Each time the button is pressed, the selection changes as follows:
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• CINEMA : Adds realism to the movie soundtrack.
• PRO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right speakers.
• MATRIX : You will hear 5.1 channel surround sound.
STEREO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
• When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to
surround sound.
•
•
•
•
•
•
•
POP, JAZZ, ROCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE : Provides the feeling of a movie theater.
CHURCH : Gives the feel of being in a grand church.
PASS : Select this for normal listening.
• The DSP/EQ function is only available in STEREO mode.
Press the
PL II mode button to show STEREO on the display.
• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and DSP/EQ function does not work.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings (Con’t)
Listening to Radio
ENG
Remote Control
Dolby Pro Logic II Effect
1
2
Press the TUNER button to select the FM band.
This function works only in Dolby Pro Logic MUSIC mode.
Tune in to the desired station.
1
2
Press the
Press the
PL II MODE button to select <MUSIC> mode.
Automatic Tuning 1 : When the
button is pressed, a preset broadcast station is select-
PL II EFFECT button to select <P> (PANORAMA), then press the Cursor
ed.
,
buttons to select the desired effect setting.
,
Automatic Tuning 2 : Press and hold the
broadcasting stations.
button to automatically search for active
You can select either 0 or 1.
This mode extends the front stereo image to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
,
Manual Tuning : Briefly press the
button to increase or decrease the frequency incrementally.
Main Unit
1
2
Press the FUNCTION button to select the FM band.
3
4
Press the
PL II EFFECT button to select <C> (CENTER WIDTH), then
button to select the desired effect setting.
press the Cursor
,
Select a broadcast station.
You can select between 0 and 7.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press the
This sets the width of the center image. The higher the setting, the less sound comes from the
center speaker.
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the
button to automatically search the band.
Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press the
Press the
the Cursor
PL II EFFECT button to select <D> (DIMENSION), then press
button to select the desired setting
button to tune in to a lower or higher frequency.
,
You can select between 0 and 6.
Press the MO/ST button to listen in Mono/Stereo.
Incrementally adjusts the sound field (DSP) from the front or rear.
Each time the button is pressed, the sound switches between
(STEREO) and
(MONO).
In a poor reception area, select (MONO) for a clear, interference-free broadcast.
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and the
(Dolby Pro Logic II) button does not work.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Radio (Con’t)
Convenient Functions
ENG
Presetting Stations
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press the SLEEP button.
Example : Presetting FM 89.10 in the memory
1
2
Press the TUNER button to select the FM band.
Each time the button is pressed, the preset time changes as follows :
,
Press the
button to select <89.10>.
10 ■ 20 ■ 30 ■ 60 ■ 90 ■ 120 ■ 150 ■ OFF.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
3
4
Press the TUNER MEMORY button.
<01> flashes in the display.
To cancel the sleep timer, press the SLEEP button until <OFF> appears on
Press the
button to select preset number.
the display.
You can select between 1 and 15 presets.
Adjusting Display Brightness
5
6
Press the TUNER MEMORY button again.
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the TUNER MEMORY button before “number” disappears from the display.
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
“number” disappears from the display and the station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
trol to select a channel.
button on the remote con-
• This unit does not receive AM broadcasts.
Mute Function
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
<MUTE> appears in the display.
To restore the sound, press the MUTE button again.
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating a TV with the Remote Control
ENG
When operating a TV with the remote control
TV Brand Code List
1
2
3
Press the TV button to set the remote to TV mode.
No.
No.
Brand
Code
Brand
Code
Admiral (M.Wards)
56, 57, 58
MTC
18
1
2
3
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
Press the POWER button to turn on the TV.
A Mark
01, 15
NEC
18, 19, 20, 40, 59, 60
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12,
Nikei
03
While holding down the POWER button, enter the code corresponding
13, 14
Onking
03
to your brand of TV.
AOC
Bell & Howell (M.Wards)
Brocsonic
Candle
01, 18, 40, 48
Onwa
03
4
If there is more than one code listed for your TV in the table, enter one at a time to deter-
mine which code works.
57, 58, 81
Panasonic
Penney
Philco
06, 07, 08, 09, 54, 66, 67, 73, 74
5
59, 60
18
6
Example : For a Samsung TV
While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40.
18
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
7
Cetronic
Citizen
03
Philips
15, 17, 18, 40, 48, 54, 62, 72
8
03, 18, 25
Pioneer
Portland
Proton
63, 66, 80, 91
9
4
If the TV turns off, the setting is complete.
Cinema
97
10
11
12
13
14
15
16
17
18
19
20
15, 18, 59
You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
Classic
03
40
Concerto
Contec
18
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
06, 66, 67
46
17, 48, 56, 60, 61, 75
Coronado
Craig
15
18, 59, 67, 76, 77, 78, 92, 93, 94
03, 05, 61, 82, 83, 84
03, 19
• The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
Croslex
62
40
Crown
03
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60,
• If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Curtis Mates
CXC
59, 61, 63
98
03
Sanyo
Scott
19, 61, 65
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
03, 40, 60, 61
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
Sears
15, 18, 19
Daytron
Dynasty
Emerson
Fisher
40
Sharp
15, 57, 64
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
03
Signature 2000 (M.Wards)
Sony
57, 58
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
50, 51, 52, 53, 55
19, 65
Soundesign
Spectricon
SSS
03, 40
Funai
03
01
Futuretech
General Electric (GE)
Hall Mark
Hitachi
03
18
06, 40, 56, 59, 66, 67, 68
Sylvania
Symphonic
Tatung
18, 40, 48, 54, 59, 60, 62
40
61, 95, 96
15, 18, 50, 59, 69
06
Inkel
45
Techwood
Teknika
18
03, 15, 18, 25
18, 40
JC Penny
JVC
56, 59, 67, 86
70
TMK
KTV
59, 61, 87, 88
Toshiba
19, 57, 63, 71
18
KEC
03, 15, 40
Vidtech
KMC
15
Videch
59, 60, 69
LG (Goldstar)
Luxman
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
Wards
15, 17, 18, 40, 48, 54, 60, 64
18
Yamaha
York
18
40
37
38
LXI (Sears)
Magnavox
Marantz
Matsui
19, 54, 56, 59, 60, 62, 63, 65, 71
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
Yupiteru
Zenith
03
39
40
41
42
43
40, 54
54
58, 79
01
Zonda
Dongyang
03, 54
MGA
18, 40
Mitsubishi/MGA
18, 40, 59, 60, 75
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
ENG
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized
dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
Symptom
Check/Remedy
Is the power cord plugged securely into the outlet?
Turn off the power and then turn it back on.
•
•
Is the TV power on?
•
•
•
•
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
I cannot eject the disc.
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
Check the region number of the DVD.
•
•
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
Playback does not start.
Audio language and subtitles
do not work.
Audio language and subtitles will not work if the disc does not con-
tain them.
•
Make sure that the rating level is correct.
Are you using a deformed disc or a disc with scratches on
the surface?
Wipe the disc clean.
Playback does not start
immediately when the
Play/Pause button is pressed.
•
•
Menu screen does not appear
even when the menu function is
selected.
Are you using a disc that does not contain menus?
•
•
No sound is heard during fast playback, slow playback, and step
motion playback.
Are the speakers connected properly? Is the speaker setup cor-
rectly customized?
•
•
•
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the appro-
priate function.
Sound is not produced.
Aspect ratio cannot be changed.
Is the disc severely damaged?
• The main unit is not working.
(Example: The power goes out
or strange noise is heard.)
Turn off the power and hold the STOP (
for longer than 5 seconds.
)
button on the main unit
•
When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
•
PL II
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• The DVD player is not working
normally.
Sound can be heard only from a
few speakers and not all six.
•
•
While
(NO DISC) message appears on the display of main unit,
•
hold the main unit's STOP ( ) button for longer than 5 seconds.
<INITIALIZE> appears on the display and all settings will return to the
default values.
The password for rating level
has been forgotten.
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
•
•
Press the POWER button.
•
Dolby Digital 5.1 CH Surround
Sound is not produced.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM anten-
na in an area with good reception.
•
•
Can't receive radio broadcast.
Is the remote control being operated within its operation range of
angle and distance?
•
The remote control does not
work.
Are the batteries exhausted?
Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
While listening to TV audio
through the main unit,
no sound is heard.
If the eject button is pressed while listening to TV audio using
the D.IN, AUX functions, the DVD functions are turned on and this
stops the TV audio.
•
•
•
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on Handling and Storing Discs
Language Code List
ENG
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 44).
Code
Language
Code
Language
Code
Language
Code
Language
Handling discs
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1069
1066
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
Afar
Abkhazian
Afrikaans
Amharic
Arabic
1181
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
Frisian
Irish
1334
1345
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
Latvian, Lettish
Malagasy
Maori
1506
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
Slovenian
Samoan
Shona
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get on
the surface.
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Do not stick paper or tape on the disc.
Assamese
Aymara
Azerbaijani
Bashkir
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Malay
Disc Storage
Byelorussian
Bulgarian
Bihari
Maltese
Burmese
Nauru
Keep in a clean
Protection jacket.
Store vertically.
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Bislama
Bengali; Bangla
Tibetan
Nepali
Tegulu
Dutch
Tajik
Indonesian
Icelandic
Italian
Norwegian
Occitan
Thai
Breton
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Catalan
Corsican
Czech
(Afan) Oromo
Oriya
Hebrew
Japanese
Yiddish
Punjabi
Welsh
Polish
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Danish
Javanese
Georgian
Kazakh
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Turkish
Tsonga
Tatar
German
Bhutani
Greek
Greenlandic
Cambodian
Kannada
Korean
Twi
English
Ukrainian
Urdu
Handling and Storing Discs
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Romanian
Russian
Uzbek
When you get fingerprints or dirt on the disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
Kashmiri
Kurdish
Kinyarwanda
Sanskrit
Vietnamese
Volapuk
Wolof
When cleaning, wipe gently from the inside to the outside of the
disc.
•
Kirghiz
Sindhi
Latin
Sangro
Xhosa
Fiji
Lingala
Serbo-Croatian
Singhalese
Slovak
Yoruba
Chinese
Zulu
Faeroese
French
Laothian
Lithuanian
• Condensation may form if warm air comes into contact with cold parts inside
the player. When condensation forms inside the player, the player may not
operate correctly. If this occurs, remove the disc and let the player stand for
1 or 2 hours with the power on.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Host Feature Supported Products
Specifications
ENG
Digital Camera
USB Flash Disc
60W
Power Consumption
5.2Kg
Weight
Product
Company
Type
Product
Cruzer Micro
Company
Type
GENERAL
460 x 315 x 190 mm
+5°C~+35°C
10% ~ 75%
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Finepix-A340
Fuji
Fuji
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Sandisk
Sandisk
Sandisk
Sony
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Fuji
USB 2.0 256M
Fuji
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
Fuji
Serotech
A.L tech
LG
10dB
Fuji
60dB
FM TUNER
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
Micro Mini
iFlash
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 128M
0.5%
Distortion
USB 2.0 64M
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115Ω
100W x 2(3Ω)
100W(3Ω)
Composite Video
LG
USB 2.0 64M
RiDATA
USB 2.0 64M
VIDEO OUTPUT
Component Video
MP3 Player
HDMI
Nikon
Product
Company
Type
Nikon
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Nikon
Creative MuVo NX128M
Iriver H320
YH-920
Creative
Iriver
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
Nikon
Nikon
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
100W x 2(3Ω)
100W(3Ω)
Nikon
YP-T7
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
YP-MT6
YP-T6
MP3 Player
AMPLIFIER
MP3 Player
20Hz~20KHz
70dB
U300
YP-53
MP3 Player
X-350
YP-ST5
MP3 Player
C-760
YP-T5
MP3 Player
Channel separation
Input sensitivity
60dB
C-5060
YP-60
MP3 Player
(AUX)400mV
X1
YP-780
MP3 Player
U-mini
YP-35
MP3 Player
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
YP-55
MP3 Player
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
MP3 Player
Cowon
MP3 Player
Cowon
HDD MP3 Player
256MB MP3 Player
MP3 Player
Sharp
Optio-S50
Iriver
Optio 33LF
Optio MX
YP-T5 VB
YP-53
Samsung
Samsung
MP3 Player
256MB MP3 Player
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
USB External HDD
Nikon
Nikon
Product
Company
Type
Panasonic
Minolta
Olympus
MOMOBAY UX-2
Dvico
USB 2.0
Dimage Xt
AZ-1
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Specifications (Con’t)
Region
Country
Customer Care Center
Web Site
HT-X250
5.1ch speaker system
Speaker system
Front/Center/Rear speaker Subwoofer speaker
Impedance
3Ω (DCR 3.4Ω)
150Hz~20kHz
86dB/W/M
100W
3Ω (DCR 3.4Ω)
40Hz~200Hz
86dB/W/M
100W
Frequency range
Output sound pressure level
Rated input
SPEAKER
Maximum input
200W
200W
Front/Rear
91 x 276 x 160 mm
Dimensions (W x H x D)
Weights
160 x 388 x 396 mm
6.8Kg
Center
Front/Rear
Center
364 x 78 x 173 mm
1.2Kg
1Kg
HT-TX250
5.1ch speaker system
Front/Center/Rear speaker Subwoofer speaker
Speaker system
Impedance
3Ω (DCR 3.4Ω)
150Hz~20kHz
86dB/W/M
100W
3Ω (DCR 3.4Ω)
40Hz~200Hz
86dB/W/M
100W
Frequency range
Output sound pressure level
Rated input
SPEAKER
Maximum input
200W
200W
Front/Rear
89 x 1200 x 146 mm
176 x 388.8 x 396.3 mm
6.6Kg
Dimensions (W x H x D)
Weights
Center
Front/Rear
Center
365 x 83 x 173 mm
5.4Kg
1.4Kg
Download from Www.Somanuals.com. All Manuals Search And Download.
|