1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 3
DIGITAL HOME
THEATER S YS TEM
HT-DS610
Instruction Manual
COMPACT
DIGITAL AUDIO
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 5
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Do not expose the unit to direct sunlight or other heat
sources.
Voltage peaks due to lightning could damage the unit.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess
The battery used with this product contain chemicals that
are harmful to the environment.
heat(e.g.fireplace) or equipment creating strong magnetic or electric
fields (i.e.speakers...). Disconnect the power cable from the AC supply if
the player malfunctions. Your player is not intended for industrial use.
Do not dispose of batteries in the general household trash.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 6
Safety Instructions
READ INSTRUCTIONS
CLEANING
All the safety and operating instructions should be
read before the appliance is operated.
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near water-
forexample, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been
followed.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from
battery power, or other sources, refer
to the operating instructions.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 7
POWER LINES
REPLACEMENT PARTS
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
ANTENNA
LEAD IN WIRE
POLARIZATION
GROUND
CLAMP
This video product is equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other.) This plug will fit into the power
outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SAFETY CHECK
OUTDOOR ANTENNA GROUNDING
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
If an outside antenna is connected to the
•
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the
following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
In the U.S.A section 810 of the National
•
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
•
HEAT
Refer all servicing to qualified service personnel.
•
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 8
Features
Multi-Disc Playback & AM/FM Tuner
The HT-DS610 combines the convenience of multi-disc playback capability, including
DVD-VIDEO, DVD-AUDIO, CD, MP3-CD, WMA-CD, CD-R/RW, and DVD-R/RW, with
a sophisticated AM/FM tuner, all in a single player.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound
quality in terms of dynamic range, low-level resolution and high-frequency detail.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology
that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater Systems Inc. It
delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-DS610 automatically brightens and darkens the brightness of the TV screen
after 2 minutes in the stop mode.
The HT-DS610 automatically switches itself into the power saving mode after 20
minutes in the screen saver mode.
Power Saving Function
The HT-DS610 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The HT-DS610 allows you to select your favorite image during JPEG, DVD playback
and set it as your background wallpaper.
Convenient AV Device Control Via Anynet
You can conveniently control the DVD Home Theater System and other Samsung AV
devices from your Samsung TV with the remote control via Anynet.
P.SCAN (progressive Scan) Function
Unlike regular interlace Scan ,in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines),Progressive Scan uses one field of
information (all lines displayed in one pass ) to create a clear and detailed picture without visible
scan lines.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 9
Contents
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions.........................................................................................................................................................................2
Safety Instructions ..............................................................................................................................................................3
Features..............................................................................................................................................................................5
Notes on Discs....................................................................................................................................................................7
Description..........................................................................................................................................................................9
CONNECTIONS
Connecting the Speakers....................................................................................................................................................13
Connecting the Video Out to TV .........................................................................................................................................15
P.SCAN(Progressive Scan) Function .................................................................................................................................16
Connecting External Components ......................................................................................................................................17
How to Connect to Anynet ..................................................................................................................................................19
Connecting the FM and AM Antennas................................................................................................................................20
Before Using Your DVD Player...........................................................................................................................................21
OPERATION
Disc Playback .....................................................................................................................................................................23
Selecting a Disc in the Disc changer ..................................................................................................................................25
MP3-CD Playback...............................................................................................................................................................26
JPEG File Playback ............................................................................................................................................................27
Displaying Disc Information ................................................................................................................................................29
Checking the Remaining Time............................................................................................................................................30
Fast/Slow Playback.............................................................................................................................................................31
Skipping Scenes/Songs......................................................................................................................................................32
Repeat Playback.................................................................................................................................................................33
A-B Repeat Playback..........................................................................................................................................................35
Angle Function....................................................................................................................................................................36
Zoom Function....................................................................................................................................................................37
Bonus Group / Navigating Pages........................................................................................................................................38
Selecting Audio/Subtitle Language.....................................................................................................................................39
Moving Directly to a Scene/Song........................................................................................................................................40
Using Disc Menu.................................................................................................................................................................41
Using the Title Menu...........................................................................................................................................................42
SETUP
Setting the Language..........................................................................................................................................................43
Setting TV Screen type.......................................................................................................................................................45
Setting Parental Controls (Rating Level).............................................................................................................................47
Setting the Password..........................................................................................................................................................49
Setting the Wallpaper..........................................................................................................................................................51
DVD Playback Mode...........................................................................................................................................................53
AV SYNC Steup..................................................................................................................................................................54
Setting the Speaker Mode ..................................................................................................................................................55
Setting the Test Tone..........................................................................................................................................................56
Setting the Delay Time........................................................................................................................................................57
Setting the Audio Quality ....................................................................................................................................................59
Setting the DRC (Dynamic Range Compression)...............................................................................................................61
Sound Field (DSP)/EQ Function.........................................................................................................................................62
Dolby Pro Logic II Mode......................................................................................................................................................63
Dolby Pro Logic II Effect .....................................................................................................................................................64
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................65
Presetting Stations..............................................................................................................................................................66
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................67
Operating a TV with the Remote Control............................................................................................................................69
Before Calling for Service ...................................................................................................................................................71
Cautions on Handling and Storing Discs ............................................................................................................................73
Specifications......................................................................................................................................................................74
Notes on Terminology.........................................................................................................................................................75
Warranty .............................................................................................................................................................................76
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 10
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
V I D E O
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
~
1
6
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Mark (Logo)
Recorded Signals
Audio + Video
Disc Size
Max. Playing Time
Disc Type
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
DVD-AUDIO
DVD-VIDEO
3 1/2"
5"
74 min.
20 min.
COMPACT
AUDIO-CD
Audio
DIGITAL AUDIO
3 1/2"
DIGITAL
SOUND
STEREO
NTSC
Dolby Digital
disc
DTS disc
Digital Audio
disc
Stereo disc
NTSC video format
NTSC is used in all of North
America, the Philippines,
South Korea and Japan.
MP3 disc
Do not use the following types of disc!
LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
•
•
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 11
Copy Protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD
•
player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-
protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
•
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Disc Recording Format
CD-R Discs
Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs
may not be playable.
•
Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
•
•
•
CD-R MP3 Discs
Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Use discs recorded with a compression/decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions can be played.
Only a consecutively written Multi session disc can be played. If there is a blank segment in the Multi session disc,
the disc can be played only up to the blank segment.
•
•
•
•
•
If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
•
•
If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
•
•
CD-R JPEG Discs
Only files with the ".jpeg" and ".JPEG" extensions can be played.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
Only a consecutively written multi session disc can be played. If there is a blank segment in the multi session disc, the
disc can be played only up to the blank segment.
•
•
•
•
•
A maximum of 9,999 images can be stored on a single CD.
When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
•
•
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 12
Description
—Front Panel—
Headphone Jack
Volume control
Direct Play button
Open/Close button
Standby indicator
Disc Tray
DIRECT PLAY
3
1
2
4
5
Disc Change
button
Remote Control Sensor
Function button
Tuning Down & Skip ( ) buttons
External Digital in Optical 2
Input Connector
Power (
) button
Tuning Up & Skip (
) buttons
Stop ( ) button
Tuner Mode
Play/Pause ( ) button
PRO LOGIC II indicator
LINEAR PCM indicator
GROUP indicator
CHAPTER indicator
TRACK indicator
PROGRAM indicator
REPEAT indicator
DISC A↔ B indicator
DTS Disc
indicator
TITLE
indicator
TUNER indicator
DISC(1~5)
indicator
System Status Display
P.SCAN indicator
SPEAKER indicator
DSP indicator
DVD AUDIO indicator
DOLBY DIGITAL indicator
RADIO FREQUENCY
indicator
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 13
External Digital in Optical 1 Input
Connector
Use this to connect external equipment
capable of digital output.
—Rear Panel—
5.1 Channel Speaker
Output Terminals
Component Video
Input Connectors
AM Antenna
Connector
External Audio
Input Connectors
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
FM Antenna
Connector
ANYNET
OUTPUT/INPUT
Connector
COMPONENT VIDEO
OUTPUT/INPUT jacks
Connect a TV with component
video inputs to these jacks.
S-Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEO IN), connect it to the
player's S-Video output jack.
Accessories
Remote Control
(AH59-01329A)
Audio Cable
(AH39-40001U)
Video Cable
(AH39-40001V)
AM Antenna
(AH42-20001P)
FM Antenna
(AH42-00004A)
Anynet Cable
(AH39-40001Z)
Speaker Cables
(AH81-01451G)
User's Manual
(AH68-01491R)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 14
Description
—Remote Control—
TV indicator
TV DVD RECEIVER
MODE
TV, DVD POWER button
DVD RECEIVER indicator
MODE button
TV/VIDEO, DIMMER button
OPEN/CLOSE
TV/VIDEO
DIMMER
OPEN/CLOSE button
DVD button
AUX button
DVD
EZ VIEW
STEP
TUNER
BAND
AUX
TUNER BAND button
SLOW
DISC SKIP
REPEAT
MO/ST
DISC SKIP button
SLOW, MO/ST button
REPEAT button
EZ VIEW button
DSP/EQ
STEP button
DSP/EQ button
Play/Pause button
Stop button
VOLUME
TUNING/CH
PL II
MODE
PL II
EFFECT
Tuning Preset/CD Skip button
PL II MODE button
VOLUME button
PL II EFFECT button
TUNING/CH button
MENU button
INFO button
MUTE button
RETURN button
ENTER
Direction/Enter button
TEST TONE
TEST TONE button
SOUND EDIT
Number(0~9) buttons
SOUND EDIT button
TUNER
MEMORY
P.SCAN
TUNER MEMORY, P.SCAN button
CANCEL
ZOOM
SLEEP
SLEEP button
ZOOM button
REMAIN
LOGO SLIDE MODE DIGEST
LOGO COPY button
CANCEL button
REMAIN button
DIGEST button
SLIDE MODE button
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 15
Insert Remote Batteries
Remove the battery
cover on the back of
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
1
2
3
Follow these precautions to avoid leaking or cracking cells:
Caution
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Use the correct type of batteries.Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
•
•
•
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
To open the remote control cover, push the
top of the cover, then slide downward.
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 16
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
SW
L
R
LS
RS
Position of the DVD Player
Selecting the Listening Position
Place it on a stand or cabinet shelf, or under
the TV stand.
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
•
L
R
Front Speakers
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
•
•
•
LS RS
Rear Speakers
Place these speakers behind your listening position.
If there isn't enough room, place these speakers to face each other.
Place them about 60 to 90cm (2 to 3feet) above your ear, facing
•
•
•
slightly downward.
Unlike the front and center speakers, the rear speakers are used
to handle mainly sound effects and sound will not come from
them all the time.
*
C
Center Speaker
It is best to install it at the same height as the front
speakers.
You can also install it directly over or under the TV.
•
SW
Subwoofer
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
•
Usually, it is placed by a corner near the front speakers.
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 17
Front Speaker (L)
Rear Speaker (L)
Center Speaker
Blue
White
Green
Purple
Subwoofer
Red
Gray
Front Speaker (R)
Rear Speaker (R)
Back of the Speakers
Back of the Main Unit
Press down the terminal
tab on the back of the
speaker.
Insert the wire into the
terminal and release the
terminal tab.
Connect the connecting jacks (6)
to the back of the DVD player.
1
2
3
Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
•
Insert the black wire into he black (–)
•
terminal and the gray wire into the
gray (+) terminal.
Make sure the polarities (+ and –) are correct.
•
Make sure the polarities (+ and –)
are correct.
•
Black
Gray
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 18
Connecting the Video Out to TV
TV
Component
Video
Composite
Video
S-Video
Depending on your TV, Component Video input jacks may be marked as DVD Video input.
*
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 16 to select Progressive Scan.
•
Note
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 19
P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
Press STOP button.
1
2
When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
•
Press and hold P.SCAN button on the remote control for over 5 seconds.
Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
•
When you select P.SCAN, "P.SCAN" will appear on the display
•
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
Progressive Scan (FULL FRAME)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
The interlaced scanning method is intended for capturing
a still object.
Note
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
•
•
Depending on the brand and model of your TV, this function may not work.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
"NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
•
•
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 20
Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Set top Box or CD Recorder.
Optical Cable
(not included)
VIDEO OUT
DIGITAL OUT
VIDEO IN
Connect Video Out on the DVD player to Video In on the TV.
1
2
Connect the Digital Input (OPTICAL 1 or 2) to the Digital Output on the external digital component.
Press AUX on the remote control to select ‘DIGITAL 1, 2’.
3
Each time the button is pressed, the selection changes as follows: DIGITAL 1 ↔ DIGITAL 2 ↔ AUX 1 ↔ AUX 2.
•
You can also use the FUNCTION button on the main unit.
•
The mode switches as follows: DVD/CD ↔ DIGITAL 1 ↔ DIGITAL 2 ↔ AUX1 ↔ AUX2 ↔ FM ↔ AM.
Note
When you select Digital 1 or 2, you are selecting the Optical 1 and 2
inputs on the unit respectively.
•
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 21
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
If the external analog
component has only
one Audio Out,
connect either left or
right.
Video Cable
R
L
VIDEO OUT
AUDIO OUT
VIDEO IN
Connect Video Out on the DVD player to Video
In on the TV.
1
2
Note
If you have connected an external digital
component and also an Analog
•
Connect Video In on the DVD player to Video
Out on the external analog component.
component to Video In (1, 2) at the same
time, there will be video from AUX 1 even
when you select DIGITAL 1 or 2 IN.
Connect Audio In on the DVD player to Audio
Out on the external analog component.
3
4
If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
•
•
Be sure to match connector colors.
•
Press AUX on the remote control to select AUX 1
When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
or AUX 2.
Each time the button is pressed, the selection changes as
•
follows: DIGITAL 1 ↔ DIGITAL 2 ↔ AUX 1 ↔ AUX 2.
You can also use the FUNCTION button on the main unit.
•
The mode switches as follows: DVD/CD ↔ DIGITAL 1 ↔
DIGITAL 2 ↔ AUX1 ↔ AUX2 ↔ FM ↔ AM.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 22
How to Connect to Anynet
Using the Anynet function, the DVD Home Theater System can be conveniently controlled from
your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater
System to the input terminal of any Samsung Anynet-enabled device, both can be controlled
from your TV. For detailed operation instructions and connection diagram, refer to the user's
manual of your Anynet-enabled TV.
What is Anynet?
The Anynet function allows you to use your TV's remote control and menu to control all AV devices.
•
However, this function is available only with Samsung Anynet-enabled models.
•
VIDEO IN
Other AV devices
Samsung DVD player
ANYNET
TERMINAL
Samsung VCR
Samsung Set-Top Box
Use this to connect Anynet-enabled
AV devices when necessary.
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
1
2
3
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
This function is available only with Anynet-enabled TVs.
*
Caution
If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
•
Convenient AV Device Control Via Anynet
You can conveniently control the DVD Home Theater System and other AV devices from your
TV with the remote control via Anynet.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 23
Connecting the FM and AM Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
1
2
3
AM Loop Antenna
(supplied)
A
N
T
E
N
N
A
FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
•
If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Cooling Fan
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 24
Before Using Your DVD Player
Your DVD player is capable of playing DVD, CD, MP3 and JPEG discs.Depending on the disc you
are using, these instructions may vary slightly. Read the instructions carefully before using.
Plug the power cord into the
AC power supply.
1
Press TV/VIDEO button to
select VIDEO mode.
4
TV Broadcast System
This device is designed to work with the NTSC video format.
•
For normal playback, the video format a DVD disc is recorded in
•
must coincide with your TV's video format.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 25
Press the MODE button so
that the TV indicator on the
remote control flashes.
Press the POWER button to
2
3 turn on the TV.
TV DVD RECEIVER
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
Press DVD button to select
5
6 DVD/CD mode.
TV DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
•
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs.
•
See page 69 for more information on the operation of the remote control.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 26
Disc Playback
Press OPEN/CLOSE button to open the
1
2
3
4
disc tray.
Load one or more discs.
Place a disc gently into the tray with the disc’s label
facing up.
•
Press DISC SKIP button.
Rotate the carousel tray so you can load the third, fourth, and
fifth discs .
•
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD
CD
Playback starts automatically.
•
To stop playback,
press STOP during playback.
If pressed once, “PRESS PLAY” is displayed and the
•
stop position will be stored in memory. If
To temporarily pause playback,
press PLAY/PAUSE during playback.
PLAY/PAUSE (
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
) button or ENTER button is
To resume playback, press PLAY/PAUSE
•
If pressed twice, “STOP” is displayed, and if
•
button again.
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 27
Disc terminology
Groups and tracks (DVD-AUDIO)
DVD-audios are divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
•
GROUP 1
GROUP 2
TRACK 1
TRACK 2
TRACK 3
TRACK 1
TRACK 2
Titles and chapters (DVD-VIDEO)
DVD-videos are divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
•
TITLE 1
TITLE 2
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Tracks (Video and music CDs)
Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
•
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
.
Note
DVD
In this manual, the instructions marked with "DVD (
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
)" are applicable to
•
Where a particular DVD type is mentioned, it is indicated separately.
Depending on the content of the disc, the initial screen may appear different.
•
24
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 28
Selecting a Disc in the Disc changer
The DVD/CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
All the discs will be played in turn, starting with the one selected.
•
If you wish to play the current disc only, press REPEAT on the front
panel one or more times, until REPEAT : DISC is displayed.
If the disc selected is not loaded, the next disc is played automatically.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 29
MP3-CD Playback
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
Press the
OPEN/CLOSE
In Stop mode, use
to select
the album, and
then press the
ENTER button.
1 button to open the
2
4
disc tray, and then
load the MP3 disc.
The MP3 menu screen will appear
and playback will start.
Depending on the MP3 disc, the
appearance of the menu may be
different.
•
•
To change the album,
use
Press the STOP
button to stop
playback.
to
3 select another album
in Stop mode, and
then press the
ENTER button.
To select another album and track,
repeat Steps 2 and 3 above.
•
Depending on the recording mode, some MP3-CDs may not play.
Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
•
•
Note
26
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 30
JPEG File Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Slide Mode
Place the JPEG disc on the disc tray.
1
2
Press the OPEN/CLOSE button.
PressSLIDEMODEbutton.
3
Each image is shown for 5 seconds before another image is displayed.
Each time the button is pressed, the image makes the transition as follows:
•
•
From top to bottom
From bottom to top
Rectangular shape in the center
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
Cancels the slide mode.
Press
to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
•
27
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 31
Digest Function
You can view 9 JPEG images on the TV screen.
Press DIGEST
button during
playback.
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
1
2
JPEG files will be shown in
9 windows.
•
The selected image is played for 5 seconds before moving to
the next image.
•
To view the previous or next image with 9 windows, press
.
Rotate/Flip Function
Press Cursor , , , buttons during playback.
button: Flip Vertically
button: Rotate 90° Clockwise
button: Rotate 90°
Counterclockwise
Original Image
button: Flip Horizontally
28
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 32
Displaying Disc Information
You can view disc playback information on the TV screen.
Press INFO button.
Each time the button is pressed, the display changes as follows:
•
CD
DVD
MP3 JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
Display disappears
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
•
Display disappears
What is a Group?
A group of tracks contained in a DVD-AUDIO disc.
•
Note
What is a Title?
A movie contained in a DVD-VIDEO disc.
•
•
•
Depending on the disc, the disc
•
•
information display may appear different.
Depending on the disc, you can also
What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD.
Screen Display
DVD display
CHAPTER display
AUDIO LANGUAGE display
SUBTITLE display
STEREO (L/R) display
CD display
TRACK (FILE) display
DOLBY DIGITAL display
MP3 CD display
REPEAT PLAYBACK display
ELAPSED TIME display
TITLE display
ANGLE display
GROUP display
DVD
AUDIO
DVD-AUDIO display
29
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 33
Checking the Remaining Time
Press the Remain button.
For checking the total and remaining time of a title or chapter
being played.
•
Each time the Remain button is pressed
DVD-
VIDEO
DVD-
AUDIO
GROUP ELAPSED
GROUP REMAIN
TRACK ELAPSED
TRACK REMAIN
TITLE ELAPSED
TITLE REMAIN
CHAPTER ELAPSED
CHAPTER REMAIN
CD
MP3
TRACK REMAIN
TRACK ELAPSED
TRACK ELAPSED
TRACK REMAIN
TOTAL ELAPSED
TOTAL REMAIN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 34
Fast/Slow Playback
DVD
CD
MP3
Fast Playback
Press and hold
.
Each time the button is held down during playback,
the playback speed changes as follows:
•
Slow Playback
Press SLOW button.
Each time the button is pressed during playback,
the playback speed changes as follows:
•
DVD
31
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 35
Skipping Scenes/Songs
DVD
MP3
Briefly press
.
Each time the button is pressed briefly during playback, the previous or next chapter,
track, or directory (file) will be played.
•
You cannot skip chapters consecutively.
•
DVD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD
Playing Frame by Frame
Press STEP button.
The picture moves forward one frame each time the
button is pressed during playback.
•
Note
During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
•
No sound is heard during slow playback and step motion playback.
•
32
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 36
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3 JPEG
Press REPEAT button.
Each time the button is pressed during playback, the repeat playback
•
mode changes as follows:
DVD-
VIDEO
DVD-
AUDIO
MP3 JPEG
CD
33
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 37
To Select a Repeat Playback Mode in the Disc Information Screen
Press INFO button twice.
EN
1
DVD
Press Cursor
REPEAT PLAYBACK( ) display.
button to move to
2
3
4
Press Cursor button to select the
desired Repeat Playback mode.
CD
Press ENTER button.
For MP3 and JPEG discs, you cannot select
*
Repeat Play from the information display screen.
Repeat Playback Options
• CHAPTER : Repeatedly plays the selected chapter.
• TITLE : Repeatedly plays the selected title.
• GROUP : Repeatedly plays the selected group.
• RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
• TRACK : Repeatedly plays the selected track.
• FOLDER : Repeatedly plays all tracks in the selected folder.
• DISC : Repeatedly plays the entire disc.
• OFF : Cancels Repeat Playback.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 38
A-B Repeat Playback
DVD
CD
Press Cursor
button to move to
REPEAT PLAYBACK
Press INFO button
twice.
1
2
4
(
) display.
For a CD, press INFO button once.
•
Press Cursor
,
Press ENTER
button at the end
of the segment.
buttons to select ‘A-’ and then
press ENTER button at the
beginning of the segment.
3
When ENTER button is pressed,
the selected position will be stored in
memory.
•
The specified segment will be played
repeatedly.
•
A -
A - B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
,
buttons to select
OFF.
Note
The A-B Repeat function will not work on an MP3 or JPEG disc.
•
35
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 39
Angle Function
This function allows you to view the same scene in different angles.
DVD
Press Cursor
button to move to
Press INFO button.
1
2
ANGLE
display.
(
)
1/3
1/3
Press Cursor
select the desired angle.
,
or numeric buttons to
3
Each time the button is pressed, the angle changes as follows:
•
1/3
2/3
3/3
The Angle function works only with discs on which multiple angles have been recorded.
Note
•
36
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 40
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
DVD
Zoom (Screen Enlarge) Function
Press Cursor , ,
Press ENTER
button.
Press ZOOM
button.
, buttons to
move to the area
you want to enlarge.
1
2
3
Each time the button is pressed, the
zoom level changes as follows:
•
SELECT ZOOM POSITION
DVD
Aspect Ratio
Press EZ VIEW button.
Each time the button is pressed, the zoom function will switch between On
and Off.
When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
•
•
EZ VIEW OFF
Note
This function will not work if the DVD is recorded with multi-camera angle format.
Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
•
•
37
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 41
Bonus Group / Navigating Pages
DVD-
AUDIO
Bonus Group
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
KEY NUMBER :
Note
If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
•
DVD-
Navigating Pages
AUDIO
During playback, press the
remote control.
button on the
You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images depending on how the
disc was manufactured.
•
•
38
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 42
Selecting Audio/Subtitle Language
DVD
Audio Language Selection Function
Press Cursor
,
Press INFO button
twice.
buttons or numeric
buttons to select the
1
2
•
desired audio language.
Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
DVD
Subtitle Language Selection Function
Press Cursor
Press INFO button
button to move to
1twice.
2 SUBTITLE
(
)
display.
Press Cursor
button or numeric
buttons to select
the desired subtitle.
3
EN 1/3
EN 01/ 03
OFF
SP 02/ 03
Depending on the disc,
the Subtitle and Audio
Language functions
may not work.
•
Note
FR 03/ 03
OFF / 03
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 43
Moving Directly to a Scene/Song
DVD
CD
Moving to a Title/Track
Moving to a Chapter
Press Cursor
,
buttons
Press Cursor ,
or numeric buttons to select
the desired title/track and then
press ENTER button.
buttons to move to
Press INFO button.
Chapter (
display.
)
1
2
3
01/05
001/040
0:00:37
1/1
03/05
001/002
0:00:01
1/1
01/05
001/040
0:00:01
1/1
Moving to a Chapter
Moving to a Specific Time
Moving to a Specific Time
Press the numeric
buttons to select the
desired time and then
press ENTER button.
Press Cursor
,
buttons
Press Cursor ,
buttons to move to
time.
or numeric buttons to select
the desired chapter and
then press ENTER button.
4
5
6
01/05
025/040
0:00:01
1/1
01/05
025/040
1:17:30
1/1
01/05
028/040
1:30:00
1/1
MP3 JPEG
Note
Press the numeric
buttons.
You can press
control to move directly to the desired
title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title or
time.
on the remote
•
•
The selected file will be played.
An MP3 or JPEG disc cannot be moved
from the disc information screen.
•
•
When playing an MP3 or JPEG disc, you
•
cannot use
To move a folder, press (Stop) and
then press
,
to move a folder.
,
.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 44
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
Press Cursor
buttons to move to
‘DISC MENU’ and then
press ENTER button.
,
In Stop mode,
press MENU
button.
1
2
When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
•
Press Cursor , ,
, buttons to
select the desired
item.
Press ENTER
button.
3
4
Note
PBC (Playback Control) Function
Press the MENU button while VCD 2.0 version disk is played.
Each time you press the button, "PBC ON" and "PBC OFF" will be repetitively selected in the display.
• PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
• PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:47 PM Page 45
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
Press Cursor ,
button to move to
‘Title Menu’.
In Stop mode,
press MENU
button.
Press ENTER
button.
2
3
1
The title menu appears.
•
Press MENU button to exit the setup screen.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 42
Setting the Language
OSD language is set to English by default.
Press Cursor
In Stop mode,
press MENU
button.
button to move to
‘Setup’ and then
press ENTER button.
1
2
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 43
Press Cursor
,
Press Cursor
button to select the
desired language and then
press ENTER button.
,
Press ENTER
button.
button to select the
desired item and then
press ENTER button.
3
4
5
Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
•
Selecting the
OSD Language
Selecting the
Audio Language
Selecting the
Subtitle Language
Selecting the Disc Menu Language
(recorded on the disc)
(recorded on the disc)
(recorded on the disc)
If the language you selected is
not recorded on the disc, menu
*
language will not change even
if you set it to your desired
language.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 44
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
Press Cursor
In Stop mode,
button to move to
‘Setup’ and then
press ENTER button.
press MENU
button.
1
2
Press Cursor
,
Press Cursor button
to move to ‘TV
DISPLAY’ and then
press ENTER button.
button to select the
desired item and then
press ENTER button.
3
4
Once the setup is complete, you will
be taken to the previous screen.
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 45
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
•You can enjoy the wide screen aspect.
WIDE
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
4:3LB
(4:3 Letterbox)
•Black bars will appear at the top and bottom of the screen.
4:3PS
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
(4:3 Pan&Scan)
•You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Note
46
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 46
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
Press Cursor
button to move to
‘Setup’ and then
In Stop mode,
press MENU
button.
1
2
press ENTER button.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 47
Press Cursor
Press Cursor
,
button
Enter the password
and then press
ENTER button.
button to move to
‘PARENTAL’ and then
press ENTER button.
to select the desired rating
level and then press
ENTER button.
3
4
5
The password is set to "7890" by default.
Once the setup is complete, you will be
taken to the previous screen.
If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
•
•
•
The higher the level, the closer the
content is to violent or adult material.
•
This function works only if a DVD disc contains the rating level information.
Note
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 48
Setting the Password
You can set the password for the Parental (rating level) setting.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press MENU button.
1
2
The password is set to "7890" by default.
Note
•
49
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 49
Press Cursor
button to
Press ENTER
button.
Enter the password
and then press
ENTER button.
move to ‘PASSWORD’
and then press ENTER
button.
3
4
5
Enter the old password, a new
password, and confirm new password.
The setting is complete.
•
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 50
Setting the Wallpaper
JPEG
DVD
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
During playback, press
PLAY/PAUSE button
when the image you
like comes up.
Press LOGO
button.
1
3
2
“COPY LOGO DATA” will be
displayed on the TV screen.
•
COPY LOGO DATA
PAUSE
The power will turn off
and then back on and
the disc tray will open
automatically.
Press OPEN/
CLOSE to close
the disc tray.
4
The selected wallpaper will be
displayed.
You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
•
•
Select this to set the
Select this to set the desired
Samsung Logo image as
your wallpaper.
image as your wallpaper.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 51
To Change the Wallpaper
Press Cursor
button to move to
‘Setup’ and then
Press Cursor
In Stop mode,
press MENU
button.
button to move to
‘LOGO’ and then
press ENTER button.
1
4
2
3
press ENTER button.
Press
to select
Press MENU
button to exit the
setup screen.
the desired ‘USER’,
and then press
ENTER.
5
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 52
DVD Playback Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press the MENU
button while the
disc tray is open.
1
3
2
Press Cursor
button to move to
,
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
4‘DVD VIDEO’ and then
press ENTER button.
Set steps 1 ~ 4 again if you want to
•
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
DVD VIDEO : set to play the DVD video
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
•
audio.
Note
Press RETURN button to return to the previous level.
DVD Play mode is set to DVD
Audio as factory default setting.
•
Press MENU button to exit the setup screen.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 53
AV SYNC Setup
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
Press Cursor
to move to ‘Audio’ and then
press ENTER button.
,
buttons
Press the MENU button.
1
2
Setup menu appears.
'Audio' menu appears.
•
•
Press Cursor
,
buttons
Press Cursor
to move to ‘AV-SYNC’ and
then press ENTER button.
,
buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
3
4
AV-SYNC screen appears.
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
•
•
Press RETURN button to return to the previous level.
54
Press MENU button to exit the setup screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 54
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
Press Cursor
button to move to
‘Audio’ and then
In Stop mode,
press MENU
button.
1
3
2
press ENTER button.
Press Cursor
,
,
In the Speaker
Setup, press the
ENTER button again.
,
buttons to move
to the desired
speaker and then
press ENTER button.
4
For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL ✱ NONE.
For L and R, the mode is set to SMALL.
•
•
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
Depending on PRO LOGIC and STEREO, the speaker mode may vary.
•
55
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 55
Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
Press Cursor
Press Cursor
button
In Stop mode,
press MENU
button.
button to move to
‘Audio’ and then
press ENTER button.
to move to ‘TEST
TONE’ and then press
ENTER button.
1
2
3
The test tone will be sent to L ✱ C ✱
R ✱ RS ✱ LS ✱ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
L: Front Speaker (L)
C: Center Speaker
SW: Subwoofer
When manually testing using the TEST TONE button
R: Front Speaker (R) LS: Rear Speaker (L)
RS: Rear Speaker (R)
Press TEST TONE button.
Multi-Channel Pro Logic Mode
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
•
Use this function to check that each speaker is
correctly connected and that there is no problem.
•
Start
To end the test tone,
press TEST TONE button.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 56
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
Press Cursor button
to move to ‘Audio’ and
In Stop mode,
press MENU
button.
1
2then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
With
(Dolby Pro Logic II), the delay time may be different for each mode.
•
•
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 57
Press Cursor
,
,
Press Cursor ,
to set the Delay
time
Press Cursor
button
,
buttons to move
to move to ‘DELAY
TIME’ and then press
ENTER button.
to the desired
speaker and then
press ENTER button.
3
4
5
You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
•
•
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Ideal CENTER
SPEAKER placement
Distance between Df and Dc
Delay Time
0 inch
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
13.6 inches
27.2 inches
40.8 inches
4.5 feet
5.6 feet
•
Setting REAR (SURROUND) SPEAKERS
Ideal
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
SURROUND
SPEAKER
placement
Distance between Df and Ds
Delay Time
It is desirable to place all speakers within this circle.
0 inch
40.8 inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
58
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 58
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
Press Cursor
In Stop mode,
press MENU
button.
button to move to
‘Audio’ and then press
ENTER button.
1
2
4
Press Cursor
button
Press Cursor
,
,
to move to ‘SOUND
,
buttons to select
3 EDIT’ and then press
the desired item and then
press ENTER button.
ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 59
Method 2
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
Press SOUND
EDIT button and
then press Cursor
Press SOUND
EDIT button and
then press Cursor
1
2
3
, .
, .
,
.
S
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
kHz
MHz
kHz
MHz
Adjusting Rear Speaker Level
Adjusting Subwoofer Speaker Level
Press SOUND
EDIT button and
then press Cursor
Press SOUND
EDIT button and
then press Cursor
, .
4
5
, .
TITLE
CHAP PRGM RDS RT
TUNED
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
kHz
MHz
Note
Adjusting Front/Rear Speaker Balance
You can select between 00 and –06 and OFF.
The volume decreases as you move closer to –6.
•
•
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
•
•
60
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 60
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
In Stop mode, press
MENU button.
1
3
2
Press Cursor button to
move to ‘DRC’ and then
press ENTER button.
Press Cursor
adjust the ‘DRC’.
,
to
4
The Cursor
the Cursor
button is pressed, the greater the effect, and
button is pressed, the smaller the effect.
•
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 61
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
Press DSP/EQ button.
"DSP" appears on the display panel.
Each time the button is pressed, the selection changes as follows:
•
•
• This feature works with CDs, MP3-CDs and 2 channel
DVD-Audio and Dolby Digital discs.
Note
When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
•
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 62
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
Each time the button is pressed, the mode changes as follows.
•
Note
When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
•
PRO LOGIC II
MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
•
CINEMA: Adds realism to the movie soundtrack.
•
PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers,
•
while using just the front leftand right speakers.
MATRIX: You will hear 5.1 channel surround sound.
•
•
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 63
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
Press
PL II EFFECT button
Press
PL II MODE
and then press Cursor
buttons to select the mode.
,
button to select ‘MUSIC’
mode.
1
3
2
You can select either 0 or 1.
•
Press
and then press Cursor
buttons to select the next mode.
PL II EFFECT button
Press
PL II EFFECT button
,
and then press Cursor
buttons to select the mode.
,
4
You can select between 0 and 7.
You can select between 0 and 6.
•
•
Note
When playing a DVD disc encoded with two or more channels, multi-channel mode will be
•
selected automatically and
(Dolby Pro Logic II) button does not work.
PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
•
CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
•
•
64
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 64
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
Tune in to the
Press TUNER/
desired station.
BAND button.
1
2
When
is pressed, a
The selection toggles back
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
Automatic Tuning 1
•
preset broadcast station is
selected.
Press and hold
automatically search for
to
Automatic Tuning 2
active broadcasting stations.
Briefly press
increase or decrease the
frequency incrementally.
to
Manual Tuning
Main Unit
Press the Function
Select a broadcast
station.
button to select the
1
2
desired band (FM, AM).
Press the STOP (
)
Automatic Tuning 1
button to select
PRESET and then press
button to select the preset station.
Press the STOP
to select "MANUAL" and
(
)
button
Automatic Tuning 2
then press and hold
button to
automatically search the band.
Press STOP
MANUAL and then briefly
to tune in to a lower or
(
)
to select
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
In a poor reception area, select MONO for a clear, interference-free broadcast.
•
•
65
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 65
Presetting Stations
Yo u c a n s t o re u p t o :
15 FM stations
• FM
• AM
Frequency Modulation
Medium Wave
•
15 AM stations
•
Example: Presetting FM 89.1 in the memory
Press the
TUNER(BAND)
Press the TUNER
Press
to
1button and select
2 select "89.10".
3
MEMORY button.
the FM band.
Each time the button is pressed,
the band switches between "FM"
and "AM".
Refer to Step 2 on page 65 to
automatically or manually tune in
to a station.
“PRGM” flashes in the display.
•
•
•
To preset another
station, repeat
steps 2 to 5.
Press the TUNER
MEMORY button
again.
Press
to select preset
number.
4
5
6
You can select between 1 and
Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
‘PRGM’ disappears from the display and
the station is stored in memory.
•
•
•
15.
To tune in to a preset station, press
remote control to select a channel.
on the
66
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 66
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
"SLEEP" will be displayed. Each time the button is pressed
•
the preset time changes as follows: 10 ✱ 20 ✱ 30 ✱ 60 ✱
90 ✱ 120 ✱ 150 ✱ OFF.
T
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
The remaining time before the DVD player will shut itself off is displayed.
•
Pressing the button again changes the sleep time from what you have set
•
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 67
Adjusting Display Brightness
Mute Function
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
This is useful when answering a doorbell or
telephone call.
Press DIMMER button.
Press MUTE button.
Each time the button is press, the brightness changes
as follows: ‘SLIGHTLY DARK, DARK, BRIGHT’.
MUTE ON’ appears in the display.
To restore the sound, press the button again to
select ‘MUTE OFF’.
•
•
•
‘
ST
TITLE
CHAP PRGM RDS RT
TUNED
kHz
MHz
Using Headphones
Use headphones (not supplied) for private listening pleasure.
Connect the headphones to the PHONES jack for private listening.
Caution
To prevent hearing damage, do not increase the
•
volume excessively when using headphones.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 68
Operating a TV with the Remote Control
When operating a TV with the remote control
Press the MODE button to make the TV indicator
on the remote control flash.
TV DVD RECEIVER
1
Press POWER button to turn on the TV.
2
Point the remote control toward the TV.
3
While holding down POWER, enter the code
corresponding to your brand of TV.
4
If the code matches the TV's code, the TV will be turned off.
•
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.
5
You can use the TV POWER, VOLUME, CHANNEL, and Numeric
•
buttons (0~9).
Note
The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
•
•
69
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 69
TV Brand Code Number
No.
1
No.
Brand
SAMSUNG
ANAM
Code
Brand
BRANDT
Code
00(Initial Value), 01, 02, 03, 04, 05, 73 30
41
FERGUSON
PIONEER
TELEAVA
FINLUX
2
06~11, 59
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
41
DAEWOO
LG
3
12~18, 20, 21
41, 48, 74
41
4
05, 20, 21, 22, 53
HITACHI
JVC
5
23, 40, 41, 49
05, 42, 47
31
FISHER
6
24, 55
SHARP
AKAI
7
27, 33, 34, 35, 54
31
SONY
YOKO
8
27, 36
05
TOSHIBA
SANYO
PHONOLA
RADIOLA
SCHNEIDER
NEWSAN
CONTINENTAL EDISON
SALORA
9
27, 37, 42, 43, 44, 46
05, 45, 47
05, 45
05
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
27, 30, 31, 32
MITSUBISHI
MATSUSHITA
TELEFUNKEN
RCA
05, 27, 28
09, 26
58
41, 49, 51, 57
49
29, 61
48
PANASONIC
SABA
SELECO
07, 09, 26, 48, 49, 50
48
NOKIA
40, 41, 47, 48, 49
48
PHILIPS
REX
05, 45, 47, 64, 65, 66, 67, 68, 69
48
GRUNDIG
ZENITH
MIVAR
39, 42, 46, 70, 71, 72
46
IMPERIAL
CGE
38
46
MIVAL
52
46
NOBLEX
EMERSON
MAGNAVOX
LOEWE
BANG & OLUFSEN
BRIONVEGA
FORMENTI
METZ
56
47
19
25
47
47
05, 60
47
THOMSON
NORDMENDE
LOEWE OPTA
BLAUPUNKT
SIEMENS
WEGA
40, 41, 49, 62, 63
40, 41, 49
36, 47, 05
39
47
RADIOMARELLI
SINGER
47
47
SINUDYNE
47
39
70
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 70
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
Is the power cord plugged securely into the outlet?
Turn off the power and then turn it back on.
•
•
Disc tray does not open.
Is the region code of the disc "1" or "ALL"?
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
•
•
•
Playback does not start.
Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
Are you using a deformed disc or a disc with scratches on
the surface?
Wipe the disc clean.
•
•
No sound is heard during fast playback, slow playback, and step
motion playback.
•
•
•
•
Sound is not produced.
Are the speakers connected properly? Is the speaker setup
correctly customized?
Is the disc severely damaged?
When listening to a CD or radio, sound is output to the front
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Sound can be heard only
from a few speakers and not
all six.
•
•
Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
•
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
•
•
Dolby Digital 5.1 CH
Surround Sound is not
produced.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 71
Symptom
Check/Remedy
Is the TV power on?
•
•
•
•
•
• Disc is rotating but no
picture is produced.
• Picture quality is poor
and picture is shaking.
Are the video cables connected properly?
Make sure that the disc is not a PAL- disc.
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
Is the remote control being operated within its operation range of
angle and distance?
Are the batteries exhausted?
Have you select the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
•
The remote control does
not work.
•
•
Audio language and
subtitles do not work.
Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
•
Menu screen does not appear even
Are you using a disc that does not contain menus?
•
•
when the menu function is selected.
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Aspect ratio cannot be
changed.
Is the antenna connected properly?
If the antennas input signal is weak, install an external FM antenna
in an area with good reception.
•
•
Can't receive radio
broadcast.
•
The main unit is not working.
Turn off the power and hold the
longer than 5 seconds.
button on the main unit for
•
(Example: The power goes out or
•
sTthraengDeVnoDispe lisayheearrdi.s) not
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
working normally.
While “NO DISC” message appears on the display of main unit, hold
•
the main unit's
button for longer than 5 seconds. “INITIALIZE”
The password for rating
level has been forgotten.
appears on the display and all settings will return to the default values.
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
•
72
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 72
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a clean
Protection jacket.
Store vertically.
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Caution
•
•
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
When cleaning, wipe gently from the inside to the outside of the disc.
•
Note
Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
•
73
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 73
Specifications
G
E
N
E
R
A
L
100W
Power Consumption
Weight
12.8Ibs
17.2 x 3.3 x 16.3 inches
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
41°F ~ 95°F
10% ~ 75%
T
U
N
E
R
10dB
F
M
55dB
0.5%
Distortion
65dB
T
U
N
E
R
Usable Sensitivity
S/N Ratio
A
M
35dB
2%
Distortion
Y:1.0Vp-p(75Ω load), Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Luminance Signal: 1.0Vp-p(75Ω load)
Color Signal: 0.286Vp-p(75Ω load)
100W x 2(4Ω)
VIDEO
INPUT
Component Video
Composite Video
O
V
U
I
T
Component Video
D
P
E
U
O
T
S-VIDEO
A
M
P
L
I
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
100W(4Ω)
100W x 2(4Ω)
100W(4Ω)
20Hz~20KHz
F
I
75dB
S/N Ratio
50dB
E
R
Channel separation
Input sensitivity
(AUX)500mV
5.1ch speaker system
Speaker system
Front/Center/Rear speaker
4Ω x 5
Subwoofer speaker
Impedance
4Ω
S
P
E
A
K
E
R
Frequency range
Output sound pressure level
Rated input
150Hz~20kHz
81dB/W/M
30Hz~150Hz
80dB/W/M
100W
100W
Maximum input
200W
200W
Front/Rear
3.6 x 5.3 x 3.9 inches
7.9 x 4.2 x 3.9 inches
2.0 Ibs
7.1 x 16.1 x 15 inches
Dimensions (W x H x D)
Weights
Center
Front/Rear
15.9 Ibs
Center
2.2 Ibs
74
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 74
Notes on Terminology
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
ANGLE
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
CHAPTER
NUMBER
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
DVD
An acronym for Pulse Code Modulation - another name for digital audio.
PCM
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
REGION NUMBER
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
SUBTITLES
TITLE NUMBER
TRACK NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 75
S AMS UNG DVD P LAYER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
76
Download from Www.Somanuals.com. All Manuals Search And Download.
1p~42p(DS610)-SEA 9/15/04 2:46 PM Page 2
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
AH68-01491R
REV:01
AV SYNC
Download from Www.Somanuals.com. All Manuals Search And Download.
|
RCA CRT Television J26HE840 User Guide
RCA Flat Panel Television RLC2226 User Guide
Samsung All in One Printer All in One Printer User Guide
Samsung DVR SVR 1645 User Guide
Samsung Portable DVD Player DVD L75A User Guide
Samsung Tablet GH88 41012A User Guide
Samsung Vacuum Cleaner VCR8845 User Guide
SATO Printer GT424 User Guide
Sears Dryer Accessories 134176300 User Guide
Senco Staple Gun SNS44XP User Guide