DIGITAL HOME
THEATER S YS TEM
HT-DL105
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
COMPACT
COMPACT
DIGITAL AUDIO
DIGITAL VIDEO
V I D E O
AH68-01147B
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Warnings
1
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby
Digital surround sound and MPEG-2 video compression technology. Now you can
enjoy these realistic effects in the home, as if you were in a movie theater or concert
hall.
B
GB
Precautions
2
Description
5
V I D E O
Remote Control Unit
7
Connecting the Speakers
Connect Video to TV
9
10
11
12
13
14
15
17
18
19
20
21
23
24
24
24
24
25
27
29
30
31
34
35
37
38
39
40
41
43
45
46
47
48
Connecting the FM and AM(MW/LW) Antennas
AUX Connections
Connecting your System to the Power Supply
Before Using the DVD Player
DVD Playback
DVD players and the discs are coded by region. These regional codes must match in
order for the disc to play. If the codes do not match, the disc will not play.
~
1
6
Forward/Reverse Searching
Slow Playback/checking the Remaining Time
Repeat Playback
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Using Disc Menu/Title
Program Playback
Selecting the Audio Language/ Subtitle Language
Various DVD Functions
To enlarge an image
•
Selecting the desired Screen Angle
•
Do not use the following types of disc!
To move directly to a title, chapter, or time
•
MP3 Playack
LD, CDG, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
•
System Setup
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
•
Setting up the Language Features
Controlling a TV with the Remote
Speaker Setup
Creating Realistic Sound Fields
Dolby Pro Logic II decoder
DSP(Digital Signal Processor) Modes
Sleep Functions
Copy Protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
•
Listening to the Radio
Presetting stations
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
•
About RDS broadcasting
Troubleshooting
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Cautions on Hadling and Stroing Discs
Disc Type and Protection
Specification
Reference
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
B
GB
Front Panel
Rear Panel
For using the SCART cable
• If S-Video (Y/C-separation) is equipped for your TV, set Y/C-COMP.
selector of the center unit to Y/C. You can get a better picture quality
by using S-Video (Y/C-separation) setting.
• If S-Video (Y/C-separation) is not equipped for your TV,
set Y/C-COMP. selector to COMP.
Function button
Play/Pause ( ) button
Stop ( ) button
Tuning Down & Skip ( ) buttons
VIDEO OUT SELECT SWITCH
Use the switch to set video out
SCART JACK
Tuning up & Skip ( ) buttons
Power ( ) button
Standby indicator
Connect to a TV with scart input jack.
Volume control
Volume
Standby
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
V
I
D
E
O
AM Antenna
Connector
AM
COMP.
R-REAR-L
WOOFER
CENTER
R-FRONT-L
Function
AUX IN
VIDEO OUT
L
R
Open/Close
FM Antenna
Connector
Phones
6
3
SPEAKERS
6
6
SPEAKERS
Open/Close button
Disc Tray
S-Video Output Connector
If the TV is equipped with an S-Video
input connector (S-VIDEO IN), connect it
to the player's S-Video output jack.
Headphone Jack
5.1 Channel Speaker
Output Terminals
External Audio
Component Input
Connector
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT
connector.
Display
PBC
indicator
TUNER indicator
TITLE indicator STEREO indicator
RADIO
FREQUENCY
indicator
Accessories
PRO LOGIC indicator
DSP
indicator
PROGRAM
indicator
DTS Disc indicator
PRO LOGIC
ST
TUNED
PROGRAM PBC MHZ
DSP
D I G I T A L
TITLE
KHZ
LINEAR PCM
L
C
LFE
S
R
Remote Control
Video/Audio Cable
AM Antenna
FM Antenna
User's Manual
LS
RS
System States Display
SPEAKER indicator
DOLBY DIGITAL
LINEAR PCM indicator
indicator
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Unit
RDS Display
TA
Sound Edit
SPK Mode
Pro Logic
Test Tone
Clear
1
PTY-
2
3
PTY+
B
GB
Sound Edit
SPK Mode
Pro Logic
Test Tone
RDS Selection button
PTY Search
Sound Edit button
SPK Mode button
Pro Logic II button
Test Tone button
4
5
6
DVD POWER button
TV
7
Slow
8
0
9
Setup
Number(0~9) buttons
Slow button
TV Power button
Channel
Volume
DVD
TV Channel Selection button
TV Volume Control button
TV/VIDEO button
DVD button
TUNER button
AUX button
Angle
TV/System
D.R.C
TUNER
Band
Zoom
Angle button
Repeat button
DVD
Title
TUNER
Band
AUX
TV
TV/VIDEO
Repeat
Program
Step
Repeat
AUX
A
B
Menu
Subtitle
Return
Channel
Clear button
Step button
Remain
Title
Audio
MO/ST
Volume
Title button
Menu
Display
Go To
TV/VIDEO
TV System/Zoom button
Menu button
Subtitle button
Play/Pause button
Stop button
Subtitle
DVD/CD/TUNER
Tuning
Audio
MO/ST
Setup button
Audio
Repeat A↔B button
Tuning Preset CD Skip button
/
MO/ST(mono/stereo) button
Down
Up
Tuning Up/Down CD Search button
/
Program button
Remain button
Display
Return
Go To
Display button
Return button
Go To button
Enter
Direction/Enter button
D.R.C button
+
Volume Control buttons
DSP/DPL II Effect button
DSP/DPL II Mode button
Volume
Mute
Speaker output volume control
Insert Remote Batteries
Sleep
Range of Operation of the Remote Control
Mode
Effect
Sleep button
Mute button
The remote control can be used up to
1 Remove the battery cover on
the back of the remote by
pressing down and sliding the
cover in the direction of the
arrow.
approximately 23 feet/7 meters in a straight line.
It can also be operated at a horizontal angle of
up to 30° from the remote control sensor.
To open the remote control
cover, push the top of the
cover, then slide downward.
Insert two 1.5V AAA batteries,
2
paying attention to the correct
polarities (+ and –).
Replace the battery cover.
3
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the
polarity:(+) to (+)and (–)to (–).
•
CAUTION
Use the correct type of batteries.Batteries that look similar
may differ in voltage.
•
Always replace both batteries at the same time.
Do not expose batteries to heat or flame.
7
•
8
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Speakers
Connect Video to TV
Center
speaker
Left front
speaker
Right front
speaker
Subwoofer
• Connect the satellite speakers, center speaker, and
subwoofer to the terminals on the rear panel using
speaker cords supplied.
B
GB
• Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and
black (–) to black (–).
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
AM
COMP.
R-REAR-L
WOOFER
CENTER
R-FRONT-L
AUX IN
VIDEO OUT
L
Left rear
speaker
Right rear
speaker
6
3
SPEAKERS
6
6
SPEAKERS
Press and hold the terminal tab.
1
2
3
1
2
3
Insert the speaker cord.
Release the finger.
TV
SCART
IN
VIDEO
IN
S-VIDEO
IN
Subwoofer
Left rear speaker
Right rear speaker
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of
the system to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not
supplied) from the S-VIDEO OUT jack on the back panel of the system to the S-
VIDEO IN jack on your television.
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
AM
COMP.
R-REAR-L
WOOFER
CENTER
R-FRONT-L
AUX IN
VIDEO OUT
L
R
Scart (Best Quality)
6
3
SPEAKERS
6
6
If you television is equipped with an SCART input, connect an Scart Jack (not
supplied) from the AV OUT jack on the back panel of the system to the SCART IN
jack on your television.
SPEAKERS
If your TV SCART terminal with Y/C-COMP. selector, you can get a better picture quality by
setting Y/C-COMP.selector to Y/C . in this case , you need to set Y/C-COMP. selector of the
center unit to Y/C.
Center speaker
Left front speaker
Right front speaker
• for in-depth information about adjusting the delay time,
see “Speaker Settings” on pages 32.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Connecting the FM and AM MW/LW Antennas
AUX Connections
1
2
3
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
B
GB
TV
To view pictures from the
external input (AUX), first
connect the VIDEO IN
jack (VIDEO) and then
connect the VIDEO OUT
jack.
If FM reception is poor, connect
outdoor FM antenna (not supplied).
VIDEO IN
AM Loop Antenna
(supplied)
ANTNA
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
COMP.
AM
R-FRONT-L
AUX IN
VIDEO OUT
L
COAXIAL
Snap the tabs on the loop into the slots of the
base to assemble the AM loop antenna.
FM Antenna (supplied)
FM
75
R
6
KERS
Audio Cable (Red/White)
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
If the external analog
component has only one
output jack, you may
connect either L or R.
AM
COMP.
R-REAR-L
WOOFER
CENTER
R-FRONT-L
AUX IN
VIDEO OUT
L
R
6
3
SPEAKERS
6
6
SPEAKERS
External Analog
Components
Cooling fan (See “About Cooling Fan” below.)
R
L
Always connect the video and
audio connection cables to the
equivalent colored jack.
•
FM antenna connection
AM(MW/LW) antenna connection
Connect to external equipment with
analog outputs.
Example: Video, TV, LDP, etc.
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal.
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Making Analog Input Selection
•
If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
Remote Control
Main Unit
Press the AUX button and select ANALOG IN.
(About the cooling fan)
Press the Function button and select ANALOG IN.
A cooling fan is mounted on the rear panel of the center unit to
prevent abnormal temperature inside the center unit, thus assuring
normal operation. The cooling fan automatically starts rotating to
supply external cool air to the inside of the center unit when the
internal temperature exceeds the specified limit.
For safety, observe the following carefully.
• Make sure there is good ventilation around the center unit. Poor
ventilation could overheat and damage the canter unit.
• DO NOT block the cooling fan and the ventilation openings or
holes. (If they are blocked by a newspaper or cloth, etc., the heat
may not be able to escape.)
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your System to the Power Supply
Before Using the DVD Player
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
The main lead must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
B
GB
1
2
3
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
Turn on the power
Select a video mode by
pressing the TV/VIDEO
button.
Press the DVD button
to select the DVD input
function.
Prepe- to your DVD player
and TV.
rations
before
use
TV
TV/VIDEO
DVD
AV OUT
ANTENNA
VIDEO
S-VIDEO
Y/C
AM
COMP.
R-REAR-L
WOOFER
CENTER
R-FRONT-L
AUX IN
VIDEO OUT
L
R
The “WAIT” message that appears on the display for about seven to eight seconds when
6
3
SPEAKERS
6
6
•
•
SPEAKERS
turning on the power or selecting a DVD function indicates a stabilization period for
optimizing the condition of your DVD player. While the message is being displayed, other
buttons remain inactive.
When the power is not turned on, press down the Stop ( ) button on the main unit for
over 5 seconds.
The product will be initialized to its optimum state.
Certain operational features such as the Speaker mode, Test tone, Volume, etc.
will not be displayed on the TV screen.
•
•
Listening on headphones
If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 30.
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when using headphones.
TV System
Zoom
TV System Selection
Press the TV System button while in stop mode.
Each time the TV System button is pressed, “NTSC, PAL” are
selected in this order.
•
Volume
Standby
V
I
D
E
O
Different countries use different types of TV broadcast systems, video,
audio and channel systems.
Function
Example : The player cannot playback PAL-encoded DVD with NTSC-TV.
Open/Close
Phones
HEADPHONE jack
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback
B
GB
Display
Using the On-Screen Display
1
Press the Open/Close( ) button
Press the Display button on the remote.
to open the disc tray.
Display
T1/2
C
1/8
00:00:00
The button is located only on the Front
Panel of the player (not on the remote).
•
V
I
D
E
O
TITLE indicator
DVD indicator
TITLE ELAPSED
indicator
CHAPTER indicator
2
Insert a DVD disc.
V
I
D
E
O
Display
DOLBY
ENG
ENG1/3
D
I
G
I
T
A
L
OFF
1/1
V
I
D
E
O
Place a disc gently into the tray with the
disc’s label facing up.
•
ANGLE indicator
REPEAT indicator
SUBTITLE LANGUAGE
indicator
DISC TYPE indicator
AUDIO LANGUAGE
indicator
3
Press the Open/Close( ) button
Display
again to close the disc tray.
The On-Screen Display disappears.
Playback starts automatically.
•
Pausing Playback
Stopping Playback
Mute
What is a Title?
Turning the sound off temporarily?
Press the Play/Pause (
playback.
) button during
Press the Stop ( ) button during playback.
A movie contained in a
DVD disc.
Press the Mute button during playback.
During playback, when the Stop ( )button is pressed,
the position is stored in the memory, and
shown on the display.
•
STOP is
To resume, press the Play/Pause (
button again.
)
•
This operation may be useful when you need
to greet the guests or answer the telephone.
•
What is a Chapter?
When the Play/Pause (
) button or Return button is
Each Title on a DVD
disc is divided into
several smaller sections
called "chapters".
pressed subsequently , playback resumes from the
position at which it was stopped.
Depending on the disc, the initial disc
information screen may look different
from disc to disc.
•
•
If the player is left for more than 3 minutes
in pause mode, it will stop.
If the Stop ( ) button is pressed a second time, the
‘resume play’ memory function is canceled, and
•
When playing a DVD containing MPEG
STOP is shown on the display. When the Play/Pause
format, video may not be reproduced
correctly and you may get picture
distortion.
(
)button is pressed, playback starts from the
beginning.
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Forward/Reverse Searching
Slow Playback/Checking the
Remaining Time
During playback, you can search quickly through a chapter or track for a specific scene
or tune.
Slow
High-Speed Playback
Playing Slowly
Press the
and
button.
Press the Slow button.
Each time the
button is pressed
Each time the
button is pressed
Each time the Slow button is pressed
X 2
X 4
X 8
X 2
SLOW 1/2
SLOW 1/4
PLAY
The slow playback speed changes
and the selections (1/2X, 1/4X, 1/8X,
1/16X and normal play) are repeated.
X 4
X 8
PLAY
PLAY
Remain
Skipping through a Chapter
Checking the Remaining Time
Press the
and
button.
Press the Remain button.
For checking check the total time and the
remaining time of a title or chapter being played.
•
Each time the button is pressed during playback, it moves to the next
or previous chapter and plays it.
•
Each time the Remain button is pressed
SEARCH
SEARCH
TITLE TIME
TRACK TIME
REMAIN TIME : TITLE
CHAPTER TIME
REMAIN TIME : TRACK
DISC TIME
Step
REMAIN TIME : CHAPTER
REMAIN TIME : DISC
No sound is heard during
high-speed playback, slow
playback, and step motion.
Playing Frame by Frame
Press the Step button.
The picture moves forward one frame each time the button is pressed.
•
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Playback
Using Disc Menu/Title
Repeat playback allows you to repeat a chapter, title, or track.
B
GB
Repeat
Menu
Playing Repeatedly
To Select the Disc Menu
You can use the menus for the audio language,
subtitle language, profile, etc. DVD menu contents
differ from disc to disc.
Press the Repeat button.
Each time the Repeat button is pressed
1
2
3
Press the Enter button.
Use the Up/Down (↔↔/ ↔↔) or
Left/Right( ) button to
access the different features.
Press the Menu button during
playback.
/
The Menu Screen appears.
When playing a VCD version
2.0, you can operate it using
PBC On/Off function.
The selected item will play.
•
•
•
Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned on.
To operate this feature, press the MENU button, and then select "PBC OFF".
Title
•
Using the Title Menu
For DVDs containing multiple titles, you can
view the title of each movie.
Depending on the disc, this function may either
not work at all, or may work differently.
Repeat
A↔B Repeat Playback
A
B
Press the Repeat A↔B button at the
beginning (A) of the segment you want to
review.
1
Press the Repeat A↔B button again at
the end (B) of the segment you want to
review.
2
The segment will begin repeating.
•
To return to normal playback
Press the Repeat A↔B button again.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Playback
Use this function with video and music CDs to play the tracks in a particular order.
Program
B
GB
To Program Tracks in a particular order
To Change the Program
1
2
3
1
2
3
Press the Up/Down ( ↔↔/ ↔↔)
button to select the track
number to be changed.
Press the Enter button to
select the title or chapter to be
changed.
Press the Clear button and
then press the Number
buttons.
Press the Program button.
Press the Enter button then
use the Number buttons to
select the desired title.
Press the Enter button, then
use the Number buttons to
select the desired chapter.
You can use also just the
You can use also just the
•
•
The cursor moves to the next
number when the Enter button
is pressed again.
You can use also just the
•
•
Left/Right (
/
/
↔↔
/
↔↔) button. Left/Right
(
/
/
↔↔
/
↔↔ button.
)
Left/Right (
/
) button.
PROGRAM MENU SELECT : ENTER
TITLE CHAPT TITLE CHAPT
PROGRAM MENU SELECT : ENTER
PROGRAM MENU SELECT : ENTER
TITLE CHAPT
TITLE CHAPT
TITLE CHAPT
1
TITLE CHAPT
1
2
6
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
4
5
7
8
8
8
9
9
9
Press the Enter button.
Repeat steps 1-4 above to
change the program.
10
10
10
PREVIOUS
NEXT
PREVIOUS
NEXT
PREVIOUS
NEXT
PLAY :
FINISH : PROGRAM
PLAY :
FINISH : PROGRAM
PLAY :
FINISH : PROGRAM
The cursor moves to the
number below.
•
4
5
To Playback the
Tracks in the
Programmed Order
Press the Enter button.
At this time, you can continue
programming if you want to.
The selected track number is
programming and the cursor
moves to the next number.
When programming more than
•
•
10 tracks, select
and
NEXT
To delete the entire Program
then press the Enter button.
The program selection screen
where you can program up to
10 additional tracks appears.
Press the Play/Pause
(
) button.
Press the Stop ( ) button twice during playback.
•
Press the Stop ( ) button once when in the Stop mode.
•
•
PROGRAM MENU SELECT : ENTER
PROGRAM MENU SELECT : ENTER
TITLE CHAPT
TITLE CHAPT
TITLE CHAPT
TITLE CHAPT
Press the Open/Close ( ) button on the main unit.
The disc tray will open and then close. The program will then
be deleted.
1
2
3
4
5
1
2
6
7
8
9
1
1
1
2
2
2
2
7
3
4
6
7
4
6
3
5
1
1
2
4
5
2
1
2
3
4
5
8
9
10
10
PREVIOUS
NEXT
PREVIOUS
PLAY :
NEXT
FINISH : PROGRAM
PLAY :
FINISH : PROGRAM
Clear
You can program or change
particular tracks for VCD or CD
discs in the same manner.
When you have entered a
wrong number
Press the Clear button.
To Cancel the Programming
Press either the Program button or Stop ( ) button.
When you want to delete a selection during
•
programming, select the track (or chapter, or title) to be
deleted and then press the Clear button.
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio Language/Subtitle Language
Various DVD Functions
TV System
Zoom
Audio
MO/ST
B
GB
To enlarge an image
Selecting the Audio Language
Press the Zoom button.
Press the Audio button.
Images can be enlarged 2x and 4x.
During DVD playback, press the Zoom button
to zoom in 2X/4X/normal, in that order.
•
Only 2X zoom
operation is
possible during
VCD playback.
•
Depending on the number of languages recorded on a DVD disc, a
different audio language (ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
•
•
2
Press
/
/ ↔↔/ ↔ to move the enlarged
•
portion you want to watch.
ENG
ENG1/3
SPA 2/3
OFF
1/1
V
I
D
E
O
FRE
3/3
Angle
Selecting the desired Screen Angle
Press the Angle button.
Depending on the disc, DTS or DIGITAL PRO LOGIC can be selected.
•
This function only works with discs on which multiple angles have been recorded.
During playback, press the Angle button to select the desired angle in 1/3, 2/3, 3/3,
normal, in that order.
•
•
OFF
1/3
2/3
3/3
Subtitle
Selecting the Subtitle Language
Press the Subtitle button.
Depending on the number of languages recorded on a DVD disc, a
different subtitle language (ENGLISH, SPANISH, FRENCH etc.) is
selected each time the button is pressed.
•
To make the subtitles disappear, select "OFF".
•
Go To
To move directly to a title, chapter, or time
ENG 1/1
OFF
1/1
ENG 1/3
SPA 2/3
V
I
D
E
O
1
2
FRE3/3
OFF
Press the Go To button.
Press Number(0~9) button or the
Left/Right ( ) button.
/
Each time the button is pressed, it repeats as shown below.
Each time the buttons are pressed the
desired scene is located and then
played.
Depending on the disc, the Title
function may not work.
•
•
•
If the word
INVALID appears on the TV screen while buttons
•
•
are being operated, that operation is not possible with that
particular disc.
Depending on the disc, the audio or subtitle language function
may not work.
C
1/8
00:00:00
T1/2
00:00:00
T1/2
C
1/8
T1/2
C1/8
00:00:00
V
I
D
E
O
V
I
D
E
O
V
I
D
E
O
:
:
TITLE
CHAPTER
TIME
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
This system has a built-in MP3 decoder.
You can play back MP3 tracks (files)recorded on CD-Rs, CD-RWs, and CD-ROMs.
Operations Using the On-Screen Display
Turn on your TV when playing back an MP3 disc.
Starting Playback
B
GB
When the loaded MP3 disc is recognized, the following
on-screen display appears on the TV screen.
(The contents of this on-screen display vary according to
the disc — the way MP3 tracks were recorded on the
disc.)
It is recommended you turn on your
TV when playing back an MP3 disc.
•
Button
ENTER,
To do
Start playback or go into a directory.
Select a track or directory.
↔↔/ ↔↔
1
CD-R/RW playback compatibility
Press the Open/Close( ) button
to load a disc.
Your DVD player can also play CD-R and
•
CD-RW discs recorded in digital audio format.
When recording your own CD-R or CD-RW
discs, make sure that the recording session is
properly terminated, or they will not be
playable. (Depending on disc properties and
recording quality, some CD-R/RWs may not be
playable.)
2
Press the Play/Pause(
) button.
After detecting the disc, playback starts.
The on-screen bar and the contents
recorded on the MP3 disc will be shown
on the TV if it is turned on.
•
•
CD-RW has a lower reflection rate than CD-R
media and consequently it will take a longer to
read CD-R discs.
CD-RW discs recorded at high speed tend to
be difficult for the DVD player to read. If the
recording speed for the CD-RW disc is not
predetermined, write it at low speed.
•
•
Repeat
Repeating Playback
On an MP3 disc, Repeat A↔B cannot be used.
To stop during playback
What is MP3?
Press the Stop ( ) button.
You can enjoy only repeat play.
Each time you press the button, repeat mode
changes as follows:
•
Press the Repeat button.
The indication corresponding to the selected mode
MP3 File Compatibility
appears on the TV screen.
MP3 is an abbreviation of Motion Picture Experts Group
(or MPEG) Audio Layer 3. MP3 is simply a file format
with a data compression ratio of 1:10 (128 Kbps*).
That means,by using MP3 format, one CD-R or CD-RW
can contain 10 times as much data volume as a regular
CD can.
*Bit rate is the average number of bits that one second
of audio data will consume. The measuring unit used is
Kbps (1000 bits per second).
•This system can only read MP3 files that are recorded in
the format that is compliant with ISO 9660 Level 1 or
Level 2.
•The system can read or play MP3 files only with the
extension code —“.mp3 ”.
•ID3*tags cannot be shown on the display.
*An MP3 file can contain file information called “ID3 Tag”
where its album name, performer, rack title, etc. are
recorded.
REPEAT:RANDOM
:
All tracks recorded on the disc will be played once in random order.
REPEAT:ONE
: Current track will be repeated.
REPEAT:DIR
: Tracks in the current directory will be repeated.
REPEAT:DISC
: All tracks on the disc will be repeated.
REPEAT OFF
: Repeat play is canceled.(Normal play is resumed.)
To obtain better audio quality, choose a higher bit rate.
The most popular bit rate for encoding (recording)is
128 Kbps.
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
You can use the DVD player's Setup function to select the TV screen ratio,
rating limit, or digital output mode.
B
GB
Setup
To Set up the System
TV SCREEN(TV SCREEN RATIO)
Select when you want to watch a 16:9 screen ratio DVD movie on a TV with a 4:3 ratio screen.
You can see the full 16:9 picture, but black bars will appear at the
top and bottom of the screen.
You can only view the central portion of the 16:9 screen.
4:3LB
4:3PS
16:9
1
2
3
LANGUAGES
SYSTEM
TV SCREEN
4:3 LB
OFF
RATING LEVEL
DIGITAL OUTPUT
Press the Left/Right (
/
)
Press the Up/Down ( ↔↔/ ↔↔)
button to select the desired
item.
From the stop mode, press
BITSTREAM
You can view in wide screen but the top and bottom of the picture
will be cut off.
button to select the system.
:
Move
Setup : Exit
the Setup button.
If the movie is recorded in 4:3 ratio, you cannot view the full 16:9 picture with the above
functions.
•
LANGUAGES
SYSTEM
ENGLISH
LANGUAGES
SYSTEM
LANGUAGES
SYSTEM
OSD LANGUAGE
AUDIO
TV SCREEN
TV SCREEN
4:3 LB
OFF
4:3 LB
OFF
RATING LEVEL
DIGITAL OUTPUT
RATING LEVEL
DIGITAL OUTPUT
CHINESE
CHINESE
CHINESE
BITSTREAM
BITSTREAM
SUBTITLE
MENU LANGUAGE
RATING LEVEL
:
Move
Setup
:
Exit
: Move
Setup : Exit
: Move
Setup : Exit
The Rating Level function works in conjunction with DVDs which have been assigned
a rating, to help control the type of DVD that your family watches.
When the rating level
password has been forgotten
4
5
1. Select RATING LEVEL, then press the
Enter button.
LANGUAGES
SYSTEM
TV SCREEN
4:3 LB
OFF
Press the Up/Down ( ↔↔/ ↔↔) button to select the
desired sub-item and then press the Enter
button.
Press the Enter button or Right ( ) button.
RATING LEVEL
DIGITAL OUTPUT
While the player is in the stop
mode, hold the Stop ( ) button
down on the main unit for more than
5 seconds.
"INITIAL" appears on the display and
all default settings will return to
Factory Preset.
BITSTREAM
:
Move
Setup : Exit
2. Use the number(0~9) buttons to input
a 4-digit password.
LANGUAGES
TV SCREEN
SYSTEM
•
4:3 LB
RATING LEVEL
LANGUAGES
SYSTEM
4:3LB
LANGUAGES
SYSTEM
The player’s password is set to "7890" by
default.
DIGITAL OUTPUT
BITSTREAM
•
TV SCREEN
:
Move
Setup : Exit
TV SCREEN
4:3 LB
OFF
Press the Power button.
•
RATING LEVEL
DIGITAL OUTPUT
4:3 PS
RATING LEVEL
16:9
DIGITAL
OUTPUT
BITSTREAM
: Move
Setup : Exit
: Move
Setup : Exit
3.Use the Up/Down (↔↔/ ↔↔) button to select either RATING LEVEL or
NEW PASSWORD, and then press the Enter button.
LANGUAGES
SYSTEM
4:3 LB
TV SCREEN
RATING LEVEL
DIGITAL OUTPUT
There are up to 8 rating levels on a disc.
•
•
:
Move
S
If LEVEL 6 is selected, a disc which contains rating LEVEL 7 and above cannot
Setup
be played.
To End the System Setup
If you select NEW PASSWORD, the screen changes and enables you to enter
the new password.
•
Press the Setup button again.
•
27
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Language Features
Controlling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the code that
corresponds to your brand.
Using the DVD player's Setup function, you can customize the Menu
Language, Subtitle Language, and Disc Menu Language.
Turn on the TV.
B
GB
1
2
3
Setup
3
To set up the language feature
Point the DVD’s remote at the TV.
1
2
TV
While holding the
your brand.
button down, enter the code for
Press the Up/Down ( ↔↔/ ↔↔) button to select
the desired item.
Press the Setup button from the stop mode.
Code
Brand
Code
Brand
SHARP 3
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
SAMSUNG 1
SHARP 2
SONY
16
17
18
19
20
21
22
23
24
25
26
27
28
29
ZENITH
LANGUAGES
SYSTEM
ENGLISH
LANGUAGES
SYSTEM
ENGLISH
LG 3
OSD LANGUAGE
AUDIO
OSD LANGUAGE
AUDIO
MAGNAVOX
SANYO 1
LG 2
DAEWOO 8
SANYO 2
EMERSON
SHARP 3
SAMSUNG 4
MATSUSHITA
NOBLEX
CHINESE
CHINESE
CHINESE
CHINESE
CHINESE
CHI NESE
SUBTITLE
SUBTITL
MENU LANGUAGE
MENU LANGUAGE
:
Move
Setup : Exit
:
Mov
Setup : Exit
RCA
LG 1
(PLAYER MENU LANGUAGE)
(AUDIO LANGUAGE)
OSD LANGUAGE
AUDIO
TOSHIBA
HITACHI
JVC
(SUBTITLE LANGUAGE)
(DISC MENU LANGUAGE)
SUBTITLE
TELEFUNKEN
NEWSAN
LOEWE
MENU LANGUAGE
PANASONIC 1
MITSUBISHI 2
SAMSUNG 2
SAMSUNG 3
If your TV does not switch
from VIDEO mode to TV
mode, press the TV
•
•
3
4
RCA2
POWER
twice.
(
)
button
Press the Up/Down ( ↔↔/ ↔↔) button to select
the desired language and then press the Enter
button.
Press the Enter button or Right ( ) button.
TV
example : For SAMSUNG 1TVs
While holding down the
enter
The remote may not be
able to control every
model TV of the brands
listed.
button,
.
If the TV turns off, setup is complete.
4
LANGUAGES
SYSTEM
ENGLISH
LANGUAGES
SYSTEM
OSD LANGUAGE
AUDIO
OSD LANGUAGE
AUDIO
ENGLISH
CHINESE
D.R.C
CHINESE
CHINESE
ENGLISH
Activating Dynamic Range Compression
SUBTITLE
SUBTITLE
FRENCH
MENU LANGUAGE
MENU LANGUAGE
GERMAN
You can enjoy a powerful sound even at a low volume level by
:
Move
Setup
:
Exit
:
Move
JAPANESE
compressing the dynamic range (difference between the maximum and
minimum sounds).
From the remote control ONLY:
Press the D.R.C button.
D
I
G
I
T
A
L
Setup
To End the Language Features Setup
Each time you press the button,the dynamic range
compression mode alternates between on and off. Select
“D.R.C.ON ” while watching the DVD at night.
(You can obtain a powerful sound at a low volume.)
This function takes effect only when Dolby Digital or DTS
Digital Surround is activated.
•
Press the Setup button again.
•
•
29
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
SPK Mode
Setting up Speaker Mode
and Delay Time
B
To set the delay time
GB
(A)=Df-Dc
Ideal Center Speaker Position
ßWhen 5.1 Channel Surround Sound is played,
Distance of (A) Value(ms)
you can enjoy the best sound if the distance
between you and each speaker is the same. You
can set Delay Time in the Center/Rear Speaker
to customize the sound to the acoustics of your
room.
50
1.3
2.6
3.9
5.3
1
2
100
150
200
Dc
Df
Press the Left/Right (
the desired item.
/
) button to select
Press the SPK Mode button.
(B)=Df-Ds
ß
Setting Center Speaker
Ds
Distance of (B)
Value(ms)
5.3
Each time the button is pressed, a different mode selection is
displayed on the front panel display as shown below.
•
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the
table on the table.
200
400
600
10.6
15.9
Ideal Rear Speaker Position
DIGITAL
Dc: Distance from center speaker to
listening position
Df: Distance from front speakers to
listening position
Ds: Distance from rear speakers to
listening position
ß
Setting Rear Speakers
L
C
R
F
SP SMALL
LFT
Arrange all speakers within a circle
as shown in the figure.
LS
RS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms.
Otherwise, change the setting according to the
table.
S
p
e
a
k
e
r
Front speaker: Small
DIGITAL
DIGITAL
L
C
R
L
C
LFT
R
C
SP SMALL
C
SP NONE
LFT
LS
RS
LS
RS
Center speaker: Small
Center speaker: Not Use
DIGITAL
DIGITAL
Speaker Setting Methods
L
C
R
L
C
LFT
R
R
SP SMALL
R
SP NONE
LFT
LS
RS
LS
RS
M
o
d
e
Rear speaker: Small
Rear speaker: Not Use
Front Speakers
DIGITAL
L
C
LFT
R
SW SP USE
LS
RS
Set the front speakers so that their tweeters (high-range) are
aligned at about ear level and at a horizontal angle of 45° to the
prime listening position.
Subwoofer: Use
DIGITAL
L
C
R
Setting up Delay Time from 00~05ms
Setting up Delay Time from 00~15ms
C
DEL
MS
LFT
LS
RS
Center Speaker
Center Speaker Delay Time
Delay
Time
DIGITAL
Ideally the center speaker should be positioned with its top
surface flush with the front speakers. However, you may place
the speaker either on top or near the bottom of your TV set.
L
C
LFT
R
R
DEL
MS
LS
RS
Rear Speaker Delay Time
Rear Speakers
SMALL: When this setting is selected, low frequencies of below 200 Hz are assigned to
the subwoofer only.
•
Set the rear speakers further back parallel to the walls, at
60 to 90 centimeters (2 to 3 feet) above prime listening
position ear level.
If the space behind the listening position is insufficient
(i.e., too close to the wall), place the rear speakers facing
each other on either side.
USE: Select when using speakers.
•
•
NONE: Select this when no speakers are installed.
Subwoofer Speaker
The display changes depending on the current audio output mode
(DSP, PRO LOGIC, 3-STEREO, STEREO, etc.).
Place the subwoofer at any convenient location within
the vicinity of the listening position.
31
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
Creating Realistic Sound Fields
Sound Edit
You can use the following surround to reproduce a realistic sound field.
• Digital Multichannel Surround —Dolby Digital and DTS Digital Surround
• Dolby Pro Logic II
To set up Speaker Balance
B
GB
1
2
Dolby Digital and DTS Digital Surround
To enjoy surround effectively, all the speakers need to be connected and activated.
Use the Left/Right (
adjustment.
/
) button to make
Press the Sound Edit button.
Dolby Digital
Used to reproduce multichannel sound tracks of the software encoded with Dolby Digital (
).
Each time the button is pressed the selection switches as shown below.
•
Example: 5.1CH Sound Setup
Dolby Digital encoding method (discrete 5.1 channel digital audio format)records and digitally compresses the left front
channel,right front channel,center channel,left rear channel,right rear channel,and LFE channel signals (total 6 channels,but LFE
channel is counted as 0.1 channel.Therefore, LFE is called the 5.1 channel).
In addition,Dolby Digital enables stereo rear sounds,and sets the cutoff frequency of the rear treble at 20 kHz,compared to 7 kHz
for Dolby Pro Logic.These facts result in better sound quality than Dolby Pro Logic.
D
I
G
I
T
A
L
L
C
R
OFF, range of –6 ~ 0
OFF, range of –6 ~ 0
range of –6 ~ –00 ~ +6
range of –6 ~ –00 ~ +6
range of –6 ~ –00 ~ +6
LFE
LS
RS
Front Speakers: L level, R level
D
I
G
I
T
A
L
L
C
R
LFE
LS
RS
When the system detects Dolby Digital signals,the DOLBY DIGITAL indicator lights up on the display.
Rear Speakers: L level, R level
DTS Digital Surround
D
I
G
I
T
T
T
A
L
Used to reproduce multichannel sound tracks of the software encoded with DTS Digital Surround (
).
L
C
R
LFE
LS
RS
Center Speaker
Rear Speakers
DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD,LD,and DVD software.
Compared to Dolby Digital,audio compression rate is relatively low.
This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds.As a result,DTS Digital
Surround features natural,solid and clear sound.
D
I
G
I
A
L
L
C
R
LFE
LS
RS
D
I
G
I
A
L
When the system detects DTS Digital Surround signals, the DTS indicator lights up on the display.
L
C
R
LFE
LS
RS
Dolby Pro Logic II
Subwoofer Speaker
• Dolby Pro-Logic II is a new multi-channel playback format developed by Dolby Laboratories using feedback logic
steering technology and offering improvements over conventional Dolby Pro Logic circuits.
• Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround (
) but also
regular stereo sources into five channels (front left, front right, center, surround left and surround right) to achieve
surround sound.
• Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited, Dolby Pro
Logic II offers a wider band range.
The display changes depending on the current audio output
mode (DSP, PRO LOGIC, 3-STEREO, STEREO, etc.).
In addition, the surround channels were monaural (the surround left and right channels were the same) with previous
Dolby Pro Logic, but with Dolby Pro Logic II they are stereo.
Test Tone
Speaker Setting Methods
Press the Test Tone button.
* Sources recorded in Dolby Surround
These are sources in which three or more channels of surround have been recorded as two channels of signals
using Dolby Surround encoding technology.
Dolby Surround is used for the sound tracks of movies recorded on DVDs, LDs and video cassettes to be played on
stereo VCRs, as well as for the stereo broadcast signals of FM radio, TV, satellite broadcasts and cable TV.
Decoding these signals with Dolby Pro Logic makes it possible to achieve multi-channel surround playback.
The signals can also be played on ordinary stereo equipment, in which case they provide normal stereo sound.
The test signal will be sent to the Left Front, Center, Right Front,
L
C
LFE
R
•
Right Rear, Left Rear and Subwoofer in that order.
Test Tone
LS
RS
To End the Language Features Setup
Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 and other world-wide patents issued
and pending. “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc. ©1996 Digital
Theater Systems, Inc. All rights reserved.
Press the Test Tone button again.
•
While in DSP or PRO LOGIC mode, TEST TONE may
operate differently for VCDs or CDs.
33
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic II decoder
Effect
B
GB
Dolby Pro Logic II
Dolby Pro Logic II Effect Function
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over
conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but
also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
various parameters can be set according to the type of source and the contents, so you can adjust the
sound field with greater precision.
This function works only in the DPL II M (Dolby Pro Logic II Music) Mode.
1
2
Use the Left/Right (
adjustments.
/
) button to make
Press the DSP/DPL II Effect button.
1
Press the Function button to select the desired function.
Each time the DSP/DPL II Effect button is pressed.
•
Select from FM, AM, DVD and AUX.
•
Select “0” or “1”
2
3
Press the Pro Logic II button.
Press the DSP/DPL II Mode button.
The control can
be set in 8 steps
from 0 to 7.
Each time the Pro Logic II button is pressed.
Each time the DSP/DPL II Mode button is pressed.
•
•
PRO LOGIC
PRO LOGIC
The control can
be set in 7 steps
from 0 to 6.
L
R
L
R
PRO LOGIC II : Left, Center, Right,
Subwoofer and
PRO LOGIC
R
L
Surround(Left, Right)
Channels
Panorama Mode
•
•
This mode extends the front stereo image to include the surround speakers for an
PRO LOGIC
L R
L
R
exciting “wraparound” effect with side wall imaging.
Center Width Control
STEREO : Left, Right and Subwoofer Channels
This control adjusts the center image so it may be heard only from the center speaker;
only from the left/right speakers as a phantom image; or from all three front speakers to
varying degrees.
PRO LOGIC
R
L
Dimension Control
•
Pro Logic II Mode
Select one of the modes (“MUSIC”, “CINEMA”, “PRO LOGIC” or “MATRIX”).
This control gradually adjusts the soundfield either towards the front or towards the rear.
The Music mode is recommended when listening to CDs or watching DVDs with mostly
musical content.
•
When playing a DVD encoded in two or more channels, DOLBY PRO LOGIC II mode
cannot be selected.
•
The Cinema mode is best when watching movies.
The Pro Logic mode offers the same surround processing as original Pro Logic and is
best used when the source contents are not of optimum quality.
•
•
The Matrix mode is useful for when the audio is mono.
•
35
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DSP(Digital Signal Processor)
Modes
Sleep Function
DSP modes have been designed to simulate different acoustic environments.
The sound heard in a hall, theater, pavilion, dance club, or live club consists of direct
and indirect sound —early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection.
Indirect sounds are delayed by the distance of the ceiling and walls.
These indirect sounds are an important element of the acoustic surround effect.
B
GB
Sleep
To set up Sleep
Press the Sleep button.
What is the
Sleep function?
Each time the button is pressed the selection
•
Press the DSP/DPLII Mode button.
toggles as follows: SLEEP 10
↔
SLEEP 20
You can set the delay time so that
the unit powers off automatically
after a preset period of time.
↔
SLEEP 30 ↔↔SLEEP 60 ↔↔SLEEP 90
The following DSP modes are provided with this unit:
•
↔↔SLEEP 120 ↔↔SLEEP 150 ↔↔OFF.
HALL : Provides a clear vocal and simulates the feeling of a concert hall.
THEATER : Simulates the feeling of a theater.
To Review Sleep Setting
PAVILION : Simulates the spacious feeling of a pavilion with a high ceiling.
DANCE CLUB : Simulates the sound of a dance club with a throbbing bass beat.
LIVE CLUB : Simulates the feeling of a live music club with a low ceiling.
The remaining time for the selected Sleep time is
displayed.
•
Pressing the button once again changes the Sleep
time from the last setting.
•
These DSP modes can be used to add acoustic surround effects while reproducing
stereo analog or linear PCM digital signals.
•
•
When one of the DSP modes is selected,the DSP indicator lights up on the display.
DSP modes available according to the input signal format
O : Possible, X : Not possible
37
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Radio
Presetting stations
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either
the automatic tuning or manual tuning operation.
Yo u c a n s t o re u p t o :
• FM
Frequency Modulation
Medium Wave
15 FM stations
8 MW stations
7 LW stations
• AM(MW)
• LW
Long Wave
B
GB
Example: Presetting FM 89.1 in the memory
2
1
1
2
3
Remote
Control
Unit
Press the Tuner(Band)
button.
Select a broadcast station.
Use the
and
Select the MANUAL by
pressing the Stop ( ) button
on the main unit.
Press the Tuner(Band) button
button to tune into 89.1
and select the FM band.
The selection toggles back
and forth between "FM" "MW"
and "LW" each time the
Tuner(Band) button is
pressed.
When the
button is pressed, a preset
•
Auto Station 1
Auto Station 2
broadcast station is selected.
The selection toggles back and forth between "
each time the Tuner(Band) button is pressed.
"
•
Hold in the
button. Automatic searching
MHZ
MHZ
begins, and then stops when a station is tuned in.
L
R
L
R
L
R
Press the
button to tune to the chosen
Manual Station
station. The frequency changes incrementally in either
direction each time the corresponding button is pressed.
2
1
4
5
6
Press the Function button to
select the desired band (FM,
MW or LW).
Main
Unit
Press the Program button on
the remote control, FM1 will
flash. If you want to save 89.1
to FM1, press Program again.
If you want to save 89.1 to another
preset location(FM2~FM15), press
Select a broadcast station.
To preset other stations,
follow steps 1~4 again.
or
, then press
Program to save it to that location.
Press the Stop (
mode. Then press the
) button to select the PRESET
button to select a
Auto Station 1
Auto Station 2
PROGRAM
MHZ
PROGRAM
MHZ
station stored in the preset
L
R
L
R
Press the Stop (
) button to select the MANUAL
MHZ
mode on the front panel. Then hold in the
button to make the unit begin automaticall searching for
L
R
broadcast stations.
Manual Station
Press the Stop (
mode front panel. Press the
) button to select the MANUAL
button to tune
To store other Channels
To tune in a preset station
to the desired station. The frequency changes
incrementally in either direction each time the
corresponding button is pressed.
Follow steps 3~5 again.
See the previous page.
Audio
MO/ST
To Listen in Mono/Stereo
Press the MO/ST button. (only FM)
The selection toggles back and forth between “STEREO” and “MONO” each time the
MO/ST button is pressed.
•
In a poor reception areas, select Mono mode for a clear, interference-free broadcast.
•
39
40
Download from Www.Somanuals.com. All Manuals Search And Download.
About RDS broadcasting
PTY-
4
PTY Search
5
PTY+
6
PTY (Program Type) indication and PTY-SEARCH function
Using the RDS (Radio Data System) to receive FM stations
B
GB
RDS allows FM stations to send an additional signal along with their regular program signals.
For example,the stations send their station names,as well as information about what type of program
they broadcast, such as sports or music,etc.
One of the advantages of the RDS service is that you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
When tuned to an FM station which provides the RDS service,the RDS indicator lights up on the display.
To search for a program using the PTY codes
Description on RDS function
•
Display
NEWS
Program Type
Before you start, remomber...
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• News including an announced opinion and
report
The PTY Search is only applicable to preset
stations.
•
• Several matters including a current incident,
documentary, discussion and analysis.
AFFAIRS
INFO
To stop searching any time during the process,
press PTY SEARCH while searching.
•
• Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.
•
There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
•
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress.
SPORT
EDUCATE
DRAMA
• Sports
RDS is not available for MW/LW broadcasts.
RDS may not operate correctly if the station tuned is not transmitting RDS
signal properly or if the signal strength is weak.
•
•
• Education
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
•
• Drama-Radio serial, etc.
• Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
CULTURE
SCIENCE
VARIED
• Natural science and technology
• Others-Speech, amusing program (quiz,
game), interview, comedy and satirical play,
etc.
Press PTY SEARCH while listenning to an
FM station.
What information can RDS signals provide?
You can see the RDS signals the station sends on the display.
RDS Display
1
2
1
POP M
• Pop music
• Rock music
ROCK M
TO show the RDS signals
Press and hold PTY-or PTY+until the PTY
code you want appears on the display
window, while "PTY SELECT"is flashing.
• Light classical music- Classical music and
instrumental and chorus music
LIGHT M
CLASSIC
Press RDS DISPLAY while listening to an FM ststion.
Each time you press the button, the display change to show you the following information:
• Heavy classical music-Orchestra music,
symphony, chamber music and opera
The display gives you the PTY codes described
•
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
• Other music - Jazz, R&B country music
• Weather
to the right.
PS (Program Service) : While searching,"PS"appears and then the station names will be
displayed."NO PS" appears if no signal is sent.
PTY (Rrogram Type) : while searching,"PTY" appears and then the type of the broadcast program will
be displayed. "NO PTY"appears if no signal is sent.
RT(RadioText) : while searching,"RT"appears and then text messages the station sends will be
displayed. "NO RT"appears if no signal is sent.
Frequency : station frequency (non-RDS service)
• Finance
• Children’s programmes
• Social affairs
• Religion
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
3
RELIGION
PHONE IN
TRAVEL
• Phone in
The center unit searches 15 preset FM
•
• Travel
stations,stops when it finds the one you
have selected, and tunes in that station.
• Leisure
LEISURE
JAZZ
• Jazz Music
About characters shown in the display
When the display shows PS,PTY,or RT signals,the following haracters are used.
• Country Music
• National Music
• Oldies Music
• Folk Music
COUNTRY
NATIONAL M
OLDIES
The display window cannot differentiate upper case and lower case lrtters and always uses upper
case letters.
•
FOLK M
The display window cannot show accented letters, “A,” for instance, may stans for accented “A’s” like
“À, Â, Ä, Á, Åand Ã.”
•
• Documentary
DOCUMENT
If searching finishes at once,“PS”,“PTY”,and “RT” will not appear on the display.
41
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Check
B
Problem
Check
GB
Is the TV power turned on?
Are the video cables properly connected?
Is it the player in PAUSE mode?
Is your TV’s video format (NTSC/PAL) set correctly?
Press the NTSC/PAL button once again to change the current selection.
Is there any dirt on the disc, or is the disc damaged?
It may not be possible to play some DVD discs due to poor manufacture.
When a dark scene changes to a bright scene during playback, the
screen may flicker vertically. Some disturbance is normal.
•
•
•
•
Is the disc installed with the label side facing up?
•
•
•
• The disc revolves but no
picture appears.
• Picture shows interference
and quality is poor.
The disc tray does not
open.
Is the power cord plugged securely into the power outlet?
Turn off the power to the unit by pressing the Power (
and turn it back on.
) button
•
•
•
Check the region number of the DVD.
•
•
•
•
DVD discs purchased abroad may not be playable.
This player cannot play CD-ROMs, DVD-ROMs, etc.
Check the rating level of the DVD.
Disc does not play.
• Is the remote control being used within the appropriate distance
and angle of operation for the unit?
• Are there any obstacles between the remote control unit and the
remote control sensor?
Remote control unit does
not operate.
Playback does not start
immediately when the
Check whether the disc has any scratch marks or is deformed?
•
Play/Pause button is pressed.
Are the batteries dead? Is it time to replace the batteries with new ones?
•
No sound is heard during high-speed playback, slow playback,
and step motion playback modes.
•
•
•
Audio or subtitle language
does not operate.
The audio or subtitle language features does not operate with
DVDs that do not include multiple audio or subtitle languages.
•
Are the speakers properly connected? Is the speaker Setup
correctly customized?
No sound is produced.
Is the remote control being used within the appropriate distance
and angle of operation for the unit?
•
Is the disc severely damaged?
The disc may be dirty. Wipe off fingerprints or dirt.
The Menu button is
pressed but the Menu
screen does not appear.
Are the batteries dead?
•
•
Sound can be heard only
from a few speakers and
not all six.
When listening to a CD or radio, sound is output to the front
•
Does tje disc have a Menu?
speakers only (L/R). Select the “PRO LOGIC” option by pressing
the Pro Logic button on the remote control unit to use all six
speakers.
You can play 16:9 wide DVDs in 16:9 WIDE mode or 4:3 LETTER
•
Check whether your DVD disc is 5.1 CH compatible.
•
•
The screen ratio cannot
be changed.
BOX mode or 4:3 PAN-SCAN mode; but 4:3 encoded DVDs only
show in 4:3 ratio. Refer to the DVD disc jacket and then select the
appropriate function.
Was the player moved suddenly from a cold pace to a warm one?
Picture does not appear; sound
is not produced; the disc tray
opens 2-5 seconds later.
When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player after the condensation disappears.)
The desired radio station
cannot be tuned in.
Is the antenna installed properly?
•
•
When the antenna's input signal is weak, install an external FM
antenna in an area with good reception quality.
Sound quality is
irregular.
Are the speaker cables loose?
•
•
Is there any dirt or debris at the end of the speaker connector?
While the player is in the stop mode, hold the Stop ( ) button
down on the main unit for over 5 seconds."INITIAL" appears on the
display and all settings will return to the Factory Preset condition.
The RESET function erases all settings; do not use this
function unless necessary.
•
The system is
Dolby Digital 5.1 Channel
Surround Sound is not
being reproduced.
Does the disc being played show the “Dolby Digital 5.1CH” mark ?
5.1-channel sound is reproduced only if the disc is recorded with
5.1 channel sound.
•
•
malfunctioning (the
system does not work or
no sound).
Is the DVD player connected to the proper speakers?
43
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on Handling and Storing Discs
Disc Type and Protection
Small scratches on the disc may reduce sound and picture quality or cause breaks
in playback. Be especially careful not to scratch discs when handling them.
B
GB
Usable Discs
Handling and Storing Discs
When you get fingerprints or dirt on the
disc, clean it with a mild detergent diluted
in water and wipe with a soft cloth.
Recording
Types
Disc Size
12cm
8cm
Disc Types
Marks
Max. Playing Time
When cleaning, wipe gently from the inside to the
•
Approx. 240 min. (Single-sided)
Approx. 480 min. (Double-sided)
Approx. 80 min. (Single-sided)
Approx. 160 min. (Double-sided)
outside of the disc.
DVD
Audio + Video
V I D E O
COMPACT
12cm
8cm
74 min.
20 min.
74 min.
20 min.
Condensation may form if warm air comes into
contact with cold parts inside the player. When
condensation forms inside the player, the
player may not operate correctly. If this occurs,
remove the disc and let the player stand for 1
or 2 hours with the power on.
VIDEO-CD
AUDIO-CD
Audio + Video
DIGITAL VIDEO
COMPACT
12cm
8cm
Audio
DIGITAL AUDIO
Disc Storage
Do not keep in direct
sunlight
Keep in a cool
ventilated area
Keep in a clean
Protection jacket.
Store vertically.
DTS Disc
Dolby Digital
disc
Digital Audio
disc
Stereo disc
NTSC broadcast
system in USA,
Canada, Japan,
South Korea, etc..
MP3 disc
Do not allow the discs to become contaminated
with dirt.
•
•
Do not load cracked discs or discs that are
scratched.
45
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Reference
120W
G
E
N
E
R
A
L
Power Consumption
Weight
Note on Terminology
B
GB
6.5Kg
370mm x 80mm x 300mm
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
ANGLE
+5°C~+35°C
10%~75%
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
10dB
T
U
N
E
R
CHAPTER
NUMBER
F
M
60dB
0.5%
Distortion
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and high-
density recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
T
U
N
E
R
54dB
Usable Sensitivity
S/N Ratio
DVD
PCM
A
M
40dB
2%
Distortion
An acronym for Pulse Code Modulation - another name for digital audio.
1.0Vp-p(75Ω load)
Composite Video
O
V
I
D
E
O
Compositive Video : 1.0Vp-p(75Ω load)
Luminance signal : 1.0Vp-p(75Ω load)
Color Signal : 0.286Vp-p(75Ω load)
Luminance Signal: 1.0Vp-p(75Ω load)
Color Signal: 0.286Vp-p(75Ω load)
40W x 2(6Ω)
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
U
T
P
U
T
Scart Jack
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
S-VIDEO
REGION NUMBER
SUBTITLES
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
A
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
40W(6Ω)
M
P
L
I
F
I
40W x 2(6Ω)
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
70W(3Ω)
TITLE NUMBER
TRACK NUMBER
20Hz~25KHz
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
75dB
S/N Ratio
E
R
50dB
Channel separation
Input sensitivity
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
(AUX)500mV
VIDEO CD
5.1ch speaker system
This player also supports video CDs with playback control (version 2.0).
Speaker system
Front/Center/Rear speaker
Subwoofer speaker
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as laser discs, DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
Impedance
6Ω x 5
3Ω
S
P
E
A
K
E
R
Frequency range
Output sound pressure level
Rated input
150Hz~18KHz
87dB/W/M
40W
45Hz~250Hz
86dB/W/M
70W
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
DOLBY
DOLBY
disc marking). With better sound quality,
D
I
G
I
T
A
L
Maximum input
80W
140W
dynamic range, and directionality than the traditional Dolby surround technology,
you can enjoy the dynamic realistic sound.
D I G I T A L
Front/Rear 103mm
Center 197mm
Front/Rear 0.73Kg
Center 0.80Kg
x
150mm
x
120mm
Dimensions (W x H x D)
250mm x 403mm x 335mm
6.8Kg
x
103mm
x 120mm
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
sound unavailable from regular stereo sources.
mark. You can enjoy a more realistic, robust
Weights
47
48
Download from Www.Somanuals.com. All Manuals Search And Download.
|