Digital Surround
AV Receiver System
AV-R720
HT-AS720
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
AH68-01989B
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Features
Contents
Digital AV Receiver
This product is a pure digital AV receiver that performs digital signal processing to minimise
signal distortion and loss.
PREPARATION
Safety Warnings ..............................................................................................................2
Precautions......................................................................................................................3
Features ..........................................................................................................................4
Description ......................................................................................................................6
Dolby Pro Logic llx
Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channel out of 2 channel
or multi channel sources.It also provides Music,Movie and Game modes.
CONNECTIONS
Connecting the speakers.................................................................................................10
Connecting external devices ...........................................................................................12
Anynet+ ...........................................................................................................................16
Connecting the FM antennas ..........................................................................................17
DTS 96/24
DTS is a surround format that implements 5.1 channel multi channel sound at 96KHz/24bit.
In addition, it can also reproduce the matrix 6.1 of DTS 96/24 decorder signals.
OPERATION
Before using the AV receiver...........................................................................................18
Selecting digital/analogue input ......................................................................................19
Setting the speaker mode................................................................................................20
Setting the speaker listening distance ...........................................................................22
Setting digital input ..........................................................................................................23
Setting HDMI AUDIO.......................................................................................................24
Setting DRC (Dynamic Range Compression) .................................................................25
Test tone .........................................................................................................................26
Setting speaker level .......................................................................................................28
Dolby Pro Logic llx mode.................................................................................................29
Setting Dolby Pro Logic llx effect ....................................................................................30
Setting NEO:6 mode........................................................................................................31
Setting EX/ES mode........................................................................................................32
Setting Tone Control........................................................................................................33
SFE mode........................................................................................................................34
Stereo mode....................................................................................................................35
DOLBY DIGITAL EX
Adds a surround back channel for more spacious sound compared to regular 5.1 channel
Dolby Digital.
DTS (Digital Theater Systems)
DTS plays back 5.1 channel sound with less compression than Dolby Digital for richer sound.
DTS-ES (Extended Surround)
DTS-ES adds an additional rear center surround channel for 6.1 channel sound.
It is compatible with existing DTS Digital Sound formats.
DTS
Reproduces digital PCM or analogue stereo over 6.1 channel using a high precision
DTS digital matrix.
RADIO OPERATION
Listening to radio ............................................................................................................36
Presetting radio stations .................................................................................................37
About RDS broadcasting.................................................................................................38
SFE (Sound Field Effect) Using 24bit Audio Digital Signal Processing
Provides more realistic surround sound with normal stereo audio sources.
Anynet+ (HDMI-CEC) Function
MISCELLANEOUS
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV
remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable.
(This function is available only in connection with Samsung TV and DVD player supporting
Anynet +(HDMI-CEC).)
Convenient functions ......................................................................................................40
Operating your TV with the remote control......................................................................43
Operating your DVD (VCR) with the remote control........................................................45
Before calling for service .................................................................................................47
Specifications ..................................................................................................................49
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Description
[
]
Rear panel
[
]
Front panel
TONE CONTROL button
Remote control sensor SURROUND button
CD AUDIO INPUT JACKS
HDMI OUTPUT JACK
VCR AUDIO
INPUT JACKS
HDMI INPUT
VCR VIDEO INPUT JACK
FM ANTENNA JACK
POWER STANDBY Indicator
VCR VIDEO OUTPUT JACK
7.1 CH ANALOG
AUDIO INPUT JACKS
JACKS
FRONT SPEAKER TERMINALS
SURROUND SPEAKER TERMINALS
7.1CH IN STEREO button
FUNCTION button
POWER button
AUX IN Jack
VOLUME CONTROL
) button
INPUT MODE button
HEADPHONE Jack
SETUP button
TUNING MODE button
SELECT(
,
CENTER SPEAKER TERMINALS SURROUND BACK SPEAKER
DVD OPTICAL DIGITAL
AUDIO INPUT JACK
TERMINALS
MONITOR VIDEO OUTPUT JACK
[
]
DVD VIDEO INPUT JACK
SAT(Cable/Satellite/Set-top box) VIDEO INPUT JACK
SUBWOOFER AUDIO OUTPUT JACK
Display
SAT (Anynet+)
OPTICAL AUDIO INPUT JACK
CD COAXIAL DIGITAL
AUDIO INPUT JACK
VCR AUDIO OUTPUT JACKS
DOLBY DIGITAL EX INDICATOR
DVD AUDIO INPUT JACKS
LIVE SURROUND
INDICATOR
DIGITAL
INDICATOR
SAT AUDIO INPUT JACKS
SPEAKER INDICATORS
L.PCM INDICATOR
RADIO
BROADCASTING
RECEIVING INDICATOR
Accessories
√√
œœ
RADIO FREQUENCY
INDICATOR
FRONT DISPLAY
RADIO STEREO INDICATORS
DTS INDICATOR
Remote control
FM antenna
User’s manual
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
(Cont'd)
Description
[
]
Remote control
Insert remote control batteries
TV button
AMP button
DVD button
VCR button
DIMMER button
Remove the battery
cover in the direction
of the arrow.
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
cover.
1
2
3
POWER button
TV/VIDEO FUNCTION button
,
CD button
VCR button
DVD button
7.1 CH button
SAT button
AUX button
NUMBER (0~9) buttons
SLEEP button
SUBWOOFER button
INPUT MODE button
MO/ST button
TUNER button
EX/ES button
EXTERNAL DEVICE PLAYBACK button
MUTE button
Follow these precautions to avoid leaking or cracking batteries:
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
•
•
•
•
VOLUME CONTROL button
TUNING/CHANNEL button
TUNING MODE button
Do not expose batteries to heat or flame.
SETUP/MENU button
Range of operation of the remote control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated
at a horizontal angle of up to 30° from the remote control sensor.
CURSOR/ENTER button
DRC button
INFO button
TUNER MEMORY button
MODE button
NEO : 6 MODE button
STEREO button
EFFECT button
TEST TONE button
RDS selection buttons
SPK LEVEL button
SFE MODE button
SPK SELECT button
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Connecting the speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
ACTIVE SUBWOOFER
(BUILT-IN POWER AMPLIFIER)
PS-AW720S
SURROUND
BACK (R)
PS-AB720S
SURROUND
BACK (R)
PS-AB720S
FRONT (R)
PS-AF720S
FRONT (L)
PS-AF720S
SURROUND (R)
PS-AR720S
SURROUND (L)
PS-AR720S
SL
SR
MAIN UNIT
AV-R720
SYSTEM MODEL NAME : HT-AS720S
SBL
SBR
MAIN UNIT
AV-R720
FRONT SPEAKER
PS-AF720S
PS-AC720S
PS-AR720S
PS-AB720S
PS-AW720S
CENTER SPEAKER
SURROUND SPEAKER
SURROUND BACK SPEAKER
ACTIVE SUBWOOFER
Position of AV Receiver
Surround Speakers
CENTER
PS-AC720S
•
Place AV Receiver on a dedicated stand or rack.
•
•
Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they
face each other.
Front Speakers
•
Place them about 60 to 90cm (2 to 3feet) above your
ears, facing slightly downward.
•
•
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the
same height as your ears.
Align the front face of the front speakers with the front
face of the center speaker or place them slightly in
front of the center speaker.
❈ Unlike the front and center speakers, the surround
speakers are used to handle mainly sound effects and
sound will not come from them all the time.
√ CONNECTING SPEAKER WIRE
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each terminal.
3. Tighten the knob by turning clockwise to secure the wire.
SBL SBR
Surround Back Speakers
•
If you are using two rear center speakers, place them
facing forward from behind the listening position.
Place the surround back speaker about 70 cm to 1 m
(2.3~3.3feet) above surround speakers, facing slightly
downwards.
Center speaker
•
•
It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
•
Subwoofer
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
•
When you attach the speakers to a wall, make sure to
fasten them tightly so they do not fall off.
√ Connecting the Speakers
1
2
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire
into the red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the AV receiver.
• Make sure the colors of the speaker terminals match the colors
of the connecting plugs.
Subwoofer function
Active subwoofer with integrated 150W amplifier provides rich bass sound.
Black
Red
Connect the SW OUT terminal of the amplifier (AV-R720) to the INPUT
terminal of the subwoofer speaker.
1
2
3
•
Never touch speaker terminals while the power is on.
Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
This system is capable of reproducing 6.1/7.1 channel
sound, however only 5.1 speakers are supplied.
•
Keep the subwoofer speaker out of reach of children to
prevent them from inserting their hands or objects
into the duct (hole).
Press the POWER button on the rear side of the subwoofer to turn
the power on.
Caution
•
•
Using the subwoofer’s VOLUME control, you can set the desired bass level
(See page 28 "Setting Speaker Level" to set the subwoofer level in the menu).
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Connecting external devices
Connecting video devices
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SAT(Cable/Satellite/Settop Box)
DVD or Blu-RAY Player
•
•
If the external component has only one audio output
jack, connect it to either the right or left audio input
jack of the main unit.
Connect the audio cable's red plug to the red jack
and white cable to the white jack.
or
or
TV
•
•
Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
Even though the Digital Audio inputs are labelled DVD, SAT and CD, you can connect your DVD/SAT/CD player to
either the OPTICAL or COAXIAL digital audio input (as long as it matches the Digital audio output on your player).
TV
VCR
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Connecting external devices
(cont’d)
Connecting audio/7.1 channel devices
Connecting external devices via HDMI
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio
without conversion to analog.
DVD or Blu-RAY Player
SAT(Cable/Satellite/Set-top box)
CD Player
• Audio from SACD discs will not be played. To play a
DVD disk whose copyright is protected by CPPM, use a
player supporting CPPM.
• The quality of the audio output through the HDMI jack
(sampling frequency and bit rate) may be limited by the
performance of the connected device.
• Since HDMI connection supports both video and audio,
you don’t have to connect an additional audio cable.
•
Connect it if you
want to use Anynet+.
TV
High-bandwidth Digital Content Protection System (HDCP) support
To play digital contents through the HDMI connection, both of the connected external device and TV must support High-bandwidth Digital Content
Protection System (HDCP). This product supports HDCP.
COMPATIBILITY WITH A TV SUPPORTING HDMI
TV
Video/Audio
A TV with an HDMI jack.
A TV with a DVI-D jack (TV supporting HDCP)
A TV with a DVI-D jack (TV not supporting HDCP)
Video
-
DVD/Blu-RAY or 7.1 channel player
•
•
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the AV receiver using the TV’s remote
control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
Please check the
logo. If your TV has an
logo, then it supports the Anynet+ function.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Anynet+
Connecting external devices
(Cont'd)
Using Anynet+(HDMI-CEC)
Connecting AUX components
You can connect external devices you use (camcorder, game console, mobile equipment,etc.) to the front of this unit for
convenience.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 15)
1
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
2
•
You can operate the AV receiver by using the TV remote control.
(Available TV button : VOLUME button.)
,
If you select TV
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
•
Receiver : On : You can listen to audio through the AV Receiver.
•
Receiver : Off : You can listen to audio through the TV.
MOVE ENTER
EXIT
If you select the DVD Player
Camcorder
Select THEATER to connector and set the option of each items below.
•
View TV : If Anynet+(HDMI-CEC) set to on and you select View TV, the AV receiver will
automatically switch to SAT OPTIC2(DIGITAL IN).
•
•
Receiver : On : You can listen to audio through the AV receiver.
Receiver : Off : You can listen to audio through the TV.
MOVE ENTER
EXIT
To turn off Anynet+
1 Press SETUP/MENU button, and then press the ENTER button.
Connecting the FM antenna
•
“SETUP MODE” appears on the display and goes into Setup Mode.
2 Press œ √ button to select the “ANYNET+ MODE”, and then press the ENTER
button.
3 Press the …† button to set ANYNET+ to OFF.
- If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF.
To exit setup mode
•
Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• When selecting View TV, you must have a digital optical cable connected
from the TV to the AV receiver to listen to the TV sound through the AV
receiver.
FM antenna (supplied)
•
When you are making Anynet+ connection, do not connect more than two AV receivers
(Anynet+ installed). Otherwise, it can cause a malfunction.
Caution
FM antenna connection
With Anynet+
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a
wall or other rigid surface.
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on
your Samsung TV's remote control.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Before using the AV receiver
Selecting digital/analogue Input
You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.
Turning On/Off
Connect the power plug to the outlet.
Press the POWER button of the remote control.
•
This unit will be turned on or set to Standby mode.
Remote control functions
You can operate your AMP (this AV receiver), TV, DVD and VCR with this
remote control.
See pages 43-46 for more details.
REMOTE CONTROL
MAIN UNIT
To select a function
Press the INPUT MODE button.
Press the INPUT MODE button.
•
Each time the button is pressed, input mode changes
as follows:
•
Each time you press this button, input mode changes
as follows:
Method 1
Press the FUNCTION button.
For DVD/SAT function
•
Each time you press this button, FM ➝ 7. 1 MULTI CH ➝ CD ➝ DVD
➝ SAT ➝ VCR ➝ AUX will be selected in turn.
√
√
√
Method 2
or
Press CD, VCR, DVD, 7.1CH, SAT, AUX or TUNER button.
√
•
You can directly select the desired function.
For CD function
√
•
•
You can change the digital input setting for DVD, SAT and CD functions in the “DIGITAL IN” setup.
(See page 23)
You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external audio
component to the optical or coaxial digital audio input jack on the main unit.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Setting the speaker mode
Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration
and whether certain speakers are used or not.
√
REMOTE CONTROL
Press SETUP/MENU button, and then press ENTER button.
1
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
button to select the “SPK SETUP”, and then
2
3
MAIN UNIT
press ENTER button.
Press SETUP button, and then press ENTER ( ) button.
1
2
Press
button to select the speaker you want.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
•
Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
SUB ➝ CROVR will be selected in turn.
Press
button to select the “SPK SETUP”, and then
button.
press ENTER
(
)
Press …† button to set the mode (LARGE, SMALL etc.)
for the selected speaker.
4
5
Press button to select the speaker you want.
3
•
Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
Repeat steps 3-4 to set the mode for each speaker.
SUB ➝ CROVR will be selected in turn.
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
4 Press
…† button to set the mode (LARGE, SMALL etc.)
•
for the selected speaker.
Repeat steps 3-4 to set the mode for each speaker.
5
Using the SPK SELECT button
1 Press SPK SELECT button to select the speaker you want.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
•
Each time you press this button, FRONT ➝ CEN ➝ SURR ➝ S.BACK ➝
•
SUB ➝ CROVR will be selected in turn.
2 Press …† button to set the mode (LARGE, SMALL etc.)
for the selected speaker.
3 Repeat steps 1-2 to set the mode for each speaker.
Setting the Speaker
To turn the SUBWOOFER on or off.
Press SUBWOOFER button on the remote.
SPEAKER
FRONT(Front)
CEN(Centre)
Possible Settings
LARGE,SMALL
LARGE,SMALL,NONE
LARGE,SMALL,NONE
Default Setting
SMALL
•
LARGE : Select when using large speakers. You can listen to full
range sound.
SMALL : Select this when using small speakers
NONE : Select when no speaker is used
YES (subwoofer) : Select when using the subwoofer speaker.
NO (subwoofer) : Select when not using the subwoofer speaker.
CROVR : Select the crossover frequency for the best bass response
in your room.
•
Each time you press this button, SUB : YES, SUB : NO will be selected in turn.
•
•
•
•
•
SMALL
SMALL
SMALL
YES
SURR(Surround)
S.BACK (Surround Back) LARGE,SMALL,NONE
SUB(Subwoofer)
CROVR
(Crossover Frequency)
•
•
If FRONT is set to LARGE, you can select YES or NO for SUB.
If FRONT is set to SMALL, SUB is automatically set to YES.
NO cannot be selected.
YES,NO
60,80,100,120,
150,180,200(Hz)
150Hz
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Setting the speaker listening distance
Setting digital input
You can set the digital input for a DVD/SAT/CD player to either OPTICAL or COAXIAL to match the
connections you've made .
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the centre and surround speakers.
√
√
Press SETUP/MENU button, and then press ENTER button.
1
Press SETUP/MENU button, and then press ENTER
1
•
“SETUP MODE” appears on the display and goes into Setup Mode.
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
press ENTER button.
button to select the “DIST SETUP”, and then
2
3
Press
press ENTER button.
button to select the “DIGITAL IN”, and then
2
3
Press
button to select the speaker you want.
•
Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝
Press
function.
button to select the the CD, DVD or SAT
S.L ➝ S.W will be selected in turn.
•
Each time you press this button, CD ➝ DVD ➝ SAT will be selected in turn.
4 Press
…† button to set the speaker distance.
•
For F.L, CEN, F.R, S.W, S.R, SBR, SBL, S.L Speaker, you can set the distance
from the speaker to listening position between 0.3~9.0m in intervals of
0.3m.
Press …† button to set the digital input.
4
•
Each time you press this button, COAXIAL ➝ OPTICAL2 ➝ OPTICAL1
will be selected in turn.
To exit setup mode
•
Wait for about 5 seconds or press SETUP/MENU button.
To exit setup mode
“SETUP OFF” appears on the display and Setup Mode is exited.
•
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Setting Speaker Distance
Set the distance from the speaker to listening position in intervals of 0.3m.
•
•
•
•
F.L (front left) : 0.3m ~ 9m
•
•
•
•
CEN (centre) : 0.3m ~ 9m
F.R (front right) : 0.3m ~ 9m
SBR (surround back right) : 0.3m ~ 9m
S.L (surround left) : 0.3m ~ 9m
S.R (surround right) : 0.3m ~ 9m
SBL (surround back left) : 0.3m ~ 9m
SW (subwoofer) : 0.3m ~ 9m
•
You can select only one digital input for each function.
Example) If you have selected COAXIAL for the CD function,
you cannot select COAXIAL for the DVD or SAT function.
•
•
•
If the listening position is beyond the range of the speaker distance setup,
set the speaker distance to the maximum.
The distance range of the overall speaker system is determined based on
the F.L(front left) speaker distance from the listening position.
Function
DVD
Digital input
OPTICAL1
OPTICAL2
COAXIAL
Based on the max delay channel, the distance of the front speaker is
1.5m(5ms) and the surround speaker can be set up to 4.5m(15ms).
SAT
CD
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
(Dynamic Range Compression)
Setting HDMI AUDIO
Setting DRC
You can set HDMI audio settings.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder.
√
√
Before using!
Press SETUP/MENU button, and then press ENTER
•
•
Press the INPUT MODE button to select HDMI1 or HDMI2. (see page 19)
If you select Digital (Optical, Coaxial) or Analogue, the HDMI audio setting will be
deactivated.
1
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press SETUP/MENU button, and then press ENTER
1
Press
button to select the “DRC SETUP”, and
2
3
button.
then press ENTER button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
•
“DRC:STD” appears on the display.
Press
button to select the “HDMI AUDIO”, and then
2
3
Press …† button to set the DRC.
press ENTER button.
•
Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
•
“HDMI : AVR” appears on the display.
will be selected in turn.
Press …† button to set the HDMI audio.
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
•
Each time you press this button, HDMI : AVR ➝ HDMI : TV will be selected
•
in turn.
To exit setup mode
Using the DRC button
•
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Press DRC button.
Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN will be
•
selected in turn.
Setting HDMI AUDIO
Setting DRC
•
•
AVR : Audio is played on this product.
TV : Audio is played on a TV connected to the HDMI OUT jack and no audio is
played on this product.
•
•
•
STD : Sets DRC effect to standard.
MAX : Sets DRC effect to maximum.
MIN : Sets DRC effect to minimum.
•
•
This function is available when both video input and outputs HDMI.
HDMI AUDIO setting is available only when the HDMI output is
connected to a TV.
•
If you do not hear sound from the TV, should change the HDMI audio
output setting for your DVD PLAYER or SAT to PCM.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Test tone
Use the test tone check the speaker connection status or level.
To automatically output test tone
To Manually Output Test Tone
√
√
Press SETUP/MENU button, and then press ENTER
1
2
Press SETUP/MENU button, and then press ENTER button.
1
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
•
“SETUP MODE” appears on the display and the unit goes into Setup Mode.
Press ➛ꢀ❿ button to select the “TEST-T MANU”, and then
press ENTER button.
2
3
Press
button to select the “TEST-T AUTO”,
and then press ENTER button.
Press ➛ꢀ❿ button to select the speaker you want..
•
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝
•
Each time you press ➛ꢀ❿ꢀbutton, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL
S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
•
During test signal output, press …† button to adjust the individual speaker
output level from -10 to +10 dB by 1 step.
➝ S.L ➝ S.W will be selected in turn.
Press …† button to set the test tone as you want.
4
•
•
You can adjust the speaker output level from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
To stop test tone
•
Press SETUP/MENU button once time.
To stop test tone
“SETUP OFF” appears on the display and test tone stops.
•
Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
•
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝
SBR ➝ SBL ➝ S.L ➝ S.W.
•
During test tone output, press …† button to adjust the speaker output level from
-10 to +10 dB by 1 step.
Test Tone Output
•
•
•
•
•
•
•
•
F.L (front left) : -10 ~ +10dB
CEN (centre) : -10 ~ +10dB
F.R (front right) : -10 ~ +10dB
S.R (surround right) : -10 ~ +10dB
SBR (surround back right) : -10 ~ +10dB
SBL (surround back left) : -10 ~ +10dB
S.L (surround left) : -10 ~ +10dB
S.W (subwoofer) : -10 ~ +10dB
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Setting speaker level
Dolby Pro Logic llx mode
You can set the balance and level of speakers.
This mode provides 7.1 channel sound from 2 channel sources.
REMOTE CONTROL
√
Press
MODE button.
•
Each time you press this button, CINEMA ➝ MATRIX ➝ GAME
➝ PL ➝ MUSIC will be selected in turn.
Press SETUP/MENU button, and then press ENTER
1
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
button to select the “LEVEL SETUP”, and then
2
3
press ENTER button.
Press button to select the speaker you want.
MAIN UNIT
•
Each time you press
button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL
➝ S.L ➝ S.W will be selected in turn.
Press SURROUND button to select “DPLIIx MODE”.
1
2
•
Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO
Press …† button to set the speaker mode.
4
will be selected in turn.
•
You can adjust it from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
Press SELECT(
) button.
,
•
Each time you press SELECT (
) button, CINEMA ➝ MATRIX ➝
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
GAME ➝ PL ➝ MUSIC will be selected in turn.
•
•
Each time you press SELECT (
) button, MUSIC ➝ PL ➝ GAME ➝
MATRIX ➝ CINEMA will be selected in turn.
To exit setup mode
Using the SPK LEVEL button
•
Wait for about 5 seconds.
1 Press SPK LEVEL button to select the speaker you want.
•
Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L
Dolby Pro Logic llx mode
➝ S.W ➝ SPK LVL OFF will be selected in turn.
•
MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo
sources such as CD, TAPE, FM, TV and stereo VCR.
2 Press …† button to set the speaker level you want.
•
•
•
•
CINEMA : Adds realism to the movie soundtrack.
•
•
You can adjust it from -10 to +10dB by 1 step.
MATRIX : You will hear 7.1 channel surround sound.
GAME : Enhances the excitement of the game's sound.
The sound gets quieter at -10dB and louder at +10dB.
PL : You will experience a surround effect with just the front left and right speakers.
Setting Speaker Level
•
•
•
•
•
•
•
•
F.L (front left) : -10 ~ +10dB
•
•
•
You cannot use Dolby Pro Logic llx mode for multi channel signals such as
Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.
Sound will not be output from the surround back speaker if the PCM audio signal
is mono.
CEN (centre) : -10 ~ +10dB
F.R (front right) : -10 ~ +10dB
S.R (surround right) : -10 ~ +10dB
SBR (surround back right) : -10 ~ +10dB
SBL (surround back left) : -10 ~ +10dB
S.L (surround left) : -10 ~ +10dB
S.W (subwoofer) : -10 ~ +10dB
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Setting Dolby Pro Logic llx effect
Setting NEO:6 mode
This function works only in Dolby PRO LOGIC IIx MUSIC Mode.
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
REMOTE CONTROL
Press SETUP/MENU button, and then press ENTER
1
Press NEO:6 MODE button.
button.
•
Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
MAIN UNIT
Press
button to select the “
MODE”,
2
3
Press SURROUND button briefly to select “NEO:6” mode.
1
and then press ENTER button.
•
Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will
be selected in turn.
Press
button.
,
Press SELECT(
) button.
2
•
Each time you press this button,
•
Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
C-WIDTH ➝ DIMENSION ➝
PANORAMA will be selected in turn.
To set the height of the center sound image
Press …† button to set the
Dolby Pro Logic llx effect you
want.
4
If your TV (or screen) is installed high on a wall, you can raise the center
sound image of the front and center speakers to compensate.
Press SETUP/MENU button, and then press ENTER button.
1
•
“SETUP MODE” appears on the display and goes into Setup Mode.
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
•
Press
press ENTER button.
button to select the “NEO:6 MODE”, and then
2
•
“CEN -- IMG : 2” appears on the display.
Using the
EFFECT button
1 Press
MODE button to select ‘MUSIC’ Mode.
2 Press
EFFECT button.
3Press
…† button to set the sound image you want.
•
Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA
•
•
You can set the sound image from 0 to 5.
will be selected in turn.
This parameter adjusts the height of the center image through the front and
center speakers. “0” is the lowest while “5” is the highest.
3 Press …† button to select Dolby Pro Logic IIx effect you want.
•
•
•
C-WIDTH : You can set from 0 to 7.
DIMENSION : You can set from -7 to +7.
PANORAMA : You can set it ON or OFF.
To exit setup mode
•
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
NEO : 6 Mode
Dolby Pro Logic llx effect
•
C-WIDTH : This sets the width of the centre image. The higher the setting, the
less sound comes from the centre speaker.
This mode decodes 2 channel signals to a high precision digital matrix decoder.
for 6.1 channel sound.
•
•
DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround.
PANORAMA : This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.
•
•
MUSIC : NEO:6 MUSIC mode is optimized for music playback
CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
•
•
NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Setting EX/ES mode
Setting Tone Control
When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound
using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or
DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.
This function allows setting up the tone quality of the front speaker.
Press SETUP/MENU button, and then press ENTER button.
1
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
press ENTER button.
button to select the “EX/ES SETUP”, and then
2
1
2
3
Press SETUP/MENU button, and then press the ENTER button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
•
“EX/ES : AUTO” appears on the display.
Press
button to select the “TONE CONTROL”, and
Press …† button to set
the EX/ES you want.
then press the ENTER button.
3
Press button.
•
Each time you press this button,
EX/ES : AUTO ➝ EX/ES : ON ➝
EX/ES : OFF will be selected in turn.
•
Each time you press this button, BASS ➝ TREBLE ➝ TONE : OFF will be
selected in turn.
•
If it is set to TONE: OFF, the Tone Control function will be disabled.
To exit setup mode
4 Press
…† button to set the tone control you want.
•
Wait for about 5 seconds or press SETUP/MENU button.
•
•
You can adjust it from -6 to +6dB by 1 step.
“SETUP OFF” appears on the display and Setup Mode is exited.
The sound gets smaller at -6dB and louder at +6dB.
Using the EX/ES button
To exit setup mode
•
Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Press EX/ES button.
•
Each time you press this button, EX/ES : AUTO ➝ EX/ES : ON ➝ EX/ES : OFF
will be selected in turn.
•
The EX/ES button on the remote control is enabled only if the input source is of
Dolby Digital or DTS.
EX/ES Mode
•
AUTO : If the unit receives an audio signal that it can recognize, it will select an
optimal decoder for playback in 6.1/7.1 channel.
If the amplifier does not recognize the audio signal, it will not play in
6.1/7.1 channel automatically.
•
•
ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using Dolby
Digital Surround EX / DTS ES decoder.
OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.
Dolby Digital - EX
DTS-ES (Discrete 6.1, Matrix 6.1)
Movie soundtracks encoded with Dolby Digital EX will play audio over
the surround back channels also.
A surround back channel is added to the DTS 5.1 channel
system, improving the sense of sound directionality and space.
A built-in DTS-ES decoder has been equipped with this system
that supports discs encoded with DTS-ES Direct and DTS-ES
Matrix.
•
Tone Control function is available only in the Stereo mode.
•
•
•
You cannot use Dolby Digital-EX in the system without
Surround Back speakers connected.
•
You cannot use DTS-ES without surround back
speakers connected.
EX/ES Mode must be set to On when playing back discs
encoded with 6.1 channel Dolby Digital-EX.
Some discs encoded with Dolby Digital-EX do not contain
an identification signal. In this case, set EX/ES to ON.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
SFE mode
Stereo mode
The SFE (Sound Field Effect) function uses 7 different DSP sound field effects to digitally simulate actual music
environments such as concert halls or cinemas.
You can select this mode when listening to sound through the front left and right speakers and subwoofer.
REMOTE CONTROL
REMOTE CONTROL
Press SFE MODE button.
Press STEREO button.
•
Each time you press this button, HALL ➝ THEATER ➝ ARENA ➝ CLUB ➝
•
“STEREO” appears in the display and
Stereo Mode is selected.
DOME ➝ STADIUM ➝ CHURCH will be selected in turn.
MAIN UNIT
Press SURROUND button to select ‘STEREO’.
•
Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will be
selected in turn.
•
If you press the STEREO button on the player, it will switch to STEREO mode.
To exit setup mode
•
Wait for about 5 seconds.
Surround Mode and Input Signal Chart
o = active, – = inactive
MAIN UNIT
Display Information
Channel Status
Output Channel
Surround
Input Signal
Decoding
Mode
SBL
SL
Display Signal Format
L/R
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
C
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
SubW
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
SBR
SR
Press SURROUND button to select ‘SFE’ Mode.
1
2
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Dolby D Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
Analog
Dolby Digital 5.1
Dolby Digital 5.1
Pro Logic II x
Pro Logic II x
Pro Logic II x
Pro Logic II x
Neo:6
DIGITAL
DIGITAL
DIGITAL
DIGITAL
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SW
•
Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO
DOLBY
(MUSIC,
CINEMA,
MATRIX,
GAME,
–
will be selected in turn.
O
O
O
O
O
O
O
O
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SW
Press SELECT(
) button.
,
L.PCM
PRO LOGIC
)
•
Each time you press Select (
) button, HALL ꢀꢁ THEATER ꢀꢁ
,
ANALOGUE
L.PCM
ARENA ꢀꢁ CLUB ꢀꢁ DOME ꢀꢁ STADIUM ꢀꢁ CHURCH will be selected
in turn.
L.PCM (Audio)
Analog
NEO:6
(MUSIC,
CINEMA)
Neo:6
ANALOGUE
DIGITAL
DIGITAL
DIGITAL
DIGITAL
L.PCM
Dolby D (2ch)
Dolby D (2ch Surr)
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
Analog
Neo:6
To exit setup mode
Neo:6
•
Wait for about 5 seconds.
DD+SFE
DD+SFE
SFE
–
–
–
–
O
O
O
O
L, C, R, SL, SR, SW
SFE
L, C, R, SL, SR, SW
SFE
ANALOGUE
DIGITAL
DIGITAL
dts, ES
L, C, R, SL, SR, SW
Dolby D Surr. EX
Dolby D (5.1ch)
DTS-ES
Dolby Digital EX
Dolby Digital EX
DTS-ES
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, C, R, SL, SR, SBL, SBR, SW
L, R, SW
EX/ES
DTS (5.1ch)
DTS-ES
dts
Dolby D (2ch)
Dolby D (2ch Surr)
L.PCM (Audio)
L.PCM 96KHz
Analog
Stereo
–
–
–
–
–
DIGITAL
DIGITAL
L.PCM
Stereo
–
–
L, R, SW
STEREO
Stereo
–
–
L, R, SW
Stereo
–
–
L.PCM
L, R, SW
Stereo
–
–
ANALOGUE
L, R, SW
L/R : front speaker (left/right) C : centre speaker SL/SR : surround speaker (left/right) SBL/SBR : surround back speaker (left/right)
SW : subwoofer
•
•
Channel status displays are dependent on the speaker configuration.
SFE mode works with 2-ch signals.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Listening to radio
Presetting radio Stations
You can listen to the chosen band (FM) by using either automatic or manual tuning.
You can preset up to 30 FM stations.
E.g.: Setting station FM 89.10 in preset 2 .
REMOTE CONTROL
Press TUNER button.
Press TUNER button.
1
1
2
Press TUNING MODE button to
select MANUAL and then press
2
Selected frequency.
•
•
•
Automatic tuning 1
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( ) button to select the preset frequency.
Automatic tuning 2
1) Press TUNING MODE button to select MANUAL
2) Press and hold TUNING/CH ( ) button to automatically tune in frequency.
:
TUNING/CH(
) button to
,
select 89.10.
,
•
Refer to step 2, page 36, to tune in
:
automatically and manually.
,
Press TUNER MEMORY button.
Manual tuning
:
3
4
1) Press TUNING MODE button to select MANUAL.
•
Tuner number will blink on the display.
2) Press TUNING/CH (
) button briefly to increase or decrease the
,
frequency step by step.
Press TUNING/CH(
to select preset 2.
,
) button
MAIN UNIT
•
You can select from presets 1 to 30.
Press FUNCTION button to select FM.
1
2
5
6
Press TUNER MEMORY button.
•
Tuner number will disappear and station 89.10
Select the frequency.
will be saved in preset 2.
•
•
•
Automatic tuning 1
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( ) button to select the preset frequency.
Automatic tuning 2
1) Press TUNING MODE button to select MANUAL
2) Press and hold TUNING/CH ( ) button to automatically tune in frequency.
:
To preset other stations, repeat
steps 2 to 5.
,
:
,
To Listen to Preset Station
Press TUNING MODE button of the remote control to select the PRESET
and press TUNING/CH ( ) button.
Manual tuning
:
•
1) Press TUNING MODE button to select MANUAL.
,
2) Press TUNING/CH (
) button briefly to increase or decrease the
,
frequency step by step.
To Listen to mono/stereo
Press MO/ST button on the remote.
•
Each time you press this button, STEREO ➝ MONO will be selected in turn.
If you select MONO in the area with weak reception,
it will help to reduce noise.
•
•
This function works only with the Remote Control.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
About RDS broadcasting
PTY (Program Type) indication and PTY-SEARCH function
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals.
For example, the stations send their station names, as well as information about what type of
program they broadcast, such as sports or music, etc.
One of the advantages of the RDS service is that you can locate a particular kind of programme from
the preset channels by specifying the PTY codes.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
To search for a programme using the PTY codes
Display
NEWS
Program Type
Description on RDS function
•
• News including an announced opinion and
report
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station
and is composed of 8 characters.
Before you start, remember...
The PTY Search is only applicable to preset
stations.
To stop searching any time during the process,
press PTY SEARCH while searching.
•
• Several subjects including current affairs,
documentary, discussion and analysis.
AFFAIRS
INFO
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
• Information including weights and measures,
returns and forecasts, matters interesting the
customer, medical information, etc.
•
There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
•
SPORT
EDUCATE
DRAMA
• Sports
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic
announcement is in progress.
• Education
• Drama, radio serial etc.
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
•
• Culture : national or local culture including the
religious problem, social science, language,
theatre,etc.
RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
•
CULTURE
SCIENCE
VARIED
• Natural science and technology
• Others: lectures, entertainment programmes
(quiz and game shows), interviews, comedy
and satirical plays etc.
Press PTY SEARCH while listening to an
POP M
• Pop music
• Rock music
1
2
FM station.
What information can RDS signals provide?
ROCK M
• Current contemporary music considered to be
“easy listening.”
M.O.R.M
LIGHT M
You can see the RDS signals the station sends on the display.
Press the PTY-or PTY+until the PTY code
you want appears on the display.
TO show the RDS signals
• Light classical music - classical music and
instrumental and chorus music
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information :
• Heavy classical music - orchestra music,
symphony, chamber music and opera
The display gives you the PTY codes described
to the right.
•
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL A
• Other music - jazz, R&B country music
• Weather
PS (Program Service) : While searching, "PS" appears and then the station names will be
displayed. "NO PS" appears if no signal is sent.
RT(Radio Text) : while searching, "RT" appears and then text messages the station
sends will be displayed. "NO RT" appears if no signal is sent.
Frequency : station frequency (non-RDS service)
• Finance
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
• Children’s programmes
• Social affairs
• Religion
3
RELIGION
PHONE IN
TRAVEL
The centre unit searches 15 preset FM
stations, stops when it finds the one you
have selected, and tunes in that station.
•
• Phone in
About characters shown in the display
When the display shows PS, or RT signals, the following characters are used.
• Travel
• Leisure
LEISURE
JAZZ
The display window cannot differentiate upper case and lower case letters and always
uses upper case letters.
•
• Jazz music
The display window cannot show accented letters, “A,” for instance, may stands for
accented “A’s” like “À, Â, Ä, Á, Åand Ã.”
•
• Country music
• National music
• Oldies music
• Folk music
COUNTRY
NATION M
OLDIES
If searching finishes at once, “PS”, and “RT” will not appear on the display.
•
FOLK M
• Documentary
DOCUMENT
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Convenient functions
Sleep timer function
You can set the time that this unit will shut itself off.
Press the SLEEP button.
Reset function
REMOTE CONTROL
•
SLEEP : OFF ➝15 ➝30 ➝45 ➝60 ➝90 ➝120 M (MIN) will be selected in turn.
Press the MUTE button.
1
•
MUTE appears on the display.
To check sleep timer
Press SLEEP button.
Press “0” button five times and then
2
press ENTER button.
•
•
The remaining time before this unit will shut itself off is shown on the display.
Pressing the button again changes the sleep time from what you set previously.
•
“INITIAL : NO” appears on the display.
Press …† buttons to select “YES”.
3
•
The unit will turn off after 5 seconds.
To cancel sleep timer
•
Press SLEEP button until “SLEEP : OFF” appears on the display.
MAIN UNIT
Turn off the power and hold the SELECT( ) button for
1
Mute function
longer than 5 seconds.
This function is useful when answering a doorbell or telephone call.
•
POWER STANDBY indicator will flash.
Press the MUTE button.
•
MUTE appears on the display.
Caution!
•
•
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
To output sound again
Press MUTE button again.
•
MUTE will disappear and sound will output.
•
SLEEP, Mute and the Adjust Display function can only be
operated with the remote control.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
(cont’d)
Convenient functions
Operating your TV with the remote control
Adjust the display
Press POWER button to turn on
the TV.
You can adjust the brightness of the display.
1
Press the DIMMER button.
•
Each time you press this, the brightness changes as follows : DARK ➝ BRIGHT.
Press TV button to set the remote to TV
mode.
Using headphones
2
Use headphones (not supplied) for private listening pleasure.
Connect the headphones to the headphone jack and listen to
music.
Point the remote control toward the TV.
3
While holding down POWER button,
enter the code corresponding to your
brand of TV.
4
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
•
If the code matches the TV's code, the TV will be turned off.
If TV is turned on or off when you press the
power button of the remote control, the
setting is completed.
5
•
You can use the TV POWER, VOLUME, CHANNEL, MENU and
Numeric buttons (0~9).
•
Do not turn the volume up too high when you use headphones as It
may damage your hearing.
•
•
The remote control may not work on some brands of TVs. Also, some operations
may not be possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Operating your TV with the remote control
(cont’d)
Operating your DVD or VCR with the remote control
TV Brand Code List
Press POWER button to turn on the DVD
(VCR).
Brand
ADMIRAL(M.WARDS) 056,057,058
Code Number
Brand
LUXMAN
Code Number
Brand
SYLVANIA
Code Number
018,040,048,054,059,
1
018
AMARK
ANAM
001,015
LXI(SEARS)
019,054,056,059,060,
062,063,065,071
015,017,018,048,054,
059,060,062,072,089
040,054
060,062
001,002,003,004,005,
006,007,008,009,010,
011,012,013,014
001,018,040,048
SYMPHONIC
TATUNG
TECHWOOD
TEKNIKA
TMK
061,095,096
MAGNAVOX
006
018
AOC
MARANTZ
MATSUI
003,015,018,025
Press DVD button to set the remote to
BELL&HOWELL(M.WARDS) 057,058,081
054
018,040
BROCSONIC
CANDLE
059,060
MGA
018,040
TOSHIBA
019,057,063,071,101
DVD mode.
2
018
MITSUBISHI/MGA
018,040,054,059,060,
075,101
107,109,110,111,113
•
If you operate VCR, press VCR button to set the remote to VCR mode.
CETRONIC
CITIZEN
003
VIDTECH
VIDECH
WARDS
018
003,018,025
MTC
NEC
018
059,060,069
CINEMA
097
018,019,020,040,059,
060
015,017,018,040,048,
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
003
054,060,064
018
NIKEI
003
YAMAHA
YORK
018
Point the remote control toward the DVD
(VCR).
046
ONKING
ONWA
003
040
3
4
015
003
YUPITERU
ZENITH
003
003,005,061,082,083,
PANASONIC
006,007,008,009,054,
066,067,073,074
018
058,079
084
062
003
ZONDA
001
CROSLEX
CROWN
PENNEY
PHILCO
DONGYANG
LOWE
003,054
003,015,017,018,048,
054,059,062,069,090
015,017,018,040,048
054,062,072,112,114,
117,118
054
While holding down POWER button, enter
the code corresponding to your brand of
DVD (VCR).
CURTISMATHES 059,061,063
FINLUX
054,109,114
CXC
003
PHILIPS
YOKO
054
DAEWOO
002,003,004,015,016,
017,018,019,020,021,
022,023,024,025,026,
027,028,029,030,032,
034,035,036,040,048,
059,090,099,100
040
LOEWEOPTA
PHONOLA
RADIOLA
SCHNEIDER
AKAI
054,114
054,112,114
PIONEER
063,066,080,091
015,018,059
054,112
•
If there is more than one code listed for your DVD (VCR) in
the table, enter one at a time to determine which code works.
If the code matches the DVD (VCR)'s code, the DVD (VCR)
will be turned off.
PORTLAND
PROTON
054
040
103
QUASAR
006,066,067
GRUNDIG
108,109,113,119,120,
•
DAYTRON
DYNASTY
EMERSON
RADIOSHACK
017,048,056,060,061,
075
121
108
108
113
113
113
114
114
114
114
114
114
114
114
114
116
003
BLAUPUNKT
SIEMENS
CGE
003,015,040,046,059,
061,064,082,083,084,
085
RCA/PROSCAN
018,059,067,076,077
078,092,093,094
003,019
If DVD (VCR) is turned on or off when you
press the power button of the remote
controller, the setting is completed.
REALISTIC
SAMPO
IMPERIAL
MIVAR
FISHER
019,065,103
003
040
5
FUNAI
SAMSUNG
000,015,016,017,040,
043,046,047,048,049,
054,059,060,098
019,061,065,101,102,
103,104
SABA
FUTURETECH
003
BANG&OLUFSEN
BRIONVEGA
FORMENTI
METZ
GENERALELECTRIC(GE) 006,040,056,059,066,
067,068
•
You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE,
STOP, SKIP, MENU and Numeric button (0~9).
SANYO
HALLMARK
HITACHI
INKEL
040
015,018,050,059,069
045
SCOTT
SEARS
SHARP
003,040,060,061
015,018,019
WEGA
RADIOMARELLI
SINGER
JCPENNY
JVC
056,059,067,086
070
015,057,064,101,105,
106,115
SINUDYNE
TELEFUNKEN
KTV
059,061,087,088
003,015,040
015
SIGNATURE2000 (M.WARDS) 057,058
KEC
SONY
050,051,052,053,055,
KMC
101
LG(GOLDSTAR)
001,015,016,017,037,
038,039,040,041,042,
043,044,054,086
SOUNDESIGN
SPECTRICON
SSS
003,040
001
•
•
The remote control may not work on some brands of DVD (VCR).
Also, some operations may not be possible depending on your brand
of DVD (VCR).
018
The remote control will work with Samsung DVD (VCR) by default.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
Operating your DVD or VCR with the remote control
Before calling for service
(cont’d)
VCR Brand Code List
Check
Remedy
Symptom
Brand
Code Number
Brand
Code Number
Brand
Code Number
ADMIRAL (M.WARDS) 043,106
MEI
001
001
100
020
,
033
TASHIRO
050
047
044
001
001
006
•
•
Connect the power plug to the outlet.
The unit will not turn on.
•
•
Is the power cord plugged into the outlet?
AWIA
AKAI
044,045,046
MEMOREX
,
025,
033
,
054
,
091
,
TATUNG
,
052
047
033
025
,
092
052
088,089,090
001,002,003,004,005,
033
TEAC
,
,
,
092
091
ANAM
MINOLTA
MITSUBISHI/MGA
MTC
,
021,
062
TECHNICS
TEKNIKA
,
,
049,
A function does not work
Is there static electricity in the air?
Disconnect the power plug and connect it
again.
068,
069,
070,
101,
102
092
,
,
033
when the button is pressed.
AOC
091
072
TOSHIBA
,
051
072
AUDIODYNAMIC
019,047,092
MULTITECH
NEC
044,
057
047
091
,
069
TOTEVISION
TAEKWANG
UNITECH
025
087
072
019
019
072
,
•
Are the speakers and external
components connected properly?
Is the Mute function on?
Is the volume set to minimum?
Is the speaker setup set incorrectly to
NONE?
Do you see the message of “NOT
SUPPORT” in playing a MPEG audio file?
•
Connect them correctly.
BELL&HOWELL(M.WARDS) 048
,
093
094
033
019,
,
052,057,
BROKSONIC
CANON
092
,
,
095
OLYMPIC
OPTIMUS
ORION
049
101
103
,
001,
,
049,
091
VECTORRESEARCH
VIDEOCONCEPTS
VIDEOSONIC
WARDS
•
•
•
•
•
•
Press Mute button to cancel the function.
Adjust the volume.
Refer to pages 20~21 to select LARGE,
SMALL or YES.
CAPEHART
CITIZEN
011
050
Sound is not produced.
PANASONIC
001
091
019
001
,
004,
033,
049,
067,
CRAIG
050,
072,
096
,
107
001
043
105
019
019
,
020
050
106
,
031,
032,
033
,
CRITERION
CURTISMATHES
051
PENNEY
PENTAX
PHILCO
,
020
020
033
,
072
,
,
054,
072,
100,
•
001,
031,
032,
033,
044,
,
,
021,
033,
062
,
,
109
•
The file format of MPEG is not supported.
Change the audio format of the source
device (Blu-RAY Player) to PCM.
091
001,
,
046,
049,
091,
YAMAHA
ZENITH
,
047,048 052,092
,
,
DAEWOO
006
,
007
012
017
,
008
013
018
,
009,
010
015
051
,
094
,
047,048,052,092
011,
,
,
014,
,
PHILIPS
001,
030,
033,
049,
050,
016
091
011
,
,
,
046,
,
066
025
049
011
,
091
Picture does not appear on a TV
when the function is selected.
•
Is the external component connected
properly?
DVD Brand Code List
•
Connect it correctly.
PILOT
DAYTRON
DBX
PIONEER
PORTLAND
QUASAR
019
025
094
,
047
031
095
048
,
052
032
097
053
,
092
Brand
Code Number
•
•
Are the batteries drained?
Is the distance between remote
control and main unit too great?
•
•
Replace with new batteries.
Operate at close distance.
EMERSON
,
,
,
044
098
054
,
046
099
055
,
001,
033,
049,067,091,
Remote controller does
not work.
,
,
,
,
107,
108
DENON
003,
032
FISHER
009
100
044
,
,
,
,
,
RICO
036
DOONOON
DMTECH
FISHER
019
017
002
006
012
RCA/PROSCAN
001
033
070
001
044,048
101,105
000 006
058,071
075 076
080 081
008 009
054 058
092
006
070
020
,
020
049
091
009
,
021,
031,
032,
•
Are the left/right speaker or left/right
input/output cables connected
properly?
FUNAI
,
,
051,
062,
066,
•
Check the left/right channel and connect
it/them correctly.
The sound from the
left/right channels is
reversed.
GENERALELECTRIC (GE)
001
,
031
060
021
,
032,
033,
056,
,
,
104
GE
091
REALISTIC
SAMSUNG
,
,
025,
033
,
HARMAN/KARDON
JVC
GOVIDEO
HARMANKARDON
HITACHI
059,
,
061
,
054
,
091,
010
008
001
004
,
013
019
KENWOOD
LG
•
Is FM antenna connected properly?
•
•
Connect the antenna correctly.
020
100
051
,
,
049,
054,
062,
,
,
031
072
077
,
032
073
078
,
057
074
079
,
Can't receive radio
broadcasts.
,
,
,
,
MAGNAVOX
MITSUBISHI
ONKYO
If the input strength of antenna signal is
weak, install the FM antenna in a place
with good reception.
HQ
,
,
,
,
,
005,
016
014
INSTANTREPLAY
JCL
001
,
033
,
049,
091
,
004
011
021
006
,
001,
025
033
SANYO
,
,
046,
048,
050,
OPTIMUS
PANASONIC
PROSCAN
PHILIPS
PIONEER
RCA
JCP
,
,
093,
100
•
•
•
Is the surround speaker connected
properly?
•
•
•
Refer to pages 12~13 to connect them
properly.
JCPENNY
047,
048,
052,
062,
091,
SANSUI
SCOTT
092
,
051
100
021
105
,
054
101
025
106
,
057,
069,
004,
023
There is no sound from
surround speakers.
JVC
001
064
047
019
024
029
020
,
033
065
050
020
025
030
025
054
,
047,
052,
063,
,
,
007,
011,
022,
025
Refer to pages 20~21 to select LARGE or
SMALL.
Is SURR (surround) incorrectly set to
NONE in speaker setup?
,
,
092
SEARS
SHARP
SINGER
,
,
006
KENWOOD
,
,
052,
092
043,
,
SAMSUNG
SANYO
000,
027
Refer to pages 29~35 to select proper
Surround Mode.
LG(GOLDSTAR)
,
,
021,
022,
023,
096
002
Is surround mode set to stereo?
,
,
026,
027,
028,
SIGNATURE2000 (M.WARDS) 043
,
044,
054,
100,
106
SONY
015, 020
011
,
,
050
SHINTOM
SONY
096
034
039
083
020
THETADIGITAL
TOSHIBA
YAMAHA
ZENITH
•
•
Is the centre speaker connected properly?
•
•
Refer to pages 10~11 to connect it properly.
LXI(SEARS)
,
,
044,
048,
050,
,
035
040
084
,
036
041
085
,
037
042,082
086
,
038,
004, 018
009, 033
004, 024
026
053,
,
055,
062,
100
,
,
,
,
Is CEN (centre) incorrectly selected to
NONE in speaker setup?
Refer to pages 20~21 to select LARGE or
SMALL.
There is no sound from
centre speaker
MAGIN
072
,
,
,
MAGNAVOX
001
066
001
092
025
,
031
,
032,
033,
049,
STS
TAEGWANG
PS2
,
067,
091
SYLVANIA
001
091
044
009
,
033,
044,
049,
066,
028
•
Is the surround mode selected to stereo?
•
Refer to pages 29~35 to select other
Surround Modes.
MARANTZ
MARTA
,
019
110
050
,
033,
047,
052,
X-BOX
029
,
SYMPHONIC
TANDY
APEX
030
,
MARANTZ
031
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
(cont’d)
Before calling for service
Specifications
Power supply
Standby power consumption
230V, 50 Hz
0.9W
Symptom
Check
Remedy
Main unit
Subwoofer
100W
90W
5.8 kg
430 x 145 x 350 mm
+5°C~+35°C
10%~75%
87.5~108.0MHz
12dBf
MONO/STEREO 55/55dB
MONO/STEREO 0.3/0.8%
30dB
1kHz, 75kHz Dev
20Hz~20kHz/THD = 10%
4 Ω 100W/CH
4 Ω 100W/CH
4 Ω 100W/CH
4 Ω 100W/CH
450mV/47kΩ
80dB
•
•
•
Are the surround back speakers
connected properly?
•
•
•
Refer to pages 10~11 to connect it properly.
Power consumption
GENERAL
FM TUNER
AMPLIFIER
Weight
There is no sound from
surround back speakers
Is the S.BACK(Surround Back) selected
to NONE in Speaker Setup?
Refer to pages 20~21 to select LARGE or
SMALL.
Refer to page 32 to set Surround Mode
to EX/ES.
Dimensions (W x H x D)
Operating temperature range
Operating humidity range
Frequency response
Usable sensitivity
S/N ratio
Is Surround Mode set to EX/ES?
•
•
Refer to pages 20~21 to select LARGE or
SMALL.
•
•
Is S.BACK(Surround Back) selected to
NONE in Speaker Setup?
Can't select EX/ES mode.
Use 7.1 channel external component.
Is the input signal selected properly?
Distortion
Stereo separation
Tuner output level
Rated output
Front speaker(left+right)
Center speaker
Can't select Dolby Pro
Logic llx mode.
•
Select 2 channel Dolby Digital, PCM, and
Analogue input signal.
•
Is the input signal selected properly?
•
•
Use PCM and Analogue input signal.
•
•
Is the input signal selected properly?
Is Digital input selected?
Can't select NEO:6 mode.
Surround speaker(left+right)
Surround back
Input sensitivity/impedance
S/N ratio (analog input)
Separation (1kHz)
Analog input
Digital input/96kHz PCM
TV format
There is no sound when
playing a DTS encoded
DVD.
Check whether the DVD player is properly
connected and refer to page 24 to select
the digital input.
60dB
20Hz~20kHz( 3dB)
20Hz ~44kHz( 3dB)
NTSC/PAL
FREQUENCY
RESPONSE
Input level/impedance
Output level/impedance
Video frequency response
S/N ratio
1Vp-p/75 Ω
1Vp-p/75 Ω
5Hz to 10kHz(-3dB)
60dB
VIDEO
OUTPUT
Product protection function
Heat protection
Speaker system
Impedance
Front / Surround / Surround back
4Ω x 6
Centre
4Ω
Subwoofer speaker
•
If PROTECTION appears on the display,
check whether the speaker terminal is shorted
and then turn on the unit
•
The protection function will come on if the main unit or power
transformer overheats.
S
8Ω
150W
P
E
A
K
E
R
S
"
" will appear in the display .
This function will come on :
Rated input
100W
100W
Maximum input
Dimensions (W x H x D)
Weight
200W
200W
300W
- If speaker terminal is shorted
- If speaker cable is shorted
If there is no problem when you turn the unit on again after
turning it off, PROTECTION mark will disappear on the
display and the unit will work properly.
100 x 270 x 97 mm
1.4 Kg / 1.2 Kg / 1.2 Kg
300 x 90 x 94 mm
1.4 Kg
311 x 378 x 443 mm
14.4 Kg
❈ S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio Engineering Society) guidelines.
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
|