Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Web Site
Customer Care Centre
AUSTRALIA
CHINA
1300 362 603
800-810-5858
400-810-5858
010-6475 1880
HONG KONG:3698 - 4698
INDIA
3030 8282
1-800-3000-8282
1800 110011
INDONESIA
JAPAN
0800-112-8888
0120-327-527
LCD TV
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
1800-88-9999
0800 SAMSUNG (0800 726 786)
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
user manual
1800-29-3232
02-689-3232
TAIWAN
0800-329-999
VIETNAM
SOUTH AFRICA
U.A.E
1 800 588 889
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model
Serial No.
BN68-01717L-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Without producing harmful VOC (Volatile Organic Compounds),
Samsung’s Eco-friendly “Crystal Design” expresses color gradation
thanks to our dual injection technology.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also
known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still
image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
•
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CONNECtING AND PREPARING YOUR tV
SEttING thE PC
List of Parts ........................................................ 2
Installing the Wall Mount Kit............................... 2
Viewing the Control Panel.................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control............................... 6
Installing Batteries in the Remote Control.......... 7
Switching On and Off ......................................... 7
Placing Your Television in Standby Mode........... 7
Viewing the Menus............................................. 8
Using the TOOLS Button.................................... 8
Plug & Play......................................................... 9
Setting up Your PC Software
(Based on Windows XP) .................................. 33
Display Modes.................................................. 33
Setting up the TV with your PC ........................ 34
WISELINk PRO
Connecting a USB Device................................ 35
Using the WISELINK Pro Function .................. 36
Using and Sorting Photo List............................ 38
Viewing a Photo or Slide Show ....................... 40
Using and Sorting the Music List...................... 42
Playing a Music ............................................... 44
Using and Sorting the Movie List ..................... 45
Playing a Movie File ........................................ 46
Deleting the Photo/Music/Movie File ............... 49
Using the Setup Menu...................................... 49
SEttING thE ChANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Adding / Locking Channels .............................. 12
Sorting the Stored Channels............................ 13
Assigning Channels Names............................. 13
Fine Tuning Channel Reception....................... 14
WISELINk PRO-DLNA
Setting the DLNA Network ............................... 50
Installing the DLNA Application ........................ 50
Using the DLNA Application ............................. 52
Using the DLNA Function................................. 56
SEttING thE PICtURE
Changing the Picture Standard........................ 15
Adjusting the Custom Picture........................... 16
Configuring Detailed Settings on the Picture ... 16
Configuring Picture Option............................... 18
Resetting the Picture Settings to the Factory
CONtENt LIbRARY
Activating the Content Library.......................... 57
Using the Content Library ................................ 58
Using Additional Content Using External
Defaults............................................................ 19
Viewing the Picture In Picture (PIP) ................. 20
USB Memory Storage ...................................... 59
+
SEttING thE SOUND
AbOUt ANYNEt
Sound Features................................................ 21
Selecting the Sound Mode............................... 22
Connecting Headphones (Sold separately) ..... 22
What is Anynet+? ............................................ 61
Connecting Anynet+ Devices ........................... 61
Setting Up Anynet+ .......................................... 62
Scanning and Switching between Anynet+
Devices ............................................................ 63
Recording......................................................... 65
Listening through a Receiver ........................... 65
Check Points before Requesting Service......... 66
SEttING thE tIME
Setting and Displaying the Current Time.......... 23
Setting the Sleep Timer.................................... 23
Switching the Television On and Off
Automatically.................................................... 24
RECOMMENDAtIONS FOR USE
Teletext Feature ............................................... 67
Auto Wall-Mount (Sold separately)
FUNCtION DESCRIPtION
(depending on the model) ................................ 69
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 70
Securing the TV to the Wall.............................. 71
Troubleshooting: Before Contacting
Service Personnel............................................ 72
Specifications................................................... 73
Choosing Your Language................................. 24
Melody / Entertainment / Energy Saving ......... 25
NEtWORk SEttINGS
Network Connection......................................... 27
Cable Network Setup ....................................... 29
Selecting the Source........................................ 30
Editing the Input Source Names ...................... 31
Product Guide .................................................. 32
Symbol
Press
Note
One-Touch
Button
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
Power Cord
Program CD
Cover-Bottom
Cleaning Cloth
•
Owner’s Instructions
•
Warranty card
•
Safety Guide
•
Registration Cards
➣
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
Installing the Wall Mount kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others if you elect to
install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
➣
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
1
2
3
4
5
6
8
78
Front Panel buttons
Touch each button to
operate.
➣
The product colour and shape may vary depending on the model.
5
SOURCE
Power Indicator
1
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3,
HDMI4). In the on-screen menu, use this button
as you use the ENtER button on the remote
control.
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
7
POWER
Press to turn the TV on and off.
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
MENU
2
3
Press to see an on-screen menu of your TV’s
features.
Speakers
8
- VOL +
Press to decrease or increase the volume.
In the on-screen menu, use the - VOL + buttons
as you use the ◄ and ► buttons on the remote
control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the
the remote control.
▼
and
▲
buttons on
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
English - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
[Side Panel Jacks]
1
2
3
4
5
3
6
7
8
Power Input
@
!
0
9
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
PC IN [PC] / [AUDIO]
-
Connect to the video and audio output jack on your PC.
2
Connecting External A/V Devices (AV IN 1)
-
-
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
3
hDMI IN 1, hDMI IN ꢀ, hDMI IN ꢁ, hDMI IN ꢂ
-
-
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
-
What is HDMI?
“High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio.
-
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
➣
The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected.
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the
HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of
the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not
1.3 may cause annoying flicker or no screen display.
English - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
DVI IN(hDMIꢀ) [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
-
➣
480i
480p
576i
576p
720p
1080i
1080p
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
X
O
X
O
O
X
X
O
O
X
O
O
O
O
O
O
O
O
O
O
4
5
ANt IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
SERVICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
6
7
WISELINk
-
Connect a USB mass storage device to view movies and photos and listen to music files.
S-VIDEO or VIDEO / R-AUDIO-L
-
-
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out
connectors on the A/V device.
8
9
0
hEADPhONES JACk
-
-
Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
AUDIO OUt [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theatre.
COMPONENt IN 1,ꢀ
-
-
-
-
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your
set and the other ends to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("PR", "PB", "Y") on your set.
The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
!
@
LAN
-
-
Connect a LAN cable to this port to connect to the Network.
kensington Lock (depending on the model)
The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
-
-
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the kensington lock may be different depending on its model.
English - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
1
2
Television Standby button
*
Displays the main on-
screen menu
Selects the TV mode
directly
(
This function enables you
to view and play photo
and music files from an
external device.
3
4
5
Number buttons for direct
channel access
One/Two-digit channel
selection
)
a
Returns to the previous
menu
+ : Volume increase
Control the cursor in
the menu. Use wheel
button in the Content
Library,WISELINK Pro,
Product Guide menus.
– : Volume decrease
Available source selection
6
7
It display "Channel List"
on the screen.
8
9
0
Use to quickly select
frequently used functions.
b
c
d
e
Exit the on-screen menu
Picture effect selection
Picture size selection
Use to see information on
the current broadcast
Selects the HDMI mode
directly.
Colour buttons :
Use these buttons in
the Channel list and
WISELINK, etc.
f
This function enables you
to view “Content Library”.
@
#
Press to select the optional
display and sound modes
for sports, cinema and
games.
teletext Functions
2 Exit from the teletext
display
Use these buttons in
the DMA, WISELINK
6 Teletext mode selection
+
and Anynet . (
: This
(LIST/FLOF)
remote can be used
7 Teletext store
to control recording on
Samsung recorders with
8 Teletext size selection
9 Teletext reveal
+
the Anynet feature)
$
Press to backlight the
0 Fastext topic selection
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
! Alternately select Teletext,
Double, or Mix.
% Teletext sub page
& P
: Teletext next page
ON/OFF
light button
P
:
Teletext previous
page
set to On will reduce the
battery usage time.)
* Teletext index
) Teletext hold
b Teletext cancel
%
^
Previous channel
Temporary sound switch-
off
&
P
P
: Next channel
: Previous channel
➣
The performance of the remote control may be affected by bright light.
English - ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
ꢀ. Install two AAA size batteries.
➣
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
ꢁ. Replace the cover.
➣
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
Using the remote control with the ON/OFF
reduce the battery usage time.
➣
light button set to On will
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
the mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣
The standby indicator lights up on your set.
ꢀ. Press the P button on your set.
➣
➣
You also can press the POWERP button or the tV button on the remote control to turn the TV
on.
The programme that you were watching last is reselected automatically.
ꢁ. Press the numeric button (0~9) or channel up/down (
/
) button on the remote control or
button on your set.
➣
When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
ꢂ. To switch your set off, press the POWERP button again.
Placing Your television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. the standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWERP button on the remote control.
➣
The screen is turned off and a red standby indicator appears on your set.
ꢀ. To switch your set back on, simply press the POWERP, numeric buttons (0~9), tV button or channel
up/down ( ) button again.
/
➣
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
English - ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Menus
1. With the power on, press the MENU button.
tV
Picture
: Standard
Mode
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input.
backlight
Contrast
brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂ0
ꢃ0
ꢃ0
Rꢃ0
ꢀ. Press the ▲ or ▼ button to select one of the icons.
Then press the ENtER button to access the icon’s sub-menu.
ꢁ. Press the EXIt button to exit.
tint
Gꢃ0
Detailed Settings
sMore
➣
The on-screen menus disappear from the screen after about
one minute.
Move
Enter
Return
Using the tOOLS button
You can use the tOOLS button to select your frequently
used functions quickly and easily. the “tools” menu change
depending on which external input mode you are viewing.
tools
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
:
:
:
:
:
:
Standard
Custom
Off
Off
Off
1. Press the tOOLS button.
SRS tS Xt
Energy Saving
Dual l-ll
The “Tools” menu will appear.
ꢀ. Press the ▲ or ▼ button to select a menu.
Mono
ꢁ. Press the ▲/▼/◄/►/ENtER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Move
Enter
Exit
♦
♦
♦
♦
♦
♦
♦
♦
♦
Anynet+ (HDMI-CEC), see page 62
Picture Mode, see page 15
Sound Mode, see page 21
Sleep Timer, see page 23
SRS TS XT, see page 21
Energy Saving, see page 26
Dual l-ll, see page 22
PIP, see page 20
Auto Adjustment, see page 34
English - ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
Plug & Play
Start Plug & Play.
Ok
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
ꢀ. Select the appropriate language by pressing the
Press the ENtER button to confirm your choice.
ꢁ. Press the or button to select “Store Demo” or “Home Use”,
then the ENtER button.
▲
or
▼
button.
Enter
◄
►
➣
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
➣
➣
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
ꢂ. The message "Check antenna input." is displayed with "OK" selected.
Press the ENtER button.
➣
Please check that the antenna cable is connected correctly.
ꢃ. Select the appropriate area by pressing the or button.
Press the ENtER button to confirm your choice.
ꢄ. The "Auto Store" menu is displayed with the "Start" selected. Press the ENtER button.
▲
▼
➣
➣
➣
The channel search will start and end automatically.
Press the ENtER button at any time to interrupt the memorization process.
After all the available channels are stored, the "Clock Set" menu appears.
ꢅ. Press the ENtER button.
Select the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the
◄
or
►
button.
Set the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the
▲
or
▼
button.
➣
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
ꢆ. Press the ENtER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the ENtER button.
➣
Even if the ENtER button is not pressed, the message will automatically disappear after
several seconds.
♦
♦
♦
♦
Language: Select your language.
Area: Select your area.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to reset this feature...
Setup
tV
Plug & Play
Language
time
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
:English
Cable Network Setup
Auto Wall-Mount
Melody
Entertainment : Off
Energy Saving : Off
PIP
: Off
ꢀ. Press the ENtER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
➣
The “Plug & Play” feature is only available in the TV mode.
Move
Enter
Return
Plug & Play
Start Plug & Play.
Ok
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. however, you can sort numbers manually and clear any channels you do not wish to
watch.
Channel
Asia/W.Europe
tV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Area
:
Auto Store
Manual Store
Channel Manager
Sort
ꢀ. Press the ENtER button to select "Area".
Name
Fine tune
ꢁ. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENtER button to confirm your choice.
ꢂ. Press the ▲ or ▼ button to select "Auto Store", then press the
ENtER button.
Move
Enter
Return
ꢃ. Press the ENtER button.
➣
➣
The TV will begin memorizing all of the available channels.
Press the ENtER button at any time to interrupt the memorization process and return to the
"Channel" menu.
ꢄ. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store television channels, including those received via
cable networks.
Channel
Asia/W.Europe
tV
Area
:
Auto Store
Manual Store
When storing channels manually, you can choose:
Channel Manager
Sort
♦
♦
Whether or not to store each of the channels found.
Name
Fine tune
The programme number of each stored channel which you wish
to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Move
Enter
Return
tV
Manual Store
: P ꢀ
ꢀ. Press the ▲ or ▼ button to select "Manual Store", then press
Programme
the ENtER button.
Colour System : Auto
Sound System : bG
ꢁ. Select the required option by pressing the ▲ or ▼ button, then
Channel
Search
Store
: C ꢁ
: ꢅꢅ Mhz
: ?
press the ENtER button.
ꢂ. When you are satisfied with your setting, press the
ENtER button.
ꢃ. Press the EXIt button to exit.
Move
Enter
Return
♦
Programme (Programme number to be assigned to a channel)
Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NtSCꢂ.ꢂꢁ/NtSCꢁ.ꢃꢆ
Press the ▲ or ▼ button to select the required colour standard.
Sound System: bG/Dk/I/M
Press the ▲ or ▼ button to select the required sound standard.
ꢀChannel (When you know the number of the channel to be stored)
-
➣
♦
♦
♦
-
-
-
-
Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
Press the ► button, then press the ▲ or ▼ button to select the required number.
➣
➣
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
♦
Search (When you do not know the channel numbers)
-
-
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
♦
Store (When you store the channel and associated programme number)
-
Set to "OK" by pressing the ENtER button.
➣
Channel mode
-
ꢀP (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
-
-
ꢀC (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
Channel
Asia/W.Europe
tV
channels.
Area
:
Auto Store
Manual Store
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Channel Manager
Sort
Name
Fine tune
ꢀ. Press the ▲ or ▼ button to select "Channel Manager", then
press the ENtER button.
Move
Enter
Return
♦
Adding channels
Using the Channel List, you can add channels.
Channel Manager
Channel List
tV
Child Lock
: Off
ꢁ. Select Channel List by pressing the ENtER button.
ꢂ. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENtER button to add the channel.
➣
If you press the ENtER button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
Move
Enter
Return
➣
“
” is active when "Child Lock" is selected to "On".
Channel List
♦
Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
P
1
Cꢁ
1 / 10
Prog.
0
1
ꢀ
ꢁ
ꢂ
ꢃ
C--
ꢃ. Press the ▲ or ▼ button to select "Child Lock", then press the
ENtER button.
ꢄ. Select "On" by pressing the ▲ or ▼ button, then press the
ENtER button.
ꢅ. Press the ▲ or ▼ button to select "Channel List", then press
Cꢁ
bbC 1
Cꢅꢂ
Cꢅꢃ
Cꢅꢄ
the ENtER button.
ꢄ
ꢅ
ꢆ
Sꢁ
Sꢂ
Sꢄ
ꢆ. Move to the ( ) field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENtER
button.
9
Sꢅ
➣
If you press the ENtER button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
Add
Lock
Move
Page
Enter
➣
A blue screen is displayed when "Child Lock" is activated.
Return
9. Press the EXIt button to exit.
➣
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active
or inactive.
You can select these options by simply pressing the Ch LISt
button on the remote control.
English - 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
this operation allows you to change the programme numbers
tV
Channel
Asia/W.Europe
of the stored channels.
Area
:
Auto Store
Manual Store
this operation may be necessary after using the auto store.
Channel Manager
Sort
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Name
Fine tune
ꢀ. Press the ▲ or ▼ button to select "Sort", then press the
ENtER button.
Move
Enter
Return
ꢁ. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
tV
Sort
Prog.
Ch.
Name
Press the ENtER button.
0
1
ꢀ
ꢁ
ꢂ
C--
Cꢀꢁ
C1ꢄ
Cꢁ
S1
➣
The selected channel number and name are moved to right
side.
ꢂ. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
s
ꢃ. Press the ENtER button. The channel is moved to its new
Move
Enter
Return
position and all other channels are shifted accordingly.
ꢄ. Repeat steps ꢁ to ꢃ for another channel to be sorted.
ꢅ. Press the EXIt button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. these names can be changed,
allowing you to assign new names.
tV
Channel
Area
:
Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Name
Fine tune
ꢀ. Press the ▲ or ▼ button to select "Name", then press the
Move
Enter
Name
Name
Return
ENtER button.
tV
ꢁ. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENtER
button
Prog.
Ch.
0
1
ꢀ
ꢁ
ꢂ
C--
Cꢀꢁ
C1ꢄ
Cꢁ
S1
-----
-----
-----
-----
-----
➣
The selection bar is displayed around the name box.
to... then...
Select a letter, number or symbol Press the ▲ or ▼ button
ꢂ.
s
Move on the next letter
Move back the previous letter
Confirm the name
Press the ► button
Press the ◄ button
Move
Enter
Return
Press the ENtER button
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
characters (+, -, *, /, space)
ꢃ. Repeat steps ꢁ to ꢂ for each channel to be assigned to a new name.
ꢄ. Press the EXIt button to exit.
English - 1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
tV
Channel
Asia/W.Europe
Area
:
Auto Store
Manual Store
1. Use the number buttons to directly select the channel that
Channel Manager
Sort
you want to fine tune.
Name
Fine tune
ꢀ. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER button.
Move
Enter
Return
ꢁ. Press the ▲ or ▼ button to select "Fine Tune", then press
Fine tune
the ENtER button.
ꢂ. Press the ◄ or ► button to adjust the fine tuning.
Press the ENtER button.
P 1
ꢃ. Press the EXIt button to exit.
0
➣
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the ENtER button.
Reset
Adjust
Save
Return
➣
English - 1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
tV
Picture
: Standard
Mode
backlight
Contrast
brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂ0
ꢃ0
ꢃ0
Rꢃ0
1. Press the MENU button to display the menu.
Press the ENtER button, to select "Picture".
ꢀ. Press the ENtER button again, to select "Mode".
ꢁ. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENtER button.
tint
Gꢃ0
Detailed Settings
sMore
Move
Enter
Picture
Return
ꢂ. Press the EXIt button to exit.
tV
♦
♦
♦
Dynamic: Selects the picture for high-definition in a bright
Dynamic
Mode
:
Standard
Movie
backlight
Contrast
brightness
Sharpness
Colour
9ꢃ
ꢂ0
ꢃ0
ꢃ0
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a dark
room.
tint
Gꢃ0
Rꢃ0
Detailed Settings
sMore
➣
The Picture mode must be adjusted separately for each input
source.
Move
Enter
Return
You can also press the P.MODE button on the remote control to
select one of the picture settings.
Easy Setting
tools
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Picture Mode”.
ꢁ. Press the ◄ or ► button to select the desired picture mode.
ꢂ. Press the EXIt or tOOLS button to exit.
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
◄
:
:
Standard
Custom
Off
►
SRS tS Xt
:
Off
Energy Saving
Dual l-ll
:
:
Off
Mono
Move
Adjust
Exit
English - 1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Custom Picture
Your set has several settings which allow you to control picture
quality.
tV
Picture
: Standard
Mode
backlight
Contrast
brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂ0
ꢃ0
ꢃ0
Rꢃ0
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
ꢀ. Press the ▲ or ▼ button to select a particular item. Press the
tint
Gꢃ0
ENtER button.
Detailed Settings
sMore
ꢁ. Press the ◄ or ► button to decrease or increase the value of a
Move
Enter
Return
particular item. Press theENtER button.
ꢂ. Press the EXIt button to exit.
▲
backlight
ꢅ
♦
♦
backlight: Adjusts the screen brightness by adjusting the LCD
▼
backlight brightness. (0~10)
Move
Adjust
Return
Contrast: Adjusts the lightness and darkness between objects
and the background.
♦
♦
brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull.
♦
♦
Colour: Adjusts the colours, making them lighter or darker.
tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
➣
➣
➣
➣
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
➣
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and then this will reduce the overall running cost.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
tV
Picture
: Standard
Mode
1. Press the MENU button to display the menu.
backlight
Contrast
brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂ0
ꢃ0
ꢃ0
Rꢃ0
Press the ENtER button, to select "Picture".
ꢀ. Press the ENtER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Detailed Settings", then press
the ENtER button.
ꢂ. Select the required option by pressing the ▲ or ▼ button, then
tint
Gꢃ0
Detailed Settings
sMore
Move
Enter
Return
tV
Detailed Settings
black Adjust : Off
Dynamic Contrast : Medium
press the ENtER button.
Gamma
: 0
: Native
ꢃ. When you are satisfied with your setting, press the ENtER
Colour Space
White balance
Flesh tone
Edge Enhancement : Off
xvYCC
button.
ꢄ. Press the EXIt button to exit.
: 0
➣
➣
"Detailed Settings" is available in "Standard" or "Movie" mode.
: Off
In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed
Settings” items.
Move
Enter
Return
♦
♦
black Adjust: Off/Low/Medium/high
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/high
You can adjust the screen contrast so that the optimal contrast is provided.
English - 1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
♦
Gamma: -ꢁ ~ +ꢁ
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of “Red”, “Green” and “Blue” Colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on
programme sources.
♦ Native: Native Colour Space offers deep and rich colour tone.
♦ Custom: Adjusts the colour range to suit your preference.
➣
Customizing the Colour Space
Colour: Red/Green/blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENtER
button.
Red/Green/blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the ENtER
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENtER button.
Reset: Resets the colour space to the default values.
button.
♦
♦
White balance: R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/b-Offset/R-Gain/G-Gain/b-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENtER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh tone: -1ꢃ ~ +1ꢃ
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➣
Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
Changing the adjustment value will refresh the adjusted screen.
♦
♦
xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➣
➣
Only available in "HDMI" and "Component" on "Movie" mode.
If xvYCC function is active, PIP cannot be selected.
English - 1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Picture Option
1. Press the MENU button to display the menu.
tV
Picture
: Ok
More
Picture Options
Reset
Press the ENtER button, to select "Picture".
ꢀ. Press the ▲ or ▼ button to select "Picture Options", then press
the ENtER button.
ꢁ. Select the required option by pressing the ▲ or ▼ button, then
press the ENtER button.
ꢂ. When you are satisfied with your setting, press the ENtER
Move
Enter
Return
button.
tV
Picture Options
ꢃ. Press the EXIt button to exit.
Colour tone
: Normal
: 1ꢄ:9
➣
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
Size
Digital NR
DNIe
: Auto
: Off
hDMI black Level : Normal
1ꢀ0hz Motion Plus : Off
blue Only Mode : Off
♦
♦
Colour tone: Coolꢀ/Cool1/Normal/Warm1/Warmꢀ
You can select the most comfortable colour tone to your eyes.
Move
Enter
Return
➣
The adjusted values are stored according to the selected
"Picture" mode.
➣ When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
Size: 1ꢄ:9/Wide Zoom/Zoom/ꢂ:ꢁ/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦
♦
♦
♦
♦
1ꢄ:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
ꢂ:ꢁ: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
➣
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
➣
➣
➣
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENtER button.
"Zoom": Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting
vertical direction.
, use the ▲ or ▼ button to magnify or reduce the picture size in the
➣
➣
When Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in hDMI (10ꢆ0i/10ꢆ0p) or Component (10ꢆ0i/10ꢆ0p) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENtER button.
You can initialize the setting.
➣
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left
and right as in the overscan function.
You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
♦
Digital NR: Off/Low/Medium/high/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
➣
When the signal is weak, select one of the other options until the best picture is displayed.
DNIe: Off/ Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can
view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied
DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view
the difference in the visual quality.
™
➣
DNIe (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
™
brighter, clearer, more detailed image to you. DNIe technology will fit every signal into your
eyes.
➣
This function is not available in "Movie" and "Standard" mode.
♦
♦
hDMI black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
➣
This function is active only when the external input connects to HDMI(RGB signals).
1ꢀ0hz Motion Plus: Off/Low/Medium/high/Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
➣
➣
This function is not available in PC mode.
If you enable "120Hz Motion Plus", noise may appear on the screen.
If this occurs, set "120Hz Motion Plus" to "Off" or select one of the other options.
♦
blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➣
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
tV
Picture
More
1. To select the desired picture effect, follow the "Changing the
Picture Options
Reset
Ok
Cancel
:
Picture Standard" instructions number 1 to 3 (On page 15).
ꢀ. Press the ▲ or ▼ button to select "Reset", then press the
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENtER button.
Move
Enter
Return
ꢂ. Press the EXIt button to exit.
➣
The "Reset" will be set for each "Picture" mode.
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
Setup
tV
Plug & Play
Language
time
:English
Cable Network Setup
Auto Wall-Mount
Melody
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
:Off
Entertainment : Off
Energy Saving : Off
PIP
ꢀ. Press the▲ or ▼ button to select "PIP", then press the
Move
Enter
Return
ENtER button.
PIP
tV
ꢁ. Press the ENtER button to select “PIP”.
Press the▲ or ▼ button to select "On", then press the
ENtER button.
PIP
: On
Source
: tV
Size
:
Position
:
ꢂ. Select the required option by pressing the ▲ or ▼ button, then
Programme
: P 1
press the ENtER button.
ꢃ. When you are satisfied with your setting, press the ENtER
Move
Return
button.
Enter
ꢄ. Press the EXIt button to exit.
➣
You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a game
or karaoke.
Easy Setting
tools
1. Press the tOOLS button on the remote control.
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
ꢀ. Press the ▲ or ▼ button to select “PIP”, then press the
:
:
:
:
:
Standard
Custom
Off
Off
Off
ENtER button.
ꢁ. Press the ◄ or ► button to select the “On”.
ꢂ. Press the ▲ or ▼ button to select a particular item.
ꢃ. Press the ◄ or ► button to select the required option.
ꢄ. Press the EXIt or tOOLS button to exit.
Energy Saving
PIP
Move
Enter
PIP
Exit
♦
PIP: On/Off
You can activate or deactivate the PIP function.
PIP
:
:
:
:
:
◄
On
tV
P 1
►
Source
Programme
Size
Main picture
Component 1, 2
HDMI 1, 2, 3, 4
PC
Sub picture
Position
TV, AV1, AV2
TV, AV1, AV2
TV, AV1, AV2
Move
Adjust
Return
♦
♦
Source
You can select a source of the sub-picture.
Size:
You can select a size of the sub-picture.
If main picture is in "HDMI" mode, "Size" is available.
/
/
➣
♦
♦
Position:
You can select a position of the sub-picture.
In Double ( ) mode, "Position" cannot be selected.
/
/
/
➣
,
Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV".
English - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Features
tV
1. Press the MENU button to display the menu. Press the ▲ or ▼
Sound
Mode
Equalizer
SRS tS Xt
Auto Volume
tV Speaker
Sound Select
: Custom
button to select "Sound", then press the ENtER button.
ꢀ. Select the required option by pressing the ▲ or ▼ button, then
: Off
: Off
: On
press the ENtER button.
ꢁ. When you are satisfied with your setting, press the ENtER
: Main
button.
ꢂ. Press the EXIt button to exit.
Move
Enter
Return
tools
♦
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when
watching a given broadcast.
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
:
◄
:
Standard
Custom
Off
►
Easy Setting
SRS tS Xt
Energy Saving
Dual l-ll
:
:
:
Off
Off
Mono
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select "Sound Mode".
ꢁ. Press the ◄ or ► button to select the desired sound mode.
ꢂ. Press the EXIt or tOOLS button to exit.
Move
Adjust
Exit
tV
Equalizer
♦
♦
Equalizer: balance/100hz/ꢁ00hz/1khz/ꢁkhz/10khz
The sound settings can be adjusted to suit your personal
preferences.
➣
If you make any changes to these settings, the sound mode
is automatically switched to "Custom".
balance 100hz ꢁ00hz 1khz ꢁkhz 10khz
Move
Adjust
Return
SRS tS Xt: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
tools
Easy Setting
Anynet+ (hDMI-CEC)
1. Press the tOOLS button on the remote control.
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
:
:
:
◄
:
Standard
Custom
Off
Off
Off
ꢀ. Press the ▲ or ▼ button to select “SRS TS XT”.
ꢁ. Press the ◄ or ► button to select the "Off" or "On".
ꢂ. Press the EXIt or tOOLS button to exit.
►
:
Mono
Move
Adjust
Exit
truSurround Xt, SRS and
Symbol are trademarks of SRS Labs, Inc.
truSurround Xt technology is incorporated under license from SRS Labs,
Inc.
♦
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
English - ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
♦
tV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣
➣
The - VOL + and MUtE buttons do not operate when the "TV Speaker" is set to Off.
When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
tools
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
:
:
:
:
:
◄
Standard
Custom
Off
Off
Off
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Dual I-II".
ꢁ. Press the ◄ or ► button to select required option.
ꢂ. Press the ENtER button.
Mono
►
Move
Adjust
Exit
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual 1/2
MONO
Default
Automatic
change
A2
STEREO
↔
DUAL 1 ↔ DUAL
MONO
MONO
Stereo
2
DUAL 1
Automatic
change
NICAM
Stereo
MONO
MONO
DUAL
↔
↔
STEREO
DUAL
2
1
Dual
DUAL 1
➣
➣
➣
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Connecting headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
TV Side Panel
➣
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
➣
Prolonged use of headphones at a high volume may damage your
hearing.
➣
➣
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current time
You can set the tV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
Setup
tV
Plug & Play
Language
time
:English
Cable Network Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Auto Wall-Mount
Melody
: Off
Entertainment : Off
Energy Saving : Off
PIP
Move
Enter
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
Return
ENtER button.
ꢁ. Press the ENtER button to select "Clock Set".
Clock Set
tV
ꢂ.
Month
p
Day
Year
ꢀ00ꢆ
to...
Press the....
01
01
Move to "Month", "Day", "Year",
"Hour", "Minute" or "am/pm"
◄ or ► button.
q
hour
Minute am/pm
1ꢀ
00
am
Set the "Month", "Day", "Year", "Hour", ▲ or ▼ button.
"Minute" or "am/pm"
Move
Adjust
Return
Confirm the setting
ENtER button
ꢃ. Press the EXIt button to exit.
➣
➣
The current time will appear every time you press the INFO button.
You can also set "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons on the
remote control.
➣
If you disconnect the power cord, you have to set the clock again.
Setting the Sleep timer
You can select a time period of between ꢁ0 and 1ꢆ0 minutes
after which the television automatically switches to standby
mode.
Mode
: Custom
Setup
tV
Plug & Play
Language
time
:English
Cable Network Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Auto Wall-Mount
Melody
: Off
Entertainment : Off
Energy Saving : Off
PIP
Move
Enter
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
ENtER button.
Return
ꢁ. Press the ▲ or ▼ button to select "Sleep Timer", then press
tV
time
the ENtER button.
Clock Set
Sleep timer
timer 1
timer ꢀ
timer ꢁ
: 1ꢀ:00 am
:
:
:
:
Off
ꢁ0
ꢄ0
ꢂ. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENtER button.
90
1ꢀ0
1ꢃ0
1ꢆ0
ꢃ. Press the EXIt button to exit.
➣
The TV automatically switches to standby mode when the
timer reaches 0.
Move
Enter
Return
tools
Easy Setting
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Sleep Timer”.
ꢁ. Press the ◄ or ► button to select the minute.
ꢂ. Press the EXIt or tOOLS button to exit.
:
:
◄
:
Standard
Custom
Off
►
SRS tS Xt
Energy Saving
Dual l-ll
Off
Off
Mono
:
:
Move
Adjust
Exit
English - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the television On and Off Automatically
Setup
tV
1. Press the MENU button to display the menu.
Plug & Play
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Language
:English
time
Cable Network Setup
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
Auto Wall-Mount
Melody
: Off
ENtER button.
Entertainment : Off
Energy Saving : Off
PIP
ꢁ. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENtER button.
Move
Enter
timer 1
Return
Three different On/Off Timer Settings can be made.
➣ You must set the clock first.
ꢂ. Press the ◄ or ► button to select the required item below.
tV
On time
5
1ꢀ
6
:
00 am
Inactivate
Press the ▲ or ▼ button to adjust to the setting satisfied.
Off time
:
1ꢀ
00 am
Inactivate
Programme
1
♦
On time : Select hour, minute, am/pm and "Activate"/
"Inactivate". (To activate timer with the setting satisfied, set to
"Activate".)
Volume
10
Repeat
Once
♦
Off time : Select hour, minute, am/pm and "Activate"/
"Inactivate". (To activate timer with the setting satisfied, set to
"Activate".)
►
Move
Adjust
Return
♦
♦
♦
Volume : Select the desired turn on volume level.
Programme : When the On Timer is active, you can turn on a specific channel.
Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".
➣
➣
You can set the hour and minute directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Setup
tV
Plug & Play
Language
time
:English
Cable Network Setup
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Auto Wall-Mount
Melody
: Off
Entertainment : Off
Energy Saving : Off
PIP
ꢀ. Press the ▲ or ▼ button to select "Language", then press
the ENtER button.
Move
Enter
Return
ꢁ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENtER button.
ꢂ. Press the EXIt button to exit.
English - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
od
: Cso
Setup
tV
Plug & Play
Language
time
:English
Cable Network Setup
ꢀ. Select the required option by pressing the ▲ or ▼ button, then
Auto Wall-Mount
Melody
:Off
press the ENtER button.
Entertainment : Off
Energy Saving : Off
PIP
ꢁ. When you are satisfied with your setting, press the ENtER
Move
Enter
button.
Return
ꢂ. Press the EXIt button to exit.
♦
Melody: Off/Low/Medium/high
The TV power on/off melody sound can be adjusted.
➣
the Melody does not play
− When no sound is output from the TV because the MUtE button has been pressed.
− When no sound is output from the TV because the (Volume) button has been pressed.
− When the TV is turned off by the Sleep Timer function.
Entertainment: Off/Sports/Cinema/Game
-
♦
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
− Off: Switch the "Entertainment" function off.
− Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
colour and sound.
− Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
− Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➣
➣
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be
adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode
must be turned off.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” and “Equalizer” function is
not available.
➣
➣
The “Entertainment” settings are saved for each input source.
This function is not available in PC mode.
You can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
Energy Saving: Off/Low/Medium/high/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− high: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Energy Saving”.
tools
ꢁ. Press the ◄ or ► button to select the "Off", "Low",
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
:
:
:
:
◄
:
Standard
Custom
Off
Off
Off
"Medium", "High" or "Auto".
ꢂ. Press the EXIt or tOOLS button to exit.
►
Mono
Move
Adjust
Exit
English - ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Connection
LAN Connection for a DhCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described
below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is
selected, you do not have to enter them manually.
tV Rear Panel
the Modem Port
on the Wall
External Modem
(ADSL/VDSL/Cable tV)
LAN
Cable
1
ꢀ
Modem Cable
1. Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable.
2. Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router).
IP Sharer
tV Rear Panel
External Modem
(ADSL/VDSL/
Cable tV)
LAN Cable
LAN Cable
the Modem
Port on the Wall
Modem Cable
➣
➣
➣
➣
The terminals (the position of the port and the type) of the external device may differ depending on the
manufacturer.
If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on
again after at least 10 seconds and then try again.
For the connections between the external modem and the Sharer (Router), refer to the owner’s
manual of the corresponding product.
You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have
to use an automatic-connection-type ADSL modem.
English - ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manu-
ally enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service
Provider (ISP).
You can connect the LAN via a Sharer (Router).
tV Rear Panel
the LAN Port
on the Wall
IP Sharer
LAN
Cable
LAN Cable
1. Connect the [LAN] port on the rear panel of the TV and the IP Sharer with a LAN Cable.
2. Connect the LAN port on the wall and the IP Sharer with a LAN Cable.
➣
The terminals (the position of the port and the type) of the external device may differ depending on
the manufacturer.
➣
If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway,
and DNS. You must enter these values to complete the network settings. If you do not know the
values, ask your network administrator.
➣
➣
➣
For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual
for the corresponding product.
If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or
static IP.
For the procedures to use a static IP address, ask your Internet Service Provider.
English - ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Network Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
E
Setup
tV
Plug & Play
Language
time
ENtER
button.
:English
2. Press the ▲ or ▼ button to select “Cable Network Setup”,
Cable Network Setup
E
then press the ENtER
button.
Auto Wall-Mount
Melody
: Off
Entertainment : Off
Energy Saving : Off
PIP
➣
Please check if the LAN cable is connected.
Move
Enter
Return
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet
Protocol (IP) Settings are automatically configured. (refer to page
27)
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network test
E
3. Press the ENtER
button to select “Internet Protocol
IP Address
Subnet Mask
Gateway
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Setup”.
0
0
4. Press the ▲ or ▼ button to select “Auto Setup”, then press
E
the ENtER
DNS Server
button.
0
0
Move
Enter
Return
➣
➣
The Internet Protocol is set automatically.
Select “Network Test” to check the network connectivity.
Manual Setup
Cable Network Setup
To connect the TV to the LAN using a static IP address, you must
set up the Internet Protocol (IP). Please check if the LAN cable is
connected. (refer to page 28)
Internet Protocol Setup : Manual Setup
Network test
E
3. Press the ENtER
button to select “Internet Protocol
IP Address
Subnet Mask
Gateway
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Setup”.
0
0
4. Press the ▲ or ▼ button to select “Manual Setup”, then
DNS Server
E
0
0
press the ENtER
button.
Move
0 ~ 9 Number
Enter
Return
5. Press the ▲, ▼, ◄ or ►button to move to an item, and
press the numeric button to configure the selected item.
E
Press the ENtER
button.
➣
Select “Network Test” to check the network connectivity.
Network test
You can test or confirm the network connection status after setting
up the network.
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network test
3. Press the ▲ or ▼ button to select “Network Test”, then press
E
the ENtER
button.
IP Address
Subnet Mask
Gateway
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
➣
The current network settings will appear.
4. Press the EXIt button to exit.
DNS Server
0
0
Move
Enter
Return
English - ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
When unable to connect to a wired network
•
If your Internet service provider has registered the MAC address of the device used to connect to the
Internet for the first time and authenticates the MAC address each time you connect to the Internet,
your TV may not be able to connect to the Internet as the MAC address differs from that of the device
(PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about
the procedures to connect devices other than your PC (such as your TV) to the Internet.
•
If your Internet service provider requires an ID or password to connect to the Internet (network), your
TV may not be able to connect to the Internet. In this case, you have to enter your ID or password
when connecting to the Internet using an Internet Sharer (Router).
•
•
The internet connection may fail due to a firewall problem. In this case, contact your Internet service
provider.
If you cannot connect to the Internet even if you have followed the procedures of your Internet service
provider, please contact a Samsung Electronics Service Center.
Selecting the Source
Mode
: Custom
Input
You can select among external sources connected to your tV’s
tV
input jacks.
Source List
Edit Name
: tV
Anynet+(hDMI-CEC)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENtER button.
WIESLINk Pro (USb/DLNA)
Content Library
Product Guide
ꢀ. Press the ENtER button again, to select "Source List".
Enter
Return
➣
When no external device is connected to your set, only "TV"
is activated in the "Source List". "AV1", "AV2",
"S-Video", "Component1", "Component2", "PC", "HDMI1",
"HDMI2", "HDMI3", "HDMI4" are activated only when they
are connected to your set.
Move
Source List
tV
tV
AV1
AVꢀ
: ----
: ----
S-Video
: ----
: ----
: ----
: ----
ꢁ. Select the required device by pressing the ▲ or ▼ button.
Component1
Componentꢀ
PC
Press the ENtER button.
sMore
Enter
Return
Move
Press the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the tV button,
number buttons(0~9), and the P
/
button on the remote
control. You can also watch HDMI mode simply by pressing
the hDMI button on the remote control.
English - ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing the Input Source Names
Mode
: Custom
Input
Name the device connected to the input jacks to make your
tV
input source selection easier.
Source List
Edit Name
: tV
Anynet+(hDMI-CEC)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENtER button.
WIESLINk Pro (USb/DLNA)
Content Library
Product Guide
ꢀ. Press the ▲ or ▼ button to select "Edit Name", then press the
Enter
Return
ENtER button.
Move
ꢁ. Press the ▲ or ▼ button to select the device that you wish to
Mode
: Custom
Edit Name
edit.
tV
AV1
AVꢀ
: ---
----
Press the ENtER button.
:
VCR
DVD
ꢂ. Press the ▲ or ▼ button to select the required device.
S-Video
:
Cable Stb
Component1
:
Press the ENtER button.
Satellite Stb
Componentꢀ
PC
:
:
AV Receiver
:
PVR Stb
ꢃ. Press the EXIt button to exit.
hDMI1
s
➣
When a PC with a resolution of 1920 x 1080@60Hz is
connected to the HDMI IN 2 port, you should set the
"HDMI2" mode to "PC" in the "Edit Name" of the "Input"
mode.
sMore
Enter
Return
Move
English - ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Guide
The Product Guide gives you information on the most important features of this TV.
1. Press the MENU button to display the menu. Press the ▲ or ▼
Input
tV
E
button to select “Input”, then press the ENtER
button.
Source List
Edit Name
: tV
ꢀ. Press the ▲ or ▼ button to select “Product Guide”, then press
Anynet+(hDMI-CEC)
WIESLINk Pro (USb/DLNA)
Content Library
E
the ENtER
button.
Product Guide
Move
Enter
Return
ꢁ. Press the ◄ or ► button to select a Guide (“Picture Quality”,
E
“Entertainment” or “Connectivity”) and press the ENtER
button.
ꢂ. You can navigate the Product Guide screen by using the ◄ and ► buttons.
Picture Quality
Entertainment
Connectivity
Full HD 1080p
120Hz Motion Plus
Content Library
Entertainment Mode
WISELINK Pro
DLNA
4HDMI
Anynet+
ꢃ. Press the EXIt button to exit.
Using the Remote Control button in Product Guide Menu
button
Operations
Yellow Button
Wheel (◄/►)
Shows the contents of the Product Guide sequentially. (AutoPlay)
Move the cursor and select an item.
E
ENtER
Select the currently selected item.
REtURN
Return to the previous menu.
EXIt
Stop the current function and return to the “Product Guide” main menu.
English - ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (based on Windows XP)
the Windows display-settings for a typical computer are shown below. the
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual screens
look different, the same, basic set-up information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
ꢀ. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
ꢁ. When the control panel window appears, click on "Display" and a display
dialog-box will appear.
ꢂ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
both screen position and size will vary depending on the type of PC monitor and its resolution.
the resolutions in the table are recommended.
➣
D-Sub Input
Mode
horizontal
Vertical
Pixel Clock
Sync Polarity
Resolution
Frequency (khz) Frequency (hz) Frequency (Mhz)
(h/V)
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+ / -
- / +
IbM
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
800 x 600
VESA
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
- / -
+ / +
+ / +
+ / +
+ / +
+ / +
CVt
1920 x 1080RB
66.587
59.934
138.500
+ / -
➣
hDMI/DVI Input
horizontal
Vertical
Pixel Clock
Sync Polarity
Mode
Resolution
Frequency (khz) Frequency (hz) Frequency (Mhz)
(h/V)
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
- / -
+ / +
- / -
+ / +
+ / +
+ / +
VESA
CEA
1920 x 1080p
67.500
60.000
148.500
+ / +
➣
➣
➣
➣
➣
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes
(1920x1080 or 1600x1200).
English - ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the tV with your PC
➣
Press the SOURCE button to select PC mode.
tV
Picture
: Standard
1. Press the MENU button to display the menu.
Mode
backlight
Contrast
ꢅ
Press the ENtER button, to select "Picture".
9ꢃ
ꢂꢃ
ꢃ0
brightness
Sharpness
Auto Adjustment
Screen Adjustment
Detailed Settings
sMore
ꢀ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
ꢁ. When you are satisfied with your setting, press the ENtER
button.
ꢂ. Press the EXIt button to exit.
Move
Enter
Return
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Auto Adjustment in progress
Please wait.
Easy Setting
tools
Anynet+ (hDMI-CEC)
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Auto Adjustment”, then
:
:
:
:
:
Standard
Custom
Off
Off
Off
press the ENtER
button.
Energy Saving
PIP
Auto Adjustment
Move
Enter
Exit
♦
Screen Adjustment:
Coarse/Fine
tV
Screen Adjustment
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (coarse) and Fine-
tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Coarse
Fine
Position
ꢃ0
9ꢁ
Image Reset
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press
the ENtER
button.
Press the ◄ or ► button to adjust the screen quality.
Move
Enter
Return
Press the ENtER
button.
tV
Position
Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENtER
button.
Move
Enter
Return
ꢃ0
tV
Screen Adjustment
Image Reset
Coarse
You can replace all image settings with the factory default
values.
Fine
Position
Image Reset
9ꢁ
Move
Enter
Return
English - ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a USb Device
1. Press the POWER button on the remote control or front
tV Side Panel
panel.
➣
The TV is powered on.
2. Connect a USB device containing photo, music and/or
movie files to the WISELINK jack (USB jack) on the side
of the TV.
USb Drive
➣
If you enter the WISELINK Pro mode with no USB
device connected the message No external storage
device found. Check the connection status. will appear.
In this case, insert the USB device, exit the screen by
pressing the W.LINk button on the remote control and
enter the WISELINK Pro screen again.
➣
➣
➣
➣
MTP (Media Transfer Protocol) is not supported.
The file system only supports FAT16/32 (The NTFS file system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage
Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers
(Both USB HDD and HUB are not supported.)
➣
➣
Please connect directly to the USB port of your TV. If you are using a separate cable connection,
there may be a USB Compatibility problem.
Before connecting your device to the TV, please back up your files to prevent them from damage or
loss of data. SAMSUNG is not responsible for any data file damage or data loss.
➣
➣
➣
➣
➣
➣
➣
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
The sequential jpeg format is supported.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360x8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
If the number of photo files exceeds 4000 (or the number of music files exceeds 3000), any files
exceeding the 4000 limit may not be displayed in the Photo List (or Music List).
➣
MP3 files with DRM that have been downloaded from a non-free site cannot be played.
Digital Rights Management (DRM) is a technology that supports the creation of content, the
distribution and management of the content in an integrated and comprehensive way, including the
protection of the rights and interests of the content providers, the prevention of the illegal copying of
contents, as well as managing billings and settlements.
English - ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the WISELINk Pro Function
This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass
Storage Class (MSC) device.
Entering the WISELINk Pro Menu
851.98MB/995.00MB Free
WISELINk Pro
1. Press the MENU button. Press the ▲ or ▼ button to
SUM
E
select “Input”, then press the ENtER
button.
PHOTO
2. Press the ▲ or ▼ button to select “WISELINK Pro
E
(USB/DLNA)”, then press the ENtER
button.
➣
The “WISELINK Pro” menu is displayed.
Photo
SUM
Music
Movie
Setup
Device
e
Exit
O
Press the W.LINk button on the remote control to
display the “WISELINK Pro” menu.
3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory
E
Device (i.e. if connected through a hub). Press the ENtER
button.
This function differs depending on the USB Memory Device / DLNA device connected to TV.
The selected USB device name appears at the bottom left of the screen.
➣
➣
E
4. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENtER
button. To exit “WISELINK Pro” mode, press the W.LINk button on the remote control.
Removing a USb Memory Device Safely
You can remove the device safely from the TV.
image_1.jpg
Photo
▲
Month
: Jan
1. Press the tOOLS button in the WISELINK Pro file
list screen, or while a Slide Show, music or movie is
being played.
Play Current Group
Delete
Date
Colour
Composition :
Folder
Favourite
: Jan.01.2008
: Gray
Information
: P-other
:
★ ★ ★
Remove Safely
2. Press the ▲ or ▼ button to select “Remove Safely”,
E
then press the ENtER
button.
3. Remove the USB device from the TV.
Preference
Monthly
Timeline
Jan
Nov
▲
Device
Favourites Setting
s
Select
Jump
Option
SUM
English - ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Display
ꢀ
ꢄ
1File(s) Selected
image_1.jpg
: Jan
Photo
Month
Date
Colour
: Jan.01.2008
: Gray
Composition :
Folder
Favourite
: P-other
:
★ ★ ★
1
Preference
ꢁ
ꢅ
ꢂ
Nov
Monthly
Timeline
Jan
▲
ꢃ
Device
Favourites Settings
Select
Jump
Option
SUM
1. Currently selected file: The currently selected file is highlighted. Photo and movie files are displayed
as thumbnail images.
2. Information Window: Shows information about the currently selected file. There is a separate
information window for photo and movie files only. For music files, the file information is also
displayed in the location where the file is displayed.
3. Current Sort Standard: This field shows the current standard for sorting files. Press the ▲ or ▼
button to change the standard for sorting files.
4. View Groups: Shows the sorting groups. The sorting group including the currently selected photo is
highlighted.
5. Current Device: Shows the currently selected device name. Press the Red button to select a device.
6. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow
button.
7. Help Items
•
•
Red (Device) button: Selects a connected device.
Green (Favourites Settings) button: Changes the favourites setting for the selected file. Press
this button repeatedly until the desired value appears.
•
Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol c.
Press the yellow button again to cancel a file selection.
•
•
πµ (Jump) button: Jumps to the previous sorting group / Jumps to the next sorting group.
tOOLS (Option) button: Displays the option menus. (The option menu changes according to the
current status.)
English - ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control button in WISELINk Pro Menu
button Operations
▲/▼/◄/►/ Wheel Move the cursor and select an item.
Select the currently selected item.
While playing a slide show, movie, or music file:
E
E
ENtER
- Pressing the ENtER
button during play pauses the play.
E
- Pressing the ENtER
button during pause resumes the play.
Play or pause the Play Slide Show, Music or movie.
Return to the previous menu.
∂
/∑
REtURN
tOOLS
∫
Run various functions from the Photo, Music and Movie menus.
Stop the current slide show, Music or Movie file.
Jump to previous group / Jump to next group.
Show file information.
π
/µ
INFO
W.LINk
tV
Exit WISELINK Pro mode.
Stop WISELINK Pro mode and Returns to TV mode.
Stop the current function and return to the WISELINK Pro main menu.
EXIt
Using and Sorting Photo List
You can sort photos in the Photo List by a particular standard.
1. Press the ▲ or ▼ button to select a sorting
image_1.jpg
: Jan
Photo
standard in the Photo list.
Month
Date
Colour
: Jan.01.2008
: Gray
Composition :
➣
➣
The photos are sorted according to the newly
selected sorting standard.
Folder
: P-other
Favourite
:
★ ★ ★
To move to the previous / next group, press the
π
µ
(REW) or
∂
(FF) button.
E
2. Press the
(Play) / ENtER
button to start
Preference
the Slide Show in the order selected by the user.
Jan
Nov
Monthly
Timeline
▲
➣
➣
The information of a photo file is automatically
set.
Device
Favourites Settings
Select
Jump
Option
SUM
The “Colour” and “Composition” information
extracted from a photo file may be different
from the user’s expectations.
➣
Photo information is automatically set. You can
change the “Colour”, “Composition”, and “Favourite”.
➣
➣
Photos for which information cannot be displayed are set as “Unclassified”.
PTP does not support folder sort mode.
English - ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting Standard for the Photo List
•
Monthly
It sorts and shows photos in the file by month. It sorts only by month (from January to December)
regardless of year.
•
•
timeline
It sorts and shows photos by date. It sorts by year and month from the earliest photo.
Colour
It Sorts photos by colour. You can change the photo colour information.
➣
“Colour” options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassified.
Composition
It Sorts photos by composition. You can change the compositional information of photos.
•
➣
“Composition” options:
(horizontal),
(vertical),
(object),
(perspective),
(pattern),
Unclassified.
•
•
Folder
It Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each
folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by
name.
Preference
It Sorts photos by preference (Favourite). You can change the photo preferences.
➣
Changing the Favourites setting
Select the desired photo in the Photo list, then press the Green button repeatedly until the desired
setting appears.
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
➣
“Favourite” options:
,
,
,
Photo List Option Menu
•
Slide Show
image_1.jpg
: Jan
Photo
Month
Date
Colour
Using this menu, you can play a SlideShow using the
photo files on the USB memory device.
Slide Show
Play Current Group
Delete
: Jan.01.2008
: Gray
Composition :
Folder
Favourite
: P-other
Information
•
Play Current Group
:
★ ★ ★
▼
Using this menu, you can play a SlideShow using only
the photo files in the currently selected sorting group.
Preference
•
•
Delete
Jan
Nov
Monthly
Timeline
▲
Using this menu, you can delete the selected photo files.
Device
Favourites Settings
Select
Jump
Option
SUM
Change Group
You can change the “Colour” and “Composition” information of photo files.
➣
➣
The group information of the current file is updated and the file is moved to the new group.
To change the information of multiple files, select the files you want by pressing the yellow button.
English - ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Information
The photo file information including, the name, the size, the resolution, the date modified and the path is
displayed.
➣
You can view the information of photo files during a SlideShow using the same procedures.
O
Alternatively, select a photo from the photo list and
press the INFO button to view the information.
Remove Safely
You can remove the device safely from the TV.
Viewing a Photo or Slide Show
Viewing a Slide Show
1. Press the ◄ or ► button to select the desired
►
Normal 20/22 image_1.jpg
440x440
2.0KB
2008/1/1
photo in the Photo list.
2. Press the tOOLS button.
3. Press the ▲ or ▼ button to select “Slide Show”,
E
then press the ENtER
button.
➣
All files in the photo list will be used for the
Slide Show.
E
Pause
Previous
Next
Option
Return
SUM
➣
During the slide show, files are displayed in order
from the currently shown file.
➣
➣
The Slide Show progresses in the order sorted in the Photo list.
Music files can be automatically played during the Slide Show if the “Background Music” is set to
“On”. (Refer to page 42).
∂
➣
While a photo list is displayed, press the
ENtER
(Play)/
E
button on the remote control to start slide
show.
➣
SlideShow Control buttons
Exit Slide Show and return to the
photo list.
E
ENtER
∫
Play/Pauses the Slide Show.
Run various functions from the
Photo menus.
∂
∑
Play the Slide Show.
Pause the Slide Show.
tOOLS
Change the Slide Show playing
speed.
π µ
/
English - ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing current group
1. Press the ▲ or ▼ button to select a sorting standard.
(“Monthly”, “Timeline”, “Colour”, “Composition”, “Folder”, “Preference”)
π
µ
2. Press the
3. Press the tOOLS button.
4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENtER
Only the photos in the sorting group including the selected files will be used for the Slide Show.
(REW) or
(FF) button to select the desired group.
E
button.
➣
To perform a SlideShow with only the selected files
1. Press the ◄ or ► button to select the desired photo in the Photo list.
2. Press the yellow button. Repeat the above operation to select multiple photos.
c
➣
The
mark appears to the left of the selected photo.
➣
➣
If you select one file, the SlideShow will not be performed.
To deselect all selected files, press the tOOLS button and select “Deselect All”.
∂
E
3. Press the
(Play) / ENtER
button.
➣
The selected files will be used for the Slide Show.
Slide Show Option Menu
•
•
Stop Slide Show / Start Slide Show
Tools
Stop Slide Show
You can start or stop a SlideShow.
Rotate
Rotate
Zoom
Slide Show Speed
Background Music
:
:
Normal
Off
You can rotate photos saved on a USB memory device.
➣
➣
➣
Whenever you press the ◄ button, it rotates by
270˚, 180˚, 90˚, and 0˚.
Background Music Setting
Information
Remove Safely
Whenever you press the ► button, it rotates by 90˚,
180˚, 270˚, and 0˚.
U
Move
E
Enter
e
Exit
If you have select “Zoom”, the “Rotate” deactivated.
•
•
Zoom
You can magnify photos saved on a USB memory device. (x1 → x2 → x4)
E
➣
To move the enlarged photo image, press the ENtER
button, then press the ▲/▼/◄/►
buttons. Note that when the enlarged picture is smaller than the original screen size, the location
change function doesn’t work.
➣
The enlarged file is not saved.
Slide Show Speed
You can select the slide show speed.
➣
➣
You can select the Slide Show speed only during a slide show.
π
µ
You can also change the speed of the Slide Show by pressing the
during the Slide Show.
(REW) or
(FF) button
English - ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Background Music → On / Off
If you set “Background Music” to On, the background music will be played when viewing photos one by
one or in a Slide Show.
If you set “Background Music” to On, a screen appears immediately where you can set the Background
Music.
To use this feature, there must be music and photo files stored on the USB device.
background Music Setting
You can select background music when watching a SlideShow.
➣
If you turn off the “Background Music”, even if the “Background Music Settings” have been set up,
the background music will not be played.
➣
Loading music files is needed to change BGM mode. Play music files in music category to load.
•
•
BGM Mode → Mood / Selected File / Shuffle
BGM Mood → Energetic / Rhythmical / Sad / Exciting / Calm
➣
If you set “BGM Mode” to “Mood”, you can select a mood.
➣
You cannot select a mood not part of the music files on the USB memory device.
•
Select Music File
If you set “BGM Mode” to “Selected File”, you can select a music file.
➣
•
•
Information
The photo file information is displayed.
Remove Safely
You can remove the device safely from the TV.
Using and Sorting the Music List
You can sort music files in the Music List by a particular standard.
1. Press the ▲ or ▼ button to select a sorting
Music
standard in the Music list.
Thanks
I Love You
Darby
Better than yesterday
Catherine
➣
➣
Music files are sorted according to the newly
selected sorting standard.
Jee
Album 1
2005
Pop
Album 2
2005
Pop
Album 3
2005
Pop
To move to the previous / next group, press the
π
µ
(REW) or
(FF) button.
Energetic
★ ★ ★
Sad
H
★ ★ ★
Calm
★ ★ ★
E
2. Press the ENtER
button to start playing music
Preference
F
G
I
J
L
P
S
T
V
Title
Artist
in the order selected by the user.
▲
➣
➣
The information of the music files is
automatically set.
SUM
Device
Favorites Settings
Select
Jump
Option
The “Mood” information extracted from a music
file may differ from the expectations of the user.
➣
➣
➣
➣
Music information is automatically set. You can change the “Mood” and “Favourite”.
Music files for which information cannot be displayed are set to “Unclassified”.
If there is no title information for a music file, the filename is displayed.
If no information is available for the Genre, Artist, Album, or Year, the corresponding item is
displayed as blank.
English - ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting Standard for the Music List
•
•
•
title
It sorts the Music titles in symbol/Number/alphabet/special order, and shows the music file.
Artist
It sorts the music file by artist in symbol/Number/alphabet/special order.
Mood
It sorts music files by the mood. You can change the music mood information.
➣
“Mood” options: Energetic, Rhythmical, Sad, Exciting, Calm, Unclassified
•
•
Genre
It sorts music files by the genre.
Folder
It sorts music files by the folder. If there are many folders in USB, the files are shown in order in each
folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by
name.
•
Preference
It sorts music files by preference (Favourite). You can change the music files preferences.
➣
Changing the Favourites setting
➣
Select the desired music file in the Music list, then press the Green button repeatedly until the
desired setting appears.
➣
➣
To change the information of multiple files, select files by pressing the yellow button.
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
“Favourite” options:
,
,
,
Music List Option Menu
•
•
•
Play Current Group
Using this menu, you can only play music files in the
currently selected sorting group.
Music
Thanks
I Love You
Darby
Play Current Group
Delete
Delete
Jee
Change Group
Album 1
2005
Pop
Album 2
2005
Pop
Using this menu, you can delete the selected music
files.
Information
▼
Sad
★ ★ ★
Sad
★ ★ ★
Exciting
★ ★ ★
Change Group
Artist
Rhythmical
Device
Sad
Exciting
Calm
...
Mood
Genre
You can change the mood information of music files.
The group information of the current file is updated and
the file is moved to the new group.
▲
SUM
Favorites Settings
Select
Jump
Option
➣
To change the information of multiple files, select files by pressing the yellow button.
Information
The music file information including the name, the size, the date modified and the path is displayed.
•
•
➣
You can view the information of music files during a SlideShow using the same procedures.
O
Alternatively, select a music file from the music list
and press the INFO button to view the information.
Remove Safely
You can remove the device safely from the TV.
English - ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Music
Playing a music file
1. Pressing the ◄ or ► button to select a music file to
7/14
00:01:15
00:05:41
be played,
I Love You
∂
E
2. Press the
(Play) / ENtER
button.
➣
This menu only shows files with the MP3 file
extension. Files with other file extensions are
not displayed, even if they are saved on the
same USB device.
➣
➣
➣
➣
π
(REW) or
during play.
µ
(FF) buttons do not function
Pause
Previous
Next
Option
Return
SUM
The selected file is displayed at the top with its
playing time.
To adjust the music volume, press the volume button on the remote control. To mute the sound,
press the MUtE button on the remote control.
The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information
is not found at the start of the file.
➣
➣
Music Play Control buttons
Exit play mode and return to the
music list.
E
ENtER
∫
Play/Pauses the music file.
Run various functions from the
Music menus.
∂
∑
Play the music file
tOOLS
Pause the music file
Music function information icon
When all music files in the folder (or the selected file) are repeated. “Repeat Mode” is “On”.
When all music files in the folder (or the selected file) are played once. “Repeat Mode” is
“Off”.
Playing the music group
1. Press the ▲ or ▼ button to select a sorting standard.
(“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”)
π
µ
2. Press the
3. Press the tOOLS button.
4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENtER
The music files in the sorting group including the selected file are played.
(REW) or
(FF) button to select the desired group.
E
button.
➣
Playing the selected music files
1. Press the ◄ or ► button to select the desired music file in the music list.
2. Press the yellow button. Repeat the above operation to select multiple music files.
c
➣
The
mark appears to the left of the selected music file.
∂
E
3. Press the
(Play) / ENtER
button.
➣
Only the selected file is played.
English - ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Play Option Menu
•
•
•
Repeat Mode → On / Off
You can play music files repeatedly.
Tools
Repeat Mode
Information
◄
On
►
Information
The music file information is displayed.
Remove Safely
U
Move
L
Adjust
e
Exit
Remove Safely
You can remove the device safely from the TV.
Using and Sorting the Movie List
You can sort movies in the Movie List by a particular standard.
movie_1.jpg
: Jan.01.2008
Movie
1. Press the ▲ or ▼ button to select a sorting
Date
standard in the Movie list.
Folder
Favourite
: movie-folder
:
★ ★ ★
➣
➣
The movie files are sorted according to the
newly selected sorting standard.
To move to the previous / next group, press the
π
µ
(REW) or
∂
(FF) button.
E
Preference
Title
2. Press the
(Play) / ENtER
button to play
SYMBOL
ENG
□
A
M
the movie in the order selected by the user.
▲
Timeline
Device
Favourites Settings
Select
Jump
Option
SUM
➣
➣
The movies are sorted according to the newly
selected sorting standard.
Movie information is automatically set. You can
change the “Favorite”.
Sorting Standard for the Movie List
•
•
•
title
It sorts and displays the Movie titles in symbol/Number/alphabet/special order.
timeline
It sorts and shows movies by date. It sorts by year and month from the earliest movie.
Folder
If there are many folders in USB, the movies files are shown in order in each folder. The movie file in the
Root folder is shown first and the others are shown in alphabetical order by name.
•
Preference
It sorts movies by preference. (Favorite) You can change the movie preferences.
➣
Changing the Favourites setting
➣
Select the desired movie file in the movie list, then press the Green button repeatedly until the
desired setting appears.
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
➣
“Favourite” options:
,
,
,
English - ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie List Option Menu
•
Play Current Group
Using this menu, you can only play movie files in the
currently selected sorting group.
movie_1.jpg
: Jan.01.2008
Movie
Date
Play Current Group
Delete
Folder
Favourite
: movie-folder
:
★ ★ ★
Information
•
•
Delete
Remove Safely
Using this menu, you can delete the selected movie files.
Information
Preference
SYMBOL
ENG
The movie file information including the name, the size,
the date modified and the path is displayed.
□
A
M
Title
▲
Timeline
Device
Favourites Settings
Select
Jump
Option
SUM
O
Alternatively, select a movie file from the movie list
and press the INFO button to view the information.
•
Remove Safely
You can remove the device safely from the TV.
Playing a Movie File
Playing a movie file
1. Pressing the ◄ or ► button to select a movie to
1/5
00:00:48
00:23:05
be played,
ABC.avi
∂
E
2. Press the
(Play) / ENtER
button.
➣
The selected file is played.
➣
The selected file is displayed at the top with its
playing time.
➣
The playing duration of a movie file may be
displayed as ‘00:00:00’ if its playing time
information is not found at the start of the file.
E
SUM
Pause
-20sec
+20sec
Option
Return
➣
➣
You can watch exciting gaming multimedia fi
les, but the gaming function is not supported.
Movie doesn’t support subtitles. (for example, not support smi, srt and sub files, etc and not
support subtites included in movie files)
Manufactured under license from Dolby Laboratories. Dolby and the double-
D symbol are trademarks of Dolby Laboratories.
English - ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
➣
Supported Video Formats
Video Codec
Resolution (Max)
720 x 576
720 x 576
1920 x 1088
720 x 576
Container Type
Audio codec
Video Codec Type
XviD
Frame Rate
24/25/30
MPEG2
H.264 HP
MPEG-4 ASP
H.264 HP
MPEG-4 ASP
AC3, MPEG1 (Layer
1, 2, 3), PCM
avi
1920 x 1088
720 x 576
24/25/30
24/25/30
ADPCM (MS, IMA),
AAC LC
AC3, MPEG1 (Layer
1, 2, 3), LPCM
AC3, MPEG1 (Layer
1, 2, 3), LPCM
mp4
PS
MPEG2
MPEG2
1920 x 1088
1920 x 1088
24/25/30
24/25/30
TS
➣
Video Play Control buttons
E
Play/Pause Movie file
Play the movie file
Pause the movie file
ENtER
∂
∑
∫
Exit play mode and return to the movie list.
Run various functions from the movie menus.
tOOLS
◄ / ►/ Wheel
▲ / ▼/ Wheel
Skip forwards or backwards through the movie file in 20 second intervals.
Play the next file or the previous file.
➣
Movie function information icon
When all movie files in the folder (or the selected file) are repeated.
“Repeat Mode” is “On”.
When all movie files in the folder (or the selected file) are played once.
“Repeat Mode” is “Off”.
Playing the movie group
1. Press the ▲ or ▼ button to select a sorting standard. (“Title”, “Timeline”, “Folder”, “Preference”)
2. Press the π (REW) or µ (FF) button to select the desired group.
3. Press the tOOLS button.
4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENtER
E
button.
Playing the selected movie files
1. Press the ◄ or ► button to select the desired movie file in the movie list.
2. Press the yellow button. Repeat the above operation to select multiple music files.
➣
The cmark appears to the left of the selected movie file.
E
3. Press the ∂ (Play) / ENtER
button.
➣
Only the selected file is played.
English - ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movie continuously
If you exit playing movie, playing it continuously later is possible.
With “Play continuously” function, you can watch movie without watching again from beginning or
bothering searching.
1. Select movie file you want to play continuously by pressing ◄ or ► button from the Movie List.
E
2. Press the ∂ (Play) / ENtER
button.
3. Select play continuously by pressing Blue button.
➣
Movie will begin to play from where it was stopped being played.
➣
If “Cont. movie play help” function was set “On”, a pop-up message will appear when you play
movie file you want to play continuously. (Refer to page 49)
4. To exit “WISELINK Pro” mode, press the W.LINk button on the remote control.
Movie Play Option Menu
•
•
Repeat Mode
You can play the movie repeatedly.
Tools
Repeat Mode
Picture Size
Information
◄
On
►
Picture Size
:
Fit
–
–
Fit: Play video at the TV screen size.
Original: Play video at the original size.
Remove Safely
U
Move
L
Adjust
e
Exit
•
•
Information
The movie file information is displayed.
Remove Safely
You can remove the device safely from the TV.
English - ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting the Photo/Music/Movie File
1. Press the ◄ or ► button to select the desired file in
image_1.jpg
: Jan
Photo
the Photo/Music/Movie list.
Month
Date
Colour
Slide Show
Play Current Group
Delete
: Jan.01.2008
: Gray
Composition :
➣
To delete multiple files, select files by pressing
the yellow button.
Folder
: P-other
Information
Favourite
:
★ ★ ★
▼
2. Press the tOOLS button.
3. Press the ▲ or ▼ button to select “Delete” (or
“Delete selected File”), then press the ENtER
button.
E
Preference
Monthly
Timeline
Jan
Nov
▲
4. Press the ◄ or ► button to select “OK”, then press
Device
Favourites Settings
Select
Jump
Option
SUM
E
the ENtER
button.
➣
➣
➣
➣
➣
➣
➣
The file is deleted.
When a read-only file is deleted, the “This File is read-only file. Delete it?” message appear.
Read-only files among multiple files cannot be deleted.
If you select “Cancel”, the deletion is cancelled.
While removing files, don’t remove the USB memory device.
You cannot remove the PTP-connected digital camera picture files.
You cannot recover deleted Photo/Music/Movie files.
Using the Setup Menu
Setup displays the user settings of the WISELINK Pro
menu.
851.98MB/995.00MB Free
WISELINk Pro
SUM
1. Press the W.LINk button on the remote control to
SETUP
display the WISELINK Pro menu.
2. Press the ◄ or ► button to select “Setup”, then
E
press the ENtER
button.
3. Press the ▲ or ▼ button to select the desired
option.
Photo
SUM
Music
Movie
Setup
4. Press the ◄ or ► button to select the option, then
E
Device
e
Exit
press the ENtER
button.
➣
To exit WISELINK Pro mode, press the W.LINk
button on the remote control.
Setup
Slide Show Speed
Music Repeat Mode
Movie Repeat Mode
Cont. movie play help
Screen Saver Run Time
Information
◄
Normal
►
•
•
•
•
Slide Show Speed → Fast/Slow/Normal
Select to control the slide show speed.
:
:
:
:
On
On
On
Music Repeat Mode → On/Off
Select to repeatedly play music files.
3 min
Remove Safely
Movie Repeat Mode → On/Off
Select to repeatedly play movie files.
Device
Move
Adjust
Return
SUM
Cont. movie play help → On/Off
Select to display the help pop-up message for
continuous movie playback.
•
•
•
Screen Saver Run Time → 1 min/3 min/5 min
Select to set the waiting time before the screen saver appears.
Information
Select to viewing the information of the connected device.
Remove Safely
You can remove the device safely from the TV.
English - ꢂ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the DLNA Network
DLNA allows you to watch videos and pictures saved on your PC on your TV through a network
connection in Wiselink Pro mode. This removes the need to copy them to a USB storage device and then
connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA
application must be installed on your PC.
Network Connections Diagram
PC
tV
LAN
LAN
External Modem
(ADSL/VDSL/Cable tV)
1
ꢁ
ꢀ
1. Connect the [LAN] port on the rear panel of the TV to the external modem with a LAN Cable.
2. Connect the PC to which the “DLNA PC Share Manager” program will be installed and the external
modem using a LAN cable.
3. Connect the LAN port on the wall and the external modem with a Modem Cable.
➣
You can connect the TV to the PC directly without connecting it through a Sharer(Router).
Connecting to the Network
1. When connecting to the network is complete, set up the network on the TV.
➣
A Wireless Internet connection does not support DLNA.
➣
The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same
(e.g. IP Address: 123.456.789.XX )
2. Run a “Network Test” to check the network settings.
Installing the DLNA Application
To play content on the PC on the TV, you have to first install the application.
System Requirements
1. Insert the Program CD supplied with this TV into your PC.
2. 20MB of free hard disk space is needed for the program installation.
➣
If you share files, up to 20MB of hard disk drive space is required for each 100 files.
➣
If you cancel file sharing, the hard disk drive space used for the thumbnail information is also
freed.
Supported Formats
1. Image: JPEG (jpg, jpeg)
2. Audio: MP3 (mp3)
3. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4 /
H.264 (mpg, mpeg)
English - ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the application
1. Run the Setup.exe file on the Program CD supplied with the product.
➣
2. Install the SAMSUNG PC Share Manager as shown in the figures below.
►
►
►
►
►
3. When the installation is complete, the PC Share Manager icon appears on your Desktop.
➣
Double-click the icon to run the program.
English - ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DLNA Application
the Program Screen Layout
1
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
1. Menus: The following application menus are provided : “File”, “Share”, “Server”, and “Help”.
2. Click to share the selected PC server folder.
3. Click to cancel sharing.
4. Click to refresh the PC folder and files.
5. Click to synchronize the share status.
6. The folders and files of the PC to be shared are listed.
7. Folders shared by the user are listed.
File
Property: Shows information on the selected file or folder.
Name
Modified
Method 1: Select a file or folder and select the “File” menu
and then select the “Property” sub-menu.
Method ꢀ: Select a file or folder, right-click over the selected
file or folder and then select “Property” from the pop-up menu.
Name
Name
English - ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit: Exits the DLNA application.
If you select “Exit” without applying the changes after
changing the shared status, a message will appear asking
if you want to apply the changed settings to the PC. Select
“Yes” to apply the changes and exit the application.
Name
Yes
No
Share
Sharing a Folder
You can share a folder from your PC to the TV. The
maximum number of folders that can be shared is 32.
➣
Your PC will operate as a server to the TV.
Name
Modified
Method 1: Select a folder in “My Computer”, select the
“Share” menu and then select the “Share Folder” sub-menu.
Method ꢀ: Select a folder in “My Computer”, right-click over
the selected folder and then select “Share Folder” from the
pop-up menu.
Name
Modified
Method ꢁ: Locate the mouse pointer over a folder in the “My
Computer” folder list in the left pane and drag&drop the folder
into the Shared Folders pane. If a message appears asking
you to confirm the shared folder, select “Yes”.
Name
Modified
Yes
No
Cancelling a Shared Folder
You can cancel a shared folder on your PC. Select a folder
from the “Shared Folder” pane and select “Unshare Folder”.
Name
Modified
Method 1: Select a folder from the “Shared Folder” pane,
select the “Share” menu and then select “Unshare Folder”.
Method ꢀ: Select a folder from the “Shared Folder” pane,
right-click over the selected folder and then select “Unshare
Folder” from the pop-up menu.
Name
Modified
English - ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Method ꢁ: Locate the mouse pointer over a folder in the
“Shared Folder” pane and drag&drop the folder into the “My
Computer” pane. If a message appears asking you to confirm
the cancelation, select “Yes”.
Name
Modified
Yes
No
Applying the Current Settings
Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder.
The “Set Changed State” menu applies changes to shared folders to the data saved with the PC share
program.
Since applying changes to the internal data is a time-consuming process, this function enables users to
apply changes to the data only when required.
Until the “Set Changed State” menu is selected, the changed state of the shared folder is not applied to
the server.
Changes to the shared folders are not applied to your PC until you select the “Set Changed State” menu.
Method 1: Select the “Share” menu and select the “Refresh
DB” sub-menu.
Name
Modified
Method ꢀ: Click the “Set Changed State” icon.
Name
Setting the Access Permission
To enable the TV to find your PC, the TV must be set to “Set
Device Policy” in the Access Permission Settings window.
In addition, the PC server and the TV must be on the same
subnet.
Method: Select the “Share” menu and select “Set Device
Policy”.
Rejected items are represented in gray.
You can change the access permissions by using the Allow
“Accept”/”Deny” button.
To delete an item, select the item and select “Delete Item”.
English - ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Server
Server
You can run or stop using your PC as a server.
Run DLNA Digital Media Server when Windows Starts
You can determine whether to start the PC server automatically when Windows starts.
Change server name
You can rename the PC server. Enter a new name and
click “OK”. The new name will appear at the top right of the
Name
Modified
window and will appear on the TV.
Name
Modified
Name
help
Version
The program version information message box appears.
Name
Modified
English - ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DLNA Function
Using the DLNA Menu
DLNA (Digital Living Network Alliance) enables content
saved on a DLNA server (usually your PC) connected
to your TV or over a network to be played.
DLNA: Server
WISELINk Pro
PHOTO
Wiselink Pro enables playing content saved on a USB
memory device connected to the TV, while DLNA
enables playing content saved on a DLNA server (your
PC) connected to your TV or over the network. The
procedures to use the content are the same as those
for WISELINK Pro.
Photo
SUM
Music
Movie
Setup
If you install the PC share manager program supplied
with the TV onto a PC, you can have the PC perform
the role of a DLNA server over the network.
Device
e
Exit
1. Press the W.LINk button on the remote control to display the “DLNA” menu.
E
2. Press the ◄ or ►button to select an icon (Photo, Music, Movie, Setup), then press the ENtER
button.
➣
To exit “DLNA” mode, press the W.LINk button on the remote control.
Photo
•
Photo List option menu
Sorting Photo List / Viewing the Information / Rotating the Photo file / Viewing a Slide Show.
•
During a Slide Show option menu
Play & Pause / Slide Show Speed / Zoom / Rotate
Music
•
Music List option menu
Sorting Music List / Viewing the Information / Playing a music file
•
Music Play Option Menu
Play & Pause / Repeat Mode
Movie
•
Movie List option menu
Sorting Movie List / Viewing the Information / Playing a Movie file
•
Movie Play Option Menu
Play & Pause / Repeat Mode
Setup
Slide Show Speed / Music Repeat Mode / Movie Repeat Mode / Screen Saver Run Time / Information
➣
DLNA does not support the following functions.
-
-
-
-
-
-
The Background Music and Background Music Setting functions.
Sorting files by preference in the Photo, Music, and Movie folders.
The Change Group Info function.
The Delete function.
The Safe Remove function.
The π (REW) / µ (FF) button functions while a movie is playing.
➣
➣
The Skip (◄/► button) or Pause function may not work while a movie is playing for the DLNA of
other manufacturers, depending on the corresponding content information.
The playing time may not be displayed while a movie is playing.
English - ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating the Content Library
The “Content Library” enables you to view or play the built-in contents on the TV or stored on your USB
device. The Delete, Move and Update functions will not work with the built-in content on the TV.
1. Press the MENU button. Press the ▲ or ▼ button to
Input
tV
E
select “Input”, then press the ENtER
button.
Source List
Edit Name
: tV
2. Press the ▲ or ▼ button to select “Content Library”,
Anynet+(hDMI-CEC)
WIESLINk Pro (USb/DLNA)
Content Library
E
then press the ENtER
button.
Product Guide
➣
The “Content Library” main menu is displayed.
Move
Enter
Return
O
Press the CONtENt button on the remote control to
display the “Content Library” main menu.
3. Press the ◄ or ► button to select an icon (Gallery,
Cooking, Game, Children, Fitness), then press the
E
Content Library
ENtER
button.
➣
➣
The selected item will be run.
Gallery
Refer to the explanation for the button in the
display when the user uses the button while
content is running.
Gallery
Cooking
Game
Children
Fitness
Setup
R
e
USB
Return
Exit
button
Operations
Wheel (▲/▼/◄/►)
Move the cursor and select an item.
Select the currently selected item.
Return to the previous menu.
E
ENtER
REtURN
EXIt
Stop the current function and return to the “Content Library” main menu.
Stop Content Library mode and Returns to TV mode.
Button that provide functions are described on the corresponding page.
You can control the volume of the played content.
tV
Colour button
– VOL +
CONtENt
Exit Content Library mode.
Contents Library contains text, graphics, images, multimedia, and other materials for informational and promotional purposes
only. Materials in Contents Library has been modified and keeps being revised and updated. The Materials in the Contents
Library may not be suitable for all audiences.
Information in the Contents Library is provided “as is.” Although the information provided to you in the Contents Library
is obtained or complied from sources we believe to be reliable, Samsung cannot and does not guarantee the accuracy,
validity, timeliness or completeness of any information or data made available to you for any particular purpose. Under
no circumstances, including negligence, shall Samsung be held liable, whether in contract or tort, for any direct, indirect,
incidental, special or consequential damages, attorney fees, expenses, or any other damages whatsoever arising out of, or
in connection with, any information contained in, or the use of, the Contents Library, even if advised of the possibility of such
damages.
English - ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Content Library
Gallery
•
Art/Relaxation/Party
This function plays a SlideShow with high resolution images and background music and produces
various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere.
➣
➣
➣
Press the yellow button to playback all imageries.
There is default music for each for the “Art”, “Relaxation”, and “Party” options.
Press INFO button to see the credit and detail information in English for the imagery. Press INFO
button again or press ► button for the credit information to go away (currently, the credit supports
English only.)
➣
➣
The copyrights of the “Gallery” contents and all issues related to them are reserved by Gallery
Player, Inc.
the “Using Additional Content Using External USB Memory Storage” section (page 59) to see how
to play additional imagery.
Cooking
•
Starters / Main Courses / Desserts
You can view various recipes that you can then easily follow step by step. Enjoy these contents which
give you great ideas for meals.
➣
The recipes introduced in the “Cooking” contents on the Samsung TV are based on recipes
published by Anness Publishing.
➣
The copyrights of the “Cooking” contents and all issues related to them are reserved by Practical
Pictures.
Game
•
Dynamic bowling/Minimini Cook: this category provides entertainment games for the whole
family.
➣
For the buttons used in the games, refer to the directions on the screen.
➣
For the 2 embedded games, the copyrights are reserved by each of the corresponding game
providers and all issues related to copyrights are reserved by the corresponding game providers.
➣
More detail instruction on how to play a game is given at the beginning of each game page.
Children
•
Story / Song / Play
This is educational and interactive content that children can watch repeatedly. Enjoy existing stories,
songs and games with the Boowa and Kwala characters.
➣
The copyrights of the “Children” contents and issues related to them are reserved by UpToTen.
English - ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness (depending on the country)
•
basic Stretches / Massage
This is beneficial health management content that provides stretching and massage exercises that can
be enjoyed by the whole family.
➣
This is beneficial health management content that provides stretching and massage exercises that
can be enjoyed by the whole family. The “Basic Stretches” contents for the Samsung TV are based
on the book Stretching by Suzanne Martin which is published by DK and the “Massage” contents are
based on the books published by Anness Publishing.
➣
The copyrights to “Basic Stretches” are reserved by the DK Publishing Company. The copyrights
to the “Massage” content are reserved by Practical Pictures. All issues related to copyrights are
reserved by the corresponding company.
Using the Remote Control button in Fitness menu
button
Operations
Wheel (◄/►)
View to previous step / View to next step
Play or pause (in Basic and Advanced Stretches)
E
ENtER
Screen Saver Run time
Off / ꢂ hour / ꢆ hour / 10 hour
•
Select to set the waiting time before the screen saver appears.
Press the yellow button to select “Setup” in the “Content Library” main menu.
Using Additional Content Using External USb Memory Storage
You can download contents onto a USB memory device and play them on your TV. (The contents on the
external USB device are played directly without being copied to the built-in Flash memory of the TV.)
Playing and Exiting New Content
1. Press the Red button in the “Content Library” main
Content Library
menu.
➣
➣
The USB Browser main screen is displayed.
A list of files saved on the USB device is
displayed.
Gallery
2. Press the ▲ or ▼ button to move to the file (or
E
folder) you want to play. Press the ENtER
button.
Gallery
Cooking
Game
Children
Fitness
➣
➣
➣
The selected content is played.
Not support game program.
Setup
R
e
USB
Return
Exit
Content Library
USB
1/1
The use of contents is the same as in using
the TV memory contents.
<<
>>
Cooking
Gallery
Fitness
Children
➣
➣
To return to the USB browser main screen,
press the EXIt button.
Cooking
To exit “Content Library” mode, press the
P>/< button on the remote control.
▼
▲
R
TV Memory
Show UDN
Return
English - ꢃ9
Download from Www.Somanuals.com. All Manuals Search And Download.
➣
“Content Library” only supports USB Mass Storage Class devices (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
Downloading New Contents
New content other than the built-in contents will be provided via the Samsung.com website with or without
charge.
•
Downloading Content
2. Enter the product number (UDN, Unique Device Number) when it is asked.
3. Select a content item in the Contents Download page.
4. Download the contents onto the USB memory device.
➣
“Content Library” only supports USB Mass Storage Class devices (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
5. Go to “Content Library” main menu by pressing “Contents” button or choosing “Content Library”
(Menu → Input → “Content Library”)
6. Plug the USB memory into USB port on the side of the TV.
•
•
Finding a product number (Unique Device Number, UDN)
1. Insert the USB memory into the USB port on the side of the TV.
2. In the USB Browser main screen, press the Green button (Show UDN).
3. The 18-digit number on the screen is the product code.
Provided Content
-
English - ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
the Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the tV.
to directly connect to tV
Connect the [HDMI 1],
[HDMI 2], [HDMI 3]
or [HDMI 4] jack
tV
Anynet+
Device 1
Anynet+
Device ꢀ
Anynet+
Device ꢁ
Anynet+
Device ꢂ
on the TV and the
HDMI OUT jack of
the corresponding
Anynet+ device using
the HDMI cable.
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
to connect to home theater
1. Connect the
tV
[HDMI 1],
Anynet+
Device 1
home theatre
[HDMI 2]
,
[HDMI 3] or
[HDMI 4] jack
on the TV and
the HDMI OUT
jack of the
corresponding
Anynet+ device
using the HDMI
cable.
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
Anynet+ Device ꢀ Anynet+ Device ꢁ Anynet+ Device ꢂ
ꢀ. Connect the
HDMI IN jack of
the home theatre
and the HDMI
OUT jack of the
corresponding
Anynet+ device
using the HDMI
cable.
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
hDMI 1.ꢁ Cable
➣
➣
Connect only one receiver.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support
Anynet+ functions.
➣
➣
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Anynet+
the following settings are to use Anynet+ functions.
Using the Anynet+ Function
tools
Anynet+ (hDMI-CEC)
1. Press The tOOLS button. Then Press the ENtER button to
select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
ꢀ. Press the ENtER button to select "Anynet+ (HDMI-CEC)",
then press the ENtER button.
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
:
:
:
:
:
:
Standard
Custom
Off
Off
Off
Mono
ꢁ. Press the ▲ or ▼ button to select "On", then press the
ENtER button.
Move
Enter
Exit
➣
➣
➣
The "Anynet+ (HDMI-CEC)" function is enabled.
If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
tV
P9
View tV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
:Off
Move
Return
Enter
Setup
Anynet+ (hDMI-CEC)
Auto turn Off
:
:
Off
On
Searching Connections
Move
Enter
Return
turning an Anynet+ Device Off Automatically when the tV is turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
Setup
the ENtER button.
Anynet+ (hDMI-CEC)
Auto turn Off
Searching Connections
: On
:
ꢀ. Press the ▲ or ▼ button to select "Yes", then press the
No
ENtER button.
Yes
➣
➣
The "Auto turn off" function is enabled.
If you select "No", the "Auto turn off" function is cancelled.
Move
Enter
Return
Press the EXIt button to exit.
➣
➣
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when the TV is
turned off. However, if the device is recording, it may not be turned off.
English - ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning and Switching between Anynet+ Devices
1. Press the tOOLS button.
tV
P9
View tV
Then press the ENtER button to select "Anynet+(HDMI-
CEC)".
Select Device
Record
ꢀ. Press the ▲ or ▼ button to select "Select Device", then press
the ENtER button.
Menu on Device
Device Operation
ꢁ. Press the ▲ or ▼ button to select to a particular device and
Receiver
Setup
:Off
press the ENtER button. It is switched to the selected device.
ꢂ. If you cannot find a device you want, press the ▲ or ▼ button to
Move
Return
Enter
select "Setup", then press the ENtER button.
Setup
ꢃ. Press the ▲ or ▼ button to select "Searching Connections",
then press the ENtER button.
Anynet+ (hDMI-CEC)
Auto turn Off
:
:
On
The message "Configuring Anynet+ connection" is displayed.
When searching devices completes, the connected devices are
listed in the Anynet+ menu.
Yes
Searching Connections
➣
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the operation during the switching
operation.
Move
Enter
Return
➣
➣
➣
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of found devices is not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select "Searching Connections" menu to search devices.
➣
If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the tOOLS button.
English - ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Anynet+ Menu
the Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the tV.
Anynet+ Menu
View tV
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Select Device
Record
Starts a recording. (This menu works only for a device supporting
recording.)
Menu on Device
Device Operation
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Receiver
Setup
Sound is output through the receiver.
You can set the environment for using Anynet+.
tV Remote Control buttons Available in Anynet+ Mode
Device type
Operating Status
Available buttons
Numeric buttons
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
▲/▼/◄/►/ENtER buttons
Colour buttons
EXIt button
Anynet+ Device
(Backward search)/
(Forward search)/
After switching to the device,
while playing a file
(Stop)/
(Pause)
(Play)/
After switching to the device,
when you are watching a TV
programme
Device with built-in tuner
P
/
button
VOL - / + button
MUtE button
Audio Device
When Receiver is activated
➣
➣
➣
The Anynet+ function only works when the remote control is set to TV.
The button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices
only using the TV remote control.
➣
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
➣
➣
➣
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the colour buttons may not work properly.
The
,
operations may differ depending on the device.
English - ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
You can make a recording of a tV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣
➣
You can also record the source streams by selecting Record after pressing the tOOLS button.
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
Listening through a Receiver
You can listen to sound through a receiver instead of the tV speaker.
1. Press the tOOLS button. Then Press the ENtER button to
select "Anynet+(HDMI-CEC)".
tV
P9
Press the ▲ or ▼ button to select "Receiver", then press the
View tV
ENtER button.
ꢀ. Press the ◄ or ► button to select to "On", then press the
ENtER button.
Now you can listen to sound through the receiver.
ꢁ. Press the EXIt button to exit.
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
:Off
➣
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
Move
Return
Enter
➣
If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣
➣
In case of a content with copyright problem, listening through the receiver may not properly operate.
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 22)
English - ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
Solution
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
■
■
■
■
■
■
■
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels, Operating
WIESLINK Pro, Plug & Play, etc.)
■
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
■
■
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the tV button on the TV remote control to switch to TV. Then press the
tOOLS button to show the Anynet+ menu and select a menu you want.
Select View tV in Anynet+ menu.
I want to start
Anynet+.
■
I want to exit Anynet+.
■
■
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
■
Press any of P
/
, PRE-Ch, and such to change to the TV mode. (Note that
the channel button operates only when a tuner-embedded Anynet+ device is not
connected.)
the Connecting to
Anynet+ device…
message appears on
the screen.
■
■
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
the Anynet+ device
does not play.
You cannot use the play function when Plug & Play is in progress.
the connected device
is not displayed.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
■
If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3
cable or power cord or a power failure, please repeat the device scan.
the tV programme
cannot be recorded.
Check whether the antenna jack on the recording device is properly connected.
English - ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
teletext Feature
Most television stations provide written information services via teletext. the index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
➣
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1.
(exit)
Exit from the teletext display
2
6 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
1
3
4
8 (store)
Used to store the teletext pages.
4 (size)
7
8
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
5
6
5 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
9
0
2
3
/ (teletext on/mix)
!
4
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
with the current broadcasting screen.
5
6
7
8
9
0
1 (sub-page)
Used to display the available sub-page.
@
#
2 (page up)
Used to display the next teletext page.
3 (page down)
Used to display the previous teletext page.
0 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
8(store) button.
!
9 (hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
@
#
7 (cancel)
Used to display the broadcast when searching for a page.
Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext
page are colour-coded and can be selected by pressing the coloured buttons. Press one of them
corresponding to the required. The page is displayed with other
coloured information that can be selected in the same way. To
display the previous or next page, press the corresponding coloured
button.
➣
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
the teletext pages are organized according to six categories:
Part
Contents
A
b
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
ꢀ
ꢀ
Selecting a title in a list
ꢀ
➣
Selecting a coloured heading (FASTEXT system)
Press the tV button to exit from the teletext display.
English - ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Wall-Mount (Sold separately) (depending on the model)
Once the auto wall mount is installed, your tV’s position can be easily adjusted.
tV Rear Panel
Auto Wall-Mount
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
Setup
tV
Plug & Play
Language
time
➣
➣
The Auto Wall-Mount screen is displayed.
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
:English
Cable Network Setup
Auto Wall-Mount
Melody
:Off
Entertainment : Off
Energy Saving : Off
PIP
• Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENtER button.
Move
Enter
Return
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the ENtER button.
Remembering the Position
ꢀ. Adjust to the desired position using the ▲,▼,◄,► buttons.
Auto Wall-Mount
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENtER button.
➣
Position
Adjust
1
ꢀ
ꢁ
The position is initialized to the default setting.
Save
INFO Centre
ꢁ. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
➣
To not save the current position, press the REtURN button.
When selecting a save mode, you cannot use the Colour
buttons.
Save
Select a mode to Save.
Position1
ꢂ. Press the ENtER button to save.
Positionꢀ
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
Positionꢁ
Move
Enter
Return
ꢃ. Press the ENtER button.
The saved Position appears on the left side of the OSD.
➣
English - ꢄ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
Auto Wall-Mount
ꢀ. Pressing a Colour (Red, Green, Yellow) button moves the auto
Position1
wall mount to the saved position.
➣
You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1),
Position
Adjust
1
ꢀ
ꢁ
Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position,
the position display will disappear.
Save
INFO Centre
➣
➣
➣
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
➣
This installation manual is to be used when attaching the wall mount to a wall. When attaching to
other building materials, please contact your nearest dealer.
➣
➣
The auto wall mount will not work when Anynet+ and WIESLINK Pro are operating.
40 and 46 inch models are not compatible with the old electrically powered wall mount model
(WMN5090A*).
Using the Anti-theft kensington Lock (depending on the model)
The Kensington lock is a device used to physically fix the system when using it in a public
place. the appearance and locking method may differ from the illustration depending on the
manufacturer. Refer to the manual provided with the kensington lock for proper use. the locking
device has to be purchased separately.
1. Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
Cable
ꢀ. Connect the Kensington lock cable.
ꢁ. Fix the Kensington lock to a desk or a heavy
Figure ꢀ
stationary object.
Figure 1
➣
The place of the Kensington Lock may be
different depending on its model.
<Optional>
English - ꢅ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing the tV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions provided on the
included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as
follows.
Wall
Wall
to avoid the tV from falling:
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have
been firmly installed onto the wall.
➣
➣
You may need additional material such a s an anchor depending on the type of wall.
Since the necessary clamps, screws, and string are not supplied, please purchase these
additionally.
2. Remove the screws from the center back of the TV, put the screws into the clamps, and then
fasten the screws onto the TV again.
➣
➣
Screws may not be supplied with the product. In this case, please purchase the screws of the
following specifications.
Screw Specifications
-
-
For a 17 ~ 29 Inch LCD TV: M4 X 15
For a 32 ~ 40 Inch LCD TV: M6 X 15
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and
then tie the string tightly.
➣
➣
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
➣
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue
for failure. If you have any doubt about the security of your connections,contact a professional
installer.
English - ꢅ1
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting: before Contacting Service Personnel
No sound or picture
♦
♦
♦
♦
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
♦
♦
♦
Check the volume.
Check whether the MUtE button has been pressed on the remote control.
Check if "TV Speaker" is on
Screen is black and power
indicator light blinks steadily
♦
♦
♦
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
No picture or black and white
picture
♦
♦
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference
♦
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
♦
♦
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
♦
♦
♦
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
‘Check signal cable.’
message is displayed
♦
♦
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, 'Not Supported
Mode.' message is displayed
♦
♦
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The damaged picture
appears in the corner of the
screen
If "Just Scan" is selected in some external devices, the damaged picture
may appear in the corner of the screen. This symptom is caused by
external devices, not TV.
The ‘Resets all settings to
the default values’ message
appears.
This appears when you press and hold the EXIt button for a while. The
product settings are reset to the factory defaults.
You may see small particles
if you look closely at the edge
of the bezel surrounding the
TV screen.
This is part of the product’s design and is not a defect.
The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - ꢅꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model Name
LAꢂ0Aꢅꢃ0
LAꢂꢄAꢅꢃ0
LAꢃꢀAꢅꢃ0
Screen Size
(Diagonal)
40 inches
1920 x 1080 @ 60 Hz
10W x 2
46 inches
1920 x 1080 @ 60 Hz
10W x 2
52 inches
1920 x 1080 @ 60 Hz
10W x 2
PC Resolution
(Optimum)
Sound
Output
Dimensions (WxDxh)
Body
With stand
1040 x 85 x 638 mm
1040 x 272 x 686 mm
1172 x 98 x 712 mm
1172 x 300 x 766 mm
1321 x 107 x 805 mm
1321 x 338 x 861 mm
Weight
With Stand
19 kg
29 kg
37 kg
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel
(Left / Right)
0˚
➣
➣
➣
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - ꢅꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
|