Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Web Site
Customer Care Centre
AUSTRALIA
CHINA
1300 362 603
800-810-5858
400-810-5858
010-6475 1880
HONG KONG:3698 - 4698
INDIA
3030 8282
1-800-3000-8282
1800 110011
INDONESIA
JAPAN
0800-112-8888
0120-327-527
MALAYSIA
NEW ZEALAND
PHILIPPINES
1800-88-9999
0800 SAMSUNG (0800 726 786)
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
02-5805777
SINGAPORE
THAILAND
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
LCD TV
TAIWAN
0800-329-999
VIETNAM
SOUTH AFRICA
U.A.E
1 800 588 889
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model
Serial No.
BN68-02101L-00
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
❑
License
TruSurround HD, SRS and
incorporated under license from SRS Labs, Inc.
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
●
Do not display still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
●
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
●
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
SETTING UP YOUR TV
INPUT
■
■
■
■
■
Viewing the Control Panel ................................................................. 2
Accessories ....................................................................................... 3
Viewing the Connection Panel........................................................... 4
Viewing the Remote Control.............................................................. 6
Installing Batteries in the Remote Control ......................................... 7
■
Input Menu....................................................................................... 20
RECOMMENDATIONS
■
Teletext Feature............................................................................... 21
Installing the Stand.......................................................................... 22
Disconnecting the Stand.................................................................. 23
Anti-Theft Kensington Lock ............................................................. 23
Securing the Installation Space....................................................... 24
Securing the TV to the Wall............................................................. 24
Troubleshooting: Before Contacting Service Personnel.................. 25
Specifications .................................................................................. 26
■
■
■
■
■
■
■
OPERATION
■
■
■
Viewing the menus ............................................................................ 7
Placing Your Television in Standby Mode.......................................... 8
Plug & Play Feature........................................................................... 8
CHANNEL
■
Channel Menu ................................................................................... 9
PICTURE
■
Configuring the Picture Menu...........................................................11
Viewing Picture-in-Picture................................................................ 14
Using Your TV as a Computer (PC) Display.................................... 15
Setting up the TV with your PC........................................................ 16
■
■
■
SOUND
■
■
Configuring the Sound Menu........................................................... 16
Selecting the Sound Mode .............................................................. 17
SETUP
■
Configuring the Setup Menu............................................................ 18
❑
Symbol
N
O
T
Note
One-Touch Button
TOOLS Button
Press
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀ
SETTING UP YOUR TV
N
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
¦
Viewing the Control Panel
N
N
The product colour and shape may vary depending on the model.
The front panel buttons can be activated by touching them with your finger.
8
8
1
2
3
4 5
6
7
1
REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
SOURCE : Toggles between all the available input sources. In the on-screen menu, use this button as you would use the
ENTER button on the remote control.
3 y: Press to increase or decrease the volume.
In the on-screen menu, use the buttons as you would use the ◄ and ► buttons on the remote control.
4 P (POWER): Press to turn the TV on and off.
POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.
2
E
E
y
5
6 z: Press to change channels. In the on-screen menu, use the
z
buttons as you would use the ▼ and ▲
buttons on the remote control.
7
8
MENU: Press to see an on-screen menu of your TV’s features.
SPEAKERS
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁ
¦
Accessories
(M4 X L16)
Remote Control & Batteries
(AAA x 2)
Power Cord
Stand Screw X 2
Cleaning Cloth
●
Owner’s Instructions
●
Warranty card
●
Safety Guide
●
Registration Cards
N
N
N
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The items colour and shape may vary depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢂ
¦
Viewing the Connection Panel
[TV Rear Panel]
1
2
3
Power Input
6
5
4
N
1
The product colour and shape may vary depending on the model.
SERVICE
–
Connector for service only.
2
HDMI/PC IN [HDMI(DVI)]
Connects to the HDMI jack of a device with an HDMI output.
N
N
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
N
Use the HDMI/PC IN [HDMI(DVI)] jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection and the HDMI/PC IN [AUDIO] jacks for audio. When using an HDMI / DVI
cable connection, you must use the HDMI/PC IN [HDMI(DVI)] jack.
HDMI/PC IN [AUDIO]
•
•
Connect to the audio output jack on your PC.
DVI audio outputs for external devices.
HDMI/PC IN [PC]
•
Connect to the video output jack on your PC.
N
N
If your PC supports an HDMI connection, you can connect this to the HDMI/PC IN [HDMI(DVI)] terminal.
If your PC supports a DVI connection, you can connect this to the HDMI/PC IN [HDMI(DVI)] / [AUDIO] terminal.
3
ANT IN
Connects to an antenna or cable TV system.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢃ
4
COMPONENT IN / AV IN
–
Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends
to corresponding component video out connectors on the DVD.
–
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (PR, PB, Y) on your set.
–
–
The PR, PB and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
–
The COMPONENT IN jack is also used as the AV IN 1 jack.
N
Connect the video cable to the COMPONENT IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN [R-AUDIO-
L] jacks.
5 H (HEADPHONE)
–
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
N
N
N
N
Using the sound function is restricted when connecting headphones to the TV.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to the TV.
The headphone volume and TV volume are adjusted separately.
6
KENSINGTON LOCK
–
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
N
The location of the Kensington Lock may be different depending on its model.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢄ
¦
Viewing the Remote Control
N
N
N
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.
1
POWER : Turns the TV on and
off.
%
^
&
*
MENU : Displays the main on-
screen menu.
2
NUMERIC BUTTONS : Press to
change the channel.
HDMI : Selects the HDMI mode
directly.
!
1
2
3 E : Performs the same function
as the ENTER button of
RETURN : Returns to the
previous menu
E
the directional buttons. When
switching channels with the
UP▲ / DOWN▼ / LEFT◄ /
RIGHT► / ENTER
select on-screen menu items and
change menu values.
E
: Use to
numeric buttons, and you press
the channel number and then the
ENTER
immediately switched.
E
button, the channel is
@
#
3
4
(
)
a
EXIT : Press to exit the menu.
P.SIZE : Picture size selection
4 Y : Press to increase or
decrease the volume.
S.MODE : Sound mode
$
selection.
5
SOURCE : Press to display
and select the available video
sources.
5
6
%
^
Teletext Functions
6
7
8
!
@
CH LIST : Displays the Channel
List on screen.
5 0 : Teletext mode selection
7
&
(LIST / FLOF)
TOOLS : Use to quickly select
frequently used functions.
6 8 : Teletext store
*
(
7 4 : Teletext size selection
8 5 : Teletext reveal
INFO : Press to display
information on the TV screen.
8
TV : Selects the TV mode
directly.
9
Fastext topic selection
0 / : Alternately select
9
0
PRE-CH : Enables you to return
to the previous channel you were
watching.
Teletext, Double, or Mix.
)
a
! : : Exit from the Teletext
display
#
MUTE
cut off the sound.
M
: Press to temporarily
@ 1 : Teletext sub page
$ 2 : Teletext next page
$ > : Press to change
P
<
3
: Teletext previous page
channels.
% 6 : Teletext index
& 9 : Teletext hold
( 7 : Teletext cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢅ
¦
Installing Batteries in the Remote Control
ꢀ. Lift the cover at the back of the remote control upward as shown in the figure.
ꢁ. Install two AAA size batteries.
N
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.
ꢂ. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
If the remote control doesn’t work, check the following:
N
N
•
•
•
•
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
•
Is there a special fluorescent light or neon sign nearby?OPERATION
OPERATION
¦
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
MENU Button
Display the main on-screen menu.
RETURN Button
Return to the previous menu.
ENTERE
/ DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
EXIT
Exit the on-screen menu.
❑
Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu.
ꢀ. Press the MENU button.
TV
Picture
Mode
: Standard
ꢆ
ꢁ. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Backlight
Contrast
Brightness
Sharpness
Colour
Channel, Setup, Input.
80
ꢃꢄ
ꢄ0
ꢄ0
ꢄ0
Tint (G/R)
G
ꢄ0
R
Advanced Settings
Picture Options
Reset
: OK
U
Move
E
Enter
R
Return
ꢂ. Press the ▲ or ▼ button to select one of the icons.
TV
Picture
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
ꢆ
80
ꢃꢄ
ꢄ0
ꢄ0
ꢃ. Then press the ENTER
E
button to access the icon’s sub-menu.
ꢄ. Press the ▲ or ▼ button to select the icon’s submenu.
Tint (G/R)
G
ꢄ0
R
ꢄ0
Advanced Settings
Picture Options
Reset
: OK
U
Move
E
Enter
R
Return
ꢅ. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
▲
Backlight
ꢀ0
ꢆ. Press the ENTER
E
button to complete the configuration. Press the EXIT button to exit.
▼
U
Move
L
Adjust
R
Return
Help icon
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢆ
¦
¦
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
ꢀ. Press the POWER
P
button on the remote control.
N
The screen is turned off and a red standby indicator appears on your set.
ꢁ. To switch your set back on, simply press the POWER button again.
P
N
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
ꢀ. Press the POWER
P
button on the remote control.
button on the TV.
N
You can also use the POWER
P
ꢁ. Press the ▲ or ▼ button to select the Menu language, then press the ENTER
E
button.
button.
We recommend setting the TV to Home Use mode for the best picture in your home environment.
ꢂ. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
N
N
N
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
ꢃ. The message Check antenna input. is displayed with OK selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
E
N
ꢄ. Select the appropriate area by pressing the▲ or ▼ button.
Press the ENTER button to confirm your choice.
E
ꢅ. The Auto Store menu is displayed with the Start selected. Press the ENTER
E
button.
N
N
N
The channel search will start and end automatically.
Press the ENTER button at any time to interrupt the memorization process.
After all the available channels are stored, the Clock Set menu appears.
button.
E
ꢆ. Press the ENTER
E
Select the Month, Day, Year, Hour, Minute, or am/pm by pressing the ◄ or ► button.
Set the Month, Day, Year, Hour, Minute, or am/pm by pressing the ▲ or ▼ button.
N
You can also set the Month, Day, Year, Hour and Minute by pressing the number buttons on the remote control.
8. Press the ENTER button to confirm your setting. The message Enjoy your TV. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
E
E
N
E
If you want to reset this feature...
TV
Setup
ꢀ. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
Plug & Play
Language
Time
Child Lock
Change PIN
Game Mode
Melody
then press the ENTER
ꢁ. Press the ENTER button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.
E
button.
: English
: On
E
N
: Off
: Off
: Off
Energy Saving
PIP
U
Move
E
Enter
R
Return
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 8
CHANNEL
¦
Channel Menu
❑
Area
TV
Channel
Area
: Asia/Europe
You can change the area for channels.
Auto Store
Manual Store
Channel List
Sort
Name
Fine Tune
❑
❑
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your
area). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers.
U
Move
E
Enter
R
Return
N
N
Scans for all channels with active broadcast stations and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER button.
E
Manual Store
N
●
Scans for a channel manually and stores it in the TV’s memory.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
●
●
●
Colour System → Auto / PAL / SECAM / NTSC4.43 / NTSC 3.58: Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / M: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
N
N
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
●
●
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER
E
button.
N
Channel mode
•
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
•
•
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
❑
Channel List
Using the Channel List, you can conveniently lock or add channels.
Adding channels
Using the Channel List, you can add channels.
•
Move to the (
add the channel.
#
) field by pressing the ▲, ▼, ◄ or ► button, select a channel to be added, and press the ENTER
E
button to
•
If you press the ENTER
E
button again, the
c
symbol next to the channel disappears and the channel is not added.
Locking channels
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out
video and audio.
N \ is active when Child Lock is selected to On. (refer to page 18)
•
Move to the
\
field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER
E
button.
N
N
The PIN number input screen appears. Enter your 4 digit PIN number.
If you press the ENTER
E
button again, the
c
symbol next to the channel disappears and the channel lock is
cancelled.
N
N
A blue screen is displayed when Child Lock is activated.
Select On or Off in Child Lock to easily turn the channels which selected on
\
to be active or inactive.
O
You can select these options by simply pressing the CH LIST button on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢇ
❑
Sort
This operation allows you to change the programme numbers of the stored channels.
This operation may be necessary after using the auto store.
N
The channel is moved to its new position and all other channels are shifted accordingly.
❑
❑
Name
Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you
to assign new names.
N
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
N
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
N
N
To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER
Only TV channels can be fine tuned.
E
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀ0
PICTURE
¦
Configuring the Picture Menu
❑
Mode
TV
Picture
You can select the type of picture which best corresponds to your viewing requirements.
Mode
: Standard
ꢆ
T
Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools → Picture Mode.
Backlight
Contrast
Brightness
Sharpness
Colour
80
ꢃꢄ
ꢄ0
ꢄ0
ꢄ0
N
The Picture mode must be adjusted separately for each input source.
Tint (G/R)
G
ꢄ0
R
■
■
■
Dynamic
Advanced Settings
Picture Options
Reset
Selects the picture for increased definition in a bright room.
: OK
U
Move
E
Enter
R
Return
Standard
Selects the picture for the optimum display in a normal environment.
Movie
Selects the picture for viewing movies in a dark room.
❑
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
▲
Backlight
▼
ꢀ0
U
Move
L
Adjust
R
Return
■
■
■
■
■
■
Backlight
Adjusts the brightness of LCD back light.
Contrast
Adjusts the contrast level of the picture.
Brightness
Adjusts the brightness level of the picture
Sharpness
Adjusts the edge definition of the picture.
Colour
Adjusts colour saturation of the picture.
Tint (G/R)
Adjusts the colour tint of the picture.
N
N
In TV, AV modes of the PAL system, you cannot use the Tint (G/R) Function.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
N
N
N
In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢀ
TV
Advanced Settings
: Off
❑
Advanced Settings
Black Tone
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
Dynamic Contrast
Gamma
Colour Space
White Balance
Flesh Tone
: Medium
: 0
: Native
N
N
Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Gamma and White Balance from among the
Advanced Settings items.
: 0
Edge Enhancement : On
U
Move
E
Enter
R
Return
■
■
■
■
Black Tone → Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (red, green, blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the
most natural colour.
●
●
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native: Native Colour Space offers deep and rich colour tone.
■
White Balance
You can adjust the colour temperature for more natural picture colours.
●
●
●
●
●
●
●
R-Offset: Adjusts the red colour darkness.
G-Offset: Adjusts the green colour darkness.
B-Offset: Adjusts the blue colour darkness.
R-Gain: Adjusts the red colour brightness.
G-Gain: Adjusts the green colour brightness.
B-Gain: Adjusts the blue colour brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.
■
■
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
N
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢁ
TV
Picture Options
❑
Picture Options
Colour Tone
Size
: Cool
: ꢀꢅ:ꢇ
N
In PC mode, you can only make changes to the Colour Tone and Size from among the
items in Picture Options.
Digital NR
HDMI Black Level
Film Mode
: Auto
: Normal
: Off
■
Colour Tone → Cool / Normal / Warm1 / Warm2
N
N
Warmꢀ or Warmꢁ is only activated when the picture mode is Movie.
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
U
Move
E
Enter
R
Return
■
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with several screen size options, each
designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as
well. In general, though, you should view the TV in 16:9 mode as much as possible.
O
●
●
Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
ꢀꢅ:ꢇ: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
●
●
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
ꢃ:ꢂ: This is the default setting for a video movie or normal broadcasting.
●
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals
are input.
N
N
N
N
N
N
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only ꢀꢅ:ꢇ and ꢃ:ꢂ mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
button.
by pressing the ► or ENTERE
N
N
Zoom: Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
E
button.
You can initialize the setting.
N
N
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
When Double (
À
,
Œ) mode has been set in PIP, the Picture Size cannot be set.
■
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
N
When the signal is weak, select one of the other options until the best picture is displayed.
■
■
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
N
This function is active only when the external input connects to HDMI (RGB signals).
Film Mode → Off / Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
N
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
❑
Picture Reset → OK / Cancel
Resets all picture settings to the default values.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢂ
¦
Viewing Picture-in-Picture
TV
Setup
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see ‘PIP Settings’ below for details.
Plug & Play
Language
Time
Child Lock
Change PIN
Game Mode
Melody
: English
: On
T
Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools → PIP.
: Off
: Off
: Off
Energy Saving
PIP
N
PIP Settings
U
Move
E
Enter
R
Return
Main picture
Component
HDMI/DVI
PC
Sub picture
TV
TV, AV
TV, AV
TV
PIP
PIP
Source
Size
Position
Programme
: Off
: TV
Õ
Õ
: P ꢀ
:
:
N
N
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will
disappear.
You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
E
Enter
R
Return
❑
❑
❑
PIP → Off / On
You can activate or deactivate the PIP function.
Source
You can select a source of the sub-picture.
Size →
You can select a size of the sub-picture.
If main picture is in HDMI mode, Size is available.
Ã
/
À
/
Œ
N
❑
❑
Position →
You can select a position of the sub-picture.
In Double ( ) mode, Position cannot be selected.
Ã
/
–
/
—
/
œ
N
Œ
,
À
Programme
You can select the channel for the sub-screen.
Programme is available when the Source is set to TV.
N
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢃ
¦
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and
your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.)
ꢀ. First, click on ‘Control Panel’ on the Windows start menu.
ꢁ. When the control panel window appears, click on ‘Appearance and Themes’ and a display
dialog-box will appear.
ꢂ. When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
ꢃ. Navigate to the ‘Settings’ tab on the display dialog-box.
•
•
The correct size setting (resolution) - Optimum: 1360 X 768 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are
recommended.
■
D-Sub and HDMI/DVI Input
Horizontal Frequency
Vertical Frequency
Pixel Clock Frequency
Sync Polarity
Mode
Resolution
(KHz)
31.469
31.469
35.000
49.726
35.910
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.500
(Hz)
(MHz)
25.175
28.322
30.240
57.284
32.750
74.500
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
85.500
89.040
(H / V)
+/-
-/+
-/-
IBM
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
1280 x 720
70.086
70.087
66.667
74.551
59.950
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
70.000
MAC
-/-
VESA CVT
-/+
-/+
-/+
-/-
-/-
-/-
+/+
+/+
+/+
-/-
VESA DMT
-/-
+/+
+/+
-/+
VESA GTF
N
N
N
N
When using an HDMI / DVI cable connection, you must use the HDMI(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢄ
¦
Setting up the TV with your PC
N
Preset: Press the SOURCE button to select PC mode.
TV
Picture
❑
Auto Adjustment
Mode
: Dynamic
Backlight
Contrast
ꢀ0
ꢀ00
ꢃꢄ
ꢄ0
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.
Brightness
Sharpness
Auto Adjustment
Screen
Advanced Settings
Picture Options
Reset
T
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools → Auto Adjustment.
: OK
N
This function does not work in DVI-HDMI mode.
U
Move
E
Enter
R
Return
TV
Screen
❑
Screen
Coarse
Fine
ꢄ0
ꢁꢅ
PC Position
Image Reset
■
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the centre of screen.
U
Move
E
Enter
R
Return
■
■
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
SOUND
¦
Configuring the Sound Menu
TV
Sound
❑
Mode → Standard / Music / Movie / Clear Voice / Custom
Mode
: Standard
O
●
●
You can select these options by simply pressing the S.MODE button on the remote control.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Equalizer
SRS Trusurround HD : Off
Auto Volume
Sound Select
: Off
: Main
●
Movie: Provides the best sound for movies.
●
●
Clear Voice: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.
U
Move
E
Enter
R
Return
❑
❑
Equalizer
The sound settings can be adjusted to suit your personal preferences.
●
Balance L/R: Adjusts the balance between the right and left speaker.
●
ꢀ00Hz / ꢂ00Hz / ꢀKHz / ꢂKHz / ꢀ0KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
N
If you make any changes to these settings, the sound mode is automatically switched to Custom.
SRS TruSurround HD → Off / On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢅ
❑
❑
Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
N
Auto Volume is not available in Component and HDMI mode.
Sound Select → Main / Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
N
T
You can select this option when PIP is set to On.
Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP
→ Sound Select.
¦
Selecting the Sound Mode
You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.
Audio Type
Mono
Dual ꢀ / ꢁ
MONO
Default
Automatic change
DUAL ꢀ
A2 Stereo
Stereo
Dual
STEREO ↔ MONO
DUAL ꢀ ↔ DUAL ꢁ
MONO
Mono
Automatic change
NICAM
Stereo
Stereo
MONO ↔ STEREO
MONO ↔ DUAL ꢀ
Dual
DUAL ꢀ
DUAL ꢁ
N
N
N
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢆ
SETUP
¦
Configuring the Setup Menu
TV
Setup
❑
Language
You can set the menu language.
Plug & Play
Language
Time
Child Lock
Change PIN
Game Mode
Melody
: English
: On
❑
Time
: Off
: Off
: Off
Energy Saving
PIP
■
Clock
Setting the clock is necessary in order to use the various timer features of the TV.
U
Move
E
Enter
R
Return
O
N
The current time will appear every time you press the INFO button.
If you disconnect the power cord, you have to set the clock again.
You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
■
■
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
T
N
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.
To cancel the Sleep Timer function, select Off.
Timer ꢀ / Timer ꢁ / Timer ꢂ
Three different on / off timer settings can be made.
You must set the clock first.
●
On Time
Set the hour, minute, am/pm and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activated.)
Off Time
●
Set the hour, minute, am/pm and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activated.)
Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat or Sat~Sun.
Volume
●
●
●
Select the desired turn on volume level.
Programme
When the On Timer is active, you can turn on a specific channel.
N
N
You can set the hour, minute and channel by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV
is on for too long time.
❑
Child Lock → Off / On
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video
and audio.
N
N
N
N
Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu.
You can lock some channels in Channel List. (refer to page 9)
Child Lock is available only in TV mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀ8
❑
❑
Change PIN
You can change your personal ID number that is required to set up the TV.
N
N
N
Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0.
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0:
POWER (Off) → MUTE → 8 → 2 → 4 → POWER (On).
Game Mode → Off / On
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game menu.
N
Restrictions on game mode (Caution)
•
•
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes slightly.
N
N
Game Mode is not available in regular TV and PC mode.
If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and
connect external devices.
N
If Game Mode is On:
•
•
Picture mode is automatically changed to Standard and cannot be changed.
Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.
N
The Reset Sound function is activated. Selecting the Reset function after settings the equalizer resets the equalizer settings to
the factory defaults.
❑
Melody → Off / Low / Medium / High
A melody sound can be set to come on when the TV is powered On or Off.
N
The Melody does not play
•
•
•
When no sound is output from the TV because the MUTE button has been pressed.
When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.
When the TV is turned off by Sleep Timer function.
❑
❑
Energy Saving → Off / Low / Medium / High / Auto
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
Energy Saving mode option to High to reduce eye fatigue as well as power consumption.
T
Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools →
Energy Saving.
PIP
For detailed procedures on setting up options, refer to page 14.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢀꢇ
INPUT
¦
Input Menu
TV
Input
: TV
❑
Source List
Source List
Edit Name
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O
Press the SOURCE button on the remote control to view an external signal source. TV
mode can be selected by pressing the TV button.
O
You can also watch HDMI mode simply by pressing the HDMI button on the remote control
U
Move
E
Enter
R Return
■
TV / AV / Component / PC / HDMI/DVI
PC always stays activated.
TV
Source List
N
TV
AV
: ----
: ----
: ----
: ----
Component
PC
HDMI/DVI
U
Move
E
Enter
R Return
❑
Edit Name
■
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray
/ HD DVD / DMA
Name the device connected to the input jacks to make your input source selection easier.
N
When connecting an HDMI/DVI cable to the HDMI(DVI) port, you should set the HDMI/DVI mode to DVI or DVI PC in the Edit
Name of the Input mode. In this case, a separate sound connection is required.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁ0
RECOMMENDATIONS
¦
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the remote
control buttons.
N
For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or
some pages may not be displayed.
1
0
(mode)
Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it
switches into the List save mode. In the List save mode, you can save Teletext page
7
into list using the
(store)
Used to store the Teletext pages.
(size)
8(store) button.
2
3
8
4
Press to display the double-size letters in the upper half of the screen. For lower half
of the screen, press it again. To display normal screen, press it once again.
8
9
4
5
5
(reveal)
Used to display the hidden text (answers to quiz games, for example). To display
normal screen, press it again.
1
0
2
3
Colour buttons (red/green/yellow/blue)
!
@
If the FASTEXT system is used by a broadcasting company, the different topics
covered on a Teletext page are colour-coded and can be selected by pressing
the coloured buttons. Press one of them corresponding to the required. The page
is displayed with other coloured information that can be selected in the same
way. To display the previous or next page, press the corresponding coloured
button.
4
#
6
/
(Teletext on/mix)
5
6
Press to activate Teletext mode after selecting the channel providing the Teletext
service. Press it twice to overlap the Teletext with the current broadcasting screen.
7
8
9
0
!
:
(exit)
Exit from the Teletext display.
1
(sub-page)
Used to display the available sub-page.
2
(page up)
Used to display the next Teletext page.
3
(page down)
Used to display the previous Teletext page.
9
(hold)
Used to hold the display on a given page if the selected page is linked with several
secondary pages which follow on automatically. To resume, press it again.
@
#
6
(index)
Used to display the index (contents) page at any time while you are viewing Teletext.
7
(cancel)
Used to display the broadcast when searching for a page.
N
You can change Teletext pages by pressing the numeric buttons on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢀ
The Teletext pages are organized according to six categories:
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
N
Teletext information is often divided between several pages displayed in sequence, which can be accessed by:
•
•
•
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
N
N
N
N
Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text.
Depending upon the transmission, blank side panels can occur when displaying Teletext.
In these cases, additional graphics or text is not transmitted.
Older TV’s which do not support version 2.5 are not capable of displaying any additional graphics or text, regardless of the
Teletext transmission.
O
Press the TV button to exit from the Teletext display.
¦
Installing the Stand
ꢀ. Place the front of the TV onto a soft cloth or cushion on a table.
–
Align the TV bottom along the table edge.
ꢁ. Fasten three screws at bottom of the stand.
N
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one
side.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢁ
¦
Disconnecting the Stand
ꢀ. Place the front of the TV onto a soft cloth or cushion on a table.
–
Align the TV bottom along the table edge.
ꢁ. Remove two screws at bottom of the stand.
¦
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer.
Refer to the manual provided with the Kensington Lock for proper use.
N
N
The locking device has to be purchased separately.
The location of the Kensington Lock may be different depending on its model.
3
2
ꢀ. Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the
1
locking direction (2).
ꢁ. Connect the Kensington Lock cable (3).
ꢂ. Fix the Kensington Lock to a desk or a heavy stationary object.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢂ
¦
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Install the product so the required distances shown in the figure are kept.
N
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
•
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the
product falling.
•
If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in
the internal temperature of the product due to poor ventilation.
N
The appearance may differ depending on the product.
When installing the product with a stand
When installing the product with a wall-mount
ꢀ0 cm
ꢀ0 cm
ꢀ0 cm
ꢀ0 cm
ꢀ0 cm
ꢀ0 cm
ꢀ0 cm
¦
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability,
install the anti-fall device for safety purposes, as follows.
■
To avoid the TV from falling:
ꢀ. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
screws have been firmly installed onto the wall.
N
You may need additional material such as an anchor depending on the type of
wall.
N
Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
Wall
ꢁ. Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
N
Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
N
Screw Specifications
•
For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15
ꢂ. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
N
N
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
Wall
N
Untie the string before moving the TV.
ꢃ. Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢃ
¦
Troubleshooting: Before Contacting Service Personnel
N
Before contacting service personnel
Possible Solution
Problem
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
No sound or picture
Check the volume.
Check whether the MUTE
Normal picture but no sound
M
button has been pressed on the remote control.
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
Screen is black and power
indicator light blinks steadily
Adjust the colour settings.
Check that the broadcast system selected is correct.
No picture or black and white
picture
Try to identify the electrical appliance that is affecting the set and move it further away.
Plug your set into a different mains socket.
Sound and picture interference
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Blurred or snowy picture,
distorted sound
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Remote control malfunctions
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
‘Check signal cable.’ message is
displayed
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
On PC mode, ‘Not Supported
Mode.’ message is displayed
If Screen Fit is selected in some external devices, the damaged picture may appear in the corner of the
screen. This symptom is caused by external devices, not TV.
The damaged picture appears in
the corner of the screen
This appears when you press and hold the EXIT button for a while. The product settings are reset to the
factory defaults.
The ‘Resets all settings to
the default values.’ message
appears.
This is part of the product’s design and is not a defect.
You may see small particles if
you look closely at the edge of
the bezel surrounding the TV
screen.
N
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢄ
¦
Specifications
Model Name
LAꢁꢁBꢂꢄ0
22 inch
Screen Size
(Diagonal)
PC Resolution
(Optimum)
1360 x 768 @ 60Hz
3W X 2
Sound
(Output)
Dimensions (WxDxH)
Without Stand
With stand
558 x 89 x 388 mm
558 x 203 x 425 mm
Weight
With Stand
4 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel
(Left / Right)
0˚
N
N
N
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - ꢁꢅ
|