SP-S4223
HP-S4233
HP-S5033
PLASMA DISPLAY
Owner’s
Instructions
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Download from Www.Somanuals.com. All Manuals Search And Download.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes
as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image
retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when
displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the PDP TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent
hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment
such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated
technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no
impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C (41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen.
Playing a DVD or a game console may cause similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial
after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
English-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
GENERAL INFORMATION
CHANNEL CONTROL
List of Features ..................................................................................
Accessories........................................................................................
Viewing the Control Panel..................................................................
Viewing the Connection Panel...........................................................
Remote Control..................................................................................
Installing Batteries in the Remote Control .........................................
5
5
6
7
8
9
Selecting the Antenna................................................................... 36
Adding and Erasing Channels...................................................... 36
To set-up Your Favorite Channels ............................................... 37
Viewing the Channel Lists ............................................................ 38
Setting the Default Channel List Mode......................................... 38
Labeling Channels ....................................................................... 39
Fine Tuning Analog Channels....................................................... 39
Checking the Digital-Signal Strength............................................ 40
LNA (Low Noise Amplifier)............................................................ 40
CONNECTIONS
Connecting VHF and UHF Antennas.................................................
9
Connecting Cable TV......................................................................... 10
Connecting a VCR ............................................................................. 11
Connecting an S-VHS VCR ............................................................... 11
Connecting a Camcorder................................................................... 12
Connecting a DVD Player/Set-Top Box ............................................. 12
Connecting a DVD Player/Set-Top Box via DVI ................................ 12
Connecting a DVD Player/Set-Top Box via HDMI ............................. 13
Connecting a Digital Audio System.................................................... 13
Connecting an Amplifier/DVD Home Theater .................................... 14
Connecting a PC................................................................................ 14
PC DISPLAY
Using Your TV as a Computer (PC) Display ................................ 41
Display Modes .............................................................................. 41
Setting up the TV with your PC.................................................... 42
TIME SETTING
Setting the Time............................................................................ 44
OPERATION
FUNCTION DESCRIPTION
Turning the TV On and Off ............................................................... 15
Plug & Play Feature........................................................................... 15
Changing Channels ........................................................................... 17
Adjusting the Volume ......................................................................... 18
Viewing the Display............................................................................ 18
Viewing the Menus............................................................................. 18
Memorizing the Channels .................................................................. 19
Setting Up Your Remote Control........................................................ 20
To Select the Source.......................................................................... 25
To Edit the Input Source Name.......................................................... 25
Selecting a Menu Language......................................................... 47
Using the Game Mode.................................................................. 47
Viewing Closed Captions (On-Screen Text Messages) - Digital .. 48
Viewing Closed Captions (On-Screen Text Messages) - Analog ... 49
Menu Transparency Level ............................................................ 50
Using the Energy Saving Feature ................................................ 50
Preventing Screen Burn-in ........................................................... 51
Reducing the Effects of Screen Burn ........................................... 52
Setting the Function Help ............................................................ 52
Using the V-Chip........................................................................... 53
PICTURE CONTROL
Using Automatic Picture Settings ................................................. 26
Digital Noise Reduction ................................................................ 27
Changing the Screen Size............................................................ 28
DNIe (Digital Natural Image engine) ............................................ 29
Selecting the Film Mode............................................................... 29
Setting the Blue Screen Mode...................................................... 29
Viewing Picture-in-Picture............................................................. 30
Freezing the Current Picture ........................................................ 31
APPENDIX
Identifying Problems .................................................................... 59
Wall Installation Instructions ......................................................... 60
How to assemble the Stand-Base................................................ 62
Specifications................................................................................ 62
Dimensions (SP-S4223/HP-S4233).............................................. 63
Dimensions (HP-S5033)............................................................... 64
SOUND CONTROL
Using Automatic Sound Settings .................................................. 32
Customizing the Sound ................................................................ 32
Setting the TruSurround XT.......................................................... 33
Choosing a Multi-Channel Sound (MTS) track - Digital .............. 33
Choosing a Multi-Channel Sound (MTS) track - Analog ............. 34
Automatic Volume Control ........................................................... 34
Selecting the Internal Mute........................................................... 35
Setting the On/Off Melody ............................................................ 35
Listening to the Sound of the Sub (PIP) Picture .......................... 35
➢
Symbol
Press
Important
Note
One-Touch
Button
English-4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
List of Features
ꢀ Adjustable picture settings that can be stored in the TV’s memory.
ꢀ Automatic timer to turn the TV on and off.
ꢀ A special sleep timer.
-
ꢀ V Chip function.
ꢀ Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed.
ꢀ Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.
ꢀ Excellent Picture Quality
-
DNIe technology provides life-like clear images.
ꢀ SRS TruSurround XT
-
SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your TV.
If any items are missing, contact your dealer.
Ferrite Core for
Side-AV
(3301-001305)
Remote Control
(BN59-00511A) /
AAA Batteries
Power Cord
(3903-000144)
Owner’s Instructions /
Quick Setup Guide
Warranty Card /
Registration Card /
Safety Guide Manual
(Not available in all locations)
Ferrite Core for
Power Cord
(3301-001110)
(4301-000103)
The following parts are sold separately and are available at most electronics stores.
S-VIDEO Cable
(BN39-00149A)
HDMI Cable
(BN39-00641A)
HDMI/DVI cable
(BN39-00643A)
Component Cables (RCA)
(BN39-00279A)
PC Cable
(BN39-00115A)
PC Audio Cable
(BN39-00061B)
Optical Cable
Coaxial Cable
(BN39-00110A)
Antenna Cable
(BN39-00333A)
➢
Ferrite Core (Power Cord, Audio/Video Cable,
S-Video Cable)
The ferrite cores are used to shield the cables
from interference.
When connecting a cable, open the ferrite core
and clip it around the cable near the plug.
English-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
Œ
´
SOURCE
Ø
POWER
Press to turn the TV on and off.
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, or HDMI2).
Power Indicator
Blinks and turns off when the power is on and lights up
in stand-by mode.
MENU
Press to see an on-screen menu of your TV’s features.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
ˇ + VOL –
Press to increase or decrease the volume.
∏
Speakers
In the on-screen menu, use the + VOL – buttons as
you would use the œ and √ buttons on the remote
control.
¨
ˆ
CH
Press to change channels.
In the on-screen menu, use the
you would use the … and † buttons on the remote
control.
CH
buttons as
(ENTER)
Press to confirm a selection.
English-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 9-14.
Œ
´
POWER IN
Connect the supplied power cord.
”
’
˝
Ô
PC AUDIO IN
Connect to the audio output jack on your PC.
HDMI IN 2
Connect to the HDMI jack of a device with
HDMI output.
PC IN
Connect to the video output jack on your PC.
SERVICE 1/SERVICE 2
These jacks are for service purposes only.
ˇ
HDMI 1/DVI IN
Connect to the HDMI jack of a device with HDMI output.
This input can also be used as a DVI connection with
separate analog audio inputs.
An optional HDMI/DVI cable will be necessary to make
this connection.
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device. (Not compatible
with PC)
AUDIO-L/R (AV IN 1)
Audio inputs for external devices, such as
a camcorder or VCR.
Ò
Ú
Æ
VIDEO (AV IN 1)
Video input for external devices, such as
a camcorder or VCR.
S-VIDEO (AV IN 1)
Video input for external devices with an
S-Video output, such as a camcorder or VCR.
¨
DVI IN (AUDIO-L/R)
Connect to the DVI audio output jack of an
external device.
COMPONENT IN 1, 2
Video (Y/PB/PR) and audio (L-AUDIO-R)
component inputs.
ˆ
Ø
∏
OPTICAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
AUDIO OUT (L/R)
Audio outputs for external devices.
COAXIAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
ANT 1 IN (CABLE)/ANT 2 IN (AIR)
75Ω Coaxial connector for Air/Cable
Network.
Side Panel Jacks
Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 12)
Œ
´
ˇ
S-VIDEO IN 2
S-Video input for external devices with an S-Video output.
AV IN 2
Video and audio inputs for external devices.
HEADPHONE
You can connect a set of headphones to your television if you wish to watch a television
program without disturbing other people in the room.
English-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
ΠPOWER
Turns the TV on and off.
¯ TV, DVD, STB, CABLE, VCR
Press to operate your TV,
DVD, STB, CABLE (box), or VCR.
´ NUMERIC BUTTONS
Press to change the channel.
˘ SOURCE
Press to display all of the available
video sources.
ˇ –
Press to select additional channels
(digital and analog) being broadcast by
the same station. For example, to
select channel “54-3”, press “54”, then
¿ PRE-CH
Tunes to the previous channel.
¸ FAV.CH
–
press “ ” and “3”.
Press to switch to your favorite channels.
¨ CH MGR
˛ E.SAVING
Used to display Channel Lists on the
screen.
Adjusts screen brightness to save energy.
◊
CH
ˆ ANTENNA
Press to change channels.
Press to select “AIR” or “CABLE”.
EXIT
Ø VCR/DVD Functions
Press to exit the menu.
- Rewind
≠ UP
/ DOWN
/ LEFT
/
- Stop
RIGHT / ENTER
Use to select on-screen menu items
and change menu values.
- Play/Pause
- Fast/Forward
∏
+ VOL –
Press to increase or decrease the
volume.
– INFO
Press to display information on the TV
screen.
” MUTE
Press to temporarily cut off the sound.
— SLEEP
Press to select a preset time interval for
automatic shut off.
’ MENU
Displays the main on-screen menu.
÷ STILL
˝ S.MODE
Press to select the sound mode.
Press to stop the action during a
particular scene.
Press again to resume normal video.
Ô PIP
Picture-in Picture ON/OFF.
® P.SIZE
Press to change the screen size.
P.MODE
Press to select the picture mode.
∑ SWAP
Switches the main and sub (PIP) picture.
Ò SRS
Selects SRS TruSurround XT mode.
µ CH
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
Ú MTS
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast).
¥ CAPTION
Controls the caption decoder.
Æ AUTO PROG.
≥ RESET
Press to automatically store selected
Air/Cable channels.
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds
before use.
ı ADD/DEL
Use to store and delete channels
to/from memory.
˜ SET
Sets the remote to control your
TV, VCR, Cable, DVD, or Set-Top Box.
➢ This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel and Volume buttons.
English-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
➢
➢
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
➢
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300
Ω
Flat Twin Leads”
below.
If your antenna has one lead that looks like this, see “Antennas with 75
If you have two antennas, see “Separate VHF and UHF Antennas”.
Ω
Round Leads”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300
Ω
twin flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75
(not supplied).
Ω
adapter
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT 1 IN (CABLE) terminal on the back of the TV.
ANT
1
IN (CALBE)
Antennas with 75 Ω Round Leads
1. Plug the antenna lead into the ANT 2 IN (AIR) terminal on the back of the TV.
ANT
2
IN (AIR)
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting
the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
UHF
VHF
2. Plug the combiner into the ANT 2 IN (AIR) terminal on the bottom of the back panel.
UHF
VHF
ANT
2
IN (AIR)
English-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
➢
ANT
1
IN (CALBE)
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
➢
ANT IN
ANT OUT
2. Connect the other end of this cable to the ANT 1 IN (CABLE) terminal on the back of the TV.
ANT
1
IN (CALBE)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way
splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
ANT IN
This terminal might be labeled “ANT IN”,
“VHF IN” or simply, “IN”.
➢
2. Connect this cable to a two-way splitter.
Incoming
cable
Splitter
3. Connect an Antenna cable between an
OUTPUT terminal on the splitter and the
IN terminal on the cable box.
Incoming
cable
Splitter
Cable Box
4. Connect an Antenna cable between the
ANT OUT terminal on the cable box and
the B–IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
6. Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and
the ANT 1 IN (CABLE) terminal on the rear
of the TV.
TV Rear
Incoming
cable
ANT 1 IN (CABLE)
Splitter
RF (A/B)
Switch
Cable Box
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled
channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
English-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on
pages 9-10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna
from the back of the TV.
2. Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3. Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
TV Rear Panel
VCR Rear Panel
ANT 1 IN (CABLE) or ANT 2
IN (AIR) terminal on the TV.
4. Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
[VIDEO] jack on the TV.
5. Connect Audio Cables
5
between the AUDIO OUT
Audio Cable (Not supplied)
jacks on the VCR and the
AV IN 1 [R-AUDIO-L] jacks
on the TV.
2
4
3
Video Cable (Not supplied)
Antenna Cable (Not supplied)
➢
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied) to
hook up to the right and left
audio input jacks of the TV.
If your VCR is stereo, you
must connect two cables.
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1. To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
TV Rear Panel
VCR Rear Panel
2. Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN 1 [S-VIDEO] jack on
the TV.
3
2
1
Audio Cable (Not supplied)
S-Video Cable (Not supplied)
3. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 1 [R-AUDIO-L] jacks
on the TV.
Antenna Cable (Not supplied)
An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)
➢
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Some games may be displayed with a cut off picture when the TV is connected to a game player.
English-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR
1. Connect a Video Cable
(or S-Video Cable) between
the AV IN 2 [VIDEO]
TV Side Panel
1
1
S-Video Cable (Not supplied)
Video Cable (Not supplied)
(or S-VIDEO) jack on the
TV and the VIDEO OUT
jack on the camcorder.
or
Camcorder
2
Audio Cable (Not supplied)
2. Connect Audio Cables
between the AV IN 2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Connecting a DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD player/Set-Top Box to your TV.
1. Connect a Component
Cable between the
TV Rear Panel
DVD Player / Set-Top Box
COMPONENT IN 1 [Y, PB,
PR] (or COMPONENT IN 2
[Y, PB, PR]) jacks on the TV
and the COMPONENT [Y,
PB, PR] jacks on the DVD
player/Set-Top Box.
2. Connect Audio Cables
between the COMPONENT
IN 1 [R-AUDIO-L](or
2
1
Audio Cable (Not supplied)
COMPONENT IN 2
[R-AUDIO-L]) jacks on the
TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.
Component Cable (Not supplied)
➢
Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red)
for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable to
COMPONENT IN also.
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI 1/DVI IN
jack on the TV and the
DVI jack on the DVD player/
Set-Top Box.
DVD Player / Set-Top Box
TV Rear Panel
2. Connect Audio Cables
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.
2
1
Audio Cable (Not supplied)
DVI to HDMI Cable (Not supplied)
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
English-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output jack on the external device.
1. Connect an HDMI Cable
between the [HDMI1/DVI IN]
or [HDMI IN 2] on the TV and
the HDMI OUT on the DVD
player/Set-Top Box or
TV Rear Panel
TV Rear Panel
DVD Player/Set-Top Box
connect a DVI to HDMI Cable
or DVI-HDMI Adapter
between the [HDMI1/DVI IN]
jack on the TV and the DVI
jack on the DVD player/Set-
Top Box.
Audio Cable
(Not supplied)
1
HDMI Cable (Not supplied)
If connecting via HDMI/DVI,
you must also connect audio
cables. Connect Audio
DVI to HDMI Cable (Not supplied)
What is HDMI?
Cables between the DVI IN
[L-AUDIO-R] jacks on the TV
and the AUDIO OUT jacks on
the DVD player/Set-Top Box.
•
HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of digital audio and video signals using a single cable without
compression.
•
“Multimedia interface” is a more accurate name for it especially because it allows
multiple channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi-channel digital audio.
➢
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio
cables when connecting via HDMI/DVI.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1. Connect an Optical or
Coaxial Cable between the
DIGITAL AUDIO OUT
Digital Audio System
(OPTICAL or COAXIAL)
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
TV Rear Panel
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL or COAXIAL)”
terminal:
Decrease the gain (volume)
of the TV, and adjust the
volume level with the
system’s volume control.
Optical Cable (Not supplied)
or
Coaxial cable (Not supplied)
What is OPTICAL?
•
Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF
is a transmission system of digital audio in the form of a light wave that uses a glass conductor.
What is COAXIAL:?
• The digital audio signal is received through a coaxial copper cable.
➢
➢
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each external input source device has a different back panel configuration.
English-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an Amplifier/DVD Home Theater
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV
and AUDIO IN [R-AUDIO-L]
on the Amplifier/DVD Home
Theater.
TV Rear Panel
Amplifier/DVD Home Theater
When an audio amplifier is
connected to the “AUDIO
OUT [R-AUDIO-L]”
terminals: Decrease the
gain (volume) of the TV,
and adjust the volume level
with the Amplifier’s volume
control.
Audio Cable (Not supplied)
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
Connecting a PC
1. Connect a D-Sub Cable
between PC IN [PC]
jack on the TV and the
PC output jack on your
computer.
TV Rear Panel
PC
2. Connect a PC Audio Cable
between PC IN [AUDIO]
jack on the TV and the
Audio Out jack of the sound
card on your computer.
2
1
PC Audio Cable (Not supplied)
D-Sub Cable (Not supplied)
➢
➢
➢
Each external input source device has a different back panel configuration.
When connecting an external device, match the color of the connection terminal to the cable.
The HDMI/DVI jacks do not support PC connection.
Audio Out (Optical, Coaxial, L/R Out)
Internal Speakers
AV, S-Video
Speaker Output
Mute
TV
Internal Mute Off Speaker Output
Component, PC, HDMI
Speaker Output
Mute
TV
AV, S-Video
Component, PC, HDMI
Sound Output
Sound Output
Mute
Sound Output
Sound Output
Mute
Sound Output
Sound Output
Mute
Internal Mute On
Video No Signal
Mute
Mute
Mute
Mute
When “Internal Mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted.
English-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed.
Press the ENTER button, then “Select the language of the OSD” menu is
Menu language, Channels
and Time will be set.
i
automatically displayed.
Start
2. Press the ENTER button to enter the language.
Plug & Play
Press the … or † button to select language, then press the ENTER button.
“Select the antennas to memorize.” menu is automatically displayed.
Select the language of the OSD.
Menu Language
:
English
Spanish
French
Move
Enter
Skip
Skip
Skip
Plug & Play
3. Press the … or † button to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
Select the antennas to memorize.
➢
If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected to
ANT 1 IN (CABLE), select “Cable”.
Air
Start
Start
Start
Cable
➢
➢
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the “Air + Cable”.
Air + Cable
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the … or † button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Move
Enter
Plug & Play
Select the cable system.
STD
HRC
IRC
Move
Enter
Continued...
English-15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
“Clock Mode” menu is automatically displayed.
Plug & Play
Auto Program in progress.
Cable Channel 67
➢
To stop the search before it has finished, press the ENTER button with Stop selected.
Stop
Enter
Skip
Plug & Play
Auto Program is completed.
14 Channels were memorized.
Air : 9 , Cable : 5.
OK
Enter
Skip
Plug & Play
5. Press the ENTER button.
Press the … or † button to select “Manual” for setting the current time manually,
then press the ENTER button. “Set current date and time.” is displayed.
Select the clock mode.
Clock Mode
:
Manual
Auto
➢
If you select “Auto”, “Set to daylight savings time.” is displayed, then go to
step 8.
Move
Enter
Skip
Clock Set
6. Press the œ or √ button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,
or “am/pm”. Set the date and time you want by pressing the … or † button, then
press the MENU button.
Set current date and time.
Month
Day
--
Year
----
…
--
➢
You can set the month, day, year, hour and minute directly by pressing the
number buttons on the remote control.
†
Hour
--
Minute am/pm
--
--
Move
Adjust
Enter
Skip
7. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
Enjoy your watching.
OK
i
➢
Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
Setting the Clock Automatically
Plug & Play
8. Press the ENTER button.
Press the … or † button to select “No” or “Yes”, then the ENTER button.
“Select the time zone in which you live.” menu is automatically displayed.
Set to daylight savings time.
Daylight Savings Time
:
No
Yes
Move
Enter
Plug & Play
Skip
9. Press the … or † button to highlight the time zone for your local area (and to
move the highlight to the appropriate time zone on the map of the United States).
Press the ENTER button.
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
If not, see page 44 to set the clock.
Central
Mountain
Pacific
Alaska
Hawaii
Move
Enter
Skip
10. The message “Enjoy your watching.” is displayed.
When you have finished,press the ENTER button.
Enjoy your watching.
OK
i
➢
Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
English-16
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to reset this feature...
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Return
2. Press the ENTER button to select “Plug & Play”.
For further details on setting up options, refer to the page 15~16.
Menu language, Channels
and Time will be set.
i
➢
Plug & Play can only be accessed in the TV mode.
Start
Changing Channels
Using the Channel Buttons
1. Press the CH
or CH
button to change channels.
or CH button, the TV changes channels in sequence.
➢
When you press the CH
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 19 to memorize channels.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
1. Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2,” then “7.”
The TV will change channels when you press the second number.
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal.
1. For example, for Channel 7-1 (digital), press “7”, then “-”, then “1”.
For channel 7-2 (analog), press “7”, then “-”, then “2”.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
➢
➢
For quick channel change, press the number buttons, then press the ENTER button.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
➢
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
English-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Volume
1. Press the VOL + or VOL – button to increase or decrease the volume.
Using the Mute Button
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE button again, or simply press the
VOL + or VOL – button.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1. Press the INFO button on the remote control.
Air 28
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
12 : 00 am
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
Viewing the Menus
T V
Input
1. With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Input, Picture, Sound, Channel, Setup.
Source List
Edit Name
: TV
√
√
2. Use the … or † button to select one of the five icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
Move
Enter
Return
The on-screen menus disappear from the screen after a few seconds.
➢
English-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels.
After the available channels are memorized, use the CH
or CH
button to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an air or a cable system).
T V
Channel
: Air
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
√
√
√
√
√
√
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
†
More
Move
Enter
Return
2. Press the ENTER button select “Antenna”.
T V
Channel
Press the … or † button to select “Air” or “Cable”, then press the ENTER button.
Air
Antenna
:
Cable
Auto Program
Channel Manager
Name
Press the EXIT button to exit.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
Storing Channels in Memory (Automatic Method)
T V
T V
T V
Channel
: Air
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
√
√
√
√
√
√
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Auto Program”, then press the ENTER button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
Return
Return
3. Press the … or † button to select the antenna connection, then press the
Auto Program
ENTER button.
Select the antennas to memorize.
➢
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Air+Cable: “Air” and “Cable” antenna signals.
Air
Start
Start
Start
Cable
Air + Cable
➢
If the antenna is connected to ANT 1 IN (CABLE), select “Cable” and if it is connected to
ANT 2 IN (AIR), select “Air”.
➢
➢
If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.
Move
Enter
Auto Program
If you selected “Air”, then go to step
5.
4. Select the correct signal source (STD, HRC, and IRC) by pressing the … or †
button, then press the ENTER button.
Select the cable system.
➢
STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
STD
HRC
IRC
Move
Enter
Auto Program
5. The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
Auto Program in progress.
Cable Channel 67
➢
The TV must be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel
directly by using the number buttons on the remote control.
Stop
Enter
Return
➢
• All available DTV and analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
You can also press the AUTO PROG. button on the remote control to bring up the Auto
Program menu.
English-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
➢
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the VCR button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the VCR code listed on
page 22 of this manual for your brand of VCR. Make sure you enter three digits of the code,
even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control. Your VCR should turn on if your remote is
set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1. Turn off your cable box.
2. Press the CABLE button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 23 of this manual for your brand of cable box. Make sure you enter three digits
of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other
codes listed for your brand of cable box. If no other codes are listed, try each code,
000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume.
Continued...
English-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD code listed on
page 24 of this manual for your brand of DVD. Make sure you enter three digits of the code,
even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Set Top Box
1. Turn off your STB.
2. Press the STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the STB code listed on
page 23 of this manual for your brand of STB. Make sure you enter three digits of the code, even
if the first digit is a “0”. (If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes
listed for your brand of STB. If no other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: STB
When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.
Continued...
English-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Codes
VCR
Brand
Code
Brand
Code
SAMSUNG
ADMIRAL
AIWA
000 001 002 003 004 005 077 078 079
020
025
MITSUBISHI
MONTGOMERY WARD 020
MTC
019 034 041 046
002 025
AKAI
004 027 032
007 026
018
022
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
002 003 006 008 015 055
CANON
021 056
PENTEX RESEARCH+ 008
CITIZEN
002 003 006 008 015 055
PHILCO
021 056 059
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
007
002 024
PHILIPS
021 080
019 026 039 053
015 049 055
017
018
021 056
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040 047 050
052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
RADIO SHACK/REALISTIC 006 018 020 021 024 025 029 034 048 056
RCA
SANSUI
SANYO
SCOTT
SEARS
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
FISHER
FUNAI
006 018 019 024 028 029 041 048 051
GENERAL ELECTRIC 002 005 017 021 056
SHARP
020 034 045 015
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
002
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
007 008 018 026 037
070
KENWOOD
KLH
025 037 068
LIOYD
LOGIK
LXI
025
038
025
TECHNICS
TEKNIKA
TMK
021
006 021 025 031
066
JVC
081 082 083
021 056 059
007 008 018 021 026 037 062
006
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
003 019 029 051 052
002 006
002
007 026
MAGNAVOX
MARANTZ
MARTA
KONIA
036
026
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
073 074 075 076
021
006 021 024 025
034
005
019 041 075
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
Continued...
English-22
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE BOX
Brand
Code
Code
Brand
SAMSUNG
GI
000 001 002 003 004 005 006 007
041
015 023
042 043
REGENCY
SA
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
003 024 031
025 030
038 039
025 030
019 023 028
026
042 043
022
036
016
016
032
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
PANASONIC
PHILIPS
PIONEER
RCA
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
033 034
019 021 023 028
046
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
017 029 035 037 045
REGAL
SAMSUNG SET-TOP BOX
Product
Code
001 002
003
004
008
Code
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard 009
010
011
012
013
014
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
SET-TOP BOX
Code
Brand
Code
Brand
023
043
018 034
019
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
044 073
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039 040 041 042 067
046 049 050 063
058 059 061 062
016
035
015 016 017 019 022 045 060 061 062 065 066 067
068
074
069 070
069
018 024 032
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
PRIMESTAR
PANASONIC
PAYSAT
027
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
065 066
051 052 053 065 066
064
057
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
025 069 070 071
069
069
065
GE
020 027
046 047 048 063 064
069
GENERAL INSTRUMENT
HTS
026
031
STAR TRAK
SKY
056
022
HOME CABLE
HITACHI
005 006 007
064
SKY LIFE
SHACK
015 017
020
HUGHES NETWORK
IQ
064
054 060
STAR CHOICE
SONY
020
059
063
069 070
IQ PRISM
JANEIL
JERROID
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
TOSHIBA
ULTIMATE TV
UNIDEN
JVC
ZENITH
Continued...
English-23
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
Code
014 015 016
017
018
019
Product
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
020
021
013
AV Receiver
DVD
Code
Brand
Code
Brand
030
075
085
072
ANAM
048 049 050
052
053
144
074
105
072
076 092 119
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
070 071 074 086 083 084 088 111 112
114
062
074
122 123
044 045
PHILCO
027
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
046 047
023
024 034 124 134 136 137 138
036 076
PRINCETON
PROSCAN
PANASONIC
PHILIPS
065 077 078 079 082
080 125
081
095
066
146
CINEVISION
DAEWOO
DENON
117 118
120
023 035 074 075 131 132
ROTEL
RIO
RCA
067 068
090
FARENHEIT
FISHER
073
038
RAITE
ROWA
060
GPX
104
SAMPO
061 089 133 135
069 074
074
064 113
071
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
073
091 110
089
092
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
062
094
090
145
028 062 076
139
072
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
091
022 033 115 116
073
051 108 109
073
KENWOOD
KISS
073
TOKAI
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
096
097
098 099 101
076
075
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
102
032 063
040 073
103
076 121
ZENITH
MONYKA
English-24
Download from Www.Somanuals.com. All Manuals Search And Download.
To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
T V
Input
: TV
1. Press the MENU button to display the menu.
Press the ENTER button to select “Input”.
Source List
Edit Name
√
√
2. Press the ENTER button to select “Source List”.
Press the … or † button to select signal source, then press the ENTER button.
➢
You can choose between the following sets of jacks: AV1, S-Video1, Component1,
Component2, PC, HDMI1, or HDMI2 on the TV’s rear panel and AV2 or S-Video2
on the TV’s side panel.
Move
Enter
Return
➢
➢
HDMI1 or HDMI2 input can only be selected when the external device is turned on and
connected via HDMI.
You can choose only those external devices that are connected to the TV.
T V
Source List
TV
AV1
AV2
:
:
:
:
:
----
----
----
----
----
S-Video1
S-Video2
Component1
†
More
Move
Enter
Return
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
T V
Input
: TV
Press the ENTER button to select “Input”.
Press the … or † button to select “Edit Name”, then press the ENTER button.
Source List
Edit Name
√
√
Move
Enter
Return
T V
Edit Name
2. Press the … or † button to select “AV1”, “AV2”, “S-Video1”, “S-Video2”,
“Component1”, “Component2”, “PC”, “HDMI1” or “HDMI2” input jack,
then press the ENTER button.
AV1
AV2
:
:
:
:
:
----
----
----
----
----
√
√
√
√
√
S-Video1
S-Video2
Component1
†
More
Move
Enter
Return
Return
Return
3. Press the … or † button to select “VCR”, “DVD”, “D-VHS”, “Cable STB”,
“HD STB”, “Satellite STB”, “PVR STB”, “AV Receiver”, “DVD Receiver”,
“Game”, “Camcorder”, “DVD Combo”, “PC”, “VOD STB”, or “TV” input source,
then press the ENTER button.
T V
Edit Name
----
VCR
AV1
AV2
:
:
:
:
:
DVD
S-Video1
S-Video2
Component1
D-VHS
Cable STB
HD STB
Press the EXIT button to exit.
Satellite STB
†
More
PVR STB
†
Move
Enter
T V
Edit Name
†
AV Receiver
DVD Receiver
Game
Camcorder
DVD Combo
PC
VOD STB
TV
AV1
AV2
:
:
:
:
:
S-Video1
S-Video2
Component1
†
More
Move
Enter
English-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
1. Press the MENU button to display the menu.
T V
Picture
: Dynamic
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
Return
T V
Mode
: Dynamic
2. Press the ENTER button to select “Mode”.
Mode
Press the ENTER button again.
Press the … or † button to select the “Dynamic”, “Standard”, “Movie”,
or “Custom” picture setting, then press the ENTER button.
Contrast
Brightness
Sharpness
Color
Standard
Movie
Custom
55
ꢀ Choose Dynamic to increase the clarity and sharpness of the picture.
ꢀ Choose Standard for the standard factory settings.
ꢀ Choose Movie when watching movies.
Tint
Color Tone
Reset
G 50
R 50
: Cool1
Move
Enter
Return
ꢀ Choose Custom if you want to adjust the settings according to personal preference.
➢
Picture mode needs to be adjusted separately for each input.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3. Press the … or † button to select “Contrast”, “Brightness”, “Sharpness”,
T V
Mode
“Color”, or “Tint”, then press the ENTER button.
Mode
: Dynamic
Contrast
Brightness
Sharpness
Color
100
45
75
55
Tint
Color Tone
Reset
G 50
R 50
: Cool1
Move
Enter
Return
100
4. Press the œ or √ button to decrease or increase the value of a particular item.
Contrast
Press the ENTER button.
➢
• “Tint” doesn’t operate in PC, HDMI or any Component mode.
• In PC mode, only the Contrast and Brightness can be selected.
• The Tint cannot be adjusted while watching Digital TV.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, or Tint.
OSD color will also be adjusted accordingly.
Continued...
English-26
Download from Www.Somanuals.com. All Manuals Search And Download.
T V
Mode
: Dynamic
100
5. Press the ENTER button to return to “Mode”.
Mode
√
√
6. Press the … or † button to select “Color Tone”, then press the ENTER button.
Contrast
Brightness
Sharpness
Color
Tint
Color Tone
Reset
45
75
55
G 50
R 50
: Cool1
Move
Enter
Return
T V
Mode
7. Press the … or † button to select “Cool2”, “Cool1”, “Normal”, “Warm1”,
or “Warm2”, then press the ENTER button.
Mode
: Dynamic
Contrast
Brightness
Sharpness
Color
100
Cool2
Cool1
Normal
Tint
Color Tone
Reset
G 50
Warm1
Warm2
:
Move
Enter
Return
Resetting the Picture Settings to the Factory Defaults
8. Press the … or † button to select “Reset”, then press the ENTER button.
Press the EXIT button to exit.
T V
Mode
Mode
: Dynamic
100
√
Contrast
Brightness
Sharpness
Color
45
75
55
➢
Each picture mode can be reset.
Tint
G 50
R 50
Color Tone
Reset
: Cool1
√
Move
Enter
Return
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
T V
Picture
1. Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
: Dynamic
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
2. Press the … or † button to select “Digital NR”, then press the ENTER button.
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
Return
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
T V
Picture
: Dynamic
Mode
Size
Press the EXIT button to exit.
: 16:9
: Off
: On
: Off
: Off
Digital NR
DNIe
Film Mode
Blue Screen
PIP
➢
The Digital NR function is available in all modes except PC.
Move
Enter
Return
English-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Screen Size
Screen size selection depends on the type of video input.
1. Press the MENU button to display the menu.
T V
Picture
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
: Dynamic
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
2. Press the … or † button to select “Size”, then press the ENTER button.
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
Return
3. Press the … or † button to select the screen format you want.
T V
Size
Press the ENTER button.
16:9
Press the EXIT button to exit.
Zoom1
Zoom2
4:3
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 : Expands the Zoom1 format picture.
• 4:3 : Sets the picture to 4:3 normal mode.
Move
Enter
Return
Press the P.SIZE button on the remote control to change the picture size.
➢
If you watch a still image or the 4:3 (Normal) mode for a long time (over 2 hours), an image may be burned
onto the screen. View the TV in 16:9 (Wide) mode as much as possible.
16:9
Zoom1
Sets the picture to 16:9 wide mode.
The screen size when Wide screen is
vertically enlarged.
4:3
Zoom2
Sets the picture to 4:3 normal mode.
The screen size when the Zoom1 screen is
vertically enlarged.
➢
• In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen modes can be selected.
16:9 Zoom1 Zoom2 4:3
(
➞
➞
➞
)
• In TV(DTV), COMPONENT(720p, 1080i), PC, HDMI(720p, 1080i) modes, only 16:9 & 4:3 modes can be selected.
• In Zoom1 and Zoom2 modes, you can move the picture on screen by pressing the … or † button.
• You can not change the picture size when PIP is set to Double.
English-28
Download from Www.Somanuals.com. All Manuals Search And Download.
DNIe (Digital Natural Image engine)
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to Demo, you can view the applied DNIe and
normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
T V
Picture
1. Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
: Dynamic
: 16:9
: On
√
√
√
√
√
√
2. Press the … or † button to select “DNIe”, then press the ENTER button.
Digital NR
DNIe
Film Mode
Blue Screen
PIP
:
On
➢
This function doesn’t work when the Input Source is PC.
: Off
: Off
Move
Enter
Return
3. Press the … or † button to select “Off”, “Demo” or “On”, then press the ENTER
button.
T V
Picture
: Dynamic
Press the EXIT button to exit.
Mode
Size
: 16:9
: On
Digital NR
DNIe
Film Mode
Blue Screen
PIP
• Off: Switches off the DNIe mode.
• Demo: The screen before applying DNIe appears on the left and the screen after
applying DNIe appears on the right.
:
:
:
O
f
f
mo
De
On
• On: Switches on the DNIe mode.
Move
Enter
Return
➢
The DNle function is not supported in the Movie mode. (It is inactivated.)
Selecting the Film Mode
Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality.
T V
Picture
: Dynamic
1. Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
2. Press the … or † button to select “Film Mode”, then press the ENTER button.
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
Return
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
T V
Picture
: Dynamic
Mode
Size
Digital NR
DNIe
Press the EXIT button to exit.
: 16:9
: On
: On
Film Mode
Blue Screen
PIP
: Off
: On
Move
Enter
Return
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
T V
Picture
1. Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
Mode
Size
: Dynamic
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
2. Press the … or † button to select “Blue Screen”, then press the ENTER button.
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
Return
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
T V
Picture
: Dynamic
Mode
Size
Press the EXIT button to exit.
: 16:9
: On
: On
: Off
: Off
On
Digital NR
DNIe
Film Mode
Blue Screen
PIP
➢
Blue Screen is displayed when there is no signal from an external device, regardless of the
Blue Screen Setting.
Move
Enter
Return
English-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’ below for details. You can use the PIP feature
to simultaneously watch two video sources. (See page 35 to select the PIP picture sound.)
➢
While V-Chip is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
T V
Picture
: Dynamic
1. Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
Press the … or † button to select “PIP”, then press the ENTER button.
Mode
Size
√
√
√
√
√
√
: 16:9
: On
: On
: Off
: Off
Digital NR
DNIe
Film Mode
Blue Screen
PIP
Move
Enter
PIP
: OOff
Return
T V
2. Press the ENTER button again.
Press the … or † button to select “On”, then press the ENTER button.
PIP
On
: T
Source
Swap
Size
➢
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window
will disappear.
:
Position
Channel
:
: Air 3
Move
Enter
Return
Press the PIP button on the remote control to activate or deactivate the PIP.
A : Analog
D : Digital
O : PIP and swap operate
X : PIP doesn’t operate
PIP Settings
TV
X
PIP screen
AV1(A)
S-Video(A)
Component(A)
PC
HDMI(D)
Digital
(ATSC)
Analog
Main screen
Analog
X
X
X
X
X
O
X
TV
Digital
(ATSC)
O
O
O
X
X
X
O
O
O
O
O
X
X
AV1(A)
X
X
X
O
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
X
O
O
O
X
X
S-Video(A)
Component(A)
PC
HDMI(D)
➢
• This TV has only one tuner and does not allow you to watch one TV channel in the main screen and another
channel in the PIP screen.
Selecting a Signal Source (External A/V) for PIP.
T V
PIP
3. Press the … or † button to select “Source”, then press the ENTER button.
Select the source of the sub picture (PIP) by pressing the … or † button,
then press the ENTER button.
TV
:
PIP
AV1
:
AV2
Source
Swap
Size
Position
Channel
S-Video1
:
:
➢
➢
The sub picture can serve different source selections based on what the main picture is set to.
In the PIP Source menu, ‘TV’ represents both analog and digital tuning.
S-Video2
Component1
: Component2
HDMI1
HDMI2
Move
Enter
Return
Continued...
English-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Swapping the Contents of the PIP and Main Picture
T V
PIP
4. Press the … or † button to select “Swap”, then press the ENTER button.
The image in the PIP window will appear on the main picture, and vice versa.
(Refer to page 30)
PIP
: On
: TV
√
√
Source
Swap
Size
Position
Channel
:
:
√
√
√
➢
If main picture is in PC mode, Swap is not available.
: Air 3
Move
Enter
Return
Press the SWAP button on the remote control to interchange the main picture and the
sub picture.
Changing the Size of the PIP Window
T V
PIP
5. Press the … or † button to select “Size”, then press the ENTER button.
Press the … or † button to select the desired size of the PIP window, then press
the ENTER button.
PIP
: On
: TV
Source
Swap
Size
Position
Channel
:
:
➢
➢
If main picture is in PC mode, Size is not available.
: A3
You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main picture to view a game or karaoke.
Move
Enter
Return
Changing the Position of the PIP Window
T V
PIP
6. Press the … or † button to select “Position”, then press the ENTER button.
Press the … or † button to select the desired PIP window position, then press the
ENTER button.
PIP
: On
: TV
Source
Swap
Size
Position
Channel
:
:
➢
In Double Window (
) and Double Wide (
) modes, Position cannot be selected.
:
Move
Enter
Return
Changing the PIP Channel
T V
PIP
7. Press the … or † button to select “Channel”, then press the ENTER button.
Press the … or † button at the bottom of the remote to select the desired channel
in the PIP window, then press the ENTER button.
PIP
: On
: TV
Source
Swap
Size
Position
Channel
:
:
➢
The channel can be active when the sub picture is set to TV.
▲
: Air3
▲
Press the EXIT button to exit.
Move
Enter
Return
Press the PIP CH
and
buttons on the remote control to change the PIP channel.
Freezing the Current Picture
1. Press the STILL button to freeze a moving picture.
➢
➢
Normal sound will still be heard. Press again to cancel.
This function will automatically cancel five minutes later.
English-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control
Using Automatic Sound Settings
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and “Custom”) that are preset at the factory.
Or, you can select “Custom”, which automatically recalls your personalized sound settings.
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
Standard
Music
Mode
Equalizer
: C
2. Press the ENTER button to select “Mode”.
Movie
:
SRS TruSurround XT
Multi-Track Options
Auto Volume
Internal Mute
Speech
Custom
Press the … or † button to select “Standard”, “Music”, “Movie”, “Speech”,
or “Custom” sound setting, then press the ENTER button.
: Off
: Off
†
More
Press the EXIT button to exit.
Move
Enter
Return
• Choose Standard for the standard factory settings.
• Choose Music when watching music videos or concerts.
• Choose Movie when watching movies.
• Choose Speech when watching a show that is mostly dialog (i.e., news).
• Choose Custom to recall your personalized settings (see “Customizing the Sound”).
Press the S.MODE button on the remote control to select one of the standard sound
settings.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the “automatic” settings.)
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
√
√
√
√
√
√
2. Press the … or † button to select “Equalizer”, then press the ENTER button.
: Off
: Off
Internal Mute
†
More
Move
Enter
Equalizer
Return
3. Press the œ or √ button to select a particular frequency to adjust.
Press the … or † button to increase or decrease the level of the particular frequency,
then press the ENTER button.
T V
+
0
-
+
0
-
R
Press the EXIT button to exit.
➢
➢
• L/R Sound Balance Adjustment: To adjust the sound balance of the L/R speakers.
• Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)
: To adjust the level of different bandwidth frequencies.
L
100Hz 300Hz 1KHz 3KHz 10KHz
Balance
Move
Adjust
Return
If you make any changes to the equalizer settings, the sound mode is automatically
switched to the “Custom” mode.
Resetting the Equalizar Settings to the Factory Defaults
T V
Sound
…
More
To operate the Reset function, the Game mode must be set to On. (Refer to page 47)
Melody
Sound Select
Reset
: On
: Main
√
√
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
2. Press the … or † button to select “Reset”, then press the ENTER button.
➢
The equalizer resets to the factory defaults.
Move
Enter
Return
Press the EXIT button to exit.
English-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu.
T V
Sound
Press the … or † button to select “Sound”, then press the ENTER button.
Mode
: Custom
Equalizer
2. Press the … or † button to select “SRS TruSurround XT”, then press the
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Off
On
: Off
: Off
ENTER button.
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
Internal Mute
†
More
Press the EXIT button to exit.
Move
Enter
Return
Press the SRS button on the remote control to select “On” or “Off”.
TRADEMARK & LABEL LICENSE NOTICE
TruSurround XT, SRS and
Symbol are trademarks of
SRS Labs, Inc.
TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
Choosing a Multi-Channel Sound (MTS) track - Digital
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations
of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
Preferred Language
T V
Sound
1. Press the MENU button to display the menu.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
√
√
√
√
√
√
Press the … or † button to select “Sound”, then press the ENTER button.
: Off
: Off
Internal Mute
†
More
Move
Enter
Return
2. Press the … or † button to select “Multi-Track Options”, then press the ENTER button.
T V
Multi-Track Options
English
:
Preferred Language
Multi-Track Sound
Spanish
:
3. Press the ENTER button to select “Preferred Language”.
Press the … or † button to choose the language (English, Spanish or French)
you want, then press the ENTER button.
French
Press the EXIT button to exit.
➢
You can only select the language from among the actual languages being broadcast.
Move
Enter
Return
Press the MTS button on the remote control to listen in a language other than the
preferred language.
English-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Multi-Channel Sound (MTS) track - Analog
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
Multi-Track Sound
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
√
√
√
√
√
√
2. Press the … or † button to select “Multi-Track Options”, then press the ENTER
button.
: Off
: Off
Internal Mute
†
More
Move
Enter
Return
3. Press the … or † button to select “Multi-Track Sound”, then press the ENTER button.
T V
Multi-Track Options
Press the … or † button to select a setting you want, then press the ENTER button.
Preferred Language : English
Multi-Track Sound
: Mono
Stereo
SAP
Press the EXIT button to exit.
• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty
receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language
translation.
Move
Enter
Return
Press the MTS buttons on the remote control to select “Mono”, “Stereo”, or “SAP”.
Automatic Volume Control
Reduces the difference in volume level among broadcasters.
T V
Sound
1. Press the MENU button to display the menu.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
√
√
√
√
√
√
Press the … or † button to select “Sound”, then press the ENTER button.
2. Press the … or † button to select “Auto Volume”, then press the ENTER button.
: Off
: Off
Internal Mute
†
More
Move
Enter
Sound
Return
T V
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
Press the EXIT button to exit.
: Off
: On
Internal Mute
†
More
Move
Enter
Return
English-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Internal Mute
Sound output from the TV speakers is muted. This is useful when you want to listen to audio through your sound system instead of the TV.
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
√
√
√
√
√
√
2. Press the … or † button to select “Internal Mute”, then press the ENTER button.
: Off
: Off
Internal Mute
†
More
Move
Enter
Sound
Return
T V
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
Mode
Equalizer
SRS TruSurround XT
Multi-Track Options
Auto Volume
: Custom
: Off
Press the EXIT button to exit.
➢
• When Internal Mute is set to “On”, Sound menus except Multi-track Options cannot be
adjusted.
: Off
: Off
On
• The left/right audio outputs and digital audio outputs (Optical, Coaxial) remain enabled.
• The VOL +, VOL - and MUTE buttons do not operate when the Internal Mute is set to On.
• When Internal Mute is On, only MTS is selectable for the Sound.
Internal Mute
†
More
Move
Enter
Return
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
More
Melody
Sound Select
Reset
: On
: Main
√
√
2. Press the … or † button to select “Melody”, then press the ENTER button.
Move
Enter
Sound
Return
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
T V
…
More
Press the EXIT button to exit.
Melody
Sound Select
Reset
: Off
: On
Move
Enter
Return
Listening to the Sound of the Sub (PIP) Picture
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
T V
Sound
1. Press the MENU button to display the menu.
Press the … or † button to select “Sound”, then press the ENTER button.
More
Melody
Sound Select
Reset
: On
: Main
√
√
2. Press the … or † button to select “Sound Select”, then press the ENTER button.
Move
Enter
Sound
Return
3. Press the … or † button to select “Sub”, then press the ENTER button.
T V
…
More
Press the EXIT button to exit.
Melody
: On
Sound Select
Reset
:
Main
Sub
ꢀ Main: Used to listen to the sound of the main picture.
ꢀ Sub: Used to listen to the sound of the sub picture.
You can select this option when “PIP” is set to “On”.
➢
Move
Enter
Return
English-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Control
Selecting the Antenna
T V
Channel
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Air
Cable
Antenna
:
Auto Program
Channel Manager
Name
2. Press the ENTER button to select “Antenna”.
Press the … or † button to select “Air” or “Cable”, then press the ENTER button.
Fine Tune
Signal Strength
More
Press the EXIT button to exit.
†
Move
Enter
Return
Press the ANTENNA button on the remote control to select Air or Cable.
➢
➢
If the antenna is connected to ANT 2 IN (AIR),
select “Air” and if it is connected to ANT 1 IN (CABLE),
select “Cable”.
or
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are
connected, select the antenna input you want. If the antenna
input is not selected properly, noise may appear on the screen.
Adding and Erasing Channels
You can add or delete a channel to display the channels you want only.
To use the Channel Manager function, first run Auto Program (see page 19).
T V
Channel
: Air
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
√
√
√
√
√
√
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Channel Manager”, then press the
ENTER button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
3. Press the … or † button to select “Added”, then press the
T V
Channel Manager
ENTER button.
All
Added
Favorite
√
√
√
√
Default List mode
: All
Move
Enter
Return
Channel Manager /Added
4. Press the … / † / œ / √ buttons to select a channel to delete, then press the
Air 2
Air 2
ENTER button.
Air 18
Air 10
Air 11
Air 12
Air 13
Air 14
Air 15
Air 16
Air 17
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
Press the … or † button to select “Delete”, then press the ENTER button to
delete the channel.
Press the MENU button to return.
List Mode
Delete All
Move
Page
Enter
Return
Channel Manager /Added
Air 2
Air 2
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
Air 18
Watch
Add
Delete
Favorite
Air 14
Air 15
Air 16
Air 17
Continued...
List Mode
Enter
Delete All
Return
Move
English-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Manager /Added
5. Press the … / † / œ / √ buttons to select a channel to add,
Air 2
Air 2
then press the ENTER button.
Air 18
Watch
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
Add
Delete
Press the … or † button to select “Add”, then press the ENTER button to
add the channel.
Favorite
Air 14
Air 15
Air 16
Air 17
Press the EXIT button to exit.
List Mode
Enter
Add All
Delete All
Return
➢
All added channels will be shown on “Added” menu.
Move
• Red (P.MODE) button: Press repeatedly to select “All”, “Added”, or “Favorite”.
• Green (S.MODE) button: Press to add all channels deleted.
• Yellow (P.SIZE) button: Press to delete all channels memorized.
Press the ADD/DEL button on the remote control.
Press the CH
and CH
button to select the channel to be added or deleted,
then press the ENTER button.
To set-up Your Favorite Channels
You can set channels you watch frequently as favorites.
T V
Channel
: Air
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
√
√
√
√
√
√
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Channel Manager”, then press the ENTER button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
T V
Channel Manager
3. Press the … or † button to select “All” or “Added”, then press the ENTER button.
All
Added
Favorite
√
√
√
√
Default List mode
: All
Move
Enter
Return
Channel Manager /All
4. Press the … / † / œ / √ buttons to select a channel as a favorite channel,
Air 2
Air 2
then press the ENTER button.
Air 18
Air 10
Air 11
Air 12
Air 13
Air 14
Air 15
Air 16
Air 17
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
Press the CH
and CH
button to display the next channel list page.
Add All
Page
List Mode
Enter
Delete All
Move
Return
Channel Manager /All
5. Press the … or † button to select “Favorite”, then press the ENTER button.
The " " symbol will be highlighted and the channel will be set as a Favorite.
To cancel your Favorite channel selection, press the ENTER button until the
Air 2
Air 2
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
Air 18
Watch
Add
Delete
"
" symbol disappears.
Favorite
Air 14
Air 15
Air 16
Air 17
Press the EXIT button to exit.
➢
➢
Only memorized channels can be set as favorite channels.
All favorite channels will be shown on “Favorite” menu.
List Mode
Enter
Add All
Delete All
Return
Move
To select the favorite channels you have set up, press the FAV.CH button on the remote
control.
English-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Channel Lists
You can display a list of all channels, added channels or your favorite channels.
T V
Channel
: Air
1. Press the MENU button to display the menu.
Antenna
√
√
√
√
√
√
Press the … or † button to select “Channel”, then press the ENTER button.
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Channel Manager”, then press the ENTER
button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
3. Press the … or † button to select “All”, “Added” or “Favorite”, then press the
T V
Channel Manager
ENTER button.
All
Added
Favorite
√
√
√
√
To toggle between your all channels, add channels, or favorite channels,
use the red (P.MODE) button on the remote control.
Default List mode
: All
• Red (P.MODE) button: Press repeatedly to select “All”, “Added”, or “Favorite”.
• Yellow (STILL) button: Press to delete all channels memorized.
Move
Enter
Return
Channel Manager /All
Air 5
Air 2
Air 18
Air 10
Air 11
Air 12
Air 13
Air 14
Air 15
Air 16
Air 17
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
Air 9
List Mode
Enter
Add All
Page
Delete All
Return
Move
Setting the Default Channel List Mode
You can set All, Added, or Favorite to be the Default List that appears when you press the CH. MGR button.
T V
Channel
: Air
1. Press the MENU button to display the menu.
Antenna
√
√
√
√
√
√
Press the … or † button to select “Channel”, then press the ENTER button.
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Channel Manager”, then press the ENTER
button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
T V
Channel Manager
3. Press the … or † button to select “Default List mode”, then press the ENTER
All
Added
Favorite
button.
Press the … or † button to select “All”, “Added”, or “Favorite”, then press the
Default List mode
: All
Added
Favorite
ENTER button.
➢
The Channel list you want to appear when you press the CH MGR button.
• All: Shows All the channels when you press the CH.MGR button on the remote control.
• Added: Shows Added channels when you press CH.MGR button on the remote control.
• Favorite: Shows Favorite channels when you press CH.MGR button on the remote control.
Move
Enter
Return
Press the EXIT button to exit.
Press the CH MGR button on the remote control to bring up the Channel Lists.
English-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling Channels
T V
T V
T V
Channel
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Press the … or † button to select “Name”, then press the ENTER button.
Antenna
: Air
√
√
√
√
√
√
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
†
More
Move
Enter
Return
Name
2. Press the … or † button to select the channel to be assigned a new name,
then press the ENTER button.
Air 6
Air 7
Air 9
Air 11
Air 13
†
Clear
3. Press the … or † button to select a letter, a number or a blank
Clear
Clear
Clear
Clear
(Results in this sequence: A...Z, 0...9, +, -, , /, blank).
*
Press the √ button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the … or † button, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
Move
Enter
Return
To erase the assigned new name, select "Clear" by pressing the œ or √ button,
then press the ENTER button.
Name
…
Clear
Clear
Clear
Clear
Clear
Air 6
Air 7
Air 9
Air 11
Air 13
A
†
Press the EXIT button to exit.
➢
The names of digital broadcasting channels are automatically assigned and thus
cannot be assigned by users.
†
Move
Adjust
Return
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
T V
Channel
: Air
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
√
√
√
√
√
√
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Fine Tune”, then press the ENTER button.
Fine Tune
Signal Strength
†
More
Move
Enter
Return
3. Press the œ or √ button to adjust the fine tuning.
Fine Tune
Air 4
4. To store the fine tuning setting in the TV’s memory, press the ENTER button.
To reset the fine tuning setting, press the † button to select “Reset”,
then press the ENTER button.
0
Reset
Save
Press the EXIT button to exit.
Adjust
Return
➢
➢
Only analog TV channels can be fine tuned.
“ ” will appear next to the number of fine-tuned channels.
*
Fine Tune
Air 4 *
Fine Tuned
10
Reset
Save
Adjust
Return
Fine Tune
AIR 4
0
Reset
Enter
Move
Return
English-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception
quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust
your antenna to improve the reception of available digital channels.
T V
Channel
1. Press the MENU button to display the menu.
Press the … or † button to select “Channel”, then press the ENTER button.
Antenna
: Air
√
√
√
√
√
√
Auto Program
Channel Manager
Name
2. Press the … or † button to select “Signal Strength”, then press the ENTER button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Fine Tune
Signal Strength
†
Continue to adjust the antenna until you find the best position with the strongest signal.
More
Press the EXIT button to exit.
Move
Enter
Return
You can also press the ENTER button to select OK then press the EXIT button
to exit the menu.
T V
Signal Strength
OK
Enter
Return
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
T V
Channel
1. Press the MENU button to display the menu.
…
More
Press the … or † button to select “Channel”, then press the ENTER button.
LNA
: On
√
2. Press the … or † button to select “LNA”, then press the ENTER button.
Move
Enter
Return
T V
Channel
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
…
More
Press the EXIT button to exit.
LNA
:
Off
On
➢
LNA functions only when antenna is set to AIR or CABLE. (See “Selecting the Antenna”
on page 36.)
➢
➢
If the picture is noisy with the LNA set to On, select Off.
The LNA setting must be made separately for each channel.
Move
Enter
Return
English-40
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Display
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,
depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different,
the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a
display dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box
will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1024 x 768 pixels
If a vertical-frequency option exists on your display settings dialog box,
the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard
signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen
image has been optimized during manufacture.
Resolution
(Dot X Line)
Vertical
Horizontal
Vertical
Polarity
Horizontal
Polarity
Video Signal
SP-S4223
HP-S4233
HP-S5033
Frequency (Hz) Frequency (KHz)
640 X 350
720 X 400
640 X 480
70.086
70.087
59.940
70.000
72.809
75.000
56.250
60.317
70.000
72.188
75.000
60.000
74.769
60.004
70.069
72.000
75.029
59.855
60.015
31.469
31.469
31.469
35.000
37.861
37.500
35.156
37.879
43.750
48.077
46.875
31.020
37.684
48.363
56.476
57.672
60.023
44.772
47.712
N
P
P
N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
N
N
N/P
N
N/P
N
N
N
800 X 600
N/P
P
N/P
P
IBM PC / AT
Compatible
N/P
P
N/P
P
P
P
848 X 480
P
P
N
P
1024 X 768
N
N
N
N
N/P
P
N/P
P
1280 X 720
1360 X 768
P
N
P
P
• The interlace mode is not supported.
• The TV operates abnormally if a non-standard video format is selected.
• The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
• “
✔” mark means that this mode can be supported.
➢
• The PC text quality of HP-S4233 is optimum in XGA mode (1024 x 768@60Hz).
• The PC text quality of HP-S5033 is optimum in WXGA mode (1360 x 768@60Hz).
• The PC text quality of SP-S4223 is optimum in WVGA mode (848 x 480@60Hz).
• When this TV is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a TV.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHz (horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the
SOURCE button on the remote control or SOURCE button on the side panel to enter a VIDEO mode. Also, make sure that the PC is connected.
English-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
➢
➢
This function does not work in DVI-Digital mode.
Change to the PC mode first.
T V
Setup
1. Press the MENU button to display the menu.
…
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “PC”, then press the ENTER button.
More
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
√
√
√
√
√
Function Help
: On
Move
Enter
Return
2. Press the … or † button to select “Auto Adjustment”, then press the ENTER button.
The message “Auto Adjustment in progress. Please wait.” appears on the screen
and the picture adjustments are automatically activated.
T V
PC
Image Lock
Position
Auto Adjustment
Image Reset
√
√
Press the EXIT button to exit.
Move
Enter
Return
Auto Adjustment in progress. Please wait.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of the screen.
➢
Change to the PC mode first.
T V
PC
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “PC”, then press the ENTER button.
Image Lock
Position
Auto Adjustment
Image Reset
√
√
2. Press the ENTER button to select “Image Lock”.
Move
Enter
Return
3. Press the … or † button to select “Coarse” or “Fine”, then press the ENTER button.
Press the œ or √ button to adjust the screen quality, then press the ENTER button.
Press the ENTER button.
T V
Image Lock
Coarse
Fine
50
0
Press the EXIT button to exit.
➢
This feature may change the width of the image. If necessary, adjust the position to center.
Move
Enter
Return
50
Coarse
Continued...
English-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Screen Position
After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned.
➢
Change to the PC mode first.
T V
PC
1. Press the MENU button to display the menu.
Image Lock
Position
Auto Adjustment
Image Reset
√
√
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “PC”, then press the ENTER button.
2. Press the … or † button to select “Position”, then press the ENTER button.
Move
Enter
Return
3. Press the … or † button to adjust the V-Position.
Press the œ or √ button to adjust the H-Position.
Press the ENTER button.
T V
Position
Press the EXIT button to exit.
Adjust
Enter
Return
Initializing the Screen Position or Color Settings
➢
Change to the PC mode first.
T V
PC
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “PC”, then press the ENTER button.
Image Lock
Position
Auto Adjustment
Image Reset
√
√
2. Press the … or † button to select “Image Reset”, then press the ENTER button.
The message “Image Reset is completed.” appears on the screen.
Press the EXIT button to exit.
Move
Enter
Return
➢
The previously adjusted settings will be reset to the factory defaults.
Image Reset is completed.
English-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Setting
Setting the Time
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
T V
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “Time”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Return
2. Press the ENTER button to select “Clock”.
Time
--
/
--
/
----
/
-- :-- --
Clock
√
√
√
√
Sleep Timer
On Timer
Off Timer
: Off
: Inactivated
: Inactivated
Move
Enter
Return
Clock
3. Press the ENTER button to select “Clock Mode”.
Press the … or † button to select “Manual”, then press the ENTER button.
Clock Mode
:
Manual
Clock Set
Time Zone
DST
Auto
: Off
Move
Enter
Clock
Return
4. Press the … or † button to select “Clock Set”, then press the ENTER button.
Clock Mode
Clock Set
Time Zone
DST
: Manual
√
√
√
√
: Off
Move
Enter
Return
5. Press the œ or √ button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,
or “am/pm”. Set the date and time you want by pressing the … or † button,
then press the ENTER button.
Clock Set
Set current date and time.
Month
Day
--
Year
----
…
--
Press the EXIT button to exit.
†
Hour
--
Minute am/pm
➢
➢
The current time will appear every time you press the INFO button.
You can set the month, day, year, hour, and minute directly by pressing the
number buttons on the remote control.
--
--
Move
Adjust
Return
Continued...
English-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1. Press the MENU button to display the menu.
T V
Setup
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “Time”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Return
2. Press the ENTER button to select “Clock”.
T V
Time
--
/
--
/
----
/
-- :-- --
Clock
√
√
√
√
Sleep Timer
On Timer
Off Timer
: Off
: Inactivated
: Inactivated
Move
Enter
Return
3. Press the ENTER button to select “Clock Mode”.
T V
T V
T V
Clock
Press the … or † button to select “Auto”, then press the ENTER button.
Clock Mode
:
Manual
Clock Set
Time Zone
DST
Auto
: Off
Move
Enter
Time Zone
Return
Return
Return
4. Press the … or † button to select “Time Zone”, then press the ENTER button.
Select the time zone in which you live.
5. Press the … or † button to highlight the time zone for your local area
(and to move the highlight to the appropriate time zone on the map of the
United States), then press the ENTER button.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Move
Enter
Clock
6. Press the … or † button to select “DST” (Daylight Saving Time), then press the
ENTER button.
Clock Mode
: Auto
Clock Set
Time Zone
DST
Press the … or † button to select “On” or “Off”, then press the ENTER button.
Press the EXIT button to exit.
: On
Off
➢
Depending on the broadcast station and signal, the auto time may not be set correctly.
If this occurs, set the time manually.
➢
Air or cable must be connected in order to set the time automatically.
Move
Enter
Continued...
English-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the On/Off Timer
Use this feature to set the TV to turn on or off at a desired time.
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “Time”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Return
Time
2. Press the … or † button to select “On Timer”, then press the ENTER button.
1/
1/
2006/
12 00 am
:
Clock
√
√
√
√
Sleep Timer
On Timer
Off Timer
: Off
: Inactivated
: Inactivated
Move
Enter
Return
3. Press the … or † button to set the hour, then press the
√
button to move to the next step.
On Timer
Set on timer.
Minute am/pm
am
Volume Activation
Set other items using the same method as above.
Hour
Antenna
➢
➢
When finished, press the MENU button to return.
…
12
00
Air
†
You can set the hour, minute, and channel directly by pressing the number buttons on the
remote control.
Channel
3
10
No
4. Press the … or † button to select “Off Timer”, then press the ENTER button.
Move
Adjust
Return
5. Press the … or † button to set the hour, then press the √ button to move to the
Off Timer
next step. Set other items using the same method as above.
Set off timer.
Press the EXIT button to exit.
Hour Minute am/pm Activation
➢
Auto Power Off
…
am
No
12
00
When you set the timer “On”, the television will eventually turn off, if no controls are operated
for 3 hours after the TV was turned on by the timer.
†
This function is only available in timer “On” mode and prevents overheating or leakage,
which may occur if a TV is on for too long (when you are on vacation, for example).
Move
Adjust
Return
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
T V
T V
T V
Time
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “Time”, then press the ENTER button.
1
/
1
/
2006
/
12 00 am
:
Clock
√
√
√
√
Sleep Timer
On Timer
Off Timer
: Off
: Inactivated
: Inactivated
Move
Enter
Return
Return
Return
2. Press the … or † button to select “Sleep Timer”, then press the ENTER button.
Sleep Timer
Set sleep timer.
Minute
Activation
…
---
Off
†
Move
Adjust
3. Press the … or † button to select the minute.
Sleep Timer
Setting the Timer sets the Activation to “On” automatically.
Set sleep timer.
To cancel the set sleep timer:
Minute
Activation
On
Press the √ button to select “Activation”.
…
Press the … or † button to select “Off”, then press the ENTER button.
30
†
Press the EXIT button to exit.
Move
Adjust
Press the SLEEP button on the remote control until the appropriate time interval appears
(any of the preset values from “30 min” to “180 min”).
English-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Description
Selecting a Menu Language
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Press the … or † button to select “Language”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Setup
Return
2. Press the … or † button to select the appropriate language: “English”, “Spanish”
T V
or “French”, then press the ENTER button.
Plug & Play
Language
Time
: English
Spanish
Press the EXIT button to exit.
Game Mode
V-Chip
: French
Caption
†
More
Move
Enter
Return
Using the Game Mode
TM
TM
When connecting to a game console such as PlayStation or Xbox , you can enjoy a more realistic gaming experience by selecting game
menu.
T V
Setup
1. Press the MENU button to display the menu.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
Press the … or † button to select “Setup”, then press the ENTER button.
: English
: Off
2. Press the … or † button to select “Game Mode”, then press the ENTER button.
Caption
†
More
Move
Enter
Setup
Return
3. Select “Off” or “On” by pressing the … or † button, then press the ENTER button.
T V
Plug & Play
Language
Time
Game Mode
V-Chip
4. Press the EXIT button to exit.
: English
➢
Restrictions on Game mode (Caution)
• To disconnect the game console and connect another
external device, set Game to Off in the setup menu.
• If you display the TV menu in Game mode, the screen
shakes slightly.
:
Off
On
AV1
Caption
†
More
Game Mode
Move
Enter
Return
• The mark (
) appears on the screen which means
that Game Mode is on with the selected source.
➢
If Game Mode is On
• Picture Mode is automatically changed to Custom and users cannot change the mode.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset in the Sound menu is activated. Reset function initializes the Equalizer
settings to the factory default setting.
➢
➢
Game Mode is not available in TV mode.
If the picture is poor when external device is connected to TV, check if Game Mode is On.
Set Game Mode to Off and connect external devices.
English-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Closed Captions (On-Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1. Press the MENU button to display the menu.
T V
Setup
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “Caption”, then press the ENTER button.
3. Press the ENTER button to select “Caption”.
Press the … or † button to select “On”, then press the ENTER button.
Caption
†
More
Move
Enter
Caption
Return
T V
4. Press the … or † button to select “Caption Mode”, then press the ENTER button.
Press the … or † button to select submenu (Default, Service1~Service6,
CC1~CC4 or Text1~Text4) you want, then press the ENTER button.
Caption
Caption Mode
Caption Options
:
On
Off
:
Move
Enter
Return
T V
T V
T V
T V
Caption
: On
Caption
Caption Mode
Caption Options
√
√
√
: Default
Move
Enter
Return
5. Press the … or † button to select “Caption Options”, then press the ENTER button.
Caption
:
Caption
Caption Mode
Caption Options
Default
➢
➢
“Caption Options” are available only when “Service1~Service6” can be selected in “Caption Mode”.
Service1~6 in digital caption mode may not be available depending on the broadcast.
:
Service1
Service2
Service3
Service4
Service5
Service6
CC1
†
6. Press the … or † button to select “Size”, then press the ENTER button.
Press the … or † button to select the desired caption option, then press the
ENTER button.
Move
Enter
Return
Caption
Press the … or † button to select the desired sub-menu options
(see options below), then press the ENTER button.
Caption
Caption Mode
Caption Options
: On
: Default
√
√
√
Press the EXIT button to exit.
➢
➢
➢
➢
The availability of captions depends on the program being broadcast.
“Default” means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color.
Foreground Opacity and Background Opacity cannot be both set to “Transparent”.
Move
Enter
Return
Caption Options
: Default
• Size: This option consists of “Default”, “Small”, “Standard”, and “Large”. The default is “Standard”.
Size
Font Style
√
√
√
√
√
√
√
: Default
: Default
: Default
: Default
: Default
• Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want.
Foreground Color
Background Color
Foreground Opacity
Background Opacity
Return to Default
The default is “Style 0”.
• Foreground Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”,
“Yellow”, “Magenta”, and “Cyan”. You can change the color of the letter.
The default is “White”.
Move
Enter
Return
• Background Color: This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”,
“Yellow”, “Magenta”, and “Cyan”. You can change the background color
of the caption. The default is “Black”.
• Foreground Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid”,
and “Flashing”. You can change the opacity of the letter.
• Background Opacity: This option consists of “Default”, “Transparent”, “Translucent”, “Solid”,
and “Flashing”. You can change the background opacity of the caption.
• Return to Default: This option sets each of “Size”, “Font Style”, “Foreground Color”, “Background
color”, “Foreground Opacity”, and “Background Opacity” to its default.
Press the CAPTION button on the remote control to select “On” or “Off”.
English-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting
signal, the Analog Caption function may operate on digital channels.)
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “Caption”, then press the ENTER button.
Caption
†
More
Move
Enter
Return
Caption
: Off
Caption
Caption Mode
Caption Options
√
√
√
: Default
Enter
Return
Caption
: On
3. Press the ENTER button to select “Caption”.
Caption
Caption Mode
Caption Options
√
√
√
Press the … or † button to select “On”, then press the ENTER button.
: Default
Move
Enter
Caption
Return
4. Press the … or † button to select “Caption Mode”, then press the ENTER button.
Press the … or † button to select submenu (CC1~CC4 or Text1~Text4) you want,
then press the ENTER button.
Default
:
:
Caption
Caption Mode
Caption Options
CC1
CC2
CC3
CC4
Text 1
Text 2
Text 3
Text 4
Press the EXIT button to exit.
• The default is “CC1”.
• CC1: The Primary Synchronous Caption Service. These are captions in the primary language
Move
Enter
Return
that must be in sync with the sound, preferably matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are not sufficient.
➢
• The Caption feature doesn’t work in COMPONENT, PC, HDMI(DVI) modes.
• The availability of captions depends on the program being broadcast.
You can also press the CAPTION button on the remote control to select Captions
“On” or “Off
English-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Transparency Level
Adjusts the transparency of the menu screen.
T V
Setup
1. Press the MENU button to display the menu.
…
Press the … or † button to select “Setup”, then press the ENTER button.
More
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
√
√
√
√
√
2. Press the … or † button to select “Menu Transparency”, then press the ENTER
button.
Function Help
: On
Move
Enter
Setup
Return
3. Press the … or † button to select level, then press the ENTER button.
T V
…
More
Press the EXIT button to exit.
High
:
Menu Transparency
Energy Saving
Screen Burn Protection
PC
Medium
:
Low
Opaque
Function Help
: On
Move
Enter
Return
Using the Energy Saving Feature
This feature adjusts the screen brightness automatically depending on the surrounding lighting conditions.
T V
Setup
1. Press the MENU button to display the menu.
…
More
Press the … or † button to select “Setup”, then press the ENTER button.
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
√
√
√
√
√
2. Press the … or † button to select “Energy Saving”, then press the ENTER button.
Press the … or † button to select submenu (Off, Low, Medium, High)
you want, then press the ENTER button.
Function Help
: On
Press the EXIT button to exit.
Move
Enter
Setup
Return
ꢀ Off: Inactivates the Energy Saving feature.
ꢀ Low: Adjusts the brightness of the TV screen to the maximum level
regardless of the surrounding illumination.
T V
…
More
The energy saving efficiency is low.
ꢀ Medium: Adjusts the brightness of the TV screen to the mid level
regardless of the surrounding illumination.
The energy saving efficiency is the average.
ꢀ High: Adjusts the brightness of the TV screen to darker regardless of the
surrounding illumination.
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
Low
Medium
: High
Function Help
The energy is saved most effectively.
Move
Enter
Return
Press the E.SAVING button to select the energy saving setting.
English-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set
picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between
movement of the picture in minutes.
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
…
More
Press the … or † button to select “Setup”, then press the ENTER button.
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
√
√
√
√
√
2. Press the … or † button to select “Screen Burn Protection”, then press the
ENTER button.
Function Help
: On
3. Press the ENTER button to select “Pixel Shift”, then press the ENTER button.
Pressing the … or † button will alternate between “On” and “Off”.
You will also see the items “Horizontal Dot”, “Vertical Line” and “Time”.
Move
Enter
Return
Screen Burn Protection
ꢀ Pixel Shift: Using this function, you can minutely move pixels on the PDP in
horizontal or vertical direction to prevent after-images on the screen.
Pixel Shift
All White
Signal Pattern
√
√
√
4. Press the … or † button to select the item you wish to change, then press the
ENTER button.
Press the … or † button to change the value of the item, then press the ENTER
button.
Move
Enter
Return
Return
Return
ꢀ Optimum condition for pixel shift;
Pixel Shift
Horizontal Dot
Vertical Line
Time(min)
2
2
2
Pixel Shift
Horizontal Dot
Vertical Line
Time
:
Off
:
: 2
: 2
On
Press the EXIT button to exit.
Move
Enter
Pixel Shift
: On
Pixel Shift
Horizontal Dot
Vertical Line
Time
: 0
: 1
: 2
3
4
Move
Enter
English-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts.
T V
T V
T V
Screen Burn Protection
1. Press the MENU button to display the menu.
Pixel Shift
All White
√
√
√
Press the … or † button to select “Setup”, then press the ENTER button.
2. Press the … or † button to select “Screen Burn Protection”, then press the
Signal Pattern
ENTER button.
3. Press the … or † button to select “All White” or “Signal Pattern”, then press the
ENTER button.
Move
Enter
Return
Press the EXIT button to exit.
Screen Burn Protection
ꢀ All White: This function removes after-images on the screen by changing the color
of pixels to white. Use this function when there are remaining after-images
or symbols on the screen especially when you displayed a still image on
the screen for a long time.
ꢀ Signal Pattern: This function removes after-images on the screen by moving all
the pixels on the PDP according to a pattern. Use this function
when there are remaining after-images or symbols on the screen
especially when you displayed a still image on the screen for a
long time.
Pixel Shift
All White
√
√
√
Signal Pattern
Move
Enter
Return
➢
➢
➢
To remove after-images on the screen, use either the “All White” or “Signal Pattern”
function. Although both functions remove after-images on the screen, “Signal Pattern”
is more effective.
The after-image removal function has to be executed for a long time (approximately
1 hour) to effectively remove after-images on the screen. If the after-image is not
removed after performing the function, repeat the function again.
Press any key on the remote control to cancel this feature.
Screen Burn Protection
Pixel Shift
All White
√
√
√
Signal Pattern
Move
Enter
Return
Setting the Function Help
Displays help on the menu functions.
1. Press the MENU button to display the menu.
T V
Setup
…
Press the … or † button to select “Setup”, then press the ENTER button.
More
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
√
√
√
√
√
2. Press the … or † button to select “Function Help”, then press the ENTER
button.
Function Help
: On
Move
Enter
Setup
Return
3. Press the … or † button to select “Off” or “On”, then press the ENTER button.
T V
…
Press the EXIT button to exit
More
Menu Transparency
Energy Saving
Screen Burn Protection
PC
: Medium
: Off
➢
The Function Help default setting is On.
Function Help
:
Off
On
Move
Enter
Return
Switches the Function Help on.
English-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID
number) before any of the V-Chip restrictions are set up or changed.
➢
➢
➢
When the V-Chip feature is activated, the PIP features do not function.
The V-Chip does not work if the input is DTV (HD or SD).
V-Chip function is not available in HDMI or component mode.
Setting Up Your Personal ID Number (PIN)
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
➢
The default PIN number of a new TV set is “0-0-0-0”.
Caption
†
More
Move
Enter
Return
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
V-Chip
: Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
3. The “V-Chip” screen will appear.
Press the … or † button to select “Change PIN”, then press the ENTER button.
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them.
As soon as the 4 digits are entered, the “Confirm New PIN” screen appears.
Re-enter the same 4 digits. When the Confirm screen disappears,
your PIN has been memorized.
V-Chip Lock
√
√
√
√
√
√
√
Press the EXIT button to exit.
Move
Enter
Change PIN
Return
➢
If you forget the PIN, press the remote-control buttons in the following sequence,
which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2 → 4 → Power On.
Enter New PIN
Confirm New PIN
0~9 Enter PIN
Return
Continued...
English-53
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Enable/Disable the V-Chip
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Caption
†
More
Move
Enter
Return
Return
Return
T V
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
V-Chip
T V
3. The “V-Chip” screen will appear.
To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock”
field is “On”. (Pressing the … or † button will alternate between “On” and “Off”.)
Press the ENTER button.
V-Chip Lock
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
: Off
On
Press the EXIT button to exit.
Move
Enter
How to Set up Restrictions Using “TV Parental Guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
Caption
†
More
Move
Enter
Return
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
V-Chip
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
V-Chip
: On
TV Parental Guidelines
MPAA Rating
3. The “V-Chip” screen will appear. Press the … or † button to select “TV Parental
Guidelines”, then press the ENTER button.
V-Chip Lock
√
√
√
√
√
√
√
4. The “TV Parental Guidelines” screen will appear.
Press the … or † button to select one of the six aged based categories:
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
• TV-Y: Young children
• TV-Y7: Children 7 and over
• TV-G: General audience
• TV-PG: Parental guidance
• TV-14: Viewers 14 and over
• TV-MA: Mature audience
Move
Enter
Return
Continued...
English-54
Download from Www.Somanuals.com. All Manuals Search And Download.
T V
TV Parental Guidelines
5. At this point, one of the TV-Ratings is selected.
Press the ENTER button. Depending on your existing setup, the “ ” symbol will
Allow All
Block All
be selected. (Blank = Unblocked,
While “ ” is selected, press the ENTER button to block or unblock the category.
To select a different TV-Rating, press the … or † button and then repeat the process.
= Blocked)
➢
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
➢
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to
change any of the following sub-ratings:
Move
Enter
Return
FV: Fantasy violence / D: Sexually suggestive dialog / L: Adult language /
S: Sexual situation / V: Violence
➢
The V-Chip will automatically block certain categories that are “more restrictive”. For example,
if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the
TV-G category, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG,
TV-14, and TV-MA). The subratings (D, L, S, V) work together similarly. (See next section.)
6. How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA
(See Step 4, on page 54), and press the ENTER button.
The “
” symbol will be displayed for each sub-rating.
While “
” is selected, press the √ button to go to a sub rating.
Press the ENTER to block the sub rating. To select a different TV-Rating,
press the … or † button and then repeat the process.
➢
The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and
TV-MA will automatically be blocked.
7. Press the EXIT button to clear all the screens. (Or proceed to the next section,
and set up additional restrictions based on the MPAA codes.)
➢
These categories consist of two separate groups: TV-Y and TV-Y7
(young children through age 7), and TV-G through TV-MA (everybody else).
The restrictions for these two groups work independently: If a household includes very
young children as well as young adults, the TV guidelines must be set up separately for
each age group. (See next step.)
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA
or TV-Ratings).
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Caption
†
More
Move
Enter
Return
T V
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
Continued...
English-55
Download from Www.Somanuals.com. All Manuals Search And Download.
T V
V-Chip
: On
TV Parental Guidelines
MPAA Rating
3. The “V-Chip” screen will appear. Press the … or † button to select “MPAA Rating”,
then press the ENTER button.
V-Chip Lock
√
√
√
√
√
√
√
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Enter
Return
4. Press the … or † button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected.
The “ ” symbol is indicated. While “ ” is selected, press the ENTER button
to block or unblock the category.
T V
MPAA Rating
Allow All
Block All
Press the EXIT button to exit.
➢
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
Move
Enter
Return
• G:
General audience (no restrictions).
• PG:
Parental guidance suggested.
• PG-13: Parents strongly cautioned.
• R:
Restricted. Children under 17 should be accompanied by an adult.
• NC-17: No children under age 17.
• X:
• NR:
Adults only.
Not rated.
➢
The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X” will automatically
be blocked also.
How to Set up Restrictions Using ‘Canadian English’
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Caption
†
More
Move
Enter
Return
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
V-Chip
: On
TV Parental Guidelines
MPAA Rating
3. The “V-Chip” screen will appear. Press the … or † button to select
“Canadian English”, then press the ENTER button.
V-Chip Lock
√
√
√
√
√
√
√
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Enter
Return
Continued...
English-56
Download from Www.Somanuals.com. All Manuals Search And Download.
T V
Canadian English
4. Press the … or † button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “ ” symbol is
indicated.
Allow All
Block All
Press the EXIT button to exit.
➢
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
Move
Enter
Return
• E:
Exempt programming includes...news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
• C:
Programming intended for children under age 8.
• C8+: Programming generally considered acceptable for children 8 years and over to watch
on their own.
• G:
General programming, suitable for all audiences.
• PG: Parental Guidance.
• 14+: Programming contains themes or content which may not be suitable for viewers under
the age of 14.
• 18+: Adult programming.
➢
The V-Chip will automatically block any category that is “more restrictive”. For example, if you
block “G” category, then “PG”, “14+” and “18+” will automatically be blocked also.
How to Set up Restrictions Using ‘Canadian French’
T V
T V
T V
T V
Setup
1. Press the MENU button to display the menu.
Press the … or † button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Caption
†
More
Move
Enter
Return
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
V-Chip
: On
TV Parental Guidelines
MPAA Rating
3. The “V-Chip” screen will appear. Press the … or † button to select
“Canadian French”, then press the ENTER button.
V-Chip Lock
√
√
√
√
√
√
√
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Enter
Return
Canadian French
4. Press the … or † button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
” symbol is
Allow All
Block All
Press the EXIT button to exit.
➢
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• E:
Exempt programming includes...news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
Move
Enter
Return
• G:
General.
• 8 ans+: Not recommended for young children.
• 13 ans+: Programming may not be suitable for children under the age of 13.
• 16 ans+: Programming is not suitable for children under the age of 16.
• 18 ans+: Programming restricted to adults.
➢
The V-Chip will automatically block any category that is “more restrictive”. For example,
if you block “8 ans+” category, then “13 ans+”, “16 ans+” and “18 ans+” will automatically
be blocked also.
English-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the V-Chip for Digital channel
Parental restriction information can be used while watching DTV channels.
T V
Setup
1. Press the MENU button to display the menu.
Press the
…
or
†
button to select “Setup”, then press the ENTER button.
Plug & Play
Language
Time
Game Mode
V-Chip
√
√
√
√
√
√
: English
: Off
2. Press the
…
or
†
button to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Caption
†
More
Move
Enter
Return
T V
V-Chip
Enter PIN
*
*
*
*
0~9 Enter PIN
Return
T V
V-Chip
: On
TV Parental Guidelines
MPAA Rating
3. The “V-Chip” screen will appear. Press the
…
or
†
button to select
“Downloadable U.S. Rating”, then press the ENTER button.
V-Chip Lock
√
√
√
√
√
√
√
➢
➢
➢
If information is not downloaded from the broadcasting station, the Downloadable
US -rating menu is deactivated.
Canadian English
Canadian French
Parental restriction information is automatically downloaded while watching DTV
channels. It may take several seconds.
Downloadable U.S. Rating
Change PIN
The downloadable US rating menu is available for use after information is downloaded
from the broadcasting station. However, depending on the information from the
broadcasting station, it may not be available for use.
Move
Enter
Return
The number of
current rating
information
Rating title
T V
Downloadable U.S. Rating
4. Press the
…
or
†
button to select a appropriate restriction.
Press the ENTER button to activate the restriction selected.
Humor Level 1/2
√
The “ ” symbol is indicated.
Allow All
Block All
DH
MH
H
Press the EXIT button to exit.
VH
EH
➢
➢
➢
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
Parental restriction levels differ depending on the broadcasting station.
Move
Enter
Return
The default menu name and Downloadable US rating changes depending on the
downloaded information.
The number of
all the rating
information
➢
Even if you set the On-screen display to your desired language, the "Downloadable
U.S. Rating" menu will appear in English only.
➢
➢
The rating will automatically block certain categories that are more restrictive.
The rating titles(For example: Humor Level..etc) and TV ratings(For example:
DH,MH,H..etc) may differ depending on the broadcasting station.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
1. Enter your PIN.
Channel Is Locked by
TV-PG[ S ]
To resume normal viewing, tune to a different channel using CH
or CH
button.
Under certain conditions (depending on the rating of the local TV programs) the V-Chip
might lock out all the channels. In this case, use the V-Chip function for an “emergency
escape”:
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG[ L ]
1. Press the MENU button. Press the … or † button to select “Setup”, then press
the ENTER button.
2. Press the … or † button to select “V-Chip”, then press the ENTER button.
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
3. Enter your PIN, then press the ENTER button, and press the … or † button to
temporarily disable the V-Chip Lock.
Press MENU for main menu.
➢
If you forget the PIN, press the remote-control buttons in the following sequence,
which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2 → 4 → Power On.
English-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Identifying Problems
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Poor sound quality.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No sound or sound is too low at
maximum volume.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable
broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check all wire connections.
Picture rolls vertically.
The TV operates erratically.
The TV won’t turn on.
Unplug the TV for 30 seconds, then try operating it again.
Make sure the wall outlet is working.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Press the TV button to put your remote in the “TV” mode.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries are inserted correctly.
Digital broadcasting screen
problem.
Please check the digital signal strength and input antenna.
The image is too light or too dark. Adjust the Brightness and Contrast.
Adjust the Fine tuning.
The image is too large or too small. Adjust the Size settings.
Screen is black and power indicator On your computer check; Power, Signal Cable.
light blinks steadily.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
The visual qualities of digital
channels vary.
The visual qualities of digital channels may vary depending on the original production method (analog
or digital).
• If the original production method is digital: High visual quality program.
• If the original production method is analog: The digital program displayed on the screen is originally
an analog program which has been converted to digital. The visual quality is of an SD grade.
Although the TV caption shows
HD, the visual quality is not
satisfactory.
The HD caption that appears when switching channels or when pressing the Information button on the
remote control means the selected channel is a digital channel. If the broadcasting station converts an
analog signal into digital and transmits the signal, the visual quality may not be perfect.
English-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Installation Instructions
Refer to the installation guide supplied with your wall bracket.
Installation Notes
1. Contact a professional installation service to install the wall bracket.
2. Samsung Electronics is not responsible for any damages to the product or harm to customers or others when the installation is done by the
customer.
3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
4. Connect all external devices prior to installing the wall bracket.
5. The package contents and parts supplied for the wall mount are subject to change without prior notice.
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Please use only the parts and components provided for wall mount installation.
Plastic Hanger : 4
Accessories
Screw : 4
1
Left : 1
Right : 1
Wall Mount Bracket
ASSY-HINGE
How to assemble the Wall Mount Bracket
1. The wall mount bracket is delivered separately. Please tighten the captive screw in the
direction of the arrow after assembling the bracket.
Install the Wall Mount Bracket after the screws are securely inserted into the wall.
Captive Screws
Wall Mount Bracket
ASSY-HINGE
(LEFT)
Separate ASSY-HINGE
into Left and Right.
ASSY-HINGE
(RIGHT)
Fixing the TV panel to the wall attachment panel bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)
1. Remove the screws from the back of the PDP.
2. Use the screw and assemble the plastic hanger. (Please refer to the
following picture.)
• Please ask the installers to install the wall mount bracket.
• Please be sure to check if the plastic hanger is completely secured
on both the left and right side after hanging the SET on the wall
mount bracket.
• Please avoid catching your fingers while installing and adjusting the
angle.
• Please tightly secure the wall mount bracket to the wall to avoid
injury from a falling TV.
Continued...
English-60
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Tighten the screws of the plastic hanger (shown in picture 2) to the
4. Remove the Safety Pins. Fasten the 4 plastic latches assembled at
back side of the PDP.
step (#) on the back side of the PDP using the guide holes of the
wall mount, push (!) and hook (@) down to secure the PDP on the
wall mount as illustrated. Secure the PDP by inserting the Safety
Pins, not to fall from the wall mount.
PDP
Wall Bracket Wall
How to Adjust Mounting Angle
Note: Please secure the mounting bracket on the wall surface after setting its angle at 0°
1. Secure the SET to the wall mount bracket.
Hold onto the middle of the PDP to
(Please refer to the following instructions.)
adjust the angle (not the sides of the
PDP).
2. Set the angle by pulling the upper end of the SET attached to
bracket in the direction of the arrow.
(Refer to the illustration on the right.)
3. The angle can be adjusted from 0° to 15° by 2°.
Connecting External Devices to the PDP
Note: To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:
1. Be sure to remove the safety pins underneath the PDP.
Note: If the safety pins are not removed, the angle cannot be adjusted.
Any attempt to do so may cause damage to the PDP.
2. Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated)
to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide holes on both
sides as illustrated in figure @.
Note: Viewing the PDP after connecting the external devices Remove the Safety Pins
to adjust the angle to 0°, and then secure the Safety Pins again.
• For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used,
the PDP may fall, causing serious injury.
English-61
Download from Www.Somanuals.com. All Manuals Search And Download.
How to assemble the Stand-Base
1. Pull the folded stand in the direction of the arrow.
Stand
➢
Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen.
Always store the TV upright.
Specifications
Model Name
SP-S4223
42 inch
HP-S4233
42 inch
HP-S5033
50 inch
Screen Size (Diagonal)
Power Supply
AC 110-120V~ 60Hz
330 W
AC 110-120V~ 60Hz
380 W
AC 110-120V~ 60Hz
480 W
Power Consumption
PC Resolution
848 x 480 @ 60 Hz
1024 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Antenna
Input
ANT 1 - CABLE IN
ANT 2 - AIR IN
ANT 1 - CABLE IN
ANT 2 - AIR IN
ANT 1 - CABLE IN
ANT 2 - AIR IN
75Ω unbalanced
75Ω unbalanced
75Ω unbalanced
Video
Input
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
HDMI1 (DVI Compatible
HDMI2
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
AV1, AV2
S-VIDEO1, S-VIDEO2
AV1, AV2
S-VIDEO1, S-VIDEO2
Audio
Input
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
Sound
Output
AUDIO (L/R)
AUDIO (L/R)
AUDIO (L/R)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
Audio
Output
41.7 X 3.9 X 28.3 inches
(1059.5 X 99.5 X 718 mm)
41.7 X 12.9 X 29.5 inches
(1059.5 X 326.5 X 749.5 mm)
41.7 X 3.9 X 28.3 inches
(1059.5 X 99.5 X 718 mm)
41.7 X 12.9 X 29.5 inches
(1059.5 X 326.5 X 749.5 mm)
48.5 X 3.9 X 31.8 inches
(1232.8 X 99.5 X 807 mm)
48.5 X 14.2 X 33 inches
Dimensions (WxDxH)
Body
(1232.8 X 362.5 X 838.5 mm)
With stand
Weight
Body
With stand
73.2 lbs (33.2 kg)
77.2 lbs (35 kg)
73.2 lbs (33.2 kg)
77.2 lbs (35 kg)
91.9 lbs (41.7 kg)
95.9 lbs (43.5 kg)
➢
Design and specifications are subject to change without prior notice.
English-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions (SP-S4223/HP-S4233)
TOP VIEW
FRONT VIEW
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM
SIDE VIEW
REAR VIEW
English-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions (HP-S5033)
TOP VIEW
FRONT VIEW
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM
SIDE VIEW
REAR VIEW
English-64
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Country
Customer Care Center ꢁ
Web Site
Address
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
CANADA
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronics America, Inc.
105 Challenger Road
U.S.A
Ridgefield Park, NJ 07660-0511
BN68-00991J-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|