OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV
and retain it for future reference.
32LB550B
42LB5500
49LB5500
55LB5500
32LB560B
32LB5600
39LB5600
42LB5600
*MFL67987202*
P/NO : MFL67987202 (1402-REV01)
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
3
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• CAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
• Only use attachments/accessories specified
by the manufacturer.
• Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• Warning - To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
• Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
• Keep the packing anti-moisture material
or vinyl packing out of the reach of
children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake,
induce vomiting and go to the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
• Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
4
• Grounding
• Cleaning
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
• Moving
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Power
Supply
• Ventilation
Short-circuit
Breaker
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
• If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
• Keep the product away from direct sunlight.
• Never touch this apparatus or antenna during
a lightning storm.
• When mounting a TV on the wall, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
• Do not allow an impact shock, any objects to
fall into the product, and do not drop anything
onto the screen.
• As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
• Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.
• Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
• DISCONNECTING DEVICE FROM THE MAIN
POWER
Mains plug is the disconnecting device. The
plug must remain readily operable.
• Store the accessories (battery, etc.) in a safe
location out of the reach of children.
• This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or allow
the batteries to overheat.
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamp
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
5
• Dot Defect
Preventing image burn or burn-in on your
TV screen
The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots
on the screen while you’re viewing the TV.
Those dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
• Generated Sound
• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
• If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
• Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
Cracking noise: A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required. Electrical circuit
humming/panel buzzing: A low level noise
is generated from a high-speed switching
circuit, which supplies a large amount
of current to operate a product. It varies
depending upon the product. This generated
sound does not affect the performance and
reliability of the product.
• Take care not to touch the ventilation
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
• Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
• If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This
is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
6
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device. Any
changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
For USA
LG Recycling Policy
LG Electronics offers a customized e-waste take-back and recycling service that meets local
needs and requirements in the countries where e-waste regulations are in place, and also provides
product and packaging take-back and recycling service voluntarily in some countries. LG Electronics
evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the
goal of improving recyclability where practicable. Through these activities, LG seeks to contribute
to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
7
LICENSES
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com. In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[email protected]. This offer is valid for three (3) years from the date on which you purchased the
product.
NOTE
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are
using.
• New features may be added to this TV in the future.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
8
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
Remote Control, Batteries
(AAA)
Owner’s Manual
Power Cord
(For 32LB550B, 32LB560B,
32LB5600)
(For 42/49/55LB5500,
39/42LB5600)
Stand Base
Stand Screws
4 EA, M4 x L20
Stand Screws
4 EA, M4 x L14
(For 42LB5500, 42LB5600)
Cable Holder
Stand Holder
2 EA
Wall Mount Inner Spacers
2 EA
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
CAUTION
• Do not use any unapproved items to ensure the safety and product’s lifespan.
• Any damages or injuries by using unapproved items are not covered by the warranty.
• Some models appear to have a thin film on the screen. It is actually part of the screen; do not
remove it.
NOTE
• The items supplied with your product may vary depending upon the
model.
B
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV’s USB port.
B
A
A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
10
Parts and buttons
Screen
NOTE
• Joystick button is located
below the screen of TV.
Joystick Button
Power Indicator
Remote Control Sensor
Speakers
Using the joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic functions
When the TV is turned off, place your finger on the joystick button, press it once
and release it.
Power On
When the TV is turned on, place your finger on the joystick button, press it once
for a few seconds and release it. (However, if the menu button is on the screen,
pressing and holding the joystick button will let you exit the menu.)
Power Off
If you place your finger over the joystick button, move it left or right, you can
adjust the volume level you want.
Volume Control
Channels Control
If you place your finger over the joystick button, move it up or down, you can
scroll through the saved channels you want.
NOTE
• With your finger over the joystick button, move it up, down, left, or right, be careful not to press the
joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll
through saved channels.
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the menu items ( ,
,
,
) moving the joystick button up, down, left, or right.
TV Off
Settings
Close
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Input List
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
11
Lifting and moving the TV
Setting up the TV
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
Attaching the stand
transportation regardless of its type and size.
CAUTION
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
CAUTION
• Avoid touching the screen at all times, as
this may result in damage to the screen.
• Do not place the product on the floor with its
front facing down without padding. Failure to
do so may result in damage to the screen.
1
1
• It is recommended to move the TV in the
box or packing material that the TV originally
came in.
2
• Before moving or lifting the TV, disconnect
the power cord and all cables.
A. Stand Base
• When holding the TV, the
screen should face away from
you to avoid damage.
• Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
B. Stand Base
2
(For 32LB550B,
32LB560B,
32LB5600)
4 EA
M4 x L20
(For
• Use at least two people to
move a large TV.
• When transporting the TV by
hand, hold the TV as shown in
the following illustration.
42/49/55LB5500,
39/42LB5600)
4 EA
M4 x L14
• When transporting the TV, do not expose the
TV to jolts or excessive vibration.
• When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
12
Mounting on a table
Securing the TV to a wall (optional)
1
Lift and tilt the TV into its upright position on
a table.
(Depending upon model)
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
(
4 inche
s)
10 cm
10 cm
10 cm
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Connect the power cord to a wall outlet.
2 Mount the wall brackets with the bolts to
the wall. Match the location of the wall
bracket and the eye-bolts on the rear of the
TV.
CAUTION
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable. Make
sure to keep the rope parallel to the flat
surface.
CAUTION
• Make sure that children do not climb on or
hang on the TV.
NOTE
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• Brackets, bolts, and ropes are optional. You
can obtain additional accessories from your
local dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
13
Mounting on a wall
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount.
32LB550B
32LB560B
32LB5600
39LB5600
42LB5500
49LB5500
55LB5500
42LB5600
Model
VESA (A x B)
A
B
200 x 200
400 x 400
Standard screw
M6
4
M6
4
Number of screws
Wall mount bracket LSW240B
(optional) MSW240
LSW440B
MSW240
10 cm
(
4 inche
s)
10 cm
10 cm
10 cm
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
14
CAUTION
• Disconnect the power before moving or
installing the TV. Otherwise electric shock
may occur.
• If you install the TV on a ceiling or slanted
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel. When using a third-party wall
mount, it is not covered by the warranty.
• Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
NOTE
• Use the screws that are listed in the VESA
standard screw specifications.
• The wall mount kit includes an installation
manual and necessary parts.
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
• The length of screws may differ depending
upon the wall mount. Make sure to use the
proper length.
• For more information, refer to the manual
supplied with the wall mount.
• Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
• (For 42LB5500, 42LB5600)
When attaching a wall mounting bracket to
the TV, insert the wall mount inner spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
Wall Mount Inner Spacers
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
15
MAKING CONNECTIONS
• This section uses illustrations of the LB5600 series.
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
For more information on external device’s connection, refer to the manual provided with each device.
NOTE
• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual provided with the connected device.
• The external device connections shown may differ slightly from illustrations in this manual.
• Connect external devices to the TV regardless about the order of the TV port.
• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
• Refer to the external equipment’s manual for operating instructions.
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items
and an RF cable is optional.
VHF Antenna
UHF Antenna
Antenna
Coaxial (75Ω)
(*Not provided)
Terminal
CAUTION
• Make sure not to bend the copper wire of
the RF cable.
Copper wire
NOTE
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby
Digital
• Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
16
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device
and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.
Digital Audio
System
Blu-Ray / HD Cable Box /
HD STB / DVD / PC
OPTICAL AUDIO IN
HDMI
USB
1
ANTENNA /
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO/Y
PB
P
R
L/MONO AUDIO
R
COMPONENT IN AV IN
(For 42/49/55
LB5500,
32/39/42
LB5600)
Mobile phone
HDMI
Y
PB
PR
L
R
Blu-Ray /
HD Cable Box /
HD STB / DVD
VIDEO
AUDIO
VIDEO L/MONO AUDIO
R
Blu-Ray / HD Cable Box /
HD STB / DVD
Blu-Ray / HD Cable Box /
HD STB / DVD / VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
17
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label
inside the compartment, and close the battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient
pollution. To remove the batteries, perform the installation actions in reverse.
CAUTION
• Do not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
(POWER) Turns the TV on or off.
TV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing
repeatedly).
FLASHBK
VOL
Adjusts the volume level.
FAV Accesses your favorite channel list.
AUDIO Digital signal: Changes the audio language.
Analog signal: Changes the MTS sound.
AUDIO
MUTE
CH
PAGE
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
PICTURE Changes the image mode.
INFO Shows information on the current program.
SOUND Changes the sound mode.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
Not functional.
SLEEP Sets the length of time until the TV to turns off.
Control buttons (
,
,
,
,
) Controls the compatible devices (USB).
These access special functions in some menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
18
To set advanced control
SETTINGS
SETTINGS ➾ PICTURE ➙ Picture Mode ➙
Advanced Control / Expert Control
To set up the channels automatically
For each picture mode, screen can be
calibrated; or for a special screen, picture
settings can be adjusted. Select the desired
Picture Mode.
SETTINGS ➾ CHANNEL ➙ Auto Tuning
Memorizes automatically the channels being
broadcast.
• Dynamic Contrast Adjusts the contrast to
the optimal level according to the image’s
brightness.
• Dynamic Color Adjusts colors to make the
image appear in more natural colors.
• Skin Color Skin color spectrum can be
separately set to implement the skin color as
defined by the user.
• The channels will not be memorized properly
if the antenna/cable is not installed correctly.
• Auto Tuning memorizes the channels that are
currently being broadcast.
• If Lock System is turned on, a pop-up
window will appear asking for password.
To select Picture Mode
• Grass Color Natural color spectrum
(meadows, hills, etc.) can be separately set.
• Sky Color Sky color is set separately.
• Gamma Sets the gradation curve according to
the output of picture signal in relation to the
input signal.
• Color Gamut Selects the range of colors that
can be expressed.
• Edge Enhancer Shows clearer and distinctive
yet natural edges of the video.
• Color Filter Filters a specific color spectrum
in RGB colors to fine-tune color saturation
and hue accurately.
• Color Temperature Adjusts the overall tone
of the screen as desired. In Expert mode,
detailed fine-tuning can be set via Gamma
method, etc.
• Color Management System This system is
used by experts to adjust color with a test
pattern. They can select from six color areas
(Red/ Green/Blue/ Cyan/Magenta/Yellow)
without affecting other colors. For normal
images, adjustments may not result in
noticeable color changes.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
SETTINGS ➾ PICTURE ➙ Picture Mode
Select the picture mode optimized for the
viewing environment or the program.
• Vivid Heightens contrast, brightness and
sharpness to display vivid images.
• Standard Displays images in standard levels
of contrast, brightness and sharpness.
• APS / Eco (Depending upon model)
The Energy Saver feature changes settings
on the TV to reduce power consumption.
• Cinema / Game Displays the optimum picture
for movie, game.
• Expert Menu for adjusting picture quality that
allows experts and amateurs to enjoy the
best TV viewing. This menu for adjustment
is provided for ISF-certified picture tuning
professionals. (ISF logo can only be used on
ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified
Calibration Control
• Depending upon input signal, available range
of picture modes may differ.
• Expert mode is for picture tuning
professionals to control and fine-tune using
a specific image. For normal images, the
effects may not be drastic.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
19
To set additional picture options
To use TV speaker
SETTINGS ➾ PICTURE ➙ Picture Mode ➙
Picture Option
SETTINGS ➾ AUDIO ➙ TV Speaker
Sound is output through the TV speaker.
Adjusts detailed setting for images.
• Noise Reduction Eliminates noise in the
picture.
• MPEG Noise Reduction Eliminates noise
generated while creating digital picture
signals.
To set the password
SETTINGS ➾ LOCK ➙ Set Password
Set or change the TV password.
• The initial password is set to 0000.
• Black Level Adjusts the brightness and
contrast of the screen to suit the black level.
• Real Cinema Optimizes the screen for movie
viewing.
• Motion Eye Care [Depending upon model]
Saves power consumption by adjusting the
brightness corresponding to the movement
of the image on the screen.
To set the caption
SETTINGS ➾ OPTION ➙ Caption
View captions when the TV station provides
captioned programming. Program captions
work only on digital/analog broadcasts or
external input.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
Change Caption to On and select caption
settings.
• Mode
CC 1-4 (Closed Captioning) / Text 1-4:
Displays the audio portion of a TV program
as text on the TV screen. CC1 is the most
common mode in use.
Field 1 data channels: two Captions (CC1,
CC2), two Text (T1, T2).
Field 2 data channels: two Captions (CC3,
CC4), two Text (T3, T4).
Service 1-6: This is only available for the
digital broadcasting system.
To use Energy Saving feature
SETTINGS ➾ PICTURE ➙ Energy Saving
Saves electric power by adjusting screen
brightness.
• Off Turns off the Energy Saving.
• Minimum / Medium / Maximum Applies the
pre-set Energy Saving.
• Screen Off Screen is turned off and only
sound is played. Press any button on the
remote control to turn the screen back on.
• Digital Option: Set up the size and color
of the captions on Digital Option. Please
select Set By Program or Custom. Select
Custom to adjust minute options such as the
captions’ size and color.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
20
To return to initial settings
Warning when using USB storage devices
• USB storage devices with a built-in auto
recognition program or its own driver may
not work.
• Some USB storage devices may not work or
may work improperly.
• Use only those USB storage devices
formatted with FAT32 or NTFS File System
provided by Windows.
SETTINGS ➾ OPTION ➙ Initial Setting
Returns to initial default mode by deleting all
optional setup. Once initialization is completed,
the TV will turn off and on by itself.
• When Lock System is in place, a pop-up
window appears and asks for password.
• Do not turn off the power during initialization.
• For external USB HDD, use devices with less
than 5V-rated voltages and 500 mA-rated
current.
• It is recommended to use USB flash drive
with 32 GB or less and USB HDD with 2 TB
or less.
• If a USB HDD with power-saving function
does not work properly, turn the power off
and on. For more information, refer to the
user manual of USB HDD.
• Data in the USB storage device can be
damaged so back up important files in other
devices. Data maintenance is the user’s
responsibility. The manufacturer is not
responsible for data loss.
To remove the USB device
Q.MENU ➾ Eject USB
Once the message that the USB device was
removed is displayed, remove the device from
the TV.
• After selecting to remove USB device, the
USB storage device cannot be read. Remove
the USB storage device and then reconnect
it.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS / TO SEE THE WEB MANUAL
21
Supported Photo Formats
• Category: jpeg, jpg
[Available file type]
SOF0: Baseline,
TO SEE THE WEB
MANUAL
SOF1: Extend Sequential,
SOF2: Progressive
[Photo size] Minimum: 64 x 64,
Maximum: Normal Type: 15,360 (W) x 8,640
(H), Progressive Type: 1,024 (W) x 768 (H)
Web manual allows you to easily access
detailed TV information.
Supported Audio Formats
• File type: mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 32 kHz - 48 kHz
[Support] MPEG-1, MPEG-2, MPEG-2.5,
Layer2, Layer3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
22
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
Television System
AC 100 - 240 V ~ 50 / 60 Hz
ATSC, NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
75 Ω
Program Coverage
External Antenna Impedance
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Less than 80 %
Operating Humidity
Storage Temperature
Storage Humidity
Environment
condition
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
32LB550B
(32LB550B-UC/UZ)
42LB5500
(42LB5500-UC/UZ)
MODELS
731 x 480 x 208 (mm)
28.7 x 18.8 x 8.1 (inches)
731 x 437 x 56.5 (mm)
28.7 x 17.2 x 2.2 (inches)
5.9 kg (13.0 lbs)
959 x 611 x 218 (mm)
37.7 x 24.0 x 8.5 (inches)
959 x 570 x 56.2 (mm)
37.7 x 22.4 x 8.5 (inches)
9.5 kg (20.9 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
5.7 kg (12.5 lbs)
9.2 kg (20.2 lbs)
Current Value / Power consumption
1.1 A / 65 W
1.0 A / 100 W
49LB5500
(49LB5500-UC/UZ)
55LB5500
(55LB5500-UC/UZ)
MODELS
1,105 x 694 x 247 (mm)
43.5 x 27.3 x 9.7 (inches)
1,105 x 652 x 56.5 (mm)
43.5 x 25.6 x 2.2 (inches)
13.6 kg (29.9 lbs)
1,241 x 769 x 247 (mm)
48.8 x 30.2 x 9.7 (inches)
1,241 x 724 x 57.5 (mm)
48.8 x 28.5 x 2.2 (inches)
18.2 kg (40.1 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
13.2 kg (29.1 lbs)
17.8 kg (39.2 lbs)
Current Value / Power consumption
1.1 A / 110 W
1.3 A / 130 W
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
23
32LB560B
(32LB560B-UH/UZ)
39LB5600
(39LB5600-UH/UZ)
MODELS
32LB5600
(32LB5600-UH/UZ)
732 x 481 x 207 (mm)
28.8 x 18.9 x 8.1 (inches)
732 x 431 x 55.5 (mm)
28.8 x 16.9 x 2.1 (inches)
6.2 kg (13.6 lbs)
885 x 567 x 218 (mm)
34.8 x 22.3 x 8.5 (inches)
885 x 524 x 55.5 (mm)
34.8 x 20.6 x 2.1 (inches)
8.3 kg (18.2 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
6.0 kg (13.2 lbs)
8 kg (17.6 lbs)
Current Value / Power consumption
1.1 A / 65 W
0.9 A / 90 W
42LB5600
MODELS
(42LB5600-UH/UZ)
961 x 610 x 218 (mm)
37.8 x 24.0 x 8.5 (inches)
961 x 567 x 55.5 (mm)
37.8 x 22.3 x 2.1 (inches)
9.5 kg (20.9 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
9.2 kg (20.2 lbs)
Current Value / Power consumption
1.0 A / 100 W
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
24
HDMI (PC) supported mode
Component supported mode
Horizontal
Resolution
Vertical
Horizontal
Resolution
Vertical
Frequency (kHz) Frequency (Hz)
Frequency (kHz) Frequency (Hz)
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
1360 x 768
1152 x 864
1280 x 1024
1920 x 1080
31.468
31.469
31.469
37.879
48.363
47.712
54.348
63.981
67.50
70.09
70.08
59.94
60.31
60.00
60.015
60.053
60.02
60.00
15.73
15.73
31.47
31.50
44.96
45.00
33.72
33.75
26.97
27.00
33.71
33.75
67.432
67.50
59.94
60.00
59.94
60.00
59.94
60.00
59.94
60.00
23.976
24.00
29.97
30.00
59.94
60.00
720 x 480i
720 x 480p
1280 x 720p
1920 x 1080i
For 42/49/55LB5500, 32/39/42LB5600
1920 x 1080p
HDMI (DTV) supported mode
Horizontal
Frequency (kHz) Frequency (Hz)
Vertical
Resolution
720 x 480p
31.47
31.50
44.96
45.00
33.72
33.75
26.97
27.00
33.71
33.75
67.432
67.50
59.94
60.00
59.94
60.00
59.94
60.00
23.976
24.00
29.97
30.00
59.94
60.00
1280 x 720p
1920 x 1080i
1920 x 1080p
Component port connecting information
Component ports on the TV
Y
PB
PR
Y
Y
Y
Y
PB
PR
B-Y R-Y
Video output ports on DVD player
Cb
Pb
Cr
Pr
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
25
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan.
CAUTION
• Before cleaning, turn the power off and disconnect the power cord and all other cables.
• When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet, and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
• Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or
lubricants, as these may damage the screen’s finish and cause discoloration.
• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING / EXTERNAL CONTROL DEVICE SETUP
26
TROUBLESHOOTING
Problem
Solution
• Check if anything such as tape has been placed over the receiver.
Cannot control the TV with • Check if there is any obstacle between the product and the remote
the remote control.
control.
• Replace the batteries with new fresh ones.
• Check if the product is turned on.
No image display and no
sound is produced.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
• Check the power control settings. The power supply may be interrupted.
• Check if the Off Time / Sleep Timer feature is activated in the
TIME settings.
The TV turns off suddenly.
• If there is no signal while the TV is on, the TV will turn off automatically
after 15 minutes of inactivity.
EXTERNAL CONTROL DEVICE SETUP
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.
WALL OR CEILING MOUNTYOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.
CE.org/safety
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
Trade Name: LG
Model: 32LB550B-UC, 42LB5500-UC,
49LB5500-UC, 55LB5500-UC,
32LB560B-UH, 32LB5600-UH,
39LB5600-UH, 42LB5600-UH,
32LB550B-UZ, 42LB5500-UZ,
49LB5500-UZ, 55LB5500-UZ,
32LB560B-UZ, 32LB5600-UZ,
39LB5600-UZ, 42LB5600-UZ
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave. Englewood Cliffs NJ
07632 U.S.A
LG Customer Information Center
1-800-243-0000
1-888-865-3026
1-888-542-2623
USA, Consumer User
USA, Commercial User
CANADA
Register your product Online!
TEL: 201-266-2534
The model and serial numbers of the TV are
located on the back and on one side of the
TV. Record them below should you ever need
service.
This product qualifies for ENERGY
STAR in the factory default (Home
Use) setting. Changing the factory
default settings or enabling other
features may increase power consumption that
could exceed the limits necessary to quality for
ENERGY STAR.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|