Samsung Digital Camera TL100 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.  
Danger  
Warning  
DANGER indicates an imminently hazardous situation which, if not  
avoided, will result in death or serious injury.  
WARNING indicates a potentially hazardous situation which, if not  
avoided, could result in death or serious injury.  
å Do not attempt to modify this camera in any way. To do so may  
result in fire, injury, electric shock or severe damage to you or  
your camera. internal inspection, maintenance and repairs should  
only be carried out by your dealer or Samsung Camera Service  
centre.  
å Please do not use this product in close proximity to flammable or  
explosive gases, as this could increase the risk of explosion.  
å Should any form of liquid or a foreign object enter the camera,  
do not use it. Switch off the camera, and then disconnect the  
power source. You must contact your dealer or Samsung Camera  
Service centre. Do not continue to use the camera as this may  
cause a fire or electric shock.  
å Do not insert or drop metallic or inflammable foreign objects into  
the camera through access points e.g. the memory card slot and  
battery chamber. This may cause a fire or electric shock.  
å Do not operate this camera with wet hands. This could pose a  
risk of electric shock.  
å Do not use the flash in close proximity to people or animals.  
Positioning the flash too close to your subject’s eyes may cause  
eyesight damage.  
å For safety reasons keep this product and accessories out of  
reach of children or animals to prevent accidents e.g.:  
- Swallowing battery or small camera accessories. If an accident  
should occur, please consult a doctor immediately.  
- There is the possibility of injury from the camera’s moving parts.  
å Battery and camera may become hot during prolonged use and it  
may result in camera malfunction. Should this be the case, allow  
the camera to sit idle for a few minutes to allow it time to cool.  
å Do not leave this camera in places subject to extremely high  
temperatures, such as a sealed vehicle, direct sunlight or other  
places of extremes in temperature. Exposure to extreme  
temperatures may adversely affect the camera’s internal  
components and could cause a fire.  
å
When in use, do not cover the camera or Charger. This may cause  
heat to build up and distort the camera body or cause a fire. Always  
use the camera and its accessories in a well-ventilated area.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution  
Contents  
007 System chart  
CAUTION indicates a potentially hazardous situation which, if not  
avoided, may result in a minor or moderate injury.  
READY  
007  
007  
Package Contents  
Sold Separately  
å Leaking, overheating, or damaged battery could result in fire or injury.  
- Use battery with the correct specification for the camera.  
- Do not short circuit, heat or dispose of battery in fire.  
- Do not insert the battery with the polarities reversed.  
å Remove the battery when not planning to use the camera for a  
long period of time. Otherwise the battery may leak corrosive  
electrolyte and permanently damage the camera’s components.  
å Do not fire the flash while it is in contact with hands or objects. Do  
not touch the flash after using it continuously. It may cause burns.  
å Do not move the camera while it is switched on, if you are using  
the AC adapter. After use, always switch off the camera before  
unplugging the cable from the wall socket. Then make sure that  
any connector cords or cables to other devices are disconnected  
before moving the camera. Failure to do so may damage the  
cords or cables and cause a fire or electric shock.  
008 Identification of features  
008  
009  
010  
010  
011  
011  
011  
Front & Top  
Back  
Bottom  
5 Function button  
Self-timer lamp  
Camera Status Lamp  
Mode icon  
012 Connecting to a Power Source  
014 Inserting the memory card  
015 Instructions on how to use the memory card  
å Take care not to touch the lens or lens cover to avoid taking an  
unclear image and possibly causing camera malfunction.  
å Avoid obstructing the lens or the flash when you capture an image.  
å When using this camera in low temperatures, you may experience  
the following. These are not camera malfunctions and usually  
recover at normal temperature.  
- It takes longer to turn on the LCD monitor and the colour may  
differ from the subject.  
- When changing the composition, there may be an after image on  
the LCD monitor.  
017 LCD monitor indicator  
018 How to use the menu  
019 Starting the recording mode  
RECORDING  
019  
019  
020  
020  
021  
Selecting modes  
How to use the Program mode  
How to use the Movie clip mode  
Recording the movie clip without sound  
Pausing while recording a movie clip  
(Successive Recording)  
å Credit cards may be demagnetized if left near case. Avoid leaving  
magnetic strip cards near the case.  
å Never connect the 20 pin connector to the USB port of a PC. This  
021 Things to Watch Out for When Taking  
Pictures  
carries a high risk of computer malfunction.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
022 Using the camera buttons to set the camera  
022 POWER button  
039  
039  
040  
041  
042  
042  
043  
043  
044  
Frame Guide  
Auto Focus type  
Photo Style Selector  
Image Adjust  
023 SHUTTER button  
023 Smart button  
023 Mode switch  
DIS  
024 Zoom W/T Lever  
025 Info (DISP) / Up button  
026 Macro / Down button  
027 Focus lock  
Movie Clip frame stabiliser  
Voice Memo  
Voice Recording  
Recording the movie clip without voice  
027 Flash / Left button  
029 Self-timer / Right button  
031 MENU button  
045 Sound menu  
045 Sound  
SETUP  
031 OK button  
045  
045  
045  
045  
046  
046  
Volume  
031 Functions  
Start up sound  
Shutter sound  
Beep Sound  
AF sound  
032  
How to Enable Functions Using the  
MENU Button  
Exposure compensation  
White balance  
ISO  
032  
033  
034  
034  
036  
037  
037  
038  
038  
Self Portrait  
046 Setup menu  
046 Display  
Face Detection  
Image Size  
046  
046  
047  
047  
047  
Language  
Quality / Frame rate  
ACB  
Function Description  
Start up image  
Display Bright  
Quick view  
Metering  
Drive mode  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
047  
Display SAVE  
059 Play & Pause / OK button  
060 Left / Right / Down / MENU button  
060 Delete button  
048 Settings  
048  
048  
049  
049  
049  
050  
050  
051  
051  
052  
Formatting a memory  
Initialisation  
061 Setting up the play back function using  
the LCD monitor  
Setting up the Date / Time / Date type  
Time Zone  
063 Edit  
File name  
063  
064  
064  
065  
Resize  
Imprinting the recording date  
Auto power off  
Rotating an image  
Photo Style Selector  
Image Adjust  
Auto Focus lamp  
Selecting Video out type  
Setting the USB  
067 View  
067 Starting the Multi Slide Show  
067  
068  
068  
069  
069  
Start the Multi Slide Show  
Selecting Images  
053 Starting play mode  
PLAY  
053  
053  
054  
054  
055  
Playing back a still image  
Configure Multi Slide Show effects  
Setting play interval  
Playing back a movie clip  
Movie clip capture function  
Playing back a recorded voice  
Playing back a voice memo  
Setting Background Music  
069 File Options  
069  
070  
070  
071  
073  
Deleting images  
055 LCD monitor Indicator  
Protecting images  
Voice memo  
DPOF  
056 Using the camera buttons to set the camera  
056 Play mode button  
056 Thumbnail / Enlargement Lever  
Copy To Card  
056  
059 Info (DISP) / Up button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart Album  
5
Contents  
092 Setting up the application software  
094 Starting PC mode  
074 Smart mode  
SMART MODE  
074 Smart mode display  
075 Starting Smart mode  
097 Removing the removable disk  
098 Samsung Master  
075  
076  
077  
Selecting modes  
101 Setting up the USB Driver for MAC  
101 Using the USB Driver for MAC  
102 FAQ  
How to use Smart Auto mode  
How to use Smart Movie Clip mode  
SMART  
SETUP MODE  
077 Setting up the Smart menu  
079 Smart Play mode display  
SMART  
PLAY MODE  
079 Setting up the Smart Play menu  
080 PictBridge  
PICTBRIDGE  
APPENDIX  
081 PictBridge : Picture Selection  
081 PictBridge : Print Setting  
082 PictBridge : Reset  
082 Important notes  
084 Warning indicator  
085 Before contacting a service centre  
087 Specifications  
090 Software Notes  
SOFTWARE  
6
090 System Requirements  
091 About the software  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System chart  
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the  
optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ  
from exact appearance.  
Package Contents  
Camera strap  
AD63-02596A /  
AD63-02604A  
Software CD  
(see p.91)  
AD46-00237A  
Rechargeable battery  
AC adapter / USB cable  
AD44-00131A / AD39-00165A  
Camera  
4302-001227  
User manual,  
Product warranty  
AD68-03936A  
Sold Separately  
SD/SDHC memory card / MMC  
(see p.16)  
AV cable  
AD39-00146A  
Camera case  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of features  
Front & Top  
Zoom T Lever (Digital zoom)  
Zoom W Lever (Thumbnail)  
Power button  
Smart button  
Flash  
Shutter button  
Speaker  
Self-timer lamp /  
AF Lamp  
USB / AV / DC terminal  
Lens/ Lens cover  
Microphone  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of features  
Back  
Camera status lamp  
Mode switch  
LCD monitor  
Strap eyelet  
5 function button  
Delete button  
MENU button  
Play mode button  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of features  
Bottom  
5 Function button  
Battery chamber  
Information / Up button  
OK / Play & Pause  
button  
Self-timer /  
Right button  
Flash /  
Left button  
Battery  
holder  
Macro / Down button  
Battery chamber cover  
Memory card slot  
Tripod socket  
Ä
To open the battery chamber cover, slide it in the direction shown  
above.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of features  
Self-timer lamp  
Mode icon  
Icon  
Status  
Description  
Refer to page 19/75 for more information about the camera mode  
setting.  
- For the first 8 seconds, the lamp blinks at 1 second  
intervals.  
- For the final 2 seconds, the lamp blinks quickly at  
0.25-second intervals.  
Blinking  
MODE  
ICON  
Program  
Movie  
For the 2 seconds, the lamp blinks quickly at  
0.25-second intervals.  
Blinking  
Blinking  
Blinking  
SMART  
MODE  
A picture will be taken after about 10 seconds and 2  
seconds later a second picture will be taken.  
Smart Auto  
Smart Movie  
After pressing the Shutter button, the image is taken  
in accordance with the subject’s movement.  
ICON  
Camera Status Lamp  
Status  
Description  
The lamp turns on and off when the camera  
is ready to take a picture  
Power on  
The lamp blinks while saving the image data and  
turns off when the camera is ready to take a picture  
After taking a picture  
When flash battery is charging The lamp blinks  
When the USB cable is  
inserted to a PC  
The lamp lights up  
(LCD monitor turns off after initializing the device)  
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)  
When the USB cable is  
The lamp blinks  
inserted into a printer  
When the printer is printing The lamp blinks  
The lamp turns on  
(The camera focus on the subject)  
When the AF activates  
The lamp blinks  
(The camera doesn’t focus on the subject)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Power Source  
Important information about battery usage.  
You should use the rechargeable battery SLB-07A supplied with the  
camera. Be sure to charge the battery before using the camera.  
å When camera is not in use, turn off the power.  
å Please remove the battery if the camera will not be used  
for long periods. Batteries can lose power over time and are  
prone to leaking if kept inside the camera.  
å Low temperatures (below 0°C) can affect the performance  
of the battery and you may experience reduced battery life.  
å Batteries will usually recover at normal temperatures.  
å During extended use of the camera, the camera body may  
become warm. This is perfectly normal.  
Ê SLB-07A rechargeable battery Specification  
Model  
SLB-07A  
Type  
Lithium lon  
720mAh  
Capacity  
Voltage  
3.7V  
Charging time  
Approximately 120 Minutes  
Ê Number of images and battery life: Using the SLB-07A  
Ê If you connect the AC adapter to the USB cable, you can use it  
as an AC cable and recharge the spare battery with it.  
Battery life /  
Conditions  
Number of images  
Using the fully charged battery, Auto  
mode, 12M image size, Fine image  
quality, Shot to shot interval: 30Sec.  
- Using an AC cable  
: Connect the AC adapter to the  
USB cable. It can be used as a  
power cable.  
Approx. 100 MIN / Changing the zoom position between  
Approx. 200 shots the Wide and the Tele after every shot.  
Still image  
Using the flash on every second shot.  
Using the camera for 5 minutes and  
then powering it off for 1 minute.  
Using the fully charged battery  
Approx. 80 MIN 800x592 image size  
20fps frame rate  
- Using a USB cable  
Movie  
: Remove the AC adapter.You can  
download stored images to your  
PC (p.94) or supply the power  
to your camera through the USB  
cable.  
Ä These figures are measured under Samsung’s standard conditions  
and shooting conditions and may vary depending on the user’s  
methods.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Power Source  
Important information about USB cable usage.  
å Use a USB cable with the correct specification.  
å If the camera is connected to the PC through a USB hub :  
connect the camera directly to the PC.  
å If the camera and other devices are connected to the PC at  
the same time : remove other device.  
å Camera can not be detected using the front side USB port  
of computer. In this case, use the back side USB port of  
computer.  
å Before inserting any cables or AC adapter, check the directions and  
do not insert by force. It may cause breakage of cable or camera.  
å
å
If the charging LED of the AC Charger does not turn on or blink  
after inserting the rechargeable battery, please check whether the  
battery is inserted correctly.  
If you charge the battery with the camera power on, the battery won’t  
be fully charged. Turn the camera off while charging the battery.  
å If the USB port of the PC doesn’t meet the Power output  
standard (5V, 500mA), the camera may not be charged.  
Ê Charging LED of the AC Adapter  
Charging LED  
Red LED is on  
Green LED is on  
Being Charged  
Charging is complete  
Ê How to charge the rechargeable battery  
Charging error  
Orange colored LED is off or blinking  
å
å
If you insert the fully discharged battery to charge it, do not turn on  
the camera at the same time. The camera may not be turned on  
because of the low battery capacity. Charge the battery for more  
than 10 minutes before using the camera.  
Do not use the flash frequently or take a movie clip with the fully  
discharged battery charged for a short time. Even if the charger  
is inserted, the camera power may be turned off because the  
rechargeable battery is discharged again.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Power Source  
Inserting the memory card  
Ê Insert the battery as shown  
Ê Insert the memory card as shown.  
- If the camera does not turn on  
after you have inserted battery,  
please check whether the  
battery (+ / -).  
- Turn off the camera’s power  
before inserting the memory card.  
- Have the front of the memory  
card facing toward the back of  
the camera (LCD monitor) and  
the card pins toward the front of  
the camera (Lens).  
- When the battery chamber  
cover is opened, do not force  
the battery chamber cover,  
this may damage it.  
- Do not insert the memory card  
the wrong way round. Doing so  
may damage the memory card  
slot.  
Ê There are 4 indicators for battery condition that are displayed on  
the LCD monitor.  
Battery  
indicator  
Low battery  
capacity  
(Prepare to  
recharge or use recharge or use  
spare battery) spare battery)  
Low battery  
capacity  
(Prepare to  
Battery empty.  
(Recharge  
or use spare  
battery)  
The battery is  
fully charged  
Battery  
status  
When using the camera and the battery in a place that is excessively cold or hot,  
the battery status on the LCD may be different from the actual battery status.  
Ä
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions on how to use the memory card  
å Be sure to format the memory card (see p.48) if you are using  
a newly purchased memory card for the first time, if it contains  
data that the camera cannot recognise, or if it contains images  
captured with a different camera.  
å Turn off the camera power whenever the memory card is being  
inserted or removed.  
å If the memory card is subjected to any of the following, the  
recorded data may become corrupted :  
- When the memory card is used incorrectly.  
- If the power is switched off or the memory card is removed  
while recording, deleting (formatting) or reading.  
å Samsung cannot be held responsible for lost data.  
å Repeated use of the memory card will eventually reduce the  
memory card’s performance. Should this be the case, you will  
need to purchase a new memory card. Wear and tear on the  
memory card is not covered by the Samsung warranty.  
å The memory card is an electronic precision device.  
Do not bend, drop or subject the memory card to any heavy  
impact.  
å
It is advisable to copy important data onto other media as back-up  
e.g. floppy disks, hard disks, CD etc.  
å If there is insufficient memory available :  
A [Memory Full] message will appear and the camera will not  
operate. To optimise the amount of memory in the camera,  
replace the memory card or delete unnecessary images stored  
on the memory card.  
å Do not store the memory card in an environment with strong  
electronic or magnetic fields, e.g. near loud speakers or TV  
receivers.  
å Please do not use or store in an environment where there are  
extremes in temperature.  
å
Don't remove the memory card when the camera status lamp is  
blinking as this may cause damage to data in the memory card.  
å Do not allow the memory card to become dirty or to come into  
contact with any liquid. Should this happen, clean the memory  
card with a soft cloth.  
å Please keep the memory card in its case when not in use.  
å During and after periods of extended use, you may notice that the  
memory card is warm. This is perfectly normal.  
å Do not use a memory card that is used in another digital camera.  
To use the memory card in this camera, format the memory card  
using this camera.  
å Do not use a memory card formatted by another digital camera or  
memory card reader.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instructions on how to use the memory card  
When using a 1GB SD memory, the specified shooting capacity will be  
as follows. These figures are approximate as image capacities can be  
affected by variables such as subject matter and memory card type.  
The camera can use SD/SDHC Memory Cards and MMC (Multi  
Media Cards).  
Recorded image Super  
Card pins  
Fine  
30 FPS 20 FPS 15 FPS  
Normal  
size  
Fine  
About  
169  
About  
240  
About  
365  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Write protect switch  
About  
196  
About  
270  
About  
411  
About  
231  
About  
308  
About  
481  
Label  
Still  
image  
About  
246  
About  
328  
About  
519  
[SD (Secure Digital) memory card]  
About  
365  
About  
493  
About  
705  
å The SD/SDHC memory card has a write protect switch that  
prevents image files from being deleted or formatted. By sliding  
the switch to the bottom of the SD/SDHC memory card, the data  
will be protected. By sliding the switch to the top of the SD/SDHC  
memory card, the data protection will be cancelled.  
å Slide the switch to the top of the SD/SDHC memory card before  
taking a picture.  
About  
548  
About  
680  
About  
759  
About  
986  
About  
1095  
About  
1232  
About  
32'48"  
-
-
-
-
-
-
-
-
-
*Movie  
clip  
About  
33'43"  
About  
01:03'47"  
-
-
About  
01:55'08"  
About  
02:00'00"  
å
å
å
The Zoom W/T lever doesn’t function during the movie recording.  
The recording times can be changed by the zoom operation.  
Several videos were recorded in succession to determine the  
total recording time.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD monitor indicator  
Ê
The LCD monitor displays information about the shooting functions  
No.  
5
Description  
Icons  
Page  
-
and selections.  
Memory card icon /  
Internal memory icon  
6
7
Battery  
Flash  
p.14  
p.27  
p.29  
p.26  
p.40  
p.34  
p.42  
8
Self-timer  
Macro  
9
10  
11  
12  
Photo Style Selector  
Face Detection  
DIS  
Image Adjust /  
Without Sound  
13  
14  
p.41/44  
Date / Time  
2009/01/01 01:00 PM  
p.49  
p.21  
p.39  
p.38  
p.38  
p.37  
p.36  
p.34  
p.33  
p.32  
15 Camera shake Warning  
[Image & Full Status]  
16  
17  
18  
Auto Focus Frame  
Drive mode  
No.  
1
Description  
Icons  
Page  
p.19  
Metering  
Recording mode  
19 Image Quality / Frame Rate  
Optical / Digital Zoom bar /  
Digital Zoom rate  
2
3
p.24  
p.43  
p.16  
p.16  
20  
21  
22  
Image Size  
ISO  
Voice Memo  
Number of available shots  
remaining  
00001  
White Balance  
4
23 Exposure compensation  
Remaining time  
00:00:00  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to use the menu  
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.  
EV  
Functions  
White Balance  
Sound  
ISO  
Display  
Face Detection  
Photo Size  
Quality  
Settings  
ACB  
Exit  
Change  
2. Use the up or down buttons to navigate through the menus.  
EV  
Volume  
Press the  
UP or DOWN  
button.  
Functions  
Sound  
Functions  
White Balance  
ISO  
Start Sound  
Sound  
Display  
Settings  
Shutter Sound  
Display  
Face Detection  
Photo Size  
Quality  
Beep Sound  
AF Sound  
Settings  
Self-Portrait  
ACB  
Exit  
Change  
Exit  
Change  
3. Use the left or right buttons to select a sub menu.  
Volume  
:Medium  
Volume  
Off  
Volume  
Press the  
LEFT or  
RIGHT button.  
Press the  
LEFT or  
RIGHT button.  
Functions  
Sound  
Start Sound  
Start Sound  
:Off  
:1  
Start Sound  
Low  
Shutter Sound  
Medium  
Shutter Sound  
Shutter Sound  
High  
Display  
Settings  
Beep Sound  
AF Sound  
Beep Sound  
AF Sound  
:1  
Beep Sound  
AF Sound  
:On  
:On  
:On  
:On  
Self-Portrait  
Self-Portrait  
Self-Portrait  
Exit  
Change  
Exit  
Back  
Back  
Set  
4. Select a submenu and click the OK button to save settings and return to the previous window.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting the recording mode  
Selecting modes  
How to use the Program mode (  
)
Selecting the automatic mode will configure the camera with  
optimal settings. You can still manually configure all functions  
except the aperture value and shutter speed.  
Ê Mode selection using the Mode switch  
You can use the Mode switch on the back of your camera to select  
the correct mode.  
1. Insert the batteries (p.14). Insert the  
batteries taking note of the polarity  
(+ / -).  
2. Insert the memory card (p.14).  
As this camera has a 31MB internal  
memory, you do not need to insert  
the memory card. If the memory  
card is not inserted, an image will be  
stored in the internal memory. If the memory card is inserted,  
an image will be stored on the memory card.  
3. Close the battery chamber cover.  
4. Press the power button to turn on the camera.  
5. Use the Mode switch to select Program mode (p.19).  
6. Press the Menu button to configure advanced functions.  
(See p.31 for further details.)  
[Program mode]  
[Movie Clip mode]  
å
If the auto focus frame turns to red when you press the shutter  
button down half way, it means that the camera cannot focus  
on the subject. Should this be the case, the camera is unable to  
capture an image clearly.  
å Avoid obstructing the lens or the flash when you capture an image.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting the recording mode  
Recording the movie clip without sound  
How to use the Movie clip mode (  
)
You can record the movie clip without sound.  
A movie clip can be recorded for as long as the available recording  
time (maximum of 20 minutes) of the memory capacity allows.  
Steps from 1 -3 are the same as those for  
MOVIE mode.  
1. Use the Mode switch to select Movie  
Clip mode. (The Movie clip mode icon  
and available recording time will display  
on the LCD monitor.).  
2. Point the camera towards the subject  
and compose the image by using the  
LCD monitor.  
3. Press the Shutter button once and movie clips are recorded for  
up to 20 minutes. Movie clips will still be recorded if the shutter  
button is released. If you wish to stop recording, press the shut-  
ter button again.  
4. Press the Menu button.  
5. Press the Up / Down button to select the  
[Functions] menu and press the Right  
button.  
6. Select the [Voice] menu by pressing the Up / Down button and  
press the OK button.  
7. Select the [Off] menu by pressing the Left / Right button.  
8. Press the OK button. You can record a movie without sound.  
Ä See p.44 for further details.  
Ä Image size and type are listed below.  
- Image size  
: 800x592, 640x480, 320x240 (Selectable)  
- Movie clip file type : AVI (MPEG-4)  
- Frame Rate  
: 30 FPS, 20 FPS, 15 FPS (Selectable)  
- The frame rate can be selected when the following image size  
is selected.  
800x592: 20FPS selectable  
640x480, 320x240: 30FPS, 15FPS selectable  
- If the recording time is takes longer 20 minutes, the recording  
is stopped and then saved.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting the recording mode  
Things to Watch Out for When Taking Pictures  
å Pressing the shutter button down half way.  
Lightly press the shutter button to confirm focus and flash battery  
charge. Press the shutter button all way down to take the picture.  
Pausing while recording a movie clip (Successive Recording)  
This camera allows you to temporarily stop during unwanted  
scenes, while recording a movie clip. Using this function, you can  
record your favourite scenes into a movie clip without having to  
create multiple movie clips.  
Ê Using Successive Recording  
Steps from 1-2 are the same as those for  
MOVIE CLIP mode.  
[Press the shutter button]  
[Lightly press the shutter button]  
3. Press the shutter button and movie  
clips are recorded for as long as the  
available recording time. Movie clips  
will still be recorded if the shutter button  
is released.  
4. Press the OK button to pause recording.  
å The available memory capacity may vary depending on shooting  
conditions and camera settings.  
å When the Flash Off, Slow synchro mode or DIS mode is selected  
in a low lighting condition, the camera shake warning indicator  
( Ã ) may appear on the LCD monitor. In this case, use a tripod,  
support the camera on a solid surface or change to flash shot  
mode.  
Stop  
Record  
5. Press the OK button again to resume the recording.  
6. If you wish to stop recording, press the shutter button again.  
å
Shooting against the light : Please do not take pictures against the  
sun. Doing so may make the picture  
dark. To take a picture against the light,  
please use the fill-in flash (see page 28),  
spot metering (see page 38), exposure  
compensation (see page 32) or ACB (see  
page 37) function.  
å
Avoid obstructing the lens or the flash when you capture an image.  
å Compose the image by using the LCD monitor.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the camera buttons to set the camera  
Things to Watch Out for When Taking Pictures  
å Under certain conditions the auto focus system may not perform  
as expected.  
The recording mode function can be set up by using the camera buttons.  
- When photographing a subject that has little contrast.  
- If the subject is highly reflective or shiny.  
- If the subject is moving at high speed.  
- When there is strong reflected light, or when the background is  
very bright.  
- When the subject matter has only horizontal lines or the subject  
is very narrow (such as a stick or flagpole).  
- When the surroundings are dark.  
POWER button  
Used for turning the camera’s power on / off.  
If there is no operation during the specified  
time, the camera's power will be turned off  
automatically to save battery life.  
Refer to page 50 for more information  
about the auto power off function.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mode switch  
SHUTTER button  
Used for taking an image or recording voice in the RECORDING  
mode.  
You can use the Mode switch on the back  
of your camera to select the correct mode.  
å In MOVIE CLIP mode  
Pressing the shutter button down fully  
starts the process for recording a movie  
clip. Press the shutter button once and  
the movie clip is recorded for as long  
as the available recording time in the  
memory allows. If you wish to stop recording, press the shutter  
button again.  
•
Normal mode  
When recording a movie clip : Push the Mode switch down to select  
Movie Clip mode (The time available  
for recording movie clips is displayed  
on the LCD monitor).  
å In STILL IMAGE mode  
When capturing a still image : Push the Mode switch up to select  
Program mode.  
Pressing the shutter button down halfway activates the autofocus  
and checks the condition of the flash. Pressing the shutter button  
down fully takes and stores the image. If you select voice memo  
recording, the recording will start after the camera has finished  
storing the image data.  
•
Smart mode  
When recording a movie clip : Push the Mode switch down to select  
Smart Movie Clip mode (The time  
available for recording movie clips is  
displayed on the LCD monitor).  
Smart button  
When capturing a still image : Push the Mode switch up to select  
Smart Auto mode.  
You can use the Smart button at the top  
of your camera to select the correct smart  
mode.  
Ä See p.75 for further details.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom W/T Lever  
When the menu window is not displayed,  
this lever is used to control the optical or  
digital zoom.  
This camera has a 3X optical zoom and  
a 5X digital zoom function. Using both  
will offer a total zoom ratio of 15X.  
Ê WIDE Zoom  
Optical zoom WIDE : Move the Zoom W/T lever to the left in  
optical zoom mode to see subjects in the  
distance. Continue to move the Zoom W/T  
lever to the left to disable optical zoom.  
Ê TELE Zoom  
Optical zoom TELE : Move the Zoom W/T lever to the right to  
see the subject closer.  
Digital zoom TELE : Move the Zoom W/T lever to the right once  
again in optical 3x zoom mode to enable  
digital zoom (software tele). Stop moving  
the Zoom W/T lever to stop the operation  
of digital zoom (tele). In digital 5x zoom  
mode, digital zoom is disabled even if you  
operate the Zoom W/T lever.  
[TELE zoom]  
[Optical zoom 2X]  
[WIDE zoom]  
Digital zoom WIDE : Move the Zoom W/T lever to the left  
in digital zoom mode to enable digital  
Optical zoom  
zoom (software wide). Stop moving the  
Zoom W/T lever to stop the operation of  
digital zoom. Continue to move the Zoom  
Digital zoom  
W/T lever to the left when digital zoom is  
disabled to disable optical zoom (optical  
tele).  
[TELE zoom]  
[Digital zoom 5.0X]  
[WIDE zoom]  
[Digital zoom 5.0X]  
[TELE zoom]  
[WIDE zoom]  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom W/T Lever  
Info (DISP) / Up button  
å
å
å
å
Images taken using the digital zoom may take a little longer for  
While the menu is showing, the Up button operates as a direction button.  
In the recording modes or playback mode, pressing this button will  
display the image information.  
the camera to process. Allow time for this to take place.  
If the Zoom W/T lever is being pressed during the Movie shots,  
the voice will not be recorded.  
You may notice a decrease in image quality when using the  
digital zoom.  
To view a clearer digital zoom image, press the shutter button  
halfway at the maximum optical zoom position and move the  
Zoom W/T lever to the right again.  
å
å
The digital zoom does not work in Movie Clip, Smart Auto and  
Smart Movie Clip modes.  
Take care not to touch the lens to avoid taking an unclear image  
and possibly causing camera malfunction. If the image is dim, turn  
the camera power off and on again to modify the lens position.  
Take care not to press the lens as this may cause a camera  
malfunction.  
When the camera is turned on, take care not to touch the camera’s  
moving lens parts as this may cause the resulting image to be dim  
and unclear.  
[Filming screen]  
[Information screen]  
å
å
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
Macro  
/ Down button  
Ê Types of focus mode and focus range (W : Wide, T : Tele)  
While the menu is showing, the Down button operates as a direction  
button. When the menu is not showing, you can use the MACRO  
(Unit: cm)  
Mode  
Program (  
)
(
) / DOWN button to take macro pictures.  
The distance ranges are shown below. Press the Macro button until  
the desired macro mode indicator appears on the LCD monitor.  
Focus Type  
macro (  
)
Normal  
W : 10 ~ 80  
T : 50 ~ 80  
W : 80 ~ Infinity  
T : 80 ~ Infinity  
Focus range  
å When the macro mode is selected, be particularly careful to avoid  
camera shake.  
å When you take a picture within 40cm (Wide zoom) or 50cm  
(Tele zoom) in the Macro mode, select the FLASH OFF mode.  
[Auto Focus]  
[Macro (  
)]  
Ê Available focusing method, by recording mode  
( o : Selectable, ä : Infinity focus range)  
Mode  
Macro  
Normal  
o
o
o
o
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
Focus lock  
Flash  
/ Left button  
When the menu is displayed on the LCD  
monitor, pressing the LEFT button makes  
the cursor shift to the left tab.  
When the menu is not displayed on the  
LCD monitor, the LEFT button operates as  
the FLASH ( ) button.  
To focus on a subject not positioned in the centre of the picture, use  
the focus lock function.  
Ê Using the Focus Lock  
1. Ensure the subject is in the centre of the autofocus frame.  
2. Press the SHUTTER button halfway. When the green auto focus  
frame lights up, it means the camera is focused on the subject.  
Be careful not to press the SHUTTER button all the way down to  
avoid taking an unwanted picture.  
3. With the SHUTTER button still pressed down only halfway, move  
the camera to recompose your picture as desired, and then  
press the SHUTTER button completely to take the picture. If you  
release your finger from the SHUTTER button, the focus lock  
function will be cancelled.  
[Selecting the Auto flash]  
Ê Selecting the flash mode  
1. Use the Mode switch to select a mode other than Movie Clip mode.  
(p.19)  
2. Press the Flash button until the desired flash mode indicator is  
displayed on the LCD monitor.  
3. A flash mode indicator will be displayed on the LCD monitor.  
Use the correct flash to suit the environment.  
(Unit: m)  
Auto macro  
WIDE TELE  
Ê Flash range  
Normal  
WIDE TELE  
Macro  
WIDE TELE  
ISO  
1. The image to be  
captured.  
2. Press the SHUTTER  
button halfway and  
3. Recompose the picture  
and fully depress the  
SHUTTER button.  
AUTO 0.8~3.0 0.8~2.0 0.4~0.8 0.5~0.8 0.4~3.0 0.5~2.0  
focus on the subject.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
Flash  
/ Left button  
å
If you press the shutter button after selecting the flash, the first  
flash fires to check the shooting condition (Flash range and  
Power ratio of flash). Do not move the camera until the second  
flash fires.  
Ê Flash mode indicator  
Icon  
Flash mode  
Description  
If the subject or background is dark, the  
camera flash will operate automatically.  
Auto flash  
å
å
Using the flash frequently will reduce the life of the battery.  
Under normal operating conditions the re-charging time for  
the flash is usually within 4 seconds. If the battery is weak, the  
charging time will be longer.  
The flash does not work in Movie Clip mode.  
Take photographs within the flash range.  
The image quality is not guaranteed if the subject is too close  
or highly reflective.  
When taking an image in poorly lit conditions with the flash,  
there may be a white speck in the captured image. The speck  
is caused by the flash light reflecting off atmospheric dust.  
If a subject or background is dark, the  
Auto & Red eye camera flash will work automatically and  
reduction  
will reduce the red-eye effect by using the  
red-eye reduction function.  
å
å
å
The flash fires regardless of the avail-  
able light. The intensity of the flash will be  
automatically controlled to suit the prevailing  
conditions.  
Fill in flash  
å
The flash operates with a slow shutter speed  
to obtain a balanced correct exposure. In  
poor lighting conditions the camera shake  
Slow synchro  
warning indicator (  
Ã
) will display on the  
LCD monitor.  
When a shot with "red eye" is detected,  
Red-eye reduction this mode will reduce the red-eye effect  
automatically.  
The flash does not fire.  
Select this mode when capturing images in  
a place or situation where flash photography  
is prohibited. When you capture an image  
in poorly lit conditions, the camera shake  
warning indicator ( Ã ) will appear on the  
LCD monitor.  
Flash off  
å
Smart Auto flash (  
) icon will appear in [Smart Auto]  
mode.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
(
)
Self-timer  
/ Right button  
Flash  
/ Left button  
Ê Available flash mode, by recording mode  
Ê Selecting the self-timer  
( o : Selectable)  
1. Select a Recording mode with the  
exception of Voice recording mode. (p.19)  
Mode  
2. Press the SELF-TIMER / RIGHT (  
)
o
o
o
o
o
o
o
button until the desired mode indicator  
displays on the LCD monitor. A 10 second,  
2 second, Double self-timer or Motion timer  
icon appears on the LCD monitor.  
3. When you press the SHUTTER button,  
the picture will be taken after the  
specified time has elapsed.  
(
)
Self-timer  
/ Right button  
[Selecting the 10 SEC  
self-timer]  
When the menu is displayed on the LCD monitor, pressing the Right  
button makes the cursor shift to the right tab.  
Ê Self-timer mode indicator  
When the menu is not displayed on the LCD monitor, the RIGHT  
button operates as the Self-timer (  
when the photographer would also like to be in the image.  
) button. This function is used  
Icon  
Mode  
Description  
10SEC  
Pressing the shutter button will allow an interval  
self-timer of 10 seconds before the image is taken.  
å If you operate the Self-timer button during the self-timer  
operation, the self-timer function is cancelled.  
å Use a tripod to prevent the camera from shaking.  
å In Movie Clip mode, only the 10SEC self-timer will work.  
2SEC Pressing the shutter button will allow an interval  
self-timer of 2 seconds before the image is taken.  
A picture will be taken after about 10 seconds  
and 2 seconds later a second picture will be  
Double  
taken. When using the flash, the 2-second  
self-timer  
self-timer may be delayed for longer than 2  
seconds depending on the flash charging time.  
The camera detects the subject's movement 6  
Motion  
seconds after pressing the Shutter button, and the  
Timer  
picture is taken when the movement is stopped.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
Self-timer  
/ Right button  
In the following cases, the Motion Timer may not operate.  
Ê Motion Timer  
å The focus distance is over 3m.  
å The exposure is too bright or dark  
å In backlight conditions.  
Motion  
Icon & Self-timer lamp  
Blink (1 second interval)  
The detection range of  
Motion Timer  
Pressing the Shuter button after  
setting the Motion Timer  
å The movement is insignificant  
Detecting the subject's movement Blink (0.25 second interval)  
å
The movement is detected beyond  
the center part (50%) of the sensor  
where the movement is recognized.  
Turn on and the image is taken  
No movement is detected  
after 2 seconds  
å If the camera doesn`t sense any  
movement for 30 seconds, or the  
camera doesn’t sense stillness  
after sensing movement  
Ê The Motion Timer flows are as followings. (Movie Clip mode excluded)  
Selecting the Motion Timer à Pressing the Shutter button à  
Confirming the composition (Within 6 sec.)*1 Ã Starting the  
detection (Swing your hands fully)*2 Ã Stopping the detection  
(Do not move) Ã Taking an image (after 2 sec.)  
*1: The camera detects the subject's movement 6 seconds after pressing the  
Shtter button, so confirm the composition within 6 seconds.  
*2: Move your body or hands fully.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU button  
Functions (  
)
- When you press the MENU button, a menu related to each  
camera mode will be displayed on the LCD monitor. Pressing it  
again will return the LCD to the initial display.  
- A menu option can be displayed when the following are selected :  
MOVIE CLIP and STILL IMAGE mode. There is no menu  
available when the voice recording function is selected.  
Use the menu that enables the functions to bring up the menus below:  
Available mode  
Page  
p.32  
p.33  
p.34  
p.34  
p.36  
p.37  
p.37  
p.38  
p.38  
p.39  
p.39  
p.40  
p.41  
p.42  
p.42  
p.43  
Mode  
Menu  
EV  
White Balance  
ISO  
EV  
Functions  
Face Detection  
Photo Size / Movie Size  
Quality / Frame Rate  
ACB  
White Balance  
Sound  
ISO  
Display  
Face Detection  
Photo Size  
Quality  
Settings  
[Pressing the MENU button]  
ACB  
Exit  
Change  
[Menu off]  
[Menu on]  
Metering  
(Functions)  
Drive  
OK button  
- When the menu is displayed on the LCD monitor, this button is  
Frame Guide  
Focus Area  
Photo Style Selector  
Image Adjust  
DIS  
used for shifting the cursor to the sub menu or for confirming data.  
EV  
EV  
Functions  
Sound  
White Balance  
White Balance  
[Pressing the  
OK button]  
ISO  
ISO  
Display  
Face Detection  
Photo Size  
Quality  
Face Detection  
Photo Size  
Quality  
Settings  
Stabiliser  
ACB  
ACB  
Voice  
Exit  
Change  
Exit  
Back  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
How to Enable Functions Using the MENU Button  
Exposure compensation  
1. Press the MENU button in an available mode.  
2. Press the Up / Down button to select the [Functions] menu and  
press the Right/OK button.  
This camera automatically adjusts the exposure according to the  
ambient lighting conditions.  
You can also select the exposure value by using the [EV] menu.  
EV  
EV  
Ê Compensating Exposure  
Functions  
Sound  
White Balance  
White Balance  
ISO  
ISO  
1. Click the Up/Down button from the  
Functions menu to select [EV] (  
2. Use the LEFT and RIGHT buttons to  
set the desired exposure compensation  
factor.  
EV  
Display  
Face Detection  
Photo Size  
Quality  
Face Detection  
Photo Size  
Quality  
).  
Right/OK  
button  
Settings  
ACB  
ACB  
Exit  
Change  
Exit  
Back  
Back  
Move  
3. Press the OK button. The value you  
3. Select a desired menu by pressing the Up / Down button and  
then press the OK button.  
set will be saved and the Exposure Compensation setup mode  
will be closed. If you change the exposure value, the exposure  
EV  
EV  
indicator (  
) will be displayed on the Left of the LCD monitor.  
White Balance  
White Balance  
ISO  
ISO  
Ä A negative exposure compensation value reduces the exposure.  
Note that a positive exposure compensation value increases the  
exposure and the LCD monitor will appear white or you may not  
get good pictures.  
Face Detection  
Photo Size  
Quality  
Face Detection  
Photo Size  
Quality  
Up / Down  
button  
ACB  
ACB  
Exit  
Back  
Exit  
Back  
4. Select a desired menu by pressing the Left / Right button and  
then press the OK button.  
White Balance  
Daylight  
Left / Right  
button  
Back  
Move  
Back  
Move  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Ê Using the Custom White Balance  
White balance  
White balance settings may vary slightly depending on the  
shooting environment. You can select the most appropriate  
white balance setting for a given shooting environment by setting  
up the custom white balance.  
The white balance control allows you to  
adjust the colours to appear more natural.  
White Balance  
1. Select the CUSTOM (  
) menu of  
Back  
Move  
the White Balance and place a sheet  
of white paper in front of the camera  
so that the LCD monitor shows only  
white.  
Mode  
Icon  
Description  
The camera automatically selects the ap-  
propriate white balance settings, depending  
on the prevailing lighting conditions.  
Auto WB  
White paper  
2. OK button  
: selects previous  
custom white balance.  
Shutter button : saves new custom white balance.  
Daylight  
Cloudy  
For taking images outside.  
- The custom white balance value will be applied, starting with  
the next picture you take.  
- The user configured white balance will be remain effective  
until it is overwritten.  
For taking images under a cloudy and  
overcast sky.  
For shooting under daylight fluorescent  
types of three-way fluorescent lighting.  
Fluorescent_H  
Fluorescent_L  
Tungsten  
Shooting under white fluorescent lighting.  
For shooting under tungsten (standard light  
bulb) lighting.  
Allows the user to set the white balance  
according to the shooting condition.  
Custom Set  
Ä Different lighting conditions may cause a colour cast on your images.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Functions (  
)
Face Detection  
ISO  
If you use face detection options, your  
camera can detect a human face. When  
focusing on a human face, the brightness  
of the face is also adjusted. You can also  
capture natural facial expressions by using  
self portrait, smile shot or blink detection.  
You can select the ISO sensitivity when taking pictures.The speed or  
specific light-sensitivity of a camera is rated by ISO numbers.  
[Auto] : The camera's sensitivity is  
automatically changed by  
Face Detection  
Back  
variables such as lighting value  
ISO  
Move  
or subject brightness.  
[ISO 80, 100, 200, 400, 800, 1600, 3200] :  
You can increase the shutter speed while  
Back  
Move  
the same amount of light is present, by increasing the ISO sensitivity.  
However, the image may be saturated in high luminance. The higher  
the ISO value, the higher the camera’s sensitivity to light and therefore  
the greater its capacity to take pictures in dark conditions. However,  
the noise level in the image will increase as the ISO value increases,  
making the image appear coarse.  
Ê Normal  
This mode detects the face position of the subject automatically  
and then sets the focus and exposure. Select this mode for quick  
and easy face picture.  
1. The size and position of the auto  
focus frame is set at the face of the  
subject automatically.  
Ä When [Motion Capture] is set, ISO speed will be set to Auto.  
Ä [ISO] is enabled only in [Program] mode.  
Ä When the ISO 3200 menu is selected, the image size is fixed to  
under 3M.  
2. Press the shutter button halfway.  
The focus frame turns to green  
when the focus is activated.  
3. Press the shutter button fully to take  
a picture.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Ê Beauty Shot  
å This function can detect up to 10 persons.  
å When the camera recognises many people at the same  
time, it will focus on the nearest person.  
Take a photo of a person with options  
to hide facial imperfections.  
å
The Digital zoom is not activated in this mode.  
å When the camera detects a target face, the white colour  
focus frame will be displayed over the target face and the  
grey colour focus frame appears over the remaining faces.  
Press the shutter button halfway down to focus on the face  
and the white focus frame turns green.  
å Return to previous AF mode if face detection was failure.  
å In some conditions this function cannot work properly.  
- When a person wears dark glasses or some part of the  
face is hidden.  
- When the person being taken does not look at the camera.  
- Camera doesn't detect a face as the brightness is too dark  
or too bright.  
- The distance between the camera and object are far.  
å The maximum available Face Detection range is 2.5m (Wide).  
å The nearer the subject, the faster the camera can recognize  
the subject.  
Ê Self Portrait  
When taking pictures of yourself, the area of your face is  
automatically detected so that you can take self pictures more  
easily and quickly.  
1. For self-filming, set the camera lens  
towards the face of the object. It  
automatically detects the face of the  
object, and emits a guiding sound.  
2. Start filming by pressing the shutter  
button.  
å
When locating the face in the center of the screen, it repeatedly  
emits a faster sound unlike the sounds that are emitted when  
the face is not in the center.  
å The guiding sound can be set using the sound setting  
menu. (See p.46)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Ê Smile Shot  
Image Size  
The camera automatically takes a  
picture by detecting the face of the  
subject although you don’t press the  
shutter button. If you press the Shutter  
button, the picture is taken in the  
normal way. When taking a picture of  
smile shot, showing teethes or keeping  
the smiley face of your subject helps  
detecting the smile face of the subject.  
You can select the image size appropriate for your application.  
(Unit: pixel)  
Icon  
Size  
Still  
image  
mode  
4000X 3984X 3968X 3264X 2592X 2048X 1024X  
3000  
2656  
2232  
2448  
1944  
1536  
768  
Movie  
clip  
mode  
Icon  
Size  
Ê Blink Detection  
800X592  
640X480  
320X240  
If the eyes of the subject are closed  
when the shutter button is pressed,  
the camera takes 2 continuous shots  
and then the images are saved. The  
camera takes only one picture if the  
eyes of the subject are open when the  
Shutter button is pressed.  
Movie Size  
Photo Size  
Back  
Move  
Back  
Move  
[ STILL IMAGE mode ]  
[ MOVIE CLIP mode ]  
å Detecting the smiling face or the blinking eyes may not be  
available if any of the following situations occurs:  
- If the subject is wearing sunglasses.  
- When the subject is not facing directly to the camera.  
- If the environmental light is too bright or too dark to detect  
the face of the subject.  
å The higher the resolution, the lower the number of shots  
available because high resolution images require more memory.  
- When the camera is far from the subject. (Orange colored  
focusing mark)  
- If there is reflection of the light or the back light that are too  
bright.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Quality / Frame rate  
ACB  
This function is to adjust the contrast  
You can select the compression ratio appropriate for your application  
of the captured images. The higher the compression ratio, the lower  
the picture quality.  
automatically when taking photos in an en-  
vironment with big exposure difference i.e.  
backlight or contrast. This function adjusts  
the brightness automatically and allows the  
subject to be photographed clearly.  
ACB  
Mode  
Icon  
STILL IMAGE mode  
MOVIE CLIP mode  
Back  
Move  
Super  
Fine  
Sub menu  
Fine  
jpeg  
Normal 30 FPS 20 FPS 15 FPS  
- [ACB] Sub menus: [Off], [On].  
File  
Format  
jpeg  
jpeg  
avi  
avi  
avi  
Ä When using the [Program] mode, the ACB function will operate.  
Quality  
Frame Rate  
Back  
Back  
Move  
Move  
[ STILL IMAGE mode ]  
[ MOVIE CLIP mode ]  
å
å
This file format complies with the DCF (Design rule for Camera  
File system).  
JPEG (Joint Photographic Experts Group) :  
JPEG is the image compression standard developed by the  
Joint Photographic Experts Group. This type of compression  
is most commonly used for compressing photos and graphics  
because it can compress the files efficiently.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Metering  
Drive mode  
If you cannot obtain suitable exposure conditions, you can change  
the metering method to take brighter pictures.  
You can select single, continuous, motion capture, and AEB (Auto  
Exposure Bracketing).  
[Single] (  
[Continuous] (  
)
:
Take one picture only.  
[Multi] ( ) : Exposure will be calculated  
) : Images will be taken  
continuously until the  
shutter button is  
released.  
: This takes 5 shots  
per second, when  
based on an average of  
Metering  
Drive  
the available light in the  
image area. However, the  
calculation will be biased  
towards the centre of the  
image area. This is suitable  
for general use.  
[Motion Capture] (  
)
Back  
Move  
Back  
Move  
the shutter is pressed and held down. After  
completing the continuous shooting, images  
are saved and the images play back on the  
Rear LCD. The maximum number of shots is  
30 and the image size is fixed as VGA.  
Take three pictures in a series in different  
exposures: standard exposure (0.0EV),  
short exposure (-1/2EV) and over exposure  
(+1/2EV).  
[Spot] ( ) : Only the rectangular area in the centre of the LCD  
monitor will be metered for light. This is suitable  
when the subject in the centre is exposed correctly,  
regardless of the back lighting.  
[AEB] (  
)
:
[Center Weighted] (  
)
: Exposure will be calculated based on an average of  
the available light in the image area. However, the  
calculation will be biased towards the centre of the  
image area. This is suitable for taking a picture of  
small object like a flower or insects.  
å High resolution and picture quality increases file saving time,  
which increases stand-by time.  
å If the [Continuous], [Motion Capture], [AEB] sub menu is selected,  
the flash will be off automatically.  
å If less than 3 pictures are available in the memory, the AEB  
shooting is not available.  
Ä If the subject is not the centre of the focus area, do not use the  
spot metering as this may result in an exposure error. In this  
circumstance, it is better to use exposure compensation.  
å It is best to use a tripod for the AEB shooting as the time to save  
each image file is longer and blurring caused by camera shake  
may occur.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Frame Guide  
Auto Focus type  
Set [Frame Guide] mode when you want  
someone else to take a picture for you  
from the angle you choose.  
You can select your preferred Focus Area  
according to the shooting conditions.  
Frame Guide  
Focus Area  
Back  
Back  
Move  
Move  
Ŷ How to use the [Frame Guide] mode  
[Center AF] (  
[Multi AF] (  
) : The rectangular area in the center of the LCD  
monitor will be focused  
: This camera selects all of available AF point  
from the 9 AF points.  
1. Take a picture from the angle you  
choose.  
- A guide appears round the sides of the  
picture.  
)
Cancel Frame: OK  
Guide  
2. Then another person can take the picture  
by aligning the edge of the picture to be  
taken with the guide framing the sides of  
the window.  
[Center AF]  
[Multi AF]  
Cancel Frame: OK  
Ä When the camera focuses on the subject, the auto focus frame  
turns to green. When the camera doesn't focus on the subject,  
the auto focus frame turns to red.  
Cancel Frame: OK  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Ê Custom colour : You can change the  
R (Red), G (Green)  
Photo Style Selector  
You can add various effects to the image  
without using image editing software.  
and B (Blue) values  
of the image.  
Photo Style Selector  
Back  
Move  
- Up/Down button : Selects R, G, B  
Back  
Move  
- Left/Right button : Changes the values  
1. Select the desired Photo style selector by pressing the Left/Right  
button and press the OK button.  
Back  
Move  
2. Press the Shutter button to take an image.  
Style mode  
Normal  
Icon  
Description  
No style effect is applied.  
å
å
å
When picture style is set, face detection is not available.  
When Soft or Vivid in photo style is set, saturation is not available.  
When Negative in photo style is set, contrast is not available.  
Soft  
Soft style is applied.  
Vivid  
Forest  
Vivid style is applied.  
Forest style is applied.  
Retro  
Sepia style is applied.  
Cool  
Cool style is applied.  
Calm  
Calm style is applied.  
Classic  
Negative  
Custom RGB  
Black & white effect is applied.  
Negative effect is applied.  
Define an RGB tone to create your own photo style.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
Image Adjust  
Ê Contrast  
)
Ê Saturation  
You can change the saturation of the image.  
1. Select [Saturation] by pressing the  
Up/Down button.  
You can change the contrast of the image.  
Image Adjust  
1. Select [Contrast] by pressing the  
Up/Down button.  
Contrast  
2. Change the saturation by pressing  
the Left/Right button.  
Sharpness  
Saturation  
Image Adjust  
2. Change the contrast by pressing the  
Left/Right button.  
3. Press the Shutter button to take an  
image.  
Contrast  
Sharpness  
Saturation  
Back  
Move  
3. Press the Shutter button to take an  
image.  
Back  
Move  
å
When Soft or Vivid in photo style is set, saturation is not  
available.  
å
When Negative in photo style is set, contrast is not available.  
Ê Sharpness  
You can adjust the sharpness of the  
picture you are about to take.  
You cannot check the sharpness effect  
on the LCD monitor before you take a  
picture, because this function is applied  
only when the captured image is stored  
on the memory.  
Image Adjust  
Contrast  
Sharpness  
Saturation  
Back  
Move  
1. Select [Sharpness] by pressing the Up/Down button.  
2. Change the Sharpness by pressing the Left/Right button.  
3. Press the Shutter button to take an image.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
DIS  
Movie clip frame stabiliser  
Digital Image Stabilization (DIS)  
This function helps minimize camera shake  
when capturing a still image.  
This function helps stabilize images  
captured during movie recording. You can  
select this menu only in the Movie clip  
mode. If the memory card is not inserted,  
this function will not operate.  
DIS  
Stabiliser  
Back  
Back  
Move  
Move  
[Off] (  
[On] (  
) : Disables the DIS function when capturing a still image.  
) : Enables the DIS function when capturing a still image.  
[Off] (  
[On] (  
)
: Movie clip frame stabilizer function is disabled.  
: Minimises camera shake during movie recording.  
)
Ä The recording frame range becomes narrow when you select this  
menu.  
Ê Things to watch out for using the DIS function  
1. The digital zoom will not operate in the DIS function.  
2. If the lighting condition is brighter than fluorescent lighting condi-  
tions, the DIS will not activate.  
3. If the lighting condition is darker than in fluorescent lighting con-  
ditions, camera shake warning indicator ( Ã ) will display. For  
best results only take pictures in situations where the camera  
shake warning indicator ( Ã ) is not displayed.  
4. If the subject is moving, the captured image may be blurred.  
5. As the DIS uses the camera's digital signal processor, it may  
take a little longer for the camera to process and save the  
images.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Voice Recording  
Voice Memo  
You can add your voice-over to a stored  
still image. (Max. 10 sec.)  
A voice can be recorded for as long as the  
available recording time (Max. 10 hour)  
allows.  
Memo  
Record  
Back  
Move  
Back  
Move  
-
If the voice memo indicator is displayed  
on the LCD monitor, the setting is  
completed.  
Press the shutter button to record a voice.  
- Press the shutter button once and voice  
is recorded for as long as the available  
recording time (max:10 hour) allows. The  
recording time will be displayed on the  
LCD monitor. Voice will still be recorded  
if the shutter button is released.  
- Press the shutter button and take a  
picture. The picture is stored on the  
memory card.  
Record  
Exit  
[Voice recording mode]  
- If you wish to stop recording, press the  
shutter button again.  
- Voice memo will be recorded for ten  
seconds from the moment the picture  
is stored. In the middle of the sound  
recording, pressing the shutter button  
will stop the voice memo.  
- File type : *.wav  
Stop  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions (  
)
Ê Pausing while recording a voice  
Recording the movie clip without voice  
Using this function, you can record your  
favourite voice clips into a voice recording  
file without having to create multiple voice  
recording files.  
You can record the movie without voice.  
Off  
Select [Off] of [Voice] menu in the Movie  
clip mode. (  
) icon will appear on the  
Stop  
Record  
LCD monitor. Press the Shutter button  
and a movie will record for as long as the  
memory capacity allows without voice.  
[Voice recording mode]  
Back  
Move  
1. Press the OK button to pause recording.  
2. Press the OK button again to resume the recording.  
3. If you wish to stop recording, press the shutter button again.  
å
å
A distance of 25cm between you and the camera (microphone)  
is the best distance to record sound.  
If the camera power is turned off while the voice recording is  
paused, the voice recording is cancelled.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound menu  
In this mode, you can set up sound settings. You can use the setup  
menu in all camera modes, except Voice Recording mode.  
Shutter sound  
Volume  
:Medium  
You can select the shutter sound.  
- Shutter sound : [Off], [1]*, [2], [3]  
Ê The items indicated by * are default settings.  
Start Sound  
:Off  
Ä Menus are subject to change without prior notice.  
Shutter Sound  
Off  
Beep Sound  
AF Sound  
1
2
3
Self-Portrait  
(
)
Back  
Set  
Sound  
Volume  
You can select a volume of start up  
sound, shutter sound, beep sound and AF  
sound.  
Volume  
Off  
Low
Start Sound  
Medium  
Shutter Sound  
High  
Beep Sound  
AF Sound  
Beep Sound  
:On  
:On  
- [Volume] sub menu : [Off], [Low],  
[Medium]*, [High]  
Self-Portrait  
If you set sound to ON, a beep will sound when buttons are  
pressed, letting you know the camera operation status.  
Back  
Set  
Volume  
:Medium  
- [Beep Sound] sub menu : [Off], [1]*, [2], [3]  
Start Sound  
:Off  
Shutter Sound  
Off  
Beep Sound  
AF Sound  
1
2
3
Start up sound  
Self-Portrait  
You can select the sound that is activated  
whenever the camera is turned on.  
Volume  
:Medium  
Start Sound  
Off  
Back  
Set  
Shutter Sound  
1
2
3
Beep Sound  
AF Sound  
- Start up sound : [Off]*, [1], [2], [3]  
:On  
Self-Portrait  
Back  
Set  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
Setup menu  
Sound  
AF sound  
In this mode, you can set up basic settings. You can use the setup  
menu in all camera modes, except Voice Recording mode.  
If you set AF sound to on, AF sound will be activated when the  
Shutter button is pressed down half way so that you can be aware  
of the camera operation status.  
Ê The items indicated by * are default settings.  
Ä Menus are subject to change without prior notice.  
Volume  
:Medium  
- [AF sound] sub menu : [Off], [On]*  
Start Sound  
:Off  
:1  
Display (  
)
Shutter Sound  
Beep Sound  
AF Sound  
:1  
Off  
On  
Language  
Self-Portrait  
There is a choice of language that can be  
displayed on the LCD monitor. Even if the  
battery is removed and inserted again, the  
language setting will be preserved.  
Back  
Set  
Language  
English  
Function Description  
Start Image  
䚐ạ㛨  
Français  
Deutsch  
Display Brightness  
Quick View  
Self Portrait  
Español  
Italiano  
Power Save  
This occurs when it automatically detects the location of the  
subject’s face when taking a self-portrait.  
Back  
Set  
Volume  
:Medium  
- This feature can be set by using the [Off]  
and [On]* buttons.  
Start Sound  
:Off  
:1  
Shutter Sound  
Beep Sound  
AF Sound  
:1  
Function Description  
Off  
On  
You can select whether the function description can be displayed  
on the window in recording mode.  
Self-Portrait  
Back  
Set  
Language  
:English  
- Function Description sub menu  
[Off] : The function description  
function can’t be activated.  
[On]* : The name and description of the  
option is displayed.  
Function Description  
Start Image  
Off  
On  
Display Brightness  
Quick View  
:Auto  
:0.5sec  
:Off  
Power Save  
Back  
Set  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display (  
)
Start up image  
Quick view  
You can select the image that is first displayed on the LCD monitor  
whenever the camera is turned on.  
If you enable Quick View before capturing an image, you can view  
the image you just captured on the LCD monitor for the duration  
set in the [Quick View] setup. Quick view is possible only with still  
images.  
- Sub menus : [Off]*, [Logo], [User Image]  
Language  
ꢀ
Function Descriptio
Start Image  
- Use a saved image for the start-up  
image with the [Start Image] in the  
[Resize] menu in the play mode.  
- The start-up image will not be deleted by  
[Delete] or [Format] menu.  
Off  
Display Brightness  
Quick View  
- Sub menus  
Language  
:English  
[Off]  
: The quick view function can’t  
be activated.  
Power Save  
ꢁ
Function Description  
Start Image  
:On  
:Off  
Exit  
Back  
[0.5 sec]*, [1 sec], [3 sec]  
: The captured image is briefly  
Off  
Display Brightness  
Quick View  
- The User images will be deleted by  
[Reset] menu.  
0.5 sec  
1 sec  
Power Save  
displayed during the selected  
time.  
3 sec  
Set  
Back  
Display SAVE  
Display Bright  
You can adjust the LCD brightness.  
If you set the [Power Save] to On and the camera isn't operated  
during the specified time, the LCD monitor will be turned off  
automatically.  
Language  
:English  
- Sub menus : [Auto]*, [Dark],  
[Normal], [Bright]  
Function Description  
Start Image  
:On  
:Off  
Auto  
Display Brightness  
Quick View  
- Sub menus  
Dark  
[Off]* : The LCD monitor will not be turned off.  
Language  
:English  
Normal  
Power Save  
Bright  
Function Description  
Start Image  
:On  
:Off  
[On] : If the camera isn't operated  
during the specified time (about  
30 SEC.), the camera power will  
be idle (Camera status lamp:  
Blinking) automatically.  
Back  
Set  
Display Brightness  
Quick View  
:Auto  
:0.5sec  
Off  
On  
Power Save  
Back  
Set  
Ä You can’t set the [Power Save] menu of Playback Mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
( ” )  
Settings  
Formatting a memory  
Initialisation  
This is used for formatting the memory. If you run [Format] on the  
memory, all images, including the protected images, will be deleted.  
Be sure to download important images to your PC before formatting  
the memory.  
All camera menu and function settings will be restored to their  
default values. However, values for DATE / TIME, LANGUAGE,  
and VIDEO OUT will not be changed.  
- Sub menus  
- Sub menus  
[Yes] : A window for confirming the  
[Yes] : A window to confirm the  
Format  
Reset  
selection will be displayed.  
Yes  
Format  
Yes  
Date & Time  
No  
selection displays. Select the [Yes]  
Select the [Yes] menu and  
all settings will be restored  
to their defaults.  
Reset  
No  
Time Zone  
File No.  
:London  
:Series  
Date & Time  
:Off  
menu. A [Formatting] message  
appears and the memory will be  
formatted. If you run FORMAT in  
Play mode, a [Format is completed]  
message will appear.  
Time Zone  
File No.  
:London  
:Series  
Imprint  
:Off  
Auto Power Off  
:3 min  
Imprint  
:Off  
[No]* : Settings will not be restored to  
their defaults.  
Back  
Set  
Auto Power Off  
:3 min  
Back  
Set  
[No]* : The memory will not be formatted.  
Ê Be sure to run [Format] on the following types of memory card.  
- A new memory card, or an unformatted memory card  
- A memory card that has a file this camera can't recognise or one  
that has been taken from another camera.  
- Always format the memory card using this camera. If you insert a  
memory card that has been formatted using other cameras,  
memory card readers, or PCs, you will get a [Card Error]  
message.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ” )  
Settings  
File name  
Setting up the Date / Time / Date type  
You can change the date and time that will be displayed on the  
captured images and set up the date type. Setting [Time Zone]  
enables you to display the local date and time on the LCD monitor  
when travelling overseas.  
This function allows the user to select the file naming format.  
[Reset] : After using the reset function,  
Format  
Reset  
the next file name will be set  
Date & Time  
from 0001 even after formatting,  
Time Zone  
:Off  
:London  
Format  
-
Date type : [yyyy/mm/dd], [mm/dd/yyyy],  
[dd/mm/yyyy], [Off]*  
deleting all or inserting a new  
memory card.  
File No.  
Reset  
Reset  
Imprint  
Date & Time  
:Off  
Series  
Auto Power Off  
:3 min  
yyyy mm dd  
Tim
Back  
Set  
[Series]* : New files are named using  
2009  
File
/
01  
/
01  
13:00  
Set  
Off  
Imprint  
:Off  
numbers that follow the previous sequence, even when  
a new memory card is used, or after formatting, or after  
deleting all pictures.  
Auto Power Off  
:3 min  
Back  
- The first stored folder name is 100SSCAM, and the first file  
name is SDC10001.  
Time Zone  
- File names are assigned sequentially from SDC10001 Ã  
SDC10002 Ã ~ Ã SDC19999.  
Ê Available cities:  
London, Cape Verde, Mid-Atlantic,  
Buenos Aires, Newfoundland, Caracas,  
La Paz, NewYork, Miami, Chicago,  
Dallas, Denver, Phoenix, LA, San Fran-  
cisco, Alaska, Honolulu, Hawaii, Samoa,  
Midway, Wellington, Auckland, Okhotsk,  
Guam, Sydney, Darwin Adelaide, Seoul,  
Time Zone  
- The folder number is assigned sequentially from 100 to 999 as  
follows: 100SSCAM Ã 101SSCAM Ã ~ Ã 999SSCAM.  
- Maximum numbers of files in a folder are 9999.  
- The files used with the memory card conform to the DCF (Design  
rule for Camera File systems) format. If you change the image  
file name, the image may not play back.  
London  
[GMT +00:00] 2009/01/01 01:00 PM  
Back  
DST  
Tokyo, Beijing, Hong Kong, Bankok, Jakarta, Yangon, Almaty,  
Kathmandu, Mumbai, New Delhi, Tashkent, Kabul, Abu Dhabi,  
Teheran, Moscow, Athens, Helsinki, Rome, Paris, Berlin  
Ä DST : Daylight Saving Time  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ” )  
Settings  
Imprinting the recording date  
Auto power off  
There is an option to include DATE / TIME on still images.  
- Sub menus  
This function switches the camera off after a set amount of time in  
order to prevent unnecessary battery drainage.  
[Off]*  
: The DATE & TIME will not be  
imprinted on the image file.  
: Only the DATE will be  
Format  
- Sub menus  
Reset  
[Off]  
: The power off function will not  
operate.  
Format  
Date & Time  
:Off  
[Date]  
Reset  
Time Zone  
File No.  
:
Off  
Date  
Date & Time  
Off  
imprinted on the image file.  
[1 min], [3 min]*, [5 min], [10 min]  
: The power will turn off  
Time Zone  
File No.  
1 min  
Imprint  
[Date & Time] : The DATE & TIME will be  
Date & Time  
:
3 min
Auto Power Off  
5 min  
Imprint  
imprinted on the image file.  
Back  
Set  
automatically if not used for the  
period of time specified.  
10 min  
Auto Power Off  
Back  
Set  
Ä The Date & Time are imprinted at the bottom right side of the still  
image.  
Ä The imprint function is applied only to still images.  
Ä Depending on the manufacturer and print mode, the date printed  
on an image may not be printed correctly.  
-
After replacing the battery, the power off setting will be preserved.  
- Note that the automatic power off function will not operate if the  
camera is in the PC / Printer mode, slide show, playing back a  
voice recording and playing back a movie clip.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ” )  
Settings  
Selecting Video out type  
Auto Focus lamp  
You can turn on and off the Auto Focus lamp.  
The Movie output signal from the camera can be NTSC or PAL.  
Your choice of output will be governed by the type of device  
(monitor or TV, etc.) to which the camera is connected. PAL  
mode can support only BDGHI.  
- Sub menus  
[Off] : The AF lamp will not light up in  
low light conditions.  
AF Lamp  
Off  
On  
Video Out  
USB  
:Auto  
[On]* : The AF lamp will light up in low  
light conditions.  
Ê Connecting to an external monitor  
AF Lamp  
:On  
When the camera is connected to an  
external monitor, the image and menus  
on the LCD monitor will be visible on the  
external monitor and the LCD monitor of  
the camera.  
Back  
Set  
Video Out  
USB  
NTSC  
PAL  
Back  
Set  
Yellow - Video  
White - Sound  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ” )  
Settings  
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.  
- PAL : Australia, Austria, Belgium, China, Denmark, Finland,  
Germany, U.K., Holland, Italy, Kuwait, Malaysia, New  
Zealand, Singapore, Spain, Sweden, Switzerland,  
Thailand, Norway.  
- When using a TV as an external monitor, you will need to select  
the external or AV channel of the TV.  
- There will be a digital noise on the external monitor, but it is not a  
malfunction.  
- If the image is not in the centre of the screen, use the TV controls  
to centre it.  
- When the camera is connected to an external monitor, some parts  
of the image may not be displayed.  
- When the camera is connected to an external monitor, the menu  
will be visible on the external monitor and the menu functions are  
the same as those indicated on the LCD monitor.  
Setting the USB  
If the camera is set to connect automatically to a PC or a printer  
using a USB cable, you can manually set [Computer] or [Printer].  
-[USB] sub menus:  
[Auto]*  
: Automatically enables an  
external device connected  
with a USB cable.  
AF Lamp  
:On  
Video Out  
USB  
:NTSC  
Auto  
Computer  
Printer  
[Computer]: Sets computer connection  
mode if the connected external  
device cannot be recognized  
automatically.  
Back  
Set  
[Printer]  
: Sets printer connection mode if the connected  
external device cannot be recognized automatically.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting play mode  
Turn the camera on and select Play mode by pressing the play  
mode button ( Î ). The camera can now play back the images  
stored in the memory.  
If the memory card is inserted in the camera, all the camera  
functions apply only to the memory card.  
Playing back a movie clip  
1. Select the recorded movie clip that  
you want to play back by using the  
Left/Right button.  
2. Press the OK button to play back a  
movie clip file.  
If the memory card is not inserted in the camera, all the camera  
functions apply only to the internal memory.  
Play  
Capture  
- To pause a movie clip file while playing  
it back, press the OK button again.  
- Pressing the OK button again will  
cause the movie clip file to restart.  
Playing back a still image  
1. Select the PLAY mode by pressing  
the play mode button ( Î ).  
-
To rewind the movie clip while it is  
playing, press the Left button. To  
fast forward the movie clip, press  
the Right button.  
- To stop playback of the movie clip, press the OK button, and  
then press the Left or Right button.  
2. The last image stored on the  
memory is displayed on the  
LCD monitor.  
3. Select an image that you want to  
view by pressing the Left/ Right  
button.  
Ä Press and hold the Left or Right  
button to play back the images  
quickly.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting play mode  
Playing back a recorded voice  
Movie clip capture function  
You can capture still images from the movie clip.  
1. Select the recorded voice that you want to  
play back by using the Left/Right button.  
2. Press the OK button to play back a  
recorded voice file.  
- To pause a recorded voice file, while  
playing it back, press the OK button  
again.  
Ê How to capture the movie clip  
1. Press the OK button while playing the  
movie clip. Then press the Down button.  
2. The paused movie clip is saved in a  
new file name.  
Play  
Play  
Capture  
- To resume playback of the voice file, press the OK button.  
- To rewind the voice file while it is playing, press the Left button.  
To fast forward the voice file, press the Right button.  
[Paused]  
Ä The captured movie clip file is the  
same size as the original movie clip  
(800x592, 640x480, 320x240).  
- To stop playback of the voice memo, press the Down button.  
Ä
When you press the down button at  
the beginning of the movie clip, the  
first frame of the movie clip will be  
saved as a still image.  
[Press the down button]  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting play mode  
LCD monitor Indicator  
The LCD monitor displays shooting information about the displayed image.  
Playing back a voice memo  
1. Select a still image that has the voice  
memo.  
2. Press the OK button to play back the  
voice memo.  
- To pause the voice memo, while  
playing it back, press the OK button  
again.  
Play  
- To resume playback of the voice memo,  
press the OK button.  
Pause  
No.  
1
Description  
Playback mode  
Voice Memo  
Icon  
Page  
p.53  
p.70  
Î
2
3
DPOF  
p.71  
4
5
Protect  
p.70  
p.49  
Folder name & File name  
100-0010  
6
Memory card indicator  
-
7
8
Battery  
ISO  
p.14  
p.34  
-
80~3200  
F3.0 ~ F5.6  
9
Aperture value  
Shutter speed  
Flash  
10  
11  
12  
13  
8 ~ 1/1,500  
-
On/Off  
p.27  
p.36  
p.49  
Image size  
Recording date  
4000X3000 ~ 320X240  
2009/01/01  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
º
í
Thumbnail (  
) / Enlargement (  
) Lever  
Using the camera buttons to set the camera  
In Play mode, you can use the buttons on the camera to conveniently  
set up the Play mode functions.  
Smart Album  
You can view multiple pictures, enlarge a selected picture, and crop  
and save a selected area of an image.  
Play mode button  
1. Turn the Thumbnail lever to the left  
when one picture is displayed to enter  
the Smart Album screen.  
2. Press the Left/Right button to move to  
a desired image.  
Ê If you have turned on the camera by  
pressing the POWER button, you can  
press the Play mode button once to  
switch to Play mode and press it again  
to switch to Recording mode.  
3. Turn the Digital Zoom lever to the right  
to move to the normal display screen.  
Ê You can turn the power on with the Play  
mode button. The camera is turned on in  
play mode. Press the Play mode button  
again to turn off the camera.  
Turn the Thumbnail  
(º) lever to the left.  
Ê Manner mode: To select the Manner mode, press the Play mode  
button for more than 3 seconds. In the Manner  
mode, Operating sound, Effect sound, Start-up  
sound and Shutter sound will not be generated. To  
cancel the Manner mode, turn on the camera by  
pressing the POWER button.  
Turn the Digital Zoom  
(í) lever to the right.  
11  
12  
1
3
5
Filter  
2009/01/01  
[Highlighted image]  
[Smart Album 3-Thumbnail Window]  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
º
í
Thumbnail (  
) / Enlargement (  
) Lever  
Ŷ Searching or Deleting Files  
Ŷ Smart Album Filter  
1. Turn the Thumbnail lever to the left on  
the Smart Album screen.  
1. Press the MENU button in Smart Album  
mode.  
Type  
2. Each time you turn the Thumbnail lever to  
the left, files in the relevant category are  
displayed on the Smart Album screen.  
2. Selecting the desired category enables to  
categorize and search the files by using  
the Up/Down button.  
Date  
Colour  
Week  
11  
12  
1
3
5
3. Select the file by pressing the Up/Down/ Left/Right buttons.  
4. Press the Delete ( ) button to delete the selected file.  
Back  
Set  
Õ
Ŷ Details of Each Category  
11  
12  
1
3
5
11  
12  
1
3
5
11  
12  
1
3
5
Category  
Type  
Description  
File Format  
Filter  
2009/01/01  
Filter  
2009/01/01  
Filter  
2009/01/01  
[3-Thumbnail Window]  
[9-Thumbnail Window]  
[20-Thumbnail Window]  
Categorized depending on the file type  
(e.g., picture, video, or voice)  
Categorized depending on the sequence of  
recorded dates.  
Ɣ When Smart Album feature runs or a category is selected, it  
may take few seconds depends on recorded data volume.  
However, it is not a malfunction please wait until Smart Album  
screen appears.  
Date  
Colour  
Week  
Pictures,  
Videos,  
Voice  
Categorized depending on the main color.  
Categorized depending on the sequence of  
recorded weeks.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
º
í
Thumbnail (  
) / Enlargement (  
) Lever  
Ê The maximum enlargement rate in proportion to the image size  
Ê Image enlargement  
1. Select the picture you want to  
enlarge and move the Digital Zoom  
lever to the right. Then the selected  
picture will be digitally enlarged.  
2. Different parts of the image can be  
viewed by pressing the 5 function  
button.  
Image size  
Maximum  
enlargement  
rate  
X10.2 X10.2 X9.3 X10.2 X8.1  
X6.4  
X3.2  
3. Move the Thumbnail lever to the  
left to return the enlarged picture to  
its original size.  
- You can tell whether the image  
displayed is an enlarged view by  
checking the image enlargement  
indicator shown at the top left of the LCD monitor. (If the image  
is not an enlarged view,  
the indicator will not be displayed.) You can also check the  
area of enlargement.  
- Movie clips and WAV files can’t be enlarged.  
- If an image is enlarged, a loss of quality may occur.  
Ê Trimming : You can extract part of the image that you want and  
save it separately.  
1. Select an image that you want to  
enlarge and press the enlargement  
button. Press the OK button and a  
Trim  
Trimming?  
Yes  
No  
message will be displayed.  
2. Select a desired sub menu by  
pressing the Up / Down button  
and press the OK button.  
Confirm  
- [Yes] : The trimmed image will be saved as a new file name,  
and appear on the LCD monitor.  
- [No] : The trimming menu will disappear.  
Ä If there is not enough memory space to save the trimmed  
image, the image can’t be trimmed.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Info (DISP) / Up button  
Play & Pause / OK button  
When the menu is displayed on the LCD monitor, the UP button  
operates as a direction button.  
When the menu is not displayed on the LCD monitor, pressing the  
Info button will display image information on the LCD monitor.  
In Play mode, the play & pause/ OK button works as follows:  
-
When the menu is displayed on the LCD monitor, the OK button  
is used for confirming data that is changed by using the 5 function  
button.  
- If a still image with a voice memo, a voice file, or a movie clip is  
playing  
·In Stop mode  
: Plays a still image with a voice memo, a  
voice file, or a movie clip.  
Info (DISP) button  
·During playback : Temporarily stops playback.  
·In Pause mode : Resumes playback  
Info (DISP) button  
Info (DISP) button  
Play  
Pause  
Stop  
Play  
Stop  
[ Voice recording is stopped ]  
[ Voice recording is playing ]  
[ Voice recording is paused ]  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( Õ )  
Delete  
button  
Left / Right / Down / MENU button  
LEFT / RIGHT / DOWN / MENU buttons activate the following.  
This deletes images stored on the memory card.  
- LEFT button : While the menu is showing, the LEFT button  
operates as a direction button. While the menu is  
not showing, press the LEFT button to select the  
previous image.  
1. Select an image that you want to delete by pressing the  
Left / Right button and press the DELETE ( Õ ) button.  
- RIGHT button : While the menu is showing, the RIGHT button  
operates as a direction button. While the menu  
is not showing, press the RIGHT button to select  
the next image.  
Delete File?  
Delete File?  
Yes  
No  
Multiple Delete  
Yes  
No  
Multiple Delete  
11  
12  
1
3
5
Set  
Set  
- DOWN button : While the menu is showing, the Down button  
operates as a direction button.  
[Single Image]  
[Thumbnail Image]  
- MENU button  
:
When you press the MENU button, the play mode  
menu will be displayed on the LCD monitor. Pressing  
it again will return the LCD to the initial display.  
2. To add images to delete, select the [Multiple Delete] menu.  
- Left/Right button : Selects images  
- OK button  
Delete ( Õ ) button : deletes the  
selected images.  
:
checks for deletion  
-
Prev  
Select  
Next  
Delete  
3. Select the submenu values by pressing the Up / Down button  
and then press the OK button.  
- If [Yes] is selected : deletes the selected images.  
- If [No] is selected : cancels "Delete Image".  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the play back function using the LCD monitor  
PLAY mode functions can be changed by using the LCD monitor.  
In the PLAY mode, pressing the MENU button displays the menu  
Secondary  
Menu  
Menu Tab Main Menu  
Sub Menu  
Page  
on the LCD monitor. The menus you can set up in Play mode are  
as follows. To capture an image after setting up the play menu,  
press the PLAY mode button or shutter button.  
Off  
Calm  
Rural  
Lively  
Relax  
-
Sweet  
Vivid  
-
Effect  
p.68  
p.69  
p.69  
-
Menu Tab Main Menu  
Resize  
Sub Menu  
2592X1944  
Page  
p.63  
Shine  
-
2048X1536  
2592X1728  
2592X1458  
Start Image  
Left 90˚  
Horizontal  
-
Multi Slide  
Show  
1024X768  
1800X1200  
1920X1080  
Right 90˚  
180˚  
Interval  
Music  
1, 3, 5, 10 sec  
-
(
)
ꢀ
Off  
Mist  
Fall  
-
Muse  
Dawn  
Drops  
-
Party  
Trip  
-
Rotate  
p.64  
p.64  
-
Vertical  
Edit  
Select  
-
Normal  
Soft  
Delete  
Protect  
p.69  
p.70  
p.70  
(
)
Vivid  
Forest  
All  
Select  
All  
Yes / No  
Photo Style  
Selector  
Retro  
Cool  
-
Calm  
Classic  
Unlock / Lock  
Negative  
ACB  
Custom  
Red-eye Fix  
Brightness  
Saturation  
-
Off  
-
-
Voice memo  
File  
Options  
On  
Face Retouch  
Contrast  
Add Noise  
Image Adjust  
p.65  
Select / All /  
Reset  
(
)
Standard  
Index  
p.71  
~
p.72  
DPOF  
Yes / No  
View  
Single, 3, 9, 20  
p.67  
p.67  
p.68  
(
)
Select / All /  
Reset  
Size  
Multi Slide  
Show  
Start  
Play / Repeat  
All  
-
Date  
-
-
-
Yes  
No  
Copy To Card  
p.73  
Images  
(
)
ꢀ
Select  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the play back function using the LCD monitor  
This menu is available while the camera is connected to a PictBridge  
Menu Tab Main Menu  
Sub Menu  
Auto  
Secondary Menu Page  
supporting printer (direct connection to the camera, sold separately)  
with a USB cable.  
-
-
-
-
-
-
-
Plain  
Photo  
FastPhoto  
Auto  
Menu Tab Main Menu  
Images  
Sub Menu  
Secondary Menu Page  
Type  
One Photo  
-
p.81  
All Photos  
-
Auto  
-
-
-
-
-
-
-
-
Draft  
Normal  
Fine  
Quality  
Date  
PostCard  
p.81  
Card  
4X6  
L
-
❹
Auto  
-
-
-
-
-
-
Size  
Off  
2L  
On  
Letter  
A4  
A3  
Auto  
Full  
1
Auto  
File Name  
Reset  
Off  
❹
-
On  
p.81  
-
Yes  
No  
-
-
-
-
-
-
-
-
-
p.82  
-
Ä
Menus are subject to change without prior notice.  
2
Layout  
4
8
9
16  
Index  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit (  
)
- A large sized image can be resized to a smaller sized image,  
but not vice versa.  
- Only JPEG images can be resized. Movie clip (AVI), Voice  
recording (WAV) files can’t be resized.  
Resize  
Change the resolution (size) of pictures taken. Select [Start image]  
to save an image to be the start-up image.  
- You can change the resolution of only those files compressed in  
the JPEG 4:2:2 format.  
- The resized image will have a new file name. The [Start  
Image] image is stored not on the memory card but on the  
internal memory.  
- If a new user image is saved, one of the two user images will be  
deleted in order.  
- If the memory capacity is insufficient to store the resized image,  
a [Memory Full] message will appear on the LCD monitor and  
the resized image can't be stored.  
1. Press the play mode button and  
press the MENU button.  
2. Click the Up/Down button from the  
Edit menu to select [Resize] (  
menu tab and press the OK button.  
3. Select a desired sub menu by  
pressing the Left / Right button and  
press the OK button.  
Resize  
)
Back  
Move  
Ê Image Resize Types  
( o : Selectable)  
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit (  
)
Rotating an image  
Photo Style Selector  
It is possible to add various effects to your images by using this function.  
You can rotate the stored images by various degrees.  
1. Press the play mode button and press  
the MENU button.  
2. Click the Up/Down button from the Edit  
1. Press the play mode button and  
press the MENU button.  
2. Click the Up/Down button from the  
Rotate  
Photo Style Selector  
menu to select [Rotate] ( ò ) menu tab  
and press the OK button.  
3. Select a desired sub menu by pressing  
the Left / Right button and press the  
OK button.  
Edit menu to select [Photo Style  
Selector ] (  
) menu tab and press  
the OK button.  
Back  
Move  
Back  
Move  
3. Select a desired sub menu by pressing  
the Left / Right button and press the  
OK button.  
Right 90˚  
Left 90˚  
180˚  
Style mode  
Normal  
Icon  
Description  
No style effect is applied.  
Soft  
Soft style is applied.  
Back  
Move  
Back  
Move  
Back  
Move  
[
: Right 90˚]  
[
:
:
Left 90˚]  
ô
ó
[
:
180˚]  
õ
Vivid  
Forest  
Vivid style is applied.  
: Rotate picture in a  
Rotate picture in a  
: Rotate picture 180 degrees  
clock-wise direction  
counter-clock-wise direction  
Forest style is applied.  
Sepia style is applied.  
Cool style is applied.  
Calm style is applied.  
Black & white effect is applied.  
Negative effect is applied.  
Retro  
Horizontal  
Vertical  
Cool  
Calm  
Back  
Move  
Back  
Move  
Classic  
Negative  
Custom RGB  
[
:
Vertical]  
[
:
Horizontal]  
®
: Rotate picture horizontally  
: Rotate picture vertically  
Define an RGB tone to create your own photo style.  
If you display the rotated image on the LCD monitor, empty  
spaces may appear to the left and right of the image.  
4. The changed image is saved as a new file name.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit (  
)
Ê Red eye Removal  
Ê Custom colour  
Red eye effect can be removed from the captured image.  
You can change the R (Red), G (Green)  
and B (Blue) values of the image.  
1. Select (  
) by pressing the Left/Right  
!
button and press the OK button.  
2. The [Making New Image] message is  
displayed and the image is saved as a  
new file name.  
- OK button : Select / setup the Custom  
Colour  
- Up / Down button : Selects R, G, B  
- Left / Right button : Change the values  
Back  
Move  
Red-eye Fix  
Back  
Move  
Back  
Move  
Image Adjust  
Ê Face Retouch  
You can make the skin in an image appear clear and beautiful.  
1. Press the play back button and press the MENU button.  
2. Click the Up/Down button from the Edit menu to select  
1. Select ( ) by pressing the  
[Image Adjust] (  
) menu tab and press the OK button.  
Left/Right button and press the OK  
button. Then a bar for selecting the  
face retouch will be displayed.  
2. Change the face retouch by pressing the  
Left/Right button.  
Ê ACB  
Face Retouch  
You can automatically adjust the brightness of the dark area,  
caused by under exposure to the light source.  
Back  
Move  
3. Press the OK button and the image will  
be saved as a new file name.  
1. Select (  
) by pressing the Left/  
Right button and press the OK button.  
2. The [Making New Image] message is  
displayed and the image is saved as a  
new file name.  
ACB  
Back  
Move  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Edit (  
)
Ê Brightness control  
Ê Saturation control  
You can change the brightness of the image.  
You can change the saturation of the image.  
1. Select (  
) by pressing the Left/Right  
1. Select (  
) by pressing the  
button and press the OK button. Then  
a bar for selecting the saturation will be  
displayed.  
2. Change the saturation by pressing the  
Left/Right button.  
Left/Right button and press the OK  
button. Then a bar for selecting the  
brightness will be displayed.  
2. Change the brightness by pressing the  
Left/Right button.  
Saturation  
Back  
Brightness  
Back  
Move  
Move  
3. Press the OK button and the image will be  
saved as a new file name.  
3. Press the OK button and the image will  
be saved as a new file name.  
Ê Noise effect  
Ê Contrast control  
You can add noise to an image to add a more classic feel to  
your photo.  
You can change the contrast of the image.  
1. Select (  
y
) by pressing the Left/Right  
1. Select (  
) by pressing the Left/  
button and press the OK button. Then  
a bar for selecting the contrast will be  
displayed.  
2. Change the contrast by pressing the  
Left/Right button.  
Right button and press the OK button.  
2. The [Making New Image] message is  
displayed and the image is saved as a  
new file name.  
Contrast  
Back  
Add Noise  
Back  
Move  
Move  
3. Press the OK button and the image will be  
saved as a new file name.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ꢀ )  
(
)
Starting the Multi Slide Show  
View  
Images can be displayed continuously at pre-set intervals.  
You can view the Multi Slide Show by connecting the camera to an  
external monitor.  
You can view the thumbnails and easily categorize or search a large  
amount of content such as pictures and videos.  
1. Press the play mode button and press the menu button.  
2. Press the Up / Down button and select the [Multi Slide Show]  
menu tab and press the OK button.  
1. Press the MENU button in playback  
mode.  
2. Press the Up/Down button to select  
Single  
3
9
20  
the desired menu.  
3. Press the OK button and selected  
thumbnail screen will appear.  
Start the Multi Slide Show  
Exit  
Back  
The Multi Slide Show can start only in the [Start] menu.  
1. Use the Up / Down buttons to select the [Start] menu and press  
the Right button.  
Start  
2. Select a desired sub menu by pressing  
the Up / Down button.  
Play  
Images  
Effect  
Repeat  
:Off  
[Play] : The Multi Slide Show is  
closed after one cycle.  
Interval  
Music  
:1 sec  
:Off  
[Repeat] : The Slide show is repeated  
until cancelled.  
Back  
Set  
3. Press the OK button and the slideshow will be started.  
- To pause the slide shown while playing it back, press the OK  
button again.  
- Pressing the OK button again will cause the Multi Slide Show  
restart.  
- To stop playback of the Multi Slide Show, press the OK button,  
and then press the Left or Right button.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
( ꢀ )  
Starting the Multi Slide Show  
Selecting Images  
Configure Multi Slide show effects  
Unique screen effects can be used for the Multi Slide Show.  
You can select image to view  
1. Select the [Effect] sub menu by press-  
ing the UP / DOWN button and press  
the RIGHT button.  
2. Use the Up / Down button to select  
the type of effect.  
1. Use the Up / Down buttons to select the  
[Images] menu and press the Right button.  
Start  
Start  
Off  
Images  
Effect  
Images  
Effect  
Calm  
Sweet  
All  
Date  
Interval  
Music  
Rural  
2. Select a desired sub menu by pressing  
the Up / Down button.  
Interval  
Music  
Select  
Vivid  
:Off  
Lively  
[All]  
: All images saved in the  
Memory are played back.  
3. Press the OK button to confirm the  
setting.  
Back  
Set  
Back  
Set  
Press the OK button to save the configuration.  
[Date] : Images taken in a specified date are played back.  
Press the OK button to save the configuration.  
[Select] : Play only the selected images. The selected image  
can be saved as [Select1], [Select2] and [Select3].  
If you save the selected image with the [New Select]  
command, it will be saved as [Select1]. But when a  
new image is saved again using [New Select], the  
former image which had been saved as [Select1] will  
be saved as [Select2] automatically.You can change  
and cancel the images which were saved as [Select1],  
[Select2] and [Select3]. Press the (  
the configuration.  
Õ
) button to save  
3. Select [Play] or [Repeat] in the [Start] menu to start the multi  
slide show.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
( ꢀ )  
File Options  
Starting the Multi Slide Show  
Setting play interval  
1. Press the play mode button and press the menu button.  
2. Press the Up / Down button and select the [File Options] menu  
tab and press the OK button.  
Set the Multi Slide Show play interval.  
1. Select the [Interval] sub menu by  
pressing the UP / DOWN button and  
press the RIGHT button.  
2. Use the Up / Down buttons to select  
the desired interval.  
Start  
Images  
Effect  
:All  
Deleting images  
:Off  
1 sec  
Interval  
Music  
This deletes images stored on the memory.  
3 sec  
sec  
5
10 sec  
1. Press the Up / Down button and select  
the [Delete] menu tab. And then press  
the Right button.  
Delete  
Select  
3. Press the OK button to save the  
configuration.  
Back  
Set  
Protect  
All  
Voice memo  
:Off  
DPOF  
2. Select a desired sub menu by pressing the  
UP / DOWN button and press the OK button.  
[Select] : Selection window for an image  
to delete is displayed.  
Copy To Card  
å
å
The loading time depends on the image size and quality.  
While the Multi Slide Show is playing, only the first frame  
of a MOVIE file is displayed.  
Back  
Set  
å
å
While the Multi Slide Show is playing, the voice recording file  
will not display.  
The interval menu functions in the [Off] menu only.  
- Up/ Down/ Left/ Right : Select an image  
- OK button : Select the image for  
deletion. ( Ë mark)  
- Delete Button : Press the Delete button to  
display the confirmation  
11  
12  
1
3
5
Setting Background Music  
Set the Multi Slide Show music.  
Select  
Delete  
message. Select the [Yes]  
menu and press the OK  
button to delete marked  
1. Select the [Music] sub menu by pressing  
the UP / DOWN button and press the  
RIGHT button.  
2. Use the Up / Down buttons to select the  
desired Music.  
images.  
Start  
Delete All File(s)?  
Off  
Images  
Effect  
Yes  
No  
[All] : Displays confirmation window.  
Select the [Yes] menu and press the  
OK button to delete all unprotected  
images. If there aren’t protected  
Mist  
Muse  
Fall  
Interval  
Music  
Dawn  
Party  
Set  
3. Press the OK button to save the  
configuration.  
images, all the images are deleted and a [No Image File]  
message will appear.  
Back  
Set  
3. After deletion, the screen will be changed to the play mode screen.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
File Options  
[All] : Protect / release all saved images  
- If you protect an image, the protect  
icon will be displayed on the LCD  
monitor. (An unprotected image has  
no indicator)  
- An image in LOCK mode will be  
protected from the delete function  
or [Delete] functions, but will NOT be  
protected from the [Format] function.  
å Of all the files stored in the memory card, the unprotected files  
in the DCIM subfolder will be deleted. Remember that this  
will permanently delete unprotected images. Important shots  
should be stored on a computer before deletion takes place.  
The startup image is stored in the camera's internal memory  
(i.e., not on the memory card) and it will not be deleted even if  
you delete all files on the memory card.  
Protect All?  
Lock  
Unlock  
Set  
Protecting images  
This is used to protect specific shots from being accidentally erased (Lock).  
It also unprotects images that have been previously protected (Unlock).  
Voice memo  
1. Press the Up / Down button and select  
the [Protect] menu tab. And then press  
the Right button.  
Delete  
You can add your voice to a stored still image.  
Protect  
Select  
Voice memo  
All  
Delete  
Protect  
DPOF  
Copy To Card  
2. Select a desired sub menu by pressing the  
UP / DOWN button and press the OK button.  
[Select ] : Selection window for an  
image to be protected /  
Voice memo  
:
Off  
On  
DPOF  
Copy To Card  
Back  
Set  
Start  
Stop  
Back  
Set  
released is displayed.  
[Voice memo menu]  
[Ready for recording]  
[Voice is recording]  
- Up / Down / Left / Right : Select an image  
- OK button : Protect / release the  
image  
- Delete button : Your changes will be  
saved and the menu  
- Press the shutter button to record up to 10 seconds of voice into  
a stored still image.  
11  
12  
1
3
5
Select  
Set  
- To stop the recording, press the shutter button.  
will disappear.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
File Options  
DPOF  
Ê Standard  
This function allows you to embed printing quantity information on  
a stored image.  
Ê
DPOF(Digital Print Order Format) allows you to embed printing  
information on your memory card’s MISC folder. Select the  
pictures to be printed and how many prints to make.  
1. Press the Up / Down button and select  
the [DPOF] menu tab. And then press  
the Right button.  
Delete  
Protect  
Select Image  
Ê
The DPOF indicator will display on the LCD monitor when an image  
that has DPOF information plays back. Images can then be printed  
on DPOF printers, or at an increasing number of photo labs.  
Vo
DP
ff  
Select  
All  
ard  
Co
2. Press the Right button again and  
[Standard] sub menu will display.  
Reset  
Size  
Ê This function is not available for Movie clips and Voice recording files.  
Back  
Set  
3. Select a desired sub menu by pressing  
the Up / Down button and press the OK  
button.  
[Select] : Selection window for an  
image to print is displayed.  
- Up / Down / Left / Right : Select an  
image to print.  
Ê When the wide angle image is printed as a wide angle print,  
8% of the left and right side of the image may not be printed.  
Check that your printer can support the wide angle image when  
you print the image. When you print the image at a photo lab,  
request that the image is printed as a wide angle image. (Some  
photo labs may not support the wide angle size print.)  
11  
12  
1
3
5
Quantity  
Set  
- Zoom W/T Lever : Select the number of  
prints.  
[All] : Configure number of prints for all  
pictures except movie and voice  
files.  
01  
- Up / Down button : Select a number of  
prints  
Quantity  
Set  
[Reset] : Cancel the print setup.  
4. Press the OK button to confirm the setting. If an image carries  
DPOF instructions, the DPOF indicator ( ) will show.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
File Options  
Ê Index  
Ê Print size  
Images (except for movie clips and voice file) are printed as index  
type.  
You can specify the print size when printing images stored on the  
memory card. The [Size] menu is available only for DPOF 1.1  
compatible printers.  
1. Press the Up / Down button and select  
Delete  
the [DPOF] menu tab. And then press  
the Right button.  
Protect  
1. Press the Up / Down button and select  
the [DPOF] menu tab. And then press  
the Right button.  
Delete  
Setting Index?  
Protect  
Yes  
No  
Select Image  
d  
V
D
Off  
2. Select the [Index] menu and press  
the Right button again. Sub menu will  
display.  
Select  
All  
dard  
x  
Size  
C
2. Select the [Size] menu and press the  
Right button again. Sub menu will  
display.  
Reset  
Size  
Back  
Set  
Back  
Set  
3. Select a desired sub menu by pressing the UP / DOWN button.  
If [Yes] is selected : The image will be printed in index format.  
If [No] is selected : Cancel the index print setting.  
3. Select a desired sub menu by pressing  
the UP / DOWN button and press the  
OK button.  
[Select] : Selection window to change  
the printed size of the image  
is displayed.  
4. Press the OK button to confirm the setting.  
11  
12  
1
3
5
Size  
Set  
- Up / Down / Left / Right : Select an image.  
- Zoom W/T Lever : Change the print size.  
- Delete button : Your changes will be  
saved and the menu  
3X5  
will disappear.  
[All] : Change print size of all saved  
images.  
Size  
Set  
- Up / Down button : Select a print size  
- OK button : Confirm the changed setting.  
[Reset] : Cancel all of the print size settings.  
Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10  
å
Depending on the manufacturer and print model, cancelling the  
printing may take a little longer for the printer to process.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(
)
File Options  
Copy To Card  
å
å
If there is not enough space available in the memory card to  
copy saved images in the internal memory (About 31MB), the  
[Copy To Card] command will copy only some of the images  
and display [Memory Full] message. Then the system will  
return to the playback mode. Please be sure to delete any  
unnecessary files to free up space before inserting the memory  
card into the camera.  
When you move the images that are stored in the internal  
memory by doing [Copy To Card] to the card, the next number  
of file names will be created in the card to avoid duplication of  
the file name.  
- When the [Reset] of the [File No.] setup menu is set : The  
copied file names start from after the last stored file name.  
- When the [Series] of the [File No.] setup menu is set : The cop-  
ied file names start from after the last captured file name. After  
completing [Copy To Card], the last stored image of the last  
copied folder is displayed on the LCD monitor.  
This enables you to copy image files, movie clips and voice recording  
files to the memory card.  
1. Select the [Copy To Card] menu tab by  
pressing the Up / Down button. And then  
press the Right button.  
Delete  
Protect  
Voice memo  
:Off  
DPOF  
Copy To Card  
2. Select a desired sub menu by pressing  
the UP/ DOWN button and press the OK  
button.  
Yes  
No  
Back  
Set  
- [Yes] : All images, movie clips and voice  
recording files saved in the internal memory are copied  
to the memory card after the [Copying] message is  
displayed. After copying has been completed, the screen  
will return to play mode.  
- [No] : Cancels "Copy to Card".  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart mode  
Smart mode display  
Ŷ Smart mode  
Ŷ The LCD monitor displays information about the current Smart mode  
setting.  
Smart mode allows users to take a photo simply, without setting any of  
the more complex functions available. Even beginners can easily learn  
how to operate it.  
[Smart Auto mode]  
[Smart Movie Clip mode]  
Ŷ You can use the Smart button at the  
top of the camera to start Smart mode.  
[Image & Full Status]  
Ä When you press the Smart button, it  
will turn blue.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart mode display  
Starting Smart mode  
Selecting modes  
No.  
1
Description  
Icons  
Page  
p.75  
p.24  
Ê Mode selection using the Smart button  
Recording mode  
Optical Zoom bar  
You can use the Smart button at the top of your camera to select the  
correct smart mode.  
2
Number of available  
shots remaining  
00001  
3
p.16  
Remaining time  
00:00:00  
Memory card icon /  
Internal memory icon  
4
-
5
6
Battery  
Flash  
p.14  
p.27  
p.29  
p.36  
p.37  
p.49  
p.39  
[Smart Auto mode]  
[Program mode]  
7
Self-timer  
8
Image Size  
Frame rate  
Date / Time  
Auto Focus Frame  
9
10  
11  
2009/01/01 01:00 PM  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting Smart mode  
Each scene is recognized in the following conditions;  
How to use Smart Auto mode (  
)
Ê
The camera automatically chooses the appropriate camera settings based  
on a detected type of scene. It will be helpful if you are not familiar with the  
camera settings for various scenes.  
[Landscape]  
[White]  
(
(
(
(
)
)
)
)
: When shooting outdoor scenes  
When shooting in a very bright environment  
:
[Nights]  
: When shooting the nighttime scenes  
1. Use the Smart button to select Smart Auto  
mode.  
2. The camera selects a scene automatically.  
An appropriate mode icon will appear at the  
top left of the screen.  
[Night Portrait]  
: When shooting people in a dark out-  
door place  
[Backlight]  
(
)
: When shooting a backlit scenery  
without a portrait  
3. Press the Shutter button to capture an  
image.  
[Backlight Portrait]  
[Portrait]  
(
(
(
(
(
)
)
)
)
)
: When shooting a backlit portrait  
: When shooting a portrait  
å If the camera does not recognize a proper scene mode, the  
default settings will be used.  
[Macro]  
: When shooting close-ups  
å Even if there is a face detected, the camera may not select a  
portrait mode depending on the subject’s position or lighting.  
å The camera may not select the correct scene depending on  
shooting environments, such as camera shake, lighting, and  
distance to the subject.  
[Macro Text]  
[Tripod]  
: When shooting texts in a close focus  
: When shooting a subject without any  
movement on the tripod  
å The [Night] mode recognizes scenes only when the flash is set  
to off. The camera operates the [Tripod] mode after checking  
the shooting condition on the tripod for a certain time.  
å Despite using a tripod, the camera may not select a tripod  
mode depending on the subject’s movement.  
[Action]  
(
)
: When shooting a subject making  
frequent movements  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting Smart mode  
Setting up the Smart menu  
Ŷ Smart mode allows users to take a photo simply, without setting any  
of the more complex functions available. Even beginners can easily  
learn how to operate it.  
How to use Smart Movie Clip mode (  
)
Ê
This mode allows users to record a movie clip simply, without setting  
any of the more complex functions available.  
- Pressing the Menu button will display a menu screen for each Smart  
mode. Pressing it again will return to the previous screen.  
1. Use the Smart button to select Smart  
Movie Clip mode.  
2. Point the camera towards the subject and  
compose the image by using the LCD  
monitor.  
Photo Size  
Flash  
:
:
3. Press the shutter button once and movie  
clips are recorded for as long as the avail-  
able recording time allows. Movie clips  
will still be recorded if the shutter button  
is released. If you wish to stop recording,  
press the shutter button again.  
Timer  
: Off  
[Pressing the MENU  
button]  
Volume  
:
Medium  
Exit  
Change  
[Menu off (Smart Auto)]  
[Menu on (Smart Auto)]  
-
Press the Up/Down button to select the Smart menu and press the  
Right button, and then you can set a sub menu.  
Photo Size  
Flash  
:
Photo Size  
Flash  
12M  
8M  
:
3M  
Timer  
: Off  
Timer  
: Off  
Right button  
Volume  
:
Medium  
Volume  
:
Medium  
Exit  
Change  
Back  
Set  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the Smart menu  
Menu items available in Smart mode are as shown below.  
Main Menu  
Sub Menu  
Midway, Samoa  
Page  
Ê The items indicated by  
are default settings.  
Auckland, Wellington  
Guam, Sydney  
Seoul, Tokyo  
Bankok, Jakarta  
Almaty  
Main Menu  
Sub Menu  
Page  
p.36  
Okhotsk  
Adelaide, Darwin  
Beijing, Hong Kong  
Yangon  
4000X  
3264X  
2448  
2048X  
Photo Size  
3000  
800X592  
30 FPS  
Off  
1536  
320X240  
15 FPS  
Smart Flash  
10 Sec  
Movie Size  
Frame Rate  
Flash  
640X480  
20 FPS  
p.37  
p.27  
p.29  
Time Zone  
p.49  
Kathmandu  
Tashkent  
Mumbai, New Delhi  
Kabul  
Timer  
Off  
Abu Dhabi  
Teheran  
Off  
Low  
Volume  
Language  
p.45  
p.46  
p.47  
Moscow  
Athens, Helsinki  
-
Medium  
High  
Berlin, Paris, Rome  
No  
-
Format  
Yes  
p.48  
p.51  
Auto  
Dark  
Bright  
Display Brightness  
Video Out  
NTSC  
PAL  
Normal  
Ä For more information on how to set up the Smart menu, refer to the  
Normal mode sections.  
yyyy/mm/dd  
dd/mm/yyyy  
London  
mm/dd/yyyy  
Off  
Date & Time  
Time Zone  
p.49  
Cape Verde  
Mid-Atlantic  
Newfoundland  
Buenos Aires  
Caracas, La Paz  
Chicago, Dallas  
LA, San Francisco  
Hawaii, Honolulu  
p.49  
Miami, New York  
Denver, Phoenix  
Alaska  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart Play mode display  
Setting up the Smart Play menu  
The LCD monitor displays information about the Smart mode setting  
of the current photo.  
Ŷ Setting up the Smart Play menu  
You can use the Smart Play menu to set play mode functions easily.  
Menu items available in Smart Play mode are as shown below.  
Ê The items indicated by  
are default settings.  
Main Menu  
Sub Menu  
Page  
p.65  
ACB  
Red-eye Fix  
Edit  
Face Retouch  
Single  
9
-
3
View  
p.67  
20  
Multi Slide Show  
Delete  
Play  
Repeat  
All  
p.67  
p.69  
p.70  
Select  
Select  
Protect  
All  
No.  
1
Description  
Smart Play mode  
Voice Memo  
DPOF  
Icon  
Page  
p.53  
p.70  
p.71  
Ä For more information on how to set up the Smart Play menu, refer  
to the Normal mode sections.  
2
3
4
5
Protect  
p.70  
p.49  
Folder name & File name  
100-0010  
6
Memory card indicator  
-
7
8
Battery  
ISO  
p.14  
p.34  
-
80~3200  
F3.0 ~ F5.6  
9
Aperture value  
Shutter speed  
Flash  
10  
11  
12  
13  
8 ~ 1/1,500  
-
On/Off  
p.27  
p.36  
p.49  
Image size  
Recording date  
4000X3000 ~ 320X240  
2009/01/01  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PictBridge  
Ê Easy printing  
You can use the USB cable to connect this camera to a printer that  
supports PictBridge (sold separately) and print the stored images  
directly. Movie clips and voice files cannot be printed.  
When you connect the camera to printer  
in the Play back mode, you can print a  
picture easily.  
- Pressing the Left / Right button :  
Selects a previous / next image.  
- Pressing the OK button :  
Currently displayed image will be  
printed with the printer’s default setting.  
Ê Setting up the camera for connection to the printer  
1. Connect the camera and printer with USB cable.  
2. Once the camera is turned on, the camera automatically recognizes  
the printer and is connected to it.  
Print  
Menu  
Ä If automatic connection fails, set the [USB] menu to [Printer]. (p.52)  
Ä For a printer that can enable removable disks, set the [USB] menu  
to [Printer].  
Ê Connecting the Camera to a Printer  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PictBridge : Print Setting  
PictBridge : Picture Selection  
You can select images you want to print.  
You can select the Paper Size, Print Format, Paper Type, Print  
Quality, Date Print, and File Name Print menus for printed pictures.  
Images  
One Photo  
Ê Setting the Number of Copies to Print  
1. Press the Menu button and the  
PictBridge menu will display.  
2. Use the Up / Down buttons to  
select the [Images] menu and  
press the Right button.  
Size  
All Photos  
1. Press the Menu button and the  
Images  
Size  
Oe Pho  
Auto  
Layout  
Type  
:Auto  
:Auto  
:Auto  
PictBridge menu will display.  
2. Use the Up / Down buttons to select  
the desired menu, and then press the  
Right button.  
Postcard  
Card  
Layout  
Type  
Quality  
4x6  
L
Back  
Set  
2L  
Quality  
3. Use the Up / Down buttons to select a desired sub menu and  
press the OK button.  
- Select [One Photo] or [All Photos]. A screen where you can  
set the number of copies to print will appear as shown below.  
3. Use the Up / Down buttons to select  
the desired sub menu value, and then  
press the OK button.  
Back  
Set  
Menu  
Size  
Function  
Sub menu  
Set the size of the printing  
paper  
Auto, PostCard, Card, 4X6, L,  
2L, Letter, A4, A3  
0
1
Set the number of pictures to  
be printed on a sheet of paper 16, Index  
Auto, Full, 1, 2, 4, 8, 9,  
Layout  
Type  
Quantity  
Set  
Quantity  
Set  
[When [One Photo] is selected]  
[When [All Photos] is selected]  
Set the quality of the printing  
paper  
Auto, Plain, Photo,  
FastPhoto  
- Press the Up / Down button to select the number of prints.  
- When [One Photo] is selected : Use the Left / Right button to  
select another picture. After  
Set the quality of the picture  
to be printed  
Quality  
Auto, Draft, Normal, Fine  
selecting another picture, select  
the number of prints for another  
picture.  
Date  
Set whether to print the date  
Set whether to print the file name  
Auto, Off, On  
Auto, Off, On  
File Name  
- After setting the number of prints, press the OK button to save.  
- Press the Shutter button to return to the menu without setting  
the number of prints.  
Ä
Some menu options are not supported on all printers.  
If not supported, the menus are still displayed in the LCD, but are not  
selectable.  
4. Press the play mode button ( Î ) and images will be printed.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PictBridge : Reset  
Important notes  
Initialises user-changed configurations.  
Be sure to observe the following precautions!  
å This unit contains precision electronic components. Do not use or  
store this unit in the following locations.  
- Areas exposed to severe changes in temperature and humidity.  
- Areas exposed to dust and dirt.  
- Areas exposed to direct sunlight or the inside of a vehicle in hot  
weather.  
1. Use the Up / Down buttons to select  
the [Reset] menu tab. And then press  
the Right button.  
2. Use the Up / Down buttons to select  
the desired sub menu value, and then  
press the OK button.  
Date  
:Auto  
:Auto  
File Name  
Reset  
No  
Yes  
Back  
Set  
- Environments where there is high magnetism or excessive vibration.  
- Areas with high explosives or highly flammable materials.  
If [Yes] is selected : All print and image settings will be reset.  
If [No] is selected : Settings will not be reset.  
å
Do not leave this camera in places subject to dust, chemicals (like  
naphthalene and mothballs), high temperature and high humidity.  
Keep this camera with silica gel in a hermetically sealed box when  
not planning to use the camera for a long period of time  
Ä Default print setting varies depending on the printer manufacturer.  
For your printer’s default setting, refer to the user’s guide that  
came with your printer.  
å Sand can be particularly troublesome to cameras.  
- Do not let sand get inside the camera when using it on beaches,  
coastal dunes, or other areas where there is lots of sand.  
- Doing so may result in failure or may permanently render the  
camera unusable.  
å Handling the camera  
- Never drop the camera or subject it to severe shocks or vibrations.  
- Protect the large size LCD monitor from an impact. When this  
camera is not used, keep it in the camera case.  
- Avoid obstructing the lens or the flash when you capture an image.  
- This camera is not waterproof.  
To avoid dangerous electrical shocks, never hold or operate the  
camera with wet hands.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important notes  
å Camera Maintenance  
- If you use this camera in wet places, such as beach or pool, do  
not let water or sand get inside the camera. Doing so may result  
in failure or may permanently damage the unit.  
- Use a soft brush (available from photo stores) to gently clean the  
lens and LCD assemblies. If this does not work, lens-cleaning  
paper with lens cleaning fluid can be used.  
Clean the camera body with a soft cloth. Do not allow this  
camera to come into contact with solvent materials such as  
benzol, insecticide, thinners etc. This may damage the body  
shell of the camera and also affect its performance. Rough  
handling can damage the LCD monitor. Take care to avoid  
damage and keep the camera in its protective carry case at all  
times when not in use.  
å Extremes in temperature may cause problems.  
- If the camera is transferred from a cold to a warm and humid  
environment, condensation can form on the delicate electronic  
circuitry. If this occurs, turn the camera off and wait for at least  
1 hour until all moisture is dispersed. Moisture built up can also  
occur on the memory card. If this happens, turn off the  
camera and remove the memory card. Wait until the moisture  
has dispersed.  
å Do not attempt to disassemble or modify the camera.  
å Caution on Using the Lens  
å Under certain conditions, static electricity can cause the flash unit  
to fire. This is not harmful to the camera and is not a malfunction.  
- If the lens is subjected to direct sunlight, it could result in the  
discoloration and deterioration of the image sensor.  
- Take care not to get fingerprints or foreign substances on the  
surface of the lens.  
å When images are uploaded or downloaded, the data transfer may  
be affected by static electricity. In this case, disconnect and re-  
connect the USB cable before trying the transfer again.  
å If the digital camera is not used for a long period, an electric  
discharge can occur. It is a good idea to remove the battery and  
the memory card if you do not intend using the camera for an  
extended period of time.  
å Before an important event or going on a trip, you should check  
the camera condition.  
- Take a picture for testing the camera condition and prepare extra battery.  
- Samsung cannot be held responsible for camera malfunctions.  
å If the camera is exposed to an electronic interference, it will turn  
itself off to protect the memory card.  
å
If the digital camera is not used for a long period, the date and time  
may adopt the default settings by automatical battery discharged. In  
this case, reset the date and time correctly before the recording.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important notes  
Warning indicator  
å
Tempered glass is used for the camera’s LCD monitor, but excessive  
shock may damage the glass. If there are any cracks in it, do not  
touch them, or you may injure yourself.  
There are several warnings that may appear on the LCD display.  
[Card Error]  
åMemory card error  
à Turn off the camera power and turn it on again  
à Insert the memory card again  
à Insert and format the memory card (p.49)  
[Card Locked]  
åThe memory card is locked  
à SD/SDHC memory card : Slide the write protect switch to the  
top of the memory card  
[Memory Full]  
å The memory card or internal memory is full.  
à Insert new memory card.  
à Delete the unnecessary image files  
[No Image File]  
åThere are no images stored on the memory  
à Take images  
à Insert a memory card that is holding some images  
[File Error]  
åFile error  
à Delete the file.  
åMemory card error  
à Contact a camera service centre.  
[Low Battery]  
åThere is low battery capacity  
à Insert fresh batteries.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service centre  
Please check the following  
Camera does not take images when pressing the Shutter button  
åThere is insufficient memory capacity  
à Delete unnecessary image files  
The camera doesn’t switch on  
åThere is low battery capacity  
à Insert fresh batteries. (p.14)  
åThe memory card has not been formatted  
à Format the memory card (p.48)  
åBattery is inserted incorrectly with the polarities reversed.  
à Insert the battery according to the polarity marks (+, -).  
åThe memory card is exhausted  
à Insert a new memory card  
åThe memory card is locked  
The camera power ceases while in use  
åThe battery is exhausted  
à Refer to [Card Locked] error message  
åThe camera's power is off  
à Insert fresh batteries.  
à Turn the camera power on  
åThe Camera is turned off automatically  
à Turn on the camera power again.  
åThe battery is exhausted  
à Insert fresh batteries (p.14)  
åOperation has ceased in a low temperature outside of the camera  
usage temperature range.  
åBattery is inserted incorrectly with the polarities reversed.  
à Insert the battery according to the polarity marks (+, -)  
à Make the camera and battery warm by placing them in your  
pocket, etc. and then immediately before shooting, place the  
battery in the camera and then shoot.  
The camera suddenly stops working while in use  
åThe camera stopped due to a malfunction  
à Remove /re-insert battery and switch the camera on  
The images are unclear  
åA picture was taken of the subject without setting an appropriate  
macro mode  
à Select an appropriate macro mode to take a clear image.  
åTaking a picture beyond the flash range  
à Take a picture within the flash range  
åThe lens is smudged or dirty  
à Clean the lens  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service centre  
The flash does not fire  
No image on external monitor  
åFlash off mode has been selected  
à Dis-engage flash off mode  
å The external monitor has not been connected properly with  
the camera  
åThe camera mode can't use the flash  
à Refer to the FLASH instruction (p.27)  
à Check the connection cables  
åThere are incorrect files in the memory card  
à Insert a memory card that has correct files  
Incorrect date and time is displayed  
å The date and time have been set incorrectly or the camera has  
adopted the default settings  
ÃReset the date and time correctly  
When using the PC’s explorer, the [Removable Disk] file does not show  
åCable connection is incorrect  
à Check the connection  
åThe camera is off  
The camera buttons do not operate  
åCamera malfunction  
à Remove/re-insert battery and switch the camera on  
à Turn the camera on  
å
The operating system is not Windows 2000, XP, Vista / Mac OS  
10.3. Alternatively the PC does not support USB  
à Install Windows 2000, XP, Vista / Mac OS 10.3 to PC that  
supports USB  
A card error has occurred while the memory card is in the camera.  
åIncorrect memory card format  
à Re-format the memory card  
A part of the LCD screen does not occasionally turn on or a spot appears.  
åAlthough the LCD screen is manufactured with high precision  
technology, the precision pixels are not occasionally lighted or the  
red, white and blue spots appear.  
The images don't play back  
åIncorrect file name (Violation of DCF format)  
à Do not change the image file name  
ĺ
This phenomenon does not affect the quality of the recorded  
image and it is not a malfunction.  
Colour of image is different to the original scene  
åWhite balance or effect setting is incorrect  
à Select appropriate White balance and effect  
A vertical line appears on the LCD screen when taking a picture of a  
bright object.  
Images are too bright  
åExposure is excessive  
à Reset exposure compensation  
åIf a subject is exposing bright lights, a gray, black, red or purple  
vertical line may appear.  
ĺ
This is a phenomenon called smear and it does not affect the  
quality of the recorded image. This is not a malfunction.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Image Sensor - Type : 1/2.33" CCD  
Flash  
- Modes : Auto, Auto & Red-eye reduction, Fill-in  
flash, Slow sync, Flash off, Red Eye Fix  
- Range : Wide : 0.4m ~ 3.0m,  
- Effective Pixel : Approx. 12.2 Mega-pixel  
- Total Pixel : Approx. 12.4 Mega-pixel  
Tele : 0.5m ~ 2.0m  
- Recharging Time : Approx. 4 sec  
Lens  
- Focal Length : SAMSUNG Lens f = 6.3 ~ 18.9mm  
(35mm film equivalent : 35 ~ 105mm)  
- F No. : F3.0(W) ~ F5.6(T)  
Sharpness  
- Soft+, Soft, Normal, Vivid, Vivid+  
- Digital Zoom : ·Still Image mode :1.0X ~ 5.0X  
·Play mode : 1.0X ~ 10.2X  
White Balance  
- Auto, Daylight, Cloudy, Fluorescent_H,  
Fluorescent_L, Tungsten, Custom  
(depends on image size)  
Voice Recording - Voice Recording (max. 10 hours)  
- Voice Memo in Still Image (max. 10 sec.)  
LCD Monitor  
Focusing  
- 2.7" color TFT LCD (230,000 dots)  
-
Type : TTL auto focus  
(Multi AF, Center AF, Face Detection AF)  
Date Imprinting - Date, Date & Time, Off (user selectable)  
Shooting  
- Still Image  
Mode : Smart Auto, Program  
·Smart Auto : Portrait, Night Portrait, Night,  
Backlight Portrait, Backlight,  
- Range  
·
Normal  
Macro  
Wide  
Tele  
10cm ~ 80cm  
50cm ~ 80cm  
80cm ~ Infinity  
Landscape, White, Macro, Macro  
Text, Tripod, Action  
·Shooting : Single, Continuous, Motion Capture, AEB  
·Self-timer : 10 sec., 2 sec., Double,  
Motion Timer  
Shutter  
- Smart Auto : 8 ~ 1/1,500 sec.,  
Program : 1 ~ 1/1,500 sec.  
(AEB, Continuous : 1/4 ~ 1/1,500 sec.)  
Exposure  
- Control : Program AE  
- Metering : Multi, Spot, Center-Weighted,  
Face Detection AE  
- Compensation : ±2EV (1/3EV steps)  
- ISO : Auto, 80, 100, 200, 400, 800, 1600, 3200  
(Up to 3M Size)  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
- Movie Clip  
- Capacity (1GB Size)  
·With Audio or without Audio  
(user selectable, recording time : max 20 min.)  
·
Size : 800x592(20 fps), 640x480(30 fps & 15 fps),  
320x240(30 fps & 15 fps)  
Super Fine About 169 About 196 About 231 About 246 About 365 About 548 About 986  
Fine  
About 240 About 270 About 308 About 328 About 493 About 680 About 1095  
·Frame rate : 30 fps, 20 fps, 15 fps  
·3X Optical Zoom, Mute during zoom operation,  
sound recording on/ off selectable  
·Movie Editing (Embedded): Movie Stabilization,  
Pause during recording, Still Image Capture,  
Time Trimming  
Normal About 365 About 411 About 481 About 519 About 705 About 759 About 1232  
Ä These figures are measured under Samsung standard conditions and  
may vary depending on shooting conditions and camera settings.  
Effect  
- Effect : Photo Style Selector, Image Adjust  
(Sharpness, Contrast, Saturation)  
Storage  
- Media  
·Internal memory : About 31MB flash memory  
·External Memory (Optional) :  
MMC card (Up to 2GB guaranteed)  
SD card (Up to 4GB guaranteed)  
SDHC card (Up to 8GB guaranteed)  
- File Format  
·Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1,  
PictBridge 1.0  
·Movie Clip : AVI (MPEG-4)  
·Audio : WAV  
-
Editing : Resize, Rotate, Photo Style Selector,  
Image Adjust (ACB, Face Retouch, Red  
Eye Fix, Brightness, Contrast, Saturation,  
Add Noise)  
Image Play  
Interface  
- Type : Single image, Thumbnails, Multi slide show,  
Movie Clip, Smart Album  
Ä Multi slide show : Slide show with Effect & Music  
- Digital output connector : USB 2.0  
- Audio : Mono  
- Video output : NTSC, PAL (user selectable)  
- DC power input connector : 4.2 V  
- Image Size  
4000X  
3000  
3984X  
2656  
3968X  
2232  
3264X  
2448  
2592X  
1944  
2048X  
1536  
1024X  
768  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power Source  
- Rechargeable battery : SLB-07A, 3.7V  
(720mAh)  
Ä Included battery may vary depending on  
sales region.  
Dimensions (WxHxD)  
Weight  
-
94.2 x 55.7 x 16.6mm (excluding protrusions)  
94.2 x 55.7 x 14.2mm (Minimum thinness)  
-
Approx. 121.4g (without batteries and card)  
Operating Temperature - 0 ~ 40°C  
Operating Humidity  
Software  
- 5 ~ 85%  
- Samsung Master, Adobe Reader  
Specifications are subject to change without prior notice.  
All trademarks are the property of their respective owners.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Requirements  
Software Notes  
Please ensure that you read the instruction manual carefully before use.  
- Under no circumstances should all or part of either the software  
or the user manual be reproduced.  
- Copyrights for software are licensed only for use with a camera.  
- In the unlikely event of a manufacturing fault, we will repair or  
exchange your camera. We cannot, however, be held responsible  
in any way for damage caused by inappropriate use.  
- Using a Hand-made PC or a PC and OS that has not been  
guaranteed by the manufacturer is not covered by the Samsung  
warranty.  
For Windows  
For Macintosh  
Power Mac G3 or later  
PC with processor better  
Mac OS 10.3 or later  
Minimum 256MB RAM  
(Over 512MB recommended)  
110MB of available hard disk  
space  
than Pentium III 500MHz  
(Pentium III 800MHz recommended)  
Windows 2000 / XP / Vista  
Minimum 256MB RAM  
(Over 512MB recommended)  
250MB of available hard disk  
space (Over 1GB recommend)  
1024x768 pixels, 16bit color  
USB  
Connection  
Specifications  
- Before reading this manual, you should have a basic knowledge  
of computers and O/S (Operating Systems).  
Software  
Support  
Specifications  
-
display compatible monitor  
(24bit color display recommended)  
Microsoft DirectX 9.0c or later  
Ä It is not compatible with Windows XP and Vista 64-bit Edition.  
Ä Samsung is not responsible for any defects or damages caused  
by the use of unauthorized computer including an assembled PC.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the software  
After inserting the CD-ROM provided with this camera into the  
CD-ROM drive, the following window should automatically run.  
å You should allow 5 ~ 10 seconds for running the automatic  
setup program according to the capability of your computer.  
If the frame does not appear, run the [Windows Explorer] and  
select [Installer.exe] in the CD-ROM Drive root directory.  
ÊXviD codec : This makes movie clips (MPEG-4) recorded with this  
camera play back on a PC.  
To play back a movie clip recorded with this camera, you must install  
the XviD codec. If a movie clip recorded with this camera does not  
play well, install this codec. This software is only compatible with  
Windows.  
ÊSamsung Master : This is the all-in-one multi media software  
solution.  
You can download, view, edit and save your digital images and  
movie clips with this software. This software is only compatible  
with Windows.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the application software  
To use this camera with a PC, install the application software first.  
After this has been done, the stored images in the camera can be  
moved to the PC and can be edited by an image editing program.  
2. Install DirectX, XviD, Samsung Master by selecting a button  
shown on the monitor. If a recent version of DirectX has been  
installed on your computer, DirectX may not be installed.  
å You can visit the Samsung web-site through the internet.  
http://www.samsung.com  
1. The auto run frame will display.  
Click the [Samsung Digital  
Camera Installer] menu in the  
Auto run frame.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the application software  
3. To play back the movie clip recorded with this camera on the  
computer, install the XviD codec.  
4. Install the software by instructions on the monitor.  
Ä The XviD codec is distributed according to the GNU General  
Public License and everyone can copy, distribute and change this  
codec. This License applies to any program or other work which  
contains a notice placed by the copyright holder saying it may be  
distributed under the terms of this General Public License. For  
more information, see the License documents (http://www.gnu.  
org/copyleft/gpl.html).  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the application software  
Starting PC mode  
If you connect the USB cable to a USB port on your PC and then  
turn on the power, the camera will automatically switch to "computer  
connection mode". In this mode, you can download stored images  
to your PC through the USB cable.  
5. After restarting the computer, connect the PC to the camera with  
the USB cable.  
6. Turn the camera power on.  
The [Found New Hardware Wizard]  
will open and the computer will  
recognise the camera.  
Ê Camera settings for connection  
1. Turn on the camera.  
2. Connect the camera and computer with the supplied USB  
cable.  
3. Once the camera is turned on, the camera automatically  
recognizes the computer and is connected to it.  
Ä If automatic connection fails, set the [USB] menu to [Computer].  
Ä If your OS is Windows XP/ Vista, an image viewer program will  
(p.52)  
open.  
å PDF documents of user manual are included in the Software  
CD-ROM supplied with this camera. Search the PDF files with  
Windows explorer. Before opening the PDF files, you must  
install the Adobe Reader included in the Software CD-ROM.  
Install Adobe Reader from the CD provided. If the Internet is  
not enabled, install Adobe Reader by using the executable file  
located in the CD.  
å To install the Adobe Reader 6.0.1 correctly, Internet Explorer  
5.01 or later has to be installed. Visit "www.microsoft.com" and  
upgrade the Internet Explorer.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting PC mode  
Ê Downloading stored images  
Ê Connecting the camera to a PC  
You can download the still images stored on the camera to your  
PC's hard disk and print them or use a photo editing software to  
edit them.  
1. Connect the camera to your PC with the USB cable.  
2. On your computer's desktop display,  
select [My computer] and double  
click [Removable Disk à DCIMà  
100SSCAM].The image files will  
then be displayed.  
Ê Disconnecting the camera and PC  
Refer to page 97 (Removing the removable disk).  
3. Select an image and press the right  
mouse button.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting PC mode  
4. A pop-up menu will open.  
Click the [Cut] or [Copy] menu.  
- By using [Samsung Master], you can see the stored images in the  
memory directly on the PC monitor and you can copy or move the  
image files.  
- [Cut]  
: cuts a selected file.  
- [Copy] : copies files.  
å
å
We recommend that you should copy the images to the PC to  
view them. Opening images directly from the removable disk  
may be subject to unexpected disconnection.  
When you upload a file that is not taken by this camera to the  
Removable Disk, the [File Error] message will be displayed on  
the LCD monitor in the PLAY mode, and nothing is displayed in  
THUMBNAIL mode.  
5. Click a folder where you want to paste the file.  
6. Press the right mouse button and a  
pop-up menu will open.  
Click [Paste].  
7. An image file is transferred from the  
camera to your PC.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removing the removable disk  
5. A [Safe to Remove Hardware] window  
will open. Click the [OK] button.  
Ê Windows 2000/XP/Vista  
(The illustrations may differ from those shown depending on the  
Windows O/S.)  
1. Check whether the camera and PC are transferring a file.  
If the camera status lamp blinks, please wait until the lamp has  
finished blinking and is constantly on.  
6. A [Unplug or Eject Hardware] window  
will open. Click the [Close] button and  
the removable disk will be removed  
safely.  
2. Double-click the [Unplug or Eject  
Hardware] icon on the task bar.  
[Double-click!]  
7. Unplug the USB cable.  
3. The [Unplug or Eject Hardware]  
window will open. Select the [USB  
Mass Storage Device] and click the  
[Stop] button.  
4. The [Stop a Hardware device]  
window will open. Select the [USB  
Mass Storage Device] and click the  
[OK] button.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Master  
You can download, view, edit and save your images and movies  
with this software. This software is only compatible with Windows.  
To start the program, click [Start à Programs ÃSamsung à  
Samsung Master].  
4. Select a destination and make  
a folder to save downloaded  
images and folders.  
- Folder names can be made in  
order of date and images will be  
downloaded.  
- Folder name will be made as  
you want and images will be  
downloaded.  
Ê Downloading images  
1. Connect the camera to your PC.  
2. A window for downloading images  
will be displayed after connecting  
the camera to your PC.  
- After selecting a folder that was  
made before, images will be  
downloaded.  
- To download the captured images,  
select the [Select All] button.  
5. Click [Next >] button.  
- Select desired folder in the  
window and click the [Select All]  
button. You can save captured  
images and selected folder.  
6. A window will open as shown  
alongside.  
The destination of the selected  
folder will be displayed on the  
upper side of the window.  
Click the [Start] button to  
download the images.  
- If you click the [Cancel] button, downloading will be cancelled.  
3. Click [Next >] button.  
7. Downloaded images will be  
displayed.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Master  
Ê Image viewer : You can view the stored images.  
Ê Image edit : You can edit the still image.  
- Image viewer functions are listed below.  
Ì Menu bar : You can select menus. File, Edit, View, Tools,  
Change functions, Auto download, help, etc.  
Í Image selection window : You can select the desired images  
in this window.  
Î Media type selection menu : You can select image viewer, image edit  
and movie edit functions in this menu.  
Ï Preview window : You can preview an image or a movie clip and  
check the multi media information.  
Ð Zoom bar : You can change preview size.  
Ñ Folder display window : You can see the folder location of the  
selected image.  
- Image edit functions are listed below.  
Ì Edit menu : You can select the following menus.  
[Tools]  
: You can resize or crop the selected image. See the  
[Help] menu.  
[Adjust] : You can modify image quality. See the [Help] menu.  
[Retouch]: You can change image or insert effects on the image.  
See the [Help] menu.  
Í Drawing tools : Tools for editing an image.  
Î Image display window : A selected image displays in this window.  
Ï Preview window : You can preview the changed image.  
Ò Image display window : Images of the selected folder are displayed.  
Ä A still image edited with Samsung Master can’t be played back on  
the camera.  
Ä Refer to the [Help] menu in Samsung Master for further information.  
Ä Refer to the [Help] menu in Samsung Master for further information.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Master  
Ê Movie edit : You can get the still image, movie clip, narration,  
Ä Some movie clips that were compressed with a codec that is  
not compatible with the Samsung Master can’t play back in the  
Samsung Master.  
music files together in a movie clip.  
Ä Refer to the [Help] menu in Samsung Master for further information.  
- Movie clip edit functions are listed below.  
Ì Edit menu : You can select the following menus.  
[Add Media] : You can add other media elements to a movie.  
[Edit Clip]  
: You can change the brightness, contrast, colour  
and saturation.  
[Effects]  
: You can insert an effect.  
[Set Text]  
[Narrate]  
[Produce]  
: You can insert texts.  
: You can insert a narration.  
: You can save the edited multi media as a new file  
name. You can select AVI, Windows media (wmv)  
and Windows media (asf) file types.  
Í Frame display window : You can insert multi media in this window.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up the USB Driver for MAC  
Using the USB Driver for MAC  
1. A USB Driver for MAC is not included with the software CD as  
MAC OS supports the camera driver.  
1. Double click a new icon on the desktop and the folder in the  
memory will be displayed.  
2. Check the MAC OS version during start-up. This camera is  
compatible with MAC OS 10.3.  
2. Select an image file and copy or move it to MAC.  
3. Connect the camera to the Macintosh and turn the camera power  
on.  
4. A new icon will be displayed on the desktop after connecting the  
camera to the MAC.  
å
First complete uploading from computer to camera and then  
remove the removable disk with the Extract command.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FAQ  
Please check the following if the USB connection malfunctions.  
Case 6  
When I open the Device Manager (by clicking Start  
(Settings) Control Panel (Performance and Main-  
tenance) System (Hardware) Device Manager),  
there are Unknown Devices or Other Devices entries  
with a yellow question mark(?) beside them or devices  
with an exclamation mark(!) beside them.  
Case 1  
USB cable is not connected or it is not the supplied  
USB cable.  
à Connect the supplied USB cable.  
à Right-click on the entry with the question (?) or exclamation  
(!) mark and select "Remove". Restart the PC and connect  
the camera again.  
Case 2  
The camera is not recognised by your PC.  
Sometimes, the camera may appear under [Unknown  
Devices] in Device Manager.  
à Turn off the camera, remove the USB cable, plug in the  
USB cable again, and then turn on the camera.  
Case 7  
In some security programs (Norton Anti Virus, V3,  
etc.), the computer may not recognise the camera as a  
removable disk.  
Case 3  
Case 4  
There is an unexpected error during file transfer.  
à Turn the camera power off and on again. Transfer the  
file again.  
à Stop the security programs and connect the camera to  
the computer. Refer to the security program instructions  
about how to temporarily disable the program.  
When using the USB hub.  
à There may be a problem in connecting the camera to  
the PC through the USB hub if the PC and the hub are  
not compatible. Wherever possible, connect the camera  
to the PC directly.  
Case 8  
The camera is connected to the USB port located on  
the front of the computer.  
à When the camera is connected to the USB port located  
on the front of the computer, the computer may not  
recognise the camera. Connect the camera to the USB  
port located on the back of the computer.  
Case 5  
Are other USB cables connected to the PC?  
à The camera may malfunction when it is connected to  
the PC at the same time as another USB cable. In this  
case, disconnect the other USB cable, and connect  
only one USB cable to the camera.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FAQ  
Ê When the movie clip doesn’t play back on the PC  
Ê When the DirectX 9.0c or later is not installed  
à Install the DirectX 9.0c or later  
Ä When the movie clip recorded by the camera doesn’t play back  
on the PC, the causes are mostly due to the codec installed on  
the PC.  
1) Insert the CD provided with the camera  
2) Run the windows explorer and select the [CD-ROM drive:\  
DirectX] folder and click the DXSETUP.exe file.  
The DirectX will be installed. Visit the following site for  
downloading the DirectX.http://www.microsoft.com/directx  
Ê When codec for play back the movie clip isn’t installed  
à Install the codec as listed below.  
[Installing codec for Windows]  
à Installing the XviD codec  
1) Insert the CD provided with the camera.  
Ê
If a PC connected with the camera stops responding while Windows  
is starting.  
Ã
In this case, disconnect the PC and the camera and Windows  
will start. If the problem happens continuously, set the Legacy  
USB Support to disable and re-start the PC. The Legacy USB  
Support is in the BIOS setup menu. (The BIOS setup menu  
differs from the PC manufacturers and some BIOS menus don’t  
have Legacy USB Support) If you can’t change the menu by  
yourself, contact to the PC manufacturer or BIOS manufacturer.  
2) Run the windows explorer and select [CD-ROM drive:\XviD]  
folder and click the XviD-1.1.2-01112006.exe file.  
Ä The XviD codec is distributed according to the GNU General  
Public License and everyone can copy, distribute and  
change this codec. This License applies to any program or  
other work which contains a notice placed by the copyright  
holder saying it may be distributed under the terms of this  
General Public License. For more information, see the  
License documents (http://www.gnu.org/copyleft/gpl.html).  
Ê If the movie clip can’t be deleted, or the removable disk can’t be  
extracted or an error message displays during the file transfer.  
Ã
If you install only the Samsung Master, the problems mentioned  
above occasionally happen.  
[Installing codec for Mac OS]  
1) Visit the following site for downloading the codec.  
(http://www.divx.com/divx/mac)  
2) Click the [Free Download] menu on the top right side of the  
window then download windows appears.  
-
Close the Samsung Master program by clicking the Samsung  
Master icon on the Taskbar.  
-
Install all the application programs included in the software CD.  
3) Check the version of Mac OS and click the [Download]  
button to download the file and save it on a desired folder.  
4) Run the downloaded file and the codec for playing back the  
movie clip will be installed.  
Samsung Eco-mark  
It is Samsung’s own symbol mark is used to effectively  
communicate Samsung’s environmental friendly product  
activities to the consumers. The mark represents  
Samsung’s continuous effort on development of  
environmental conscious products.  
Ä If the movie file is not played back on the Macintosh OS,  
use a media player that supports Xvid codec (e.g: Mplayer).  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC notice  
Ê
Declaration of Conformity  
Ê NOTE :  
Trade Name  
Model No.  
: SAMSUNG ELECTRONICS AMERICA, INC.  
: SAMSUNG TL100  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Responsible Party : SAMSUNG ELECTRONICS AMERICA, INC.  
Address : 105 Challenger Road Ridgefield Park NJ  
Telephone No. : 1-800-SAMSUNG(726-7864)  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause  
undesired operation.  
- Reorient or relocate the receiving antenna.  
- Increase the distance between the equipment and receiver.  
- Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
Ê CAUTION :  
Changes or modifications not expressly approved by the manufacturer  
responsible for compliance could void the user’s authority to operate  
the equipment.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Speaker System RS2046 User Guide
Remington GPS Receiver OCN6 User Guide
Revolabs Microphone 02 DSKSYS User Guide
RocketFish Headphones RF CNA2 User Guide
Roland Music Mixer 5100011346 01 User Guide
Runco Projector VX 4c 1024P User Guide
Samson Computer Monitor 100 User Guide
Sanyo All in One Printer POA PJNM01 User Guide
SciPhone Cell Phone I68 User Guide
Seagate Computer Drive ST136403LW LC User Guide