Download from Www.Somanuals.com. All Manuals Search And Download.
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
å Do not attempt to modify this camera in any way. To do so may
result in fire, injury, electric shock or severe damage to you or
your camera. internal inspection, maintenance and repairs should
only be carried out by your dealer or Samsung Camera Service
center.
å Please do not use this product in close proximity to flammable or
explosive gases, as this could increase the risk of explosion.
å Should any form of liquid or a foreign object enter the camera,
do not use it. Switch off the camera, and then disconnect the
power source. You must contact your dealer or Samsung Camera
Service center. Do not continue to use the camera as this may
cause a fire or electric shock.
å Do not insert or drop metallic or inflammable foreign objects into
the camera through access points e.g. the memory card slot and
battery chamber. This may cause a fire or electric shock.
å Do not operate this camera with wet hands. This could pose a
risk of electric shock.
å Do not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes may cause
eyesight damage.
å For safety reasons keep this product and accessories out of
reach of children or animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident
should occur, please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
å Battery and camera may become hot during prolonged use and it
may result in camera malfunction. Should this be the case, allow
the camera to sit idle for a few minutes to allow it time to cool.
å Do not leave this camera in places subject to extremely high
temperatures, such as a sealed vehicle, direct sunlight or other
places of extremes in temperature. Exposure to extreme
temperatures may adversely affect the camera’s internal
components and could cause a fire.
å
When in use, do not cover the camera or Charger. This may cause
heat to build up and distort the camera body or cause a fire. Always
use the camera and its accessories in a well-ventilated area.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Contents
007 System chart
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
READY
007
007
Package Contents
Sold Separately
å Leaking, overheating, or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
å Remove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
å Do not fire the flash while it is in contact with hands or objects. Do
not touch the flash after using it continuously. It may cause burns.
å Do not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
å Take care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
å Avoid obstructing the lens or the flash when you capture an image.
å When using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
- It takes longer to turn on the LCD monitor and the color may
differ from the subject.
- When changing the composition, there may be an after image on
the LCD monitor.
008 Identification of features
008
009
010
010
011
011
011
Front & Top
Back
Bottom
5 Function button
Self-timer lamp
Camera Status Lamp
Mode icon
012 Connecting to a Power Source
015 Inserting the memory card
016 Instructions on how to use the memory card
018 When using the camera for the first time
019 LCD monitor indicator
020 How to use the menu
021 Starting the recording mode
RECORDING
021
021
023
023
Selecting modes
How to use the Smart Auto mode
How to use the Program mode
How to use the DUAL IS (Dual Image
Stabilization) mode
å Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
024
026
How to use the Scene modes
How to use the Movie clip mode
å Never connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
043
046
047
047
047
048
048
049
050
051
051
052
052
053
054
054
Face Detection
Smart FR Edit
026
027
027
Recording HD (High Definition) movie clips
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
Face Tone
Face Retouch
028 Things to Watch Out for When Taking
Pictures
Auto Focus type
Metering
029 Using the camera buttons to set the camera
029 POWER button
Photo Style Selector
Smart Filter
029 SHUTTER button
029 Smart button
Image Adjust
ACB
030 Zoom W/T Lever
031 Info (DISP) / Up button
032 Macro / Down button
033 Focus lock
Drive mode
OIS (Optical image Stabilization)
Voice Memo
Voice Recording
Recording the movie clip without voice
Setting movie recording
034 Flash / Left button
036 Self-timer / Right button
038 MENU button
038 OK button
055 Smart mode
SMART MODE
038 Shooting
055 Smart mode display
056 Starting Smart mode
039
How to Enable Functions Using the
MENU Button
056
057
057
Selecting modes
040
040
041
041
042
Photo Size / Movie Size
Quality / Frame rate
Exposure compensation
ISO
How to use Smart Auto mode
How to use Smart Movie Clip mode
058 Sound menu
058 Sound
SETUP
White balance
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
058
058
058
058
059
Volume
066 Starting play mode
PLAY
Start up sound
Shutter sound
Beep sound
AF sound
066
066
067
067
068
Playing back a still image
Playing back a movie clip
Movie clip capture function
Playing back a recorded voice
Playing back a voice memo
059 Setup menu
059 Display
068 LCD monitor Indicator
059
059
060
060
060
060
Language
069 Using the camera buttons to set the camera
069 Play mode button
Function Description
Start up image
Display Brightness
Quick view
069 Thumbnail / Enlargement Lever
069
Smart Album
072 Info (DISP) / Up button
072 Play & Pause / OK button
073 Left / Right / Down / MENU button
073 Delete button
Display Save
061 Settings
061
061
062
062
062
063
063
064
065
065
065
Formatting a memory
Initialization
074 Setting up the play back function using
the LCD monitor
Setting up the Date / Time / Date type
Time Zone
076 Edit
File name
076
077
077
078
079
Resize
Imprinting the recording date
Auto power off
Rotating an image
Photo Style Selector
Smart Filter
Selecting Video out type
Auto Focus lamp
Setting the USB
Image Adjust
081 Starting the Multi Slide Show
PC Software
081
081
Start the Multi Slide Show
Selecting Images
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
103
For Mac users
082
082
082
Setting play interval
105 FAQ
Setting Background Music
Configure Multi Slide Show effects
083 File Options
083
083
084
085
085
086
088
Deleting images
Protecting images
Face List Edit
Recycle Bin
Voice memo
DPOF
Copy to Card
089 PictBridge
PICTBRIDGE
090 PictBridge : Picture Selection
090 PictBridge : Print Setting
091 PictBridge : Reset
APPENDIX 091 Important notes
093 Warning indicator
094 Before contacting a service center
096 Specifications
SOFTWARE
099 Transferring files to your computer
(for Windows)
099
For Windows users
TraDnsofewrrninlogafidlefsrotomyoWurwcwom.Spoumtera(nfouraMlsa.cc)om. All Manuals Search And Download.
103
6
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
optional equipment, contact your nearest Samsung dealer or Samsung service center. Parts and accessories illustrated below may differ
from exact appearance.
Package Contents
Software CD
(User manual included)
Camera
Rechargeable battery
AC adapter / USB cable
Camera strap
Quick Start Manual
Sold Separately
Memory card (microSDTM)
(see p.17)
Camera case
AV cable
Battery charger
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Front & Top
Zoom T Lever (Digital zoom)
Zoom W Lever (Thumbnail)
POWER button
Microphone
Smart button
Shutter button
Speaker
Self-timer lamp /
AF Lamp
Flash
Lens / Lens cover
USB / AV / DC terminal
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Back
Camera status lamp
MODE button
Strap eyelet
LCD monitor
5 function button
MENU button
Play mode button
Fn / Delete button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Bottom
5 Function button
Battery chamber
Information / Up button
OK / Play & Pause
button
Self-timer /
Right button
Flash /
Left button
Battery
holder
Macro / Down button
Battery chamber cover
Memory card slot
Tripod socket
Ä
To open the battery chamber cover, slide it in the direction shown
above.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Self-timer lamp
Mode icon
Icon
Status
Description
Refer to page 21/56 for more information about the camera mode
setting.
- For the first 8 seconds, the lamp blinks at 1 second
intervals.
- For the final 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
MODE
ICON
MODE
ICON
Smart Auto
Program
DUAL IS
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
Blinking
Blinking
Scene
Movie
Smart Movie
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
After pressing the Shutter button, the image is taken
in accordance with the subject’s movement.
SCENE
MODE
Beauty Shot
Portrait
Frame Guide
Night
Landscape
Sunset
Fireworks
-
Camera Status Lamp
ICON
MODE
ICON
MODE
ICON
MODE
ICON
MODE
ICON
Status
Description
The lamp turns on and off when the camera
is ready to take a picture
The lamp blinks while saving the image data and
turns off when the camera is ready to take a picture
Power on
Children
Text
After taking a picture
When flash battery is charging The lamp blinks
Close Up
Dawn
When the USB cable is
inserted to a PC
The lamp lights up
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
Backlight
-
When the USB cable is
The lamp blinks
inserted into a printer
When the printer is printing The lamp blinks
Beach & Snow
The lamp turns on
(The camera focus on the subject)
When the AF activates
The lamp blinks
(The camera doesn’t focus on the subject)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Power Source
Important information about battery usage.
You should use the rechargeable battery BP70A supplied with the
camera. Be sure to charge the battery before using the camera.
å When camera is not in use, turn off the power.
å Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
å Low temperatures (below 0°C) can affect the performance
of the battery and you may experience reduced battery life.
å Batteries will usually recover at normal temperatures.
å During extended use of the camera, the camera body may
become warm. This is perfectly normal.
Ê BP70A rechargeable battery Specification
Model
BP70A
Type
Lithium lon
Capacity
Voltage
740mAh
3.7V
Charging time
Approximately 150 Minutes
Ê Number of images and battery life: Using the BP70A
Ê If you connect the AC adapter to the USB cable, you can use it
as an AC cable and recharge the spare battery with it.
Battery life /
Conditions
Number of images
Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: 30Sec.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
Approx. 100 MIN / Changing the zoom position between
Approx. 200 shots the Wide and the Tele after every shot.
Still image
Using the flash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Using the fully charged battery
Approx. 80 MIN 640x480 image size
30 fps frame rate
- Using a USB cable
Movie
: Remove the AC adapter.You can
download stored images to your
PC (p.100) or supply the power
to your camera through the USB
cable.
Ä These figures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Power Source
Important information about USB cable usage.
å Use a USB cable with the correct specification.
å If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
å If the camera and other devices are connected to the PC at
the same time : remove other device.
å
Before inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
å If the charging LED of the AC Charger does not turn on or
blink after inserting the rechargeable battery, please check
whether the battery is inserted correctly.
å Camera can not be detected using the front side USB port
of computer. In this case, use the back side USB port of
computer.
å If you charge the battery with the camera power on, the
battery won’t be fully charged. Turn the camera off while
charging the battery.
å If the USB port of the PC doesn’t meet the Power output
standard (5V, 500mA), the battery may not be charged.
Ê Charging LED of the AC charger
Charging LED
Being Charged
Charging is complete
Charging error
Red LED is on
Green LED is on
Ê How to charge the rechargeable battery
Orange colored LED is off or blinking
å
å
If you insert the fully discharged battery to charge it, do not turn on
the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more
than 10 minutes before using the camera.
Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger
is inserted, the camera power may be turned off because the
rechargeable battery is discharged again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Power Source
When using the battery, please keep the following guidelines.
Failure to do so may cause the generation of heat, fire, or
explosion.
Guidelines of disposal
Ɣ Do not throw away the over used battery.
Ɣ Destruction by fire is not allowed for disposal of battery.
Ɣ The disposal instruction may differ depending on the nation or
the specific region. Please follow the given method of disposal.
Ɣ If you find the battery shape distorted in size, try to contact a
service center. It may present physical dangers.
Ɣ Use only the recommended battery charger.
Ɣ Do not place the product close to the fire device.
Ɣ Do not insert the product into the microwave oven.
Ɣ Do not place the product inside a car during the summer.
Ɣ Do not place the product in a space with hot temperature and
high humidity range.
Guideline of recharging the battery
Ɣ Do not recharge the battery by using the different method other
than the user manual indicates. Failure to following the right
instruction may cause the fire or the explosion.
Ɣ Do not use the product for long time in the carpet, comforter, or
electronic mattress.
Ɣ Do not leave the product turned on where the air cannot be circu-
lated.
Ɣ Be careful about the battery slot not to be connected with
accessories like necklace, coin, key, watch, and so on.
Ɣ Use the 2nd Advanced Lithium Batteries with the guarantee
under the manufacturing company.
Ɣ Do not try to disassemble or perforate the product by using the
sharp pin.
Ɣ Do not give a hard pressure on the product.
Ɣ Do not let the product fall down from the height, or do not give a
shock to the product.
Ɣ Do not exposure the product to the high temperature over 60°C
(140°F) degree.
Ɣ Do not exposure the product to the water or humidity.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Power Source
Inserting the memory card
Ê Insert the battery as shown
ÊInsert the memory card as shown.
- If the camera does not turn on
after you have inserted battery,
please check whether the
- Turn off the camera’s power
before inserting the memory card.
- Have the front of the memory
card facing toward the back of
the camera (LCD monitor) and
the card pins toward the front of
the camera (Lens).
battery (+ / -) direction is right.
- When the battery chamber
cover is opened, do not force
the battery chamber cover,
this may damage it.
- Do not insert the memory card
the wrong way round. Doing so
may damage the memory card
slot.
Ê There are 4 indicators for battery condition that are displayed on
the LCD monitor.
Battery
indicator
Low battery
capacity
Battery The battery is (Prepare to
Low battery
capacity
(Prepare to
Battery empty.
(Recharge
status
fully charged recharge or
use spare
recharge or or use spare
use spare
battery)
battery)
battery)
Ä When using the camera and the battery in a place that is excessively
cold or hot, the battery status on the LCD may be different from the
actual battery status.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
å Be sure to format the memory card (see p.61) if you are using
a newly purchased memory card for the first time, if it contains
data that the camera cannot recognize, or if it contains images
captured with a different camera.
å Turn off the camera power whenever the memory card is being
inserted or removed.
å If the memory card is subjected to any of the following, the
recorded data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed
while recording, deleting (formatting) or reading.
å Samsung cannot be held responsible for lost data.
å Repeated use of the memory card will eventually reduce the
memory card’s performance. Should this be the case, you will
need to purchase a new memory card. Wear and tear on the
memory card is not covered by the Samsung warranty.
å The memory card is an electronic precision device. Do not bend,
drop or subject the memory card to any heavy impact.
å Do not store the memory card in an environment with strong
electronic or magnetic fields, e.g. near loud speakers or TV
receivers.
å
It is advisable to copy important data onto other media as back-up
e.g. floppy disks, hard disks, CD etc.
å If there is insufficient memory available :
A [Memory Full] message will appear and the camera will not
operate. To optimize the amount of memory in the camera,
replace the memory card or delete unnecessary images stored
on the memory card.
å
Don't remove the memory card when the camera status lamp is
blinking as this may cause damage to data in the memory card.
å Please do not use or store in an environment where there are
extremes in temperature.
å Do not allow the memory card to become dirty or to come into
contact with any liquid. Should this happen, clean the memory
card with a soft cloth.
å Please keep the memory card in its case when not in use.
å During and after periods of extended use, you may notice that the
memory card is warm. This is perfectly normal.
å Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card
using this camera.
å Do not use a memory card formatted by another digital camera or
memory card reader.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
When using a 1GB microSDTM memory, the specified shooting capacity
will be as follows. These figures are approximate as image capacities can
be affected by variables such as subject matter and memory card type.
Ê Memory cards you can use
You can use microSDTM (Secure Digital) memory cards.
Recorded
image size
Super
Fine
Fine
Normal 60 FPS 30 FPS 15 FPS
About
About
129
About
240
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
292
About
154
About
255
About
321
About
183
About
291
About
367
Still
image
About
232
About
391
About
510
About
412
About
583
About
824
About
600
About
802
About
965
About
1584
About
1765
About
1993
-
-
About
About
-
-
-
-
-
-
-
-
-
-
-
-
00:12'49" 00:23'23"
About About
00:14'27" 00:26'04"
About About
00:25'00" 00:48'02"
About About
*Movie
clip
-
About
00:50'54" 01:13'27" 01:34'20"
å
å
å
The Zoom W/T lever doesn’t function during the movie recording.
The recording times can be changed by the zoom operation.
Several videos were recorded in succession to determine the total
recording time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the camera for the first time
Ê Charge the rechargeable battery fully before using the camera for
Ê Setting up the Time Zone
the first time.
Time Zone
1. Select the [Time Zone] menu by
pressing the Up/Down button and
press the Right button.
2. Press the Left/Right button to select
the desired mode.
Ê When the camera is turned on for the first time, a menu will be
displayed on the LCD monitor to set date, time, time zone and
language. This menu will not be displayed again after setting up
the date, time, time zone and language. Set up the date, time,
time zone and language before using this camera.
London
[GMT +00:00] 2010/01/01 01:00 PM
Back
DST
Ä For more information about the World Time, refer to the page 62.
Ê Setting up the language
Language
English
1. Select the [Language] menu by
pressing the Up/Down button and press
the Right button.
2. Select the desired sub menu by
pressing the Up/Down button and press
the OK button.
Date & Time
Time Zone
䚐ạ㛨
Français
Ê Setting up the date, time and date type
Deutsch
Español
Italiano
1. Select the [Date&Time] menu by
pressing the Up/Down button and
press the Right button.
Language
:English
Date & Time
:10/01/01
on
yyyy mm dd
Back
Set
2010
/
01
/
01 13:00
Off
2. Select the desired sub menu by
pressing the Up/Down/Left/Right
button and press the OK button.
Back
Set
Left/Right button : Selects world time/year/month/day/hour/
minute/date type
Up/Down button : Changes the value of each item.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor indicator
Ê
The LCD monitor displays information about the shooting functions
No.
5
Description
Battery
Icons
Page
p.15
and selections.
6
Photo Size / Movie Size
p.40
7
8
Image Quality / Frame Rate
Metering
p.40
p.48
p.34
p.36
p.32
9
Flash
10
11
Self-timer
Macro
Face Detection /
Without Sound
12
13
14
p.43/54
p.62
Date / Time
2010/01/01 01:00 PM
Optical / Digital Zoom bar /
Digital Zoom rate
p.30
15 Camera shake Warning
p.28
p.47
p.52
p.51
16
17
18
[Image & Full Status]
Auto Focus Frame
OIS
No.
1
Description
Recording mode
Voice Memo
Icons
Page
p.21
Drive mode
Smart Filter / Image Adjust
/ Photo Style Selector
p.49/50
/48
19
2
p.52
p.17
p.17
-
20
21
ISO
p.41
p.42
p.41
p.25
Number of available shots
remaining
00001
3
4
White Balance
Remaining time
00:00:00
22 Exposure compensation
23 Aperture Value / Shutter Speed
Memory card icon /
Internal memory icon
F3.5, 1/30
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
Photo Size
Shooting
Sound
Quality
EV
ISO
Display
White Balance
Settings
Face Detection
Smart FR Edit
Change
Exit
2. Use the up or down button to navigate through the menus.
Photo Size
Volume
Press the
Up or Down
button.
Shooting
Sound
Shooting
Sound
Quality
Start Sound
Shutter Sound
Beep Sound
AF Sound
EV
ISO
Display
Display
Settings
White Balance
Settings
Face Detection
Smart FR Edit
Change
Exit
Exit
Change
3. Use the left or right button to select a sub menu.
Volume
:Medium
Volume
Off
Volume
Press the
Left or Right
button.
Press the
Left or Right
button.
Shooting
Sound
Start Sound
Shutter Sound
Beep Sound
AF Sound
Start Sound
Shutter Sound
Beep Sound
:Off
:1
Start Sound
Shutter Sound
Beep Sound
Low
Medium
High
Display
Settings
:1
AF Sound
:On
AF Sound
:On
Exit
Change
Exit
Back
Back
Set
4. Select a submenu and click the OK button to save settings and return to the previous window.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
Selecting modes
How to use Smart Auto mode (
)
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
You can select the shooting modes by
using the MODE button on the back of your
camera.
1. Insert the battery (p.15). Insert the
battery taking note of the polarity
(+ / -).
2. Insert the memory card (p.15).
As this camera has a 27MB internal
memory, you do not need to insert the
memory card. If the memory card is
not inserted, an image will be stored on the internal memory.
If the memory card is inserted, an image will be stored on the
memory card.
Ê How to use the MODE button
1. Press the MODE button and a menu
will be displayed.
2. Select a desired mode by pressing the
Up / Down button and then press the
Smart Auto
Program
DUAL IS
Scene
Movie
3. Close the battery chamber cover.
OK button.
This mode recognizes the scene automatically.
4. Press the POWER button to turn on the camera.
5. Select Smart Auto mode by pressing the MODE or Smart button.
6. The camera selects a scene automatically. An appropriate
mode icon will appear at the top left of the screen.
7. Press the Shutter button to capture an image.
å If the auto focus frame turns to red when you press the shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is unable to
capture an image clearly.
å
Avoid obstructing the lens or the flash when you capture an image.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
å If the camera does not recognize a proper scene mode, the
default settings will be used.
[Macro]
(
(
(
) : When shooting close-ups
[Macro Text]
[Tripod]
) : When shooting texts in a close focus
å Even if there is a face detected, the camera may not select a
portrait mode depending on the subject’s position or lighting.
å The camera may not select the correct scene depending on
shooting environments, such as camera shake, lighting, and
distance to the subject.
å The [Night] mode recognizes scenes only when the flash is set
to off. The camera operates the [Tripod] mode after checking
the shooting condition on the tripod for a certain time.
å Despite using a tripod, the camera may not select a tripod
mode depending on the subject’s movement.
) : When shooting a subject that doesn’t
move for a certain time after the camera is
mounted on the tripod (available only when
the camera recognizes it as nighttime)
[Action]
(
(
) : When shooting a subject making
frequent movements
[Fireworks]
) : When shooting fireworks (available
only when using the tripod)
[Sunset Sky]
[Blue Sky]
(
(
(
) : When shooting sunset
) : When shooting blue sky
Each scene is recognized in the following conditions;
[Landscape]
[White]
(
(
(
(
) : When shooting outdoor scenes
) : When shooting a white background
) : When shooting the nighttime scenes
[Natural Green]
) : When shooting nature such as forest
and leaves
[Nights]
[Macro Color]
(
(
) : When shooting close-up shot for the
subject with various colors
[Night Portrait]
) : When shooting people in a dark outdoor
place
[Macro Portrait]
) : When shooting close-up portrait shot
[Backlight]
(
) : When shooting a backlit scenery without
a portrait
[Backlight Portrait](
[Portrait]
) : When shooting a backlit portrait
) : When shooting a portrait
(
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
How to use the Program mode (
)
How to use the DUAL IS (Dual Image Stabilization) mode (
)
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
This mode will reduce the effect of camera shake and help you get
a well-exposed image in dim conditions.
1. Select the DUAL IS mode by using the
MODE button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
1. Select the Program mode by using the
MODE button. (p.21)
2. Press the Menu button to configure
advanced functions.
3. Press the Shutter button to capture an
image.
See p.38 for further details.
Ê Things to watch out for using the DUAL IS mode
1. The digital zoom will not operate in the DUAL IS mode.
2. If the lighting conditions are brighter than fluorescent lighting
conditions, the DUAL IS will not activate.
3. If the lighting condition is darker than in fluorescent lighting
conditions, camera shake warning indicator ( Ã ) will display.
For best results only take pictures in situations where the
camera shake warning indicator ( Ã ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. As the DUAL IS uses the camera’s digital signal processor, it
may take a little longer for the camera to process and save the
images.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
The scene modes are listed below.
How to use the Scene modes (
)
[Beauty Shot]
(
) : Take a photo of a person with options to
hide facial imperfections
Use the menu to easily configure optimal settings for a variety of
shooting situations.
[Frame Guide]
(
) : Use this mode when you want someone
else to take a picture for you from the
1. Select the Scene mode by using the
MODE button. (p.21)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
angle you choose.
[Night]
(
) : Use this for shooting still images at
night or in other dark conditions.
3. Press the shutter button to capture an
image.
[Portrait]
(
(
) : To take a picture of a person.
[Children]
) : To take a picture of fast moving
objects, for example, children.
[Landscape]
[Close Up]
(
(
) : To take pictures of distant scenery.
) : Close-up shooting for small objects
such as plants and insects.
[Text]
(
(
(
(
) : Use this mode to shoot a document.
) : For taking pictures of sunsets.
) : Daybreak scenes.
[Sunset]
[Dawn]
[Backlight]
) : Portrait without shadows caused by
backlight.
[Firework]
(
) : Firework scenes.
[Beach&Snow] (
) : For ocean, lake, beach and snowscape
scenes.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
Ŷ How to use the [Frame Guide] mode
Ŷ How to use the [Long Time Shutter] mode
This camera automatically adjusts the shutter speed and aperture
values to the shooting environment. However, in Night scene
mode, you can set the shutter speed and aperture values to your
preference.
Set [Frame Guide] mode when you want someone else to take a
picture for you from the angle you choose.
1. Take a picture from the angle you
choose.
- A guide appears round the sides of
the picture.
Changing the Shutter speed and Aperture value
1. Select the [Night] mode. (p.21)
AUTO
AUTO
2. Press the Fn button and Long Time
shutter menu will be displayed.
Cancel Frame: OK
Guide
Long Time Shutter
3. Configure the Long Time shutter
value with the 5 function button.
4. Press the Fn button again. The value
you set will be saved and the mode
will switch to Night scene mode.
2. Then another person can take the
picture by aligning the edge of the
picture to be taken with the guide
framing the sides of the window.
Exit
Move
Cancel Frame: OK
Cancel Frame: OK
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
How to use the Movie clip mode (
)
Recording HD (High Definition) movie clips
A movie clip can be recorded for as long as the available recording
time (maximum of 20 minutes) of the memory capacity allows.
You can record HD (High Definition) movie clips. (1280X720HQ, 30 fps)
H.264(MPEG4.AVC) is a standard for the digital video codec.
It supports a high quality movie clip in a small file size.
1. Select the Movie mode by using the
MODE button. (The Movie clip mode
icon and available recording time will
display on the LCD monitor.)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
1. Select the Movie mode by using the
MODE button. (p.21)
1280 X 720 HQ
2. Press the MENU button to set the
resolution to [1280 X 720 HQ].
3. Press the Shutter button to record
video for the available recording time.
Back
Move
3. Press the Shutter button once and movie clips are recorded for
up to 20 minutes. Movie clips will still be recorded if the shutter
button is released. If you wish to stop recording, press the shutter
button again.
å What is H.264(MPEG4 part10/AVC)?
With its high-compression rate and the small file size, it is a
standard for the digital video codec. It supports the recording
functions in a high resolution.
Ä Movie clip size and type are listed below.
- Movie clip size
:
1280x720HQ, 1280x720, 640x480, 320x240
(Selectable) (1280x720HQ are the settings
for recording high-quality videos.)
- Movie clip file type : MP4 (H.264)
- Frame Rate
: 60 FPS, 30 FPS, 15 FPS (Selectable)
- The frame rate can be selected when the following image size
is selected.
1280x720HQ, 1280x720, 640x480: 30 FPS, 15 FPS selectable
320x240: 60 FPS, 30 FPS, 15 FPS selectable
- If the recording time is takes longer 20 minutes, the recording is
stopped and then saved.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the recording mode
Recording the movie clip without sound
Pausing while recording a movie clip (Successive Recording)
You can record the movie clip without sound.
This camera allows you to temporarily stop during unwanted
scenes, while recording a movie clip. Using this function, you can
record your favorite scenes into a movie clip without having to
create multiple movie clips.
Steps from 1 -3 are the same as those for
MOVIE mode.
4. Press the Menu button.
5. Press the Up / Down button to select
the [Movie] menu and press the Right
button.
Ê Using Successive Recording
Steps from 1-2 are the same as those
for MOVIE CLIP mode.
6. Select the [Voice] menu by pressing the Up / Down button and
press the OK button.
7. Select the [Off] menu by pressing the Left / Right button.
8. Press the OK button. You can record a movie without sound.
3. Press the shutter button and movie
clips are recorded for as long as the
available recording time. (maximum
of 20 minutes) Movie clips will still
Stop
Pause
Ä See p.54 for further details.
be recorded if the shutter button is
released.
4. Press the OK button to pause recording.
5. Press the OK button again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Things to Watch Out for When Taking Pictures
å Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery
charge. Press the shutter button all way down to take the picture.
å Under certain conditions the auto focus system may not perform
as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is
very bright.
- When the subject matter has only horizontal lines or the subject
is very narrow (such as a stick or flagpole).
- When the surroundings are dark.
[Press the shutter button]
[Lightly press the shutter button]
å The available memory capacity may vary depending on shooting
conditions and camera settings.
å When the Flash Off, Slow synchro mode or DUAL IS mode is
selected in a low lighting condition, the camera shake warning
indicator ( Ã ) may appear on the LCD monitor. In this case, use
a tripod, support the camera on a solid surface or change to flash
shot mode.
å
Shooting against the light : Please do not take pictures against the
sun. Doing so may make the picture dark.
To take a picture against the light, please
use the [Backlight] in scene shooting mode
(see page 24), fill-in flash (see page 35),
spot metering (see page 48), exposure
compensation (see page 41) or ACB (see
page 51) function.
å
Avoid obstructing the lens or the flash when you capture an image.
å Compose the image by using the LCD monitor.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the camera buttons to set the camera
SHUTTER button
Used for taking an image or recording voice in the Recording mode.
The recording mode function can be set up by using the camera buttons.
å In MOVIE CLIP mode
POWER button
Pressing the shutter button down
fully starts the process for recording
a movie clip. Press the shutter button
once and the movie clip is recorded
for as long as the available recording
time in the memory allows. If you wish
to stop recording, press the shutter
button again.
Used for turning the camera’s power
on / off. If there is no operation during
the specified time, the camera's power
will be turned off automatically to save
battery life. Refer to page 63 for more
information about the auto power off
function.
å In Still image mode
Pressing the shutter button down halfway activates the autofo-
cus and checks the condition of the flash. Pressing the shutter
button down fully takes and stores the image. If you select voice
memo recording, the recording will start after the camera has
finished storing the image data.
Smart button
You can use the Smart button at the top
of your camera to select the correct smart
mode.
Ä See p.55 for further details.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom W/T Lever
When the menu window is not displayed,
this lever is used to control the optical or
digital zoom.
This camera has a 5X optical zoom and
a 5X digital zoom function. Using both
will offer a total zoom ratio of 25X.
Ê WIDE Zoom
Optical zoom WIDE : Move the Zoom W/T lever to the left in
optical zoom mode to see subjects in the
distance. Continue to move the Zoom W/T
lever to the left to disable optical zoom.
Ê TELE Zoom
Optical zoom TELE : Move the Zoom W/T lever to the right to
see the subject closer.
Digital zoom TELE : Move the Zoom W/T lever to the right once
again in optical 5x zoom mode to enable
digital zoom (software tele). Stop moving
the Zoom W/T lever to stop the operation of
digital zoom (tele). In digital 5x zoom mode,
digital zoom is disabled even if you operate
the Zoom W/T lever.
[TELE zoom]
[Optical zoom 2X]
[WIDE zoom]
Digital zoom WIDE : Move the Zoom W/T lever to the left
in digital zoom mode to enable digital
Optical zoom
zoom (software wide). Stop moving the
Zoom W/T lever to stop the operation of
digital zoom. Continue to move the Zoom
Digital zoom
W/T lever to the left when digital zoom is
disabled to disable optical zoom (optical
tele).
[TELE zoom]
[Digital zoom 5.0X]
[WIDE zoom]
[Digital zoom 5.0X]
[TELE zoom]
[WIDE zoom]
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom W/T Lever
Info (DISP) / Up button
å Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
å You may notice a decrease in image quality when using the digital
zoom.
While the menu is showing, the Up button operates as a direction button.
In the recording modes or playback mode, pressing this button will
display the image information.
å To view a clearer digital zoom image, press the shutter button
halfway at the maximum optical zoom position and move the
ZOOM W/T lever to the right again.
å The digital zoom can’t be activated in some Scene modes (Beauty
Shot, Night, Portrait, Children, Close Up, Text, Fireworks), movie
mode, Smart Auto mode and Smart Movie mode.
å Take care not to touch the lens to avoid taking an unclear image
and possibly causing camera malfunction. If the image is dim, turn
the camera power off and on again to modify the lens position.
å Take care not to press the lens as this may cause a camera
malfunction.
[Filming screen]
[Information screen]
å
When the camera is turned on, take care not to touch the camera’s
moving lens parts as this may cause the resulting image to be dim
and unclear.
å Take care not to touch the lens while operating the Zoom W/T
lever.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Macro
/ Down button
Ê Types of focus mode and focus range (W : Wide, T : Tele)
While the menu is showing, the Down button operates as a direction
(Unit: cm)
button. When the menu is not showing, you can use the Macro (
/ Down button to take macro pictures.
)
Mode
Program (
)
The distance ranges are shown below. Press the Macro button until
the desired macro mode indicator appears on the LCD monitor.
Focus Type
Macro (
)
Normal
W : 10 ~ 80
T : 50 ~ 80
W : 80 ~ Infinity
T : 80 ~ Infinity
Focus range
Mode
DUAL IS (
)
)
Focus Type
Auto Macro (
Normal
W : 10 ~ Infinity
T : 50 ~ Infinity
W : 80 ~ Infinity
T : 80 ~ Infinity
Focus range
[Auto Focus]
[Macro (
)]
å When the macro mode is selected, be particularly careful to avoid
camera shake.
å When you take a picture within 40cm (Wide zoom) or 50cm
(Tele zoom) in the Macro mode, select the Flash off mode.
[Auto Macro (
)]
32
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Macro
/ Down button
Focus lock
Ê Available focusing method, by recording mode
To focus on a subject not positioned in the center of the picture,
use the focus lock function.
( o : Selectable,
: Infinity focus range)
Mode
Auto Macro
o
Macro
o
Normal
o
Ê Using the Focus Lock
1. Ensure the subject is in the center of the autofocus frame.
2. Press the shutter button halfway. When the green auto focus
frame lights up, it means the camera is focused on the subject.
Be careful not to press the shutter button all the way down to
avoid taking an unwanted picture.
3. With the shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press
the shutter button completely to take the picture. If you release
your finger from the shutter button, the focus lock function will be
cancelled.
o
o
SCENE
Macro
Mode
Auto Macro
Normal
o
o
o
o
o
o
1. The image to be
captured.
2. Press the shutter
button halfway and
focus on the subject.
3. Recompose the
picture and fully
depress the shutter
button.
o
o
o
o
o
o
33
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Flash
/ Left button
When the menu is displayed on the LCD
monitor, pressing the Left button makes
the cursor shift to the left tab.
When the menu is not displayed on the
LCD monitor, the Left button operates as
the Flash ( ) button.
If you press the shutter button after selecting the flash, the first
flash fires to check the shooting condition (Flash range and
Power ratio of flash). Do not move the camera until the second
flash fires.
å
å
å
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
[Selecting the Auto flash]
å
The camera flash does not operate in the [Movie] and some
Scene modes.
Ê Selecting the flash mode
å
å
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the flash light reflecting off atmospheric dust.
1. Select the desired Recording mode, except for the [Movie]
mode. (p.21)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
å
(Unit: m)
Auto macro
WIDE TELE
Ê Flash range
Normal
WIDE TELE
Macro
WIDE TELE
ISO
AUTO 0.8~3.5 0.8~2.1 0.2~0.8 0.5~0.8 0.2~3.5 0.5~2.1
34
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Flash
/ Left button
Ê Available flash mode, by recording mode
Ê Flash mode indicator
( o : Selectable)
Icon
Flash mode
Description
Mode
If the subject or background is dark, the
camera flash will operate automatically.
Auto flash
o
o
o
o
o
o
o
o
If a subject or background is dark, the
Auto & Red eye camera flash will work automatically and will
reduction
reduce the red-eye effect by using the red-
eye reduction function.
SCENE
Mode
The flash fires regardless of the available light.
The intensity of the flash will be automatically
controlled to suit the prevailing conditions.
Fill in flash
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In
poor lighting conditions the camera shake
warning indicator ( Ã ) will display on the
LCD monitor.
o
Slow synchro
o
o
When a shot with "red eye" is detected,
Red-eye reduction this mode will reduce the red-eye effect
automatically.
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image in
poorly lit conditions, the camera shake
Flash off
o
warning indicator (
Ã
) will appear on the
o
LCD monitor.
o
å
Smart Auto flash (
) icon will appear in [Smart Auto]
mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Self-timer
/ Right button
When the menu is displayed on the LCD monitor, pressing the Right
button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the Right
Ê Selecting the self-timer
1. Select a Recording mode with the
exception of Voice recording mode.
(p.21)
button operates as the Self-timer (
) button. This function is used
when the photographer would also like to be in the image.
2. Press the SELF-TIMER / RIGHT (
)
button until the desired mode indicator
displays on the LCD monitor. A 10
second, 2 second, Double self-timer
or Motion timer icon appears on the
LCD monitor.
3. When you press the shutter button,
the picture will be taken after the
specified time has elapsed.
å If you operate the Self-timer button during the self-timer
operation, the self-timer function is cancelled.
å Use a tripod to prevent the camera from shaking.
å In Movie Clip mode, only the 10SEC self-timer will work.
[Selecting the 10 SEC
self-timer]
Ê Self-timer mode indicator
Icon
Mode
Description
10SEC
Pressing the shutter button will allow an interval
self-timer of 10 seconds before the image is taken.
2SEC Pressing the shutter button will allow an interval
self-timer of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
Double
taken. When using the flash, the 2-second
self-timer
self-timer may be delayed for longer than 2
seconds depending on the flash charging time.
The camera detects the subject's movement 6
Motion
seconds after pressing the Shutter button, and the
Timer
picture is taken when the movement is stopped.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Self-timer
/ Right button
In the following cases, the Motion Timer may not operate.
Ê Motion Timer
å The focus distance is over 3m.
å The exposure is too bright or dark
å In backlight conditions.
Motion
Icon & Self-timer lamp
Blink (1 second interval)
The detection range of
Motion Timer
Pressing the Shuter button after
setting the Motion Timer
å The movement is insignificant
Detecting the subject's movement Blink (0.25 second interval)
å
The movement is detected beyond
the center part (50%) of the sensor
where the movement is recognized.
Turn on and the image is taken
No movement is detected
after 2 seconds
å If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn’t sense stillness
after sensing movement
Ê The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer à Pressing the Shutter button Ã
Confirming the composition (Within 6 sec.)*1 Ã Starting the
detection (Swing your hands fully)*2 Ã Stopping the detection
(Do not move) Ã Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU button
Shooting (
)
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- The menu screen is available in the [Smart Auto], [Program],
[DUAL IS], [Scene], [Movie] and [Smart Movie] modes, but it is not
available in the voice recording function.
Use the menu that enables the functions, or the Fn button, to bring
up the menus below:
Available mode
Page
Mode
Menu
Photo Size / Movie Size
p.40
Photo Size
Quality / Frame Rate
p.40
Shooting
Sound
Quality
EV
ISO
Display
EV
ISO
p.41
p.41
p.42
White Balance
Settings
Face Detection
Smart FR Edit
Change
[Pressing the MENU button]
Exit
White Balance
[Menu off]
[Menu on]
Face Detection
Smart FR Edit
p.43
p.46
Face Tone
(Shooting)
OK button
- When the menu is displayed on the LCD monitor, this button is
p.47
p.47
Face Retouch
used for shifting the cursor to the sub menu or for confirming data.
Focus Area
Photo Size
Quality
Photo Size
Quality
Shooting
Sound
[Pressing the
OK button]
Metering
Photo Style Selector
Smart Filter
p.48
p.48
p.49
p.50
p.51
EV
EV
ISO
Display
ISO
White Balance
White Balance
Face Detection
Settings
Face Detection
Smart FR Edit
Change
Smart FR Edit
Exit
Exit
Back
Image Adjust
ACB
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
3. Select a desired menu by pressing the Up / Down button and
then press the OK button.
Available mode
Page
p.51
Mode
Menu
Drive
Photo Size
Quality
Photo Size
Quality
OIS
p.52
EV
EV
ISO
ISO
Up / Down
button
White Balance
Face Detection
White Balance
Face Detection
(
Shooting)
Voice
p.52
p.25
Smart FR Edit
Smart FR Edit
Exit
Back
Exit
Back
Long Time Shutter
4. Select a desired menu by pressing the Left / Right button and
then press the OK button.
Photo Size
4272 X 2848
How to Enable Functions Using the MENU Button
1. Press the MENU button in an available mode.
2. Press the Up / Down button to select the [Shooting] menu and
press the Right/OK button.
Left / Right
button
Back
Move
Back
Move
Photo Size
Quality
Photo Size
Quality
Use the Fn button on the rear of the camera to bring up the
menus that enable frequently used functions faster.
Shooting
Sound
EV
EV
ISO
Display
ISO
Right/OK
button
White Balance
White Balance
Face Detection
Settings
Face Detection
Smart FR Edit
Change
Smart FR Edit
Exit
Exit
Back
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Quality / Frame rate
Photo Size / Movie Size
You can select the compression ratio appropriate for your application
of the captured images. The higher the compression ratio, the lower
the picture quality.
You can select the photo size / movie size appropriate for your application.
(Unit: pixel)
Still image mode
Mode
Icon
Still image mode
Movie clip mode
Icon
4320X 4272X 4272X 3264X 2592X 2048X 1024X
Size
3240
2848
2403
2448
1944
1536
768
Sub
menu
Super
Fine
jpeg
Normal 60 FPS 30 FPS 15 FPS
Fine
Movie clip mode
File
Format
jpeg
jpeg
avi
avi
avi
Icon
Size
1280X720HQ
1280X720
640X480
320X240
Quality
Frame Rate
Photo Size
Movie Size
Back
Move
Back
Move
[ Still image mode ]
[ Movie clip mode ]
Back
Move
Back
Move
[ Still image mode ]
[ Movie clip mode ]
å
å
This file format complies with the DCF (Design rule for Camera
File system).
JPEG (Joint Photographic Experts Group) :
åThe higher the resolution, the lower the number of shots
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
available because high resolution images require more memory.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
ISO
Exposure compensation
This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value
by using the [EV] menu.
You can select the ISO sensitivity when taking pictures.The speed or
specific light-sensitivity of a camera is rated by ISO numbers.
[Auto] : The camera's sensitivity is
automatically changed by
Ê Compensating Exposure
1. Click the Up/Down button from the
variables such as lighting value
ISO
or subject brightness.
Shooting menu to select [EV] (
).
EV
[ISO 80, 100, 200, 400, 800, 1600, 3200] :
You can increase the shutter speed while
2. Use the Left and Right buttons to set
the desired exposure compensation
factor.
Back
Move
the same amount of light is present, by increasing the ISO sensitivity.
However, the image may be saturated in high luminance. The higher
the ISO value, the higher the camera’s sensitivity to light and therefore
the greater its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO value increases,
making the image appear coarse.
Back
Move
3. Press the OK button. The value you
set will be saved and the Exposure Compensation setup mode
will be closed. If you change the exposure value, the exposure
indicator (
) will be displayed on the Left of the LCD monitor.
Ä A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not
get good pictures.
Ä When [Motion Capture] is set, ISO speed will be set to Auto.
Ä [ISO] is enabled only in [Program] mode.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Using the Custom White Balance
White balance
White balance settings may vary slightly depending on the
shooting environment. You can select the most appropriate
white balance setting for a given shooting environment by setting
up the custom white balance.
The white balance control allows you to
adjust the colors to appear more natural.
White Balance
1. Select the Custom (
) menu of the
Back
Move
White Balance and place a sheet of
white paper in front of the camera
so that the LCD monitor shows only
white.
Mode
Icon
Description
The camera automatically selects the
Auto WB
appropriate white balance settings, depending
on the prevailing lighting conditions.
White paper
2. OK button
: selects previous
custom white balance.
Shutter button : saves new custom white balance.
Daylight
Cloudy
For taking images outside.
- The custom white balance value will be applied, starting with
the next picture you take.
- The user configured white balance will be remain effective
until it is overwritten.
For taking images under a cloudy and
overcast sky.
For shooting under daylight fluorescent
types of three-way fluorescent lighting.
Fluorescent_H
Fluorescent_L
Tungsten
Shooting under white fluorescent lighting.
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting condition.
Custom Set
Ä Different lighting conditions may cause a color cast on your images.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
å This function can detect up to 10 persons.
å When the camera recognizes many people at the same
time, it will focus on the nearest person.
Face Detection
If you use face detection options, your
camera can detect a human face. When
focusing on a human face, the brightness
of the face is also adjusted. You can also
capture natural facial expressions by using
self portrait, smile shot or blink detection.
å
The Digital zoom is not activated in this mode.
å When the camera detects a target face, the white color
focus frame will be displayed over the target face and the
grey color focus frame appears over the remaining faces.
Press the shutter button halfway down to focus on the face
and the white focus frame turns green.
Face Detection
Back
Move
å In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the
face is hidden.
- When the person being taken does not look at the camera.
- Camera doesn't detect a face as the brightness is too dark
or too bright.
- The distance between the camera and object is far.
å The maximum available Face Detection range is 2.5m (Wide).
å The nearer the subject, the faster the camera can recognize
the subject.
å In [Beauty Shot], [Portrait], and [Children] mode, the
[Face Detection] function setting is set to its default value.
Ê Normal
This mode detects the face position of the subject automatically
and then sets the focus and exposure. Select this mode for quick
and easy face picture.
Ä Selectable modes: Program, DUAL IS, Beauty Shot, Portrait,
Children, Beach & Snow
1. The size and position of the auto
focus frame is set at the face of the
subject automatically.
2. Press the shutter button halfway.
The focus frame turns to green
when the focus is activated.
3. Press the shutter button fully to take
a picture.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Blink Detection
Ê Self Portrait
Ä Selectable modes: Program, Portrait, Children, Beach & Snow
When taking pictures of yourself, the area of your face is
automatically detected so that you can take self pictures more
easily and quickly.
If the eyes of the subject are closed
when the shutter button is pressed,
the camera takes 2 continuous shots
and then the images are saved. The
camera takes only one picture if the
eyes of the subject are open when the
Shutter button is pressed.
Ä Selectable modes: Program, DUAL IS, Beauty Shot, Portrait,
Beach & Snow
1. For self-filming, set the camera lens
towards the face of the object. It
automatically detects the face of the
object, and emits a guiding sound.
å Detecting the smiling face or the blinking eyes may not be
available if any of the following situations occurs:
- If the subject is wearing sunglasses.
2. Start filming by pressing the shutter
button.
- When the subject is not facing directly to the camera.
- If the environmental light is too bright or too dark to detect
the face of the subject.
- When the camera is far from the subject. (Orange colored
focusing mark)
å When locating the face in the center of the screen, it repeatedly
emits a faster sound unlike the sounds that are emitted when
the face is not in the center.
Ê Smile Shot
-
If there is reflection of the light or the back light that are too bright.
Ä Selectable modes: Program, DUAL IS, Beauty Shot, Portrait,
Children, Beach & Snow
The camera automatically takes a
picture by detecting the face of the
subject although you don’t press the
shutter button. If you press the Shutter
button, the picture is taken in the
normal way. When taking a picture of
smile shot, showing teeth or keeping
the smiley face of your subject helps
detecting the smile face of the subject.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Smart Face Recognition
å The same person can be recognized as a different person and
vice versa depending on glasses, brightness, extreme change
of pose or facial expressions.
å If you register a new face when 12 faces are already registered,
the 12th face with the lowest priority is switched with the newly
added face.
Ä Selectable modes: Program, Beauty Shot, Portrait, Children,
Beach & Snow
The camera automatically registers
faces that you frequently photograph.
This feature will automatically prioritize
the focus on those faces and favorite
faces. This feature is available only
when you use a memory card.
å A maximum of 10 people can be registered in a scene.
å
Categorizing pictures is available in the playback mode according
to the priority of faces (p. 70).
å Even though a face is recognized, it may not be categorized in
the Smart Album according to the priority.
The nearest face appears in a white
focus frame and the rest of the faces
appear in gray focus frames.
-
-
:
Indicate favorite faces (To register
favorite faces, see page 46).
: Indicate faces that the camera
automatically registers.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
å You can register up to 8 favorite faces.
å The flash option will be set to Off.
Smart FR Edit
å If you register the same face twice, you can delete one of the
faces in the face list.
You can register frequently shot faces
or edit the registered face list prior to
shooting. This feature is available only
when you use a memory card.
Smart FR Edit
Back
Ê Face List
Move
You can change the ranking of your favorite faces or delete them.
Face List
1. Press the Fn button.
Ê My Star
You can register your favorite faces to prioritize the focus and
exposure on those faces.
1. Align your subject’s face with the
oval guideline and press [Shutter] to
register the face.
- If the subject’s face is not aligned
with the oval guideline, the white
frame will not appear.
Back
Edit
Face List
2. Select a desired menu by pressing
the Up / Down button and then press
the OK button.
Edit Ranking
Delete My Star
Cancel
Back
Set
- You can take photos of a subject’s
face directly from the front, to the left side, to the right side,
from above, or from below.
Back
Set
[Edit Ranking] : Change the rankings of people registered as
My Star.
- Take photos of one person at a time when registering faces.
[Delete My Star] : Delete people from My Star.
2. Press the OK button to save after taking photos of the face.
3. Press the MENU button when the registered face list appears.
- Your favorite faces are indicated with a (
) on the face list.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Face Tone
Auto Focus type
This menu allows you to control the skin tone in images in beauty
shot mode. The higher the level you select, the brighter the skin tone.
You can select your preferred Focus Area
according to the shooting conditions.
Focus Area
1. Select [Face Tone] by pressing the
Face Tone
Up/Down button.
2. Select a desired face tone by pressing
the Left / Right button and then press
the OK button.
3. Press the Shutter button to take an
image.
Back
Move
[Center AF] (
[Multi AF] (
)
: The rectangular area in the center of the LCD
monitor will be focused
: This camera selects all of available AF point
from the 9 AF points.
Back
Move
)
[Tracking AF] (
): The focus moves along with the movements
of a subject.
Face Retouch
Ä When the camera focuses on the subject, the auto focus frame
turns to green. When the camera doesn't focus on the subject,
the auto focus frame turns to red.
This menu allows you to make skin appear clear and beautiful
before recording in beauty shot mode. The higher the level selected,
the more effective the control.
1. Select [Face Retouch] by pressing the
Up/Down button.
2. Select a desired face retouch by
Face Retouch
pressing the Left / Right button and
then press the OK button.
3. Press the Shutter button to take an
Back
Move
image.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Metering
Photo Style Selector
If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
You can add various effects to the image
without using image editing software.
Photo Style Selector
[Multi] (
) : Exposure will be calculated
based on an average of
the available light in the
image area. However, the
calculation will be biased
towards the center of the
image area. This is suitable
for general use.
Metering
Back
Move
1. Select the desired Photo style selector by pressing the Left/Right
button and press the OK button.
2. Press the Shutter button to take an image.
Back
Move
Style mode
Normal
Sketch
Defog
Icon
Description
No style effect is applied.
[Spot] (
) : Only the rectangular area in the center of the LCD
monitor will be metered for light. This is suitable when
the subject in the center is exposed correctly, regard-
less of the back lighting.
Sketchy style is applied.
Distinct style is applied.
Soft style is applied.
[Center-weighted] (
)
Soft
: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the center of the
image area. This is suitable for taking a picture of
small object like a flower or insects.
Vivid
Vivid style is applied.
Forest
Forest style is applied.
Retro
Sepia style is applied.
Cool
Cool style is applied.
Ä If the subject is not the center of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.
Calm
Calm style is applied.
Classic
Negative
Custom RGB
Black & white effect is applied.
Negative effect is applied.
Define an RGB tone to create your own photo style.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Custom RGB : You can change the R
(Red), G (Green) and
B (Blue) values of the
image.
Smart Filter
Apply various filter effects to your photos
to create unique images.
Back
Move
Smart Filter
Back
- Up/Down button : Selects R, G, B
- Left/Right button : Changes the values
Move
1. Select the desired Smart Filter by pressing the Left/Right button
and press the OK button.
2. Press the Shutter button to take an image.
Back
Move
Smart Filter
Normal
Icon
Description
No effect
å When picture style is set, face detection is not available.
Make a photo of a life-size location or object
look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene
seem much smaller than it actually is.
å
When Photo Style Selector is set, Image Adjust function is not
available.
Miniature
Apply the retro-looking colors, high contrast,
and strong vignette effect
Vignetting
Fish-eye 1
Fish-eye 2
Distort close objects to imitate the visual effect
of a fisheye lens.
Blacken the edges of the frame and distort objects
to imitate the visual effect of a fisheye lens.
å When you apply a smart filter effect while recording a video, the
video will be automatically resized to (640x320) or smaller.
å
If you use this function, you cannot set the photo style and image
adjustment options.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Saturation
Image Adjust
You can change the saturation of the image.
Ê Contrast
You can change the contrast of the image.
1. Select [Saturation] by pressing the
Up/Down button.
1. Select [Contrast] by pressing the
Up/Down button.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
2. Change the saturation by pressing
Image Adjust
Contrast
Sharpness
Saturation
Back
the Left/Right button.
3. Press the Shutter button to take an
image.
Image Adjust
Contrast
Sharpness
Saturation
Back
Move
Move
å When Photo Style Selector is set, image adjust is not available.
å When Image Adjust is set, Face Detection mode is not available.
Ê Sharpness
You can adjust the sharpness of the
picture you are about to take.
You cannot check the sharpness effect
on the LCD monitor before you take a
picture, because this function is applied
only when the captured image is stored
on the memory.
Image Adjust
Contrast
Sharpness
Saturation
Back
Move
1. Select [Sharpness] by pressing the Up/Down button.
2. Change the Sharpness by pressing the Left/Right button.
3. Press the Shutter button to take an image.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Drive mode
ACB
You can select single, continuous, motion capture, and AEB (Auto
Exposure Bracketing).
This function is to adjust the contrast
automatically when taking photos in an
environment with big exposure difference i.e.
backlight or contrast. This function adjusts
the brightness automatically and allows the
subject to be photographed clearly.
[Single] (
)
:
Take one picture only.
ACB
[Continuous] (
) : Images will be
taken continuously
until the shutter
Back
Move
button is released.
: This takes 6 shots
per second, when
Drive
Back
[Motion Capture] (
)
Move
- [ACB] Sub menus: [Off], [On].
the shutter is pressed and held down. After
completing the continuous shooting, images
are saved and the images play back on the
Rear LCD. The maximum number of shots is
30 and the image size is fixed as VGA.
Ä When using the [Program] mode, the ACB function will operate.
[AEB] (
)
:
Take three pictures in a series in different
exposures: standard exposure (0.0EV),
short exposure (-1/2EV) and over exposure
(+1/2EV).
å High resolution and picture quality increases file saving time,
which increases stand-by time.
å
If the [Continuous], [Motion Capture], [AEB] sub menu is selected,
the flash will be off automatically.
å If less than 3 pictures are available on the memory, the AEB
shooting is not available.
å It is best to use a tripod for the AEB shooting as the time to save
each image file is longer and blurring caused by camera shake
may occur.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
OIS (Optical image Stabilization)
Voice Memo
This feature allows you to minimize camera shake while taking a
picture.
You can add your voice-over to a stored
still image. (Max. 10 sec.)
Memo
- [OIS] Sub menus: [Off], [On]
OIS
Back
Move
-
If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
Back
Move
å OIS function may not work sufficiently in the following cases.
- To take pictures of a moving subject.
- To take pictures with higher digital zoom values.
- When camera shake is beyond the camera-shake correction range.
- When the shutter speed is slow.
- Press the shutter button and take a
picture. The picture is stored on the
memory card.
Ɣ When you use the OIS function after mounting your camera on a
tripod, the vibration of the OIS sensor may cause image shake. In
this case, it is recommended to turn the OIS function off.
- Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the shutter button
will stop the voice memo.
Ɣ When you capture an image after shock is given to the camera, the
LCD screen may shake. In this case, turn the camera off and then
on for proper operation.
Stop
Ɣ When the battery is too low (
), the OIS function will not work.
Ɣ When the shooting speed exceeds 1 second, the timer function is
selected or the battery is low, the OIS icon will turn gray and the
OIS function will not work.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Ê Pausing while recording a voice
Voice Recording
Using this function, you can record your
favorite voice clips into a voice recording
file without having to create multiple voice
recording files.
A voice can be recorded for as long as the
available recording time (Max.10 hours)
allows.
Record
Stop
Record
[Voice recording mode]
Back
Move
1. Press the OK button to pause recording.
2. Press the OK button again to resume the recording.
3. If you wish to stop recording, press the shutter button again.
Press the shutter button to record a voice.
- Press the shutter button once and voice
is recorded for as long as the available
recording time (Max.10 hours) allows.
The recording time will be displayed
on the LCD monitor. Voice will still be
recorded if the shutter button is released.
å
å
å
A distance of 25cm between you and the camera (microphone)
is the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
The zoom sound may be recorded if you use the zoom while
recording a video.
Record
Exit
[Voice recording mode]
- If you wish to stop recording, press the
shutter button again.
- File type : *.wav
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting (
)
Setting movie recording
Recording the movie clip without voice
You can record the movie without voice.
You can set the desired voice recording mode in Movie mode.
- [Voice] sub menus
Select [Off] of [Voice] menu in the Movie
Off
[Off]
: Record a video without
sound.
clip mode. (
) icon will appear on the
On
LCD monitor. Press the Shutter button
and a movie will record for as long as the
memory capacity allows without voice.
[On]
: Record a video with
sound.
Back
Move
[Zoom Mute] : Record a video without
sound while zooming.
Back
Move
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart mode
Smart mode display
Ŷ Smart mode
Ŷ The LCD monitor displays information about the current Smart mode
setting.
Smart mode allows users to take a photo simply, without setting any of
the more complex functions available. Even beginners can easily learn
how to operate it.
[Smart Auto mode]
[Smart Movie Clip mode]
Ŷ You can use the Smart button at the
top of the camera to start Smart mode.
[Image & Full Status]
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart mode display
Starting Smart mode
Selecting modes
No.
1
Description
Icons
Page
p.55
Ê Mode selection using the Smart button
Recording mode
You can use the Smart button at the top of your camera to select the
correct smart mode.
Number of available
shots remaining
00001
2
p.17
Remaining time
00:00:00
Memory card icon /
Internal memory icon
3
4
-
Battery
p.15
[Smart Auto mode]
[Program mode]
5
Photo Size / Movie Size
p.40
6
7
Frame rate
Flash
p.40
p.35
p.36
p.62
p.30
p.47
p.52
8
Self-timer
9
Date / Time
Optical Zoom bar
Auto Focus Frame
OIS
2010/01/01 01:00 PM
10
11
12
[Movie Clip mode]
[Smart Movie Clip mode]
å [Frame Rate] is enabled only in [Smart Movie] mode.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Smart mode
How to use Smart Auto mode (
)
How to use Smart Movie Clip mode (
)
Ê The camera automatically chooses the appropriate camera
settings based on a detected type of scene. It will be helpful if
you are not familiar with the camera settings for various scenes.
Ê This mode allows users to record a movie clip simply, without
setting any of the more complex functions available.
1. Use the Smart button to select Smart
Movie Clip mode.
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the shutter button once and
movie clips are recorded for as long
as the available recording time allows. Movie clips will still be
recorded if the shutter button is released. If you wish to stop
recording, press the shutter button again.
1. Select Smart Auto mode by pressing
the MODE or Smart button
2. The camera selects a scene automatically.
An appropriate mode icon will appear at
the top left of the screen.
3. Press the Shutter button to capture an
image.
å
See p.21 for further details.
Each scene is recognized in the following conditions;
[Landscape]
[Sunset Sky]
[Blue Sky]
(
(
(
(
) : When shooting outdoor scenes
) : When shooting sunset
) : When shooting blue sky
[Natural Green]
) : When shooting nature such as forest
and leaves
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
In this mode, you can set up sound settings. You can use the setup
menu in all camera modes, except Voice Recording mode.
Shutter sound
Volume
:Medium
You can select the shutter sound.
- Shutter sound : [Off], [1]*, [2], [3]
Ê The items indicated by * are default settings.
Start Sound
:Off
Ä Menus are subject to change without prior notice.
Shutter Sound
Off
Beep Sound
AF Sound
1
2
3
(
)
Sound
Back
Set
Volume
You can select a volume of start up sound, shutter sound, beep
sound and AF sound.
Volume
-
[Volume] sub menus : [Off], [Low],
[Medium]*, [High]
Off
Beep sound
Start Sound
Low
Medium
Shutter Sound
High
If you set sound to ON, a beep will sound when buttons are
pressed, letting you know the camera operation status.
Beep Sound
AF Sound
:On
Volume
:Medium
Back
Set
- [Beep Sound] sub menus : [Off], [1]*, [2], [3]
Start Sound
:Off
Shutter Sound
Off
Start up sound
Beep Sound
AF Sound
1
2
3
You can select the sound that is activated whenever the camera is
turned on.
Back
Set
Volume
:Medium
- Start up sound : [Off]*, [1], [2], [3]
Start Sound
Off
Shutter Sound
1
2
3
Beep Sound
AF Sound
Back
Set
58
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Setup menu
Sound
AF sound
In this mode, you can set up basic settings. You can use the setup
menu in all camera modes, except Voice Recording mode.
If you set AF sound to on, AF sound will be activated when the
Shutter button is pressed down half way so that you can be aware
of the camera operation status.
Ê The items indicated by * are default settings.
Ä Menus are subject to change without prior notice.
Volume
:Medium
- [AF sound] sub menus : [Off], [On]*
Start Sound
:Off
:1
Display (
)
Shutter Sound
Beep Sound
AF Sound
:1
Off
On
Language
There is a choice of language that can be
displayed on the LCD monitor. Even if the
battery is removed and inserted again,
the language setting will be preserved.
Back
Set
Language
English
Function Description
Start Image
䚐ạ㛨
Français
Deutsch
Display Brightness
Quick View
Español
Italiano
Power Save
Back
Set
Function Description
You can select whether the function description can be displayed
on the window in recording mode.
Language
:English
- Function Description sub menus
[Off] : The function description
function can’t be activated.
[On]* : The name and description of the
option is displayed.
Function Description
Start Image
Off
On
Display Brightness
Quick View
:Auto
:0.5sec
:Off
Power Save
Back
Set
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Display (
)
Start up image
Quick view
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus : [Off]*, [Logo], [User Image]
Language
:English
:On
Function Description
Start Image
- Use a saved image for the start-up
image with the [Start Image] in the
[Resize] menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
ꢀ
Display Brightness
Quick View
- Sub menus
OF
F
Language
:English
[Off]
: The quick view function can’
t be activated.
Power Save
Function Description
Start Image
:On
:Off
ꢁ
Exit
Back
[0.5 sec]*, [1 sec], [3 sec]
: The captured image is
Off
Display Brightness
Quick View
- The User images will be deleted by
[Reset] menu.
0.5 sec
1 sec
Power Save
briefly displayed during the
selected time.
3 sec
Set
Back
Display Save
Display Brightness
You can adjust the LCD brightness.
If you set the [Power Save] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
Language
:English
- Sub menus : [Auto]*, [Dark],
[Normal], [Bright]
Function Description
Start Image
:On
:Off
Auto
Display Brightness
Quick View
- Sub menus
Dark
[Off]* : The LCD monitor will not be turned off.
Language
:English
Normal
Power Save
Bright
Function Description
Start Image
:On
:Off
[On] : If the camera isn't operated
during the specified time (about
30 SEC.), the camera power will
be idle (Camera status lamp:
Blinking) automatically.
Back
Set
Display Brightness
Quick View
:Auto
:0.5sec
Off
On
Power Save
Back
Set
Ä You can’t set the [Power Save] menu of Playback Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
(
)
Settings
Formatting a memory
Initialization
This is used for formatting the memory. If you run [Format] on the
memory, all images, including the protected images, will be deleted.
Be sure to download important images to your PC before formatting
the memory.
All camera menu and function settings will be restored to their
default values. However, values for Date & Time, Language and,
Video Out will not be changed.
- Sub menus
- Sub menus
[Yes] : A window for confirming the
[Yes] : A window to confirm the
Format
Reset
selection will be displayed.
Yes
Format
Yes
Date & Time
No
selection displays. Select the [Yes]
Select the [Yes] menu and
all settings will be restored
to their defaults.
Reset
No
Time Zone
File No.
:London
:Series
Date & Time
:Off
menu. A [Formatting] message
appears and the memory will be
formatted. A [Format is completed]
message appears and formatting is
finished.
Time Zone
File No.
:London
:Series
Imprint
:Off
Auto Power Off
:3 min
Imprint
:Off
[No]* : Settings will not be restored to
their defaults.
Back
Set
Auto Power Off
:3 min
Back
Set
[No]* : The memory will not be formatted.
Ê Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can't recognize or one
that has been taken from another camera.
- Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras,
memory card readers, or PCs, you will get a [Card Error]
message.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Settings
File name
Setting up the Date / Time / Date type
You can change the date and time that will be displayed on the
captured images and set up the date type. Setting [Time Zone]
enables you to display the local date and time on the LCD monitor
when travelling overseas.
This function allows the user to select the file naming format.
[Reset] : After using the reset function,
Format
Reset
the next file name will be set
Date & Time
from 0001 even after formatting,
Time Zone
:Off
:London
Format
-
Date type : [yyyy/mm/dd], [mm/dd/yyyy],
[dd/mm/yyyy], [Off]*
deleting all or inserting a new
memory card.
File No.
Reset
Reset
Imprint
Date & Time
:Off
Series
Auto Power Off
:3 min
yyyy mm dd
n
Off
Back
Set
[Series]* : New files are named using
2010
/
01
/
01
13:00
Imprint
:Off
numbers that follow the previous sequence, even when
a new memory card is used, or after formatting, or after
deleting all pictures.
Auto Power Off
:3 min
Back
Set
- The first stored folder name is 100PHOTO, and the first file
name is SAM_0001.
Time Zone
- File names are assigned sequentially from SAM_0001 Ã
SAM_0002 Ã ~ Ã SAM_9999.
Ê Available cities:
Time Zone
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Sao Paulo, Newfoundland,
Caracas, La Paz, NewYork, Miami,
Chicago, Dallas, Denver, Phoenix, LA,
San Francisco, Alaska, Honolulu, Hawaii,
Samoa, Midway, Wellington, Auckland,
Okhotsk, Guam, Sydney, Darwin, Adelaide, Seoul, Tokyo, Beijing,
Hong Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai,
New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens,
Helsinki, Rome, Paris, Berlin
- The folder number is assigned sequentially from 100 to 999 as
follows: 100PHOTO Ã 101PHOTO Ã ~ Ã 999PHOTO.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design
rule for Camera File systems) format. If you change the image
file name, the image may not play back.
London
[GMT +00:00] 2010/01/01 01:00 PM
Back
DST
Ä DST : Daylight Saving Time
62
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Settings
Imprinting the recording date
Auto power off
There is an option to include Date & Time on still images.
- Sub menus
This function switches the camera off after a set amount of time in
order to prevent unnecessary battery drainage.
[Off]*
: The Date & Time will not be
imprinted on the image file.
: Only the Date will be
Format
- Sub menus
Reset
[Off]
: The power off function will not
operate.
Format
Date & Time
:Off
[Date]
Reset
Time Zone
File No.
:
Off
Date
Date & Time
Off
imprinted on the image file.
[1 min], [3 min]*, [5 min], [10 min]
: The power will turn off
Time Zone
File No.
1 min
Imprint
[Date & Time] : The Date & Time will be
Date & Time
:
3 min
Auto Power Off
5 min
Imprint
imprinted on the image file.
Back
Set
automatically if not used for the
period of time specified.
10 min
Auto Power Off
Back
Set
Ä The Date & Time are imprinted at the bottom right side of the still
image.
Ä The imprint function is applied only to still images.
Ä Depending on the manufacturer and print mode, the date printed
on an image may not be printed correctly.
-
After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a
voice recording and playing back a movie clip.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Settings
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland,
Germany, U.K., Holland, Italy, Kuwait, Malaysia, New
Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway etc.
Selecting Video out type
The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.
- When using a TV as an external monitor, you will need to select
the external or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When the camera is connected to an external monitor, some parts
of the image may not be displayed.
Ê Connecting to an external monitor
Video Out
AF Lamp
USB
NTSC
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.
PAL
:Computer
:On
PC Software
Back
Set
- When the camera is connected to an external monitor, the menu
will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.
Yellow - Video
White - Sound
64
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Settings
Setting the USB
Auto Focus lamp
If the camera is failed to automatic connection with a PC or a printer
using a USB cable, you can manually set [Computer] or [Printer].
You can turn on and off the Auto Focus lamp.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]* : The AF lamp will light up in low
light conditions.
Video Out
AF Lamp
USB
:NTSC
-[USB] sub menus:
Off
On
:On
[Computer]* : Sets computer connection
PC Software
Video Out
AF Lamp
USB
:NTSC
:On
mode if the connected
external device cannot be
recognized automatically.
: Sets printer connection
mode if the connected
Computer
PC Software
Printer
Select Mode
Back
Set
[Printer]
Back
Set
external device cannot be
recognized automatically.
[Select Mode] : Select a USB mode when
you connect your camera
to another device.
PC Software
Set Intelli-studio to start automatically when you connect your
camera to your computer.
Video Out
:NTSC
:On
- [PC Software] sub menus : [Off], [On]*
AF Lamp
USB
:Computer
:On
PC Software
Off
On
Back
Set
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
Turn the camera on and select Play mode by pressing the play
mode button ( Î ). The camera can now play back the images
stored on the memory.
If the memory card is inserted in the camera, all the camera
functions apply only to the memory card.
Playing back a movie clip
1. Select the recorded movie clip that
you want to play back by using the
Left/Right button.
2. Press the OK button to play back a
movie clip file.
If the memory card is not inserted in the camera, all the camera
functions apply only to the internal memory.
Play
Capture
- To pause a movie clip file while playing
it back, press the OK button again.
- Pressing the OK button again will
cause the movie clip file to restart.
Playing back a still image
1. Select the Play mode by pressing
the play mode button ( Î ).
-
To rewind the movie clip while it is
playing, press the Left button. To
fast forward the movie clip, press
the Right button.
- To stop playback of the movie clip, press the OK button, and
then press the Left or Right button.
2. The last image stored on the
memory is displayed on the
LCD monitor.
3. Select an image that you want to
view by pressing the Left/ Right
button.
Ä Press and hold the Left or Right
button to play back the images
quickly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
Playing back a recorded voice
Movie clip capture function
You can capture still images from the movie clip.
1. Select the recorded voice that you
want to play back by using the Left/
Right button.
2. Press the OK button to play back a
recorded voice file.
- To pause a recorded voice file, while
playing it back, press the OK button
again.
- To resume playback of the voice file, press the OK button.
- To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
Ê How to capture the movie clip
1. Press the OK button while playing the
movie clip. Then press the Down button.
2. The paused movie clip is saved as a
new file name.
Play
Play
Capture
[Paused]
Ä The captured movie clip file is the
same size as the original movie clip
(1280x720HQ, 1280x720, 640x480,
320x240).
- To stop playback of the voice memo, press the Down button.
Ä
When you press the down button at
the beginning of the movie clip, the first
frame of the movie clip will be saved
as a still image.
[Press the down button]
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting play mode
LCD monitor Indicator
The LCD monitor displays shooting information about the displayed image.
Playing back a voice memo
1. Select a still image that has the voice
memo.
2. Press the OK button to play back the
voice memo.
- To pause the voice memo, while
playing it back, press the OK button
again.
Play
- To resume playback of the voice
memo, press the OK button.
Pause
No.
1
Description
Playback mode
Voice Memo
DPOF
Icon
Page
p.66
p.85
p.86
p.83
p.62
-
2
3
4
Protect
5
Folder name & File name
Memory indicator
Battery
100-0010
6
7
p.15
p.41
8
ISO
80~3200
F3.5 ~ F5.9
9
Aperture value
Shutter speed
Flash
p.25
10
11
12
13
8 ~ 1/2,000
On/Off
p.34
p.40
p.62
Image size
4320X3240 ~ 320X240
2010/01/01
Recording date
68
Download from Www.Somanuals.com. All Manuals Search And Download.
º
í
Thumbnail (
) / Enlargement (
) Lever
Using the camera buttons to set the camera
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Smart Album
You can view multiple pictures, enlarge a selected picture, and crop
and save a selected area of an image.
Play mode button
1. Turn the Thumbnail lever to the left
when one picture is displayed to enter
the Smart Album screen.
2. Press the Left/Right button to move to
a desired image.
Ê If you have turned on the camera by
pressing the POWER button, you can
press the Play mode button once to
switch to Play mode and press it again
to switch to Recording mode.
3. Turn the Digital Zoom lever to the right
to move to the normal display screen.
Ê You can turn the power on with the Play
mode button. The camera is turned on in
play mode. Press the Play mode button
again to turn off the camera.
Turn the Thumbnail
(º) lever to the left.
Ê Manner mode: To select the Manner mode, press the Play mode
button for more than 3 seconds. In the Manner
mode, Operating sound, Effect sound, Start-up
sound and Shutter sound will not be generated. To
cancel the Manner mode, turn on the camera by
pressing the POWER button.
Turn the Digital Zoom
(í) lever to the right.
11
12
1
3
5
Filter
2010.01.01
[Highlighted image]
[Smart Album 3-Thumbnail Window]
69
Download from Www.Somanuals.com. All Manuals Search And Download.
º
í
Thumbnail (
) / Enlargement (
) Lever
Ŷ Searching or Deleting Files
Ŷ Smart Album Filter
1. Turn the Thumbnail lever to the left on
the Smart Album screen.
2. Each time you turn the Thumbnail lever
to the left, files in the relevant category
are displayed on the Smart Album
screen.
1. Press the MENU button in Smart
Album mode.
2. Selecting the desired category enables
to categorize and search the files by
using the Up/Down button.
Type
Date
Color
Week
Face
11
12
1
3
5
Back
Set
3. Select the file by pressing the Up/Down/ Left/Right buttons.
4. Press the Delete ( Õ ) button to delete the selected file.
Ŷ Details of Each Category
Category
Description
File Format
11
12
1
3
5
11
12
1
3
5
11
12
1
3
5
Filter
2010.01.01
Filter
2010.01.01
Filter
2010.01.01
Categorized depending on the file type
(e.g., picture, video, or voice)
Type
[3-Thumbnail Window]
[9-Thumbnail Window]
[20-Thumbnail Window]
Categorized depending on the sequence
of recorded dates.
Date
Color
Week
Ɣ When Smart Album feature runs or a category is selected, it
may take few seconds depends on recorded data volume.
However, it is not a malfunction please wait until Smart
Album screen appears.
Pictures,
Videos,
Voice
Categorized depending on the main color.
Categorized depending on the sequence
of recorded weeks.
Categorized depending on the faces
photographed in the Face Detection mode.
Face
Ɣ The [Face] category appears only if there are faces that were
photographed in the Face Detection mode.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
º
í
Thumbnail (
) / Enlargement (
) Lever
Ê The maximum enlargement rate in proportion to the image size
Ê Image enlargement
1. Select the picture you want to
enlarge and move the Digital Zoom
lever to the right. Then the selected
picture will be digitally enlarged.
2. Different parts of the image can be
viewed by pressing the 5 function
button.
Image size
Maximum
enlargement
rate
X13.5 X11.1 X11.1 X10.2 X8.1
X6.4
X3.2
3. Move the Thumbnail lever to the
left to return the enlarged picture to
its original size.
- You can tell whether the image
displayed is an enlarged view by
checking the image enlargement
indicator shown at the top left of the LCD monitor. (If the image
is not an enlarged view,
the indicator will not be displayed.) You can also check the
area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Ê Trimming : You can extract part of the image that you want and
save it separately.
1. Select an image that you want to
enlarge and press the enlargement
button. Press the OK button and a
Trim
Trimming?
Yes
No
message will be displayed.
2. Select a desired sub menu by
pressing the Up / Down button
and press the OK button.
Confirm
- [Yes] : The trimmed image will be saved as a new file name,
and appear on the LCD monitor.
- [No] : The trimming menu will disappear.
Ä If there is not enough memory space to save the trimmed
image, the image can’t be trimmed.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Info (DISP) / Up button
Play & Pause / OK button
When the menu is displayed on the LCD monitor, the Up button
operates as a direction button.
When the menu is not displayed on the LCD monitor, pressing the
Info button will display image information on the LCD monitor.
In Play mode, the play & pause/ OK button works as follows:
-
When the menu is displayed on the LCD monitor, the OK button
is used for confirming data that is changed by using the 5 function
button.
- If a still image with a voice memo, a voice file, or a movie clip is
playing
·In Stop mode
: Plays a still image with a voice memo, a
voice file, or a movie clip.
Info (DISP) button
·During playback : Temporarily stops playback.
·In Pause mode : Resumes playback
Info (DISP) button
Info (DISP) button
Play
Pause
Stop
Play
Stop
[ Voice recording is stopped ]
[ Voice recording is playing ]
[ Voice recording is paused ]
72
Download from Www.Somanuals.com. All Manuals Search And Download.
( Õ )
Left / Right / Down / MENU button
Delete
button
Left / Right / Down / MENU buttons activate the following.
This deletes images stored on the memory. By activating the
Recycle Bin function (p.85) you can restore deleted photos.
- Left button : While the menu is showing, the Left button
operates as a direction button. While the menu is
not showing, press the Left button to select the
previous image.
1. Select an image that you want to delete by pressing the
Left / Right button and press the Delete ( Õ ) button.
- Right button : While the menu is showing, the Right button
operates as a direction button. While the menu is
not showing, press the Right button to select the
next image.
Delete File?
Delete File?
Yes
No
Multiple Delete
Yes
No
Multiple Delete
- Down button : While the menu is showing, the Down button
operates as a direction button.
11
12
1
3
5
Set
Set
- MENU button: When you press the MENU button, the play mode
menu will be displayed on the LCD monitor. Pressing
it again will return the LCD to the initial display.
[Single Image]
[Thumbnail Image]
2. To add images to delete, select the [Multiple Delete] menu.
- Left/Right button: selects images
- OK button
Fn button
:
:
checks for deletion
deletes the selected
images.
-
Prev
Select
Next
Delete
3. Select the submenu values by pressing the Up / Down button
and then press the OK button.
- If [Yes] is selected : deletes the selected images.
- If [No] is selected : cancels "Delete Image".
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor. In the Play
Menu Tab Main Menu
Secondary
Menu
Sub Menu
Page
p.82
mode, pressing the MENU button displays the menu on the LCD monitor.
The menus you can set up in Play mode are as follows. To capture an image
after setting up the play menu, press the Play mode button or shutter button.
Interval
1, 3, 5, 10 sec
-
Off
Drops
Trip
Mist
Muse
Fall
-
Menu Tab Main Menu
Sub Menu
2592X1944
Page
Music
-
p.82
p.82
Multi Slide
Show
2048X1536
2592X1728
2560X1440
Start Image
Left 90˚
-
-
1024X768
1776X1184
1920X1080
Right 90˚
180˚
(
)
Off
Calm
Relax
Sweet
-
Resize
p.76
Effect
Shine
Lively
-
-
Rotate
p.77
p.77
Select
-
Delete
Protect
p.83
p.83
p.84
p.85
p.85
All
Select
Yes / No
Normal
Sketch
Soft
-
Defog
All
Unlock / Lock
Vivid
Forest
Photo Style
Edit
Selector
Edit Ranking
Delete My Star
-
-
-
-
-
-
Retro
Cool
(
)
Face List Edit
Recycle Bin
Voice memo
Calm
Classic
Custom RGB
Miniature
Fish-eye 1
-
Negative
Normal
Off
On
-
File
Options
Retrieve
Smart Filter
Vignetting
Fish-eye 2
Off
p.78
p.79
Off
On
(
)
ACB
Select / All /
Reset
Standard
Index
Red-eye Fix
Brightness
Saturation
Play / Repeat
All
Face Retouch
Contrast
Add Noise
-
p.86
~
p.87
Image Adjust
DPOF
Yes / No
Select / All /
Reset
Size
Start
p.81
p.81
Multi Slide
Show
-
-
Yes
No
Date
Copy to Card
p.88
Images
(
)
Select
-
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the play back function using the LCD monitor
This menu is available while the camera is connected to a PictBridge
Menu Tab Main Menu
Sub Menu
Auto
Secondary Menu Page
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
-
-
-
-
-
-
-
Plain
Photo
Fast Photo
Auto
Menu Tab Main Menu
Sub Menu
Secondary Menu Page
Type
One Photo
-
Images
p.90
All Photos
-
Auto
Postcard
Card
4X6
L
-
-
-
-
-
-
-
-
Draft
Normal
Fine
Quality
Date
p.90
-
❹
Auto
-
-
-
-
-
-
Size
Off
2L
On
Letter
A4
Auto
File Name
Reset
Off
❹
A3
-
p.90
On
Auto
Full
1
-
Yes
No
-
-
-
-
-
-
-
-
-
p.91
-
Ä
Menus are subject to change without prior notice.
2
Layout
4
8
9
16
Index
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit (
)
- A large sized image can be resized to a smaller sized image,
but not vice versa.
- Only JPEG images can be resized. Movie clip (AVI), Voice
recording (WAV) files can’t be resized.
Resize
Change the resolution (size) of pictures taken. Select [Start image]
to save an image to be the start-up image.
- You can change the resolution of only those files compressed in
the JPEG 4:2:2 format.
1. Press the play mode button and
press the MENU button.
2. Click the Up/Down button from the
Edit menu to select [Resize] (
menu tab and press the OK button.
3. Select a desired sub menu by
pressing the Left / Right button and
press the OK button.
Resize
-
The resized image will have a new file name. The [Start Image]
image is stored not on the memory card but on the internal memory.
)
- If a new user image is saved, the original user image will be
deleted.
- If the memory capacity is insufficient to store the resized image,
a [Memory Full] message will appear on the LCD monitor and
the resized image can't be stored.
Back
Move
Ê Image Resize Types
( o : Selectable)
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit (
)
Rotating an image
Photo Style Selector
It is possible to add various effects to your images by using this function.
You can rotate the stored images by various degrees.
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the Edit
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the Edit
menu to select [Rotate] ( ò ) menu tab
and press the OK button.
Rotate
Photo Style Selector
menu to select [Photo Style Selector]
(
) menu tab and press the OK
button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Back
Move
Back
Move
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Style mode
Normal
Sketch
Defog
Icon
Description
No style effect is applied.
Right 90˚
Left 90˚
180˚
Sketchy style is applied.
Distinct style is applied.
Soft style is applied.
Back
Move
Back
Move
Back
Move
[
: Right 90˚]
[
: Left 90˚]
ô
ó
[
: 180˚]
õ
Soft
: Rotate picture in a
: Rotate picture in a
: Rotate picture 180
clock-wise direction
counter-clock-wise direction
degrees
Vivid
Vivid style is applied.
Forest
Forest style is applied.
Sepia style is applied.
Cool style is applied.
If you display the rotated image on the LCD monitor, empty
spaces may appear to the left and right of the image.
Retro
Cool
Calm
Calm style is applied.
Black & white effect is applied.
Negative effect is applied.
Classic
Negative
Custom RGB
Define an RGB tone to create your own photo style.
4. The changed image is saved as a new file name.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Edit (
)
Ê Custom RGB
You can change the R (Red), G (Green)
and B (Blue) values of the image.
Smart Filter
Apply various filter effects to your photos to create unique images.
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the
Back
Move
Edit menu to select [Smart Filter]
Smart Filter
- OK button : Select / setup the Custom
Color
- Up / Down button : Selects R, G, B
- Left / Right button : Change the values
(
) menu tab and press the OK
button.
Back
Move
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Back
Move
Smart Filter
Normal
Icon
Description
No effect
Make a photo of a life-size location or object
look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene
seem much smaller than it actually is.
Miniature
Apply the retro-looking colors, high contrast,
and strong vignette effect
Vignetting
Fish-eye 1
Fish-eye 2
Distort close objects to imitate the visual effect
of a fisheye lens.
Blacken the edges of the frame and distort objects
to imitate the visual effect of a fisheye lens.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit (
)
Ê Face Retouch
Image Adjust
You can make the skin in an image appear clear and beautiful.
1. Press the play back button and press the MENU button.
2. Click the Up/Down button from the Edit menu to select
[Image Adjust] (
1. Select (
) by pressing the
) menu tab and press the OK button.
Left/Right button and press the OK
button. Then a bar for selecting the
face retouch will be displayed.
Face Retouch
Ê ACB
2. Change the face retouch by pressing
the Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
You can automatically adjust the brightness of the dark area,
caused by under exposure to the light source.
Back
Move
1. Select (
) by pressing the Left/
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as a
new file name.
ACB
Ê Brightness control
Back
Move
You can change the brightness of the image.
1. Select ( ) by pressing the
Left/Right button and press the OK
button. Then a bar for selecting the
brightness will be displayed.
Ê Red eye Removal
Brightness
Red eye effect can be removed from the captured image.
2. Change the brightness by pressing
the Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
1. Select ( ) by pressing the Left/
!
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as
a new file name.
Back
Move
Red-eye Fix
Back
Move
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit (
)
Ê Contrast control
Ê Noise effect
You can change the contrast of the image.
You can add noise to an image to add a more classic feel to
your photo.
1. Select ( y ) by pressing the Left/Right
button and press the OK button. Then
a bar for selecting the contrast will be
displayed.
2. Change the contrast by pressing the
Left/Right button.
1. Select (
) by pressing the
Contrast
Left/Right button and press the OK
button.
Add Noise
2. The [Making New Image] message is
displayed and the image is saved as
a new file name.
Back
Move
3. Press the OK button and the image
will be saved as a new file name.
Back
Move
Ê Saturation control
You can change the saturation of the image.
1. Select (
) by pressing the Left/
Right button and press the OK button.
Then a bar for selecting the saturation
will be displayed.
Saturation
2. Change the saturation by pressing the
Left/Right button.
Back
Move
3. Press the OK button and the image
will be saved as a new file name.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Starting the Multi Slide Show
Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
Selecting Images
You can select image to view
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [Multi Slide Show]
menu tab and press the OK button.
1. Use the Up / Down button to select the
[Images] menu and press the Right
button.
Start
Images
Interval
All
Date
Music
Effect
Select
:Off
2. Select a desired sub menu by pressing
the Up / Down button.
Start the Multi Slide Show
Back
Set
[All]
: All images saved on the
The Multi Slide Show can start only in the [Start] menu.
Memory are played back. Press the OK button to
save the configuration.
1. Use the Up / Down button to select the [Start] menu and press
the Right button.
[Date] : Images taken in a specified date are played back.
Press the OK button to save the configuration.
[Select] : Play only the selected images. The selected image
can be saved as [Select1], [Select2] and [Select3].
If you save the selected image with the [New Select]
command, it will be saved as [Select1]. But when a
new image is saved again using [New Select], the
former image which had been saved as [Select1] will
be saved as [Select2] automatically.You can change
and cancel the images which were saved as [Select1],
[Select2] and [Select3]. Press the Fn button to save
the configuration.
2. Select a desired sub menu by pressing
the Up / Down button.
Start
Play
Images
Interval
Repeat
:1 sec
[Play] : The Multi Slide Show is
closed after one cycle.
Music
Effect
:Off
:Off
[Repeat] : The Slide show is repeated
until cancelled.
Back
Set
3. Press the OK button and the slide show will be started.
- To pause the slide show while playing it back, press the OK
button again.
- Pressing the OK button again will cause the Multi Slide Show
restart.
- To stop playback of the Multi Slide Show, press the OK button,
and then press the Left or Right button.
3. Select [Play] or [Repeat] in the [Start] menu to start the multi
slide show.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
Starting the Multi Slide Show
Setting play interval
Setting Background Music
Set the Multi Slide Show music.
Set the Multi Slide Show play interval.
1. Select the [Music] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired Music.
1. Select the [Interval] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired interval.
3. Press the OK button to save the
configuration.
Start
Start
Off
Images
Interval
Images
Interval
:All
Mist
Drops
1 sec
Muse
Music
Effect
Music
Effect
3 sec
Trip
Fall
sec
5
10 sec
3. Press the OK button to save the
configuration.
Back
Set
Back
Set
å
å
The loading time depends on the image size and quality.
While the Multi Slide Show is playing, only the first frame
of a Movie file is displayed.
å
å
While the Multi Slide Show is playing, the voice recording file
will not display.
The interval menu functions in the [Off] menu only.
Configure Multi Slide show effects
Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by
Start
Off
Images
Interval
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the type of effect.
Calm
Shine
Music
Effect
Relax
Lively
Sweet
3. Press the OK button to confirm the
setting.
Back
Set
82
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
1. Press the play mode button and press the menu button.
2. Press the Up / Down button and select the [File Options] menu
tab and press the OK button.
å Of all the files stored on the memory, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important
shots should be stored on a computer before deletion takes
place. The startup image is stored on the camera's internal
memory (i.e., not on the memory card) and it will not be
deleted even if you delete all files on the memory.
Deleting images
This deletes images stored on the memory. By activating the Recycle
Bin function you can restore deleted photos.
1. Press the Up / Down button and select
the [Delete] menu tab. And then press
the Right button.
Delete
Select
Protect
All
Protecting images
Face List Edit
Recycle Bin
:Edit Ranking
:Off
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
2. Select a desired sub menu by pressing the
Up / Down button and press the OK button.
[Select] : Selection window for an image
to delete is displayed.
- Up/ Down/ Left/ Right : Select an image
- OK button : Select the image for
deletion. ( Ë mark)
Voice memo
DPOF
:Off
Copy to Card
Back
Set
1. Press the Up / Down button and
select the [Protect] menu tab. And
then press the Right button.
Delete
Protect
Select
Face List Edit
Recycle Bin
All
:Off
Voice memo
DPOF
:Off
2. Select a desired sub menu by
pressing the Up / Down button and
press the OK button.
Copy to Card
- Fn button : Press the Fn button to display
the confirmation message.
Back
Set
11
12
1
3
5
Select
Delete
[Select] : Selection window for an
image to be protected /
released is displayed.
Select the [Yes] menu and
press the OK button to delete
marked images.
- Up / Down / Left / Right : Select an
image
[All] : Displays confirmation window.
Select the [Yes] menu and press the
OK button to delete all unprotected
images. If there aren’t protected
images, all the images are deleted
Delete All File(s)?
Yes
No
11
12
1
3
5
- OK button : Protect / release the
image
Select
Set
Set
- Fn button : Your changes will be
saved and the menu will
disappear.
and a [No Image File] message will appear.
3. After deletion, the screen will be changed to the play mode screen.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
[All] : Protect / release all saved images
- If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
Face List Edit
Portrait images can be classified or deleted in the smart album
according to their ranking. This feature is available only when you
use a memory card.
Protect All?
Lock
Unlock
- An image in LOCK mode will be
protected from the delete function
or [Delete] function, but will NOT be
protected from the [Format] function.
Set
1. Press the Up / Down button to select
the [Face List Edit] menu and press
the Right/OK button.
Delete
Protect
Face List Edit
Edit Ranking
Recycle Bin
Delete My Star
Voice memo
DPOF
:Off
2. Select a desired menu by pressing the
Up / Down button and then press the
OK button.
[Edit Ranking] : The ranking of the
registered images
Copy to Card
Back
Set
Face List Edit
can be changed.
[Delete My Star]: Selected images
can be deleted from
Back
Set
the list.
3. Press the MENU button to switch to
the Playback mode.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
Recycle Bin
Voice memo
You can activate the [Recycle Bin] function or restore photos saved in
the recycle bin. By turning on this function, you can temporarily save
photos up to a total 27MB capacity. You can also restore photos from
the recycle bin.
You can add your voice to a stored still image.
Delete
Protect
Face List Edit
Recycle Bin
:Edit Ranking
:Off
:
Delete
Voice memo
DPOF
1. Select the [Recycle Bin] menu by
pressing the Up/Down buttons and
then press the Right button.
Off
On
Protect
Copy to Card
Face List Edit
Recycle Bin
:Edit Ranking
Start
Stop
Back
Set
Off
On
Voice memo
DPOF
[Voice memo menu]
[Ready for recording]
[Voice is recording]
2. Select a desired sub menu by pressing
the Up/Down buttons and press the
OK button.
Retrieve
Copy to Card
Back
Set
- Press the shutter button to record up to 10 seconds of voice into
a stored still image.
[Off]
[On]
: Do not want to use the Recycle Bin function.
: Deleted photos are saved in the Recycle folder.
- To stop the recording, press the shutter button.
[Retrieve] : You can restore the deleted photos from the Recycle
folder.
3. Press the OK button to save the changed setting.
å The Recycle Bin function only works with photos.
å When you delete all files at once, the files are not saved in
the Recycle Bin. When the Recycle bin is full of space, it
removes photos in sequence from the first deleted photo.
å Although you turn off the Recycle function, the Recycle bin
still keeps the photos.
å When you format the built-in/external memory, all photos in
the Recycle Bin are deleted.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
DPOF
Ê Standard
This function allows you to embed printing quantity information on
a stored image.
Ê
Ê
DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the
pictures to be printed and how many prints to make.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Delete
Protect
Select Image
The DPOF indicator will display on the LCD monitor when an image
that has DPOF information plays back. Images can then be printed
on DPOF printers, or at an increasing number of photo labs.
Fa
dit Ranking
Select
Re
ard
All
Vo
DPOF
2. Press the Right button again and
[Standard] sub menu will display.
Reset
Size
Copy to Card
Ê This function is not available for Movie clips and Voice recording files.
Back
Set
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select] : Selection window for an
image to print is displayed.
- Up / Down / Left / Right : Select an
image to print.
Ê When the wide angle image is printed as a wide angle print,
8% of the left and right side of the image may not be printed.
Check that your printer can support the wide angle image when
you print the image. When you print the image at a photo lab,
request that the image is printed as a wide angle image. (Some
photo labs may not support the wide angle size print.)
11
12
1
3
5
Quantity
Set
- Zoom W/T Lever : Select the number of
prints.
[All] : Configure number of prints for all
pictures except movie and voice
files.
01
- Up / Down button : Select a number of
prints
Quantity
Set
[Reset] : Cancel the print setup.
4. Press the OK button to confirm the setting. If an image carries
DPOF instruction, the DPOF indicator ( ) will show.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
Ê Index
Ê Print size
Images (except for movie clips and voice files) are printed as
index type.
You can specify the print size when printing images stored on the
memory card. The [Size] menu is available only for DPOF 1.1
compatible printers.
1. Press the Up / Down button and select
Delete
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Protect
Delete
Ranking
the [DPOF] menu tab. And then press
the Right button.
Protect
Setting Index?
Select Image
Yes
No
F
Edit Ranking
d
Select
DPOF
2. Select the [Index] menu and press
the Right button again. Sub menu will
display.
R
dard
All
Size
2. Select the [Size] menu and press the
Right button again. Sub menu will
display.
V
DPOF
x
Reset
Copy to Card
Size
Back
Set
Copy to Card
Back
Set
3. Select a desired sub menu by pressing the Up / Down button.
If [Yes] is selected : The image will be printed in index format.
If [No] is selected : Cancel the index print setting.
3. Select a desired sub menu by pressing
the Up / Down button and press the
OK button.
4. Press the OK button to confirm the setting.
[Select] : Selection window to change
the printed size of the image
is displayed.
11
12
Size
1
3
5
Set
- Up / Down / Left / Right : Select an image.
- Zoom W/T Lever : Change the print size.
- Fn button : Your changes will be
saved and the menu will
3X5
disappear.
[All] : Change print size of all saved
images.
Size
Set
- Up / Down button : Select a print size
- OK button : Confirm the changed setting.
[Reset] : Cancel all of the print size settings.
Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
å
Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
File Options
Copy to Card
å
å
If there is not enough space available on the memory card to
copy saved images on the internal memory (About 27MB), the
[Copy to Card] command will copy only some of the images and
display [Memory Full] message. Then the system will return to
the playback mode. Please be sure to delete any unnecessary
files to free up space before inserting the memory card into the
camera.
When you move the images that are stored on the internal
memory by doing [Copy to Card] to the card, the next number
of file names will be created on the card to avoid duplication of
the file name.
- When the [Reset] of the [File No.] setup menu is set : The
copied file names start from after the last stored file name.
- When the [Series] of the [File No.] setup menu is set : The
copied file names start from after the last captured file name.
After completing [Copy to Card], the last stored image of the
last copied folder is displayed on the LCD monitor.
This enables you to copy image files, movie clips and voice recording
files to the memory card.
1. Select the [Copy to Card] menu tab by
pressing the Up / Down button. And
then press the Right button.
Delete
Protect
Face List Edit
Recycle Bin
:Edit Ranking
:Off
Voice memo
DPOF
:Off
2. Select a desired sub menu by pressing
the Up / Down button and press the
OK button.
- [Yes] : All images, movie clips and voice recording files saved in
the internal memory are copied to the memory card after
the [Copying] message is displayed. After copying has
been completed, the screen will return to play mode.
- [No] : Cancels "Copy to Card".
Yes
No
Copy to Card
Back
Set
88
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge
Ê Easy printing
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
When you connect the camera to printer
in the Play back mode, you can print a
picture easily.
- Pressing the Left / Right button :
Selects a previous / next image.
- Pressing the OK button :
Currently displayed image will be
printed with the printer’s default settings.
Ê Setting up the camera for connection to the printer
1. Connect the camera and printer with USB cable.
2. Once the camera is turned on, the camera automatically recognizes
the printer and is connected to it.
Print
Menu
Ä If automatic connection fails, set the [USB] menu to [Printer].
(p.65)
Ä For a printer that can enable removable disk, set the [USB] menu
to [Printer].
Ê Connecting the Camera to a Printer
89
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge : Picture Selection
PictBridge : Print Setting
You can select images you want to print.
You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
Images
One Photo
Ê Setting the Number of Copies to Print
1. Press the MENU button and the
PictBridge menu will display.
2. Use the Up / Down button to
select the [Images] menu and
press the Right button.
Size
All Photos
1. Press the MENU button and the
Images
Size
e ho
Auto
Layout
Type
:Auto
:Auto
:Auto
PictBridge menu will display.
2. Use the Up / Down button to select
the desired menu, and then press the
Right button.
Postcard
Card
Layout
Type
Quality
4x6
L
Back
Set
2L
Quality
3. Use the Up / Down button to select a desired sub menu and
press the OK button.
- Select [One Photo] or [All Photos]. A screen where you can
set the number of copies to print will appear as shown below.
3. Use the Up / Down button to select
the desired sub menu value, and then
press the OK button.
Back
Set
Menu
Size
Function
Sub menu
Set the size of the printing
paper
Auto, Postcard, Card,
4X6, L, 2L, Letter, A4, A3
0
1
Set the number of pictures to
be printed on a sheet of paper 16, Index
Auto, Full, 1, 2, 4, 8, 9,
Layout
Type
Quantity
Set
Quantity
Set
Set the quality of the printing
paper
Auto, Plain, Photo,
Fast Photo
[When [One Photo] is selected]
[When [All Photos] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Photo] is selected : Use the Left / Right button to
select another picture. After
Set the quality of the picture
to be printed
Quality
Date
Auto, Draft, Normal, Fine
Auto, Off, On
selecting another picture, select
the number of prints for another
Set whether to print the date
Set whether to print the file
name
picture.
File Name
Auto, Off, On
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting
the number of prints.
Ä
Some menu options are not supported on all printers.
If not supported, the menus are still displayed on the LCD, but are not
selectable.
4. Press the play mode button ( Î ) and images will be printed.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge : Reset
Important notes
Initializes user-changed configurations.
Be sure to observe the following precautions!
å This unit contains precision electronic components. Do not use or
store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
1. Use the Up / Down button to select
the [Reset] menu tab. And then press
the Right button.
2. Use the Up / Down button to select
the desired sub menu, and then press
the OK button.
Date
:Auto
:Auto
File Name
Reset
No
Yes
Back
Set
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
If [Yes] is selected : All print and image settings will be reset.
If [No] is selected : Settings will not be reset.
å
Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when
not planning to use the camera for a long period of time
Ä Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that
came with your printer.
å Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the
camera unusable.
å Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the
camera with wet hands.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
å Camera Maintenance
- If you use this camera in wet places, such as beach or pool, do
not let water or sand get inside the camera. Doing so may result
in failure or may permanently damage the unit.
- Use a soft brush (available from photo stores) to gently clean the
lens and LCD assemblies. If this does not work, lens-cleaning
paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this
camera to come into contact with solvent materials such as
benzol, insecticide, thinners etc. This may damage the body
shell of the camera and also affect its performance. Rough
handling can damage the LCD monitor. Take care to avoid
damage and keep the camera in its protective carry case at all
times when not in use.
å Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic
circuitry. If this occurs, turn the camera off and wait for at least
1 hour until all moisture is dispersed. Moisture built up can also
occur on the memory card. If this happens, turn off the
camera and remove the memory card. Wait until the moisture
has dispersed.
å Do not attempt to disassemble or modify the camera.
å Caution on Using the Lens
å Under certain conditions, static electricity can cause the flash unit
to fire. This is not harmful to the camera and is not a malfunction.
- If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the
surface of the lens.
å When images are uploaded or downloaded, the data transfer may
be affected by static electricity. In this case, disconnect and re-
connect the USB cable before trying the transfer again.
å If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery and
the memory card if you do not intend using the camera for an
extended period of time.
å Before an important event or going on a trip, you should check
the camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
å If the camera is exposed to an electronic interference, it will turn
itself off to protect the memory card.
å
If the digital camera is not used for a long period, the date and time
may adopt the default settings by automatical battery discharged. In
this case, reset the date and time correctly before the recording.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
Warning indicator
å
Tempered glass is used for the camera’s LCD monitor, but excessive
shock may damage the glass. If there are any cracks in it, do not
touch them, or you may injure yourself.
There are several warnings that may appear on the LCD display.
[Card Error]
åMemory card error
à Turn off the camera power and turn it on again
à Insert the memory card again
à Insert and format the memory card (p.61)
[Memory Full]
å The memory card or internal memory is full
à Insert new memory card
à Delete the unnecessary image files
[No Image File]
åThere are no images stored on the memory
à Take images
à Insert a memory card that is holding some images
[File Error]
åFile error
à Delete the file
åMemory card error
à Contact a camera service center
[Low Battery]
åThere is low battery capacity
à Insert a charged battery or recharge the battery
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service center
Please check the following
Camera does not take images when pressing the Shutter button
åThere is insufficient memory capacity
à Delete unnecessary image files
The camera doesn’t switch on
åThere is low battery capacity
åThe memory card has not been formatted
à Format the memory card (p.61)
åThe memory card is exhausted
à Insert a charged battery or recharge the battery (p.15)
åBattery is inserted incorrectly with the polarities reversed
à Insert the battery according to the polarity marks (+, -)
à Insert a new memory card
åThe camera's power is off
The camera power ceases while in use
à Turn the camera power on
åThe battery is exhausted
åThe battery is exhausted
à Insert a charged battery or recharge the battery (p.15)
åThe Camera is turned off automatically
à Turn on the camera power again
à Insert a charged battery or recharge the battery (p.15)
åBattery is inserted incorrectly with the polarities reversed
à Insert the battery according to the polarity marks (+, -)
åOperation has ceased in a low temperature outside of the camera
usage temperature range
à Make the camera and battery warm by placing them in your
pocket, etc. and then immediately before shooting, place the
battery in the camera and then shoot
The camera suddenly stops working while in use
åThe camera stopped due to a malfunction
à Remove /re-insert battery and switch the camera on
The images are unclear
åA picture was taken of the subject without setting an appropriate
macro mode
à Select an appropriate macro mode to take a clear image
åTaking a picture beyond the flash range
à Take a picture within the flash range
åThe lens is smudged or dirty
à Clean the lens
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service center
The flash does not fire
No image on external monitor
åFlash off mode has been selected
à Dis-engage flash off mode
å The external monitor has not been connected properly with
the camera
åThe camera mode can't use the flash
à Refer to the FLASH instruction (p.34)
à Check the connection cables
åThere are incorrect files on the memory card
à Insert a memory card that has correct files
Incorrect date and time is displayed
å The date and time have been set incorrectly or the camera has
adopted the default settings
ÃReset the date and time correctly
When using the PC’s explorer, the [Removable Disk] file does not show
åCable connection is incorrect
à Check the connection
åThe camera is off
The camera buttons do not operate
åCamera malfunction
à Remove/re-insert battery and switch the camera on
à Turn the camera on
å
The operating system is not Windows XP, Vista, 7 / Mac OS 10.4.
Alternatively the PC does not support USB
à Install Windows XP, Vista, 7 / Mac OS 10.4 to PC that
supports USB
A card error has occurred while the memory card is in the camera.
åIncorrect memory card format
à Re-format the memory card (p.61)
A part of the LCD screen does not occasionally turn on or a spot appears
åAlthough the LCD screen is manufactured with high precision
technology, the precision pixels are not occasionally lighted or the
red, white and blue spots appear
The images don't play back
åIncorrect file name (Violation of DCF format)
à Do not change the image file name
ĺ
This phenomenon does not affect the quality of the recorded
image and it is not a malfunction
Color of image is different to the original scene
åWhite balance or effect setting is incorrect
à Select appropriate White balance and effect
A vertical line appears on the LCD screen when taking a picture of a
bright object
Images are too bright
åExposure is excessive
à Reset exposure compensation
åIf a subject is exposing bright lights, a gray, black, red or purple
vertical line may appear
ĺ
This is a phenomenon called smear and it does not affect the
quality of the recorded image. This is not a malfunction
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Image Sensor - Type : 1/2.3" CCD
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in
flash, Slow sync, Flash off, Red Eye Fix
- Range : Wide : 0.2m ~ 3.5m,
- Effective Pixel : Approx. 14.2 Mega-pixel
- Total Pixel : Approx. 14.48 Mega-pixel
Tele : 0.5m ~ 2.1m
- Recharging Time : Approx. 4 sec
Lens
- Focal Length : SAMSUNG Lens f = 4.9 ~ 24.5mm
(35mm film equivalent : 27 ~ 135mm)
- F No. : F3.5(W) ~ F5.9(T)
Sharpness
- Soft+, Soft, Normal, Vivid, Vivid+
- Digital Zoom : ·Still Image mode :1.0X ~ 5.0X
·Play mode : 1.0X ~ 13.5X
White Balance
- Auto, Daylight, Cloudy, Fluorescent_H,
Fluorescent_L, Tungsten, Custom
(depends on image size)
Voice Recording - Voice Recording (max. 10 hours)
- Voice Memo in Still Image (max. 10 sec.)
LCD Monitor
Focusing
- 2.7" color TFT LCD (230,000 dots)
-
Type : TTL auto focus
(Multi AF, Center AF, Tracking AF)
Date Imprinting - Date, Date & Time, Off (user selectable)
Shooting
- Still Image
- Range
·Mode : Smart Auto, Program, DUAL IS, Scene
(Beauty Shot, Frame Guide, Night,
Portrait, Children, Landscape, Close Up,
Text, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow)
Normal
Macro
Auto Macro
Wide
Tele
10cm ~ 80cm
50cm ~ 80cm
10cm ~ Infinity
50cm ~ Infinity
80cm ~ Infinity
·Smart Auto : Portrait, Night Portrait, Night,
Backlight Portrait, Backlight,
Landscape, White, Macro, Macro
Text, Tripod, Action, Sunset Sky,
Blue Sky, Natural Green, Macro
Color, Macro Portrait
Shutter
- Smart Auto : 1/8 ~ 1/2,000 sec.,
Program : 1 ~ 1/2,000 sec.,
Night : 8 ~ 1/2,000 sec.
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center-weighted
- Compensation : ±2EV (1/3EV steps)
·Shooting : Single, Continuous, Motion Capture,
AEB
- ISO : Auto, 80, 100, 200, 400, 800, 1600, 3200
·Self-timer : 10 sec., 2 sec., Double,
Motion Timer
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
- Movie Clip
- Image Size
·With Audio or without Audio
(user selectable, recording time : max 20 min.)
·
Size : 1280x720HQ (30 fps & 15 fps),
1280x720 (30 fps & 15 fps),
4320X
3240
4272X
2848
4272X
2403
3264X
2448
2592X
1944
2048X
1536
1024X
768
640x480 (30 fps & 15 fps),
- Capacity (1GB Size)
320x240 (60 fps & 30 fps & 15 fps)
Frame rate : 60 fps, 30 fps, 15 fps
·
·5X Optical Zoom and Mute in Zooming,
sound recording on/ off selectable
·Smart Movie : Landscape, Blue Sky, Natual
Green, Sunset Sky
·Smart Filter : Miniature, Vignetting, Fish-eye 1,
Fish-eye 2
Super About About About About About About About
Fine
129
About About About About About About About
240 255 291 391 583 802 1765
About About About About About About About
292 321 367 510 824 965 1993
154
183
232
412
600
1584
Fine
Normal
·Movie Editing (Embedded):
Pause during recording, Still Image Capture,
Time Trimming
Ä These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
Storage
- Media
Effect
- Effect : Photo Style Selector, Smart Filter, Image
Adjust (Sharpness, Contrast, Saturation)
·Internal memory : About 27MB flash memory
·External Memory (Optional) :
microSDTM card (up to 4 GB guaranteed)
- File Format
·Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
-
Editing : Resize, Rotate, Photo Style Selector,
Smart Filter, Image Adjust (ACB, Face
Retouch, Red Eye Fix, Brightness,
Contrast, Saturation, Add Noise)
·Movie Clip : MP4 (H.264)
·Audio : WAV
Image Play
- Type : Single image, Thumbnails, Multi slide show,
Movie Clip, Smart Album
Ä Multi slide show : Slide show with Effect & Music
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL
(user selectable)
- DC power input connector : 20 pin
Power Source
- Rechargeable battery : BP70A
Ä Included battery may vary depending on
sales region.
Dimensions (WxHxD)
Weight
- 96.3 × 55.8 × 16.6(16.1) mm
(excluding protrusions)
-
Approx. 120 g (without battery and card)
Operating Temperature - 0 ~ 40°C
Operating Humidity
Software
- 5 ~ 85%
- Intelli-studio, Adobe Reader
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer (for Windows)
å Using a self-assembled PC or a PC and OS that are not supported
may void your warranty.
For Windows users
Transfer files by connecting your camera to your PC.
å The programs may not work properly on 64-bit Edition of Windows
XP, Vista and 7.
Ê Installing programs
Hardware and software requirements
å Intelli-studio may not perform correctly on some computers, even
when the computer meets the requirements.
å If your computer does not meet the requirements, videos may not
play correctly or it may take longer to edit videos.
Item
CPU
Requirements
Intel® Pentium®4 3.2 GHz or higher
AMD Athlon™ FX 2.6 GHz or higher
å Install DirectX 9.0c or above before you use the program.
RAM
OS
512 MB or more (1 GB or more recommended)
Windows XP/Vista/7
- USB port
- CD-ROM drive
- nVIDIA Geforce 7600GT or higher
Ati X1600 series or higher
- 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
Others
- Microsoft DirectX 9.0c or later
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer (for Windows)
1. Connect your camera to your PC with the USB cable.
Ê Transferring files to your PC
Once you connect the camera to your PC, the camera will be
recognized as a removable drive.
å You must plug the end of the cable with the indicator light (Ÿ)
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
å The battery will be charged while the camera is connected to a
PC with the USB cable.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer (for Windows)
2. Turn on the camera.
- The computer recognizes the camera automatically.
Ê Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista / 7 is
similar.
å If the camera fails to connect, a pop-up window will appear.
Select Computer.
1. If the status lamp on your camera is blinking, wait until it stops.
2. Click (
screen.
) on the tool bar at the bottom right of your PC
3. On your PC, select [My Computer ĺ Removable Disk ĺ DCIM
ĺ 100PHOTO].
4. Select the files you want and drag or save them to your PC.
3. Click the pop-up message.
4. Remove the USB cable.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer (for Windows)
Ê Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
For details, select [Menu ĺ Help] in the program.
å You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
å You cannot copy files in your computer to the camera.
å Intelli-studio supports the following formats
- Videos: AVI (MJPEG), MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9)
- Photos: JPG, GIF, BMP, PNG, TIFF
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer
(for Windows)
Transferring files to your computer
(for Mac)
For Mac users
Icon
1
Description
When you connect the camera to a Macintosh computer, the
computer will recognize the device automatically. You can transfer
files directly from the camera to the computer without installing any
programs.
Open menus
2
Display files in the selected folder
Change to the Photo edit mode
Change to the Video edit mode
3
4
Ê Installing programs
Hardware and software requirements
Change to the Sharing mode (You can send files by email or
upload files to websites, such as Flickr or YouTube.)
5
Item
CPU
RAM
OS
Requirements
Power Mac G3 or later
6
7
Enlarge or reduce the thumbnails in the list
Select a file type
Minimum 256MB RAM
Mac OS 10.4 or higher
8
View files of the selected folder on your computer
Show or hide files of the connected camera
View files of the selected folder on the camera
View files as thumbnails, in Smart Album, or on a map
Browse folders in the connected device
Browse folders in your computer
9
- USB port
- CD-ROM drive
10
11
12
13
14
Others
Move to the previous or next folder
Print files, view files on a map, store files in My Folder, or
register faces
15
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring files to your computer (for Mac)
1. Connect your camera to a Macintosh computer with the USB
cable.
å You must plug the end of the cable with the indicator light (Ÿ)
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
2. Turn on the camera.
- The computer recognizes the camera automatically and a
removable disk icon will be displayed.
3. Double-click the removable disk icon.
4. Transfer photos or videos to the computer.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Please check the following if the USB connection malfunctions.
Case 6
When I open the Device Manager (by clicking Start
(Settings) Control Panel (Performance and Main-
tenance) System (Hardware) Device Manager),
there are Unknown Devices or Other Devices entries
with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Case 1
USB cable is not connected or it is not the supplied
USB cable.
à Connect the supplied USB cable.
à Right-click on the entry with the question (?) or exclamation
(!) mark and select "Remove". Restart the PC and connect
the camera again.
Case 2
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown
Devices] in Device Manager.
à Turn off the camera, remove the USB cable, plug in the
USB cable again, and then turn on the camera.
Case 7
In some security programs (Norton Anti Virus, V3,
etc.), the computer may not recognize the camera as a
removable disk.
Case 3
Case 4
There is an unexpected error during file transfer.
à Turn the camera power off and on again. Transfer the
file again.
à Stop the security programs and connect the camera to
the computer. Refer to the security program instructions
about how to temporarily disable the program.
When using the USB hub.
à There may be a problem in connecting the camera to
the PC through the USB hub if the PC and the hub are
not compatible. Wherever possible, connect the camera
to the PC directly.
Case 8
The camera is connected to the USB port located on
the front of the computer.
à When the camera is connected to the USB port located
on the front of the computer, the computer may not
recognize the camera. Connect the camera to the USB
port located on the back of the computer.
Case 5
Are other USB cables connected to the PC?
à The camera may malfunction when it is connected to
the PC at the same time as another USB cable. In this
case, disconnect the other USB cable, and connect
only one USB cable to the camera.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Ê When the movie clip doesn’t play back on the PC
Ä When the movie clip recorded by the camera doesn’t play back
on the PC, the causes are mostly due to the codec installed on
the PC.
Ê When the DirectX 9.0c or later is not installed
à Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the Microsoft website for
downloading the DirectX.
Ê
If a PC connected with the camera stops responding while Windows
is starting.
Ã
In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’t
have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct disposal of batteries in this product
Correct Disposal of This Product
Correct disposal of batteries in this product
Applicable in the European Union and other European
countries with separate battery return systems.)
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment) (Applicable in the European Union
and other European countries with separate collection
systems)
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
This Class [B] digital apparatus complies with Canadian ICES-003.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to effectively
communicate Samsung’s environmental friendly product
activities to the consumers. The mark represents
Samsung’s continuous effort on development of
environmental conscious products.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|