Samsung Digital Camera EC DV300FBPB User Guide

This user manual includes detailed usage  
instructions for your camera. Please read  
this manual thoroughly.  
Click a topic  
DV300/DV300F/DV305/DV305F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Avoid covering the camera or charger with blankets or clothes.  
Avoid interference with pacemakers.  
The camera may overheat, which may distort the camera or  
cause a fire.  
Maintain a minimum of 15 cm between this camera and all  
pacemakers to avoid potential interference, as recommended by  
the manufacturer and the independent research group, Wireless  
Technology Research. If you have any reason to suspect that your  
camera is interfering with a pacemaker or other medical device,  
turn off the camera immediately and contact the manufacturer of  
the pacemaker or medical device for guidance.  
Do not handle the power supply cord or go near the charger  
during a thunderstorm.  
This may result in electric shock.  
If liquid or foreign objects enter your camera, immediately  
disconnect all power sources, such as the battery or charger,  
and then contact a Samsung service center.  
Comply with any regulations that restrict the use of a camera in  
a certain area.  
Avoid interference with other electronic devices.  
Turn off the camera when in an aircraft. Your camera can cause  
interference with aircraft equipment. Follow all airline regulations  
and turn off your camera when directed by airline personnel.  
Turn off the camera near medical equipment. Your camera can  
interfere with medical equipment in hospitals or health care  
facilities. Follow all regulations, posted warnings, and directions  
from medical personnel.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Use the battery only for its intended purpose.  
Caution—situations that could cause damage to your camera  
or other equipment  
Misusing the battery may cause a fire or electric shock.  
Do not touch the flash while it fires.  
Remove the batteries from your camera when storing it for an  
extended period of time.  
The flash is very hot when fired and may burn your skin.  
Installed batteries may leak or corrode over time and cause  
serious damage to your camera.  
When you use the AC charger, turn off the camera before you  
disconnect the power to the AC charger.  
Failing to do so may result in fire or electric shock.  
Use only authentic, manufacturer-recommended, Lithium-ion  
replacement batteries. Do not damage or heat the battery.  
Disconnect the charger from the wall socket when not in use.  
Inauthentic, damaged, or heated batteries may cause a fire or  
personal injury.  
Failing to do so may result in fire or electric shock.  
Do not use a damaged power supply cord, plug, or loose outlet  
when you charge batteries.  
Use only Samsung-approved batteries, chargers, cables and  
accessories.  
This may cause a fire or electric shock.  
Using unauthorized batteries, chargers, cables or accessories  
can cause batteries to explode, damage your camera, or cause  
injury.  
Do not allow the AC charger to come in contact with the +/-  
terminals on the battery.  
Samsung is not responsible for damage or injuries caused by  
unapproved batteries, chargers, cables or accessories.  
This may cause a fire or electric shock.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Do not force the camera’s parts or apply pressure to the  
camera.  
Avoid interference with other electronic devices.  
Your camera emits radio frequency (RF) signals that may interfere  
with unshielded or improperly shielded electronic equipment,  
such as pacemakers, hearing aids, medical devices, and  
other electronic devices in homes or vehicles. Consult the  
manufacturers of your electronic devices to solve any interference  
problems you experience. To prevent unwanted interference, use  
only Samsung-approved devices or accessories.  
This may cause your camera to malfunction.  
Exercise caution when you connect cables or adapters and  
install batteries and memory cards.  
If you force the connectors, improperly connect cables, or  
improperly install batteries and memory cards, you can damage  
ports, connectors, and accessories.  
Use your camera in the normal position.  
Avoid contact with your camera’s internal antenna.  
Keep cards with magnetic strips away from the camera case.  
Information stored on the card may be damaged or erased.  
Data transference and your responsibilities  
Never use a damaged charger, battery, or memory card.  
Data transferred via WLAN could be leaked, so avoid  
transferring sensitive data in public areas or on open networks.  
This may result in electric shock or camera malfunction or  
cause a fire.  
The camera manufacturer is not liable for any data transfers that  
infringe on copyrights, trademarks, intellectual property laws, or  
public decency ordinances.  
Check that the camera is operating properly before use.  
The manufacturer takes no responsibility for any loss of files or  
damage that may result from camera malfunction or improper  
use.  
You must plug the small end of the USB cable into your camera.  
If the cable is reversed, it may damage your files.  
The manufacturer is not responsible for any loss of data.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Outline of the User Manual  
Copyright information  
Microsoft Windows and the Windows logo are  
registered trademarks of the Microsoft Corporation.  
Mac is a registered trademark of the Apple Corporation.  
microSD™, microSDHC™, and microSDXC™ are  
registered trademarks of the SD Association.  
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are  
registered trademarks of the Wi-Fi Alliance.  
Trademarks and trade names used in this manual are  
the property of their respective owners.  
Camera specifications or contents of this manual may  
be changed without prior notice due to upgrade of  
camera functions.  
We recommend using your camera within the country  
where you purchased.  
Use this camera responsibly and adhere to all laws  
and regulations concerning its use.  
You are not allowed to reuse or distribute any part of  
this manual without prior permission.  
For Open Source License information, refer to the  
‘OpenSourceInfo.pdf’ in the provided CD-ROM.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Subject, background, and composition  
Icons used in this manual  
Subject: The main object in a scene, such as a person,  
animal, or still life  
Icon  
Function  
Background: The objects around the subject  
Additional information  
Composition: The combination of a subject and background  
Safety warnings and precautions  
Camera buttons. For example, [Shutter] represents the  
shutter button.  
[ ]  
( )  
Background  
Page number of related information  
Composition  
The order of options or menus you must select to  
perform a step; for example: Select Face Detection  
Normal (represents Select Face Detection, and then  
select Normal).  
Subject  
*
Annotation  
Exposure (Brightness)  
The amount of light that enters your camera determines the  
exposure. You can alter the exposure by changing the shutter  
speed, aperture value, or ISO sensitivity. By altering the exposure,  
your photos will be darker or lighter.  
Expressions used in this manual  
Pressing the shutter  
Half-press [Shutter]: Press the shutter halfway down  
Press [Shutter]: Press the shutter all the way down  
Normal exposure  
Overexposure (too bright)  
S
S
Half-press [Shutter]  
Press [Shutter]  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic troubleshooting  
Learn to solve common problems by setting shooting options.  
The subject’s eyes  
appear red.  
Red eye occurs when the subject's eyes reflect light from the camera flash.  
Set the flash option to  
Red-eye or  
Red-eye Fix. (p. 64)  
If the photo has already been captured, select  
Photos have dust  
spots.  
If dust particles are present in the air, you may capture them in photos when you use the flash.  
Turn off the flash or avoid capturing photos in a dusty place.  
Photos are blurred.  
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.  
Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 35)  
Photos are blurred  
when shooting at  
night.  
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the  
camera steady long enough to capture a clear photo and may result in camera shake.  
Use a tripod to prevent your camera from shaking.  
Subjects come out  
When the light source is behind the subject or when there is a high contrast between light and dark  
too dark because of areas, the subject may appear too dark.  
backlighting.  
Avoid shooting toward the sun.  
Select Backlight in Scene mode. (p. 42)  
Set the flash option to  
Set the Auto Contrast Balance (ACB) option. (p. 75)  
Set the metering option to  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Quick reference  
Capturing photos of people  
Adjusting the exposure  
(brightness)  
Reducing camera shake  
ISO sensitivity (to adjust the sensitivity to light)  
Picture in Picture mode  
Optical Image Stabilization (OIS)  
f
f
f
Self Shot mode  
f
EV (to adjust exposure)  
f
Children mode  
f
Viewing files by category in Smart Album  
ACB (to compensate for subjects against bright  
backgrounds) 75  
Beauty Shot mode  
f
f
f
Intelligent Portrait mode  
f
Viewing files as thumbnails  
f
Metering  
f
Red-eye/Red-eye Fix (to prevent or correct  
red-eye) 64  
Deleting all files on the memory  
f
AEB (to capture 3 photos of the same scene  
with different exposures) 78  
f
f
Viewing files as a slide show  
f
Face Detection  
f
Viewing files on a TV  
f
Capturing photos of scenery  
Connecting your camera to a computer  
Capturing photos at night or in  
the dark  
Scene mode > Sunset, Dawn  
f
Using photo or video sharing websites  
(DV300F/DV305F only) 115  
Scene mode > Landscape  
f
f
f
Live Panorama mode  
f
Night Shot mode  
f
Sending photos or videos via email  
(DV300F/DV305F only) 118  
Flash options  
f
f
Applying effects to photos  
ISO sensitivity (to adjust the sensitivity to light)  
Adjusting sound and volume  
f
f
Adjusting the brightness of the display  
Magic Frame mode  
f
f
Funny Face mode  
Photo Filter mode  
f
f
Capturing action photos  
Changing the display language  
f
Setting the date and time  
f
Split Shot mode  
f
Continuous, Motion Capture  
f
Before contacting a service center  
f
Artistic Brush mode  
Motion Photo mode  
f
f
Capturing photos of text,  
insects, or flowers  
Image Adjust (to adjust Sharpness, Contrast,  
or Saturation) 79  
f
Scene mode > Text  
f
Close-up Shot mode  
f
Applying effects to videos  
Macro  
f
Movie Filter mode  
f
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contents  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contents  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
The following items are included in your product box.  
Optional accessories  
Camera  
AC adapter/  
USB cable  
Camera case  
A/V cable  
Rechargeable battery  
User Manual CD-ROM  
Strap  
Memory card/Memory card adapter  
The illustrations may differ slightly from the items shipped with your  
product.  
The items included in the box may differ depending on the model.  
You can purchase optional accessories at a retailer or a Samsung  
service center. Samsung is not responsible for any problems  
caused by using unauthorized accessories.  
Quick Start Guide  
Basic functions 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera layout  
Before you start, familiarize yourself with your camera’s parts and their functions.  
POWER button  
Shutter button  
Microphone  
Front LCD button  
Speaker  
Flash  
AF-assist light/Timer lamp  
Front display  
Lens  
Internal antenna*  
* Avoid contact with the internal antenna  
while using the wireless network.  
(DV300F/DV305F only)  
USB and A/V port  
Accepts USB cable and A/V cable  
Tripod mount  
Battery chamber cover  
Insert a memory card and battery  
Basic functions 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera layout  
Zoom button  
In Shooting mode: Zoom in or out  
In Playback mode: Zoom in on part  
of a photo or view files as thumbnails,  
or adjust the volume  
Status lamp  
Blinking: When the camera is  
saving a photo or video, being read  
by a computer or printer, when the  
image is out of focus, or there is a  
problem charging the battery (On  
DV300F/DV305F, when the camera  
is connecting to WLAN or sending a  
photo)  
Attaching the strap  
x
y
Steady: When the camera is  
connected to a computer, charging the  
battery, or when the image is in focus  
Main display  
Buttons  
(See the table below)  
Button  
Description  
Button  
Description  
Basic functions  
Other functions  
Move up  
Access the Home screen.  
Change the display option.  
Change the macro option.  
Change the flash option.  
Change the timer option.  
D
c
F
Access options or menus.  
Move down  
Move left  
Enter Playback mode.  
Move right  
t
Delete files in Playback mode.  
Confirm the highlighted option or menu.  
16  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Inserting the battery and memory card  
Learn how to insert the battery and an optional memory card into the camera.  
Removing the battery and memory card  
Push the card gently until it  
disengages from the camera,  
and then pull it out of the slot.  
Memory card  
Insert a memory card with the  
gold-colored contacts facing  
up.  
Battery lock  
Memory card  
Slide the lock to the right to  
release the battery.  
Insert the battery with the  
Samsung logo facing up.  
Rechargeable battery  
You can use the internal memory for temporary storage if a memory card is  
not inserted.  
Rechargeable battery  
Basic functions 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Charging the battery and turning on your camera  
Charging the battery  
Turning on your camera  
Press [POWER] to turn your camera on or off.  
The initial setup screen appears when you turn on the camera  
for the first time. (p. 19)  
Before you use the camera for the first time, you must charge the  
battery. Plug the small end of the USB cable into your camera,  
and then plug the other end of the USB cable into the AC  
adapter.  
Status lamp  
Red light on: Charging  
Red light off: Fully charged  
Red light blinking: Error  
Turning on your camera in Playback mode  
Press [P]. The camera turns on and immediately accesses  
Playback mode.  
Use only the AC adapter and USB cable supplied with your camera. If you  
use another AC adapter (such as SAC-48), the camera battery may not  
charge or work properly.  
If you turn on your camera by pressing and holding [P] until the status lamp  
blinks, the camera does not emit any sounds.  
Basic functions 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Performing the initial setup  
When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic  
settings.  
Verify that Language is highlighted, and then press  
Press [D/c] to select Home, and then press [o].  
1
4
5
When you travel to another country, select Visit, and then  
[
t] or [o].  
select a new time zone.  
Press [  
F
/
t
] to select a time zone, and then press  
].  
[o] [m  
Time Zone : Home  
London  
Press [  
D/c] to select a language, and then  
2
3
Cancel  
Set  
press [  
o
].  
] to select Time Zone, and then press  
t] or [o].  
Press [c  
The screen may differ depending on the language selected.  
[
Basic functions 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Performing the initial setup  
Press [  
c
o
] to select Date/Time Set, and then press  
].  
Press [  
[t] or [o].  
c
] to select Date Type, and then press  
6
9
[
t] or [  
Press [  
D/c] to select a date type, and then  
Date/Time Set  
Year Month Day Hour Min  
10  
11  
12  
13  
press [  
o
].  
] to select Time Type, and then press  
t] or [o].  
DST  
Press [  
[
c
Press [D/c] to select a time type, and then  
Cancel  
Set  
press [o  
].  
Press [m] to finish the initial setup.  
The screen may differ depending on the language selected.  
Press [  
F
/
t
] to select an item.  
] to set the date, time, and daylight-  
].  
7
8
Press [D  
/c  
saving time, and then press [  
o
20  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Learning icons  
The icons the camera displays on the screen change according to the mode you select or the options you set.  
1
2
Shooting options (right)  
3
Shooting information  
Icon  
Description  
Icon  
Description  
Current date  
Current time  
Intelli zoom on  
2
Photo resolution  
Video resolution  
Metering  
Front display is on  
Available number of photos  
Memory card inserted  
3
Frame rate  
: Fully charged  
: Partially charged  
: Empty (Recharge)  
Flash  
1
Shooting options (left)  
Sound Alive on  
Optical Image Stabilization (OIS)  
Auto focus option  
Icon  
Description  
Aperture value  
Shutter speed  
Shooting mode  
Exposure value adjusted  
ISO sensitivity  
Available recording time  
Auto focus frame  
Camera shake  
Image adjustment (sharpness,  
contrast, and saturation)  
Timer  
White balance  
Face detection  
Face tone  
Zoom indicator  
Photo resolution when the  
Intelli zoom is on  
Burst option  
Zoom ratio  
Basic functions 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Home screen  
You can select a shooting mode or access the settings menu by selecting the icons on the Home screen.  
No.  
Description  
Accessing the Home screen  
Current Home screen  
In Shooting or Playback mode, press [h]. Press [h] again to  
Rotate [Zoom] to the left or right to switch to another  
Home screen.  
return to the previous mode.  
1
Press [  
then press [  
Press [  
screen.  
Mode icons  
Press [  
then press [  
D
] to scroll to the Home screen name, and  
] to switch to another Home screen.  
] repeatedly to switch to another Home  
F
t
/t  
F
/
2
D
/c/  
F/t  
] to scroll to a desired mode, and  
o
] to access the mode.  
1
Album  
Wi-Fi  
Basic  
Smart Auto Program Smart Movie Movie  
2
Scene  
Back  
Live  
Panorama  
Settings  
Page Move  
Basic functions 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Home screen  
<Wi-Fi> (DV300F/DV305F only)  
Icons on the Home screen  
<Basic>  
Icon  
Description  
MobileLink: Send photos or videos to a smart phone.  
(p. 112)  
Icon  
Description  
Smart Auto: Capture a photo with a scene mode selected  
automatically by the camera. (p. 38)  
Remote Viewfinder: Use a smart phone as a remote  
shutter release and see a preview on your smart phone of  
an image from your camera. (p. 113)  
Program: Capture a photo with settings you have adjusted  
manually. (p. 39)  
Social Sharing: Upload photos or videos to file sharing  
websites. (p. 115)  
Smart Movie: Record a video with a scene mode selected  
automatically by the camera. (p. 40)  
Email: Send photos or videos stored on the camera via  
Movie: Record a video. (p. 41)  
email. (p. 117)  
Cloud: Upload photos to a cloud server. (p. 120)  
Scene: Capture a photo with options that are preset for a  
specific scene. (p. 42)  
Auto Backup: Send photos or videos that you captured  
with the camera to a PC wirelessly. (p. 121)  
Live Panorama: Capture and combine a series of photos  
to create a panoramic image. (p. 43)  
TV Link: View photos or videos that you captured with the  
camera on a widescreen TV. (p. 123)  
Settings: Adjust settings to match your preferences.  
(p. 129)  
23  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Using the Home screen  
<Scene>  
<Magic>  
Icon  
Description  
Icon  
Description  
Picture in Picture: Capture a background photo and insert  
Magic Frame: Capture a photo with various frame effects.  
a smaller photo or video into the foreground. (p. 45)  
(p. 53)  
Self Shot: Use the front display when you capture a self  
Funny Face: Capture a photo with funny face effects.  
portrait. (p. 46)  
(p. 54)  
Children: Attract children’s attention with a short animation  
Photo Filter: Capture a photo with various filter effects.  
on the front display. (p. 48)  
(p. 55)  
Jump Shot: Let your subjects know the best moment to  
Movie Filter: Record a video with various filter effects.  
jump with a countdown on the front display. (p. 48)  
(p. 56)  
Beauty Shot: Capture a portrait with options to hide facial  
Split Shot: Capture several photos and arrange them with  
imperfections. (p. 50)  
preset layouts. (p. 57)  
Intelligent Portrait: Save 2 additional portraits  
Artistic Brush: Capture a photo and save a video that  
automatically using the face detection functions. (p. 51)  
shows how to apply the filter effect. (p. 58)  
Night Shot: Capture a night scene by adjusting shutter  
speed. (p. 51)  
Motion Photo: Capture and combine a series of photos,  
and then select an area to be animated to create a  
GIF animation. (p. 59)  
Close-up Shot: Capture close-up photos of subjects.  
(p. 52)  
<Album>  
Icon  
Description  
Album: View files by category in Smart album. (p. 86)  
Photo Editor: Edit photos with various effects. (p. 95)  
24  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Using the Home screen  
Scroll to the desired wallpaper, and then press [  
o].  
Setting Wallpaper  
5
6
If you select a photo you have captured, you can set a  
specified area as wallpaper. Rotate [Zoom] to the left or right  
Set wallpaper for the Home screen with the desired image.  
to reduce or enlarge the area. Press [  
move the area.  
D/c/F/t] to  
On the Home screen, scroll to <Basic>.  
1
Select  
.
2
3
4
Press [o] to save.  
Select Display Wallpapers.  
You can also set the photo you are viewing as wallpaper by pressing [  
and then selecting Set Wallpaper in Playback mode.  
m],  
Select an option.  
Option  
Description  
Select the desired wallpaper from the default  
gallery.  
Wallpaper Gallery  
Album  
Set a photo you have captured as wallpaper.  
25  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Selecting options or menus  
To select an option or a menu, press [m], and then press [D/c/F/t] or [o].  
Going back to the previous menu  
Press [ ] to go back to the previous menu.  
In Shooting mode, press [  
m].  
1
2
Select an option or a menu.  
m
To move up or down, press [  
D
] or [  
c].  
To move left or right, press [  
F] or [  
t].  
Half-press [Shutter] to return to Shooting mode.  
Press [o] to confirm the highlighted option or menu.  
3
Basic functions 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting options or menus  
For example, to select a White Balance option in  
Program mode:  
Press [  
D
] or [o].  
/
c
] to select White Balance, and then  
4
press [t  
On the Home screen, scroll to <Basic>.  
EV  
1
White Balance  
ISO  
Select  
Press [  
EV  
.
2
3
m
].  
Flash  
Focus  
Focus Area  
Exit  
White Balance  
ISO  
Select  
Flash  
Press [  
F/t] to select a White Balance option.  
5
6
Focus  
Focus Area  
Exit  
Select  
White Balance : Daylight  
Back  
Select  
Press [o  
] to save your settings.  
27  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Setting the display and sound  
Learn how to change the basic display information and sound settings.  
Setting the option display view  
Setting the display type  
You can select a display type for the Shooting or Playback mode.  
Each type displays different shooting or playback information.  
See the table below.  
You can hide or show the option display appearing in some  
modes.  
Press [  
o] repeatedly.  
Hide the option display.  
Show the option display.  
Landscape  
Option display  
Press [D] repeatedly to change the display type.  
Panel off  
S For example, in Scene mode  
Mode  
Display type  
Hide all information about shooting options.  
Show all information about shooting options.  
Shooting  
Hide all information about the current file.  
Hide all information about the current file except  
basic information.  
Playback  
Show all information about the current file.  
Basic functions 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting the display and sound  
Setting the sound  
Turn the sound your camera emits when you perform functions  
on or off.  
On the Home screen, scroll to <Basic>.  
1
Select  
.
2
3
4
Select Sound Beep Sound.  
Select an option.  
Option  
Off  
Description  
The camera does not emit any sounds.  
The camera emits sounds.  
On  
29  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Capturing photos  
Learn how to capture photos easily and quickly in Smart Auto mode.  
On the Home screen, scroll to <Basic>.  
Press [Shutter] to capture a photo.  
1
5
6
Select  
.
Press [P] to view the captured photo.  
2
3
To delete the photo, press [  
f
], and then select Yes.  
Align your subject in the frame.  
Press [ ] to return to Shooting mode.  
P
7
See page 35 for tips to get clearer photos.  
Half-press [Shutter] to focus.  
4
A green frame means the subject is in focus.  
A red frame means the subject is out of focus.  
Basic functions 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Capturing photos  
Turning on the front display  
The front display helps you capture photos while viewing yourself.  
Zooming  
You can capture close-up photos by adjusting the zoom.  
In Shooting mode, press [F.LCD].  
Press [F.LCD] again to turn it off.  
Zoom ratio  
Zoom in  
Zoom out  
Several buttons are not available when the front display turns on.  
In Self Shot, Children, and Jump Shot modes, the front display will  
activate automatically.  
When you set timer options, the front display will remain active. (p. 63)  
When you use the camera in brightly lit or sunny areas, you may not  
be able to see the front display clearly.  
The front display will not activate when you press [F.LCD] in Playback  
mode.  
When you rotate the zoom button, the zoom ratio shown on the screen may  
change inconsistently.  
When the front display is on, the camera consumes more battery  
power.  
31  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Capturing photos  
Digital zoom  
Intelli zoom  
The Digital zoom is supported by default in Shooting mode. If you  
zoom in on a subject in Shooting mode and the zoom indicator  
is in the digital range, your camera is using the Digital zoom. By  
using both the 5X Optical zoom and 5X Digital zoom, you can  
zoom in up to 25 times.  
If the zoom indicator is in the Intelli range, your camera is using  
the Intelli zoom. Photo resolution varies according to the zoom  
rate if you use the Intelli zoom. By using both the Optical zoom  
and Intelli zoom, you can zoom in up to 10 times.  
Photo resolution  
when the Intelli  
Optical range  
Optical range  
zoom is on  
Zoom indicator  
Zoom  
indicator  
Digital range  
Intelli range  
The Digital zoom is not available with the Tracking AF option.  
If you capture a photo with the Digital zoom, the photo quality may be  
lower than normal.  
Intelli zoom is not available with the Tracking AF option.  
The Intelli zoom helps you capture a photo with less quality  
deterioration than the Digital zoom. However, the photo quality may be  
lower than when you use the Optical zoom.  
The Intelli zoom is available only when you set a 4:3 resolution ratio.  
If you set another resolution ratio with Intelli zoom on, the Intelli zoom  
will be turned off automatically.  
32  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Capturing photos  
Setting Intelli zoom  
Reducing camera shake (OIS)  
Reduce camera shake optically in Shooting mode.  
In Shooting mode, press [  
m].  
1
Select Intelli Zoom.  
2
Select an option.  
3
Icon  
Description  
Off: The Intelli zoom is deactivated.  
Before correction  
After correction  
S
S
On: The Intelli zoom is activated.  
In Shooting mode, press [  
m].  
1
2
3
Select OIS.  
Select an option.  
Icon  
Description  
Off: OIS is deactivated.  
On: OIS is activated.  
33  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
   
Capturing photos  
OIS may not function properly when:  
-
-
-
-
you move your camera to follow a moving subject  
you use the Digital zoom  
there is too much camera shake  
the shutter speed is slow (for example, when you capture night  
scenes)  
-
-
the battery is low  
you capture a close-up shot  
If you use the OIS function with a tripod, your images may be blurred  
by the vibration of the OIS sensor. Deactivate the OIS function when  
you use a tripod.  
If the camera is hit or dropped, the display will be blurry. If this occurs,  
turn off the camera, and then turn it on again.  
34  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Tips for getting a clearer photo  
Holding your camera correctly  
Reducing camera shake  
Set the Optical Image Stabilization option to reduce  
Ensure nothing is  
blocking the lens,  
flash, or microphone.  
camera shake optically. (p. 33)  
When  
is displayed  
Half-pressing the shutter button  
Half-press [Shutter] and adjust the  
focus. The camera adjusts the focus and  
exposure automatically.  
Camera shake  
When you shoot in the dark, avoid setting the flash option to  
Slow Sync or Off. The aperture remains open longer and it may be  
harder to hold the camera steady long enough to capture a clear  
photo.  
The camera sets the aperture value  
and shutter speed automatically.  
Focus frame  
Press [Shutter] to capture the photo  
if the focus frame appears in green.  
Change the composition and half-  
press [Shutter] again if the focus  
frame appears in red.  
Use a tripod or set the flash option to Fill in. (p. 64)  
Set ISO sensitivity options. (p. 66)  
35  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
   
Preventing your subject from being out of focus  
When you capture photos in low light  
Turn on the flash.  
It may be difficult to get your subject in focus when:  
-
there is little contrast between the subject and background (for  
example, when your subject is wearing clothing that is similar in color  
to the background)  
(p. 64)  
-
-
-
-
the light source behind the subject is too bright  
the subject is shiny or reflective  
the subject includes horizontal patterns, such as blinds  
the subject is not positioned in the center of the frame  
When subjects are moving rapidly  
Use the Continuous  
or Motion Capture  
function. (p. 78)  
Using the focus lock  
Half-press [Shutter] to focus. When the subject is in focus,  
you can reposition the frame to change the composition.  
When you are ready, press [Shutter] to capture your photo.  
36  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Using Basic modes  
Capture photos or record videos using basic modes. You can also use the Scene mode and the Live Panorama mode.  
Icon  
Description  
Using the Smart Auto mode  
In Smart Auto mode, your camera automatically chooses the  
appropriate camera settings based on the type of scene it  
detects. The Smart Auto mode is helpful if you are not familiar  
with the camera settings for various scenes.  
Landscapes at night  
Portraits at night  
Landscapes with backlighting  
Portraits with backlighting  
Portraits  
On the Home screen, scroll to <Basic>.  
1
Select  
.
2
3
Align your subject in the frame.  
Close-up photos of objects  
Close-up photos of text  
Sunsets  
The camera automatically selects a scene. An appropriate  
scene icon appears at the top left of the screen. The icons are  
listed below.  
Blue skies  
Forested areas  
Close-up photos of colorful subjects  
Camera is stabilized or on a tripod  
(when shooting in the dark)  
Actively moving subjects  
Fireworks (when using a tripod)  
Icon  
Description  
Landscapes  
Scenes with bright white backgrounds  
Extended functions 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Basic modes  
Half-press [Shutter] to focus.  
Using the Program mode  
In Program mode, you can set most options, except the shutter  
speed and aperture value, which the camera sets automatically.  
4
Press [Shutter] to capture the photo.  
5
If the camera does not recognize an appropriate scene mode, it uses  
the default settings for Smart Auto mode.  
Even if it detects a face, the camera may not select a portrait mode  
depending on the subject's position or lighting.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, or distance to  
the subject.  
On the Home screen, scroll to <Basic>.  
1
Select  
.
2
3
Set the desired options.  
For a list of options, refer to "Shooting options". (p. 60)  
Even if you use a tripod, the camera may not detect the  
the subject is moving.  
In Smart Auto mode, the camera consumes more battery power,  
because it changes settings often to select appropriate scenes.  
mode if  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
5
Press [Shutter] to capture the photo.  
Extended functions 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Basic modes  
Icon  
Description  
Using the Smart Movie mode  
In Smart Movie mode, your camera automatically chooses the  
appropriate camera settings based on the scene it has detected.  
Landscapes  
Sunsets  
On the Home screen, scroll to <Basic>.  
1
Blue skies  
Forested areas  
Select  
.
2
3
Align your subject in the frame.  
The camera automatically selects a scene. An appropriate  
scene icon will appear at the top left of the screen.  
Press [Shutter] to start recording.  
4
5
Press [Shutter] again to stop recording.  
If the camera does not recognize an appropriate scene mode, it uses  
the default settings for Smart Movie mode.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, and distance to  
the subject.  
Extended functions 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Basic modes  
On the Home screen, scroll to <Basic>.  
Using the Movie mode  
In Movie mode, you can customize settings to record HD videos  
of up to 20 minutes in length. The camera saves recorded videos  
as MP4 (H.264) files.  
1
2
3
Select  
.
Set desired options.  
For a list of options, refer to "Shooting options". (p. 60)  
H.264 (MPEG-4 part10/AVC) is a high-compression video format  
established by the international standards organizations ISO-IEC and  
ITU-T.  
Press [Shutter] to start recording.  
4
5
Some memory cards may not support high definition recording. If your  
card does not, set a lower resolution.  
Memory cards with slow writing speeds will not support high-  
resolution videos. To record high-resolution videos, use memory cards  
with faster write speeds.  
Press [Shutter] again to stop recording.  
If you activate the OIS function while recording a video, the camera  
may record the operating sound of the OIS function.  
If you use the zoom function when recording a video, the camera may  
record the noise of the zoom operating. To decrease zoom noise, use  
the Sound Alive function. (p. 80)  
Extended functions 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Basic modes  
Pause recording  
Using the Scene mode  
In Scene mode, you can capture a photo with options that are  
preset for a specific scene.  
The camera allows you to temporarily pause a video while  
recording. With this function, you can record separate scenes as  
a single video.  
On the Home screen, scroll to <Basic>.  
1
Select  
.
2
3
Select a scene.  
Press [o] to pause while recording.  
Landscape  
Press [o] to resume.  
Panel off  
Extended functions 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Basic modes  
Option  
Description  
Using the Live Panorama mode  
In Live Panorama mode, you can capture a wide panoramic  
scene in a single photo. Capture and combine a series of photos  
to create a panoramic image.  
Landscape  
Capture still-life scenes and landscapes.  
Capture scenes at sunset, with natural-looking  
reds and yellows.  
Sunset  
Dawn  
Capture scenes at sunrise.  
Capture backlit subjects.  
Backlight  
Reduce underexposure of subjects caused by  
sunlight reflected from sand or snow.  
Beach & Snow  
Text  
Shooting example  
S
Clearly capture text from printed or electronic  
documents.  
On the Home screen, scroll to <Basic>.  
1
2
3
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
5
Select  
.
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Press [Shutter] to capture the photo.  
Align the camera with the far left or the far right, or very top or  
bottom, of the scene you want to capture.  
Press and hold [Shutter] to start shooting.  
4
Extended functions 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Basic modes  
With [Shutter] pressed, slowly move the camera in the  
direction that will let it capture the rest of the panorama.  
5
For best results when capturing panoramic photos, avoid the  
following:  
When the viewfinder is aligned with the next scene, the  
camera captures the next photo automatically.  
-
-
-
-
-
-
-
-
moving the camera too quickly or too slowly  
moving the camera too little to capture the next image  
moving the camera at irregular speeds  
shaking the camera  
changing the camera direction while capturing a photo  
shooting in dark places  
capturing moving subjects nearby  
shooting conditions where the brightness or color of light is  
changing  
Selecting Live Panorama mode will disable the digital and optical zoom  
functions. If you select Live Panorama mode while the lens is zoomed  
in, the camera automatically zooms out to the default position.  
In Live Panorama mode, some shooting options are not available.  
The camera may stop shooting due to the shooting composition or  
movement within the scene.  
When you are finished, release [Shutter].  
6
In Live Panorama mode, your camera may not capture the last scene  
in its entirety if you stop moving the camera exactly where you want  
the scene to end. To capture the entire scene, move your camera  
slightly beyond the point where you want the scene to end.  
When you have captured all the necessary shots, the camera  
combines them into one panoramic photo.  
Extended functions 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Scene modes  
Capture photos by using the front display or selecting appropriate modes for various scenes.  
Press [  
o
] to set the photo as the background image.  
Using the Picture in Picture mode  
In Picture in Picture mode, you can capture or select a full-sized  
background photo, and then insert a smaller photo or video into  
the foreground.  
4
To recapture a background photo, press [ ].  
m
On the Home screen, scroll to <Scene>.  
1
Select  
.
2
To set the final video size when inserting a video, press  
], and then select Movie Size a desired video size.  
[
m
Retake  
Move Frame  
Half-press [Shutter] to focus, and then press [Shutter]  
to capture a background photo.  
3
Press [  
o
], and then press [  
D
/
/
c
c
/
/
F
/
/
t
] to change  
] to change  
5
6
7
To select a background photo from your saved photos, press  
], and then select Open Image a desired photo.  
You cannot select a video file or a photo captured in Live  
Panorama mode.  
the insertion point.  
Press [ ], and then press [  
the insertion size.  
Press [ ] to save the setting.  
[
m
o
D
F
t
o
Extended functions 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Scene modes  
Half-press [Shutter] to focus, and then press [Shutter]  
to capture and insert a photo.  
8
Using the Self Shot mode  
Conveniently capture photos of yourself with the front display.  
The insertion window appears larger when you half-press  
[Shutter], so that you can determine whether or not the  
subject is in focus.  
On the Home screen, scroll to <Scene>.  
1
Select  
.
2
To record a video, press [  
c]. To stop recording and insert the  
Your camera will automatically detect your face and display a  
frame to indicate the detected face.  
video, press [ ] again.  
c
When capturing background photos, the resolution is automatically set  
to and all photos captured are saved.  
The final Picture-in-picture photos or videos are saved as one  
combined file and the inserted photos or videos are not saved  
separately.  
When inserting an image, the resolution for the combined file is  
automatically set to  
When inserting a video, the resolution for the combined file is  
automatically set to or smaller.  
.
When capturing a background photo, a vertical photo captured in the  
vertical position is displayed horizontally without auto rotate.  
The maximum size of the insertion window is 1/4 of the screen, and  
the aspect ratio stays the same when changing the size.  
The maximum length of video that can be inserted is 20 minutes.  
In Picture in Picture mode, the available zoom range may be less than  
in other shooting modes.  
Half-press [Shutter] to focus.  
3
4
In Picture in Picture mode, you cannot set the Sound Alive options.  
When you select a background photo from your saved photos,  
black bars may appear at the edges of the image, depending on the  
aspect ratio.  
Press [Shutter] to capture the photo.  
In Self Shot mode, the front display will activate automatically.  
Extended functions 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Scene modes  
Capturing an Easy Self Shot  
Customizing the front display  
If you press [F.LCD] when the power is off, the front display turns  
on in Easy Self Shot mode. Because the main display is off, the  
camera consumes less battery power and you can prevent others  
from viewing the main display.  
The camera will turn off when you press [F.LCD] again or press  
[POWER].  
You can let subjects know when to smile or attract their attention  
to the lens.  
In Shooting mode, press [  
m].  
1
2
Select Half Shutter an option.  
The front display will turn off and the main display will turn on  
when you press [h].  
Half Shutter  
Off  
Smile Icon  
Eyesight catching  
Back  
Select  
Icon  
Description  
Off: No icon will appear on the front display.  
Smile Icon: Set an icon to appear that prompts the  
subject to smile.  
Eyesight catching: Set an icon to appear to attract  
the subject’s attention to the lens.  
Extended functions 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Scene modes  
Using the Children mode  
The Children mode attracts children by showing a short animation  
on the front display.  
Using the Jump Shot mode  
Capture a photo of people jumping. An icon will appear on the  
front display to tell your subjects when to jump.  
On the Home screen, scroll to <Scene>.  
1
Select  
.
2
The front display will activate and play the preset animation.  
Press [ ].  
m
3
4
5
Select Background Music an option.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
On the Home screen, scroll to <Scene>.  
1
Press [Shutter] to capture the photo.  
6
Select  
.
2
To capture animated jump shots, refer to  
"Capturing animated jump shots". (p. 49)  
You can download animations for the front display from Intelli-studio. (p. 102)  
Press [Shutter].  
3
The AF-assist light/timer lamp blinks.  
The front display will start a countdown a few seconds before  
shooting.  
Extended functions 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Scene modes  
Capturing animated jump shots  
Jump when the jump icon appears on the front display.  
4
The camera will capture multiple shots.  
Capture multiple jump shots, and then save them as a  
GIF animation. This feature is available only when you insert a  
memory card into the camera.  
In Jump Shot mode, press [  
m
].  
1
2
Select Jump Shot GIF animation.  
The camera saves an animated GIF and one JPG of the  
middle scene from the GIF file. You cannot view the JPG file  
on your camera. To view it, connect your camera to a PC.  
(p. 101)  
If you select GIF animation, the resolution is automatically set to  
.
If you select GIF animation, it may take longer to save files.  
Use a tripod to prevent your camera from shaking.  
If you are capturing photos using the jump shot timer in low light  
conditions or indoors, photos may appear dark.  
Use a tripod to prevent your camera from shaking.  
Extended functions 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Scene modes  
Press [  
F/t] to adjust Face Tone.  
Using the Beauty Shot mode  
In Beauty Shot mode, you can capture a portrait with options to  
hide facial imperfections.  
6
For example, increase the face tone setting to make skin  
appear lighter.  
On the Home screen, scroll to <Scene>.  
1
Select  
Press [  
.
2
3
F/  
t
] to adjust Face Retouch.  
Face Tone : 2  
For example, increase the face retouch setting to hide more  
imperfections.  
Cancel  
Set  
Press [  
o
] to save the setting.  
7
8
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Face Retouch : 2  
Press [Shutter] to capture the photo.  
9
Panel off  
Press [  
m
].  
4
5
Select Face Tone.  
Extended functions 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Scene modes  
Using the Intelligent Portrait mode  
Using the Night Shot mode  
In Night Shot mode, you can use a slow shutter speed to extend  
the time the shutter stays open. Increase the aperture value to  
prevent overexposure.  
In Intelligent Portrait mode, the camera detects the face of a  
subject and automatically enlarges the face, crops the photo  
around the face, and then saves the original photo and 2 portraits  
in 3 separate files. You can use Intelligent Portrait mode to extract  
and save close-up portraits of a single individual from landscape  
shots.  
On the Home screen, scroll to <Scene>.  
1
Select  
Press [  
.
2
3
On the Home screen, scroll to <Scene>.  
1
F
/
t
] to adjust the shutter speed.  
Select  
.
2
3
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Press [Shutter] to capture the photo.  
Shutter Speed : 1 sec  
4
The original photo and 2 cropped photos are saved under  
consecutive file names.  
Panel off  
The Intelligent Portrait mode will save only the original photo if:  
-
-
-
no face is detected  
more than 2 faces are detected  
the detected facial area is larger than a certain ratio  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
5
The cropped photos maintain the same aspect ratio (16:9) as the  
original or the inverse aspect ratio (9:16).  
In Intelligent Portrait mode, it may take longer to save files.  
Press [Shutter] to capture the photo.  
Use a tripod to prevent blurry photos.  
Extended functions 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Scene modes  
Using the Close-up Shot mode  
In Close-up Shot mode, you can capture close-up photos of  
subjects, such as flowers or insects.  
On the Home screen, scroll to <Scene>.  
1
Select  
.
2
3
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Press [Shutter] to capture the photo.  
4
Extended functions 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Capture a photo or record a video with various effects.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Using the Magic Frame mode  
In Magic Frame Shot mode, you can apply various frame effects  
to your photos. The shape and the feel of the photos will change  
according to the frame you select.  
4
5
Press [Shutter] to capture the photo.  
On the Home screen, scroll to <Magic>.  
In Magic Frame mode, the resolution is automatically set to  
.
1
Select  
.
2
3
Select a desired frame.  
Mural  
Panel off  
Extended functions 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Press [  
m
].  
Using the Funny Face mode  
5
6
7
8
9
10  
Capture a photo with effects that distort the face.  
Select Distortion Level.  
On the Home screen, scroll to <Magic>.  
1
Press [F  
/
t
] to adjust Distortion Level.  
Select  
.
2
3
4
Press [o  
] to save the setting.  
Aim the camera at a face.  
Select a desired effect.  
Half-press [Shutter] to focus.  
Press [Shutter] to capture the photo.  
The Funny Face mode does not work if no face is detected.  
When several faces are detected, it is applied to the closest face only.  
Panel off  
Extended functions 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Using the Photo Filter mode  
Apply various filter effects to your photos to create unique images.  
Option  
Description  
Apply a tilt-shift effect to make the subject appear  
in miniature.  
Miniature  
Apply the retro-looking colors, high contrast, and  
strong vignette effect of Lomo cameras.  
Vignetting  
Ink Painting  
Oil Painting  
Cartoon  
Apply a watercolor painting effect.  
Apply an oil painting effect.  
Apply a cartoon painting effect.  
Miniature  
Vignetting  
Add lines that radiate outward from bright objects to  
imitate the visual effect of a cross filter.  
Cross Filter  
Sketch  
Apply a pen sketch effect.  
Soft Focus  
Hide facial imperfections or apply dreamy effects.  
Blacken the edges of the frame and distort objects  
to imitate the visual effect of a fisheye lens.  
Fish-eye  
Fish-eye  
Sketch  
Old Film  
Half Tone Dot  
Classic  
Apply a vintage film effect.  
Apply a halftone effect.  
On the Home screen, scroll to <Magic>.  
1
2
3
Apply a black and white effect.  
Apply a sepia tone effect.  
Select  
.
Retro  
Blur the edges of a photo to emphasize the subjects  
in the center.  
Select an effect.  
Zooming Shot  
Extended functions 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
Option  
Sketch  
Description  
Apply a pen sketch effect.  
Distort close objects to imitate the visual effect  
of a fisheye lens.  
Press [Shutter] to capture a photo.  
5
Fish-eye  
Classic  
Retro  
Apply a black and white effect.  
Apply a sepia tone effect.  
Depending on the option you select, the resolution may change to  
smaller automatically.  
or  
Create a vivid look with sharp contrast and  
strong color.  
Palette Effect 1  
Palette Effect 2  
Palette Effect 3  
Palette Effect 4  
Make scenes clean and clear.  
Apply a soft brown tone.  
Using the Movie Filter mode  
Apply various filter effects to your videos to create unique images.  
Create a cold and monotone effect.  
On the Home screen, scroll to <Magic>.  
1
Press [Shutter] to start recording.  
4
5
Select  
.
2
3
Press [Shutter] again to stop recording.  
Select an effect.  
If you select Miniature, the miniature recording time is also displayed  
and is shorter than the real recording time.  
Option  
Description  
If you select Miniature, you cannot record the video sound.  
Depending on the option you select, the recording speed may change  
Apply a tilt-shift effect to make the subject  
appear in miniature.  
Miniature  
to  
and the recording resolution may change to  
or smaller  
automatically.  
Apply the retro-looking colors, high contrast,  
and strong vignette effect of Lomo cameras.  
Vignetting  
Half Tone Dot  
Apply a halftone effect.  
Extended functions 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Using the Split Shot mode  
4
5
In Split Shot mode, you can capture several photos and arrange  
them with preset layouts.  
Press [Shutter] to capture a photo.  
Repeat steps 4 and 5 to capture the rest of the photos.  
To recapture a photo, press [ ].  
On the Home screen, scroll to <Magic>.  
1
f
Select  
.
2
3
In Split Shot mode, the resolution is automatically set to  
In Split Shot mode, the available zoom range may be less than in other  
shooting modes.  
or smaller.  
Select a split style.  
To adjust the sharpness of the dividing line, press [m],  
and then select Line Blur a desired value.  
To apply a Smart Filter effect to part of the shot, press  
], and then select Smart Filter a desired option.  
[
m
You can apply different Smart Filter effects to each part of the  
shot.  
Panel off  
Extended functions 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Using the Artistic Brush mode  
4
5
In Artistic Brush mode, you can capture a photo, and then view a  
video that shows how to apply the filter effect.  
Press [Shutter] to capture a photo.  
After capturing the photo, the video that shows how to apply  
the filter will begin automatically.  
On the Home screen, scroll to <Magic>.  
1
Select  
.
2
3
In Artistic Brush mode, the resolution is automatically set to  
smaller.  
In Artistic Brush mode, both the photo with the filter effect and the  
video that shows how to apply the filter effect are saved.  
In Artistic Brush mode, the available zoom range may be less than in  
other shooting modes.  
or  
Select a filter.  
In Artistic Brush mode, it may take longer to save files.  
You cannot upload a video captured in Artistic Brush mode via the  
wireless networking feature on your camera. (DV300F/DV305F)  
Ink Painting  
Panel off  
Option  
Description  
Ink Painting  
Cartoon  
Apply a watercolor painting effect.  
Apply a cartoon painting effect.  
Apply a pen sketch effect.  
Sketch  
Extended functions 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Magic modes  
Rotate [Zoom] to the left or right to reduce or enlarge  
the area.  
Using the Motion Photo mode  
6
7
In Motion Photo mode, you can capture and combine a series of  
photos, and then select an area to be animated to create a GIF  
animation. This mode is available only when you insert a memory  
card into the camera.  
On the Home screen, scroll to <Magic>.  
1
Select  
.
2
3
Frame Size  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Cancel  
Save  
Press [Shutter] to capture the photo.  
Press [o  
] to save the photo.  
4
5
The camera captures multiple photos while the status lamp  
is blinking.  
The camera saves an animated GIF and one JPG of the first  
scene from the GIF file. You cannot view the JPG file on your  
camera. To view it, connect your camera to a PC. (p. 101)  
Press [D/c/F/t] to scroll to an area to be  
animated.  
In Motion Photo mode, the resolution is automatically set to  
Use a tripod to prevent your camera from shaking.  
In Motion Photo mode, it may take longer to save files.  
.
Extended functions 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shooting options  
Learn how to set the options in Shooting mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a resolution and quality  
Learn how to change the image resolution and quality settings.  
Setting the video resolution  
Selecting a resolution  
As you increase the resolution, your photo or video will include  
more pixels, so it can be printed on larger paper or displayed on  
a larger screen. When you use a high resolution, the file size will  
also increase.  
In Video Shooting mode, press [  
m].  
1
Select Movie Size.  
2
3
Select an option.  
Setting the photo resolution  
Icon  
Description  
In Shooting mode, press [  
Select Photo Size.  
Select an option.  
m].  
1280 X 720: HD files to play back on an HDTV.  
640 X 480: SD files to play back on an analog TV.  
320 X 240: Post on a web page.  
1
2
3
For Sharing (DV300F/DV305F only): Post on a website  
using the wireless network (30 seconds maximum).  
Icon  
Description  
4608 X 3456: Print on A1 paper.  
4608 X 3072: Print on A1 paper in wide ratio (3:2).  
4608 X 2592: Print on A1 paper in panorama ratio (16:9)  
or play back on an HDTV.  
3648 X 2736: Print on A2 paper.  
2592 X 1944: Print on A4 paper.  
1984 X 1488: Print on A5 paper.  
1920 X 1080: Print on A5 paper in panorama ratio (16:9)  
or play back on an HDTV.  
1024 X 768: Attach to an email.  
Shooting options 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a resolution and quality  
Setting the video quality  
Selecting an image quality  
Set the photo and video quality settings. Higher image quality  
settings will result in larger file sizes.  
The camera compresses and saves the videos you record in  
MP4 (H.264) format.  
In Video Shooting mode, press [  
m].  
1
2
3
Setting the photo quality  
The camera compresses and saves the photos you capture in  
the JPEG format.  
Select Frame Rate.  
Select an option.  
In Shooting mode, press [  
m].  
1
2
3
Icon  
Description  
Select Quality.  
30 FPS: Record 30 frames per second.  
Select an option.  
15 FPS: Record 15 frames per second.  
Icon  
Description  
Super Fine: Capture photos in super high quality.  
Fine: Capture photos in high quality.  
Normal: Capture photos in normal quality.  
Shooting options 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the timer  
Learn how to set the timer to delay shooting.  
In Shooting mode, press [  
t].  
Press [Shutter] to start the timer.  
1
3
The AF-assist light/timer lamp blinks. The camera will  
automatically capture a photo after the specified time has  
elapsed.  
Timer  
Off  
The front display will start a countdown before shooting.  
10 Sec  
2 Sec  
Double  
Press [Shutter] or [t] to cancel the timer.  
Depending on the Face Detection options you selected, the timer  
function may not be available.  
Back  
Select  
In some modes, you can also set the timer option by pressing  
[m], and then selecting Timer.  
Select an option.  
2
Icon  
Description  
Off: The timer is not active.  
10 Sec: Capture a photo after a 10-second delay.  
2 Sec: Capture a photo after a 2-second delay.  
Double: Capture one photo after a 10-second delay  
and another photo after a 2-second delay.  
Available options may differ depending on the shooting conditions.  
Shooting options 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in the dark  
Learn how to capture photos at night or in low light conditions.  
Preventing red-eye  
Using the flash  
If the flash fires when you capture a photo of a person in the dark,  
a red glow may appear in the person’s eyes. To prevent this,  
select Red-eye or Red-eye Fix. Refer to flash options in  
“Using the flash.”  
Use the flash when you capture photos in the dark or when you  
need more light in your photos.  
In Shooting mode, press [F].  
1
Flash  
Off  
Auto  
Red-eye  
Fill in  
Slow Sync  
Red-eye Fix  
Before correction  
After correction  
S
S
Back  
Select  
Select an option.  
2
Icon  
Description  
Off:  
The flash will not fire.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Auto: The camera will select a proper flash setting for  
the scene it detects in Smart Auto mode.  
Auto: The flash will fire automatically when the subject or  
background is dark.  
Shooting options 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Shooting in the dark  
Icon  
Description  
Red-eye:  
Flash options are not available if you set burst options or select  
Blink Detection.  
Make sure that your subjects are within the recommended distance  
from the flash. (p. 150)  
If light from the flash is reflected or there is a substantial amount of  
dust in the air, tiny spots may appear in your photo.  
The flash will fire twice when the subject or  
background is dark to reduce the red-eye effect.  
There is an interval between the 2 bursts of the flash.  
Do not move until the flash fires a second time.  
In some modes, you can also set the flash option by pressing [  
m],  
and then selecting Flash.  
Fill in:  
The flash always fires.  
The camera automatically adjusts light intensity.  
Slow Sync:  
The flash fires and the shutter stays open longer.  
This option is recommended when you want to  
capture more ambient light to reveal more details in  
the background.  
Use a tripod to prevent your photos from blurring.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Red-eye Fix:  
The flash fires twice when the subject or background  
is dark. The camera corrects red-eyes through its  
advanced software analysis.  
There is an interval between the 2 bursts of the flash.  
Do not move until the flash fires a second time.  
Available options may differ depending on the shooting conditions.  
Shooting options 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in the dark  
Adjusting the ISO sensitivity  
The ISO sensitivity is the measure of a film’s sensitivity to light as  
defined by the International Organization for Standardization (ISO).  
The higher ISO sensitivity you select, the more sensitive to light  
your camera becomes. Use a higher ISO sensitivity to capture  
better photos and reduce camera shake when not using the  
flash.  
In Shooting mode, press [  
m].  
1
2
3
Select ISO.  
Select an option.  
Select  
to use an appropriate ISO sensitivity based on the  
brightness of the subject and lighting.  
Higher ISO sensitivities may result in more image noise.  
Shooting options 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the camera’s focus  
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.  
In Shooting mode, press [  
c].  
Using macro  
Use macro to capture close-up photos of subjects, such as  
flowers or insects.  
1
Focus  
Normal (AF)  
Macro  
Back  
Select  
Select an option.  
2
Icon  
Description  
Normal (AF): Focus on a subject farther than  
32 in. (80 cm) away. Farther than 98 in. (250 cm) away  
when you use the zoom.  
Macro: Focus on a subject that is 2–32 in. (5–80 cm)  
from the camera. 39–98 in. (100–250 cm) when you use  
the zoom.  
Try to hold the camera firmly to prevent blurry photos.  
Turn off the flash if the distance to the subject is less than  
15.7 in. (40 cm).  
Auto Macro:  
Focus on a subject farther than 2 in. (5 cm) away.  
Farther than 39 in. (100 cm) away when you use the  
zoom.  
It is set automatically in some shooting modes.  
Available options may differ depending on the shooting conditions.  
In some modes, you can also set the focus option by pressing [  
m],  
and then selecting Focus.  
Shooting options 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the camera’s focus  
Using tracking auto focus  
Tracking AF allows you to track and auto focus on your subject,  
even when you are moving.  
If you do not select a focus area, the focus frame will appear in the  
center of the screen.  
Tracking a subject may fail when:  
-
-
-
-
-
-
the subject is too small  
the subject moves excessively  
the subject is backlit or you are shooting in a dark place  
colors or patterns on the subject and the background are the same  
the subject includes horizontal patterns, such as blinds  
the camera shakes excessively  
In Shooting mode, press [  
m].  
1
2
3
Select Focus Area Tracking AF.  
Focus on the subject you want to track, and then  
When tracking a subject fails, the focus frame will appear as a white  
single-line frame ( ).  
If the camera fails to track the subject, you must reselect the subject  
to track.  
If the camera fails to focus, the focus frame will change to a red  
single-line frame ( ).  
If you use this function, you cannot set Face Detection options, Timer  
options, Burst options, and Intelli zoom.  
press [o].  
A focus frame appears on the subject and follows the subject  
as you move the camera.  
The white frame means that your camera is tracking the  
subject.  
When you half-press [Shutter], the green frame means that  
your subject is in focus.  
Press [Shutter] to capture the photo.  
4
Shooting options 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the camera’s focus  
Adjusting the focus area  
You can get clearer photos by selecting an appropriate focus  
area according to your subject's location in the scene.  
In Shooting mode, press [  
Select Focus Area.  
Select an option.  
m].  
1
2
3
Icon  
Description  
Center AF: Focus on the center of the frame (suitable  
when subjects are located at or near the center).  
Multi AF: Focus on one or more of 9 possible areas.  
Tracking AF: Focus on and track the subject. (p. 68)  
Available shooting options may differ depending on the shooting  
conditions.  
Shooting options 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Face Detection  
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera  
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use  
Smart Face Recognition to register faces and prioritize the focus on them.  
Detecting faces  
When your camera detects a face, it tracks the detected face  
automatically.  
Face Detection may not be effective when:  
Your camera automatically detects up to 10 human faces in one  
scene.  
-
the subject is far from the camera (The focus frame will appear  
orange for Smile Shot and Blink Detection.)  
it is too bright or too dark  
In Shooting mode, press [  
m
].  
1
2
-
-
-
-
-
the subject is not facing the camera  
Select Face Detection Normal.  
the subject is wearing sunglasses or a mask  
the subject’s facial expression changes drastically  
the subject is backlit or the lighting conditions are unstable  
Face Detection is not available when you set the Tracking AF.  
Depending on the shooting options you selected, available Face  
Detection options may differ.  
The face nearest the camera  
Depending on the Face Detection options you selected, the timer  
function may not be available.  
When you set Face Detection options, the AF area is automatically  
set to Multi AF.  
Depending on the Face Detection options you selected, Burst options  
may not be available.  
When you set Smart Face Recognition option and capture photos of  
detected faces, they will be registered in the face list.  
You can view registered faces in order of priority in Playback mode.  
(p. 86) Even though faces are registered successfully, they may not be  
classified in Playback mode.  
or nearest the center of the  
scene appears in a white  
focus frame and the rest  
of the faces appear in gray  
focus frames.  
The closer you are to the subjects, the quicker your camera will detect faces.  
A face detected with Smart Face Recognition option may not appear  
in the face list or Smart Album.  
Shooting options 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Face Detection  
Capturing a smile shot  
The camera automatically releases the shutter when it detects a  
smiling face.  
Detecting eye blinking  
If your camera detects closed eyes, it will automatically capture  
2 photos in succession.  
In Shooting mode, press [  
m
].  
In Shooting mode, press [  
m
].  
1
2
3
1
2
Select Face Detection Smile Shot.  
Select Face Detection Blink Detection.  
Compose your shot.  
The camera automatically releases the shutter when it detects  
a smiling face.  
When your subject smiles  
broadly, your camera can detect  
the smile more easily.  
Shooting options 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Face Detection  
Using Smart Face Recognition  
The camera may recognize and register faces incorrectly depending  
on lighting conditions, drastic changes in the subject's pose or face,  
and whether or not the subject is wearing glasses.  
The camera can automatically register up to 12 faces. If the camera  
recognizes a new face when 12 faces have already been registered,  
it will replace the lowest priority face with the new one.  
The camera automatically registers faces that you frequently  
photograph. The Smart Face Recognition feature will  
automatically prioritize the focus on those faces and on favorite  
faces. The Smart Face Recognition feature is available only when  
you use a memory card.  
In Shooting mode, press [  
m].  
1
2
Select Face Detection Smart Face Recognition.  
: Faces that you have registered as favorites.  
(To register faces as favorites, refer to page 73.)  
: Faces that the camera has automatically registered.  
Shooting options 72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Face Detection  
When you are finished capturing the photos, the face list  
appears.  
Registering faces as your favorites (My Star)  
You can register your favorite faces to prioritize the focus and  
exposure on those faces. This feature is available only when you  
use a memory card.  
4
Your favorite faces are indicated with a  
on the face list.  
You can register up to 8 favorite faces.  
The flash will not fire when you register a favorite face.  
If you register the same face twice, you can delete one of the faces  
in the face list.  
In Shooting mode, press [  
m].  
1
2
3
Select Smart FR Edit My Star.  
Align your subjects face with the oval guideline, and then  
press [Shutter] to register the face.  
Viewing your favorite faces  
In Shooting mode, press [m].  
1
Select Smart FR Edit Face List.  
2
To change the ranking of your favorite faces, press [o], and then  
select Edit Ranking. (p. 85)  
To delete a favorite face, press [o], and then select Cancel My  
Star. (p. 86)  
Cancel  
Set  
Capture photos of one person at a time when registering faces.  
Capture 5 photos of the subject’s face for best results: one each  
from the front, left, right, above, and below.  
When capturing photos from the left, right, above, and below,  
instruct the subject not to turn his or her face more than  
30 degrees.  
You can register a face even if you capture only one photo of the  
subject's face.  
Shooting options 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting brightness and color  
Learn how to adjust the brightness and color for better image quality.  
Select a value to adjust the exposure.  
Adjusting the exposure manually (EV)  
Depending on the intensity of the ambient light, your photos  
may be too bright or dark. In these cases, you can adjust the  
exposure to get a better photo.  
3
4
The photo will be brighter as the exposure value increases.  
EV : +1  
Cancel  
Set  
Darker (-)  
Neutral (0)  
Brighter (+)  
S
S
S
Press [o  
] to save your settings.  
In Shooting mode, press [  
m].  
1
2
Once you adjust the exposure, the setting will be stored automatically.  
You may need to change the exposure value later to avoid  
overexposure or underexposure.  
Select EV.  
If you cannot decide on an appropriate exposure, select the  
AEB (Auto Exposure Bracket) option. The camera will capture  
3 consecutive photos, each with a different exposure: normal,  
underexposed, and overexposed. (p. 78)  
Shooting options 74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting brightness and color  
Compensating for backlighting (ACB)  
Changing the metering option  
The metering mode refers to the way in which a camera  
measures the quantity of light. The brightness and lighting of your  
photos will vary depending on the metering mode you select.  
When the light source is behind your subject or there is high  
contrast between your subject and the background, your subject  
is likely to appear dark in the photo. In this case, set the Auto  
Contrast Balance (ACB) option.  
In Shooting mode, press [  
m].  
1
2
3
Select Metering.  
Select an option.  
Icon  
Description  
Multi:  
Your camera divides the frame into several areas,  
and then measures the light intensity of each area.  
S Without ACB  
S With ACB  
Suitable for general photos.  
In Shooting mode, press [  
m].  
Spot:  
1
2
3
Your camera measures only the light intensity at the  
very center of the frame.  
Select ACB.  
If a subject is not in the center of the frame, your  
photo may be improperly exposed.  
Select an option.  
Icon  
Description  
Suitable for a subject with backlighting.  
Center-weighted:  
Off: ACB (Auto Contrast Balance) is deactivated.  
Your camera averages the meter reading of the entire  
frame with emphasis placed on the center.  
On: ACB (Auto Contrast Balance) is activated.  
Suitable for photos with subjects in the center of the  
frame.  
The ACB feature is always on in Smart Auto mode.  
The ACB feature is not available when you set Burst options.  
Shooting options 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Adjusting brightness and color  
In Shooting mode, press [  
Select White Balance.  
Select an option.  
m].  
Selecting a White Balance setting  
1
2
3
The color of your photo depends on the type and quality of the  
light source. If you want the color of your photo to be realistic,  
select a White Balance setting that is appropriate for the lighting  
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.  
Icon  
Description  
Auto WB: Automatically set the White Balance based  
on the lighting conditions.  
Daylight: For outdoor photos on a sunny day.  
Cloudy: For outdoor photos on a cloudy day or in  
shadows.  
Daylight  
Auto WB  
Fluorescent_H: For shooting under a daylight  
fluorescent or 3-way fluorescent light.  
Fluorescent_L: For shooting under white fluorescent  
light.  
Tungsten: For shooting indoor photos under  
incandescent bulbs or halogen lamps.  
Custom Set: To use White Balance settings that you  
define. (p. 77)  
Cloudy  
Tungsten  
Shooting options 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting brightness and color  
Defining your own White Balance  
You can customize the White Balance by capturing a photo of  
a white surface, such as a piece of paper, under the lighting  
conditions in which you intend to capture a photo. The White  
Balance feature will help you to match the colors in your photo  
with the actual scene.  
In Shooting mode, press [  
m].  
1
2
3
Select White Balance Custom Set.  
Aim the lens at a piece of white paper, and then press  
[Shutter].  
Shooting options 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using burst modes  
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.  
Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.  
Icon  
Description  
Motion Capture: While you are pressing [Shutter], the  
camera captures  
photos (5 photos per second;  
maximum of 30 photos).  
AEB:  
Capture 3 consecutive photos, each with a different  
exposure: normal, underexposed, and overexposed.  
Use a tripod to prevent blurry photos.  
In Shooting mode, press [  
m].  
1
2
3
Select Drive.  
You can use the flash and timer only when you select Single.  
When you select Motion Capture, your camera will set the resolution  
Select an option.  
to  
and set the ISO sensitivity to Auto.  
Icon  
Description  
Depending on the Face Detection option you selected, some Burst  
options may not be available.  
Single: Capture a single photo.  
Continuous:  
While you are pressing [Shutter], the camera  
continuously captures photos.  
The maximum number of photos depends on the  
capacity of your memory card.  
Shooting options 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Adjusting images  
Adjust the sharpness, contrast, or saturation of your photos.  
In Shooting mode, press [  
Select Image Adjust.  
Select an option.  
m
].  
Press [  
F
/
t
] to adjust each value.  
1
2
3
4
Sharpness  
Description  
Soften the edges on your photos (suitable for  
editing the photos on your computer).  
-
Sharpness  
Contrast  
Saturation  
Sharpen the edges to improve the clarity of your  
photos. This may also increase the noise in your  
photos.  
+
Contrast  
Description  
Image Adjust  
-
Decrease the color and brightness.  
Increase the color and brightness.  
Sharpness  
+
Contrast  
Saturation  
Description  
Saturation  
-
Decrease the saturation.  
Increase the saturation.  
Cancel  
Set  
+
Press [o] to save your settings.  
5
Select 0 if you do not want to apply any effects (suitable for printing).  
Shooting options 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Reducing the sound of the zoom  
When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the  
zoom noise.  
In Video Shooting mode, press [  
m].  
1
2
3
Select Voice.  
Select an option.  
Icon  
Description  
Sound Alive On: Turn on the Sound Alive function to  
reduce the zoom noise.  
Sound Alive Off: Turn off the Sound Alive function.  
The camera can record the zoom noise.  
Mute: Do not record sounds.  
Do not block the microphone when you use the Sound Alive  
function.  
Recordings made with Sound Alive may differ from actual  
sounds.  
In Picture-in-Picture mode, you cannot set the Sound Alive  
options.  
Shooting options 80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Available shooting options by shooting mode  
For details about shooting options, refer to "Shooting options".  
Smart  
Auto  
Smart  
Movie  
Live  
Panorama  
Picture in  
Picture  
Jump  
Shot  
Beauty  
Shot  
Program  
Movie  
Scene  
Self Shot Children  
Resolution  
Quality  
O
U
U
U
-
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
U
-
O
O
U
-
O
O
O
U
-
O
O
-
O
O
O
U
-
O
O
U
-
O
O
U
U
-
U
U
-
U
-
Timer  
U
U
-
Flash  
-
O
-
ISO sensitivity  
Macro  
-
-
-
-
O
-
-
-
-
-
U
-
U
-
U
-
U
-
U
-
Focus area  
Face detection  
EV  
-
-
-
U
U
-
-
-
-
-
-
U
-
U
-
U
-
U
-
-
O
-
-
-
-
ACB  
-
-
-
-
-
-
-
-
U
-
Metering  
White balance  
Drive  
-
O
O
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
U
-
Image adjust  
Sound Alive  
Digital zoom  
Intelli zoom  
OIS  
-
-
-
-
-
-
-
-
U
-
-
O
-
O
-
-
-
-
-
-
-
-
O
U
O
-
-
-
-
-
-
U
U
O
-
-
-
-
-
-
-
-
U
O
O
O
-
O
O
O
O
O
: In these modes, some options are limited or a certain option is set by default. O: The option is available in this mode.  
U
Shooting options 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Available shooting options by shooting mode  
Intelligent  
Portrait  
Close-up  
Shot  
Magic  
Frame  
Funny  
Face  
Photo  
Filter  
Movie  
Filter  
Artistic  
Brush  
Motion  
Photo  
Night Shot  
Split Shot  
Resolution  
Quality  
O
O
O
O
O
U
-
O
O
O
-
O
O
O
U
-
U
O
U
U
-
U
O
O
U
-
U
U
U
-
U
O
U
U
-
U
O
U
U
-
U
U
U
-
Timer  
U
U
-
Flash  
ISO sensitivity  
Macro  
-
-
-
-
-
-
-
-
-
U
-
U
-
U
-
U
-
Focus Area  
Face detection  
EV  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
U
-
U
-
-
-
-
-
-
-
-
-
ACB  
-
-
-
-
-
-
-
-
-
-
Metering  
White balance  
Drive  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Image adjust  
Sound Alive  
Digital zoom  
Intelli zoom  
OIS  
-
-
-
-
-
-
-
U
-
U
-
U
-
-
-
-
-
-
-
U
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
O
O
O
-
O
O
O
O
O
O
: In these modes, some options are limited or a certain option is set by default. O: The option is available in this mode.  
U
Shooting options 82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing photos or videos in Playback mode  
Learn how to play back photos or videos and how to manage files.  
Photo file information  
Starting Playback mode  
View photos or play videos stored in your camera.  
Memory in use  
File Information  
Press [  
P].  
1
The most recent file will be displayed.  
If the camera is off, it will turn on and display the most recent  
file.  
Press [  
F
/
t
] to scroll through files.  
2
Album/Zoom In  
Press and hold [  
F/t  
] to scroll through files quickly.  
Icon  
Description  
If you want to view files stored in the internal memory, remove your  
memory card.  
You may not be able to edit or play back files that were captured with  
other cameras, due to unsupported sizes (image size, etc) or codecs.  
Use a computer or another device to edit or play back these files.  
Current file/Total files  
Folder name–File name  
GIF file  
Protected file  
Print order has been set (DPOF)  
To display file information on the screen, press [  
D].  
Playback/Editing 84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Video file information  
Ranking your favorite faces  
You can rank your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
In Playback mode, press [  
Select Face List.  
Face List  
m].  
1
2
File Information  
Album  
Play  
Capture  
Icon  
Description  
Current file/Total files  
Folder name-File name  
Current playback time  
Video length  
Back  
Edit  
Press [o].  
3
4
5
6
Protected file  
Select Edit Ranking.  
Select a face, and then press [  
o].  
To display file information on the screen, press [  
D].  
Press [F  
/
t
] to change the ranking of the face, and then  
].  
press [m  
Playback/Editing 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Deleting favorite faces  
Viewing files by category in Smart Album  
You can delete your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
View files by category, such as date, face, or file type.  
In Playback mode, rotate [Zoom] to the left.  
1
In Playback mode, press [m].  
1
2
3
4
5
6
7
You can also access Smart Album by scrolling to <Album>  
on the Home screen, and then selecting  
.
Select Face List.  
Press [ ].  
m
2
3
Press [o].  
Select Filter a category.  
Select Cancel My Star.  
Filter  
All  
Select a face, and then press [  
o].  
Date  
Press [f].  
Face List  
File Type  
When the pop-up message appears, select Yes.  
Back  
Select  
Icon  
Description  
All: View files normally.  
Date: View files by the date they were saved.  
Face List: View files by recognized faces and favorite  
faces. (Up to 20 people)  
File Type: View files by the file type.  
Playback/Editing 86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Viewing files as thumbnails  
Scroll to a desired list, and then press [  
open the list.  
o
] to  
] to  
4
Scan thumbnails of files.  
In Playback mode, rotate [Zoom] to the left to view  
Scroll to a desired file, and then press [  
view the file.  
o
5
thumbnails (12 at a time). Rotate [Zoom] to the left  
once more to display more thumbnails (24 at a time).  
Rotate [Zoom] to the right to return to the previous  
view.  
Rotate [Zoom] to the left to return to the previous view.  
6
It may take some time for the camera to open Smart Album, change the  
category, or reorganize files.  
Menu  
You can also view files as thumbnails by scrolling to <Album>  
on the Home screen, and then selecting  
.
Press [  
D/c/F/t] to scroll through files.  
Playback/Editing 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Deleting multiple files  
Protecting files  
You can select multiple files, and then delete them at once.  
Protect your files from accidental deletion.  
In Playback mode, press [  
f
].  
In Playback mode, press [  
m].  
1
1
2
When in thumbnails view, press [  
m], select  
Select Protect On.  
Delete Select, and then skip to step 3, or press [  
select Select, and then skip to step 3.  
f],  
You cannot delete or rotate a protected file.  
When the pop-up message appears, select Multiple  
Delete.  
2
3
Scroll to each file you want to delete, and then  
Deleting files  
press [o].  
Select files to delete in Playback mode.  
Press [o] again to cancel your selection.  
Press [  
f].  
4
5
Deleting a single file  
You can select one file, and then delete it.  
When the pop-up message appears, select Yes.  
In Playback mode, select a file, and then press [  
f].  
1
When the pop-up message appears, select Yes.  
2
You can also delete files in Playback mode by pressing [m], and then  
selecting Delete Delete Yes.  
Playback/Editing 88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Deleting all files  
Viewing photos  
Enlarge part of a photo or view photos as a slide show.  
You can select all files, and then delete them at once.  
In Playback mode, press [  
m].  
1
Enlarging a photo  
When in thumbnails view, press [m], select  
Delete Delete All, and then skip to step 3, or press [  
f],  
select Delete All, and then skip to step 3.  
In Playback mode, rotate [Zoom] to the right to enlarge  
a portion of the photo. Rotate [Zoom] to the left to  
zoom out.  
Select Delete Delete All.  
2
3
When the pop-up message appears, select Yes.  
All unprotected files are deleted.  
Enlarged area  
Copying files to a memory card  
Copy files from the internal memory to a memory card.  
In Playback mode, press [  
m].  
1
2
Crop  
Select Copy to Card.  
Playback/Editing 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Viewing panoramic photos  
To  
Description  
View photos captured in Live Panorama mode.  
Move the enlarged area  
Press [D  
/
c
/F  
/t  
].  
Press [  
o
], and then select Yes.  
In Playback mode, press [  
panoramic photo.  
F/t] to scroll to a desired  
1
2
(The trimmed photo will be saved as a  
new file. The original photo is retained in its  
original form.)  
Trim the enlarged photo  
The entire panoramic photo appears on the screen.  
Press [ ].  
o
When you view photos that were captured by another camera, the zoom  
ratio may differ.  
The camera automatically scrolls through the photo from left to  
right for a horizontal panoramic photo and from top to bottom  
for a vertical panoramic photo. The camera then switches to  
Playback mode.  
While playing back a panoramic photo, press [  
or resume.  
o] to pause  
After you have paused the playback of a panoramic photo,  
press [ ] to move the photo horizontally or  
D
/c/F/t  
vertically, depending on the direction you moved when  
capturing the photo.  
Press [m] to return to Playback mode.  
3
The camera automatically scrolls through the panoramic photo only if the  
longest side of the photo is two or more times longer than the shortest side.  
Playback/Editing 90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Viewing animated photos  
Playing a slide show  
View animated GIF files repeatedly that were captured in Motion  
Photo mode or Jump Shot mode.  
Apply effects and audio to a slide show of your photos.  
The slide show function does not work for videos and GIF files.  
In Playback mode, press [  
GIF file.  
F
/
t
] to scroll to a desired  
In Playback mode, press [m].  
1
2
3
1
2
3
Select Slide Show Options.  
Press [o].  
Select a slide show effect option.  
The GIF file plays back repeatedly.  
Skip to step 4 to start a slide show with no effects.  
* Default  
Press [ ] to return to Playback mode.  
o
Option  
Description  
Set whether or not to repeat the slide show.  
(One Play*, Repeat)  
Play Mode  
Set the interval between photos.  
(1 sec*, 3 sec, 5 sec, 10 sec)  
Interval  
Music  
You must set the Effect option to Off to set the  
interval.  
Set background audio.  
Set a scene change effect between photos.  
(Off, Calm*, Shine, Relax, Lively, Sweet)  
Effect  
Select Off to cancel effects.  
When you use the Effect option, the interval  
between photos will be set to 1 second.  
Playback/Editing 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Press [  
m].  
4
5
6
Playing a video  
In Playback mode, you can view a video, and then capture or trim  
parts of the playing video. You can save the captured or trimmed  
segments as new files.  
Select Start Slide Show.  
View the slide show.  
Press [  
o
] to pause the slide show.  
In Playback mode, select a video, and then press [  
o
].  
1
2
Press [  
o] again to resume the slide show.  
View the video.  
Press [  
to Playback mode.  
Rotate [Zoom] to the left or right to adjust the volume level.  
o], and then press [F/t] to stop the slide show and return  
Current playback time/  
Video length  
Pause  
Stop  
To  
Description  
Press [ ]. Each time you press [  
you change the scan speed in this  
order: 2X, 4X, 8X.  
F
F
],  
Scan backward  
Pause or resume  
playback  
Press [o  
].  
Press [t  
]. Each time you press [  
t
],  
Scan forward  
you change the scan speed in this  
order: 2X, 4X, 8X.  
Adjust the volume level  
Rotate [Zoom] to the left or right.  
Playback/Editing 92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Trimming a video  
Capturing an image from video  
In Playback mode, select a video, and then press  
While viewing a video, press [o] at the point where you  
want to capture an image.  
1
1
[
m
].  
Select Trim Movie.  
Press [ ].  
c
2
3
4
2
Press [  
o
] to start playing the video.  
] [ ] at the point where you want the  
The resolution of the captured image will be the same as the original  
video.  
The captured image is saved as a new file.  
Press [o  
c
trimming to begin.  
Press [  
o
] to resume playing the video.  
] [ ] at the point where you want the  
5
6
Press [o  
c
trimming to end.  
Press [ ] to trim.  
When the pop-up message appears, select Yes.  
c
7
8
The original video should be at least 10 seconds long.  
The camera will save the edited video as a new file and leave the  
original video intact.  
Playback/Editing 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Learn how to edit photos.  
The camera will save edited photos as new files.  
When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to  
a lower resolution.  
Resizing photos  
Change the size of a photo and save it as a new file.  
Cropping portraits automatically  
Extract and save close-up portraits from landscape shots.  
In Playback mode, select a photo, and then  
In Playback mode, select a photo, and then press  
1
1
press [m].  
[
m
].  
Select Resize.  
Select Intelligent Portrait.  
2
3
2
The camera detects the face of a subject, crops the photo  
around the face, and then saves 2 cropped photos under  
consecutive file names.  
Select an option.  
Resize  
2592 X 1944  
1984 X 1488  
1024 X 768  
Back  
Select  
The Intelligent Portrait feature will not function if:  
-
-
-
no face is detected  
more than 2 faces are detected  
the detected facial area is larger than a certain ratio  
Available resize options differ depending on the original size of the photo.  
Playback/Editing 94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Rotating a photo  
Applying Smart Filter effects  
Apply special effects to your photos.  
On the Home screen, scroll to <Album>.  
1
On the Home screen, scroll to <Album>.  
1
Select  
.
2
3
4
5
Select  
.
2
3
4
Rotate [Zoom] to the left, and then select a photo.  
Rotate [Zoom] to the left, and then select a photo.  
Select Rotate an option.  
Select Smart Filter an option.  
Press [c] to save.  
Smart Filter : Miniature  
Rotate : Right 90˚  
Back  
Set  
Cancel  
Save  
Option  
Description  
The camera will overwrite the original file.  
Normal  
No effect  
In Playback mode, press [m], and then select Rotate to rotate  
Apply a tilt-shift effect to make the subject  
appear in miniature.  
a photo.  
Miniature  
Apply the retro-looking colors, high contrast, and  
strong vignette effect of Lomo cameras.  
Vignetting  
Playback/Editing 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Option  
Description  
Adjusting your photos  
Learn how to adjust the brightness, contrast, or saturation or how  
to correct the red-eye effect. If the center of a photo is dark, you  
can adjust it to be brighter. The camera will save an edited photo  
as a new file, but may convert it to a lower resolution.  
Ink Painting  
Oil Painting  
Cartoon  
Apply a watercolor painting effect.  
Apply an oil painting effect.  
Apply a cartoon painting effect.  
Add lines that radiate outward from bright  
objects to imitate the visual effect of a cross  
filter.  
You can adjust brightness, contrast, and saturation and apply Smart  
Filter effects at the same time.  
You cannot apply the ACB, Face Retouch, and Red-eye Fix effects  
at the same time.  
Cross Filter  
Sketch  
Apply a pen sketch effect.  
Hide facial imperfections or apply dreamy  
effects.  
Soft Focus  
Distort close objects to imitate the visual effect  
of a fisheye lens.  
Adjusting brightness, contrast, or saturation  
Fish-eye  
Old Film  
Half Tone Dot  
Classic  
Apply a vintage film effect.  
Apply a halftone effect.  
On the Home screen, scroll to <Album>.  
1
2
3
4
Select  
.
Apply a black and white effect.  
Apply a sepia tone effect.  
Rotate [Zoom] to the left, and then select a photo.  
Retro  
Blur the edges of a photo to emphasize the  
subjects in the center.  
Select an adjusting option.  
Zooming Shot  
Icon  
Description  
Brightness  
Contrast  
Press [c] to save.  
5
Saturation  
Playback/Editing 96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Retouching faces  
Press [  
Press [  
Press [  
F/t] to adjust the option.  
5
6
7
o
].  
On the Home screen, scroll to <Album>.  
1
2
3
4
5
c
] to save.  
Select  
.
Rotate [Zoom] to the left, and then select a photo.  
Adjusting dark subjects (ACB)  
Select Face Retouch.  
On the Home screen, scroll to <Album>.  
1
2
3
4
5
Press [F/t] to adjust the option.  
As the number increases, the skin tone becomes brighter and  
smoother.  
Select  
.
Rotate [Zoom] to the left, and then select a photo.  
Press [c] to save.  
6
Select ACB.  
Press [c] to save.  
Removing red-eye  
On the Home screen, scroll to <Album>.  
1
2
3
4
5
Select  
.
Rotate [Zoom] to the left, and then select a photo.  
Select Red-eye Fix.  
Press [c] to save.  
Playback/Editing 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing a photo  
Creating a print order (DPOF)  
Select photos to print and save print options in the Digital Print  
Order Format (DPOF). This information is saved in the MISC  
folder on your memory card for convenient printing on DPOF-  
compatible printers.  
In Playback mode, select a photo you want to print,  
1
and then press [m].  
Select DPOF.  
2
3
Press [D/c  
] to select the number of copies,  
and then press [  
o
].  
You can take the memory card to a print shop that supports DPOF  
(Digital Print Order Format) or you can print photos directly through a  
DPOF-compatible printer at home.  
Photos with dimensions that are wider than the paper may be cut off  
on the left and right edges. Ensure that your photo dimensions are  
compatible with the paper you select.  
You cannot set DPOF options for photos stored in the internal  
memory.  
If you specify the print size, you can print photos only with  
DPOF 1.1-compatible printers.  
Playback/Editing 98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing files on a TV  
Play back photos or videos by connecting your camera to a TV with the A/V cable.  
On the Home screen, scroll to <Basic>.  
Turn on your TV, and then select the A/V video source  
with the TV remote control.  
1
2
3
4
7
8
Select  
.
Turn on your camera.  
Select Connectivity Video Out.  
The camera automatically enters into Playback mode when  
you connect it to a TV.  
Select the video signal output for your country or region.  
(p. 131)  
View photos or play videos using the camera buttons.  
9
Turn off your camera and TV.  
5
6
Depending on the TV model, you may see some digital noise or part  
of an image may not appear.  
Images may not be centered on the TV screen depending on your  
TV settings.  
Connect your camera to your TV with the A/V cable.  
Audio  
Video  
Playback/Editing 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transferring files to your Windows computer  
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.  
Requirements  
The requirements are recommendation only. Intelli-studio may not work  
properly even when the computer meets the requirements, depending  
on the condition of your computer.  
If your computer does not meet the requirements, videos may not play  
correctly or it may take longer to edit videos.  
Item  
CPU  
Requirements  
Intel® Pentium®4 3.2 GHz or higher/  
AMD Athlon™ FX 2.6 GHz or higher  
Install DirectX 9.0c or later before you use Intelli-studio.  
Your computer must be running Windows XP, Windows Vista, or  
Windows 7 for you to connect the camera as a removable disk.  
RAM  
OS*  
Minimum 512 MB RAM (1 GB or more recommended)  
Windows XP SP2, Windows Vista, or Windows 7  
Hard disk  
capacity  
250 MB or more (1 GB and above recommended)  
The manufacturer is not responsible for any damage that results from using  
unqualified computers such as a computer you assembled yourself.  
CD-ROM drive  
1024 X 768 pixels, 16-bit color display compatible  
monitor (1280 X 1024 pixels, 32-bit color display  
recommended)  
Others  
USB 2.0 port  
nVIDIA Geforce 7600GT or higher/  
ATI X1600 series or higher  
Microsoft DirectX 9.0c or higher  
* A 32-bit version of Intelli-studio will be installed—even on 64-bit editions of  
Windows XP, Windows Vista, and Windows 7.  
100  
Download from Www.SomanPulaaylbsa.ccko/mEd.itinAgll Manuals Search And Download.  
   
Transferring files to your Windows computer  
Turn on the camera.  
Transferring files with Intelli-studio  
6
7
When the Intelli-studio installation pop-up appears on the  
computer screen, follow the on-screen instructions to  
complete the installation.  
You can download Intelli-studio from the linked webpage and  
install it on your computer. When you connect the camera to  
a computer with Intelli-studio installed, the program will launch  
automatically.  
Once the Intelli-studio is installed on your computer, the  
computer recognizes the camera and launches the  
Intelli-studio automatically.  
The battery will charge while the camera is connected to a computer with the  
USB cable.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
On the Home screen, scroll to <Basic>.  
1
Select a destination folder on your computer, and then  
select Yes.  
Select  
.
2
3
4
5
Select Connectivity PC Software On.  
New files stored on the camera will automatically transfer to  
the selected folder.  
If your camera has no new files, the pop-up window for saving  
new files will not appear.  
Turn off the camera.  
Connect the camera to your computer with the USB  
cable.  
For Windows Vista and Windows 7, select Run iLinker.exe from the  
Auto Play window to start Intelli-studio. If Run iLinker.exe does not appear on  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
the computer, click  
Computer Intelli-studio, and then follow the  
on-screen instructions to complete the Intelli-studio installation.  
101  
Download from Www.SomanPulaaylbsa.ccko/mEd.itiAngll Manuals Search And Download.  
 
Transferring files to your Windows computer  
Using Intelli-studio  
Intelli-studio allows you to play back and edit files. For details, select Help Help from the program toolbar.  
You can update the firmware of your camera by selecting Web Support Upgrade firmware for the connected device from the program toolbar.  
You can download short animations for use in Children mode.  
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.  
Intelli-studio supports the following formats:  
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)  
Photos: JPG, GIF, BMP, PNG, TIFF  
1
2
3
4
5
6
7
8
^
:
9
$
0
!
@
#
102  
Download from Www.SomanPulaaylbsa.ccko/mEd.itiAngll Manuals Search And Download.  
 
Transferring files to your Windows computer  
No.  
Description  
Transferring files by connecting the camera  
as a removable disk  
1
Open menus.  
2
3
4
Display files in the selected folder.  
Switch to the Photo edit mode.  
Switch to the Video edit mode.  
Connect the camera to your computer as a removable disk.  
On the Home screen, scroll to <Basic>.  
1
Select  
.
Switch to the Sharing mode (to send files by email or  
upload files to websites, such as Flickr or YouTube).  
2
3
4
5
5
Select Connectivity PC Software Off.  
6
7
8
9
0
!
@
#
$
:
Download short animations for use in Children mode.  
Enlarge or reduce the thumbnails in the list.  
Select a file type.  
Turn off the camera.  
Connect the camera to your computer with the USB  
cable.  
View files in the selected folder on your computer.  
Show or hide files on the connected camera.  
View files in the selected folder on the camera.  
View files as thumbnails or on a map.  
Browse folders stored on the camera.  
Browse folders stored on your computer.  
Move to the previous or next folder.  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
Print files, view files on a map, store files in My Folder, or  
register faces.  
^
103  
Download from Www.SomanPulaaylbsa.ccko/mEd.itiAngll Manuals Search And Download.  
 
Transferring files to your Windows computer  
Turn on the camera.  
6
Disconnecting the camera (for Windows XP)  
With Windows Vista and Windows 7, the methods for  
disconnecting the camera are similar.  
The computer recognizes the camera automatically.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
Verify that the status lamp is not blinking.  
1
The status lamp blinks when transferring files. Wait until it  
stops.  
On your computer, select My Computer Removable  
7
8
Disk DCIM 100PHOTO.  
Click  
computer screen.  
on the tool bar at the bottom right of your  
2
Drag or save files to your computer.  
Click the pop-up message.  
3
4
Click the message box that indicates the camera can be  
removed safely.  
Remove the USB cable.  
5
The camera may not disconnect safely while Intelli-studio is running. End the  
program before disconnecting the camera.  
104  
Download from Www.SomanPulaaylbsa.ccko/mEd.itiAngll Manuals Search And Download.  
 
Transferring files to your Mac computer  
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly  
from the camera to the computer without installing any programs.  
Mac OS 10.4 or later is supported.  
Connect your camera to a Macintosh computer with the  
USB cable.  
Turn on the camera.  
1
2
The computer recognizes the camera automatically and  
displays a removable disk icon.  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
Double-click the removable disk icon.  
Drag or save files to your computer.  
3
4
105  
Download from Www.SomanPulaaylbsa.ccko/mEd.itinAgll Manuals Search And Download.  
 
Printing photos with a PictBridge photo printer  
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.  
Configuring print settings  
On the Home screen, scroll to <Basic>.  
1
2
3
4
Select  
.
Press [  
m
] to configure print settings.  
Select Connectivity USB Printer.  
Print  
Size  
Turn on the printer, and then connect your camera to the  
printer with the USB cable.  
Layout  
Type  
Quality  
Date Print  
Exit  
Select  
Option  
Print  
Description  
Select whether to print the current photo or all photos.  
Set the print size.  
If the camera is off, press [POWER] or [  
P
] to turn it on.  
5
6
Size  
The printer recognizes the camera automatically.  
Set the number of photos to be printed on a single  
sheet of paper.  
Layout  
Press [ ] to select a file to print.  
F/t  
Press [ ] to set printing options.  
m
Type  
Set the type of paper.  
See “Configuring print settings.”  
Press [ ] to print.  
Printing starts. Press [o] to cancel printing.  
Quality  
Date Print  
File Name  
Reset  
Set the print quality.  
o
Set to print the date.  
7
Set to print the file name.  
Reset settings to their default values.  
Some options may not be supported by some printers.  
106  
Download from Www.SomanPulaaylbsa.ccko/mEd.itinAgll Manuals Search And Download.  
 
Wireless network  
(DV300F/DV305F only)  
Learn to connect to wireless local area networks (WLANs) and use functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a WLAN and configuring network settings  
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.  
Icon  
Description  
Connecting to a WLAN  
Ad hoc AP  
On the Home screen, scroll to <Wi-Fi>.  
1
Secured AP  
Select  
,
,
,
, or  
.
2
3
WPS AP  
Signal strength  
Press [  
m
], and then select Wi-Fi Setting.  
In some modes, press [m] or follow the on-screen  
Press [t] to open network setting options.  
instructions until the Wi-Fi Setting screen appears.  
The camera automatically searches for available AP devices.  
When you select a secured AP, a pop-up window appears.  
Enter the required passwords to connect to the WLAN. For  
information about entering text, refer to "Entering text". (p. 111)  
When a login page appears, refer to "Using the login browser".  
(p. 109)  
When you select an unsecured AP, the camera will connect to  
the WLAN.  
If you select a WPS profile supported AP, select WPS PIN,  
and then enter a PIN on the AP device. You can also connect  
to a WPS profile supported AP by selecting WPS PBC on the  
camera, and then pushing the WPS button on the AP device.  
Select an AP.  
4
Wi-Fi Setting  
Samsung 1  
Samsung 2  
Samsung 3  
Samsung 4  
Samsung 5  
Back  
Select  
Select WPS PBC to connect to a WPS AP.  
Select Refresh to refresh connectable APs.  
Select Add wireless network to add an AP manually.  
Wireless network (DV300F/DV305F only) 108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a WLAN and configuring network settings  
Setting network options  
Using the login browser  
You can enter your login information via the login browser when  
connecting to some APs, sharing sites, or cloud servers.  
In the Wi-Fi Setting screen, move to an AP,  
1
and then press [t].  
Button  
Description  
Select each option, and then enter the required  
information.  
2
[
[
D
/c/F/t]  
Move to an item or scroll the page.  
Select an item.  
o
]
Option  
Description  
Access the following options:  
Authentication  
Data Encryption  
Network Password  
IP Setting  
Select a network authentication type.  
Select an encryption type.  
Enter the network password.  
Set the IP address manually.  
Previous Page: Move to the previous page.  
Next Page: Move to the next page.  
Reload: Reload the page.  
[
[
m
]
Stop: Stop loading the page.  
Exit: Close the login browser.  
f
]
Close the login browser.  
Manually setting the IP address  
You cannot select some items depending on the page you connected  
to. This does not indicate a malfunction.  
The login browser may not close automatically after you log into some  
In the Wi-Fi Setting screen, move to an AP,  
1
and then press [t].  
pages. If this occurs, close the login browser by pressing [  
then proceed with the desired operation.  
It may take longer to load the login page due to the page size or  
network speed. If this occurs, wait until the login information input  
window appears.  
f], and  
Select IP Setting Manual.  
2
3
Select each option, and then enter the required  
information.  
Option  
Description  
IP  
Enter the static IP address.  
Enter the subnet mask.  
Enter the gateway.  
Subnet Mask  
Gateway  
DNS Server  
Enter the DNS address.  
Wireless network (DV300F/DV305F only) 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a WLAN and configuring network settings  
If you cannot connect to a WLAN, try another AP from the  
available AP list.  
Network connection tips  
The quality of the network connection will be determined by  
You can also connect to free WLANs in some foreign countries.  
the AP.  
A login page may appear when you select free WLANs  
provided by some network service providers. Enter your ID  
and password to connect to the WLAN. For information about  
registering or the service, contact the network service providers.  
The further the distance between your camera and the AP, the  
longer it will take to connect to the network.  
If a nearby device is using the same radio frequency signal as  
your camera, it may interrupt your connection.  
Be cautious when you enter personal information for an AP  
connection. Do not enter any payment or credit card information  
on your camera. The manufacturer is not liable for any problem  
caused by entering such information.  
If your AP name is not in English, the camera may not be able  
to locate the device or the name may appear incorrectly.  
For network settings or a password, contact your network  
administrator or network service provider.  
Available network connections may differ by country.  
If a WLAN requires authentication from the service provider,  
you may not be able to connect to it. To connect the WLAN,  
contact your network service provider.  
The WLAN feature of your camera must comply with radio  
transmission laws in your region. To ensure compliance, use  
the WLAN feature only in the country where you purchased the  
camera.  
Depending on the encryption type, the number of digits in the  
password may differ.  
The process for adjusting network settings may differ,  
depending on network conditions.  
A WLAN connection may not be possible in all surroundings.  
The camera may display a WLAN enabled printer on the AP  
List. You cannot connect to a network via a printer.  
Do not access a network that you are not authorized to use.  
Before you connect to a network, ensure your battery is fully  
charged.  
You cannot connect your camera to a network and a TV  
simultaneously. Also, you cannot view photos or videos on a TV  
while connected to a network.  
When a DHCP server is not available you must make an autoip.  
txt file and copy it to the inserted memory card to connect to  
the network using Auto IP.  
Connecting to a network may incur additional charges. Costs  
will vary based on the conditions of your contract.  
Wireless network (DV300F/DV305F only) 110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a WLAN and configuring network settings  
Entering text  
Icon  
Description  
Learn how to enter text. The icons in the table below let you move  
the cursor, change the case, etc. Press [D/c/F/t] to move  
to a desired key, and then press [o] to enter the key.  
Switch between Symbol mode and ABC mode.  
Enter a space.  
Done Save the displayed text.  
View the entering text guide.  
You can use only the English alphabet, regardless of the display  
language.  
To move to Done directly, press [  
You can enter up to 64 characters.  
P].  
Done  
Back  
Backspace  
Icon  
Description  
Delete the last letter.  
Move the cursor.  
In ABC mode, change the case.  
Enter ".com".  
Wireless network (DV300F/DV305F only) 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sending photos or videos to a smart phone  
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your  
smart phone.  
The MobileLink feature is supported by Galaxy S smart phones with the Android 2.2 OS or higher. If your smart phone uses the Android 2.1 OS, upgrade your  
smart phone to Android 2.2 or higher. This feature is also supported by the 7 and 10.1 inch Galaxy Tab. This feature may be supported by other devices with  
Android 2.2 or higher, but Samsung makes no guarantee of its functionality.  
You should install the Samsung MobileLink application on your phone or device before using this feature. You can download the application from Samsung Apps or  
Android market.  
When there are no files in the camera memory, you cannot use this feature.  
You can view up to 1,000 files and send up to 100 files at a time.  
On the camera's Home screen, scroll to <Wi-Fi>.  
On the smart phone, select files to send from the camera  
to the smart phone.  
1
2
5
6
On the camera, select  
If the pop-up message that prompts you to download the  
application appears, select OK.  
.
On the smart phone, select Copy.  
The camera will send the files.  
On the smart phone, turn on the Samsung MobileLink  
application.  
3
4
Read the on-screen instructions carefully to select and  
connect to your camera.  
The smart phone can connect to only one camera at a time.  
On the camera, select OK.  
Wireless network (DV300F/DV305F only) 112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using a smart phone as a remote shutter release  
The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature.  
The captured photo will display on the smart phone.  
The Remote Viewfinder feature is supported by Galaxy S smart phones with the Android 2.2 OS or higher. If your smart phone uses the Android 2.1 OS, upgrade  
your smart phone to Android 2.2 or higher. This feature is also supported by the 7 and 10.1 inch Galaxy Tab. This feature may be supported by other devices with  
Android 2.2 or higher, but Samsung makes no guarantee of its functionality.  
You should install the Remote Viewfinder application on your phone or device before using this feature. You can download the application from Samsung Apps or  
Android market.  
On the camera's Home screen, scroll to <Wi-Fi>.  
On the smart phone, set the following shooting options.  
1
2
4
Icon  
Description  
On the camera, select  
If the pop-up message that prompts you to download the  
application appears, select OK.  
.
Flash option  
Timer option  
Photo size  
On the smart phone, turn on the Remote Viewfinder  
application.  
3
Read the on-screen instructions carefully to select and  
connect to your camera.  
The smart phone can connect to only one camera at a time.  
While using this feature, some buttons are not available on  
your camera.  
The zoom button and the shutter button on your smart phone  
will not function when using this feature.  
Remote Viewfinder mode supports the  
sizes only.  
and  
photo  
Wireless network (DV300F/DV305F only) 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using a smart phone as a remote shutter release  
On the smart phone, touch and hold  
to focus.  
5
The focus is automatically set to multi-AF.  
Release to capture the photo.  
The photo will be saved in your camera.  
6
Touch the photo in the bottom of the screen to save it to the  
smart phone. The photo will be resized to 640 X 360.  
When you use this feature, the ideal distance between the camera  
and the smart phone may vary, depending on your surroundings.  
The smart phone must be within 23 ft/7 m of the camera to use this  
feature.  
It will take some time to capture the photo after you release  
the smart phone.  
on  
The Remote Viewfinder function will deactivate when:  
-
-
-
-
-
there is an incoming call on the smart phone  
either the camera or the smart phone turn off  
the memory is full  
either device loses its connection to the WLAN  
the Wi-Fi connection is poor or unstable  
Wireless network (DV300F/DV305F only) 114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using photo or video sharing websites  
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera.  
Accessing a website  
Uploading photos or videos  
On the Home screen, scroll to <Wi-Fi>.  
Access the website with your camera.  
1
1
Select  
.
Scroll to the files you want to upload, and then  
2
3
2
press [o].  
Select a website.  
You can select up to 20 files. The total size must be  
The camera will automatically attempt to connect to a WLAN  
via the most recently connected AP device.  
10 MB or less.  
If the camera has not previously been connected to a WLAN,  
it will search for available AP devices. (p. 108)  
Select Upload.  
3
If you connected to Facebook, select Upload Upload.  
If you connected to Facebook, you can enter your comments  
by selecting the Comment box. For information about  
entering text, refer to "Entering text". (p. 111)  
Enter your ID and password, and then select Login.  
4
For information about entering text, refer to "Entering text".  
(p. 111)  
To select an ID from the list, select  
If you have previously logged in to the website, you may be  
logged in automatically.  
an ID.  
You must have an existing account on the file sharing website to use this  
feature.  
Wireless network (DV300F/DV305F only) 115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using photo or video sharing websites  
The maximum photo resolution you can upload is 2M, and the longest  
video you can upload is 30 seconds at resolution or a video  
recorded using . If the selected photo resolution is higher than  
2M, it will be automatically resized to a lower resolution.  
The method of uploading photos or videos may differ depending on  
the selected website.  
If you cannot access a website because of firewall or user  
authentication settings, contact your network administrator or network  
service provider.  
Uploaded photos or videos may be automatically titled with the date  
they were captured.  
The speed of your internet connection may affect how quickly photos  
upload or web pages open.  
When there are no files in the camera memory, you cannot use this  
feature.  
You can also upload photos or videos to file sharing websites in  
Playback mode by pressing [m], and then selecting Share(Wi-Fi)  
a desired website.  
Wireless network (DV300F/DV305F only) 116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending photos or videos via email  
You can change settings in the email menu, and send photos or videos stored on the camera via email.  
Select the Email box, enter your email address, and  
then select Done.  
Changing email settings  
In the email menu, you can change settings for storing your  
information. You can also set or change the email password. For  
information about entering text, refer to "Entering text". (p. 111)  
6
7
Select OK to save your changes.  
To delete your information, select Reset.  
Storing your information  
Setting an email password  
On the Home screen, scroll to <Wi-Fi>.  
1
On the Home screen, scroll to <Wi-Fi>.  
Select  
Press [  
.
1
2
3
4
2
3
4
5
Select  
Press [  
.
m
].  
m
].  
Select Sender Setting.  
Select Setting Password On.  
To deactivate the password, select Off.  
Select the Name box, enter your name, and then  
select Done.  
When the pop-up appears, press [  
o
].  
The pop-up disappears automatically even if you do not  
press [ ].  
5
Sender Setting  
Name  
o
Email  
Enter a 4-digit password.  
6
7
8
Enter the password again.  
OK  
Reset  
Back  
When the pop-up appears, press [  
o
].  
The pop-up disappears automatically even if you do not  
press [o].  
Wireless network (DV300F/DV305F only) 117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sending photos or videos via email  
Sending photos or videos via email  
You can send photos or videos stored on the camera via email.  
For information about entering text, refer to "Entering text".  
(p. 111)  
If you lost your password, you can reset it by selecting Reset on the  
password setting screen. When you reset the information, previously saved  
user’s setting information, email address, and recently sent email list will be  
deleted.  
On the Home screen, scroll to <Wi-Fi>.  
1
Select  
.
2
3
Changing the email password  
Select the Name(Email) box, enter your email address,  
and then select Done.  
On the Home screen, scroll to <Wi-Fi>.  
1
If you have previously saved your information, it will be inserted  
automatically. (p. 117)  
To use an address from the list of previous senders, select  
an address.  
Select  
Press [  
.
2
3
4
5
6
7
8
m
].  
Select Change Password.  
Select the Receiver box, enter an email address, and  
then select Done.  
4
5
Enter your current 4-digit password.  
Enter a new 4-digit password.  
Enter the new password again.  
To use an address from the list of previous recipients, select  
an address.  
Select  
30 recipients.  
Select to delete an address from the list.  
to add additional recipients. You can input up to  
When the pop-up appears, press [  
The pop-up disappears automatically even if you do not  
press [ ].  
o].  
Select Next.  
o
Wireless network (DV300F/DV305F only) 118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending photos or videos via email  
Scroll to files to send, and then press [  
o].  
6
Even if a photo appears to have transferred successfully, errors with  
the recipient’s email account may cause the photo to be rejected or  
recognized as spam.  
You can select up to 20 files. The total size must be  
10 MB or less.  
You may not be able to send an email if no network connection is  
available or if your email account settings are incorrect.  
The maximum photo resolution you can send is 2M and the longest  
Select Next.  
7
8
Select the Comment box, enter your comments,  
and then select Done.  
video you can upload is 30 seconds at  
resolution or a video  
recorded using . If the selected photo resolution is higher than  
2M, it will be automatically resized to a lower resolution.  
If you cannot send an email because of firewall or user authentication  
settings, contact your network administrator or network service  
provider.  
When there are no files in the camera memory, you cannot use this  
feature.  
Select Send.  
9
The camera will automatically attempt to connect to a WLAN  
via the most recently connected AP device and send the  
email.  
You can also send an email in Playback mode by pressing [  
m],  
If the camera has not previously been connected to a WLAN,  
it will search for available AP devices. (p. 108)  
and then selecting Share(Wi-Fi) Email.  
Wireless network (DV300F/DV305F only) 119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uploading photos to a cloud server  
You can upload your photos to SkyDrive. To upload photos, you must visit the Microsoft website and register before connecting your  
camera.  
On the camera's Home screen, scroll to <Wi-Fi>.  
Login with your ID and password.  
1
2
4
For information about entering text, refer to  
"Entering text". (p. 111)  
Select  
You can change the uploading photo size by pressing  
], and then selecting Upload Image Size.  
.
If you connected to SkyDrive, refer to  
"Using the login browser". (p. 109)  
[
m
Select SkyDrive.  
3
Scroll to the photos you want to upload, and then  
5
6
If the pop-up message that prompts you to create an account  
appears, select OK.  
The camera will attempt to connect to a WLAN via the most  
recently connected AP.  
If the camera has not previously been connected to a WLAN,  
it will search for available AP devices. (p. 108)  
press [o].  
Select Upload.  
You can also upload photos to a cloud server in Playback mode by  
pressing [ ], and then selecting Share(Wi-Fi) a cloud server.  
When there are no photos in the camera memory, you cannot use  
this feature.  
When you upload photos to SkyDrive, they will be resized to 2M while  
maintaining its aspect ratio.  
m
Wireless network (DV300F/DV305F only) 120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Auto Backup to send photos or videos  
You can send photos or videos that you captured with the camera to a PC wirelessly. The Auto Backup feature works only with the  
Windows OS.  
Installing the program for Auto Backup on  
your PC  
Sending photos or videos to a PC  
On the camera's Home screen, scroll to <Wi-Fi>.  
1
Install Intelli-studio on the PC. (p. 101)  
1
Select  
.
2
You must configure the backup PC information to use the  
Auto Backup feature. For more details, refer to  
Connect the camera to the PC with the USB cable.  
2
Click OK on the pop-up window.  
“Installing the program for Auto Backup on your PC”. (p. 121)  
3
The Auto Backup program is installed on the PC.  
Press [m] to set options.  
3
4
Follow the on-screen instructions to complete the installation  
To turn off your PC automatically after the transfer is complete,  
select Shut down PC after backup On.  
Remove the USB cable.  
4
5
Press [o  
] to start the backup.  
Connect the camera to the PC again with the USB  
cable.  
To cancel sending, press [ ].  
o
You cannot select individual files to backup. This function  
backs up only new files on the camera.  
The camera stores information about the PC, so that the  
camera can send files to the PC.  
The backup's progress will be shown on the PC monitor.  
When the transfer is completed, the camera will turn off  
automatically in approximately 30 seconds. Select Cancel  
to return to the previous screen and prevent the camera from  
turning off automatically.  
Before installing the program, ensure that the PC is connected to a network.  
If no internet connection is available, you must install the program from the  
provided CD.  
Wireless network (DV300F/DV305F only) 121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Auto Backup to send photos or videos  
If the PC supports the Wake on LAN (WOL) feature, you can turn on  
the PC automatically by searching for the PC from your camera.  
(p. 126)  
When you connect the camera to the WLAN, select the AP that is  
connected to the PC.  
The camera will search for available access points even if you are  
connecting to the same access point again.  
If you turn off the camera or remove the battery while sending files, the  
file transfer will be interrupted.  
While you are using this feature, only [POWER] is available on your  
camera.  
You can connect only one camera to the PC at a time for sending  
files.  
The backup may be canceled due to network conditions.  
Photos or videos can be sent to a PC one time only. Files cannot be  
sent again even if you reconnect your camera to another PC.  
When there are no files in the camera memory, you cannot use this  
feature.  
You must turn off Windows Firewall and any other firewalls before  
using this feature.  
You can send up to 1,000 files.  
On the PC software, the server name must be entered in the Latin  
alphabet and can contain no more than 48 characters.  
Wireless network (DV300F/DV305F only) 122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing photos or videos on a TV Link-enabled TV  
TV Link is a technology for sharing media files between a camera and TV connected to the same AP device. With this technology, you can  
view your photos or videos on a widescreen TV.  
On the Home screen, scroll to <Wi-Fi>.  
On the TV, search for the camera and browse the shared  
photos or videos.  
1
2
4
Select  
.
For information about searching for the camera and browsing  
the photos or videos on the TV, refer to the TV user manual.  
Videos may not play smoothly depending on the type of TV  
or network condition. If this happens, re-record the video  
If the guide message appears, press [o].  
The camera will automatically attempt to connect to a WLAN  
via the most recently connected AP device.  
If the camera has not previously been connected to a WLAN,  
it will search for available AP devices. (p. 108)  
in  
or  
quality and play it again. If videos do not  
play smoothly on your TV over the wireless connection, try  
connecting the camera to the TV with an A/V cable.  
Connect your TV to a wireless network via an AP device.  
3
Refer to your TV’s user manual for more information.  
AP  
Wireless network (DV300F/DV305F only) 123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos on a TV Link-enabled TV  
You can share up to 1,000 photos or videos.  
On a TV screen, you can view only photos or videos captured with  
your camera.  
The range of the wireless connection between your camera and a TV  
may vary depending on the specifications of the AP.  
If the camera is connected to 2 TVs, playback may be slower.  
Photos or videos will be shared in their original sizes.  
You can use this feature only with TV Link-enabled TVs.  
Shared photos or videos will not be stored on the TV, but they can be  
stored in the camera to meet the TV's specifications.  
Transferring photos or videos to the TV may take some time  
depending on the network connection, the number of files to be  
shared, or sizes of the files.  
If you power off the camera abnormally while viewing photos or videos  
on a TV (for example, by removing the battery), the TV considers the  
camera to still be connected.  
The order of photos or videos on the camera may be different than  
on the TV.  
Depending on the number of photos or videos you want to share, it  
may take some time to load your photos or videos and complete the  
initial set-up process.  
While viewing photos or videos on the TV, continuously using the TV  
remote or performing additional operations on the TV may prevent this  
feature from working properly.  
If you reorder or sort files on the camera while viewing them on a TV,  
you must repeat the initial set-up process to update the list of files  
on the TV.  
When there are no files in the camera memory, you cannot use this  
feature.  
Wireless network (DV300F/DV305F only) 124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending photos using Wi-Fi Direct  
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature  
may not be supported on some devices.  
On the device, turn on the Wi-Fi Direct option.  
1
On the camera, in Playback mode, scroll to a photo.  
2
Press [  
Wi-Fi Direct.  
m
], and then select Share(Wi-Fi) “  
3
When in the single image view, you can send only one photo  
at a time.  
When in the thumbnails view, you can select multiple photos  
by scrolling to thumbnails, and then pressing [  
Select Next when you are finished selecting photos.  
o].  
Select the device from the cameras list of Wi-Fi Direct  
devices.  
4
5
Ensure that the device's Wi-Fi Direct option is turned on.  
You can also select your camera from the device's list of  
Wi-Fi Direct devices.  
On the device, allow the camera to connect to the  
device.  
The photo will be sent to the device.  
When there are no photos in the camera memory, you cannot use  
this feature.  
If you cancel the connection attempt before it is complete, the camera  
may not be able to reconnect to the device. In this case, update your  
device with the latest firmware.  
Wireless network (DV300F/DV305F only) 125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About the Wake on LAN (WOL) feature  
With the WOL feature, you can automatically turn on or wake up a PC with your camera. This feature has been available for Samsung  
desktop PCs for the last 5 years (not available for all-in-one PCs).  
Any changes to your PC’s BIOS settings other than the ones described below may damage your PC. The manufacturer is not responsible for damage caused by your changing  
your PC’s BIOS settings.  
Setting the PC to wake up from sleep mode  
Click Start, and then open the Control Panel.  
Right click Local Area, and then click Properties.  
1
2
3
4
Configure the network connection.  
Click Configure the Power manage tab Allow this  
device to wake the computer.  
Windows 7:  
Click Network and Internet Network and Sharing  
Center Change adapter settings.  
Windows Vista:  
Click Network and Internet Network and Sharing  
Center Manage network connections.  
Windows XP:  
Click OK.  
5
6
Restart the PC.  
Click Network and Internet Connection Network  
Connection.  
Wireless network (DV300F/DV305F only) 126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About the Wake on LAN (WOL) feature  
Setting the PC to turn on  
Select the drivers for the network adapter.  
Turn on the PC, and then press F2 while the PC is  
booting.  
7
8
1
Click the Advanced tab, and then set the WOL menus.  
The BIOS setting menu will appear.  
You cannot use this feature across a firewall or if a security program has  
been installed.  
Select Advanced tab Power management Setup.  
2
3
4
To turn on the PC with the WOL feature, the PC must have an active  
connection to the LAN. Ensure that the indicator light on the PC’s LAN  
port is on indicating that the LAN connection is active.  
Depending on your PC model, the camera may only be able to wake  
the PC.  
Select Resume on PME Enabled.  
Press F10 to save your changes, and then continue  
booting.  
Depending on your PC’s OS or drivers, the names of the WOL setting  
menu may vary.  
Click Start, and then open the Control Panel.  
5
6
-
-
examples of setting menu names: Enable PME, Wake on LAN, etc.  
examples of setting menu values: Enable, Magic packet, etc.  
Configure the network connection.  
Windows 7:  
Click Network and Internet Network and Sharing  
Center Change adapter settings.  
Windows Vista:  
Click Network and Internet Network and Sharing  
Center Manage network connections.  
Windows XP:  
Click Network and Internet Connection “  
Network Connection.  
Wireless network (DV300F/DV305F only) 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu  
Learn to configure your camera's settings.  
Select an item.  
Accessing the settings menu  
4
5
Sound  
On the Home screen, scroll to <Basic>.  
1
Volume  
Medium  
On  
Select  
.
2
3
Beep Sound  
Shutter Sound  
Start Sound  
Sound 1  
Off  
Select a menu.  
Settings  
Sound  
AF Sound  
Back  
On  
Select  
Display  
Connectivity  
General  
Select an option.  
Volume  
Off  
Low  
Option  
U
Description  
Medium  
High  
Sound: Set various camera sounds and the volume.  
(p. 130)  
Y
Display: Customize the display settings. (p. 130)  
Back  
Select  
Connectivity: Set the connection options. (p. 131)  
General: Change the settings for the camera system  
such as memory format and default file name. (p. 132)  
Press [m] to return to the previous screen.  
6
129  
Download from Www.SomanualSse.cttoinmgs. All Manuals Search And Download.  
 
Settings menu  
Sound  
Display  
* Default  
* Default  
Item  
Description  
Item  
Description  
Set the volume of all sounds.  
(Off, Low, Medium*, High)  
Set a start image to display when the camera  
turns on.  
Volume  
Off*: Display no start image.  
Set to emit a sound when you press the buttons  
or switch modes. (Off, On*)  
Beep Sound  
Logo: Display a default image stored in the  
internal memory.  
Set the sound the camera emits when you press  
the shutter button.  
(Off, Sound 1*, Sound 2, Sound 3)  
User Image: Select User Image from the  
photos you captured in the memory.  
Shutter Sound  
Start Image  
The camera will save only one User Image in  
the internal memory at a time.  
If you select a new photo as a User Image or  
reset your camera, the camera will delete the  
current image.  
Set the sound the camera emits when you turn on  
your camera.  
(Off*, Star Flight, Laser Show, Cloud)  
Start Sound  
AF Sound  
Set to emit a sound when you half-press the  
shutter button. (Off, On*)  
Set wallpaper for the Home screen with the  
desired image. (Wallpaper Gallery, Album)  
Wallpapers  
Guide Line  
Select a guide to help you compose a scene.  
(Off*, 3 X 3, 2 X 2, Cross, Diagonal)  
Date/Time  
Display  
Set whether or not to display the date and time on  
the camera's display. (Off*, On)  
Help Guide  
Display  
Display a brief description of an option or menu.  
(Off, On*)  
Settings 130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings menu  
* Default  
Connectivity  
Item  
Description  
* Default  
Adjust the brightness of the screen.  
(Auto*, Dark, Normal, Bright)  
Item  
Description  
Display  
Brightness  
Set the video signal output for your region.  
Mexico  
Normal is fixed in Playback mode even if you have  
selected Auto.  
NTSC: USA, Canada, Japan, Korea, Taiwan,  
Set whether or not to review a captured image  
before returning to the Shooting mode. (Off, On*)  
PAL (supports only BDGHI): Australia, Austria,  
Belgium, China, Denmark, England, Finland,  
France, Germany, Italy, Kuwait, Malaysia,  
Netherlands, New Zealand, Norway, Singapore,  
Spain, Sweden, Switzerland, Thailand  
Quick View  
Power Save  
Video Out  
If you perform no operations for 30 seconds, the  
camera automatically switches to Power save  
mode. (Off*, On)  
In Power save mode, press any button other  
than [POWER] to resume using the camera.  
Even if you do not set the Power save mode,  
the screen will dim 30 seconds after the last  
operation to save power.  
Select the mode to use when you connect the  
camera to a computer or printer with a USB cable.  
Computer*: Connect your camera to a  
computer for transferring files.  
USB  
Printer: Connect your camera to a printer for  
printing files.  
Select Mode: Manually select the USB mode  
when you connect your camera to a device.  
Set Intelli-studio to launch automatically when you  
connect your camera to your computer. (Off, On*)  
PC Software  
Settings 131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings menu  
* Default  
General  
Item  
Description  
* Default  
Specify how to name files.  
Item  
Description  
Reset: Set the file number to start from  
0001 when you insert a new memory card,  
format a memory card, or delete all files.  
Device Information  
(DV300F/DV305F only)  
See the Mac address and serial number of  
your camera.  
Language  
Set a language for the display text.  
Series*: Set the file number to resume from  
the previous file number when you insert a  
new memory card, format a memory card,  
or delete all files.  
Set the time zone for your location. When  
you travel to another country, select Visit,  
and then select the appropriate time zone.  
(Home*, Visit)  
Time Zone  
Date/Time Set  
The default name of the first folder is  
100PHOTO and the default name of the first  
file is SAM_0001.  
The file number increases by one, from  
SAM_0001 to SAM_9999, each time you  
take a picture.  
The folder number increases by one, from  
100PHOTO to 999PHOTO, each time a  
folder is full.  
Set the date and time.  
Set a date format. (YYYY/MM/DD,  
MM/DD/YYYY, DD/MM/YYYY)  
File No.  
Date Type  
Time Type  
The default date type may differ depending on the  
language selected.  
Set the time format. (12 Hr, 24 Hr)  
The maximum number of files that can be  
stored in one folder is 9,999.  
The default time type may differ depending on the  
language selected.  
The camera defines file names according  
to the Design rule for Camera File system  
(DCF) standard. If you intentionally change  
file names, the camera may not play back  
the files.  
Settings 132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings menu  
* Default  
* Default  
Item  
Description  
Item  
Description  
Set whether or not to display the date and  
time on captured photos.  
(Off*, Date, Date & Time)  
Format the internal memory and the memory  
card. Formatting will delete all files, including  
protected files. (Yes, No)  
The date and time will be displayed on the  
bottom right corner of the photo.  
Some printer models may not print the date  
and time properly.  
The photo will not display the date and  
time if:  
Errors can occur if you use a memory card  
formatted by another brand of camera, a memory  
card reader, or a computer. Please format memory  
cards in the camera before using them to capture  
photos.  
Format  
Imprint  
Reset menus and shooting options. Date and  
time, language, and video output settings will  
not be reset. (Yes, No)  
-
-
you select Text in Scene mode  
you select Live Panorama, Picture in  
Picture, Self Shot, Children, Jump Shot,  
Intelligent Portrait, Funny Face, or Motion  
Photo  
Reset  
-
you capture a photo with the front display  
Set the camera to automatically turn off when  
you perform no operations for a specified  
period. (Off, 1 min, 3 min*, 5 min, 10 min)  
Your settings will not change when you  
replace the battery.  
Auto Power Off  
The camera will not automatically turn  
off when the camera is connected to a  
computer, printer, or WLAN, and when you  
are playing a slide show or videos.  
Set a light to automatically turn on in dark  
places to help you focus. (Off, On*)  
AF Lamp  
Settings 133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Error messages  
When the following error messages appear, try these remedies.  
Error message  
Card Error  
Suggested remedies  
Error message  
Suggested remedies  
Turn off your camera, and then turn it on  
again.  
Network connection disconnected while  
transferring photos. Select a TV Link device  
again.  
Device  
disconnected.  
Remove your memory card, and then insert  
it again.  
Delete the damaged file or contact a service  
center.  
File Error  
Format your memory card.  
Your camera does not support the FAT file  
structure of the inserted memory card. Format  
the memory card on the camera.  
The inserted memory card is not supported by  
your camera. Insert a microSD, microSDHC, or  
microSDXC memory card.  
File system not  
supported.  
Card not  
supported.  
Turn on TV Link enabled devices on the  
network.  
The camera cannot connect to the network  
using the selected access point. Select  
another AP and try again.  
Initialization failed.  
Invalid password.  
Connection failed.  
DCF Full Error  
The camera has failed to locate a TV Link-  
enabled device.  
The camera has failed to connect to the other  
camera. Try connecting again.  
The password for transferring files to another  
camera is wrong. Enter the correct password  
again.  
File names do not match the DCF standard.  
Transfer the files from the memory card to your  
computer and format the card. Then, open the  
Settings menu and select File No. Reset.  
(p. 132)  
Low Battery  
Memory Full  
Insert a charged battery or recharge the battery.  
Delete unnecessary files or insert a new memory  
card.  
Appendixes 135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Error messages  
Error message  
No Image File  
Suggested remedies  
Capture photos or insert a memory card that  
contains some photos.  
Network connection disconnected while  
transferring photos. Try turning on the TV Link  
feature again.  
Photo transfer  
failed.  
The camera has failed to receive a photo from  
the sending camera. Ask the other person to  
send the file again.  
Photo reception  
failed.  
The camera has failed to send a photo to the  
other camera. Try sending again.  
Transfer failed.  
The camera has failed to send an email or  
transfer a photo to a TV Link device. Check  
the network connection and try again.  
Appendixes 136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera maintenance  
Camera body  
Cleaning your camera  
Wipe gently with a soft, dry cloth.  
Camera lens and display  
Use a blower brush to remove dust and wipe the lens gently with  
a soft cloth. If any dust remains, apply lens cleaning liquid to a  
piece of lens cleaning paper and wipe gently.  
Never use benzene, thinners, or alcohol to clean the device. These  
solutions can damage the camera or cause it to malfunction.  
Do not press on the lens cover or use a blower brush on the lens  
cover.  
Appendixes 137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Storing for extended period of time  
Using or storing the camera  
When you store the camera for an extended period, place it in a  
sealed container with an absorbent material, such as silica gel.  
Inappropriate places to use or store the camera  
Remove the batteries from your camera when storing it for an  
extended period. Installed batteries may leak or corrode over  
time and cause serious damage to your camera.  
Avoid exposing the camera to very cold or very hot  
temperatures.  
Avoid using your camera in areas with extremely high humidity,  
or where the humidity changes drastically.  
Over time, unused batteries will discharge and must be  
recharged before use.  
Avoid exposing the camera to direct sunlight and storing it in  
hot, poorly-ventilated areas, such as in a car during summer  
time.  
The present date and time can be initialized when the camera  
is turned on after the camera and battery have been separated  
for over 40 hours.  
Protect your camera and the display from impact, rough  
handling, and excessive vibration to avoid serious damage.  
Avoid using or storing your camera in dusty, dirty, humid, or  
poorly-ventilated areas to prevent damage to moving parts and  
internal components.  
Using the camera with caution in humid environments  
When you transfer the camera from a cold environment to a warm  
one, condensation can form on the lens or internal components  
of the camera. In this situation, turn off the camera and wait for at  
least 1 hour. If condensation forms on the memory card, remove  
the memory card from the camera and wait until all moisture has  
evaporated before reinserting it.  
Do not use your camera near fuels, combustibles, or flammable  
chemicals. Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the camera or  
its accessories.  
Do not store the camera where there are mothballs.  
Other cautions  
Using on beaches or shores  
Do not swing your camera by the strap. This may cause injury  
to yourself or others or damage to your camera.  
Protect your camera from sand and dirt when you use it on  
beaches or in similar areas.  
Do not paint your camera, as paint can clog moving parts and  
prevent proper operation.  
Your camera is not waterproof. Do not handle the battery,  
adapter, or memory card with wet hands. Operating the camera  
with wet hands may cause damage to your camera.  
Turn off the camera when not using it.  
Appendixes 138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Your camera contains delicate parts. Avoid impacts to the  
camera.  
Paint or metal on the outside of the camera may cause  
allergies, itchy skin, eczema, or swelling for people with  
sensitive skin. If you experience any of these symptoms, stop  
using the camera immediately and consult a doctor.  
Protect the display from external force by keeping it in the case  
when not in use. Protect the camera from scratches by keeping  
it away from sand, sharp implements, or loose change.  
Do not insert foreign objects into any of your camera’s  
compartments, slots, or access points. Damage due to  
improper use may not be covered by your warranty.  
Do not use the camera if the screen is cracked or broken.  
Broken glass or acrylic could cause injury to your hands and  
face. Take the camera to a Samsung service center to have it  
repaired.  
Do not allow unqualified personnel to service the camera or  
attempt to service the camera yourself. Any damage that results  
from unqualified service is not covered by your warranty.  
Never place cameras, batteries, chargers, or accessories near,  
on, or in heating devices, such as microwave ovens, stoves, or  
radiators. These devices may be deformed and can overheat  
and cause a fire or explosion.  
Do not expose the lens to direct sunlight, as this may discolor  
the image sensor or cause it to malfunction.  
About memory cards  
Protect the lens from fingerprints and scratches. Clean the lens  
with a soft, clean, debris-free lens cloth.  
Supported memory cards  
Your camera supports microSD, microSDHC, or microSDXC  
memory cards.  
The camera may turn off if struck or dropped. This is to protect  
the memory card. Turn on the camera to use it again.  
To read data with a PC or memory card reader,  
insert the memory card into a memory card  
adapter.  
While you use the camera, it may heat up. This is normal and  
should not affect your camera’s lifespan or performance.  
When you use the camera in low temperatures, it may take  
some time to turn on, the color of the display may be changed  
temporarily, or after-images may appear. These conditions are  
not malfunctions and they will correct themselves when the  
camera is returned to milder temperatures.  
Appendixes 139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Memory card capacity  
Video  
The memory capacity may differ depending on shooting scenes  
or shooting conditions. These capacities are based on a  
1 GB microSD card:  
Size  
30fps  
15fps  
Approx.  
14' 55"  
Approx.  
28' 54"  
1280 X 720  
640 X 480  
320 X 240  
Photo  
Approx.  
34' 55"  
Approx.  
65' 40"  
Size  
Super Fine  
Fine  
Normal  
Approx.  
134' 34"  
Approx.  
231' 14"  
105  
206  
303  
117  
140  
230  
275  
337  
406  
Approx.  
134' 34"  
Approx.  
231' 14"  
For Sharing  
(DV300F/DV305F only)  
166  
323  
469  
* The figures above are measured without using the zoom function. Available  
recording time may vary if you use the zoom. Several videos were recorded  
in succession to determine the total recording time.  
319  
607  
858  
522  
954  
1,336  
1,878  
3,006  
742  
1,336  
2,505  
1,582  
Appendixes 140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera maintenance  
Prevent memory cards from making contact with liquids, dirt, or  
foreign substances. If dirty, wipe the memory card clean with a  
soft cloth before you insert the memory card into your camera.  
Cautions when using memory cards  
Avoid exposing memory cards to very cold or very hot  
temperatures (below 0 °C/32 °F or above 40 °C/104 °F).  
Extreme temperatures can cause memory cards to malfunction.  
Do not allow liquids, dirt, or foreign substances to come in  
contact with memory cards or the memory card slot. Doing so  
may cause memory cards or the camera to malfunction.  
Insert a memory card in the correct direction. Inserting a  
memory card in the wrong direction may damage your camera  
and memory card.  
When you carry a memory card, use a case to protect the card  
from electrostatic discharges.  
Do not use memory cards that have been formatted by other  
cameras or by a computer. Reformat the memory card with  
your camera.  
Transfer important data to other media, such as a hard disk,  
CD, or DVD.  
When you use the camera for an extended period, the memory  
card may become warm. This is normal and does not indicate  
a malfunction.  
Turn off the camera before you insert or remove the memory  
card.  
Do not remove the memory card or turn off your camera while  
the lamp is blinking, as this may damage your data.  
The manufacturer is not responsible for any loss of data.  
When the lifespan of a memory card has expired, you cannot  
store any more photos on the card. Use a new memory card.  
Do not bend, drop, or subject memory cards to heavy impact  
or pressure.  
Avoid using or storing memory cards near strong magnetic  
fields.  
Avoid using or keeping memory cards in areas with high  
temperature, high humidity, or corrosive substances.  
Appendixes 141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Battery life  
About the battery  
Use only Samsung-approved batteries.  
Average shooting time/  
Number of photos  
Test conditions (when the battery is fully  
charged)  
Battery specifications  
The battery life was measured under the  
following conditions: in Program mode,  
Specification  
Model  
Description  
in darkness,  
OIS on.  
resolution, Fine quality,  
BP88A  
Type  
Lithium-ion battery  
880 mAh  
3.7 V  
1. Set the flash option to Fill in, take a  
single shot, and zoom in or out.  
Cell capacity  
Voltage  
Approximately  
130 min/  
Approximately  
260 photos  
2. Set the flash option to Off, take a  
single shot, and zoom in or out.  
Photos  
Charging time* (when the camera is  
switched off)  
Approximately 210 min  
3. Perform steps 1 and 2, waiting  
30 seconds between each step.  
Repeat the process for 5 minutes,  
and then turn off the camera for  
1 minute.  
* Charging the battery by connecting it to a computer may take longer.  
4. Repeat steps 1 to 3.  
Approximately  
Videos  
Record videos at  
30 FPS.  
resolution and  
80 min  
The figures above are measured by Samsung’s standards. Your results may  
differ, depending on your actual usage.  
Several videos were recorded in succession to determine the total recording  
time.  
When using network functions, the battery will be depleted more quickly.  
Appendixes 142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Low battery message  
Cautions about using the battery  
When the battery has fully discharged, the battery icon will turn  
red and the "Low Battery" message will appear.  
Protect batteries, chargers, and memory cards from  
damage  
Prevent batteries from making contact with metal objects, as this  
can create a connection between the + and – terminals of your  
battery and lead to temporary or permanent battery damage and  
may cause a fire or electric shock.  
Notes about using the battery  
Avoid exposing batteries to very cold or very hot temperatures  
(below 0 °C/32 °F or above 40 °C/104 °F). Extreme  
temperatures can reduce the charging capacity of your  
batteries.  
Notes about charging the battery  
If the status lamp is off, make sure that the battery is inserted  
correctly.  
When you use the camera for an extended period, the area  
around the battery chamber may become warm. This does not  
affect the normal use of the camera.  
If the camera is on while charging, the battery may not fully  
charge. Turn off the camera before charging the battery.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Do not use your camera when you are charging the battery.  
This may cause a fire or electric shock.  
In temperatures below 0 °C/32 °F, battery capacity and battery  
life may decrease.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Battery capacity may decrease in low temperatures but will  
return to normal in milder temperatures.  
Let the battery charge for at least 10 minutes before turning on  
the camera.  
If you connect the camera to an external power source when  
the battery is depleted, using high energy-consuming functions  
will cause the camera to turn off. To use the camera normally,  
recharge the battery.  
Appendixes 143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
If you reconnect the power cable when the battery is fully  
charged, the status lamp turns on for approximately 30 minutes.  
Handling and disposing of batteries and chargers  
with care  
Using the flash or recording videos depletes the battery quickly.  
Charge the battery until the red status lamp turns off.  
Never dispose of batteries in a fire. Follow all local regulations  
when you dispose of used batteries.  
If the status lamp blinks in red, reconnect the cable, or remove  
the battery and insert it again.  
Never place batteries or cameras on or in heating devices,  
such as microwave ovens, stoves, or radiators. Batteries may  
explode when they are overheated.  
If you charge the battery when the cable is overheated or  
the temperature is too high, the status lamp may blink in red.  
Charging will start when the battery cools down.  
Overcharging batteries may shorten battery life. After charging is  
finished, disconnect the cable from your camera.  
Do not bend or place heavy objects on the AC cable. Doing so  
may damage the cable.  
Notes about charging with a computer connected  
Use only the provided USB cable.  
The battery may not charge when:  
-
-
-
you use a USB hub  
other USB devices are connected to your computer  
you connect the cable to the port on the front side of your  
computer  
-
the USB port of your computer does not support the power output  
standard (5 V, 500 mA)  
Appendixes 144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera maintenance  
Personal injury or death can occur if the battery is  
handled carelessly or improperly. For your safety,  
follow these instructions for proper battery handling:  
Do not disassemble or puncture the battery with any  
sharp object.  
Avoid exposing the battery to high pressure or crushing  
forces.  
The battery can ignite or explode if not handled properly.  
If you notice any deformities, cracks, or other  
Avoid exposing the battery to major impacts, such as  
dropping it from high places.  
abnormalities in the battery, immediately discontinue use  
of the battery and contact a service center.  
Do not expose the battery to temperatures of  
60 °C (140 °F) or above.  
Use only authentic, manufacturer-recommend battery  
chargers and adapters and charge the battery only by the  
methods described in this user manual.  
Do not allow the battery to come in contact with moisture  
or liquids.  
Do not place the battery near heating devices or expose  
it to excessively warm environments, such as the inside  
of an enclosed car in the summertime.  
Do not expose the battery to sources of excessive heat  
such as sunshine, fire or the like.  
Do not place the battery in a microwave oven.  
Disposal guidelines  
Avoid storing or using the battery in hot, humid places,  
such as spas or shower enclosures.  
Dispose of the battery with care.  
Do not dispose of the battery in a fire.  
Do not rest the device on flammable surfaces, such as  
bedding, carpets, or electric blankets for a prolonged  
period.  
Disposal regulations may differ by country or region.  
Dispose of the battery in accordance with all local and  
federal regulations.  
When the device is switched on, do not leave it in any  
confined space for a prolonged period.  
Guidelines for charging the battery  
Charge the battery only by the method described in  
this user manual. The battery can ignite or explode if  
not charged properly.  
Do not allow battery terminals to come in contact with  
metallic objects, such as necklaces, coins, keys, or  
watches.  
Use only authentic, manufacturer-recommended,  
Lithium-ion replacement batteries.  
Appendixes 145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service center  
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted  
the suggested remedy and are still having problems with your device, contact your local dealer or service center.  
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Ensure that the battery is inserted.  
There is no space on the memory card.  
Delete unnecessary files or insert a new  
card.  
Cannot turn on the  
camera  
Ensure that the battery is inserted  
correctly. (p. 17)  
Format the memory card.  
Charge the battery.  
Charge the battery.  
The memory card is defective. Get a new  
memory card.  
Cannot capture photos  
Your camera may be in Auto Power Off  
mode. (p. 133)  
Make sure that the camera is switched  
on.  
The power turns off  
suddenly  
The camera may turn off to prevent the  
memory card from being damaged due  
to an impact. Turn on your camera again.  
Charge the battery.  
Make sure that the battery is inserted  
correctly.  
The battery may lose power more quickly  
in low temperatures (below 0 °C/32 °F).  
Keep the battery warm by putting it into  
your pocket.  
The camera freezes  
The camera heats up  
Remove the battery and insert it again.  
While you use the camera, it may heat up.  
This is normal and should not affect your  
camera’s lifespan or performance.  
The camera is losing  
battery power quickly  
Using the flash or recording videos  
depletes the battery quickly. Recharge  
if needed.  
The flash option may be set to Off.  
(p. 64)  
The flash does not work  
Batteries are consumable parts that must  
be replaced over time. Get a new battery  
if the battery life is diminishing quickly.  
You cannot use the flash in some modes.  
Appendixes 146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
The flash fires  
unexpectedly  
The flash may fire due to static electricity.  
The camera is not malfunctioning.  
Make sure that the focus option you set  
is suitable for close-up shots. (p. 67)  
Make sure that the lens is clean. If not,  
clean the lens. (p. 137)  
The date and time are  
incorrect  
Set the date and time in the display settings.  
(p. 132)  
The photo is blurry  
Make sure that the subject is within range  
of the flash. (p. 150)  
The display or buttons  
do not work  
Remove the battery, and then insert it again.  
An incorrect White Balance can create  
unrealistic color. Select the proper White  
Balance option to suit the light source.  
(p. 76)  
If you use your camera at very low  
The colors in the photo  
do not match the actual  
scene  
temperatures, it may cause the camera  
screen to malfunction or discolor. For better  
performance of your camera screen, use  
your camera in moderate temperatures.  
The camera display  
responds poorly  
Your photo is overexposed.  
Turn off the flash. (p. 64)  
Turn off your camera, and then turn it  
on again.  
The photo is too bright  
The photo is too dark  
Adjust the ISO sensitivity. (p. 66)  
Adjust the exposure value. (p. 74)  
Remove your memory card, and then  
insert it again.  
The memory card has  
an error  
Your photo is underexposed.  
Format your memory card.  
Turn on the flash. (p. 64)  
See “Cautions when using memory cards”  
for more detail. (p. 141)  
Adjust the ISO sensitivity. (p. 66)  
Adjust the exposure value. (p. 74)  
If you change the name of a file, your  
camera may not play the file (the name of  
the file should meet the DCF standard). If  
you encounter this situation, play back the  
files on your computer.  
Cannot play back files  
Appendixes 147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Make sure that the camera is correctly  
connected to the TV with the A/V cable.  
End Intelli-studio and restart the program.  
The TV does not  
display your photos  
You cannot use Intelli-studio on  
Macintosh computers.  
Make sure that your memory card  
contains photos.  
Make sure that PC Software is set to  
On in the settings menu. (p. 131)  
Make sure that the USB cable is  
connected correctly.  
Intelli-studio is not  
functioning properly  
Depending on your computer's  
Your computer does  
not recognize your  
camera  
specifications and environment, the  
program may not launch automatically. In  
this case, click Start All Programs “  
SAMSUNG Intelli-studio “  
Make sure that your camera is switched  
on.  
Make sure that you are using a supported  
operating system.  
Intelli-studio on your computer.  
The file transmission may be interrupted by  
static electricity. Disconnect the USB cable  
and connect it again.  
Your computer  
disconnects the camera  
while transferring files  
Your TV or computer  
cannot display photos  
and videos that are  
stored on a microSDXC  
memory card.  
microSDXC memory cards use the exFAT  
file system. Ensure that the external device  
is compatible with the exFAT file system  
before connecting the camera to the device.  
Videos may not play on some video player  
Your computer cannot programs. To play video files captured with  
play videos  
your camera, install and use the Intelli-studio  
program on your computer. (p. 101)  
microSDXC memory cards use the exFAT  
file system. To use microSDXC memory  
cards on a Windows XP computer,  
download and update the exFAT file system  
driver from the Microsoft website.  
Your computer does  
not recognize a  
microSDXC memory  
card.  
Appendixes 148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Image sensor  
Wide (W)  
80 cm–infinity  
5–80 cm  
Tele (T)  
Type  
1/2.3" (Approximately 7.76 mm) CCD  
Approximately 16.1 mega-pixels  
Approximately 16.4 mega-pixels  
Normal (AF)  
Macro  
250 cm–infinity  
100–250 cm  
100 cm–infinity  
Range  
Effective pixels  
Auto Macro  
5 cm–infinity  
Total pixels  
Shutter speed  
Lens  
Auto: 1/8–1/2,000 sec.  
Samsung Lens f = 4.5–22.5 mm  
(35 mm film equivalent: 25–125 mm)  
Focal length  
F-stop range  
Program: 1–1/2,000 sec.  
Night: 16–1/2,000 sec.  
Fireworks: 2 sec.  
F2.5 (W)–F6.3 (T)  
Still image mode: 1.0–5.0X  
(Optical zoom X Digital zoom: 25.0X,  
Optical zoom X Intelli zoom: 10.0X)  
Exposure  
Zoom  
Control  
Program AE  
Metering  
Multi, Spot, Center-weighted, Face Detection  
2EV (1/3 EV Step)  
Display  
Type  
TFT LCD  
Compensation  
Main display: 3.0" (7.62 cm) 460K  
Front display: 1.5" (3.8 cm) 61K  
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,  
ISO 1600, ISO 3200  
Feature  
Focusing  
Type  
ISO equivalent  
TTL auto focus (Center AF, Multi AF, Tracking AF,  
Face Detection AF, Smart Face Recognition AF)  
Appendixes 149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera specifications  
Flash  
Date Imprinting  
Date & Time, Date, Off  
Shooting  
Smart Auto, Auto, Red-eye, Fill in, Slow Sync, Off,  
Red-eye Fix  
Mode  
Wide: 0.2–4.1 m (ISO Auto)  
Tele: 0.5–1.6 m (ISO Auto)  
Modes: Smart Auto (Portrait, Night Portrait,  
Range  
Backlight Portrait, Night, Backlight, Landscape,  
White, Natural Green, Blue Sky, Sunset, Macro,  
Macro text, Macro Color, Tripod, Action, Fireworks),  
Program, Scene (Landscape, Sunset, Dawn,  
Backlight, Beach & Snow, Text), Live Panorama,  
Picture in Picture, Self Shot, Children, Jump Shot,  
Beauty Shot, Intelligent Portrait, Night Shot, Close-up  
Shot, Magic Frame, Funny Face, Photo Filter,  
Split Shot, Artistic Brush, Motion Photo  
Recharging time Approximately 4 sec.  
Shake reduction  
Optical Image Stabilization (OIS)  
Effect  
Photos  
Photo Filter (Smart Filter): Miniature, Vignetting,  
Ink Painting, Oil Painting, Cartoon, Cross Filter,  
Sketch, Soft Focus, Fish-eye, Old Film,  
Burst: Single, Continuous, Motion Capture, AEB  
Timer: Off, 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)  
Photo Shooting  
mode  
Half Tone Dot, Classic, Retro, Zooming Shot  
Image Adjust: Sharpness, Contrast, Saturation  
Modes: Smart Movie (Landscape, Blue Sky,  
Natural Green, Sunset), Movie, Picture in Picture,  
Movie Filter  
Movie Filter (Smart Filter): Miniature, Vignetting,  
Half Tone Dot, Sketch, Fish-eye, Classic, Retro,  
Palette Effect 1, Palette Effect 2, Palette Effect 3,  
Palette Effect 4  
Video Shooting  
mode  
Format: MP4 (H.264) (Max recording time: 20 min)  
Size: 1280 X 720, 640 X 480, 320 X 240,  
For Sharing (DV300F/DV305F only)  
Videos  
White Balance  
Frame Rate: 30fps, 15fps  
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,  
Custom Set  
Sound Alive: Sound Alive On, Sound Alive Off, Mute  
OIS: On, Off  
Video editing (embedded): Pause during recording  
Appendixes 150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Playback  
For 1 GB microSD: Number of photos  
Type: Single image, Thumbnails, Multi Slide Show  
with Music and Effect, Movie clip, Smart Album*  
Super Fine  
105  
Fine  
Normal  
303  
4608 X 3456  
4608 X 3072  
4608 X 2592  
3648 X 2736  
2592 X 1944  
1984 X 1488  
1920 X 1080  
1024 X 768  
206  
230  
* Smart Album category: All, Date, Face List,  
File Type  
Edit: Resize, Rotate, Image Adjust, Smart Filter, Crop  
117  
337  
140  
275  
406  
Photos  
Effect: Image Adjust (Brightness, Contrast,  
Saturation, ACB, Face Retouch, Red-eye Fix),  
Smart Filter (Normal, Miniature, Vignetting,  
Ink Painting, Oil Painting, Cartoon, Cross Filter,  
Sketch, Soft Focus, Fish-eye, Old Film,  
166  
323  
469  
Image size  
319  
607  
858  
522  
954  
1,336  
1,878  
Half Tone Dot, Classic, Retro, Zooming Shot)  
742  
1,336  
2,505  
Videos  
Edit: Still image capture, Time trimming  
1,582  
3,006  
Storage  
These figures are measured under Samsung’s standard  
conditions. Your results may vary depending on the  
shooting conditions and camera settings.  
Internal memory: Approximately 16 MB  
External memory (Optional):  
microSD card (1–2 GB guaranteed),  
microSDHC card (up to 32 GB guaranteed),  
microSDXC card (up to 64 GB guaranteed)  
Media  
Internal memory capacity may not match these  
specifications.  
Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1,  
PictBridge 1.0, GIF  
File format  
Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,  
Audio: AAC)  
Appendixes 151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Wireless network (DV300F/DV305F only)  
Dimensions (W X H X D)  
Social Sharing, Email, MobileLink, Remote Viewfinder, Cloud,  
Auto Backup, TV Link, Authentication Browser, Wi-Fi Direct  
95.2 X 56.5 X 18.3 mm (3.75 X 2.22 X 0.72 in.) (without protrusions)  
Weight  
Interface  
120 g (4.233 oz.) (without battery and memory card)  
Digital output  
USB 2.0  
Operating Temperature  
0–40 °C (32–104 °F)  
Operating Humidity  
5–85 %  
connector  
Audio input/  
Internal speaker (Mono), Microphone (Mono)  
output  
Video output  
A/V: NTSC, PAL (selectable)  
5 V  
DC power input  
connector  
Software  
Intelli-studio  
Power source  
Specifications may change without notice to improve performance.  
Rechargeable  
battery  
Lithium-ion battery (BP88A, 880 mAh)  
Micro USB (5 pin)  
Connector type  
The power source may differ depending on your region.  
Appendixes 152  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
ACB (Auto Contrast Balance)  
Composition  
This feature automatically improves the contrast of your images  
when the subject is backlit or when there is a high contrast  
between your subject and the background.  
Composition in photography means arranging objects in a photo.  
Usually, abiding by the rule of thirds leads to a good composition.  
DCF (Design rule for Camera File system)  
AEB (Auto Exposure Bracket)  
A specification to define a file format and file system for digital  
cameras created by the Japan Electronics and Information  
Technology Industries Association (JEITA).  
This feature automatically captures several images at different  
exposures to help you capture a properly-exposed image.  
AF (Auto Focus)  
Depth of field  
A system that automatically focuses the camera lens on the  
subject. Your camera uses the contrast to focus automatically.  
The distance between the nearest and farthest points that can  
be acceptably focused in a photograph. Depth of field varies with  
lens aperture, focal length, and distance from the camera to the  
subject. Selecting a smaller aperture, for example, will increase  
the depth of field and blur the background of a composition.  
Aperture  
The aperture controls the amount of light that reaches the  
camera’s sensor.  
Digital zoom  
A feature that artificially increases the amount of zoom available  
with a zoom lens (Optical zoom). When using the Digital zoom,  
the image quality will deteriorate as the magnification increases.  
Camera shake (Blur)  
If the camera is moved while the shutter is open, the entire image  
may appear blurred. This occurs more often when the shutter  
speed is slow. Prevent camera shake by raising the sensitivity,  
using the flash, or using a faster shutter speed. Alternately, use a  
tripod, the DIS or OIS function to stabilize the camera.  
Appendixes 153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
DPOF (Digital Print Order Format)  
Exposure  
A format for writing printing information, such as selected images  
and number of prints, on a memory card. DPOF-compatible  
printers, sometimes available at photo shops, can read the  
information from the card for convenient printing.  
The amount of light allowed to reach the camera’s sensor.  
Exposure is controlled by a combination of the shutter speed, the  
aperture value, and ISO sensitivity.  
Flash  
EV (Exposure Value)  
A speed light that helps to create adequate exposure in low-light  
conditions.  
All the combinations of the camera’s shutter speed and lens  
aperture that result in the same exposure.  
Focal length  
EV Compensation  
The distance from the middle of the lens to its focal point (in  
millimeters). Longer focal lengths result in narrower angles of view  
and the subject is magnified. Shorter focal lengths result in wider  
angles of view.  
This feature allows you to quickly adjust the exposure value  
measured by the camera, in limited increments, to improve the  
exposure of your photos. Set the EV compensation to -1.0 EV to  
adjust the value one step darker and 1.0 EV to one step brighter.  
H.264/MPEG-4  
Exif (Exchangeable Image File Format)  
A high-compression video format established by international  
standard organizations ISO-IEC and ITU-T and developed by the  
Joint Video Team (JVT). This codec is capable of providing good  
video quality at low bit rates.  
A specification to define an image file format for digital cameras  
created by the Japan Electronic Industries Development  
Association (JEIDA).  
Appendixes 154  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Image sensor  
Macro  
The physical part of a digital camera that contains a photosite for  
each pixel in the image. Each photosite records the brightness of  
the light that strikes it during an exposure. Common sensor types  
are CCD (Charge-coupled Device) and CMOS (Complementary  
Metal Oxide Semiconductor).  
This feature allows you to capture close-up photos of very small  
objects. When using the macro feature, the camera can maintain  
a sharp focus on small objects at a near life-size ratio (1:1).  
Metering  
The metering refers to the way in which the camera measures the  
quantity of light to set the exposure.  
ISO sensitivity  
The sensitivity of the camera to light, based on the equivalent film  
speed used in a film camera. At higher ISO sensitivity settings,  
the camera uses a higher shutter speed, which can reduce blur  
caused by camera shake and low light. However, images with  
high sensitivity are more susceptible to noise.  
MJPEG (Motion JPEG)  
A video format which is compressed as a JPEG image.  
Noise  
Misinterpreted pixels in a digital image that may appear as  
misplaced or random, bright pixels. Noise usually occurs when  
photos are shot with a high sensitivity or when a sensitivity is  
automatically set in a dark place.  
JPEG (Joint Photographic Experts Group)  
A lossy method of compression for digital images. JPEG images  
are compressed to reduce their overall file size with minimal  
deterioration of the image resolution.  
OIS (Optical Image Stabilization)  
LCD (Liquid Crystal Display)  
This feature compensates in real-time for shaking and vibrating  
while shooting. There is no image degradation compared to  
Digital Image Stabilization feature.  
A visual display commonly used in consumer electronics. This  
display needs a separate backlight, such as CCFL or LED, to  
reproduce colors.  
Appendixes 155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Optical zoom  
Vignetting  
This is a general zoom which can enlarge images with a lens and  
does not deteriorate quality of images.  
A reduction of an image’s brightness or saturation at the periphery  
(outer edges) compared to the center of the image. Vignetting  
can draw interest to subjects positioned in the center of an  
image.  
Quality  
An expression of the rate of compression used in a digital image.  
Higher quality images have a lower rate of compression, which  
usually results in a larger file size.  
White balance (color balance)  
An adjustment of the intensities of colors (typically the primary  
colors red, green, and blue), in an image. The goal of adjusting  
the white balance, or color balance, is to correctly render the  
colors in an image.  
Resolution  
The number of pixels present in a digital image. High resolution  
images contain more pixels and typically show more detail than  
low resolution images.  
Shutter speed  
Shutter speed refers to the amount of time it takes to open and  
close the shutter, and it is an important factor in the brightness of  
a photo, as it controls the amount of light which passes through  
the aperture before it reaches the image sensor. A fast shutter  
speed allows less time to let light in and the photo becomes  
darker and more easily freezes subjects in motion.  
Appendixes 156  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correct Disposal of This Product  
Correct disposal of batteries in this product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European  
countries with separate battery return systems)  
(Applicable in the European Union and other European  
countries with separate collection systems)  
This marking on the battery, manual or packaging indicates that  
the batteries in this product should not be disposed of with other  
household waste at the end of their working life. Where marked, the  
chemical symbols Hg, Cd or Pb indicate that the battery contains  
mercury, cadmium or lead above the reference levels in EC Directive  
2006/66. If batteries are not properly disposed of, these substances  
can cause harm to human health or the environment.  
This marking on the product, accessories or literature indicates that  
the product and its electronic accessories (e.g. charger, headset, USB  
cable) should not be disposed of with other household waste at the  
end of their working life. To prevent possible harm to the environment  
or human health from uncontrolled waste disposal, please separate  
these items from other types of waste and recycle them responsibly to  
promote the sustainable reuse of material resources. Household users  
should contact either the retailer where they purchased this product,  
or their local government office, for details of where and how they can  
take these items for environmentally safe recycling. Business users  
should contact their supplier and check the terms and conditions of the  
purchase contract. This product and its electronic accessories should  
not be mixed with other commercial wastes for disposal.  
To protect natural resources and to promote material reuse, please  
separate batteries from other types of waste and recycle them through  
your local, free battery return system.  
This Class [B] digital apparatus complies with Canadian  
ICES-003.  
PlanetFirst represents Samsung Electronics'  
commitment to sustainable development and social  
responsibility through eco-driven business and  
management activities.  
Dispose unwanted electronics through an approved recycler.  
To nd the nearest recycling location, go to our website:  
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799  
Appendixes 157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC notice  
Declaration of Conformity  
Caution:  
Trade Name  
: Samsung Electronics America, Inc.  
Any changes or modifications in construction of this device which are not  
expressly approved by the party responsible for compliance could void the user's  
authority to operate the equipment.  
Model No.  
: Samsung DV300/DV300F/  
DV305/DV305F  
NOTE:  
Responsible Party  
Address  
: Samsung Electronics America, Inc.  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
: 85 Challenger Road, Ridgefield Park,  
NJ 07660  
Telephone No.  
: 1-800-SAMSUNG (726-7864)  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2)  
this device must accept any interference received, including  
interference that may cause undesired operation.  
- Reorientate, or relocate, the receiving antenna.  
- Increase the distance between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
FCC ID:A3LDV300F  
- Consult the dealer or an experienced radio/TV technician for help.  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
RF exposure statements:  
This device is for handheld operation only. The antenna(s) used for this  
transmitter must be installed to provide a separation distance of at least 20 cm  
from all persons and must not be co-located or operating in conjunction with any  
other antenna or transmitter.  
Appendixes 158  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Complies with  
IDA Standards  
DA100790  
Approved by PTA,  
year 2012  
CAUTION  
RISK OF EXPLOSION IF BATTERY IS REPLACED BY  
AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING  
TO THE INSTRUCTIONS.  
TA-2011/1536  
APPROVED  
No.: ESD-1205936C  
NO-L-14041/01/2011/ETA/2012  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired operation.  
Caution:  
1668/2012/WRLO  
Any changes or modifications to the equipment not expressly  
approved by the party responsible for compliance could void  
user’s authority to operate the equipment.  
IC: 649E-DV300F  
This equipment may be operated in all EU countries.  
In France, this equipment may only be used indoors.  
Appendixes 159  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
and the Eco-Design Directive (2009/125/EC) implemented by  
Regulations (EC) No 278/2009 for external power supplies.  
Product details  
For the following  
Product : DIGITAL CAMERA  
Representative in the EU  
Model(s) : DV300F, DV305F  
(YEAR TO BEGIN AFFIXING CE MARKING 2011)  
Samsung Electronics Euro QA Lab.  
Blackbushe Business Park  
Saxony Way, Yateley, Hampshire  
GU46 6GG, UK  
Declaration & Applicable standards  
We hereby declare that the product(s) above is(are) in  
compliance with the essential requirements and other provisions  
of the R&TTE Directive (1999/5/EC), the Low Voltage Directive  
(2006/95/EC) and the Electromagnetic Compatibility Directive  
(2004/108/EC) by application of:  
22 December, 2011  
(Place and date of issue)  
Joong-Hoon Choi / Lab. Manager  
(Name and signature of authorized person)  
* This is not the address of Samsung Service Centre. For the  
address or the phone number of Samsung Service Centre, see  
the warranty card or contact the retailer where you purchased  
your product.  
EN 60950-1:2006+A1:2010  
EN 55022:2006+A1 :2007  
EN 61000-3-3:2008  
EN 55024:1998+A1:2001+A2:2003  
EN 61000-3-2:2006 +A1:2009 +A2:2009  
EN 300 328 v1.7.1  
EN 301 489-1 v1.8.1  
EN62311 :2008  
EN 301 489-17 V2.1.1  
Appendixes 160  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration sentence in official languages  
Nation  
Cesky  
Declaration  
Samsung Electronics tímto prohlašuje, že tento digitální fotoaparát je ve shodě se základními požadavky a dalšími  
příslušnými ustanoveními směrnice 1999/5/ES.  
Samsung Electronics erklærer herved, at digitale kameraer overholder de væsentlige krav og øvrige relevante krav i direktiv  
1999/5/EF.  
Dansk  
Hiermit erklärt Samsung Electronic, dass sich die Digitalkamera in Übereinstimmung mit den grundlegenden Anforderungen und den  
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG bendet.  
Deutsch  
Eesti  
Käesolevaga kinnitab Samsung Electronics digitaalkaamera vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist  
tulenevatele teistele asjakohastele sätetele.  
Hereby, Samsung Electronics declares that this digital camera is in compliance with the essential requirements and other relevant  
provisions of Directive 1999/5/EC.  
English  
Español  
Ελληνική  
Français  
Italiano  
Latviski  
Lietuvių  
Nederlands  
Por medio de la presente Samsung Electronics declara que la cámara digital cumple con los requisitos esenciales y cualesquiera  
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.  
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ η Samsung Electronics ΔΗΛΩΝΕΙ ΟΤΙ η ψηφιακή φωτογραφική μηχανή ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ  
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.  
Par la présente Samsung Electronic déclare que l'appareil photo numérique est conforme aux exigences essentielles et aux autres  
dispositions pertinentes de la directive 1999/5/CE.  
Con la presente Samsung Electronicsdichiara che questa fotocamera digitale è conforme ai requisiti essenziali e alle altre disposizioni  
stabilite dalla Direttiva 1999/5/CE.  
Ar šo Samsung Electronics deklarē, ka digitālā kamera atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem  
noteikumiem.  
Šiuo Samsung Electronics deklaruoja, kad šis skaitmeninis fotoaparatas, atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos  
nuostatas.  
Hierbij verklaart Samsung Electronics dat de digitale camera in overeenstemming is met de essentiële eisen en de andere relevante  
bepalingen van richtlijn 1999/5/EG.  
Appendixes 161  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Declaration sentence in official languages  
Nation  
Malti  
Declaration  
Hawnhekk, Samsung Electronics, tiddikjara li din il-kamera diġitali hi konformi mar-rekwiżiti essenzjali u ma' dispożizzjonijiet rilevanti  
oħrajn ta' Direttiva 1999/5/KE.  
A Samsung Electronics kijelenti, hogy ez a digitális fényképezőgép megfelel az 1999/5/EK irányelv alapvetõ követelményeinek és  
egyéb vonatkozó elõírásainak.  
Magyar  
Niniejszym rma Samsung Electronics oświadcza, że ten aparat cyfrowy jest zgodny z zasadniczymi wymogami oraz pozostałymi  
stosownymi postanowieniami Dyrektywy 1999/5/WE.  
Polski  
Samsung Electronics declara que esta câmera digital está conforme os requisitos essenciais e outras disposições da Directiva  
1999/5/CE.  
Português  
Slovensko  
Slovensky  
Suomi  
Samsung Electronics izjavlja, da je ta digitalni fotoaparat v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive  
1999/5/ES.  
Samsung Electronics týmto vyhlasuje, že tento digitálny fotoaparát spĺňa základné požiadavky a všetky príslušné ustanovenia  
Smernice 1999/5/ES.  
Samsung Electronics vakuuttaa täten että tämä digitaalikamera on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien  
direktiivin muiden ehtojen mukainen.  
Härmed intygar Samsung Electronicsatt dessa digitalkameror står i överensstämmelse med de väsentliga egenskapskrav och övriga  
relevanta bestämmelser som framgår av direktiv 1999/5/EG.  
Svenska  
Български  
Română  
Norsk  
С настоящото Samsung Electronics декларира, че този цифров фотоапарат е в съответствие със съществените изисквания и  
другите приложими разпоредби на Директива 1999/5/ЕК.  
Prin prezenta, Samsung Electronics, declară că această cameră foto digitală este în conformitate cu cerinţele esenţiale şi alte  
prevederi relevante ale Directivei 1999/5/CE.  
Samsung Electronicserklærer herved at dette digitalkameraet er i samsvar med de grunnleggende krav og øvrige relevante krav i  
direktiv 1999/5/EF.  
Bu belge ile, Samsung Electronics bu dijital kameranın 1999/5/EC Yönetmeliginin temel gerekliliklerine ve ilgili hükümlerine uygun  
olduğunu beyan eder.  
Türkiye  
Hér með lýsir Samsung Electronics því yr að þessi stafræna myndavél sé í samræmi við grunnkröfur og önnur ákvæði tilskipunar  
1999/5/EB.  
Íslenska  
Appendixes 162  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please refer to the warranty that came with your product or  
inquiries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ricoh Camcorder WG 30 User Guide
Rival Fryer S12 WN User Guide
Ryobi Drill HP1202M User Guide
Samsung Air Conditioner AS09HPAN User Guide
Samsung Boating Equipment iDCS100 User Guide
Samsung Cell Phone GH68 05054A User Guide
Samsung Digital Camera 3000 User Guide
Samsung Flat Panel Television LE15E31S User Guide
Samsung Projector SP A400B User Guide
Schumacher Battery Charger SS 120A PE User Guide