ENGLISH
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and using the application
software. Please read this manual carefully before using your new camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
SHUTTER button
WIDE / TELE button
UP/ Voice memo button
MACRO / SUPER MACRO button
FLASH button
SELF-TIMER / REMOTE button
MENU/ OK button
MF button
32
33
35
36
37
40
42
43
44
READY
Getting to know your camera
About the symbols
Caution
5
6
6
Warning
7
Danger
8
Special features
9
This digital camera can be used for
Manufacturer's contents
Identification of features
Front & Top
10
12
13
13
13
14
14
15
17
20
+/- button
Using the LCD monitor to adjust the
camera
46
48
49
50
51
53
54
56
57
58
59
59
60
How to use the menu
Size
Back & Bottom
Side
Quality
5-function button
Mode dial
A/S/M
Metering
Connecting to Power
Inserting the memory card
Instructions on how to use the
memory card
Shooting
White Balance
Effect
21
23
25
Sharpness
Selecting the date and time
Language
My SET mode menu
Mode
Change
RECORDING
PLAY
LCD monitor indicator
Starting recording mode
Using the camera button to adjust the
camera
27
29
Starting the play mode
LCD monitor indicator
Information button
62
64
65
32
32
LCD button
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Thumbnail & Wide /
Tele & Trimming button
Thumbnail / Enlargement /
Trimming button
UP / Voice memo button
DOWN / LEFT / RIGHT button
MENU / OK button
DELETE button
PLAY & PAUSE button
Setting up the play back function
using the LCD monitor
Slide show
Video
91
92
65
Connecting to an external monitor
Quick view
93
66
67
68
68
69
70
MyCAM menu
94
Start up image
94
Start up sound
95
Shutter sound
95
List of camera function
Starting PC mode
Important notes
96
99
101
102
103
106
71
72
73
74
75
76
77
78
79
80
81
82
83
85
86
87
88
89
90
Warning indicator
Before contacting a service center
Specifications
Protect
Resize
Delete all
SOFTWARE
DPOF : Standard
DPOF : Index
DPOF : Cancel
Setup menu
Software Notes
108
108
109
110
System Requirements
About the software
File
Setting up the application software
Removing the USB Driver for
Windows 98SE
Power off
Language
116
117
118
119
119
120
121
122
Format
Removable Disk
Date set
Removing the removable disk
Setting up the USB Driver for MAC
Using the USB Driver for MAC
Using PhotoImpression
Digimax Viewer 2.1
Time set
Date type
Imprint
Sound
LCD brightness
FAQ
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
Keep the manual in a safe place.
About the symbols
This manual contains instructions on using this camera that will help you to use this camera safely and
correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in
a minor or moderate injury.
NOTICE
NOTICE indicates a factor, which, if not avoided, may result in camera malfunction or
poor image quality.
INFORMATION
INFORMATION indicates a factor, which should assist further in the operation of the
camera.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About the symbols
The camera mode icons will be marked on the right side of the title bar. The title is available only in the
marked camera mode. Refer to below.
Icon
Mode dial
Camera working mode
Easy mode
Icon
Mode dial
Camera working mode
Program mode
Portrait mode
Night mode
Aperture priority mode
Manual mode
Shutter priority mode
Movie clip mode
User set mode
Voice recording mode
Play mode
Caution
Leaking, overheating, or burst batteries could result in fire or injury.
Use batteries with the correct specification for the camera.
Do not short circuit, heat or dispose of batteries in fire.
Do not use old batteries with new ones, or mix brands of batteries.
Ensure the batteries are positioned correctly with regard to polarity (+ / -).
When the camera is not in use for long periods, always unplug the camera from its power source.
Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it
continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC Power Adapter. After use,
always switch off the camera before unplugging the adapter from the AC Power wall socket. Then
make sure that any connector cords or cables to other
devices are disconnected before moving the camera.
Failure to do so may damage the cords or cables and
cause a fire or electric shock.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
Do not use the flash in close proximity to
people or animals. Positioning the flash too
close to your subject’s eyes, may cause
eyesight damage.
When taking photographs, never point the lens
of the camera directly into very strong light.
This may result in permanent damage to the
camera or your eyesight.
For safety reasons keep this product and accessories out of reach of children or animals to prevent
accidents e.g.:
Swallowing batteries or small camera accessories. In case of accidents, please consult a doctor immediately.
There is a risk of permanent eye damage if the flash is operated at a distance of less than one
meter from a person’s eyes.
There is a possibility of injury from the camera’s moving parts.
Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it time to
cool.
Do not leave this camera in places subject to
extremely high temperatures, such as a
sealed vehicle, direct sunlight or other places
of extreme variances in temperature.
Exposure to extreme temperatures may
adversely affect the camera’s internal
components and could cause a fire.
When in use, do not cover the camera or AC
Power Adapter. This may cause heat to build
up and distort the camera body or cause a fire.
Always use the camera and its accessories in
a well-ventilated area.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Danger
Do not attempt to modify this camera in any
way. This may result in fire, injury, electric
shock or severe damage to you or your
camera. Internal inspection, maintenance and
repairs should be carried out by your dealer or
Samsung Camera Service Center.
Please do not use this product in close
proximity to flammable or explosive gases, as
this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera,
and then disconnect the power source (batteries or AC Power Adapter). You must contact your
dealer or Samsung Camera Service Center. Do not continue to use the camera as this may cause a
fire or electric shock.
Do not insert or drop metallic or inflammable
foreign objects into the camera through access
points e.g. CARD slot and battery chamber.
This may cause a fire or electric shock.
Do not operate this camera with wet hands.
This could pose a risk of electric shock.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features
This digital camera has the following features.
A fine resolution of 4.0 mega pixels
A 3X optical and 4X digital zoom lens
A superior Schneider lens
9 power source options (a world first!)
A Super macro(6cm) function
3 different “My SET” modes
An FCC warning
This device has been tested in accordance with the limits of a class B digital device under item 15
of the FCC rules. These limits are designed to provide protection against harmful interference in
commercial installation. This equipment generates, absorbs and can emit radio frequency energy.
If it is not installed and used in accordance with the instructions, it may cause harmful interference
to radio communication. There is however, no guarantee that interference will not occur in a some
situations. Should any interference occur when this device is in operation, please try one or more of
the following measures.
Change the location and direction of any aerial.
Increase distance between camera and affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
This digital camera can be used for
Viewing images on a TV
screen or external monitor
(p. 92)
Printing images using a dedicated printer,
DPOF-compatible printer or DPOF-
equipped photo lab.(p.76)
Taking a picture.
(p. 29)
Down loading image files from
camera to computer.(p.100)
Editing images on a PC. (p.120)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
This digital camera can be used for
Creation of a digital photo album
Inserting images directly into any
electronic document
Recording your voice
(p. 30)
Taking a favourite image and
creating your own personalized
calendar with it.
Recording a movie clip
(refer to page 30)
You can even create your own unique gift-
wrap paper by using your digital images
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer's contents
Please check that you have the correct contents before using this product.
marked contents are optional.
Digital Camera
Pouch
AV cable
USB cable
Camera strap
User manual
Product warranty
Software CD
SD memory card
CR-V3 battery
Digimax Premium Power Pack : SLB-1437 KIT
Rechargeable
Cigar jack for car
battery
Battery charger
AC adapter
Digimax Battery I-Pack : SBP-1303 KIT
Rechargeable
Remote control
Battery charger
battery
AC cord
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Front & Top
Shutter button
Power switch
Flash light
amount sensor
Flash
Microphone
Viewfinder
Self-timer lamp
Strap eyelet
Remote
control sensor
Lens
Back & Bottom
Mode dial Lamp
Mode dial (p.15)
Flash indicator
lamp(Red)
Autofocus indicator
lamp(Green)
WIDE/THUMBNAIL
button (p.33/65)
Viewfinder
TELE/Digital zoom
button (p.33/66)
+&-/PLAY & PAUSE
button (p.44/70)
5-function button
Speaker
MF / DELETE
button (p.43/69)
LCD/INFROMATION
button (p.32/65)
USB/ AV connection
terminal
LCD monitor
DC input
connection point
Tripod socket PLAY mode button
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of features
Side
Memory card slot
Battery chamber
Memory card cover/
Battery chamber cover
5-function button
Voice memo / UP button
(p.35/67)
SELF-TIMER/REMOTE/ RIGHT
button (p.40/68)
FLASH / LEFT button
(p.37/68)
MENU/ OK button
(p.42/68)
MACRO / SUPER MACRO / DOWN button
(p.36/68)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode dial
You can select the desired working mode by using the mode dial located on the back of the camera.
This digital camera has 8 working modes. These are listed below.
EASY
Easy mode
To make camera operation easier, a bare minimum of camera
settings are required in this mode, such as image size. ( for
printing, memo and email)
PROGRAM
Program mode
In program mode, you can take a properly exposed photograph.
Moreover you can select all camera settings except aperture and
shutter speed.
PORTRAIT
Portrait mode
This is used for just portrait or both portrait and landscape shots.
NIGHT SCENE
Night scene mode
This mode is used at night or against a dark background.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode dial
A/S/M
Aperture priority / Shutter priority / Manual mode
The Aperture and Shutter can be set manually in the A/ S/ M mode.
MOVIE CLIP
Movie clip mode
A movie clip can be recorded as long as the available recording
time allows.
Image size and type are listed below.
- Image size : 288 X 208
- File type : *.AVI
MySET
User set mode
You can set your preferences and save them in this mode.
There are 3 kinds of user setting modes.
VOICE RECORDING
Voice recording mode
You can do voice recording and other audio in this mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Power
There are two ways in which to provide the camera with power. You can use batteries (AA Alkaline,
CR-V3, Ni-MH, Li-ion), or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5V 2.0A).
Using the batteries
1. Open the battery chamber cover by pushing in the direction of the arrow.
2. Insert the batteries taking note of the polarity (+ / -).
Inserting the AA type battery
Inserting the CR-V3 type battery
3. To close the battery chamber cover, push it until it clicks.
Battery condition indicator
There are 3 indicators for battery condition that are displayed on the LCD monitor.
: The batteries are fully charged.
: Prepare new batteries.
: There is no battery capacity. Replace with new batteries.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Power
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5V 2.0A).
We recommend using Ni-MH batteries for a digital camera.(Over 1600mAh, and within a year from
the date of manufacture) The batteries are listed below.
Non rechargeable batteries : AA type
CR-V3 type
: AA type
CR-V3 type
- Alkaline, Ni-Mn, Ni-Zn, Lithium
- Lithium
Rechargeable batteries
- Ni-MH, Ni-Cd (over 1000mAh)
- Digimax Battery I-Pack(SBP-1303)
Manufacturer’s rechargeable battery: Digimax Premium Power Pack (SLB-1437)
NOTICE
Important information about battery usage
- It is easy to buy the alkaline batteries, but the duration for using batteries varies in
accordance with the battery manufacturers or photography conditions.
- Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
- We recommend high capacity ALKALINE batteries as manganese batteries cannot deliver
sufficient power.
- Low temperatures (below O˚C) can affect the performance of the batteries and you may
experience reduced battery life.
- Batteries will usually recover at normal temperatures.
- Do not use old and new batteries at the same time.
-
-
During extended use of the camera, the camera body may become warm. This is perfectly normal.
If you are planning to use this camera for long periods of time, it is advisable to use an AC adapter.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to Power
Using the AC power adapter
If you have access to a mains supply, using an AC Adapter
allows the camera to be used for long periods of time.
Plug the adapter into the connection point (DC IN 5V) on the
camera. Remove the batteries when using the AC adapter.
DANGER
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera nor
adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter with the correct specification for the camera.
Failure to do so may affect your warranty.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the memory card
1. Turn off the camera power and pull the memory card cover in
the direction of the arrow to open.
2. Insert the memory card all the way into the memory card slot.
The Label stuck to the memory card and the front side of the
camera should face in the same direction. The memory card
pins and the LCD monitor should face in the same direction.
3. To close, push the card cover against the arrow until you
hear a click.
If the card cover does not close, check that the memory card
is inserted correctly. Do not force the memory card.
Removing the memory card
1. Turn the power off using the power switch. Open the memory
card cover and press the memory card as shown in the image
and release.
2. Remove the memory card and close the memory card cover.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
NOTICE
If you open the memory card cover when the camera power is turned on, the power will turn
off automatically.
Don’t remove the memory card when the Autofocus indicator lamp(Green) is blinking as this
may cause damage to data in the memory card.
You can use both an SD memory card and Multi Media Card (MMC).
We recommend using the SD memory card as the Multi-Media Card need more time to stored the
image than the SD memory card.
Card pins
The SD memory card has a write protect switch that
Write
protect
switch
prevents image files from being deleted or formatted. By
sliding the switch to the bottom of the SD memory card, the
data will be protected. By sliding the switch to the top of the
SD memory card, the data protection will be canceled.
Check the switch position before taking an image.
Label
SD(Secure Digital) memory card
When using a 32MB SD memory card, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance).
These figures are approximate as image capacities can be affected by variables such as memory
performance and subject matter.
Recorded image size
2272X1704 (Large)
2272X1504 (Photo)
1120X840 (Medium)
544X408 (Small)
TIFF
2
Super fine
Fine
25
Normal
38
12
14
2
29
43
8
53
106
451
159
676
35
225
Print
14
Memo
106
E-mail
676
EASY mode
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions on how to use the memory card
Maintenance of the memory card
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or subject the memory card
to any heavy impact.
Do not store the memory card in an environment with strong electronic or magnetic fields, e.g.
near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in temperature.
Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
Do not use the memory card that is used in another digital camera or memory card reader.
Do not use the memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
If the memory card is subjected to any of the following, the recorded data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting (formatting)
or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks,
CD etc.
If there is insufficient memory available :
If you press the shutter button for the shot, [CARD FULL !] message is displayed and the camera
will not operate. To optimize the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the date and time
You can record the date and time with the image data in the memory card.
1. Turn on the power and press the MENU button.
The recording mode menu will be displayed in the RECORDING mode, and the play mode menu
will be displayed in the PLAY mode.
(There is no associated menu in VOICE RECORDING mode.)
2. Select the [SETUP] tab by pressing the RIGHT button.
PLAY
SETUP
MyCAM
Select the [FORMAT] menu by pressing the DOWN/button.
Press the DOWN / button again and the next menu page will be
displayed.
DATE SET
TIME SET
D.TYPE
‘04/04/01
12:00 PM
YY/MM/DD
OFF
Press the UP or DOWN button and select [DATE SET].
IMPRINT
MOVE:
CHANGE:
3. Shift the cursor to the [DATE SET] sub menu by pressing the
RIGHT button.
PLAY
SETUP
YEAR
MyCAM
DATE SET
TIME SET
D.TYPE
04 /04/01
IMPRINT
SET:OK
BACK:
INFORMATION
Date setting range : 2002/01/01 ~ 2050/12/31
(Leap years and months are corrected automatically)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the date and time
4. Select the correct date by pressing the 5-function button.
PLAY
SETUP
MyCAM
RIGHT button
: selects YEAR/ MONTH/ DAY item.
DATE SET
TIME SET
D.TYPE
MONTH
UP or DOWN button : changes the value of each item.
04/ 04 /01
IMPRINT
SET:OK
BACK:
5. Press the OK button to confirm the setting.
To return to the main menu or cancel the setting, press the LEFT button.
6. To select the correct time, select [TIME SETUP] at step 2.
Press the MENU button again and the menu will be cancelled.
PLAY
SETUP
MyCAM
DATE SET
TIME SET
D.TYPE
‘04/04/01
12:00 PM
YY/MM/DD
OFF
IMPRINT
MOVE:
CHANGE:
NOTICE
You will need to check and select the correct Date / Time when the batteries have been
removed for a period longer than 1 hour.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
There is a choice of languages that can be displayed on the LCD monitor.
1. Turn on the power and press the MENU button.
The recording mode menu will be displayed in RECORDING mode, and the play mode menu will be
displayed in the PLAY mode. (There is no associated menu in VOICE RECORDING mode.)
2. Select the [SETUP] tab by pressing the RIGHT button.
PLAY
SETUP
MyCAM
Press the UP or DOWN button and select [LANGUAGE].
FILE
SERIES
PWR OFF
LANGUAGE
FORMAT
OFF
3. Shift the cursor to the [LANGUAGE] sub menu by pressing the
RIGHT button and select the language that you want by pressing
the UP or DOWN button.
ENGLISH
NO
EXIT:MENU
PAGE:
4. Press the OK button to confirm the setting.
PLAY
SETUP
MyCAM
To return to the main menu or cancel the setting, press the LEFT button.
Press the MENU button again and the menu will be cancelled.
FILE
ENGLISH
PWR OFF
LANGUAGE
FORMAT
SET:OK
BACK:
INFORMATION
You can select 15 languages. Those are listed below.
English, Korean, T. Chinese, S. Chinese, Japanese, Russian, Germany, Spanish, French,
Italian, Danish, Dutch, Swedish, Finnish, Portuguese.
Even if the camera is restarted, the language setting will be maintained.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording mode
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor indicator
The LCD monitor displays information about the shooting functions and selections.
Image & Full Status
No.
1
Description
Recording mode
Camera shake warning
Flash
Icons
Page
p.15
p.31
p.37
p.40
p.35
p.36
2
3
4
Self-timer, Remote
Voice memo
5
6
Macro/ Super macro
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor indicator
No.
7
Description
Metering
Icons
Page
p.53
p.55
p.44
p.44
p.44
p.43
8
ISO
9
Exposure compensation
Aperture compensation
Shutter speed compensation
Manual focus
F5.6
1/250
10
11
12
13
14
15
Date / Time
2004/04/01 10:34 AM
White Balance
p.56
p.58
p.50
p.49
p.54
Sharpness
Image quality
Image size
Continuous shot, AEB
Number of available shots remaining
Remaining time( Movie clip/ Voice recording)
Auto focus frame
Zoom / Digital Zoom
Battery
16
161
00:01:40 (hour : minute : second)
17
18
19
20
p.33
p.17
p.51
p.51
Aperture value
F5.6
Shutter speed
1/250
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting recording mode
Recording a still image
1. Insert the batteries (p.17).
Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.20).
3. Close the memory card cover.
4. Slide the power switch to turn on the camera.
5. Select the PROGRAM mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by
using either the viewfinder or LCD monitor.
PROGRAM mode
7. Press the shutter button to capture an image.
[DELETE] message may be displayed after taking a picture.
Refer to p.93 for more information about [DEL. ANSWER].
PROGRAM mode
NOTICE
A Blinking autofocus indicator lamp means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image clearly.
INFORMATION
Manner mode
Pressing the power button over 2 seconds changes the buzzer and start-up sound setting to
OFF, though you have set the settings to ON. If you wish to hear the buzzer sound and start-
up sound, set the [SOUND] and [S.SOUND] settings in the SETUP mode to ON.
There are two LED lamps (one green, one red) positioned next to the viewfinder.
- If the camera is in focus when you press the shutter button halfway, the green LED will
illuminate and you can take an image. If the camera can focus on the subject, the
autofocus frame in the center of the LCD monitor will change from white to green.
- If the red lamp illuminates, the flash can fire.
- If the red lamp blinks, the flash is being charged.
- When an image is being stored onto the memory card, the green lamp blinks slowly. When
the image data has been stored, the green LED light will go out. After the green LED light
has gone out, you can resume taking images.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting recording mode
Recording a Movie clip
Steps from 1-4 are the same as those for recording a still image.
5. Select the MOVIE CLIP mode by rotating the mode dial.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time allows.
Movie clips will still be recorded if the shutter button is
released.
MOVIE CLIP mode
If you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : 288 x 208
- File type
: *.AVI
MOVIE CLIP mode
INFORMATION
The available recording time may vary depending on shooting conditions and camera settings.
Recording audio
Steps from 1-4 are the same as those for recording a still image.
5. Select the VOICE RECORDING mode by rotating the mode dial.
6. Press the shutter button to record audio.
- Press the shutter button once and audio is recorded for as
long as the available recording time allows. The recording
time will be displayed on the LCD monitor.
VOICE RECORDING mode
- Audio will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button again.
VOICE RECORDING mode
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting recording mode
INFORMATION
A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
NOTICE
Camera shake warning.
When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change the flash mode to flash shot mode.
Backlight compensated shots
When taking an outdoor shot, avoid facing the sun, as the image may be dark because of
the strong backlight. In backlight conditions, please use the exposure compensation in the
PROGRAM or A/S/M mode. (refer to page 51).
Avoid obstructing the lens or the flash when you capture an image.
As there can be some differences between what is seen through the Viewfinder and the
resulting image when taken at a range closer than 1.5m, it is recommended that you use the
LCD monitor to compose these shots.
Using the LCD monitor extensively will drain the batteries.
We recommend turning off the LCD monitor and using the optical viewfinder as often as
possible in order to extend battery life.
Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- The subject is too dark.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the camera button to adjust the camera
LCD button
You can check the recording status in the LCD monitor.
Pressing the LCD button in the RECORDING (EASY,
PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MOVIE CLIP,
My SET) mode will change the display as shown below.
Pressing the
LCD button
Pressing the
LCD button
Pressing the
LCD button
Image & full information
Image & basic information
LCD off
SHUTTER button
Used for taking an image or recording audio in the RECORDING
(EASY, PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MOVIE
CLIP, USER SET, VOICE RECORDING) mode.
In EASY, PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M,
MySET mode
- Pressing the shutter button down halfway activates the
autofocus and checks the condition of the flash.
- Pressing the shutter down fully takes the image and stores the relevant data regarding the shot.
In MOVIE CLIP, VOICE RECORDING mode
- Pressing the shutter down fully takes the movie clip or records the audio. Press the shutter button
once and the movie clip or the audio is recorded for as long as the available recording time allows.
Movie clips or audio will still be recorded if the shutter button is released. If you wish to stop
recording, press the shutter button again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
WIDE / TELE button
Used for digital or optical zooming in / out.
This camera has a 3X optical zoom and a 4X digital zoom function. Using both will offer a total zoom
ratio of 12X.
When you press the zoom (W/T) button, the zoom bar will display in the upper centre of the LCD monitor.
Zoom TELE
Optical zoom TELE
- Pressing the zoom button T.
This will zoom into the subject i.e. the subject will appear nearer.
Digital zoom TELE
- When the maximum (3X) optical zoom is selected, pressing the zoom button T activates the digital
zoom software.
- Releasing zoom button T stops the digital zooming at the required setting.
- Once the maximum digital zoom (4X) is achieved, pressing the zoom button T will have no effect.
- You can check the digital zoom rate with the [X1.1 ~ X 4.0] numerical mark next to the zoom bar.
Pressing the
TELE button
Pressing the
TELE button
WIDE zoom
TELE zoom
Digital zoom 2.0X
INFORMATION
To use the digital zoom the LCD monitor has to be turned on.
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The digital zoom cannot be used in continuous shots, AEB shots and movie clip shots.
You may notice a decrease in image quality when using the digital zoom.
When the maximum (3X) optical zoom is selected, pressing the zoom button T increases the
digital zoom ratio by 0.1 steps.
If the movie clip is being recorded, the zoom operation cannot be activated.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WIDE / TELE button
Zoom WIDE
Optical zoom WIDE
- Pressing the zoom button W.
This will zoom out from the subject i.e. the subject will appear further away.
- Pressing the W button continuously will set the camera to its minimum zoom setting i.e. the subject
appears at its furthest from the camera.
Pressing the
WIDE button
Pressing the
WIDE button
TELE zoom
Optical zoom 2X
WIDE zoom
Digital zoom WIDE
- When the digital zoom is in operation, pressing the zoom button W will reduce the digital zooming
in steps.
- Releasing zoom button W stops digital zooming.
- Pressing the W button will reduce the digital zoom and then it will proceed to reduce the optical
zoom until the minimum setting is reached.
Pressing the
WIDE button
Pressing the
WIDE button
Digital zoom 4X
Digital zoom 2X
Optical zoom 3X
NOTICE
Take care not to touch the lens to avoid taking an unclear image and possibly causing
camera malfunction. If the image is dim, turn the camera power off and on again to modify
the lens position.
Take care not to press the lens as this may cause a camera malfunction.
When the camera is turned on, take care not to touch the camera s moving lens parts as
this may cause the resulting image to be dim and unclear.
Take care not to touch the lens during the zoom operation as this may cause damage.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
UP/ Voice memo ( ) button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor
move up or change the sub menu value.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo
button. You can add your voice to a stored still image.
Recording a voice memo
1. Rotate the mode dial to the RECORDING( except MOVIE
CLIP, VOICE RECORDING) mode.
2. Press the VOICE MEMO button.
If the voice memo indicator is displayed on the LCD monitor,
the setting is completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the
moment the picture is stored.
In the middle of the sound recording, pressing the shutter
button will stop the voice memo.
Voice memo setting
Camera working mode
EASY
Setting
PROGRAM
PORTRAIT
User can select the voice memo on / off
NIGHT SCENE
A/ S/ M, MySET
MOVIE CLIP
User can select the sound recording on / off
Not Available
VOICE RECORDING
INFORMATION
A distance of 40cm between you and the camera (microphone) is the best distance to
record a voice memo.
Voice memo function is inactivated after finishing a voice memo.
If you a record a new voice memo to an image that had a voice memo, the existing voice
memo is deleted and a new voice memo will be recorded.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MACRO (
) / SUPER MACRO (
) button
When the menu is displayed on the LCD monitor, pressing the DOWN button makes the menu
cursor move down or changes the sub menu value.
When the menu is not displayed on the LCD monitor, the button operates as the MACRO ( ) /
SUPER MACRO (
) button. The photography range is 0.06m ~ 0.8m.
Selecting the MACRO/ SUPER MACRO
1. Rotate the mode dial to the RECORDING (except PORTRAIT, NIGHT SCENE, VOICE
RECORDING) mode.
2. Press the MACRO button. The macro indicator will be displayed on the LCD monitor.
Press the MACRO button until the desired MACRO mode indicator displays on the LCD monitor.
In the MOVIE CLIP mode, only the macro mode can be used.
Selecting the macro mode
Selecting the super macro mode
3. Take a picture with the desired macro mode.
Macro mode type
Icon
Macro mode
MACRO
Definition
Used for macro shots (0.3 m ~ 0.8m).
SUPER
MACRO
Used for macro shots (0.06m ~ 0.3m).
NOTICE
The super macro can be activated only in the wide zoom mode.
You cannot use the zoom(wide/tele) button in the super macro mode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
MACRO (
) / SUPER MACRO (
) button
Macro mode setting
Camera working mode
Setting (
Normal
marked camera working mode is the default setting.)
Super macro
EASY
Macro
PROGRAM
PORTRAIT
Normal (Fixed)
Normal (Fixed)
NIGHT SCENE
A/ S/ M, USER SET
MOVIE CLIP
Normal
Normal
Macro Super macro
Macro
VOICE RECORDING
Not Available
INFORMATION
When the macro or super macro mode is selected, It is possible that camera shake will
occur. If this is the case, use a tripod to eliminate this.
When super macro is selected, the flash mode is changed to Flash off automatically.
FLASH ( ) button
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to
the main menu.
When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH (
button.
)
Selecting the flash mode
1. Rotate the mode dial to the RECORDING ( except MOVIE CLIP, VOICE RECORDING) mode.
2. Press the FLASH ( ) button until the desired FLASH
mode indicator displays on the LCD monitor.
Use the correct flash to suit the environment.
Selecting the Auto flash
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH ( ) button
Flash mode indicator
Indicator
Flash mode
Auto flash
Indicator
If the subject or background is dark, the camera flash will operate automatically.
If a subject or background is dark, the camera flash will work automatically
and will reduce the red-eye effect by using the red-eye reduction function.
Red eye
reduction
The flash fires regardless of available light. The intensity of the flash will be
controlled, according to the prevailing conditions.
The brighter the background or subject is, the less intense the flash will be.
Fill in flash
The flash will operate in conjunction with a slow shutter speed in order to obtain the
correct exposure. We recommend using a tripod. When you take an image in a low light
condition, the camera shake warning indicator (
) will display on the LCD monitor.
Slow synchro
Flash off
The flash does not fire. Select this mode when capturing images in a place or situation
where flash photography is prohibited. When you take an image in a low light condition,
the camera shake warning indicator (
) will display on the LCD monitor.
INFORMATION
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 7
seconds. If the batteries are weak, the charging time will be longer.
In super macro mode, continuous shot or AEB mode, the flash function will not operate.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH ( ) button
Flash mode setting
Camera working mode
EASY
Setting (
marked camera working mode is the default setting.)
Red eye reduction Off
PROGRAM, MySET
PORTRAIT
Auto
Red eye reduction Fill in Slow synchro Off
Red eye reduction
Fill in Off
NIGHT SCENE
A/ S/ M
Slow synchro
Off
Off
Fill in Slow synchro
MOVIE CLIP
Flash off (Fixed)
Not Available
VOICE RECORDING
NOTICE
Take photographs within the flash range.
The flash ranges are listed below.
ISO
Normal focus
MACRO
Auto
100
200
400
WIDE
TELE
WIDE
TELE
0.8 ~ 3m
0.8 ~ 2m
0.8 ~ 2.6m
0.8 ~ 1.5m
1 ~ 3.7m
1 ~ 2.1m
1 ~ 5.2m
1 ~ 2.9m
0.3 ~ 0.8m 0.3 ~ 0.8m 0.3 ~ 0.8m 0.3 ~ 0.8m
0.3 ~ 0.8m 0.3 ~ 0.8m 0.3 ~ 0.8m 0.3 ~ 0.8m
The image quality is not guaranteed if the subject is too close or highly reflective.
The LCD monitor is turned off for a while after using the flash to recharge it.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER / REMOTE button
When the menu is displayed on the LCD monitor, pressing the RIGHT button makes the cursor shift
to the sub menu.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the SELF-
TIMER ( ) / REMOTE ( ) button.
Selecting the self-timer
1. Rotate the mode dial to the RECORDING ( except VOICE RECORDING) mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.
Selecting the 2sec. self-timer mode
Selecting the remote mode
- Selecting the self-timer mode : Pressing the shutter button will allow an interval of ten seconds
before the image is taken. After that, the self-timer is cancelled.
- Selecting the remote mode
: Pressing the shutter button in the remote controller will allow an
interval of 2 seconds before the image is taken.
In the remote mode, you cannot use the shutter button.
Self-timer/ remote mode definition
Indicator
Mode
2s
Definition
Pressing the shutter button will allow an interval of 2 seconds before the image is taken.
Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
10s
Remote mode You can take a picture with the remote controller.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER / REMOTE button
Self-timer/ remote mode setting
Camera working mode
EASY
Setting (
marked camera working mode is the default setting.)
Off
Off
Off
10s self-timer Remote
PROGRAM
PORTRAIT
2s self-timer 10s self-timer Remote
Remote
NIGHT SCENE
A/ S/ M, MySET
MOVIE CLIP
Not Available
VOICE RECORDING
INFORMATION
Self-timer lamp
In 10s self-timer : For the first seven seconds, the LED blinks at one second intervals.
For the final three seconds, the LED blinks quickly at 0.5 second intervals.
In 2s self-timer : The LED blinks at 2second intervals.
If you operate the Power switch, Mode dial, and Self-timer button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
Remote control range
When you take a picture by using the
remote control, refer to the illustration
as shown alongside about the remote
control range.
Shutter button on the remote control
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER/ REMOTE button
Changing the remote controller battery
Contact your dealer or Samsung camera service center to buy the battery. The battery type is
CR2050S 3V.
MENU/ OK button
MEMU button
- When you press the MENU button, a menu related to each camera mode will be displayed on the
LCD monitor. Pressing it again will return the LCD to the initial display.
- A menu option can be displayed when the following are selected.
EASY, PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MOVIE CLIP and MySET.
There is no menu available when the VOICE RECORDING mode is selected.
PROG
SETUP
MyCAM
2272x1704
NORMAL
MULTI
SIZE
Pressing the
MENU button
QUALITY
METERING
SHOOTING
SINGLE
EXIT:MENU
PAGE:
menu on
menu off
OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting the cursor to the
sub menu or for confirming data.
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed.( when the green LED next to the viewfinder blinks)
- When there is no battery capacity.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter button i.e.
take an image. To take an image, simply cancel the menu display by pressing the MENU button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MF button
In dark conditions, the autofocus may not function. If this occurs, press the MF button and you can
select manual focus.
After changing the focus manually, the image can be dim. Take care when using this function.
While pressing the MF button, the MF bar will be displayed on
the LCD monitor.
While pressing the MF button, select desired focus value by
pressing the UP/ DOWN button and take a picture.
- Pressing the UP button
: Focus at long range.
- Pressing the DOWN button : Focus at close range.
Pressing the MF button
Release the MF button and the MF bar will disappear. If you
change the focus value, the MF indicator will be displayed at
the bottom of the LCD monitor.
After changing the focus value
INFORMATION
If you didn’t change the focus value while pressing the MF button, the auto focus is activated.
The manual focus function is disabled in the EASY and VOICE RECORDING mode.
The MF bar is divided into 3 parts according to the photography range.
Part of the MF bar
1st part
Photography range
0.8m ~ infinity
0.3m ~ 0.8m
2nd part
3rd part (only in wide zoom mode)
0.06m ~ 0.3m
When the photography range is within 0.06m ~ 0.3m, the flash mode is changed to FLASH
OFF automatically.
When you press the MF button, the numerical indicators will display on the right side of the
LCD monitor. The figures are distances from the camera lens.
The numerical indicators are just for your reference. Focus the subject by using the LCD
monitor when using the manual focus.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
+/- button
This camera automatically adjusts the exposure according to the ambient lighting conditions.
However, you can select the exposure value by using this button.
You can select the shutter speed and aperture value in the A/S/M mode.
In the PROGRAM, PORTRAIT, MySET mode
- While pressing the +/- button, select the desired exposure
value by pressing the LEFT/ RIGHT button.
RECORDING mode
Aperture priority mode( A )
- While pressing the +/- button, select the desired aperture
value by pressing the UP/ DOWN button.
- While pressing the +/- button, select the desired exposure
value by pressing the LEFT/ RIGHT button.
Aperture priority mode
Shutter priority mode( S )
- While pressing the +/- button, select the desired shutter
speed by pressing the UP/ DOWN button.
- While pressing the +/- button, select the desired exposure
value by pressing the LEFT/ RIGHT button.
Shutter priority mode
44
Download from Www.Somanuals.com. All Manuals Search And Download.
+/- button
Manual mode( M )
- While pressing the +/- button, select the desired shutter speed by
pressing the UP/ DOWN button.
- While pressing the +/- button, select the desired aperture value by
pressing the LEFT/ RIGHT button.
In the manual mode, the exposure value can’t be compensated.
Refer to page 51 for information on selecting the aperture priority /
shutter priority / manual mode.
Manual mode
INFORMATION
If you change the exposure value, the expose indicator (
) will be displayed on the bottom
of the LCD monitor.
When the camera is turned on again, the exposure compensation setting returns to 0.0EV
(discarding the exposure compensation).
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
If you increase the exposure value, the image will be brighter. If you decrease the exposure
value, the image will be darker.
The aperture value (Av) or shutter speed (Tv) can be selected according to the P/A/S/M
mode in the MySET mode.
Decreasing or increasing the exposure value may lead to images being under or over
exposed (too dark or too bright).
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LCD monitor to adjust the camera
Using the LCD monitor to adjust the camera
- Recording functions can be changed by using the LCD monitor.
-
In the RECORDING (EASY, PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MOVIE CLIP, MySET,
VOICE RECORDING) mode, pressing the MENU button displays the menu on the LCD monitor.
- The following functions are available, depending on the mode you have selected.
Main menu
SIZE
Sub menu
PRINT( 2272 x 1504 /SUPER FINE)
MEMO( 1120 x 840 /FINE)
E-MAIL( 544 x 408 /NORMAL)
2272 x 1704
Secondary menu
Camera working mode
EASY
PROGRAM, PORTRAIT,
NIGHT SCENE, A/S/M,
MySET 1/2/3
2272 x 1504
1120 x 840
544x 408
QUALITY
TIFF
PROGRAM, PORTRAIT,
NIGHT SCENE, A/S/M,
MySET 1/2/3
SUPER FINE
FINE
NORMAL
P/A/S/M
A/S/M
P/A/S/M
MySET 1/2/3
APERTURE PRIORITY
SHUTTER PRIORITY
MANUAL
A/S/M, MySET 1/2/3
METERING
MULTI
PROGRAM, PORTRAIT,
A/S/M, MySET 1/2/3
SPOT
SHOOT MODE
SINGLE
EASY, PROGRAM,
CONTINUOUS
PORTRAIT, MySET 1/2/3
# of prints
±0.5 EV
AEB
EASY, PROGRAM,
PORTRAIT, MySET 1/2/3
PROGRAM, A/S/M([AUTO]
is not available), MySET
1/2/3
ISO
AUTO
100
200
400
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LCD monitor to adjust the camera
Main menu
Sub menu
Secondary menu
Camera working mode
PROGRAM, A/S/M,
WHITE BALANCE
AUTO
DAYLIGHT
CLOUDY
FLUORESCENT
TUNGSTEN
NORMAL
BLACK & WHITE
sRGB
MOVIE CLIP, MySET 1/2/3
EFFECT
PROGRAM, A/S/M, MOVIE
CLIP, MySET 1/2/3
SUNSET
SHARPNESS
SOFT
PROGRAM, A/S/M,
NORMAL
VIVID
MOVIE CLIP, MySET 1/2/3
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed. ( when the green LED next to the viewfinder blinks)
- When there is no battery capacity.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the menu
Every camera working mode has [SETUP] and [MyCAM] tabs in their own menu.
The main menus of the first tab are changed by different camera working modes.
1. Turn the camera power on and press the menu button. There are 3 tabs related to each camera
mode in the menu. There is no menu available when the VOICE RECORDING mode is selected.
2. Shift the tab cursor by pressing the LEFT/ RIGHT button.
PROG
SETUP
MyCAM
PROG
SETUP
MyCAM
PROG
SETUP
MyCAM
Pressing the
Pressing the
LEFT / RIGHT button
LEFT / RIGHT button
SIZE
2272x1704
FINE
MULTI
FILE
SERIES
OFF
ENGLISH
NO
S.IMAGE
S.SOUND
SH.SOUND
IMAGE1
SOUND1
SH.SOUND1
QUALITY
METERING
SHOOTING
PWR OFF
LANGUAGE
FORMAT
SINGLE
EXIT:MENU
EXIT:MENU
EXIT:MENU
PAGE:
PAGE:
PAGE:
RECORDING mode
SETUP mode
MyCAM mode
3. Select a menu by pressing the UP/ DOWN button.
PROG
SETUP
MyCAM
PROG
SETUP
MyCAM
PROG
SETUP
MyCAM
Pressing the
Pressing the
UP/ DOWN button
LEFT/ RIGHT button
SIZE
2272x1704
FINE
MULTI
SIZE
2272x1704
FINE
MULTI
SIZE
TIFF
S.FINE
FINE
QUALITY
METERING
SHOOTING
QUALITY
METERING
SHOOTING
QUALITY
METERING
SHOOTING
SINGLE
SINGLE
NORMAL
SET:OK
MOVE:
CHANGE:
MOVE:
CHANGE:
BACK:
4. Shift the cursor to the sub menu by pressing the RIGHT button. To shift the cursor to the main menu,
press the LEFT button.
5. Select the desired sub menu by pressing the UP/ DOWN button. If there is another menu under the
sub menu, press the RIGHT or OK button and the cursor shifts to another sub menu.
To shift the cursor to the previous menu or cancel the menu setting, press the LEFT button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Size
You can select the image size you require.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select [SIZE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [SIZE] sub menu.
EASY mode
Select the desired sub menu by pressing the UP/DOWN button.
- PRINT :
- MEMO :
- E-MAIL :
Taking a picture for printing
(2272 X 1504 / Super fine)
Taking a picture for a web site image
(1120 X 840 / Fine)
EASY
SETUP
MyCAM
PRINT
SIZE
SHOOTING
MEMO
E-MAIL
Taking a picture for e-mail
(544 X 408/ Normal)
SET:OK
BACK:
PROGRAM, PORTRAIT, NIGHT SCENE, A/S/M, MySET 1/ 2/ 3 mode
Select the desired sub menu by pressing the UP/DOWN button.
-
-
-
-
2272x1704 (LARGE)
2272x1504 (PHOTO)
1120x840 (MEDIUM)
544x408 (SMALL)
PROG
SETUP
MyCAM
SIZE
2272x1704
2272x1504
1120x840
544x408
QUALITY
METERING
SHOOTING
SET:OK
BACK:
5. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be disappeared. Take a picture.
INFORMATION
A large image uses more memory, so increasing the image size will reduce the total number
of shots you can store in the memory.
Even though the camera is restarted, the image size setting is maintained.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality
In RECORDING mode, you can select the image quality (Data compression rate).
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Select [QUALITY] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
PROG
SETUP
MyCAM
TIFF
[QUALITY] sub menu.
SIZE
5. Select the desired sub menu by pressing the UP/DOWN button.
QUALITY
METERING
SHOOTING
S.FINE
FINE
- TIFF
: TIFF
- FINE
:
NORMAL
- SUPER FINE :
- NORMAL :
SET:OK
BACK:
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will
disappear. Take a picture.
INFORMATION
The higher the QUALITY setting, the better the final image will be. However, the high quality setting will
require more memory and therefore reduce the number of images you can store on the memory.
SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting
appropriate for your needs.
The image file is stored in *.jpg (Default). But, if you select TIFF in the quality menu, the
image file is stored in *.tif.
TIFF format is an uncompressed image file format for an expert. If you take a picture with the
TIFF file format, the number of available shots is decreased and the time for recording the
image file will be longer because the TIFF file size is bigger than the JPG file format.
When the TIFF file is being recorded to the memory card, a [PLEASE WAIT!] message will
be displayed on the LCD monitor.
This file format complies with DCF(Design rule for Camera File system).
Even if the camera should be restarted, the quality setting is maintained.
But, if you select TIFF quality, the quality setting will be changed to FINE after restarting the camera.
When using the 32MB SD memory card, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance)
QUALITY
TIFF
IMAGE SIZE
L
P
2
M
8
S
2
35
Super fine
Fine
12
25
38
14
29
43
53
225
451
676
106
159
Normal
50
Download from Www.Somanuals.com. All Manuals Search And Download.
A / S / M
In this mode you can select the shutter speed or aperture value to your preference.
1. Rotate the mode dial to the A/ S/ M mode and press the
MENU button.
A/S/M
SETUP
MyCAM
SIZE
2272x1704
FINE
2. Press the DOWN button and the cursor will be shifted to the
main menu.
QUALITY
A/S/M
A
METERING
MULTI
3. Select [A/S/M] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [A/S/M]
sub menu.
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
Aperture priority ( A ) :
A/S/M
SETUP
MyCAM
You can select the aperture value in this mode.
The camera calculates the best shutter speed automatically
to the proper exposure value.
SIZE
QUALITY
A/S/M
A
S
METERING
M
Shutter priority ( S ) :
SET:OK
BACK:
You can select the shutter speed in this mode.
The camera calculates the best aperture value automatically
to the proper exposure value.
Manual ( M ) :
You can select the shutter speed and the aperture value in this mode.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
After pressing the shutter button half way down, the values that were changed in the A/S/M
mode will be applied to the picture.
If the aperture value or shutter speed is out of the limit of application, the value that is displayed
on the LCD monitor will show as red. However, you will still be able to take a picture.
It warns that : To be the properly exposed, the aperture value
should be smaller than F 2.8. The minimum aperture
value that you can select is F 2.8.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
A / S / M
Aperture priority mode ( A )
- The small aperture value is used for portraits to separate the
subject from the background.
The large aperture value is used for landscape photographs to
keep the foreground and background in focus.
- While pressing the +/- button, select the desired aperture
value by pressing the UP/ DOWN button.
- To change the exposure value, press the LEFT/ RIGHT
button by pressing the +/- button.
- Point the camera towards the subject and compose the image
and take a picture.
Shutter priority mode ( S )
-
Fast shutter speeds are used in sport photography to capture
action shots. Slow shutter speeds can be used to show the flow
of motion such as water cascading over a waterfall.
- While pressing the +/- button, select the desired shutter speed
by pressing the UP/ DOWN button.
- To change the exposure value, press the LEFT/ RIGHT
button by pressing the +/- button.
- Point the camera towards the subject and compose the image
and take a picture.
Manual mode ( M )
- You can select the shutter speed and the aperture value in
this mode.
- While pressing the +/- button, select the desired shutter speed
by pressing the UP/ DOWN button.
- While pressing the +/- button, select the desired aperture
value by pressing the LEFT/ RIGHT button.
- Point the camera towards the subject and compose the image
and take a picture.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Metering
When the camera cannot calculate a desired exposure, you can change the metering method.
1. Rotate the mode dial to the RECORDING mode and press the
PROG
SETUP
MyCAM
MENU button.
SIZE
2272x1704
FINE
2. Press the DOWN button and the cursor will be shifted to the
main menu.
QUALITY
METERING
SHOOTING
MULTI
3. Select the [METERING] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
[METERING] sub menu.
SINGLE
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
- Multi pattern metering :
PROG
SETUP
MyCAM
Exposure will be calculated based on an average of the
available light in the image area. However, the calculation will
be biased towards the centre of the image area.
- Spot metering :
SIZE
QUALITY
MULTI
SPOT
METERING
SHOOTING
SET:OK
BACK:
Use this function when there is backlight or when
photographing a subject that has little contrast. In backlighting
conditions adjust the light metering to suit the subject matter.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
The default metering mode is Multi pattern metering.
If the subject is not the centre of the focus, do not use the spot metering as there may be an
exposure error. In this case, use exposure compensation.
When the power is turned off, the changed setting value returns to the initial value.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting
You can select the continuous shooting or AEB shooting in this menu.
AEB is not available in the A/S/M mode.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
PROG
SETUP
MyCAM
[SHOOTING] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
- SINGLE : you can take only one picture at a time.
SIZE
QUALITY
METERING
SHOOTING
SINGLE
CONTINUOUS
AEB
- CONTINUOUS :
In this mode, you can capture moving
subjects continuously.
SET:OK
BACK:
- AEB (Auto Exposure Bracket) :
In this mode, you can take a
3-image bracket of a scene.
There is an over exposed image, normally exposed image and
under exposed image in a bracket.
When you select continuous shot or AEB, you can select the exposure bracket and the number of
continuous shots in [SHOOTING] sub menu.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
The flash mode is set to “flash off” in continuous shooting and AEB shooting. After completing the
continuous or AEB shot, the shooting mode is changed to [SINGLE] automatically.
Once a continuous sequence has begun, it will continue until the selected number of shots
has been taken. Releasing the shutter button will not interrupt this function.
The maximum number of shots in a sequence is governed by the image settings.
Using a 32MB SD memory card, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance)
Quality
TIFF
Size
Large
N/A
3
Photo
N/A
3
Medium
N/A
14
Small
N/A
59
Super fine
Fine
6
7
28
99
Normal
10
11
42
99
If you change the image size or quality after selecting the continuous shot or AEB shot, the
shooting mode will be turned to single shot mode automatically.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting
INFORMATION
Continuous and AEB shots cannot be selected in the TIFF image quality format.
To take the continuous shot, the number of available shots must be more than 2 because
the minimum number of the continuous shots are 2. To take the AEB shots, the number of
available shots must be more than 3 because of the same reason.
Camera shake can be a problem when using the AEB shooting mode and it takes time to
store the AEB image to the memory. We recommend using a tripod.
ISO
You can select the camera’s sensitivity to light by selecting the ISO sub menu. The speed or specific
light-sensitivity of a camera is rated by ISO numbers.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.
5. Select the [ISO] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [ISO] sub menu.
PROG
SETUP
MyCAM
AUTO
7. Select the desired sub menu by pressing the UP/DOWN button.
ISO
- AUTO
: The camera's sensitivity is automatically
changed by variables such as lighting value or
subject brightness.
W.B
100
200
400
EFFECT
SHARP
- 100/ 200/ 400 : In the same lighting conditions, the higher the
ISO value is, the faster the shutter speed will
SET:OK
BACK:
be. However, the images can be saturated in very bright conditions.
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
The higher the number, the more sensitive it is to light. As with film, the higher speeds
usually induce more electronic noise so the image gets grainier.
When the power is turned off, the changed setting value returns to the initial value.
[AUTO] is not applied to A/S/M mode.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
The white balance control allows you to adjust the colors to appear more natural looking.
1. Rotate the mode dial to the RECORDING mode and press the
PROG
SETUP
MyCAM
MENU button.
SIZE
2272x1704
FINE
2. Press the DOWN button and the cursor will be shifted to the main
menu.
QUALITY
METERING
SHOOTING
MULTI
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next
menu page will be displayed.
SINGLE
EXIT:MENU
PAGE:
5. Select the [W.B] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [W.B] sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
PROG
SETUP
MyCAM
- AUTO
: The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
ISO
AUTO
W.B
DAYLIGHT
CLOUDY
FLUOR.
EFFECT
SHARP
- DAYLIGHT
- CLOUDY
:
:
For taking images outside.
For taking images under a cloudy and
overcast sky.
SET:OK
BACK:
- FLUOR.
:
:
For shooting under fluorescent lighting.
- TUNGSTEN
For shooting under tungsten (standard light bulb) lighting.
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear. Take a picture.
INFORMATION
Different lighting conditions may cause a color cast on your images.
When the power is turned off, the changed setting value returns to the initial value.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Effect
Using the camera’s digital processor, it is possible to add special effects to your images.
1. Rotate the mode dial to the RECORDING mode and press the
MENU button.
PROG
SETUP
MyCAM
SIZE
2272x1704
FINE
2. Press the DOWN button and the cursor will be shifted to the main menu
.
QUALITY
METERING
SHOOTING
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next
menu page will be displayed.
MULTI
SINGLE
EXIT:MENU
PAGE:
5. Select the [EFFECT] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [EFFECT]
sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
- NORMAL : No effect is added to the image.
PROG
SETUP
MyCAM
ISO
NORMAL
B & W
- B & W
- sRGB
: Converts the image to black and white.
: sRGB is a device independent standard color
model. Devices supporting sRGB can display the
exact image color.
W.B
EFFECT
SHARP
sRGB
SUNSET
SET:OK
BACK:
- SUNSET : Used for capturing images at sunset
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Take a picture.
INFORMATION
When the power is turned off, the changed setting value returns to the initial value.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
You can select the sharpness of still image.
1. Rotate the mode dial to the RECORDING mode and press the
MENU button.
PROG
SETUP
MyCAM
SIZE
2272x1704
FINE
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next
menu page will be displayed.
QUALITY
METERING
SHOOTING
MULTI
SINGLE
EXIT:MENU
PAGE:
5. Select the [SHARP] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [SHARP] sub menu.
7. Select the desired sub menu by pressing the UP/DOWN button.
- SOFT
- NORMAL :
- VIVID
:
This gives smooth edges and the final image
will have a soft appearance.
PROG
SETUP
MyCAM
ISO
This setting will give a standard finish to the
final image.
W.B
SOFT
EFFECT
SHARP
NORMAL
VIVID
:
This will give the image a crisp and clear
appearance.
SET:OK
BACK:
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Take a picture.
INFORMATION
When the power is turned off, the changed setting value returns to the initial value.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
My SET mode menu
You can select your favorite settings and save them in this menu
Main menu
MODE
Sub menu
MYSET1
MYSET2
MYSET3
NO
CHANGE
YES
Mode
You can select your favorite settings that have been saved in this menu.
1. Rotate the mode dial to the MySET mode and press the
MENU button.
MySET
SETUP
MyCAM
MODE
MYSET1
NO
2. Press the DOWN button and the cursor will be shifted to the
main menu.
CHANGE
3. Select the [MODE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
[MODE] sub menu.
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN
button.
MySET
SETUP
MyCAM
MODE
MYSET1
MYSET2
MYSET3
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will
disappear. Take a picture
CHANGE
To apply this function to the camera, change the MySET
mode menu or press the DOWN button and select the
CHANGE menu.
SET:OK
BACK:
Refer to the CHANGE menu.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Change
The loaded My SET setting will be applied to the camera from this menu.
1. Rotate the mode dial to the MySET mode and press the MENU button.
MySET
SETUP
MyCAM
2. Press the DOWN button and the cursor will be shifted to the main
menu.
MODE
MYSET1
NO
CHANGE
3. Select the [CHANGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [CHANGE]
sub menu.
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
- Selecting [NO] : The My SET menu will not be changed.
- Selecting [YES] : You can change your favorite menus.
Refer to page 49 ~ 58 for information about
the menus.
MySET
SETUP
MyCAM
MODE
CHANGE
NO
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Take a picture
YES
SET:OK
BACK:
INFORMATION
P/A/S/M in the main menu stands for Program mode(P), Aperture priority(A), Shutter priority(S)
and Manual mode(M). You can save one of the camera modes in the My SET mode.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Play mode
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the play mode
Turn the camera on and select the Play mode by pressing the play mode button (
The camera can now play back the images stored in a memory.
).
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
Playing back a still image
1. Select the PLAY mode by pressing the play mode button.
2. The last image stored on the memory is displayed on the
LCD monitor.
3. Select an image that you want to play back by pressing
the LEFT / RIGHT button.
INFORMATION
Even if the camera’s power is off, you can start the play mode by pressing the play mode button.
The LCD monitor will remain in operation until the camera is switched off in PLAY mode.
To turn off the camera power, slide the power switch.
The menu will not display on the LCD monitor under the following circumstances:
- When another button is being pressed.
- While image data is being processed
- When there is no battery capacity.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still image.
3. Select the recorded movie clip that you want to play back by using
the LEFT/RIGHT button. If you select a movie clip, the movie clip
indicator (
) will be displayed on the LCD monitor.
4. Press the play & pause button (
clip file.
) to play back a movie
- To pause while playing back a movie clip file, press the play
& pause button again.
-
Press the play & pause button and the movie clip file will restart.
- To stop play back, press the LEFT/RIGHT button.
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (
the LCD monitor.
) will be displayed on
4. Press the play & pause button (
recorded voice.
) to play back a
- To pause playing back a recorded voice, press the play &
pause button again.
- Press the play & pause button and the recorded voice
will restart.
- To stop play back, press the LEFT/RIGHT button.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor indicator
The LCD monitor displays information about the shooting conditions.
No.
1
Description
Icons
Page
Play mode
Movie clip
2
3
Voice memo
p.67
p.73
4
Protect indicator
DPOF indicator
Recording date
Stored image number
Battery
5
p.76~78
6
2004/04/01
6
7
8
9
Voice recording
p.30
SIZE
AV
2272X1704 : image size
SIZE : 2272X1704
AV : F2.8
TV : 1/60
ISO : 100
FLASH : OFF
DATE : 2004/04/01
F2.8
1/60
100
: aperture value
: shutter speed
: ISO sensitivity
TV
ISO
FLASH OFF
: Whether using the flash or not
DATE 2004/04/01 : recording date
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Information button
The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the LCD monitor.
Pressing the LCD button in the PLAY mode will change the display as shown below.
Pressing the
information
button
Pressing the
information
button
Pressing the
information
button
SIZE : 2272X1704
AV : F2.8
TV : 1/60
ISO : 100
FLASH : OFF
DATE : 2004/04/01
Image & Icons
Image & information
Image only
Thumbnail & Wide / Tele & Trimming button
You can view up to 9 images at a time and trim an image.
The last image stored on the memory is displayed on the LCD monitor.
Press the 5 function button and you can play back another image.
Thumbnail button (
)
- Press the thumbnail button.
- The thumbnail display will highlight the image that had been showing at the time the thumbnail
mode was selected.
- Press the 5 function button to move to a desired image.
- To view an image separately, press the enlargement button (
).
Pressing the thumbnail
(
) button
press the enlargement
) button
(
Highlighted image
Normal display mode
Thumbnail display mode
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail / Enlargement / Trimming button
Image enlargement
- Select an image that you want to enlarge and press the
enlargement button.
- Different parts of the image can be viewed by pressing the 5
function button.
- Pressing the thumbnail button will zoom back to the original full
sized image.
-
The location indicator is in the bottom left side of the LCD monitor.
Trimming : You can extract part of the image that you want and
save it separately.
- Select a section that you want to trim by pressing the 5 function
button. Press the OK button and a message will be displayed as
shown alongside.
- Select [YES] or [NO] by pressing the LEFT/ RIGHT button and
press the OK button.
Selecting [YES] : a trimmed image that has the latest file name
will be displayed on the LCD monitor.
Selecting [NO] : an initial image will be displayed.
INFORMATION
The maximum enlargement rate in proportion to the image size.
Image size
Large (Photo)
X8.3
Middle
X4.3
Small
X2.1
Maximum enlargement rate
If an image is enlarged, the enlargement indicator will be displayed in the bottom left of the
LCD monitor.
Movie clip, TIFF and WAV files can’t be enlarged.
You may notice a decrease in image quality when you enlarge them.
The image size of the trimmed image cannot be defined as it extracts only the part of the
image displayed on the LCD monitor.
If there is little memory space to save the trimmed image, the image can’t be trimmed.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
UP / Voice memo button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor
move up or change the sub menu value.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button.
You can add your audio to a stored still image.
1. Press the play mode button.
2. Press the 5 function button to select an image that you wish to
add sound to.
3. Press the voice memo button (
) and the voice memo
indicator will display. The camera is now ready to record audio.
4. Press the shutter button to start recording.
The [RECORDING] message will be displayed on the LCD
monitor (as shown) and audio is recorded to the still image for
10 seconds.
5. Recording can be stopped by pressing the shutter button again.
6. [
] icon will be displayed on the LCD monitor after finishing
the voice memo.
INFORMATION
Audio can’t be recorded onto a movie clip file.
When you press the shutter button to stop the audio recording, press the shutter button
halfway and the buzzer sound will not be recorded.
A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
DOWN / LEFT / RIGHT button
DOWN / LEFT / RIGHT buttons activate the following.
DOWN button
When the menu is displayed on the LCD monitor, pressing the DOWN button makes the menu
cursor move down or change the sub menu value.
LEFT button
When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to
the main menu.
RIGHT button
When the menu is displayed on the LCD monitor, pressing the RIGHT button makes the cursor shift
to the sub menu.
MENU / OK button
MENU button
When you press the MENU button, the play mode menu will be displayed on the LCD monitor.
Pressing it again will return the LCD to the initial display.
OK button
When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is
changed by using the 5 function button.
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed. (when the green LED next to the viewfinder blinks)
- When there is no battery capacity.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETE ( ) button
This deletes an image stored on the memory card.
1. Press the play mode button.
2. Press the LEFT/ RIGHT button to select the image that you
want to delete, and press the delete (
) button.
3. A message as shown alongside will be displayed on the LCD monitor.
4. To cancel the deletion, press the LEFT button.
Press the OK button and a message as shown alongside will be
displayed on the LCD monitor.
Select [DELETE] or [CANCEL] by pressing the UP/DOWN
button and press the OK button.
Selecting [DELETE] : Once an image has been deleted, the
previous image in the sequence will
appear on the LCD monitor.
Selecting [CANCEL] : The image will be displayed on the LCD monitor.
NOTICE
Before deleting an image from the camera, you should download (p.100) the image to your
computer or protect (p.73) the image, if you want to keep it.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY & PAUSE (
) button
When the menu is not displayed on the LCD monitor, press the PLAY & PAUSE button to play and
pause the movie clip, or a still image that has a voice memo or audio recording file.
1. Press the play mode button.
2. Press the LEFT/ RIGHT button to select an image that has
voice memo, movie clip or audio recording file.
3. Pressing the PLAY & PAUSE button activates the following.
- If an image is showing, but there is no sound (or movement) : Plays the sound clip or starts the
movie clip.
- If the image is playing : The progress is paused.
-
If the PLAY & PAUSE button is pressed when the image is paused, the sound or movement will resume.
Initial play mode
Playing
Pause
To select another image, pause the progress and press the LEFT/RIGHT button.
INFORMATION
The selected image plays back as a single image display.
When the image is playing, the play & pause button, power switch and mode dial can be activated.
When the image is paused, the left/ right button, power switch and mode dial can be activated.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor.
In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor.
Main menu
SLIDE SHOW
Sub menu
Secondary menu
OFF, 01 ~ 10 SEC.
(Default : OFF)
REPEAT
ON
OFF
PROTECT
ONE PICTURE
ALL PICTURES
UNLOCK
LOCK
UNLOCK
LOCK
RESIZE
1024 x 768
640 x 480
320 x 240
LOGO
DELETE ALL
STANDARD
NO
YES
ONE PICTURE
00 ~ 30 PRINTS
ALL PICTURES
00 ~ 30 PRINTS
INDEX PRINT
CANCEL
NO
YES
STANDARD
INDEX
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
PLAY
SETUP
MyCAM
2. Press the DOWN button and the cursor will be shifted to the main menu.
SLIDE
3. Select the [SLIDE] menu by pressing the UP/DOWN button.
PROTECT
01 SEC
4. Press the RIGHT button and the cursor will shift to the [SLIDE]
sub menu.
RESIZE
DEL. ALL
5. Select the desired sub menu by pressing the UP/DOWN button.
- If you select [01 ~ 10SEC], you can select the [REPEAT]
secondary menu.
SET:OK
BACK:
Select [01 ~ 10SEC] and press the RIGHT button and the cursor
will shift to the secondary menu.
PLAY
SETUP
MyCAM
SLIDE
REPEAT
6. Select the desired menu by pressing the UP/DOWN button.
- [OFF] : If a cycle is completed, the slide show will stop
automatically.
PROTECT
RESIZE
DEL. ALL
OFF
ON
SET:OK
- [ON] : Even once a cycle(from the first image to the last
image) is completed, the slide show will continue to
repeat itself.
BACK:
7. Press the OK button to confirm the setting.Press the menu button twice and the slide show will start.
8. To pause the slide show, press the play & pause button. To start the slide show again, press the
play & pause button again. Press the menu button twice again and the slide show will stop.
INFORMATION
The default is OFF and the loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [POWER OFF] function can’t be activated. While the slide show is playing, only the first
frame of an AVI file is displayed.
If there is only an image in the memory card, the slide show will not start.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect
This is used to protect specific shots from being accidentally erased (LOCK).
It also releases images that have been previously protected (UNLOCK).
1. Press the play mode button and press the menu button.
PLAY
SETUP
OFF
MyCAM
2. Press the DOWN button and the cursor will be shifted to the main menu.
SLIDE
3. Select the [PROTECT] menu by pressing the UP/DOWN button.
PROTECT
LOCK
LOGO
NO
4. Press the RIGHT button and the cursor will shift to the
[PROTECT] sub menu.
RESIZE
DEL. ALL
5. Select the desired sub menu by pressing the UP/DOWN button.
- [ONE PIC.] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
EXIT:MENU
PAGE:
PLAY
SETUP
MyCAM
- [ALL PICS.] : All of the stored images are protected or
unprotected.
SLIDE
ONE PIC.
ALL PICS.
PROTECT
RESIZE
DEL. ALL
6. Select [LOCK] or [UNLOCK] by pressing the UP/ DOWN button
and press the OK button.
- [UNLOCK] : Discards the protect function.
SET:OK
BACK:
- [LOCK]
: Sets up the PROTECT function.
If you need to protect another image, press the LEFT/ RIGHT
button.(In case of selecting [ONE PIC]
7. Press the shutter button and the menu will disappear. If you
protect an image, the protect icon will be displayed on the LCD
monitor. (An unprotected image has no indicator)
UNLOCK
EXIT:SHUTTER
MOVE PIC. :
SET:OK
NOTICE
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Resize
The stored image size can be changed and used as logo image.
The resized image will have a new file name.
1. Press the play mode button and select an image that you want to
resize by pressing the LEFT/ RIGHT button.
PLAY
SETUP
OFF
MyCAM
SLIDE
2. Press the menu button.
PROTECT
RESIZE
DEL. ALL
LOCK
LOGO
NO
3. Press the DOWN button and the cursor will be shifted to the main menu.
4. Select the [RESIZE] menu by pressing the UP/DOWN button.
5. Press the RIGHT button and the cursor will shift to the [RESIZE]
sub menu.
EXIT:MENU
PAGE:
6. Select the desired sub menu by pressing the UP/DOWN button.
7. Press the OK button to confirm the setting.
PLAY
SETUP
MyCAM
SLIDE
1024x768
640x480
320x240
LOGO
Press the menu button twice and the menu display will disappear.
PROTECT
RESIZE
DEL. ALL
SET:OK
BACK:
NOTICE
Large sized images can be resized to be made smaller, but you may notice decreasing
image quality when a small size image is resized to become larger.
If you try to resize a Photo or Print size image, a [N/A] (Not available) sub menu will be
displayed on the menu display.
Only JPG images can be resized. TIFF, WAV files can’t be resized.
The different compression format image, however the image(.JPG file) size is in the ratio of
four to three(2272X1704, 1120X840, 544X408..etc), can’t be resized.
Only 4:2:2 compression format file can be resized.
The resized image will have a new file name.
If the memory capacity is insufficient to store the resized image, [N/A] message will display
on the LCD monitor and the resized image will not be stored.
The start-up image is stored not on the memory card but on the internal memory.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete all
This enables you to clear all unprotected images from the memory.
1. Press the play mode button and press the menu button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [DEL. ALL] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [DEL. ALL]
sub menu.
PLAY
SETUP
OFF
MyCAM
SLIDE
PROTECT
RESIZE
DEL. ALL
LOCK
LOGO
NO
5. Select the desired sub menu by pressing the UP/DOWN button
and press the OK button.
EXIT:MENU
PAGE:
- Selecting [NO] : The display returns to the initial menu.
PLAY
SETUP
MyCAM
- Selecting [YES]
:
A [PLEASE WAIT!] message will display and all
the unprotected images are deleted. If there
aren’t protected images, all the images are
deleted and a [NO IMAGE!] message will
display.
SLIDE
PROTECT
RESIZE
DEL. ALL
NO
YES
SET:OK
BACK:
6. If you select [NO], press the menu button twice and the menu
display will disappear.
If a [NO IMAGE!] message is displayed on the LCD monitor after
selecting [YES], press the play mode button or rotate the mode
dial. The message will disappear.
NOTICE
Remember that this will permanently delete unprotected images.
Important shots should be stored on a computer before deletion takes place.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF : Standard
DPOF(Digital Print Order Format) allows you to embed printing information on your memory card.
Select the pictures to be printed and how many prints to make.(Print quantity : 0 ~ 30 )
The DPOF indicator will display on the LCD monitor when an image that has DPOF information
plays back. Images can then be printed on DPOF printers, or at an increasing number of photo
laboratories.
This function is not available for Movie clips and WAV files.
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and select an image that you want to
PLAY
SETUP
MyCAM
embed a print quantity by pressing the LEFT/ RIGHT button.
2. Press the menu button.
STANDARD
INDEX
ONE PIC.
ALL PICS.
3. Press the DOWN button and the cursor will be shifted to the main menu.
4. Select the [DEL. ALL] menu by pressing the UP/DOWN button.
5. Press the DOWN button on the [DEL. ALL] menu and the next
menu page will be displayed.
CANCEL
SET:OK
BACK:
6. Select [STANDARD] menu by pressing the UP/DOWN button.
7. Press the RIGHT button and the cursor will shift to the
[STANDARD] sub menu.
8. Select the desired sub menu by pressing the UP/DOWN button.
- [ONE PIC.] : Specifies the number of copies for a selected
image. If you need to embed a print quantity on
another image, press the LEFT/ RIGHT button.
00 PRINTS
EXIT:SHUTTER
MOVE PIC. :
SET:OK
- [ALL PICS.] : Specifies the number of copies for all images
except for movie clips and voice recording files.
9. Press the OK button and a display to select the quantity will display on the LCD monitor.
10. Select the print quantity by pressing the UP/DOWN button.
11. Press the OK button to confirm the setting.
12. If an image carries DPOF instructions, the DPOF indicator (
) will show.
Press the shutter button and the camera working mode is turned to the play mode.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF : Index
This function will specify the number of copies (except for movie clips and sound clip) for index prints.
1. Press the play mode button and press the menu button.
PLAY
SETUP
OFF
MyCAM
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [DEL. ALL] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [DEL. ALL] menu and the next
menu page will be displayed.
SLIDE
PROTECT
RESIZE
DEL. ALL
LOCK
LOGO
NO
5. Select [INDEX] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [INDEX]
sub menu.
EXIT:MENU
PAGE:
PLAY
SETUP
MyCAM
7. Select the desired sub menu by pressing the UP/DOWN button.
8. Press the OK button to confirm the setting.
STANDARD
INDEX
NO
Press the menu button twice and the menu display will disappear.
CANCEL
YES
SET:OK
BACK:
INFORMATION
The number of copy is 1.
There is no indicator for the index print.
If the index print was set, the [INDEX] sub menu will be displayed as [YES] on the LCD
monitor.
The first printed image is the first stored image.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF : Cancel
This is used for canceling the STANDARD or INDEX DPOF function.
1. Press the play mode button and press the menu button.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [DEL. ALL] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [DEL. ALL] menu and the next
menu page will be displayed.
PLAY
SETUP
OFF
MyCAM
SLIDE
PROTECT
RESIZE
DEL. ALL
LOCK
LOGO
NO
5. Select [CANCEL] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [CANCEL]
sub menu.
EXIT:MENU
PAGE:
PLAY
SETUP
MyCAM
7. Select the desired sub menu by pressing the UP/DOWN button.
- [STANDARD] : Pre-set print quantity is canceled.
STANDARD
INDEX
- [INDEX]
: Index print is canceled.
CANCEL
STANDARD
INDEX
8. Press the menu button twice and the menu display will disappear.
SET:OK
BACK:
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
In this mode, you can set up basic settings.
Every camera working mode has [SETUP] tab in their own menu.
Main menu
Sub meun
Secondary menu
FILE
RESET
SERIES
POWER OFF
(Default : 3 MIN)
LANGUAGE
OFF / 1~10MIN
ENGLISH
KOREAN
CHINESE 1
CHINESE 2
JAPANESE
RUSSIAN
GERMANY
SPANISH
NO
FRENCH
ITALIAN
DUTCH
DANISH
FINNISH
SWEDISH
PORTUGUESE
FORMAT
YES
DATA SET
2004/04/01
TIME SET
DATE TYPE
12:00 AM/PM
'YY/MM/DD
MM/DD/'YY
DD/MM/'YY
OFF
IMPRINT
DATE
DATE&TIME
ON
SOUND
OFF
LCD BRIGHTNESS
LOW
NORMAL
HIGH
VIDEO OUT
QUICK VIEW
NTSC
PAL
OFF/ 1~3SEC.
DEL.ANSWER
OFF
ON
79
Download from Www.Somanuals.com. All Manuals Search And Download.
File
This enables you to name files
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FILE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [FILE] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
- [RESET] : Using reset, the next file name will be set from 0001
even after formatting, deleting all or inserting a new
memory card.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
PLAY
SETUP
MyCAM
FILE
RESET
SERIES
- [SERIES] : Under this system, the file name will directly follow
the last stored file name, regardless of any actions
such as file deletion or formatting.
PWR OFF
LANGUAGE
FORMAT
6. Press the OK button to confirm the setting.
SET:OK
BACK:
Press the menu button twice and the menu display will disappear.
INFORMATION
The first stored folder name is 100SSCAM, and first name is SV400001.
Whenever you store an image, the file number is increased by 1.
The file number is named from SV400001 to SV409999 automatically, 9999 files will be
stored in a folder.
Using SERIES, the sequence starts at 100SSCAM and increases in increments of 1.(e.g :
101SSCAM, 102SSCAM…)
The files used with the memory card conform to the DCF(Design rule for Camera File
system) format.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Power off
This function switches the camera off after a set amount of time in order to prevent unnecessary
battery drainage.
1. Press the menu button and press the RIGHT button to select
PLAY
SETUP
MyCAM
[SETUP](Second) tab.
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [PWR OFF] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [PWR
OFF] sub menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
- Selecting [OFF] : The power off function will not operate.
- Selecting [ON] : A menu will be displayed on the LCD monitor
as shown alongside.
PLAY
SETUP
MyCAM
FILE
6. Select the desired time by pressing the UP/DOWN button.
7. Press the OK button to confirm the setting.
PWR OFF
LANGUAGE
FORMAT
OFF
ON
Press the menu button twice and the menu display will disappear.
SET:OK
BACK:
PLAY
SETUP
MyCAM
FILE
PWR OFF
LANGUAGE
FORMAT
01 MIN
SET:OK
BACK:
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off setting will
be preserved.
Note that the automatic power off does not operate if the camera is in slide show or PC mode.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
There is a choice of languages that can be displayed on the LCD monitor.
1. Press the menu button and press the RIGHT button to select
PLAY
SETUP
MyCAM
[SETUP](Second) tab.
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [LANGUAGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the
[LANGUAGE] sub menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
PLAY
SETUP
MyCAM
Press the menu button and the menu display will disappear.
FILE
ENGLISH
PWR OFF
LANGUAGE
FORMAT
SET:OK
BACK:
INFORMATION
The default language is ENGLISH.
You can select 15 languages. Those are listed below.
English, Korean, T. Chinese, S. Chinese, Japanese, Russian, Germany, Spanish, French,
Italian, Portuguese, Danish, Swedish, Finnish, Dutch.
Even if the camera is restarted, the language setting will be maintained.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
This is used for formatting the memory card.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main
menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [FORMAT]
sub menu.
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
- Selecting [NO] : The image will be displayed on the LCD
monitor. Press the menu button twice and the
menu display will disappear.
PLAY
SETUP
MyCAM
FILE
PWR OFF
LANGUAGE
FORMAT
- Selecting [YES] : The memory card is formatted.
(A [NO IMAGE !] message will be displayed
after formatting in play mode)
NO
YES
SET:OK
BACK:
INFORMATION
Before using the memory card, it must be initialized.
- New memory card, unformatted memory card.
- A memory card that has a file this camera can’t recognize or one that has been taken from
another camera.
NOTICE
All the files in the memory are deleted by the [FORMAT] function. Before formatting the
memory, it is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
Do not use the memory card formatted by another digital camera or memory card reader.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
NOTICE
When you format the memory card in your PC that runs on Windows 2000 or XP, please
select the FAT file system.
Formatting on a PC
1. Select [Removable Disk] in the [Windows Explorer].
2. Press the right mouse button and select [Format].
3. Select [FAT] file format type and click the [Start] button.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Date set
You can change the imprinted date.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the [DATE SET] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [DATE
SET] sub menu.
PLAY
SETUP
MyCAM
7. Select the desired sub menu by pressing the UP/DOWN button.
DATE SET
TIME SET
D.TYPE
‘04/04/01
RIGHT button
: selects YEAR/ MONTH/ DAY item.
03:58 PM
YY/MM/DD
OFF
UP/ DOWN button : changes the value of each item.
8. Press the OK button to confirm the setting.
IMPRINT
MOVE:
CHANGE:
Press the menu button twice and the menu display will disappear.
PLAY
SETUP
YEAR
MyCAM
DATE SET
TIME SET
D.TYPE
04 /04/01
IMPRINT
SET:OK
BACK:
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Time set
You can change the imprinted time.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the
main menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the
next menu page will be displayed.
EXIT:MENU
PAGE:
5. Select [TIME SET] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [TIME
SET] sub menu.
PLAY
SETUP
MyCAM
DATE SET
TIME SET
D.TYPE
‘04/04/01
7. Select the desired sub menu by pressing the UP/DOWN button.
RIGHT button : selects HOUR, MINUTE, AM/PM item.
UP/ DOWN button : changes the value of each item.
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will
disappear.
03:58 PM
YY/MM/DD
OFF
IMPRINT
MOVE:
CHANGE:
PLAY
SETUP
HOUR
MyCAM
DATE SET
TIME SET
D.TYPE
03 : 58 PM
IMPRINT
SET:OK
BACK:
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Date type
You can select date type that is imprinted on the image.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select [D.TYPE] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [D.TYPE]
sub menu.
PLAY
SETUP
MyCAM
7. Select the desired sub menu by pressing the UP/DOWN button.
‘YY/ MM/ DD: Year/ Month/ Day
DATE SET
TIME SET
D.TYPE
YY/MM/DD
MM/ DD/ ‘YY: Month/ Day/ Year
MM/DD/ YY
DD/MM/ YY
DD/ MM/ ‘YY: Day/ Month/ Year
IMPRINT
8. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
SET:OK
BACK:
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Imprint
There is an option to include DATE/TIME on still images.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main
menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
3. Select [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
EXIT:MENU
PAGE:
5. Select the [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the RIGHT button and the cursor will shift to the [IMPRINT]
sub menu.
PLAY
SETUP
MyCAM
DATE SET
TIME SET
D.TYPE
7. Select the desired sub menu by pressing the UP/DOWN button.
OFF
DATE
DATE&TIME
- OFF
:
DATE & TIME will not be stamped on the image file.
- DATE
: Only DATE will be stamped on the image file.
IMPRINT
- DATE&TIME : DATE & TIME will be stamped on the image file.
8. Press the OK button to confirm the setting.
SET:OK
BACK:
Press the menu button twice and the menu display will disappear.
INFORMATION
Date & Time are imprinted at the bottom right side of the LCD monitor.
Date will be imprinted as DATE TYPE setting.
TIME is imprinted in the following way : [Hour / Minute/ Second] and hours are shown using
the 12 hour clock.
The imprint function is unaffected by the camera being switched on and off.
Date & Time is imprinted as you set it in the DATE SET, TIME SET menu.
The imprint function is applied only to the still image.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
A beep will sound when you press the camera button and an error takes place. You can check the
camera condition with this function.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the DOWN button on the [IMPRINT] menu and the next
menu page will be displayed.
PLAY
SETUP
MyCAM
7. Select the [SOUND] menu by pressing the UP/DOWN button.
8. Press the RIGHT button and the cursor will shift to the [SOUND]
sub menu.
SOUND
LCD
ON
OFF
VIDEO
Q.VIEW
9. Select the desired sub menu by pressing the UP/DOWN button.
- [ON] : The sound function is activated.
SET:OK
BACK:
- [OFF] : The sound function is not activated.
10. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will
disappear.
INFORMATION
Even though the SOUND function is set to [OFF], you can hear Movie clip, voice memo and
sound clip file.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD brightness
You may adjust the LCD brightness
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the DOWN button on the [IMPRINT] menu and the next
menu page will be displayed.
PLAY
SETUP
MyCAM
7. Select [LCD] menu by pressing the UP/DOWN button.
8. Press the RIGHT button and the cursor will shift to the [LCD] sub menu.
9. Select the desired sub menu by pressing the UP/DOWN button.
There are LOW, NORMAL and HIGH sub menu in the [LCD] menu.
10. Press the OK button to confirm the setting.
SOUND
LCD
DARK
VIDEO
Q.VIEW
NORMAL
BRIGHT
SET:OK
BACK:
Press the menu button twice and the menu display will
disappear.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be
governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
1. Press the menu button and press the RIGHT button to select
PLAY
SETUP
MyCAM
[SETUP](Second) tab.
FILE
SERIES
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [FORMAT] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [FORMAT] menu and the next
menu page will be displayed.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the [IMPRINT] menu by pressing the UP/DOWN button.
6. Press the DOWN button on the [IMPRINT] menu and the next
menu page will be displayed.
PLAY
SETUP
MyCAM
7. Select [VIDEO] menu by pressing the UP/DOWN button.
8. Press the RIGHT button and the cursor will shift to the [VIDEO]
sub menu.
SOUND
LCD
VIDEO
Q.VIEW
NTSC
PAL
9. Select the desired sub menu by pressing the UP/DOWN button.
10. Press the OK button to confirm the setting.
SET:OK
BACK:
Press the menu button twice and the menu display will disappear.
INFORMATION
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy,
Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an external monitor
Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the
camera to an external monitor via the video cable. When the camera is connected to an external
monitor, the LCD monitor will be turned off automatically.
INFORMATION
When using a TV as an external monitor, you will need to select the external or AV channel
of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the external
monitor and the menu functions are the same as those indicated on the LCD monitor.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick view
You can briefly review the last image captured during the pre-set time.
1. Press the menu button and press the RIGHT button to select
[SETUP](Second) tab.
PLAY
SETUP
MyCAM
FILE
SERIES
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Press the DOWN button until the [Q. VIEW] menu is selected.
4. Press the RIGHT button and the cursor will shift to the [Q.VIEW]
sub menu.
PWR OFF
LANGUAGE
FORMAT
OFF
ENGLISH
NO
EXIT:MENU
PAGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
- [OFF]
: The quick view function can’t be activated.
PLAY
SETUP
MyCAM
- [1 ~ 3 SEC] : The captured image is briefly displayed during the
selected time.
SOUND
LCD
1
SEC
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be
disappeared.
VIDEO
Q.VIEW
SET:OK
BACK:
* Setting up the [DEL, ANSWER] function
If you select [1~3SEC] sub menu at the step 5, press the RIGHT
button and the [DEL. ANSWER] menu will be displayed.
Select the desired [DEL. ANSWER] sub menu by pressing the
UP/DOWN button.
PLAY
SETUP
MyCAM
SOUND
LCD
DEL.ANSWER
OFF
ON
VIDEO
Q.VIEW
- Selecting [OFF] : A [DEL. ANSWER] message will not display.
- Selecting [ON] : You can delete the captured image at once.
* Using the [DEL.ANSWER] menu
SET:OK
BACK:
If you select [ON] at the [DEL.ANSWER] menu, a message as
shown alongside will be displayed after taking a picture.
- Selecting [YES] : the captured image is deleted.
- Selecting [NO] : the captured image is stored.
INFORMATION
The quick view function doesn’t apply to the movie clip and sound clip file.
[Q.VIEW] function is not adjusted to the TIFF file type.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
MyCAM menu
You can set up a start up image, start up sound and shutter sound.
Every camera working mode has the MyCAM menu.
Start up image
You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
1. Press the menu button and press the RIGHT button twice to
PLAY
SETUP
MyCAM
select [MyCAM](Third) tab.
S.IMAGE
IMAGE2
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. IMAGE] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
IMAGE] sub menu.
S.SOUND
SH.SOUND
SOUND1
SH.SOUND1
MOVE:
CHANGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
PLAY
SETUP
MyCAM
Press the menu button twice and the menu display will disappear.
S.IMAGE
IMAGE 2
S.SOUND
SH.SOUND
SET:OK
BACK:
NOTICE
Only a image that is save as a LOGO at the [RESIZE] sub menu can be used as the USER IMAGE.
If the USER IMAGE was not saved, no image will be displayed on the LCD monitor at the
time of camera power on. Refer to p.74 for selecting the USER IMAGE.
The USER IMAGE will not be deleted by the [DEL.ALL] or [FORMAT] menu.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Start up sound
You can select the sound that is activated whenever the camera is turned on.
1. Press the menu button and press the RIGHT button twice to
PLAY
SETUP
MyCAM
select [MyCAM](Third) tab.
S.IMAGE
IMAGE2
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
SOUND] sub menu.
S.SOUND
SOUND1
SH.SOUND
SH.SOUND1
MOVE:
CHANGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
PLAY
SETUP
OFF
MyCAM
Press the menu button twice and the menu display will disappear.
S.IMAGE
S.SOUND
SH.SOUND
SOUND1
SOUND2
SOUND3
SET:OK
BACK:
Shutter sound
You can select the shutter sound.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
PLAY
SETUP
MyCAM
S.IMAGE
IMAGE2
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SH. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [SH.
SOUND] sub menu.
S.SOUND
SH.SOUND
SOUND1
SH.SOUND1
MOVE:
CHANGE:
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
PLAY
SETUP
OFF
MyCAM
Press the menu button twice and the menu display will disappear.
S.IMAGE
S.SOUND
SH.SOUND
SH. SOUND1
SH. SOUND2
SH. SOUND3
SET:OK
BACK:
95
Download from Www.Somanuals.com. All Manuals Search And Download.
List of camera function
: Default, : After restarting the camera, : Selectable , X: Not Available, -: Not Selectable
MODE DIAL
Function
SIZE
Print(Photo / Super Fine)
(
)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Memo(Middle / Fine)
E-mail (Small / Normal)
Large
(
)
(
)
(
)
(
)
(
)
(
)
(
)
Photo
Middle
Small
288 x 208pixels
-
-
-
-
-
-
-
(
)
)
-
QUALITY Tiff (1:1)
Super Fine(1:4)
-
-
-
-
Fine (1:8)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
Normal (1:12)
1:12
-
-
-
-
-
-
-
(
-
ZOOM
Optical ZOOM
Digital ZOOM
METERING Multi-Pattern
Spot
(
)
)
)
(
)
)
)
(
)
)
)
(
)
)
)
(
)
)
)
(
)
)
)
(
)
)
)
(
(
)
)
(
)
)
)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FOCUS
AF
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
MF (indicator)
SHOOTING Single
Continuous
AEB
ISO
AUTO
100
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
200
400
W.BALANCE
Auto
(
(
(
)
)
)
Daylight
Cloudy
Fluorescent
Tungsten
EFFECT Normal
B&W
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
sRGB
Sunset
SHARPNESS Soft
Normal
Vivid
96
Download from Www.Somanuals.com. All Manuals Search And Download.
List of camera function
MODE DIAL
Function
FLASH
Auto
(
)
(
)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Red eye (with Auto)
Fill-in
(
)
(
)
-
-
Slow sync.(with Red eye)
Off
(
)
-
(
(
(
)
)
)
(
(
(
)
)
)
(
(
(
)
)
)
(
(
(
(
)
)
)
)
-
EVC
-0.5 ~ -2.0EV (1/2 EV step)
0.0EV
-
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
-
+0.5 ~ +2.0EV (1/2 EV step)
-
SELFTIMER Off
2 sec.
-
-
10 sec.
-
Remote control
Normal (80cm ~ ∞)
Macro (30 ~80cm)
Super Macro (6 ~30cm)
Off
-
AF
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
(
(
)
)
-
ZONE
-
-
AUDIO
-
(Voice memo) On
-
A/S/M
SET
A/S/M
(A)
(P)
-
Av
Tv
(F5.6
)
(F5.6
)
(F5.6)
-
(1/250)
(1/250)
(1/250)
-
SLIDE SHOW OFF /1~10 sec.(1sec step)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(OFF)
Repeat Off
Repeat On
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(
)
PROTECT Unlock
Lock
(
)
DPOF
Index (1 print)
Standard (0 ~30 prints)
Trimming
EDIT
Resize
DELETE ALL
FILE NAME Reset
Series
(
)
POWER OFF OFF /1~10 min.
LANGUAGE 15 Languages
(3 min)
(English)
DATE
2002.01.01 ~2050.12.31
(2003.01.01 )
97
Download from Www.Somanuals.com. All Manuals Search And Download.
List of camera function
MODE DIAL
Function
IMPRINT
Off
(
(
(
(
)
)
)
)
Date
Date &Time
YYYY/MM/DD
DD/MM/YYYY
MM/DD/YYYY
On
DATE TYPE
SOUND EFFECT
START-UP IMAGE
Off
Off
IMAGE 1
IMAGE 2
IMAGE 3
USER IMAGE
Off
START-UP SOUND
SHUTTER SOUND
SOUND 1
SOUND 2
SOUND 3
Off
(
(
)
)
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
0 ~2 Level
NTSC
LCD BRIGHTNESS
VIDEO OUT
(1 Level )
(
)
PAL
QUICK VIEW
Off /1~3 sec
Delete answering On
Delete answering Off
(1 sec)
(
)
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting PC mode
If you insert the USB cable into the USB connection terminal, the camera working mode will change
to the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The autofocus indicator lamp(red) lamp blinks when the files are transferring via the USB connection.
Connecting the camera to PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB
port of the PC
- The plugs must be firmly inserted.
Disconnecting the camera and PC
Refer to the following page
- WIN 98SE
: p.118
- WIN 2000/ME/XP : p.118
INFORMATION
The camera driver must be installed before using PC mode.
To save battery power, it is recommended that you use an AC adaptor(Optional) when
connecting the camera to a computer.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting PC mode
Downloading stored images
Once you have downloaded images to your PC, they can be edited and printed.
1. Connect the camera to your PC with the USB cable.
2. On your computer’s desktop display, select [My computer] and
double click [Removable Disk DCIM 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu
[Cut] : cuts a selected file.
[Copy] : copies files.
5. Click a folder that you want to paste the file.
6. Press the right mouse button and a pop-up menu will open.
Click [Paste].
7. An image file is transferred from camera to your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor
and you can copy or move the image files.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
Your new Samsung camera is a precision instrument. Whilst it is designed to withstand general wear
and tear, there are some important points that will help you get maximum service and reliability from
your camera. The following should be avoided :
- Severe changes in temperature and humidity.
- Dust and dirt.
- Direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or which are highly flammable materials.
- Pesticides, etc.
Sand can be particularly troublesome to cameras.
- Sand or other small particulates can cause severe malfunctions.
Ensure that there is no contact with sand or similar particles.
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation can form
on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until
all moisture is dispersed. Moisture build up can also occur in the MEMORY CARD. If this happens,
turn off the camera and remove the MEMORY CARD. Wait until the moisture has dispersed.
If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to
remove the batteries and the MEMORY CARD, the camera is not used for some time.
If the camera is exposed to electronic interference, it will turn itself off to protect the MEMORY CARD.
Maintenance
- Use a soft brush (available from photo stores) to GENTLY clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
- Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc.
This may damage the body shell of the camera and also affect its performance.
- Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in
its protective carry case at all times when not in use.
DO NOT attempt to disassemble or modify the camera. It contains delicate parts and there are high
voltage circuits that can cause electric shocks.
Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static electricity. In
this case, disconnect and re-connect the USB cable before trying the transfer again.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicator
There are several warnings that may appear in the LCD display
Warning indicator
CARD ERROR !
Causes
Remedy
- Card error
- Turn off the camera power and
turn it on again
- Insert the memory card again
- Format the memory card (p.83)
- There is insufficient memory
capacity to take an image
- Insert a new memory card
- Delete unnecessary image files to
free up some memory
CARD FULL !
NO IMAGE !
- There are no images stored on the
memory card
- Take images
- Insert a memory card that is
holding some images
- A memory card is not inserted
- The camera can’t recognize the
memory card
- Insert a memory card
- Insert the memory card again
- Turn off the camera power and
turn it on again
NO CARD !
- Memory card error
- Insert a new memory card
FILE ERROR !
LOW BATTERY !
CARD LOCKED !
- Contact camera service center
- There is low battery capacity
- The SD memory card is locked
- Insert fresh batteries
- Slide the write protect switch to the
top of the SD memory card
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service center
Symptom
Causes
Remedy
- There is low battery capacity
- An AC Power Adapter is not
connected
- Insert fresh batteries
The camera doesn’t
switch on
- Connect an AC Power Adapter
- The batteries are exhausted
- The Camera is turned off
automatically due to the Auto
power off function
- Insert fresh batteries
- Slide the power switch to
reactivate camera
The camera power is
down whilst in use
- The Adapter plug is not connected
securely
- Remove and re-insert the plug
- The Camera is being used in low
temperatures
- Keep the camera in warm
conditions (i.e. inside a coat or
jacket) and only remove it in order
to take images
Batteries
drain quickly
- Mixing old and new batteries or
battery types
- Insert fresh batteries (all of which
should be of the same type)
- The memory card is not inserted
- After turning the camera off, insert
a new memory card
- There is insufficient memory
capacity
- Delete unnecessary image files
Camera does not
take images when
pressing the
- The memory card has not been
formatted
- Format the memory card (p.83)
- The memory card is exhausted
- The camera power is off
- The batteries are exhausted
- The SD card is locked
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
Shutter button
- Slide the write protect switch to the
top of the SD memory card
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service center
Symptom
Causes
Remedy
- The focus mode is not correct.
- If the subject is closer than 0.8m,
select macro shot mode.
The images are
unclear
- The autofocus was not activated
- Use Fixed focus when you can’t
use auto focus mode.
-
Taking a picture beyond the flash range
-
Take a picture within the flash range
- The lens is smudged or dirty.
- Clean the lens
The flash does
not fire
- FLASH OFF mode have been
selected
- Dis-engage FLASH OFF mode
- The date and time have been set
incorrectly or the camera has
adopted the default settings
- Reset the date and time correctly
Incorrect date and
time is displayed
The camera buttons
do not operate
- Camera malfunction
- Remove /re-insert batteries and
switch camera on
Memory card error
- Incorrect memory card format
- Re-format the memory card (p.83)
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Before contacting a service center
Symptom
Causes
Remedy
Color of image
different to original
scene
- White balance setting is incorrect
- Select appropriate White balance
Images are too bright
- Exposure is excessive
- Reset exposure compensation
- Check the connection cables
- The external monitor has not been
connected properly with the
camera
No image on external
monitor
- There are incorrect files in the
memory card
- Insert a memory card that have
correct files
- Cable connection is incorrect
- The camera is off
- Check the connection
- Turn the camera on
- There are no batteries, the
batteries are exhausted or the AC
adapter is not connected
- The operating system is not
Windows 98, 98SE, 2000, ME,
XP/ Mac OS 9.x~10.2.
- Insert new batteries or check the
adapter connection
When using
the PC’s explorer,
‘Removable Disk’
file does not show
- Install Windows 98, 98SE, 2000,
ME, XP/ Mac OS 9.x~10.2 to PC
that supports USB
Alternatively the PC does not
support USB
- USB driver is not installed
- Install "USB Storage Driver"
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Type
1/1.8" CCD
Image Sensor
Lens
Effective Pixels
Total Pixels
Focal Length
F No.
Approx. 4.0 Mega pixels
Approx. 4.1 Mega pixels
Schneider Lens f = 7.7 ~ 23.1mm (35mm film equivalent : 38~114mm)
F2.7 ~ F4.9
Digital Zoom
Still Image mode : 1.0X ~ 4.0X
Play mode : 1.0X ~ 8.3X (depends on image size)
Real image optical viewfinder
1.5" color TFT LCD (117,600 dots)
TTL auto focus, Manual focus
Normal : 80cm ~ infinity, Macro : 30 ~ 80cm,
Super Macro : 6 ~ 30cm (Wide only)
Mechanical and Electronic shutter
4 ~ 1/2,000 sec. (Manual : max. 15 sec.)
Program AE, Shutter Priority AE, Aperture Priority AE or
Manual Exposure / Metering : Multi, Spot
±2.0EV (0.5EV steps)
Optical Viewfinder
LCD Monitor
Type
Viewfinder
Focusing
Shutter
Range
Type
Speed
Control
Exposure
Compensation
ISO Equivalent
Modes
Range
Recharging Time
Auto, 100, 200, 400
Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
Wide : 0.3 ~ 3.0m, Tele : 0.3 ~ 2.0m
Approx. 7 sec.
Flash
Sharpness
Effect
Soft, Normal, Vivid
Normal, B&W, sRGB, Sunset
White Balance
Auto, Daylight, Cloudy, Fluorescent, Tungsten
Voice Recording (max. 2 hour)
Voice Memo on Still Image (max. 10 sec.)
Date&Time, Date, Off (user selectable)
Modes : Easy, Program, A/S/M, My Set, Night Scene, Portrait
Macro : Macro, Super Macro
Continuous : Single, Continuous, AEB
Self-timer : 10 sec., 2 sec., Remote control (optional)
Voice On, Off (user selectable)
Size : 288x208 (Recording time : memory capacity dependent)
SD / MMC card (up to 256MB guaranteed)
Still Image : TIFF, JPEG (DCF), DPOF
Movie Clip : AVI (MJPEG)
Voice Recording
Date Imprinting
Still Image
Movie Clip
Shooting
Storage
Media
File Format
Voice : WAV
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Image Size
Capacity (32MB)
Storage
Large
Small
Large
: 2272x1704 pixels, Medium : 1120x840 pixels,
: 544x408 pixels, Photo : 2272x1504 pixels
: Super fine 12, Fine 25, Normal 38, TIFF 2
Medium : Super fine 53, Fine 106, Normal 159, TIFF 8
Small
Photo
: Super fine 225, Fine 451, Normal 676, TIFF 35
: Super fine 14, Fine 29, Normal 43, TIFF 2
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions
and camera settings.
Image Play
Interface
Single image, Thumbnails, Slide show, Movie Clip
Digital output connector : USB
Audio : Mono
Video output : NTSC, PAL (user selectable)
DC power input connector : 5.0V
Optional : CR-V3 battery, 2x AA alkaline, Lithium, Ni-Mn, Ni-Zn, Ni-MH,
Ni-Cd batteries. Rechargeable Li ion battery - SLB-1437 or
SBP-1303, AC adapter
Power Source
* Included battery may vary depending on sales region.
105.5 x 54.6x 38 mm
Dimensions (WxHxD)
Weight
165g (without batteries and card)
Camera Driver
Software
Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.x ~ 10.2)
Digimax Viewer, ArcSoft PhotoImpression
Application
System Requirements
Digimax V4000
PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Minimum 32MB RAM (XP : 128MB)
140MB of available hard-disk space
USB port
For Windows
CD-ROM drive
800x600 pixels, 16-bit color display compatible monitor
(24-bit color display recommended)
Power Mac G3 or later
Mac OS 9.x ~ 10.2
Minimum 64MB RAM
110MB of available hard-disk space
USB port
For Macintosh
CD-ROM drive
QuickTime 4.0 or later for Movie Clip
Specifications are subject to change without prior notice.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by inappropriate use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not
covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S (Operating
Systems).
System Requirements
For Windows
For Macintosh
Power Mac G3 or later
PC with processor better than MMX
Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Minimum 32MB RAM (XP : 128MB)
140MB of available hard-disk space
USB port
Mac OS 9.x ~ 10.2
Minimum 64MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
CD-ROM drive
QuickTime 4.0 or later for Movie Clip
800x600 pixels, 16-bit colour display
compatible monitor (24-bit color display
recommended)
108
Download from Www.Somanuals.com. All Manuals Search And Download.
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window
should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB
card reader. After installing the driver and connecting this camera to the PC, you can find
[Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only
for Windows. A USB Driver for MAC is not included with the Application CD. But you can use the
camera with Mac OS 9.x ~ 10.2.
Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy, move or
delete the images and enlarge/downscale the image sizes with Digimax Viewer. This software is
only compatible with Windows.
PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
INFORMATION
Be sure to check the system requirements (page 108) before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
To use this camera with a PC, install the application software first. After this has been done, the stored
images in the camera can be moved to the PC and can be edited by an image editing program.
INFORMATION
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The Digimax V4000 camera driver is installed
automatically.
[Click!]
2. Camera driver installation is complete.
Click the [Finish] button.
[Click!]
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
3. A window for which you can select application software will
be displayed. Select the application program and click the
[Install] button.
Refer to page.109 for more information about the
application program.
[Click!]
INFORMATION
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
4. Install Digimax Viewer.
Click [Next >] button.
[Click!]
INFORMATION
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
5. The Software License Agreement window will be displayed.
If you agree to this, click [Yes], the window will then move
to the next step. If you disagree, click [No] and the
installation program will be canceled.
[Click!]
6. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse (R)..]
and choose a folder you want.
[Click!]
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
7. A window will open, asking you to choose a folder to which
program icons will be added. Click [Next >] button.
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click!]
8. Digimax Viewer Installation is completed.
The PhotoImpression installation window will be displayed
as shown alongside.
Click the [OK] button.
[Click!]
INFORMATION
If you click [Cancel] in Step 8, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
9. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
10. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window will
then move to the next step. If you disagree, click [No] and
the installation program will be canceled.
[Click!]
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
11. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse...] and
choose a folder you want.
[Click!]
12. The [Select Components] window will appear. Click [Next
>] button.
[Click!]
13. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >] button.
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click!]
14. Installation is complete.
Click the [Finish] button.
[Click!]
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
15. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now], and then
click [OK].
[Click!]
16. After restarting the computer, connect the PC to the camera with the USB cable.
17. Turn the camera power on. [Found New Hardware
Wizard] will open and the computer will recognize the
camera.
If you have ever installed an image viewer program or
your OS is Windows XP, an image viewer program will
open.
If the image viewer program opens, the camera driver was
setup successfully.
18. If you can see [Removable Disk] under [My computer], the
camera driver installation was successful.
Now you can transfer image files from the camera to PC
via the USB cable.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the application software
INFORMATION
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and
a window asking you to select a driver file may appear. In this case, specify "Digimax V4000
Driver" in the CD supplied. (for Windows 98 and 98 SE).
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.116), and re-install the driver.
2. Refer to FAQ (p.122) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will
open. Click [Digimax V4000] and click the
[Add/Remove] button.
[Click !]
4. Uninstallation is complete. Click the [Finish] button and
the window will disappear.
[Click !]
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Removable Disk
To use this camera as a Removable Disk, install (p.110) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to the PC.
INFORMATION
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
We recommend that you should copy the images to the PC to view them. Opening images
directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory.
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is
displayed in THUMBNAIL mode.
The auto focus lamp will blink, when a file is transferred
(copy or deletion) between the PC and the camera. Do
not remove the USB cable until the lamp stops blinking.
To remove the USB cable in Windows 2000/ME/XP, use
the [Unplug or Eject Hardware] icon on the task bar.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware] icon on
the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will open.
Select the [USB Mass Storage Device] and click the
[Stop] button.
[Click!]
4. The [Stop a Hardware device] window will open.
Select the [USB Device] and click the [OK] button.
[Click!]
5. A [Safe to Remove Hardware] window will open.
Click the [OK] button.
[Click!]
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk will be
removed safely.
7. Unplug the USB cable.
[Click!]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera
driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up.
This camera is compatible with MAC OS 9.x ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
INFORMATION
If you use Mac OS 10.0 or later, you may experience an error occurring when you transfer
files from the PC to the camera.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Using PhotoImpression
With PhotoImpression, you can edit or store still images that you downloaded from the camera. This
software is only available in Windows version.
To start the program, click [Start
The following screen will appear.
Programs
ArcSoft PhotoImpression 4
PhotoImpression4].
[ Help Button ]
[ Command Button ]
[ Tool Bar ]
You can use PhotoImpression to perform the following tasks.
Command Button
Button
Description
Imports a picture from an album, a source folder, or the camera/scanner, or
captures screen shots of what is being viewed on the current monitor.
Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, Insert Effects, or
Layer.
Performs Insert Frame, Insert Borders, Insert Calendar, Insert Greeting Cards,
Insert Template, or Connect with Other Software.
Saves the edited picture, and sends an e-mail or uses it as the background image.
Outputs the edited picture according to your preferences.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Using PhotoImpression
Tool Bar
Button
Description
Resize Layer
Button
Description
Rotate Layer
Flip Layer Horizontally
Undo
Rotate All Layers
Redo
Copy
Paste
Delete Layer
Close Picture
INFORMATION
For detailed instruction on how to use PhotoImpression, please refer to the program's Help.
Digimax Viewer 2.1
This software is only compatible with Windows.
1. To open Digimax Viewer, click the [Start
Programs
Samsung
Digimax Viewer 2.1
Digimax Viewer 2.1 ] and
Digimax Viewer 2.1 will then open.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Digimax Viewer 2.1
2. If the [Auto Launch] option is selected, this program will be executed automatically with recognizing
the camera.
3. You can easily use the Digimax viewer 2.1 program as it offers
a FILE menu and TOOL bar. And, you can use the pop up
menu. Click an image and press the right mouse button.
Digimax Viewer functions are listed below.
- Basic functions
: Copy, Cut, Paste, Delete, Rotate, Rename, changing file type, Resize,
Property.
- Advanced functions : Print, Slide show, Export, Sending e-mail, On-line print, Web album etc.
INFORMATION
Before deleting images from the camera, you should protect or download images to your
computer that you wish to keep.
Refer to the [Help] menu in Digimax viewer 2.1 for further information.
FAQ
Please check the following if the USB connection malfunctions.
[Case 1]
[Case 2]
[Case 3]
The camera power is off.
Turn the camera power on. We recommend using an AC power adapter in PC mode.
USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to page 110.
The USB cable is not connected or you are using a cable with an incorrect
specification.
Use a USB cable with the correct specification.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device Manager.
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and then
turn on the camera.
[Case 5]
[Case 6]
There is an unexpected error during file transfer
Turn the camera power off and on again. Transfer the file again.
How do I know my computer supports a USB Interface?
Check the USB port in your computer or keyboard.
Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000, ME .XP.
Check [Universal Serial Bus controllers] in Device Manager.
Do the following to check [Universal Serial Bus controllers].
Win 98/ME
Win 2000
Win XP
: Trace [Start Settings Control Panel System Device
Manager Universal Serial Bus controllers]
: Trace [Start Settings Control Panel System Hardware
Device Manager Universal Serial Bus controllers].
:
Trace [Start Control Panel Performance and Maintenance System
Hardware Device Manager Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial Bus
controllers].
In addition, double-click on the USB Universal Host Controller and the USB Root Hub
to check if the Device Status states "This device is working properly". If the Device
Status says the device is "not working properly", click the "Driver" tab and then click
[Update Driver] or [Reinstall Driver].
When all the conditions mentioned above are met, the computer can support the USB interface.
[Case 7]
[Case 8]
When using the USB hub.
There may be a problem in connecting the camera to the PC through the USB hub if
the PC and the hub are not compatible.
Wherever possible, connect the camera to the PC directly.
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time as
another USB cable. In this case, disconnect the other USB cable, and connect only
one USB cable to the camera.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
[Case 9]
When I open the Device Manager (by clicking Start (Settings) Control Panel
(Performance and Maintenance) System (Hardware) Device Manager), there
are Unknown Devices or Other Devices entries with a yellow question mark(?)
beside them or devices with an exclamation mark(!) beside them.
Right-click on the entry with the question(?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again.
For Windows 98 PC, remove the camera driver also, restart the PC, and then reinstall
the camera driver.
Double-click on the entry with the question (?) or exclamation (!) mark, click the "Driver"
tab, and click [Update Driver] or [Reinstall Driver]. If a message appears asking you to
specify the location of the appropriate device driver, specify "Digimax V4000 Driver" in
the CD supplied.
Please check the following if the movie clip doesn't play back.
If you installed an incorrect codec onto your PC, the movie clip may not play back on the PC.
1. Check whether the JPEG Decoder provided with the camera is installed.
If you didn't install the camera driver, please install the JPEGCODE included in the
application S/W CD-ROM. If not, the movie clip may not play back on the PC.
[ Installing the JPEG Decoder ]
1) Insert the CD provided with the camera.
2) Run the windows explorer and select the CD-ROM drive.
3) Select the JPEG_Decoder folder and double click the Setup.exe file.
The codec will be installed.
2. Compatible problems with the codecs installed onto the PC.
If the movie clip doesn't play back after installing the JPEG Decoder, refer to the following.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
1) When the movie clip plays back, only the sound plays back without the image.
It isn't compatible with the Mogen MJPEG Decoder. Uninstall the Mogen MJPEG Decoder
as following order. Click [Start Run] and a window will open.
Type "regsvr32 /u m3jpgdec.ax" and press the Enter key.
2) When the movie clip plays back, the blue and red colors are reversed or the movie clip doesn't
open. It isn't compatible with the ffdshow Codec or K-lite Codec Pack.
Disable the ffdshow program.
Trace [Start
Programs
ffdshow
Disable ffdshow].
Uninstall the K-Lite Codec Pack or set the default
program of the AVI file as the Windows Media
Player.
Trace [Start
Programs
Controller
Add/ Remove
Select the K-Lite Codec Pack
Click the Change/ Remove button].
Run the windows explorer
Click the right mouse button
Select AVI file
Select the "Open
with" menu
Check the "Always use this program to open these
files" option Click the [OK] button.
Click the Windows Media Player
Most problems will be solved with those remedies. If the movie clip doesn't play back continuously,
install the JPEGCODE provided with the camera again.
For more information, visit the samsung website(www.samsungcamera.com) and see the FAQ page.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
126
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
127
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWON-
GU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
FAX : (49) 6196 66 53 66
SAMSUNG FRANCE S.A.S.
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2282/5
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-537-7000
FAX : (33) 1-4320-4510
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY, PR-KT,
37-A, KORP14
FAX : (1) 310-537-1566
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : +44 (0) 1932 455300
POST CODE:300190
FAX : +44 (0) 1932 455325
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-2054
Download from Www.Somanuals.com. All Manuals Search And Download.
|
RCA Conference Phone 25202RE3 User Guide
RCA CRT Television 24V511T User Guide
RCA Telephone Model 28301 User Guide
Regency Indoor Fireplace U32 NG3 User Guide
Rockford Fosgate Stereo Amplifier R300 4 User Guide
Rolls Car Amplifier PA71 User Guide
Sagem Cell Phone MYV 76 User Guide
Samsung Air Conditioner AM26B1C13 User Guide
Samsung Flat Panel Television LC550 ZC User Guide
Schumacher Battery Charger SC 8010A User Guide