Camera User Guide
The serial number of this
product is given on the bottom
face of the camera.
Basic Operations
If you are using the camera for the first time, read this section.
This section provides a basic overview of how to turn on the camera, take
pictures and play back pictures.
Advanced Operations
Read this section when you want to learn more about the different
camera functions.
This section provides more detailed information about the functions used to
take pictures and play back pictures, as well as information on how to
customize the camera settings, print pictures, and use the camera with a
computer.
The rechargeable battery needs to be charged before use. The battery is not
charged at the time of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Warning Symbols
Various symbols are used throughout this instruction manual and on the
product to prevent physical harm to you or other people and damage to
property. The symbols and their meanings are explained below.
This symbol indicates matters that may lead to imminent risk of death or serious
injury if ignored or incorrectly handled.
Danger
This symbol indicates matters that may lead to death or serious injury if ignored
or incorrectly handled.
Warning
This symbol indicates matters that may lead to injury or physical damage if
ignored or incorrectly handled.
Caution
Sample Warnings
The
symbol alerts you to actions that must be performed.
The
The
symbol alerts you to prohibited actions.
symbol may be combined with other symbols to indicate that a specific action is
prohibited.
ꢀ Examples
Do not touch
Do not disassemble
Observe the following precautions to ensure safe use of this equipment.
Danger
ꢀ Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage
circuitry in the equipment poses significant electrical hazard.
ꢀ Do not attempt to disassemble, alter or directly solder the battery.
ꢀ Do not put the battery in a fire, attempt to heat it, use it in a high temperature
environment such as next to a fire or inside a car, or abandon it. Do not put it into water
or the sea or allow it to get wet.
ꢀ Do not attempt to pierce, hit, compress, drop, or subject the battery to any other severe
impact or force.
ꢀ Do not use a battery that is significantly damaged or deformed.
Download from Www.Somanuals.com. All Manuals Search And Download.1
Warning
ꢀ Turn off the power immediately in the event of abnormalities such as smoke or unusual
odors being emitted. Remove the battery as soon as possible, being careful to avoid
electric shocks or burns. If you are drawing power from a household electrical outlet,
be sure to unplug the power cord from the outlet to avoid fire or electrical hazards.
Discontinue use of the equipment immediately if it is malfunctioning. Contact the
nearest service center at your earliest convenience.
ꢀ Turn off the power immediately if any metallic object, water, liquid or other foreign
object gets into the camera. Remove the battery and memory card as soon as possible,
being careful to avoid electric shocks or burns. If you are drawing power from a
household electrical outlet, be sure to unplug the power cord from the outlet to avoid
fire or electrical hazards. Discontinue use of the equipment immediately if it is
malfunctioning. Contact the nearest service center at your earliest convenience.
ꢀ Avoid any contact with the liquid crystal inside the picture display, should the monitor
be damaged. Follow the appropriate emergency measures below.
•
•
•
SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the affected area
thoroughly with water, then wash well with soap.
EYES: If it gets in your eyes, wash your eyes with clean water for at least 15 minutes
and seek medical advice immediately.
INGESTION: If any of the liquid crystal is ingested, rinse the mouth out thoroughly with
water. Have the person drink a large amount of water and induce vomiting. Seek
medical assistance immediately.
ꢀ Follow these precautions to prevent the battery from leaking, overheating, igniting or
exploding.
•
•
Do not use a battery other than those specifically recommended for the equipment.
Do not carry or store together with metal objects such as ballpoint pens, necklaces,
coins, hairpins, etc.
•
•
Do not put the battery into a microwave or high pressure container.
If leakage of battery fluid or a strange odor, color change, etc. is noticed during use or
during charging, remove the battery from the camera or battery charger immediately
and keep it away from fire.
ꢀ Please observe the following in order to prevent fire, electrical shock or cracking of the
battery while charging.
•
•
•
•
Use only the indicated power supply voltage. Also avoid the use of multi-socket
adapters and extension cords.
Do not damage, bundle or alter power cords. Also, do not place heavy objects on,
stretch or bend power cords.
Do not connect or disconnect the power plug with wet hands. Always grip the plug
section when disconnecting a power cord.
Do not cover equipment while charging.
ꢀ Keep the battery and SD memory card used in this equipment out of the reach of
children to prevent accidental ingestion. Consumption is harmful to human beings. If
swallowed, seek medical assistance immediately.
ꢀ Keep the equipment out of the reach of children.
2Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Do not touch the internal components of the equipment if they become exposed as a
result of being dropped or damaged. The high-voltage circuitry in the equipment could
lead to an electric shock. Remove the battery as soon as possible, being careful to
avoid electric shocks or burns. Take the equipment to your nearest dealer or service
center if it is damaged.
ꢀ Do not use the equipment in wet areas as this could result in fire or electric shock.
ꢀ Do not use the equipment near flammable gases, gasoline, benzene, thinner or similar
substances to avoid the risk of explosion, fire or burns.
ꢀ Do not use the equipment in locations where usage is restricted or prohibited as this
may lead to disasters or accidents.
ꢀ Wipe off any dust that accumulates on the electrical plug as this may lead to fire.
ꢀ Use only the specified AC adapter in household electrical outlets. Other adapters pose
the risk of fire, electric shock or injury.
ꢀ To avoid the risk of fire, electric shock or injury, do not use the battery charger or AC
adapter with commercially available electronic transformers when traveling abroad.
Observe the following precautions to ensure safe use of this unit.
Caution
ꢀ Contact with fluid leaking from a battery can lead to burns. If part of your body comes
in contact with a damaged battery, rinse the area with water immediately. (Do not use
soap.)
If a battery starts to leak, remove it immediately from the equipment and wipe the
battery chamber thoroughly before replacing it with a new battery.
ꢀ Plug the power cords securely into the electrical outlets. Loose cords pose a fire
hazard.
ꢀ Do not allow the camera to get wet. In addition, do not operate it with wet hands. Both
pose the risk of electric shock.
ꢀ Do not fire the flash at drivers of vehicles, as this may cause the driver to lose control
and result in a traffic accident.
Safety Precautions for When using optional products, carefully read the instructions provided with the
Accessories
product before using that product.
Download from Www.Somanuals.com. All Manuals Search And Download.3
Using the Manuals
The following two manuals are included with your CX2.
“Camera User Guide” (This booklet)
Camera User Guide
This guide explains the usage and functions of the camera. It
The serial number of this
product is given on the bottom
face of the camera.
also explains how to install the provided software on your
Basic Operations
If you are using the camera for the first time, read this section.
This section provides
a
basic overview of how to turn on the camera, take
pictures and play back pictures.
computer.
Advanced Operations
Read this section when you want to learn more about the different
camera functions.
This section provides more detailed information about the functions used to
take pictures and play back pictures, as well as information on how to
customize the camera settings, print pictures, and use the camera with
computer.
a
The rechargeable battery needs to be charged before use. The battery is not
charged at the time of purchase.
“Software User Guide” (PDF file)
The “Software User Guide” is available in the following folders
on the provided CD-ROM.
This guide explains how to download images from the camera
to your computer.
Each languagehas its own
“Software User Guide” in
the respective folder.
To copy the User Guide onto your hard disk, copy the PDF
file from the respective folder directly to your hard disk.
“Irodio Photo & Video Studio” image viewing and editing software (for
Windows only) is also included with the camera. For how to use Irodio Photo
& Video Studio, see the displayed “Help”.
For more information on Irodio Photo & Video Studio, contact the Customer
Support Center below.
North America (U.S.)
Europe
TEL: (Toll Free) +1-800-458-4029
UK, Germany, France and Spain: TEL: (Toll Free) +800-1532-4865
Other Countries:
Asia
China
TEL: +44-1489-564-764
TEL: +63-2-438-0090
TEL: +86-21-5385-3786
Business hours: 9:00 AM to 5:00 PM
4Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Precautions ........................................................................ 1
Using the Manuals......................................................................... 4
Contents........................................................................................ 5
Basic Operations
If you are using the camera for the first time, read this section.
11
Packing List................................................................................. 12
Optional Accessories ..............................................................................14
Names of Parts............................................................................ 15
How to Use the Mode Dial........................................................... 17
Picture Display ............................................................................ 18
Getting Ready ............................................................................. 22
About the Battery ....................................................................................22
About the SD Memory Card (available in stores)....................................23
Charging the Rechargeable Battery........................................................25
Loading the Rechargeable Battery and SD Memory Card......................26
Turning the Power On/Off.......................................................................28
Setting the Language..............................................................................30
Setting the Date and Time ......................................................................31
Basic Shooting ............................................................................ 32
Holding the Camera ................................................................................32
Shooting with Auto Shooting Mode.........................................................34
Shooting with Easy Shooting Mode ........................................................37
Using the Zoom Function........................................................................39
Shooting Close-Ups (Macro Shooting)....................................................41
Using the Flash.......................................................................................43
Using the Self-Timer ...............................................................................45
Playing Back Images................................................................... 46
Viewing Your Images ..............................................................................46
Thumbnail View ......................................................................................48
Enlarging Images....................................................................................50
Deleting Files............................................................................... 52
Deleting a File.........................................................................................52
Specifying Multiple Files Separately .......................................................53
Specifying a Range of Multiple Files.......................................................54
Deleting All Files .....................................................................................55
Changing the Display with the DISP. Button............................... 56
About the Electronic Level ......................................................................58
About the Histogram Display ..................................................................60
Download from Www.Somanuals.com. All Manuals Search And Download.5
Advanced Operations
61
Read this section when you want to learn more about the different camera
functions.
1
ADJ. Button Functions
62
Assigning Functions from the Shooting Menu ........................................62
Shifting the AE and AF Targets ..............................................................64
2
Using the Fn (Function) Button
66
Shifting the AF Target for Macro Shooting..............................................67
Locking the Exposure .............................................................................68
AF/Cont. AF ............................................................................................69
AF/M-trgt AF ...........................................................................................70
AF/MF .....................................................................................................71
AF/Snap..................................................................................................72
Switching Between On and Off for Various Functions ............................73
3
Shooting Mode Types
74
Scene Mode (SCENE) ................................................................ 74
Using Portrait Mode ................................................................................77
Shooting in Zoom Macro Mode...............................................................78
Shooting in Miniaturization Mode............................................................79
Using Skew Correction Mode .................................................................81
Changing the Text Density......................................................................82
My Settings Mode (MY1/MY2) .................................................... 83
Dynamic Range Double Shot Mode (Q ).................................... 84
Dynamic Range Expansion Effect ..........................................................85
Dynamic Range Expansion Plus Normal Shooting.................................86
Continuous Mode (R )................................................................ 87
Normal Continuous Mode .......................................................................87
M-Cont Plus (9M)....................................................................................88
M-Cont Plus (2M)....................................................................................90
Speed Cont.............................................................................................92
Movie Mode (3) ......................................................................... 94
Shooting Movies .....................................................................................94
Setting the Frame Rate...........................................................................95
4
Shooting Menu
97
About the Shooting Menu............................................................ 97
Using the Menu.....................................................................................100
Picture Quality Mode/Image Size.............................................. 101
6Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing Modes ........................................................................ 103
Multi-Target AF .....................................................................................104
Manual Focus (MF)...............................................................................105
Pre-AF....................................................................................... 107
Exposure Metering Modes ........................................................ 108
Picture Quality and Color .......................................................... 109
Custom Settings....................................................................................110
Flash Exposure Compensation ................................................. 111
Bracket Shooting....................................................................... 112
Auto Bracketing.....................................................................................112
White Balance Bracketing.....................................................................113
Color Bracketing ...................................................................................114
Focus Bracketing ..................................................................................115
Long Time Exposure ................................................................. 117
Shooting Several Pictures with the Custom Self-Timer............. 118
Shooting Pictures Automatically at Set Intervals....................... 119
Camera Shake Correction......................................................... 121
Limiting the Shutter Speed........................................................ 122
Imprinting the Date on Images .................................................. 123
Exposure Compensation........................................................... 124
White Balance ........................................................................... 126
Manual Settings ....................................................................................127
ISO Sensitivity........................................................................... 128
Restoring the Shooting Menu Settings to their Defaults............ 130
5
Playback Functions
131
Playing Back Movies ................................................................. 131
Playing Back MP Files............................................................... 132
Exporting MP Files................................................................................134
6
Playback Menu
138
About the Playback Menu ......................................................... 138
Using the Menu.....................................................................................139
Saving Images You Want to Quickly Display
(Flag Function Setting) .......................................................... 140
Setting/Canceling One File at a Time ...................................................140
Setting/Canceling Multiple Files at One Time .......................................141
Displaying an Image Set to Flag Function Setting
(Flag Function Display).......................................................... 142
Resizing Images........................................................................ 143
Trimming Images....................................................................... 144
Download from Www.Somanuals.com. All Manuals Search And Download.7
Correcting the Image Brightness and Contrast ......................... 147
Correcting Images Automatically ..........................................................147
Correcting Images Manually .................................................................148
Correcting the White Balance.................................................... 150
Correcting Skewed Images ....................................................... 152
Preventing the Deletion of Files ................................................ 154
Displaying Slide Shows............................................................. 157
Copying the Contents of the Internal Memory to an SD Memory
Card....................................................................................... 158
Using a Printing Service (DPOF)............................................... 159
Setting/Canceling DPOF for a File........................................................159
Setting/Canceling DPOF for All Files ....................................................160
Setting DPOF for Multiple Files.............................................................160
Restoring Deleted Files............................................................. 162
Viewing on a Television............................................................. 163
7
Setup Menu
165
About the Setup Menu............................................................... 165
Using the Menu.....................................................................................166
Formatting the SD Memory Card............................................... 168
Formatting the Internal Memory ................................................ 169
Adjusting the Picture Display Brightness................................... 170
Registering My Settings ............................................................ 171
Fixing the Focal Length of the Zoom......................................... 173
Fn (Function) Button Settings.................................................... 174
ADJ. Button Settings ................................................................. 176
ISO Auto-High Settings ............................................................. 178
AF Auxiliary Light ...................................................................... 179
Operation Sound Settings ......................................................... 180
Adjusting/Muting the Operation Sound Volume ........................ 181
LCD Image Confirmation Time.................................................. 182
Auto Power Off.......................................................................... 183
LCD Auto Dimmer Mode ........................................................... 184
Auto Resize Zoom..................................................................... 185
Level Confirmation .................................................................... 187
Grid Guide Display Options....................................................... 188
Shooting Information Display Frame......................................... 189
Minimum Shooting Distance Display......................................... 190
Automatic Rotation of Playback Images.................................... 191
File Name Settings.................................................................... 193
Date and Time Settings............................................................. 194
8Download from Www.Somanuals.com. All Manuals Search And Download.
Language Settings .................................................................... 195
TV Playback Method ................................................................. 196
8
Direct Printing
197
About the Direct Print Function ................................................. 197
Connecting the Camera to a Printer.......................................... 198
Printing Still Images................................................................... 199
Printing One or All Still Images .............................................................199
Printing Several Still Images .................................................................202
9
Downloading Images to Your Computer
204
For Windows ............................................................................. 204
System Requirements for Using the Supplied CD-ROM.......................205
CD-ROM Setup.....................................................................................206
When [Installing the software] Is Clicked ..............................................206
When [Browse User’s Manual (Software Version)] Is Clicked ..............210
When [Browse CD-ROM Content] Is Clicked........................................210
Uninstalling the Software ......................................................................211
Downloading Images Using DL-10 .......................................................212
Downloading Images Without Using DL-10 ..........................................213
Disconnecting the Camera from Your Computer ..................................216
For Macintosh............................................................................ 217
Downloading Images to Your Computer ...............................................217
Disconnecting the Camera from Your Computer ..................................218
Using the MP File Viewer......................................................................219
10 Appendices
221
Troubleshooting......................................................................... 221
Error Messages.....................................................................................221
Camera Troubleshooting ......................................................................222
Software and Computer Troubleshooting .............................................228
Specifications ............................................................................ 230
Number of Images That Can Be Stored................................................232
Defaults Settings/Functions Whose Defaults Are Restored When
the Camera Is Turned Off...................................................... 234
Using Your Camera Abroad ...................................................... 236
Cautions on Use........................................................................ 237
Care and Storage...................................................................... 239
Warranty and Servicing............................................................. 240
Index......................................................................................... 242
Download from Www.Somanuals.com. All Manuals Search And Download.9
10Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
Operations
If you are using the
camera for the first time,
read this section.
Packing List......................................12
Names of Parts.................................15
How to Use the Mode Dial...............17
Picture Display.................................18
Getting Ready ..................................22
Basic Shooting.................................32
Playing Back Images.......................46
Deleting Files ...................................52
Changing the Display with the DISP.
Button ...........................................56
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing List
Open the package and make sure all the items are included.
* The actual appearance of items included may differ.
CX2
USB Cable (Mini B cable)
Used to connect the camera to a
computer or Direct Print-
compatible printer.
The serial number of the camera is
provided on the bottom face of the
camera.
AV Cable
Used to view your images on a TV
Rechargeable Battery
Battery Charger
Handstrap
Warranty
12Download from Www.Somanuals.com. All Manuals Search And Download.
Camera User Guide
CD-ROM (G P.204)
Contains software and “Software
User Guide”. VM-1 software and
“Software User Guide” available for
Macintosh; see P.219 for
Camera User Guide
The serial number of this
product is given on the bottom
face of the camera.
installation instructions. Acrobat
Reader is required to view the
“Software User Guide” in Mac OS 9.
Basic Operations
If you are using the camera for the first time, read this section.
This section provides
a
basic overview of how to turn on the camera, take
pictures and play back pictures.
Advanced Operations
Read this section when you want to learn more about the different
camera functions.
This section provides more detailed information about the functions used to
take pictures and play back pictures, as well as information on how to
customize the camera settings, print pictures, and use the camera with
computer.
a
The rechargeable battery needs to be charged before use. The battery is not
charged at the time of purchase.
(This booklet)
Caution-----------------------------------------------------------------------------------------------
The CD-ROM supports the following languages. Operations are not guaranteed on
operating systems with languages other than those listed below.
Japanese, English, French, German, Spanish, Italian, Chinese (Traditional,
Simplified), Korean
Note ---------------------------------------------------------------------------------------------------
Attaching the handstrap to the camera
Thread the small end of the strap through the strap eyelet on the camera and loop the
ends as shown.
Download from Www.Somanuals.com. All Manuals Search And Download.13
Optional Accessories
Soft Case (SC-90)
Used to store your camera.
Rechargeable Battery (DB-70)
Rechargeable battery for use with
this camera.
Battery Charger (BJ-7)
Used to charge the rechargeable
battery (DB-70).
Neck Strap (ST-2)
A double-loop neck strap with
embroidered RICOH logo.
Cable Switch (CA-1)
A switch that connects to the
camera’s USB terminal to operate
the shutter.
Note ---------------------------------------------------------------------------------------------------
Attaching the neck strap to the camera
Remove the end of the neck strap from the connector and attach it as shown in the figure.
• For the latest information on optional accessories, see the Ricoh website
(http://www.ricohpmmc.com/).
14Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Parts
Camera
Front View
4 3
1 2
5
6
7
8
9
Item Name
Refer to
1
Mode Dial
P.17, 34, 37, 74, 83, 84,
87, 94
2
3
4
5
6
Shutter Release Button
POWER Button
Microphone
P.32
P.28
P.94
Lens Cover
-
Zoom Lever z(Telephoto)/Z(Wide-angle)
P.39, 48, 50
8(Enlarged View)/9(Thumbnail View)
7
8
9
Flash
P.43
AF Auxiliary Light/Self-Timer Lamp
Lens
P.45, 179
-
Download from Www.Somanuals.com. All Manuals Search And Download.15
Rear View
7
8
2
2
1
9
10
11
12
13
3
4
5
6
14
15
16 17
Item Name
Refer to
1
2
3
4
5
6
7
8
9
Picture Display
Strap Eyelet
P.18
P.13
Terminal Cover
Speaker
P.163, 198, 212, 213, 217
P.131
USB Terminal
AV Output Terminal
N(Macro)
P.198, 212, 213, 217
P.163
P.41
(*)
ADJ./OK Button
P.62
F(Flash)
P.43
10 6(Playback) Button
11 MENU Button
P.46
P.76, 100, 139, 166
12 Fn (Function) Button
P.66
13 t(Self-timer)/ (Delete) Button
14 DISP. Button
P.52, 45
P.56, 58
-
D
15 Power (DC input) Cable Cover
16 Battery/Card Cover
17 Tripod Screw Hole
P.26
P.231
(*)
Instructions in this manual to “Press the ADJ./OK button !"#$” (or
toward Nor F) indicate that you should press the ADJ./OK button in the
up, down, left or right direction. Instructions to “Press the ADJ./OK
button” indicate that you should press directly down on the button.
16Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use the Mode Dial
Set the mode dial to the desired mode before shooting still images
or movies.
1
Turn the mode dial to the symbol of the function
you want to use.
Mode Dial Symbols and Descriptions
Symbol
Function
Description
Refer to
Automatically sets the optimal aperture P.34
value and shutter speed depending on
the subject.
Auto Shooting Mode
5
You can shoot using the settings
registered in [Reg. My Settings].
P.83
MY1, MY2 My Settings Mode
Allows you to shoot movies.
P.94
P.74
Movie Mode
3
Allows you to shoot with settings
optimized for the shooting scene.
SCENE
Scene Mode
This allows you to shoot with easy
operations and without having to make
any complicated settings. The settings
of some shooting functions cannot be
changed when using this mode.
P.37
EASY
Easy Shooting Mode
Continuous Mode
You can shoot with various continuous P.87
shooting functions.
R
Q
Allows you to shoot images that look
natural even in the dark areas and
bright areas of scenes with high
contrast.
P.84
Dynamic Range
Double-shot Mode
Download from Www.Somanuals.com. All Manuals Search And Download.17
Picture Display
Example of Picture Display when Shooting Pictures
Still Image Mode
1
2
3 4 5
6 7 8 9 10
N 2048
+0.3
Interval
4
21
23
24
11
12
13
14
15
20
26
1cm-
X4.8
1 second
25
31
16
17
18
19
F3.5 1/1000 EV +0.7 ISO 100
27
28
29
30
32
33
27
28
30
18Download from Www.Somanuals.com. All Manuals Search And Download.
00:00
●REC
/00::0022
34
35
36
Movie Mode
640
37
Shutter butoon : Start
Item Name
Flash Mode
Refer to
Item Name
Refer to
1
2
P.43
18 Camera Shake Correction P.121
Flash Exposure
Compensation
P.111
19 Battery Symbol
20 Time Exposure
21 Self-timer
P.21
P.117
P.45
3
4
Muti-Target AF
Focus mark
P.104
22 Macro Shooting
P.41
Scene Modes/
Continuous Mode/
Plus Normal Shooting
P.74
P.87
P.86
23 Minimum Shooting
Distance
P.190
24 Digital Zoom
Magnification/AutoResize
Zoom
P.40, 185
5
6
Shooting Mode Types
P.17
Remaining Number of Still P.232
Images
25 Zoom Bar
P.39
7
8
9
Recording Destination
AE Lock
P.23
26 Interval Shooting
27 Aperture
P.119
P.230
P.122
P.68
Picture Quality
P.101
P.101
P.103
P.126
P.108
P.109
28 Shutter Speed
10 Image Size
29 Exposure Compensation P.124
11 Focus Mode
30 ISO Setting
P.128
P.59
P.33
12 White Balance
13 Exposure Metering
14 Image Settings
15 Bracket Shooting
31 Level Indicator
32 Camera Shake Warning
Symbol
P.112,
113, 115,
114
33 Overexposure Mark
34 Recording Time
P.124
P.232
35 Remaining Recording Time P.232
36 Frame Rate P.95
37 Movie Recording Indicator P.94
16 Histogram
P.60
17 Date Imprint
P.123
Download from Www.Somanuals.com. All Manuals Search And Download.19
Note ---------------------------------------------------------------------------------------------------
• The number of remaining shots available may differ from the actual number of shots,
depending on the subject.
• Movie recording time and the maximum number of still pictures may vary depending
on the capacity of the recording destination (internal memory or SD memory card),
shooting conditions, and the type and manufacturer of the SD memory card.
• When the number of remaining shots is 10,000 or more, “9999” is displayed.
Example of Picture Display During Playback
Still Image Mode
Movie Mode
1
2
3
4
5 6 7
8
9
10
100-0010 10/20
640
15
16
05:12
Start
2009/04//10 24:00
11
12 13
14
Item Name
Refer to
Item Name
Refer to
P.101
P.194
P.230
P.122
P.21
1
2
3
4
5
6
7
8
9
File No.
-
10 Image Size
Number of Playback Files
Total Number of Files
Mode Types
-
11 Date at Shooting
12 Aperture
-
-
13 Shutter Speed
14 Battery Symbol
Flag Function Setting
Protect
P.140
P.154
P.159
P.47
P.101
15 Recording Time or
Lapsed Time
-
DPOF
Playback Data Source
Picture Quality
16 Indicator
-
20Download from Www.Somanuals.com. All Manuals Search And Download.
Note ---------------------------------------------------------------------------------------------------
• The picture display may display messages to inform you of operational instructions
or the camera’s status while in use.
• Additional information can be viewed by pressing the DISP. button (G P.57).
1
2
3
5
6
100-0273 10/20
N 2048
AUTO: Meedium
F 5.0 1/60 ISO 100
EV +0.7
8 10
4
7
AUTO: Medium
F 5.0 1/60 ISO 100
EV +0.7
G:5,A:2
9
11
13
G:5,A:2
28 mm
BLUE
C:+0,S:+0,D:+0
28 mm
12
14
BLUE
C:+0,S:+0,D:+0
15
2009/01//01 02:20
Item Name
Refer to
Item Name
Refer to
1
2
3
Shooting Mode
-
9
White Balance / White
Balance Compensation
P.126
P.150
Plus Normal Shooting
P.86
P.85
Dynamic Range
Expansion
10 Flash Mode
P.43
4
5
6
7
8
Aperture
P.230
P.122
P.128
11 Focal Length of the Zoom P.39
Shutter Speed
ISO Setting
12 Macro Shooting
13 Focus Mode
14 Auto Bracket
15 Image Settings
P.41
P.103
P.112
P.109
Exposure Compensation P.124
Exposure Metering P.108
Battery Level Indication
A battery symbol appears at the lower right of the picture display to
indicate the battery level. Recharge the battery before it is depleted.
Battery Symbol
Green
Description
Battery is sufficiently charged.
Battery partially discharged. Recharging is recommended.
Battery level is low. Recharge the battery.
Caution-----------------------------------------------------------------------------------------------
may be displayed when the camera is powered by an AC adapter. This is normal
and does not indicate a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.21
Getting Ready
Turn the power on and get ready to shoot.
Note ---------------------------------------------------------------------------------------------------
• Be sure the camera is off before removing the battery.
• For information on how to turn the camera off, see P.28.
About the Battery
This camera uses the Rechargeable Battery DB-
70, a dedicated lithium-ion battery supplied with
the camera. It is economical because you can
recharge it using the battery charger and use it
over and over again. The rechargeable battery
needs to be charged before use. The battery is not charged at the
time of purchase.
Number of shots you can take ---------------------------------------------------------------
Approximate number of shots you can take on a single charge: Approx. 290
* When [LCD Auto Dim] (G P.184) is set to [On]
• Based on CIPA standard (Temperature: 23 degrees Celsius, picture display on, 30
seconds between shots, changing the zoom setting from telephoto to wide-angle or
wide-angle to telephoto for each shot, 50% flash usage, turning the power off after
each 10 shots).
• You can take approximately 270 shots when [LCD Auto Dim] is set to [Off].
• Set the camera to synchro-monitor mode to increase the number of shots you can
take. (G P.56)
• The number of shots is for reference only. If the camera is used for long periods of
time for setting and playback, the shooting time (the number of shots) will decrease.
If you intend to use the camera for a long period of time, we recommend carrying a
spare battery.
Caution-----------------------------------------------------------------------------------------------
• The battery may become very hot immediately after operation. Turn the camera off
and leave it to cool down sufficiently before removing the battery.
• Please remove the battery if you are not going to use the camera for a long period of
time.
• When using a lithium-ion battery, use only the specified rechargeable lithium-ion
battery (DB-70). Do not use other rechargeable lithium-ion batteries.
22Download from Www.Somanuals.com. All Manuals Search And Download.
About the SD Memory Card
(available in stores)
You can store images you have taken either in the camera’s
internal memory or on an SD memory card (available in stores).
The internal memory capacity is approximately 88 MB.
To record a lot of still images or movies at high resolutions, use a
high-capacity SD memory card.
About Formatting---------------------------------------------------------------------------------
Before using a new SD memory card, be sure to format it with this camera. If an error
message such as [Card Error] is displayed when an SD memory card is loaded in the
camera or the card has been used with a computer or other digital camera, you must
format the card with this camera prior to use. (G P.168)
Where images are recorded-------------------------------------------------------------------
When no SD memory card is loaded, the camera records images to the internal
memory; when an SD memory card is loaded, it records images to the SD memory
card.
When no SD memory card is loaded
When an SD memory card is loaded
Records to the internal memory
Records to the SD memory card
Caution-----------------------------------------------------------------------------------------------
• If an SD memory card is loaded, the camera does not record to the internal memory,
even if the card is full.
• Take care not to get the contacts of the card dirty.
Download from Www.Somanuals.com. All Manuals Search And Download.23
Write-protecting your images ----------------------------------------------------------------
Move the write-protection switch on the SD memory card to
LOCK to prevent your still images from being accidentally erased
or the card from being formatted. If you unlock the card (by
returning the switch to its original position), it is once again
possible to erase images and format the card.
It is recommended to move the write-protection switch to LOCK
when you have some important data recorded.
Note that you cannot shoot images on a locked card because no
data can be recorded to the card. Unlock the card before shooting.
Note ---------------------------------------------------------------------------------------------------
• For information on switching between the SD memory card and internal memory
during playback, see P.47.
• Movie recording time and the maximum number of still pictures varies depending on
the capacity of the SD memory card. (G P.232)
• You can copy images recorded in the internal memory to the SD memory card.
(G P.158)
24Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Rechargeable Battery
The rechargeable battery needs to be charged before use. The
battery is not charged at the time of purchase.
1
Insert the battery into the battery charger, making
sure that the and markings on the battery
match those on the battery charger.
The battery label should face up.
Caution-----------------------------------------------------------------------------------------------
Be careful not to reverse the and sides.
•
2
Plug the power cable into an outlet.
•
•
Use the battery charger (BJ-7) to recharge the battery.
Charging starts, and the charger lamp indicates the progress, as
shown below. Once charging has finished, unplug the power
cable from the power outlet.
Charger Lamp
Description
Lit
Charging started
Off
Charging complete
Flashing
The battery charger terminal may be soiled or the battery
charger/battery may be faulty. (After unplugging the power cable
from the power outlet and wiping the battery charger terminal
with a dry cloth or cotton swab, plug it in again. If the charger
lamp continues to flash, it is possible that the battery charger or
battery is faulty. Unplug the power cable from the power outlet,
and remove the battery.)
•
The estimated battery charging time is shown below. Depending
on the battery level, the charging time differs.
Rechargeable battery charging time
DB-70
Approx. 100 min. (25°C)
Download from Www.Somanuals.com. All Manuals Search And Download.25
Loading the Rechargeable Battery and SD
Memory Card
After recharging the rechargeable battery, load the rechargeable
battery and the SD memory card. Be sure the camera is off before
removing the battery or SD memory card.
1
Open the battery/card
cover.
2
Make sure the SD memory
card is facing the right way
and then push the card all
the way in until it clicks.
•
The rechargeable battery may be
inserted first.
26Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Insert the rechargeable
battery.
Logo side
•
When the rechargeable battery is
loaded in place, it is locked with
the hook shown in the figure.
Close the battery/card
cover and slide it back into
place.
Removing the Rechargeable Battery
Open the battery/card cover. Release the hook that locks the
rechargeable battery. The battery is ejected. Pull the battery out of
the camera. Be careful not to drop the battery when removing it from
the camera.
Removing the SD Memory Card
Open the battery/card cover. Push in the SD memory card and
gently release to eject it. Pull the card out of the camera.
Caution-----------------------------------------------------------------------------------------------
Remove the battery if you are not going to use the camera for a long period of time.
Store the removed battery in a dry cool place.
Download from Www.Somanuals.com. All Manuals Search And Download.27
Turning the Power On/Off
ꢀTo turn the power on:
1
Press the POWER button.
•
After the start sound, the picture
display turns on.
Using the Camera in Playback
Mode
•
Pressing and holding the 6
(Playback) button turns on the
camera in playback mode, allowing
you to start playback at once.
•
When the camera has been turned
on with the 6button, pressing the
6button again switches playback mode to shooting mode.
Caution-----------------------------------------------------------------------------------------------
After the camera is turned on, it may take longer for the camera to become ready for
shooting when using the flash than when not using the flash.
ꢀTo turn the power off:
1
Press the POWER button.
•
The number of files recorded on
that day is displayed, and then the
camera turns off.
•
•
If the date is not set, the number of
files recorded is displayed as [0].
If the date is changed, only the
number of files recorded after the
date change is displayed.
28Download from Www.Somanuals.com. All Manuals Search And Download.
About Auto Power Off---------------------------------------------------------------------------
• If the camera goes unused for a set period of time, it automatically turns itself off to
save power. (Auto Power Off)
• The auto power off setting can be changed. (G P.183)
About LCD Auto Dimmer Mode--------------------------------------------------------------
When [LCD Auto Dim] is set to [On] on the setup menu (G P.184), the picture display
dims to conserve battery power if the camera is not moved for approximately five
seconds. Move the camera or press any button to return to the original picture display
brightness.
Download from Www.Somanuals.com. All Manuals Search And Download.29
Setting the Language
When the power is turned on for the first time, the language
setting screen appears (for the picture display language). After
setting the language, go on to the date/time setting (for printing
the date and time on your photos).
You can shoot without these settings. However, be sure to set the
language, and the date/time later. Use the setup menu for these
settings.
1
Turn the power on for the first time after purchase.
•
•
•
The language selection screen appears.
To skip language setting, press the DISP. button.
When the DISP. button is pressed, the language setting is
canceled and the date/time setting screen appears.
2
3
Press ADJ./OK button
!"#$to select a language.
Press the ADJ./OK button.
•
The display language is set, and
the date/time setting screen
appears.
Note ---------------------------------------------------------------------------------------------------
For how to set the display language and date/time on the setup menu, see “Language
Settings” (G P.195) and “Date and Time Settings” (G P.194) in this guide.
30Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Date and Time
When the power is turned on for the first time, the date/time
setting screen appears.
1
Press the ADJ./OK button
!"#$to set the year,
month, date, time and
format.
•
Change the setting with !"and
Cancel
move the item with #$.
Setting at shipping
•
You can cancel the setting by
pressing the DISP. button.
Cancel
2
3
Check the display and then press the ADJ./OK
button.
•
The confirmation screen appears.
Press the ADJ./OK button.
•
The date and time are set.
Note ---------------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power
for more than two hours.
• The set date and time can be changed later. (G P.194)
• The date and time can be inserted into images. (G P.123)
Download from Www.Somanuals.com. All Manuals Search And Download.31
Basic Shooting
Now you are ready.
Holding the Camera
Hold the camera as shown below for best results.
1
Hold the camera with both hands
and lightly press both elbows
against your body.
2
Put your finger on the shutter
release button.
Caution-----------------------------------------------------------------------------------------------
• When you are shooting, be careful not to obstruct the lens or flash with your fingers,
hair, or the strap.
• Do not hold the lens unit. Zoom and focusing will not be performed properly.
32Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing Camera Shake---------------------------------------------------------------------
If you move the camera when pressing the shutter release button, the still image might
not come out clearly due to camera shake.
Camera shake tends to occur in the following cases:
• When shooting in a dark place without using the flash
• When using the zoom function
• When shooting using time exposure (G P.117)
When the J symbol appears on the picture display, this indicates that camera
shake may occur. To prevent camera shake, try any of the following.
• Using the camera shake correction function (G P.121)
• Setting the flash to [Auto] or [Flash On] (G P.43)
• Raising the ISO setting (G P.128)
• Using the self-timer (G P.45)
Download from Www.Somanuals.com. All Manuals Search And Download.33
Shooting with Auto Shooting Mode
Turn the mode dial to 5to shoot with auto shooting mode.
The shutter release button works in two steps. When you press
the shutter release button halfway (Half-press), the auto-focus
function is triggered to determine the focal distance. Next, press it
all the way down (Full-press) to shoot.
When your subject is not in the center of your composition,
compose your photo after focusing. (Focus Lock)
1
Press the POWER button to turn the
camera on, and turn the mode dial to
5.
2
Put the subject of your photo in the center of the
screen and press the shutter release button
halfway.
•
•
The camera focuses on the subject and the exposure and white
balance are fixed.
If automatic focusing fails, a red
frame is displayed in the center of the
picture display.
•
The focal distance is measured at a
maximum of nine points. Green
frames appear to indicate the
positions that are in focus.
Frame
34Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
To take a picture with the subject in the foreground
in focus against a background, half-press the
shutter release button to focus on the subject, and
then compose your shot.
Subject to be focused on
Shooting range
Gently press the shutter release button all the way.
•
The still image you have taken appears momentarily on the picture
display and is recorded to the internal memory or SD memory card.
About Focusing -----------------------------------------------------------------------------------
The color of the frame in the center of the picture display indicates whether the subject
is in or out of focus.
Focus Status
Before focusing
Subject in focus
Subject not in focus
Frame Color
White
Green
Red (Flashing)
It may be impossible to bring the following subjects into focus, or they may not be in
focus even when the frame color is green.
•
Objects that lack contrast, such as the sky, a wall that is only one color, or the hood of a car.
• Flat two-dimensional objects with only horizontal lines and no significant protrusions.
• Quickly moving objects.
• Things in poorly lit places.
• Areas with strong backlighting, or reflections.
• Things that flicker, such as fluorescent lights.
• Point light sources, such as light bulbs, spotlights, or LEDs.
When you want to shoot subjects like this, first focus on an object the same distance
as your subject and then shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.35
Note ---------------------------------------------------------------------------------------------------
•
•
Press the shutter release button gently to prevent camera shake.
The J symbol indicates that camera shake may occur. Hold the camera still and focus
the camera again. You can also turn on the camera shake correction function to minimize
blurring. (G P.121)
•
The auxiliary flash fires to increase the AE accuracy.
36Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting with Easy Shooting Mode
Turning the mode dial to EASY limits the shooting functions that
can be changed and allows you to shoot with easy operations and
without having to make any complicated settings.
With this mode, even first-time users can comfortably use the
camera without worrying about the settings. This is useful when
sharing the camera with other family members or asking someone
to take your picture while on vacation.
If the camera detects a face anywhere in the frame, it will set
focus, exposure, and white balance for the detected face.
1
2
Turn the mode dial to EASY.
Press the shutter release button to
shoot the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.37
Note ---------------------------------------------------------------------------------------------------
• The shooting menu can only be used to set [Picture Quality/Size] and [Date Imprint].
For the operating procedure, see P.101 and P.123. The other shooting menu items
are fixed at their default settings (G P.234), except for [ISO Setting] which is fixed
at [Auto] or [Auto-Hi] depending on the flash mode.
• When the mode dial is set to easy shooting mode, the quantity and order of the items
in the setup menu are different from other shooting modes. The contents of the
settings are the same as other modes.
• Flash, macro, and self-timer settings that are changed in another mode return to their
default settings when easy shooting mode is selected.
• Macro mode can not be selected with the ADJ./OK button in easy shooting mode.
Instead, the camera automatically enters macro mode when the subject is close to
the camera and a Nicon is displayed. The minimum distance to the subject and the
dimensions of the area photographed at this distance are shown below.
Zoom
Position
Focal
Length
Minimum Shooting Shooting Range
Distance (from the
(*)
front of the lens)
Wide-angle 28 mm
300 mm
Approx. 8 cm
Approx. 27 cm
Approx. 111 mm × 83 mm
Approx. 45 mm × 34 mm
(when digital zoom is not used)
Telephoto
1440 mm Approx. 27 cm
Approx. 9.4 mm × 7.0 mm
(when 4.8× digital zoom is used)
(*)
Equivalent to that on a 35 mm camera
38Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Zoom Function
Turning the zoom lever toward z(Telephoto) allows you to take
a close-up picture of the subject.
Turning the zoom lever toward Z(Wide-angle) allows you to take
a wide-angle picture.
Wide-angle Telephoto
1
With the camera ready to
shoot, turn the zoom lever
toward zor Z.
•
You can check the zoom status on
the zoom bar of the picture display.
•
Low speed zooming and high speed
zooming are available. Turning the
zoom lever just slightly toward z
operates the zoom at low speed. Hold the zoom lever at zto
activate to high-speed zoom.
2
3
Compose your picture and half-press the shutter
release button.
Full-press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.39
Using the Digital Zoom -------------------------------------------------------------------------
While you can use the normal zoom to enlarge the subject up to 10.7×, digital zooming
allows you to enlarge the subject still further (up to another 4.8× for still images or 4.0×
for movies).
To use digital zooming, turn and hold the zoom lever toward zuntil the maximum
magnification is reached on the zoom bar, then momentarily release the zoom lever,
and then turn the zoom lever again toward z.
If [Picture Quality/Size] is set to 3456 × 2592, you can also set [Digital Zoom Image] to
[Auto Resize]. (G P.185)
Note ---------------------------------------------------------------------------------------------------
• You can also set the focal length of the zoom so that it stops at eight levels.
(G P.173)
• The digital zoom cannot be used with dynamic range double-shot or multi-target AF.
40Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Close-Ups (Macro Shooting)
The macro shooting function lets you take shots of subjects that
are very close to the lens.
This is good for shooting small subjects because you can shoot
up to approximately 1 cm (0.4 in.) away from the front of the lens.
1
Press the ADJ./OK button
toward N(Macro).
• Nis displayed momentarily at the
center of the picture display and
then Nis displayed at the top of the
screen.
2
3
Compose your picture and
half-press the shutter release button.
Full-press the shutter
release button.
•
To cancel macro mode, press the
ADJ./OK button toward Nagain.
Download from Www.Somanuals.com. All Manuals Search And Download.41
Note ---------------------------------------------------------------------------------------------------
• If macro mode is selected when the zoom position is set to the wide-angle side (28
mm focal length*), the zoom position is automatically fixed at 31 mm*. (* Equivalent
to that on a 35 mm camera)
• The minimum shooting distance and shooting range when using the zoom are shown
below.
Zoom
Position
Focal
Length
Minimum Shooting Shooting Range
Distance (from the
(*)
front of the lens)
Wide-angle 31 mm
300 mm
Approx. 1 cm
Approx. 27 cm
Approx. 28 mm × 21 mm
Approx. 45 mm × 34 mm
(when digital zoom is not used)
Telephoto
1440 mm Approx. 27 cm
Approx. 9.4 mm × 7.0 mm
(when 4.8× digital zoom is used)
(*)
Equivalent to that on a 35 mm camera
• During macro shooting, the minimum shooting distance changes depending on the
zoom position. To display the minimum shooting distance on the screen, set
[Minimum Distance] to [Show]. (G P.190)
• To take a further close-up picture during macro shooting, use [Zoom Macro] in scene
mode. (G P.74)
• In macro mode, [Focus] (G P.103) functions according to the [Spot AF] setting
even if it is set to [Multi AF], [Snap], or [A ]. (Not applicable for easy shooting mode.)
• The availability of macro shooting for each scene mode is shown below.
Scene Mode
Macro Shooting
Portrait
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Sports
Night. Port.
Landscape
Nightscape
High Sens
Discreet Mode
Zoom Macro
Macro shooting only
Enabled
High Contrast B&W
Miniaturize
Enabled
Skew Correct Mode
Text Mode
Enabled
Enabled
42Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Flash
You can select the flash mode that best suits your shot. At the time
of purchase, the camera is set to [Auto].
Flash Range
* When ISO Setting (G P.128) is set to [Auto] or [ISO 800]
Wide-angle
Telephoto
Approx. 20 cm to 3.0 m (from the front of the lens)
Approx. 28 cm to 4.0 m (from the front of the lens)
Flash Modes
Flash Off
The flash will not fire.
Auto
The flash fires automatically when the subject is poorly lit
or backlit.
Red-Eye Flash
Reduces the red-eye phenomenon, in which people’s eyes
appear red in pictures.
(*)
Flash On
The flash fires regardless of the lighting conditions.
(*)
Flash Synchro.
The flash fires with the shutter speed slowed. This is useful
when taking portrait pictures in a nightscape. Camera
shake may occur, so the use of a tripod is recommended.
(*)
This function is not available in easy shooting mode.
1
Press the ADJ./OK
button toward F(flash).
•
The list of the flash modes
symbol is displayed on the
picture display.
2
Press the ADJ./OK
button !"to select the flash mode.
•
The flash mode symbol is displayed at the upper left of the
picture display.
•
The flash mode symbol blinks at the upper left of the picture
display when the flash is charging. Once the flash is charged,
the symbol stops blinking and lights steadily and the camera is
ready to shoot.
Download from Www.Somanuals.com. All Manuals Search And Download.43
Note ---------------------------------------------------------------------------------------------------
• The flash mode setting is retained until you press the ADJ./OK button toward F
(Flash) again.
• The flash does not fire when shooting movies, in continuous mode, in multi-target AF,
in dynamic range double-shot, and in bracket shooting.
• You can adjust the light intensity of the flash. (G P.111)
• The auxiliary flash fires to increase the AE accuracy.
• The flash mode setting for each scene mode is shown below.
Scene Mode
Flash Mode
Initial setting: [Flash Off]
Portrait
Sports
Initial setting: [Flash Off]
Night. Port.
Only [Red-Eye Flash] or [Flash Synchro.] can
be selected.
Initial setting: [Flash Synchro.]
Landscape
Nightscape
Fixed at [Flash Off]
Only [Flash Off], [Auto] or [Flash Synchro.] can
be selected.
Initial setting: [Auto]
High Sens
Initial setting: [Flash Off]
Fixed at [Flash Off]
Discreet Mode
Zoom Macro
Initial setting: [Flash Off]
Initial setting: [Flash Off]
Initial setting: [Flash Off]
Initial setting: [Flash Off]
Initial setting: [Flash Off]
High Contrast B&W
Miniaturize
Skew Correct Mode
Text Mode
44Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Self-Timer
You can set the self-timer to shoot after either two or ten seconds,
or you can select [Custom] to customize the self-timer setting.
With [Custom], you can take a set number of pictures at a set
interval. Use [Custom Self-Timer] on the shooting menu to set the
shooting interval and number of pictures for [Custom]. (G P.118)
1
With the camera ready to shoot, press the t(Self-
timer) button.
•
A list of self-timer mode settings appears on the picture display.
2
Press the ADJ./OK button !"to select a mode.
•
The Self-timer symbol appears
on the screen.
•
The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the
camera shoots after 10 seconds.
3
Press the shutter release button.
•
•
•
When set to [10], the self-timer lamp lights for 8 seconds when
the self-timer starts and then blinks for the final 2 seconds before
the picture is taken.
When set to [Custom], the self-timer lamp blinks for 2 seconds
before each picture is taken, and pictures are taken at the set
shooting interval. The focus position is set for the first shot.
When set to [Custom], press the MENU button to cancel the self-
timer during shooting.
Note ---------------------------------------------------------------------------------------------------
• The camera remains in self-timer mode even after the image is shot. To cancel the
self-timer, press the tbutton and change the self-timer setting to [Self-Timer Off].
• When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink.
• You can only select [10] in easy shooting mode.
• When the self-timer is set, the [Interval Shooting] setting is disabled.
• [Custom] is not available when [Focus] is set to [Multi-trgt AF].
• If [Focus] is set to [Multi-trgt AF] while [Custom] is selected, [Custom] is canceled and
the self-timer is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.45
Playing Back Images
Viewing Your Images
In playback mode, you can check still images you have taken. You
can also delete or zoom in on the images.
1
Press the 6(Playback)
button.
•
•
•
The camera switches to playback
mode and the last image taken is
displayed.
If the camera is off, press the 6
button for about a second to turn
the camera on and start playback.
Pressing the ADJ./OK button !"#$displays the files in the
following order.
10 files backward
1 file backward
1 file forward
10 files forward
46Download from Www.Somanuals.com. All Manuals Search And Download.
•
Files displayed with the S
symbol are images taken with
M-Cont Plus, Speed Cont, or
Multi-trgt AF. See P.132 for more
information on playing back
images.
•
To switch the camera from playback mode to shooting mode,
press the 6button again.
Note ---------------------------------------------------------------------------------------------------
Setting your favorite image files to [Flag Function Setting] on the playback menu allows
you to easily display these files. (G P.140)
Checking the image in shooting mode----------------------------------------------------
In shooting mode, immediately after you take a still image, the still image is displayed
on the screen for a moment so you can check it. You can change the image display
time using [LCD Confirmation Time] on the setup menu. (G P.182)
When [LCD Confirmation Time] is set to [Hold], the image remains displayed until the
next time you half-press the shutter release button. When [LCD Confirmation Time] is
set to [Hold], the displayed image can also be enlarged or deleted. (G P.50, 52)
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing and holding the 6(Playback) button turns the
camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6button, pressing the 6button
again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.47
Thumbnail View
When playing back images on the picture display, the playback
screen can be divided into 20 frames or 81 frames.
1
Press the 6(Playback)
button.
•
The last file recorded is displayed.
2
Turn the zoom lever toward
9(Thumbnail View).
•
The screen is divided into 20
frames and thumbnails are
displayed.
Last File
3
Turn the zoom lever toward
9again.
•
The screen is divided into 81
frames and thumbnails are
displayed.
48Download from Www.Somanuals.com. All Manuals Search And Download.
Switching to Single-Picture Display
1
Press the ADJ./OK button !"#$to select a file.
2
Press the ADJ./OK button or turn the zoom lever
once or twice toward 8(Enlarged View).
Download from Www.Somanuals.com. All Manuals Search And Download.49
Enlarging Images
You can enlarge a still image displayed on the picture display.
Image Size
Enlarged View (maximum magnification)
3.4×
640 × 480
1280 × 960
6.7×
Image sizes other than those above
16×
1
Press the 6(Playback) button.
•
The last file recorded is displayed.
2
3
Press the ADJ./OK button !"#$to display the still
image you want to enlarge.
Turn the zoom lever toward 8(Enlarged View).
•
The still image is enlarged.
•
Pressing the ADJ./OK button in enlarged view changes the
magnification as follows.
If [Picture Quality/Size] is N2048(3M) or larger:
In enlarged view at magnifications of less than 8×, the
magnification increases to 8×. In enlarged view at
magnifications of 8× or more, the magnification increases to
16×.
If [Picture Quality/Size] is N1280(1M) or smaller:
The magnification increases to the maximum magnification.
50Download from Www.Somanuals.com. All Manuals Search And Download.
•
Pressing the DISP. button at this point changes the display as
follows.
Last File
DISP. button
Pressing the ADJ./OK button
!"#$at this point moves
the area displayed.
Pressing the ADJ./OK button
!"#$at this point moves
the area displayed.
Last File
Pressing and
holding the
Pressing and
holding the
DISP. button
DISP. button
Pressing the ADJ./OK button #$
at this point displays the previous
or next image enlarged.
When an MP file or a movie is
displayed, the display returns to
the normal size.
4
Turn the zoom lever toward 9(Thumbnail View) to
return to the original size.
Note ---------------------------------------------------------------------------------------------------
• When [LCD Confirmation Time] is set to [Hold] on the setup menu (G P.182), the
image displayed on the screen after being taken can be enlarged.
• Movies cannot be enlarged.
• For information on how to enlarge MP files, see P.132 - 133.
Download from Www.Somanuals.com. All Manuals Search And Download.51
Deleting Files
You can delete unwanted or failed shooting files from the SD
memory card or internal memory.
Note ---------------------------------------------------------------------------------------------------
• You can use the [Recover File] function to restore needed files that you accidentally
deleted. (G P.162)
• When [LCD Confirmation Time] is set to [Hold] on the setup menu (G P.182), the
image displayed on the screen after being taken can be deleted.
1
Press the 6(Playback)
button.
2
Press the ADJ./OK button
!"#$to display the file you
want to delete.
•
To delete multiple files, you can
also turn the zoom lever toward 9(Thumbnail View) to display
thumbnail view, and then go to Step 3.
3
Press the D(Delete) button.
Deleting a File
4
Press the ADJ./OK button
!"to select [Delete One].
•
You can change the image for
deletion with the button #$.
5
Press the ADJ./OK button.
52Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying Multiple Files Separately
4
Press the ADJ./OK button !"to select [Delete
Multi] and then press the ADJ./OK button.
•
If thumbnail view was displayed in Step 2 on P.52, skip Step 4.
5
6
Press the button !"to select [Sel. Indiv.] and then
press the ADJ./OK button.
Press the ADJ./OK button
Delete
Last File
!"#$to select the file you
want to delete and press the
ADJ./OK button.
•
The trash symbol is displayed in
the upper left corner of the file.
Sel/Cancel
Execute
•
Press the MENU button to switch
to the display for specifying a range of files. See Step 6 and
beyond on P.54.
7
Repeat Step 6 to select all the files you want to
delete.
•
If you selected a file by mistake, you can deselect it by selecting
the file and pressing the ADJ./OK button.
8
9
Press the D(Delete) button.
Press the ADJ./OK button
#$to select [Yes] and then
press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.53
Specifying a Range of Multiple Files
4
Press the ADJ./OK button !"to select [Delete
Multi] and then press the ADJ./OK button.
•
If thumbnail view was displayed in Step 2 on P.52, skip Step 4.
5
6
Press the ADJ./OK button !"to select [Sel. Range]
and then press the ADJ./OK button.
Press the button !"#$to
Delete
select the starting point of
the range of files you want to
delete and press the ADJ./
OK button.
End
Cancel
•
If you make a mistake when
selecting the starting point for the
range of files, press the DISP. button to return to the screen for
selecting the starting point.
•
Press the MENU button to switch to the display for specifying
files separately. See Step 6 and beyond on P.53.
7
Press the button !"#$to
select the ending point of
the range of files you want to
delete and press the ADJ./
OK button.
•
The trash symbol is displayed in
the upper left corner of the
specified files.
8
9
Repeat Steps 6 and 7 to specify all the ranges of
files you want to delete.
Press the D(Delete) button.
54Download from Www.Somanuals.com. All Manuals Search And Download.
10 Press the ADJ./OK button #$to select [Yes] and
then press the ADJ./OK button.
Deleting All Files
4
5
Press the ADJ./OK button !"to select [Delete All]
and then the ADJ./OK button.
Press the button #$to select [Yes] and then press
the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.55
Changing the Display with
the DISP. Button
Pressing the DISP. button allows you to change the screen
display mode and toggle the information displayed on the
picture display.
ꢀDuring Shooting Mode
Normal Symbol Display
Histogram Display
Grid Guide Display
Press the DISP. button to
change the display.
Picture Display Off
No Display
(Synchro-Monitor Mode)
Grid Guide Display-------------------------------------------------------------------------------
• This displays auxiliary lines on the picture display to help you compose your picture.
These lines are not recorded with images.
• See P.188 for information on choosing a grid guide.
Synchro-Monitor Mode -------------------------------------------------------------------------
This turns the picture display off except when the camera is operated. This is effective
for saving power consumption. In this mode, pressing the shutter release button
halfway turns the picture display on. Subsequently, pressing the shutter release button
fully displays the shot image on the picture display and then turns the picture display
off.
(This setting is different from [LCD Auto Dim] in the setup menu.)
Note ---------------------------------------------------------------------------------------------------
• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the shooting
information display frame can be displayed for normal symbol display and histogram
display. (G P.189)
• In easy shooting mode, the display cannot be changed using the DISP. button.
56Download from Www.Somanuals.com. All Manuals Search And Download.
• Histograms are not displayed in movie mode. A blinking [ꢀ REC] icon, the
recording time, and the time available are displayed during recording even when
indicators are hidden or the grid guide is displayed.
• When [Level Setting] is set to [Display] or [Display+Sound] (G P.187), the level
indicator is displayed during normal symbol display and histogram. (G P.58)
• If any of the following operations is performed, the picture display turns on even when
it is turned off.
• When the ADJ./OK button, MENU button, DISP. button, or 6(Playback) button
is pressed.
• When the zoom lever is turned.
• When the ADJ./OK button is pressed toward !"during manual focus.
(G P.105)
ꢀDuring Playback Mode
Histogram and Detailed
Information Display
Normal Symbol Display
No Display
White Saturation
Highlights Display
Press the DISP. button to change the display.
White Saturation Highlights Display -------------------------------------------------------
The white saturation areas of the image flash in black. White saturation is the loss of
tone that indicates the color shading in an image in which very bright areas of the
subject are rendered in white. An image with a loss of image tone cannot be edited
later. It is recommended that you shoot another image by changing the composition or
by setting the exposure level lower (-). (G P.124)
Note ---------------------------------------------------------------------------------------------------
The white saturation highlights display is for reference only.
Download from Www.Somanuals.com. All Manuals Search And Download.57
About the Electronic Level
When [Level Setting] is turned on in the setup menu or by pressing
and holding the DISP. button (G P.187), the camera uses a level
indicator and level sound to let you know whether the image is level
during shooting. The level indicator is displayed during normal
symbol display and histogram.
This is useful for keeping the image level when taking pictures of
scenery or buildings. This is also very useful for taking pictures with
the horizon visible.
For information on how to set [Level Setting], see P.187.
ꢀ With [Level Setting] set to [Display]:
The level indicator appears on the picture display. The level sound
will not emit.
ꢀ With [Level Setting] set to [Display+Sound]:
The level indicator appears on the picture display. When the
camera is level, the level sound is continually emitted at a set
interval.
ꢀ With [Level Setting] set to [Sound]:
When the camera is level, a level sound is continually emitted at a
set interval and the level indicator is not displayed.
58Download from Www.Somanuals.com. All Manuals Search And Download.
Level indicator display
When level:
The level indicator becomes green, indicating that
the scale is in the middle.
Green
When tilted to the right or left:
The mark on the level indicator becomes orange,
indicating the opposite side of the direction in which
the camera is tilted.
Orange
When the camera is tilted too far to the right or left:
Half of the level indicator on the opposite side of the
direction in which the camera is tilted becomes red.
The mark on the level indicator is not displayed.
Red
When the camera is tilted too far forward or backward,
or it cannot be determined whether the camera is level:
The top and bottom of the level indicator become
red. The mark on the level indicator is not
displayed.
Red
When the camera is held vertically:
When shooting with the camera positioned
vertically, the level function can be used to
determine whether the image is vertically level.
Caution-----------------------------------------------------------------------------------------------
• During grid guide display, no display, or when the picture display is turned off
(G P.56), the level sound is emitted, but the level indicator is not displayed. When
[Level Setting] is set to [Display+Sound], only the level sound is emitted.
• The level function is not available if the camera is held upside down, when recording
movies, and during interval shooting.
• The level function becomes less accurate when the camera is moving or when
shooting in an environment subject to moving, such as on a amusement ride.
• No level sound is emitted when [Level Setting] is set to [Display+Sound] or [Sound]
and [Volume Settings] is set to [ꢁ ꢁ ꢁ] (Mute) (G P.187).
• Use this function as a reference to see if images are level when shooting images.
The accuracy of the level when using the camera as a level cannot be guaranteed.
Download from Www.Somanuals.com. All Manuals Search And Download.59
About the Histogram Display
When Histogram is on, a histogram
appears in the lower right corner on the
picture display. A histogram is a graph
indicating the number of pixels on the
vertical axis and the brightness on the
horizontal axis (from left to right,
shadows (dark areas), midtones, and
highlights (bright areas)).
By using the histogram, you can determine the brightness of an
image without being affected by the brightness around the picture
display. This also helps you correct for areas that are overly bright
or dark.
If the histogram has only peaks on the
right side, this picture is overexposed
with too many pixels only for highlight
sections.
If the histogram has only peaks on the
left side without anything else, this
picture is underexposed with too many
pixels only for shadow sections. Refer
to this histogram when correcting the
exposure.
Note ---------------------------------------------------------------------------------------------------
• The histogram displayed on the picture display is for reference only.
• After taking a picture, you can correct its brightness and contrast by making
adjustments to the histogram. (G P.147)
• Depending on the shooting conditions (use of the flash, dark surrounding light, etc.),
the exposure level indicated in the histogram may not correspond to the brightness
of the shot image.
• Exposure compensation has its limitation. It does not necessarily achieve the best
possible result.
• A histogram with peaks in the center may not necessarily provide the best result to
suit your particular requirements.
For example, an adjustment is required if you want to underexpose or overexpose
the image.
• For information on how to correct the exposure compensation, see P.124.
60Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Operations
1
Read this section when
you want to learn more
about the different
2
camera functions.
3
1
2
ADJ. Button Functions ..............62
4
Using the Fn (Function) Button
.....................................................66
3
4
5
6
7
8
9
Shooting Mode Types................74
Shooting Menu ...........................97
Playback Functions .................131
Playback Menu .........................138
Setup Menu...............................165
Direct Printing ..........................197
5
6
7
Downloading Images to Your
Computer ..................................204
8
10 Appendices...............................221
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1 ADJ. Button Functions
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
1
The ADJ./OK button has the following functions. For the operating
procedure of each function, see the corresponding reference page.
1 Assigning four functions from the shooting menu (G P.62)
2 Shifting the AE and AF targets (G P.64)
Assigning Functions from the Shooting Menu
You can assign four functions from the shooting menu to the ADJ./
OK button. The fifth function is fixed to AE/AF target shift (G P.64)
and cannot be changed.
By using the ADJ./OK button, you can make settings with fewer
button operations and without displaying the shooting menu. This is
convenient for frequently used functions.
1
Set the functions you want to assign to the ADJ./OK
button with [ADJ Button Setting 1/2/3/4] on the setup
menu.
• At the time of purchase, four of the functions are assigned. You can
change the assigned functions. For the operating procedure, see
P.176.
2
In shooting mode, press the ADJ./OK button.
• The ADJ. mode screen appears.
62Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press the ADJ./OK button #$to select the desired
item.
• The screenshots below are examples of the screen display when
[Exposure Comp.], [White Balance], [ISO], and [Quality] are assigned
to [ADJ Button Setting 1] to [ADJ Button Setting 4] with the setup
menu.
• The fifth icon (AE/AF target shift) is fixed and cannot be changed in the
setup menu.
1
ADJ Button Setting 1
(AE/AF target shift G P.64)
ADJ Button Setting 2
ADJ Button Setting 4
ADJ Button Setting 3
4
5
Press the ADJ./OK button !"to select the desired
setting.
Press the ADJ./OK button to confirm the setting.
Note ----------------------------------------------------------------------------------------------
For functions that can be assigned to the ADJ./OK button and instructions on how to
assign them, see P.176.
Download from Www.Somanuals.com. All Manuals Search And Download.63
Shifting the AE and AF Targets
When you are taking a picture, you can use the ADJ./OK button to
shift the target for the automatic exposure (AE) and/or the auto
focus (AF) without having to move the camera. This is particularly
useful when you are using a tripod to take pictures.
Available Setting
AE/AF
Description
AE and AF are set to Spot AE and Spot AF respectively and the target
can be moved for both simultaneously. (The targets for Spot AE and
Spot AF occupy the same position.)
1
AF
AE
The AF is set to Spot AF and the target can be moved. The exposure
metering is set to the mode selected in [Exposure Metering] in the
shooting menu. (G P.108)
The AE is set to Spot AE and the target can be moved. The focus is
set to the mode selected in [Focus] in the shooting menu. (G P.103)
1
Turn the mode dial to 5, Q or R .
2
3
Press the ADJ./OK button in shooting mode.
Press the ADJ./OK button #$
to select P .
4
Press the button !"to select
the setting and then press the
AE/AF
AF
AE
ADJ./OK button.
Off
Move Slctn
Ok
• The target shift screen appears.
5
Press the button !"#$to
move the cross-mark to the
desired target position.
• Pressing the DISP. button returns the
display to the screen in Step 3.
6
7
Press the ADJ./OK button.
Select
Ok
Half-press the shutter release button.
• If [AE/AF] is selected, the Spot AE/Spot AF position is displayed.
• If [AF] is selected, the Spot AF position is displayed.
• If [AE] is selected, the Spot AE position and focusing frame are displayed.
8
Gently press the shutter release button all the way.
64Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
In scene mode and movie mode, the macro target can be shifted by pressing the ADJ./
OK button and selecting U . See Step 3 and beyond on P.67 for the operating
procedure after selecting U
.
•
•
•
If the macro target shift function is activated using the Fn button (G P.67) and not
canceled, P will not be displayed even if the ADJ./OK button is pressed.
You cannot use the AE/AF target shift function if [Focus] (G P.103) is set to
[Continuous AF], [Multi-trgt AF], or [MF].
If the following operations are performed after shifting the target, the shifted target
returns to the center.
1
•
•
The [AE], [AF], or [AE/AF] settings are changed.
[Focus] is set to [Continuous AF], [Multi-trgt AF], or [MF].
Download from Www.Somanuals.com. All Manuals Search And Download.65
2 Using the Fn (Function) Button
When a function is assigned to the Fn (Function) button with [Set Fn
Button] on the setup menu (G P.174), you can easily switch from
one function to another simply by pressing the Fn button.
The following functions can be assigned to the Fn button. For the
operating procedure of each function, see the corresponding
reference page.
Available Setting
Macro Target
*Default setting
Description
Refer to
P.67
Moves the AF target without moving the camera to
shoot close-ups.
AE Lock
Locks the exposure.
Switches between auto focus (*) and continuous AF. P.69
Switches between auto focus and multi-target AF.
Switches between auto focus and manual focus.
Switches between auto focus and snap mode.
Switches between on and off for each function.
P.68
2
AF/Cont. AF
AF/M-trgt AF
AF/MF
(*)
P.70
P.71
P.72
P.73
(*)
(*)
AF/Snap
Step Zoom, AT-BKT,
WB-BKT, CL-BKT,
FOCUS-BKT
(*)
[Multi AF] or [Spot AF]
Note ----------------------------------------------------------------------------------------------
•
•
For information on the items that can be assigned in each shooting mode, see P.177.
The Fn button can not be used as described above when [Miniaturize] is selected in
scene mode.
•
•
Pressing the Fn button in playback mode displays the image assigned with [Flag
Function Setting]. For the operating procedure, see P.140-142.
Selecting [Trim], [Level Compensation] (when [Manual] is selected), or [White
Balance Compensation] on the playback menu, and pressing the Fn button displays
the screen that describes the operating procedure. (G P.144, 148, 150)
66Download from Www.Somanuals.com. All Manuals Search And Download.
Shifting the AF Target for Macro Shooting
You can shift the AF target without moving the camera to take a
close-up picture. You can lock the focus (G P.34) at the position
where the macro target is shifted and shoot the picture. This is
particularly useful when you are using a tripod to take pictures.
1
Set [Set Fn Button] to [Macro Target] on the setup
menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
2
• The macro target shift screen
appears.
3
Press the ADJ./OK button
!"#$to move the cross-
mark to the desired target
position.
4
5
6
Press the ADJ./OK button.
• Pressing the DISP. button cancels the macro target shift function.
Half-press the shutter release button.
• The camera focuses on the area at the position of the cross-mark.
Gently press the shutter release button all the way.
• Pressing the ADJ./OK button toward N(Macro) cancels the macro
target shift function.
Note ----------------------------------------------------------------------------------------------
If the AE/AF target shift function is activated using the ADJ./OK button (G P.64) and
not canceled, the AE/AF target shift function cannot be used by pressing the Fn button.
Download from Www.Somanuals.com. All Manuals Search And Download.67
Locking the Exposure
Assigning [AE Lock] to the Fn (Function) button (G P.174) and
then pressing the Fn button during shooting allows you to lock or
cancel the exposure.
1
Turn the mode dial to 5, SCENE, R or Q .
2
Set [Set Fn Button] to [AE Lock] on the setup menu.
• For the operating procedure, see P.174.
3
4
Check that the camera is ready to shoot.
2
Put the subject of your photo in the center of the picture
display and press the Fn button.
• The exposure is locked and the AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn button again cancels
the AE lock.
Note ----------------------------------------------------------------------------------------------
•
•
The AE lock function can only be used when [Time Exposure] is set to [Off].
AE lock is not available when [AUTO] is selected for [Dynamic Range Expansion].
68Download from Www.Somanuals.com. All Manuals Search And Download.
AF/Cont. AF
If [AF/Cont. AF] is assigned to the Fn (Function) button (G P.174),
the Fn button can be used to toggle between [Continuous AF] and
whichever of [Multi AF] and [Spot AF] is currently selected for
[Focus] (or, if [Continuous AF] is selected for [Focus], between
[Continuous AF] and whichever of [Multi AF] and [Spot AF] was last
selected for [Focus] before [Continuous AF]).
[Focus] setting
Multi AF
Spot AF
Press the Fn button
Switches between [Continuous AF] and [Multi AF].
Switches between [Continuous AF] and [Spot AF].
2
Continuous AF
Switches between [Continuous AF] and whichever of [Multi AF] and
[Spot AF] was last selected for [Focus].
1
Set [Set Fn Button] to [AF/Cont. AF] on the setup menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
[Continuous AF], the symbol appears
on the screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [M-trgt AF], [Snap], [MF] or [A ] (G P.103), pressing the Fn
button does not switch between AF and Continuous AF.
Note ----------------------------------------------------------------------------------------------
You can also use the shooting menu to make the [Focus] setting. (G P.103)
Download from Www.Somanuals.com. All Manuals Search And Download.69
AF/M-trgt AF
If [AF/M-trgt AF] is assigned to the Fn (Function) button (G P.174),
the Fn button can be used to toggle between [Multi-trgt AF] and the
AF mode currently selected for [Focus] (or, if [Multi-trgt AF] is
selected for [Focus], between [Multi-trgt AF] and whatever AF mode
was last selected for [Focus] before [Multi-trgt AF]).
[Focus] setting
Multi AF
Spot AF
Continuous AF
Multi-trgt AF
Press the Fn button
Switches between [Multi-trgt AF] and [Multi AF].
Switches between [Multi-trgt AF] and [Spot AF].
Switches between [Multi-trgt AF] and [Continuous AF].
Switches between [Multi-trgt AF] and the AF mode last selected for
[Focus].
2
1
Set [Set Fn Button] to [AF/M-trgt AF] on the setup
menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
[Multi-trgt AF], the symbol appears
on the screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Snap], [MF] or [A ] (G P.103), pressing the Fn button does
not switch between AF and multi-target AF.
Note ----------------------------------------------------------------------------------------------
•
•
For information on how to use multi-target AF, see P.104.
You can also use the shooting menu to make the [Focus] setting. (G P.103)
70Download from Www.Somanuals.com. All Manuals Search And Download.
AF/MF
If [AF/MF] is assigned to the Fn (Function) button (G P.174), the
Fn button can be used to toggle between [MF] and the AF mode
currently selected for [Focus] (or, if [MF] is selected for [Focus],
between [MF] and whatever AF mode was last selected for [Focus]
before [MF]).
[Focus] setting
Multi AF
Spot AF
Continuous AF
MF
Press the Fn button
Switches between [MF] and [Multi AF].
Switches between [MF] and [Spot AF].
Switches between [MF] and [Continuous AF].
Switches between [MF] and the AF mode last selected for [Focus].
2
1
Set [Set Fn Button] to [AF/MF] on the setup menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
manual focus, the [MF] symbol
appears at the upper right of the
screen.
Hold
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Multi-trgt AF], [Snap] or [A ] (G P.103), pressing the Fn
button does not switch between AF and MF.
Note ----------------------------------------------------------------------------------------------
•
•
For information on how to use manual focus, see P.105.
You can also use the shooting menu to make the [Focus] setting. (G P.103)
Download from Www.Somanuals.com. All Manuals Search And Download.71
Locking the focus at the focus lock position--------------------------------------
You can press the Fn button to switch AF/MF and lock the focus at the focus lock position
(AF Lock). Use the following operating procedure.
1
With the camera set to auto focus, half-press the shutter release button to focus on
the subject. (Focus Lock)
2
Release the shutter release button and press the Fn button.
•
•
The camera is set to MF and the shooting distance is fixed at the focus lock
position.
To return to auto focus mode, press the Fn button again.
AF/Snap
2
If [AF/Snap] is assigned to the Fn (Function) button (G P.174), the
Fn button can be used to toggle between [Snap] and the AF mode
currently selected for [Focus] (or, if [Snap] is selected for [Focus],
between [Snap] and whatever AF mode was last selected for
[Focus] before [Snap]).
[Focus] setting
Multi AF
Spot AF
Continuous AF
Snap
Press the Fn button
Switches between [Snap] and [Multi AF].
Switches between [Snap] and [Spot AF].
Switches between [Snap] and [Continuous AF].
Switches between [Snap] and the AF mode last selected for [Focus].
1
Set [Set Fn Button] to [AF/Snap] on the setup menu.
• For the operating procedure, see P.174.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
snap mode, the symbol appears at
the upper right of the screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Multi-trgt AF], [MF] or [A ] (G P.103), pressing the Fn button
does not switch between AF and Snap.
Note ----------------------------------------------------------------------------------------------
You can also use the shooting menu to make the [Focus] setting. (G P.103)
72Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Between On and Off for Various
Functions
Assigning one of the following functions to the Fn button (
G
P.174)
and then pressing the Fn button allows you to switch between on
and off for that function.
Step Zoom, AT-BKT, WB-BKT, CL-BKT, FOCUS-BKT
1
Turn the mode dial to 5, SCENE, R or Q .
2
Set [Set Fn Button] to one of the above items on the
setup menu.
2
• For the operating procedure, see P.174.
3
With the camera ready to shoot, press the Fn button.
• This switches between on and off for the selected function.
Note ----------------------------------------------------------------------------------------------
The settings of the functions can be changed using the shooting menu. (G P.97)
Download from Www.Somanuals.com. All Manuals Search And Download.73
3 Shooting Mode Types
Scene Mode (SCENE)
You can use scene mode to select from among twelve still image
modes, and shoot with settings automatically optimized for shooting
conditions.
Scene Modes
Use for portraits. The camera automatically detects, and adjusts focus,
exposure, and white balance, for the subject's face. For detailed
operations, see P.77.
Portrait
Use when taking pictures of moving objects.
Sports
3
Use when taking portrait pictures against a nightscape.
The flash fires automatically. The shutter speed slows down, so be
careful of camera shake.
Night. Port.
Use when taking scenery pictures with abundant greenery or blue sky.
Landscape
Use when shooting night scenes.
In nightscape mode, the flash fires when all of the following conditions
are satisfied:
• The flash is set to [Auto].
Nightscape
• The flash is determined to be necessary because it is dark.
• There is a figure or another object nearby.
Use when taking pictures in dimly lit places. The picture display also
becomes brighter.
High Sens
Use in museums and in other situations in which lights or sounds emitted
by the camera may be unwelcome. The flash, AF auxiliary light, and
speaker turn off and flash, AF auxiliary light, and sound settings can not
be adjusted.
Discreet Mode
Automatically optimizes the zoom position to shoot the subject larger
than with normal macro shooting.
The optical zoom cannot be used in this mode.
For detailed operations, see P.78.
Zoom Macro
74Download from Www.Somanuals.com. All Manuals Search And Download.
Use to create black-and-white images with higher contrast than those
normally produced using black and white (G P.109). Produces grainy
images similar to those taken with highly sensitive film or high gain film
processing.
High Contrast
B&W
Use to create pictures that appear to be photos of dioramas. For detailed
information, see P.79.
Miniaturize
Use to straighten a rectangular object, such as a message board or
business card, shot at an angle to make it look as if it were shot squarely.
For detailed operations, see P.81.
Skew Correct
Mode
3
In skew correction mode, choose from [N1280] or [N640] for [Picture
Quality/Size]. (G P.101)
Use when capturing text images, for example notes written on a
whiteboard at a meeting. Images are captured in black and white.
You can also change the shading of text. (G P.82)
You can set the image size to either 3456 × 2592 or 2048 × 1536 pixels.
(G P.101)
Text Mode
Caution------------------------------------------------------------------------------------------
In [Discreet Mode], the camera does not beep, flash mode can not be selected with the
ADJ./OK button, and the self-timer lamp and beep indicator are disabled in self-timer
mode.
Note ----------------------------------------------------------------------------------------------
For information on the shooting menu items in scene mode, see P.99.
Download from Www.Somanuals.com. All Manuals Search And Download.75
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the
selected scene mode is displayed at
the top of the picture display.
3
2
3
Press the MENU button to change the scene mode.
• The scene mode selection screen appears.
Press the ADJ./OK button
!"#$to select the scene
mode.
4
5
Press the ADJ./OK button.
• The scene mode type is displayed at the top of the picture display.
Press the shutter release button to shoot the picture.
Changing the shooting menu or setup menu setting in scene mode -----
Press the MENU button in shooting mode and then press the ADJ./OK button !"#$
to select the [MODE] tab. Now press the ADJ./OK button "once to display the shooting
menu or twice to display the setup menu. See P.100 or P.166 for more information on
specifying menu settings.
76Download from Www.Somanuals.com. All Manuals Search And Download.
Using Portrait Mode
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
Press the MENU button.
• The scene mode selection screen appears.
3
4
5
Press the ADJ./OK button !"#$to select [Portrait].
Press the ADJ./OK button.
Compose your picture.
• When a face is recognized, a frame with the size of the recognized
face is displayed in blue.
3
• Up to eight frames can be displayed.
6
7
Half-press the shutter release button.
• Even if several faces are recognized, the camera selects the optimal
focus. When a recognized face is focused, the frame for that face is
displayed in green. If the camera cannot focus on a recognized face,
the frame for that face disappears.
• The exposure and white balance are locked.
Gently press the shutter release button all the way.
Caution------------------------------------------------------------------------------------------
The camera may not be able to recognize faces in the following cases:
•
•
•
•
•
When the face is side-view, tilted, or moving
When the camera is tilted or upside down (the shutter release button is facing down)
When part of the face is hidden
When the face is not clearly visible because of dark surroundings
When the subject is too far away (Make sure that the face appearing in the picture
display is vertically longer than 1 block marked by the grid guide G P.56)
When the face is at the edge of the picture display
•
Download from Www.Somanuals.com. All Manuals Search And Download.77
Shooting in Zoom Macro Mode
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
3
Press the MENU button.
• The scene mode selection screen appears.
Press the ADJ./OK button !"#$to select [Zoom
Macro].
4
5
Press the ADJ./OK button.
Turn the zoom lever toward z(Telephoto) or Z(Wide-
angle).
3
• The zoom level appears on the picture display.
6
7
Compose your picture and half-press the shutter
release button.
Full-press the shutter release button.
Caution------------------------------------------------------------------------------------------
•
If zoom macro mode is selected when the zoom position is set to the wide-angle side
(28 mm focal length*), the zoom position is automatically fixed at 70 mm*. (* Equivalent
to that on a 35 mm camera)
•
When using the zoom macro, you can shoot close-ups within the following distances:
(*)
Focal Length Minimum Shooting Distance Shooting Range
(from the front of the lens)
70 mm
Approx. 1 cm
Approx. 19 mm × 14 mm
(when digital zoom is not used)
335 mm
Approx. 1 cm
Approx. 4.0 mm × 3.0 mm
(when 4.8× digital zoom is used)
(*)
Equivalent to that on a 35 mm camera
•
If [Picture Quality/Size] is set to 3456 × 2592 and [Digital Zoom Image] is set to [Auto
Resize], the auto resize zoom is activated. (G P.185)
78Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting in Miniaturization Mode
This mode creates pictures that appear to be photos of dioramas.
It is most effective when pictures are taken from a high vantage
point.
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
3
Press the MENU button.
• The scene mode selection screen appears.
Press the ADJ./OK button !"#$to select
[Miniaturize].
3
4
5
Press the ADJ./OK button.
Press the Fn button.
• Miniaturization settings will be
displayed, with the areas that will not
be in focus in the final photograph
shown in gray.
• Press the DISP. button to exit without
taking a picture.
Note ----------------------------------------------------------------------------------------------
When taking pictures in tall orientation, press the
Dbutton to re-orient the area that will be in focus.
Download from Www.Somanuals.com. All Manuals Search And Download.79
6
7
Press ADJ./OK button !"to
reposition the area that will be
in focus.
• For help, press the Fn button. Press
the Fn button again to clear help from
the display.
Press ADJ./OK button #$to
choose the width of the area
that will be in focus.
3
8
9
Press the ADJ./OK button.
Compose your picture and half-press the shutter
release button.
10 Press the shutter release button all the way to shoot the
picture.
Caution------------------------------------------------------------------------------------------
•
•
[Image Settings] is not available in miniaturization mode.
The focus of the final image differs slightly from that in the image displayed immediately
after shooting.
80Download from Www.Somanuals.com. All Manuals Search And Download.
Using Skew Correction Mode
1
Turn the mode dial to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the picture display.
2
3
Press the MENU button.
• The scene mode selection screen appears.
Press the ADJ./OK button !"#$to select [Skew
Correct Mode].
4
5
Press the ADJ./OK button.
Press the shutter release button to shoot the picture.
3
• The display indicates that the image is being processed, and then the
area recognized as the correction range is displayed with an orange
frame. Up to five areas can be recognized.
• If the target area cannot be detected, an error message appears. The
original image remains unchanged.
• To select another correction area, move the orange frame to the target
area by pressing the ADJ./OK button $.
• To cancel skew correction, press the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
6
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
When [Skew Correct Mode] is selected, note the following:
•
To shoot the subject as large as possible, position it so that the entire portion of the
subject is visible on the picture display.
•
The camera may fail to recognize the subject in the following cases:
•
•
•
•
When the image is out of focus
When four edges of the subject are not clearly visible
When it is hard to distinguish between the subject and background
When the background is complicated
•
•
Two images, one before correction and the other after correction, are recorded. If the
number of remaining shots is less than two, you cannot shoot the subject.
The correction area may not be detected properly if the [Date Imprint] function is
activated.
Note ----------------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image. (G P.152)
Download from Www.Somanuals.com. All Manuals Search And Download.81
Changing the Text Density
If you are shooting with [Text Mode] in scene mode, you can use the
ADJ./OK button to change the shading of text.
You can select from [Deep], [Normal] and [Light].
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see “Using the Menu” (G P.100).
1
Turn the mode dial to SCENE.
2
Press the MENU button.
• The scene mode selection screen appears.
3
Press the ADJ./OK button
!"#$to select [Text Mode]
and then press the ADJ./OK
button.
3
4
5
Press the ADJ./OK button.
• The text density menu appears.
Press the ADJ./OK button !"
to select the desired density
setting.
• You can also press the shutter release
button to take the picture.
6
Press the ADJ./OK button.
• The text density setting does not appear on the screen.
82Download from Www.Somanuals.com. All Manuals Search And Download.
My Settings Mode (MY1/MY2)
Setting the mode dial to MY1 or MY2 allows you to shoot with preset
settings. Use [Reg. My Settings] on the setup menu to make the
MY1 and MY2 settings. (G P.171)
1
Turn the mode dial to MY1 or MY2.
• Turn the mode dial to MY1 to make the settings
for [MY1] in [Reg. My Settings].
• Turn the mode dial to MY2 to make the settings
for [MY2] in [Reg. My Settings].
2
Press the shutter release button.
Note ----------------------------------------------------------------------------------------------
3
You can change the camera settings even in My Settings mode. Changing the mode or
turning the camera off returns the changed settings to the original MY1 and MY2 settings.
Download from Www.Somanuals.com. All Manuals Search And Download.83
Dynamic Range Double Shot Mode
(Q )
The “dynamic range” of a digital camera refers to the range of
brightness that can be processed by the camera.
When you shoot a scene with high contrast, such as both a subject
in sunlight and a subject in a shaded area, the bright areas appear
overly bright and the image does not look natural. This is because
the range of brightness that can be processed by the camera is
narrower than that of the human eye.
When you set the mode dial to Q and shoot, the scene is
reproduced with a smooth transition from the bright areas to the
dark areas, allowing you to capture a more natural-looking image.
3
Note ----------------------------------------------------------------------------------------------
With Dynamic Range Double Shot, two consecutive pictures are taken with different
exposures and then the areas with the appropriate exposure are combined together. This
mode uses a longer shooting time than other modes, so be careful of camera shake
when taking pictures. The J symbol is always displayed.
Two consecutive
shots
Combined and
saved
1
Turn the mode dial to Q .
2
Press the shutter release button to
shoot the picture.
84Download from Www.Somanuals.com. All Manuals Search And Download.
Caution------------------------------------------------------------------------------------------
•
•
•
•
The digital zoom is disabled.
The flash cannot be used.
[Continuous AF] is not available for [Focus] (G P.103).
Dynamic range double shot may not be effective if the shooting location is overly
bright or dark.
•
•
[Multi] metering is recommended.
When shooting a fast-moving subject, the subject may be distorted in the recorded
image.
•
Flicker from fluorescent lights may appear as horizontal bands. Fluorescent lighting
may also affect colors and brightness.
Dynamic Range Expansion Effect
You can select from five dynamic range expansion effects, from
[AUTO], [Very Weak], [Weak], [Medium], or [Strong]. The stronger
the expansion effect, the wider the range of brightness that can be
processed by the camera.
3
1
Turn the mode dial to Q .
2
Display the shooting menu.
• For the operating procedure, see P.100.
3
4
Press the ADJ./OK button "to
select [Dynamic Range
Expansion] and press the
button $.
Press the button !"to select
the setting and then press the
ADJ./OK button.
Caution------------------------------------------------------------------------------------------
If [AE Lock] is assigned to the Fn button, exposure can not be locked when [AUTO] is
selected for [Dynamic Range Expansion].
Download from Www.Somanuals.com. All Manuals Search And Download.85
Dynamic Range Expansion Plus Normal
Shooting
This records two images, an image taken with expanded dynamic
range and an image taken with normal shooting.
Expanded dynamic
range image
Normal shooting
image
1
2
Turn the mode dial to Q .
3
Display the shooting menu.
• For the operating procedure, see P.100.
3
4
5
Press the ADJ./OK button "to
select [Plus Normal Shooting]
and press the button $.
Press the button !"to select
[On] and then press the ADJ./
OK button.
Press the shutter release button to shoot the picture.
• The confirmation screen displays a
comparison of the image taken with
normal shooting and the image taken
with expanded dynamic range.
Note ----------------------------------------------------------------------------------------------
The histogram display for both images is displayed on the confirmation screen in Step 5.
When [LCD Confirmation Time] is set to [Hold] (G P.182), the confirmation screen
remains displayed so you can confirm the histograms and easily compare the images.
86Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous Mode (R )
Turn the mode dial to R to use the various continuous shooting
functions.
Caution------------------------------------------------------------------------------------------
The time until image recording is complete may be longer when using the internal
memory.
Note ----------------------------------------------------------------------------------------------
•
•
The flash cannot be used.
The camera shake correction function cannot be used in continuous mode. If you set
the mode dial to R while the camera shake correction function is enabled, E
disappears from the picture display.
•
•
•
The focus, exposure value, and white balance are locked in continuous mode.
ISO sensitivity is raised in continuous shooting mode.
When [Card Sequence No.] is set to [On] (G P.193) and the last four digits of the
file number exceed “9999” during continuous shooting, a separate folder is created in
the SD memory card and successive pictures taken in continuous mode are stored in
this folder.
3
Changing settings on the shooting menu or setup menu
during continuous mode------------------------------------------------------------------
Press the MENU button in shooting mode and then press the ADJ./OK button !"#$
to select the [MODE] tab. Now press the ADJ./OK button "once to display the shooting
menu or twice to display the setup menu. See P.100 or P.166 for more information on
specifying menu settings.
Normal Continuous Mode
This is the normal continuous mode. Pictures continue to be taken
for as long as you hold down the shutter release button. Images are
recorded one at a time, just as in normal shooting.
1
Turn the mode dial to R .
2
Press the MENU button.
• The continuous mode selection screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.87
3
Press the ADJ./OK button !"
to select [Continuous Mode]
and then press the ADJ./OK
button.
• The symbol appears on the screen.
4
5
Compose your picture and
then press and hold the shutter
release button.
• Pictures continue to be taken for as long as you hold down the shutter
release button.
Release your finger from the shutter release button to
stop shooting continuously.
3
Caution------------------------------------------------------------------------------------------
The maximum number of images that can be shot in continuous mode is 999. Even if
there is space in the memory for 1,000 or more images, [999] is displayed on the screen.
Note ----------------------------------------------------------------------------------------------
The number of images that can be shot in continuous mode depends on the image size
setting. (G P.232)
M-Cont Plus (9M)
In this mode, the camera shoots while the shutter-release button is
pressed, but only the last 15 frames (about the last three seconds
of shooting) are recorded to create a single multi-picture (MP) file.
(2) …the camera records the frames taken in the last three seconds.
(1) When you remove your finger from the shutter release button...
88Download from Www.Somanuals.com. All Manuals Search And Download.
1
Turn the mode dial to R .
2
Press the MENU button.
• The continuous mode selection screen appears.
3
4
5
Press the ADJ./OK button !"
to select [M-Cont Plus (9M)].
Press the ADJ./OK button.
• The symbol appears on the screen.
Compose your picture and
then press and hold the shutter
release button.
• The camera memorizes the scene while you hold down the shutter
release button.
3
6
Release your finger from the shutter release button.
• Shooting ends and the last 15 shots (about the last three seconds of
shooting) are recorded in a single MP file.
• If you remove your finger from the shutter-release button before 15
shots are recorded, the MP file will contain all the shots taken while the
shutter-release button was pressed.
Caution------------------------------------------------------------------------------------------
The time needed to record 15 frames may increase if lighting is poor.
Note ----------------------------------------------------------------------------------------------
•
•
Image size is fixed at N3456 (9M).
The date and orientation of each shot in the sequence are recorded separately.
MP file -------------------------------------------------------------------------------------------
MP is a file format for recording a set of still images.
Download from Www.Somanuals.com. All Manuals Search And Download.89
M-Cont Plus (2M)
In this mode, the camera shoots while the shutter-release button is
pressed, but only the last 30 frames (about the last second of
shooting) are recorded to create a single multi-picture (MP) file.
(2) …the camera records the frames taken in the last second.
(1) When you remove your finger from the shutter release button...
3
1
Turn the mode dial to R .
2
Press the MENU button.
• The continuous mode selection screen appears.
3
4
5
Press the ADJ./OK button !"
to select [M-Cont Plus (2M)].
Press the ADJ./OK button.
• The symbol appears on the screen.
Compose your picture and
then press and hold the shutter
release button.
• The camera memorizes the scene while you hold down the shutter
release button.
6
Release your finger from the shutter release button.
• Shooting ends and the last 30 shots (about the last second of
shooting) are recorded in a single MP file.
• If you remove your finger from the shutter-release button before 30
shots are recorded, the MP file will contain all the shots taken while the
shutter-release button was pressed.
90Download from Www.Somanuals.com. All Manuals Search And Download.
Caution------------------------------------------------------------------------------------------
•
•
•
When shooting a fast-moving subject, the subject may be distorted in the recorded
image.
Flickering may be recorded as a horizontal band when shooting under fluorescent
lights.
Date imprint is not available.
Note ----------------------------------------------------------------------------------------------
•
•
The image size is fixed at N1728 (2M).
The date and orientation of the last shot in the sequence are also used for the
remaining frames.
MP file -------------------------------------------------------------------------------------------
MP is a file format for recording a set of still images.
3
Download from Www.Somanuals.com. All Manuals Search And Download.91
Speed Cont
Speed Cont allows you to record 120 consecutive images in the
(approx.) 1 second (120 frames per second) or 120 consecutive
images in the (approx.) 2 seconds (60 frames per second) from
when the shutter release button is pressed. The consecutively shot
still images are grouped together as a set and are recorded as one
MP file.
3
1
Turn the mode dial to R .
2
Press the MENU button.
• The continuous mode selection
screen appears.
3
Press the ADJ./OK button !"
to select either of the
following.
• [Speed Cont (Low)] :
120 consecutive images are recorded in 2 seconds.
• [Speed Cont (High)] :
120 consecutive images are recorded in 1 second.
4
5
Press the ADJ./OK button.
• The symbol appears on the screen.
Compose your picture and then press the shutter
release button.
• 120 consecutive images are taken automatically.
• If you remove your finger from the shutter-release button before 120
shots are recorded, the MP file will contain all the shots taken while the
shutter-release button was pressed.
92Download from Www.Somanuals.com. All Manuals Search And Download.
Caution------------------------------------------------------------------------------------------
•
When shooting a fast-moving subject, the subject may be distorted in the recorded
image.
•
Flickering may be recorded as a horizontal band when shooting under fluorescent
lights.
Note ----------------------------------------------------------------------------------------------
•
•
The image size is fixed at N640 (VGA).
The date and orientation of the last shot in the sequence are also used for the
remaining frames.
MP file -------------------------------------------------------------------------------------------
MP is a file format for recording a set of still images.
3
Download from Www.Somanuals.com. All Manuals Search And Download.93
Movie Mode (3)
Shooting Movies
You can shoot movies with sound.
You can set the image size to either 640 × 480 or 320 × 240 pixels.
You can set the number of frames shot per second (frame rate) to
either 30 or 15.
Each movie you shoot is recorded as an AVI file.
1
Turn the mode dial to 3.
2
Press the shutter release button to
start recording the movie.
3
• A blinking [ꢀ REC] icon, the recording time, and
the time available are displayed during
recording.
3
Press the shutter release button to finish recording the
movie.
Caution------------------------------------------------------------------------------------------
•
•
While shooting movies, operation sounds may be recorded.
The maximum recording time per shooting depends on the size of your SD memory
card (G P.96). Even if you are within the maximum recording time, recording may
end depending on your card.
•
•
The maximum recording time per shooting is 90 minutes or the equivalent of 4 GB.
The camera shake correction function does not work in movie mode. If you set the
mode dial to 3while the camera shake correction function is enabled, E
disappears from the picture display.
•
•
When shooting a fast-moving subject, the subject may be distorted in the recorded
image.
Flickering may be recorded as a horizontal band when shooting under fluorescent
lights.
94Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
•
•
The flash cannot be used.
While shooting movies, only digital zoom can be used (up to 4.0×). (G P.40)
When the shutter release button is pressed in Step 2, the camera focuses on the
subject.
•
The remaining recording time may not change uniformly because it is recalculated
from the remaining memory capacity during movie recording.
Use the shooting menu to set the image size and frame rate of movies.
The shooting menu items for movie mode differ from those in still image mode.
(G P.98)
•
•
•
•
Depending on the remaining battery level, the battery may become depleted during
movie shooting. Use of a battery with adequate remaining power is recommended.
Use of a high speed SD memory card with sufficient memory is recommended when
shooting for long periods.
3
Setting the Frame Rate
You can select the number of shot frames per second (frame rate)
in movie mode.
1
Turn the mode dial to 3.
2
Press the MENU button.
• The shooting menu is displayed.
3
4
5
Press the ADJ./OK button "to
select [Frame Rate] and press
the button $.
Press the button !"to select
[30 Frames/Sec] or [15 Frames/
Sec].
Press the ADJ./OK button.
• The setting appears on the screen.
Movie Frames---------------------------------------------------------------------------------
Movies consist of many frames whose images appear to be moving when displayed at
high speed.
Download from Www.Somanuals.com. All Manuals Search And Download.95
Note ----------------------------------------------------------------------------------------------
•
Movie recording time may vary depending on the capacity of the recording destination
(internal memory or SD memory card), shooting conditions, and the type and
manufacturer of the SD memory card.
•
The estimated total recording time is shown below. The maximum recording time per
shooting is 90 minutes or the equivalent of 4 GB.
Internal
Memory
1 GB
2 GB
4 GB
8 GB 16 GB 32 GB
640 × 480
1 min 18 min 37 min 76 min 149 min 299 min 601 min
(15 Frames/Sec)
42 s
20 s
9 min 18 min 38 min 75 min 151 min 303 min
15 s 49 s 41 s 31 s 18 s 31 s
4 min 46 min 94 min 193 min 378 min 757 min 1519 min
19 s 19 s 11 s 41 s 2 s 18 s 7 s
2 min 23 min 48 min 99 min 193 min 387 min 777 min
12 s 42 s 13 s 8 s 30 s 39 s 37 s
17 s
41 s
40 s
50 s
28 s
640 × 480
(30 Frames/Sec)
51 s
320 × 240
(15 Frames/Sec)
320 × 240
(30 Frames/Sec)
3
96Download from Www.Somanuals.com. All Manuals Search And Download.
4 Shooting Menu
About the Shooting Menu
Press the MENU button in shooting mode to display the shooting
menu. The shooting menu can be used to set the following shooting
settings.
Setting
Dynamic Range
Expansion
Options [Default Settings]
[AUTO], Very Weak, Weak, Medium, Strong
Refer to
P.84
Plus Normal Shooting
Picture Quality/Size
[Off], On
P.86
P.101
F3456(9M), [N3456(9M)], F3:2(8M), F1:1(6M),
N3072(7M), N2592(5M), N2048(3M), N1280(1M),
N640(VGA)
Movie Size
Frame Rate
Density
Size
[640], 320
P.101
P.95
P.82
P.101
P.103
[30 Frames/Sec], 15 Frames/Sec
Deep, [Normal], Light
[3456(9M)], 2048(3M)
4
Focus
[Multi AF], Spot AF, Continuous AF, Multi-trgt AF,
MF, Snap, A
Pre-AF
Exposure Metering
Image Settings
[Off], On
[Multi], Center, Spot
Vivid, [Standard], Cust. Settings, Black & White,
Sepia
P.107
P.108
P.109
Flash Exposure
Compensation
+2.0, +1.7, +1.3, +1.0, +0.7, +0.3, [0.0], -0.3, -0.7, P.111
-1.0, -1.3, -1.7, -2.0 (1/3EV increments)
Auto Bracket
Time Exposure
Custom Self-Timer
[Off], On, WB-BKT, CL-BKT, FOCUS-BKT
[Off], 1 second, 2 seconds, 4 seconds, 8 seconds
Pictures (1 to 10 pictures [2 Pics]),
Interval (5 to 10 seconds [5 Sec.])
P.112
P.117
P.118
Interval Shooting
Camera Shake Correction Off, [On]
Slow Shutter Limit
Date Imprint
[0 Sec.], 5 seconds to 1 hour
P.119
P.121
P.122
P.123
[Off], 1/2Sec., 1/4Sec., 1/8Sec.
[Off], Date, Date and Time
Exposure Compensation +2.0, +1.7, +1.3, +1.0, +0.7, +0.3, [0.0], -0.3, -0.7, P.124
-1.0, -1.3, -1.7, -2.0 (1/3EV increments)
White Balance
Auto, [Multi-P AUTO],
(Outdoors),
(Incandescent Lamp
(Fluorescent Lamp), (Manual Settings)
(Cloudy), P.126
(Incandescent Lamp),
2),
Download from Www.Somanuals.com. All Manuals Search And Download.97
Setting
Options [Default Settings]
Refer to
ISO Setting
[Auto], Auto-Hi, ISO 80, ISO 100, ISO 200, ISO 400, P.128
ISO 800, ISO 1600
Restore Defaults
P.130
Available Settings for Each Shooting Mode ---------------------------------------
T displayed items vary depending on the shooting mode. See the following table. Refer
to P.99 for more information on the items that can be set for each scene mode.
Setting
Picture Quality/Size
Movie Size
Frame Rate
Focus
Pre-AF
Density
Size
Exposure Metering
Image Settings
Flash Exposure Compensation
Auto Bracket
Dynamic Range Expansion
Plus Normal Shooting
Time Exposure
Custom Self-Timer
Interval Shooting
Camera Shake Correction
Slow Shutter Limit
Date Imprint
5
O
-
SCENE EASY
R
Q
3
-
O
-
O
-
O
-
-
O
-
-
O
O
O
O
-
-
-
-
O
O
-
O
O
O
O
O
O
O
O
-
-
-
-
O
O
-
O
O
-
-
-
-
-
-
-
-
O
O
O
O
-
O
O
-
O
O
-
4
-
-
-
-
-
-
-
-
-
-
-
-
O
O
-
-
-
-
-
-
-
O
O
O
O
O
O
O
O
O
O
O
O
-*
O
O
O
O
O
O
-*
-
-
-
-
-
-
-
O
O
O
-
O
O
O
-
-
-
-
-
O
-
O
O
O
O
O
-
-
-
-
Exposure Compensation
White Balance
ISO Setting
-
-
-
O
-
-
Restore Defaults
-
* [Discreet Mode] only.
98Download from Www.Somanuals.com. All Manuals Search And Download.
When Mode Dial is Set to SCENE------------------------------------------------------
When the mode dial is set to SCENE, the displayed items differ depending on the
selected scene mode. See the following table.
Setting
Refer to
Picture Quality/Size
Density
Size
Focus
Pre-AF
Exposure Metering
Image Settings
Flash Exposure Compensation O O
Auto Bracket
Time Exposure
Custom Self-Timer
Interval Shooting
Camera Shake Correction
Slow Shutter Limit
Date Imprint
O O O O O O O O O O O
-
O
O
-
P.101
P.82
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
P.101
P.103
P.107
P.108
P.109
P.111
P.112
P.117
P.118
P.119
O O
O O
-
-
O O O O O O O
O O O O O O O
-
-
-
-
-
-
-
-
-
-
-
-
O O
O O
-
-
-
-
O
O
O O O O O O O
-
-
-
-
4
-
-
-
-
-
-
O O
O O
-
-
-
-
-
-
-
-
-
O
-
O O O O O O O O O O
-
-
-
-
-
-
O
-
-
-
O O O O O O O O O O O O P.121
O O O O O O O O O O O O P.122
O O O O O O O O O O O O P.123
Exposure Compensation
White Balance
ISO Setting
O O O O O O O O O O O
-
-
-
-
P.124
P.126
P.128
P.130
-
O
-
O O O O O O O
-
-
-
O O
-
-
-
-
-
-
-
-
-
-
O O
-
-
O
-
Restore Defaults
O
-
O Available, - Not available
Note ----------------------------------------------------------------------------------------------
The setup menu can be accessed from within the shooting menu. (G P.165)
Download from Www.Somanuals.com. All Manuals Search And Download.99
Using the Menu
In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./
OK button” (as in Step 5 below), but you can also confirm the setting and return to the menu
screen by pressing the ADJ./OK button #.
1
Press the MENU button in
shooting mode.
• The shooting menu is displayed.
• In scene mode or continuous
mode, press the ADJ./OK button
!"#$to select the [MODE] tab,
and then press the ADJ./OK
button ". The shooting menu
appears.
Indicates the range of displayed
screens.
2
Press the ADJ./OK button
!"to select the desired menu
item.
4
• If the DISP. button is pressed at this
point, the cursor moves to the
shooting menu tab.
• Press the ADJ./OK button "at the
bottom item to display the next screen.
3
4
5
Press the ADJ./OK button $.
• The menu item settings are displayed.
Press the ADJ./OK button !"
to select the setting.
Press the ADJ./OK button.
• The setting is confirmed, the shooting
menu disappears and the camera is ready to shoot.
• Pressing the ADJ./OK button #in Step 5 confirms the setting and the
display returns to the screen shown in Step 2.
100Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Quality Mode/Image Size
The file size of a shot still image depends on the picture quality
mode and image size settings. For movies, choose the movie size.
Figures inside the bold frame indicate those shown on the screen.
Still Images
Image Size
Picture Quality Picture Quality/ Remarks
Mode
3456 × 2592 F (Fine)
N (Normal)
3456 × 2304 F (Fine)
2592 × 2592 F (Fine)
3072 × 2304 N (Normal)
2592 × 1944 N (Normal)
2048 × 1536 N (Normal)
Size
F3456(9M)
N3456(9M)
F3:2(8M)
F1:1(6M)
N3072(7M)
N2592(5M)
N2048(3M)
N1280(1M)
• For creating large prints.
• For downloading to a computer for
trimming and other processes.
• For creating prints.
1280 × 960
N (Normal)
• For shooting a large number of
pictures.
4
640 × 480
N (Normal)
N640(VGA)
• For shooting a large number of
pictures.
• For attaching to e-mail.
• For posting on a website.
• When scene mode is set to [Skew Correct Mode], you can select
1280 × 960 or 640 × 480.
• When scene mode is set to [Text Mode], you can select
3456 × 2592 or 2048 × 1536.
Movies
Image Size
640 × 480
320 × 240
Movie Size
640
320
• You can also choose the number of frames for movies. (G P.95)
Download from Www.Somanuals.com. All Manuals Search And Download.101
Note ----------------------------------------------------------------------------------------------
•
For picture quality mode, select normal mode (N) or fine mode (F), depending on the
desired compression ratio.
Normal mode:The compression ratio is high, resulting in a small file. Normally,
shooting is done in this mode.
Fine mode: The compression ratio is low, resulting in a large file, but the picture
quality is better than in Normal.
•
The number of images that can be stored in the internal memory or SD memory card
depends on the [Picture Quality/Size] setting. (G P.232)
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Check that [Picture Quality/
Size] is selected and press the
ADJ./OK button $.
4
3
Press the button !"to select
the desired setting.
Still Images
Movies
4
Press the ADJ./OK button.
• The setting appears on the screen.
102Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing Modes
If you shoot the subject in the default focusing mode, the camera
focuses automatically with Auto Focus (AF).
Select from the following 7 focusing modes.
Focusing Modes
Symbol Mode
Description
None
Multi AF
Measures the distances from 9 AF areas and focuses to
the nearest AF area. This prevents the center of the picture
display from becoming out of focus and enables you to
shoot with a minimum number of out-of-focus pictures.
None
Spot AF
Selects one AF area at the center of the picture display to
allow the camera to focus on this area automatically.
Continuous AF
Measures the distance from the center AF area and focuses
on the subject in the center area. If the subject moves while
the shutter-release button is pressed halfway, the camera
will track the subject while focusing continuously.
4
Multi-trgt AF
Takes 7 consecutive pictures while shifting the focus to
multiple positions. (G P.104)
MF (Manual Focus) Enables you to adjust the focus manually. (G P.105)
Snap
(Infinity)
Fixes the shooting distance to a short distance (approx.
2.5 m (8.2 ft.)).
Fixes the shooting distance to infinity.
A
Infinity is useful for shooting distant scenes.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Focus] and press the
button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
• If you select a setting other than [Multi AF] or [Spot AF], a symbol
appears on the screen.
Note ----------------------------------------------------------------------------------------------
•
If [Focus] is set to [Multi AF] when using the digital zoom, [Focus] functions according
to the [Spot AF] setting.
Download from Www.Somanuals.com. All Manuals Search And Download.103
•
[Continuous AF] is not available in dynamic range double shot mode.
Multi-Target AF
When you half-press the shutter release button, the camera
automatically determines multiple focus positions. When you then
press the shutter release button all the way down, the camera shifts
among the different focus positions, taking 7 consecutive pictures.
The 7 still images are grouped together as a set and are recorded
as an MP file.
This function is especially useful for telephoto shooting and
shooting with macro mode.
4
1
Turn the mode dial to 5.
2
Display the shooting menu.
• For information on using the menu, see P.100.
3
Press the ADJ./OK button "to
select [Focus] and press the
button $.
4
Press the button !"to select
[Multi-trgt AF] and then press
the ADJ./OK button.
• The symbol appears on the screen.
104Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Compose your picture and
half-press the shutter release
button.
• The camera automatically detects
multiple focus positions.
• The V symbol appears on the screen
when a focus position is detected.
• The determined focus positions are
displayed only during playback.
(G P.134)
• If the focus position cannot be detected, the V symbol blinks on the
screen.
Press the shutter release button all the way down.
• Consecutive shooting starts, and when the 7 frames are shot, they are
recorded as one MP file.
Caution------------------------------------------------------------------------------------------
•
•
•
•
This function is only available in auto shooting mode.
The flash cannot be used.
The [Time Exposure] setting is disabled. (G P.117)
The camera shake correction function cannot be used. If [Multi-trgt AF] is set while the
4
camera shake correction function is turned on, E changes to F
.
Note ----------------------------------------------------------------------------------------------
•
If this function is turned on when using the digital zoom, the digital zoom is disabled
and shooting is performed at the maximum magnification for the optical zoom (10.7×).
[White Balance] functions according to the [Auto] setting even if it is set to [Multi-P
AUTO].
•
MP file -------------------------------------------------------------------------------------------
MP is a file format for recording a set of still images.
Manual Focus (MF)
If the camera fails to focus automatically, you can focus manually
(MF: Manual Focus).
Manual focus enables shooting at a fixed distance.
1
Display the shooting menu.
• For information on using the menu, see P.100.
Download from Www.Somanuals.com. All Manuals Search And Download.105
2
Press the ADJ./OK button "
to select [Focus] and press
the button $.
3
4
Press the button !"to select
[MF].
Press the ADJ./OK button.
• [MF] and the focus bar are displayed
on the screen.
Hold
5
6
Press and hold the ADJ./OK button as required.
• Pressing and holding the ADJ./OK button increases the magnification
only at the center of the screen.
• Pressing and holding the ADJ./OK button again returns from enlarged
view to normal view.
4
Adjust the zoom position with the zoom lever as
required.
• The zoom bar is displayed only when operating the zoom lever.
7
Press the ADJ./OK button !"to adjust the focus.
• Pressing the ADJ./OK button !adjusts the focus to farther objects.
• Pressing the ADJ./OK button "adjusts the focus to closer objects.
8
Press the shutter release button to shoot the picture.
Note ----------------------------------------------------------------------------------------------
•
In scene mode, manual focus can be used when [Discreet Mode], [Zoom Macro], or
[Skew Correct Mode] is selected.
•
You can also use manual focus to focus on objects within the macro shooting range.
106Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-AF
If [On] is selected when [Multi AF], [Spot AF], [Continuous AF], or
[Multi-trgt AF] is selected for [Focus] (G P.103), the camera will
continue to focus even when the shutter-release button is not
pressed halfway. This may decrease the time needed to focus
when a picture is taken, potentially improving shutter response.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Pre-AF] and press the
button $.
3
4
Press the button !"to select
the desired setting.
4
Press the ADJ./OK button.
Caution------------------------------------------------------------------------------------------
Pre-AF is not available when [MF], [Snap], or [A ] is selected for [Focus].
Download from Www.Somanuals.com. All Manuals Search And Download.107
Exposure Metering Modes
You can change the metering method (the range to use for
metering) used to determine the exposure value.
There are three light metering modes.
Exposure Metering Modes
Symbol Mode
Description
(None)
Multi
The entire shooting range is divided into 256 partitions, and each is
metered to determine the overall exposure value.
Center
The entire image is metered, with emphasis on the center, to
determine the exposure value.
Use this when the brightness of the center and surroundings are different.
Spot
Only the center of the image is metered to determine the exposure value.
Use this setting when you want to use the brightness at the center.
This is useful if there is a marked difference in contrast or backlighting.
1
Display the shooting menu.
• For information on using the menu, see P.100.
4
2
Press the ADJ./OK button "
to select [Exposure Metering]
and press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
• If you select a setting other than
[Multi], a symbol appears on the
screen.
108Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Quality and Color
You can change the picture quality of an image, including the
contrast, sharpness, color and vividness.
You can select from the following picture quality settings.
Picture Quality Modes
Type
Vivid
Description
Take strong, vivid photos with higher contrast and sharpness and maximum
vividness.
Standard
Creates an image with normal picture quality.
Cust. Settings You can select from five [Contrast], [Sharpness], and [Vividness] levels.
(G P.110)
Black & White Creates a black and white picture.
Sepia
Creates a sepia-toned picture.
1
Display the shooting menu.
• For the operating procedure, see P.100.
4
2
Press the ADJ./OK button "
to select [Image Settings] and
press the button $.
3
4
Press the button !"to select
the desired picture quality.
• You can set values for [Cust.
Settings] (G P.110). If the values
are already set, you can set the picture quality by simply selecting
[Cust. Settings].
Press the ADJ./OK button.
• If you selected a setting other than
[Standard], the symbol appears on
the screen.
Note ----------------------------------------------------------------------------------------------
[Color], [Black & White], and [Sepia] can be selected in dynamic range double-shot
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.109
Custom Settings
1
Display the shooting menu.
• For the operating procedure, see P.100.
2
3
Press the ADJ./OK button "to select [Image Settings]
and press the button $.
Press the button !"to select [Cust. Settings] and
press the button $.
• The [Image Settings] screen appears.
• If the values are already set, you can set the picture quality by
selecting [Cust. Settings].
4
Press the ADJ./OK button !"
to select [Contrast],
[Sharpness], and [Vividness],
and press the button #$to
adjust the settings.
4
5
6
Press the ADJ./OK button.
• The [Cust. Settings] setting is saved,
and the display returns to the shooting menu.
Press the ADJ./OK button.
• The symbol appears on the screen.
110Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Exposure Compensation
You can adjust the light intensity of the flash. You can set the light
intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1
Display the shooting menu.
• For the operating procedure, see P.100.
2
Press the ADJ./OK button "to select [Flash Exposure
Compensation] and press the button $.
• The flash exposure compensation bar appears.
3
4
Press the button !"to make
the setting.
4
Press the ADJ./OK button.
• The setting appears on the screen
except when the flash mode is set to
[Flash Off].
Note ----------------------------------------------------------------------------------------------
For information on how to use the flash, see P.43.
Caution------------------------------------------------------------------------------------------
Flash exposure compensation may not work outside the flash range (G P.43).
Download from Www.Somanuals.com. All Manuals Search And Download.111
Bracket Shooting
Bracket shooting is the function for performing automatic
consecutive shooting while changing the exposure, white balance,
color, or focus position.
Note ----------------------------------------------------------------------------------------------
•
This function is not available in dynamic range double-shot mode, easy shooting
mode, and continuous mode.
•
•
•
•
Bracket shooting is not available when [Focus] is set to [Multi-trgt AF].
The flash cannot be used.
The [Time Exposure] setting is disabled. (G P.117)
Assigning [AT-BKT], [WB-BKT], [CL-BKT], or [FOCUS-BKT] to the Fn (Function)
button with [Set Fn Button] (G P.174) allows you to switch between on and off by
pressing the Fn button. (G P.66)
Auto Bracketing
When the auto bracketing function is set to [On], the camera
automatically shoots three consecutive shots at three exposure
levels (-0.5EV, ±0, and +0.5EV) based on the set exposure level.
4
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Auto Bracket] and
press the button $.
3
4
Press the button !"to select
[On].
Press the ADJ./OK button.
• The symbol appears on the screen.
112Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press the shutter release
button to shoot the picture.
• Three consecutive shots are taken at
±0, -0.5EV, and +0.5EV based on the
set exposure compensation setting.
When shooting is completed, three
still images are displayed on the
picture display. They are, from left to
right, at -0.5EV (darker), standard exposure compensation setting,
and +0.5EV (brighter).
Note ----------------------------------------------------------------------------------------------
•
•
The exposure compensation can be changed using the shooting menu. (G P.124)
[White Balance] functions according to the [Auto] setting even if it is set to [Multi-P
AUTO].
White Balance Bracketing
The white balance bracket function automatically records three
images - a reddish image, a bluish image, and an image of the
current white balance.
4
This is useful if you cannot determine the appropriate white
balance.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "
to select [Auto Bracket] and
press the button $.
3
4
Press the button !"to select
[WB-BKT].
Press the ADJ./OK button.
• The symbol appears on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.113
5
Press the shutter release
button to shoot the picture.
Recording
• Three images (a reddish image, an
image equal to the current white
balance, and a bluish image) are
automatically recorded.
Red
Blue
Note ----------------------------------------------------------------------------------------------
•
•
The white balance can be changed using the shooting menu. (G P.126)
If [Image Settings] is set to [Black & White] or [Sepia], the white balance bracket
function can be set but it does not operate.
Color Bracketing
With color bracketing, three images, a black-and-white, a color, and
a sepia image, are recorded.
1
Display the shooting menu.
• For information on using the menu, see P.100.
4
2
Press the ADJ./OK button "
to select [Auto Bracket] and
press the button $.
3
4
Press the button !"to select
[CL-BKT].
Press the ADJ./OK button.
• The symbol appears on the screen.
5
Press the shutter release
button to shoot the picture.
Recording
• Three images, a black-and-white, a
color, and a sepia image, are
recorded.
Black&White
Sepia
114Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast, Sharpness and Vividness During
Color Bracket Shooting -------------------------------------------------------------------
During color bracket shooting, the contrast, sharpness, and vividness values set in
[Image Settings] are applied. However, the values for [Standard] in [Image Settings]
apply when [Image Settings] is set to [Black & White] or [Sepia].
Focus Bracketing
Choose this option to automatically vary focus by a selected
amount over a series of five photographs.
1
Display the shooting menu.
• For the operating procedure, see P.100.
2
Press the ADJ./OK button "
to select [Auto Bracket] and
press the button $.
4
3
Press the button !"to select
[FOCUS-BKT] and press the
button $.
4
5
6
Press the ADJ./OK button #$to set the interval of the
focus position.
Press the ADJ./OK button.
• The symbol appears on the screen.
Half-press the shutter release
button.
• The camera focuses according to the
[Focus] setting.
7
Press the shutter release
button all the way down.
Recording
• The camera takes 5 consecutive
pictures based on the focus position
in Step 6.
FAR
NEAR
Download from Www.Somanuals.com. All Manuals Search And Download.115
Note ----------------------------------------------------------------------------------------------
•
•
•
When [Focus] is set to [MF], the first picture is taken at the set focus position without
being measured.
[White Balance] functions according to the [Auto] setting even if it is set to [Multi-P
AUTO].
Photographs are taken and recorded in the following order:
Focus position
Shooting order
Recording order
Fore
2
1
Center *
1
3
Back
5
5
3
2
4
4
*Focus set using the option currently selected for [Focus] (G P.103).
4
116Download from Www.Somanuals.com. All Manuals Search And Download.
Long Time Exposure
You can select [1 second], [2 seconds], [4 seconds], or [8 seconds]
for time exposure.
By using long time exposure, you can capture the movement of
moving subjects such as the trail of fireworks and car lights when
shooting a night scene.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Time Exposure] and
press the button $.
3
4
Press the button !"to select
the desired setting.
4
Press the ADJ./OK button.
• The setting appears on the screen.
1 Sec
Note ----------------------------------------------------------------------------------------------
•
When using long time exposure, the shutter speed may slow down and images may
be blurred. Hold the camera steady by using a tripod when shooting.
•
The camera shake correction function cannot be used when using long time
exposure. If long time exposure is set while the camera shake correction function is
turned on, E changes to F
.
•
•
While shooting with long time exposure, the picture display turns off.
This function is not available for bracket shooting, multi-target AF, dynamic range
double-shot, easy shooting mode, or continuous mode.
•
•
Long time-exposures are processed to reduce noise. The time required for processing
is roughly equivalent to the exposure time.
The maximum ISO sensitivity for long time-exposures is ISO 400. If the value
currently selected by the user is between ISO 800 and ISO 1600, the camera will
automatically set ISO sensitivity to ISO 400 (G P.128).
Download from Www.Somanuals.com. All Manuals Search And Download.117
Shooting Several Pictures with the
Custom Self-Timer
Set the shooting interval and the number of pictures as indicated
below when you want to shoot several pictures with the self-timer.
Available Setting
Pictures
Interval
Description
Set this between 1 and 10 pictures. The default setting is [2 Pics].
Set this between 5 and 10 seconds. The default setting is [5 Sec.].
1
Display the shooting menu.
• For the operating procedure, see P.100.
2
Press the ADJ./OK button "to select [Custom Self-
Timer] and press the button $.
• The setting screen appears.
3
4
Press the button #$to select
[Pictures] and [Interval], and
press the button !"to make
the settings.
4
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
After setting [Custom Self-Timer], with the camera ready to shoot, press the t(Self-
Timer) button and change the self-timer setting to [Custom]. For information on how to
shoot with this function, see P.45.
118Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Pictures Automatically at
Set Intervals
You can set the camera to automatically take pictures at fixed
intervals.
You can set the shooting interval from 5 seconds to 1 hour in
increments of 5 seconds.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Interval Shooting] and
press the button $.
4
3
4
Press the button !"to set the
hours.
• To cancel interval shooting, press the
DISP. button to return to the shooting
menu.
Press the button $to move to
the minutes setting, then press
the button !"to set the minutes.
• You can press and hold the button !"to quickly raise or lower the
minute setting.
5
6
7
Press the button $to move to the seconds setting, then
press the button !"to set the seconds.
Press the ADJ./OK button.
Interval
• [Interval] appears on the screen.
Press the shutter release
button to shoot the picture.
Stop
• A picture is taken every time the fixed
interval elapses.
8
To stop shooting, press the MENU button.
Download from Www.Somanuals.com. All Manuals Search And Download.119
Caution------------------------------------------------------------------------------------------
•
•
The interval shooting setting is cleared when the camera is turned off.
The time until the next picture can be taken according to the shooting menu setting
may be longer than the time set for interval shooting. In this case, the shooting interval
becomes longer than the set time.
Note ----------------------------------------------------------------------------------------------
•
•
Interval shooting is not available when [Focus] is set to [Multi-trgt AF].
Depending on the remaining battery level, the battery may become depleted during
movie shooting. Use of a battery with adequate remaining power is recommended.
If you press the shutter release button during interval shooting, the camera shoots as
usual. However, the interval shooting setting is unaffected. After shooting, once the
time specified in interval shooting elapses, the next shot is taken.
A high speed memory card or a SD memory card with sufficient memory is
recommended.
•
•
•
When Interval is set, the self-timer setting is disabled.
4
120Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Shake Correction
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "
to select [Camera Shake
Correction] and press the
button $.
3
4
Press the button !"to select
[On].
Press the ADJ./OK button.
• The symbol appears on the screen.
4
Caution------------------------------------------------------------------------------------------
•
The camera shake correction function is not available for movie mode, continuous
mode, multi-target AF and long time exposure. If multi-target AF, or long time
exposure is set while the camera shake correction function is turned on, E
changes to F . E disappears when the mode dial is set to 3or R
.
•
•
The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (G P.33)
Download from Www.Somanuals.com. All Manuals Search And Download.121
Limiting the Shutter Speed
The maximum shutter speed can be limited to the following:
1/8 second, 1/4 second, and 1/2 second.
When this function is set to [Off], the maximum shutter speed varies
depending on the ISO setting.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Slow Shutter Limit] and
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
4
Note ----------------------------------------------------------------------------------------------
•
•
When time exposure is set, priority is given to time exposure.
When scene mode is set to [Nightscape] or [Night. Port.], the maximum shutter speed
for [Nightscape] or [Night. Port.] is given priority.
•
•
When the flash is set to [Flash Synchro.], the longest shutter speed is one second.
When using the slow shutter limit, the light quantity may be insufficient depending on
the brightness of the subject, resulting in a dark image. In this case, try the following:
•
•
•
Selecting a greater slow shutter limit.
Raising the ISO setting. (G P.128)
Using the flash. (G P.43)
122Download from Www.Somanuals.com. All Manuals Search And Download.
Imprinting the Date on Images
You can insert the date (YY/MM/DD) or the date and time (YY/MM/
DD hh:mm) at the lower right of a still image.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "
to select [Date Imprint] and
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
• The symbol appears on the screen.
4
Note ----------------------------------------------------------------------------------------------
•
•
•
Make the date and time settings in advance. (G P.194)
[Date Imprint] cannot be used with movies.
The date imprinted in an image cannot be deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.123
Exposure Compensation
The exposure setting enables you to select the brightness level for
your picture. Normally, if your subject is centered, backlight
compensation is automatically activated, and you can shoot with
the correct exposure.
In the following cases, or when you intentionally want to change the
exposure, you can adjust the exposure setting. Exposure can be
specified in the range from -2.0 to +2.0. Setting the level higher (+)
makes the picture brighter and lower (-) makes the picture darker.
For backlighting
When the background is particularly bright, the subject will appear dark
(underexposed). In this case, set the exposure level higher (+).
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure level
higher (+).
4
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure level
lower (-).
The same happens when you take a photo of a subject in a spotlight.
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see “Using the Menu” (G P.100).
1
Press the ADJ./OK button in shooting mode.
2
Press the ADJ./OK button #$until the exposure
compensation bar appears.
3
4
Press the button !"to set the exposure value.
• You can also press the shutter release button to take a picture.
Press the ADJ./OK button.
• The setting appears on the screen.
124Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
If the subject is very bright or very dark, [!AE] will be displayed and exposure compensation
will not be available.
4
Download from Www.Somanuals.com. All Manuals Search And Download.125
White Balance
Adjust the white balance so that a white subject will appear white.
At purchase, the white balance mode is set to [Multi-P AUTO].
Change the setting in situations where the white balance is difficult
to adjust effectively, such as when shooting an object of a single
color or when shooting under multiple light sources.
White Balance Modes
Symbol Mode
Description
AUTO
Auto
Multi-P AUTO
Adjusts the white balance automatically.
The camera automatically selects the optimal white balance
according to the conditions of sun and shade or the flash
illumination range.
Outdoors
Cloudy
Select this when shooting outdoors (sunny) and white
balance fails to adjust properly.
Select this when shooting in cloudy weather or shade and the
white balance fails to adjust properly.
4
Incandescent
Lamp
Select this when shooting under incandescent light and white
balance fails to adjust properly.
Incandescent
Lamp 2
Select this when shooting under incandescent light (more
reddish, compared with [Incandescent Lamp]).
Fluorescent Lamp Select this when shooting under fluorescent light and white
balance fails to adjust properly.
Manual Settings Adjust the white balance manually. (G P.127)
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see “Using the Menu” (G P.100).
1
Press the ADJ./OK button in shooting mode.
2
3
4
Press the ADJ./OK button #$until the white balance
menu appears.
Press the button !"to select a setting other than [M].
• You can also press the shutter release button to take a picture.
Press the ADJ./OK button.
• The symbol appears on the screen.
126Download from Www.Somanuals.com. All Manuals Search And Download.
Caution------------------------------------------------------------------------------------------
•
White balance is not available when [Black & White] or [Sepia] is selected for [Image
Settings] or when [Portrait], [High Contrast B&W] or [Text Mode] is selected in scene
mode.
•
[Multi-P AUTO] is not available in continuous mode and movie mode.
Note ----------------------------------------------------------------------------------------------
•
The white balance may not be adjusted correctly for a subject that is mostly dark. In
this case, add something white to the subject.
•
When shooting with the flash, the white balance may not be adjusted correctly if
[AUTO] is not selected. In this case, switch to [AUTO] to shoot with the flash.
Manual Settings
1
Press the ADJ./OK button in shooting mode.
2
3
4
Press the ADJ./OK button #$until the white balance
menu appears.
4
Press the button !"to select
[M].
Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5
6
Press the DISP. button.
• The white balance is set.
Press the ADJ./OK button.
• The symbol appears on the screen.
• The screen is displayed with the
white balance set in Step 5. If the
result is not as expected, repeat the
steps to change the settings as many
times as required.
Note ----------------------------------------------------------------------------------------------
To cancel [Manual Settings], select a setting other than [M] in Step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.127
ISO Sensitivity
ISO sensitivity indicates how sensitive film is to light. A greater
value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or a fast-moving object while
minimizing blurring.
You can select from the following ISO settings:
Auto, Auto-Hi, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, and
ISO 1600.
When ISO setting is set to [Auto], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro settings, and picture quality/size. Usually, use the camera in
the [Auto] mode.
When the ISO setting is set to [Auto-Hi] (auto high sensitivity), the
sensitivity is automatically set according to the shooting conditions
but a higher upper limit than in [Auto] can be set. When shooting a
dark subject, the shutter speed set in [Auto-Hi] is faster than in
[Auto], which may reduce camera shake or blurring of the subject.
The maximum ISO setting for [Auto-Hi] is specified in the setup
menu. (G P.178)
4
If you do not want to allow the camera to change the ISO sensitivity,
select an ISO setting other than [Auto] or [Auto-Hi].
To change the setting, use the shooting menu or the ADJ./OK button. This section explains
easy ways to change the setting with the ADJ./OK button.
To use the shooting menu, see “Using the Menu” (G P.100).
1
Press the ADJ./OK button in shooting mode.
2
Press the ADJ./OK button #$until the ISO setting
menu appears.
3
4
Press the button !"to select the setting.
Press the ADJ./OK button.
• The setting appears on the screen.
128Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
When the ISO setting is set to [Auto], the maximum sensitivity is equivalent to ISO 800
if the flash is used. When the ISO setting is [Auto] and the flash is not fired, the ISO
setting is between 80 and 200.
•
•
Images shot with a higher sensitivity may appear grainy.
When the ISO sensitivity is set to [Auto] or [Auto-Hi], the ISO sensitivity that displays
when half-pressing the shutter release button may differ from the actual ISO
sensitivity in some cases (when using the flash, etc.).
4
Download from Www.Somanuals.com. All Manuals Search And Download.129
Restoring the Shooting Menu
Settings to their Defaults
To return the shooting menu settings to their defaults, follow the
steps below.
1
Display the shooting menu.
• For information on using the menu, see P.100.
2
Press the ADJ./OK button "to
select [Restore Defaults] and
press the button $.
• A confirmation message appears.
3
Make sure that [Yes] is
selected, and then press the
ADJ./OK button.
4
• The display indicates the camera is restoring the initial settings. Once
it is finished, the display returns to the shooting mode screen.
Note ----------------------------------------------------------------------------------------------
For a list of functions whose settings are saved when the camera is turned off, see
“Appendices”. (G P.234)
130Download from Www.Somanuals.com. All Manuals Search And Download.
5 Playback Functions
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
Playing Back Movies
To play back movies, follow the steps below.
1
Press the 6(Playback) button.
• The last movie shot is displayed.
• The first frame of the movie is displayed as a still image.
2
Press the ADJ./OK button
!"#$to select the movie you
want to view.
• Press the button $to display the next
file.
5
• Press the button #to display the
Start
previous file.
• Press the button !to display the file
10 frames forward.
• Press the button "to display the file 10 frames backward.
3
Press the ADJ./OK button.
• Playback begins.
The elapsed playback indicator or the elapsed time is displayed on the
screen.
Fast Forward
Rewind
Pause/Playback
Slow Playback
Slow Rewind
Next Frame
Turn the zoom lever toward zduring playback.
Turn the zoom lever toward Zduring playback.
Press the ADJ./OK button.
Turn and hold the zoom lever toward zduring pause.
Turn and hold the zoom lever toward Zduring pause.
Turn the zoom lever toward zduring pause.
Turn the zoom lever toward Zduring pause.
Press the ADJ./OK button !"during playback.
Previous Frame
Volume Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.131
Playing Back MP Files
When you shoot one still image with M-Cont Plus, Speed Cont, or
Multi-trgt AF, the image is recorded as one MP file. Use the
following method to play back MP files.
Note ----------------------------------------------------------------------------------------------
•
Images shot in normal continuous mode can be played back in the same way as
normal still images.
•
The focus position is displayed for multi-target AF shooting.
1
Press the 6(Playback) button.
2
Press the ADJ./OK button
!"#$to display the MP file
you want to play back.
• The MP file is displayed with the S
symbol.
5
3
The display changes as follows.
Display for Step 2
• Press the DISP. button to change between “Normal” and
“No Display”.
• The images cannot be enlarged even if the zoom lever is
turned toward 8(Enlarged View). The images are
displayed in thumbnail view.
• The other operations are the same as those for normal still
images.
8
9
ADJ./OK
Thumbnail view
• The MP file images are displayed in thumbnail view.
• Press the ADJ./OK button !"#$to select a frame.
• The DISP. button is disabled.
8
9
ADJ./OK
132Download from Www.Somanuals.com. All Manuals Search And Download.
Single frame view
• This displays the frame selected on the thumbnail view.
• Turn the zoom lever toward 8(Enlarged View) to display
enlarged view.
ADJ./OK
Slide Show
• Images are displayed automatically in the order they were
consecutively shot, starting with the displayed frame.
Stop
• The operations during slide show are shown below.
Pause/Playback
Fast Forward
Rewind
Slow Playback
Slow Rewind
Next Frame
Previous Frame
First Frame
Press the ADJ./OK button.
Turn and hold the zoom lever toward zduring playback.
Turn and hold the zoom lever toward Zduring playback.
Turn and hold the zoom lever toward zduring pause.
Turn and hold the zoom lever toward Zduring pause.
Turn the zoom lever toward zduring pause.
Turn the zoom lever toward Zduring pause.
Press the ADJ./OK button #.
5
Last Frame
Press the ADJ./OK button $.
4
To play back files other than MP files, return to Step 2
and press the ADJ./OK button !"#$.
Caution------------------------------------------------------------------------------------------
•
The [DPOF], [Trim], [Resize], [Skew Correction] (playback mode), [Level
Compensation], and [White Balance Compensation] functions are not available for
MP files.
•
[Flag Function Setting] and [Protect] cannot be set for individual frames in an MP file.
If [Flag Function Setting] or [Protect] is set when the thumbnail view or single image
view is displayed, the setting will be applied to the MP file instead of an individual
frame.
•
The individual images in a MP file can not be deleted separately.
MP file -------------------------------------------------------------------------------------------
MP is a file format for recording a set of still images.
Download from Www.Somanuals.com. All Manuals Search And Download.133
Exporting MP Files
You can extract specific frames from an MP file shot using M-Cont
Plus, Speed Cont, or Multi-trgt AF and save each frame as an
individual still image.
Note ----------------------------------------------------------------------------------------------
•
•
•
The images are saved in the same sizes used for shooting.
The original files will be retained after extraction.
The focus positions for images shot using multi-target AF will not be displayed on
extracted images.
1
Press the 6(Playback) button.
2
Press the ADJ./OK button
!"#$to display the MP file
you want to export.
• The MP file is displayed with the S
symbol.
• To export multiple frames, you can
also turn the zoom lever toward 8
(Enlarged View) to display thumbnail
view, and then go to Step 3.
5
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Export Still Images] and
then press the button $.
134Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting One Frame
5
Press the button !"to select
[1 Frame].
• Press the button #$to select the
frame.
6
Press the ADJ./OK button.
Specifying Multiple Frames Separately
5
Press the button !"to select
[Sel Mult] and then press the
ADJ./OK button.
• If thumbnail view was displayed in
Step 2 on P.134, skip Step 5.
6
7
Press the button !"to select
[Sel. Indiv.] and then press the
ADJ./OK button.
5
Press the button !"#$to select the frame and then
press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a range
of frames. See Step 7 and beyond on P.136.
8
9
Repeat Step 7 to select all the frames.
• If you selected a frame by mistake, you can deselect it by selecting the
frame and pressing the ADJ./OK button.
Press the Fn (Function) button.
10 Press the ADJ./OK button #$to select [Yes] and then
press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.135
Specifying a Range of Multiple Frames
5
Press the button !"to select
[Sel Mult] and then press the
ADJ./OK button.
• If thumbnail view was displayed in
Step 2 on P.134, skip Step 5.
6
7
Press the button !"to select
[Sel. Range] and then press the
ADJ./OK button.
Press the button !"#$to select the starting point for
the range of frames you want to specify and press the
ADJ./OK button.
• If you make a mistake when selecting the starting point for the range
of frames, press the ADJ./OK button to return to the screen for
selecting the starting point.
• Press the MENU button to switch to the display for specifying frames
separately. See Step 7 and beyond on P.135.
8
9
Press the button !"#$to
5
Export Still Images
select the ending point for the
range of frames you want to
specify and press the ADJ./OK
button.
Start
Cancel
Repeat Steps 7 and 8 to specify
all ranges.
10 Press the Fn (Function) button.
11 Press the ADJ./OK button #$to select [Yes] and then
press the ADJ./OK button.
136Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting All Frames
5
Press the button !"to select
[All Frames] and press the
button $.
6
Press the button #$to select
[Yes] and then press the ADJ./
OK button.
5
Download from Www.Somanuals.com. All Manuals Search And Download.137
6 Playback Menu
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
About the Playback Menu
Press the MENU button in playback mode to display the playback
menu. The playback menu allows you to make the settings for the
following functions.
Setting
Options
Refer to
P.140
P.142
P.134
P.143
P.144
P.147
P.150
Flag Function Setting
Flag Function Display
Export Still Images
Resize
Cancel, 1 Frame, Sel Mult, All Frames
1280, 640
Trim
Level Compensation
White Balance
Compensation
Auto, Manual
6
Skew Correction
Protect
Slide Show
Copy to Card from Internal
Memory
DPOF
P.152
P.154
P.157
P.158
Cancel, 1 File, Sel Mult, Select All, Cancel All
Cancel, 1 File, Select All, Cancel All
P.159
P.162
Recover File
Note ----------------------------------------------------------------------------------------------
The setup menu can be accessed from within the playback menu. (G P.165)
138Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu
1
Press the 6(Playback) button to select the playback
mode.
2
Press the MENU button.
• The playback menu appears.
Indicates the range of displayed
screens.
3
4
Press the ADJ./OK button !"
to select the desired item.
• If the DISP. button is pressed at this
point, the cursor moves to the
playback menu tab.
• Press the ADJ./OK button "at the
bottom item to display the next screen.
Press the ADJ./OK button $.
• The screen for the selected menu item appears.
6
Download from Www.Somanuals.com. All Manuals Search And Download.139
Saving Images You Want to Quickly
Display (Flag Function Setting)
You can set useful image files, such as a train time table or a map,
to [Flag Function Setting], and then press the Fn (Function) button
during playback to easily display these files whenever you like. Up
to 20 files can be saved with [Flag Function Setting].
Setting/Canceling One File at a Time
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the file you
want to set or cancel.
3
4
Press the MENU button.
• The playback menu appears.
Check that [Flag Function
Setting] is selected and press
the ADJ./OK button $.
• The [Flag Function Setting] screen
appears.
6
5
Make sure that [Set] is selected
to save a file or [Cancel] is
selected to cancel a file, and then press the ADJ./OK
button.
• When a file is set, the symbol appears on the screen.
• If 20 files have already been set, no more files can be set.
Note ----------------------------------------------------------------------------------------------
If an enlarged still image is set, the magnification ratio and magnified area are saved and
the enlarged image can be displayed as is.
140Download from Www.Somanuals.com. All Manuals Search And Download.
Setting/Canceling Multiple Files at One Time
1
Press the 6(Playback) button.
2
3
4
5
Turn the zoom lever toward 9(Thumbnail View).
• The screen is divided into 20 frames and thumbnails are displayed.
Press the ADJ./OK button !"#$to select the first file
you want to set or cancel.
Press the MENU button.
• The playback menu appears.
Check that [Flag Function Setting] is selected and
press the ADJ./OK button $.
• When a file is set, the symbol appears
Flag FFunctiion Seettting
on the file.
• If 20 files have already been set, no
more files can be set.
6
Press the button !"#$to
select the next file you want to
Finish
Sel/Cancel
set or cancel and press the
ADJ./OK button.
6
7
Repeat Step 6 to select all the files you want to set or
cancel.
• If you selected a file by mistake, select the file and press the ADJ./OK
button again.
8
Press the DISP. button.
Caution------------------------------------------------------------------------------------------
•
•
•
If the name of the file set to [Flag Function Setting] is changed using a computer, the
file is canceled from [Flag Function Setting].
When the contents of the internal memory are copied to an SD memory card, the files
set to [Flag Function Setting] in the internal memory are canceled.
When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO] folder
and CLIP.CLI file are created on the SD memory card. If these are deleted, the
corresponding file is canceled from [Flag Function Setting].
•
•
If the name of an image file is changed using a computer, the file may not be able to
be set to [Flag Function Setting].
Only images taken using this camera can be set to [Flag Function Setting].
Download from Www.Somanuals.com. All Manuals Search And Download.141
Displaying an Image Set to Flag
Function Setting
(Flag Function Display)
1
Press the 6(Playback) button.
2
Press the Fn (Function) button,
or select [Flag Function
Display] from the playback
menu, and press the ADJ./OK
button $.
• The file set to [Flag Function Setting]
with the smallest file number is
displayed.
• You can use the zoom lever to change the size of still images. You can
also press the ADJ./OK button !"#$to move the displayed image.
Changes to the magnification ratio and magnified area are saved, and
the image is displayed as is the next time.
• You can press the shutter release button or the 6button to switch to
shooting mode.
• If no files are set to [Flag Function Setting], a message appears and
you are returned to the playback menu.
3
Press the Fn button as required.
• If multiple files are set to [Flag Function Setting], pressing the Fn
button displays the image with the smallest file number.
6
Note ----------------------------------------------------------------------------------------------
When a file set to [Flag Function Setting] is displayed at normal magnification, pressing
the ADJ./OK button !"#$displays the previous or next image.
142Download from Www.Somanuals.com. All Manuals Search And Download.
Resizing Images
You can reduce the image size of a shot still image to create a new
file with a different image size.
Original
F3456/N3456/F3:2/F1:1/N3072/N2592/N2048/N1728 N1280
N1280 N640
Resized
N640
Caution------------------------------------------------------------------------------------------
You can resize only still images. Movies or MP files cannot be resized.
Note ----------------------------------------------------------------------------------------------
•
The ratio of width to height of [F3:2] images is 3:2. When an image of this type is
resized, it is reduced to a 4:3 image with black borders at the top and bottom.
In [F1:1] images, the height and width are the same. When an image of this type is
resized, it is reduced to a 4:3 image with black borders added on the left and right
sides.
•
•
You can also change the image size during shooting. (G P.101)
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the file
with the image size you want to change.
6
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Resize] and press the
button $.
5
6
Press the button !"to select
[1280] or [640].
Press the ADJ./OK button.
• The display indicates that the image is
being resized, and then the resized
image is recorded. The original image
remains unchanged.
Download from Www.Somanuals.com. All Manuals Search And Download.143
Trimming Images
This function allows you to trim a still image you have shot and then
save it as a separate file.
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the file you
want to trim.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to select [Trim] and press the
button
$.
• The [Trim] screen appears.
• To cancel trimming, press the DISP. button.
5
Turn the zoom lever toward 8
or 9to set the size of the
trimming frame.
• Pressing the Fn (Function) button at
this point displays the screen for
describing the operating procedure.
Pressing the Fn button again returns
the display to the previous screen.
6
• Press the Dbutton to choose between aspect ratios of 4 : 3 and 1 : 1.
6
7
Press the ADJ./OK button !"#$to set the position of
the trimming frame.
Press the ADJ./OK button.
•
The trimmed image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
•
•
•
You can only trim still images shot using this camera.
You cannot trim movies or MP files.
With the exception of images with an aspect ratio of 1 : 1 and a size, after cropping,
of 2592 x 2592, images can be cropped repeatedly. The compression applied when
a copy is saved results in a drop in image quality.
144Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
•
If an image is trimmed, the compression ratio changes to Normal.
The available settings for the trimming frame size differ depending on the original image
size. Each time you turn the zoom lever toward 8, the trimming frame decreases in size
by one level. You can decrease the frame size through 13 levels down to the smallest size.
The size of the image after cropping depends on the size of the original and the size
of the crop (the first crop shown in the trimming display is the second largest crop; to
display the largest crop, select 9with the zoom lever).
•
Aspect ratio 4:3
Original image size
Trimming level
1
Trimmed image size
3072 × 2304
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2, 3
3456 × 2592
4, 5
6 to 9
10 to 13
1
3072 × 2304
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2
3456 × 2304
3 to 5
6 to 9
10 to 13
1
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2 to 4
5 to 8
9 to 12
1, 2
2592 × 2592
3072 × 2304
2592 × 1944
6
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
3, 4
5 to 8
9 to 12
1
2592 × 1944
2048 × 1536
1280 × 960
640 × 480
2, 3
4 to 7
8 to 12
1, 2
2048 × 1536
1280 × 960
640 × 480
2048 × 1536
3 to 6
7 to 10
1
1728 × 1296
1280 × 960
640 × 480
1728 × 1296
2 to 5
6 to 9
1 to 3
4 to 8
1 to 4
1280 × 960
640 × 480
1280 × 960
640 × 480
640 × 480
Download from Www.Somanuals.com. All Manuals Search And Download.145
Aspect ratio 1:1
Original image size
Trimming level
1
Trimmed image size
2592 × 2592
2304 × 2304
1536 × 1536
960 × 960
2
3456 × 2592
3 to 5
6 to 9
10 to 13
1, 2
480 × 480
2304 × 2304
1536 × 1536
960 × 960
3, 4
3456 × 2304
5 to 9
10 to 12
1, 2
480 × 480
2592 × 2592
1536 × 1536
960 × 960
3 to 5
6 to 9
10 to 12
1, 2
2592 × 2592
480 × 480
2304 × 2304
1536 × 1536
960 × 960
3, 4
3072 × 2304
5 to 8
9 to 12
1 to 3
4 to 7
8 to 11
1, 2
480 × 480
1536 × 1536
960 × 960
2592 × 1944
480 × 480
1536 × 1536
960 × 960
2048 × 1536
3 to 6
7 to 10
1 to 4
5 to 8
1 to 3
4 to 8
1 to 4
6
480 × 480
960 × 960
1728 × 1296
480 × 480
960 × 960
1280 × 960
480 × 480
640 × 480
480 × 480
146Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting the Image Brightness and
Contrast
You can use either [Auto] or [Manual] mode to correct the
brightness and contrast in still images you have shot and then
record the corrected images. [Manual] mode allows you to correct
the image by adjusting the histogram.
Note ----------------------------------------------------------------------------------------------
See P.60 for more information on the histogram display.
1
2
Press the 6(Playback) button.
Press the ADJ./OK button !"#$to display the file you
want to correct.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Level Compensation]
and press the button $.
6
Correcting Images Automatically
5
Press the ADJ./OK button !"to select [Auto] and
press the button $.
• The original image appears at the
Level Compensation [Auto]
upper left of the screen and the
corrected image is shown on the right.
• If you select a file that cannot use level
compensation, an error message
appears and you are returned to the
playback menu.
• To cancel level compensation, press
Cancel
Ok
the DISP. button.
6
Press the ADJ./OK button.
• Messages appear during the correction process, and then the
corrected image is recorded. The original image remains unchanged.
Download from Www.Somanuals.com. All Manuals Search And Download.147
Correcting Images Manually
5
Press the ADJ./OK button !"to select [Manual] and
press the button $.
• The original image appears at the upper left of the screen, the
histogram is at the lower left, and the corrected image is shown on the
right.
• If you select a file that cannot use level compensation, an error
message appears and you are returned to the playback menu.
• To cancel level compensation, press the DISP. button.
6
Press the MENU button to
switch between points on the
histogram.
Level Compensation [Manual]
Help
Chng. Points
• A histogram shows the number of
pixels on the vertical axis and the
brightness on the horizontal axis,
ranging from shadows (dark areas) on
the left through midtones to highlights
(bright areas) on the right. Each time
you press the MENU button, the
Cancel
Ok
Points
selected point switches from the left point, to the middle point and then
to the right point.
• Pressing the Fn (Function) button at this point displays the screen for
describing the operating procedure. Pressing the Fn button again
returns the display to the previous screen.
6
7
Press the ADJ./OK button #$to correct the image by
adjusting the location of the selected point.
• Moving the left or right point moves the middle point also.
148Download from Www.Somanuals.com. All Manuals Search And Download.
Sample correction methods -------------------------------------------------------------
• Example 1)
To adjust the overall image brightness:
Select the middle point and move it to the
left to brighten the entire image.
Selecting the middle point and moving it to
the right darkens the entire image.
• Example 2)
To correct an overexposed or
underexposed image:
If the image in overexposed, move the left
point to the right so that it is aligned with
the left end of the histogram peaks.
If the image in underexposed, move the
right point to the left so that it is aligned with
the right end of the histogram peaks.
You can then adjust the overall image
brightness by moving the middle point left
or right.
Overexposed image
• Example 3)
To boost the contrast in an image:
If an image is lacking in contrast, the
histogram peaks are concentrated toward
to the center. By aligning the left and right
points with the respective ends of the
histogram peaks, you can create an image
with clearly defined bright and dark areas.
You can then adjust the overall image
brightness by moving the middle point left
or right.
6
8
Press the ADJ./OK button.
• Messages appear during the correction process, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
•
•
•
You can only use level compensation for still images shot using this camera.
You cannot use level compensation for movies or MP files.
This function may not have any effect for images shot using [Text Mode] in scene
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].
While you can use level compensation repeatedly, the image is recompressed each
time and there will be some decline in image quality.
•
Download from Www.Somanuals.com. All Manuals Search And Download.149
Correcting the White Balance
This function allows you to correct the green, magenta, blue and
amber color tones in still images you have taken and then record
the corrected images.
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the file you
want to correct.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button " to
select [White Balance
Compensation] and press the
button $.
• The original image appears at the
upper left of the screen, the white
balance compensation map is at the
lower left, and the corrected image is
shown on the right.
• If you select a file that cannot use white balance compensation, an
error message appears and you are returned to the playback menu.
6
5
Press the button !"#$to
Help
White Balance Compensation
move the point around the
white balance compensation
map and adjust the color
tones.
• Press the button !"#$to move the
point around the white balance
Cancel
Ok
compensation map. [G] denotes
green, [A] denotes amber, [M] denotes magenta and [B] denotes blue,
and the color tones change toward the respective colors depending on
the location of the point.
•
To cancel white balance compensation, press the DISP. button.
• Press the Dbutton to reset the color tone while correcting.
• Pressing the Fn (Function) button at this point displays the screen for
describing the operating procedure. Pressing the Fn button again
returns the display to the previous screen.
150Download from Www.Somanuals.com. All Manuals Search And Download.
6
Press the ADJ./OK button.
• Messages appear during the correction process, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
•
•
•
You can only use white balance compensation for still images shot using this camera.
You cannot correct the white balance for movies or MP files.
This function may not have any effect for images shot using [Text Mode] in scene
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].
While you can use white balance compensation repeatedly, the image is
recompressed each time and there will be some decline in image quality.
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.151
Correcting Skewed Images
You can straighten rectangular objects, such as a message board
or business card, shot at an angle, to make them look as if they
were shot squarely.
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the file you
want to straighten.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Skew Correction] and
press the button $.
• The display indicates that the image is
being processed, and then the area
recognized as the correction range is
displayed with an orange frame. Up to
five areas can be recognized.
• If the target area cannot be detected, an error message appears. The
original image remains unchanged.
• To select another correction area, move the orange frame to the target
area by pressing the ADJ./OK button $.
6
• To cancel skew correction, press the ADJ./OK button !. Even if you
cancel skew correction, the original image remains unchanged.
5
Press the ADJ./OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------
•
•
You can use skew correction for still images shot with this camera.
You cannot use skew correction for movies or MP files.
152Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
•
The image size does not change for skew corrected images.
If the image size is large, skew correction will take time. Resize the image (G P.143)
before performing skew correction to speed up the process.
•
The following table shows the approximate time required for skew correction.
Image Size
3456 × 2592
3072 × 2304
2592 × 1944
2048 × 1536
1728 × 1296
1280 × 960
640 × 480
Correction time
Approx. 20 seconds
Approx. 15 seconds
Approx. 12 seconds
Approx. 8 seconds
Approx. 7 seconds
Approx. 6 seconds
Approx. 2 seconds
•
When scene mode is set to [Skew Correct Mode], you can shoot an image and then
immediately correct any skew in the image. (G P.75)
6
Download from Www.Somanuals.com. All Manuals Search And Download.153
Preventing the Deletion of Files
You can protect files from being accidentally deleted.
Caution------------------------------------------------------------------------------------------
Protected files cannot be deleted normally. However, they will be deleted if you format
the memory where the files are stored.
1
Press the 6(Playback) button.
• The last file recorded is displayed.
2
Press the ADJ./OK button !"#$to display the file you
want to protect or unprotect.
• To protect or unprotect multiple frames, you can also turn the zoom
lever toward 9(Thumbnail View) to display thumbnail view, and then
go to Step 3.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Protect] and press the
button $.
6
Protecting/Unprotecting a File
5
Press the button !"to select
[1 File].
• Press the button #$to select the file.
6
Press the ADJ./OK button.
154Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting Multiple Files Separately
5
Press the button !"to select
[Sel Mult] and then press the
ADJ./OK button.
• If thumbnail view was displayed in
Step 2 on P.154, skip Step 5.
6
7
Press the button !"to select
[Sel. Indiv.] and then press the
ADJ./OK button.
Press the ADJ./OK button !"#$to select the frames
and then press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a range
of files. See Step 7 and beyond for “Specifying a Range of Multiple
Files”.
8
9
Repeat Step 7 to select all the files.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
Press the Fn (Function) button.
Specifying a Range of Multiple Files
6
5
Press the button !"to select
[Sel Mult] and then press the
ADJ./OK button.
• If thumbnail view was displayed in
Step 2 on P.154, skip Step 5.
6
Press the button !"to select
[Sel. Range], and then press
the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.155
7
Press the button !"#$to select the starting point for
the range of files you want to specify and press the
ADJ./OK button.
• If you make a mistake when selecting the starting point for the range
of files, press the DISP. button to return to the screen for selecting the
starting point.
• Press the MENU button to switch to the display for specifying files
separately. See Step 7 and beyond for “Protecting Multiple Files
Separately”.
8
9
Press the button !"#$to
select the ending point for the
range of files you want to
specify and press the ADJ./OK
button.
Repeat Steps 7 and 8 to specify
all ranges.
10 Press the Fn (Function) button.
Protecting/Unprotecting All Files
5
Press the button !"to select
[Select All] or [Cancel All] and
press the ADJ./OK button $.
6
6
Press the ADJ./OK button #$
to select [Yes] and then press
the ADJ./OK button.
156Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Slide Shows
You can display the recorded still images and movie files
sequentially on the screen. This is called a slide show. To view a
slide show, follow the steps below.
1
Press the 6(Playback) button.
• The last file recorded is displayed.
2
3
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [Slide Show] and press
the button $.
• The slide show starts and files are
played back in order.
• If you want to stop the slide show in
progress, press any button on the
camera.
The slide show repeats itself until stopped.
Note ----------------------------------------------------------------------------------------------
•
•
Each still image is displayed for three seconds.
For movies and MP files, all the images you shot are played back.
6
Download from Www.Somanuals.com. All Manuals Search And Download.157
Copying the Contents of the Internal
Memory to an SD Memory Card
You can copy all movies, still images, and sound data stored in the
internal memory onto an SD memory card at once.
1
Turn the camera off.
2
3
4
5
Insert an SD memory card.
Turn the camera on.
Press the 6(Playback) button.
Press the MENU button.
• The playback menu appears.
6
Press the ADJ./OK button "to
select [Copy to Card from
Internal Memory] and press the
button $.
• The display indicates copying is in
progress; once finished, the display
returns to the playback screen.
6
Note ----------------------------------------------------------------------------------------------
•
If the capacity of the SD memory card to which you are copying is insufficient, a
message will be displayed indicating there is not enough capacity. To copy only the
number of shots that will fit into the available capacity, select [Yes] and then press the
ADJ./OK button. To cancel copying, select [No] and then press the ADJ./OK button.
It is not possible to copy the contents of an SD memory card to the internal memory.
When the contents of the internal memory are copied to an SD memory card, the files
saved to [Flag Function Setting] in the internal memory are canceled.
•
•
158Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Printing Service (DPOF)
The still images recorded on an SD memory card can be printed out
if you take them to a store that offers a digital camera print service.
To use a print service, you must make print settings on your
camera. These settings are called Digital Print Order Format
(DPOF) settings.
The DPOF setting specifies one print per still image. You can also
select multiple images for the DPOF setting and specify the number
of copies to print.
Setting/Canceling DPOF for a File
1
Press the 6(Playback) button.
2
Press the ADJ./OK button !"#$to display the still
image for which you want to make the DPOF setting.
3
4
Press the MENU button.
• The playback menu appears.
Press the ADJ./OK button "to
select [DPOF] and press the
button $.
6
5
6
Press the button !"to select
[1 File].
• Press the button #$to select a file.
Press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.159
Setting/Canceling DPOF for All Files
1
Press the 6(Playback) button.
2
Press the MENU button.
• The playback menu appears.
3
Press the ADJ./OK button "to
select [DPOF] and press the
button $.
4
5
Press the button !"to select
[Select All] or [Cancel All].
Press the ADJ./OK button.
• Once the DPOF setting is made, the
DPOF symbol appears on the screen.
Setting DPOF for Multiple Files
To make the DPOF settings for selected still images all at once,
follow the steps below.
6
1
Press the 6(Playback) button.
2
Turn the zoom lever toward 9(Thumbnail View).
• The files are displayed in thumbnail view.
3
4
Press the ADJ./OK button !"#$to select the first still
image for which you want to make the DPOF setting.
Press the MENU button.
• The playback menu appears.
160Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press the ADJ./OK button "to
select [DPOF] and press the
button $.
Press the button !"to set the
number of copies to print.
• Press the button !to increase the
number of copies, or press the button
"to decrease the number of copies.
7
Press the button #$to select the next still image for
which you want to make the DPOF setting.
8
Press the button !"to set the number of copies to print.
• Press the button !to increase the number of copies, or press the
button "to decrease the number of copies.
9
Repeat Steps 7 and 8 to select all the still images for
which you want to make the DPOF setting.
10 Press the ADJ./OK button.
• The display indicates that the selected images are being processed;
once finished, the display returns to the thumbnail view.
Note ----------------------------------------------------------------------------------------------
•
To remove the DPOF settings for multiple still images, follow the same steps
described above to set the number of copies to print to [0] for each image, and then
press the ADJ./OK button.
6
•
You can also cancel the DPOF settings for all still images at once. (G P.160)
Download from Www.Somanuals.com. All Manuals Search And Download.161
Restoring Deleted Files
You can restore all deleted files.
Deleted files cannot be restored after performing any of the
following operations.
• Turning the camera off
• Switching from playback mode to shooting mode
• Using DPOF, Resize, Copy to Card from Internal Memory, Skew
Correction, Level Compensation, White Balance Compensation
or Trim.
• Files with DPOF settings are deleted
• Internal memory or SD memory card is initialized
• Setting or canceling files for [Flag Function Setting]
• Changing the magnification ratio or magnified area of files set to
[Flag Function Setting]
• Exporting MP files using [Export Still Images]
1
Press the 6(Playback) button.
2
Press the MENU button.
• The playback menu appears.
3
Press the ADJ./OK button "to
select [Recover File] and press
the button $.
6
• A screen appears to confirm whether
to restore all files.
• If there are no restorable files, a
confirmation message appears.
4
Press the button $to select [Yes] and then press the
ADJ./OK button.
• All deleted files are restored.
162Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing on a Television
You can view files you have taken on a TV screen. The camera
displays everything on the TV screen just as it would on the picture
display.
To use your television for viewing, connect your camera to the
television with the AV cable that came with your camera. To view
files on a television, follow the steps below.
Video input terminal (yellow)
1
Securely connect the AV cable
to the Video In terminal on the
television.
• Connect the white plug of the AV cable
to the audio input terminal (white) of the
TV unit and the yellow plug to the video
input terminal (yellow).
Audio input terminal (white)
2
3
Make sure that the camera is
off.
Securely connect the AV cable
to the AV output terminal on the
camera.
6
4
5
Set the television to Video mode. (Set the input to Video)
• For details, see the documentation that came with the television.
Press the POWER button, or
press and hold the 6
(Playback) button to turn the
camera on.
Download from Www.Somanuals.com. All Manuals Search And Download.163
Caution------------------------------------------------------------------------------------------
•
When the AV cable is connected to the camera, the picture display and the speaker
output turn off.
•
•
•
Do not force the AV cable into the terminal.
Do not apply excessive force with the AV cable connected.
When using the AV cable, do not move the camera with the AV cable.
Note ----------------------------------------------------------------------------------------------
•
You can connect the AV cable to the Video In terminal on your video recorder and
record what you have shot to a video recorder.
•
Your camera is set to NTSC playback format (used in North America and other
countries/regions) for use with television equipment and other audiovisual equipment.
If the equipment you want to connect to uses PAL format (used in Europe and
elsewhere), then switch your camera to PAL format in the setup menu before
connecting. (G P.196)
6
164Download from Www.Somanuals.com. All Manuals Search And Download.
7 Setup Menu
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
About the Setup Menu
You can change the camera settings by displaying the setup menu
from the shooting menu (G P.97) or playback menu (G P.138).
The setup menu enables you to set the items listed in the table
below.
Setting
Options [Default Settings]
Refer to
P.168
P.169
P.170
P.171
P.173
P.174
Format [Card]
Format [Internal Memory]
LCD Brightness
Reg. My Settings
Step Zoom
MY1, MY2
On, [Off]
Set Fn Button
Off, [Macro Target], AE Lock, AF/Cont. AF
AF/M-trgt AF, AF/MF, AF/Snap, AT-BKT, WB-BKT,
CL-BKT, FOCUS-BKT
*1
*1
*2
*3
ADJ Button Setting 1
ADJ Button Setting 2
ADJ Button Setting 3
ADJ Button Setting 4
Off, [Exposure Comp] , [White Balance] , [ISO]
,
P.176
*2
*4
[Quality] , Focus, Image, Expo. Metering, Auto
*3
Bracket, Flash Comp.
7
*4
ISO Auto-High Settings
AF Auxiliary Light
Operation Sounds
Volume Settings
[AUTO 400], AUTO 800, AUTO 1600
[On], Off
[All], Level Sound, Shutter Sounds
P.178
P.179
P.180
ꢁ ꢁ ꢁ (Mute), ꢂ ꢁ ꢁ (Small), [ꢂ ꢂ ꢁ] (Medium), P.181
ꢂ ꢂ ꢂ (Large)
LCD Confirmation Time
Off, [0.5 seconds], 1 second, 2 seconds,
3 seconds, Hold
P.182
Auto Power Off
LCD Auto Dim
Digital Zoom Image
Level Setting
Grid Guide Display Options
Off, 1 minute, [5 minutes], 30 minutes
[On], Off
[Normal], Auto Resize
P.183
P.184
P.185
P.187
P.188
P.189
Off, [Display], Display+Sound, Sound
[
],
,
Shooting Info. Display
Frame
On, [Off]
Download from Www.Somanuals.com. All Manuals Search And Download.165
Setting
Minimum Distance
Auto Rotate
Card Sequence No.
Date Settings
Language/N
Options [Default Settings]
[Show], Hide
[On], Off
Refer to
P.190
P.191
P.193
P.194
P.195
On, [Off]
(*)
, English, Deutsch, Français, Italiano,
Español, ,
,
,
,
(*)
Video Out Mode
NTSC, PAL
P.196
(*)
The default setting varies depending on where you purchased the camera.
Note ----------------------------------------------------------------------------------------------
•
In easy shooting mode, the quantity and order of the items in the setup menu are
different from other shooting modes. The contents of the settings are the same as
other modes.
•
The items that can be set with [Set Fn Button] and [ADJ Button Setting 1/2/3/4] differ
depending on the shooting mode. See the corresponding reference page for details.
Using the Menu
In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./
OK button” (as in Step 8 below), but you can also confirm the setting and return to the menu
screen by pressing the ADJ./OK button #.
1
Press the MENU button.
• The shooting menu (or the playback menu) appears.
2
Press the ADJ./OK button #.
• In scene mode or continuous mode, press the ADJ./OK button
!"#$to select the [MODE] tab, and then press the ADJ./OK button
"twice. The setup menu appears.
7
3
4
Press the ADJ./OK button ".
• The setup menu appears.
Press the ADJ./OK button
$.
Indicates the range of displayed
screens.
166Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press the ADJ./OK button !"
to select the desired item.
• If the DISP. button is pressed at this
point, the display returns to the screen
shown in Step 3.
• Press the ADJ./OK button "at the
bottom item to display the next screen.
6
7
Press the ADJ./OK button $.
• The menu item settings are displayed.
Press the ADJ./OK button !"
to select the setting.
8
Press the ADJ./OK button.
• The setup menu disappears and the
camera is ready for shooting or playback.
• The setup menu may appear depending on the setting. In this case,
press the MENU button or the ADJ./OK button to return to the shooting
or playback screen.
• Pressing the ADJ./OK button #in Step 8 confirms the setting and the
display returns to the screen shown in Step 5.
Note ----------------------------------------------------------------------------------------------
For some functions, the setting selection method may differ from what is explained here.
For detailed operation, see the explanation of each function.
7
Download from Www.Somanuals.com. All Manuals Search And Download.167
Formatting the SD Memory Card
If the error message [Card Error] is displayed when an SD memory
card is loaded into the camera or the card has been used with a
computer or other digital camera, you must format the card prior to
use with this camera.
Formatting is the process of preparing a card so image data can be
written on it.
Caution------------------------------------------------------------------------------------------
If you format a card that still has images stored on it, the images will be lost.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Check that [Format [Card]] is
selected and press the ADJ./
OK button $.
• A screen appears to confirm
formatting.
3
4
Press the button #$to select
[Yes] and then press the ADJ./
OK button.
• Formatting starts. When it is done, the display returns to the setup
menu.
• If no SD memory card is loaded, a message will be displayed. After
turning the power off, load an SD memory card and repeat the
formatting process again.
7
Press the MENU button or the ADJ./OK button.
Protecting your images from being deleted----------------------------------------
Move the write-protection switch on the SD memory card to “LOCK” to prevent your still
images from being accidentally erased or the card from being formatted (G P.24). If
you unlock the card (by returning the switch to its original position), it is once again
possible to add and erase images and format the card.
168Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting the Internal Memory
If the error message [Format internal memory.] is displayed, you
must format the internal memory prior to use.
Caution------------------------------------------------------------------------------------------
Formatting the internal memory deletes all of the images recorded in the memory. If you
have images in the internal memory that you do not want to delete, copy the images to
the SD memory card before formatting the internal memory. (G P.158)
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Format [Internal
Memory]] and press the button
$.
• A screen appears to confirm
formatting.
3
4
Press the button #$to select
[Yes] and then press the ADJ./OK button.
• Formatting starts. When it is done, the display returns to the setup
menu.
Press the MENU button or the ADJ./OK button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.169
Adjusting the Picture Display
Brightness
To adjust the brightness of the picture display, follow the steps
below.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [LCD Brightness] and
press the button $.
3
Press the button !"to adjust
the brightness.
• Move the slider on the LCD brightness
adjustment bar down to make the
picture display darker and up to make
it brighter. The brightness of the
picture display changes as the slider is
moved along the bar.
• To cancel brightness adjustment, press the DISP. button to cancel the
setting and return to the shooting menu.
7
4
5
When you reach the desired brightness, press the ADJ./
OK button.
• The display returns to the setup menu.
Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
When [LCD Auto Dim] is set to [On] on the setup menu (G P.184), the picture
display dims to conserve battery power if the camera is not moved for approximately
five seconds. Move the camera or press any button to return to the original picture
display brightness.
•
The brightness display shows the view through the lens (shooting mode) or the most
recently viewed picture (playback mode; if no picture is available for playback, no
image will be shown in the brightness display).
170Download from Www.Somanuals.com. All Manuals Search And Download.
Registering My Settings
The My Settings function allows you to easily shoot with your
desired settings.
You can register two groups of settings as “My Settings”. Setting the
mode dial to MY1 allows you to shoot with the settings registered in
[MY1]. Setting the mode dial to MY2 allows you to shoot with the
settings registered in [MY2]. (G P.83)
To register the current camera settings as My Settings, follow the
steps below.
1
Change the camera settings to the settings to be
registered as My Settings.
2
3
Display the setup menu.
• For the operating procedure, see P.166.
Press the ADJ./OK button "to
select [Reg. My Settings] and
press the button $.
• A confirmation message appears.
4
5
Press the button #$to select
[MY1] or [MY2] and press the
ADJ./OK button.
• The current camera settings are registered and the display returns to
the setup menu.
7
• If you do not want to register them, press the DISP. button.
Press the MENU button or the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.171
Settings Saved in [Reg. My Settings]
Shooting mode (5/3/MY1/MY2/SCENE/Q /R
Picture Quality/Size
Focus
)
Pre-AF
Focal distance used in Manual
Exposure Metering
Image Settings
Flash Exposure Compensation
Dynamic Range Expansion
Plus Normal Shooting
Auto Bracket
CL-BKT
FOCUS-BKT
WB-BKT
Time Exposure
Custom Self-Timer
Camera Shake Correction
Slow Shutter Limit
Date Imprint
Exposure Compensation
White Balance
ISO Setting
Zoom position
Macro
Flash mode
Scene mode
7
Self-timer
DISP. mode
Step Zoom
Digital Zoom Image
Level Setting
Grid Guide Display Options
Minimum Distance
Density
Frame Rate
172Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing the Focal Length of the Zoom
Step zooming allows you to set the focal length of the zoom so that
it stops at eight levels (28, 35, 50, 85, 105, 135, 200, 300 mm*).
* Equivalent to that on a 35 mm camera
Available Settings
On (Step zooming on)
Off (Step zooming off) *Default setting
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Step Zoom] and press
the button $.
3
4
Press the button !"to select
[On].
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
In Macro mode, the step zoom focal lengths are roughly equivalent to 31, 35, 50, 85,
105, 135, 200 and 300 mm on a 35 mm camera.
•
Assigning [Step Zoom] to the Fn (Function) button with [Set Fn Button] (G P.174)
allows you to switch between on and off for step zoom by pressing the Fn button.
(G P.73)
7
Download from Www.Somanuals.com. All Manuals Search And Download.173
Fn (Function) Button Settings
When a function is assigned to the Fn button, you can easily switch
from one function to another simply by pressing the Fn button.
The following functions can be assigned to the Fn button. For
information on how to use the Fn button, see the corresponding
reference page.
Available Setting
Macro Target
Description
Refer to
(*1)
Moves the AF target without moving the camera to P.67
shoot close-ups.
AE Lock
Locks the exposure.
Switches between auto focus and continuous AF. P.69
Switches between auto focus and multi-target AF. P.70
Switches between auto focus and manual focus. P.71
Switches between auto focus and snap mode.
Switches between on and off for each function.
P.68
(*2)
AF/Cont. AF
AF/M-trgt AF
AF/MF
(*3)
(*3)
(*3)
AF/Snap
P.72
P.73
Step Zoom, AT-BKT,
WB-BKT, CL-BKT,
FOCUS-BKT
(*1)
Default setting
[Multi AF] or [Spot AF]
[Multi AF], [Spot AF] or [Continuous AF]
(*2)
(*3)
7
174Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
(*1)
The items that can be set for each shooting mode are shown below.
(*2)
SCENE
(*2)
Available Settings
R
Q
5
3
Macro Target
Step Zoom
AE Lock
AF/Cont. AF
AF/M-trgt AF
AF/MF
AF/Snap
AT-BKT
WB-BKT
CL-BKT
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
-
O
O
O
O
-
-
O
-
-
O
O
O
O
-
O
O
O
O
-
O
O
-
O
O
O
O
-
-
O
O
O
-
-
O
-
O
O
O
O
-
O
-
O
O
-
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
-
O
O
-
-
-
-
O
-
-
-
O
O
-
-
-
-
-
-
O
O
O
O
-
-
-
-
-
-
-
-
-
-
-
-
-
FOCUS-BKT
-
-
-
-
-
-
-
-
(*1)
The Fn button can not be used for the selected function when [Miniaturize] is selected
in scene mode.
The functions not marked with a circle (O) can also be assigned to the Fn button, but
they will not operate if the button is pressed in scene mode or movie mode.
(*2)
1
Display the setup menu.
• For the operating procedure, see P.166.
7
2
Press the ADJ./OK button "to
select [Set Fn Button] and
press the button $.
3
4
Press the button !"to select
the settings.
Press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.175
ADJ. Button Settings
When functions are assigned to the ADJ./OK button, you can
display various shooting setting screens with fewer button
operations and without displaying the shooting menu.
You can use [ADJ Button Setting 1] to [ADJ Button Setting 4] to
assign camera functions that can be activated by pressing the ADJ./
OK button.
For information on how to use the ADJ. mode, see P.62.
The following functions can be assigned to the ADJ./OK button.
Available Settings
Off
Refer to
-
Exposure Comp *Default setting for [ADJ Button Setting 1]
P.124
P.126
P.128
P.101
P.103
P.109
P.108
P.112
P.111
P.82
White Balance
ISO
Quality
*Default setting for [ADJ Button Setting 2]
*Default setting for [ADJ Button Setting 3]
*Default setting for [ADJ Button Setting 4]
Focus
Image
Expo. Metering
Auto Bracket
Flash Comp.
Density
7
176Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
The items that can be set for each shooting mode are shown below.
SCENE
R
(*)
3(*)
Available Settings
EASY
5
Q
Exposure Comp.
White Balance
ISO
Quality
Focus
O
O
O
O
O
O
O
O
O
-
-
-
O O O
-
-
O
O
O
O
O
O
O
-
O
O
O
-
O
O
O
-
O
O
-
O
O
O
O
-
-
O
-
-
-
O
O
O
O
O
O
O
O
-
-
-
-
-
-
-
-
-
-
O
-
-
-
-
-
-
O
-
-
Image
-
-
-
-
-
-
-
-
Expo. Metering
Auto Bracket
Flash Comp.
Density
-
-
O
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(*)
The function assigned to the ADJ./OK button can not be changed.
1
Display the setup menu.
• For the operating procedure, see P.166.
7
2
Press the ADJ./OK button "to
select [ADJ Button Setting 1],
[ADJ Button Setting 2], [ADJ
Button Setting 3], or [ADJ
Button Setting 4], and then
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.177
ISO Auto-High Settings
You can change the upper limit of the ISO setting for [Auto-Hi] (Auto
high sensitivity setting) (G P.128) in [ISO Setting] on the shooting
menu.
Available Settings
AUTO 400 *Default setting
AUTO 800
AUTO 1600
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [ISO Auto-High
Settings] and press the button
$.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
Images shot with a higher sensitivity may appear grainy.
7
178Download from Www.Somanuals.com. All Manuals Search And Download.
AF Auxiliary Light
You can set whether to use the AF auxiliary light when shooting with
auto focus.
When [AF Auxiliary Light] is set to [On], the AF auxiliary light lights
when it is difficult to measure the distance with auto focus when
shooting in dark surroundings, and the auto focus distance is
measured.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [AF Auxiliary Light] and
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.179
Operation Sound Settings
The following five operation sounds are made during camera
operation.
Start sound
: Sound when the camera is turned on.
Shutter sound
Focus sound
: Sound when the shutter release button is pressed.
: Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound
Level sound
: Error sound indicating an operation that cannot be performed.
: When [Level Setting] is set to [Sound] or [Display+Sound]
(G P.187), the sound is continually emitted at a set interval when
the camera is level in shooting mode.
Available Settings
All *Default setting
Level Sound
Description
All sounds on
Only the level sound is emitted.
Only the shutter sound and level sound are emitted.
Shutter Sounds
Note ----------------------------------------------------------------------------------------------
•
If you try to perform an operation that cannot be performed, the beep sound is emitted
regardless of the [Operation Sounds] setting.
•
Regardless of the option selected, no sound is emitted when [Discreet Mode] is
selected in scene mode.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Operation Sounds] and
press the button $.
7
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
180Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting/Muting the Operation
Sound Volume
The operation sound volume can be changed.
Available Settings
ꢁ ꢁ ꢁ (Mute)
ꢂ ꢁ ꢁ (Small)
ꢂ ꢂ ꢁ (Medium) *Default setting
ꢂ ꢂ ꢂ (Large)
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Volume Settings] and
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
When [Volume Settings] is set to [ꢁ ꢁ ꢁ] (Mute), the level sound is not emitted even
when [Level Setting] is set to [Display+Sound] or [Sound]. (G P.187)
Regardless of the option selected, no sound is emitted when [Discreet Mode] is
selected in scene mode.
•
7
Download from Www.Somanuals.com. All Manuals Search And Download.181
LCD Image Confirmation Time
Immediately after you press the shutter release button, the still
image taken is displayed on the screen for a moment so you can
check it. By default, the image confirmation time is set to 0.5
second, but this can be changed.
Available Settings
Off (The image is not displayed for confirmation.)
0.5 seconds *Default setting
1 second
2 seconds
3 seconds
Hold (The image remains displayed until the next time you half-press the shutter release
button.)
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [LCD Confirmation
Time] and press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
7
Note ----------------------------------------------------------------------------------------------
When [LCD Confirmation Time] is set to [Hold], the displayed image can also be enlarged
(G P.50) or deleted (G P.52).
182Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Power Off
If you do not operate the camera for a set period of time, it shuts off
automatically to conserve battery power (Auto Power Off).
By default, auto power off is set to five minutes, but you can change
this setting.
Available Settings
Off (Auto Power Off is turned off)
1 Min.
5 Min. *Default setting
30Min.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Auto Power Off] and
press the button $.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
To continue using the camera after auto power off turned the camera off, press the
POWER button to turn the camera on again. You can also press and hold the 6
(Playback) button to turn the camera on in playback mode.
Auto power off function does not work when the camera is connected to a computer
or printer.
7
•
•
When using interval shooting, the [Auto Power Off] setting is disabled and the auto
power off function does not work.
Download from Www.Somanuals.com. All Manuals Search And Download.183
LCD Auto Dimmer Mode
When [LCD Auto Dim] is set to [On], the picture display dims to
conserve battery power if the camera is not moved for
approximately five seconds. Move the camera or press any button
to return to the original picture display brightness. The default
setting is [On].
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [LCD Auto Dim] and
press the button $.
3
Press the button !"to select
[On].
Caution------------------------------------------------------------------------------------------
The [LCD Auto Dim] setting is disabled in synchro monitor mode. (G P.56)
7
184Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Resize Zoom
To record pictures taken with digital zoom at actual size, select
[Auto Resize]. This function allows you to crop and record a shot
image. Conventional digital zoom enlarges a portion of an image to
a set magnification. In contrast, auto resize records pictures taken
with digital zoom at actual size, avoiding the drop in image quality
that occurs when the image is enlarged. The image recording size
changes depending on the auto resize zoom magnification.
Auto resize zoom is available only when [Picture Quality/Size] is set
to 3456 × 2592. (G P.101)
Available Settings
Available Settings
Description
Normal *Default setting
Normal digital zoom. Records the image at the image size set
with [Picture Quality/Size].
Auto Resize
Automatically resizes and then records the image.
Note ----------------------------------------------------------------------------------------------
The digital zoom is enabled when [Picture Quality/Size] is set to a size other than
3456 × 2592.
Zoom Magnification and Recorded Image Size
(*)
Picture Quality/Size
3456 × 2592(9M)
3072 × 2304(7M)
2592 × 1944(5M)
2048 × 1536(3M)
1280 × 960(1M)
640 × 480(VGA)
Zoom Magnification
Focal Length
300 mm
330 mm
400 mm
500 mm
1.0 ×
1.1 ×
1.3 ×
1.7 ×
2.7 ×
5.4 ×
7
810 mm
1620 mm
(*)
Equivalent to that on a 35 mm camera
Download from Www.Somanuals.com. All Manuals Search And Download.185
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Digital Zoom Image]
and press the button $.
3
Press the button !"to select
[Auto Resize].
4
5
Press the ADJ./OK button.
Turn and hold the zoom lever
toward z(Telephoto) until
the maximum magnification is
reached on the zoom bar, then
momentarily release the zoom
lever, and then turn the zoom
lever again toward z.
• Each time you turn the zoom lever toward z, the image is resized by
one setting.
• The size at which the image is recorded is displayed above the zoom
bar.
Caution------------------------------------------------------------------------------------------
•
This function is not available when scene mode is set to [Skew Correct Mode]. If [Auto
Resize] is set in these situations, the digital zoom is activated instead.
If the picture quality is set to Fine mode and the auto resize zoom is used, the
compression ratio changes to Normal when recording.
•
7
186Download from Www.Somanuals.com. All Manuals Search And Download.
Level Confirmation
When [Level Setting] is turned on, the camera uses a level indicator
and sounds to let you know whether the image is level. You can
select from the following level confirmation settings. For information
on how to use the level function during shooting, see P.58.
Available Settings
Off
Display
Description
The level indicator will not display. The level sound will not emit.
The level indicator will display. The level sound will not emit.
*Default setting
Display+Sound
Sound
The level indicator appears on the screen and a level sound is
emitted when the camera is level.
The level indicator will not display. A level sound is emitted when
the camera is level.
1
Display the setup menu.
• For the operating procedure, see P.166.
• You can also press and hold the DISP. button in shooting mode to
display the setting menu. If you pressed and held the DISP. button,
skip to Step 3.
2
Press the ADJ./OK button "to
select [Level Setting] and
press the button $.
3
4
Press the button !"to select
the desired setting.
7
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
•
•
For information on how to use the level function during shooting, see P.58.
The level function is not available when recording movies or during interval shooting.
When [Volume Settings] is set to [ꢁ ꢁ ꢁ] (Mute), the level sound is not emitted even
when [Level Setting] is set to [Display+Sound] or [Sound].
Download from Www.Somanuals.com. All Manuals Search And Download.187
Grid Guide Display Options
Choose the type of framing grid available in shooting mode.
Available Settings
Description
A three-by-three grid for “rule of thirds” composition.
*Default setting
A four-by-four grid with diagonal lines running from corner to
corner makes it easy to find the center of the subject. Use for
architectural photography or photographing products for display.
A two-by-two grid with the center of the frame left clear to make
it easier to view the subject. Use if your subject is in motion.
1
Display the setup menu.
• For the operating procedure, see P.166.
7
2
Press the ADJ./OK button "to
select [Grid Guide Display
Options] and press the button
$.
3
4
Press the button !"to select
the desired setting.
Press the ADJ./OK button.
188Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Information Display Frame
When [Shooting Info. Display Frame] is set to [On], you can display
the shooting information display frame for normal symbol display or
histogram display (G P.56). With the shooting information display
frame, the shooting information is not displayed over the subject, so
you can more easily compose your shot.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button
select [Shooting Info. Display
"
to
Frame] and press the button
$.
3
Press the button !"to select
[On].
4
5
Press the ADJ./OK button.
Press the DISP. button to
change the display.
• The shooting information display
frame can be used with normal symbol
display and histogram display.
(G P.56)
7
Note ----------------------------------------------------------------------------------------------
•
•
In easy shooting mode, the display cannot be changed using the DISP. button.
Shooting information display frame cannot be used in movie mode.
Download from Www.Somanuals.com. All Manuals Search And Download.189
Minimum Shooting Distance Display
During shooting, the minimum shooting distance changes
depending on the zoom position. To display the minimum shooting
distance on the screen, set [Minimum Distance] to [Show].
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Minimum Distance] and
press the button $.
3
4
Press the button !"to select
[Show].
Press the ADJ./OK button.
• The minimum shooting distance is
displayed on the screen.
7
190Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Rotation of Playback
Images
You can set the camera to automatically rotate the image during
playback according to the position of the camera.
Available Settings
On *Default setting
Off
Description
The playback image is automatically rotated.
The playback image is not automatically rotated.
When [Auto Rotate] is set to [On], the direction of the playback
image will be as follows.
When you play back images with the camera held horizontally:
Images shot with the camera held horizontally will appear with
the same horizontal orientation. Images shot with the camera
held vertically will automatically be rotated to a vertical
orientation.
When you play back images with the camera held vertically:
Images shot with the camera held vertically will appear with the
same vertical orientation. Images shot with the camera held
horizontally will automatically be rotated to a horizontal
orientation.
When the camera is rotated during playback, the image is
automatically rotated according to the camera position.
1
Display the setup menu.
• For the operating procedure, see P.166.
7
2
Press the ADJ./OK button "to
select [Auto Rotate] and press
the button $.
3
4
Press the button !"to make
the setting.
Press the ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.191
Caution------------------------------------------------------------------------------------------
•
The playback image is not automatically rotated, even when [Auto Rotate] is set to
[On], in the following cases.
•
•
•
•
When playing back images shot in movie mode.
In thumbnail view (G P.48)
When playing back images shot with the camera tilted too far forward or backward.
When playing back images upside-down (with the shutter release button facing
down)
•
•
When changing the camera position during magnified playback.
When the image is going through skew correction (the correction area is displayed)
in playback mode (G P.152)
•
When playing back a slide show or viewing camera images on a TV, the camera is
detected as being in the horizontal position even when [Auto Rotate] is set to [On]. In
this case, when you play back images with the camera positioned vertically, images
shot horizontally are not automatically rotated. The playback images are not
automatically rotated even if you rotate the camera during playback.
Note ----------------------------------------------------------------------------------------------
The following types of images are automatically rotated according to the orientation of
the first image.
•
•
Images shot using dynamic range double shot with [Plus Normal Shooting] set to [On].
Images shot using bracket shooting, normal continuous mode, M-Cont Plus, Speed
Cont or Multi-trgt AF.
7
192Download from Www.Somanuals.com. All Manuals Search And Download.
File Name Settings
When you shoot a still image, it is stored on an SD memory card or
in the internal memory with a consecutively numbered file name
that is automatically assigned.
When you switch SD memory cards, you can set your camera to
continue consecutive numbering from the previously loaded card.
Available Settings
Description
On (Continue numbering) File names are automatically assigned to still images you take,
in the format of “R” followed by seven digits, from R0010001.jpg
to R9999999.jpg.
With this setting, file numbering is continued even when the SD
memory card is exchanged.
Off (Do not continue
numbering)
*Default setting
File numbering is assigned, from RIMG0001.jpg to
RIMG9999.jpg, for each SD memory card.
When the file name reaches RIMG9999, no more data can be
recorded to that card.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Card Sequence No.]
and press the button $.
3
4
Press the button !"to select
the desired setting.
7
Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
When data is recorded to the internal memory, files are assigned consecutively
numbered file names, just as if [Card Sequence No.] is set to [Off].
•
When images are transferred to a computer using DL-10 (G P.212), the file being
transferred is renamed and saved. The file is saved with the name “RIMG****.jpg”
(where **** indicates a number) even if [Card Sequence No.] is set to [On].
Caution------------------------------------------------------------------------------------------
When the file name reaches RIMG9999 or R9999999, no more files can be saved. In this
case, move image data from the SD memory card to the memory of the computer or a
storage medium, and then format the SD memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.193
Date and Time Settings
You can shoot still images with the time or date stamped onto the
picture.
The date/time setting on the setup menu is explained here.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Date Settings] and
press the button $.
3
4
Press the button !"#$to set
the year, month, date, time and
format.
• Change the setting with !"and
move the item with #$.
Check the information on the
screen and then press the
ADJ./OK button.
•
The confirmation screen appears.
7
5
6
Press the ADJ./OK button.
•
Once you have set the date and time, the display returns to the setup
menu.
Press the MENU button or the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
•
If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
•
To retain the date and time settings, load a battery with adequate remaining power for
more than two hours.
194Download from Www.Somanuals.com. All Manuals Search And Download.
Language Settings
You can change the language displayed on the screen.
The default setting varies depending on where you purchased the
camera.
Available Settings
(Japanese)
(Russian)
English
(Simplified Chinese)
(Traditional Chinese)
(Korean)
Deutsch (German)
Français (French)
Italiano (Italian)
(Thai)
Español (Spanish)
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Language/N ] and
press the button $.
• The language selection screen
appears.
3
4
Press the button !"#$to
select the desired setting.
7
Press the ADJ./OK button.
• Once you have set the language, the
display returns to the setup menu.
5
Press the MENU button or the
ADJ./OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.195
TV Playback Method
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera. (G P.163)
Your camera is set to NTSC video format (used in North America
and other countries/regions) for use with television equipment and
other audiovisual equipment. If the equipment you want to connect
to uses PAL format (used in Europe and elsewhere), then switch
your camera to PAL format before connecting.
The default setting varies depending on where you purchased the
camera.
Available Settings
NTSC
PAL
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button "to
select [Video Out Mode] and
press the button $.
3
4
Press the button !"to select
the desired setting.
7
Press the ADJ./OK button.
• Once you have set the video format, the display returns to the Setup
menu.
Note ----------------------------------------------------------------------------------------------
This camera is not compatible with SECAM format.
196Download from Www.Somanuals.com. All Manuals Search And Download.
8 Direct Printing
Instructions in this manual to “Press the ADJ./OK button !"#$”
indicate that you should press the ADJ./OK button in the up, down,
left or right direction. Instructions to “Press the ADJ./OK button”
indicate that you should press directly down on the button.
About the Direct Print Function
The Direct Print standard enables direct printing from a camera to
a printer by connecting them via a USB cable. Photos can be
printed quickly and easily from your digital camera without using a
computer.
Caution------------------------------------------------------------------------------------------
You cannot print AVI files (movies) or MP files with this function.
Note ----------------------------------------------------------------------------------------------
•
•
This camera uses PictBridge, an industry standard for Direct Printing.
Your printer must be compatible with PictBridge to use the Direct Print function. For
support information, see the documentation that came with the printer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.197
Connecting the Camera to a Printer
Connect your camera to a printer using the USB cable provided.
1
Make sure that the camera is off.
2
Connect your camera to a
printer using the USB cable
provided.
• Your camera turns on automatically.
• Turn on the printer if it is not already on.
Note ----------------------------------------------------------------------------------------------
To disconnect the camera from the printer, check that the camera is turned off after
printing is finished, and disconnect the USB cable.
Caution------------------------------------------------------------------------------------------
•
•
•
Do not force the USB cable into the terminal.
Do not apply excessive force with the USB cable connected.
When using the USB cable, do not move the camera with the USB cable.
8
198Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Still Images
You can print still images from the camera with a PictBridge-
compatible printer.
Still images are sent from the internal memory when no SD memory
card is loaded or from an SD memory card when one is loaded.
Caution------------------------------------------------------------------------------------------
Do not disconnect the USB cable during printing.
Note ----------------------------------------------------------------------------------------------
•
If a [Printer Error.] message appears during image transfer, check the printer status
and take the appropriate action.
•
If a computer connection message appears even though the camera is connected to
the printer, reconnect the camera and press the ADJ./OK button within 2 seconds.
Printing One or All Still Images
1
Check that the printer is ready
to print.
• The [Connecting…] screen appears.
2
3
Press the ADJ./OK button.
• The Direct Print playback mode
screen appears.
Press the ADJ./OK button !"#$to select an image
for printing.
4
5
Press the ADJ./OK button.
8
Press the ADJ./OK button !"
to select [1 File] or [All Files].
6
Press the ADJ./OK button.
• The Direct Print menu appears.
Cancel
1
File
All Files
Execute
Download from Www.Somanuals.com. All Manuals Search And Download.199
7
Press the ADJ./OK button !"
to select an item, and then
press the button $to display
the detailed options screen.
• When [Connecting…] is displayed, the
connection to the printer is not yet
established. When a connection is
established, [Connecting…]
disappears and [Direct Print] appears. Proceed with this step after the
connection is established.
• The following items can be selected. Each item is available only when
supported by the printer connected to the camera.
Item Name
Paper Size
Paper Type
Layout
Description
Sets the paper size.
Sets the paper type.
Sets the number of images printed on a sheet of paper. The
number of images that can be laid out on a sheet of paper
varies depending on the connected printer.
Date Print
Selects whether to print the date (shooting date). The date
format can be set using the date/time option in the setup menu.
If the picture was taken using [Date Imprint] (G P.123), only
the imprinted date will be printed.
File Name Print
Optimize Image
Selects whether to print the file name.
Selects whether to optimize the image data (still image) prior
to printing on the printer.
Print Size
Print Quality
Report Print
Sets the print image size.
Sets the print quality.
Prints on forms.
(*)
Printing Quantity
Toner Saving
Sets the print quantity.
Selects whether to conserve toner by using less ink during
printing.
Selects whether to print on both sides of the paper. During
duplex printing, one copy is printed for each still image. Only
one copy is printed even if you selected more than one copy
to print in Step 6 on P.202.
(*)
8
(*)
1-Side/2-Sides
(*)
Each item is available only when supported by the Ricoh printer connected to the
camera.
8
Press the ADJ./OK button !"to select the setting, and
then press the ADJ./OK button.
• The display returns to the Direct Print menu.
200Download from Www.Somanuals.com. All Manuals Search And Download.
9
Repeat Steps 7 and 8 to change other settings as
required.
Note ----------------------------------------------------------------------------------------------
•
To specify the settings as the default settings
next time the camera is connected to the
printer, press the MENU button when the
screen in Step 7 is displayed. When the screen
at the right appears, press the ADJ./OK button
#$to select [Yes] and press the ADJ./OK
button.
•
To use the settings last set the next time the
camera is connected to the printer, select [No].
10 Press the ADJ./OK button.
• The selected still images are sent to the printer and the [Sending…]
screen appears.
• Pressing the DISP. button cancels the operation.
• When the images have been sent to the printer, the display returns to
the Direct Print playback mode screen and printing starts.
8
Download from Www.Somanuals.com. All Manuals Search And Download.201
Printing Several Still Images
1
Check that the printer is ready
to print.
• The [Connecting…] screen appears.
2
Press the ADJ./OK button.
• The Direct Print playback mode
screen appears.
3
4
Turn the zoom lever toward 9(Thumbnail View).
• The screen is divided into 20 frames and thumbnails are displayed.
Press the ADJ./OK button !"#$to select a still image
for printing.
5
6
Press the ADJ./OK button.
Press the ADJ./OK button !"
to set the number of copies to
Prnt Fil
Last File
F 160
1
print.
• Press the button !to increase the
number of copies, or press the button
"to decrease the number of copies.
Forward
7
Press the button #$to select
the next still image for printing.
8
9
Press the button !"to set the number of copies to
print.
Repeat Steps 7 and 8 to select all the still images to be
printed and the number of copies for each.
8
10 Press the ADJ./OK button.
• The Direct Print menu appears.
202Download from Www.Somanuals.com. All Manuals Search And Download.
11 Press the ADJ./OK button !"
to select an item, and then
press the button $to display
the detailed options screen.
• When [Connecting…] is displayed, the
connection to the printer is not yet
established. When a connection is
established, [Connecting…]
disappears and [Direct Print] appears. Proceed with this step after the
connection is established.
• For available settings, see P.200.
12 Press the ADJ./OK button !"to select the setting, and
then press the ADJ./OK button.
• The display returns to the Direct Print menu.
13 Repeat Steps 11 and 12 to change other settings as
required.
14 Press the ADJ./OK button.
• The selected still images are sent to the printer and the [Sending…]
screen appears.
• Pressing the DISP. button cancels the operation.
• When all the selected still images have been sent from the camera to
the printer, the camera display returns to the Direct Print playback
mode screen.
Note ----------------------------------------------------------------------------------------------
•
Only images with a printer symbol (
) are printed. If you cancel printing and then
try to print again, make sure that the printer symbol is on the images you want to print.
The same still image can also be printed several times on a single sheet.
The available items vary depending on the functions of the printer.
To print images using the printer’s default settings, select [Printer Select] on the
detailed options screen.
•
•
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.203
9 Downloading Images to Your Computer
The screen images shown here may differ from the images
displayed on your computer depending on your computer OS.
For Windows
Refer to P.217 for Macintosh.
You can download images to a computer using either of the
following methods.
1
Download images using DL-10 or other image
download software. (G P.212)
To use DL-10, you must install the software from the supplied CD-ROM (G P.206).
2
Download images without using DL-10 or other
image download software. (G P.213)
Caution------------------------------------------------------------------------------------------
Pictures can not be copied from the camera to computers running Windows 98 or
Windows 98SE. Use a card reader to copy pictures from a memory card (G P.215).
Note ----------------------------------------------------------------------------------------------
For details on how to download images from the camera to your computer, see the
“Software User Guide” available from the supplied CD-ROM. For how to display the
“Software User Guide”, see P.210.
9
204Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements for Using the Supplied
CD-ROM
The following environments are necessary for using the supplied
CD-ROM.
Please check your computer, or the computer’s user manual.
Operating Systems
Supported
Windows 2000 Professional Service Pack 4
Windows XP Home Edition Service Pack 3/Professional Service Pack 3
Windows Vista Service Pack 2
CPU
Windows 2000/Windows XP: Pentium® lll 500 MHz or faster
Windows Vista: Pentium® lll 1 GHz or faster
Windows 2000/Windows XP: 256 MB or more
Windows Vista: 512 MB or more
Memory
Hard drive space required 160 MB or more
for installation
Display Resolution
Display Colors
CD-ROM Drive
USB Port
1024 × 768 pixels or greater
65,000 colors or greater
A CD-ROM drive compatible with the above-mentioned computer
A USB port compatible with the above-mentioned computer
Caution------------------------------------------------------------------------------------------
•
•
•
•
•
•
•
The supplied CD-ROM is not supported on 64-bit versions of the Windows operating
system.
The supplied CD-ROM is not supported on Windows 98/Windows 98 SE and Windows
Me.
If your computer has an upgraded OS, the USB function may not work normally, so it
cannot be supported.
The provided software may not operate properly if changes are made to the operating
system, such as with patches and service package releases.
The camera does not support connection to a USB port added by using an extension
function (PCI bus or other).
If used in conjunction with a hub or other USB devices, the software may not work
properly.
When dealing with movies and other large files, a larger memory environment is
recommended.
9
Download from Www.Somanuals.com. All Manuals Search And Download.205
CD-ROM Setup
Once you insert the supplied CD-ROM
in the CD-ROM drive, the installer
screen appears automatically.
Item Name
Installing the software
Description
Refer to
P.206
Use this button to install software required for
batch downloading and editing of images.
Browse User’s Manual
(Software Version)
Click this to display the “Software User Guide”
(PDF).
P.210
Browse CD-ROM Content
Click this to display the list of files contained on P.210
the CD-ROM.
When [Installing the software] Is Clicked
The following software will be installed:
Software
DL-10
Irodio Photo & Video
Studio
Description
Downloads images collectively to your computer.
Shot images can be displayed, managed, or edited.
USB Driver
Used to connect an earlier model Ricoh camera to a computer
running Windows 98/Windows 98 SE/Windows Me/Windows
2000. Not available with this camera.
WIA Driver
Used to connect an earlier model Ricoh camera to a computer
running Windows XP/Windows Vista. Not available with this
camera.
9
206Download from Www.Somanuals.com. All Manuals Search And Download.
Caution------------------------------------------------------------------------------------------
•
Do not install the software when the camera is connected to your computer with a USB
cable.
•
The names for DC Software items differ from the names for Caplio Software items
provided with previous models as shown below.
Caplio Software
RICOH Gate La
Caplio Viewer
Caplio Server
Caplio Setting
DC Software
DL-10
DU-10
(*)
(*)
SR-10
(*)
ST-10
(*)
Not used with this camera.
If Caplio Software from a CD-ROM supplied with a previous model is already installed
on your computer, a message asking you to uninstall the Caplio Software before
installing DC Software will appear when you try to install the new software. Please
follow the instructions in the message.
If Caplio Viewer, Caplio Server, or Caplio Setting is already installed on your
computer, it will be replaced with the new software and you will be able to continue
using the software as before.
If you have already uninstalled the Caplio Software before the message appears
(G P.211), DU-10, SR-10, or ST-10 will not be installed even if you install DC
Software.
•
Note that uninstalling the software for earlier Ricoh cameras may reset user
preferences for DL-10 or RICOH Gate La.
•
•
Administrator privileges are required for installation.
DL-10 is not network-compatible. Use as a stand-alone application.
Note ----------------------------------------------------------------------------------------------
The camera is provided with Irodio Photo & Video Studio software that allows you to
display and edit images from your computer. For how to use Irodio Photo & Video Studio,
see the displayed “Help”.
For the latest information about Irodio Photo & Video Studio, access the Web page of
Pixela Co., Ltd. (http://www.pixela.co.jp/oem/irodio/e/irodio_digitalphoto_videostudio/).
9
Download from Www.Somanuals.com. All Manuals Search And Download.207
Here is an example of the Windows XP screen.
1
Start your computer and insert
the supplied CD-ROM in the
CD-ROM drive.
Operating systems other than
Windows Vista
• The installer screen appears
automatically.
Windows Vista
• The Autorun screen appears
automatically.
• Select [Run Autorun.exe]. The installer screen appears automatically.
2
Click [Installing the software].
Operating systems other than Windows Vista
• After a while, the [Choose Setup Language] screen appears.
Windows Vista
• A screen appears to confirm user account management.
• Select [Allow] for the access request to the computer. After a while, the
[Choose Setup Language] screen appears.
3
4
Confirm the language, and then click [OK].
• The [Welcome to the InstallShield Wizard for DC Software] screen
appears.
Click [Next].
• The [Choose Destination Location]
screen appears.
9
208Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Confirm where you want to
install and then click [Next].
• The [Select Program Folder] screen
appears.
Confirm the destination
location and then click [Next].
• The Irodio Photo & Video Studio
installer starts. Install Irodio Photo &
Video Studio following the messages
displayed on the screen.
Depending on your computer, it may
take some time until the next screen is
displayed.
• When installation of Irodio Photo &
Video Studio is completed, a dialog
box appears, indicating that all
software applications have been
installed.
7
Click [Finish].
• A dialog box indicating that
installation of DC Software is
complete appears.
8
When a message appears asking you to restart your
computer, select [Yes, I want to restart my computer
now.] and then click [Finish].
• Your computer will restart automatically.
• After your computer restarts, a Windows security warning message
appears.
9
Click [Unblock] for DL-10.
9
Note ----------------------------------------------------------------------------------------------
You can remove (uninstall) the software. (G P.211)
Download from Www.Somanuals.com. All Manuals Search And Download.209
When [Browse User’s Manual (Software
Version)] Is Clicked
The “Software User Guide” (PDF file) on the CD-ROM is displayed
on your computer screen.
If you have Acrobat Reader or Adobe Reader installed on your
computer, simply click [Browse User’s Manual (Software Version)].
Adobe Reader must be installed to view the PDF file.
When [Browse CD-ROM Content] Is Clicked
You can check folders and files on the CD-ROM. The CD-ROM
contains not only the software installed by clicking [Installing the
software] but also Adobe Reader software.
Adobe Reader
Adobe Reader is required to display the operation manual (PDF
file). If the computer is running under Windows, Adobe Reader can
be installed. Acrobat Reader or Adobe Reader need not be installed
if already installed on your computer.
Caution------------------------------------------------------------------------------------------
•
Do not install the software when the camera is connected to your computer with a USB
cable.
•
Administrator privileges are required for installation.
Note ----------------------------------------------------------------------------------------------
•
•
For details about Adobe Reader, see Help for Adobe Reader.
To install Irodio Photo & Video Studio alone, double-click “Irodio Photo & Video
Studio.exe” in the Irodio Photo & Video Studio folder.
•
Installation of Adobe Reader 9.1 requires MSI (Microsoft Windows Installer) version
3.1 or later and either Microsoft Internet Explorer 6.0 or later or Firefox 2.0 or later.
Microsoft Internet Explorer and Microsoft Windows Installer are available via Microsoft
Update.
9
210Download from Www.Somanuals.com. All Manuals Search And Download.
1
Start your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
Operating systems other than
Windows Vista
• The installer screen appears
automatically.
Windows Vista
• The Autorun screen appears
automatically.
• Select [Run Autorun.exe]. The installer screen appears automatically.
2
Click [Browse CD-ROM Content].
• The files on the CD-ROM are listed.
3
4
5
Double-click the [Adobe Reader] folder.
Double-click the [English] folder.
Double-click [AdbeRdr910_en_US_Std]
(AdbeRdr910_en_US_Std.exe).
• A screen appears to confirm user account management for Windows
Vista. Select [Continue].
6
Install Adobe Reader by following the messages
displayed.
Uninstalling the Software
Caution------------------------------------------------------------------------------------------
•
•
Administrator privileges are required.
If any other program is active or unsaved data remains, save the data and terminate
the program before uninstalling.
DC Software
9
1
Click [Start] on the Windows task bar.
2
Select [Settings]-[Control Panel] ([Control Panel] for
Windows XP/Windows Vista).
3
Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
Download from Www.Somanuals.com. All Manuals Search And Download.211
4
5
6
Select [DC Software], and then click the [Change/
Remove] button.
Confirm file deletion and click [OK].
• The [Shared File Detected] dialog box appears.
Select the [Don’t display this message again.] check
box, and then click [Yes].
• The uninstallation process begins. When it is finished, close the
displayed window.
Irodio Photo & Video Studio
1
Click [Start] on the Windows task bar.
2
3
4
5
Select [Settings]-[Control Panel] ([Control Panel] for
Windows XP/Windows Vista).
Double-click the [Add/Remove Programs] icon (or the
[Add or Remove Programs] icon in Windows XP).
Select [Irodio Photo & Video Studio] and then click
[Change/Remove].
Confirm file deletion and click [OK].
• The uninstallation process begins. When it is finished, close the
displayed window.
6
Restart your computer.
Downloading Images Using DL-10
After installing the software on your computer, connect your camera
to the computer.
1
Make sure the camera power is off.
9
2
Connect the USB cable to the
USB port of your computer.
212Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.
DL-10 starts and image
transfer begins automatically.
• DL-10 automatically creates a folder called [Digital Camera] inside
your [My Documents] folder. Downloaded images are saved in folders
with the date of each shot, inside the [Digital Camera] folder. (The files
will continue to be saved in the [Caplio] folder if you were previously
using Caplio Software.) Set the correct date and time on the camera
before shooting.
5
When image transfer is completed, disconnect the
camera and the computer. (G P.216)
Note ----------------------------------------------------------------------------------------------
If image transfer does not begin, please try the following procedures.
•
•
•
Click the [Save] button in the DL-10 window.
Restart your computer and perform Steps 1 to 5 again.
Confirm that the [Saves automatically when connected to USB] checkbox in the
[Option Settings] dialog box for DL-10 is selected.
Caution------------------------------------------------------------------------------------------
•
•
•
Do not force the USB cable into the terminal.
Do not apply excessive force with the USB cable connected.
When using the USB cable, do not move the camera with the USB cable.
Downloading Images Without Using DL-10
You can download images from the camera to a computer without
having to use software.
9
1
Make sure that the camera power is off.
2
Connect the accessory USB cable to a USB port of your
computer.
Download from Www.Somanuals.com. All Manuals Search And Download.213
3
4
Connect the USB cable to the USB
terminal of your camera.
• Your camera turns on.
Example of the display in
Windows XP
• Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
• After this preparation, the camera is displayed as a drive under [My
Computer].
From the displayed drive,
copy a file to the desired
location.
• The figure at right shows the
folder configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
Example of the display in
Windows XP
Caution------------------------------------------------------------------------------------------
•
•
Do not turn off the camera or disconnect the USB cable during image transfer.
If a file with the same name already exists at the destination, it is overwritten. If you
do not want the file to be overwritten, transfer data to another folder, or change the file
name of the file at the destination.
Note ----------------------------------------------------------------------------------------------
When an SD memory card is loaded, its files are displayed. Otherwise, files in the internal
memory are displayed.
9
214Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading Images from an SD Memory Card----------------------------------
It is possible to download images from an SD memory card to the computer via a PC card
slot or card reader. Depending on the type of PC card slot or card reader, a memory card
adapter may be required when using an SD memory card. If the SD memory card can be
used in the PC card slot, no memory card adapter is required.
•
Images are stored in an SD memory card in the hierarchy shown below.
Image files
Example of the display in Windows XP
Card Reader
This is a device connected to a computer to read the contents of cards. In addition to the
memory card adapter-type, there are card readers compatible with various types of
cards, into which you can directly load an SD memory card.
Use a card reader that is compatible with your computer’s operating system and the size
of the SD memory card.
Caution------------------------------------------------------------------------------------------
If you connect the camera or a card reader to a computer and then directly display, edit
or save SD memory card images on the computer, you may no longer be able to play
back the images on the camera. Download the images to the computer before displaying,
editing or saving them.
9
Download from Www.Somanuals.com. All Manuals Search And Download.215
Disconnecting the Camera from Your Computer
Before disconnecting the camera from the
computer, click the [Safely Remove
Hardware] or [Unplug or Eject Hardware]
icon in the taskbar (the illustration above shows the icon for
Windows XP) and select [Safely Remove USB Mass Storage
Device] or [Stop USB Mass Storage Device] from the menu that
appears. You can then disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
•
If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection before
removing the USB cable.
•
Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.
9
216Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh
Refer to P.204 for Windows.
This camera supports the following Macintosh operating systems.
• Mac OS 9.0 to 9.2.2
• Mac OS X 10.1.2 to 10.5.7
Caution------------------------------------------------------------------------------------------
VM-1 software can be installed on Macintosh computers as described on P.219. More
information is available in the “Software User Guide” (note that Acrobat Reader is
required to view the “Software User Guide” under Mac OS 9).
Downloading Images to Your Computer
1
Make sure that the camera power is off.
2
Connect the accessory USB
cable to a USB port of your
computer.
3
Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads
the file necessary for recognizing the
camera as a drive.
• After this preparation, the camera is
displayed as a drive on the Desktop.
9
Download from Www.Somanuals.com. All Manuals Search And Download.217
4
From the displayed drive,
copy a file to the desired
location.
• The figure below shows the folder
configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
Caution------------------------------------------------------------------------------------------
•
•
•
Do not force the USB cable into the terminal.
Do not apply excessive force with the USB cable connected.
When using the USB cable, do not move the camera with the USB cable.
Disconnecting the Camera from Your Computer
1
Drag and drop the displayed drive or the volume icon to
the “Trash”.
• If a screen appears prompting you to enter the administrator’s
password, enter the password.
2
Disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
•
You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu in Mac
OS X to cancel the connection.
•
If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection before
removing the USB cable.
•
•
Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.
When you connect your camera to a Macintosh computer, a file called “FINDER.DAT”
or “.DS_Store” may be created in your SD memory card, which will appear as
[Unmatched File] on your camera. You can delete this file from the SD memory card
if you wish.
9
218Download from Www.Somanuals.com. All Manuals Search And Download.
Using the MP File Viewer
When you shoot one still image with M-Cont Plus, Speed Cont, or
Multi-trgt AF, the image is recorded as one MP file.
By using the VM-1 MP file viewer, you can play back MP files on
your Macintosh computer and export still images.
This section explains how to install and uninstall the VM-1 software
included on the supplied CD-ROM. For details on how to play back
MP files on your computer or export still images from MP files using
the MP file viewer, see the “Software User Guide” available from the
supplied CD-ROM.
System Requirements for Using the Supplied CD-ROM
The following environments are necessary for using the supplied
CD-ROM.
Please check your computer, or the computer’s user manual.
Operating Systems Supported
Macintosh computer
Internal Memory
Mac OS X 10.4 to 10.5.7
Apple Inc. Macintosh Series
Mac OS X 10.4 256 MB or more
Mac OS X 10.5 512 MB or more
Hard Disk Available Memory
CD-ROM Drive
5 MB or more
A CD-ROM drive compatible with the above-mentioned
Macintosh computer
Note ----------------------------------------------------------------------------------------------
VM-1 supports Japanese, English, French and Chinese (Simplified).
Installing VM-1
1
Start your Macintosh computer and insert the supplied
CD-ROM in the CD-ROM drive.
2
3
4
Double-click the [RICOH] icon.
Double-click the [VM-1] folder.
9
Double-click the [VM-1 Installer.pkg] icon.
• The [Install VM-1] window is displayed.
5
Click [Continue].
• The window for selecting the installation location appears.
Download from Www.Somanuals.com. All Manuals Search And Download.219
6
7
Select the disk for installation, and then click
[Continue].
Click [Install].
• To change the installation location, click [Change Install Location...].
• To upgrade VM-1, click [Upgrade].
• The window for entering your name and password appears.
8
9
Enter your name and password, and then click [OK].
• A message appears to notify you that the installation is complete.
Click [Close].
Deleting (Uninstalling) VM-1
Caution------------------------------------------------------------------------------------------
•
If you have any other software applications running or data that has not been saved,
quit the other software applications and save the data before uninstalling VM-1.
If an error occurs during the uninstallation process, update your Mac OS to the latest
version.
•
1
Open the [Applications] folder.
Open the [Utilities] folder.
2
3
4
Open the [VM-1 Utility] folder.
Double-click the [VM-1 Uninstaller] icon.
• The uninstall confirmation window appears.
5
6
7
Click [OK].
• The window for entering your name and password appears.
Enter your name and password, and then click [OK].
• A message appears to notify you that the uninstallation is complete.
Click [OK].
9
220Download from Www.Somanuals.com. All Manuals Search And Download.
10 Appendices
Troubleshooting
Error Messages
If an error message is displayed on the screen, check the
information on the reference page and take the corresponding
action.
Error Message
Insert card.
Set date.
Refer to
No card is loaded. Insert a card.
The date is not set. Set the date.
P.26
P.194
The file number limit has been
exceeded.
The file number limit has been exceeded. Use another card. P.193
Unmatched File
This file cannot be displayed on the camera. Check the file
contents on your computer, and then delete the file.
-
Insufficient memory. Continue?
All the files cannot be copied because there is insufficient P.23
memory on the card. Use another card.
Protected
The file selected for deletion is protected.
P.154
P.24
-
Card Is Write-Protected.
The card is locked (write-protected). Unlock the card.
Print settings cannot be applied to This file (movie or other file) cannot be selected for printing.
this file.
Insufficient Memory
Files cannot be stored. Make sure there is sufficient memory P.52
or delete unwanted files.
P.168
P.169
The image print number limit has been exceeded. Select an P.202
image and set the number to 0.
Format internal memory.
Format card.
The internal memory requires formatting.
P.169
The card is not formatted. Format the card with this camera. P.168
Card Error
Reformat the card. If the error message still appears after P.168
that, the card may be faulty. Do not use the card.
Writing Data
Writing file to memory. Wait until writing finishes.
There are no files that can be played back.
-
-
File not found
Out of memory. cannot record.
The number of remaining shots is 0. Switch to another card P.23
or the internal memory.
No files to restore.
There are no files to restore.
P.162
10
Download from Www.Somanuals.com. All Manuals Search And Download.221
Camera Troubleshooting
Power Supply
Problem
Cause
Solution
Refer to
P.26
The camera does not
turn on.
Battery is not loaded or is
exhausted.
Load the rechargeable battery
correctly or charge the battery as P.25
required.
An unacceptable battery is used. Use the dedicated rechargeable P.22
battery. Never use any other
battery.
The camera is automatically turned Turn the camera back on.
off by auto power off.
P.28
P.26
-
The battery is loaded in wrong
direction.
Load correctly.
Because the camera overheated Wait until the temperature of the
the power was automatically
turned off.
camera returns to normal. Do not
attempt to cool the camera
suddenly.
The camera turns off
during use.
The camera was left unattended
and unused, so auto power off
turned it off.
Turn the camera back on.
P.28
Battery is running low.
Charge the rechargeable battery. P.25
An unacceptable battery is used. Use the dedicated rechargeable P.22
battery. Never use any other
battery.
The camera does not
turn off.
Camera malfunction.
Remove the battery and load it
again.
P.26
The battery has been
fully charged, but:
A (manganese dry cell or other)
unacceptable battery is used.
Use the dedicated rechargeable P.22
battery. Never use any other
battery.
•
The battery symbol is
displayed, indicating
a low battery level.
The camera turns off.
•
Cannot charge the
battery.
Battery has reached the end of its Replace with a new rechargeable P.26
useful life.
battery.
Battery runs out quickly. It is being used at extreme high or
low temperatures.
-
-
-
Many shots are being taken in dark
places or other location requiring
extensive use of flash.
-
10
222Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting
Problem
Cause
Solution
Refer to
The camera does not
shoot even if you press
the shutter release
button.
Battery is exhausted.
The camera is not on.
Charge the rechargeable battery. P.25
Press the POWER button to turn P.28
the camera on.
The camera is in playback mode. Press the 6(Playback) button P.46
to select the shooting mode.
The shutter release button is not Press the shutter release button P.34
pressed all the way.
all the way.
The SD memory card is not
formatted.
Format the card.
P.168
The SD memory card is full.
Load a new card, or delete
unwanted files.
P.26
P.52
The SD memory card has reached Load a new SD memory card.
the end of its useful life.
P.26
The flash is charging.
Wait until the flash mode symbol P.43
stops blinking.
The SD memory card is locked.
Unlock the card.
P.24
-
The contact surface of the SD
memory card is dirty.
Wipe with a soft, dry cloth.
Unable to view the shot The image confirmation time is too Lengthen the image confirmation P.182
image. short. time.
Images do not appear The camera is not on or the picture Turn the camera on or adjust the P.28
on the picture display. display is dark. brightness of the picture display. P.170
The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable.
The screen display is in Press the DISP. button to change P.56
synchro-monitor mode.
Although the camera is The lens is dirty.
-
the display.
Wipe clean with a soft, dry cloth.
-
set to auto focus, it is
unable to focus.
The subject is not in the center of Shoot with focus lock.
the shooting range.
P.34
It is a hard-to-focus subject.
Shoot with focus lock or manual P.34
focus.
P.105
Although the camera is The camera incorrectly focused
not in focus, the green because the distance to the
Shoot with macro mode or move P.41
away from the subject.
frame appears in the
center of the picture
display.
subject is too close.
The picture is blurred.
(The J symbol
appears.)
You moved the camera when
pressing the shutter release
button.
Hold the camera with your elbows P.32
pressed against your body.
Use a tripod.
P.121
Use the camera shake correction
function.
10
When shooting in a dark place
(such as indoors), the shutter
speed slows down and pictures
become easily blurred.
Use the flash.
Raise the ISO setting.
Use the camera shake correction P.121
function.
P.43
P.128
Download from Www.Somanuals.com. All Manuals Search And Download.223
Problem
Cause
Solution
Refer to
The flash does not fire or The flash cannot be used in the
the flash cannot charge. following cases:
To shoot with the flash, change P.43
the settings or mode.
P.112
P.108
P.87
•
•
•
•
In bracket shoting
In continuous mode
In movie mode
P.94
P.74
In discreet mode
In some scene modes, the flash is
disabled by default.
The flash is set to flash off.
Battery is running low.
Cancel Flash Off.
P.43
Charge the rechargeable battery. P.25
Even though the flash
The distance to the subject
Get closer to your subject and P.43
fired, the picture is dark. exceeds the flash range.
shoot. Change the flash mode or P.128
the ISO setting.
The subject is dark.
Correct the exposure. (Exposure P.124
compensation also changes the
light intensity of the flash.)
The light intensity of the flash is not Adjust the light intensity of the
P.111
appropriate.
flash.
The image is too bright. The light intensity of the flash is not Adjust the light intensity of the
P.43
appropriate.
flash. Alternatively, move a little P.111
away from the subject or
illuminate the subject with
another light source instead of
using the flash.
Subject is overexposed.
(The [!AE] symbol appears.)
Correct the exposure.
Cancel exposure time.
P.124
P.117
The brightness of the picture
display is not appropriate.
Adjust the brightness of the
picture display.
P.170
The image is too dark. The shot was taken in a dark place Cancel Flash Off.
while set to flash off.
P.43
The subject is underexposed.
Correct the exposure.
Set to long exposure time.
P.122
P.117
The brightness of the picture
display is not appropriate.
Adjust the brightness of the
picture display.
P.170
The image lacks natural The picture was shot in conditions Add a white object to the
P.126
color.
that made it difficult for auto white composition or use a white
balance to adjust the white
balance.
balance setting other than auto.
The date or recording
information does not
appear on the screen.
The screen display function is set Press the DISP. button to change P.56
to no display. the display.
The brightness of the
You are using AF in a dark place or This is normal.
-
picture display changes when the auto focus range and
10
during AF.
surrounding brightness are
different.
224Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
The level indicator is not [Level Setting] is set to [Off] or
displayed. [Sound].
Cause
Solution
Refer to
Set [Level Setting] to [Display] or P.187
[Display+Sound].
The display is set to a setting other Press the DISP. button to change P.56
than normal symbol display or
histogram.
the display to normal symbol
display or histogram.
The camera is upside down
(shutter release button is on the
bottom).
Hold the camera correctly.
-
The image is tilted even You shot the image while moving, Shoot in an environment that is
-
-
though it was shot with such as on a amusement ride.
not moving.
the level indicator in the
middle or while the level
sound was sounding.
The subject is not level.
Check the subject.
Self timer lamp does not [Discreet Mode] is selected in
light. scene mode.
Choose another mode.
P.74
10
Download from Www.Somanuals.com. All Manuals Search And Download.225
Playback/Deleting
Problem
Cause
Solution
Refer to
Cannot play back, or the The camera is not in playback
Press the 6(Playback) button. P.46
playback screen does
not appear.
mode.
The VIDEO/AV cable is not
connected properly.
Reconnect it properly.
P.163
P.196
-
The Video Out Mode setting is
incorrect.
Set it to the correct format.
The contents of the SD No SD memory card is loaded, or Load a card with stored images.
memory card cannot be an SD memory card with no stored
played back, or the
playback screen does
not appear.
images is loaded.
You played back an SD memory Load a card that was formatted P.26
card that was not formatted with
this device.
and recorded with this device.
P.168
-
You played back an SD memory Load a normally recorded card.
card that was not recorded
normally.
The contact surface of the SD
memory card is dirty.
Wipe with a soft, dry cloth.
-
-
There is something wrong with the Play back images from another
SD memory card.
card and if there is nothing wrong
with the card, the camera is okay.
There may be something wrong
with the card, so do not use it.
The picture display
turned off.
Battery is running low.
Charge the rechargeable battery. P.25
Turn the camera back on. P.28
The camera was left unattended
and unused, so auto power off
turned it off.
Part of the screen
flashes in black.
The screen is highlighted due to an It is recommended that you shoot P.57
overly bright area.
another image while avoiding
direct sunlight and setting the
exposure level lower (-).
P.124
A file cannot be deleted. The file is protected.
The SD memory card is locked.
The SD memory card is locked.
Unprotect the file.
Unlock the card.
Unlock the card.
P.154
P.24
P.24
Cannot format the SD
memory card.
10
226Download from Www.Somanuals.com. All Manuals Search And Download.
Other Problems
Problem
Cause
Solution
Refer to
P.26
Cannot load the SD
memory card.
The card is facing the wrong way. Load correctly.
The camera does not
operate even when the
buttons are pressed.
Battery is running low.
Camera malfunction.
Charge the rechargeable battery. P.25
Press the POWER button to turn P.28
the camera off, and then press
the POWER button to turn the
camera on again.
Remove the battery and load it
again.
P.26
The date is incorrect.
The correct date/time are not set. Set the correct date/time.
P.194
The set date
disappeared.
The battery was removed.
If the battery is removed for more P.194
than one week, the date setting
will be lost. Make the settings
again.
Auto power off does not Auto power off is set to [Off].
work.
Set the time for auto power off.
P.183
The operation sound
cannot be heard.
[Discreet Mode] is selected in
scene mode.
Choose another mode.
P.74
The operation sound volume is
turned off.
Use [Volume Settings] to set the P.181
volume to a setting other than
mute.
Images do not appear The [Video Out Mode] setting is
Set it to the correct format.
P.196
on the TV.
incorrect.
The AV cable is not connected.
Connect the AV cable properly. P.163
The TV is not correctly set to
VIDEO IN.
Check that the TV is correctly set
to VIDEO IN.
-
10
Download from Www.Somanuals.com. All Manuals Search And Download.227
Software and Computer Troubleshooting
For details about the software, refer to the “Software User Guide”
(PDF file).
Warning Messages Under Windows XP Service Pack 3
and Windows Vista Service Pack 2
When software for your Ricoh digital camera is used on a computer
with Windows XP Service Pack 3 or Windows Vista Service Pack 2
installed, the following warning message may appear at software
activation or USB connection. With this in mind, refer to the
following.
Here is an example of the Windows XP screen.
When this warning message is displayed:
1
Check the information provided
on the message screen to make
sure that it comes from a
reputable source, and then click
the [Unblock] button.
Caution------------------------------------------------------------------------------------------
If you do not recognize the program, you should block it because it may be a virus. Click
the [Keep Blocking] button to prevent the program from connecting to the Internet.
If you clicked the [Keep Blocking] button:
Follow the steps below to check the Windows Firewall settings.
1
Open the [Windows Firewall]
Control Panel.
• Open the [Start] menu and select
[Control Panel], then double-click
[Windows Firewall] (if Windows Firewall
is not listed,click [Switch to Classic
View] at the top left corner of the Control
Panel window).
10
228Download from Www.Somanuals.com. All Manuals Search And Download.
2
Allow the Ricoh application
Internet access.
• In the [Windows Firewall] dialog,click
the [Exceptions] tab and check
whether DL-10 is listed under
[Programs and Services]. If it is, place
a check in the check box next to DL-10
and click OK. If it is not listed,click [Add
Program…] to add DL-10 to the list of
exceptions.
If you clicked the [Ask Me Later] button:
Each time the program is activated, the [Windows Security Alert]
dialog box appears. Then you can select [Unblock].
10
Download from Www.Somanuals.com. All Manuals Search And Download.229
Specifications
No. of effective pixels (camera) Approx. 9.29 million effective pixels
Image Sensor
Lens
1/2.3" CMOS (Approx. 10.29 total million pixels)
Focal Length
F-aperture
4.9 mm to 52.5 mm (equivalent to 28 mm to 300 mm on a 35-mm camera)
F3.5 to F5.6
Shooting
Distance
Normal shooting: Approx. 30 cm to A (Wide-angle) or 1.5 m to A
(Telephoto) (from the front of the lens)
Macro shooting: Approx. 1 cm to A (Wide-angle), 28 cm to A
(Telephoto) or 1 cm to A (Zoom macro mode) (from the front of the lens)
Lens
10 elements in 7 groups (4 aspherical lens elements with 5 surfaces)
Construction
Zoom Magnification
Optical zoom at 10.7×, Digital zoom at 4.8×, Auto resize zoom at approx.
5.4× (VGA image)
Focus Modes
Multi AF (Contrast AF method)/Spot AF (Contrast AF method)/Continuous
AF/Multi-trgt AF/MF/Snap/A (with AF Auxiliary Light)
Antiblur Function
Image Sensor Shift Image Stabilizer
Shutter
Speed
Still Image
8, 4, 2, 1 to 1/2000 seconds (The upper and lower limits differ for each
shooting mode and flash mode.)
Movie
1/30 to 1/2000 seconds
Exposure
Control
Exposure
Metering Mode Metering
Multi Light Metering (256 segments)/Center-weighted Light Metering/Spot
Exposure Mode Program AE
Exposure
Manual exposure compensation (+2.0 to -2.0 EV in 1/3 EV Steps),
Compensation Auto bracket function (–0.5 EV, ±0, +0.5 EV)
ISO Sensitivity
Auto/Auto-Hi/ISO 80/ISO 100/ISO 200/ISO 400/ISO 800/ISO 1600
(Standard Output Sensitivity)
White Balance Mode
Auto/Multi-pattern Auto/Outdoors/Cloudy/Incandescent Lamp/
Incandescent Lamp 2/Fluorescent Lamp/Manual Settings, White balance
bracket function
Flash
Flash Mode
Auto flash (fires automatically in low-light conditions and when the subject
is backlit)/Red-eye Flash/Flash On/Flash Synchro./Flash Off
Built-in flash
Range
Approx. 20 cm to 3.0 m (Wide-angle), approx. 28 cm to 4.0 m (Telephoto)
(ISO Auto/ISO 800, from the front of the lens)
Flash
±2.0EV (1/3 EV Steps)
Compensation
Picture Display
Shooting Mode
3.0" Transmissive LCD, approx. 920,000 dots
Auto shooting mode/Easy shooting mode/Scene mode (Portrait/Sports/
Night. Port./Landscape/Nightscape/High Sens/Discreet Mode/Zoom Macro/
High Contrast B&W/Miniaturize/Skew Correct Mode/Text Mode)/My Settings
Mode/Movie Mode/Dynamic Range Double Shot Mode/Continuous Mode
Picture Quality Mode*1
F (Fine), N (Normal)
10
Number of Still Image
Recorded
3456 × 2592, 3456 × 2304, 2592 × 2592, 3072 × 2304, 2592 × 1944,
2048 × 1536, 1280 × 960, 640 × 480
Pixels
Multi-Picture
3456 × 2592, 3456 × 2304, 2592 × 2592, 3072 × 2304, 2592 × 1944,
2048 × 1536, 1728 × 1296, 1280 × 960, 640 × 480
Movie
Text
640 × 480, 320 × 240
3456 × 2592, 2048 × 1536
230Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Media
SD memory card, SDHC memory card (up to 32 GB), Internal Memory
(approx. 88 MB)
Recording 3456 × 2592
N: approx. 1959 KB/Screen, F: approx. 3376 KB/Screen
F: approx. 3002 KB/Screen
Data
Capacity
3456 × 2304
2592 × 2592
F: approx. 2538 KB/Screen
3072 × 2304
2592 × 1944
N: approx. 1573 KB/Screen
N: approx. 1155 KB/Screen
2048 × 1536
N: approx. 767 KB/Screen
1728 × 1296
N: approx. 581 KB/Screen
1280 × 960
N: approx. 452 KB/Screen
640 × 480
N: approx. 110 KB/Screen
Recording Still Image
JPEG (Exif Ver. 2.21)*2
File Format
Multi-Picture
Compliant with CIPA DC-007-2009 Multi Picture Format
AVI (Open DML Motion JPEG Format Compliant)
JPEG Baseline Format Compliant (Still image, movie)
Movie
Compression
Format
Other Major Shooting
Functions
Continuous mode, Self-timer (operation time: approx. 10 seconds, approx.
2 seconds, Custom), Interval shooting (shooting interval: 5 seconds to 1
hour, in increments of 5 seconds)*3, Color bracket, Focus bracket, AE/AF
target shift, Histogram display, Grid guide display, Electronic level
Other Major Playback
Functions
Thumbnail view, Enlarged view (maximum ×16), Resize, Level
Compensation, White Balance Compensation, Skew Correction, Trim,
Flag Function, Slideshow, DPOF
Interface
USB2.0 (High-Speed USB) Mini-B, Mass storage-compatible*4, AV output
1.0Vp-p (75 Ω)
Video Signal Format
Power Supply
NTSC, PAL
Rechargeable Battery (DB-70): 3.6 V
Battery Consumption*5
Usage time of DB-70: approx. 290 pictures
(When [LCD Auto Dim] is set to [On]*6)
Dimensions
Weight
101.5 mm (W) × 58.3 mm (H) × 29.4 mm (D) (excluding projecting parts)
Camera: approx. 185 g (excluding battery, SD memory card, and strap)
Accessories: approx. 23 g (battery and strap)
Tripod Hole Shape
Date Maintain Time
Operating Temperature
Operating Humidity
Storage Temperature
1/4-20UNC
Approx. 1 week
0°C to 40°C
85% or less
-20°C to 60°C
*1 The picture quality mode that can be set varies depending on the image size.
*2 Compatible with DCF and DPOF. DCF is the abbreviation for “Design rule for Camera File system,” a
JEITA standard. (Full compatibility with other devices is not guaranteed.)
*3 When the flash is set to [Flash Off].
*4 Mass storage mode is supported by Windows 2000, Windows XP, Windows Vista, Mac OS 9.0 - 9.2.2,
and Mac OS X 10.1.2 - 10.5.7.
10
*5 The number of remaining shots is based on the CIPA standard and may vary depending on usage
conditions. This is for reference only.
*6 You can take approximately 270 shots when [LCD Auto Dim] is set to [Off].
Download from Www.Somanuals.com. All Manuals Search And Download.231
Number of Images That Can Be Stored
The following table shows the approximate number of images that
can be recorded in the internal memory and onto an SD memory
card at various image size and picture quality settings.
Picture Quality/ Internal
Mode
1 GB
2 GB
4 GB
8 GB
16 GB 32 GB
Size
Memory
F3456(9M)
N3456(9M)
F3:2(8M)
24
42
27
33
53
72
109
175
705
23
39
26
31
48
64
90
133
312
266
457
299
353
570
775
539
931
608
714
1058 2163 4335 8695
1828 3737 7487 15020
1195 2442 4893 9815
1403 2868 5746 11527
5
SCENE
(other than
Text Mode)
EASY
F1:1(6M)
N3072(7M)
N2592(5M)
N2048(3M)
N1280(1M)
N640(VGA)
F3456(9M)
N3456(9M)
F3:2(8M)
1159 2277 4654 9324 18704
1576 3094 6325 12671 25418
R
(Continuous
Mode)
Q
1184 2363 4640 9486 19005 38125
1888 3840 7541 15415 30882 61951
7553 15359 30159 61643 123489 247716
255
425
285
333
521
686
974
516
865
579
675
1014 2073 4152 8330
1699 3474 6960 13962
1138 2327 4662 9352
1326 2710 5430 10893
5
(When
[Focus] is
set to [Multi-
trgt AF])
F1:1(6M)
N3072(7M)
N2592(5M)
N2048(3M)
N1280(1M)
N640(VGA)
1059 2080 4253 8520 17091
1397 2743 5606 11231 22529
1981 3892 7956 15940 31976
1438 2926 5746 11745 23530 47202
3357 6827 13407 27404 54898 110125
SCENE
(Text Mode)
3456 × 2592 42
2048 × 1536 109
457
931
1828 3737 7487 15020
1184 2363 4640 9486 19005 38125
18 min 37 min 76 min 149min 299min 601min
640 × 480
1 min
3
(15 Frames/Sec) 42 s
20 s
9 min 18 min 38 min 75 min 151min 303min
15 s 49 s 41 s 31 s 18 s 31 s
46 min 94 min 193min 378min 757min 1519 min
19 s 11 s 41 s 2 s 18 s 7 s
23 min 48 min 99 min 193min 387min 777min
17 s
41 s
40 s
50 s
28 s
640 × 480
51 s
(30 Frames/Sec)
320 × 240
4 min
(15 Frames/Sec) 19 s
320 × 240 2 min
(30 Frames/Sec) 12 s
42 s
13 s
8 s
30 s
39 s
37 s
R
(M-Cont
N3456(9M)
N1728(2M)
N640(VGA)
42
457
931
1828 3737 7487 15020
10
Plus(9M))
R
(M-Cont
143
705
1548 3072 6033 12332 24706 49561
7553 15359 30159 61643 123489 247716
Plus(2M))
R
(Speed Cont)
232Download from Www.Somanuals.com. All Manuals Search And Download.
Note ----------------------------------------------------------------------------------------------
•
The maximum recording time is the estimated total recording time. The maximum
recording time per shooting is 90 minutes or the equivalent of 4 GB.
The maximum number of consecutive shots that can be taken using continuous mode
is 999. When the number of remaining shots is 1000 or more, “999” is displayed on
the picture display.
•
•
•
The maximum numbers of shots for M-Cont Plus (2M)/M-Cont Plus (9M) and Speed
Cont are the estimated total numbers of shots that can be recorded. The maximum
number of shots that can be taken consecutively at one time is 30 for M-Cont Plus
(2M) and 15 for M-Cont Plus (9M) and 120 for Speed Cont.
The maximum number of shots for Multi-trgt AF is the estimated total number of shots
that can be recorded. The number of shots that can be recorded at one time is 7.
When the number of remaining shots is 9999 or more, “9999” is displayed on the
picture display.
•
•
The number of remaining shots displayed on the picture display may differ from the
actual number of shots, depending on the subject.
Movie recording time and the maximum number of still pictures may vary depending
on the capacity of the recording destination (internal memory or SD memory card),
shooting conditions, and the type and manufacturer of the SD memory card.
A high speed memory card is recommended when shooting for long periods.
•
10
Download from Www.Somanuals.com. All Manuals Search And Download.233
Defaults Settings/Functions Whose
Defaults Are Restored When the
Camera Is Turned Off
Turning the camera off may reset some function settings to their
defaults.
The table below indicates whether or not the function is reset to its
default when the camera is turned off.
O : setting is saved × : setting is reset
Function
Default Settings
Shooting
Picture Quality/Size
Density
Size (Text Mode)
Movie Size
Frame Rate
Focus
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
N3456(9M)
Normal
3456 (9M)
640
30 Frames/Sec
Multi AF
Off
Multi
Standard
0.0
AUTO
Off
Off
Off
Pictures: 2 Pics,
Interval: 5 Sec
0 Sec.
On
Off
Off
Pre-AF
Exposure Metering
Image Settings
Flash Exposure Compensation
Dynamic Range Expansion
Plus Normal Shooting
Auto Bracket
Time Exposure
Custom Self-Timer
Interval Shooting
Camera Shake Correction
Slow Shutter Limit
Date Imprint
Exposure Compensation
White Balance
ISO Setting
Macro
Flash
Self-Timer
Volume Adjustment
×
O
O
O
O
O
O
O
O
×
0.0
Multi-P AUTO
Auto
Macro Off
Auto
Self-Timer Off
-
10
Playback
O
234Download from Www.Somanuals.com. All Manuals Search And Download.
O : setting is saved × : setting is reset
Function
Default Settings
Setup
LCD Brightness
Reg. My Settings
Step Zoom
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
-
Off
Set Fn Button
Macro Target
Exposure Comp.
White Balance
ISO
Quality
AUTO 400
On
ADJ Button Setting 1
ADJ Button Setting 2
ADJ Button Setting 3
ADJ Button Setting 4
ISO Auto-High Settings
AF Auxiliary Light
Operation Sounds
Volume Settings
LCD Confirmation Time
Auto Power Off
All
ꢂ ꢂ ꢁ
(Medium)
0.5 seconds
5 Min.
On
LCD Auto Dim
Digital Zoom Image
Grid Guide Display Options
Level Setting
Shooting Info. Display Frame
Minimum Distance
Auto Rotate
Card Sequence No.
Date Settings
Language/N
Normal
Display
Off
Show
On
Off
-
(*1)
(*1)
Video Out Mode
(*1)
The default setting varies depending on where you purchased the camera.
10
Download from Www.Somanuals.com. All Manuals Search And Download.235
Using Your Camera Abroad
Battery Charger (Model BJ-7)
The battery charger can be used in regions with a current of 100-240V, 50Hz/60Hz.
If you are going to travel to a country that uses a different shaped wall outlet/plug, please
consult your travel agent on a plug adapter suitable for wall outlets in your country of
destination.
Do not use electrical transformers. It may damage the camera.
Warranty
This product was manufactured for use in the country in which it was purchased. The
warranty is only valid in the country in which the camera was purchased.
Should the product fail or malfunction while you are abroad, the manufacturer assumes no
responsibility for servicing the product locally or bearing the expenditure incurred therefore.
Playback on Television in Other Regions
Playback is possible on televisions (or monitors) equipped with a video input terminal. Please
use the AV cable provided.
This camera is compatible with both NTSC and PAL television formats. Set the video format
on the camera to match that of the television you are using.
When you go abroad, set your camera to the local video format.
10
236Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions on Use
Cautions on Use
• This product was manufactured for use in the country in which it was
purchased. The warranty is only valid in the country in which the camera
was purchased.
• Should the product fail or malfunction while you are abroad, the
manufacturer assumes no responsibility for servicing the product locally or
bearing the expenditure incurred therefore.
• Be sure not to drop or apply any sudden force to the camera.
• While you are carrying the camera, be careful not to hit it against other
objects. Take special care to not hit the lens and picture display.
• Firing the flash consecutively may heat the firing unit. Do not fire it
consecutively more than necessary.
• Do not touch the flash and keep foreign objects away from the firing unit.
Doing so can cause burns and fires.
• Do not fire the flash near eyes. It could cause visual impairment (particularly
for infants).
• Do not fire the flash near the driver of a vehicle to avoid causing accidents.
• The battery may become hot after extended use. Touching the battery
immediately after use could result in burns to your fingers.
• If the picture display or panel is exposed to sunlight, they may become
washed out and images may become hard to view.
• The picture display and panel may contain some pixels that do not remain
lit up continually in part or at all. Also, the brightness may become uneven
because of the characteristics of LCDs. These are not failures.
• Do not forcefully press the surface of the picture display.
• In an environment where the temperature changes suddenly, condensation
may occur in the camera, resulting in troubles such as fogging of the glass
surface or malfunctions of the camera. If this occurs, place the camera in a
bag to slow the temperature change as much as possible. Take it out of the
bag after the temperature difference from the atmosphere has decreased to
a fairly small amount. If condensation occurs, remove the battery and
memory card, and wait until the moisture has dried before using the
camera.
• To avoid damaging the connectors, do not put any objects into the camera’s
microphone or speaker holes.
10
• Do not get the camera wet. Do not operate the camera with wet hands. This
can result in malfunction or an electrical shock.
• Before taking any important pictures (such as at weddings, on trips abroad,
etc.), test the camera to check operation and ensure proper functioning. We
recommend that you keep this manual and spare battery on hand.
Download from Www.Somanuals.com. All Manuals Search And Download.237
Conditions in which condensation may easily occur:--------------------------
•
•
•
When the camera is moved to an environment where the temperature differs greatly.
In humid places.
In a room immediately after being heated, or when the camera is exposed directly to
cooled air from an air-conditioner or another similar appliance.
10
238Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Storage
Care
• Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will
suffer.
• When dust or dirt does get on the lens, do not touch it directly with your
fingers, and either use a blower (available in stores) to blow it off, or a soft
cloth to gently dust it off.
• After use at the beach or around chemicals, wipe it off particularly carefully.
• In the unlikely event that your camera fails to work properly, please consult
your Ricoh Repair Center.
• There are high voltage circuits in this camera. As this is dangerous, do not
dismantle this camera under any circumstances.
• Do not get volatile substances, such as thinner, benzene, or pesticides on
your camera. This may cause a change in quality, paint to peel, etc.
• As the surface of the picture display is easily scratched, do not rub hard
objects against it.
• Clean the surface of the picture display by wiping gently with a soft cloth
containing a small amount of display cleaner (that does not contain organic
solvents) sold in stores.
Use and Storage
• Please avoid using or storing your camera in the following kinds of places,
as this may damage the camera.
In high heat and humidity, or where there is severe change in
temperature or humidity.
Places with a lot of dust, dirt or sand.
Places with severe vibration.
Places where it is in direct contact with vinyl or rubber products or
chemicals, including mothballs or other insect repellent, for long periods
of time.
Places with strong magnetic fields (near a monitor, transformer, magnet,
etc.).
• Remove the battery if you are not going to use the camera for a long period
of time.
Precautions regarding care of your camera
1. Be sure to turn the power off.
10
2. Remove the batteries before caring for your camera.
Download from Www.Somanuals.com. All Manuals Search And Download.239
Warranty and Servicing
1. This product is backed by a limited warranty. During the warranty period mentioned in
the Warranty supplied with your camera, any defective parts will be repaired free of
charge. In the event of a camera malfunction, contact the dealer from which you
purchased the camera or your nearest Ricoh Repair Center. Please note that you will
be not be reimbursed for the cost of bringing the camera to the Ricoh Repair Center.
2. This warranty does not cover any damage resulting from:
1 failure to follow the instructions in the instruction manual;
2 repair, modification or overhaul not conducted by an authorized service center
listed in the instruction manual;
3 fire, natural disaster, act of God, lightning, abnormal voltage, etc.;
4 improper storage (noted in the “Camera User Guide”), leaking of battery and other
fluids, mold, or otherwise insufficient care of the camera.
5
submergence in water (flooding), exposure to alcohol or other beverages, infiltration
of sand or mud, physical shock, dropping of the camera, or pressure on the camera,
and other unnatural causes.
3. After the warranty period has passed, you will be liable for all repair fees, including
those incurred at an authorized service center.
4. You will be liable for all repair fees, even within the warranty period, if the warranty card
is not attached or if the distributor’s name or the purchase date have been changed or
are not indicated on the card.
5. Expenses for overhaul and thorough inspection by special request of the customer will
be charged to the customer, whether or not they are incurred during the warranty period.
6. This warranty only applies to the camera and not to the accessories, such as the case
and strap, nor does it apply to the battery and other consumables provided.
7. Any consequential damages arising from failure of the camera, such as expenses
incurred in taking pictures or loss of expected profit, will not be reimbursed whether
they occur during the warranty period or not.
8. The warranty is only valid in the country in which the camera was purchased.
*
The above provisions refer to repairs offered free of charge, and do not limit your
legal rights.
*
The intention of the above provisions is also described in the warranty card
provided with this camera.
9. Parts essential to the servicing of the camera (that is, components required to maintain
the functions and quality of the camera) will be available for a period of five years after
the camera is discontinued.
10. Please note that if the camera is seriously damaged by flooding, submergence,
infiltration of sand or mud, violent shocks or dropping, it may not be repairable, and
restoration to its original condition may be impossible.
Note ----------------------------------------------------------------------------------------------
•
Before sending the camera in for repair, check the battery and read the instruction
manual again to ensure proper operation.
•
•
Some repairs require a significant amount of time to be completed.
When sending the camera to a service center, please include a note which describes
the defective part and the problem as precisely as possible.
Remove all accessories not related to the problem before sending the camera to the
service center.
10
•
•
This warranty does not apply to data stored on an SD memory card or in internal
memory.
240Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION TO THE USER
USA FCC Part15 Class B
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, then
user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for connection to a
host computer in order to comply with FCC emission limits. (FCC 15.27)
An AC adapter with a ferrite core must be used for RF interference suppression.
COMPLIANCE INFORMATION STATEMENT
Product Name: DIGITAL CAMERA
Model Number: CX2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RICOH AMERICAS CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899
Note to Users in Canada
Note: This Class B digital apparatus complies with Canadian ICES-003
Remarque Concernant les Utilisateurs au
Canada
Avertissement : Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
10
Download from Www.Somanuals.com. All Manuals Search And Download.241
Density.........................................82
Digital Zoom.................................40
Digital Zoom Image....................185
Direct Print .................................197
Discreet Mode..............................74
DISP. Button ..........................16, 56
DL-10 .................................204, 206
DPOF.........................................159
Dynamic Range Double Shot Mode
..................................................84
Dynamic Range Expansion..........85
Index
A
ADJ Button Setting 1, 2, 3, 4..... 176
ADJ./OK Button............. 16, 62, 131
AE Lock....................................... 68
AE/AF Target Shift ...................... 64
AF Auxiliary Light ................ 15, 179
Auto Bracket.............................. 112
Auto Focus (AF) ........................ 103
Auto Power Off.................... 29, 183
Auto Resize............................... 185
Auto Rotate ............................... 191
Auto Shooting Mode.................... 34
AV Cable ............................. 12, 163
AV Output Terminal............. 16, 163
AVI file......................................... 94
E
Easy Shooting Mode (EASY).......37
Enlarged View..............................50
Error Messages..........................221
Export Still Images.....................134
Exposure Compensation............124
Exposure Metering.....................108
F
B
Flag Function Display ................142
Flag Function Setting.................140
Flash ................................15, 16, 43
Flash Exposure Compensation
................................................111
Fn (Function) Button ..............16, 66
Focus .........................................103
Focus Bracket (FOCUS-BKT)....115
Format [Card].............................168
Format [Internal Memory]...........169
Frame Rate..................................95
Backlighting............................... 124
Battery......................................... 22
Battery Charger..................... 12, 25
Battery Level Indication............... 21
Battery/Card Cover................ 16, 26
C
Camera shake..................... 33, 121
Camera Shake Correction......... 121
Card Reader.............................. 215
Card Sequence No.................... 193
CD-ROM.............................. 13, 206
Charging...................................... 25
Color Bracket (CL-BKT) ............ 114
Continuous Mode ........................ 87
Copy to Card from Internal Memory
............................................... 158
Custom Self-Timer .................... 118
G
Grid Guide Display.......................56
Grid Guide Display Options .......188
H
Handstrap ....................................12
High Contrast B&W......................75
High Sens ....................................74
Histogram Display........................60
D
Date Imprint............................... 123
Date Settings....................... 31, 194
DC Software.............................. 211
Delete.......................................... 52
Delete Button......................... 16, 52
I
Image Settings...........................109
Internal Memory.....................23, 47
242Download from Www.Somanuals.com. All Manuals Search And Download.
Interval Shooting ....................... 119
Irodio Photo & Video Studio
............................... 206, 210, 212
ISO Auto-High Settings ............. 178
ISO Setting................................ 128
P
PictBridge...................................197
Picture display........................16, 18
Picture Quality/Size....................101
Playback Button.....................16, 46
Playback Menu ..........................138
Playback Mode ......................28, 46
Plus Normal Shooting ..................86
Portrait ...................................74, 77
POWER Button............................15
Pre-AF........................................107
Printing.......................................197
Protect........................................154
L
Landscape................................... 74
Language/N .................... 30, 195
LCD Auto Dim ........................... 184
LCD Brightness ......................... 170
LCD Confirmation Time............. 182
Lens............................................. 15
Lens Cover.................................. 15
Level Compensation.................. 147
Level Indicator..................... 58, 187
Level Setting........................ 58, 187
R
Rechargeable Battery
................................12, 22, 25, 26
Recover File...............................162
Reg. My Settings........................171
Resize........................................143
Restore Defaults ........................130
M
Macro .................................... 16, 41
Macro Target................. 66, 67, 174
Manual Focus (MF) ................... 105
M-Cont Plus (2M) ........................ 90
M-Cont Plus (9M) ........................ 88
MENU Button ...... 16, 100, 139, 166
Microphone.................................. 15
Miniaturize............................. 75, 79
Minimum Distance..................... 190
Mode Dial .............................. 15, 17
Movie Mode................................. 94
Movie Size................................. 101
MP File ........................ 92, 104, 132
Multi-trgt AF............................... 104
My Settings Mode (MY)............... 83
S
Scene Mode (SCENE).................74
SD Memory Card .............23, 26, 47
Self-Timer ....................................45
Self-timer Button ....................16, 45
Self-Timer Lamp ....................15, 45
Set Fn Button.............................174
Setup Menu................................165
Shooting Info. Display Frame.....189
Shooting Menu.............................97
Shutter Release Button..........15, 32
Skew Correct Mode ...............75, 81
Skew Correction.........................152
Slide Show.................................157
Slow Shutter Limit......................122
Speaker................................16, 131
Speed Cont..................................92
Sports...........................................74
Step Zoom .................................173
Synchro-Monitor Mode.................56
N
Night. Port. .................................. 74
Nightscape .................................. 74
Number of images that can be
stored ..................................... 232
Number of shots you can take..... 22
O
Operation Sounds ..................... 180
T
Text Mode....................................75
Download from Www.Somanuals.com. All Manuals Search And Download.243
Thumbnail View........................... 48
Time Exposure .......................... 117
Trim ........................................... 144
Tripod Screw Hole....................... 16
U
USB Cable
................. 12, 198, 212, 213, 217
USB Driver ................................ 206
USB Terminal
................. 16, 198, 213, 214, 217
V
Video Out Mode ........................ 196
VM-1.................................. 219, 220
Volume Settings ........................ 181
W
White Balance ........................... 126
White Balance Bracket
(WB-BKT)............................... 113
White Balance Compensation... 150
White Saturation Highlights
Display ..................................... 57
WIA Driver................................. 206
Z
Zoom ........................................... 39
Zoom Lever ........................... 15, 39
Zoom Macro .......................... 74, 78
244Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Support Numbers in Europe
UK
(from within the UK)
02073 656 580
(from outside of the UK)
+44 2073 656 580
Deutschland
France
Italia
(innerhalb Deutschlands)
(außerhalb Deutschlands)
06331 268 438
+49 6331 268 438
(à partir de la France)
(en dehors de la France)
0800 88 18 70
+33 1 60 60 19 94
(dall’Italia)
02 696 33 451
(dall’estero)
+39 02 696 33 451
España
(desde España)
91 406 9148
(desde fuera de España)
+34 91 406 9148
http://www.service.ricohpmmc.com/
Download from Www.Somanuals.com. All Manuals Search And Download.
From environmental friendliness to environmental
conservation and to environmental management
Ricoh is aggressively promoting environment-
friendly activities and also environment
conservation activities to solve the great subject of
management as one of the citizens on our
precious earth.
To reduce the environmental loads of digital
cameras, Ricoh is also trying to solve the great subjects of “Saving energy by reducing power
consumption” and “Reducing environment-affecting chemical substances contained in products”.
If a problem arises
First of all, see “Troubleshooting” (
G
P.221) in this manual. If the issues still persist, please contact a Ricoh office.
Ricoh Offices
RICOH COMPANY, LTD.
3-2-3, Shin-Yokohama Kouhoku-ku, Yokohama City, Kanagawa 222-8530, Japan
http://www.ricoh.com/r_dc/
RICOH AMERICAS CORPORATION
5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.
1-800-22RICOH
http://www.ricoh-usa.com/
RICOH INTERNATIONAL B.V. (EPMMC) Oberrather Str. 6, 40472 Düsseldorf, GERMANY
(innerhalb Deutschlands) 06331 268 438
(außerhalb Deutschlands) +49 6331 268 438
http://www.ricohpmmc.com/
RICOH UK LTD. (PMMC UK)
(from within the UK)
(from outside of the UK) +44 2073 656 580
RICOH FRANCE S.A.S. (PMMC FRANCE) (à partir de la France) 0800 88 18 70
(en dehors de la France) +33 1 60 60 19 94
(desde España) 91 406 9148
(desde fuera de España) +34 91 406 9148
02073 656 580
RICOH ESPANA, S.A. (PMMC SPAIN)
RICOH ITALIA S.p.A. (PMMC ITALY)
(dall’Italia)
02 696 33 451
(dall’estero)
+39 02 696 33 451
RICOH ASIA PACIFIC OPERATIONS LIMITED 21/F, One Kowloon, 1 Wang Yuen Street, Kowloon Bay, Hong Kong
About Irodio Photo & Video Studio
North America (U.S.)
Europe
(Toll Free) +1-800-458-4029
UK, Germany, France and Spain: (Toll Free) +800-1532-4865
Other Countries: +44-1489-564-764
Asia
+63-2-438-0090
China
+86-21-5385-3786
Business hours: 9:00 AM to 5:00 PM
Ricoh Company, Ltd.
Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo
104-8222, Japan
2009 September
*L755 2971C*
EN USA GB GB AE AE
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
|
PYLE Audio Stereo Equalizer PT655E User Guide
PYLE Audio TV Mount PSWLE82 User Guide
Radio Shack TV Antenna VU 110XR User Guide
RCA CRT Television J26HE840 User Guide
Regalo Pet Fence 1164 User Guide
Ricoh All in One Printer 8060 User Guide
Roberts Radio Cassette Player SRC985 User Guide
Salton Coffeemaker MECM1 User Guide
Samsung Car Video System 460UX User Guide
Sears Lawn Mower 91728858 User Guide