User’s Manual
DVD-V6700
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Type and Characteristics
This DVD-VCR is capable of playing the following types of discs with the corresponding logos :
Disc Types (Logos) Recording Types Disc Size
Max. Playing Time
Characteristics
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
DVD
12 Cm
Audio
+
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Video
8 Cm
Double-sided 160 min.
VIDEO-CD
74 min.
12 Cm
Audio
+
• Video with CD sound, VHS quality &
MPEG-1 compression technology.
Video
8 Cm
20 min.
74 min.
AUDIO-CD
12 Cm
8 Cm
• CD is recorded as a Digital Signal
with better audio quality, less distor-
tion and less deterioration of audio
quality over time.
Audio
20 min.
- DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics).
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc
or condition of the recording.
- The recorded disc may not run as playback depends on the recording speed.
- Do not run the player with two discs loaded at the same time.
Disc Markings
Play Region Number
Both the DVD-VCR and the discs are coded by
region. These regional codes must match in
order for the disc to play. If the codes do not
match, the disc will not be played.
~
Play Region Number.
PAL colour system in Europe, Australia,
New Zealand, etc.
PAL
NTSC broadcast system in U.S.A,
Canada, Korea, Japan, etc.
The Region Number for this player is
described on the rear panel of the player.
NTSC
Dolby Digital disc.
Stereo disc.
STEREO
DIGITAL
SOUND
Digital Audio disc.
DTS disc.
Disc contains a Divx software product.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timer Programming Feature . . . . . . . . . . . . . . . .25
Checking a Preset Recording . . . . . . . . . . . . . . . . . . . . . . .26
Cancelling a Preset Recording . . . . . . . . . . . . . . . . . . . . . .27
Contents
Getting Started
Playing Back
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . .3
Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front View of the DVD-VCR (DVD-V6700) . . . . . . . . . . .5
Rear View of the DVD-VCR (DVD-V6700) . . . . . . . . . . . .5
Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Inserting Batteries in the Remote Control . . . . . . . . . . . . . . .7
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . .7
Playing a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Adjusting Picture Alignment Manually . . . . . . . . . . . . . . . . .27
Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . . .28
Playing a Cassette in Slow Motion . . . . . . . . . . . . . . . . . . .28
Playing a Sequence Frame by Frame . . . . . . . . . . . . . . . .28
Playing a Sequence at Variable Speeds . . . . . . . . . . . . . . .28
Searching for a Specific Sequence . . . . . . . . . . . . . . . . . . .29
Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . .30
DVD Functions
Connections
Setting Up the Language Features . . . . . . . . . . . . . . . . . . .31
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . . .32
Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . . .33
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . . .34
DivX(R) Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . .37
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . . .38
Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . . .39
Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . . .40
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . . .40
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . . .41
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Program & Random Play (CD/MP3/WMA) . . . . . . . . . . . . . . . .44
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Divx/MPEG4 Special Playback Features . . . . . . . . . . . . . .47
Connecting DVD-VCR to the TV using the RF Cable . . . . 9
Connecting DVD-VCR to the TV using the
Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting DVD-VCR to the TV using the
S-Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting DVD-VCR to the TV using the
Component Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to an AV amplifier with the digital
input jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting Extend Device . . . . . . . . . . . . . . . . . . . . . . . . 12
Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Settings
Tuning Your Television for the DVD-VCR . . . . . . . . . . . . . .14
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . .14
Setting the Menu Language . . . . . . . . . . . . . . . . . . . . . . . .15
Presetting the Stations Automatically . . . . . . . . . . . . . . . . .15
Presetting the Stations Manually . . . . . . . . . . . . . . . . . . . . .16
Clearing a Preset Station . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Changing the Preset Station Table . . . . . . . . . . . . . . . . . . .18
Selecting the RF OUT Sound Mode (B/G-D/K) . . . . . . . . . .19
Setting the VCR Output Channel . . . . . . . . . . . . . . . . . . . .19
Reference
VCR Functions
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Troubleshooting Guide (VCR) . . . . . . . . . . . . . . . . . . . . . . .50
Troubleshooting Guide (DVD) . . . . . . . . . . . . . . . . . . . . . . .51
Selecting the Colour Mode . . . . . . . . . . . . . . . . . . . . . . . . .20
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Intelligent Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . .21
Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . . . 22
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . . . .23
Protecting a Recorded Cassette . . . . . . . . . . . . . . . . . . . . .23
Recording a Programme Immediately . . . . . . . . . . . . . . . . .23
Recording a Programme with Automatic Stop . . . . . . . . . .24
Recording from Another VCR or Camcorder . . . . . . . . . . . . . .24
Using the Assemble Edit Function . . . . . . . . . . . . . . . . . . .25
4 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Overviews
Front View of the DVD-VCR (DVD-V6700)
1
2
3
4
LINE IN
2
5
6
7
8
9
10 11 12 13 14 15 16 17
1. DVD DECK.
2. OPEN/CLOSE BUTTON.
10. PROGRAMME SELECTION BUTTON.
11. DVD/VCR SELECTION BUTTON.
12. EZ VIEW BUTTON.
3. VIDEO CASSETE COMPARTMENT.
4. EJECT BUTTON.
13. RECORD BUTTON.
5. STANDBY/ON BUTTON.
14. REWIND/SKIP BACK BUTTON.
15. STOP BUTTON.
6. VIDEO INPUT JACK LINE IN 2.
7. AUDIO L/R INPUT JACK LINE IN 2.
16. PLAY/STILL BUTTON.
8. PROGRESSIVE SCAN MODE BUTTON.
9. FRONT PANEL DISPLAY.
17. FAST FORWARD/SKIP NEXT BUTTON.
Rear View of the DVD-VCR (DVD-V6700)
1
3
5
7
2
6
4
8
9
1.
2.
3.
4.
5.
ANTENA INPUT
6.
7.
8.
9.
DIGITAL AUDIO OUT (COAXIAL)
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT (OPTICAL)
S-VIDEO OUT
RF OUT TO TV
LINE IN 1 (Audio / Video)
LINE OUT (Audio / Video)
LINE AUDIO OUT
(S-VIDEO OR COMPONENT)
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Indicators
1
2
3
4
5
6
1. The DVD Deck is active.
2. Disc is loaded.
3. The time, counter position, current deck status is displayed.
4. Video tape is inserted.
5. The VCR Deck is active.
6. A Timer Recording is programmed or in progress.
6 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Tour of the Remote Control
Make sure that the following basic accessories
are supplied with your DVD-VCR.
16
17
1
2
18
19
Batteries for
remote controls
Owner’s
Instructions
RF-Cable
3
20
21
22
4
5
Audio & Video
Cable
Remote Control
6
7
23
24
Inserting Batteries in the Remote
Control
8
9
You must insert or replace the batteries in the
remote control when you:
• Purchase the DVD-VCR
25
26
• Find that the remote control is no longer
working correctly
10
11
1 To release the battery compartment cover,
push the tab in the direction of the arrow and
lift up.
12
13
27
28
14
15
29
30
2 Insert two AAA, RO3 or equivalent batteries,
taking care to respect the polarities:
• + on the battery with + on the remote
control.
• – on the battery with – on the remote
control.
Do not mix different battery types (manganese
and alkaline for example).
3 Replace the cover by aligning it with the base
of the remote control and push it down.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. DVD,VCR
Used to operate DVD, VCR.
26. RETURN
Used to return to a previous menu.
2. STANDBY/ON
Used to turn the power on or off.
27. ZOOM
Used to enlarges picture .
3. Number buttons
28. CLEAR
Used to clear a preset TV station.
4. TIMER
Used to cancel a preset recording.
Used to cancel a preset mark.
Used to set the tape counter to zero.
Used to resume normal play during repeat
play.
Used to activate the timer recording of
a programme.
5. REC ( ● )
Used to make a recording on cassette.
29. MARK
6. SKIP (
/
)Use to skip a title, chapter
Used to mark a position during playback a
disc.
or track.
7. STOP ( ■ )
Used to stop during playback.
SEARCH
Used to search for a specific sequence.
8. AUDIO
30. MODE
Used to access various audio functions.
Used to select the programme or random
play.
9. TRK ( ›ꢀꢀ/ ‚ꢀꢀ)
Used to adjust picture alignment manually to
obtain the best possible picture during play-
back.
REPEAT
Used to allow the repeat play a title, chapter,
track, disc or A-B.
10. MENU
Used to display the on-screen menu.
11. OK ›ꢀꢀ/ ‚ꢀꢀ,¥ / Š
Used to control the cursor in the on-screen
menu and confirm your choice.
12. EZ VIEW
Used to adjust the aspect ratio on a disc.
13. DISC MENU
Used to display a disc menu.
14. SUBTITLE
Used to change the DVD’s subtitle language.
15. ANGLE
Used to access various camera angles on a
DVD.
IPC (Intelligent Picture Control).
Used to adjust the sharpness of the picture.
16. INPUT SEL.
Used to select a external input signal.
17. TV/VCR
18. INFO.
Used to display the current setting or disc
status.
19. OPEN/CLOSE
Used to open and close the disc and video
cassette tray.
20. SHUTTLE
Used to play a sequence at variable speeds.
21. F.ADV/STEP
Used to advance a sequence frame by
frame.
22. SPEED
Used to select the recording speed.
23. PLAY/PAUSE (
) Used to play or pause
during playback.
24. SEARCH (
/
)Used to search forward
or backward through a disc.
(
/
)
25. PROG
Used to select a TV programme.
8 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting DVD-VCR to the TV
using the Audio/Video Cable
Connections
You can connect your DVD-VCR to the tele-
vision using the Audio/Video cable if the
appropriate input is available on the televi-
sion. You thus:
Connecting DVD-VCR to the TV
using the RF Cable
To receive television programmes a signal
must be received from one of the following
sources:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your
DVD-VCR
• An outdoor aerial
• An indoor aerial
Notes
• A cable television network
• A satellite receiver
•
Regardless of the type of connection chosen,
you must always connect the RF Cable sup-
plied. Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off.
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
Note
•
•
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1Connect the RF Cable.
1Remove the aerial or network input cable
from the television.
2Connect one end of the Audio/Video cable
to the Video output and Audio L, R output
jack on the rear of the DVD-VCR.
2Connect this cable to the 75Ω coaxial jack
marked
on the rear of your DVD-VCR.
3Plug the other end into the appropriate
connector on the television.
3Plug the RF Cable supplied into
on your DVD-VCR.
TV
the jack
4Plug the other end of the RF Cable into the
connector previously used for the aerial on
the television.
Aerial
Aerial cable
Aerial
Aerial cable
2
TV
Yellow
RF cable
3
4
RF cable
ANT IN
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting DVD-VCR to the TV
using the S-Video Cable
Connecting DVD-VCR to the TV
using the Component Video Cable
Your TV must support progressive scan input
to allow you to watch component video output.
You will enjoy high quality accurate colour
reproduction images. Component video seper-
ates the picture element into black and
white(Y), blue(Pb), red(Pr) signals to present
most clear and clean images.
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present
clearer images than regular video input mode.
1Connect one end of the S-Video cable into
the S-VIDEO output jack on the rear of the
DVD-VCR.
1Connect Component video cables between
the COMPONENT VIDEO OUT jacks on the
rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
2Plug the other end of the S-Video cable into
the appropriate input connector on the
television.
3Connect one end of the audio cables sup-
plied into the AUDIO LINE output jacks on
the rear of the DVD-VCR.
2Connect audio cables between the AUDIO
LINE OUT jacks on the rear of the DVD-VCR
and AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
• Take care to respect the colour coding of
the left and right channels.
4Plug the other end of the audio cables into the
appropriate input connectors on the television.
COMPONENT VIDEO OUT
1
3
1
2
4
COMPONENT INPUT
2
COMPONENT VIDEO IN
10 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an AV amplifier with
the digital input jack
Progressive Scan (DVD only)
If the TV connected supports Progressive Scan,
press the P.SCAN button on the front panel in
stop mode.
To take full advantage of the movie theater
experience that DVD offers, you may want to
connect your DVD-VCR to a complete
Surround Sound system, including an A/V
Receiver and six Surround Sound speakers.
If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass
the DVD-VCR’s built-in Dolby Digital Decoder.
Use the Digital Audio Out connection below.
To enjoy Dolby Digital or DTS sound, you must
set up the audio settings. (See page 33)
• The message “Press OK to confirm
Progressive scan mode. Otherwise press
RETURN.” will be displayed. If you want
Progressive scan mode, select OK. Make
sure that the disc has stopped completely
before changing the mode.
1Connect a Digital Audio coaxial/optical cable
from the Digital Audio Out jacks on the panel of
the DVD-VCR to their corresponding Digital
Audio Input jacks on your A/V Receiver:
LINE IN
2
• To cancel the progressive scan mode, press
the P.SCAN button in stop mode.
Notes
•
•
Do not press the P.SCAN button if you are using a
TV that does not support Progressive mode.
Nothing will be displayed on the screen if pressed.
To release the Progressive mode, press the
P.SCAN button in stop mode.
See your TV User’s Manual to find out if your TV
supports Progressive Scan.If Progressive Scan is
supported, follow the TV User’s instructions regard-
ing Progressive Scan settings in the TV’s menu
system.
•
•
Depending on your TV, the method of connection
may differ from the illustration above.
What is "Progressive Scan"? Progressive scan has
twice as many scanning lines as the interlace out-
put method has. Progressive scanning method can
provide better and clear erpicture quality.
You must connect the player to the component(s)
before using the Progressive Scan feature.
Make sure that the colour coded connections
match. That is, the Y, Pb and Pr component output
jacks of your DVD -VCR should be connected to
the exact corresponding component input jacks on
your TV. Otherwise, red or blue images will be dis-
played on the TV screen.
•
•
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder
•
NTSC DVD disc is not supported.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Extend Device
Method 2 : Connecting a
Camcorder to the LINE IN 2
jacks
This allows you to connect your DVD -VCR to
other external devices and view or record their
outputs.
• Method 1 : Connecting a VCR, Set-Top
Box(STB) or
You can use the LINE IN 2 jacks on the front
panel of the DVD-VCR. You can record from
connected equipment.
DVD-VCR to the AUDIO/VIDEO
LINE IN 1 jacks.
When an input source is inserted into LINE IN 2
while viewing TV, the input will be switched to
LINE IN 2 automatically.
• Method 2 : Connecting a Camcorder to the LINE
IN 2 in jacks.
Method 1 : Connecting a VCR,
set-top Box (STB) Or DVD-VCR to
the AUDIO/VIDEO LINE IN 1 jacks
Connecting a VCR or external device to
AUDIO/VIDEO LINE IN 1 jacks of the DVD-VCR.
LINE IN
2
You can record from connected equipment
(VCR, STB or DVD).
Notes
•
•
You can also use the LINE IN 2 jacks on the front
panel of the DVD-VCR.
When the S-Video jack and Video jack are both
connected, the S-Video jack will have priority. Line
Selection will be automatically done
•
Copy protected content cannot be recorded.
12 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Auto Setup
Auto Setup
Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
Please Wait
10%
ŠŠ
RETURN
MENU
1Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable)
6Check the date and time.
Clock Set
2Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
SETUP
Time
Date
Year
/ 2007 MON
DVD
VCR
12 : 00
01 / JAN
PROG
FUNC
OK
RETURN
MENU
3The Language Set menu is displayed.
Refer to “Setting the Date and Time” to
change the date and time. (see page: 14)
Language Set
Š
English
Français
Deutsch
Español
Italiano
Notes
•
•
Now, you only have to switch the DVD-VCR
on and it is ready for use.
Function for “Plug & Auto Set Up” is fixed
already. So if you want to change this fixed
one, you can change. (refer to “Presetting the
Stations Manually” page 16).
Nederlands
êÛÒÒÍËÈ
OK
RETURN
MENU
4Press the › or ‚ button to select the
desired language, then press OK button.
Start the auto setup.
Auto Setup will be
started.
Check antenna and TV
cable connection.
RETURN
MENU
5Start the auto scanning.
The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Date and Time
Settings
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording.
• Preset your DVD-VCR to record a programme
automatically.
Tuning Your Television for the DVD-
VCR
You must tune your television for the DVD-VCR
only if you are using the RF cable.
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
To view pictures from your DVD-VCR when a
Scart cable is used, the television must be set to
the audio/video mode (AV).
1Switch on the television.
1Press the MENU button, then press the OK or
Š button.
2Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-
VCR or STANDBY/ON on the remote control.
Setup
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
Install
3Select a programme position on the television
to be reserved for use with your DVD-VCR.
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
4Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the ŠII button.
RETURN
MENU
OK
2Press the › or ‚ button to select Clock,
then press the OK or Š button.
The Clock Set menu is displayed.
5Start a scan on your television or set the tele-
vision to UHF channel 38.
(New Zealand : UHF 36CH)
3Press the ¥ or Š button to select the hour,
minutes, day, month, and year. The selected
option is highlighted. Press the › or ‚ button
to set them. The day of the week is displayed
automatically. Press the OK button.
6Fine tune the television until the pictures and
sound are obtained clearly.
7When the picture and sound are perfectly
clear, store this channel at the desired
programme position on the television.
That programme is now reserved for use with
your DVD-VCR.
Clock Set
SETUP
Time
Date
Year
DVD
VCR
12 : 00
01 / JAN
/ 2007 MON
PROG
FUNC
RETURN
OK
MENU
• You can hold down the › or ‚ꢀbutton to
scroll more quickly through the values.
• Press the MENU button to exit the menu.
14 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Menu Language
Presetting the Stations
Automatically
1Press the MENU button, then press the OK or
You do not need to preset the stations if you
have already set them automatically (refer to
“Plug & Auto Set Up” on page 13).
Š button.
Setup
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
Your DVD-VCR contains a built-in tuner used
to receive television broadcasts.
You must preset the stations received through
the tuner. This can be done:
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
• Plug & Auto Set up (refer to page 13)
• Automatically
• Manually (refer to page 16)
RETURN
MENU
OK
You can store up to 80 stations.
2Press the OK or Š button again.
The Language Set menu is displayed.
1Press the MENU button, then press the OK
or Š button.
Language Set
Setup
Š
English
Français
Deutsch
Español
Italiano
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
Install
User Set
Nederlands
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
êÛÒÒÍËÈ
OK
RETURN
MENU
RETURN
MENU
OK
3Press the › or ‚ button to select desired
language, then press the OK or Š button.
• Press the MENU button to exit the menu.
2Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
Autralia Model
Install
SETUP
Auto Setup
Š
Š
Š
Manual Setup
DVD
VCR
VCR Output CH : CH 38
PROG
FUNC
RETURN
MENU
OK
New Zealand Model
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
Š
Š
Š
DVD
VCR
: G
VCR Output CH : CH 36
PROG
FUNC
RETURN
MENU
OK
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting the Stations Manually
3Press the › or ‚ button to select Auto
Setup, Press the OK button.
A message is displayed, indicating that any
channels already preset on your DVD-VCR
will be deleted.
You do not need to preset the stations manually
if you have already set them automatically.
1Press the MENU button, then press the OK or
Š button.
Auto Setup
Setup
Your data will be lost
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
Press OK to continue
MENU to exit
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
OK
RETURN
MENU
RETURN
MENU
OK
4Press the OK button to start the auto scanning.
The message Please Wait is displayed.
2Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
Australia model :
Auto Setup
Install
Please Wait
SETUP
Auto Setup
Š
Š
Š
10%
Manual Setup
ŠŠ
DVD
VCR
VCR Output CH : CH 38
RETURN
MENU
PROG
FUNC
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
RETURN
MENU
OK
New Zealand model :
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
Š
Š
Š
DVD
VCR
• If you wish to cancel the auto scanning
before the end, press the MENU button.
: G
VCR Output CH : CH 36
PROG
FUNC
Notes
RETURN
MENU
OK
•
•
The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
3Press the › or ‚ button to select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually
(refer to page 14).
4Press the › or ‚ button to select the
required programme number.
•
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 17).
❉
❉
PR
1
TV STATION TABLE
❉
❉
CH
01
04
NAME
- - - -
- - - -
2
3
4
5
›‚ꢀꢀꢀ Š
DELETE : CLEAR
SWAPPING : OK
RETURN
16 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing a Preset Station
5Press the Š button to preset the station.
The MANUAL TUNING menu will be dis-
played.
Press the ¥ or Š button to start scanning the
channels. The frequency band is scanned and
the first station found is displayed.
If you have stored a TV station:
• That you do not require
• At the wrong programme position, you can
cancel it.
1Press the MENU button, then press the OK or
❉
❉
MANUAL TUNING.
❉
❉
Š button.
PR
:
:
:
:
1
CH
01
-
Setup
MFT
NAME
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
-
-
-
-
DVD
VCR
Install
User Set
›‚ꢀꢀꢀꢀꢀ¥ꢀꢀŠ
MEMORY : OK
RETURN
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
6If necessary, press the › or ‚ button to
select MFT, then press the ¥ or Š button to
adjust the picture.
RETURN
MENU
OK
2Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
Australia model :
7Press the › or ‚ button to select NAME.
The station name is set automatically from the
broadcast signal.
• To change the programme’s name, press
the Š button. The first letter of the name
flashes.
Install
SETUP
Auto Setup
Š
Š
Š
Manual Setup
DVD
VCR
VCR Output CH : CH 38
To...
Then...
Select a character
in the name.
Press the › or ‚ꢀbutton until the
PROG
FUNC
required character is displayed
(letters, numbers or “-” character)
.
RETURN
MENU
OK
Move to the next
previous or
character
Press the ¥ or Š button
respectively.
New Zealand model :
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
8
If you...
Then...
Š
Š
Š
DVD
VCR
Wish to store the
station displayed
•
Press OK to store the
station.
: G
VCR Output CH : CH 36
PROG
FUNC
Do not wish to
store the station
displayed
•
•
Press the › or ‚ꢀbutton until
the CH is selected.
Press the ¥ or Š button to
RETURN
MENU
OK
go on scanning the
frequency band and display
the next station.
3Press the › or ‚ꢀbutton to select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
9 Repeat this procedure from step 4 onwards,
until all the required stations have been
stored.
❉
❉
TV STATION TABLE
❉
❉
PR
CH
01
NAME
- - - -
1
2
3
4
5
10 Press the MENU button to exit the menu.
›‚ꢀꢀꢀꢀꢀꢀꢀꢀŠ
DELETE : CLEAR
SWAPPING : OK
RETURN
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
4Press the › or ‚ button to select required
preset TV station.
Press the CLEAR button to delete.
.4 Press the › or ‚ button to select required
preset TV station. The selected station is dis-
played at the same time on the television
screen.
5Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
5Press the OK button to change the
programme number assigned to a station.
❉
❉
TV STATION TABLE
❉
❉
Changing the Preset Station Table
PR
CH
01
NAME
- - - -
You can rearrange the station table and give
different programme numbers to the stations
listed according to your own preferences.
1
2
3
4
5
1Press the MENU button, then press the OK or
Š button.
›‚ꢀꢀꢀ
SWAPPING : OK
RETURN
Setup
6Press the › or ‚ button to select required
position, then press the OK button to swap
the position.
For example to move a TV station in
programme 1 to programme 3.
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
RETURN
MENU
OK
❉
❉
TV STATION TABLE
❉
❉
PR
CH
NAME
1
2
3
4
5
2Press the › or ‚ button to select Install,
then press the OK or Š button. The Install
menu is displayed.
01
- - - -
Australia model :
›‚ꢀꢀꢀꢀꢀꢀŠ
DELETE : CLEAR
SWAPPING : OK
RETURN
Install
SETUP
Auto Setup
Š
Š
Š
Manual Setup
DVD
VCR
• Press the MENU button to exit the menu.
VCR Output CH : CH 38
PROG
FUNC
RETURN
MENU
OK
New Zealand model :
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
Š
Š
Š
DVD
VCR
: G
VCR Output CH : CH 36
PROG
FUNC
RETURN
MENU
OK
3Press the › or ‚ꢀbutton to Select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
18 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the RF OUT Sound Mode
(B/G-D/K) (New Zealand Model only)
2Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
You can choose the sound mode (B/G or D/K)
according to the TV set connected to your VCR.
3Press the › or ‚ button to select VCR
Output CH.
1Press the MENU button, then press the OK
or Š button.
Autralia Model
Setup
Install
SETUP
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
Auto Setup
Š
Š
Š
Manual Setup
DVD
VCR
DVD
VCR
Install
VCR Output CH : CH 38
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
PROG
FUNC
RETURN
MENU
OK
RETURN
MENU
OK
New Zealand Model
2Press the › or ‚ button to select Install,
then press the OK or Š button. The Install
menu is displayed.
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
Š
Š
Š
3Press the › or ‚ꢀbutton to select TV
System, then press the OK or Š button to
select G or K.
DVD
VCR
: G
VCR Output CH : CH 36
PROG
FUNC
Install
SETUP
Auto Setup
Manual Setup
TV System
Š
Š
Š
Š
RETURN
MENU
OK
DVD
VCR
: G
4Press the OK or ¥ or Š button to select the
required output channel .
VCR Output CH : CH 36
PROG
FUNC
Australia Model
RETURN
MENU
OK
➝ CH28 ➝ ..CH38 ➝ ..CH69
• Press the MENU button to exit the menu.
New Zealand Model
Setting the VCR Output Channel
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference
or if your TV cannot find the pictures.
➝ CH21 ➝ ..CH36 ➝ ..CH69
• Press the MENU button to exit the menu.
Then tune your television again (see page 14)
• You can select the required output channel
directly by using the number button.
1Press the MENU button, then press the OK
or Š button.
Setup
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
RETURN
MENU
OK
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
3Press the OK or Šꢀbutton to select required
colour system.
Auto ➝ PAL ➝ MESECAM➝ B/W
• Auto: When playing back a cassette,
the system standard is automatically
selected by the DVD-VCR.
VCR Functions
Selecting the Colour Mode
Before recording or playing back a cassette,
you can select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
• When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
• When you playback an NTSC-recorded tape
on this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB. If your TV is
multi system TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
• B/W: Black and White.
NICAM
(New Zealand Model only)
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual
(transmission in another language).
NICAM programmes are always accompanied by
a standard mono sound broadcast and you can
select the desired sound. Please refer to page 28.
1Press the MENU button, then press the OK or
Š button.
1Press the MENU button, then press the OK
or Š button.
Setup
Setup
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
DVD
VCR
Install
Install
User Set
User Set
Auto Power Off
Screen Messages
: Off
: On
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
PROG
FUNC
RETURN
MENU
OK
RETURN
MENU
OK
2Press the › or ‚ button to select User Set,
then Press the OK or Š button.
The User Set menu is displayed.
2Press the › or ‚ button to select User Set,
then press the OK or Š button.
The User Set menu is displayed.
Australia model :
3Press the › or ‚ button to select NICAM, then
press the OK or Š button to select On or Off.
User Set
SETUP
Colour System
IPC
: Auto
: On
Š
Š
User Set
SETUP
Colour System
NICAM
: Auto
: ON
: On
Š
Š
Š
DVD
VCR
DVD
VCR
IPC
PROG
FUNC
PROG
FUNC
RETURN
MENU
OK
RETURN
MENU
OK
New Zealand model :
• On (for NICAM mode):
Normally set at this position
User Set
SETUP
Colour System
NICAM
: Auto
: ON
: On
Š
Š
Š
• Off (for MONO mode):
DVD
VCR
Only set at this position to record
the standard mono sound during a NICAM
broadcast if the stereo sound is distorted
due to inferior reception conditions.
IPC
PROG
FUNC
RETURN
MENU
OK
20 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Intelligent Picture Control
Auto Power Off
This feature allows you to adjust the sharpness
of the image automatically, according to your
own preferences.
This feature automatically turns off your DVD-
VCR if no signal is received and you do not
press any button for the selected time.
1During playback, press the MENU button,
then press the OK or Š button.
1Press the MENU button, press the OK or Š
button.
Setup
2Press the › or ‚ button to select User Set,
then press the OK or Š button.
The User Set menu is displayed.
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
3Press the › or ‚ button to select IPC
(Intelligent Picture Control), then press the OK
or Š button.
PROG
FUNC
RETURN
MENU
OK
Australia model :
User Set
2Press the › or ‚ button to select Auto
Power Off.
SETUP
Colour System
IPC
: Auto
: On
Š
Š
DVD
VCR
Setup
Language
Clock
: English
Š
Š
Š
Š
Š
Š
SETUP
PROG
FUNC
DVD
VCR
Install
User Set
Auto Power Off
Screen Messages
: Off
: On
RETURN
MENU
OK
PROG
FUNC
New Zealand model :
RETURN
MENU
OK
User Set
SETUP
Colour System
NICAM
: Auto
: On
Š
Š
Š
3 Press the OK or Š button to select the
DVD
VCR
preset interval.
IPC
: On
➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour
PROG
FUNC
• Press the MENU button to exit the menu.
RETURN
MENU
OK
• You can select the modes simply by press-
ing the IPC button.
4To adjust the sharpness manually, press the
‚ button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the ¥ or Š buttons until the picture is
displayed according to your preferences.
❉
❉
PICTURE
❉
❉
IPC
:
OFF
SOFTEN
SHARPEN
❉
¥ꢀꢀŠ
ON/OFF :
‚
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Messages
Selecting the Cassette Type
Your DVD-VCR displays most information both
the DVD-VCR and the television.
If you wish to use the tape counter to display the
time remaining on a cassette, you must indicate
the type of cassette inserted.
You can choose to display or hide this informa-
tion on the television screen (If you configure
the Screen Message to Off, the Fast Forward
and Rewind messages will not be displayed on
the screen. However, the Search Message will
not be displayed on the screen regardless of
the Screen Message configuration).
1Press the MENU button, then press the › or
‚ button to select VCR.
2Press the OK or Š button.
The Tape Select is highlighted.
VCR Setup
1Press the MENU button, then press the OK
or Š button.
Tape Select
Repeat Play
: E180
: Off
Š
Š
SETUP
DVD
VCR
Setup
SETUP
Language
Clock
: English
Š
Š
Š
Š
Š
Š
PROG
FUNC
DVD
VCR
Install
User Set
RETURN
OK
MENU
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
3Press the OK or Š button to select the
correct cassette length.
➝ E180 ➝ E240 ➝ E260 ➝ E300
RETURN
MENU
OK
2Press the › or ‚ button to select Screen
Messages.
• Press the MENU button to exit the menu.
Setup
Language
Clock
: English
Š
Š
Š
Š
Š
Š
SETUP
Repeat Play
DVD
VCR
Install
You can set repeat play to repeat the tape
continously from beginning to end.
User Set
Auto Power Off
Screen Messages
: Off
: On
PROG
FUNC
1Press the MENU button, then press the › or
‚ button to select VCR.
RETURN
MENU
OK
2Press the OK or Š button, then press the
›or‚ button to select Repeat Play.
3Press the OK or Š button to select On or
Off.
Press the OK or Š button to select On or Off.
• On : Select to display on-screen informa-
tion.
VCR Setup
• Off : Select to hide on-screen information.
• Press the MENU button to exit the menu.
Tape Select
Repeat Play
: E180
: Off
Š
Š
SETUP
DVD
VCR
PROG
FUNC
OK
RETURN
MENU
• On: Repeat play.
• Off: Do not wish to repeat play.
22 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Recording Speed
Recording a Programme
Immediately
You can record a cassette at two different
speeds:
• SP (Standard Play)
Before recording a programme, you must have
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 15~16.
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1Switch on the television.
1Press the SPEED button to select SP or LP.
• The selected record speed will appear on
the front panel display.
2Insert the video tape in to the VCR deck, with
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.
3Select the station by pressing the PROG
(
or ) button or select the source (LINE IN
1, LINE IN 2) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.
Type
E180
E240
E260
E300
Recording Time (in SP)
180 mins. or 3 hours
240 mins. or 4 hours
4Select the recording speed by pressing the
SPEED button as many times as required
(Refer to page 23).
260 mins. or 4 hours and 20 mins.
300 mins. or 5 hours
5Hold down the REC (●) button for a while to
start recording.
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 29).
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the
tab using a small screwdriver.
6To stop recording, press the ■ button once.
• If your DVD-VCR ejects the cassette when
you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
• If you reach the end of the tape while
recording, the cassette rewinds
2To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.
automatically.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Programme with
Automatic Stop
Recording from Another VCR or
Camcorder
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
Camcorder etc.
This function enables you to record up to nine
hours (LP) of programmes.Your DVD-VCR stops
automatically after the requested length of time.
• It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in
any form without the permission of the owners
of the corresponding copyright.
1Switch on the television.
2Insert the cassette on which the programme
is to be recorded, with the window visible and
the safety tab intact or the opening covered
with adhesive tape. The DVD-VCR is
switched on automatically.
1Connect the output jack of your external
devices to the LINE IN 1 or LINE IN 2 on the
front or rear of the DVD-VCR.
2Insert a blank cassette in your DVD-VCR.
3Select the station to be recorded by pressing
the PROG( or ) button or select the
source (LINE IN 1, LINE IN 2) by pressing the
INPUT SEL. button for a satellite tuner or
external video source. The station number is
displayed and the programme can be seen on
the television.
3Insert the pre-recorded cassette in the other
video source (VCR or Camcorder etc).
4Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
• LINE IN 1, LINE IN 2 for the audio/video input.
4Select the recording speed by pressing the
SPEED button as many times as required
(Refer to page 23).
5Start playing back the cassette to be copied.
6Hold down the REC (●) button for a while to
start recording on your DVD-VCR.
5Hold down the REC (●) button for a while to
start recording. The record indicator appears
on the television screen and DVD-VCR dis-
play. An index is recorded on the tape (Refer
to page 29).
7When you have finished recording, press the
■ button on both VCR and DVD-VCR.
• If you wish to view the cassette being
copied, your DVD-VCR must be connected
as usual to the television (Refer to page 9
for further details).
6Press the REC (●) button several times to
increase the recording time in:
• 30-minute intervals up to four hours.
• 1-hour intervals up to nine hours.
The length is displayed on the television dis-
plays. The selected programme is recorded
for the length of time requested. At the end of
that time, the DVD-VCR stops recording auto-
matically and power off.
LENGTH 2:30
SET LENGTH :
PRESS REC
●
7If you wish to cancel the recording before the
end, press the STANDBY/ON button.
• If the end of the tape is reached while
recording, the recording stops and power off.
24 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Assemble Edit Function
Using The Timer Programming
Feature
This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
1Insert the cassette to be edited in your
DVD-VCR.
2Press the Šll button to start playback.
• You must check that the cassette tape is
loaded.
3When you reach the position from which you
wish to start the new recording,
press the Šll button.
1Press the MENU button, then press the › or
‚ button to select PROG.
Timer Method
4Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until
the exact recording position is located.
SETUP
If you want to set the
DVD
timer program, press
VCR
the OK key.
5While the DVD-VCR is in still mode, hold
down the REC (●) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
PROG
FUNC
RETURN
OK
MENU
2Press the OK or Š button. The timer pro-
gramming menu is displayed.
6Select the source from which you wish to
record by pressing:
• The PROG
channels.
or
button for television
3Press the OK or Š button to select PR, then
press the ›or‚ button to select the required
station.
• The INPUT SEL. button for the LINE IN 1,
LINE IN 2 input source.
• Press the INPUT SEL. button to select an
input source (LINE IN 1, LINE IN 2) other
then the tuner.
7Press the Šll button to start recording.
If you want to finish the recording, press the
■ button.
4Press the Š button to select Day, then press
the › or ‚ button to select the required day.
PR
01
Day
Start
Stop
Speed
:
:
MO 01
:
:
:
:
:
:
:
:
:
:
RETURN
MENU
OK
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
• DLY
• W-SU
• W-MO
: Daily
: Weekly Sunday
Weekly Monday
9 Press the MENU button to exit the menu.
10 Press the STANDBY/ON button to activate
the timer.
• W-SA
• MO 01
Weekly Saturday
: Monday 01
5Press the Š button to select Start (Start time
of recording).
Before starting recording, the DVD-VCR
compares the timer duration with the
remaining time on the cassette.
PR
01
Day
Start
Stop
Speed
:
MO 01
13 : 25
:
:
:
:
Checking a Preset Recording
:
:
:
:
:
:
You can check your preset recordings:
• When you have finished presetting the DVD-
VCR
RETURN
MENU
OK
• If you have forgotten which programmes will
be recorded.
6Press the Š button to select Stop (Recording
stop time).
• Press the ¥ or Š button to select the hour
or minute.
1Press the MENU button, then press the › or
‚ button to select PROG.
The Timer Method menu is displayed.
• Press the › or ‚ button to set the stop
time.
Timer Method
SETUP
DVD
7Press the Š button to select Speed
(Recording speed).
If you want to set the
VCR
timer program, press
the OK key.
PROG
FUNC
PR
Day
Start
Stop
Speed
SP
01
MO 01
13 : 25
19 : 57
OK
RETURN
MENU
:
:
:
:
:
:
:
:
:
:
2Press the OK or Šbutton. The list of preset
recodings is displayed with the corresponding
information.
RETURN
MENU
OK
PR
Day
Start
Stop
Speed
• Press the ›or ‚ button to select the
required recording speed.
• Auto ➝ SP (Standard Play) ➝ LP (Long
Play)
01
MO 01
13 : 25
19 : 57
SP
-- -- -- --
:
-- --
:
:-- --
:
:
:
:
:
:
:
• Auto Tape Speed Select
The DVD-VCR’s “Auto Tape Speed Select”
function compares the duration of the timer
recording to the actual recording time remain-
ing on the tape loaded. If there is insufficient
tape to complete a timer recording in Auto
mode, the DVD-VCR automatically switches
to LP mode to record the whole programme.
RETURN
MENU
OK
• It can be displayed simply by pressing the
TIMER button on the remote control.
8 When you have finished, press the OK button
to set the Timer Programming.
26 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
3To change any values, select the required
programme by pressing the œ or ƒ button,
then change any values as required. For
more details refer to page 25. (Step 2 to 9).
• Press the MENU button to exit the menu.
Playing Back
Playing a Cassette
This function allows you to play any pre-
recorded cassette.
Cancelling a Preset Recording
1Switch on both the television and your
You can cancel any programmes that are:
• Incorrect
DVD-VCR.
• No longer required
2If the safety tab on the cassette is removed,
the cassette is played automatically.
• When a cassette is loaded, the tape position
is optimized automatically to reduce
disturbance (Digital Auto Tracking).
• When playing a cassette, if the end of the
tape is reached, the cassette is rewound
automatically. NTSC tapes can be played
back but cannot be recorded with this DVD-
VCR.
1Press the MENU button, then press the œ or
ƒ button to select PROG . The Timer
Method menu is displayed.
Timer Method
SETUP
If you want to set the
DVD
timer program, press
VCR
the OK key.
PROG
FUNC
3Press the ■ (stop) button to stop the
RETURN
OK
MENU
playback.
Press the
playback.
(eject) button to eject the
2Press the OK or ‹¤button. The list of preset
recodings is displayed with the corresponding
information.
• It can be displayed simply by pressing the
TIMER button on the remote control.
Adjusting Picture Alignment
Manually
3 Press the œ or ƒ button to select the
programme to be cancelled,then press the
CLEAR button .
This feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during play-
back, adjust alignment manually by pressing the
TRK (œ or ƒ) button until the picture is clear
and stable.
PR
Day
Start
Stop
Speed
-- -- -- --
:-- --:-- --
:
:
:
:
• The tracking bar appears.
• The image is adjusted.
:
:
:
:
:
:
RETURN
MENU
OK
• All the recording information is deleted and
broadcast will not be recorded.
• Press the MENU button to exit the menu.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio Output Mode
Playing a Sequence Frame by
Frame
You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
The following options are available.
Press the AUDIO button on the remote control
until the required option is displayed.
You can
• Stop the cassette at a given frame (image)
• Advance one frame at a time
No sound is heard when playing back frame by
frame.
➝ L ➝ R ➝ MIX ➝ MONO ➝ L R
1Press the :
Option Description
• ‹ll button to start playing the cassette.
• ‹ll button again to make still mode.
• F.ADV button to advance frame by frame.
• ‹ll button to return to normal playback.
• Vertical stability: When playing back frame
by frame, interference may be seen on the
screen. Press the TRK (œ or ƒ) button to
minimize this effect.
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi
channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and
normal channels.
MONO Used to listen to the sound on the normal mono
channel.
L R
Used to listen to Hi-Fi stereo sound on the left
and right channels
• When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
Playing a Sequence at Variable
Speeds
Playing a Cassette in Slow Motion
You can vary the playback speed using the
Shuttle function (up to nine times the normal
speed). Example: You wish to analyse a sports
person’s technique, movement by movement.
• No sound is heard when playing a sequence
at variable speeds.
You can play a cassette in slow motion.
• No sound is heard when playing back a
cassette in slow motion.
1Press the :
• ‹ll button to start playing the cassette.
• ‹ll button again to make still mode.
• ‹‹ button to start slow mode.
• ¦¦ or ‹‹ button as many times as
required to decrease or increase the
speed respectively.
1Press the :
• ‹ll button to start playing the cassette.
• SHUTTLE (<<) button to play the cassette
backwards.
• SHUTTLE (>>) button to play the cassette
forwards.
• ‹ll button twice to return to the normal
speed.
• The slow motion feature does not support
running video backwards.
2Each time you press the SHUTTLE button,
the speed is changed as shown in the
following illustration.
2When playing back in slow motion, picture
interference may occur.
Press the TRK (œ or ƒ) button to minimize
this effect.
REVERSE REVERSE REVERSE
SLOW
SLOW
PLAY PLAY PLAY
PLAY
X9
PLAY
X5
PLAY
X3
STILL MOTION MOTION PLAY X3
X5
X9
X1/10
X1/5
• When you have been using the Slow Motion
function for more than about two minutes,
the DVD-VCR will automatically play to
protect the:
- Cassette.
- Video heads.
28 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Specific Sequence
End Search
Use this feature when you want to search for
a blank position to record a program on a
cassette.
Each time you record a cassette on this DVD-
VCR, an “index” is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the index-
es are numbered as follows:
The VCR will fast forward, searching for a
blank position, and then automatically stop at
that position. If the VCR reaches the end of
the tape during end search, the tape will be
ejected.
1Press the SEARCH button. The VCR
Function menu is displayed. Press the œ
or ƒ button to select End Search.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
etc.
2
1
1
2
VCR Function
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
Go To [0:00:00] Stop
OK
RETURN
MENU
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
2Press the OK or ‹ button.
Intro Scan
1Press the SEARCH button.
1Press the MENU button, then press the œ or
ƒ button to select FUNC. The Function
menu is displayed. Press the OK or ‹ button.
The VCR Function menu is displayed.
Press the œ or ƒ button to select Intro
Scan.
VCR Function
2Press the œ or ƒ button to select VCR
Function, then press the OK or ‹ button.
The VCR Function menu is displayed with
the Go To [0:00:00] selected.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
VCR Function
SETUP
Go To [0:00:00]
OK
RETURN
MENU
DVD End Search
Intro Scan
VCR
2Press the OK or ‹ button.
PROG
FUNC
3Press the ¦¦ or ‹‹ button depending
on the direction where your desired pro-
gramme is located.
OK
RETURN
MENU
• It can be displayed simply by pressing the
SEARCH button.
INTRO SCAN : ¦¦ ‹‹
3Press the OK or ‹ button again.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tape Counter
4When an Index mark is found the DVD-VCR
will playback the tape for 5 seconds, after
which it will continue searching for the next
Index mark
The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
INTRO SCAN : ¦¦
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.
5If you want to watch the tape from a
particular Index, press the ‹ll button twice.
Index Skip Search
This feature will enable you to fast
1Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the begin-
ning of a sequence:
forward/rewind to a specific point on a tape: e.g.
If you have recorded 3 different programmes on
a tape and you have rewound the tape to the
beginning, by using this feature you can go
directly to the start of programme 2 simply by
pressing the SEARCH button.
0:00:00
1Press the SEARCH button.
• Press the INFO button twice to display the
counter.
• Press the CLEAR button when you want to
set the tape counter to zero.
The VCR Function menu is displayed.
Press the œorƒ¤button to select Intro Scan.
VCR Function
Go To [0:00:00]
SETUP
2When you are ready,
End Search
DVD
• Start Playback or Recording.
Intro Scan
VCR
• Press the ■ button.
PROG
FUNC
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
¦¦ or ‹‹ button.
OK
RETURN
MENU
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 22).
2Press the OK or ‹ button.
3Press the ¦¦ or ‹‹ button twice more.
4These Index searches can be made forwards
(press the ‹‹ button) or backwards (press
the ¦¦ button).
Press the INFO button:
• Once to display the current function,
programme number, recording speed, time
and counter.
●
●
●
●
(¦¦ -20
0
+20 ‹‹)
This will take you directly to the start of the
desired programme is located.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
INDEX SEARCH : ¦¦ -06
• Four times to clear the display.
To cancel an Index search simply press the
‹ll or ■ button.
30 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Audio Language
DVD Functions
Setting Up the Language Features
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
If you set disc menu, audio and subtitle lan-
guage in advance, it will come up automatically
every time you watch a movie.
DVD Setup
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
Display Setup
VCR
Using the Disc Menu Language
Parental Setup :
Divx (R) Registration
PROG
FUNC
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
OK
RETURN
MENU
DVD Setup
2Press the OK or ‹¤button again.
Press the œ or ƒ¤button to select Audio,
then press the OK or ‹¤button.
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
Display Setup
VCR
Parental Setup :
Divx (R) Registration
Language Setup
PROG
FUNC
Disc Menu
Audio
: English
: English
: English
‹
‹
‹
OK
RETURN
MENU
Subtitle
2Press the OK or ‹¤button again.
Press the œ or ƒ¤button to select Disc
Menu, then press the OK or ‹ button.
OK
RETURN
MENU
Language Setup
3 Press the œ or ƒ button to select the
Disc Menu
Audio
: English
: English
: English
‹
‹
‹
required language.
Subtitle
Audio Language
‹
English
Français
Deutsch
Español
Italiano
Audio
OK
RETURN
MENU
Nederlands
Original
Others
3Press the œ or ƒ button to select the
required language.
OK
RETURN
MENU
Disc Menu Language
• Select Original if you want the default
soundtrack language to be the original
language the disc is recorded in.
• Select Others if the language you want is
not listed.
‹
English
Français
Deutsch
Español
Italiano
Disc Menu
Nederlands
Others
4Press the OK button.
OK
RETURN
MENU
• Select Others if the language you want is
not listed.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Audio Options
Using the Subtitle Language
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
DVD Setup
DVD Setup
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
Display Setup
VCR
Display Setup
VCR
Parental Setup :
Divx (R) Registration
Parental Setup :
Divx (R) Registration
PROG
FUNC
PROG
FUNC
OK
RETURN
MENU
OK
RETURN
MENU
2Press the OK or ‹¤button again.
Press the œ or ƒ¤button to select Subtitle,
then press the OK or ‹¤button.
2Press the œ or ƒ¤button to select Audio
Setup, then press the OK or ‹¤button. The
Audio Setup menu is displayed.
Language Setup
Audio Setup
Disc Menu
Audio
: English
: English
: English
‹
‹
‹
Dolby Digital Out
MPEG-2 Digital Out
DTS
: PCM
: PCM
: Off
‹
‹
‹
‹
‹
Subtitle
Dynamic Compression
PCM Down Sampling
: On
: On
OK
RETURN
MENU
OK
RETURN
MENU
3 Press the œ or ƒ button to select the
3Press the œ or ƒ button to select the
required language.
required item.
Subtitle Language
4Press the OK or ‹¤button to select the
Automatic
‹
English
Français
Deutsch
Español
Italiano
required option.
Subtitle
Dolby Digital Out
Nederlands
Others
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
OK
RETURN
MENU
• Bitstream: Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when
using the Digital Audio Output.
• Select Automatic if you want the subtitle
language to be the same as the language
selected as the audio language.
• Select Others if the language you want is
not listed.
Note
•
Be sure to select the correct Digital Output or no
audio will be heard.
4Press the OK button.
MPEG-2 Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
Note
•
Some discs may not contain the language you
select as your initial language; in that case the disc
will use its original language setting.
32 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
DTS
2Press the œ or ƒ button to select Display
Setup, then press the OK or ‹¤button.
• Off: Doesn’t output digital signal.
• On: Outputs DTS Bitstream via digital output
only. Select DTS when connecting to a
DTS Decoder
Display Setup
TV Aspect
: 4:3 L-Box
: Off
‹
‹
‹
Black Level
NTSC Disc Output
: PAL 60
Dynamic Compression
• On: To select dynamic compression.
OK
RETURN
MENU
• Off: To select the standard range.
3Press the œ or ƒ button to select TV Aspect,
PCM Down Sampling
press the OK or ‹¤button.
TV Aspect
• On: Select this when the amplifier connected
to the player is not 96KHz compatible. In
this case, the 96KHz signals will be down
converted to 48KHZ.
‹
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
• Off: Select this when the amplifier connected
to the player is 96KHz compatible. In
this case, all signals will be output with
out any changes.
OK
RETURN
MENU
4Press the œ or ƒ button to select the
required item, then press the OK button to
select the required option.
Notes
•
•
•
How to make the DVD menu disappear or return to
menu screen during set up; Press RETURN or ¦
button.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
TV Aspect
Depending on the type of television you have,
you may want to adjust the screen setting
(Aspect Ratio).
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
• 4:3 Letter Box :
Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the
screen.
Setting Up the Display Options
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
• 4:3 Pan Scan :
Select this for conventional size TVs when
you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off).
DVD Setup
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
Display Setup
VCR
Parental Setup :
Divx (R) Registration
• 16:9 Wide :
You can view the full 16:9 picture on your
widescreen TV.
PROG
FUNC
OK
RETURN
MENU
Black Level
Adjusts the brightness of the screen (On/Off).
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
NTSC Disc Output
Create Password
“NTSC” if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave “PAL60” as is.
Enter Password
–
–
–
–
Setting Up the Parental Control
RETURN
The Parental Control function works in conjunc-
tion with DVDs that have been assigned a rating
which helps you control the types of DVDs that
your family watches. There are up to 8 rating
levels on a disc.
The Re-enter Password menu is displayed to
confirm the password.
Create Password
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button. Press the œ or ƒ
button to select Parental Setup.
Re-enter Password
–
–
–
–
DVD Setup
RETURN
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
Display Setup
4Enter your password again.
VCR
Parental Setup :
Divx (R) Registration
The Use Password is set to Yes and the
Parental Setup menu is displayed.
The DVD-VCR is locked ( ).
PROG
FUNC
OK
RETURN
MENU
Parental Setup
2Press the OK or ‹¤button.
Use Password
Rating Level
: Yes
: 1
‹
‹
‹
The Use Password menu is displayed.
Change Password
Parental Setup
Use Password
: No
‹
OK
RETURN
MENU
OK
RETURN
MENU
Setting up the Rating Level
5Press the œ or ƒ button to select Rating
3Press the OK or ‹¤button again if you want
to use a password. The Enter Password
menu is displayed. Enter your password by
pressing the number buttons.
Level, then press the OK or ‹ button.
Parental Setup
Use Password
Rating Level
: Yes
: 1
‹
‹
‹
Change Password
OK
RETURN
MENU
34 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX(R) Registration
Rating Level
Level 8 Adult
Level 7
Please use your registration code to register
this DVD-VCR with the DivX(R) Video On
Demand service. This will allow you to rent and
purchase videos using the DivX(R) Video On
Demand format. To learn more go to
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
OK
RETURN
MENU
1Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD.
The DVD Setup menu is displayed.
6Press the œ or ƒ button to select the required
level (e.g. Level 6). Press the OK or ‹ button.
• Discs that contain Level 7 will now not play.
DVD Setup
Changing the Password
SETUP
DVD
Language Setup
Audio Setup
‹
‹
‹
‹
‹
7Press the œ or ƒ button to select Change
password.
Display Setup
VCR
Parental Setup :
DivX(R) Registration
Parental Setup
PROG
FUNC
Use Password
Rating Level
: Yes
: 1
‹
‹
‹
OK
RETURN
MENU
Change Password
2Press the OK or ‹ button. Press the œ or ƒ
button to select DivX(R) Registration.
DVD Setup
OK
RETURN
MENU
SETUP
Language Setup
Audio Setup
‹
‹
‹
‹
‹
DVD
VCR
8The Enter New Password is displayed. Enter
Display Setup
your password by pressing the number buttons.
Parental Setup :
DivX(R) Registration
PROG
FUNC
Change Password
OK
RETURN
MENU
Enter New Password
3Press the OK or ‹ button. A message is dis-
–
–
–
–
played.
DivX(R) Registration
RETURN
Your registration code is: XXXXXXXX .
Please use this code to register this
player with the DivX(R) Video On Demand
service. This will allow you to rent and
purchase videos using the DivX(R) Video
On Demand format. To learn more go to
The Re-enter Password is displayed to
confirm the password.
Change Password
RETURN
MENU
Re-enter Password
–
–
–
–
DivX, DivX Certified,
and associated logos
are trademarks of
RETURN
DivXNetworks, Inc and
are used under license.
9Enter your password again.
• How to make the DVD menu disappear or
return to menu screen during set up; Press
the RETURN or ¦ button.
• If you have forgotten your password, refer to
Forgot Password in the Troubleshooting
Guide.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware Upgrade
How to make an update disc
Write the downloaded file onto a blank CD-R
disc, using the following settings.
Please read the below information before
update procedure.
1Download the software update file from the
Samsung Internet Site
Support/Download/index. aspx).
After checking your DVD-VCR Model name
on the rear, download a file using the Search
Your Model/Name window.
1The following events may interrupt the update
procedure and may result in permanent
damage to DVD-VCR.
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing.
2Write the file to disc using CD-R driver of your
computer.
Software update file name: PC7CA.rom
Please do not change the file name.
If you change the file name, DVD-VCR do not
recognize the update CD-R
2Playback can only support English Subtitle.
If you have any question or any problem,
please feel free to contact your nearest
SAMSUNG Service Center and agency.
DivX Feature Table
• A DivX disc may not be playable as playback
depends on the file format, the recording
conditions, the recording method, etc.
Note
•
•
Recommended Application Program
- Nero Burning / Easy CD Creator.. etc
Option
• A video file that has not been interleaved
supports only voice or video.
- Multisession; No Multisession
- CD close or Finalized CD
• Check the DivX disc format as this is not an
error.
•
In order to increase Disc Playability, add a dummy
file (over 100MB) together with the update file in
CD-R, not CD-RW. (The Dummy File can be used
any kind of file except jpg, mp3, wma file. Zip file
format is recommended).
• Normal operation is only possible when the
screen size is 720X480 pixels or less.
• A maximum of 65 characters for the caption
title of a DivX disc is supported.
• Unsupported caption content will be
displayed using asterisks (*).
DivX can be divided into Video and Audio.
S
upported CODEC formats
DivX3, DivX4, DivX5 (GMC 1WP)
*.avi, *.mpeg
Supported file format
s
Supported audio formats
Supported caption formats
AC3, MP3, WMA
* .SMI, * .SRT, * .SUB
36 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
.
5After update is completed, you have to power
off the unit and eject the update disc by using
the OPEN/CLOSE button once the unit turns
on.
Update procedure
1Insert the update CD-R disc with the software
update. It takes about 30 seconds to load the
update disc.
6Firmware update is ended. Turn on your
2READING appears at the left upper side of
player and enjoy a DivX movie.
the screen.
READING
Code Ver
: XXXXXXXXX
: XXXXXXXXX
Servo Ver
Loading
• In order to check new version like the
upper, press the INFO button after
opening a tray.
3ERASE and WRITE appears in turn at the
same location for about 40 sec during
firmware update.
Note
•
The display can be changed depend on its
version and without any notice.
ERASE
RETR 00
Special Playback Features
During DVD/VCD/CD playback you can select
from the following special playback options.
To resume normal playback, press the ‹ll but-
ton.
Still
4It will be displayed DONE if the update is
Press the ‹ll button during playback.
• The picture will still and the audio will mute.
• To resume playback, press the ‹ll button.
• If the player is left in still mode for 5 minutes, it
will stop automatically.
completed successfully.
DONE
RETR 00
Note
•
Frame Advance operates only in the forward direc-
tion.
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Display Function
Frame Advance (Step)
To view the current Title, Chapter/Track, and
counter position, press the INFO button during
DVD playback. The display screen can also be
used to quickly choose a title, chapter/track, or
playing time.
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one
frame at a time.
• Audio is muted during frame advance mode.
• Press the ‹ll button to resume normal play-
back.
1 View the Display
During DVD/VCD/CD playback, press the
INFO button.
Skip Forward/Back
• To make the screen disappear, press the
INFO button again.
DVD
While a CD or DVD disc is in play mode, press
the l¦¦ or ‹‹l button to jump forward and
backward through disc chapters/tracks.
• Skip Forward (‹‹l) will jump to the next
chapter/track.
• Skip Back (l¦¦) will jump to the beginning of
the current chapter/track.
• Press the l¦¦ button again to jump to the
beginning of the previous chapter/track.
ENG 5.1CH
ENG
Off
MOVE
OK
Search Forward/Back
VCD
CD
While a disc is in play mode, press the ¦¦ or
‹‹ button to visually search forward/backward
at 2X - 4X - 8X - 16X - 32X - 128X speed. Press
the ‹ll button to resume normal speed.
• VCD/CD : 2X - 4X - 8X - 16X - 32X.
Off
Off
Slow Motion
MOVE
OK
MOVE
OK
During playback, press the ‹ll button to still the
image. Then press the ‹‹ꢀ¤‹‹l button to play
in slow motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
2Press the œ¤or ƒ button to select the desired
item.
3Press the ¦¤or ‹ button to make the desired
setup, then press the OK button.
• You may use the number buttons of the
remote control to directly access a title,
chapter or to start the playback from the
desired time.
Stop/Resume
• Press the ■ button once to stop playback.
To resume the DVD/VCD/CD from the point
where the disc stopped, press the ‹ll button.
• Press the ■ button twice to completely stop
playback. The next time you press the ‹ll
button, the disc will start over from the begin-
ning.
4To make the screen disappear, press the
INFO button again.
To access the desired title when
there is more than one in the disc.
For example, if there is more than
one movie on a DVD, each movie
will be identified. A DVD may
contain several different titles.
For example, if a disc contains four
different movies, each might be con-
sidered a title.
Note
•
Slow motion operates only in the forward direction.
Slow motion is not available for CD.
38 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
. If you are using a 16:9 TV
Most of DVD discs are recorded in
chapters so that you can quickly find
a specific passage.
Each Title on a DVD is usually divid-
ed into chapters (similar to tracks on
an audio CD).
For 16:9 aspect ratio discs
- Wide Screen
Displays the content of the DVD title in
16:9 aspect ratio.
- Screen Fit
The top and bottom portions of the screen
are cut off. When playing a 2.35:1 aspect
ratio disc, the black bars at the top and
bottom of the screen will disappear. The
picture will look vertically stretched.
(Depending on a type of disc, the black
bars may not disappear completely.)
- Zoom Fit
Allows playback of the film from a
desired time.
Refers to the language of the film
soundtrack. In the example, the
soundtrack is played in English
5.1CH.A DVD disc can have up to
eight different soundtracks.
The top, bottom, left and right of the
screen are cut off and the central portion
of the screen is enlarged.
For 4:3 aspect ratio discs
- Normal Screen
Displays the content of the DVD title in
16:9 aspect ratio. The picture will look
horizontally stretched.
Refers to the subtitle languages
available in the disc.
You will be able to choose the subti-
tles language or, if you prefer, turn
them off from the screen.
- Screen Fit
The top and bottom portions of the screen
are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions
of the screen are cut off and the central
portion of the screen is enlarged.
A DVD disc can have up to 32
different subtitles.
A surround sound effect is generat-
ed using only two front speakers.
Note
•
When in VCD 2.0 is in Menu Off mode only, this
function works. You can choose Menu On or Menu
Off by using the DISC MENU button.
• The screen zoom mode operates differently
depending on the screen setting in the initial
DVD menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect
ratio in the initial setup.
Adjusting the Aspect Ratio (EZ View)
This function may be different depending on the
type of disc.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
- Wide Screen
Displays the content of the DVD title in
16:9 aspect ratio.
To play using aspect ratio (DVD)
1Press the EZ VIEW button.
• The screen size changes when the button is
pressed repeatedly.
- Screen Fit
The top and bottom portions of the screen
are cut off. When playing a 2.35:1 aspect
ratio disc, the black bars at the top and
bottom of the screen will disappear. The
picture will look vertically stretched.
(Depending on a type of disc, the black
bars may not disappear completely.)
- Zoom Fit
• The screen zoom mode operates differently
depending on the screen setting in the initial
DVD menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect
ratio in the initial setup.
The top, bottom, left and right of the
screen are cut off and the central portion
of the screen is enlarged.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
For 4:3 aspect ratio discs
- Normal Screen
2Press the ¦ or ‹ button to select the desired
Displays the content of the DVD title in
16:9 aspect ratio. The picture will look
horizontally stretched.
subtitle language.
3Press the œ or ƒ button to select On.
• To make the menu bar disappear, press the
SUBTITLE button again.
- Screen Fit
The top and bottom portions of the screen
are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
EN
G
On
The top, bottom, left and right portions
of the screen are cut off and the central
portion of the screen is enlarged.
Notes
If you are using a 4:3 TV
For 16:9 aspect ratio discs
•
•
The subtitle languages are represented by
abbreviations.
- 4:3 Letter Box
This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
Displays the content of the DVD title in
16:9 aspect ratio. The black bars will
appear at the top and bottom of the
screen.
•
•
A DVD disc can contain up to 32 subtitle languages.
How to have the same subtitle language come up
whenever you play a DVD; Refer to “Using the
Subtitle Language” on page 32.
- 4:3 Pan Scan
The left and right portions of the screen
are cut off an the central portion of the
16:9 screen is displayed.
Selecting the Audio Language
- Screen Fit
The top and bottom portions of the screen
are cut off and a full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions of
the screen are cut off and the central
portion of the screen is enlarged.
Multiple language/audio setup options, such as
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2
Channel audio are available on some DVDs.
You can use the AUDIO button to quickly view
and select the options available on a disc.
1During playback, press the AUDIO button.
For 4:3 aspect ratio discs
- Normal Screen
DVD
Displays the content of the DVD title in 4:3
aspect ratio.
- Screen Fit
The top and bottom portions of the screen
are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
VCD, CD
Stereo
The top, bottom, left and right portions of
the screen are cut off and the central
portion of the screen is enlarged.
• Press the ¦ or ‹ button to select stereo,
Left or Right.
Selecting the Subtitle Language
Some DVDs provide subtitles in one or more
languages. You can use the SUBTITLE button
to quickly view and change settings.
2Press the ¦ or ‹ button to select the desired
language or audio setup on the DVD.
• Languages are represented by abbrevia-
tions, e.g. ENG for English.
1During playback, press the SUBTITLE button.
ENG
On
40 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
2Press the ‹ button, then press the œ or ƒ
Notes
This function depends on what languages are
button to select ZOOM.
•
encoded on the disc and may not work with all
DVDs.
DVD Function
Title Menu
SETUP
Disc Menu
•
•
A DVD disc can contain up to 32 subtitle
languages.
DVD
VCR
Info
Zoom
Bookmark
Repeat
EZ View
How to have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 32.
PROG
FUNC
OK
RETURN
MENU
Changing the Camera Angle
3Press the OK or ‹ button.
Press the œ / ƒ or ¦ / ‹ button to select
the part of the screen you want to zoom in on,
then press the OK button
Some DVD Movies provide you with various
camera angle views on the same scene if disc
contains multiple angles.
1Press the ANGLE button.
2Press the ¦ or ‹ button to select a camera
angle you may wish to see.
• Press the OK button to Zoom in
2X/4X/2X/Normal in order.
• You can also select Zoom function directly
using ZOOM button on the remote control.
Zoom
Marks
Up to three Bookmarks can be inserted for a
given DVD/VCD, allowing you to quickly jump to
your favorite scene or song.
1During playback, press the MENU button.
Press the œ or ƒ button to select FUNC,
then press the OK or ‹ button.
The Function menu is displayed.
1During playback, press the MARK button.
Function
DVD Function
VCR Function
‹
‹
SETUP
DVD
VCR
2Press the ¦ or ‹ button to select one of the
three mark placeholders (- - -).
PROG
FUNC
Keep on playing the DVD up to the scene you
want to mark, then press the OK button. The
placeholder (-) is changed to a number (1, 2
or 3).
OK
RETURN
MENU
C
L
E
A
R
1
—
—
1
• You may continue to set up to three marks.
Press the MARK button again to exit the
mark menu.
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Cancel Chapter/Title
Recalling a Maked Scene
1Press the REPEAT button to open the repeat
1 During playback, press the MARK button.
menu.
2 Press the ¦ or ‹ button to select the mark
2 Press the ¦ or ‹ button to selected Off,
you want to recall.
then press the OK button.
DVD
3 Press the ‹ll button to play the mark.
Chapter
Title
Off
Clearing Mark
VCD, CD
1 During playback, press the MARK button.
Track
Disc
Off
2 Press the ¦ or ‹ button to select the mark
you want to delete.
• It is available to press the CLEAR button in
order to stop repeat play.
3 Press the CLEAR button to delete the mark.
• Press the MARK button again to exit the
mark menu.
A to B Repeat
A to B Repeat feature enables you to repeat the
designated section on a DVD or VCD/CD. To
activate, mark where to start (A) and where to
end (B) of the section you want to watch.
Notes
•
Up to three scenes may be marked at a timer.
•
When VCD 2.0 is in Menu Off mode only,
this function works.
1Press the REPEAT button while in playback
mode, then press the ¦ or ‹ button to select
•
Depending on the disc, the mark function may not
work.
A-.
DVD
Chapter
Title
Off
Repeat Chapter/Title
VCD, CD
You can repeat a single chapter or a complete
title.
Off Track
Disc
1Press the REPEAT button while in playback
mode to open the repeat menu.
The current repeat mode is displayed.
2Press the OK button at the beginning of the
segment you want to repeat (Point A).
2Press the ¦ or ‹ button to select
The B is selected.
DVD
Chapter/Title. Press the OK button to repeat
the current chapter/Title.
DVD
Chapter
Title
Off
Off
Chapter
Title
VCD, CD
Off
Track
Disc
VCD, CD
Off
Disc
Track
3Press the OK button again at the end of the
segment you want to repeat (Point B).
The segment will begin repeating in a
continuous loop.
• The menu will display Track in place of
Chapter if you are playing a VCD/CD.
42 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA Play
Cancel A-B Repeat
1Press the REPEAT button to open the repeat
If you insert an MP3/WMA Disc into
the DVD-VCR, you can see the folder directory.
menu.
MP3/WMA Play Function
2Press the ¦ or ‹ button to selected Off, then
press the OK button.
1Press the œ or ƒ button to select the desired
DVD
music folder, then press the OK button.
Chapter
Title
Off
Total : 3/4
ROOT
ROOT
AVI
JPEG
MP3
VCD, CD
WMA
Track
Disc
Off
• It is available to press the CLEAR button in
order to stop repeat play.
• Up to 7 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the ƒ¤button to display them.
Notes
•
When in VCD 2.0 mode (MENU ON mode),
this function does not work.
2Press the œ or ƒ button again to select a
music file. Press the OK button to begin play-
back of a music file.
•
Use the DISC MENU button in the VCD 2.0 mode
to select MENU ON or OFF.
Selecting the Audio Language
Total : 1/3
..
ROOT
AVI
JPEG
MP3
Multiple language/audio setup options, such as
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2
Channel audio are available on some DVDs.
You can use the AUDIO button to quickly view
and select the options available on a disc.
MP3
MP3
MP3
A
B
C
WMA
1During playback, press the AUDIO button.
DVD
Repeat
1Press the REPEAT button in play mode to
hear only music continuously and press it
once again to release.
VCD, CD
Stereo
Total : 1/3
..
ROOT
AVI
JPEG
MP3
MP3
MP3
MP3
A
B
C
• Press the ¦ or ‹ button to select stereo,
Left or Right.
WMA
2Press the ¦ or ‹ button to select the desired
language or audio setup on the DVD.
• Languages are represented by abbrevia-
tions, e.g. ENG for English.
Repeat file
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-R MP3/WMA discs
Program & Random Play
(CD/MP3/WMA)
When playing CD-R/MP3 or WMA discs,
please follow all the recommendations for
CD-R above, plus the comments below:
Your MP3 or WMA files should be ISO
9660 or JOLIET format.
You can listen to songs randomly or in the
desired sequence.
ISO 9660 format and Joliet MP3 or WMA
files are compatible with Microsoft's DOS
and Windows, and with Apple's Mac. These
two formats are the most widely used.
When naming your MP3 or WMA files do
not exceed 8 characters, and place
".mp3, .wma" as the file extension.
General name format of: Title.mp3. or
Title.wma. When composing your title,
make sure that you use 8 characters or
less, have no spaces in the name, and
avoid the use of special characters
including: (.,/,\,=,+).
Program Play
1Press the MODE button in the stop mode.
Press the ¦ or ‹ button to select PROGRAM.
Press the OK button.
PROGRAM
RANDOM
Use a decompression transfer rate of at
least 128Kbps when recording MP3 files.
Sound quality with MP3 files basically
depends on the rate of compression
/decompression you choose. Getting audio
CD quality sound requires an analog/digital
sampling rate, that is conversion to MP3
format, of at least 128Kbps and up to
160Kbps. However, choosing higher rates,
like 192Kbps or more, only rarely give
better sound quality. Conversely, files with
decompression rates below 128Kbps will
not be played properly.
Use a decompression transfer rate of at
least 64Kbps when recording WMA files.
Sound quality with WMA files basically
depends on the rate of compression
/decompression you choose. Getting audio
CD quality sound requires an analog/digital
sampling rate, that is conversion to WMA
format, of at least 64Kbps and up to
RETURN
OK
2Press the œ/ƒ,¦/‹ buttons to select the first
track to add to the program. Press the OK
button. The selection numbers are displayed in
the Program Order box.
PROGRAM 01
Program Order
MP3
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
RETURN
CLEAR
3Press the ‹ll button.
The disc will be played in programmed order.
192Kbps. Conversely, files with decompres-
sion rates below 64Kbps or over 192Kbps
will not be played properly.
Do not try recording copyright protected
MP3 files.
Cancel Program play
During playback, press the CLEAR button.
Certain "securized" files are encrypted and
code protected to prevent illegal copying.
These files are of the following types:
Windows MediaTM (registered trade mark
of Microsoft Inc) and SDMITM (Registered
trade mark of The SDMI Foundation). You
cannot copy such files.
Random Play
1Press the MODE button in the stop mode.
2Press the ¦ or ‹ button to select RANDOM.
Press the OK button.
The disc will be played in random order.
Important :
The above recommendations cannot be
taken as a guarantee that the DVD-VCR
will play MP3 recordings, or as an assur-
ance of sound quality. You should note that
certain technologies and methods for MP3
file recording on CD-Rs prevent optimal
playback of these files on your DVD
player (degraded sound quality and in some
cases, inability of the player to read the
files).
44 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
If no buttons on the remote control are pressed for
PROGRAM
RANDOM
•
10 seconds, the menu bar will disappear.
Press the DISC MENU button on the remote
control to display the menu bar.
Album Mode
Press the ¦ or ‹ button to select
Press the OK button.
RETURN
OK
.
The album mode is displayed.
..
ROOT
AVI
JPEG
MP3
Album
Photo : 1/215
MP3
MP3
MP3
A
B
C
WMA
• Depending on the disc, the Program and
Random Play functions may not work.
• To resume normal play, press the CLEAR
button.
• Press the œ/ƒ,¦/‹ buttons to select the
required picture, then press the OK button.
The selected picture is displayed.
• Press the l¦¦ or ‹‹l button to display the
previous or next 6 pictures.
Picture CD Playback
If you insert a Picture (JPEG) CD Disc into the
DVD-VCR, you can see the folder directory.
Rotation
Press the ¦ or ‹ button to select
.
Each time the OK button is pressed, the picture
rotates 90 degrees clockwise.
1Press the œ or ƒ button to select the picture
you want to view, then press the OK button.
The selected picture is displayed.
Photo : 1/215
OK
RETURN
Total : 1/215
ROOT
ROOT
JPEG01
JPEG
JPEG
JPEG
JPEG
JPEG
JPEG
JPEG
JPEG02
JPEG03
JPEG04
JPEG05
JPEG06
JPEG07
Zoom
2Press the l¦¦ or ‹‹l button to display the
Press the ¦ or ‹ button to select
.
previous or next picture.
Each time the OK button is pressed, the picture
is enlarged up to 4X.
Photo : 1/215
(Normal ➝ 2X ➝ 4X ➝ Normal)
OK
RETURN
Photo : 1/215
RETURN
OK
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide show
CD-R JPEG Discs
• Only files with the “.jpg” and “.JPG” extensions
can be played.
Press the ¦ or ‹¤button to select
.
Press the OK button. The 3 icons are displayed
for time interval.
• If the disc is not closed, it will take longer to
start playing and not all of the recorded files
may be played.
Photo : 1/215
RETURN
OK
• Only CD-R discs with JPEG files in ISO 9660
or Joliet format can be played.
• The name of the JPEG file may not be longer
than 8 characters and should contain no blank
spaces or special characters (. / = +).
• Only a consecutively written multisession disc
can be played. If there is a blank segment in
the multisession disc, the disc can be played
only up to the blank segment.
Timer :
OK
RETURN
• When playing a Kodak Picture CD, only the
JPEG files in the pictures folder can be
played.
• Picture discs other than Kodak Picture CD
may take longer to start playing or may not
play at all.
Press the ¦ or ‹ button to select one of these.
Press the OK button.
The pictures change automatically with
about an 6 second interval.
The pictures change automatically with
about an 12 second interval.
The pictures change automatically with
about an 18 second interval.
• Depending on the file size, each interval
between images may take longer or shorter
than the manual suggests.
46 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX/MPEG4 Playback
DivX/MPEG4 Special Playback
Features
1When the disc is inserted, the file structure of
the disc will be shown. Depending on the file
format, a different icon will appear next to
During DivX/MPEG4 playback you can select
from the following special playback options.
each file. The
highlighted.
Use œ or ƒ button to select the movie file,
and then press OK or ‹ll.
and
files will have been
1Still
Press the ‹ll button on the remote control
during playback.
Result : When the 'Reading Index......'
message is displayed, wait for a
second or two. The movie will be
played back.
• The picture will still and the audio will mute.
• To resume playback, press the ‹ll button.
• If the player is left in Still mode for 5
minutes, it will stop automatically.
2Frame Advance (Step)
DivX
DivX
DivX
While in playback mode, press the
F.ADV/STEP button on the remote control to
advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press ‹ll to resume normal playback.
3Slow Motion
If the "Cannot support" message is
displayed, the selected file cannot
be played back.
During playback, press the ‹ll button to Still
the image. Then use the Search ‹‹ to play in
slow motion at variable speeds.
• Each press increases the slow motion
speed playback to 1/8, 1/4 or 1/2 normal
speed.
• Audio is muted during slow motion playback.
• The Search function may not operate
depending on the condition of the disc.
2To navigate to a specific time while viewing
the movie, press the INFO button.
The file format of the current file (
or
)
and time information will be displayed.
DivX
4Stop/Resume
1/1
• Press the ■ button once to stop playback. To
resume the DivX/MPEG4 from the point
where the disc stopped, press the ‹ll but-
ton.
~
5Search Forward/Backward
• During play press the SEARCH button and
press again to search at faster speed (2x, 4x,
8x).
3Use the number buttons on the remote control
to enter the time to jump to that time in the
movie.
Note
•
Frame advance and slow motion operate only in the
forward direction.
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
6Zoom
During play, press the MENU button on the
remote control. Then press the œ or ƒ button
to select the FUNC , then press the OK or ‹
button. The Function menu is displayed.
Function
DVD Function
VCR Function
‹
‹
SETUP
DVD
VCR
PROG
FUNC
OK
RETURN
MENU
• Press the œ or ƒ button to select DVD
Function. Press the OK or ‹ button.
• Press the œ or ƒ button to select ZOOM,
then press the OK button.
DVD Function
Title Menu
SETUP
Disc Menu
DVD
VCR
Info
Zoom
Bookmark
Repeat
EZ View
PROG
FUNC
OK
RETURN
MENU
• Press the œ/ƒ or ¦¤/ ‹button to select the
part of the screen you want to zoom in on,
then press the OK button.
The screen will be enlarged to twice the
normal size.
Auto Scaling : CIF(100kbps)~D1(784kbps)
resolution. If the file resolution
is times automatically. So you
can see the more larger screen.
48 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Rated voltage
Power consumption
Weight
AC 220 - 240V, 50Hz
19Watts
3.9Kg
General
Size
430mm X 282mm X 82mm
+5°C ~ +40°C
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
RCA jack : 1.0Vp-p (unbalanced) 75Ω
RCA jack : -8dBm, 47Kohm unbalanced
RCA Jack
Video input (Rear)
Audio input (Rear)
Input (Front)
Input
RF out
UHF 21-69 (Initial CH36) : New Zealand model
UHF 28-69 (Initial CH38) : Australia model
RCA jack
Output
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Digital audio out (COAXIAL, OPTICAL)
RCA jack
Video (DVD only)
Tape format
S-Video out, Component out : RCA jack
VHS type video tape
PAL,MESECAM,NTSC4.43, NTSC playback on PAL TV
B/G,D/K : New Zealand model
Colour system
VCR Tuning system
B/B
: Australia model
Video S/N
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
DVD, VCD, CD,
Resolution
Audio S/N
Audio frequency characteristics
Disc
DVD
Audio S/N
100dB
Audio dynamic range
95dB
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
If you are unable to solve the problem after reading the below instructions, note:
•
•
•
The model and serial number on the rear of your DVD-VCR.
The warranty information.
A clear description of the problem.
Then contact your nearest SAMSUNG after-sales service.
Problem
Solution
No power
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme
was not recorded
◆
◆
◆
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
◆
◆
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
You cannot see normal broadcasts
Noise bars or streaks on playback
◆
◆
Check the tuner or external setting. It should be on tuner.
Check the TV or VCR aerial connections.
◆
◆
Press the TRK (
œ
or
ƒ
)
buttons to minimize this effect.
When the
button is pressed
II
A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK ( or buttons
during slow motion to minimize this effect.
‹
during playback, the still picture
has severe “noise bars” streaks
œ
ƒ)
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads
If when tuning in your TV to the
1. Remove the aerial input plug the socket marked (Aerial symbol)
on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVD-
VCR” (See page 14).
3. Carry out the instructions “Setting the VCR output Channel”
(See page 19), move the channel number several channels
down from the original setting. (Example: from 60 to 69).
4. Replace the aerial plug into the socket marked (Aerial symbol)
on the rear of the DVD-VCR.
DVD-VCR, TV does not find the Screen
or the pattern when found suffers from
interference, it may be due to the DVD-VCR
output channel clashing with the normal
TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following way.
5. Re-tune your TV to the DVD-VCR again by following instructions
“Tuning Your Television for the DVD-VCR” (See page 14).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
50 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide (DVD)
Solution
Problem
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD.
Disc does not play.
P3
◆
5.1 channel sound is reproduced only when the following conditions are met.:
1) The DVD-VCR is connected with the proper amplifier.
5.1 channel sound is not
being reproduced.
P11
P 32~33
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “5.1 ch” mark on the outside.
Check if your audio system is connected and working properly.
◆
◆
◆
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
The
screen.
icon appears on
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
P31~46
P31~35
Playback mode differs
from the Setup menu
selection.
◆
Some of the functions selected in the Setup menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
be changed.
◆
◆
The screen ratio is fixed on your DVDs.
P33
P32
Make sure you have selected the correct Digital Output in the Audio Options
Menu.
No audio.
◆
Press STANDBY/ON with no disc in the unit. Press the ‹‹ button on the
front panel for five seconds. Power off and on the DVD-VCR by pressing
STANDBY/ON button. The parental mode is now unlocked as indicated on the
display. You can now set your rating level and change your password to a new
number.
Forgot password.
P34~35
◆
◆
Check the contents of the instruction book that contains the explanations
regarding the current problem and follow the procedure once again.
If the problem still cannot be solved, please contact your nearest authorized
service center.
If you experience other
problems.
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
Country
Customer Care Center
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
Web Site
CANADA
North America
MEXICO
U.S.A
ARGENTINE
0800-124-421
BRAZIL
4004-0000
CHILE
800-726-7864 (SAMSUNG)
0-800-507-7267
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
1-800-10-7267
800-6225
1-800-299-0013
Latin America
1-800-234-7267
800-7267
1-800-682-3180
REP. DOMINICA
1-800-751-2676
TRINIDAD & TOBAGO
1-800-7267-864
VENEZUELA
0-800-100-5303
COLOMBIA
BELGIUM
01-8000112112
02 201 2418
844 000 844
Distributor pro Českou republiku :
Samsung Zrt., česka organizační složka
Vyskočilova 4, 14000 Praha 4
38 322 887
CZECH REPUBLIC
DENMARK
FINLAND
www.samsung.com/fi
09 693 79 554
3260 SAMSUNG or
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,14/Min)
06-80-SAMSUNG (7267864)
800-SAMSUNG (7267864)
0032 (0)2 201 24 18
0900 20 200 88 (€ 0,10/Min)
231 627 22
FRANCE
GERMANY
HUNGARY
ITALIA
Europe
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
0 801 801 881
PORTUGAL
SLOVAKIA
SPAIN
80 8 200 128
0800-SAMSUNG (726786)
902 10 11 30
SWEDEN
U.K
Republic of Ireland
Switzerland
RUSSIA
KAZAHSTAN
UZBEKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
08 585 367 87
0870 SAMSUNG (7267864)
0818 717 100
0800-7267864
8-800-200-0400
8-800-080-1188
8-800-120-0400
CIS
8-800-502-0000
8-800-77777
800-7267
800-7267
AUSTRALIA
CHINA
HONG KONG
1300 362 603
800-810-5858, 010-6475 1880
3698 - 4698
3030 8282
INDIA
1800 110011
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
0800-112-8888
0120-327-527
Asia Pacific
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
THAILAND
02-689-3232
TAIWAN
VIETNAM
0800-329-999
1 800 588 889
SOUTH AFRICA
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
Middle East & Africa
U.A.E
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
☎
AK68-01289A(01)
Download from Www.Somanuals.com. All Manuals Search And Download.
|