DVD VIDEO RECORDER
Operating Instructions
Model No. DVD-R4000
Dear customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read
these instructions completely. Please keep this manual for future
reference.
Region number supported by this unit
Region numbers are allocated to DVD players and software
according to where they are sold.
≥The region number of this unit is “1”.
≥The unit will play DVDs marked with labels containing “1” or
“ALL”.
[For\U.S.A.]only]
The warranty can be found on page 56.
[For\Canada]only]
Example:
The warranty can be found on page 57.
1
2
ALL
1
Para la instalación y las operaciones básicas del
aparato, existe una guía en español en las
páginas 58 a 63.
4
This manual was printed with soy based ink.
P
PC
RQT6920-P
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
10) Protect the power cord from being walked on or pinched partic-
ularly at plugs, convenience receptacles, and the point where
3) Heed all warnings.
they exit from the apparatus.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
11) Only use attachments/accessories specified by the manufac-
turer.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
Features
This unit allows recording of high quality video on
DVD-RAM, the compact and durable digital media with
fast random access. This media also out performs past
tape formats in ease of operation.
∫ MP3 disc play (➜page 21)
You can also play MP3 files recorded on CD-R and CD-RW, as well
as DVD-RAM, DVD-R, DVD-Video, Video CDs and CDs.
∫ Progressive Scan
∫ Exceptional sound and picture quality when
By connecting the component video terminal of this unit to a pro-
gressive scan television, it is possible to enjoy the high quality pic-
ture rendered by the progressive scan function.
recording
≥Audio is recorded using Dolby Digital stereo, enabling high qual-
ity sound recordings.
≥The encoder system used for recording is called “Hybrid VBR”
and allows high quality recordings.
∫ Quick View (➜page 19)
You can speed up play to make checking the contents faster. Both
video and sound are played faster.
∫ Fast access to the program you want to watch
∫ The FUNCTIONS menu shows you most of the
(➜page 17) [RAM] [DVD-R]
features you can use (➜page 23)
Use the Direct Navigator to find a program you have recorded and
start play.
The FUNCTIONS menu has most of the features and functions you
are likely to use regularly. Just select the icon for the operation you
want to perform.
∫ Make your own DVD-Video
≥Finalizing a DVD-R that has been recorded on produces an origi-
nal DVD-Video in accordance with DVD-Video standards.
≥In addition to DVD-Video movie software, this unit can also play
other types of discs including audio CDs and Video CDs. This
means that this unit has the potential to play a central role in your
home entertainment, from high-end home theater through to CD
playback.
∫ Watch a program while you are recording it
(➜page 22) [RAM]
Chasing play
You can watch a program from the start while you are still recording it.
Simultaneous recording and play
You can record a program while watching one you recorded
previously.
∫ Maximum 12 hours on DVD-RAM
≥Using a double sided, 9.4 GB DVD–RAM allows you to record a
maximum of 12 hours (6 hours continuously).
≥You can also use the FR (Flexible Recording) mode to fit record-
ings efficiently onto the available space on the disc.
Time Slip
You can jump back to review a piece of action you missed while
recording by pressing the time slip button.
≥During playback, you can specify a length of time to jump to the
scene you wish to view.
∫ Editing your recording [RAM]
≥You can divide programs (➜page 32).
≥Use play lists (➜page 28) to select your favorite scenes and rear
range them to play in any order you like.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or disc, and accepts no responsibility and offers no compensation for any subsequent damage caused by such
loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.
3
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Getting started
Editing
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Entering text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Creating play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Playing play lists, Playing play list scenes. . . . . . . . . . . . . . . .29
To erase a play list or a play list scene during playback. . . . .29
Editing play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Editing programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Disc setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Setting up
STEP 1 Antenna and television connections . . . . . . . . . . . . . . . 5
STEP 2 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 3 Plug-in Auto Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 4 VCR Plusi guide channel settings . . . . . . . . . . . . . . . . 8
STEP 5 Set up to match your television . . . . . . . . . . . . . . . . . . 10
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced operation
Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Common procedures, Disc menu . . . . . . . . . . . . . . . . . . . . . .36
Play menu, Audio menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Video menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
On-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Home Theater. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Connecting a cable TV box/satellite receiver . . . . . . . . . . . . .41
Connecting an amplifier or system component . . . . . . . . . . .42
Connecting other video equipment . . . . . . . . . . . . . . . . . . . . .43
Other antenna connections . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Other antenna connection to the unit . . . . . . . . . . . . . . . . . . .44
Other antenna connection from the unit to the television. . . . .44
Changing the remote control code . . . . . . . . . . . . . . . . . . . . . .45
Changing the unit’s settings . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Summary of settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Clock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Recording
Recording television programs . . . . . . . . . . . . . . . . . . . . . . . . . 14
Inserting discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Recording modes and approximate recording times in hours 15
Watching the television while recording . . . . . . . . . . . . . . . . . 15
Recording from a video cassette recorder . . . . . . . . . . . . . . . 15
Recording the best quality pictures in the remaining time
—Flexible Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Playing back
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
When a menu screen appears on the television . . . . . . . . . . . 17
Position Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the Direct Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To erase a program that is being played back . . . . . . . . . . . . 17
Other methods of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Skipping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Starting play from a selected program, title, chapter, or track. 18
Skipping a minute forward—CM Skip . . . . . . . . . . . . . . . . . . . 18
Selecting an amount of time to skip—Time Slip . . . . . . . . . . . 19
Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . . 19
Quick View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Marking places to play again—MARKER . . . . . . . . . . . . . . . . . 20
Marking positions directly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using on-screen menus to mark positions . . . . . . . . . . . . . . . 20
Using menus to play MP3 discs . . . . . . . . . . . . . . . . . . . . . . . . 21
Playing while you are recording . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing from the beginning of the program you are recording
—Chasing Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Simultaneous rec and play . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reviewing the recorded images while recording—Time Slip . 22
Changing audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the FUNCTIONS window . . . . . . . . . . . . . . . . . . . . . . . . . 23
Reference
Glossary, Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Limited Warranty (ONLY FOR U.S.A.) . . . . . . . . . . . . . . . . . . . .56
Limited Warranty (ONLY FOR CANADA). . . . . . . . . . . . . . . . . .57
Español
Instalación básica. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Conexiones del televisor y de la antena . . . . . . . . . . . . . . 58
Plug-in para Sintonización automática . . . . . . . . . . . . . . . 58
Guía VCR Plus+ para ajuste de canales . . . . . . . . . . . . . 59
Instalación para ajustar su televisor . . . . . . . . . . . . . . . . . 59
Grabación de programas de televisión . . . . . . . . . . . . . . . 60
Introducción de discos . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Modos de grabación y tiempo de grabación
aproximado en horas . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Visualización del televisor durante la grabación. . . . . . . . 61
Reproducción durante la grabación . . . . . . . . . . . . . . . . . 61
Reproducción de discos . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cuando aparece una pantalla de menús en el televisor. . 63
Memoria de posición . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Utilización del Navegador directo . . . . . . . . . . . . . . . . . . 63
Para borrar un programa que se está reproduciendo . . . 63
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contraportada
Timer recording
Timer recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specify a time to stop recording . . . . . . . . . . . . . . . . . . . . . . . 24
Using VCR Plus+ codes to make timer recordings. . . . . . . . . 24
Manually programming timer recordings . . . . . . . . . . . . . . . . 25
Check programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Change or delete the program . . . . . . . . . . . . . . . . . . . . . . . . 26
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
1 Remote control
1 AC power supply cord
1 75 ≠ coaxial cable
2 Batteries
for remote control
1 Audio/Video cable
[Note]
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
4
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1 Antenna and television connections
Preparation
To enjoy sound through other audio equipment (
➜page 42)
≥Refer to the television’s operating instructions.
≥Turn the television off and disconnect its AC power supply cord.
To enjoy progressive video
Connect to the component video(480P) input terminals on a televi-
sion compatible with this unit’s copy guard system. (Video will not
be displayed correctly if connected to an incompatible television.)
Television
To the antenna
Cable TV
AUDIO
IN
VIDEO
IN
VHF/UHF
RF IN
R
L
Outdoor antenna
Indoor antenna
Red White Yellow
AC power supply cord (included)
or
Connect last.
Also connect the AC
power supply cords for
the other equipment.
If the connector
doesn’t match
➜page 44
Audio/Video cable
(included)
Antenna cable
(usually discon-
nected from the
television).
75 ≠ coaxial cable
(included) ➜below
To household AC outlet
(AC 120 V, 60 Hz)
Red White Yellow
Cooling fan
This unit
RF IN
R-AUDIO-L
R-AUDIO-L
VIDEO S-VIDEO
(L1)
Y
P
B
PR
OPTICAL
RF OUT
COMPONENT
VIDEO OUT
(480P/480I)
VHF/UHF
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(L3)
VIDEO S-VIDEO
R-AUDIO-L
VIDEO S-VIDEO
Television
COMPONENT VIDEO OUT terminal
These terminals can be used for either
interlace or progressive output and
provide a purer picture than the S-VIDEO
OUT terminal.
Connection using these terminals outputs
the color difference signals (PB/PR) and
luminance signal (Y) separately in order to
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than
the VIDEO OUT terminal by separating the chrominance (C)
and luminance (Y) signals. (Actual results depend on the tele-
COMPONENT
VIDEO IN
Y
PB
PR
vision.)
Television
S VIDEO
IN
S video cable
(not included)
achieve high fidelity in reproducing colors
.
≥The description of the component video
input terminals depends on the televi-
sion or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y,
Y/CB/CR). Connect to terminals of the
same color.
R-AUDIO-L
VIDEO
S-VIDEO
Video cable
(not included)
When making this connection, ensure you connect the audio
cables to the corresponding audio input terminals on the tele-
vision.
≥After making this connect, change the
black level for a better picture
75 ≠ coaxial cable
Y
P
B
PR
≥The signal from the antenna passes through this unit and along
the 75 ≠ coaxial cable to the television even when this unit is
turned off. You don’t have to connect the antenna to the televi-
sion.
(➜page 47, Video–Black Level Control).
When making this connection, ensure you
connect the audio cables to the
corresponding audio input terminals on
the television.
OPTICAL
COMPONENT
VIDEO OUT
(480P/480I)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
≥The picture and sound signal from this unit does not go through
the 75 ≠ coaxial cable to the television. Make sure you connect
one of the following terminals on this unit to the television: the
AUDIO/VIDEO terminal, the S-VIDEO OUT terminal or the COM-
PONENT VIDEO OUT terminal. If the television has none of
these terminals, consult your local dealer.
Do not connect the unit through a video
cassette recorder
Video signals fed through video cassette recorders will
be affected by copyright protection systems and the pic-
ture will not be shown correctly on the television.
Conserving power
This unit consumes a small amount of power, even when it is
turned off (approx. 3.2 W). To save power when the unit is not to
be used for a long time, unplug it from the household AC outlet.
5
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 The remote control
STEP 3 Plug-in Auto Tuning
Batteries
R6/LR6, AA, UM-3
-
+
-
+
Numbered
buttons
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
3, 4, 2, 1
ENTER
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
[Note]
If you cannot operate the unit or television using the remote control
after changing the batteries, please re-enter the codes
(television➜page 10, main unit ➜page 45).
POWER, Í/I
V,WCH
Use
Remote control signal sensor
20x
After plugging the unit into your household AC outlet and pressing
[Í, DVD POWER] to turn the unit on for the first time, the unit
assists you to set the menu language, and automatically tunes in
all the channels it can receive and sets the clock.
20x
30x
30x
The unit automatically determines the type of transmission (VHF/
UHF or cable) and puts them into channels as follows.
7 m (23 feet) directly in
front of the unit
Band
Channel
VHF
UHF
2s13
14s69
2s13
TV Mode
(VHF/UHF)
VHF
CATV LOW BAND
95s99
14s36
37s65
CATV MID/SUPER BAND
CATV HYPER BAND
CATV Mode
(Cable)
66s94
100s125
ULTRA BAND
SPECIAL CATV CHANNEL
1
6
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
2 Press [3, 4] to select “Channel” and
≥Confirm that the antenna is connected correctly.
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
press [1].
SETUP
Antenna System
CATV
1 Press [Í, DVD POWER] to turn the
Auto Channel Setting
unit on.
Channel Caption
Preset Channel Caption
Channel
Set Up
Select Language
Seleccione la Lengua
Sélection de Langue
Manual Channel Caption
English
Español
Français
3 Press [3, 4] to select “Antenna Sys-
tem” and press [ENTER].
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Antenna System
SETUP
TV
CATV
Channel
Set Up
2
Press [
language and press [ENTER].
e.g., when you select
3
,
4] to select the menu
4 Press [3, 4] to select “TV” or
Auto Channel/Clock Setting
English
“CATV” and press [ENTER].
The screen shown in step 2 reappears.
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then. . .
5 Press [3, 4] to select “Auto Channel
Please push the ENTER key.
Setting” and press [ENTER].
Auto Channel Setting
ENTER
SETUP
RETURN
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
3 Press [ENTER].
Channel
Set Up
Disc
Video
Audio
Plug-in Auto Tuning starts and the unit puts the stations it
can receive into channels.
Please push the ENTER key.
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished. If the clock is an hour slower or
faster than the actual time, go to “Time Zone Adjust” to cor-
rect it (➜page 49).
If you have not yet set clock, the “Auto Channel/Clock
Setting” screen appears.
4
When the display shows the correct time
Press [ENTER] to complete Plug-in
Auto Tuning.
6 Press [ENTER].
Auto setting starts. This takes a few minutes. (To stop auto
channel setting, press [RETURN].) When finished, the Com-
plete screen or time display is shown. Press [ENTER].
To return to the previous screen
Press [RETURN].
If the unit couldn’t set the clock automatically
Press [ENTER] to show the “Manual Clock Setting” screen. Set the
time manually (➜page 49).
When you are finished
Press [SETUP].
To start Plug-in Auto Tuning again (after reloca-
tion, for example)
Adding and deleting channels
Antenna system, channel caption, and VCR Plusr guide
channel settings all revert to the default values when you
perform the procedure below. Timer recording settings are
also cleared.
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
While this unit is receiving the antenna signal (but not during
recording):
When the unit is on and stopped
1 Press and hold [X, CH] and [W, CH] on the main unit for
about five seconds.
The unit turns off.
2 Press [Í, DVD POWER] to turn the unit on.
Follow the above steps 2–4.
1 Press the numbered buttons to select
a channel.
e.g., “5”:
[0] ➜ [5]
Unit's display
“15”: [1] ➜ [5]
“115”: [100] ➜ [1] ➜ [5]
If Plug-in Auto Tuning fails
≥You can also use [W, X, CH]
when you are going to delete a channel.
1 Press [SETUP] to show the menus.
SETUP
Antenna System
CATV
2 Press [ADD/DLT].
Auto Channel Setting
The channel is deleted if it was set or added if it was not set.
Channel Caption
Preset Channel Caption
Channel
Set Up
Disc
e.g.,
Manual Channel Caption
CHANNEL 15 DELETED
VCR PlusiCH Setting
Video
Audio
Display
TV Screen
TAB
SELECT
RETURN
7
Repeat steps 1 and 2 as necessary.
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4 VCR Plusi guide channel settings
3 Press [3, 4] to select “VCR Plusr
CH Setting” and press [ENTER].
e.g., when the current antenna system is CATV.
POWER
DVD
TV
DVD
TV
Í
Í
VCR PlusiCH Setting
SETUP
REC
VCR Plus+ TV/VIDEO REC MODE
Guide Channel CATV Channel
---
125
Channel
Set Up
Disc
Video
Audio
1
4
7
2
3
6
CH
5
8
0
---
1
VOLUME
9
CANCEL
---
---
2
3
SELECT
ENTER
100
SLOW/SEARCH
CANCEL
Display
TV Screen
SKIP
RETURN
U
DIRECT NAVIGATOR
PLAY LIST
4 Press [3, 4] to select the guide
channel you want to set and press
[1].
MENU
TOP
MENU
3, 4, 2, 1
ENTER
ENTER
When selecting the guide channel, press and hold [3, 4]
RETURN
FUNCTIONS
RETURN
to scroll the screen up and down.
PROG/CHECK ADD/DLT
CM SKIP TIME SLIP
VCR PlusiCH Setting
SETUP
OPEN/CLOSE STATUS
FRAME
Guide Channel CATV Channel
SETUP
ERASE
AUDIO
DISPLAY
INPUT SELECT
---
---
4
5
Channel
Set Up
Disc
SETUP
F
Rec
POSITION MEMORY MARKER
---
6
Video
---
---
7
8
Audio
Display
TV Screen
SELECT
Set these guide channels so you can use VCR Plusi codes for
timer recording. Before starting the settings, prepare a chart show-
ing the channels, station names, and guide channels.
ENTER
RETURN
e.g.,
5 Press [3, 4] to select the channel
corresponding to the guide channel
and press [2].
Station
name
Guide
channel
Channel
number
Channel setting
(in step 5)
CBS
HBO
04
33
04
15
Unnecessary
Enter channel 15 next
to Guide Channel 33.
VCR PlusiCH Setting
SETUP
Guide Channel CATV Channel
Enter channel 20 next
to Guide Channel 38.
---
---
4
5
Nickelodeon
38
20
Channel
Set Up
Disc
12
6
Look up the guide channels
Write down all the stations you
Video
for the stations in magazines. can receive.
---
---
Audio
Display
TV Screen
7
8
SELECT
ENTER
RETURN
1 Press [SETUP] to show the menus.
To delete a number, press [CANCEL].
Repeat steps 4 and 5 as necessary.
SETUP
Antenna System
CATV
Auto Channel Setting
Channel Caption
Preset Channel Caption
Channel
Set Up
Disc
6 Press [ENTER].
The “Channel” screen reappears.
Manual Channel Caption
VCR PlusiCH Setting
Video
Audio
Display
TV Screen
TAB
SELECT
To return to the previous screen
Press [RETURN].
RETURN
2 Press [3, 4] to select “Channel” and
When you are finished
Press [SETUP].
press [1].
SETUP
Antenna System
CATV
Auto Channel Setting
Channel Caption
Preset Channel Caption
Channel
Set Up
Disc
VCR Plusi and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plusi system is manufac-
tured under license from Gemstar Development Corporation.
Manual Channel Caption
VCR PlusiCH Setting
Video
Audio
SELECT
ENTER
TAB
Display
TV Screen
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
RETURN
8
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Channel Caption
Other channel settings
3
Press [3, 4] to select “Manual
Channel Caption” and press [ENTER].
1 Press [SETUP] to show the menus.
2 Press [3, 4] to select “Channel” and
Manual Caption
SETUP
press [1].
Caption
Channel Number
125
SETUP
----
Antenna System
CATV
Channel
Set Up
Disc
Auto Channel Setting
- - - -
Channel Caption
Preset Channel Caption
1
Proceedwith
the steps
described
below.
Channel
Set Up
Disc
Video
Audio
Video
2
3
Manual Channel Caption
----
----
Audio
Display
TV Screen
SELECT
ENTER
VCR PlusiCH Setting
RETURN
SELECT
ENTER
TAB
Display
TV Screen
RETURN
4 Press [3, 4] to select the channel
and then press [1].
Preset Channel Caption
≥Channels are not displayed if they do not contain a station
or if preset captions have been added.
3 Press [3, 4] to select “Preset Chan-
5
Press [
character and then press [1].
≥You can choose from the following characters:
A–Z, 0–9, -, &, !, /, (space)
≥To delete the caption, press [CANCEL].
≥Repeat step 5 to enter the other characters.
3
,
4] to select the first
nel Caption” and press [ENTER].
Preset Caption
SETUP
Caption
GLOB
Channel Number
---
Channel
Set Up
Disc
Manual Caption
SETUP
---
ABC
Video
Audio
Display
TV Screen
Caption
----
Channel Number
---
---
PBS
CBS
SELECT
ENTER
6
8
Channel
Set Up
Disc
----
RETURN
AAAA
10
Video
Audio
Display
TV Screen
4 Press [3, 4] to select the caption
12
23
----
----
SELECT
ENTER
and then press [1].
RETURN
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
≥The screen scrolls a page at a time if you press and hold
[3, 4].
6 Press [2, 1] to return to the Channel
Number column when you are
finished.
Repeat steps 4, 5, and 6 as necessary.
5 Press [3, 4] to select the channel
corresponding to the caption and
then press [2].
7 Press [ENTER].
The “Channel” screen reappears.
≥Channels are not displayed if they do not contain a station
or if captions have been added manually.
≥To delete the channel number, press [CANCEL].
≥Repeat steps 4 and 5 as necessary.
6 Press [ENTER].
The “Channel” screen reappears.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
9
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5 Set up to match your television
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
∫ Regarding Progressive Television Picture
Numbered
buttons
Progressive image aspect (height to width ratio) is set at a stan-
dard 16:9. DVD-Video which has been set at 16:9 will be displayed
correctly. However, 4:3 video material will be stretched to the right
and left when displayed.
≥To view the picture at the right aspect
– For televisions that allow the aspect of progressive images to
be adjusted, use the function provided on the television and
adjust as necessary.
– For televisions which do not allow the aspect of progressive
images to be adjusted, please set “Progressive” to “OFF” (➜
page 38).
3, 4, 2, 1
ENTER
[Note]
≥If the unit is connected to the TV through VIDEO OUT or S-VIDEO
OUT, output will be interlace only (even if you select progressive
output).
≥When progressive output is on, closed captions can not be dis-
played.
Television operation
Change the settings if your television is:
≥Widescreen (16:9 aspect ratio)
You can control televisions by entering the remote control code.
≥Progressive
– Read your television’s operating instructions for details.
Press and hold [Í, POWER TV] and enter the
two-digit code with the numbered buttons.
e.g., 01: press [0] ➜ [1].
1 Press [SETUP] to show the menus.
SETUP
Antenna System
CATV
Auto Channel Setting
Code No. and Manufacturer
Channel Caption
Preset Channel Caption
Channel
Set Up
Disc
01
02
11
12
JVC
Manual Channel Caption
Panasonic/National QUASAR
HITACHI
VCR PlusiCH Setting
Video
MAGNAVOX SYLVANIA PHIL-
IPS (RC-5)
Audio
Display
TV Screen
03
13
MITSUBISHI
SAMSUNG
TAB
SELECT
RETURN
04
05
06
07
08
09
10
ZENITH
14
15
16
17
18
19
THOMSON RCA GE
2 Press [3, 4] to select “TV Screen”
GOLDSTAR/LG
and press [1].
SHARP
SETUP
SONY
4:3 (480I)
TV Type
SAMSUNG
–
TV mode(4:3)
TOSHIBA
SANYO FISHER
4:3 TV Settings for DVD-Video Pan&Scan
4:3 TV Settings for DVD-RAM Letterbox
Channel
Set Up
Disc
≥Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
Video
Audio
TAB
SELECT
ENTER
Display
TV Screen
[Note]
RETURN
If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote con-
trol is not compatible with your television.
3 Press [3, 4] to select “TV Type” and
press [ENTER].
∫ Operation
TVType
SETUP
Point the remote control at the television.
Aspect 4:3 & 480I
Aspect 4:3 & 480P
Aspect 16:9 & 480I
Aspect 16:9 & 480P
Operation
Button
Channel
Set Up
Disc
On and off
[Í, POWER TV]
Video input mode
[TV/VIDEO]
Video
(Switch [DVD, TV] to “TV”.)
[W, X, CH] or
Numbered buttons
4 Press [3, 4] to select the item and
Channels
Volume
press [ENTER].
≥If you select a progressive output (480P) item, select Video
in the on-screen menu and set “Transfer” to suit the material
(➜page 38).
e.g., Channel “5”: [0] ➜ [5]
[r, s, VOLUME]
10
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc information
Discs you can use for recording and
play
Play-only discs
DVD-Video
Video CD
Audio CD§
§ Including discs recorded with MP3.
DVD-RAM
DVD-R
4.7 GB/9.4 GB, 12 cm (5z)
2.8 GB, 8 cm (3z)
4.7 GB 12 cm (5z)
1.4 GB, 8 cm (3z)
for General Ver. 2.0
≥The producer of the material can control how DVD-Video and
Video CDs are played. This means that you may not be able to
control play of a disc with some operations described in these
operating instructions. Read the disc’s instructions carefully.
≥This unit can play CD-R/CD-RW (audio recording disc) recorded
with CD-DA (digital audio), video CD (video CD format 2.0 or
above) or MP3. Finalize§1 the disc after recording.
≥Do not allow the disc to become dirty or scratched. Fingerprints,
dirt, dust, scratches or deposits of cigarette smoke on the record-
ing surface may make it impossible to use the disc for recording.
≥Discs with programs recorded in PAL already cannot be
recorded on using this unit.
It may not be able to play some CD-R or CD-RW due to the condi-
tion of the recording.
§1 A process that allows play on compatible equipment.
≥This unit cannot record onto CD-R or CD-RW.
DVD-Video
DVD-RAM
≥Audio format
≥DVD-RAM recorded on this unit may not be compatible with
other DVD players. Consult
Dolby Digital (➜page 47)
the manual for the player to determine compatibility with
these DVD-RAM discs.
≥This unit is compatible with both non-cartridge and cartridge
DVD-RAM, but the write-protect tabs on cartridge-type discs give
better protection to your recordings.
This unit can play Dolby Digital in stereo (2
channels). Connect an amplifier with a built-in
Dolby Digital decoder to enjoy surround
sound.
DTS Digital Surround (➜page 47)
Connect this unit to equipment that has a
DTS decoder to enjoy DVDs with this mark.
≥Picture aspect ratios, regular 4:3 or widescreen 16:9, are
recorded as they are received.
DVD-R
Discs you can use
≥In order to play a DVD-R recorded using this unit on another
playback source, the disc must first be finalized (➜page 34).
≥Once a DVD-R is finalized, it becomes DVD-Video.
≥You can record onto the available space on the disc and perform
editing functions, such as giving titles to discs and programs and
erasing programs before finalizing.
≥When programming is erased from a DVD-R, that space does not
become available. Once an area on a DVD-R is recorded on, that
area is no longer available for recording, whether the recording is
erased or not.
The features you can use with the different types of discs are
indicated as follows.
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
|
|
|
|
|
|
DVD-RAM DVD-R
DVD-Video Video CD Audio CD MP3 discs
[DVD-R] indicates DVD-R that have not yet been finalized
(➜page 34). DVD-R that have been finalized can use the same fea-
tures as DVD-Video. (Refer to features indicated [DVD-V].)
≥It takes about 30 seconds for the unit to complete recording man-
agement information after recording finishes.
≥This unit optimizes the DVD-R for each recording. Optimizing is
carried out when you start recording after inserting the disc or
turning on the unit. Recording onto the disc may become impos-
sible if optimizing is carried out too many times.
≥Play may be impossible in some cases due the condition of the
recording.
Discs that cannot be played
≥DVD-Video with a region number other than “1” or “ALL”
≥12-cm (5z), 2.6- and 5.2-GB DVD-RAM
≥DVD-RAM not recorded following the Video Recording Standard
≥3.95- and 4.7-GB DVD-R for Authoring
≥The video is recorded in a 4:3 aspect irrespective of the video
signal input.
≥Unfinalized DVD-R recorded on other equipment
≥PAL discs
≥+RW
≥Photo CD
≥MV-Disc
≥DVD-ROM
≥CD-ROM
≥CVD
≥DVD-RW
≥CDV
≥SVCD
≥DVD-Audio
≥CD-G
≥SACD
≥PD
≥Divx Video Disc, etc.
Protection
[RAM]
You can protect the contents of your discs in the following ways.
≥Cartridge-protect:
With the write-protect tab in the protect posi-
tion, you cannot record to, edit, or erase
from the disc. (Type 1, 2, and 4 cartridge
PROTECT
discs)
≥Program-protect (➜page 32)
≥Disc-protect (➜page 34)
11
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
Remote control
1 POWER button (Í, DVD (POWER)) . . . . . . . . . . . . . . . . . . 7, 14
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
2 VCR Plusr button (VCR Plusr) . . . . . . . . . . . . . . . . . . . . . . 24
3 Television input mode selector (TV/VIDEO). . . . . . . . . . . . . 10
4 Numbered buttons (1–9, 0, 100)
5 Cancel button (CANCEL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Skip buttons (:, 9 SKIP) . . . . . . . . . . . . . . . . . . . . . . . 18
7 Stop button (∫ STOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8 Pause button (; PAUSE) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9 Top menu and Direct Navigator button
D
1
2
E
Í
Í
F
G
3
(TOP MENU, DIRECT NAVIGATOR). . . . . . . . . . . . . . . . . 17, 21
: Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . 7, 15
; Functions button (FUNCTIONS) . . . . . . . . . . . . . . . . . . . . . . 23
< Manual channel adding and deleting button
H
4
(ADD/DLT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
= Manual programming and check button
I
J
5
6
(PROG/CHECK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
> On-screen display button (STATUS). . . . . . . . . . . . . . . . . . . 39
? Disc tray open/close button (< OPEN/CLOSE) . . . . . . . . . 14
@ Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
A Setup button (SETUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
B Program/play list erase button (ERASE) . . . . . . . . . . . . 17, 29
C Flexible Recording button (F Rec) . . . . . . . . . . . . . . . . . . . . 15
D TV power on/off button (Í, (POWER) TV) . . . . . . . . . . . . . . 10
E DVD/TV switch (DVD, TV) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
F Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G Recording mode button (REC MODE) . . . . . . . . . . . . . . . . . 14
H Channel buttons for recorder and TV (W, X, CH) . . . . . 10, 14
I TV volume buttons (r, s, VOLUME) . . . . . . . . . . . . . . . . . . 10
J Slow/search buttons (6, 5 SLOW/SEARCH) . . . . . . . . 18
K Play/speed play button (1 PLAY). . . . . . . . . . . . . . . . . . 16, 19
L Menu and Play list button (MENU, PLAY LIST) . . . . . . . 17, 28
M Return button (RETURN). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
N One-minute skip button (CM SKIP) . . . . . . . . . . . . . . . . . . . 18
O Time slip button (TIME SLIP). . . . . . . . . . . . . . . . . . . . . . 19, 22
P Frame advance and frame reverse buttons
7
9
K
L
8
:
;
=
M
<
N
O
P
>
@
?
A
B
(2;, ;1 FRAME). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Q Input select button (INPUT SELECT) . . . . . . . . . . . . . . . . . . 15
R On-screen menu button (DISPLAY) . . . . . . . . . . . . . . . . . . . 36
S Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
T Position memory button (POSITION MEMORY) . . . . . . . . . 17
Q
T
R
S
C
How to open the remote control
Hold both sides of the remote control’s cover to open it. (You can
also open it by pressing on the center of it and sliding it down.)
12
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Main unit
U
W
V
[
Z
Y
X
U Power button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 14
V Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
W Channel buttons for recorder (CHANNEL). . . . . . . . . . . . . . 14
X L2 input terminals (L2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Y Display
Z Time slip indicator (TIME SLIP). . . . . . . . . . . . . . . . . . . . . . .22
[ Skip/Slow/Search buttons (82/6,5/9) . . . . . . .18, 19
The unit’s display
A
B
C
D
E
F
G
Center circle (e.g., DVD-RAM)
Rotating (REC) :Recording
Stopped (REC) :Recording paused
Rotating (REC, PLAY) :
Rotating (PLAY) : Playing
Stopped (PLAY) : Play paused
“PLAY” flashes :
Chasing play or simultaneous
recording and play is in progress
The resume function (
➜page 16,
To stop play) is working
A Timer recording display
On: When timer recording is on standby (➜page 24)
D Recording mode (➜page 15)
E DVD indicator
Flashes: When the unit couldn’t go to timer recording standby
B Disc type
Flashes: When you press [Í, DVD POWER] to turn the unit
off until it actually turns off
C The display mode of the main display section
F Channel
GRP:
TITLE:
PL:
CHAP:
PG:
Group number
Title number
Play list number
Chapter number
Program number
G Main display section
Recording and play counter, and other miscellaneous messages
TRACK: Track number
13
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording television programs
[RAM] [DVD-R]
2
Disc tray
1 Press [Í, DVD POWER] to turn the
1
5
3
unit on.
2 Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜ next page).
≥Press the button again to close the tray.
≥It is not possible to record continuously from one side of a
double sided disc to the other. You will need to eject the
disc and turn it over.
4
3 Ensure [DVD, TV] is switched to
“DVD” and press [W, X, CH] to select
the channel.
e.g., when you
select channel 4
4 Press [REC MODE] to select the
Numbered
buttons
recording mode (➜ next page).
e.g., when you
select “XP”
5 Press [¥, REC] to start recording.
Program information (e.g., time and date) is registered in the
program list (➜page 17).
[DVD-R]
To play DVD-R on compatible equipment, finalize it (➜page 34).
For your reference
To stop recording
≥You can record up to 99 programs on one disc.
≥This unit is compatible with the Content Protection for Record-
able Media (CPRM ➜page 50) system so you can record broad-
casts that allow one copy, such as some CATV broadcasts, onto
4.7 GB/9.4 GB DVD-RAM (these are CPRM compatible). It is not
possible to record onto DVD-R or 2.8 GB DVD-RAM.
≥Recording will take place on open space on disc. Data will not be
overwritten.
Press [∫].
To pause recording
Press [;]. Press again to restart recording.
Auto power-off
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(➜page 46, Set Up—Off Timer).
[Note]
≥You cannot change the channel or recording mode during record-
ing.
≥Release protection (cartridge ➜page 11, disc ➜page 34) when
you record. [RAM]
≥When using a DVD-RAM for the first time with this unit, format it to
ensure accurate recording (➜ “Format” , page 34).
≥There are limitations when recording to DVD-R (➜ page 11).
≥When recording MTS sound onto DVD-R, either the main channel
or the sub channel can be recorded, not both. Select at “Select
MTS” (➜ page 47).
Should the AC power supply cord come loose by
accident or for any other reason the power supply is
cut off while recording or editing is taking place, the
contents of the disc may be lost.
14
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting discs
[RAM] [DVD-R]
Recording from a video cassette
recorder
You can insert a cartridge or non-cartridge disc.
[RAM] [DVD-R]
Preparation
Non-cartridge disc
Connect a video cassette recorder to this unit’s input terminals
(➜page 43).
Insert label-up.
Insert inside the
tray’s guides.
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
Cartridge disc
have connected.
Select L1, L2, or L3.
Insert label-up with the arrow facing in.
≥
You can also select the input channel by pressing [
W
,
X, CH].
2 Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
[Note]
≥Load double-sided discs so the label for the side you want to
record/play is facing up.
≥When using 8 cm (3″) DVD-RAM, remove the disc from the car-
tridge and insert it, making sure you align it with the groove.
3 Start play on the other equipment.
4 Press [¥, REC] at the point you want
to start recording.
Recording modes and approximate
recording times in hours
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
Disc
DVD-RAM
To stop recording
DVD-R
(4.7 GB)
Press [∫].
Single-sided Double-sided
Mode
(4.7 GB)
(9.4 GB)
[Note]
≥When recording using L1, L2 or L3 terminals, only the sound
received at the time of recording will be recorded.
≥If flexible recording (➜ below) is used instead of steps 2 and 4,
settings can be made so that recording continues to the end of the
video.
XP (High quality)
SP (Normal)
1
2
4
6
2
4
1
2
4
6
LP (Long play)
EP (Extra long play)
8
12
FR (Flexible Recording Mode)
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
The unit automatically selects a recording rate between XP and EP
that will enable the recordings to fit in the available recording time
on the disc with the best possible recording quality.
You may use FR Mode in either Flexible Recording (➜ right) or in
timer recording (➜page 25).
Recording the best quality pictures in
the remaining time—Flexible Recording
Watching the television while recording
[RAM] [DVD-R]
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
[RAM] [DVD-R]
Pictures being recorded are unaffected.
Switch [DVD, TV] to “TV”.
1 Press [TV/VIDEO] to change the television’s input mode to
1
While stopped
FLEXIBLE REC
Record on FR mode
“TV”.
2 Press [W, X, CH] to change channels.
≥You can also select the channel with the numbered buttons.
Press [F Rec].
Maximum rec time
Set up rec time
1 Hour 23 Min.
1 Hour 23 Min.
e.g.,
“5”:
[0] ➜ [5]
2 Press [2, 1] to
select “Hour”
and “Min.” and
Start
Cancel
“15”: [1] ➜ [5]
“115”: [100] ➜ [1] ➜ [5]
SELECT
ENTER
RETURN
press [3, 4] to set the recording time.
3 Press [3, 4, 2, 1] to select “Start”
and press [ENTER].
Recording starts.
[Note]
It may not be possible to record to the finish of the program if the
remaining time doesn’t allow.
For your reference
≥Press [STATUS] during recording to show the remaining time.
≥Recording time reduces if you repeatedly pause recording.
15
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
2
Disc tray
3
1
1 Press [Í, DVD POWER] to turn the
unit on.
2 Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜ page 15).
≥Press the button again to close the tray.
≥If cartridge protection is activated (➜page 11), play begins
automatically when you close the tray. [RAM]
:/22,11
/
9
ERASE
≥You cannot play continuously from one side of a double-
sided disc to the other. Eject the disc and turn it over.
3 Press [1] (PLAY).
The unit takes some time to read the disc
before play starts. (When a menu screen
appears on the television ➜ next page).
≥If the resume function (➜ below, to stop play) is not active,
playback will begin from the most recently recorded pro-
gram. To play from the beginning of a disc, select “PLAY
FROM TOP” in the FUNCTIONS window (➜page 23).
Numbered
buttons
To stop play
Press [∫].
[Note]
≥If a disc is loaded, the unit will come on and play will start when
you press [1] (PLAY).
≥When “PLAY” flashes on the display, resume func-
tion is active. Press [1] (PLAY) to start play from
where you stopped it.
To cancel, press [∫] until “PLAY” goes out. (The
position is also cleared when you turn the unit off
or open the disc tray.)
≥The screen saver may appear when you
stop play. Press [∫] again and you can
use this unit’s tuner to watch television.
≥When you play a disc with an audio-only track, the video from the
previous disc may continue to be shown on the television.
≥Actual sound levels for DVD-Video are lower compared to televi-
sion broadcast or playback of other discs. To avoid a sudden
increase in volume level when switching from DVD-Video, reduce
the volume setting before playing other sources or switching to
television broadcast.
To pause play
Press [;]. (Press again to restart play.)
Auto power-off
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(➜page 46, Set Up—Off Timer).
16
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
When a menu screen appears on the
television
Using the Direct Navigator
[RAM] [DVD-R]
A list of programs is created as you record them. You can use this
list to find programs to watch.
[VCD]
Switch [DVD, TV] to “DVD” and
Press the numbered buttons (0, 1j9) to select an item.
e.g., “5”: [0] ➜ [5]
1 Press [DIRECT NAVIGATOR].
The highlighted program plays in the background.
“15”: [1] ➜ [5]
DIRECT NAVIGATOR
[DVD-V]
Press [3, 4, 2, 1] to select an item and press
No CH
DATE
TIME
TITLE
EDIT
1
[ENTER].
3
01
02
03
4
6
13
6/20 WED 10
6/20 WED
6/20 WED
:
:
:
00 AM Dinosaur
00 PM
00 PM USJ
≥You may also be able to use the numbered buttons (0, 1j9) to
select an item.
1
Auto action
9
11
1
1
3
1
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[17] [5/ 17]: Shows the next menu.
SELECT
ENTER
TOTAL 3
No
~
0
9
RETURN
[
82] [82 /22 ]: Shows the previous menu.
2 Press [3, 4] to select the program
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
and press [ENTER].
≥You can also select programs with the numbered buttons.
e.g.,
“5”: [0]➜ [5]
“15”: [1] ➜ [5]
[Note]
Play of the images that were playing in the background
continues.
≥Discs continue to rotate while menus are displayed. Press [∫]
when you have finished viewing to preserve the unit’s motor and
your television screen.
≥If “ ” appears on the television, the operation is prohibited by
the unit or disc.
To stop play
Press [∫].
≥Functions available vary from disc to disc.
To clear the program list
Press [DIRECT NAVIGATOR].
Position Memory
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
You can start play from a memorized position even after turning the
unit off.
About the program list
Write-protected
Displayed when you have protected
the program.
(When the elapsed play time is displayed)
o
N
POS FE
Copy-protected
1
During play
3
Displayed when you have recorded
a program that has copy protection,
from CATV broadcasts, for example.
01
02
03
04
05
4
6/20
6/20
6/20
6/21
6/22
Press [POSITION MEMORY].
The message “Position Memorized” appears on the
television.
6
13
2
Unable to play
Displayed if you cannot play the program.
X
2
After switching the unit to standby and back on
3
¥
8
Press [1] (PLAY).
Play starts from the memorized position. (The position is
cleared.)
Currently recording
Displayed when the program is being
recorded.
TOTAL 5
N
0
~
[Note]
[DVD-R] [DVD-V] [VCD] [CD] [MP3]
≥The position is cleared when you open the disc tray.
[RAM]
To erase a program that is being played back
≥Positions remain memorized even after the disc tray is opened.
≥You cannot mark positions if the disc is write-protected.
Since the program and any play lists (➜page 28) created
from it are erased irretrievably by this procedure, you
should be certain you wish to erase before carrying it out.
For your reference
If you press [∫] before switching the unit to standby after pressing
[POSITION MEMORY] to memorize a position, play will resume
from the position you pressed [∫] when you press [1] (PLAY).
1 Press [ERASE].
A confirmation screen will be displayed.
2 Press [2] to select “Erase” and press
[ENTER].
≥On the main unit, press [82/6] and [ERASE].
[Note]
≥It is not possible to erase the program when you are carrying out
simultaneous rec and play (➜page 22). [RAM]
≥The amount of space remaining on the disc does not increase
even if you erase programs. [DVD-R]
≥If the confirmation screen disappears before you complete the
operation, start from the beginning again.
17
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Other methods of play
Slow-motion play
[RAM] [DVD-R] [DVD-V] [VCD]
While paused
Press [6] or [5].
Press and hold [82/6] or [5/9] on the main unit.
Numbered
buttons
[Note]
≥The speed increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥Backward ([6] [82/6]) does not work with Video CDs.
PLAY
Frame-by-frame viewing
[RAM] [DVD-R] [DVD-V] [VCD]
3, 4, 2, 1
While paused
ENTER
Press [2;] or [;1].
[Note]
≥Each press shows the next frame.
≥Press [1] (PLAY) to restart play.
≥Cursor buttons [2, 1] are also effective while paused for frame-
by-frame viewing.
≥Backward ([2;]) does not work with Video CDs.
Starting play from a selected program,
title, chapter, or track
Skipping
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
During play or while stopped
During play or while paused
Press the numbered buttons to select the
item.
Press [:] or [9].
≥Press [82/6] or [5/9] on the main unit.
e.g.,
“5”: [0] ➜ [5]
[MP3] “5” : [0] ➜[0] ➜[5]
“15”: [1] ➜ [5]
“15” : [0] ➜[1] ➜[5]
≥Each press increases the number of skips.
[Note]
[DVD-V] [VCD] [CD] [MP3]
≥This may not work with some discs.
≥This works only when stopped with some discs (the screen saver
is on the television).
Play position
Twice
Once
Twice
Once
Chapter/track
Chapter/track
Chapter/track
[:]
[9]
[:/6]
[5/9]
[RAM] [DVD-R]
Marker
Play position
Skipping a minute forward—CM Skip
Twice
Once Twice Three times
Once
[RAM] [DVD-R]
Program
Program
Program
During play
[:]
[9]
[5/9]
Press [CM SKIP].
Play restarts from approximately a minute later.
[:/6]
[Note]
For your reference
If the start of the next program is within one minute of the point you
skipped from, play restarts from the beginning of that program.
Pressing [82] [82/6] or [9] [5/9] while the playback
control feature on Video CDs (➜page 50) is working may take you
to a menu screen.
18
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting an amount of time to skip—
Time Slip
[RAM] [DVD-R]
1
During play
Press [TIME SLIP].
0 min
2
Within 5 seconds
Press [3, 4] to enter the time and
then press [ENTER].
e.g., Go back to 5 minutes
–5 min
Press to change in one-minute units. Press and hold to
change in 10-minute units.
Fast forward and rewind—SEARCH
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
During play
Press [6] or [5].
≥Press and hold [:/22]] or [11 9] on the main unit.
/
[Note]
≥The speed increases up to 5 steps.
≥Press [1] (PLAY) to restart play.
≥Audio will be heard during search. You can turn this audio off if
you want to (➜page 47, Audio—PLAY & Audio during Search).
19
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking places to play again—MARKER
Using on-screen menus to mark
positions
Displaying the marker icon
1
During play
Press [DISPLAY].
The on-screen menus appear. (e.g., DVD-RAM)
Disc
Play
Video
Audio
1
Î Digital 2/0ch
OFF
L R
Sound track
Subtitle
Audio channel
2 Press [3, 4] to select the “Play”
and press [1].
Disc
Repeat play
OFF
3, 4, 2, 1
Play
Video
Audio
1s10
Marker
††††††††††
ENTER
3 Press [3, 4] to select “Marker”
and press [1] to highlight the first
asterisk (¢).
[RAM] [DVD-R]
[DVD-V] [VCD] [CD] [MP3]
1s10
†††††
††††††††††
Marking positions
Press [2, 1] to select an asterisk (¢) and
press [ENTER].
One marker is added.
When marking positions 11 and above
You can mark positions by pressing [MARKER]. Also use on-
screen menus to mark, recall, and clear positions.
[RAM] [DVD-R]
1 Press [2, 1] to highlight “1–
[RAM] [DVD-R]
10”.
1 2
1s10
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
2 Press [3, 4] to select “11–20”.
You can select the next group of
10 when the current group is full.
3 Press [1].
[DVD-V] [VCD] [CD] [MP3]
Mark up to 5 positions. The markers clear when you open the disc
tray.
The first asterisk is highlighted.
4 Press [ENTER] to mark a position.
Playing from a marked position
Marking positions directly
During play
Press [2, 1] to select a marker number
and press [ENTER].
Play starts from the marked position.
Press [MARKER].
One marker is added.
Clearing markers
Press [2, 1] to select a marker number
and press [CANCEL].
An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
≥Subtitles around markers may fail to appear.
≥Markers are cleared when you finalize DVD-R (➜page 34).
≥Markers on DVD-RAM and DVD-R are ordered by time, so
marker numbers can change when you add and delete
them.
[Note]
≥You cannot use this feature if:
– the disc’s elapsed play time is not shown in the display.
– you are using a play list. [RAM]
– protection (cartridge ➜page 11, disc ➜page 34) is set
(you can still recall the markers to play a position).
20
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus to play MP3 discs
Using the tree screen to find a group
1
While stopped
Press [1] while a track is highlighted
to display the tree screen.
Numbered
buttons
Selected group no. /Total group no.
≥
If the group has no track, “– –” is displayed
as group number.
MENU
TREE
G
T
8
14
MP3 music
001 My favorite
001 Brazilian pops
002 Chinese pops
003 Czech pops
004 Hungarian pops
005 Liner notes
006 Japanese pops
007 Mexican pops
008 Philippine pops
009 Swedish pops
001 Momoko
G
1/40
TOTAL
1/111
You cannot select
groups that
No.
0
~
9
contain no
SELECT
ENTER
3, 4, 2, 1
002 Standard number
001 Piano solo
002 Vocal
compatible files.
ENTER
RETURN
2 Press [3, 4, 2, 1] to select a group
and press [ENTER].
The file list for the group appears.
To return to the file list
Press [RETURN].
[Note]
≥Discs must conform to ISO9660 level 1 or 2 (except for
[MP3]
extended formats).
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as groups.
≥This unit is compatible with multi-session but if there are a lot
of sessions it takes more time for play to start. Keep the num-
ber of sessions to a minimum to avoid this.
If you play a MP3 track that includes still picture data, it will
take some time before the music itself starts playing and the
elapsed time will not be displayed during this time. Even after
the track starts, the correct play time will not be displayed.
≥This unit is not compatible with ID3 tags.
≥Compatible sampling rate: 16, 22.05, 24, 32, 44.1 and
48 kHz.
1 Press [TOP MENU].
Selected group number and name
≥
No
1
TOTAL
1
2
3
4
5
6
7
GROUP
My favorite
TRACK
001 Both Ends Freezing
002 Lady Starfish
003 Life on Jupiter
004 Metal Glue
005 Paint ItYellow
006 Pyjamamama
007 Shrimps from Mars
008 Starperson
MENU
G
T
G: Group no.
T: Track no. in the
group
TOTAL: Selected
track no./
:
1
1
TREE
TOTAL
1/111
No.
0
~
9
Total track
no. in all
groups
Compatible compression rate: between 32 kbps and 320 kbps
8
9
10
SELECT
ENTER
009 Velvet Cuppermine
010 Ziggy Starfish
RETURN
Prev.
Next
Naming folders and files
≥MP3 files must have the extension
“.MP3” or “.mp3”.
e.g.,
2 Press [3, 4] to select the track and
001 (folder=group)
001
press [ENTER].
≥
At the time of recording, give folder
and file names a 3-digit numeric
prefix in the order you want them to
play (this may not work at times).
001track.mp3 (file=track)
002track.mp3
003track.mp3
Play continues to the last track in the last group.
≥“ ‘ ” indicates the track currently playing.
≥You can also select tracks with numbered buttons.
e.g., “5”: [0] ➜ [0] ➜ [5]
002 group
001track.mp3
003 group
002track.mp3
003track.mp3
004track.mp3
“15”: [0] ➜ [1] ➜ [5]
001track.mp3
002track.mp3
003track.mp3
To show other pages
Press [3, 4, 2, 1] to select “Prev.” or “Next” and press [ENTER].
After listing all the tracks in one group, the list for the next group
appears.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
To exit the file list
Press [TOP MENU].
21
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing while you are recording
Simultaneous recording and play
[RAM]
You can play a program previously recorded.
1
During recording
Press [DIRECT NAVIGATOR].
Time slip indicator lights.
2 Press [3, 4] to select a program and
press [ENTER].
e.g.,
You want to watch the movie
you recorded yesterday (pro-
gram 1) while recording pro-
gram 2 (sports program).
Program 1 is played back
while program 2 (sport) is
being recorded.
1
∫
3, 4, 2, 1
ENTER
DIRECT NAVIGATOR
TITLE
No
01
02
CH
4
6
DATE
TIME
TITLE
EDIT
1
3
10
9
:
:
00 AM Dinosaur
00 PM
6/19 WED
6/20 THU
¥
1
Soccer
1
1
1
3
SELECT
ENTER
TOTAL 2
No
~
0
9
RETURN
[Note]
≥Sound is not output while fast-forwarding.
≥You cannot edit programs during simultaneous rec and play
(➜page 32).
Playing from the beginning of the
program you are recording—Chasing
Play
Reviewing the recorded images while
recording—Time Slip
[RAM]
[RAM]
You can play the program being recorded to check that it is being
recorded correctly. You can also check parts that were recorded
previously.
Press [1] (PLAY).
Play starts from the beginning of the program being recorded.
(Time slip indicator lights.)
1 Press [TIME SLIP].
e.g.,
Time slip indicator lights.
The same sports program is
played back from the begin-
ning. (Recording continues.)
You are recording a sports
program and you want to
watch it from the beginning.
PLAY
0 min
Play images
Play starts from 30
seconds previous. The
current recording images
appear as a picture-in-pic
ture and you will hear the
playback audio.
≥You can select another
program if you press
[DIRECT NAVIGATOR].
REC
Current
recording
2 Press [3, 4] to enter the time and
press [ENTER].
[Note]
≥Press [3, 4] to alter in
Sound is not output while fast-forwarding.
PLAY
one-minute units. Press
and hold [3, 4] to alter
in 10-minute units.
REC
To stop play and recording
1 Press [∫]. (Play stops.)
Press [TIME SLIP] to show the play images in full. Press again to
show the play and recording images.
Wait 2 seconds.
2 Press [∫]. (Recording stops.)
≥To stop timer recording, press [∫], then [ENTER] within 5
seconds.
22
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing audio
Using the FUNCTIONS window
3, 4, 2, 1
ENTER
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
By using the FUNCTIONS window you may access the main
functions quickly and easily.
[RAM] [DVD-V] [VCD]
You can change the audio being received or played.
Press [AUDIO].
1
While stopped
How the type changes depends on when you press the button.
∫ While receiving MTS audio (Multi-channel
Press [FUNCTIONS].
e.g., DVD-RAM
DVD-RAM
DISC PROTECTION OFF
CARTRIDGE PROTECT OFF
Television Sound Stereo)
Stereo: Main audio (stereo)
FUNCTIONS
N
S
v
N
S
SAP: Secondary audio program (SAP)
DISC SETTING DIRECT NAVIGATOR CREATE PLAY LIST
v
Date
Time
CH
Mono: Main audio (monaural)
TIMER RECORDING
RESUME PLAY
PLAY LIST
SELECT
v
ENTER
(Return to Stereo)
RETURN
SETUP PLAY FROM TOP FLEXIBLE REC
≥If the broadcast is “Mono i SAP”, audio will be monaural even if
you select Stereo mode.
≥Select “Mono” if reception is poor during a stereo broadcast.
2 Press [3, 4, 2, 1] to select an item.
Refer to the relevant pages for details.
No disc
e.g., “Stereo” is selected
Icon
Refer to
CH 12
Stereo
DISC SETTING
➜page 34, Disc setting
“((” appears when the unit is receiving
the type of audio you selected.
((
TIMER
RECORDING
➜page 24, Timer recording
SETUP
➜page 46, Changing the unit’s settings
[Note]
≥If you change the sound setting while recording, the recorded
DIRECT
➜page 17, Using the Direct Navigator
sound will also change.
NAVIGATOR
➜page 32, Editing programs
≥You cannot change the sound when a DVD-R is in the disc tray.
≥If recorded in SAP mode, main audio is also recorded.
≥When you record MTS audio, select either “Main” or “SAP” before
recording (➜page 47, Audio—Select MTS). [DVD-R]
RESUME PLAY
PLAY
➜page 16, Playing discs
[RAM] [DVD-R]
Play will begin with the oldest program
on the disc (Program 1).
∫ While playing DVD-RAM or
DVD-RAM
[DVD-V]
PLAY
Video CD
LR>L>R
^---------------}
PLAY FROM TOP
FLEXIBLE REC
Play will avoid playing the introductory
parts and begin playing the contents
immediately. (The performance of this
function varies from disc to disc.)
e.g., DVD-RAM
“L R” is selected
L R
≥If you have recorded an SAP broadcast by pressing [AUDIO] to
[RAM]
➜page 15, Recording the best quality
pictures in the remaining time –Flexible
Recording
select SAP
MAIN()SAP
For your reference
You can change the audio for the full images being played with
CREATE PLAY
LIST
➜page 28, Creating play lists
[RAM]
simultaneous rec and play and Time Slip.
∫ While playing DVD-Video
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack language
➜page 29, Playing play lists
➜page 30, Editing play lists
PLAY LIST
.
TOP MENU
MENU
➜page 17, When a menu screen
appears on the television
1 ENG
Î Digital 3/2.1ch
Sound track
Functions displayed depend on the type of disc.
≥Some items will be grayed out and cannot be selected if:
–the disc is write protected/the disc is not formatted/there is
nothing recorded on the disc.
e.g., English is the selected language.
[Note]
[RAM]
3 Press [ENTER].
You may be unable to change the audio when you have connected
the unit to an AV receiver through the DIGITAL AUDIO OUT termi-
nal and “Dolby Digital” is set to “Bitstream”. If this occurs:
– Change “Dolby Digital” to “PCM” (➜page 47), or
– Connect also with an audio cable (➜page 42, [B]) and change
the input on the receiver.
Your selection is entered and the FUNCTIONS menu disap-
pears. If the operation requires further selections, another
screen appears.
To clear the FUNCTIONS menu
Press [FUNCTIONS].
23
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
Preparation
≥Ensure the clock (and guide channels for VCR Plusr recording,
➜page 8) are set correctly.
≥Release protection (cartridge ➜page 11, disc ➜page 34) before
proceeding. [RAM]
Using VCR Plusr codes to make timer
recordings
Entering VCR Plusi codes is an easy way of programming the unit
for recording. You can find these codes in TV Guides and maga-
zines. You can enter up to 16 programs up to a month in advance.
Numbered
buttons
1 Press
VCR Plusi
Remaining Recording Time 1:58 SP
3/26TUE12:53 PM
[VCR Plusr].
Enter PLUS CODE Number by using 0–9 key.
3, 4, 2, 1
ENTER
No.
2 Press the numbered buttons to enter
the VCR Plusr code.
Press [2] to move
back to correct a
VCR Plusi
Remaining Recording Time 1:58 SP
3/26TUE12:53 PM
digit.
1 2 1
2
1 2
1 2
[RAM] [DVD-R]
Specify a time to stop recording
3 Press [ENTER].
This is a simple way of specifying a time to stop recording when
you are in a hurry or before you go to bed.
Confirm the program and make corrections if necessary
using [3, 4, 2, 1].
During recording
≥“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
≥To change the recording mode
Press [¥, REC] to select the recording time.
Each time you press the button:
e.g.,
Press [REC MODE].
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
≥To enter the title of the program
Press [2, 1] to select “Enter Title” and press [ENTER]
(➜page 27).
The current
TIMER
For your reference
≥Press [STATUS] to show the time remaining until recording
finishes.
≥This does not work during timer recordings or while using Flexible
Recording (➜ page 15).
≥Recording stops and the set time is cleared if you press [∫].
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Remaining Recording Time 1:58 SP
RECORDING
recording mode
(shown on the
unit’s display) is
automatically
selected.
3/26TUE12:53 PM
CHANNEL
DATE
ON
OFF
MODE
SP
3
39
4 / 1 MON 4:20 PM
5:10 PM
4
Enter Title
When you press [ENTER]
Displayed if the
TIMER
RECORDING
Remaining Recording Time 1:58 SP
recording can fit
in the remaining
space on the
disc.
3/26TUE12:53 PM
CHECK
MODE
SP Enable
No CHANNEL
01 39
DATE
4 / 1 MON 4:20 PM
ON
OFF
5:10 PM
New Timer Program
Repeat steps 1–3 to program other recordings.
4 Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING” is shown on the
television.
5 Press [Í, DVD POWER].
Ensure “ ” lights on the unit’s display.
24
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually programming timer recordings
You can enter up to 16 programs up to a month in advance.
Each daily or weekly program is counted as one program.
4 Press [ENTER] when you have
finished programming the timer.
TIMER
Remaining Recording Time 1:58 SP
RECORDING
3/26TUE12:55 PM
No CHANNEL
DATE
ON
OFF
2:00 PM
3:00 PM
MODE CHECK
SP Enable
SP Enable
01 64 ABC 3/ 26 TUE 1:00 PM
02 64 ABC 3/ 26 TUE 2:30 PM
New Timer Program
1 Press [PROG/CHECK].
Displayed if the
recording can fit
in the remain-
ing space on
the disc.
TIMER
Remaining Recording Time 1:58 SP
RECORDING
3/26TUE 12:55 PM
No CHANNEL
DATE
ON
OFF
2:00 PM
MODE CHECK
SP Enable
01 64 ABC 3/ 26 TUE 1:00 PM
A line that is
ready for
New Timer Program
programming
is highlighted.
≥Press [3, 4] to select “New Timer Program” and repeat
steps 2- 4 to program other recordings.
SELECT
ENTER
Press ENTER or VCR Plus+ to
store new program
CANCEL
5 Press [PROG/CHECK] or [RETURN].
RETURN
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING” is shown on the
television.
2 Press [ENTER].
TIMER
RECORDING
Remaining Recording Time
1:58 SP
6 Press [Í, DVD POWER].
3/26TUE 12:55 PM
Ensure “ ” lights on the unit’s display.
CHANNEL
DATE
----------
ON
OFF
MODE
--
3
--:-- --
----
--:-- --
4
Enter Title
To release the unit from recording standby
If you want to record something else before the program start
time, for example:
Please set Channel.
Press [Í, DVD POWER].
The unit turns on and “ ” goes out.
No.
SELECT
ENTER
0
9
--
RETURN
≥Be sure to press [Í, DVD POWER] to return the unit to
standby mode before the scheduled recording time. Timer
recording will work only if “ ” is displayed.
3 Press [1] to move through the items
and change the items with [3, 4].
To stop recording when recording has already
begun
Press [∫], then [ENTER] within 5 seconds.
≥The current settings are shown each time you press [1].
≥You may use the numbered buttons to enter the CHANNEL,
DATE, ON (start Time), and OFF (Finish Time).
Recording stops.
TIMER
Remaining Recording Time 1:58 SP
RECORDING
3/26TUE 12:55 PM
[Note]
CHANNEL
64 ABC
DATE
3/ 26 TUE
ON
OFF
MODE
SP
≥The actual time recorded may be longer than the program
itself when television programs are recorded using VCR
Plusi.
3:00 PM
2:30 PM
Enter Title
≥If you don’t select a recording mode when using VCR Plus+
codes to make a timer recording, the unit sets the mode
selected on the unit at that time (unless the mode is “XP”, in
which case the unit sets “FR” as the mode).
≥“All timer programs are occupied.” appears if there are
already 16 programs.
≥CHANNEL (Channel number and caption)
≥DATE
Current date
;
Next day up to one month later minus one day
≥The remaining time displayed is based on the current
recording mode.
;
Weekly timer: SUN-SAT>MON-SAT>MON-FRI
;
≥When you program successive timer recordings to start
immediately one after the other, the unit cannot record the
part at the beginning of the later programs (a few seconds
when recording with DVD-RAM and approximately 30 sec-
onds when recording with DVD-R).
Daily timer: WEEKLY SUN>--->WEEKLY SAT
;
(Return to Current date)
≥ON (Start time)/OFF (Finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥MODE (Recording mode ➜page 15)
SP>XP>FR>EP>LP (>Return to SP)
≥Enter Title
Select “Enter Title” using [2, 1] and press [ENTER]
(➜page 27).
≥If you set DST (Daylight Saving Time) to ON when manually
setting the clock (➜page 49), timer recording may not work
when summer switches to winter and vice versa.
≥“ ” flashes when the unit couldn’t go to timer recording
standby (e.g., a disc isn’t loaded, a disc that can’t be
recorded to is loaded, or the disc is protected). Check the
disc carefully.
25
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
Message displayed in the CHECK line
Some of the information shown in the CHECK line may not be
correct while you are recording.
Enable: Displayed if the recording can fit in the remaining space
on the disc.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a maxi-
mum of one month from the present time) based on the
time remaining on the disc.
Numbered
buttons
! : It may not be possible to record because of write pro-
tection, because there is no more space left or because
the number of possible programs has reached its maxi-
mum. Please check the disc.
2 Press [PROG/CHECK] or [RETURN].
The timer recording list disappears.
3, 4, 2, 1
ENTER
Change or delete the program
1 Press [PROG/CHECK].
The timer recording list appears.
2 Press [3, 4] to select the program.
[RAM] [DVD-R]
≥You may also select programs by inputting a 2-digit
number using the numbered buttons.
e.g., “5”: [0] ➜ [5]
Check programs
“15”: [1] ➜ [5]
≥Press [2, 1] to move to the page preceding or following
the one on display.
1 Press [PROG/CHECK].
TIMER
RECORDING
3 Press [CANCEL] or [ADD/DLT] to
Remaining Recording Time 1:57 LP
3/26TUE 1:19 PM
delete,
No CHANNEL
DATE
ON
OFF
1:22 PM
2:40 PM
MODE CHECK
LP Enable
LP # 3/31
01
02
64 ABC 3/ 26 TUE 1:19 PM
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
W
W
-
SUN-SAT
2:30 PM
64 ABC
03 64 ABC 3/ 25 MON 2:30 AM
64 ABC WEEKLY MON 5:00 AM
05 64 ABC
3:30 AM SP Overlap
6:00 AM
LP
3/ 26 TUE 9:00 AM 10:00 AM SP
04
# 3/28
F
X
06
07
SP
64 ABC 3/ 26 TUE 8:00 AM
64 ABC 3/ 26 TUE 10:00 AM 11:00 AM
9:00 AM
SP
4
If you pressed [ENTER] in step 3,
New Timer Program
SELECT
ENTER
Move through the items with [2, 1]
and change the settings with [3, 4]
and press [ENTER].
Press ENTER or VCR Plus+ to
store new program
RETURN
Icon explanations
W
The times overlap those in another program.
Note the following if times overlap:
5 Press [PROG/CHECK] or [RETURN].
The timer recording list disappears.
The program with the earlier start time receives priority.
Recording of the program with the later start time starts when
the earlier program finishes recording.
If you make two programs with the same start time, the one you
programmed last receives priority.
-
You stopped recording of a weekly or daily timer recording.
The icon disappears the next time the timer starts recording.
¥ This program is currently recording.
F The disc was full or the maximum number of programs or
scenes was reached so the program failed to record.
The material was copy-prohibited so it was not recorded.
X The program failed to record for some other reason.
≥Programs that failed to record are displayed gray. They are auto-
matically deleted from the timer recording list at 4 a.m. two days
later.
To put the unit on timer recording standby
[Note]
Press [Í, DVD POWER].
≥A Timer recording that is taking place in a recording mode other
than “FR” may have its end time altered.
≥Even if the power is off you can still view timer recording informa-
tion by pressing [PROG/CHECK].
The unit turns off and “
” lights on the unit’s display.
26
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
Preparation
Release protection (cartridge ➜page 11, program ➜page 32, disc
➜page 34) before proceeding.
1
After the titling screen appears
Press [3, 4, 2, 1] to select the
character and press [ENTER].
Title field: shows the text you have entered
Numbered
buttons
Enter Title
_
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
¢
%
&
3
4
5
d
g
j
h
k
i
fl
O
[
L
O
R
V
Y
?
l
N
]
@
_
;
π
ERASE
SET
3, 4, 2, 1
m
n
o
6
7
8
M
P
T
ENTER
S
p
t
q
u
x
'
r
s
{
(
)
-
––
100
0
v
}
9
0
W
.
Z
!
w
"
y
:
z
;
|
\
^
SELECT
ENTER
`
100
SPACE
RETURN
Repeat step 1 to enter other characters.
2 Press [∫].
The title is entered and the screen disappears.
≥You can also finish entering the title by selecting “SET” and
pressing [ENTER].
[RAM] [DVD-R]
This page shows how to enter text for:
≥Program titles for timer recording (➜pages 24 and 25)
Program titles (➜page 32)
Using the numbered buttons to enter characters
e.g., entering the letter “R”
≥Play list titles (➜page 30)
≥Disc titles (➜page 34)
1 Press [7] to move to the
5
J
K
N
Q
U
L
O
R
V
7th row.
2 Press [7] twice to highlight
“R”.
You can enter up to:
≥64 characters (DVD-RAM)
≥40 characters for a disc title (DVD-R)
≥44 characters for a program title (DVD-R)
7
7
6 M
7
3 Press [ENTER].
P
T
S
7
8
To erase a character
1 Press [3, 4, 2, 1] to select the character you want to
erase in the title field.
2 Press [;].
You can also erase characters by selecting “ERASE” and press-
ing [ENTER].
[Note]
≥The full title is shown in the Properties screen (➜page 30 and 32),
but if you enter a long title, only part of it is shown in the program
list or play list screen.
≥If you enter a long title, only part of it is shown in the menu screen
after finalization. [DVD-R]
27
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating play lists
1
While stopped
Press [PLAY LIST].
2 Press [3, 4] to select “–– ––/––” and
press [ENTER].
PLAY LIST
Numbered
buttons
---
---
---
---
---
---
No DATE TOTAL SCENE
TITLE
EDIT
1
1
1
1
1
1
3
01 10/23 0:03 006
02 10/26 0:07 006 USJ
03 10/21 0:06 004 Auto action
Dinosaur
No.
0
~
9
SELECT
ENTER
- - - -
/- - - -
:
- - - - -
RETURN
3
3 Press [ENTER] at the start point.
3, 4, 2, 1
The length of the
PLAY LIST No.4
ENTER
PLAY LIST
Creation
Scene No.
1
whole contents
01
PLAY
on the disc.
Start
End
Next
Exit
The location of
the start point.
3
0 : 00 . 05
SELECT
ENTER
Start
End
-- : -- . --
RETURN
0 : 00 . 05
≥Use [6], [5] and slow-motion (➜page 18) to find the
start and end points.
≥Pressing [:], [9] allows you to select other programs.
[RAM]
4 Press [ENTER] at the end point.
Specify start and end points to create scenes, then specify the
order in which they are to be played. These scenes are not
recorded separately so this doesn’t use much capacity.
PLAY LIST No.4
PLAY LIST
Creation
Scene No.
01
1
You can create a maximum of 99 play lists and 999 scenes.
Start
End
Next
The location of
the end point.
Preparation
Exit
Release protection (cartridge ➜page 11, disc ➜page 34) before
0 : 01 . 20
End
3
3
SELECT
ENTER
proceeding.
Start
RETURN
0 : 01 . 20
0 : 00 . 05
To specify another scene
Select “Next” and press [ENTER], then repeat steps 3 and 4.
5 Press [3, 4] to select “Exit” and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [PLAY LIST].
To stop partway through
Press [RETURN].
For your reference
≥You cannot specify an end point before a start point.
≥You may not be able to specify points within 3 seconds of each
other.
≥Play pauses if the end of the last program on the disc is reached
during this procedure.
≥Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.
28
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing play lists
4 Press [3, 4, 2, 1] to select the
scene and press [ENTER].
1
While stopped
The scene you select is played.
Press [PLAY LIST].
To show scene 10 and later
Press [3, 4, 2, 1] to select “Next” and press [ENTER].
≥You can also select a page of scenes by entering a 3-digit
number with the numbered buttons.
PLAY LIST
001
004
002
---
003
---
e.g.,
“5”: [0] ➜ [0] ➜ [5]
“15”: [0] ➜ [1] ➜ [5]
No DATE TOTAL SCENE
TITLE
EDIT
1
1
1
1
1
1
3
01 10/23 0:03 004 Dinosaur
02 10/26 0:07 006 USJ
03 10/21 0:06 004 Auto action
No.
0
~
9
SELECT
ENTER
- - - -
/- - - -
:
- - - - -
To stop scene play
RETURN
3
Press [∫]. (The scene list appears.)
2 Press [3, 4] to select the play list
To clear the scene list
Press [RETURN].
and press [ENTER].
≥You can also select play lists by entering a 2-digit number
To erase a play list or a play list scene
during playback
with the numbered buttons.
e.g.,
“5”: [0] ➜ [5]
“15”: [1] ➜ [5]
All the scenes in the play list are played.
1 Press [ERASE].
A confirmation screen will be displayed.
To stop play list play
Press [∫]. (The play list appears.)
2 Press [2] to select “Erase” and press
Playing play list scenes
[ENTER].
1
While stopped
Press [PLAY LIST].
2 Press [3, 4] to select the play list
that contains the scene you want to
play and press [1].
PLAY LIST
001
004
002
003
---
---
No DATE TOTAL SCENE
TITLE
EDIT
3
01 10/23 0:03 004 Dinosaur
02 10/26 0:07 006 USJ
03 10/21 0:06 004 Auto action
1
1Play Scenes
1
No.
~
0
9
1
SELECT
ENTER
- - - -
/- - - -
:
- - - - -
Edit Scenes
1
RETURN
3
1
PL Copy
PL Erase
Enter Title
Properties
3 Press [3, 4] to select “Play Scenes”
and press [ENTER].
PLAY LIST
Play Scenes
1 10/23 0:03 004
Dinosaur
001 00:00.19
004
002
003
---
---
Select Page
0
~
9
SELECT
ENTER
---
---
---
Prev.
001 / 001
Next
RETURN
Page no./Total page no.
29
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing play lists
[RAM]
30
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Add (maximum of 999 scenes)
PLAY LIST No.3 Dinosaur
PLAY LIST
Press [3, 4] to
select "Exit and
press [ENTER].
The new scene is
inserted before the
highlighted scene.
Add Scenes
Scene No.
5
01
PLAY
Press [3, 4, 2, 1]
"
Start
End
Press [ENTER]
at the end point
of the scene.
Press [ENTER]
at the start point
of the scene.
to select the place
where you want to
add the scene and
press [ENTER].
Next
Exit
3
0 : 00 . 05
End
SELECT
Start
0 : 00 . 05
ENTER
RETURN
--:--.--
Press [3, 4] to select "Next
(Repeat to add other scenes.)
"
and press [ENTER].
∫ Move
Press [3, 4, 2, 1] to select the place
where you want to move the scene to
and press [ENTER].
The scene is moved and inserted before the
Press [3, 4, 2, 1]
to select the scene
and press [ENTER].
highlighted scene.
Repeat to move other scenes.
∫ Re-edit
PLAY LIST No.3
PLAY LIST
Re-edit Scenes
Press [3, 4] to
Scene No.
1
01
PLAY
select "Exit and
"
Prev.
Start
End
Press [3, 4, 2, 1]
to select the scene
and press [ENTER].
Press [ENTER] at
the start point of
the scene.
Press [ENTER]
at the end point
of the scene.
press [ENTER].
The re-edited
scene replaces the
old one.
Next
Exit
3
3
0 : 02 . 08
SELECT
ENTER
Start
End
RETURN
0 : 02 . 08
0 : 00 . 05
Press [3, 4] to select "Prev." or "Next" and press
[ENTER]. (Repeat to re-edit other scenes.)
∫ Erase
[Note]
Press [2] to select
"Yes and press
[ENTER].
The selected scene is
erased from the play
list.
The play list itself is erased if
you erase all the scenes in it.
Once a scene has been
erased, it is
irretrievable. Check
carefully before
"
Press [3, 4,
2, 1] to select
the scene and
press [ENTER].
Erase Scenes
Erase this scene?
Yes
No
SELECT
RETURN
ENTER
Repeat to erase other scenes.
31
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing programs
Operation
Erase Program
Erase Program
Press
[DIRECT NAVIGATOR].
[RAM] [DVD-R]
Remaining Recording Time 0 : 58 SP
Corresponding PLAY LIST will also be erased.
Erase
Cancel
: 9
Erase
SELECT
RETURN
The program, and play lists
created from it, are erased
irretrievably when you use this
procedure. Check carefully before
proceeding.
ENTER
SELECT
ENTER
DIRECT NAVIGATOR
No CH
DATE
TIME
TITLE
EDIT
1
3
01
02
03
4
6
6/20 WED 10 : 00 AM Dinosaur
6/20 WED
6/20 WED
1
Auto action
9 : 00 PM
11 : 00 PM USJ
1
13
1
Enter Title
_
3
1
Enter Title
SELECT
ENTER
TOTAL 3
No
~
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
6
b
e
7
c
f
8
i
/
9
0
¢
%
&
0
9
RETURN
a
d
g
j
j
l
$
3
4
5
[RAM] [DVD-R]
h
k
i
fl
O
[
L
O
R
V
Y
?
l
N
]
@
_
;
π
ERASE
SET
m
n
o
6
7
8
M
P
T
S
p
t
q
u
x
'
r
s
{
(
)
-
Entering text
➜
page 27
ññ
100
0
v
}
9
0
W
.
Z
!
w
"
y
:
z
;
|
\
Press [ , ] to select
the program.
^
SELECT
ENTER
`
100
SPACE
RETURN
You can also select programs
by entering a 2-digit number
with the numbered buttons.
e.g., 5 [0] ➜ [5]
Properties
Properties
Dinosaur
[RAM] [DVD-R]
No.
1
On
1:02 PM
(
)
Date 6/20/ 2001 TUE Time 0:01 SP
CH
4
Program information (e.g., time and
date) is shown.
Press [ ] so the
submenu appears.
RETURN
ENTER
Protection
Set up Program Protection.
Protection
Press [ , ] to select
the item and press
[ENTER].
[RAM]
Yes
No
SELECT
RETURN
If set, this will protect the program
from accidental erasure.
ENTER
1
4
7
2
3
6
Numbered
buttons
CH
5
8
0
VOLUME
Shorten
Segment
Shorten Segment
9
03
PLAY
CANCEL
N
S
Start
End
[RAM]
100
SLOW/SEARCH
SKIP
Next
,
Exit
U
The program segment, and play
list scenes created from it, are
erased irretrievably when you use
this procedure. Check carefully
before proceeding.
0 : 00 . 01
End
SELECT
Start
DIRECT
NAVIGATOR
ENTER
DIRECT NAVIGATOR
PLAY LIST
RETURN
ñ
:
ñ
ñ
.
ñ
ñ
ñ
:
ñ
ñ
.
ñ
ñ
MENU
TOP
MENU
ENTER
,
,
ENTER
,
FUNCTIONS
RETURN
RETURN
Divide
Program
To clear the program list
Press [DIRECT NAVIGATOR].
Divide Program
03
PLAY
N
S
Preview
Divide
[RAM]
Exit
To stop set up process
Press [RETURN].
Select a point at which to divide the
program into two.
0 : 00 . 01
SELECT
Divide
ENTER
RETURN
ñ
:
ñ
ñ
.
ñ
ñ
For your reference
You can only access Properties if
the disc is write-protected. Release
You must be sure you wish to
divide a program because once a
program has been divided,
it cannot be returned to its
original form.
protection (cartridge
➜
page 11, disc
➜
page 34) to access other items.
[RAM]
32
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Press [2] to
select "Erase and
press [ENTER].
The program is erased.
"
[Note]
≥ The disc’s available recording time may not increase after
erasing short programs.
≥ Computer data cannot be erased.
≥ The available recording time on DVD-R does not increase when
you erase programs.
DIRECT NAVIGATOR
No CH
DATE
TIME
TITLE
EDIT
1
3
The lock symbol
appears when the
program is write-
protected.
6/20 WED 10 : 00 AM Dinosaur
01
02
03
4
6
1
6/20 WED
6/20 WED
Auto action
9 : 00 PM
Press [2] to set
protection and press
[ENTER].
1
11 : 00 PM USJ
13
1
3
1
SELECT
ENTER
TOTAL 3
No
0
~
9
RETURN
Shorten
Shorten
Segment
Segment
Press
03
PLAY
03
N
S
N
S
Start
End
Start
End
Press [ENTER] at
the end point of the
section you want to
erase.
[ENTER] at
the start point
of the section
you want to
erase.
Next
Next
Exit
Exit
3
0 : 00 . 01
End
33
0 : 10 . 15
End
SELECT
SELECT
Start
Start
ENTER
ENTER
RETURN
RETURN
ñ
:
ñ
ñ
.
ñ
ñ
0
:
00
.
01
0 : 00 . 01
0 : 10 . 15
Press [3, 4] to
select "Exit and
press [ENTER].
Press [3, 4] to select "Next" and press [ENTER], then press [2] to
select "Erase and press [ENTER].
"
"
Repeat to enter other sections.
Shorten Segment
[Note]
Press [2] to
select "Erase
and press
Remaining Recording Time
0:19 SP
≥ Use [6], [5] and slow-motion
(
➜
page 18) to find the start and end points.
Corresponding PLAY LIST will also be erased.
"
≥ Play pauses if the end of the program is reached during this procedure.
≥ You may not be able to specify points within 3 seconds of each other.
≥ You cannot specify an end point before a start point.
Erase Cancel
SELECT
RETURN
ENTER
[ENTER].
≥ You cannot specify points on still pictures in the program.
≥ The disc’s available recording time may not increase after erasing short segments.
Press [2] to select
"Divide and press
[ENTER].
Divide Program
"
Press [ENTER] at
the point you want
to divide the
Press [3, 4] to
Once you divide the program,
it will not be restored to the original.
select "Exit
and press
[ENTER].
"
Divide
Cancel
The program is divided.
SELECT
RETURN
ENTER
program.
To confirm the division point
[Note]
Press [3, 4] to select “Preview” and press [ENTER]. (Play will
begin from a point 10 seconds prior to and after the division
point.)
≥ The divided programs retain the title and CPRM property (➜ page
50) of the original program.
≥
A minute portion of the recording directly preceding the division
point may be lost.
To change the division point
Press [3, 4] to select “Divide” and press [ENTER] at the point
you want to change.
≥ It is not possible to carry out Divide Program in the following cases:
–when the program is extremely short.
–when the total number of programs is more than 99.
33
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc setting
Operation
Enter Title
_
1
2
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
¢
%
&
Enter Title
[RAM] [DVD-R]
While stopped
3
4
5
d
g
j
h
k
i
fl
O
[
Press [FUNCTIONS].
L
O
R
V
Y
?
l
N
]
@
_
;
π
ERASE
SET
m
n
o
6
7
8
M
P
T
S
p
t
q
u
x
'
r
s
{
(
)
-
Entering text
➜
page 27
ññ
100
0
v
}
9
0
W
.
Z
!
w
"
y
:
z
;
|
\
^
SELECT
ENTER
`
100
SPACE
RETURN
Press [3, 4, 2, 1] to
select "DISC SETTING"
and press [ENTER].
Disc Protection
Disc Protection
[RAM]
Set up Disc Protection.
DISC SETTING
If set, this will protect the disc from
accidental erasure.
Yes
No
e.g., DVD-RAM
DISC SETTING
Prog #
Used
7
Free
0 : 42 (SP)
0 : 58 Total Mark 10
Enter Title
Erase all programs
Disc Protection
Erase all programs
Format
Off
Erase all programs
All programs and PLAY LISTs will
be erased.
Is it OK to start erasing all programs?
SELECT
[RAM]
ENTER
RETURN
All programs and play lists created
from them will be erased
Yes
No
irretrievably when you use this
procedure. Check carefully
before proceeding.
Press [3, 4] to select
the item and press
[ENTER].
Preparation
Release protection (cartridge
page 11, program page 32, disc
page 34) before proceeding.
➜
➜
➜
Formatting erases all
contents on the disc,
including computer data.
Check carefully before
proceeding.
Format
[RAM]
Some DVD-RAM are unformatted.
Format them before using them in
this unit. Formatting also allows you
to erase the entire contents of a disc.
Format disc
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Is it OK to start formatting the disc?
1
4
7
2
3
6
Preparation
CH
≥
Release protection (cartridge
page 11) before proceeding.
➜
5
8
0
VOLUME
9
Yes
No
≥
If the disc is dirty, clean it with the
recommended cleaner (➜
CANCEL
100
SLOW/SEARCH
SKIP
page 50) before formatting.
U
DIRECT NAVIGATOR
PLAY LIST
Finalize
MENU
TOP
MENU
Finalize
3, 4, 2, 1
ENTER
ENTER
This will take approximately 10 minutes.
Is it OK to start finalizing the disc?
[DVD-R]
(DVD-R recorded on this unit only)
FUNCTIONS
RETURN
Yes
No
You can play DVD-R on compatible
DVD players by finalizing them on
this unit, effectively making them into
DVD-Video.
FUNCTIONS
RETURN
For your reference
The markers you entered (➜ page
20) will be lost.
To stop set up process
Press [RETURN].
34
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC SETTING
Prog #
Used
7
Free
0 : 42 (SP)
0 : 58 Total Mark 10
Press [2] to set disc
protection and press
[ENTER].
Enter Title
Disc Protection
Erase all programs
Format
On
The lock symbol appears
closed when the disc is
write-protected.
SELECT
ENTER
RETURN
Press [2] to select
"Start" and press
[ENTER].
Press [2] to
select "Yes" and
press [ENTER].
All programs
and play lists
are erased.
Press [2] to
select "Start" and
press [ENTER].
Formatting starts.
≥ A message appears when
formatting is finished.
Press [2]
to select
"Yes" and
press
Press
[ENTER]
to complete
the procedure.
"
"
[ENTER].
Press [2] to
select "Start" and
press [ENTER].
Finalizing starts.
≥ A message appears when
finalizing is finished.
Press [2]
to select
"Yes" and
press
Press
[ENTER]
to complete
the procedure.
"
"
[ENTER].
After finalizing..
≥ You cannot record or perform editing such as giving titles
and erasing programs.
≥ Programs longer than 5 minutes are divided into about
five-minute chapters.
≥ These DVD-R can be played on other Samsung DVD
players, but this is not guaranteed. Play may not be possible
due to the player you are using, the DVD-R, or the condition
of the recording. Play the disc using this unit if you
experience problems with other equipment.
Visit Samsungís website for more information about DVDs.
35
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Using on-screen menus
Disc menu
Not available when playing CDs and MP3 discs.
e.g., DVD-RAM
Disc
Play
Video
Audio
Î Digital 2/0 ch
1
Sound track
Subtitle
OFF
L R
Audio channel
Numbered
buttons
Item
Sound track
Content
Soundtrack language [DVD-V]
See [A] below.
Audio attribute [RAM] [DVD-R] [DVD-V]
See [B] below.
Karaoke vocals, on and off
(Karaoke [DVD-V] only)
Solo: ON()OFF
Duet: OFF()V1+V2()V1()V2
3, 4, 2, 1
ENTER
^=======J
Subtitle
Subtitle language [DVD-V]
See [A] below.
Subtitle on/off [RAM] [DVD-R] [DVD-V]
Angle number [DVD-V]
Angle
Audio channel
PBC
[RAM] [VCD] (➜page 23)
Playback control on/off [VCD]
Indicates whether menu play (playback
control) is on or off.
Common procedures
[A] Soundtrack/Subtitle language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR:Korean
MAL:Malay
VIE: Vietnamese
THA: Thai
1 Press [DISPLAY].
e.g., DVD-RAM
Disc
Play
Video
Audio
1
Î Digital 2/0 ch
Sound track
Subtitle
OFF
L R
¢: Others
Audio channel
[B] Audio attributes
Menu
Item
Setting
LPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz):Sampling frequency
b (bit):Number of bits
ch (channel):Number of channels
2 Press [3, 4] to select the menu and
press [1].
e.g., 3/2 .1ch
3 Press [3, 4] to select the item and
.1: Subwoofer signal (not displayed if there
is no subwoofer signal)
press [1].
4 Press [3, 4] to select the setting.
0: No surround
1: Mono surround
2: Stereo surround (left/right)
To clear the on-screen menus
Press [DISPLAY].
1: Center
2: Front left
3: Front left
i
i
Front right
Front right
For your reference
iCenter
≥The screens depend on the disc contents.
≥Depending on the condition of the unit (playing, stopped, etc.)
and disc contents, there are some items that you cannot select or
change.
For your reference
≥When playing back recordings of SAP broadcasts, “1+1 ch” will
be displayed.
≥You can only select subtitles, soundtracks, and angles if they are
recorded on the disc.
≥Some discs allow changes to soundtracks, subtitles, and angles
only by using the disc’s menus.
≥If the subtitles overlap closed captions recorded on discs, turn
the subtitles off.
36
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Play menu
e.g., DVD-RAM
Disc
Play
Video
Audio
OFF
Repeat play
Marker
1s10
††††††††††
Item
Content
Remarks
Repeat play
Each time you press [3, 4]:
[RAM] [DVD-R]
PRG: Program
All
≥You cannot use repeat play to repeat an entire DVD-Video.
≥Repeat play does not work if the disc’s elapsed play time is
not shown on the unit’s display.
[DVD-V]
Chapter
Title
≥[ERASE] does not work while in repeat play mode.
PL: Play list ([RAM])
OFF
OFF
If the Video CD has playback control
1 While stopped (the screen saver is
on the television), press the num-
[VCD] [CD]
Track
All
[MP3]
Track
Group
OFF
bered buttons to select
(➜page 18).
a
track
2 Select the repeat mode.
OFF
To cancel: Select “OFF”.
Marker
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
(➜page 20)
—
Audio menu
Not available when playing Video CDs, CDs and MP3 discs.
e.g., DVD-Video
Disc
Play
Video
Audio
OFF
OFF
V. S. S.
Dialog Enhancer
Item
Content
Remarks
V.S.S.
[RAM] [DVD-R] [DVD-V]
≥Turn off the surround effects on the other equipment.
≥V.S.S. will not work, or will have less effect, with some discs.
≥Turn V.S.S. off if it causes distortion.
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front
speakers only. The effect is broadened and sound
seems to come from virtual speakers on either side if
the disc has surround signals recorded on it.
N^at=ura=l ()=Em=ph=asi=s()=OJFF
Dialog
[DVD-V]
—
Enhancer
(Dolby Digital, 3-channel or over only, including a
center channel)
The volume of the center channel is raised to make
dialog easier to hear.
ON()OFF
37
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Using on-screen menus
Video menu
Not available when playing CDs and MP3 discs.
[RAM] [DVD-R] [DVD-V] [VCD]
Disc
Play
Video
Audio
Normal
ON
Picture
MPEG-DNR
Item
Picture
Content
Normal: Default setting
Soft:
Soft picture with fewer video
artifacts
Fine:
Details are sharper
Cinema: Mellows movies, enhances detail
in dark scenes.
MPEG-DNR
You can turn the recommended settings for
3D NR, block NR, and mosquito NR on and
off.
ON()OFF
3D NR:
Reduces overall noise
Smoothes block noise
Block NR:
Mosquito NR: Reduces the smudging that
appears around contrasting
sections of the picture
∫ When you have set “TV Type” to “Aspect 4:3 &
480P” or “Aspect 16:9 & 480P” in SETUP
(➜page 10)
Disc
Play
Video
Audio
Normal
ON
Picture
MPEG-DNR
Progressive
ON
Auto 1
Transfer
Item
Content
Progressive
ON:
Enables progressive output
OFF: Disables progressive output
Transfer
(When progres-
sive output is on)
Select the method of conversion for pro-
gressive output to suit the type of material
being played (➜page 50, Film and video).
Auto1 (normal): For film material
Auto2: For film material (the same as
Auto1, but able to convert 30-
frame-per-second progressive
video.)
Video: For video material
38
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen displays
Displays appear on the television when you operate the unit to let
you know what operation was performed and what condition the
unit is in.
≥You can change the setting in the SETUP menu so the first dis-
play does not appear automatically (➜page 47, Display—Status
Messages).
Changing the information displayed
Press [STATUS].
The display changes each time you press the button.
e.g., DVD-RAM
DVD-RAM
REC
PLAY
LR
πRemain
π PRG2 0:05.14 XP
π PRG1 0:00.10 SP
6/8 10:15 PM
0:50 XP
DVD-RAM
REC
PLAY
LR
Bit Rate
DVD-RAM
REC
0 . . . . 5 . . . . 10
π
REC 5.4Mbps XP
π PLAY 3.1Mbps SP
PLAY
LR
No display
Display examples
a Disc indication
c Current recording or play status/input channel
a
DVD-RAM
REC
and caption (if entered)
b Audio type (➜page 23)
Shows the selected audio type.
≥During reception
REC:
Recording
c
PAUSE: Recording paused
PLAY
LR
PLAY: Playing
;:
5: Fast forwarding
Reverse slow-motion D: Slow-motion
Playing paused
Stereo: Stereo is selected
Mono: Monaural is selected
SAP: Secondary audio program is
selected
b
6:
Rewinding
e.g., DVD-RAM
E:
(“((” appears when the type you have
selected is actually being received.)
≥During play
LR, R, L:
a stereo program is recorded
MAIN, SAP: an SAP program is recorded
d The current date and time
j Selected group and track name
e.g., DVD-RAM
g
e Elapsed recording time/recording
mode
k Selected group and track number
d
e
f
Remain
6/8 10:15 PM
π PRG2 0:05.14 XP
π PRG1 0:00.10 SP
0:50 XP
π
l Selected track no./Total track no.
in all groups
h
m
f Elapsed play time of a program
playing/mode at the time of recording
m Elapsed play time of a track play-
ing
i
k
g Available recording time and
recording mode
e.g., MP3
h Approximate volume of recording
d
j
π G1
Total
T8
T8/18
6/9 10:15 PM
1:35
i Play position in the volume of
recording
Group: RootsMusic
Track: 008 Holy.mp3
l
n Recording mode
or I/P/B display when paused
(➜page 50)
p Video bit-rate when playing
q Bit-rate display§
Show as Mbps (Megabits per
seconds) during play and
recording, or kbit (kilobits)
while paused.
n
e.g., DVD-RAM
o Video bit-rate when recording
Bit Rate
π
0 . . . . 5 . . . . 10
o
p
REC 5.4Mbps XP
π PLAY 3.1Mbps SP
§
The method of calculating bit-rate for recording and playing is dif-
ferent so there may be differences in the figures displayed. (Values
are approximate.)
q
39
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Theater
Refer to the relevant pages for details.
Enjoying CATV/Satellite broadcasts
Reference
pages
Reference
pages
What you want to do
How to do it
Settings
Connect a cable TV box or
satellite receiver.
41
Tune to channels correctly.
9
Enjoying CATV/Sat-
ellite broadcasts
Change the necessary
settings on the equipment
you have connected.
—
Enjoying more powerful sound
Digital connection
Connect to an amplifier
with built-in decoders.
42
[A]
SETUP—Audio—
47
Enjoying 5.1-
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital and DTS to
suit the equipment.
channel surround
sound with Dolby
Digital and DTS
Change speaker settings on
the amplifier.
—
Analog connection
Connect to an analog
amplifier or system
component.
42
[B]
SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to Off.
47
47
Enjoying stereo or
Dolby Pro Logic
Digital connection
Connect to a digital
amplifier or system
component.
42
[A]
SETUP—Audio—
Digital Audio Output
≥Set PCM Down Conversion
to suit the equipment.
≥Set Dolby Digital to PCM.
≥Set DTS to Off.
Other uses
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
Record to digital recording equipment or cassette deck (➜page 42)
Record from a video cassette recorder (➜page 15)
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
40
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off.
Connecting a cable TV box/satellite receiver
You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming.
≥Consult your service provider regarding appropriate cable box or satellite receiver.
≥Select the applicable input on your television to view the output from your cable box or satellite receiver, or the applicable video input on the
television is connected using the audio and video connections.
One cable TV box/satellite receiver
AUDIO VIDEO
Two cable TV boxes
You can record and view both scrambled and unscrambled
channels if connections are made as shown in the diagram below.
VHF/UHF
RF IN
IN
IN
R
L
AUDIO VIDEO
VHF/UHF
RF IN
IN
IN
R
L
red white yellow
Television
red white yellow
Television
Audio/Video cable
(included)
Audio/Video cable (included)
75 ≠ coaxial cable
red white yellow
(included)
Connect with 75 ≠
coaxial cable
red white yellow
RF IN
(L1)
Y
P
B
PR
OPTICAL
RF IN
RF OUT
)
Y
P
B
PR
COMPONENT
VIDEO OUT
(480P/480I)
VHF/UHF
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(L3)
R-AUDIO-L
VIDEO S-VIDEO
OPTICAL
RF OUT
This unit
COMPONENT
VIDEO OUT
(480P/480I)
VHF/UHF
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
)
R-AUDIO-L
VIDEO S-VIDEO
75 ≠ coaxial cable
This unit
Switch
box
RF OUT RF IN
VHF/UHF
OUT
IN
IN2
IN1
or
Cable TV box
Cable TV box
DSS receiver
To household
IN
OUT
IN
OUT
Cable TV
box
To household
cable TV jack
2-way
splitter
home satellite system
(Dishnetwork/DSS) jack
OUT1 OUT2
IN
[Note]
When a home satellite system (Dishnetwork/DSS) is connected,
auto tuning and auto clock setting may not operate properly. Set
the clock manually (➜page 49).
To household
cable TV jack
≥Change the video input on the television when you want to watch
another program while recording.
≥You cannot do a timer recording unless the channel is first
selected on the cable TV box.
≥Change the video input on the television when you want to watch
another program while recording.
≥You cannot do a timer recording unless the channel is first
selected on the cable TV box or DSS receiver.
41
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Theater
Connecting an amplifier or system component
This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder. You must connect a unit with a
Dolby Digital or DTS decoder to enjoy surround sound.
Digital connection
Analog connection
A
B
To enjoy stereo or Dolby Pro Logic
Connect an analog amplifier or system
component.
To enjoy multi-channel surround
sound
Connect an amplifier with
To enjoy stereo or Dolby Pro Logic
Connect a digital amplifier or system
component.
a
built-in
decoder or a decoder-amplifier combi-
nation.
≥Change the settings in “Digital Audio
Output” (➜page 47).
≥Change the settings in “Digital Audio
Output” (➜page 47).
Amplifier or system
component
[Note]
You cannot use DTS Digital Surround
decoders not suited to DVD.
AUX IN
L
R
Amplifier
OPTICAL IN
Insert fully, with this
side facing up.
Speakers (Example)
Connect three or more speakers
for surround sound.
Audio cable
Optical digital audio cable
Do not bend sharply when
connecting.
OPTICAL
R - AUDIO - L
RF IN
R-AUDIO-L
R-AUDIO-L
VIDEO S-VIDEO
(L1)
Y
P
B
PR
OPTICAL
RF OUT
COMPONENT
VIDEO OUT
(480P/480I)
VHF/UHF
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(L3)
R-AUDIO-L
VIDEO
S-VIDEO
VIDEO S-VIDEO
This unit
Recording to digital recording equipment or cassette tapes
Digital recording
Analog recording
You can record the digital signal directly to digital recording equip-
ment (➜ Connection [A] above).
You can record to a cassette deck or other recording equipment
(➜ Connection [B] above).
There are no limitations on recording analog signals as there are
with digital signals.
[Note]
≥With DVD, the following conditions must be met: a the disc
doesn’t have protection preventing digital recording, and b the
recording equipment can handle signals with a sampling fre-
quency of 48 kHz.
≥You cannot record DTS signals.
≥You cannot record MP3.
When recording DVDs, make the following settings.
V.S.S.: OFF (➜page 37)
PCM Down Conversion: On (➜page 47)
Dolby Digital: PCM (➜page 47)
DTS: Off (➜page 47)
42
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting other video equipment
Connecting to the L2 input terminals on the front
of the unit
Connecting to the input terminals on the rear of
the unit, L1 and L3
R-AUDIO-L
R-AUDIO-L
VIDEO S-VIDEO
(L1)
R-AUDIO-L
VIDEO
(L3)
VIDEO S-VIDEO
This unit
This unit
yellow white red
red white yellow
S video cable§
S video cable§
Audio/Video
cable (included)
Audio/Video cable
(included)
red white yellow
yellow white red
R
L
S VIDEO
OUT
AUDIO VIDEO
OUT OUT
Other video equipment
Connect to the video and audio output terminals.
Other video equipment
Connect to the video and audio output terminals.
§ By using the S video cable instead of the yellow video cable you
can make recordings of higher picture quality.
§ By using the S video cable instead of the yellow video cable you
can make recordings of higher picture quality.
[Note]
[Note]
If the audio output of the other equipment is monaural, connect to
L/MONO. (Both left and right channels are recorded when
connected through L/MONO.)
If audio output on the other equipment is monaural, use a stereo-
monaural conversion cable (not included).
43
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Other antenna connections
Other antenna connection to the unit
Other antenna connection from the unit
to the television
Use one of the following connections to suit the antenna lead.
Use one of the following connections to suit the antenna terminals
on your television. Refer to the television’s operating instructions.
∫ A single twin lead
300–75 ≠ transformer
(not included)
∫ A twin lead and coaxial plug terminal
Television
VHF
VHF/UHF band separator
(not included)
from the antenna
UHF
To this unit’s
RF IN terminal
(Flat)
Twin lead
300 ≠ cable
75 ≠ coaxial cable
∫ A twin lead terminal
∫ A twin lead and a coaxial cable
Television
from the antenna
75–300 ≠ transformer
(not included)
VHF or
UHF
VHF/UHF band mixer
(not included)
(Flat)
Twin lead
300 ≠ cable
75 ≠ coaxial cable
∫ Two twin lead terminals
Television
VHF
(Round)
75 ≠ coaxial cable
VHF/UHF band separator
(not included)
To this unit’s
RF IN terminal
UHF
∫ Two twin leads
75 ≠ coaxial cable
from the antenna
∫ Multiple antenna terminals
Split out
Television
300–75 ≠ transformer
(not included)
(Flat)
Twin lead
300 ≠ cable
ANT 1
VHF/UHF band mixer
(not included)
75 ≠ coaxial cable
ANT 2
To this unit’s
RF IN terminal
≥Connect to one of the terminals, then change the television’s
setting as necessary.
≥If your television has both lead and coaxial VHF terminals, use the
lead connection to minimize signal loss.
44
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the remote control code
1
While stopped
Press [SETUP] to show the menus.
SETUP
Antenna System
CATV
Auto Channel Setting
Channel Caption
Preset Channel Caption
Channel
Set Up
Disc
Manual Channel Caption
Numbered
buttons
VCR Plusi CH Setting
Video
Audio
TAB
SELECT
Display
TV Screen
RETURN
2 Press [3, 4] to select “Set Up” and
press [1].
3 Press [3, 4] to select “Remote Con-
trol Code” and press [ENTER].
3, 4, 2, 1
ENTER
4 Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5 While pressing [ENTER] on the
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
The remote control code on the remote control has been set.
6 Press [SETUP]
The following display appears when you use a remote control with
a different code.
The unit’s remote control code
If you are trying to use this unit’s remote control, change its code to
match the unit’s (➜ step 5).
45
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the unit’s settings
Summary of settings
This chart shows the initial settings for this unit. See page 48 for details on menu operation.
≥Underlined items are the factory presets.
Tabs
Menus
Antenna System (➜page 7)
Select to suit the type of antenna you are using. Channels are
set corresponding to the antenna system you select.
Auto Channel Setting (➜page 7)
Options
≥TV
≥CATV
Channel
The unit sets the channels automatically.
Preset Channel Caption (➜page 9)
You can give preset captions to the channels.
Manual Channel Caption (➜page 9)
You can set channel captions manually.
VCR Plusr CH Setting (➜page 8)
Set the guide channels for use with VCR Plus
i
timer recording.
Off Timer
≥2 hr
≥6 hr
≥Off
Set Up
Select how long the unit remains on when it is not being used.
Remote Control Code (➜page 45)
• Set Code 1 ≥Set Code 2 ≥Set Code 3
To avoid operating equipment other than the one intended
(when more than one remote controlled item is in the same
area), change the remote control code.
Auto Clock Setting (➜page 49)
The unit adjusts the clock automatically.
Manual Clock Setting (➜page 49)
You can adjust the clock.
Time Zone Adjust (➜page 49)
≥j1
≥0
≥i1
Adjust the time zone if it was not set correctly after auto clock
setting. This appears only after auto clock setting is complete.
Re-initialize Setting
≥Yes
≥No
This returns all values in the SETUP menus, except for the
clock, channel settings, ratings level, and display language,
to the default settings.
Audio
Some discs start in ≥English
a certain language ≥Original:
despite any
≥French
≥Spanish
Disc
[DVD-V]
Choose the audio language.
The original language of each disc will be
selected.
changes you make ≥Other ¢¢¢¢:Input a code (➜page 48).
here.
Subtitle
Choose the subtitle language.
≥Automatic:
If the language selected for “Audio” is not avail-
able, subtitles of that language will automatically
appear if available on that disc.
≥English
≥French
≥Spanish
≥Other ¢¢¢¢
Menus
≥English
≥French
≥Spanish
≥Other ¢¢¢¢
Choose the language for disc menus.
Ratings
Setting ratings (When level 8 is selected)
Set a ratings level to limit DVD-Video play. The password
screen is shown when you select levels 0 to 7.
To enter a password
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
≥Do not forget your password.
8 No Limit: All DVD-Video can be played.
1 to 7:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
0 Lock All: Prohibits play of all DVD-Video.
Changing ratings (When level 0–7 is selected)
≥Unlock Recorder
≥Change Password
2. Press [ENTER].
≥Change Level
≥Temporary Unlock
≥The lock symbol appears closed to show the rating is
locked.
3. Press [ENTER] to confirm the 4 digits.
If you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Press [SETUP] to select “Ratings” again and change ratings.
3-D Y/C Separation
Turn 3-D Y/C separation on or off.
≥
On: Reduces noise for recording by separating the luminance
Video
(Y) and color (C) signals received from the television station.
Off: Reduces the ghosting that occurs when recording fast mov-
ing images.
≥
Hybrid VBR Resolution
Switch between automatic and fixed hybrid VBR resolution
when recording.
≥Automatic: The unit automatically switches resolution rates during
recording. The unit reduces block noise, which occurs
during MPEG compression, by selecting the optimum rate.
≥Fixed:
The resolution rate is fixed to ensure the resolution
rate is not reduced.
46
DVD-R4000
Continued on next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tabs
Menus
Options
Still Mode
≥Automatic
Video
Select the type of picture shown when you pause play.
≥Field: Less blurred field stills are shown. Select if jittering
occurs when “Automatic” is selected.
≥Frame: Sharper frame stills are shown. Select if small text or fine
patterns cannot be seen clearly when “Automatic” is
selected.
Black Level Control
≥Input Level (Lighter/Darker):
Select normal, lighter or darker for adjusting the black level
control to the desired setting for picture enhancement.
Adjusts the black level of the input signal (e.g., L1, L2, L3)
≥Composite & S Video Output Level (Lighter/Darker):
when connected to a TV through the VIDEO OUT or S-VIDEO
OUT terminal
≥Component Video Output Level (Lighter/Normal/Darker):
when connected to a TV through the COMPONENT VIDEO OUT
(Y/PB/PR) terminal
PLAY & Audio during Search [RAM] [DVD-R] [DVD-V] [VCD]
Choose whether to have sound during the first level of fast-
≥On
≥Off
Audio
forward. Quick View (➜page 19) does not work if you
make the setting “Off”.
D. Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Select MTS (➜page 23)
≥On
≥Off
≥Main
≥SAP
Select whether to record the main or secondary audio type
(SAP) when recording to DVD-R.
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (➜page 42, [A]).
PCM Down Conversion
Select how to output audio with a sampling frequency of
≥
On: Converted to 48 kHz for output. Select if the equipment you con-
nect cannot process signals with a sampling frequency of 96 kHz.
96 kHz.
≥Off: Output as 96 kHz. There is no output if the disc has copy
protection. Select “On” in this case.
If you use analog connection, select this setting irrespective
of the type of equipment.
Dolby Digital
≥Bitstream: Select if the equipment you connected can decode
the signal.
If the equipment you connected can-
not decode the signal, the setting
must be changed to PCM or Off. If not,
signals the equipment cannot process
will be output by this unit, causing
high levels of noise which can dam-
age your hearing and the speakers.
≥PCM:
Select if the equipment you connected cannot
decode the signal.
DTS
≥Bitstream: Select if the equipment you connected can decode
the signal.
≥Off:
Select if the equipment you connected cannot
decode the signal.
Status Messages
≥Automatic
≥English
≥Off
Display
Choose whether to show on-screen messages automatically.
Language of Display Message
Choose the language for these menus and the on-screen
messages.
≥Español
≥Off
≥Français
Blue Background
≥On
Select “Off” if you do not want to have the unit show the blue
background when reception is weak.
FL Display
≥Bright
≥Dim
Changes the brightness of the unit’s display.
≥Automatic: The display dims during video playback and goes off
completely when the unit is turned off or on timer
recording standby. If you press a button the display
will brighten briefly. (At this time the power consumed
will be 0.4 W.)
TV Type (➜page 10)
Choose the setting to suit your television.
4:3 TV Settings for DVD-Video
≥Aspect 4:3 & 480I
≥Aspect 16:9 & 480I
≥Pan & Scan (➜page 50):
≥Aspect 4:3 & 480P
≥Aspect 16:9 & 480P
TV
Screen
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc).
≥Letterbox (➜page 50):
Video recorded for a widescreen is played in the letterbox style.
4:3 TV Settings for DVD-RAM
≥4:3:
Programs played as recorded.
Select how DVD-RAM widescreen picture is shown on a 4:3 ≥Pan & Scan: Video recorded for a widescreen is played as Pan & Scan.
standard aspect television.
≥Letterbox: Video recorded for a widescreen is played in the
letterbox style.
47
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the unit’s settings
Common procedures
See page 46 for menu and option details.
1
While stopped
Press [SETUP] to show the menus.
SETUP
Numbered
buttons
Antenna System
CATV
Auto Channel Setting
Channel Caption
Preset Channel Caption
Channel Settings
Set Up
Manual Channel Caption
Disc
VCR Plusi CH Setting
Video
Audio
Display
TV Screen
TAB
SELECT
RETURN
Tabs
Options
Menus
3, 4, 2, 1
ENTER
2 Press [3, 4] to select the menu’s tab
and press [1].
3 Press [3, 4] to select the menu and
press [ENTER].
4 Press [3, 4] to select the option and
press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Follow the on-screen
instructions, or read the following explanations.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
Language code list Input the code with numbered buttons.
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic: 7576
Guarani:
Gujarati:
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
Hausa:
Hebrew:
Hindi:
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish:
7265
7387
7273
Lithuanian: 7684
Macedonian: 7775
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian:8372 Turkmen:
Shona:
Sindhi:
Singhalese: 8373
Slovak:
Slovenian:
Somali:
Spanish:
8279
8285
8377
8365
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
Malagasy:
Malay:
7771
7783
Malayalam: 7776
Arabic:
6582
Maltese:
Maori:
Marathi:
7784
7773
7782
Armenian: 7289
Assamese: 6583
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
8378
8368
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese: 8673
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
Aymara:
6588
Italian:
Moldavian: 7779
Mongolian: 7778
Azerbaijani:6590
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Bashkir:
Basque:
6665
6985
Nauru:
Nepali:
7865
7869
8375
8376
8379
6983
Bengali; Bangla:
6678
Norwegian: 7879
Oriya: 7982
Pashto, Pushto:8083 Sundanese: 8385
8679
6789
8779
8872
7473
8979
9085
Bhutani:
Bihari:
Breton:
6890
6672
6682
Persian:
Polish:
7065
8076
Swahili:
Swedish:
Tagalog:
Tajik:
8387
8386
8476
8471
8465
8484
Bulgarian: 6671
Burmese: 7789
Byelorussian:6669
Cambodian:7577
Portuguese: 8084
Punjabi:
8065
8185
7178
7185
Latvian, Lettish:7686 Quechua:
Lingala: 7678
Tamil:
Rhaeto-Romance:8277 Tatar:
Catalan:
6765
48
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock settings
Preparation
Manual Clock Setting
If you connect the unit through a cable TV box or DSS receiver
(➜page 41), tune to your local PBS station before starting auto
clock setting. Use manual clock setting if auto clock setting does
not work or if there is no local PBS channel in your area.
3 Press [3, 4] to select “Manual Clock
Setting” and press [ENTER].
Manual Clock Setting
SETUP
1 Press [SETUP] to show the menus.
MONTH
1
DAY
1
YEAR
HOUR
MINUTE
2 Press [3, 4] to select “Set Up” and
/
2000
:
/
MON 12
00 PM
Channel
Set Up
Disc
Video
Audio
press [1].
DST
TIME ZONE
EST
OFF
SETUP
Off Timer
6 hr
SELECT
CHANGE
ENTER
Remote Control Code Set Code 1
Display
TV Screen
Clock Settings
Auto Clock Setting
Manual Clock Setting
Time Zone Adjust
Re-initialize Setting
RETURN
Channel
Set Up
Disc
Video
Audio
Proceed with the
steps described
below.
4 Press [2, 1] to select the item you
want to change and press [3, 4] to
change the setting.
0
SELECT
ENTER
TAB
Display
TV Screen
RETURN
MONTH(--)DAY(----)YEAR(--)HOUR (12-hour display)
^>TIME ZONE()DST()MINUTE(J
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m.
on the last Sunday in October.
Auto Clock Setting
3 Press [3, 4] to select “Auto Clock
TIME ZONE:
Setting” and press [ENTER].
EST()CST()MST()PST()AST()HST
(s5)
(s6)
(s7)
(s8)
(s9)
(s10)
Auto Clock Setting
SETUP
^---------------------------------------------------------------------------------J
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
5 Press [ENTER].
Channel
Set Up
Disc
Video
Audio
The clock starts.
Please push the ENTER key.
[Note]
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
Display
TV Screen
ENTER
RETURN
If you have not yet set channels, the “Auto Channel/Clock
Setting” screen appears.
Time Zone Adjust
4 Press [ENTER].
Adjust the time zone (s1 or r1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
Auto setting starts. This can take some time, up to a few
hours in some cases. (To stop auto clock setting, press
[RETURN].) The following screen appears when setting is
complete. Press [ENTER].
3 Press [3, 4] to select “Time Zone
Adjust” and press [ENTER].
Auto Clock Setting
SETUP
Time Zone Adjust
SETUP
Auto Clock Setting is complete.
Channel
Set Up
Disc
Video
Audio
j1
0
Channel
Set Up
Disc
4/4/2002 12:15 AM
DST............. ON
TIME ZONE.... CST
i1
4 Press [3, 4] to select “s1”, “0”, or
[Note]
“r1” and press [ENTER].
≥If the time was not set correctly, use manual clock setting or time
The “Set Up” screen (➜ step 2) reappears.
zone adjust.
≥DST, Daylight Saving Time, shows the summertime setting.
≥TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST=GMT s5, CST=GMT s6, MST=GMTs7, PST=GMTs8,
AST=GMT s9, HST=GMTs10, For other areas: xx hr
49
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Bitstream
Interlace and progressive output
This is the digital form of multi-channel audio data (e.g., 5.1 chan-
nel) before it is decoded into its various channels.
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan
lines. This is called 480p. The video signals output from this unit’s
COMPONENT VIDEO OUT terminals (Y, PB, PR) allow you to enjoy
higher quality pictures than if the signals were output from the
VIDEO OUT terminal or S-VIDEO OUT terminal.
CPRM (Content Protection for Recordable Media)
CPRM is the copyright protection technology that is used to protect
broadcasts that are allowed to be recorded only once (e.g. some
CATV broadcasts).
I/P/B
Decoder
MPEG 2, the video compression standard adopted for use with
DVD-Video, codes frames using these 3 picture types.
I: Intra coded picture
A decoder restores the coded audio signals on DVDs to normal.
This is called decoding.
This picture has the best quality and is the best to use when
adjusting the picture.
P: Predictive coded picture
This picture is calculated based on past I- or P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past and future I- and
P-pictures so it has the lowest volume of information.
Dolby Digital
This is a method of coding digital signals developed by Dolby Lab-
oratories. Apart from stereo (2-channel) audio, these signals can
also be multi-channel audio. A large amount of audio information
can be recorded on one disc using this method.
This unit is set to record using Dolby Digital in all recording modes.
Dolby Pro Logic
Linear PCM (pulse code modulation)
These are uncompressed digital signals. This unit outputs linear
PCM sound in 2 channels from the DIGITAL AUDIO OUT terminals.
A surround system where a 4-channel audio track is recorded as 2
channels and then is restored to 4 channels for play. The surround
channel is monaural and can reproduce up to 7 kHz.
Playback control (PBC)
DTS (Digital Theater Systems)
If a Video CD has playback control, you can select scenes and
information with menus.
This surround system is used in many movie theaters around the
world. There is good separation between the channels, so realistic
sound effects are possible.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television with an aspect ratio of 16:9. This
means you can view most material with the intended aspect ratio
on a widescreen television.
Film and video
DVD-Videos are recorded using either film or video. Usually, film is
recorded at 24 frames per second, the rate movies are filmed at,
while video is recorded at 30 frames per second.
Material with this ratio will not fit onto a standard television with an
aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and “Letter-
box”, deal with this problem.
Frame still and field still
Frames are the still pictures that go together to make a moving
picture. There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows
these fields one after the other to create frames.
Pan&Scan: The sides are cut off so the
picture fills the screen.
A still is shown when you pause a moving picture. A frame still is
made up of two alternating fields, so the picture may appear
blurred, but overall quality is high.
A field still is not blurred, but it has only half the information of a
frame still so picture quality is lower.
Letterbox: Black bands appear at the top
and bottom of the picture so
the picture itself appears in an
aspect ratio of 16:9.
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
DVD-Video, Video CD, CD
Wipe with a damp cloth and then wipe dry.
∫ Handling precautions
∫ How to hold a disc
≥Do not write on the label side with a ball-point pen or other writing
instrument.
Do not touch the recorded surface.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
≥Do not use scratch-proof protectors or covers.
≥Do not use discs printed with label printers available on the
market.
∫ If there is dirt or condensation on the disc
Moisture may condense on discs after they are brought inside from
the cold.
≥Do not use discs that are badly warped or cracked.
DVD-RAM and DVD-R
Clean only with the DVD-RAM/PD disc cleaner available.
Do not use cleaners or cloths for CDs to clean DVD-RAM and
DVD-R.
50
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
On the television
Page
No disc.
≥You haven’t inserted a disc. Correctly insert a disc that this unit can use.
≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
11
15
This is non-recordable disc.
≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
≥You inserted an unformatted DVD-RAM. Format the disc with this unit.
11
34
This disc is not formatted
properly.
Please format the disc in
‘DISC SETTING’ to record.
This disc cannot be read.
≥You inserted an incompatible disc.
11
—
Please check write protect tab
on the disc.
≥The write-protect tab on the cartridge is set to PROTECT.
Use a ballpoint pen or similar to release the write protection.
PROTECT
Contents of this disc are
protected.
≥The program is write-protected. Cancel the protection.
≥The disc is write-protected. Cancel Disc Protection.
32
34
Cannot finish recording
completely.
≥The program was copy-guarded.
≥No space left on the disc.
—
➜
➜
Create space by erasing any unwanted programs. [RAM]
Use a new disc. [RAM] [DVD-R]
32
—
—
≥Recording was not completed for some other reason.
Cannot record on the disc.
Disc is full.
≥The disc is scratched. Use another disc.
≥The disc is dirty.
≥You inserted an incompatible disc.
—
50
11
≥No space left on the disc.
➜
➜
Create space by erasing any unwanted programs. [RAM]
Use a new disc. [RAM] [DVD-R]
32
—
Please set clock.
≥The clock is not set.
49
This disc may not be played
in your region.
≥You tried to play a disc with a region number different from this unit’s region number. This
unit can only play discs with the region numbers compatible with this unit (1, All, or including
the number 1).
Cover
page
Your selection exceeds the
recorder’s rating limit.
≥A ratings level has been set for DVD-Video with this unit. Unlock the unit with “Ratings” in
“Disc”.
46
34
—
Finalizing is necessary for
compatible playback.
≥To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it.
Error has occurred. Please
press [ENTER].
≥A serious, but temporary error has occurred and one of the unit’s safety devices has
activated.
Press [ENTER]. The unit switches to the standby mode. Press [Í, DVD POWER] to turn the
unit on again.
On the unit’s display
NO READ
≥The disc is dirty or badly scratched.
➜ Clean the disc if it is dirty.
➜ The disc cannot be played if it is scratched and this display doesn’t disappear.
≥The unit cannot read the disc.
50
—
—
50
≥You have used a DVD-RAM/PD lens cleaner and it has finished.
UNSUPPORT
U14
≥You have inserted a disc the unit cannot play or record on.
11
≥The unit is hot.
➜ The unit switches to standby automatically for safety reasons and you cannot operate it.
Wait for about 30 minutes for the service number to disappear.
➜ Select a position with good ventilation when installing the unit.
➜ Do not block the cooling fan on the rear of the unit.
—
—
—
U99
≥The unit fails to operate properly. Press [Í, DVD POWER] to switch the unit to standby. Now
press [Í, DVD POWER] again to turn the unit on.
—
45
—
CHK REMOTE
RECOVER
≥The remote control and main unit are using different codes. Change the code on the remote
control or main unit.
≥There was a power failure or the AC plug was disconnected while the power was on. The unit
is carrying out its recovery process. Wait until the message disappears.
51
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem:
SAMSUNG ELECTRONICS AMERICA,INC. -SERVICE DIVISION 400 Valley Road, Suite 201, Mt Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
Power
No power.
Page
≥Insert the AC power supply cord securely into a known active AC outlet.
5
The unit switches to the
standby mode.
≥This is a power saving feature. You can turn it off if you would prefer (Set Up—Off Timer—
Off). Press [Í, DVD POWER] to turn the unit on.
46
≥One of the unit’s safety devices may have activated. Press [Í, DVD POWER] to turn the unit
on.
—
Operation
The unit is on but cannot be
operated.
≥Some operations may be prohibited by the disc.
—
51
—
≥The unit is hot (“U14” appears on the display). Wait for “U14” to disappear.
≥One of the unit’s safety devices may have activated.
Reset the unit as follows:
1.Press [Í, DVD POWER] to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í, DVD POWER] for about 10 sec-
onds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.
2.Press [Í, DVD POWER] to turn the unit on.
Picture
≥When progressive output is on, refer also to “Progressive video” below.
The images from this unit do
not appear on the television.
≥Make sure that the television is connected to the AUDIO/VIDEO terminal, S-VIDEO OUT ter-
minal or COMPONENT VIDEO OUT terminal on this unit.
5
≥Make sure that the television’s input setting (e.g., VIDEO 1) is correct.
—
—
≥You have set “TV Type” to “4:3 (480P)” or “16:9 (480P)” in the TV Screen menus, but the
television isn’t compatible with progressive signals. Press and hold [∫] and [TIME SLIP] on
the unit at the same time for about 5 seconds. The setting will change to interlace.
Television reception wors-
ens after connecting the unit.
≥This can occur because the signals are being divided between the unit and the television.
It can be solved by using a signal booster, available from audio-visual suppliers. Consult
your dealer if reception does not improve.
—
Screen size is wrong.
≥Check the settings on your television.
—
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for
DVD-RAM” in the TV Screen menu.
10, 47
On-screen messages do not
appear.
≥Go to the Display menu and select “Automatic” for “Status Messages”.
≥Press [STATUS] to show the on-screen messages constantly.
47
39
The blue background does
not appear.
≥Go to the Display menu and select “On” for “Blue Background”.
47
There is ghosting.
≥Turn “MPEG-DNR” off if it is on.
38
—
Play stops for a moment
during Quick View.
≥Play may stop where two play lists join, but this is not a malfunction.
Progressive video
There is ghosting when
progressive output is on.
≥Set “Progressive” to “OFF”. This problem is caused by the editing method or material used
on DVD-Video, but should be corrected if you use interlace output.
38
—
There is no apparent change
in picture quality when
≥The effect is less perceivable with some types of video.
adjusted with the Video menu
in the on-screen menus.
52
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Page
No sound.
Low volume.
Distorted sound.
≥Check the connections. Check the input mode on the amplifier if you have connected one.
5,
41–43
37
≥Turn V.S.S. off if it causes distortion.
Cannot hear the desired
audio type.
≥Press [AUDIO] to select the desired audio type.
23
Cannot switch audio during
stereo or SAP broadcasts.
≥You have used digital connection. Set “Dolby Digital” to “PCM” or connect to other equip-
ment using audio cables (analog connection).
≥You cannot change the audio type when a DVD-R is in the disc tray.
42, 47
—
Play
Play fails to start even when
[1] (PLAY) is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and
MP3 discs.
≥The disc is dirty. Clean it.
≥The disc may be badly scratched.
15
11
50
—
—
—
≥You inserted a blank DVD-RAM or DVD-R.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
A title or chapter doesn’t play
when it is selected.
≥Some titles and chapters on DVD-Video are not played when you have changed the ratings
level.
46
Picture distorted during
search.
≥Some distortion is normal.
—
Alternative soundtrack and
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may have to use the disc’s menus to select languages.
—
17
No subtitles.
≥Subtitles are not recorded on the disc.
—
≥Turn the subtitles on.
36
Angle cannot be changed.
≥This function depends on software availability. Angles can only be changed during scenes
—
where different angles are recorded.
You have forgotten your
ratings password.
≥Return the ratings setting to “8”.
While the disc tray is open, press and hold [:/6] and [5/9] on the main unit at the
same time for 5 or more seconds.
—
Displays
The display is dim.
≥Go to the Display menu and change the display’s brightness with “FL Display”.
47
49
“12:00” is flashing on the
unit’s display.
≥The clock is not set.
The displayed recording time
and actual recording time
differ.
≥Displayed recording time is based on the number of frames per second. This number is
subject to minute variations. When recording over long periods, these variations may result
in the difference between displayed recording time and actual recording time. This is nor-
mal.
—
The display doesn’t show the
≥Times may not appear correctly when searching through tracks recorded with a variable bit
—
correct time. [MP3]
rate.
Remote control
The remote control doesn’t
work.
≥[DVD, TV] is not switched to “DVD”. Switch to “DVD” when operating this unit.
≥The remote control and main unit are using different codes. Change the code on the remote
control or main unit.
12
45
≥The batteries are depleted. Replace them with new ones.
≥Point the remote control at the remote control sensor on the main unit.
≥Remove obstacles from between the remote control and main unit.
6
6
—
Cannot operate the
television.
≥Change manufacturer code. Some televisions cannot be operated even if you change the
code.
≥[DVD, TV] is not switched to “TV”. Switch to “TV” when selecting the receiving channel for
10
12
the television.
53
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Recording and timer recording
Page
11
Cannot record.
≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
≥The disc is unformatted. Format the disc so this unit can record on it.
≥The write-protect tab on the cartridge is set to PROTECT.
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is protected with DISC SETTING.
≥The disc is full or nearly full. Erase unneeded programs or use another disc.
≥You cannot record on finalized DVD-R discs.
34
11
14
34
32
—
VCR Plusr programming
does not work properly.
≥The guide channels are incorrect. Go to the Channel menu and correct them with “VCR
Plusi CH Setting”.
8
≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.
49
Timer recording does not
work properly.
≥The timer program is incorrect. Correct the program.
≥The unit is not on timer recording standby. (“ ” on the unit’s display is not on.) Press [Í,
26
—
DVD POWER] to turn the unit off and make sure that “
” is on.
≥Different timer program times overlap.
—
≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.
49
The unit switches to standby
while making a timer record-
ing.
≥The disc has run out of space. Use a disc that has enough space to record the program.
—
The timer program remains
even after recording finishes.
≥The program remains if you select “DAILY” or “WEEKLY”.
25
—
Timer recording does not
stop even when [∫] is
pressed.
≥Press [∫] and then [ENTER] within 5 seconds to turn “
” off. Recording stops.
The available recording time
doesn’t increase even after
erasing recordings on the
disc.
≥As this unit is unable to erase data written to DVD-RAM with a computer, the available
recording time does not increase. The data will be erased if you reformat the disc.
≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.
34
50
A part or whole of a recorded
program has been lost.
≥If there is a power failure or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable.
➜ We cannot offer any guarantee regarding lost programs or discs. You will have to format
the disc or use a new disc.
34
Discs make sounds as they rotate. This does not indicate a malfunction.
Maintenance
The precision parts in this unit are readily affected by the envi-
ronment, especially temperature, humidity, and dust. Cigarette
smoke also can cause malfunction or breakdown.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it
impossible to record or play discs.
Use every 1 to 4 months, depending on frequency of use and the
operating environment. Read the lens cleaner’s instructions care-
fully before use.
To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Product Service
1. Damage requiring service—The unit should be serviced by
qualified service personnel if:
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to per-
form safety checks to confirm that the unit is in proper working
condition.
(a) The AC power supply cord or AC adaptor has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servic-
ing to authorized servicing personnel.
Product information
For product information or assistance with product operation:
SAMSUNG ELECTRONICS AMERICA, INC. -CONSUMER
ELECTRONICS CUSTOMER SERVICE
400 Valley Road, Suite 201, Mt Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
54
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Recording system:
DVD video recording standards
(DVD-RAM),
DVD video standards (DVD-R)
System with 1 lens, 2 integration
units (662 nm wavelength for DVDs,
790 nm wavelength for CDs)
Audio system
Recording system:
Input:
Dolby Digital (XP/SP/LP/EP)
LINE (pin jack)a3
Optical pick-up:
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 k≠
LINE (pin jack)a1
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 k≠
(Load impedance: 10 k≠)
Recording: 2 channels
Playback: 2 channels
Recordable discs:
12 cm (5
12 cm (5
q
q
) 4.7 GB DVD-RAM discs
) 9.4 GB DVD-RAM discs
Output:
8 cm (3
12 cm (5
8 cm (3 ) 1.4 GB DVD-R discs
q) 2.8 GB DVD-RAM discs
q) 4.7 GB DVD-R discs
q
(for General Ver. 2.0)
Max. 6 hours (using 4.7 GB disc)
XP: 60 minutes
SP: 120 minutes
LP: 240 minutes
EP: 360 minutes
12 cm (5
12 cm (5
Number of channels:
Recording time:
Discs played:
Other input/output connectors:
Digital audio optical output connector
Operating temperature range:
5 oC–40 oC (41 oF–104 oF)
q
q
) 4.7 GB DVD-RAM discs
) 9.4 GB DVD-RAM discs
Operating humidity range:
10 %–80 % RH (no condensation)
Quartz-controlled 12-hour digital dis-
play
8 cm (3
12 cm (5
8 cm (3 ) 1.4 GB DVD-R discs
q) 2.8 GB DVD-RAM discs
Clock unit:
q) 4.7 GB DVD-R discs
q
(for General Ver. 2.0)
DVD-VIDEO discs
CD-Audio discs (CD-DA)
Video CD discs
LASER Specification
Class I LASER Product
Wave length:
775–815 nm 655–666 nm
No hazardous radiation is emitted with
the safety protection
Laser power:
CD-R/CD-RW discs
(CD-DA, Video CD, MP3 formatted
discs)
[MP3]
≥Maximum number of tracks and
groups recognizable: 999 tracks
and 99 groups
Power supply:
Power consumption:
Dimensions:
AC 120 V, 60 Hz
26 W
Approx. 430 (W)k79 (H)k283 (D) mm
[Approx.1615/16q(W) 31/8 113/16q(D)]
k q(H)k
(excluding protrusions)
Approx. 3.7 kg (8.14 lbs)
Mass:
≥Compatible compression rate:
between 32 kbps and 320 kbps
Video system
TV system:
Power consumption in standby mode: approx. 3.2 W
NTSC system, 525 lines, 60 fields
MPEG2 (Hybrid VBR)
LINE (pin jack)a3, 1.0 Vp-p; 75 ≠
Recording system:
Input:
[Note]
Specifications are subject to change without notice.
Mass and dimensions are approximate.
S connectora3
Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75
≠
Output:
LINE (pin jack)a1, 1.0 Vp-p; 75 ≠
S connectora1 Y: 1.0 Vp-p; 75 ≠
C: 0.286 Vp-p; 75
≠
Component video output (480P/480i):
Y: 1.0 Vp-p; 75 ≠
PB: 0.7 Vp-p; 75 ≠
PR: 0.7 Vp-p; 75 ≠
Antenna reception input:
TV Channel: 2ch–69ch, 75 ≠
CATV Channel: 1ch–125ch, 75 ≠
55
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (ONLY FOR U.S.A.)
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.(SAMSUNG) and
delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing
defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts and Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by SAM-
SUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be presented upon request
as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation to and from service center is the
responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be
defective during the limited warranty period specified above. The product must be returned during the warranty period with
transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service,
the purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant unin-
terrupted or error-free operation of the product. All replaced parts and products become the property of SAMSUNG and must
be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, which-
ever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use
of this product and shall not apply to the following, including, but not limited to : damage which occurs in shipment; application
and uses for which this pouduct was not inteded; failures or problems which are caused by products or equipment not supplied
by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electri-
cal line voltage, fluctuations or surges; damage caused by improper or faulty installation; improper connection with any periph-
eral; product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and environmental instruc-
tions that are covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accesso-
ries or equipment which damage this product or result in service problems; failures or problems due to incompatibility with other
equipment.
56
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (ONLY FOR CANADA)
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.
SECA further warrants that if this porduct falls to operate properly within the specified warranty period and the failure is due to
improper workmanship or defective materials, SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center.(The name and address of the location nearest
you can be obtained by calling toll free : 1-800-SAMSUNG)
PARTS
LABOR
One year
One year (Carry-in)
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be
presented to the authorized service center at the time service is requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage,
improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior
finish, lamps, glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual
are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or
altered serial number. This warranty is valid only on products purchased and used in Canada.
HEADQUARTERS
SAMSUNG ELECTRONICS CANADA, INC.
7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 CANADA
FABRIQUE EN CORÉE
TEL: 1-905-542-3837
57
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Instalación básica
Conexiones del televisor y de la antena
Televisor
A la antena
Cable de TV
AUDIO
IN
VIDEO
IN
VHF/UHF
RF IN
R
L
Antena exterior
Antena interior
o
Rojo Blanco Amarillo
Cable de alimentación de CA (incluido)
Conecte por último.
Conecte también los cables de
alimentación de CA para el otro equipo.
Cable de
75 ≠ cable coaxial
(incluido)
Cable de antena
(desconectado
normalmente
desde el
audio/vídeo
(incluido)
A la toma de CA del hogar
(CA 120 V, 60 Hz)
televisor)
Rojo Blanco Amarillo
Ventilador de refrigeración
Este aparato
RF IN
R-AUDIO-L
R-AUDIO-L
VIDEO S-VIDEO
(L1)
Y
P
B
PR
OPTICAL
RF OUT
COMPONENT
VIDEO OUT
(480P/480I)
VHF/UHF
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(L3)
R-AUDIO-L
VIDEO S-VIDEO
VIDEO S-VIDEO
Para disfrutar del vídeo progresivo
≥Conecte a los terminales de entrada de vídeo componente (480P) en un televisor com-
patible con el sistema de protección contra copia del aparato. (El vídeo no se visual-
izará correctamente si está conectado a un televisor incompatible).
≥Ajuste “TV Type” a “4:3 & 480P” o “16:9 & 480P”. (➜página 59, “Instalación para
ajustar su televisor”)
Preparación
≥Confirme que la antena esté conectada correctamente.
≥Encienda el televisor y seleccione en él la entrada de vídeo
apropiada para ajustar las conexiones realizadas al aparato.
Plug-in para Sintonización automática
1 Pulse [Í, DVD POWER] para encender
el aparato.
2 Pulse [3, 4] para seleccionar
“Español” y pulse [ENTER].
3 Pulse [ENTER].
3, 4, 2, 1
ENTER
Se activa el plug-in para la Sintonización automática y el
aparato transforma las emisoras que puede recibir en canales.
4
Cuando el visualizador muestre la hora correcta
Pulse [ENTER] para desactivar el plug-
in para Sintonización automática.
58
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Instalación para ajustar su televisor
Cambie los ajustes si su televisor es:
De pantalla panorámica (relación del ancho a la altura de la
imagen 16:9)
Guía VCR Plusi para ajuste de canales
Ajuste esta guía de canales de manera que pueda utilizar los
códigos i VCR Plus para la grabación con temporizador.
≥
≥Progresivo
1 Pulse [SETUP] para visualizar los
menús.
– Si desea información más detallada, lea el manual de instruc-
ciones de su televisor.
2 Pulse [3, 4] para seleccionar
1 Pulse [SETUP] para visualizar los
menús.
“Canal” y pulse [1].
3 Pulse [3, 4] para seleccionar “VCR
2 Pulse [3, 4] para seleccionar
Plusr Ajuste canal” y pulse [ENTER].
“Pantalla TV” y pulse [1].
4 Pulse [3, 4] para seleccionar la guía
de canales que desea ajustar y pulse
[1].
3 Pulse [3, 4] para seleccionar “Tipo
TV” y pulse [ENTER].
≥Compruebe en las guías de televisión las guías de canales
para las emisoras.
4 Pulse [3, 4] para seleccionar el
≥Al seleccionar la guía de canales, pulse y mantenga
pulsado [3, 4] para desplazar la pantalla hacia arriba y
hacia abajo.
elemento y pulse [ENTER].
Para volver a la pantalla anterior
Pulse [RETURN].
5 Pulse [3, 4] para seleccionar el canal
correspondiente a la guía de canales
y pulse [2].
Cuando haya finalizado
Pulse [SETUP].
Si selecciona el elemento para salida progresiva (480P)
Seleccione Vídeo en el menú en pantalla y ajuste “Transferencia”
de acuerdo con el tipo de material en reproducción durante la
reproducción.
≥Compruebe en las guías de televisión el número de canal
para las emisoras.
≥Para borrar un número, pulse [CANCEL].
≥Repita los pasos 4 y 5 si es necesario.
Durante la reproducción
1. Pulse [DISPLAY].
2. Pulse [3, 4] para seleccionar “Vídeo” y pulse [1].
3. Pulse [3, 4] para seleccionar “Progresiva” y pulse [1] dos
veces.
6 Pulse [ENTER].
Vuelve a aparecer la pantalla del paso 2.
4. Pulse [3, 4] para seleccionar “Transferencia” de acuerdo con
el tipo de material en reproducción.
Para volver a la pantalla anterior
Pulse [RETURN].
Disco
Repr.
Vídeo
Audio
Normal
Cuando haya finalizado
Pulse [SETUP].
Imagen
ACT
Auto 1
DNR
ACT
Transferencia
Progresiva
Auto1 (normal): Para material cinematográfico
Auto2: Para material cinematográfico (igual que Auto1, capaz de
convertir vídeo progresivo de 30 cuadros por segundo).
Vídeo: Para material de vídeo
[Note]
≥Si el aparato está conectado al TV a través de VIDEO OUT o
S-VIDEO OUT, la salida se entrelaza sólo (incluso al seleccionar
la salida progresiva).
≥Cuando la salida progresiva está activada, no se pueden
visualizar encabezamientos cerrados.
59
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Grabación de programas de televisión
[RAM] [DVD-R]
4 3Bandeja del disco
2
1 Pulse [Í, DVD POWER] para
1 5
encender el aparato.
2 Pulse [< OPEN/CLOSE] para abrir la
bandeja
e
introduzca un disco
(➜siguiente página).
≥Vuelva a pulsar el botón para cerrar la bandeja.
≥En un disco de doble cara, no es posible grabar de man-
era continua desde una cara a la otra. Será necesario
expulsar el disco y darle la vuelta.
TIME SLIP
3 Asegúrese de que [DVD, TV] se
encuentre en la posición “DVD” y
pulse [W, X, CH] para seleccionar el
canal.
por ejemplo., al
seleccionar el
canal 4
Botones
numerados
4 Pulse [REC MODE] para seleccionar
el modo de grabación (➜siguiente
página).
por ejemplo., al
seleccionar
“XP”
5 Pulse [¥, REC] para iniciar la
grabación.
Para su referencia
Para detener la grabación
≥Puede grabar hasta 99 programas en un disco.
≥Este aparato es compatible con el sistema Content Protection
for Recordable Media (CPRM) de manera que se pueden
grabar emisiones que permitan realizar una copia, como algunas
emisiones CATV, en 4.7 GB/9.4 GB DVD-RAM (éstas son
compatibles con CPRM). No es posible grabar en DVD-R ni 2.8
GB DVD-RAM.
Pulse [∫].
Para hacer una pausa en la grabación
Pulse [;]. Vuelva a pulsar para reanudar la grabación.
Apagado automático
El aparato pasa al modo en espera después de aproximadamente
6 horas en el modo de parada. Puede desactivar esta función o
cambiar el tiempo a 2 horas en el Temporizador de desconexión
del Menú de instalación.
≥La grabación se realizará en el espacio libre del disco. Los datos
no se sobrescribirán.
[Note]
≥Durante la grabación no se pueden cambiar ni el canal ni el
modo de grabación.
≥Suelte la protección durante la grabación. [RAM]
≥Al utilizar un soporte DVD-RAM por primera vez con este aparato,
formatéelo y asegúrese de que la grabación sea precisa.
≥En la grabación en DVD-R hay limitaciones.
≥Durante la grabación de sonido MTS en DVD-R, únicamente se
puede grabar o el canal principal o el subcanal. Seleccione en
“Select MTS” del Menú de audio.
Si se aflojase accidentalmente el cable de
alimentación de CA
o
si se interrumpiese la
alimentación por alguna otra razón durante la
grabación o edición, podría perderse el contenido
del disco.
60
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducción de discos
Reproducción durante la grabación
[RAM] [DVD-R]
[RAM]
Puede introducir un disco con o sin estuche.
Reproducción desde el inicio del programa que
está grabando—Reproducción encadenada
Disco sin estuche
Introduzca la etiqueta
mirando hacia arriba.
Introduzca dentro
de las guías de la
bandeja.
Pulse [1] (PLAY).
La reproducción se inicia desde el principio del programa que se
está grabando. (Se enciende el indicador Time Slip).
Disco con
estuche
Grabación y reproducción simultáneas
Puede reproducir un programa grabado previamente.
Introduzca la etiqueta mirando hacia arriba y
con la fecha hacia el interior.
1
Durante la grabación
Pulse [DIRECT NAVIGATOR].
Se enciende el indicador Time Slip.
[Note]
≥Cargue discos de doble cara de manera que la etiqueta de la
cara que desee grabar/reproducir quede mirando hacia arriba.
≥Al utilizar DVD-RAM de 8 cm (3″), retire el disco del estuche e
introdúzcalo, asegurándose de que quede alineado con la
ranura.
2 Pulse [3, 4] para seleccionar un
programa y pulse [ENTER].
Revisión de imágenes grabadas durante la repro-
ducción—Time Slip
Modos de grabación y tiempo de
grabación aproximado en horas
Puede reproducir el programa que se está grabando para
comprobar que se está grabando correctamente. También puede
comprobar las partes que se han grabado previamente.
Disco
DVD-RAM
DVD-R
(4.7 GB)
De una sola
De doble
cara
Modo
cara
1 Pulse [TIME SLIP].
(4.7 GB)
(9.4 GB)
Se enciende el indicador Time Slip.
La reproducción se inicia a partir de los 30 segundos
anteriores. Las imágenes que se están grabando en ese
momento se muestran como imágenes dentro de imágenes
y podrá escuchar el audio de reproducción.
XP (Alta calidad)
SP (Normal)
1
2
2
4
1
2
LP (Disco de larga
duración)
4
6
8
4
6
2 Pulse [3, 4] para introducir la hora y
EP (Disco de extra
larga duración)
12
pulse [ENTER].
≥Pulse [TIME SLIP] para mostrar las imágenes de reproduc-
ción enteras. Vuelva a pulsar para mostrar las imágenes de
reproducción y grabación.
Visualización del televisor durante la
grabación
Para detener la reproducción y la grabación
[RAM] [DVD-R]
1 Pulse [∫]. (La reproducción se detiene).
Las imágenes siendo grabadas no se ven afectadas.
Interruptor [DVD, TV] a “TV”.
1 Pulse [TV/VIDEO] para cambiar el modo de entrada del
televisor a “TV”.
Espere 2 segundos.
2 Pulse [∫]. (La grabación se detiene).
≥Para detener la grabación con temporizador, pulse [∫],
después [ENTER] en un transcurso de 5 segundos.
2 Pulse [W, X, CH] para cambiar canales.
≥También puede seleccionar el canal con los botones
numerados.
por ejemplo.,“5”:
[0] ➜[5]
“15”: [1] ➜[5]
“115”: [100] ➜ [1] ➜ [5]
61
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Reproducción de discos
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
Bandeja del disco
2
:/22,11
/
9
1
1 Pulse [Í, DVD POWER] para
encender el aparato.
2 Pulse [< OPEN/CLOSE] para abrir la
bandeja e introducir un disco (➜
página 61).
≥Vuelva a pulsar el botón para cerrar la bandeja.
≥Si está activada la protección del estuche, pulsando [<
OPEN/CLOSE] se iniciará automáticamente la reproduc-
ción. [RAM]
3
ERASE
≥En un disco de doble cara, no es posible reproducir de
manera continua desde una cara a la otra. Será necesario
expulsar el disco y darle la vuelta.
3 Pulse [1] (PLAY).
El aparato tarda algún tiempo en leer el
disco antes de iniciar la reproducción.
(Cuando aparece una pantalla de menús
en el televisor ➜ siguiente página)
Botones
numerados
≥Si la función de reanudación (➜ más abajo, Para detener
la reproducción) no está activa, la reproducción se iniciará
desde el programa grabado más recientemente.
Para detener la reproducción
Pulse [∫].
[Note]
≥Si se carga un disco, se pondrá en marcha el aparato y se
≥Cuando “PLAY” parpadea en el visualizador, se
está activando la función de reanudación. Pulse
[1] (PLAY) para iniciar la reproducción desde la
posición en que la detuvo.
Para cancelar la función, pulse [∫] hasta que se
apague “PLAY” (también se cancela la posición al apagar el
aparato o abrir la bandeja del disco).
≥Al detener la reproducción puede que
aparezca el salvapantallas en el lado
derecho. Vuelva a pulsar [∫] y podrá
utilizar el sintonizador del aparato para
ver el televisor.
iniciará la reproducción al pulsar [1] (PLAY).
≥Al reproducir un disco con una sola pista de audio, puede que se
siga mostrando el vídeo del disco anterior en el televisor.
≥Los niveles reales de sonido para DVD de Vídeo son inferiores en
relación a la emisión de televisión o a la reproducción de otros
discos. Para evitar una subida repentina del volumen al conectar
desde DVD de Vídeo, reduzca el ajuste de volumen antes de
reproducir otras fuentes o conectar la emisión de televisión.
Para hacer una pausa en la
reproducción
Pulse [;]. (Vuelva a pulsar para reanudar la reproducción).
Apagado automático
El aparato pasa al modo en espera después de aproximadamente
6 horas en el modo de parada. Puede desactivar esta función o
cambiar el tiempo a 2 horas en el Temporizador de desconexión
del Menú de instalación.
62
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Cuando aparece una pantalla de menús
en el televisor
Utilización del Navegador directo
[RAM] [DVD-R]
Al grabar una serie de programas, se crea un lista. Puede utilizar
esta lista para encontrar programas para su visualización.
[VCD]
Interruptor [DVD, TV] a “DVD” y
Pulse los botones numerados (0, 1j9) para seleccionar
un elemento.
por ejemplo., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
1 Pulse [DIRECT NAVIGATOR].
El programa resaltado se
reproduce de fondo.
DIRECT NAVIGATOR
[DVD-V]
o
N
POS FECHA
HORA
TíTULO
EDITAR
1
3
01
02
03
4
6
13
10
9
11
:
:
:
00 AM Dinosaur
00 PM
00 PM USJ
6/20 MIÉ
6/20 MIÉ
6/20 MIÉ
Pulse [3, 4, 2, 1] para seleccionar un elemento y
pulse [ENTER].
≥Puede que también sea posible utilizar los botones numerados
1
Auto action
2
Pulse [
3
,
4]
1
1
3
para seleccionar
el programa y
pulse [ENTER].
1
o
SELECT
ENTER
TOTAL 3
N
(0, 1j9) para seleccionar un elemento.
0
~
9
RETURN
Otros botones utilizados para activar menús
Si desea más información sobre el funcionamiento, lea las
instrucciones de los discos.
[9][11 9]: Muestra el siguiente menú.
[:][:/22 ]: Muestra el menú anterior.
[RETURN]: Muestra la pantalla de menús. [VCD]
[TOP MENU]: Muestra la primera pantalla de menús. [DVD-V]
[MENU]: Muestra la pantalla de menús. [DVD-V]
≥También puede seleccionar programas con los botones
numerados.
/
por ejemplo., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
La reproducción de las imágenes que se estaba
reproduciendo de fondo continúa.
Para detener la reproducción
[Note]
Pulse [∫].
≥Los discos siguen girando mientras se muestran los menús.
Pulse [∫] una vez finalizada la visualización para mantener en
buen estado el motor del aparato y la pantalla del televisor.
Para cancelar la lista de programas
Pulse [DIRECT NAVIGATOR].
≥Si aparece “
” en el televisor, la unidad o disco impiden el
funcionamiento.
≥Las funciones disponibles varían de un disco a otro.
Sobre la lista de programas
Protección contra escritura
Se visualiza cuando se ha protegido
el programa.
Memoria de posición
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
Después de apagar el aparato, puede iniciar la reproducción desde
una posición memorizada.
o
N
POS FE
Protección contra copia
Se visualiza cuando se ha grabado
un programa que dispone de
3
01
02
03
04
05
4
6/20
6/20
6/20
6/21
6/22
6
(Cuando se muestra el tiempo de reproducción transcurrido).
protección
emisiones CATV, por ejemplo.
Incapaz de reproducir
Se visualiza si no es posible reproducir
el programa.
Grabación en proceso
Se visualiza cuando el programa se está
reproduciendo.
contra
copia,
de
13
2
X
1
2
Durante la reproducción
3
¥
8
Pulse [POSITION MEMORY].
El mensaje “Posicion Memorizada” aparece en el televisor.
TOTAL 5
N
0
~
Después de pasar el aparato a la posición de modo en
espera y de volver a ponerlo en funcionamiento
Pulse [1] (PLAY).
La reproducción se inicia desde la posición memorizada.
(La posición se cancela).
Para borrar un programa que se está
reproduciendo
[Note]
[DVD-R] [DVD-V] [VCD] [CD] [MP3]
≥La posición se cancela al abrir la bandeja del disco.
[RAM]
≥Los posiciones siguen estando memorizadas incluso tras haber
abierto la bandeja del disco.
Ya que el programa borrado con este procedimiento no se
puede recuperar, debería asegurarse de que desea
borrarlo antes de realizar la operación.
≥Si el disco está protegido contra escritura, no se pueden marcar
posiciones.
1 Pulse [ERASE].
Se visualizará una pantalla de confirmación.
2 Pulse [2] para seleccionar “Borrar” y
Para su referencia
Si pulsa [∫] antes de pasar el aparato a la posición de modo en
espera después de pulsar [POSITION MEMORY] para memorizar
una posición, se reanudará la reproducción desde la posición
pulsada [∫] al pulsar [1] (PLAY).
pulse [ENTER].
≥En el aparato principal, pulse [82/6] y [ERASE].
[Note]
≥No es posible borrar el programa al realizar una grabación y
reproducción simultáneas (➜página 61). [RAM]
≥La cantidad de espacio que queda en el disco no aumenta
incluso al borrar programas. [DVD-R]
63
DVD-R4000
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Angle . . . . . . . . . . . . . . . . . . . . . . . . 36
Antenna system . . . . . . . . . . . . . . . . 7
Audio attribute . . . . . . . . . . . . . . . . 36
Ratings password . . . . . . . . . . . . . 46
Recording mode . . . . . . . . . . . . . . . 15
Re-initialize setting. . . . . . . . . . . . . 46
Repeat play . . . . . . . . . . . . . . . . . . . 37
Resume function . . . . . . . . . . . . . . 16
Finalize . . . . . . . . . . . . . . . . . . . . . . 34
Flexible Recording (FR) . . . . . 15, 23
Format DVD-RAM. . . . . . . . . . . . . . 34
FUNCTIONS menu . . . . . . . . . . . . . 23
Channel caption . . . . . . . . . . . . . . . . 9
Channel setting . . . . . . . . . . . . . . . . 9
Chasing play . . . . . . . . . . . . . . . . . . 22
Cleaning
disc . . . . . . . . . . . . . . . . . . . . . . . . . 50
lens . . . . . . . . . . . . . . . . . . . . . . . . . 54
main unit . . . . . . . . . . . . . . . . . . . . . 54
Clock setting . . . . . . . . . . . . . . . . . . 49
CM Skip . . . . . . . . . . . . . . . . . . . . . . 18
Connection
amplifier, system component . . . . . . 42
antenna . . . . . . . . . . . . . . . . . . . . . . 44
antenna, television . . . . . . . . . . . . . . . 5
cable TV box, satellite receiver . . . . 41
video equipment . . . . . . . . . . . . . . . 43
CPRM system . . . . . . . . . . . . . . . . . 50
Language code list . . . . . . . . . . . . 48
Marker . . . . . . . . . . . . . . . . . . . . . . 20
MPEG-DNR . . . . . . . . . . . . . . . . . . 38
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 21
On-screen display . . . . . . . . . . . . . 39
On-screen menu. . . . . . . . . . . . . . . 36
SETUP menu. . . . . . . . . . . . . . . . . . 48
Shorten Segment . . . . . . . . . . . . . . 32
Simultaneous rec and play . . . . . . 22
Sound track. . . . . . . . . . . . . . . . . . . 36
Subtitle . . . . . . . . . . . . . . . . . . . . . . 36
Time Slip . . . . . . . . . . . . . . . . . . 19, 22
Timer recording . . . . . . . . . . . . 24–26
Transfer . . . . . . . . . . . . . . . . . . . . . 38
TV Type . . . . . . . . . . . . . . . . . . . . . . 10
PCM Down Conversion . . . . . . . . . 47
Picture . . . . . . . . . . . . . . . . . . . . . . 38
PLAY FROM TOP . . . . . . . . . . . . . . 23
Play list . . . . . . . . . . . . . . . . . . . 28, 30
Position memory . . . . . . . . . . . . . . 17
Progressive . . . . . . . . . . 5, 10, 38, 50
Properties
play list . . . . . . . . . . . . . . . . . . . . . . . 30
program . . . . . . . . . . . . . . . . . . . . . . 32
Protection
VCR Plusi
guide channel . . . . . . . . . . . . . . . . . . 8
timer recording . . . . . . . . . . . . . . . . . 24
V.S.S. . . . . . . . . . . . . . . . . . . . . . . . . 37
Dialog Enhancer . . . . . . . . . . . . . . . 37
Direct Navigator . . . . . . . . . . . . . . . 17
Divide Program . . . . . . . . . . . . . . . . 32
cartridge . . . . . . . . . . . . . . . . . . . . . . 11
disc . . . . . . . . . . . . . . . . . . . . . . . . . . 34
program . . . . . . . . . . . . . . . . . . . . . . 32
Edit Scenes . . . . . . . . . . . . . . . . . . . 30
Enter title
disc. . . . . . . . . . . . . . . . . . . . . . . . . . 34
play list . . . . . . . . . . . . . . . . . . . . . . . 30
program . . . . . . . . . . . . . . . . . . . 24, 32
Erase
all program . . . . . . . . . . . . . . . . . . . 34
play list . . . . . . . . . . . . . . . . . . . . 29, 30
play list scene . . . . . . . . . . . . . . 29, 31
program . . . . . . . . . . . . . . . . . . . 17, 32
Índice
Reproducción encadenada . . . . . . 61
Conexión
Modo de grabación. . . . . . . . . . . . . 61
Función de reanudación . . . . . . . . 62
antena, televisor . . . . . . . . . . . . . . . 58
Grabación y reproducción
Navegador directo . . . . . . . . . . . . . 63
simultáneas. . . . . . . . . . . . . . . . . . . 61
Borrar
Time Slip . . . . . . . . . . . . . . . . . . . . . 61
Tipo TV. . . . . . . . . . . . . . . . . . . . . . . 59
programa . . . . . . . . . . . . . . . . . . . . . 63
Memoria de posición . . . . . . . . . . . 63
Progresivo . . . . . . . . . . . . . . . . . . . 58
VCR Plusi
guía de canales . . . . . . . . . . . . . . . 59
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Cor-
poration. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
|