DVD-C350
DVD-C350K
DVD-C450K
DVD Player
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
AK68-01919A
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
- Discs which cannot be played with this
claims of certain U.S. patents and other intel-
lectual property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
auzthorized by Macrovision Corporation, and
is intended for home and other limited view-
ing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Descriptions
player.
Front Panel Controls
•
•
•
•
DVD-ROM
CD-ROM
CDI
• DVD-RAM
• CDV
• CVD
DVD-C450K
1
3
4
7
6
5
9
8
2
CDGs play audio only, not graphics.
- Ability to play back may depend on
recording conditions.
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
•
•
•
DVD-R, +R
CD-RW
DVD+RW, -RW (V mode)
PROGRESSIVE SCAN OUTPUTS
(480p)
“CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE, IN CASE
OF 576 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING YOUR
TV SET COMPATIBILITY WITH THIS MODEL
576p DVD PLAYER, PLEASE CONTACT
SAMSUNG'S CUSTOMER SERVICE CENTER.”
- The unit may not play certain CD-R, CD-
RW and DVD-R due to the disc type or
recording conditions.
DVD-C350K
1
5
6
3
2
8
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your DVD player directly to your TV,
not to a VCR. Connecting to a VCR results in
a distorted picture from copy-protected DVD
discs.
▼
▼
▼
▼
▼
▼
This product incorporates copyright protec-
tion technology that is protected by methods
DVD-C350
5
6
3
2
1
▼
▼
▼
Disc Markings
▼
▼
Region Number
~
Play Region Number
Both the DVD player and the discs are coded
by region. These regional codes must match in
order for the disc to play. If the codes do not
match, the disc will not play.
NTSC broadcast system in U.S.A,
Canada, Korea, Japan etc.
NTSC
1. DISC TRAY
Place the disc here.
2. DISPLAY
7. USB HOST
(Only DVD-C450K)
The Region Number for this player is described
on the rear panel of the player.
Dolby Digital disc
Connect digital still camera, MP3 player, mem-
ory stick, Card reader, or another removable
storage devices.
Operation indicators are displayed here.
DivX Certification
Stereo disc
STEREO
3. OPEN/CLOSE/STOP (
)
DivX, DivX Certified, and
8. MIC 1/2
associated logos are trade-
marks of DivXNetworks, Inc
and are used under license.
DivX Certified to play DivX video.
Press to open and close the disc tray
DIGITAL
SOUND
Digital Audio disc
(Only DVD-C450K,C350K)
Connect Microphone for karaoke functions.
9. MICROPHONE VOLUME
(Only DVD-C450K)
4. STOP
(■)
(Only DVD-C450K)
Stop disc play.
DTS disc
5. PLAY/PAUSE
(
)
Play or pause the disc / Stops Disc Play
6. POWER ON/OFF ( )
Turn On/Off the DVD Player
MP3 disc
Use to adjust microphone volume level. Use the
button by pressing it. Turn it to the left or right to
control the volume.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
connections
1. DVD POWER Button
Turns the power on or off.
2. REPEAT Button
Use this button to access vari-
ous audio functions on a disc.
11. INFO Button
Displays the current disc mode.
12. OPEN/CLOSE ( ) Button
To open and close the disc tray.
13. REPEAT A-B Button
Allows you to repeat A-B disc.
14. USB Button
Choosing a Connection
DVD-C450K
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
Brings up the Disc menu.
4. BOOKMARK
Before Connecting the DVD Player
-
Always turn off the DVD player, TV, and other components before you connect or disconnect
any cables.
12
13
1
2
Quickly find bookmark sections
of a DVD.
5. SEARCH Buttons (
-
Refer to the user’s manual of the additional components you are connecting for more informa-
tion on those particular components.
14
15
3
4
15. VIDEO SEL. Button
Selects video output formats.
5
6
/
)
16
A. Connecting to a TV (VIDEO CVBS)
Allow you to search forward/
backward through a disc.
6. STOP Button (
7. SKIP Buttons (
Use to skip the title, chapter
or track
16. PLAY/PAUSE Button (
Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
)
7
17
18
-
Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals
on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
Turn on the DVD player and TV.
Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
8
)
9
/
)
-
-
10
19
20
21
Returns to a previous menu.
19. TITLE MENU Button (®)
Brings up the Title menu.
20. KARAOKE Button († )
Use to begin Karaoke func-
tions.
21. CANCEL Button
Use to remove menus or status
displays from the screen.
11
8. MENU Button
Brings up the DVD player’s
menu.
9. ENTER /π/†,√/® Buttons
This button functions as a
toggle switch.
Note
-
Noise may be generated if the audio cable is too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
The number and position of terminals can vary depending on your TV set.
Please refer to the user's manual of the TV.
-
-
10. AUDIO Button (√)
-
-
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) termi-
nal of the DVD player.
If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the
Video Output mode changes in the following sequence : (I-SCAN ➝ P-SCAN ).
1. DVD POWER Button
Turns the power on or off.
2. REPEAT Button
11. OPEN/CLOSE ( ) Button
To open and close the disc tray.
12. REPEAT A-B Button
Allows you to repeat A-B disc.
13. ZOOM Button
Enlarges the DVD Picture.
14. VIDEO SEL. Button
Selects video output formats.
DVD-C350K
DVD-C350
Allows you to repeat play a title,
chapter, track, or disc.
3. DISC MENU Button
Brings up the Disc menu.
4. BOOKMARK
Quickly find bookmark sections of
a DVD.
5. STOP Button (
B. Connection to an Audio System (2 Channel Amplifier, Dolby
Digital,MPEG2 or DTS Amplifier)
-
Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of the Amplifier.
If Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player
to the VIDEO terminal of your TV, If using a coaxial cable, connect the DIGITAL AUDIO OUT
(COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-
nal of the Amplifier.
1
2
11
12
13
-
15. SEARCH Buttons (
/
)
3
4
Allow you to search forward/
backward through a disc.
14
15
)
5
6
16
6. SKIP Buttons (
/
)
16. PLAY/PAUSE Button (
Begin/Pause disc play.
17. SUBTITLE Button (π)
18. RETURN Button
)
-
-
Turn on the DVD player, TV, and Amplifier.
Press the input select button of the Amplifier to select external input in order to hear sound
Use to skip the title, chapter or
track
17
18
7
from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's audio input.
7. MENU Button
Brings up the DVD player’s
menu.
8. ENTER/π/†,√/® Buttons
This button functions as a
toggle switch.
8
9
Returns to a previous menu.
19. TITLE MENU Button (®)
Brings up the Title menu.
20. CANCEL Button
Use to remove menus or sta
tus displays from the screen.
21. KARAOKE Button (†)
(Only DVD-C350K)
19
C. Connections to a TV Interlace / Progressive
10
20
21
- Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of
the DVD player to the COMPONENT IN terminal of TV.
- If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the
DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Component signal from the DVD
player appears on the TV screen.
9. AUDIO Button (√)
Use this button to access various
audio functions on a disc.
10. INFO Button
Displays the current disc
mode.
Use to begin Karaoke func
tions.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO
SEL. button to change the Video Output mode.
basic functions
Playing a Disc
Note
-
What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the inter-
lace output method has. Progressive scanning method can provide better and clearer picture
quality.
Before Play
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes
up: If you want to select a language, press a π/† button then press ENTER (This screen will only
appear when you plug in the player for the first time.) If the language for the startup screen is not
set, the settings may change whenever you turn the power on or off. Therefore, make sure that
you select the language you want to use. Once you select a menu language, you can change it by
2-Channel stereo ampilfier,
Dolby digital or
RED
WHITE
DTS amplifier
pressing the
■
/
button on the front panel of the unit for more than 5 seconds with no disc in
COAXIAL CABLE
BLUE
B
AUDIO CABLE
the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
GREEN
WHITE
WHITE
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump
to the next selection.
Searching through a Chapter or Track
RED
RED
RED
YELLOW
During play, press the SEARCH (
or
) button on the remote control for more than 1 second.
VIDEO CABLE
A
AUDIO CABLE
Note
COMPONENT CABLE
DVD
VCD
CD
ꢀX, 4X, 64X, 1ꢀ8X
4X, 8X
C
- The speed marked in this function may be different from the
actual playback speed.
- No sound is heard during search mode (Except CD).
YELLOW
WHITE
RED BLUE GREEN
RED
ꢀX, 4X, 8X
Skipping Tracks
During play, press the SKIP (
or
) button.
- When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to
the beginning of the previous chapter.
-
When playing a VCD or a CD, if you press the SKIP ( ) button, it moves to the next track. If
you press the SKIP ( ) button, it moves to the beginning of the track. One more press makes it
move to the beginning of the previous track.
- If a track exceeds 15 minutes when playing a VCD and you press the
button, it moves for-
button, it moves backward 5 minutes.
ward 5 minutes. If you press the
Using the Display Function
When Playing a DVD/VCD/MPEG4
1. During play, press the INFO button on the remote control.
ꢀ. Press the π/† buttons to select the desired item.
- When playing VCD, the Disc Menu may notwork.
3. Press the √/® buttons to make the desired setup and then press the ENTER button
4. To make the screen disappear, press the INFO button again.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Play
To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a DVD, each movie will be identified.
This feature allows you to repeat scenes slowly containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD/VCD
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
1. During play, press the PLAY/PAUSE ( ) button.
ꢀ. Press the SEARCH ( ) button to choose the play speed between 1/ꢀ, 1/4, 1/8 and 1/16 of
normal during PAUSE.
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some disc.
Refers to the subtitle languages available in the disc. You will be able to choose the subtitle
languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 3ꢀ differ-
ent subtitles.
advanced functions
Adjusting the Aspect Ratio (EZ View)
Enter and press the √/® buttons to access the desired Audio, Angle, Bookmark, EZ View
function and Zoom.
To play back using aspect ratio (DVD)
Refers to the language of the film soundtrack. In the example, the soundtrack is played in
English 5.1CH. A DVD disc can have up to eight different soundtracks. Some DVD discs are
have more angle function from any picture.
Bookmark function make you easily and quickly to find a track or chapter from DVD or CD.
The EZ View function is use for changing the aspect ratio in DVD.
The ZOOM function is use for Enlarge DVD Picture
1. During play, press the INFO button on the remote control.
ꢀ. Press the π/† buttons to select Shortcut, then press the ENTER button.
3. Press the √/® buttons to select EZ View, then press the ENTER button.
- Each time you press the √/® button, the screen size changes. For graphics of the screen sizes
and the sequence in which the sizes change, see the next column.
If you are using a 16:9 TV
If you are using a 4:3 TV
Using the Disc and Title Menu
For 16:9 aspect ratio discs
- NORMAL WIDE
- SCREEN FIT
- ZOOM FIT
- VERTICAL FIT
For 16:9 aspect ratio discs
- 4:3 Letter Box
- 4:3 Pan Scan
- SCREEN FIT
- ZOOM FIT
During stop mode of a DVD disc, press the Disc Menu/Title menu button on the remote control.
Note
- The Disc Menu or Title Menu may not work. Depending on the disc.
- You can also use the Disc Menu, using the DISC MENU button on the remote control.
- Title Menu will only be displayed if there are at least two titles in the disc.
For 4:3 aspect ratio discs
- NORMAL SCREEN
- SCREEN FIT
For 4:3 aspect ratio discs
-
-
-
NORMAL SCREEN
SCREEN FIT
ZOOM FIT
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD
- ZOOM FIT
Note
Press the REPEAT buttons to select Chapter, Title, Track, Disc or Repeat : Off
- DVD repeats play by chapter or title, VCD repeat play by disc or track.
- Chapter : repeats the chapter that is playing.
- Title : repeats the title that is playing.
This function may behave differently depending on the type of disc.
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
- Disc : repeats the disc that is playing.
- Repeat : Off
- Track : repeats the track that is playing.
Using the AUDIO/√ button (DVD/VCD/MPEG4)
1. Press the AUDIO
audio languages are represented by abbreviations.
Press the Audio button on the remote control repeatedly to select the desired audio on
/√
button. The Audio changes when thebutton is pressed repeatedly.The
Using the A-B Repeat function
1. Press the REPEAT A-B button on the remote control at the point where you want repeat play to
start (A).
/√
MPEG4 then press the ENTER.
ꢀ. Press the REPEAT A-B button on the remote control at the point where you want the repeat play
to stop (B).
3. To return to normal play, press the REPEAT A-B then press the ENTER button until the display
shows Repeat : Off.
Note
-
-
This function depends on audio languages are encoded on the disc and may not work.
A DVD disc can contain up to 8 audio languages.
Note
- A-B REPEAT does not allow you to set point (B) directly after point (A) has been set.
- Depending on the disc, the Repeat function maynot work.
- When playing VCD, the Disc Menu may not work.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE (π) button.
Clearing a Bookmark
1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function”.
4. Press the √/® buttons to select the bookmark number you want to delete.
5. Press the CANCEL button to delete a bookmark number.
Using the SUBTITLE /
π
button (DVD/MPEG4)
1. Press the SUBTITLE (π) button. The subtitle languages are represented by abbreviations. The
subtitle changes when the button is pressed repeatedly
Using the Zoom Function
Press SUBTITLE (π) button at remocon repeatedly to select the desired subtitle language on a
MPEG4 then press the ENTER.
ꢀ. To remove the SUBTITLE icon, press the SUBTITLE (π) button.
Using the Zoom Function DVD/VCD (DVD-C350K,C350)
1. During play, press the ZOOM button on the remote control.
Using the Zoom Function DVD/VCD (DVD-C450K)
1. During play, press the INFO button on the remote control.
Note
ꢀ. Press the π/† buttons to select Shortcut, then press the ENTER button.
3. Press the √/® buttons to select Zoom, then press the ENTER button.
- During DVD/VCD play, press ENTER to zoom in ꢀX/3X/4X/ Normal in order.
- You have to change the desired subtitle in the Disc Menu, according to discs. Press the DISC
MENU button.
- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.
Clips Menu for MP3/WMA/JPEG/MPEG/CD Audio
-
A
DVD disc can contain up to 3ꢀ subtitle languages.
CD Audio or discs with MP3/WMA/JPEG contain individual songs and/or pictures that can be orga-
Changing the Camera Angle
nized into folders as shown below. They are similar to how you use
001/004
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
Off
your computer to put files into different folders.
Using the ANGLE button (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
Open the disc tray. Place the disc on the tray. Close the tray. The
tray closes and this screen display.
1. During play, press the INFO button on the remote control.
ꢀ. Press the π/† buttons to select Shortcut, then press the ENTER button.
3. Press the √/® buttons to select Angle, then press the ENTER button.
4. Press the √/® buttons on the remote control to select the desired angle.
Folder Selections
The folder can be selected in Stop or Play mode.
Note
-
To select the Parent Folder
-
If the disc has only one angle, this feature won’t work. Currently, very few discs have this
Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and
press ENTER to go to the parent folder.
feature.
-
Depending on the disc, these functions may not work.
MP3/WMA/CD Audio Playback
Using the Bookmark Function
1. Open the disc tray. Place the disc on the tray. Close the tray.
- Only one kind of file is played back when a disc or a folder contains both MP3 and WMA files.
ꢀ. Press the π/† buttons to select a song file.
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
Using the Bookmark Function DVD/VCD
- Press ENTER to begin playback of the song file.
1. During play, press the INFO button on the remote control.
ꢀ. Press the π/† buttons to select Shortcut, then press the ENTER button
3. Press the √/® buttons to select Bookmark then press the ENTER button.
4. When you reach the scene you want to mark, press-the ENTER button. Up to 1ꢀ scenes may be
marked at a time.
Repeat/Random playback
Press the REPEAT button to change the playback mode. There are four modes, such as Off,
Track, Folder and Random.
- Off : Normal Playback
- Track : Repeats the current song file.
- Folder : Repeats the song files which have the same extension in the current folder.
- Random : Song files which have the same extension will be played in random order.
To resume normal play, press the CANCEL button.
Note
-
-
Depending on a disc, the Bookmark function may not work.
When playing VCD, the Disc Menu may not work.
CD-R MP3/WMA file
When you record MP3 or WMA files on CD-R, please refer to the following.
- Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and
Windows, and with Apple's Mac.This format is the most widely used.
Recalling a Marked Scene
1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function”.
4. Press the √/® buttons to select the bookmark marked scene.
5. Press the PLAY/PAUSE (
) button to skip to the marked scene.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MPEG4 Playback
- When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma”
as the file extension.
General name format : Title.mp3. or Title.wma. When composing your title, make sure that you
use 8 characters or less, have no spaces in the name, and avoid the use of special characters
including: (.,/,\,=,+).
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” exten-
sions can be played.
1. Open the disc tray. Place the disc on the tray. Close the tray.
ꢀ. Press the π/† buttons to select an avi file (DivX/XviD) and then press ENTER button.
- Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/ decompression you
choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion
to MP3 format, of at least 1ꢀ8 Kbps and up to 160 Kbps. However, choosing higher rates, like
Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates
below 1ꢀ8 Kbps will not be played properly.
Repeat playback
Press the REPEAT button to change playback mode. There are 3 modes, such as Track, Folder and Off.
- Track : repeats the track that is playing.
- Folder : repeats the AVI files which have the same extension in the current folder.
- Off
- Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to Kbps. Conversely, files with decompression rates
below 64Kbps or over Kbps will not be played properly.
MPEG4 Function Description
Function
Description
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to prevent illegal copying. These files
are of the following types: Windows Media (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
Skip
or
During play, press the
or
button, it moves forward or backward 5 minutes.
(
(
)
)
Search
or
During play, press the SEARCH
speed. Allows you to search at a faster speed in an AVI file. (ꢀX, 4X, 8X)
(
or
) button and press again to search at a faster
- Important:
The above recommendations cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality. You should note that certain technologies and
methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability of the player to read the files).
- This unit can play a maximum of 500 files and 500 folders per disc.
Slow Motion
Play
Allows you to search at a slower speed in an AVI file. (1/ꢀX, 1/4X, 1/8X, 1/16X)
- These functions may not work depending on MPEG4 file.
CD-R AVI file
This unit can play the following video compression formats within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG-4 Simple Profile)
- DivX 5 contents (MPEG-4 simple profile plus additional features such as bi-directional frames.
Qpel and GMC are also supported.)
- XviD MPEG-4 compliant Contents.
This unit supports all resolutions up to maximum below.
DivX5
720 x 480 @30fps
720 x 576 @25fps
: Maximum bit rate :4Mbps
Note
• Some MPEG-4 files created on a personal computer may not be play back. That is why Codec
Type, Version and Higher resolution over specification is not supported.
• This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Some MP3 players, when connected to this product,may not operate depending on the sector
size of their file system.
• The USB HOST function is not supported if a product that transfers media files by its
manufacturer-specific program is connected.
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices.
Playing Media File Using the USB Host feature
(Only DVD-C450K)
You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB
memory or digital camera in high audio by connecting the storage device to the USB port of the
DVD Player.
Using the USB HOST feature
1. Connect the USB device to the USB port on the front of the unit.
CD Ripping (Only DVD-C450K)
ꢀ. Press the π/† buttons to select a file in USB. Press ENTER to Open file.
This feature lets you to copy audio files from disc to USB device into MP3 format.
Note
1. Open the dics tray. Place the Audio CD(CD DA) disc on the tray, and close the tray.
Connect the USB device to the USB port on the front of the unit.This screen will be displayed.
Press ENTER to select disc.
•
Each time the USB button on theremote control is pressed, a frame of the USB device
selection will appear.
ꢀ. Press the RETURN button to display the ripping screen.
3. Press the π/† buttons, then press the ENTER button to select files for ripping.
- To deselect files, press ENTER button again.
4. Press the ® and † button to select START, then press the ENTER button begin ripping.
- Ripping menu contain 4 button :
•
•
“USB” appears on the display screen.
When playing DVD or CD and USB inserted, “Press USB to select device” appear at the top
left corner for a moment.
•
USB MENU screen appears on the TV screen and the saved file is played.
- Bit Rate, press ENTER to change 1ꢀ8kbps ➔ 19ꢀkbps ➔ 1ꢀ8bkps.
Standart : 1ꢀ8kbps.
Better Quality : 19ꢀkbps.
- Device selection, press ENTER to change between deviced (max 4).
- Select - Unselect, Press ENTER to change from Select all or Select none.
- Start ripping, press ENTER to start ripping process.
Skip Forward/Back
During playback, press the (
• When there is more than one file, when you press the
• When there is more than one file, when you press the
/
) button.
button, the next file is selected.
button, the previous file is selected.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
Note
- To return to CDDA screen, press the RETURN button again.
- When the CD ripping is in process the player will automatically begin playing.
- Only Audio CD (CD DA) discs can be ripped.
- Because the speed is ꢀ.6x of normal speed. User is unable to play the CD DA through the rip
ping process.
-
-
Press the STOP ( ) button
Remove the USB cable.
Fast playback
To play back the disc at a faster speed, press (
/
) during playback.
• Each time you press either button, the playback speed will change as follows:
ꢀx ➞ 4x ➞ 8x.
Picture CD Playback
Compatible Devices
1. Select the desired folder.
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable
disk in Windows (ꢀ000 or later) without additional driver installation.)
ꢀ. MP3 Player: Flash type MP3 player.
ꢀ. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER but-
ton.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (ꢀ000 or later) without additional
driver installation.
Note
-
-
Press the STOP button to return to the clips menu.
When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
4. USB Flash Drive: Devices that support USBꢀ.0 or USB1.1.
Rotation
• You may experience a difference in playback quality when you connect a USB1.1 device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
• CBI (Control/Bulk/Interrupt) is not supported.
- Each time the √/® button is pressed, the picture rotates 90 degrees clockwise.
- Each time the π button is pressed, the picture rotates 180 degrees.
- Each time the † button is pressed, the picture changes to the mirror appearance.
Zoom
• Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/3ꢀ (File Allocation Table 16/3ꢀ)
file system is supported.)
- Each time the ENTER Button is pressed repeteadly, the picture is enlarged. zoom mode : 100%,
1ꢀ5%, 150%, ꢀ00%.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide show
karaoke functions
- When you press the ENTER/PLAY at JPEG file,it will go to full screen mode and automatically
slide show.
Karaoke Functions
Operation Sequence (Only DVD-C450K,C350K)
Note
1. Connect the Mixed Audio Out terminals with the TV or Amplifier.
ꢀ. Connect Mic into Mic jack. When a MIC is connected, the karaoke functions can be used.
-
-
Depending on a file size, the amount of time between each picture may be different from the manual.
If you don’t press any button, the slide show will start automatically in about 10 seconds by
default.
Mic Volume and Key Control
1. Playback the Karaoke Disc containing the wanted songs.
- Press the KARAOKE button to select Mic Volume then press KARAOKE button again to select
keycon.
CD-R JPEG Disc
-
-
Only files with the “.jpg” and “.JPG” extensions can be played.
ꢀ. Press the √/® buttons to change the desired tone.
If the disc has not been closed during the recording phase,(ie has not been finalised) it will take
longer to start playing and not all of the recorded files may be played.
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
The name of the JPEG file may not be longer than 8 characters and should contain no blank
spaces or special characters (. / = +).
Note
-
-
-
If you hear feedback (squealing or howling) while using the karaoke feature, move the micro-
phone away from the speakers or turn down the microphone volume or the speaker volume.
When playing MP3, WMA, DTS and LPCM disc, the karaoke functions will not operate.
When the MIC is connected, Digital Out does not work.
-
-
-
-
Only a consecutively written multi-se ssion disc can be played.If there is a blank segment in the
multi-session disc, the disc can be played only up to the blank segment.
A maximum of 500 images can be stored on a single CD.
The MIC sound outputs only from Analog Audio Out.
-
-
-
-
-
-
-
-
-
Kodak Picture CDs are recommended.
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
QSS Picture CD: The unit may not play QSS Picture CD.
Changing setup menu
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played
1. With the unit in stop mode, press the MENU button on the remote control. Use the √/® but-
tons to select Setup, then press the † or ENTER button.
ꢀ. Press the π/† buttons to select a menu option. Press the ® or ENTER to bring up the sub-
menu.
3. To make the setup screen disappear after setting up, press the MENU button again.
Note
Depending on the disc, some Setup Menu selections may not work.
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1. With the unit in stop mode, Press the MENU button.
ꢀ. Press the √/® buttons to select Language Setup Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired language, then press the ENTER button.
Note
- The language is selected and the screen returns to Language Setup menu.
- To make the setup menu disappear, press the MENU button.
- If the selected language is not recorded on the disc, the original pre-recorded language is
selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the π/† buttons to select Rating Level you want, then press the ENTER button.
e.g) Setting up in KID SAFE.
5. Enter your password, If this is the first time, enter 0000. Then, enter a new password. The new
pass-word must be a number other than 0000 to activate the parental control function, then re-
enter the new password.
- Select “Original” if you want the default soundrack language to be the original languange the
disc is recorded in.
- Select “Automatic” if you want the subtitle language to be the same as the language selected
as the audio language.
- Some discs may not contain the language you select : in that case the disc will use its original
languange setting.
Note
ΠKID SAFE.
´ G (General Audiences) : All Ages Admited.
Setting Up the Audio Options
ˇ PG (Parental Guidance suggested) : Some material may not be suitable for young children.
¨ PG 13 (PG-13 Parents strongly cautioned) : Some material may be in appropriate for children
under 13.
ˆ PGR (Parental Guide Recommended) : These are not necessarily unsuitable for children, but
viewer discretion is advised, and parents and guardians are encouraged to supervise younger
viewer.
Audio Options allows you to setup the audio device and sound status settings depending on the
audio system in use.
1. With the unit in stop mode, press the MENU button.
ꢀ. Press the √/® buttons to select Audio Setup page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Ø R (Restricted) : Under 17 requires accompanying adult.
∏ NC17 (NC-17) : No one 17 and under admitted.
” ADULT.
Note :
• Even when PCM Down sampling is Off Some discs will only output down sampled audio
through the digital outputs.
-
If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
• There is no analog audio output when you play a DTS sound disc.
Setting Up the DivX
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,
1. With the unit in Stop mode, press the MENU button.
ꢀ. Press the √/® buttons to select DivX Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Inc.
Setting Up the Display Options
Note :
Display options enable you to set various video functions of the player.
• Press Ok will make the registration code window disappear.
• DivX can only be accessed at stop mode.
1. With the unit in Stop mode, press the MENU button.
ꢀ. Press the √/® buttons to select Display Setup Page, then press the † or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
•
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
•
•
If Video Output is set incorrectly, the screen may be blocked.
When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
Setting Up the Rating Level / Changing the Password
1. With the unit in Stop mode, press the MENU button.
ꢀ. Press the √/® buttons to select Parental Page, then press the † or ENTER button.
3. Press the π/† buttons to select Parental/Password, then press the ® or ENTER button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
memo
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
Action
The screen is
blocked
• Press the
■
/
button (in front panel) for more than 5 seconds under no
disc inside. All settings will revert to the factory settings.
• Press the
■
/
button (in front panel) for more than 5 seconds under
Forgot password.
no disc inside. All setings including the password will revert to the factory
settings. Don’t use this unless absolutely necessary.
Specifications
Power Requirements
AC 110-ꢀ40 V ~ 50/60 Hz
DVD-C450K : 1.5 Kg
DVD-C350K,C350 : 1.ꢀ Kg
Weight
Power Comsumption
6W
General
DVD-C450K :
430mm (W)X ꢀ07mm (D) X 4ꢀmm (H)
DVD-C350K,C350 :
Dimensions
360mm (W) X ꢀ07mm(D) X 4ꢀmm (H)
Operating Temperature Range
Operating Humidity Range
+5°C to +35°C
10 % to 75 %
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video
Output
Component Video
Audio
Output
Frequency Response
ꢀ0Hz ~ ꢀ0Khz
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
memo
Download from Www.Somanuals.com. All Manuals Search And Download.
memo
Download from Www.Somanuals.com. All Manuals Search And Download.
memo
Download from Www.Somanuals.com. All Manuals Search And Download.
$POUBDUꢀ4".46/(ꢀ803-%ꢀ8*%&
*GꢀZPVꢀIBWFꢀBOZꢀRVFTUJPOTꢀPSꢀDPNNFOUTꢀSFMBUJOHꢀUPꢀ4BNTVOHꢀQSPEVDUTꢁꢀQMFBTFꢀDPOUBDUꢀUIFꢀ4".46/(ꢀDVTUPNFSꢀDBSFꢀDFOUFSꢂ
Region
Area
Contact Center
1-800-SAMSUNG (726-7864)
Web Site
Canada
www.samsung.com/fi
North America Mexico
U.S.A
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG (726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG (726-7864)
0-800-100-5303
01-8000112112
Argentine
Brazil
Chile
Nicaragua
Honduras
Costa Rica
Ecuador
El Salvador
Guatemala
Jamaica
Latin America
Panama
Puerto Rico
Rep. Dominica
Trinidad & Tobago
Venezuela
Colombia
Belgium
02 201 2418
Czech Republic
Denmark
Finland
800-SAMSUNG (800-726786)
8-SAMSUNG (7267864)
30-6227 515
France
01 4863 0000
Germany
Hungary
Italia
01805-SAMSUNG (726-7864 å 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (å 0,10/Min)
3-SAMSUNG (7267864)
0 801 1SAMSUNG (172678), 022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
Luxemburg
Netherlands
Norway
Poland
Europe
Portugal
Slovakia
Spain
Sweden
U.K
Eire
Austria
0818 717 100
0810-SAMSUNG (7267864, å 0.07/min)
Switzerland
0848-SAMSUNG (7267864, CHF 0.08/min)
Russia
8-800-555-55-55
Kazakhstan
Uzbekistan
Kyrgyzstan
Tadjikistan
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
CIS
Ukraine
8-800-502-0000
Belarus
Moldova
Lithuania
Latvia
810-800-500-55-500
00-800-500-55-500
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858, 010-6475 1880
Estonia
Australia
New Zealand
China
Hong Kong
3698-4698
India
Indonesia
Japan
3030 8282, 1800 110011, 1800 3000 8282
0800-112-8888
0120-327-527
Asia Pacific
Malaysia
1800-88-9999
1-800-10-SAMSUNG (726-7864), 1-800-3-SAMSUNG (726-7864),
1-800-8-SAMSUNG (726-7864), 02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Philippines
Singapore
Thailand
Taiwan
Vietnam
Turkey
South Africa
U.A.E
Middle East &
Africa
0860-SAMSUNG (726-7864 )
800-SAMSUNG (726-7864), 8000-4726
AK68-01919A
Download from Www.Somanuals.com. All Manuals Search And Download.
|