Samsung DVD Player AK68 00918M User Guide

ﻓﻲ

دي

ﻞ

ﺸﻐﻴ

ﺗ

ﺟﻬﺎ

DVD-P260K

www.samsung.com/mea

AK68-00918M

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Player

DVD-P260K

www.samsung.com/mea

AK68-00918M

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

1. Setting up

4. Disc

Refer to the identification label located on

the rear of your player for its proper operat-

ing voltage.

Do not clean the disc using record-cleaning

sprays, benzene, thinner, or other volatile

solvents that may cause damage to the disc

surface.

Install your player in a cabinet with ade-

quate ventilation holes (7~10cm). Do not

block ventilation holes on any of the compo-

nents for air circulation.

Do not touch the disc’s signal surface. Hold

by the edges or by one edge and the hole

in the center.

Do not push the disc tray in by hand.

Do not stack components.

Wipe the dirt away gently; never wipe a

cloth back and forth over the disc.

Be sure to turn all components off before

moving the player.

5. Environmental info

Before connecting other components to this

player, be sure to turn them off.

- The battery used in this product contains

chemicals that are harmful to the environ

ment.

Be sure to remove the disc and turn off the

player after use, especially if you are not

going to use it for a long time.

- So, dispose of batteries in the proper man

ner, according to federal, state, and local

regulations.

2. For your safety

The product unit accompanying this user manual is

licensed under certain intellectual property rights of

certain third parties. This license is limited to private

non-commercial use by end-user consumers for

licensed contents. No rights are granted for

This product utilizes a laser. Use of controls

or adjustments or performance of proce-

dures other than those specified herein may

result in hazardous radiation exposure.

Do not open covers and do not repair your-

self. Refer servicing to qualified personnel.

commercial use. The license does not cover any

product unit other than this product unit and the

license does not extend to any unlicensed product

unit or process conforming to ISO/OUR 11172-3 or

ISO/OUR 13818-3 used or sold in combination with

this product unit. The license only covers the use of

this product unit to encode and/or decode audio files

conforming to the ISO/OUR 11172-3 or ISO/OUR

13818-3. No rights are granted under this license for

product features or functions that do not conform to

the ISO/OUR 11172-3 or ISO/OUR 13818-3.

3. Caution

Your player is not intended for industrial use

but for domestic purposes. Use of this prod-

uct is for personal use only.

Do not put any container filled with liquid or

any small metal objects on the player.

Exterior influences such as lightning and

static electricity can affect normal operation

of this player. If this occurs, turn the player

off and on again with the POWER button, or

disconnect and then reconnect the AC

power cord to the AC power outlet. The

player will operate normally.

CAUTION: USE OF ANY CONTROLS,

ADJUSTMENTS, OR PROCEDURES OTHER

THAN SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

When condensation forms inside the player

due to sharp changes in temperature, the

player may not operate correctly. If this

occurs, leave the player at room tempera-

ture until the inside of the player becomes

dry and operational.

Download from Www.Somanuals.com. All Manuals Search And Download.

BEFORE YOU

START

TABLE OF

CONTENTS

Accessories

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Before you start . . . . . . . . . . . . . . . . . . . . . . . . . 3

Setup

General Features . . . . . . . . . . . . . . . . . . . . . . . . 4

Disc Type and Characteristics . . . . . . . . . . . . . . . 5

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Tour of the Remote Control . . . . . . . . . . . . . . . . . 8

Connections

Remote Control

Batteries for Remote

Choosing a Connection . . . . . . . . . . . . . . . . . . . . 9

Basic Functions

Control (AAA Size)

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Using the Search and Skip Functions . . . . . . . . 16

Using the Display Function . . . . . . . . . . . . . . . . 16

Using the Disc and Title Menu . . . . . . . . . . . . . . 17

Using the Function Menu . . . . . . . . . . . . . . . . . . 17

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Slow Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Advanced Functions

User’s Manual

Video/Audio

Cable

Adjusting the Aspect Ratio (EZ View) . . . . . . . . . 18

Selecting the Audio Language . . . . . . . . . . . . . . 19

Selecting the Subtitle Language . . . . . . . . . . . . . 19

Changing The Camera Angle . . . . . . . . . . . . . . . 19

Using the Instant Replay/Skip Function. . . . . . . . 20

Using the Bookmark Function. . . . . . . . . . . . . . . 20

Using the Zoom Function . . . . . . . . . . . . . . . . . . 20

Clips Menu for MP3/WMA/JPEG/CD Audio. . . . . 21

Folder Selection . . . . . . . . . . . . . . . . . . . . . . . . . 21

MP3/WMA/CD Audio Playback . . . . . . . . . . . . . . 21

Picture CD Playback . . . . . . . . . . . . . . . . . . . . . 22

Karaoke Functions

Install Batteries in the Remote control

1. Open the battery cover on the back of the remote

control.

2. Insert two AAA batteries.

Make sure that the

polarities (+ and -) are aligned correctly.

3. Replace the battery cover.

Karaoke Functions . . . . . . . . . . . . . . . . . . . . . . . 23

Changing Setup Menu

Using the Setup Menu . . . . . . . . . . . . . . . . . . . . 24

Setting Up the Language Features . . . . . . . . . . . 24

Setting Up the Audio Options . . . . . . . . . . . . . . . 25

Setting Up the Display Options. . . . . . . . . . . . . . 26

Setting Up the Parental Control . . . . . . . . . . . . . 27

Reference

If remote control doesn’t operate

properly:

- Check the polarity + - of the batteries (Dry-Cell)

- Check if the batteries are drained.

- Check if remote control sensor is blocked by

obstacles.

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 29

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 30

- Check if there is any fluorescent lighting nearby.

Download from Www.Somanuals.com. All Manuals Search And Download.

SETUP

General Features

Note

Excellent Sound

Dolby Digital, a technology developed by Dolby

Laboratories, provides crystal clear sound reproduc-

tion.

- Discs which cannot be played with this player.

•

DVD-ROM

CD-ROM

CDI

• DVD-RAM

• CDV

Screen

Both regular and widescreen(16:9) pictures can be

viewed.

• CVD

CDGs play audio only, not graphics.

- Ability to play back may depend on recording

conditions.

Slow Motion

An important scene can be viewed in slow motion.

•

DVD-R, +R

CD-RW

Parental Control (DVD)

DVD+RW, -RW (V mode)

The parental control allows users to set the level

necessary to prohibit children from viewing harmful

movies such as those with violence, adult subject

matter, etc.

- The unit may not play certain CD-R, CD-RW

and DVD-R due to the disc type or recording

conditions.

COPY PROTECTION

Various On-Screen Menu Functions

You can select various languages (Audio/Subtitle)

and screen angles while enjoying movies.

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVD

player directly to your TV, not to a VCR. Connecting

to a VCR results in a distorted picture from copy-

protected DVD discs.

Progressive Scan

Progressive scanning creates an improved picture

with double scan lines of a conventional interlaced

picture.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection tech-

nology must be auzthorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise autho-

rized by Macrovision Corporation. Reverse engi-

neering or disassembly is prohibited.

EZ VIEW (DVD)

Easy View enables picture adjustment to match

your TV's screen size (16:9 or 4:3).

Digital Photo Viewer (JPEG)

You can view digital photos on your TV.

Repeat

You can repeat a song or movie simply by pressing

the REPEAT button.

PROGRESSIVE SCAN OUTPUTS

(525p/625p)

MP3/WMA

This unit can play discs created from MP3/WMA

files.

“CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE, IN CASE OF 525 OR 625 PROGRES-

SIVE SCAN PICTURE PROBLEMS, IT IS RECOM-

MENDED THAT THE USER SWITCH THE CON-

NECTION TO THE ‘STANDARD DEFINITION’ OUT-

PUT. IF THERE ARE QUESTIONS

Instant Replay (DVD)

This function is used to replay the previous 10

seconds of a movie from the current position.

Instant Skip (DVD)

This function skips playback ahead 10 seconds

REGARDING YOUR TV SET COMPATIBILITY

WITH THIS MODEL 525p AND 625p DVD PLAYER,

PLEASE CONTACT SAMSUNG'S CUSTOMER

SERVICE CENTER.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Type and Characteristics

This DVD player is capable of playing the following types of discs with the corresponding logos:

Recording Types

Disc Size

Max. Playing Time

Characteristics

Disc Types (Logos)

DVD contains excellent sound and

video due to Dolby Digital and MPEG-

2 system.

Single-sided 240 min.

Double-sided 480 min.

DVD

12 Cm

Audio

Various screen and audio functions

can be easily selected through the on-

screen menu.

Video

Single-sided 80 min.

8 Cm

Double-sided 160 min.

VIDEO-CD

AUDIO-CD

74 min.

20 min.

12 Cm

8 Cm

Audio

Video with CD sound, VHS quality &

MPEG-1 compression technology.

Video

74 min.

20 min.

12 Cm

8 Cm

CD is recorded as a Digital Signal

with better audio quality, less distor-

tion and less deterioration of audio

quality over time.

Audio

Disc Markings

Region Number

Play Region Number

Both the DVD player and the discs are coded

by region. These regional codes must match in

order for the disc to play. If the codes do not

match, the disc will not play.

PAL broadcast system in

U.K, France, Germany, etc.

PAL

Dolby Digital disc

STEREO

Stereo disc

The Region Number for this player is

described on the rear panel of the player.

DIGITAL

SOUND

Digital Audio disc

DTS disc

MP3 disc

You must only insert one DVD disc at a time.

Inserting two or more discs will not allow to

play them back and it may cause damage to

the DVD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description

Front Panel Controls

1. STANDBY/ON (

)

6. OPEN/CLOSE (

)

When STANDBY/ON is pressed on, the indicator goes

out and the player is turned on.

Press to open and close the disc tray.

7. DISPLAY

2. STANDBY indicator

Operation indicators are displayed here.

When the unit is first plugged in, this indicator lights.

SKIP (

) SEARCH

3. MIC

Allow you to search forward/backward through

a disc. Use to skip the title, chapter or track.

Connect Microphone for karaoke functions.

4. MICROPHONE VOLUME

Use to adjust microphone volume level. Use the button

by pressing it. Turn it to the left or right to control the vol-

ume.

9. STOP (

)

Stops disc play.

10. PLAY/PAUSE (

)

Begin or pause disc play.

5. DISC TRAY

Place the disc here.

Front Panel Display

Total playing time/Displays various messages concerning operations such as PLAY,

STOP, LOAD ...

nodSC: No disc loaded.

OPEn: The disc tray is open.

LOAd: Player is loading disc information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

1.DIGITAL AUDIO OUT JACKS

3. AUDIO OUT JACKS

Connect to the Audio input jacks of your television or

audio/video receiver.

- Use either an optical or coaxial digital cable to connect to

a compatible Dolby Digital receiver.

- Use to connect to an A/V Amplifier that contains a

Dolby Digital, MPEG2 or DTS decoder.

4. VIDEO OUT JACK

- Use a video cable to connect to the Video input jack on

your television.

2. COMPONENT VIDEO OUT JACKS

- Use these jacks if you have a TV with Component

- The Video Output in Setup Menu must be set to

Component(I-SCAN) or S-Video.

5. S-VIDEO OUT JACK

- Use the S-Video cable to connect this jack to the

S-Video jack on your television for higher picture

quality.

Video in jacks. These jacks provide P , P and Y

video.

- If Component(P-SCAN) Video Output is selected in

Setup Menu, progressive scan mode will work.

- If Component(I-SCAN) Video Output is selected in

Setup Menu, interlaced scan mode will work.

- The Video Output in Setup Menu must be set to

S-Video.

Note

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in

the TV’s menu system.

- If Component (P-SCAN) Video Output is selected in Setup Menu, S-Video will not work.

- See pages 26 ~ 27 to get more information on how to use the setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tour of the Remote Control

5. INSTANT REPLAY Button

This function is used to replay the previous 10 seconds

of a movie from the current position.

6. SKIP Buttons (

)

Use to skip the title, chapter or track.

7. STOP Button (

8. MENU Button

)

Brings up the DVD player’s menu.

9. ENTER/› ‚ ¥ Š Buttons

/ , /

This button functions as a toggle switch.

10. EZ VIEW Button

The aspect ratio of a picture can easily be adjusted

according

to the screen size of your TV (16:9 or 4:3).

11. DISC MENU Button

Brings up the Disc menu.

12. SUBTITLE Button

13. AUDIO Button

Use this button to access various audio functions on a

disc.

14. ZOOM Button

Enlarge DVD Picture

15. OPEN/CLOSE ( ) Button

To open and close the disc tray.

16. STEP Button

Advances play one frame at a time.

17. INSTANT SKIP Button

This function skips playback ahead 10 seconds.

18. PLAY/PAUSE Button (

Begin/Pause disc play.

)

19. RETURN Button

Returns to a previous menu.

20. INFO Button

1. DVD POWER Button

Displays the current disc mode.

Turns the power on or off.

21. CANCEL Button

2. NUMBER Buttons

Use to remove menus or status displays from the

screen.

3. VIDEO SEL. Button

22. KARAOKE Button

Use to begin Karaoke functions.

Selects video output formats

4. SEARCH Buttons (

)

23. REPEAT Button

Allow you to search forward/backward through a disc.

Allows you to repeat play a title, chapter, track, or disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and

other components.

Before Connecting the DVD Player

Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

Refer to the user’s manual of the additional components you are connecting for more information on those

particular components.

Connection to a TV (For Video)

Using video/audio cables, connect the VIDEO

(yellow)/AUDIO (red and white) OUT terminals on the rear

of the DVD player to the VIDEO (yellow)/AUDIO (red and

white) IN terminals of TV.

Turn on the DVD player and TV.

RED

WHITE

YELLOW

Audio Cable

Video Cable

RED

WHITE

YELLOW

Press the TV/VIDEO button on the TV's remote control to

select Video.

Note

Noise may be generated if the audio cable is too close to the power cable.

If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)

The number and position of terminals can vary depending on your TV set. Please refer to the user's man-

ual of the TV.

If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the

DVD player.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV (S-Video)

Connecting to your TV using an S-Video cable.

You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and

color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered

through the audio output.)

Using an S-Video cable (not included), connect the S-VIDEO

OUT terminal on the rear of the DVD player to the S-VIDEO

IN terminal of TV.

Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the DVD player to the

AUDIO (red and white) IN terminals of TV. Turn on the

DVD player and TV.

WHITE

RED

S-Video Cable

Not Included)

Audio Cable

(

Press the TV/VIDEO button on the TV's remote control to

WHITE

RED

select S-Video.

Set the Video Output to S-Video in the Display Setup

menu. (See pages 26 to 27)

Note

If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)

The number and position of terminals can vary depending on the TV set.

Please refer to the user's manual of the TV.

- Please do not connect S-Video and Component Video (Y, Pb, Pr) output simultaneously, as they may

interfere and degrade both video output quality.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV (Interlace)

Connecting to your TV using Component video cables.

You will enjoy high quality and accurate color reproduction images. Component video separates the pic-

ture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio

signals are delivered through the audio output.)

Using component video cables (not included), connect the

COMPONENT VIDEO OUT terminal on the rear of the

DVD player to the COMPONENT IN terminal of TV.

RED

BLUE

GREEN

Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the DVD player to the

AUDIO (red and white) IN terminals of TV. Turn on the

DVD player and TV.

RED

WHITE

Audio Cable

Component Cable

(Not Included)

Press the TV/VIDEO button on the TV's remote control to

select Component or DVD.

RED

WHITE

RED

GREEN

BLUE

Set the Video Output to (I-SCAN) in the Display Setup

menu. (See pages 26 to 27)

Note

If Video output is incorrectly set to S-Video, the screen will turn red.

If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)

The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “P , P , Y”

depending on the manufacturer. The number and position of terminals can vary depending on the TV set.

Please refer to the user's manual of the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV (Progressive)

Using component video cables (not included), connect the

COMPONENT VIDEO OUT terminal on the rear of the

DVD player to the COMPONENT IN terminal of TV.

RED

BLUE

GREEN

Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the DVD player to the

AUDIO (red and white) IN terminals of TV. Turn on the

DVD player and TV.

RED

WHITE

Audio Cable

Component Cable

(Not Included)

Press the TV/VIDEO button on the TV's remote control to

select Component or DVD.

RED

WHITE

RED

GREEN

BLUE

Set the Video Output to (P-SCAN) in the Display Setup

menu. (See pages 26 to 27)

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive

You need a TV set supporting the progressive scan

Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s

input function. And you have to set up the TV

menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Note

What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive

scanning method can provide better and clearer picture quality.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Audio System (2 Channel Amplifier)

Using the audio cables, connect the AUDIO (red and

white) OUT terminals on the rear of the DVD player to the

AUDIO (red and white) IN terminals of the Amplifier.

Using the video signal cable(s), connect the VIDEO, S-

VIDEO or COMPONENT OUT terminals on the rear of the

DVD player to the VIDEO, S-VIDEO or COMPONENT IN

terminal of your TV.

RED

WHITE

Turn on the DVD player, TV, and Amplifier.

RED

WHITE

Press the input select button of the Amplifier to select exter-

nal input in order to hear sound from the DVD player.

Note

Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

Please set the audio in the menu screen according to the Amplifier. (See pages 25 to 26)

The position of terminals can vary depending on the Amplifier.

Please refer to the user's manual of the Amplifier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

If using an optical cable (not included), connect the DIGI-

TAL AUDIO OUT (OPTICAL) terminal on the rear of the

DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal

of the Amplifier.

If using a coaxial cable (not included), connect the DIGI-

TAL AUDIO OUT (COAXIAL) terminal on the rear of the

DVD player to the DIGITAL AUDIO IN (COAXIAL) termi-

nal of the Amplifier.

Using the video signal cable(s), connect the VIDEO, S-

VIDEO or COMPONENT OUT terminals on the rear of the

DVD player to the VIDEO, S-VIDEO or COMPONENT IN

Optical Cable

Not Included

Coaxial Cable

Not Included

terminal of TV.

Turn on the DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select

external input in order to hear sound from the DVD player.

Note

When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in

Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.

Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause

damage to the speakers and your ears.

Please set the audio in the menu screen according to the Amplifier. (See pages 25 to 26)

The position of terminals can vary depending on the Amplifier.

Please refer to the user's manual of the Amplifier.

Please remove the dust cover before using the optical cable (not included) and put the cover on the cable

again when it's not used.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC FUNCTION

4. Stopping Play

Playing a Disc

Press the STOP ( ) button during play.

Before Play

5. Removing Disc

Turn on your TV and set it to the correct Video

Input by pressing TV/VIDEO button on the TV

remote control.

Press the OPEN/CLOSE ( ) button.

6. Pausing Play

Press the PLAY/PAUSE (

remote control during play.

- Screen stops, no sound.

To resume, press the PLAY/PAUSE (

button once again.

) or STEP button on the

If you connected an external Audio System, turn

on your Audio System and set it to the correct

Audio Input.

)

After plugging in the player, the first time you press the DVD

POWER button, this screen comes up: If you want to select

a language, press a NUMBER button. (This screen will only

appear when you plug in the player for the first time.)

If the language for the startup screen is not set, the settings

may change whenever you turn the power on or off.

Therefore, make sure that you select the language you want

to use.

7. Step Motion Play (Except CD)

Press the STEP button on the remote control during play.

- Each time the button is pressed, a new frame will

appear.

- No sound is heard during STEP mode.

- Press the PLAY/PAUSE ( ) button to resume

normal play.

Once you select a menu language, you can change it by

- You can only perform step motion play in the

forward direction.

pressing the

button on the front panel of the unit for

more than 5 seconds with no disc in the unit. Then the

SELECT MENU LANGUAGE window appears again where

you can reset your preferred language.

8. Slow Motion Play

Press the SEARCH (

) button to choose

the play speed between 1/8, 1/4 and 1/2 of normal during

PAUSE or STEP mode.

W O Ð d F K Ã

G {

- No sound is heard during slow mode.

- Press the PLAY/PAUSE ( ) button to resume

normal play.

Note

- If the player is left in the stop mode for more

than one minute without any user interaction, a

screen saver will be activated. Press the

PLAY/PAUSE ( ) button to resume normal play.

- If the player is left in the stop mode for more than

about 30 minutes, the power will automatically

shut off except when the MIC is connected.

(Automatic Power-Off Function)

Playback

1. Press the OPEN/CLOSE ( ) button. The STANDBY

indicator light goes out and the tray opens.

2. Place a disc gently into the tray with the disc’s label facing

up.

You must only insert one DVD disc at a time.

Inserting two or more discs will not allow to play them

back and it may cause damage to the DVD player.

- If the player is left for about 5 minutes in pause

mode, it will stop.

- This (

) icon indicates an invalid button press.

3. Press the PLAY/PAUSE (

) button or OPEN/ CLOSE

(

) button to close the disc tray.

When you stop disc play, the player remembers

where you stopped, so when you press

PLAY/PAUSE ( ) button again, it will pick up where

you left off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Search and Skip

Functions

Using the Display Function

When Playing a DVD/VCD

During play, you can search quickly through a chapter or

track, and use the skip function to jump to the next selec-

tion.

1. During play, press the INFO button on the remote control.

- You can select Info in the function menu by pressing

the MENU button.

2. Press the ›/‚ꢀbuttons to select the desired item.

- Only Menu Off is available for VCD2.0. Each press of

the DISC MENU button toggles between Menu On and

Menu Off.

Searching through a Chapter or

Track

During play, press the SEARCH (

) button on the

remote control for more than 1 second.

3. Press the ¥/Š buttons to make the desired setup and then

press the ENTER button.

- You may use the number buttons of the remote control

to directly access a title, chapter or to start the

playback from the desired time.

DVD 2X, 4X, 64X, 128X

VCD 4X, 8X

2X, 4X, 8X

4. To make the screen disappear, press the INFO button

again.

Note

- The speed marked in this function may be

different from the actual speed of playback.

- No sound is hearing during search mode

(Except CD).

Note

To access the desired title when there are

more than one in the disc. For example, if

there is more than one movie on a DVD,

each movie will be identified.

Title

Skipping Tracks

Most DVD discs are recorded in chapters so

that you can quickly find a specific passage

(similar to tracks on an audio CD).

Chapter

During play, press the SKIP (

- When playing a DVD, if you press the SKIP (

moves to the next chapter. If you press the SKIP (

) button.

) button, it

)

Allows playback of the film from a desired

time. You must enter the starting time as a

reference.The time search function does not

operate on some disc.

button, it moves to the beginning of the chapter. One more

press makes it move to the beginning of the previous

chapter.

Time

Audio

- When playing a VCD 2.0 in Menu Off mode, or a VCD 1.1

Refers to the language of the film soundtrack.

In the example, the soundtrack is played in

English 5.1CH. A DVD disc can have up to

eight different soundtracks.

or a CD, if you press the SKIP (

) button, it moves to

) button, it moves

the next track. If you press the SKIP (

to the beginning of the track. One more press makes it

move to the beginning of the previous track.

Refers to the subtitle languages available in

the disc. You will be able to choose the

subtitle languages or, if you prefer, turn them

off from the screen. A DVD disc can have up

to 32 different subtitles.

- If a track exceeds 15 minutes when playing a VCD and

Subtitle

you press the

button, it moves forward 5 minutes.

button, it moves backward 5 minutes.

If you press the

Note

Only Menu Off is available for VCD2.0. Each press

of the DISC MENU button toggles between Menu

On and Menu Off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Disc and Title

Using the Function Menu

1. Press the MENU button during playback.

2. Press the ›/‚ buttons to select Function, then press the

Š or ENTER button.

Using the Disc Menu

1. During the playback of a DVD disc, press the MENU button

on the remote control.

- Info (See page 16)

- Zoom (See pages 20 to 21)

2. Press the ›/‚ buttons to select Disc Menu, then press the

- Bookmark (See page 20)

Š or ENTER button.

- Repeat (See pages 17 to 18)

- EZ View (See pages 18 to 19)

- Angle (See pages 19 to 20)

Press ENTER key

for Disc Menu

Info

Zoom

Bookmark

Repeat

EZ View

Angle

Enter

Return

Note

Depending on a disc, the Disc Menu may not

work.

Enter

Return

3. Press the ›/‚ buttons to select one of the six

You can also use the Disc Menu, using the

DISC MENU button on the remote control.

Only Menu Off is available for VCD2.0. Each

press of the DISC MENU button toggles

between Menu On and Menu Off.

functions. Then press the Š or ENTER button to access the

function.

You can also directly select these functions using their

respective buttons on the remote control.

- INFO

- EZ VIEW

- REPEAT

Using the Title Menu

1. During the playback of a DVD disc, press the MENU

Repeat Play

button on the remote control.

Repeat the current track, chapter, title, a chosen

section (A-B), or all of the disc.

When playing a DVD/VCD

2. Press the ›/‚ buttons to select Title Menu, then press

the Š or ENTER button.

1. Press the REPEAT button on the remote control.

Press ENTER key

for Title Menu

Repeat screen appears.

2. Press the ¥/Š buttons to select Chapter, Title or A-B,

then press the ENTER button.

- DVD repeats play by chapter or title, VCD

repeat play by disc or track.

Enter

Return

- Chapter ( ): repeats the chapter that is playing.

Note

- Title ( ): repeats the title that is playing.

Depending on a disc, the Title Menu may not

work.

- Disc ( ): repeats the disc that is playing.

- Track ( ): repeats the track that is playing.

- A-B: repeats a segment of the disc that you select.

Title Menu will only be displayed if there are at

least two titles in the disc.

DVD

ENTER REPEAT

Off

01 A - B

VCD

ENTER REPEAT

Off

01 A - B

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the A-B Repeat function

1. Press the REPEAT button on the remote control.

2. Press the ¥/Š buttons to Select A-B button.

3. Press the ENTER button at the point where you want

repeat play to start (A). B is automatically highligh ted.

4. Press the ENTER button at the point where you want the

repeat play to stop (B).

ADVANCED

FUNCTIONS

Adjusting the Aspect Ratio

(EZ View)

- To return to normal play, press the CANCEL button.

5. To return to normal play, press REPEAT button again, then

press the ¥/Š buttons to select Off and press ENTER

button.

To play back using aspect ratio

(DVD)

DVD

ENTER REPEAT

Off

01 A - B

Press the EZ VIEW button.

- The screen size changes when the button is pressed

repeatedly.

- The screen zoom mode operates differently depending on the

screen setting in the Display Setup menu.

- To ensure correct operation of the EZ VIEW button, you

should set the correct aspect ratio in the Display Setup

menu. (See pages 26 to 27).

VCD

ENTER REPEAT

Off

01 A - B

EZ VIEW

4:3 Letter Box

Note

- A-B REPEAT allows you to set point (B) directly

after point (A) has been set.

- Depending on a disc, the Repeat function may

not work.

If you are using a 16:9 TV

- Only Menu Off is available for VCD2.0. Each

press of the DISC MENU button toggles

between Menu On and Menu Off.

For 16:9 aspect ratio discs

- WIDE SCREEN

Displays the content of the DVD title in 16:9 aspect ratio.

- SCREEN FIT

The top and bottom portions of the screen are cut off.

When playing a 2.35:1 aspect ratio disc, the black bars at

the top and bottom of the screen will disappear. The picture

will look vertically stretched. (Depending on a type of disc,

the black bars may not disappear completely.)

- ZOOM FIT

Slow Play

This feature allows you to play scenes slowly con-

taining sports, dancing, musical instruments being

played etc., so you can study them more closely.

The top, bottom, left and right of the screen are cut off and

the central portion of the screen is enlarge

For 4:3 aspect ratio discs

- Normal Wide

When playing a DVD

Displays the content of the DVD title in 16:9 aspect ratio.

The picture will look horizontally stretched.

- SCREEN FIT

1. During play, press the PLAY/PAUSE (

) button.

2. Press the SEARCH button to choose

(

)

The top and bottom portions of the screen are cut off and

the full screen appears.

The picture will look vertically stretched.

- ZOOM FIT

the play speed between 1/8, 1/4 and 1/2 of normal during

PAUSE or STEP mode.

The top, bottom, left and right portions of the screen are

cut off and the central portion of the screen is enlarged.

- Vertical Fit

When a 4:3 DVD is viewed on a 16:9 TV, black bars will

appear at the left and right of the screen in order to prevent

the picture from looking horizontally stretched.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

If you are using a 4:3 TV

This function depends on audio languages are

encoded on the disc and may not work.

For 16:9 aspect ratio discs

A DVD disc can contain up to 8 audio languages.

- 4:3 Letter Box

To have the same audio language come up

whenever you play a DVD;

Refer to “Using the Audio Language” on page

25.

Displays the content of the DVD title in 16:9 aspect ratio. The

black bars will appear at the top and bottom of the screen.

- 4:3 Pan&Scan

The left and right portions of the screen are cut off and the

central portion of the 16:9 screen is displayed.

- SCREEN FIT

Selecting the Subtitle

Language

The top and bottom portions of the screen are cut off and a

full screen appears. The picture will look vertically stretched.

- ZOOM FIT

You can select a desired subtitle quickly and easily

with the SUBTITLE button.

The top, bottom, left and right of the screen are cut off and

the central portion of the screen is enlarged.

Using the SUBTITLE button (DVD)

1. Press the SUBTITLE button. The subtitle languages are

represented by abbreviations. The subtitle changes when

the button is pressed repeatedly.

For 4:3 aspect ratio discs

- Normal Screen

Displays the content of the DVD title in 4:3 aspect ratio.

- SCREEN FIT

DVD

The top and bottom portions of the screen are cut off and the

full screen appears. The picture will look vertically stretched.

- ZOOM FIT

SUBTITLE

Off

The top, bottom, left and right portions of the screen are cut

off and the central portion of the screen is enlarged.

2. To remove the SUBTITLE icon, press the CANCEL or

RETURN button.

Note

This function may behave differently depending on

the type of disc.

- You have to change the desired subtitle in the

Disc Menu, according to discs. Press the DISC

MENU button.

- This function depends on what subtitles are

encoded on the disc and may not work on all

DVDs.

Selecting the Audio

Language

- A DVD disc can contain up to 32 subtitle

languages.

You can select a desired audio language quickly and

easily with the AUDIO button.

- To have the same subtitle language come up

whenever you play a DVD; Refer to “Using the

Subtitle Language” on page 25.

Using the AUDIO button

1. Press the AUDIO button. The Audio changes when the

button is pressed repeatedly.

Changing the Camera

Angle

The audio languages are represented by

abbreviations.

DVD

When a DVD contains multiple angles of a particular

scene, you can use the ANGLE function.

Using the ANGLE Function (DVD)

If the disc contains multiple angles, the ANGLE

appears on the screen.

AUDIO

ENG DOLBY DIGITAL 5.1CH

VCD

When playing a VCD,

AUDIO

Stereo

1. During play mode, press the MENU button on the remote

control.

you can select among

Stereo, Left or Right

2. Press the ›/‚ buttons to select Function, then press the

or ENTER button.

3. Press the ›/‚ buttons to select Angle, then press the

or ENTER button.

2. To remove the AUDIO icon, press the CANCEL or RETURN

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Info

Zoom

Bookmark

Repeat

EZ View

Angle

Bookmark

Repeat

EZ View

Angle

Enter

Return

Enter

Return

3. Press the ›/‚ buttons to select Bookmark, then press the

or ENTER button.

4. Press the ¥/Š buttons or you can use the number buttons

on the remote control to select the desired angle.

4/6

4. When you reach the scene you want to mark, press the

ENTER button. Up to three scenes may be marked at a

time.

Note

- If the disc has only one angle, this feature won’t

work. Currently, very few discs have this feature.

- Depending on the disc, these functions may not

work

Note

Using the Instant

Replay/Skip Function

- Only Menu Off is available for VCD2.0. Each

press of the DISC MENU button toggles

between Menu On and Menu Off.

- Depending on a disc, the Bookmark function

may not work.

Using the Instant Replay function (DVD)

If you miss a scene, you can see it again using this

function.

Recalling a Marked Scene

1~3. The first 1~3 steps are the same as those for “Using the

Bookmark Function” on page 20.

If you press the INSTANT REPLAY button, the current scene

moves backward about 10 seconds, and plays back.

4. Press the ¥/Š buttons to select a marked scene.

Using the Instant Skip function (DVD)

Use this function to skip playback about 10 seconds

ahead of the current scene.

Press the INSTANT SKIP button.

5. Press the PLAY/PAUSE (

) button to skip to the marked

- Playback will skip ahead 10 seconds.

scene.

Note

Clearing a Bookmark

Depending on the disc, these functions may not

work.

1~3. The first 1~3 steps are the same as those for “Using the

Bookmark Function” on page 20.

Using the Bookmark

Function

4. Press the ¥/Š buttons to select the bookmark number you

want to delete.

5. Press the CANCEL button to delete a bookmark number.

This feature lets you bookmark sections of a DVD or

VCD (Menu Off mode) so you can quickly find them

at a later time.

Using the Bookmark Function

(DVD/VCD)

Using the Zoom Function

(DVD/VCD)

1. During play, press the MENU button on the remote control.

2. Press the ›/‚ buttons to select Function, then press the

or ENTER button.

1. During play or pause mode, press the MENU button on the

remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Press the ›/‚ buttons to select Function, then press the

or ENTER button.

3. Press the ›/‚ buttons to select Zoom, then press the

or ENTER button.

: MP3 file icon.

: WMA file icon.

: JPEG file icon.

: Folder icon.

: Current Folder icon.

4. Press the ›/‚ or ¥/Š buttons to select the part of the

screen you want to zoom in on. Press the ENTER button.

- During DVD play, press ENTER to zoom in

2X/4X/2X/Normal in order.

: CD Audio file icon.

- During VCD play, press ENTER to zoom in

2X/4X/2X/Normal in order.

Folder Selection

Info

The folder can be selected both in Stop or Play mode.

Zoom

Bookmark

Repeat

EZ View

Angle

- To select the Parent Folder

Press the RETURN button to go to parent folder, or press the

›/‚ buttons to select “..” and press ENTER to go to the

parent folder.

Enter

Return

- To select the Peer Folder

Press the›/‚ buttons to select the desired folder, then

press ENTER.

- To select the Sub-Folder

Press the ›/‚ buttons to select the desired folder,

then press ENTER.

Root

Clips Menu for

MP3/WMA/JPEG/CD Audio

WMA

JPEG

CD Audio or discs with MP3/WMA/JPEG contain

individual songs and/or pictures that can be orga-

nized into folders as shown below. They are similar

to how you use your computer to put files into differ-

ent folders.

MP3

Parent Folder

MUSIC

Current Folder

1st

Sub-Folders

2nd

S t o p

SONG FILE

Off

Peer Folders

Open the disc tray.

Place the disc on the

tray.

00:00:00

W M A

J P E G

M P 3

SONG FILE

Close the tray.

MP3/WMA/CD Audio Playback

The tray closes and this

screen displays.

Enter

Return

1. Open the disc tray. Place the disc on the tray. Close the tray.

- Only one kind of file is played back when a disc or a

folder contains both MP3 and WMA files.

: Name of currently playing file.

: Current Playback Time.

2. Press the ›/‚ buttons to select a song file.

Press ENTER to begin playback of the song file.

: Current Playback Mode : There are four

P l a y

Off

00:00:23

B e c a u s e Yo u

. . .

modes. They can be selected in order by

pressing the REPEAT button.

B e c a u s e Yo u

C a c t u s

- Off: Normal Playback

S a d D a y u

Wo n d e r f u l

- Track: Repeats the current track.

- Folder: Repeats the current folder

- Random: Files in the disc will be played in

random order.

REPEAT

Repeat

Enter

Return

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat/Random Playback

- Important:

The above recommendations cannot be taken as a guaran

tee that the DVD player will play MP3 recordings, or as an

assurance of sound quality. You should note that certain

technologies and methods for MP3 file recording on CD-Rs

prevent optimal playback of these files on your DVD player

(degraded sound quality and in some cases, inability of the

player to read the files).

Press the REPEAT button to change the playback mode. There

are four modes, such as Off, Track, Folder and Random.

- Off: Normal Playback

- Track: Repeats the current song file.

- Folder: Repeats the song files which have the same

extension in the current folder.

- Random: Song files which have the same extension will be

played in random order.

- This unit can play a maximum of 500 files and 500 folders

per disc.

To resume normal play, press the CANCEL button.

CD-R MP3/WMA file

Picture CD Playback

When you record MP3 or WMA files on CD-R, please refer

to the following.

1. Select the desired folder.

- Your MP3 or WMA files should be ISO 9660 or JOLIET

format.

2. Press the ›/‚ buttons to select a Picture file in the clips

menu and then press the ENTER button.

ISO 9660 format and Joliet MP3 or WMA files are

compatible with Microsoft's DOS and Windows, and with

Apple's Mac. This format is the most widely used.

- When naming your MP3 or WMA files, do not exceed 8

characters, and enter “.mp3, .wma” as the file extension.

General name format : Title.mp3. or Title.wma. When

composing your title, make sure that you use 8 characters or

less, have no spaces in the name, and avoid the use of

special characters including: (.,/,\,=,+).

3. Press the INFO button on the remote control to select the

menu you want to view and then press the ENTER button.

ENTER RETURN

Note

- Use a decompression transfer rate of at least 128 Kbps

when recording MP3 files.

- Press the STOP button to return to the clips

menu.

Sound quality with MP3 files basically depends on the rate of

compression/decompression you choose. Getting CD audio

sound requires an analog/digital sampling rate, that is

conversion to MP3 format, of at least 128 Kbps and up to 160

Kbps. However, choosing higher rates, like 192 Kbps or more,

only rarely give better sound quality. Conversely, files with

decompression rates below 128 Kbps will not be played

properly.

- When playing a Kodak Picture CD, the unit

displays the Photo directly, not the clips menu.

Rotation

Each time the ENTER button is pressed, the

picture rotates 90 degrees clockwise.

Zoom

: Press the ›/‚ or ¥/Š buttons to select the part of

the screen you want to zoom in on.

Press the ENTER button. Each time the ENTER but-

ton is pressed, the picture is enlarged up to 2X.

- Use a decompression transfer rate of at least 64Kbps

when recording WMA files.

Sound quality with WMA files basically depends on the rate of

compression/decompression you choose.

Slide Show

Getting CD audio sound requires an analog/digital sampling

rate, that is conversion to WMA format, of at least 64Kbps

and up to 192Kbps. Conversely, files with decompression

rates below 64Kbps or over 192Kbps will not be played

properly.

•

: The unit enters slide show mode.

• Before beginning the Slide Show, the picture interval must

be set.

•

: When this icon is selected and ENTER is

pressed, the pictures change automatically

with about a 6 second interval.

- Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected to

prevent illegal copying. These files are of the following types:

Windows Media^TM(registered trade mark of Microsoft Inc) and

SDMI^TM(registered trade mark of The SDMI Foundation). You

cannot copy such files.

: The pictures change automatically with

about a 12 second interval.

: The pictures change automatically with

about a 18 second interval.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENTER RETURN

TIMER:

KARAOKE FUNCTIONS

Karaoke Functions

Note

- Depending on a file size, the amount of time

between each picture may be different from the

manual.

- If you don’t press any button, the slide show will

start automatically in about 10 seconds by

default.

Operation Sequence

1. Connect the Mixed Audio Out terminals with the TV or

Amplifier. (see page 9 to 13)

2. Connect Mic into Mic jack. When a MIC is connected, the

karaoke functions can be used.

MP3 - JPEG Playback

You can play JPEG using music as a backgound.

1. Press the ›/‚ buttons to select an MP3 file in the clips

menu and then press the ENTER button.

2. Press the ›/‚ buttons to select a JPEG file in the

clips menu and then press the ENTER button.

- Music will play from the beginning

Key Control

3. Press Stop button when you want to stop the

playback.

1. Playback the Karaoke Disc containing the wanted songs.

Press the KARAOKE button.

Note

MP3 and JPEG files have to be on the same disc.

2. Press the ¥/Š buttons to change the desired tone.

CD-R JPEG Discs

- Only files with the “.jpg” and “.JPG” extensions can be played.

- If the disc is not closed, it will take longer to start playing and

not all of the recorded files may be played.

Note

- Only CD-R discs with JPEG files in ISO 9660 or Joliet format

can be played.

- If you hear feedback(squealing or howling) while

using the karaoke feature, move the microphone

away from the speakers or turn down the

microphone volume or the speaker volume.

- When playing MP3, WMA, DTS and LPCM disc,

the karaoke functions will not operate.

- When the MIC is connected, Digital Out does not

work.

- The name of the JPEG file may not be longer than 8

characters and should contain no blank spaces or special

characters (. / = +).

- Only a consecutively written multi-session disc can be played.

If there is a blank segment in the multi-session disc, the disc

can be played only up to the blank segment.

- A maximum of 3000 images can be stored on a single CD.

- Kodak Picture CDs are recommended.

- If the MIC is connected in VCD 2.0, Playback is

selected to Menu off mode automatically.

- The MIC sound outputs only from Analog Audio

Out.

- When playing a Kodak Picture CD, only the JPEG files in the

pictures folder can be played.

- Kodak Picture CD: The JPEG files in the pictures folder can

be played automatically.

- Konica Picture CD: If you want to see the Picture, select the

JPEG files in the clips menu.

- Fuji Picture CD: If you want to see the Picture, select the

JPEG files in the clips menu.

- QSS Picture CD: The unit may not play QSS Picture CD.

- If the number of files in 1 Disc is over 500, only 500 JPEG

files can be played.

- If the number of folders in 1 Disc is over 500, only JPEG

files in 500 folders can be played

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up the Language

Features

CHANGING SETUP

If you set the player menu, disc menu, audio and subtitle

language in advance, they will come up automatically every

time you watch a movie.

Using the Setup Menu

Using the Player Menu Language

1. With the unit in Stop mode, press the MENU button.

The Setup menu lets you customize your DVD player by

allowing you to select various language preferences, set up

a parental level, even adjust the player to the type of

television screen you have.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

3. Press the ›/‚ buttons to select Language Setup, then

press the or ENTER button.

4. Press the ›/‚ buttons to select Player Menu, then press

the or ENTER button.

5. Press the ›/‚ buttons to select the desired language,

then press the or ENTER button.

1. With the unit in Stop mode, press the MENU button on the

remote control. Use the ›/‚ buttons to select Setup, then

press the

or ENTER button.

- The language is selected and the screen

returns to Language Setup menu.

Language Setup

Audio Setup

- To make the setup menu disappear, press the MENU

Display Setup

Parental Setup :

button.

LANGUAGE SETUP

Setup

MMenu

English

Enter

Return

Disc Menu

Audio

^{: E}WⁿO^gÐ^lisd ^hŽ

: English

Subtitle

: Automatic

Language Setup: Setup of the Language.

Audio Setup : Setup of the Audio Options.

❶

❷

❸

Setup

Display Setup : Setup of the Display Options. Use to

select which type of screen you want to

watch and several display options.

Return

Enter

Using the Disc Menu Language

Parental Setup : Setup of the Parental Level. Allows

users to set the level necessary to

❹

This function changes the text language only on the disc

menu screens.

prevent children from viewing unsuitable

movies such as those with violence,

adult subject matter, etc.

1. With the unit in Stop mode, press the MENU button.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

3. Press the ›/‚ buttons to select Language Setup, then

2. Press the ›/‚ buttons to access the different features.

Press the or ENTER button to access the sub features.

press the

4. Press the ›/‚ buttons to select Disc Menu, then press

the or ENTER button.

5. Press the ›/‚ buttons to select the desired

then press the or ENTER button.

or ENTER button.

3. To make the setup screen disappear after setting up, press

the MENU button again.

language,

Note

- If the selected language is not recorded on the disc,

the original pre-recorded language is selected.

- The language is selected and the screen returns to

Language Setup menu.

Depending on the disc, some Setup Menu selec-

tions may not work.

- To make the setup menu disappear, press the MENU

button.

LANGUAGE SETUP

Player Menu

Disc Menu

Audio

: English

English

Français

Deutsch

Español

Subtitle

: English

Italiano

Nederland

Setup

Enter

Return

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up the Audio

Options

Using the Audio Language

1. With the unit in Stop mode, press the MENU button.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

Audio Options allows you to setup the audio device

and sound status settings depending on the audio

system in use.

3. Press the ›/‚ buttons to select Language Setup, then

press the or ENTER button.

4. Press the ›/‚ buttons to select Audio, then press the

1. With the unit in Stop mode, press the MENU button.

or ENTER button.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

5. Press the ›/‚ buttons to select the desired language, then

press the or ENTER button.

3. Press the ›/‚ buttons to select Audio Setup, then press

the or ENTER button.

4. Press the ›/‚ buttons to select the desired item, then

press the or ENTER button.

- Select “Original” if you want the default soundtrack

language to be the original language the disc is

recorded in.

- If the selected language is not recorded on the disc, the

original pre-recorded language is selected.

- The language is selected and the screen returns to

Language Setup menu.

Language Setup

Audio Setup

Display Setup

Parental Setup :

- To make the setup menu disappear, press the MENU

button.

LANGUAGE SETUP

Setup

Enter

Return

Player Menu

Disc Menu

: English

Original

English

Français

Deutsch

: English

Español

AUDIO SETUP

Subtitle

Italiano

Dolby Digital Out

MPEG-2 Digital Out

DTS

:PCM

:Off

Setup

Enter

Return

Dynamic Compression :On

PCM Down Sampling :On

Setup

Using the Subtitle Language

Enter

Return

1. With the unit in Stop mode, press the MENU button.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

❶

❷

❸

Dolby Digital Out

- PCM : Converts to PCM(2CH) audio.

3. Press the ›/‚ buttons to select Language Setup, then

press the or ENTER button.

- Bitstream : Outputs Dolby Digital via the digital output.

Select Bitstream when connecting to a Dolby Digital

Decoder.

4. Press the ›/‚ buttons to select Subtitle, then press the

or ENTER button.

5. Press the ›/‚ buttons to select the desired language,

MPEG-2 Digital Out

then press the

or ENTER button.

- PCM : Converts to PCM(2CH) audio.

- Bitstream : Converts to MPEG-2 Digital Bitstream

(5.1CH or 8CH). Select Bitstream when using the

Digital Audio Output.

- Select “Automatic” if you want the subtitle language to

be the same as the language selected as the audio

language.

DTS

- Some discs may not contain the language you select

as your initial language; in that case the disc will use its

original language setting.

Select On when connecting to a DTS Decoder.

- Off : Doesn’t output digital signal.

- On : Outputs DTS Bitstream via digital output.

- The language is selected and the screen returns to

setup menu.

Note

- To make the setup menu disappear, press the MENU

• There is no analog audio output when you play

a DTS sound disc.

button.

LANGUAGE SETUP

Player Menu

Disc Menu

Audio

: English

Automatic

English

Français

Deutsch

Subtitle

: English

Español

Italiano

Setup

Enter

Return

Download from Www.Somanuals.com. All Manuals Search And Download.

❹

❺

Dynamic Compression

TV Aspect

❶

Depending on a type of television you have, you may

want to adjust the screen setting (aspect ratio).

- On : To select dynamic compression.

- Off : To select the standard range.

- 4:3 Letter Box : Select when you want to see the total

16:9 ratio screen DVD supplies, even though you

have a TV with a 4:3 ratio screen. Black bars will

appear at the top and bottom of the screen.

PCM Down Sampling

- On : Select this when the Amplifier connected to the

player is not 96KHz compatible. In this case, the

96KHz signals will be down converted to 48KHZ.

- Off : Select this when the Amplifier connected to the

player is 96KHz compatible. In this case, all signals will

be output without any changes.

- 4:3 Pan&Scan : Select this for conventional size TVs

when you want to see the central portion of the 16:9

screen. (Extreme left and right side of movie picture

will be cut off.)

- 16:9 Wide : You can view the full 16:9 picture on your

wide screen TV.

Note

Even when PCM Down sampling is Off

• Some discs will only output down sampled

audio through the digital outputs.

• To make the Setup menu disappear, press the

MENU button.

DISPLAY SETUP

TAVspAescpteRcattio

Still Mode

: 16:9 Wide

4:3 Letter Box

√

: Auto

4:3 Pan&Scan

Screen Messages : On

16:9 Wide

: On

Black Level

TV System

: PAL

Video Output

S-Video

Setup

Enter

Return

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby

Laboratories.

Still Mode

❷

These options will help prevent picture shake in still

mode and display small text clearer.

- Auto : When selecting Auto, Field/Frame mode will be

automatically converted.

“DTS” and “DTS Digital Out” are trade-

marks of Digital Theater Systems, Inc.

- Field : Select this feature when the screen shakes in

the Auto mode.

- Frame : Select this feature when you want to see

small letters more clearly in the Auto mode.

Setting Up the Display

Options

Screen Messages

Use to turn on-screen messages On or Off.

❸

❹

Black Level

Adjusts the brightness of the screen.(On or Off) It does

Display options enable you to set various video

functions of the player.

not function in Progressive mode.

1. With the unit in Stop mode, press the MENU button.

TV System

- NTSC : In case of using NTSC disc

❺

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

• If your TV system only has PAL-Video input, you must

choose “PAL”. When you choose “PAL”, Interlace out-

put format is PAL 60 Hz output.

3. Press the ›/‚ buttons to select Display Setup, then press

the or ENTER button.

4. Press the ›/‚ buttons to select the desired item, then

press the or ENTER button.

• If your TV system only has NTSC, input you must

choose “NTSC ”.

- PAL : In case of using PAL disc

• If your TV system only has NTSC-Video input, you

must choose “NTSC”.

Language Setup

Audio Setup

• If your TV system only has PAL input, you must

choose “PAL ”.

Display Setup

Parental Setup :

DISPLAY SETUP

Setup

Enter

Return

TV Aspect

Still Mode

: 4:3 L-Box

: Auto

Screen Messages : On

Black Level

: Off

: PAL

TV System

NTSC

Video Output

COMPOSIT/SVID

PAL

√

Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Output

Select Video Output.

➏

3. Press the ›/‚ buttons to select Parental Setup, then

press the or ENTER button.

- S-Video : Select when you want to use Video and

S-Video Out.

Language Setup

Audio Setup

- Component (I-SCAN) : Select when you want to use

Component Interlace (625i/525i) Out.

Display Setup

Parental Setup :

- Component (P-SCAN) : Select when you want to use

Component Progressive (625p/525p) Out.

Setup

• If the Yes/No selection in the Display Setup sub Menu

is not made within 10 seconds, the screen returns to

the previous menu.

Enter

Return

4. Press the ›/‚ buttons to select Rating Level, then press

the or ENTER button.

DISPLAY SETUP

PARENTAL SETUP

TV Aspect

Still Mode

: 4:3 L-Box

: Auto

Rating level

Change Password

: Kids Safe

Screen Messages : On

Black Level

: On

S-Video

√

TV System

: PAL

I -SCAN

Video Output

:PC-SOCMAPNOSIT/SVID

Setup

Enter

Return

Enter

Return

• Consult your TV User’s Manual to find

out if your TV supports Progressive Scan. If

Progressive Scan is supported, follow the TV

User’s Manual regarding Progressive Scan

settings in the TV’s menu system.

5. Enter your password.

- By default, password is set to 0000.

PARENTAL SETUP

• If Video Output is set incorrectly, the screen

may be blocked.

Rating Level

: Kids Safe

Change Password

Enter Password

Setting Up the Parental

Control

Setup

Enter

Return

The Parental Control function works in conjunction

with DVDs that have been assigned a rating, which

helps you control the types of DVDs that your family

watches. There are up to 8 rating levels on a disc.

6. Press the ›/‚ buttons to select the Rating Level you want,

then press the or ENTER button.

e.g) Setting up in Kids Safe.

Setting Up the Rating Level

PARENTAL SETUP

RRaattiinnggLLeevveell

Change Password

: Kids Safe

Kids Safe

√

1. With the unit in Stop mode, press the MENU button.

Level 2

Level 3

Level 4

Level 5

Level 6

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

Setup

Enter

Return

Language Setup

Audio Setup

Note:

Display Setup

Parental Setup :

- For example, if you select up to Level 6, discs

that contain Level 7,8 will not play.

Setup

•

To make the setup menu disappear, press the

MENU button.

Enter

Return

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Password

PARENTAL SETUP

Rating Level :Kids Safe

Change Password

Enter New Password

1. With the unit in Stop mode, press the MENU button.

2. Press the ›/‚ buttons to select Setup, then press the

or ENTER button.

Setup

Enter

Return

Language Setup

Audio Setup

Note

If you have forgotten your password, see

“Forgot Password” in the Troubleshooting Guide.

Display Setup

Parental Setup :

Setup

Enter

Return

3. Press the ›/‚ buttons to select Parental Setup, then

press the or ENTER button.

Language Setup

Audio Setup

Display Setup

Parental Setup :

Setup

Enter

Return

4. Press the ›/‚ button to select Change Password, then

press the or ENTER button. Enter your password (default

password). Enter the new password.

PARENTAL SETUP

Rating Level

Change Password

:Kids Safe

Setup

Enter

Return

PARENTAL SETUP

Rating Level

:Kids Safe

Change Password

Enter Password

Setup

Enter

Return

Download from Www.Somanuals.com. All Manuals Search And Download.

REFERENCE

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Page

Action

Problem

• Check the batteries in the remote control.

They may need replacing.

No operations can be

performed with the

remote control.

• Operate the remote control at a distance of no more than 20 feet.

• Remove batteries and hold down one or more buttons for several minutes to drain

the microprocessor inside the remote control to reset it. Reinstall batteries and try

to operate the remote control again.

• Ensure that the disc is installed with the label side facing up.

• Check the region number of the DVD.

Disc does not play.

• 5.1channel sound is reproduced only when the following conditions are met :

1) The DVD player is connected with the proper Amplifier

P 14

5.1 channel sound is

not being reproduced.

2) The disc is recorded with 5.1 channel sound.

• Check whether the disc being played has the “5.1 ch” mark on the outside.

• Check if your audio system is connected and working properly.

• In SETUP Menu, is the Audio Output set to Bitstream?

P25~26

• The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.

The

on screen.

icon appears

2. The DVD’s software doesn’t support the feature (e.g., angles).

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is out of range.

Disc Menu doesn’t appear.

• Check if the disc has a Menu.

Play mode differs from the

Setup Menu selection.

• Some of the functions selected in the Setup Menu may not work properly if the

disc is not encoded with the corresponding function.

P24~28

The screen ratio

cannot be changed.

• The Screen Ratio is fixed on your DVDs.

P26~27

P25~26

• Make sure you have selected the correct Digital Output in the Audio Options

Menu.

No audio.

•

Press the

button (on front panel) for more than 5 seconds under no disc

The screen is blocked

P15

P27

inside. All settings will revert to the factory settings.

• Press the

button

for more than 5 seconds under no disc

(on front panel )

Forgot password