Samsung Cell Phone E340 User Guide

* Depending on the software installed or your service provider, some of the descriptions in this

manual may not match from your phone.

* Depending on your country, your phone and accessories may appear different from the

illustrations in this manual.

SAMSUNG ELECTRONICS

Printed in Korea

Code No.:GH68-07077A

English. 07/2005. Rev 1.2

World Wide Web

http://www.samsungmobile.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Download from Www.Somanuals.com. All Manuals Search And Download.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 89.

Key in the emergency number for your present

location, then press

Download from Www.Somanuals.com. All Manuals Search And Download.

About this Guide

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

MP3 player

Play MP3 music files on your

phone.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Get personal with photo caller

See who’s calling you when the

phone displays their very own

photo displays.

•

Multimedia message service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

E-mail

Send and receive e-mails with images, video, and

audio attachments.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

•

Java

Enjoy Java™-based embedded

games and download new games.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

WAP browser

Access the wireless web and access

various services and current

information.

Voice recorder

Record memos or sounds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Play games.......................................................... 16

Use Phonebook .................................................... 17

Browse the web ................................................... 18

Send messages.................................................... 19

View messages .................................................... 20

Use Bluetooth...................................................... 21

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

ABC, T9, Number, and Symbol mode

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, music, and other special features

Index

Use camera......................................................... 14

Play MP3s ........................................................... 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀp.30

3 Applications

ꢀp.36

5 Messages

ꢀ

p.47

8 Camera

ꢀp.70

1 All calls

ꢀ

p.30

p.31

p.32

1 MP3 player

2 Voice recorder

3 Java world

4 World time

5 Alarm

6 Calculator

7 Converter

8 Timer

ꢀ

p.36

p.38

p.39

p.41

p.42

p.43

p.44

1 Create new message

2 My messages

3 Templates

4 Delete all

5 Settings

6 Broadcast messages

7 Memory status

ꢀ

p.47

p.50

p.56

p.61

1 Take a photo

2 Record video

3 Photos

4 My photos

5 Video clips

6 My video clips

ꢀ

p.70

p.72

p.74

p.75

2 Dialled calls

3 Received calls

4 Missed calls

5 Delete all

6 Call time

ꢀ

p.76

7 Call costs^*

9 Settings

ꢀ

p.76

2 Phonebook

ꢀp.32

6 Funbox

ꢀ

p.62

1 Time & Date

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Memory status

9 Reset settings

ꢀp.76

ꢀp.77

ꢀp.78

ꢀp.79

ꢀp.80

ꢀp.83

ꢀp.85

ꢀp.86

ꢀp.87

9 Stopwatch

0 SIM-AT*

1 Contact list

2 Add new contact

3 Group

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

ꢀp.36

Images

Videos

Music

Sounds

ꢀ

p.62

p.63

p.64

4 Browser

ꢀp.44

4 Speed dial

1 Home

ꢀp.44

ꢀp.45

ꢀp.47

5 My name card

6 Own number

7 Management

8 Service number^*

2 Bookmarks

3 Go to URL

4 Clear cache

5 Profile settings

6 Current profile

Memory status

7 Organiser

ꢀ

p.65

1 Month view

2 Week view

3 Day view

ꢀ

p.65

p.67

p.68

p.69

*Shows only if supported by your

SIM card.

4 Schedule

5 Anniversary

6 Miscellaneous

7 To do

8 Missed alarm events

9 Memo

0 Memory status

Download from Www.Somanuals.com. All Manuals Search And^pD^.6o⁹wnload.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Phone

Travel Adapter

Headset jack

Navigation keys

(Up/Down/Left/

Right)

Camera

External

display

WAP access/

Confirm key

User’s Manual

Battery

Soft key (right)

Soft key (left)

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Volume keys

Dial key

Alphanumeric

keys

Correct key

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Microphone

Special

function keys

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

First steps to operating your phone

Install the battery.

Plug the travel adapter

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged, unplug the

Adapter from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

Low battery indicator

press <OK>.

use is prohibited.

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

1. Open the phone.

Switch off

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

2. Press and hold [

Download from Www.Somanuals.com. All Manuals Search And Download.

Keys and display

End a call.

Hold down to switch the phone on and

off.

Perform the function indicated on the

bottom line of the display.

In Menu mode, cancel input and return

the phone to Idle mode.

In Idle mode, access menu options

directly.

Enter numbers, letters, and some

special characters.

•

Up: Camera

Left/Right/Down: your favourite

In Idle mode, hold [1] down to access

menusꢀp. 77

your voice mail server. Hold [

make an international call.

0] down to

In Menu mode, scroll through the menu

options.

Enter special characters.

In Idle mode, launch the Wireless

Application Protocol (WAP) browser.

Hold [

]

down to activate or deactivate

Quiet mode. Hold [

pause.

]

down to enter a

In Menu mode, select the highlighted

menu option.

Adjust the phone volume.

Delete characters from the display.

In Idle mode, with the phone open,

adjust the keypad tone volume. With

the phone closed, hold down to turn on

the backlight.

Send or answer a call.

(on the left)

In Idle mode, retrieve the recent

numbers dialled, missed, or received.

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Display

Icons

(continued)

New message

Layout

New multimedia message

New e-mail message

New voice mail

Icons

display various icons.

Text and graphics

display messages,

instructions, and

Call diverting feature is active

Bluetooth feature is active

information you enter.

Connected to hands-free or

headset

Soft key function

indicators

show the current functions

assigned to the two soft.

Contacts

Roaming network

Home Zone, if you have

registered for the appropriate

service

Icons

Received signal strength

Call in progress

Quiet mode is active

Out of your service area; you

cannot send or receive calls

Call ringer set to vibrate

Battery power level

ꢀp. 80

Alarm set

Download from Www.Somanuals.com. All Manuals Search And Download.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

Contacts

4. To exit, choose either of the

following methods.

•

Press <Back> or [

move up one level.

C] to

•

Press [ ] to return to Idle

mode.

Press the right soft

key to access

Contact list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

Use shortcuts Press the number key

corresponding to the option you

want.

Download from Www.Somanuals.com. All Manuals Search And Download.

Get started

Customise your phone

You can set a wallpaper for the idle

screen.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings

settings Language

2. Select a language.

→

Phone

language

and select Settings

settings

→

Display

→

Wallpaper

2. Select an image category.

1. In Idle mode, press <Menu

3. Scroll to an image by pressing

[Left] or [Right].

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

→

Incoming call

→

4. Press <Save>.

2. Select a ringer category.

3. Select a ringer melody.

4. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

Download from Www.Somanuals.com. All Manuals Search And Download.

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

You can protect the phone against

unauthorised use with a phone

password.

Quiet mode

Phone lock

Press and hold

[

]

in Idle mode.

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

You can use Left, Right, and Down

keys as shortcut keys to access

specific menus directly from Idle

mode.

shortcuts

“00000000” and press <OK>.

To change a shortcut menu:

3. Enter a new 4- to 8-digit

password and press <OK>.

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

3. Press <Options> and select

Change

→

4. Enter the new password again

→

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

4. Select a menu to be assigned to

the key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Make/Answer calls

Step outside the phone

Begin with your camera, music, and other special features

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

Use camera

[

1. Open the phone.

Take a photo

[

2. In Idle mode, press [

on the camera.

]

to turn

1. When the phone is ringing, press

Answer a call

[

3. Rotate the camera lens, aim it at

the subject and adjust the image.

2. To end the call, press

[

Press [ ].

Adjust the

volume during

a call

4. Press

[

]

to take a photo. The

photo is saved automatically.

5. Press [ ] to take another photo.

Download from Www.Somanuals.com. All Manuals Search And Download.

Play MP3s

1. In Idle mode, press <Menu> and

select Camera Photos or My

photos

2. Select the photo you want.

View a photo

→

Use these methods:

Copy MP3 files

to the phone

•

Download from the wireless

web p. 44

ꢀ

•

Download from a computer

using Samsung PC Studio II

1. In Idle mode, press

on the camera.

[

] to turn

Record a video

ꢀSamsung PC Studio II User’s

2. Press [1] to switch to Record

Guide

mode.

•

Receive via Bluetooth

ꢀp. 85

3. Press

4. Press

[

]

to start recording.

[

to stop recording. The

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to list Add all or Add a

file

Create a play

list

video is saved automatically.

→

5. Press [ ] to record another video.

→

1. In Idle mode, press <Menu

and select Camera Video

clips or My video clips

2. Select the video you want.

Play a video

→

3. For Add a file, select a file and

press <Add>. Repeat from step

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Play games

1. From the MP3 player screen,

press [ ].

Play MP3 file

1. In Idle mode, press <Menu

and select Applications

Java world Downloads

Forgotten Warrior

or Arch Angel

Select a game

2. During playback, use the

following keys:

→

Freekick,

•

[

]: pauses/resumes

playback.

[Left]: goes back to the

previous file.

[Right]: skips to the next

file.

[Up]: opens the play list.

[Down]: stops playback.

2. Press any key once or twice to

launch the game.

1. Press <PLAY> and select START

GAME

2. Press <SKIP>.

Play Forgotten

Warrior

•

[

]: adjusts the volume.

1. Select Game

you want a team

2. Press ].

→

the game mode

Play Freekick

→

a player.

[

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Select NEW GAME

→

a game

To the SIM card

Play Arch Angel

mode

1. In Idle mode, enter a phone

2. Press <NEXT>, <PLAY>, and

then <NEXT> until the game

starts, or <SKIP> to start the

game immediately.

number and press <Save>.

2. Select SIM

3. Enter a name.

4. Press [ ] to save the entry.

3. Press <START>.

1. In Idle mode, press

Use Phonebook

Find an entry

<Contacts>.

2. Select an entry.

To the phone’s memory

Add an entry

3. Select a number and press

1. In Idle mode, enter a phone

[

]

to dial, or press

number and press <Save>.

Options> to access options.

2. Select Phone

→

a number type.

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Notes.

4. Press [ ] to save the entry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

Browse the web

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

Using a built-in WAP (Wireless Access Protocol)

browser, you can get easy access to the wireless web

to get a variety of up-to-date services and information

and to enjoy downloads of web content.

→

2. Specify your contact

information.

3. Press <Save> to save the

In Idle mode, press [ ].

Launch the

browser

name card.

4. To send the name card to other

people, press <Options> and

•

To scroll through browser items,

press the Navigation keys.

Navigate with

the WAP

browser

select Send

→

the sending

method you want.

•

To select an item, press < >.

To return to the previous page,

press <Back> or [C].

•

To access browser options,

press <Menu> and select

Download from Www.Somanuals.com. All Manuals Search And Download.

Send messages

4. Select Picture & Video or

Sound and add a media file.

1. In Idle mode, press <Menu

Send a text

message (SMS)

5. Select Message

and select Messages

new message Text

message

→

Create

→

6. Enter the message text and

press [ ].

2. Enter the message text.

3. Press [ ].

7. Press <Options> and select

Send

8. Enter destination numbers.

4. Enter destination numbers.

9. Press [ ] to send the message.

5. Press [ ] to send the message.

1. In Idle mode, press <Menu

and select Messages Create

new message Multimedia

message

2. Select Subject

Send an e-mail

Send a

and select Messages

→

Create

→

multimedia

message

(MMS)

new message

→

2. Select Subject

3. Enter the e-mail subject and

press [ ].

3. Enter the message subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

[

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

6. Select File attach

From the Inbox:

Send an e-mail

(continued)

7. Add image, video, music, or

sound files.

1. In Idle mode, press <Menu>

and select Messages

messages Inbox

2. Select a text message.

→

8. Press <Options> and select

Send

9. Enter e-mail addresses.

When a notification appears:

View a

multimedia

message

10.Press [ ] to send the e-mail.

1. Press <View>.

View messages

2. Press <Options> and select

Retrieve

When a notification appears:

View a text

message

3. Select a message from the

Inbox.

1. Press <View>.

From the Inbox:

2. Select a message from the

Inbox.

1. In Idle mode, press <Menu

and select Messages

messages Inbox

2. Select a multimedia message.

→

Download from Www.Somanuals.com. All Manuals Search And Download.

Use Bluetooth

1. In Idle mode, press <Menu

and select Messages My

messages Email box

2. Select an account.

View an e-mail

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

→

3. Press <Select> when Check

new mail is highlighted to

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

→

retrieve an e-mail or a header.

→

4. Select an e-mail or a header.

5. If you selected a header, press

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

Options> and select

→

Retrieve

→

Search new device

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step outside the phone

1. Access an application.

2. Scroll to an item.

Send data

3. Press <Options> and select

Send

→

via Bluetooth.

4. Select a device.

5. If necessary, enter the

Bluetooth PIN and press <OK>.

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

If necessary, press <Yes> to

confirm the reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

ABC, T9, Number, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using ABC mode,

T9 mode, Number mode, and Symbol mode.

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press and hold [ ] to switch between T9 mode and

ABC mode.

Press [ ] to change case or switch to Number

mode.

Press and hold [ ] to switch to Symbol mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter text

2. Enter the whole word before editing or deleting

characters.

Tips for using ABC mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press [Left] or [Right] to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press [Left] or [Right] to move the cursor.

Entering a word in T9 mode

Press [

C] to delete characters one by one. Press

and hold [

] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Spell appears on the bottom line.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press <Spell>.

Call functions

4. Enter the word you want using ABC mode and

press <OK>.

Advanced calling features

Using Number mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [ ].

• Press

to clear the whole display. You can move the

cursor to edit an incorrect digit.

[

]

to clear the last digit or press and hold

Using Symbol mode

Symbol mode enables you to insert symbols.

[C]

• Press and hold

numbers.

[

] to enter a pause between

Press

display more symbols

select a symbol

[Up] or [Down].

Making an international call

1. In Idle mode, press and hold [

appears.

the corresponding

number key.

0]. The

character

clear the entered symbol(s)

insert the symbol(s)

[C].

2. Enter the country code, area code, and phone

number, then press [ ].

<OK>.

Download from Www.Somanuals.com. All Manuals Search And Download.

Call functions

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

2. Scroll to the number you want and press [ ].

Press <Accept> or [ ] to answer the call.

Making a call from Phonebook

Tips for answering a call

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

Phonebook.ꢀp. 32

<Reject> or [ ].

ꢀp. 77

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

•

When Active folder in the Extra settings menu

is active, you can simply open the phone.

ꢀp. 78

keys.

ꢀp. 34

Press <Reject> or [ ] to reject a call.

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

2. Find the number your want.

3. Press <Dial> or [ ] to dial the number you want.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Ending a call

Close the phone or press [ ].

Download from Www.Somanuals.com. All Manuals Search And Download.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the right side of

the phone.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

The buttons on the headset work as listed below:

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [ ].

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Options during a call

You can access a number of functions during a call.

activated the call waiting feature.

ꢀp. 81

Adjusting the volume during a call

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Use [

] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

2. Press <Swap> to switch between the calls.

Download from Www.Somanuals.com. All Manuals Search And Download.

Call functions

3. Press <Options> and select End held call to end

Switching off the microphone (Mute mode)

the call on hold.

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

4. To end the current call, press [ ].

Transferring a call

Press <Options> and select Mute or Unmute

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Using the voice clarity feature

This feature removes extraneous noise and increases

call quality so that the person with whom you are

speaking can hear you clearly even if you are in a

noisy place.

Press <Options> and select Transfer

Using a Bluetooth headset

Press <Options> and select Voice clarity on or

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

Voice clarity off

Muting or sending key tones

You can turn the key tones off or on.

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 83

Press <Options> and select Mute keys or Send

keys

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sending a sequence of DTMF tones

Using SIM services

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

For details, see your SIM card instructions or contact

your service provider.

Making a multi-party call

1. When connected with a teleservice system, press

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Your service provider must support multi-party calls

for you to use this feature.

Using Phonebook

You can access the Phonebook menu to locate or

store entries.

Setting up a multi-party call

1. Call the first participant.

ꢀp. 32

2. Call the second participant. The first call is

automatically put on hold.

Press <Options> and select Phonebook

3. Press <Options> and select Join. The first

Using the message service

You can access the Messages menu to read an

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

incoming message and send a new message.

Press <Options> and select Message

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Press <Options> and select Join

Menu functions

6. Repeat steps 4 and 5 as desired.

All menu options listed

Having a private conversation with one

participant

Call records (Menu 1)

1. Press <Options> and select Private

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

2. Select a name or number from the participant list.

You can talk privately with that person, while the

other participants converse with each other.

To access this menu, press <Menu> in Idle mode and

3. To return to the multi-party call, press <Options

select Call records

and select Join

Dropping one participant

1. Press <Options> and select Remove

All calls (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

3. Close the phone or press [ ] to end the multi-

party call.

3. Press [ ] to view the details of a call, or [ ] to

dial a number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using call record options

Missed calls (Menu 1.4)

While viewing the call list, press <Options> to access

the following options:

This menu displays the most recent calls that you did

not answer.

•

Details: display the details of the selected call.

Delete all (Menu 1.5)

Call back: dial the number.

Use this menu to delete all of the records in each call

type.

Paste: paste the phone number into the normal

dialling screen.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

•

Send message: send an SMS or MMS message.

Delete: delete the selected call record.

Delete all: delete all call records.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

Dialled calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the most recent calls you have

dialled.

Received calls (Menu 1.3)

•

Last call time: check the length of your last call.

This menu displays the most recent calls you have

received.

Total sent: check the total length of all the calls

you have dialled.

•

Total received: check the total length of all the

calls you have received.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Reset timers: reset the call timers. You need to

enter the phone password.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

The password is preset to 00000000. You can

change this password.

ꢀp. 86

Call costs (Menu 1.7)

To access this menu, press <Menu> in Idle mode and

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Last call cost: check the cost of your last call.

Press <Contacts> in Idle mode to quickly access

this menu.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

•

Max cost: check the maximum cost limit set in

Set max cost

2. Select the name you want from the list.

•

Reset counters: reset the cost counters.

3. Press [ ] to dial the number, or <Options> to

Set max cost: set the maximum cost authorised

for your calls.

access Phonebook options.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Mobile

number in any category.

Email: assign an e-mail address.

Graphic ID: assign an image as a caller ID

image to alert you to a call from the number.

Alert: assign a ringer melody to alert you to a

call from the number.

Group: assign the number to a caller group.

Notes: add a memo about the person.

/Home/Office/Fax/Other: add a

Using Phonebook options

While viewing the contact list or contact details, press

•

Options> to access the following options:

View: display details about the contact.

Edit: edit the contact information.

•

Send message: send an SMS or MMS message.

•

Copy: copy the contact to the phone’s memory or

the SIM card.

•

Send: send the contact via SMS, MMS, e-mail, or

Bluetooth.

3. Press <Save> to save the contact.

Storing a number on the SIM card

Delete: delete the selected contact.

1. Select SIM

Add new contact (Menu 2.2)

2. Enter a name and press [Down].

3. Enter a phone number.

Use this menu to add a new contact to Phonebook.

4. Press [Down] and change the location number, if

necessary.

Storing a number in the phone’s memory

1. Select Phone

5. Press <Save> to save the contact.

2. Change the settings or enter information about the

contact.

•

First name/Last name: assign a name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Group (Menu 2.3)

Speed dial (Menu 2.4)

Use this menu to organise your contacts in caller

groups.

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

Adding members to a caller group

Assigning speed dial numbers

1. Select a group.

1. Select a key location from

for your voice mail server.

9. Key

is reserved

2. Press <Add>. The list of contacts stored in your

phone’s memory is displayed.

2. Select a contact you want from the contact list.

3. Scroll to a contact and press <Select>.

3. Select a number from the contact, if it has more

than one number.

4. To add more members, press <Options> and

select Add

→

a contact.

4. Press <Select>.

5. Repeat step 4 as desired.

Managing speed dial entries

Managing caller groups

From the Speed dial screen, press <Options> to

access the following options:

While viewing the group list, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

•

View: display the members of the selected group.

Add: add a new group.

Change: assign a different number to the

assigned key.

•

Remove: clear the speed dial settings for the

selected key.

Edit: change the properties of the selected group.

Delete: delete the selected group. Group

members, however, are not deleted from

Phonebook.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

My name card (Menu 2.5)

Own number (Menu 2.6)

Use this menu to create a name card and send it to

other people.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

Management (Menu 2.7)

phone’s memory.ꢀp. 33

Use this menu to manage Phonebook.

Using name card options

•

Default saving: select a default memory location

to save contacts.

After saving your name card, press <Options> to

access the following options:

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

•

Edit: edit the name card.

Send: send the name card via SMS, MMS, e-mail,

or Bluetooth.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Delete: delete the name card.

1.Press [ ] to check the location(s) to be cleared.

2.Press <Delete>.

3.Press <Yes> again to confirm the deletion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

4.Enter the phone password and press <OK>.

Applications (Menu 3)

The password is preset to 00000000. You

Use this menu to play Java games, to play music files,

to record a voice memo, to set time zones and alarms,

or to use the phone as a calculator, timer, or

stopwatch.

can change this password.ꢀp. 86

•

Memory status: display the number of contacts

you have stored in Phonebook.

To access this menu, press <Menu> in Idle mode and

Service number (Menu 2.8)

select Applications

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

MP3 player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

Downloading or receiving music files

1. Scroll to the number you want and press <View>.

Use these methods to save MP3 files to your phone’s

memory:

2. Press <Dial> or [ ].

•

Download from the wireless web

ꢀp. 44

Download from a computer using the Samsung PC

Studio II programꢀSamsung PC Studio II User’s

Guide

•

Via an active Bluetooth connectionꢀp. 85

The downloaded or received files are stored in the

Music folder. p. 63

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

Creating a play list

Keys

Right

Function

Add MP3 files to the play list.

Skips to the next file.

Opens the play list.

Adjusts the volume level.

Stops playback.

1. From the MP3 player screen, press <Options

and select Add to list

2. Select either of the following options:

•

Add all: add all of the files in the phone’s

memory to the play list.

Add a file: add specific files to the play list.

Down

Using MP3 file options

3. If you selected Add a file, scroll to a file and press

Add>. Repeat from step 2.

From the MP3 player screen, press <Options> to

access the following options:

4. Press <Back> to go back to the MP3 player

•

Pause/Play: pause or resume playback.

screen.

Send: send the currently selected file via

e-mail or Bluetooth.

Playing music files

From the MP3 player screen, press [ ].

During playback, use the following keys:

•

Open play list: display the play list.

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

Keys

Function

•

Delete: delete the selected file.

Pauses or resumes playback.

Goes to the previous file.

Settings: change the default settings for playing

music files.

Left

Repeat: select a repeat mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Shuffle: set the MP3 player to play music in

random order.

Voice recorder (Menu 3.2)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Volume: select a volume level.

Lock volume key: set whether or not you use the

volume keys while playing music with the phone

closed.

Recording a voice memo

1. Press [ ] to start recording.

2. Speak into the microphone.

Press [ ] to pause or resume the recording.

•

Properties: access the properties of the file.

Accessing the play list

3. When you finish, press <Stop>. The voice memo

From the MP3 player screen, press [Up] to access the

play list.

is saved automatically.

After recording a voice memo, press <Options> to

access the following options:

Press <Options> to access the following options:

•

Play: play the currently selected file.

•

Play: play back your voice memo.

Add to list: add files to the play list.

Send: send the voice memo via MMS,

e-mail, or Bluetooth.

Move list: move the selected file to the position

you want within the play list.

•

Rename: change the name of the voice memo.

•

Remove: remove the selected file from the play

list.

Delete: delete the voice memo.

Protection: protect the voice memo from being

deleted.

Remove all: remove all files from the play list.

•

Properties: access the properties of the voice

memo.

Download from Www.Somanuals.com. All Manuals Search And Download.

Default name: change the default prefix of the

voice memo.

Playing a voice memo

1. From the Voice recorder screen, press <Options

and select Go to voice list

2. Select a voice memo. The memo plays.

On the player screen, you can use the following keys:

•

Go to voice list: go to the voice memo list.

Java world (Menu 3.3)

Use this menu to access and play Java games and to

change the network settings for accessing Java

services.

Keys

Function

Pauses or resumes playback.

Stops playback.

Using Java game options

Down

From the Java world screen, select Downloads and

press <Options> to access the following options:

Adjusts the volume.

•

Launch: launch the selected game.

Using voice recorder options

Application settings: set a game to be continued

when a call comes in or an alarm sounds during

the game. You can also set the phone to exchange

game information with the network while playing

an online game or when you need to connect to

the Internet.

From the Voice record screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Settings: change the default settings for

recording a voice memo.

Recording time: select a maximum recording

time.

•

Delete: delete the game.

Properties: view the game properties.

Volume: select a volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Playing Forgotten Warrior

Playing Arch Angel

1. From the Java world menu, select Downloads

→

1. From the Java world menu, select Downloads

→

Forgotten Warrior

Arch Angel.

2. Press any key.

3. Press <PLAY>.

3. Select NEW GAME or LOAD GAME

→

a game

mode.

4. Select START GAME or CONTINUE

4. Press <NEXT> and then <PLAY>.

5. Press <SKIP> to start a game.

5. Press <NEXT> until the game starts, or <SKIP

During a game, press

options.

OPTIONS

to access game

to start the game immediately.

During a game, press <OPTIONS> to access game

options.

Playing Freekick

1. From the Java world menu, select Downloads

Freekick

2. Press any key.

3. Select Game

team a player.

During a game, press to access game options.

→

Changing Java settings

You can change the settings for accessing Java

services.

→

the game mode you want

→

1. From the Java world menu, select Settings

→

2. Change the following settings:

[

]

•

APN: enter the access point name.

Password: enter the password.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Proxy: select whether or not you use a proxy

server to access network services. Depending

on this setting, options in Proxy settings vary.

Proxy settings: provide you with the following

options:

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

When the proxy is set to Enable

2. Press <Options> and select Save to save the

time zone.

IP address: enter the HTTP proxy address.

Port: enter the port number.

Viewing and setting a foreign time zone

When the proxy is set to Disable

1. From the world map, press [Down].

DNS1: Enter the primary DNS address.

2. Press [Left] or [Right] to select the foreign time

zone you want to view.

DNS2: Enter the secondary DNS address.

3. Press <Options> and select Save to save the

Checking memory status

time zone.

You can view the amount of total and used memory for

Java games.

Applying Daylight Savings Time

1. From the world map, press <Options> and select

From the Java world menu, select Memory status

Set daylight saving time

2. Press [ ] to check the time zone(s) you want.

World time (Menu 3.4)

3. Press <Save>.

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Press <Snooze> or any key to stop the wake-up

alarm for 5 minutes. You can do this a maximum of

five times.

Alarm (Menu 3.5)

Use this menu to set alarms to sound at specific times.

Setting an alarm

1. Select the type of alarm.

Setting the alarm to ring even if the phone is

off

2. Select On on the Alarm line and press [Down].

From the Alarm screen, select Auto power

→

On.

3. Enter the time for the alarm to sound and press

[Down].

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

4. If necessary, select AM or PM in 12-hour time

format and press [Down].

Calculator (Menu 3.6)

Your phone is preset to 24-hour time format.

You can change the time format.

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

ꢀp. 76

5. Select the days when the alarm rings.

6. Select the Alarm tone line.

7. Select an alarm melody.

1. Enter the first number.

•

Press the left soft key to insert a decimal point

or bracket.

8. Press <Save> and then <Yes>.

•

Press

[

] or [ ] to move the cursor.

Stopping an alarm

2. Press one of the Navigation keys to access the

math function you want.

When the alarm sounds, choose either of the following

options to stop the alarm.

3. Enter the second number.

•

Press <OK>.

4. Press [ ] to view the result.

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting the timer

Converter (Menu 3.7)

1. Press <Set>.

Use this menu for common conversions, such as

currency and temperature.

2. Enter the length of time you want to count down

and press <OK>.

1. Select a converter.

3. Press [ ] to start counting down.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Stopping the timer

3. Enter the value to be converted and press [Down].

•

Press any key when the timer rings.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-)

Press [ ] on the Timer screen to stop the timer

before it rings.

Stopwatch (Menu 3.9)

4. Press [Left] or [Right] to select the unit you want

to convert to.

Use this menu to measure elapsed time. The precision

of the stopwatch is one-hundredth of a second.

The equivalent value for the amount you entered

displays.

1. Press [ ] to start the stopwatch.

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

Timer (Menu 3.8)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

3. To reset the stopwatch, press <Reset>.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

SIM-AT (Menu 3.10)

Home (Menu 4.1)

This menu is available if you use a SIM AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press [ ] in Idle mode.

Navigating with the WAP browser

Press

scroll through browser items

the Navigation

keys.

Browser (Menu 4)

select a browser item

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-date

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

Using WAP page options

From any WAP page, press <Menu> and select Menu

to access the following options:

To access this menu, press <Menu> in Idle mode and

•

Back: go back to the previous page.

Home: go back to the homepage.

Exit: exit the WAP browser.

select Browser

Reload: reload the current page.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Show URL: display the URL address of the current

web page.

Using bookmark options

After saving an item, press <Options> to access the

following options:

About...: access version information for your WAP

browser.

•

Go: access the bookmarked website.

Exiting the WAP browser

Edit: edit the address and name of the bookmark.

Delete: delete the selected bookmark.

Press [ ] to exit the browser.

Bookmarks (Menu 4.2)

Go to URL (Menu 4.3)

Use this menu to save URL addresses in order to

quickly access websites.

Use this menu to manually enter the URL address of a

website and access the website.

Adding a bookmark

1. Select an empty location.

Clear cache (Menu 4.4)

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

2. Enter a name for the bookmark and press [Down].

3. Enter a URL address and press <Options> and

select Save

Profile settings (Menu 4.5)

Accessing a bookmarked page

Use this menu to set up servers for the WAP browser.

Contact your service provider for details about your

settings options.

Scroll to a bookmark item and press [ ].

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

For each server, the following options are available:

When the proxy is set to Disable

•

Profile name: assign a name to the server profile.

DNS 1: enter the primary address.

Home URL: set the address of your homepage.

DNS 2: enter the secondary address.

Bearer: select a bearer for each type of network

address accessed.

APN: enter the access point name of the GPRS

network gateway.

•

Proxy: select whether or not the phone uses a

proxy server to launch the WAP browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

Password: enter the password

•

GSM settings: customise the following GSM

network settings:

When the proxy is set to Enable

•

GPRS settings: customise the following GPRS

network settings:

PROXY IP: enter the WAP gateway address.

Proxy port: enter the port number.

Dial number: enter the PPP server phone number.

When the proxy is set to Enable

PROXY IP: enter the WAP gateway address.

Proxy port: enter the port number.

Password: enter the password.

APN: enter the access point name of the GPRS

network gateway.

Data call type: select a data call type.

When the proxy is set to Disable

DNS 1: enter the primary address.

Password: enter the password.

DNS 2: enter the secondary address.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dial number: enter the PPP server phone number.

Create new message (Menu 5.1)

Use this menu to create and send SMS, MMS, or

e-mail messages.

Password: enter the password.

Data call type: select a data call type.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

Current profile (Menu 4.6)

Use this menu to activate one of the proxy servers you

have set up.

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Messages (Menu 5)

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use WAP push message, and cell broadcast

message features.

1. Enter your message.

You can enter up to 160 standard characters, or

approximately 70 Unicode characters, such as ‘â’.

To access this menu, press <Menu> in Idle mode and

2. Press <Options> to access one of the following

select Messages

options:

•

Insert: retrieve a text template, phonebook,

or bookmark item.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Add picture

picture, animated image, or melody to the

message.

Attach: add a name card or calendar memo.

Save to: save the message to Draft, or My

animation

melody: add a

3. Select the Picture & Video or Sound line and add

an image, a video, or a sound file.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

•

folder

4. Select the Message line.

•

Language select: select the input language.

Text style: change the text attributes.

5. Enter the message text and press [ ].

6. Press <Options> to access the following options:

3. When you have finished, press <Options> and

select Save and send or Send only

•

Edit: edit the subject or text of your message.

Preview: check the message you created.

4. Enter a destination number.

Save to: save the message to Draft

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

folder, or Template

•

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

5. Press [ ] to send the message.

Multimedia message (Menu 5.1.2)

•

Delete page: delete the current page.

Edit page: set the page duration or move the

current page to the next or previous page.

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Remove subject/picture/sound/message:

clear the subject, image, sound, or text.

1. Select the Subject line.

2. Enter the message subject and press [ ].

Download from Www.Somanuals.com. All Manuals Search And Download.

7. When you have finished, press <Options> and

select Send

7. When you have finished, press <Options> to

access the following options:

8. Enter a phone number or e-mail address.

Options may vary depending on the selected

field.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

•

Edit: edit the subject or text.

View: play an added item.

Attach: add a calendar memo or a name card.

Save to: save the message in the Drafts or

My folder box.

9. Press [ ].

Email (Menu 5.1.3)

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

•

Remove subject/message: clear the subject

or text.

profile.

ꢀp. 59

•

Remove: delete the selected attachment.

Remove all attachments: delete all

attachments.

1. Select the Subject line.

2. Enter the subject of your e-mail and press [ ].

3. Select the Message line.

8. When you have finished, press <Options> and

select Send

4. Enter the e-mail text and press [ ].

5. Select the File attach line.

9. Enter an e-mail address.

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

6. Add media files. Depending on the file type or DRM

(Digital Rights Management) system, some files may

not be able to be forwarded

10.Press [ ] to send the e-mail.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Viewing a message in Inbox

My messages (Menu 5.2)

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

Use this menu to store all of the messages you have

received, sent, or tried to send.

Inbox (Menu 5.2.1)

•

SMS

This folder stores all of the messages you have

received, except for e-mails.

MMS

MMS notification;

indicates that MMS has

Viewing a message at the time of its receipt

been retrieving from the server and

indicates that MMS has been failed to

retrieve.

When a message has been received, the phone alerts

you by:

•

WAP push messages/OTA messages

Delivery report for your sent messages

•

Displaying a message icon with text notification

Sounding a tone or vibrating, depending on the

message alert setting

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

To read a message immediately, press <View> and

select a message from the Inbox.

They are indicated by

• A icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

For an MMS message, press <Options> and select

Retrieve. The message is downloaded from the MMS

server to the phone’s memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

While viewing the message list, press <Options> to

access the following options:

•

Delete: delete the message.

Move to phone/SIM: move the message

between the SIM card and the phone’s memory.

Options may vary depending on your country or

service provider.

•

Add to block list: add the number to the Block

list.

•

View: open the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Retrieve: retrieve the MMS message from the

server.

Cut media: save media content from the message

into your phone’s memory.

•

Delete: delete the message.

Move to my folder: move the message to the My

folders folder.

Protection: protect the message from being

deleted.

•

Sort by: change the sort order of the messages.

MMS messages

Protection: protect the message from being

deleted.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

Using message options

While viewing a message, press <Options> to access

the following options:

•

Forward: forward the message to another person.

Delete: delete the message or all messages.

SMS messages

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Reply via: reply to the sender via SMS or MMS

message.

•

Forward: forward the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Cut media: save media content from the message

into your phone’s memory.

Draft (Menu 5.2.2)

This folder stores messages you have saved to send at

a later time.

•

Properties: access the message properties.

Configuration messages

While viewing the message list, press <Options> to

access the following options:

•

Install: apply the configuration specified in the

message to your phone.

•

View: open the message.

•

Delete: delete the message.

Edit: edit the message.

Properties: access the message properties.

Send: send the message.

Delete: delete the message or all messages.

WAP push messages

Move to my folder: move the message to the My

folder box.

•

Go to URL: connect to the URL specified in the

message.

•

Move to Phone/SIM: move the message to the

Phone or SIM memory.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Sort by: change the sort order of the message list.

Properties: access the message properties.

Delete: delete the message.

Delivery report messages

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Delete: delete the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

While viewing a message, press <Options> to access

the following options:

•

Move to my folder: move the message to My

folder box.

•

Send again: resend the message.

•

Sort by: change the sort order of the message list.

Forward: forward the message to other people.

Delete: delete the selected message.

Properties: access properties of the message.

Sentbox (Menu 5.2.4)

Move to Phone/SIM: move the message

between the SIM card and the phone’s memory.

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

•

Protection: protect the message from being

deleted.

•

Forward: forward the message to other people.

Properties: access information about the

message.

Delete: delete the message.

Move to phone/SIM: move the message

between the SIM card and the phone’s memory.

From the message list, press <Options> to access

the following options:

•

Protection: protect the message from being

deleted.

•

View: open the message.

Send again: forward the message to other

people.

Properties: access information about the

message.

•

Cancel sending: stop sending the message.

Edit: edit the message.

Delete: delete the message or all messages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

From the message list, press <Options> to access

the following options:

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

•

View: open the message.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved;

Forward: forward the message to other people.

Delete: delete the selected message.

Move to my folder: move the message to the My

folder box.

indicates that

an e-mail has been retrieving from the

•

Sort by: change the sort order of the message list.

server and

indicates that an e-mail has

Properties: access properties of the message.

been failed to retrieve.

Protection: protect the message from being

deleted.

icon next to a message means that a

message is of high priority. A grey-

coloured message icon is of low priority.

•

Move to Phone/SIM: move the message

between the SIM card and the phone’s memory.

3. Scroll to an e-mail or header and press [ ].

Email box (Menu 5.2.5)

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

This folder stores e-mails that you have received.

1. Select an e-mail account.

Press [Left] or [Right] to move to the first or last

page.

2. Press <Select> when Check new mail is

highlighted to get new e-mails from the server.

5. Select an attached file to view or play it.

The phone checks for new e-mails and retrieves

received e-mails.

Download from Www.Somanuals.com. All Manuals Search And Download.

While viewing the e-mail content or message list,

press <Options> to access the following options:

•

Check new Email: check the Email box for new

e-mails.

Properties: access the properties of the e-mail.

Options may vary depending on the status of the

e-mail.

My folder (Menu 5.2.6)

•

Open file: open the selected item.

Use this menu to view the message you have moved

to this folder using the Move to my folder option

while reading a message.

Retrieve: retrieve one or all of the e-mails from

the e-mail server.

While viewing a message list, press <Options> to

access the following options:

•

Reply to: send a reply to the sender or to all of

the other recipients.

•

View: open the message.

Edit: edit the message.

Send: send the message.

•

Forward: forward the e-mail.

Delete: delete the currently selected item.

Move to my folder: move the e-mail to the My

folder folder.

Delete: delete the selected message or all of the

messages.

•

Add to block list: add the sender’s e-mail

address to the filter list to reject e-mails from that

address.

•

Sort by: change the sort order or the message

list.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Protection: protect the message from being

deleted.

Save file: save the selected media content or all

media contents from the message to your phone’s

memory.

Properties: access the properties of the message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Edit: change the selected template.

New: add a new template.

Templates (Menu 5.3)

Use this menu to create, edit, and send text templates

and MMS templates.

Delete: delete the template.

Delete all: delete all templates.

Text template (Menu 5.3.1)

Use this menu to preset a maximum of frequently

used messages.

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder one by one, or all at once.

From the Text templates screen, press <Options> to

access the following options:

1. Press [ ] to check the message boxes to be

cleared.

•

Edit: change the selected template.

Send message: send the template as an SMS,

MMS, or e-mail message.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

•

Delete: delete the template.

Settings (Menu 5.5)

MMS template (Menu 5.3.2)

When you access this menu, you can view the list of

templates you have saved.

Use this menu to set up various options for using the

messaging service.

From the MMS template list, press <Options> to

access the following options:

Text message (Menu 5.5.1)

You can configure default SMS settings.

•

View: open the template message.

•

Send settings: set up the following options for

sending a text message:

Send: send the template as an MMS message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reply path: allow the recipient to reply to you

through your message centre.

Multimedia message (Menu 5.5.2)

You can configure default MMS settings.

Delivery report: set the network to inform you

when your message has been delivered.

•

Send settings: set up the following options for

sending a multimedia message:

Character support: select a character encoding

type. If you select Auto, the phone switches the

encoding type from GSM-alphabet to Unicode if

you enter an Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half.

Priority: set the priority level of your messages.

Validity period: set the length of time your

messages are stored in the message centre.

Delivery after: set a time delay before messages

are sent.

Address hiding: set your address to be hidden

from the recipient’s phone.

If this menu is not shown, your phone provides the

Auto character encoding by default.

Delivery report: set the network to inform you

Validity period: set the length of time your

when your message has been delivered.

messages are stored in the SMS centre.

Read reply: determine whether or not the phone

sends a read-reply request.

Message type: set the default message type. The

network can convert the messages into the

selected format.

•

Receive settings: set up the following options for

receiving a multimedia message:

Service centre: store or change the number of

your message centre.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

•

Block number: set up a message filter by

entering phone numbers so that the phone rejects

messages from those numbers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Current profile: select a profile.

Profile settings: customise the following

options for each profile.

Home reception and Roaming reception have the

following options:

Profile name: assign a name to the MMS

profile.

•

Automatic: the phone automatically retrieves

messages from the server.

Server URL: enter the address of your MMS

server.

•

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Proxy: connect to the GPRS network using the

proxy server.

GPRS settings: customise the settings

required for connecting to the GPRS network.

Anonymous reject: reject messages from

unknown senders.

Version: select the maximum file size of MMS

attachments.

Adverts reject: reject advertisements.

Email (Menu 5.5.3)

Report allowed: send a delivery report from the

network to the sender.

You can configure default network settings that are

required to send or receive e-mails.

•

Block number: set up a message filter by

entering phone numbers so that the phone rejects

messages from those numbers.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

MMS profiles: select a connection profile to be

used for MMS.

•

Send settings: set up the following options for

sending an e-mail:

Download from Www.Somanuals.com. All Manuals Search And Download.

Send copy to self: send a copy of your e-mail to

your own e-mail address.

Read reply: determine whether or not the phone

sends a read-reply request.

Delivery confirm: set the network to inform you

when your e-mail has been delivered.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

Read confirm: send a request for a reply along

with your e-mail.

Retrieve option: determine whether or not the

phone retrieves headers only or the entire e-mail.

Priority: select the priority level of your e-mail.

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mail.

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Edit name: edit the name in your signature.

Edit telephone number: edit the phone number

in your signature.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

Edit note: edit the tag line in your signature.

•

Receive settings: set up the following options for

receiving e-mails.

•

Block list: set up a message filter.

Address list: specify e-mail addresses to reject

e-mails from those addresses.

Check interval: determine how often the phone

checks the server for incoming e-mails.

Subject list: specify subjects to reject e-mails

which contain those subjects.

If you set this option to Not used, you can use the

Check new mail feature to check your e-mail

manually.

Email account: set up an e-mail account and

select an account to be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Current account: select an account.

•

POP3 server: enter the IP address or domain

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using

the APOP login scheme when this option is

selected.

Account settings: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

•

In use: activate the current e-mail account.

Account name: enter a name for the currently

selected account.

These options are available when the protocol type

is IMAP4

•

User name: enter a user name.

•

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

Email address: enter your e-mail address.

Reply address: enter an e-mail address to be

used when you send a reply message.

User ID: enter your e-mail ID.

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Max retrieve Email: set the number of

headers you will retrieve from the server.

•

Email profile: configure the network settings

required to send or receive e-mails.

•

Current profile: select a profile.

Profile settings: configure up to five e-mail

The following options are available when the

protocol type is POP3

profiles.

Profile name: enter a profile name.

APN: enter the access point name.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Read: open received messages.

Password: enter the password.

DNS1: enter the primary DNS address.

DNS2: enter the secondary DNS address.

The Temporary box saves network messages until

the phone is switched off.

The Archive box saves network messages

indefinitely. Press <Options> and select Save

when a text notification appears. The message is

saved in the Archive box.

Push message (Menu 5.5.4)

You can change the settings for receiving WAP push

messages from the wireless web server. The following

options are available:

•

Receive: enable or disable the reception of

broadcast messages.

•

Receive: set how your phone receives push

messages.

Channel: specify the channels from which you

receive broadcast messages.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

Language: select the language in which broadcast

messages display.

Please contact your service provider for details.

specific

Memory status (Menu 5.7)

Broadcast messages (Menu 5.6)

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

The Cell Broadcast service delivers short messages on

various such as the weather or traffic.

Use this menu to change the settings for the service

and access broadcast messages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Using image options

Funbox (Menu 6)

The Funbox menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

While viewing an image or the image list, press

<Options> to access the options.

•

View: display the image.

•

Send: send the image via MMS, e-mail, or

Bluetooth.

To access this menu, press <Menu> in Idle mode and

select Funbox

•

Move to my photos: move the image to the My

photos folder.

According to the DRM (Digital Rights Management)

system, web content may not be able to be

Set as: set the image as your wallpaper or caller

ID image for a Phonebook entry.

forwarded. The content is indicated by

Slide show: set all images to display as a slide

show. You can select a time interval between

images.

Images

This menu displays photos you have taken and images

downloaded or received in messages.

•

Rename: change the name of the image.

Delete: delete the image.

Viewing an image

1. Select an image folder.

2. Scroll to an image and press [ ].

Delete all: delete all images.

Protection: protect the image from being deleted.

Properties: access the properties of the image.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using video options

Videos

While viewing the video list, press <Options> to

access the options.

This menu displays video clips you have recorded,

downloaded, or received in messages.

•

Play: play the video clip.

Playing a video clip

1. Select a video folder.

Send: send the video clip via MMS, e-mail, or

Bluetooth.

2. Scroll to a clip and press [ ].

ꢀp. 39

•

Move to my video clips: move the video clip to

the My video clips folder.

During playback, use the following keys.

•

Rename: change the name of the video clip.

Delete: delete the video clip.

Keys

Function

Pauses or resumes playback.

Turns the repeat feature on or off.

Goes backward.

Delete all: delete all video clips.

Protection: protect the video clip from being

deleted.

Left

Right

•

Properties: access the properties of the video

clip.

Skips forward.

Adjusts the volume.

Stops playback.

Music

Down

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Playing a music file

Playing a sound clip

1. Select a sound folder.

2. Scroll to a clip and press [ ].

Scroll to a file and press [ ].

ꢀp. 37

Using music options

Using sound options

While viewing the music list, press <Options> to

access the following options:

While viewing the sound list, press <Options> to

access the following options:

•

Play: play the music file.

•

Play: play the sound file.

Send: send the file via e-mail or Bluetooth.

Add play list: add a file to the play list.

Send: send the file via MMS, e-mail, or Bluetooth.

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

Set as: set the file as your ring tone or as a caller

alert melody for a Phonebook entry.

•

Rename: change the file name.

•

Rename: change the file name.

Delete: delete the selected file.

Delete all: delete all files.

Protection: protect the file from being deleted.

Properties: access the properties of the file.

Protection: protect the file from being deleted.

Properties: access the properties of the file.

Memory status

Sounds

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

This menu displays sound files you have recorded,

downloaded, or received in messages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press <Options> to access the following options:

Organiser (Menu 7)

The Organiser feature enables you to keep track of

your schedule and to-do list, to view missed alarm

events, and to make a memo.

•

View: access the stored event(s) for that date.

Create: add a new event.

Week view: switch to the week view screen.

Go to today: go to the current date.

Go to date: enter a specific date.

To access this menu, press <Menu> in Idle mode and

select Organiser

Delete: access the following deleting options:

Month view (Menu 7.1)

Selected date: delete items stored on the

currently selected date.

Consulting the calendar

When you enter the Month view menu, the calendar

in Month view appears with today’s date indicated by a

blue box.

Preceding events: delete events on past dates.

•

Delete all: delete all events.

Entering a new scheduled event

1. Scroll to a date on the calendar.

2. Press <Options> and select Create

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

→

Schedule

or Miscellaneous

•

Scheduled event

To-do item

•

Anniversary

3. Enter information or change the settings in the

following entry fields:

Miscellaneous

•

Subject: enter the title of the event.

Details: enter event details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM

3. Enter information or change the settings in the

following entry fields:

•

Occasion: enter information about the

anniversary.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM.

Location: (for Schedule) enter information

about the event location.

Alarm: set an alarm for the event.

before: set how long before the event the

alarm is to alert you.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

sound.

•

Alarm tone: select an alarm tone.

Repeat: (for Schedule) select to set the event

to recur and a repeat unit.

until: (for Schedule) if the event will recur,

set the ending date.

•

AM/PM: select AM or PM.

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

•

4. Press <Save> to save the event.

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a new anniversary

1. Select a date on the calendar.

→

To do.

2. Press <Options> and select Create

→

Anniversary

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Enter information or change the settings in the

following entry fields:

•

View: display the event details.

Send: send the event via SMS, MMS,

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

e-mail, or Bluetooth.

•

Create: add a new event.

Month view: switch to the month view screen.

Week view: switch to the week view screen.

4. Press <Save> to save the event.

Done/Undone: change the status of the event.

Viewing an event

Delete: delete the event.

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

Delete all: delete all of the events for the selected

date.

•

Blue: scheduled event • Orange: anniversary

Red: to-do item Green: miscellaneous

Week view (Menu 7.2)

•

You can view events (only for items stored for

Schedule) for the selected week.

1. Select a date on the calendar to display the events

for the day.

A cell on the timetable indicates the presence of event

information.

2. Select an event to view its details.

Using event options

Select the cell that contains the event you want.

From the event list, press <Options> to access the

following options:

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Day view (Menu 7.3)

Anniversary (Menu 7.5)

You can view events for the selected date.

Select an event to view its details.

This menu displays anniversaries you have created. If

you have set the Repeat and Alarm options, the

and

icons are activated. Select an event to view its

The following icons will be displayed according to the

event’s type and status:

details.

•

Alarm set

Miscellaneous (Menu 7.6)

Recurring event

Completed to-do

This menu displays miscellaneous events you have

created. If you have set the Alarm option, the

is activated. Select an event to view its details.

icon

To-do priority;

: low

: high,

: normal, and

To do (Menu 7.7)

Schedule (Menu 7.4)

This menu displays the scheduled events. If you have

set the Repeat and Alarm options, the and icons

are activated. Select an event to view its details.

Use this menu to display tasks you have created. The

following icons indicate the importance:

•

for high priority

for normal priority

for low priority.

A check mark appears in the status check box if the

task has been completed. The options you can use are

the same as in Day view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating a new memo

Missed alarm events (Menu 7.8)

1. Press <Options> and select Create

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

2. Enter the memo text and press [ ].

Press <View> to view the corresponding event.

Viewing a memo

Select a memo to view its details.

Viewing a missed event alarm

1. From the Organiser menu, select Missed alarm

Using memo options

events

From the memo list, press <Options> to access the

following options:

2. Select an event.

3. Press <Confirm> to confirm and delete the event.

•

Edit: edit the memo.

Create: add a new memo.

Delete: delete the selected memo.

Delete all: delete all memos.

Using missed alarm options

From the event list, press <Options> to access the

following options:

•

View: access the event.

Delete: delete the event.

Delete all: delete all events.

Memory status (Menu 7.0)

This menu displays the total amount of memory for

the calendar, the number of events you have created,

and the total number of events you can store.

Memo (Menu 7.9)

Use this menu to create memos and view memos you

have stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

2. Adjust the image by rotating the camera lens and

aiming it at the subject.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

•

Press the left soft key to access the camera

options. See the next section.

To access this menu, press <Menu> in Idle mode and

•

Use the keypad to change the camera settings

select Camera

or switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 71

]

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

4. To

Press

• Do not take photos in a place where you may

interfere with another person’s privacy.

use photo options

delete the photo

Options>.ꢀp. 72

<Delete> and then

<Yes>.

Take a photo (Menu 8.1)

return to Capture mode

[

You can take photos in various modes using the

phone. The camera produces JPEG photos.

Using camera options in Capture mode

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

In Capture mode, press the left soft key to access the

following options:

1. Press [ ] in Idle mode or access the Take a

•

Shooting mode: take a photo in the following

modes:

photo menu to turn on the camera.

The image to be captured appears on the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Single shot: take a photo in normal mode.

•

Camera short cuts: view the functions of the

keys you can use.

Multi shot: take a series of action stills. Select the

number of photos the camera will take.

Using the keypad in Capture mode

Night shot: take a high quality photo in low

lighting conditions.

You can use the keypad to customise your camera

settings in Capture mode.

•

Effects: change the colour tone or apply a special

effect to a photo.

Key

Function

Flips the image vertically.

Shows the mirror image.

•

Frames: apply a decorative frame to a photo.

Timer: set a time delay before the camera takes a

photo.

Left/Right Adjusts the brightness of the image.

•

Go to photo album: go to the Photos or My

photos folder.

Up/Down

Zooms in or out.

Settings: change the default settings for taking a

photo.

Switches to Record mode.

ꢀp. 72

Size: select an image size.

Changes the image size.

Quality: select an image quality.

View finder: change the view mode.

Shutter sound: select the sound that you hear

Changes the image quality.

Changes the camera mode.

when you press the shutter release, [

Changes the colour tone or applies a

special effect to the photo.

Default name: change the default prefix of the

file name.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Protection: protect the photo from being deleted.

Key

Function

Properties: view the properties of the photo.

Selects a decorative frame.

Sets the timer.

Record video (Menu 8.2)

You can record a video of what is displayed on the

camera screen and save it.

Goes to the Photos or My photos

folder.

1. In Capture mode, press [1].

Changes the preview screen.

2. Adjust the image by rotating the camera lens and

aiming it at the subject.

Using photo options

•

Press the left soft key to access the camera

options. See the next section.

Use the keypad to change the camera settings

After saving a photo, press <Options> to access the

following options:

•

Take another: return to Capture mode.

or switch to other modes.ꢀp. 73

Send: send the photo via MMS, e-mail, or

Bluetooth.

3. Press [

4. Press [

]

to start recording.

or the right soft key to stop recording.

•

Set as: set the photo as your wallpaper for the idle

screen or as a caller ID image for a Phonebook

entry.

The video is automatically saved in the Video

clips folder.

•

Go to photo album: go to the Photos or My

photos folder.

Rename: change the name of the photo.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording mode: select a video recording mode.

5. To

play back the video clip

Press

Select Limit of MMS to record a video suitable for

an MMS or e-mail message. The video clip is saved

in 3GP format.

[

use the video options

delete the video clip

<Options>.ꢀp. 74

Select Normal to record a video within the limit of

the currently available memory.

Delete> and then

<Yes>.

Quality: select an image quality.

return to Record mode

[C].

Audio rec.: record audio with a video clip.

Default name: change the default prefix of the

file name.

Using camera options in Record mode

In Record mode, press the left soft key to access the

following options:

•

Camcorder short cuts: view the functions of the

keys you can use.

•

Effects: change the colour tone or apply a special

effect to a video.

Using the keypad in Record mode

Timer: set a time delay before the camera starts

recording.

You can use the keypad to customise your camera

settings in Record mode:

Go to video album: go to the Video clips or My

video clips folder.

Keys

Function

Flips the image vertically.

Shows the mirror image.

Settings: change the following settings for

recording a video:

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Using video options

Keys

Function

After saving a video clip, press <Options> to access

the following options:

Left/

Right

Adjusts the brightness of the image.

•

Record another: return to Record mode.

Up/

Down

Zooms in or out.

Send: send the video clip via MMS, e-mail, or

Bluetooth.

Switches to Capture mode.ꢀp. 70

•

Go to video album: go to the Video clips or My

video clips folder.

Changes the image quality.

•

Rename: change the name of the video clip.

Changes the video recording mode.

Protection: protect the video clip from being

deleted.

Changes the colour tone or applies a

special effect to the video clip.

•

Properties: access the properties of the video

clip.

Mutes or unmutes the audio.

Sets the timer.

Photos (Menu 8.3)

Goes to the Video clips or My video clips

folder.

Use this menu to view the photos you have captured.

Scroll to a photo and press [ ].

While viewing a photo or the photo list, press

<Options> to access the following options:

•

View: view the photo on the full screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Send: send the photo via MMS, e-mail, or

Bluetooth.

Video clips (Menu 8.5)

Use this menu to store video clips you have recorded.

Scroll to a video clip and press [ ].

During playback, use the following keys:

Move to my photos: move the photo to the My

photos folder.

Set as: set the photo as your wallpaper for the

Idle screen or as a caller ID image for a Phonebook

entry.

Keys

Function

Pauses/resumes playback.

Turns the repeat feature on or off.

Goes backward.

•

Slide show: set all photos to display as a slide

show. You can select a time interval between

photos.

Left

Right

•

Rename: change the name of the photo.

Delete: delete the photo.

Skips forward.

Adjusts the volume.

Stops playback.

Delete all: delete all photos.

Protection: protect the photo from being deleted.

Properties: view the properties of the photo.

Down

While viewing video list, press <Options> to access

the following options:

My photos (Menu 8.4)

•

Play: play the selected video clip.

This image folder stores the photos you have saved

using the Move to my photos option.

Send: send the video clip via MMS, e-mail, or

Bluetooth.

For details about using a photo, refer to the “Photos

”

folder.ꢀ

p. 74

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

•

Move to my video clips: move the video clip to

the My video clips folder.

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

•

Rename: change the name of the video clip.

Delete: delete the video clip.

To access this menu, press <Menu> in Idle mode and

Delete all: delete all video clips.

select Settings

Protection: protect the video clip from being

deleted.

Time & Date (Menu 9.1)

•

Properties: view the properties of the video clip.

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

My video clips (Menu 8.6)

ꢀp. 41

This image folder stores the video clips you have

saved using the Move to my video clips option.

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Date format: select a date format.

For details about using a video clip, refer to the

•

“Video clips” folder.ꢀp. 75

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Using shortcut options

Phone settings (Menu 9.2)

Press <Options> to access the following options:

Many different features of your phone’s system can be

customised to suit your preferences.

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

Language (Menu 9.2.1)

Use this menu to select one of several languages for

the display text.

•

Remove all: deactivate all shortcut assignments.

Side key (Menu 9.2.4)

Greeting message (Menu 9.2.2)

Use this menu to set how the phone reacts when you

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

press [

] when a call comes in.

•

Mute: the keys mutes the call ringer.

Short cut (Menu 9.2.3)

Reject: the key rejects the call.

You can use the Left, Right, and Down keys as

shortcut keys to access specific menus directly from

Idle mode. Use this menu to assign a shortcut to a

key.

Extra settings (Menu 9.2.5)

You can turn the automatic redialling or answering

feature on or off.

Assigning a shortcut menu

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

1. Select a key to be used as a shortcut key.

2. Press <Options> and select Change

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

3. Select the menu to be assigned to the key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

When this option is not selected, you must press

•

Text style: select a text style.

[

] or <Accept> to answer a call.

Text colour: select the text colour.

•

Voice clarity: increase the microphone’s

sensitivity to allow the other person on the phone

to hear your voice clearly, even through you may

be whispering.

Skin (Menu 9.3.3)

You can select a skin colour for Menu mode.

LCD setting (Menu 9.3.4)

Active folder: answer an incoming call by opening

the phone.

You can change the settings for using main or external

display.

•

LCD brightness: adjust the brightness of the

external and main display for varying lighting

conditions.

Display settings (Menu 9.3)

Use this menu to change settings for the display and

light.

•

Cover display contrast: adjust the contrast of

the external display.

Wallpaper (Menu 9.3.1)

You can change the background image that is

displayed in Idle mode.

Backlight (Menu 9.3.5)

You can select the length of time the backlight and the

display stays on.

Text display (Menu 9.3.2)

•

On: select the length of time the backlight is on at

times of inactivity.

You can change the display settings for the text

displayed on the idle screen.

•

Dim: select the length of time the display is in

Dimming mode after the backlight turns off.

•

Text position: select a text position on the

display. If you don’t want to display text in Idle

mode, select Off

Download from Www.Somanuals.com. All Manuals Search And Download.

Dialing font colour (Menu 9.3.6)

Keypad tone (Menu 9.4.2)

Use this menu to select the colour type of the font for

digits to be displayed when you enter a phone number

for dialling.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using

[

]

in Idle mode.

Sound settings (Menu 9.4)

Message tone (Menu 9.4.3)

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

Use this menu to set up the ringer for incoming

messages or e-mails.

Use this menu to select a volume and alert type for

incoming calls.

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed of

any incoming messages.

•

Ring tone: select a ring tone for the call ringer.

Volume: select a ringer volume.

•

Repetition: specify how often the phone informs

you of a new message.

Alert type: specify how you are to be informed of

incoming calls.

Power on/off (Menu 9.4.4)

Melody: the phone rings using the selected ring

tone.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Vibration: the phone vibrates but not rings.

Folder on/off (Menu 9.4.5)

Vibration then melody: the phone vibrates three

Use this menu to select the tone that the phone

sounds when you open or close the phone.

times and then starts ringing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Quiet mode (Menu 9.4.6)

Network services (Menu 9.5)

Use this menu to set how the phone acts to alert you to

a specific event in Quiet mode, instead of making

sounds.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Vibration: set the phone to vibrate.

Call diverting (Menu 9.5.1)

Mute: mute all sound settings.

This network service reroutes incoming calls to a phone

number that you specify.

Extra tones (Menu 9.4.7)

Use this menu to customise additional tones for the

phone.

1. Select a call diverting option:

•

Divert always: divert all calls.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

Busy: divert calls when you are on another call.

No reply: divert calls when you do not answer

the phone.

•

Connection tone: set the phone to beep when it is

connected to the system.

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Cancel all: cancel all call diverting options.

2. Select the type of calls to be diverted.

•

Indicative tones: set the phone to beep when a

pop-up window displays.

3. To activate call diverting, select Activate

Otherwise, select Deactivate

4. Move to the Divert to line.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Enter the number to which calls are to be diverted

•

Change barring password: change the call

barring password obtained from your service

provider.

and press <Select>.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

Deactivate

Call barring (Menu 9.5.2)

4. Enter the call barring password supplied by your

This network service allows you to restrict your calls.

1. Select a call barring option:

service provider and press <Select>.

Call waiting (Menu 9.5.3)

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate and press <Select>.

To deactivate call waiting, select Deactivate

•

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

Network selection (Menu 9.5.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voice mail

server and access your voice mails.

•

Automatic: connect to the first available network

when roaming.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give the voice server number.

•

Manual: select the network you want.

Caller ID (Menu 9.5.5)

•

Connect to voice mail: connect to the voice mail

server to allow you to listen to your messages. You

can also connect to the voice mail server by

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

pressing and holding [1] in Idle mode.

Voice server number: enter the voice mail

server number.

•

Default: use the default setting provided by the

network.

Band selection (Menu 9.5.7)

Hide number: ensure your number does not

display on the other person’s phone.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

Send number: send your number each time you

make a call.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

My devices: search for connectable Bluetooth

devices. See the next section.

Bluetooth (Menu 9.6)

Use this menu to activate the Bluetooth feature.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder,

camera, and MP3 player, or vice versa.

• Some devices may not be compatible with your

phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

Bluetooth services: display available Bluetooth

services.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

2. Select Search new device

When the owner of the other device enters the

same code, pairing is complete.

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

devices, select More devices

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

Using device options

From the device list, press <Options> to access the

following options:

•

Hands-free or

headset

•

Mobile phone

Options may vary depending on the paired device.

•

Computer

Printer

•

PDA

Unknown device

•

Browse files: search for data from the device and

import data directly to your phone.

The colour of the icon indicates the status of the

the device:

•

Service list: refresh the Bluetooth service list.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Rename: rename the paired device.

Authorize/Unauthorized device: determine

whether or not the phone asks you to permit

connection when other devices try to connect to

your phone.

3. Select a device.

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

•

Delete: remove the device or all devices from the

device list.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sending data via Bluetooth

Security (Menu 9.7)

1. Activate the Bluetooth feature.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

2. Select the application in which the item you want

to send is stored.

3. Scroll to the item you want and press <Options>.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it,

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

4. Select Send

→

via Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

PIN check (Menu 9.7.1)

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Change PIN (Menu 9.7.2)

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu functions

Phone lock (Menu 9.7.3)

SIM lock (Menu 9.7.6)

This feature locks the phone from unauthorised use.

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

FDN mode (Menu 9.7.7)

The password is preset to 00000000. To change the

password, use the Change password menu.

If supported by your SIM card, Fixed Dialing Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card. To use this feature, you must enter your

PIN2.

Change password (Menu 9.7.4)

Use this menu to change your phone password. The

password is preset to 00000000

Privacy (Menu 9.7.5)

Use this menu to lock your media contacts, including

MMS messages, e-mails, images, videos, music files,

and sounds.

Change PIN2 (Menu 9.7.8)

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

1. Press [ ] to check the item(s) to lock.

2. Press <Save>.

Memory status (Menu 9.8)

3. Enter the phone password and press <OK>.

Use this menu to check the amount of memory being

used for storing data in Shared memory

Messages,

To access a locked item, you need to enter the phone

password.

Funbox Organiser Phonebook, and JAVA world.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset settings (Menu 9.9)

Solve problems

Help and personal needs

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

1. Press [ ] to check the setting category(ies) to be

reset.

When you switch on your phone, the following

messages may appear:

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

“Insert SIM card”

4. Enter the phone password and press <OK>.

•

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been enabled.

The password is preset to 00000000. You can

change this password

ꢀp. 86

•

You must enter the phone’s password before you

can use the phone.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Solve problems

“Enter PUK”

Your correspondent cannot reach you

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Be sure that you are accessing the correct cellular

network.

“No Service,” “Network Failure,” or “Not

Done” displays

•

Be sure that you have not set an incoming call

barring option.

The network connection has been lost. You may be

in a weak signal area. Move and try again.

Your correspondent cannot hear you speaking

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

Be sure that you have switched on the

microphone.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

You have entered a number but it was not

dialled

•

Be sure that you have pressed [ ].

The phone starts beeping and “Low battery”

flashes on the display

Be sure you have accessed the right cellular

network.

•

Your battery is insufficiently charged. Recharge the

battery.

•

Be sure that you have not set an outgoing call

barring option.

Download from Www.Somanuals.com. All Manuals Search And Download.

The audio quality of the call is poor

Health and safety information

SAR certification information

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

No number is dialled when you re-call a

Phonebook entry

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

•

Use the Contacts list feature to ensure the number

has been stored correctly.

•

Re-store the number, if necessary.

If the above guidelines do not help you to

solve the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

The exposure standard for mobile phones employs a unit of

measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/kg.

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The highest SAR value for this model phone was 0.822W/kg.

The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The

limit incorporates a substantial margin of safety to give addi-

tional protection for the public and to account for any variations

in measurements. The SAR values may vary, depending on

national reporting requirements and the network band.

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Download from Www.Somanuals.com. All Manuals Search And Download.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Conference call • 29

Connection tone • 80

Converter • 43

Creating messages

e-mail • 49

MMS • 48

SMS • 47

Creating organiser

anniversaries • 66

events • 65

settings • 78

Diverting, calls • 80

DTMF tones, send • 29

Index

AB mode, text input • 23

Alarm • 42

Answering

Calculator • 42

Call costs • 32

Call records

dialled • 31

E-mails

missed • 31

received • 31

Call time • 31

Caller group

managing • 34

Caller ID • 82

Calls

answering • 26

barring • 81

diverting • 80

holding • 27

redialling • 26

rejecting • 26

transferring • 28

waiting • 81

Camera

creating/sending • 49

deleting • 55

setting • 58

viewing • 54

Emergency calls • 93

call • 26

second call • 27

Anykey answer • 77

Auto redial • 77

memos • 69

tasks • 66

Backlight time, set • 78

Band selection • 82

Barring, calls • 81

Battery

FDN (Fixed Dial Number) mode

• 86

Deleting

Forwarding

call records • 31

e-mails • 55

memos • 69

missed alarms • 69

phonebook • 35

photos • 75

e-mails • 55

MMS messages • 51

Funbox • 62

charging • 7

low indicator • 8

precautions • 90

Bluetooth

receiving, data • 85

sending, data • 85

settings • 83

Games • 39

SMS messages • 51

video clips • 76

Delivery reports, message • 52

Dialled calls • 31

Display

Greeting message • 77

photos • 70

videos • 72

Broadcast messages • 61

Browser, WAP • 44

CB (Cell Broadcast) messages •

Characters, enter • 23

Health and safety • 89

Holding, call • 27

language • 77

Download from Www.Somanuals.com. All Manuals Search And Download.

Message tone • 79

Messages

searching • 32

managing • 35

options • 33

speed-dialling • 34

Network band, select • 82

Network selection • 81

Network services • 80

Icons, description • 10

Images, downloaded • 62

Inbox, messages

e-mail • 54

e-mail • 49

greeting • 77

MMS • 48

SMS • 47

Photos

deleting • 75

taking • 70

viewing • 74

MMS • 51

SMS • 50

Organiser • 65

Outbox, messages • 52

Own number • 35

web • 52

Minute minder • 80

Missed alarm events • 69

Missed calls • 31

MMS messages

creating/sending • 48

deleting • 51

setting • 57

viewing • 50

MP3 player

PIN, change • 85

PIN2, change • 86

Power on/off tone • 79

Privacy • 86

International calls • 25

Internet • 44

Password

Key tone volume • 79

Keypad tones

selecting • 79

sending • 28

Problems, solve • 87

call barring • 81

phone • 86

Phone

Received calls • 31

Received message

cell broadcast • 61

MMS • 51

SMS • 51

web • 52

Received messages

e-mail • 54

Recording

care and maintenance •

display • 10

icons • 10

options • 37

playing • 36

Language, select • 77

Last number, redial • 26

Locking

Multi-party calls • 29

Music, downloaded • 63

Muting

key tones • 28

microphone • 28

My name card • 35

locking • 86

password • 86

resetting • 86, 87

switching on/off • 8

unpacking • 6

Phonebook

media contents • 86

phone • 86

SIM card • 86

Low battery indicator • 8

videos • 72

voice memos • 38

Redialling

copying • 33

deleting • 35

editing • 33

Memory status

downloaded items • 64

phonebook • 36

Names

entering • 23

automatically • 77

manually • 26

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Resetting phone • 87

Ringer

incoming calls • 79

messages • 79

Road safety • 91

Roaming • 81

bookmarks • 45

cache, clear • 45

World time • 41

Templates

MMS • 56

text • 56

Text input mode, change • 23

Text, enter • 23

Timer • 43

Tone

Safety

connect • 80

folder • 79

keypad • 79

message • 79

minute minder • 80

power on/off • 79

information • 89

Security, calls • 85

Sent messages • 53

SIM card

inserting • 7

locking • 86

SMS messages

creating/sending • 47

deleting • 51

Videos

deleting • 76

playing • 75

recording • 72

Voice memos

playing • 39

recording • 38

viewing • 50

Sound settings • 79

Sounds, downloaded • 64

Speed-dial • 34

Stopwatch • 43

Switching on/off

microphone • 28

phone • 8

Waiting call • 81

WAP browser

access • 44

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Shack Microphone 32 1230A User Guide
Radio Shack Mixer 32 2057 User Guide
Radio Shack Speaker PASC12 User Guide
Renesas Network Card M37531T ADS User Guide
Sagem Cell Phone MW 302X User Guide
Samsung Automobile Alarm SPF 83H User Guide
Samsung Digital Camera EC ST90ZZBPSUS User Guide
Samsung Refrigerator RB197ABBP User Guide
Saunatec Hot Tub 1108 24 User Guide
Savin Printer SLP38C User Guide