TXN2771HF/TXN3071WHF
TXN3271HF/TXN2798HF
TXN3098WHF/TXN3298HF
TXN2775HF/TXN3075WHF
TXN3275HF/TXN2670WHF
TXN2745FP/TXN3245FP
TXN3234HF/TXN2668WHF
COLOR TELEVISION
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
TEL: 1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
.............
Owner’s
Instructions
AA68-02942A-00(ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning! Important
Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part of
this product.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifica-
tions to this equipment may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot,
and fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of
copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized
recording in whole or in part may be in violation of these rights.
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
As an ENERGY STAR Partner,
Samsung Electronics America, Inc. has determined that this product or product
model meets the ENERGY STAR guidelines for energy efficiency.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung TV represents the latest in television
technology. We designed it with easy-to-use on-screen menus and closed captioning capabili-
ties, making it one of the best products in its class. We are proud to offer you a product that
will provide convenient, dependable service and enjoyment for years to come.
Important Safety Information
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,
and other injuries, keep these safety precautions in mind when installing, using, and
maintaining your machine.
• Read all safety and operating instructions before operating your TV.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the TV receiver and in the operating instructions.
• Follow all operating and use instructions.
• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use
liquid or aerosol cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such
additions can increase the risk of fire, electric shock, or other personal injury.
• Do not use the TV receiver where contact with or immersion in water is a possibility, such as
near bath tubs, sinks, washing machines, swimming pools, etc.
• Do not place the TV on an unstable cart, stand, tripod, bracket, or
table where it can fall. A falling TV can cause serious injury to a
child or adult, and serious damage to the appliance. Use only with
a cart, stand, tripod, bracket, or table recommended by the manu-
facturer or sold with the TV. Follow the manufacturer’s instruc-
tions when mounting the unit, and use a mounting accessory rec-
ommended by the manufacturer. Move the TV and cart with care.
Quick stops, excessive force, and uneven surfaces can make the
unit and cart unsteady and likely to overturn.
• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for ven-
tilation to protect it from overheating. Do not block these openings with any object, and do
not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near a
radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that there
is adequate ventilation and that you’ve followed the manufacturer’s instructions for mount-
ing.
• Operate your TV receiver only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your appliance dealer
or local power company.
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Protect the power cord. Power supply cords should be routed so that they won’t be walked
on or pinched by objects placed on or against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the unit.
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a
lightning storm or when left unattended and unused for long periods of time. This will pre-
vent damage to the unit due to lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity
of overhead power lines or other electric light or power circuits or where it can fall into such
power lines or circuits. When installing an outside antenna system, be extremely careful to
keep from touching the power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric
shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous
voltage points or damage parts. Never spill liquid of any kind on the TV.
• Ground outdoor antennas. If an outside antenna or
EXAMPLE OF
ANTENNA GROUNDING
cable system is connected to the TV, be sure the
ANTENNA
LEAD IN WIRE
antenna or cable system is grounded so as to provide
GROUND CLAMP
some protection against voltage surges and built-up
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
static charges. Section 810 of the National Electrical
ELECTRIC
SERVICE
Code, ANSI/NFPA No.70-1984, provides information
GROUNDING
EQUIPMENT
CONDUCTORS
(NEC SECTION 810-21)
about proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
GROUND CLAMPS
discharge unit, size of grounding conductors, location
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
of antenna discharge unit, connection to grounding
NEC — NATIONAL ELECTRICAL CODE
electrodes, and requirements for the grounding elec-
trode.
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the TV has been exposed to rain or water
- if the TV does not operate normally by following the operating instructions
- if the TV has been dropped or the cabinet has been damaged
- when the TV exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operat-
ing instructions. Adjusting other controls may result in damage and will often require exten-
sive work by a qualified technician to restore the TV to normal.
• When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this TV, ask the service technician to
perform safety checks to determine that the TV is in a safe operating condition.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.
This television receiver provides display of television closed captioning in accordance
with §15.119 of the FCC rules.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Warranty Information
Regarding Television Format
Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total
television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on non-expanded standard
format television video and programming, should be limited to no more than 15% of the
total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports,
video game displays, station logos, web sites or computer graphics and patterns, should
be limited as described above for all televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television picture. To avoid this, vary the pro-
gram-ming
and images, and primarily display full screen moving images, not stationary patterns or
dark bars. On television models that offer picture sizing features, use these controls to
view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven
CRT aging as a result of format selection and use, as well as other burned-in images, is
not covered by your Samsung limited warranty.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Chapter 1: Your New TV . . . . . . . . . . . . . . . . 8
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 2: Installation. . . . . . . . . . . . . . . . . 14
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 14
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 14
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 15
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . 15
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting to a Cable Box that Descrambles All Channels . . . . 16
Connecting to a Cable Box that Descrambles Some Channels. . . . . 16
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting a Second VCR to Record from the TV. . . . . . . . . 20
Connecting a DVD Player (480i/480p) . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting a Digital TV Set-Top Box (480p/1080i). . . . . . . . . . . . . . . 21
Connecting to Y,Pb,Pr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting to DVI (Digital Visual Interface) . . . . . . . . . . . . . 22
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 25
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 27
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 29
Storing Channels in Memory (Automatic Method) . . . . . . . . 30
Adding and Erasing Channels (Manual Method). . . . . . . . . . 31
Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the PRE-CH Button to select the Previous Channel . . . 32
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Option 1: Setting the Clock Manually. . . . . . . . . . . . . . . . . . 34
Option 2: Using the Local PBS Channel to
Automatically Set the TV Clock . . . . . . . . . . . . . . . . . . . . . . 35
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Chapter 4: Special Features. . . . . . . . . . . . . 42
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Setting Up Your Remote Control to Operate Your VCR (or DVD) . . 42
Setting Up Your Remote Control to Operate Your Cable Box . . . . . 44
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
LNA (Low Noise Amplifier). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
TM
DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . . . 48
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 55
Extra sound settings (Turbo Sound, Surround, Auto Volume,
Melody, BBE or Woofer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . 60
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . . 61
Changing the Size of the PIP Window. . . . . . . . . . . . . . . . . . 62
Swapping the Contents of the PIP image and Main image. . . 63
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Using the V-Chip (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . 65
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . 66
How to Set up Restrictions Using the “TV guidelines”. . . . . . 66
How to Set up Restrictions using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X. . . . . . . . . . . . . . . . . . . . . . . . . . 68
How to Reset the TV after the V-Chip
Blocks a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . 69
Using the V-Chip (Canada) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . 70
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . 71
How to Set up Restrictions Using the “TV guidelines”. . . . . . 71
How to Set up Restrictions using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X. . . . . . . . . . . . . . . . . . . . . . . . . . 73
How to Set up Restrictions Using the Canadian English . . . . 74
How to Set up Restrictions Using the Canadian French . . . 75
How to Reset the TV after the V-Chip
Blocks a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . 76
Viewing the Demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . 77
Chapter 5: Troubleshooting. . . . . . . . . . . . . 78
Identifying Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using Your TV in Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter One
YOUR NEW TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit that
includes the following special features:
• Full Flat Screen
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• A special sleep timer
• Headphone jack for private listening
• 16:9 letter box format available depending upon source
• Picture in Picture (TXN2798HF/TXN3098WHF/TXN3298HF)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Familiarizing Yourself with The TV
Front Panel Buttons
The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
• TXN2771HF
• TXN3271HF
• TXN3071WHF
The Touch Switch does not run.
1. Are buttons on the Front Panel
pressed hard enough?
2. Is the Power Plug correctly connect-
ed to the outlet?
3. Do you use a nonconductor such as
a pen or pencil, etc to touch the
switch?
4. Press the Touch Switch softly if it
does not work properly.
• TXN2670WHF
• TXN2798HF
• TXN3298HF
• TXN3098WHF
• TXN3098WHF
• TXN2775HF
• TXN3275HF
• TXN3075WHF
• TXN2745FP
• TXN3245FP
9
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
• TXN3234HF
Œ
´
ˇ
TV/VIDEO
Press to change between viewing TV programs
and signals from other components.
¨
ˆ
CH M and CH L
Press to change channels. Also press to high-
light various items on the on-screen menu.
MENU
Press to see an on-screen menu of your TV's
features.
STANDBY indicator
Lights up when you turn the power off.
Remote Control Sensor
Aim the remote control towards this spot on the
TV.
VOL – , +
Press to increase or decrease the
volume. Also used to select items on the on-
mscreen menu.
Ø
POWER
Press to turn the TV on and off.
Side Panel Jacks
You can use the side panel jacks to connect an A/V component that is used only occa-
sionally, such as a camcorder or video game. (For information on connecting equipment,
see pages 13-22.)
Œ
AUDIO INPUT jacks
Used to connect the audio signals from a camcorder or video
game.
´
VIDEO INPUT jack
Used to connect a video signal from a camcorder or video
game.
ˇ
¨
SUPER VIDEO INPUT jack
S-Video signal from an S-VHS VCR or DVD player.
HEADPHONE jack
Connect a set of external headphones to this jack for private
listening.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 13 – 22.
Œ
´
ˇ
AUDIO-VIDEO MONITOR
OUTPUT jacks
∏
”
VHF/UHF jack
Connect to an antenna or to a cable TV system.
Connect to the audio/video input jacks of a
recording VCR.
SUB-WOOFER SPEAKER
OUTPUT jack
Note: The Monitor Out does not operate in
Component 1 or 2 modes.
(TXN3298HF/TXN3098WHF/
TXN2798HF)
,
¨,ˆAV INPUT jacks
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and
AV2, component 2 and AV3 input jacks are
exclusive relation with each other.
Connect to the Sub-woofer speaker jack (built in
Sub-woofer cable).
’
˝
DVI AUDIO INPUT jacks
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Receives the digital audio signals from a set top
box.
COMPONENT 1 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
DIGITAL INPUT (Digital
Visual Interface) jack
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Receives the digital video signals from a set top
box.
• TXN2745FP/TXN3245FP: 480i/480p only.
Ø
COMPONENT 2 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
• TXN2745FP/TXN3245FP: 480i/480p only.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
You can also use your remote control to operate your VCR and cable box. See page 41
for details.
Œ
´
POWER
Turns the TV on and off.
Ô
MODE
Selects a target device to be con-
trolled by the Samsung remote
control (i.e., TV, Set Top Box, VCR,
Cable box, or DVD).
S.MODE
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, cus-
tomized sound settings).
Ò
PRE-CH
Tunes to the previous channel.
ˇ
¨
P.MODE
TV/VIDEO
Adjust the TV picture by selecting
one of the preset factory settings
(or select your personal, cus-
tomized picture settings).
Press to display all of the available
video sources (i.e., AV1, AV2, AV3,
S-VIDEO).
Ú
Æ
CHL and CHM
(Channel Up/Down)
Press CHL or CHM to change
channels (Also used to highlight
selections on the on-screen
menus).
Number buttons
Press to select channels directly
on the TV.
+100
Press to select channels over 100.
For example, to select
channel 121, press “+100,” then
press “2” and “1.”
INFO
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
ˆ
VOL -, VOL
+
Press to increase or decrease the
volume (Also used to make selec-
tions on the on-screen menus).
ı
˜
EXIT
Press the menu to exit.
Up,Down,Left,
Right (L,M,œ,√)/
ENTER
Press to select highlight up, down,
left, or right. While using the on-
screen menus, press ENTER to
activate (or change) a particular
item.
Ø
∏
”
’
MUTE
Press to temporarily cut off
the sound.
SLEEP
Press to select a preset time inter-
val for automatic shutoff.
MENU
Displays the main on-screen
menu.
¯
˘
TURBO
Press to turn the TURBO sound On
or Off.
P.SIZE
MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
Press to change the screen size.
Your choices are Normal, Zoom1,
Zoom2 or Wide screen.
˝
R.SURF
Press the R.SURF button to auto-
matically return to a preferred
channel after a user-preset time
delay.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR NEW TV
Remote Control
¿
TV/Component
Press to switch the TV, COMPO-
NENT1, 2, or DIGITAL mode.
STILL (Main picture)
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn’t
operate in Component 1, 2 mode.
Note: The DIGITAL mode does
work in TXN2798HF/
TXN3098WHF/ TXN3298HF models.
≠
PIP Controls
(TXN3298HF/TXN3098WHF/
TXN2798HF)
¸
˛
DNIe
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Activates DNIe (Digital Natural
Image engine).
PIP ON
Press this button to control the PIP
window.
VCR Controls
SIZE
REW (Rewind)
Press to rewind a tape in your
VCR.
Press to make the PIP window
small, large, double screen or
stock ticker window.
STOP
Press this button to stop a tape
during play, record, rewind or
fast forward. If the button is
pressed during Full-Automatic
play, the function will be can-
celled.
SWAP
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
PLAY/PAUSE
CH
Press the PLAY/PAUSE button to
play back prerecorded tapes or
pause the tape.
Displays the available channels in
sequence (These buttons change
channels in the PIP window only).
FF
–
Reset
Press to fast forward the tape in
your VCR.
If your remote control is not func-
tioning properly, take out the bat-
teries and press the reset button
for about 2~3 seconds. Re-insert
the batteries and try using the
remote control again.
◊
SET
Use this button when you are set-
ting up your remote control to
operate your Set Top Box, VCR,
Cable box, or DVD.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Chapter Two
INSTALLATION
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads,” below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads,” on page 15.
If you have two antennas, see “Separate
VHF and UHF Antennas,” on page 15.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from the
twin leads under the
screws on the 300-75 ohm
adaptor (not supplied).
Use a screwdriver to
tighten the screws.
2
Plug the adaptor into the
VHF/UHF terminal on the
bottom of the back panel.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV.
This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the VHF/UHF ter-
minal on the bottom
of the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Because this TV is
1
cable-ready, you do not need a
cable box to view unscrambled cable
channels.
Plug the incoming cable
into the VHF/UHF
antenna terminal on back
of the TV.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting to a Cable Box that Descrambles All Channels
This terminal might be labeled
“ANT OUT,” “VHF OUT,” or simply,
“OUT.”
1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
2
Connect the other end of
this cable to the VHF/UHF
antenna
terminal on the back of
the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
This terminal might be labeled
“ANT IN,” “VHF IN,” or simply,
“IN.”
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your
cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the B–IN terminal
on the A/B switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing.
Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B
switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu-
ally channel 3 or 4.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 14-16). Skip step 1 if you have
not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks(AV1~AV3) on the TV.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-
nect two cables.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack(AV1~AV3) on
the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting an S-VHS VCR
Your TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
INPUT 1 jacks on the TV.
Make sure the jacks you are using are underneath the number “1.”
3
Connect an S-video cable
between the S-VIDEO OUT
jack on the VCR and the
S-VIDEO INPUT jack on
the TV.
An S-video cable is usually included with an S-VHS VCR. (If not, check your local
electronics store.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
(The VCR input jacks might be either on the front or on back of the VCR.)
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the VCR.
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
Connecting a DVD Player (480i/480p)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the AV-2
INPUT(VCR) or AV-3
INPUT(VCR) jacks on the
TV and the AUDIO OUT
jacks on the DVD player.
2
Connect a video cable
between the COMPO-
NENT 1 INPUT (Y/V, PB,
PR) or COMPONENT 2
INPUT (Y/V, PB, PR)jacks
on the TV and the DVD-
OUT (Y, PB, PR) jacks on
the DVD player.
Note: For an explanation of Component video, see your DVD player's owner's manual.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a Digital TV Set-Top Box (480p/1080i)
Connecting to Y,Pb,Pr
Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on
the TV. Next, connect the Left and Right audio from the set-top box to the corresponding L
and R terminals on the TV. (The connections for a typical set-top box are shown below.)
• TXN2745FP/TXN3245FP: 480p only.
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
2
Connect a set of audio
cables between the AV-3
INPUT(VCR) or AV-2
INPUT(VCR) jacks on the
TV and the AUDIO OUT
jacks on the Set Top Box.
3
Connect a video cable
between the COMPO-
NENT 2 INPUT (Y/V, PB,
PR) or COMPONENT 1
INPUT (Y/V, PB, PR)jacks
on the TV and the VIDEO
OUT (Y, PB, PR) jacks on
the Set Top Box.
Note: For detailed information, refer to the Set Top Box instruction manual.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting to DVI (Digital Visual Interface)
(TXN3298HF/TXN3098WHF/ TXN2798HF)
By inputting a high-bandwidth Digital Content Protection high-definition picture source
to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the
screen in their digital form. (This DIGITAL INPUT jack is for use in the future when
High-bandwidth Digital Content Protection DTV decoder, DVD players and D-VHS are
put on the market.)
1
Connect a coaxial cable
between the ANTENNA
OUT terminal on the Set
Top Box and the antenna
terminal on the TV.
2
Connect a set of audio
cables between the
AUDIO INPUT jacks on the
TV and the AUDIO OUT
jacks on the Set Top Box.
3
Connect a DVI cable
between the DIGITAL
INPUT jack on the TV and
the DVI OUT jack on the
Set Top Box.
Note
• The DIGITAL INPUT jack can only be use with 1080i and 480p picture signals.
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080I OR 480P.
For detailed information, refer to the Set Top Box instruction manual.
• The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal
Source” on page 41).
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
2
Connect an audio cable
between the AUDIO OUT-
PUT jack on the cam-
corder and the AUDIO
terminals on the TV.
3
Connect a video cable
between the VIDEO OUT-
PUT jack on the cam-
corder and the VIDEO ter-
minal on the TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installing Batteries in the Remote Control
1
Slide the cover out com-
pletely.
Make sure to match the “+” and
2
“–” ends of the batteries with the
Install two AAA size
batteries.
diagram inside the compartment.
Remove the batteries and store
them in a cool, dry place if you won’t
be using the remote control for a
long time.
3
Replace the cover.
The remote control can be used up
to about 23 feet from the TV.
(Assuming typical TV usage, the bat-
teries last for about one year.)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Three
OPERATION
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, five basic customer settings proceed automatically
and subsequently: Setting the language, Video signal source, Ant. input check, Auto pro-
gram, and Clock.
1
Press the POWER button
on the remote control.
The message “Plug &
Play” is displayed.
It flickers for a little while
and then the “Language”
menu is automatically
displayed.
2
Press the œ or √ button
to select the desired lan-
guage. Press the MENU
button to enter the lan-
guage, and then the
“Channel” menu is auto-
matically displayed.
3
Press the œ or √ button
to select the desired video
signal source.
Press the MENU button to
enter the video signal
source, and then the
“Ant Input check” is
automatically displayed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
4
Make sure that the
antenna is connected to
the TV. And then press the
œ or √ button to activate
"Auto Program" or
press the MENU button to
skip. (refer to “Auto
program” on page 30.)
5
Press the ENTER button to
move to the hour or
minute. Set the hour or
minute by pressing the L
or ꢀ button. (refer to
“Setting the clock” on
page 34.)
6
When you have finished,
press the MENU button.
The message “Enjoy your
watching..” is displayed.
7
If you want to reset this
feature
(1)Press the MENU button.
(2)Press the ꢀ button to
select the Setup menu
and press the ENTER
button.
(3)Press the ꢀ button to
select Plug & Play and
press the ENTER button.
The message “Plug &
Play” is displayed.
Note: Plug & Play feature doesn’t work when the V-chip is
on or when in the A/V mode.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Viewing the Menus and On-Screen Displays
Viewing the Menus
The on-screen menus disappear
from the screen after thirty seconds.
1
With the power on, press
the MENU button.
The main menu appears
on the screen. Its left side
has five icons: Picture,
Sound, Channel, Time and
Setup.
You can also use the MENU,
CHANNEL, and VOLUME buttons
on the control panel of the TV to
make selections.
2
Use the L and ꢀ buttons to highlight one of the 5 icons. Then
press the ENTER button to access the icon’s sub-menu.
3
Press the MENU button to exit.
Viewing the Display
The display identifies the current channel and the status
of certain audio-video settings.
The on-screen displays
1
disappear after ten seconds.
Press the INFO button on
the remote control.
The on-screen display
shows any or all of the fol-
lowing: Active channel,
the channel label, video
source, the time, and the
time remaining on the
sleep timer.
(“*” indicates a channel
has been manually fine
tuned.)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Selecting a Menu Language
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select “Setup”, then press
the ENTER button
2
Press the œ or √ button
to select the appropriate
language: English,
Español, or Français.
3
Press the MENU button to
exit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and
CH
buttons to scan through the channels. This eliminates the need to change chan-
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select “Channel”, then
press the ENTER button
2
Repeatedly press the
œ or √ button to cycle
through these choices:
ANT (antenna) STD, HRC
or IRC (all cable TV).
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to “Storing Channels in Memory” (next page).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2
on previous page.
2
Press the L button to
select “Auto program”.
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
3
Press the ENTER button.
The TV will begin
memorizing all of the
available channels.
Press MENU at any time to interrupt
the memorization process and return
to the Channel menu.
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the MENU
button to exit.
Note: Channel auto program does not function when the V-chip is active.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Adding and Erasing Channels (Manual Method)
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select “Channel”, then
press the ENTER button.
2
Press the L or ꢀ button
to select “Add/Erase”,
then press the ENTER but-
ton.
3
Press the √ button.
Press the L or ꢀ button
or the number buttons to
select the channel you
want to add or erase.
Press the MENU button.
4
Press the L or ꢀ button
to select “Select”.
Press the œ or √ button
to select “Added” or
“Erased”.
Press the MENU button to
exit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Changing Channels
Using the Channel Buttons
1
Press the CH
or CH
button to change channels.
When you press CH
or CH
, the TV changes channels in sequence. You will see all the
channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Use the number buttons to quickly tune to any channel.
1
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2” then “7”.
The TV will change channels when you press the
second number.
When you use the number buttons, you can directly select channels that were either erased or
not memorized.
To select a channel over 100, press the +100 button.
(For channel 122, press “+100” then “2” then “2”.)
To change to single-digit channels (0–9) faster, press “0” before the single digit.
(For channel “4” press “0” then “4”.)
Using the PRE-CH Button to select the Previous Channel
To quickly switch between two
channels that are far apart, tune to
one channel, then use the number
button to select the second channel.
Then, use the PRE-CH button to
quickly alternate between them.
1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
Adjusting the Volume
Press VOL + or – VOL – to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
1
Press MUTE and the sound cuts off.
The word “Mute” will appear in the lower-left corner of the
screen.
2
To turn mute off, press MUTE again, or simply press either the
VOL + or VOL – button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the INFO button is pressed, the channel label will appear
next to the channel number.
1
Press the CH
or CH
button to tune to the channel
that will be labeled.
Note: You cannot select
2
“Labeling” in the A/V mode.
Press the MENU button to dis-
play the menu, then press the
ꢀ button to select “Channel”.
Press the ENTER button.
3
Press the ꢀ button to select
“Labeling”.
Press the √ button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the L or ꢀ button to
select a letter, a number, “*”, or
a blank. (Pressing the L or ꢀ
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
5
Press the √ button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the L and
ꢀ buttons, as above. Repeat
the process to select the last
two digits.
Press the MENU button to set the label and clear the menus from
the screen.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV (Just press the INFO button).
Option 1: Setting the Clock Manually
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select “Time”, then press
the ENTER button.
When selecting the hours, be sure
2
to select the proper time of day (AM
or PM).
Press the ENTER button
again (the hours digits will
be highlighted). Press the
L or ꢀ button repeatedly
until the correct hour
appears.
You can change the hours by pressing
the L or ꢀ button repeatedly (or by
holding down either of these buttons).
The time will appear every time
you press the INFO button.
3
After the hour is entered,
Press the √ button.
(at this point the minutes
digits will be highlighted).
Press the L or ꢀ button
to select the correct min-
utes.
After selecting the correct
minutes, press the √ but-
ton.
Press the MENU button to
exit.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Option 2: Using the Local PBS Channel to Automatically Set the
TV Clock
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select “Time”, then press
the ENTER button.
2
Press the ꢀ button to
select “Auto Clock Set”
menu, then press the
ENTER button.
3
Press the √ button to
select Auto clock set
“On”.
4
Press the ꢀ button to
select “PBS Channel”.
While “PBS Channel” is
selected, press the √ but-
ton to activate the chan-
nel-number field.
Press the L and ꢀ to
select your local PBS
channel.
Press the MENU button.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
5
Press the ꢀ button to
select “Time Zone”.
While “Time Zone” is
selected, then press the
œ or √ to change the
Time zone.
Sequence: ATL., EAST,
CEN., MTN., PAC., ALAS.,
HAW..
6
Press the ꢀ button to
select “DST”(Daylight
saving time). While “DST”
is selected, press the œ or
√ button to indicate “Yes”
or “No”.
The clock is set.
Press the MENU button to
exit.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Customizing the Picture
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,
Tint and according to personal preference. (Alternatively, you can use one of the
“automatic” settings. See next page.)
Note: The DNIe function appears
in TXN2798HF/ TXN3098WHF/
TXN3298HF models.
1
Press the MENU button to
display menu, then press
the ENTER button.
2
Press the ꢀ button to
select “Custom”, then
press the ENTER button.
(The words Contrast,
Brightness, Sharpness,
Color, and Tint will appear
on the screen.)
Press the L or ꢀ button
to select a particular item.
After adjusting an item, the gauge
will automatically disappear (after
about 5 seconds).
3
Press the œ or √ button
to increase or decrease
the value of a particular
item.
For example, if you select
“Contrast,” pressing the
√ button increases it.
Press the MENU button to
exit.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie” ) that
are preset at the factory. You can activate either Standard, Mild or Dynamic by pressing
the P.MODE button (or by making a selection from the menu). Or, you can select
“Custom” which automatically recalls your personalized picture settings.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the œ or √ button
to select the “Dynamic”,
“Standard,” “Movie,” or
“Custom” picture setting.
•
Choose Dynamic for viewing the TV during the day or when there is bright-
light in the room.
•
•
•
Choose Standard for the standard factory settings.
Choose Movie when viewing the movie.
Choose Custom if you want to adjust the settings accordings to personal
preference (see “Customizing the Picture”, page 37).
38
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Customizing the Sound
The sound settings can be adjusted to suit your personal perferences.
(Alternatively, you can use one of the “automatic” settings. See next page.)
Note: The BBE function appears
in TXN2798HF/ TXN3098WHF/
TXN3298HF models.
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select the “Sound”, then
press the ENTER button.
2
Press the ꢀ button to
select “Equalizer”, then
press the ENTER button.
3
Press the œ or √ button
to highlight a particular
item to be channel.
Press the ꢀ or L button
to increase or decrease
the value of a particular
item.
Press the MENU button
exit.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Using Automatic Sound Settings
Your TV has four automatic sound settings (“Standard,” “Music,” “Movie,” and “Speech”)
that are preset at the factory. You can activate either Standard, Music, Movie or Speech
by pressing the S.MODE button (or by making a selection from the menu). Or, you can
select “Custom,” which automatically recalls your personalized sound settings.
1
Press the MENU button to
display the menu.
Press the ꢀ button to
select the “Sound”, then
press the ENTER button.
2
Press the œ or √ button
repeatedly to select the
“Standard,” “Music,”
“Movie,” “Speech” or
“Custom” sound settings.
•
•
•
•
•
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movies when watching movies.
Choose Speech when watching a show that is mostly dialogue (i.e., news).
Choose Custom to recall your personalized settings.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Viewing an External Signal Source
You must select the appropriate mode in order to view the external signal on the TV.
Quick way to access the external
signal source: Just press the
“TV/VIDEO” button on the remote
1
Press the MENU button to
display the menu.
control.
Press the ꢀ button to
select “Setup”, then
press the ENTER button.
2
Press the œ or √ button.
You will switch between
viewing the signals com-
ing from equipment con-
nected to the TV’s A/V
jacks, and the TV signal.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Four
SPECIAL FEATURES
Customizing Your Remote Control
Your TV comes equipped with a “universal” remote control. In addition to
controlling the TV, the universal remote can also operate a VCR, DVD and a cable box
(even if your VCR and cable box are made by manufacturers other than Samsung).
Note: The remote control might not be compatible with all DVD players, VCRs, and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (or DVD)
1
Turn off your VCR.
The remote control has four
2
“modes”: “TV,” “VCR”, “Cable” and
Press the MODE button and make sure that the VCR (or DVD)
“DVD.” Press the “MODE” button to
switch the remote control to the “VCR”
(or DVD) mode.
LED is illuminated.
3
On your Samsung remote control, press the SET button.
Make sure you enter 3 digits of the
code, even if the first digit is a “0.”
4
Enter 3 digits of the VCR (or DVD) code listed on the next
page for your brand of VCR (or DVD).
If more than one code listed, try the first
one.
If your VCR (or DVD) does not turn
on, repeat steps 2, 3, and 4, but try one of
the other codes listed for the brand of
your particular VCR (or DVD).
5
Press the POWER button on the remote control. Your VCR
(or DVD) should turn on. If your VCR (or DVD) turns on, your
remote control is now set correctly.
If no other codes are listed, try each code,
000 through 073.
When your remote control is in the
“VCR” (or DVD) mode, the volume but-
tons still control your TV’s volume.
6
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your VCR (or
DVD).
When your remote is in the “TV” mode,
the VCR control buttons (PLAY, PAUSE,
etc.) will still operate your VCR.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
VCR Codes
DVD Codes
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting Up Your Remote Control to Operate Your Cable Box
1
Turn off your cable box.
The remote control has four
“modes”: “TV”, “VCR”, “Cable” and
“DVD”.
2
Press the MODE button and make sure that the CABLE LED
is illuminated.
Press the “MODE” button to switch the
remote control to the “Cable” mode.
3
On your Samsung remote control, press the SET button.
Make sure you enter 3 digits of the
code, even if the first digit is a “0.” (If
more than one code listed, try the first
one.)
4
Enter 3 digits of the cable box code listed below for your
brand of cable box.
If your cable box does not turn on,
repeat steps 2, 3, and 4, but try one of the
other codes listed for your particular
brand of cable box (If no other codes are
listed, try each cable box code, 000
through 046).
5
Press the POWER button. Your cable box should turn on. If your
cable box turns on, your remote control is now “set up” correctly.
When your remote control is
6
in the “CABLE” mode, the volume but-
tons still control your TV’s volume. Also,
the VCR control buttons (PLAY, PAUSE,
etc.) will still operate your VCR.
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your cable
box.
Cable Box
Codes
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optional reception.
1
Select the appropriate
channel.
Press MENU to display
the menu.
Press the M button to
select the “Channel”, then
press the ENTER button.
2
Press the M button to
select “Fine tune”.
After you adjust the fine tuning,
3
“*” will appear when you press
INFO while watching this channel.
Press the œ or √ button
to adjust the fine tuning.
4
To store the fine tuning
setting in the TV’s memory,
press the MENU button.
To reset the fine tuning to
“oo”, press the L or M
button.
Press the MENU button to
exit.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
LNA (Low Noise Amplifier)
(TXN2798HF/TXN3098WHF/TXN3298HF)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Select the appropriate
channel.
Press MENU to display
the menu.
Press the M button to
select the “Channel”, then
press the ENTER button.
2
Press the M button to
select “LNA”.
Pressing œ or √ will alternate
between “On” and “Off.”
3
Press the œ or √ button
to select LNA “on.”
Press the MENU button to
exit.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Tilt
Due to the Earth’s magnetic field there may be same minor image tilt depending on the
TV’s location. When this occurs, follow the steps below.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select “Tilt”.
3
Press the œ or √ button
to adjust the Tilt.
Press the MENU button to
exit.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
TM
DNIe (Digital Natural Image engine)
TXN2798HF/TXN3098WHF/TXN3298HF
Samsung’s New Technology enables an improved image with detail, contrast and white
enhancement and 3D noise reduction.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select “DNIe”.
3
Press the œ or √ button
to select DNIe “Off”, “On”
or “Demo”.
Press the MENU button to
exit.
•
•
On: Switches on the DNIe mode.
DNIe Demo
Demo: The screen before applying
DNIe appears on the right
and the screen after applying DNIe
appears on the left.
DNIe On
DNIe Off
•
Off: Switches off the DNIe mode.
NOTE
The DNIe function doesn’t operate in the DVI modes.
•
48
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press M button to select
"Digital NR."
Pressing the œ or √ button will
3
alternate between “On” and “Off”.
Press the œ or √ button
to select Digital NR “On”.
Press the MENU button to
exit.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Screen Size
TXN3071WHF/TXN3098WHF/TXN3075WHF/TXN2670WHF
Press the P.SIZE button to change the screen.
• Wide:
Sets the picture to 16:9 wide mode.
• Panorama: Use this mode for the wide aspect ratio of a panoramic picture.
• Zoom1:
Magnifies the size of the picture on screen.
You can also move the picture on screen using the joystick up or down.
Magnifies the size of the picture more than Zoom1.
• Zoom2:
You can also move the picture on screen using the joystick up or down.
• 4:3(Normal): Sets the picture to 4:3 normal mode.
Notes: Screen size cannot be changed in the PIP mode. When the Aspect button is selected
and then the appropriate OSD(On-Screen Display) is displayed, the Channel Up/Down but-
tons don't operate for about three seconds.
TXN3271HF/TXM2771HF/TXN3298HF/TXN2798HF/TXN3275HF/
TXM2775HF/TXN2745FP/TXN3245FP/TXN3234HF
Press the P.SIZE button to change the screen.
• Normal:
Sets the picture to 4:3 normal mode.
• Zoom1:
Magnifies the size of the picture on screen.
You can also move the picture on screen using the joystick up or down.
Magnifies the size of the picture more than Zoom1.
You can also move the picture on screen using the joystick up or down.
Sets the picture to 16:9 wide mode.
• Zoom2:
• Wide:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Color Tone
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select “Color tone”.
3
Press the œ or √ button
to select ”Normal”,
“Warm 1”, “Cool 1”,
“Warm 2”or “Cool 2”
according to personal
preference.
Press the MENU button to
exit.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Using the R.Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain
amount of time. For example, you may be watching a channel when commercials start.
You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will
return to the original channel. To use the R.Surf feature:
1
While you are watching
the channel to which you
want to return, press
R.SURF. The on-screen
display will read “Surf
off”.
2
Press R.SURF again to set
the timer in thirty second
intervals, up to five min-
utes.
3
The time you set will begin counting down on the screen.
When the time runs out, the TV will return to the channel
you were watching when you set the timer.
Freezing the Picture
Note: The still function doesn’t
operate in Component 1, 2 mode.
1
Press the STILL button to freeze a moving picture.
(normal sound will still be heard.)
Press again to cancel.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Setting the On/Off Timer
Before using the timer, you must
set the TV’s clock. (See “Setting the
Clock” on page 34).
1
Press the MENU button to
display the menu.
When any of the timers are set, the
“Timer” LED will illuminate (front
panel of TV.)
Press the M button to
select "Time", then press
the ENTER button.
2
Press the M button to
select "On time".
Press the √ button to
select the “On time” hours.
(The hours digits will be
highlighted.)
Press the L or M button
repeatedly to select the
appropriate hours (i.e., the
hour when the TV will turn
on.)
3
Press the √ button to
select the “On time” min-
utes.
(The minutes digits will be
highlighted.)
Press the L or M button to
select the appropriate min-
utes.
To deactivate the “On time,”
select “Off” during this step.
4
Press the √ button to
select “On/Off.”
Press the L or M button
to turn the on-timer “On.”
(Repeatedly pressing the
L or M button will alter-
nate between on and off.)
5
When finished, press the
MENU button.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Absent Power Off
When you set the timer “On”, your
television will eventually be turned
off, if you do not operate any
controls during the 3 hours after the
TV is turned on by timer.
6
To set the Off time, press
the M button to select
“Off time.”
This function is available in only the
timer “On” mode and will prevent a
leakage accident or overheating,
caused by your TV left on for a long
time due to the timer “On” (when
you are away on holiday, for
example).
Press the √ button and
set the hours and minutes.
(Follow the same proce-
dure as in steps 1~5
above.)
7
When finished setting the timer, press the MENU button to exit.
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(from 10 to 180 minutes).
After about 5 seconds, the sleep
display will disappear from the
screen, and the time interval will be
set.
1
Press the SLEEP button on the remote control.
2
Press the SLEEP button repeatedly until the appropriate time
interval appears (any of the preset values from “Off” to
“180”).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to Stereo, Mono, or
a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
Quick way to access the MTS:
Just press the “MTS” button on the
remote control.
1
Press the MENU button to
display the menu.
Note: The BBE function appears in
TXN2798HF/ TXN3098WHF/
TXN3298HF models.
Press the M button once
to select the “Sound”,
then press the ENTER but-
ton.
2
Press the M button to
select “MTS”.
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP, or mono.
3
Press the œ or √ button
repeatedly to select
“Stereo”, “SAP”, or
“Mono”.
Press the MENU button to
exit.
•
•
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
•
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Extra sound settings (Turbo Sound,
Surround, Auto Volume, Melody, BBE or
Woofer)
The following sound settings can be adjusted to suit your personal preferences.
• Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary
to adjust the volume every time the channel is changed. “Auto volume” lets you
automat-ically adjust the volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound output when the modula-
tion sig-nal is low.
• BBE (TXN2798HF/TXN3298HF/TXN3098WHF)
A Sound related function that operates the treble, bass, and boost the function based
to 650dB standards and reverses the phase to produce replicated sound that is close to
the original sound.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Sound”, then
press the ENTER button.
2
Press the L or M button
to select the required
item, press the œ or √
button to select “On”.
Press the MENU button to
exit.
continued...
56
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
• Surround
Your Samsung TV can create a "surround" effect such that the sound seems to come
from all directions. Once the “Surround” is set to “On”, the setting applies to sound
effects such as Standard, Music, Movie and Speech.
• Turbo Sound
(TXN2771HF/TXN3071WHF/TXN3271HF/TXN2670WHF/TXN2775HF/
TXN3275HF/TXN3075WHF/TXN2745FP/TXN3245FP/TXN3234HF)
Turbo sound emphasizes the bass and treble frequencies to add fullness to the sound.
• Woofer (TXN2798HF/TXN3298HF/TXN3098WHF)
Woofer sound emphasizes the bass frequencies to add fullness to the sound.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Sound”, then
press the ENTER button.
2
Press the M button to
select “Sound effect, then
press the ENTER button.
3
Press the L or M button
to select the required
item, then press the œ or
√ button to select “On”.
Press the MENU button to
exit.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
• Melody
You can hear clear a melody sound when the TV is powered on or Off.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select “Melody” then
press the œ or √ button
to select “On”.
Press the MENU button to
exit.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language trans-
lations. All VCRs record the closed caption signal from television programs, so home-record-
ed video tapes also provide closed captions. Most pre-recorded commercial video tapes pro-
vide closed captions as well. Check for the closed caption symbol in your television schedule
and on the tape’s packaging:
.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the √ button.
2
Press the M button to
select the “Caption”, then
press the ENTER button.
Misspellings and unusual
characters sometimes occur during
closed caption transmissions, especially
those of live events. There may be a
small delay before captions appear when
you change channels. These are not
malfunctions of the TV.
3
Press the œ or √ button
to turn closed captioning
on/off.
In caption mode, captions appear at
the bottom of the screen, and they usual-
ly cover only a small portion of the
picture.
4
Press the M button to
select “Mode”, then press
œ or √ to select
“Caption” or “Text.”
In text mode, information unrelated to
the program, such as news or weather, is
displayed. Text often covers a large
portion of the screen.
Different channels and fields
display different information: Field 2
carries additional information that
supplements the information in Field 1.
(For example, Channel 1 may have
subtitles in English, while Channel 2 has
subtitles in Spanish.)
5
Depending on the particular broadcast, it might be necessary to
make changes to “Channels” and “Field”:
Use the L, M, œ and √ buttons to make the changes. (Follow
the same procedure as in steps 3~4 above.)
Press the MENU button to exit.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Viewing Picture-in-Picture
(TXN2798HF/TXN3098WHF/TXN3298HF)
You can use the PIP feature to simultaneously to watch two video sources.
Note:The PIP feature does not work with DVD signals and S-Video mode.
When PIP is selected in the Zoom mode, the Mode is automatically converted
into the Normal mode.
Activating Picture-in-Picture
Quick way to access the PIP:
Just press the PIP button on the
remote control.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select PIP, then press the
ENTER button.
If you turn TV off while watching
3
and turn it on again, the PIP window
will disappear.
Press the √ button to
select PIP “On.”
Press the MENU button to
exit.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Selecting a Signal Source (External A/V) for PIP
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select PIP, then press the
ENTER button.
Press the √ button to
select PIP “On.”
For more information about
3
external A/V components and sig-
nals, see “Viewing an External Signal
Source” on page 41.
Press the M to select the
“TV/AV”, then press the √
button repeatedly to cycle
through all of the available
signal sources:
If you select “TV”, the PIP image is
the same as the main image.
“TV”, “AV1”, “AV2” and
“AV3”.
Press the MENU button to
exit.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the Size of the PIP Window
Quick way to access the PIP size:
Just press the SIZE button on the remote
control.
1
Press the MENU button to
display the menu, then
press the ENTER button.
Press the SIZE button repeatedly to cycle
through this sequence: double screen
window, large window, small window and
stock ticker window.
2
Press the M button to
select PIP, then press the
ENTER button.
Press the √ button to
select PIP “On.”
3
Press the M to select the
“Size”, then press the √
button repeatedly to
select the “Double
Screen”, “Large Screen”,
“Small Screen” or “Stock
ticker”.
Press the MENU button to
exit.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Swapping the Contents of the PIP image and Main image
Quick way to access the SWAP:
Just press the SWAP button on the
remote control.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select PIP, then press the
ENTER button.
Press the √ button to
select PIP “On.”
3
Press the M to select the
“Swap”, then press the √
button.
The image in the PIP win-
dow will appear on the
main screen, and vice
versa.
Press the MENU button to
exit.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Changing the PIP Channel
Quick way to access the PIP channel:
Just press the CH or CH button
(blue color) on the remote control.
1
Press the MENU button to
display the menu, then
press the ENTER button.
2
Press the M button to
select PIP, then press the
ENTER button.
Press the √ button to
select PIP “On.”
3
Press the M to select the
“Channel”, then press the
√ button.
Press the L or M button
to change the channel
that appears in the PIP
window.
Press the MENU button to
exit.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Using the V-Chip (USA)
The V-Chip feature automatically locks out programming that is deemed inappropriate
for children. The user must first enter a PIN (personal ID number) before any of the
V-Chip restrictions can be set up or changed.
Note : When the V-chip feature is active, channel-auto program features do not function.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
Note: The default PIN number for a new TV set is “0-0-0-0”.
3
After entering a valid PIN
number, the “V-chip”
screen will appear.
Press the M button and
select “Change pin.”
Note: If you forget the PIN,
press the remote-control keys in the
following sequence, which resets the
pin to 0-0-0-0:
4
While the “Change pin”
field is selected, press the
ENTER button.
POWER OFF ➜ MUTE ➜ 8 ➜ 2 ➜
4 ➜ POWER ON.
The Change pin screen
will appear. Choose any
4-digits for your PIN and
enter them.
As soon as the 4 digits are entered, the “Confirm new pin”
screen appears. Re-enter the same 4 digits. When the Confirm
screen disappears, your PIN has been memorized.
Press the MENU button to exit.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
How to Enable/Disable the V-Chip
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
3
To enable the V-Chip
feature, press the √ but-
ton so that the “V-Chip
lock” field is Yes.
(Pressing the √ button
will alternate between Yes
and No.)
How to Set up Restrictions Using the “TV guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two methods:
The TV guidelines or the MPAA rating.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
continued...
66
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
Press the M button to
select the “TV Guidelines”,
then press the ENTER but-
ton.
Note: These categories consist of
two separate groups: TV-Y and TV-Y7
(young children through age 7), and
TV-G through TV-MA (everybody
else).
4
The “TV guidelines”
screen will appear.
Press the L, M buttons to
select one of the six age-
based categories:
The restrictions for these two groups
work independently: If a household
includes very young children as well
as young adults, the TV guidelines
must be set up separately for each age
group. (See next step.)
TV-Y
Young children
TV-Y7
Children 7 and over
--------------------------------------
TV-G
General audience
TV-PG Parent Guidance
TV-14
Viewers 14 and over
TV-MA Mature audience
5
At this point, one of the TV-Ratings is selected.
Press the ENTER button: Depending on your existing setup, a letter “U” or “B” will start blinking.
(U= Unblocked, B= Blocked)
While the “U” or ”B” is red, press the L or M button to block or unblock the category.
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or
M button and then repeat the process.
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change
any of the following sub-ratings:
FV: Fantasy violence
D: Dialog
L: Adult language
S: Sexual situation
V: Violence
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if
you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G catego-
ry, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The
sub-ratings (D, L, S, V) work together similarly. (See next section.)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
6
How to set the FV, D, L, S and V sub-ratings:
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).
Next, while the TV-Rating is selected , repeatedly press the √ button. This will cycle through the available
sub-ratings (FV,L, S, D or V).
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is blinking, press
the L or M button to change the sub-rating.
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or
M button and then repeat the process.
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you
block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.
7
Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up
additional restrictions based on the MPAA codes).
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-
13, R, NC-17, X
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is for movies. (Eventually, movie videocassettes will be encoded
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your
4-digit PIN number,
continued...
68
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
The “V-chip” screen will
appear.
Press the M button to
select “MPAA rating”,
then press the ENTER but-
ton.
Note: The V-Chip will automati-
cally block any category that is “more
restrictive.” For example, if you block
the “PG-13” category, then “R,” “NC-
17,” and “X” will automatically be
blocked also.
4
The “MPAA rating” screen
will appear.
Repeatedly press the M
button to select a
particular MPAA category.
Pressing the M button will
cycle through the MPAA
categories:
G
General audience (no restrictions).
PG Parental guidance suggested.
PG-13PG-13 (Parents strongly cautioned).
R
R (Restricted. Children under 17 should
be accompanied by an adult).
NC-17 No children under age 17.
X (Adults only).
X
NR Not rated.
While a particular category is selected, press ENTER to activate
it.
A letter (“U” or “B”) will be displayed. Press the L or M button
to select “U” or”B”.
Press the MENU button to save the settings and to clear all
screens.
How to Reset the TV after the V-Chip
Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following
message will appear: “Excessive rating.”
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case,
use the V-Chip function for an “emergency escape”:
Press the MENU button to display the menu. Press the M button to select the “Setup” menu and press the
ENTER button.
Press the M button to select the “V-chip” menu and press the ENTER button. Enter your PIN number, and
press the √ button to temporarily disable the V-Chip Lock.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Using the V-Chip (Canada)
The V-Chip feature automatically locks out programming that is deemed inappropriate
for children. The user must first enter a PIN (personal ID number) before any of the
V-Chip restrictions can be set up or changed.
Note : When the V-chip feature is active, channel-auto program features do not function.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
Note: The default PIN number for a new TV set is “0-0-0-0”.
3
After entering a valid PIN
number, the “V-chip”
screen will appear.
Press the M button and
select “Change pin.”
Note: If you forget the PIN,
press the remote-control keys in the
following sequence, which resets the
pin to 0-0-0-0:
4
While the “Change pin”
field is selected, press the
ENTER button.
POWER OFF ➜ MUTE ➜ 8 ➜ 2 ➜
4 ➜ POWER ON.
The Change pin screen
will appear. Choose any
4-digits for your PIN and
enter them.
As soon as the 4 digits are entered, the “Confirm new pin”
screen appears. Re-enter the same 4 digits. When the Confirm
screen disappears, your PIN has been memorized.
Press the MENU button to exit.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
How to Enable/Disable the V-Chip
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
3
To enable the V-Chip
feature, press the √ but-
ton so that the “V-Chip
lock” field is Yes.
(Pressing the √ button
will alternate between Yes
and No.)
How to Set up Restrictions Using the “TV guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two methods:
The TV guidelines or the MPAA rating.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your 4-
digit PIN number,
continued...
71
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
Press the M button to
select the “TV Guidelines”,
then press the ENTER but-
ton.
Note: These categories consist of
two separate groups: TV-Y and TV-Y7
(young children through age 7), and
TV-G through TV-MA (everybody
else).
4
The “TV guidelines”
screen will appear.
Press the L, M buttons to
select one of the six age-
based categories:
The restrictions for these two groups
work independently: If a household
includes very young children as well
as young adults, the TV guidelines
must be set up separately for each age
group. (See next step.)
TV-Y
Young children
TV-Y7
Children 7 and over
--------------------------------------
TV-G
General audience
TV-PG Parent Guidance
TV-14
Viewers 14 and over
TV-MA Mature audience
5
At this point, one of the TV-Ratings is selected.
Press the ENTER button: Depending on your existing setup, a letter “U” or “B” will start blinking.
(U= Unblocked, B= Blocked)
While the “U” or ”B” is red, press the L or M button to block or unblock the category.
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or
M button and then repeat the process.
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change
any of the following sub-ratings:
FV: Fantasy violence
D: Dialog
L: Adult language
S: Sexual situation
V: Violence
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if
you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G catego-
ry, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The
sub-ratings (D, L, S, V) work together similarly. (See next section.)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
6
How to set the FV, D, L, S and V sub-ratings:
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).
Next, while the TV-Rating is selected , repeatedly press the √ button. This will cycle through the available
sub-ratings (FV,L, S, D or V).
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is blinking, press
the L or M button to change the sub-rating.
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or
M button and then repeat the process.
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you
block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.
7
Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up
additional restrictions based on the MPAA codes).
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-
13, R, NC-17, X
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is for movies. (Eventually, movie videocassettes will be encoded
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen
will appear. Enter your
4-digit PIN number,
continued...
73
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
The “V-chip” screen will
appear.
Press the M button to
select “MPAA rating”,
then press the ENTER but-
ton.
Note: The V-Chip will automati-
cally block any category that is “more
restrictive.” For example, if you block
the “PG-13” category, then “R,” “NC-
17,” and “X” will automatically be
blocked also.
4
The “MPAA rating” screen
will appear.
Repeatedly press the M
button to select a
particular MPAA category.
Pressing the M button will
cycle through the MPAA
categories:
G
General audience (no restrictions).
PG Parental guidance suggested.
PG-13PG-13 (Parents strongly cautioned).
R
R (Restricted. Children under 17 should
be accompanied by an adult).
NC-17 No children under age 17.
X (Adults only).
X
NR Not rated.
While a particular category is selected, press ENTER to activate
it.
A letter (“U” or “B”) will be displayed. Press the L or M button
to select “U” or”B”.
Press the MENU button to save the settings and to clear all
screens.
How to Set up Restrictions Using the
Canadian English
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen will
appear. Enter your 4-digit
PIN number,
74
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
The “V-chip” screen will
appear.
Press the M button to
select “Canadian English”,
then press the ENTER but-
ton.
4
The “Canadian English” screen will appear.
Repeatedly press the M button to select a particular
Canadian English category.
Pressing the M button will cycle through the Canadian
English categories:
E
Exempt programming includes...news, sports,
documentaries and other information programming,
talk shows, music videos, and variety programming.
C
Programming intended for children under age 8.
C8+ Programming generally considered acceptable for
children 8 years and over to watch on their own.
G
General programming, suitable for all audiences.
PG Parental Guidance.
14+ Programming contains themes or content which
may not be suitable for viewers under the age of 14.
18+ Adult programming.
While a particular category is selected, press ENTER to activate it.
A letter (“U” or “B”) will be displayed. Press the L or M button to select “U” or”B”.
Press the MENU button to save the settings and to clear all screens.
How to Set up Restrictions Using the
Canadian French
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select the “V-chip”, then
press the ENTER button.
The “Enter Pin” screen will
appear. Enter your 4-digit
PIN number,
continued...
75
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
3
The “V-chip” screen will
appear.
Press the M button to
select “Canadian French”,
then press the ENTER but-
ton.
4
The “Canadian French” screen will appear.
Repeatedly press the M button to select a particular
Canadian French category.
Pressing the M button will cycle through the Canadian
French categories:
E
Exempt programming includes...news, sports,
documentaries and other information programming,
talk shows, music videos, and variety programming.
G
General.
8 ans+ 8+ General-Not recommended for young children.
13 ans+ Programming may not be suitable for children under
the age of 13.
16 ans+ Programming is not suitable for children under the
age of 16.
18 ans+ Programming restricted to adults.
While a particular category is selected, press ENTER to activate it.
A letter (“U” or “B”) will be displayed. Press the L or M button to select “U” or”B”.
Press the MENU button to save the settings and to clear all screens.
How to Reset the TV after the V-Chip
Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following
message will appear: “Excessive rating.”
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case,
use the V-Chip function for an “emergency escape”:
Press the MENU button to display the menu. Press the M button to select the “Setup” menu and press the
ENTER button.
Press the M button to select the “V-chip” menu and press the ENTER button. Enter your PIN number, and
press the √ button to temporarily disable the V-Chip Lock.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
Viewing the Demonstration
(TXN2798HF/TXN3098WHF/TXN3298HF)
To become familiar with the various menus provided by your television, you can view
the in built demonstration.
1
Press the MENU button to
display the menu.
Press the M button to
select the “Setup”, then
press the ENTER button.
2
Press the M button to
select “Demonstration”,
then press the ENTER but-
ton.
3
Each of the menu options
is displayed in turn.
When you wish to stop
the demonstration, press
any button on the remote
control.
Press the MENU button to
exit.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Five
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest service center.
Identifying Problems
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
No picture or sound.
Try another channel.
Adjust the antenna.
Try another channel.
Press the TV/VIDEO button.
Make sure the TV is plugged in.
Check the antenna connections.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
If the set is moved or turned in a different
direction, the power should be OFF for at least
30 minutes.
Picture rolls vertically.
The TV operates erratically
The TV won’t turn on.
Adjust the antenna.
Check all wire connections.
Unplug the TV for 30 seconds, then try
operating it again.
Make sure the wall outlet is working.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placement
•
•
Do not place the TV near extremely hot, cold, humid or dusty places.
Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
•
Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
•
Place the TV in a vertical position only.
Liquids
•
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious
damage.
Cabinet
•
•
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
•
Do not put heavy objects on top of the cabinet.
Temperature
•
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different
television systems that are in use around the world. A TV designed for one system may
not work properly with another system due to differences in the TV channel frequencies
Specifications
TXN3071WHF / TXN3075WHF
TXN3098WHF
TXN3271HF / TXN3275HF
TXN3298HF/TXN3234HF
TXN3245FP
TXN2771HF / TXN2775HF
TXN2798HF/TXN2670WHF
TXN2745FP
Model
AC 120 V
60Hz
190 W
AC 120 V
60Hz
190 W
AC 120 V
60Hz
Voltage
Frequency of Operation
Power Consumption
Dimensions
190 W (TXN2670WHF: 200 W)
742 x 561 x 581 / 29.21 x 22.08 x 22.87
762 x 519 x 600 / 30.00 x 20.43 x 23.62
704 x 542 x 619 / 27.72 x 21.34 x 24.37
800 x 553 x 505 / 31.50 x 21.77 x 19.88
742 x 561 x 581 / 29.21 x 22.08 x 22.87
45.5 / 100.31
880 x 600 x 555 / 34.65 x 23.62 x 21.85 880 x 585 x 690 / 34.65 x 23.03 x 27.16
898 x 559 x 587 / 35.35 x 22.01 x 23.11 911x 579 x 703 / 35.87 x 22.80 x 27.68
830 x 557 x 619 / 32.68 x 21.93 x 24.37 836 x 582 x 719 / 32.91 x 22.91 x 28.31
940 x 959 x 685 / 37.01 x 37.76 x 26.97
(mm/inches)
880 x 585 x 690 / 34.65 x 23.03 x 27.16
55.5 / 122.36
56.0 / 123.46
57.8 / 127.43
67.5 / 148.81
67 / 147.71
68.8 / 151.68
66.0 / 145.51
67.5 / 148.81
Weight
(Kg/ lbs)
47.5 / 104.72
46.5 / 102.52
40.4 / 89.07
45.5 / 100.31
79
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
80
Download from Www.Somanuals.com. All Manuals Search And Download.
|