Samsung CRT Television CL17M2MQ User Guide

CL17M2MQ  
COLOR TELEVISION  
Ow ners  
Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 1: Your New TV. . . . . . . . . . . . . . . . . 4  
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Front Panel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Side Panel Jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Chapter 2: Installation . . . . . . . . . . . . . . . . . . 9  
Connecting VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Antennas with 300-ohm Flat Twin Leads. . . . . . . . . . . . . . . . . 9  
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 10  
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . 10  
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to a Cable Box that Descrambles  
All Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Connecting to a Cable Box that Descrambles  
Some Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 16  
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 17  
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 17  
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 19  
Storing Channels in Memory (Automatic Method) . . . . . . . . 20  
Adding and Erasing Channels (Manual Method) . . . . . . . . . . 21  
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Using the PRE-CH Button to select the Previous Channel . . . 22  
Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Using Automatic Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Viewing a VCR or Camcorder Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CO NTENTS  
Chapter 4: Special Features . . . . . . . . . . . . . 29  
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Selecting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Using the Surf Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 33  
Extra Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Viewing Closed Captions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Chapter 5: Troubleshooting . . . . . . . . . . . . . 38  
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r O n e  
YO UR NEW TV  
List of Features  
Your TV was designed with the latest technology. This TV is a high-performance unit that  
includes the following special features:  
• Easy-to-use remote control  
• Easy-to-use on-screen menu system  
Automatic timer to turn the TV on and off  
Adjustable picture and sound settings that can be stored in the TVs memory  
Automatic channel tuning for up to 181 channels  
• A special filter to reduce or eliminate reception problems  
• Fine tuning control for the sharpest picture possible  
Built-in, dual channel speakers  
• A special sleep timer  
• Surround, Turbo Sound, Auto Volume  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Fam iliarizing Yourself w ith The TV  
Front Panel Buttons  
The buttons on the front panel control your TVs basic features, including the on-screen  
menu. To use the more advanced features, you must use the remote control.  
˛
MENU  
Press to see an on-screen menu of your TV's fea-  
tures.  
Rem ote Control Sensor  
Aim the remote control towards this spot on the  
TV.  
«
VOL – , +  
Press to increase or decrease the volume.  
STAND BY indicator  
Lights up when you turn the power off.  
Also used to select items on the on-screen menu.  
POWER  
Press to turn the TV on and off.  
CH and CH  
Press to change channels. Also press to select  
various items on the on-screen menu.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Side Panel J acks  
You can use the Side panel jacks to connect an A/V component that is used only occa-  
sionally, such as a camcorder or video game. (For information on connecting equipment,  
see page 15.)  
˛
AUDIO INPUTS  
Audio signals from VCRs, DVD players and similar  
devices.  
HEADPHONE  
Connect a set of external headphones to this jack  
for private listening.  
«
VIDEO INPUT  
Video signals from VCRs, DVD players and similar  
devices.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rear Panel J acks  
Use the rear panel jacks to connect an A/V component that will be connected  
continuously, such as a VCR or a DVD player.  
Because there are two sets of input jacks, you can connect two different A/V  
components (i.e., a VCR and a DVD, 2 VCRs, etc.)  
For more information on connecting equipment, see pages 9-14.  
ANT IN  
˛
VIDEO INPUT  
Video signals from VCRs, DVD players and similar  
devices.  
COMPONENT INPUTS  
Connect video from a DVD player.  
Note: Monitor Output doesn’t operate in the DVD  
mode.  
«
AUDIO INPUTS  
Audio signals from VCRs, DVD players and similar  
devices.  
VHF/ UHF  
Connect to an antenna or to a cable TV system.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
YO UR NEW TV  
Rem ote Control  
You can use the remote control up to about 23 feet from the TV. When using the remote,  
always point it directly at the TV.  
˛
POWER  
Turns the TV on and off.  
PRE-CH  
Tunes to the previous channel.  
«
Num ber buttons  
Press to select channels directly  
on the TV.  
TV/ VIDEO  
Press to display all of the available  
video sources (i.e., Antenna/Cable,  
VCR).  
+100  
Press to select channels over 100.  
For example, to select  
channel 121, press “+100,” then  
press “2” and “1.”  
CH and CH  
(Channel Up/ Dow n)  
Press CH  
channels.  
or CH  
to change  
MUTE  
Press to temporarily cut off  
the sound.  
æ
INFO  
Press to see the time, channel,  
etc., on-screen.  
VOL -, VOL  
+
EXIT  
Press to exit the menu.  
Press to increase or decrease the  
volume.  
Up, Dow n, Left,  
Right (, , ˇ , ˆ)/  
ENTER  
Press to select highlight up, down,  
left, or right. While using the on-  
screen menus, press the ENTER  
button to activate (or change) a  
particular item.  
SLEEP  
Press to select a preset time inter-  
val for automatic shutoff.  
MENU  
Displays the main on-screen  
menu.  
MTS (Multichannel  
Television Stereo)  
Press to choose stereo, mono or  
Separate Audio Program (SAP  
broadcast).  
ı
R-SURF  
Press the SURF button to automati-  
cally return to a preferred channel  
after a user-preset time delay.  
CH.SCAN  
TURBO  
Press to turn the TURBO sound On  
or Off.  
Press to have the TV automatically  
scan all of the channels it has  
memorized.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Tw o  
INSTALLATIO N  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that  
look like this, see “Antennas with  
300-ohm Flat Twin Leads” below.  
If your antenna has one lead that looks  
like this, see “Antennas with 75-ohm  
Round Leads” on next page.  
If you have two antennas, see “Separate  
VHF and UHF Antennas” on next page.  
Antennas w ith 300-ohm Flat Tw in Leads  
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has  
300-ohm twin flat leads, follow the directions below.  
1
Place the wires from the  
twin leads under the  
screws on the 300-75 ohm  
adaptor (not supplied).  
Use a screwdriver to  
tighten the screws.  
2
Plug the adaptor into the  
VHF/UHF terminal on the  
bottom of the back panel.  
ANT IN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Antennas w ith 75-ohm Round Leads  
1
Plug the antenna lead into  
the VHF/UHF  
terminal on the bottom of  
ANT IN  
the back panel.  
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must  
combine the two antenna signals before connecting the antennas to the TV. This  
procedure requires an optional combiner-adaptor (available at most electronics shops).  
1
Connect both antenna  
leads to the combiner.  
2
Plug the combiner into the  
VHF/UHF terminal on the  
bottom of the rear panel.  
ANT IN  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable w ithout a Cable Box  
Because this TV is cable-ready,  
you do not need a cable box to view  
unscrambled cable channels.  
1
Plug the incoming cable  
into the VHF/UHF antenna  
terminal on back of the TV.  
ANT IN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting to a Cable Box that Descram bles All Channels  
This terminal might be labeled  
“ANT OUT”, “VHF OUT” or simply,  
“OUT”.  
1
Find the cable that is con-  
nected to the ANTENNA  
OUT terminal on your  
cable box.  
2
Connect the other end of  
this cable to the VHF/UHF  
antenna terminal on the  
back of the TV.  
ANT IN  
Connecting to a Cable Box that Descram bles Som e Channels  
If your cable box descrambles only some channels (such as premium channels), follow the  
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of  
coaxial cable. (These items are available at most electronics stores.)  
This terminal might be labeled  
“ANT IN”, “VHF IN” or simply,  
“IN”.  
1
Find and disconnect the  
cable that is connected to  
the ANTENNA IN  
terminal on your cable  
box.  
2
Connect this cable to a  
two-way splitter.  
Incoming Cable  
Splitter  
3
Connect a coaxial cable  
between an OUTPUT ter-  
minal on the splitter and  
the IN terminal on the  
cable box.  
Incoming Cable  
Splitter  
Cable Box  
4
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the cable  
box and the B–IN terminal  
on the RF(A/B) switch.  
Incoming  
Cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
Continued...  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
5
Connect another cable  
between the other OUT  
terminal on the splitter  
and the A–IN terminal on  
the RF (A/B) switch.  
Incoming  
Cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
6
Connect the last coaxial  
cable between the OUT  
terminal on the RF (A/B)  
switch and the VHF/UHF  
terminal on the back of  
the TV.  
Incoming  
Cable  
ANT IN  
Splitter  
RF (A/B)  
Switch  
TV Rear  
Cable Box  
After youve made this connection, set the A/B switch to the A” position for normal view-  
ing. Set the A/B switch to the B” position to view scrambled channels. (When you set the  
A/B switch to “B”, you will need to tune your TV to the cable boxs output channel, which is  
usually channel 3 or 4.)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a VCR  
These instructions assume that you have already connected your TV to an antenna or a cable  
TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet  
connected to an antenna or a cable system.  
1
Unplug the cable or  
antenna from the back of  
the TV.  
ANT IN  
2
VCR Rear Panel  
Connect the cable or  
antenna to the  
ANTENNA IN terminal on  
Incoming  
Cable or  
Antenna  
the back of the VCR.  
3
VCR Rear Panel  
TV Rear Panel  
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the VCR  
and the antenna  
ANN  
Coaxial Cable  
terminal on the TV.  
A coaxial cable is usually included with a VCR. (If not, check your local electronics  
store).  
TV Rear Panel  
VCR Rear Panel  
4
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
VCR and the AUDIO jacks  
on the TV.  
A
Audio Cable  
TV Rear Panel  
5
VCR Rear Panel  
Connect a video cable  
between the VIDEO OUT  
jack on the VCR and the  
VIDEO jack on the TV.  
Video Cable  
A
Follow the instructions in Viewing a VCR or Camcorder Tape” to view your VCR tape.  
Note: This figure shows the Standard connector-jack panel. The actual configuration for your  
TV may be different.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a DVD Player (480i) (Option)  
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.  
TV Rear Panel  
1
DVD Player Rear Panel  
Connect a set of audio  
cables between the  
ANT IN  
AUDIO INPUT jacks on the  
TV and the AUDIO OUT  
jacks on the DVD player.  
Audio Cable  
TV Rear Panel  
2
DVD Player Rear Panel  
Connect a video cable  
between the COMPO-  
ANT IN  
NENT INPUT (Y, Pb, Pr)  
jacks on the TV and the  
DVD-OUT (Y, Pb, Pr) jacks  
on the DVD player.  
Video Cable  
Note: For an explanation of Component video, see your DVD player's owner's manual.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Connecting a Cam corder  
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow  
you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or  
Camcorder Tape” on page 28.)  
1
Locate the A/V output  
jacks on the camcorder.  
They are usually found on  
the side or back of the  
camcorder.  
Camcorder  
Output Jacks  
2
TV Side Panel  
Camcorder  
Output Jacks  
Connect an audio cable  
between the AUDIO OUT-  
PUT jack on the cam-  
corder and the AUDIO  
terminals on the side of  
the TV.  
Audio Cable  
Y-Connector  
3
TV Side Panel  
Camcorder  
Output Jacks  
Connect a video cable  
between the VIDEO OUT-  
PUT jack on the cam-  
corder and the VIDEO ter-  
minal on the side of the  
TV.  
Video Cable  
The audio-video cables shown here are usually included with a Camcorder. (If not, check  
your local electronics store.) If your camcorder is stereo, you need to connect a set of two  
cables.  
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV  
may be different.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATIO N  
Installing Batteries in the Rem ote Control  
1
Slide the cover out com-  
pletely.  
Make sure to match the “+” and  
2
” ends of the batteries with the  
diagram inside the compartment.  
Install two AAA size  
batteries.  
Remove the batteries and store  
them in a cool, dry place if you wont  
be using the remote control for a  
long time.  
3
Replace the cover.  
The remote control can be used up  
to about 23 feet from the TV.  
(Assuming typical TV usage, the bat-  
teries last for about one year.)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a pterTh r e e  
OPERATIO N  
Turning the TV On and Off  
Press the POWER button on the remote control.  
You can also use the POWER button on the front panel.  
View ing the Menus and On-Screen Displays  
View ing the Menus  
The on-screen menu disappear from  
the screen after about two minutes.  
1
Picture  
With the power on, press  
Mode  
ˇ
Dynamic  
ˆ
ˆ
the MENU button.  
Adjust  
Color Tone  
Size  
:
:
Cool  
Normal  
The main menu appears  
on the screen. Its left side  
has four icons: Picture,  
Sound, Channel and  
Function.  
Move  
Select  
Exit  
You can also use the MENU,  
CHANNEL and VOLUME buttons  
on the control panel of the TV to  
make selections.  
2
Use the and buttons to highlight one of the 4 icons.  
Then press the ˆ button to access the icon’s sub-menu.  
Press the EXIT button to exit.  
View ing the Display  
The on-screen displays  
1
disappear after about ten seconds.  
ANT 11  
Signal  
*
Press the INFO button.  
:
Mono  
on the remote control.  
When Closed Caption has been set,  
the icon(  
ing the INFO button.  
) will appear by press-  
The on-screen display  
shows any or all of the  
following: Active channel,  
picture mode, audio mode,  
audio source and the time.  
(“*” indicates a channel  
has been manually fine  
tuned.)  
Picture  
Sound  
MTS  
: Dynamic  
: Custom  
: Stereo  
- - : - - am  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Selecting a Menu Language  
1
Function  
Press the MENU button to  
Language  
Time  
Caption  
ˇ
English  
ˆ
ˆ
ˆ
display the menu.  
Press the or button  
to select “Function”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Function  
English  
Press the ˇ or ˆ button  
to select the appropriate  
language: English,  
Spanish or French.  
Language  
Time  
Caption  
ˇ
ˆ
ˆ
ˆ
Press the EXIT button to  
exit.  
Move  
Select  
Exit  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Mem orizing the Channels  
Your TV can memorize and store all of the available channels for both “off-air” (antenna)  
and cable channels. After the available channels are memorized, use the CH  
and  
CH  
buttons to scan through the channels. This eliminates the need to change  
channels by entering the channel digits. There are three steps for memorizing channels:  
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-  
ing channels (manual).  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify the  
type of signal source that is connected to the TV (i.e., an antenna or a cable system).  
1
Channel  
Press the MENU button to  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˇ
ANT  
TV  
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.  
Press the or button  
to select “Channel”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Channel  
ANT  
Repeatedly press the ˇ or  
ˆ button to cycle through  
these choices:  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV  
ANT (antenna), STD, HRC  
or IRC (all cable TV).  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable com-  
pany to identify the type of cable system that exists in your particular area.  
At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next  
page).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Storing Channels in Mem ory (Autom atic Method)  
1
Channel  
First, select the correct  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˇ
ANT  
TV  
ˆ
ˆ
ˆ
ˆ
ˆ
signal source (ANT, STD,  
HRC, IRC). See steps 1~2 on  
previous page.  
Press the MENU button,  
then press the or ▲  
button to select “Channel”  
then press the ˇ or ˆ but-  
ton.  
Move  
Select  
Exit  
2
Channel  
ANT  
Press the or button  
to select “Auto Program”.  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV  
Move  
Select  
Exit  
The TV automatically cycles  
through all of the available channels  
and stores them in memory. This  
takes about one to two minutes.  
3
Auto Program  
ANT 30  
Press the ˇ or ˆ button.  
The TV will begin  
memorizing all of the  
available channels.  
Press the MENU button at any time  
to interrupt the memorization  
process and return to the Channel  
menu.  
Exit  
4
After all the available channels are stored, the Channel menu  
reappears. Press the EXIT button to exit.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adding and Erasing Channels (Manual Method)  
1
Channel  
Press the MENU button to  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˇ
ANT  
TV  
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.  
Press the or button  
to select “Channel”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Channel  
Press the or button  
to select “Add/Erase”,  
then press the ˇ or ˆ  
button.  
Channel  
Select  
:
:
ANT 11  
Erased  
Move  
Select  
Exit  
3
Channel  
Press the ˇ , ˆ or number  
buttons to select the  
channel you want added  
or erased.  
Channel  
Select  
:
:
ANT 12  
Erased  
Move  
Select  
Exit  
4
Channel  
Press the or button  
to select “Select”.  
Channel  
Select  
:
:
ANT 12  
Added  
Press the ˇ or ˆ button  
to select “Added” or  
“Erased”.  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Changing Channels  
Using the Channel Buttons  
Press the CH  
or CH  
button to change channels.  
When you press CH  
or CH , the TV changes channels in sequence. You will see all the  
channels that the TV has memorized. (The TV must have memorized at least three channels.)  
You will not see channels that were either erased or not memorized.  
Directly Accessing Channels  
Use the number buttons to quickly tune to any channel.  
Press the number buttons to go directly to a channel.  
For example, to select channel 27, press “2”, then “7”.  
The TV will change channels when you press the  
second number.  
When you use the number buttons, you can directly select channels that were either erased or  
not memorized.  
To select a channel over 100, press the +100 button. (For channel 122, press “+100”, then “2”,  
then “2”.)  
To change to single-digit channels (0–9) faster, press “0” before the  
single digit. (For channel “4”, press “0”, then “4”.)  
Using the PRE-CH Button to select the Previous Channel  
To quickly switch between two  
channels that are far apart, tune to  
one channel, then use the number  
button to select the second channel.  
Then, use the PRE-CH button to  
quickly alternate between them.  
Press the PRE-CH button.  
The TV will switch to the last channel viewed.  
Channel Scan  
Press the CH.SCAN button.  
The TV automatically scan all of the channels it has memorized.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Custom izing the Picture  
You can use the on-screen menus to change the contrast, brightness, sharpness, color,  
and tint according to personal preference. (Alternatively, you can use one of the  
“automatic” settings. See next page.)  
1
Picture  
Press the MENU button to  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
display menu.  
:
:
Cool  
Normal  
Press the or  
ˇ
ˆ
button to  
select “Picture”.  
Move  
Select  
Exit  
2
Picture  
Press the or button  
to select “Adjust”, then  
press the ˇ or ˆ button.  
(The words Contrast,  
Brightness, Sharpness,  
Color and Tint will appear  
on the screen.)  
Adjust  
Contrast  
Brightness  
Sharpness  
Color  
100  
50  
70  
50  
Tint  
G
50  
R
50  
Move  
Select  
Exit  
After adjusting an item, the gauge  
will automatically disappear (after  
about 5 seconds).  
3
Press the or button to  
select a particular item,  
then press the ˇ or ˆ but-  
ton to increase or  
Contrast  
100  
decrease the value of a  
particular item.  
Press the EXIT button to  
exit.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Using Autom atic Picture Settings  
Your TV has three automatic picture settings (Dynamic, “Standard” and Movie”) that  
are preset at the factory. You can activate either Dynamic, Standard or Movie by making  
a selection from the menu. Or, you can select “Custom” which automatically recalls your  
personalized picture settings.  
1
Picture  
Press the MENU button to  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
display menu.  
:
:
Cool  
Normal  
Press the or  
ˇ
ˆ
button to  
select “Picture”.  
Move  
Select  
Exit  
2
Picture  
Press the  
ˇ
or  
ˆ
button  
Mode  
ˇ
Dynamic  
ˆ
ˆ
to select the “Dynamic”,  
“Standard”, “Movie” or  
“Custom” picture setting.  
Adjust  
Color Tone  
Size  
:
:
Cool  
Normal  
Press the EXIT button to  
exit.  
Move  
Select  
Exit  
Choose Dynamic for viewing the TV during the day or when there is  
brightlight in the room.  
Standard: Optimal indoor screen condition.  
Choose Movie when viewing the TV in low light, or when  
playing video games.  
Choose Custom if you want to adjust the settings according to personal  
preference (see “Customizing the Picture”, page 23).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Adjusting the Volum e  
Press the VOL + or VOL– button to increase or decrease the volume.  
Using Mute  
At any time, you can temporarily cut off the sound using the Mute button.  
1
Press the MUTE button and the sound cuts off.  
The word “Mute” will appear in the lower-left corner of the  
screen.  
2
To turn mute off, press the MUTE button again, or simply press  
either the VOL – or VOL + button.  
Custom izing the Sound  
You can use the on-screen menus to adjust the bass, treble, and balance according to  
individual preference. (Alternatively, you can use one of the automatic” settings. See  
next page.)  
1
Sound  
Press the MENU button to  
Mode  
Adjust  
ˇ
Custom  
ˆ
ˆ
display the menu.  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
:
:
:
:
Off  
On  
Off  
Off  
Press the or button  
to select “Sound” menu,  
ˇ
Stereo  
ˆ
then press the ˇ or  
ˆ
Move  
Select  
Exit  
button.  
2
Sound  
Custom  
Press the ˇ or  
ˆ
button  
Mode  
Adjust  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
ˆ
ˆ
repeatedly, until the word  
“Custom” is selected.  
(When Custom is select-  
ed, the word “Adjust” will  
appear on the screen.)  
:
:
:
:
Off  
On  
Off  
Off  
ˇ
Stereo  
ˆ
Move  
Select  
Exit  
3
Sound  
Press the or button  
to select “Adjust”, then  
Adjust  
Bass  
Treble  
Balance  
50  
50  
press the ˇ or  
ˆ
button.  
L
50  
R
50  
(The words Bass, Treble,  
and Balance will appear  
on the screen.)  
Move  
Select  
Exit  
Continued...  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
After adjusting an item, the gauge  
will automatically disappear (after  
about 5 seconds).  
4
Press the or button  
to select a particular item  
to be changed.  
Press the ˇ or  
ˆ
button  
Bass  
50  
to increase or decrease  
the value of a particular  
item.  
Press the EXIT button to  
exit.  
Using Autom atic Sound Settings  
Your TV has four automatic sound settings (Standard, “Music”, “Movie” and “Speech”)  
that are preset at the factory. You can activate any of them by making a selection from the  
on-screen menu. Or, you can select “Custom”, which automatically recalls your personalized  
sound settings.  
1
Sound  
Press the MENU button to  
Mode  
Adjust  
ˇ
Custom  
ˆ
ˆ
display the menu.  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
:
:
:
:
Off  
On  
Off  
Off  
Press the or button  
to select “Sound” menu,  
ˇ
Stereo  
ˆ
then press the ˇ or  
ˆ
Move  
Select  
Exit  
button.  
2
Sound  
Press the ˇ or ˆ button  
repeatedly to select the  
“Standard”, “Music”,  
“Movie”, “Speech” or  
“Custom” sound settings.  
Mode  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
Standard  
ˆ
ˆ
:
:
:
:
Off  
On  
Off  
Off  
ˇ
Stereo  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
Choose Standard for the standard factory settings.  
Choose Music when watching music videos or concerts.  
Choose Movies when watching movies.  
Choose Speech when watching a show that is mostly dialogue (i.e., news).  
Choose Custom to recall your personalized settings.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
Setting the Clock  
1
Function  
English  
Press the MENU button to  
Language  
ˇ
ˆ
ˆ
ˆ
display the on-screen  
Time  
Caption  
menu.  
Press the or button  
to select “Function”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Function  
- - am  
Press the or button  
Time  
to select “Time”, then  
Clock  
- -  
:
press the ˇ or ˆ button.  
The Time menu will  
On time  
Off time  
- -  
- -  
:
:
- - am Off  
- - am Off  
appear on the screen, and  
“Clock” will be selected.  
Move  
Select  
Exit  
When selecting the hours, be sure  
to select the proper time of day (AM  
or PM).  
3
Function  
Press the ˇ or ˆ button  
Time  
again (the hours digits will  
Clock  
10 : 00 am  
be selected).  
Press the or button  
repeatedly until the cor-  
rect hour appears.  
On time  
Off time  
- -  
- -  
:
:
- - am Off  
- - am Off  
You can change the hours by pressing  
or repeatedly (or by holding  
down either of these buttons).  
Move  
Select  
Exit  
The time will appear every time  
you press the INFO button.  
4
Function  
After the hour is entered,  
Time  
press the ˆ button. (at  
Clock  
10 : 30 am  
this point the minutes dig-  
its will be selected.)  
On time  
Off time  
- -  
- -  
:
:
- - am Off  
- - am Off  
Press the or button  
to select the correct min-  
utes.  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIO N  
View ing a VCR or Cam corder Tape  
You must select the appropriate mode in order to view the VCR or  
Camcorder signal on the TV.  
1
Channel  
Press the MENU button to  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˇ
ANT  
TV  
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.  
Press the or button  
to select “Channel”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Channel  
ANT  
Press the or button  
to select the “TV/AV”.  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
TV  
Move  
Select  
Exit  
3
Channel  
ANT  
Press the ˇ or ˆ button .  
You will switch between  
viewing the signals com-  
ing from equipment con-  
nected to the TV’s A/V  
jacks, and the TV signal.  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˆ
ˆ
ˆ
ˆ
ˆ
ˇ
AV  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
Alternate method:  
Simply press the  
TV/VIDEO button on  
the remote control to  
select an External  
Signal Source.  
AV  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fo u r  
SPECIAL FEATURES  
Fine Tuning Channels  
Use fine tuning to manually adjust a particular channel for optimal reception.  
1
Channel  
Press the MENU button to  
ANT/CATV  
Auto Program  
TV/AV  
Fine Tune  
Add/Erase  
ˇ
ˇ
ANT  
TV  
ˆ
ˆ
ˆ
ˆ
ˆ
display the menu.  
Press the or button  
to select “Channel”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Channel  
Press the or button  
to select “Fine tune”, then  
press the ˇ or ˆ button.  
Fine Tune  
Select  
:
:
0
Erased  
Move  
Select  
Exit  
3
Channel  
Press the ˇ and ˆ but-  
tons to adjust the fine tun-  
ing.  
Fine Tune  
Select  
:
:
+
3
Erased  
Move  
Adjust  
Exit  
After you adjust the fine tuning,  
“*” will appear when you press the  
INFO button while watching this  
channel.  
4
To store the fine tuning  
setting in the TV’s memo-  
ry, press the or but-  
ton to select “Select”.  
Press the ˇ or ˆ button  
to select “Added”.  
Channel  
Fine Tune  
Select  
:
:
+
3
Added  
Move  
Select  
Exit  
To reset the fine tuning to  
“0”, press the ˇ or ˆ but-  
ton to select “Erased”.  
Press the EXIT button to  
exit.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Selecting the Color Tone  
1
Picture  
Press the MENU button to  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
display menu.  
:
:
Cool  
Normal  
Press the or  
ˇ
ˆ
button to  
select “Picture”.  
Move  
Select  
Exit  
2
Picture  
Press the or button  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
to select "Color Tone".  
:
:
Cool  
Normal  
Move  
Select  
Exit  
3
Picture  
Press the ˇ or ˆ button  
repeatedly to select  
“Cool”, “Normal” or “  
Warm”.  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
:
:
Normal  
Normal  
Press the EXIT button to  
exit.  
Move  
Select  
Exit  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Screen Size  
1
Picture  
Press the MENU button to  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
display menu.  
:
:
Cool  
Normal  
Press the or  
ˇ
ˆ
button to  
select “Picture”.  
Move  
Select  
Exit  
2
Picture  
Press the or button  
Mode  
ˇ
Dynamic  
ˆ
ˆ
Adjust  
Color Tone  
Size  
to select "Size".  
:
:
Cool  
Normal  
Move  
Select  
Exit  
Picture  
3
Press the ˇ or ˆ button  
repeatedly to select  
“Normal” or “Zoom”.  
Mode  
Adjust  
Color Tone  
Size  
ˇ
Dynamic  
ˆ
ˆ
:
:
Cool  
Zoom  
Press the EXIT button to  
exit.  
Move  
Select  
Exit  
Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size.  
Zoom : Magnifies the size of the picture on screen.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the Surf Feature  
This feature allows you to set the TV to return to a particular channel after a certain  
amount of time. For example, you may be watching a channel when commercials  
start. You can set the Surf to “5 minutes”, then switch channels. After 5 minutes,  
the TV will return to the original channel. To use the Surf:  
1
Surf  
Off  
While you are watching  
the channel to which you  
want to return, press the  
R.SURF button. The on-  
screen display will read  
“Surf off”.  
The time will be decreasing while  
you are setting up the timer. And you  
will reset it when you pass five min-  
utes or turn it off.  
2
Surf  
1: 30  
Press the R.SURF button  
again to set the timer in  
thirty second intervals, up  
to five minutes.  
3
The time you set will begin counting down on the screen.  
When the time runs out, the TV will return to the channel you  
were watching when you set the timer.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Choosing a Multi-Channel Sound (MTS)  
Soundtrack  
Depending on the particular program being broadcast, you can listen to stereo, mono or  
a Separate Audio Program. (SAP audio is usually a foreign-language translation.  
Sometimes SAP has unrelated information like news or weather.)  
1
Sound  
Press the MENU button to  
Mode  
Adjust  
ˇ
Custom  
ˆ
ˆ
display the menu.  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
:
:
:
:
Off  
On  
Off  
Off  
Press the or button  
to select “Sound” menu,  
ˇ
Stereo  
ˆ
then press the ˇ or  
ˆ
Move  
Select  
Exit  
button.  
2
Sound  
Custom  
Press the or button  
Mode  
Adjust  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
ˆ
ˆ
to select “MTS”.  
:
:
:
:
Off  
On  
Off  
Off  
ˇ
Stereo  
ˆ
Move  
Select  
Exit  
The text at the bottom of the  
menu tells you if the incoming  
audio is stereo, SAP or mono.  
3
Sound  
Custom  
Press the ˇ or ˆ button  
to select “Mono”, “SAP”  
or “Stereo”.  
Mode  
Adjust  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
ˆ
ˆ
:
:
:
:
Off  
On  
Off  
Off  
ˇ
SAP  
ˆ
Press the EXIT button to  
exit.  
Move  
Select  
Exit  
Alternate method:  
Simply press the MTS but-  
ton on the remote control  
to change the MTS set-  
ting.  
MTS  
Signal  
: Stereo  
: Stereo  
Choose Stereo for channels that are broadcasting in stereo.  
Choose Mono for channels that are broadcasting in mono, or if you are  
having difficulty receiving a stereo signal.  
Choose SAP to listen to the Separate Audio Program, which is usually a  
foreign-language translation.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Extra Sound Settings  
• Auto Volume  
Each broadcasting station has its own signal conditions, and so it is not easy for you to  
adjust the volume every time the channel is changed. Auto Volume” lets you automat-  
ically adjust the volume of the desired channel by lowering the sound output when  
the modulation signal is high or by raising the sound output when the modulation sig-  
nal is low.  
• Melody  
You can set a melody to sound when the TV is powered On or Off.  
• Surround  
“Surround” converts a mono or stereo signal into simulated surround sound.  
Once the Surround” is set to On, the setting applies to sound effects such as  
Standard, Music, Movie and Speech.  
• Turbo Sound  
Turbo Sound suitably emphasizes both higher and lower bands of sound (and includes  
other effects).  
1
Sound  
Press the MENU button to  
Mode  
Adjust  
ˇ
Custom  
ˆ
ˆ
display the menu.  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
:
:
:
:
Off  
On  
Off  
Off  
Press the or button  
to select “Sound” menu,  
ˇ
Stereo  
ˆ
then press the ˇ or  
ˆ
Move  
Select  
Exit  
button.  
2
Sound  
Custom  
Press the or button  
to select required item  
you want.  
Mode  
Adjust  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
ˆ
ˆ
:
:
:
:
Off  
On  
Off  
Off  
ˇ
Stereo  
ˆ
Move  
Select  
Exit  
3
Sound  
Custom  
Press the ˇ or  
ˆ
button  
Mode  
Adjust  
Auto Volume  
Melody  
Surround  
Turbo Sound  
MTS  
ˇ
ˆ
ˆ
to select “On" or "Off".  
:
:
:
:
On  
On  
Off  
Off  
Press the EXIT button to  
exit.  
ˇ
Stereo  
ˆ
Move  
Select  
Exit  
Alternate method (Turbo  
Sound):  
Simply press the TURBO  
button on the remote con-  
trol to change the turbo  
sound setting.  
Turbo Sound  
:
On  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/ Off Tim er  
Before using the timer, you must  
set the TVs clock. (See “Setting the  
Clock” on page 27).  
1
Function  
Press the MENU button to  
Language  
Time  
Caption  
ˇ
English  
ˆ
ˆ
ˆ
display the on-screen  
menu.  
Press the or button  
to select “Function”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Function  
Press the or button  
to select “Time” then  
press the ˇ or ˆ button.  
The Time menu will  
appear on the screen.  
Time  
Clock  
10 : 30 am  
On time  
Off time  
- -  
- -  
:
:
- - am Off  
- - am Off  
Move  
Select  
Exit  
When you set the hours, make  
sure the correct time of day (AM or  
PM) appears to the right of the hour.  
3
Function  
Press the or button  
to select "On time".  
Time  
Clock  
10 : 30 am  
On time  
Off time  
06 : 00 am Off  
- -  
:
- - am Off  
Press the ˇ or ˆ button  
to select the “On time”  
hours.  
Move  
Select  
Exit  
(The hours digits will be  
highlighted.)  
Press the or button  
repeatedly to select the  
appropriate hours (i.e., the  
hour when the TV will turn  
on.)  
4
Function  
Press the ˆ button to  
select the “On time” min-  
utes.  
Time  
Clock  
10 : 30 am  
On time  
Off time  
06 : 30 am Off  
- -  
:
- - am Off  
(The minutes digits will be  
highlighted.)  
Move  
Select  
Exit  
Press the or button  
to select the appropriate  
minutes.  
Continued...  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
To deactivate the “On time”,  
select “Off” during this step.  
5
Function  
Press the ˆ button to  
select “On/Off”.  
Time  
Clock  
10 : 30 am  
06 : 30 am On  
On time  
Off time  
- -  
:
- - am Off  
Press the or button to  
turn the on-timer “On”.  
(Repeatedly pressing the ▲  
or button will alternate  
between on and off.)  
Move  
Select  
Exit  
6
When finished, press the ˆ  
button .  
7
Function  
To set the Off time, press  
the or button to  
select “Off time”.  
Time  
Clock  
10 : 30 am  
On time  
Off time  
06 : 30 am On  
- -  
:
- - am Off  
Press the ˆ button and  
set the hours and minutes.  
(Follow the same proce-  
dure as in steps 3-6  
above.)  
Move  
Select  
Exit  
Press the EXIT button to  
exit.  
Setting the Sleep Tim er  
The sleep timer automatically shuts off the TV after a preset time  
(from 10 to 180 minutes).  
After about 5 seconds, the sleep  
Press the SLEEP button  
repeatedly until the appro-  
priate time interval  
appears (any of the preset  
values from “Off” to  
“180”).  
display will disappear from the  
screen, and the time interval will be  
set.  
Sleep Timer  
:
30  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
View ing Closed Captions  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.  
These captions are usually subtitles for the hearing impaired or foreign-language translations.  
All VCRs record the closed caption signal from television programs, so home-recorded video  
tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed  
captions as well. Check for the closed caption symbol in your television schedule and on the  
tapes packaging:  
.
1
Function  
English  
Press the MENU button to  
display the on-screen  
menu.  
Language  
Time  
Caption  
ˇ
ˆ
ˆ
ˆ
Press the or button  
to select “Function”, then  
press the ˇ or ˆ button.  
Move  
Select  
Exit  
2
Function  
Press the or button  
to select the “Caption”,  
Caption  
Mode  
Channels  
Field  
:
:
:
:
Off  
Caption  
1
1
then press the ˇ or  
ˆ
button.  
Move  
Select  
Exit  
Misspellings and unusual  
characters sometimes occur during  
closed caption transmissions, especial-  
ly those of live events. There may be a  
small delay before captions appear  
when you change channels. These are  
not malfunctions of the TV.  
3
Function  
On  
Caption  
1
1
Press the ˇ or ˆ button  
to turn closed captioning  
on/off.  
Caption  
Mode  
Channels  
Field  
:
:
:
:
Move  
Select  
Exit  
In caption mode, captions  
appear at the bottom of the screen,  
and they usually cover only a small  
portion of the picture.  
4
Function  
On  
Caption  
1
1
Press the or button  
to select “Mode”.  
Caption  
Mode  
Channels  
Field  
:
:
:
:
In text mode, information unrelated  
to the program, such as news or  
weather, is displayed. Text often  
covers a large portion of the screen.  
Press the ˇ or ˆ button  
to select “Caption” or  
“Text”.  
Move  
Select  
Exit  
Different channels and fields  
display different information: Field 2  
carries additional information that  
supplements the information in  
Field 1. (For example, Channel 1  
may have subtitles in English, while  
Channel 2 has subtitles in Spanish.)  
5
Depending on the particular broadcast, it might be necessary to  
make changes to “Channels” and “Field”:  
Use the , , ˇ and ˆ buttons to make the changes. (Follow  
the same procedure as in steps 3~4 above.)  
Press the EXIT button to exit.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch a p t e r Fiv e  
TRO UBLESHO O TING  
If the TV seems to have a problem, first try this list of possible problems and solutions.  
If none of these troubleshooting tips apply, then call your nearest service center.  
Identifying Problem s  
Problem  
Possible Solution  
Poor picture  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the TV/VIDEO button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
No color, wrong colors or tints.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
If the set is moved or turned in a different  
direction, the power should be OFF for  
at least 30 minutes.  
Picture rolls vertically.  
The TV operates erratically  
The TV wont turn on.  
Adjust the antenna.  
Check all wire connections.  
Unplug the TV for 30 seconds, then try  
operating it again.  
Make sure the wall outlet is working.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cleaning and Maintaining Your TV  
With proper care, your TV unit will give you many years of service. Please follow these  
guidelines to get the maximum performance from your TV.  
Placem ent  
Do not place the TV near extremely hot, cold, humid or dusty places.  
Do not place the TV near appliances with electric motors that create magnetic fields,  
such as vacuum cleaners.  
Keep the ventilation openings clear; do not place the TV on a soft surface, such as  
cloth or paper.  
Place the TV in a vertical position only.  
Liquids  
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious  
damage.  
Cabinet  
Never open the cabinet or touch the parts inside.  
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or  
chemicals.  
Do not put heavy objects on top of the cabinet.  
Tem perature  
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,  
and allow at least two hours for moisture that may have formed inside the unit to dry  
completely.  
Using Your TV in Another Country  
If you plan to take your TV with you to a foreign country, please be aware of the different  
television systems that are in use around the world. A TV designed for one system may  
not work properly with another system due to differences in the TV channel frequencies.  
Specifications  
CL17M2MQ  
AC 100-240V  
50/60Hz  
Model  
Voltage  
Frequency of Operation  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Scanner PRO 92 User Guide
Raypak Water Heater 399B User Guide
RCA Flat Panel Television LED24C45RQ User Guide
RCA Stereo System RP 7701K9 User Guide
Rival Gas Grill GR225 User Guide
Samsung Film Camera Samsung SmartCam User Guide
Samsung Tablet 700TC User Guide
Samsung TV VCR Combo CXM1974 User Guide
Sanyo Projector PLC EF60A User Guide
Seiko Watch 8V36 User Guide