1 Audio/Video Output Jacks
Connection Panel (depending on the model)
Connect to the audio/video input jacks of a recording VCR.
COLOR TELEVISION
The product color and shape may vary depending on the
model.
➢
2 Audio/Video Input Jacks
CL-29Z30/29Z40/29Z50/
29Z57/29Z58
Connect to the audio/video output jacks of VCRs, DVD players
and similar devices.
Rear Jack
3 Component Video Input Jacks (Y, PB, PR)
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
Owner’s Instructions
Before operating, please read this manual carefully,
and retain it for future reference.
4 ANT IN
Record your Model and Serial number.
Connect to an antenna or to a cable TV system.
3
▪ Model __________ ▪ Serial No. __________
4
Side Jack
Control Panel (depending on the model)
2 3
1
The product color and shape may vary depending on the
model.
1
➢
1
Front Panel
2
3
2
3
4
5
3
1
2
1
6
4
Please be sure to match the color coded input terminals
and cable jacks.
➢
3
2
3
When both the side and rear jacks (AV IN 2) are
connected to external equipment, the side receives
priority.
7
1 S-Video Input Jack
1
2
3
4
5
6
7
Indicator (Standby or Timer)
Remote control sensor
Power on/off
Input source selection
On-screen menu display
Volume adjustment
Channel selection
Connect an S-Video signal from a camcorder or video game.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
➢
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Audio Input Jacks
Connect audio signals from a camcorder or video game.
continued...
The 6and 7buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
AA68-03806K-01
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup - Plug & Play
Input - Source List / Edit Name
Time
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
6
6
After all available channels
are stored, the “Time” is
displayed. Press the ENTER
button. Press the ◄ or ►
button to move to the hour
or minute. Set the clock by
pressing the ▲ or ▼ button.
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
Source List
Clock
-- : -- am
TV
On Timer
Off Timer
Sleep Timer
-- : -- am Off
-- : -- am Off
: Off
AV1
----
----
----
----
AV2
1
2
3
Press the POWER button
on the remote control.
The message “Plug &
Play” is displayed. It
flickers for a little while and
then Language menu is
automatically displayed.
S-Video
Component
On Timer Volume
: 10
Move Enter
Return
Move
Enter
Return
Plug & Play
Press the SOURCE
button on the remote control repeatedly to select the
desired signal source.
➢
When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed.
Press the ◄ or ► button to
select the language, then
press the MENU button.
The message “Ant input
check” is displayed.
Edit Name
Setup
►
Edit Name
You can give a name to the
external source.
Enjoy your watching
Plug & Play feature
doesn’t work in the AV
mode.
➢
----
Time
AV1
:
:
:
:
VCR
DVD
Plug & Play
Caption
►
►
AV2
Cable STB
Sat. STB
S-Video
Component
AVRecv.
DVD Recv.
Language
▼More
: English
Game
Camcorder
DVD Combo
Adjust
Skip
Move
Enter
Return
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup)
ENTER ▲/▼ (Plug & Play)
ENTER
Setup
►
Time
Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the “Channel” is
displayed.
Plug & Play
Caption
►
►
Ant input check
Auto Program
Language
▼More
: English
Move
Enter
Return
Skip
4
5
Press the ◄ or ► button to
select “Air”, “STD”, “HRC”,
or “IRC”, then the MENU
button. The message “Auto
Program” is displayed.
Channel
►
Auto Program
Add/Delete
Air/CATV
Name
: Deleted
: Air
►
:
----
LNA
: Off
►
Adjust
Skip
Press the ENTER button to
select “Start”. The TV will
begin memorizing all of the
available channels. Press the
ENTER button to stop.
Auto Program
Air
Start
7
Enter
Skip
continued...
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel - Memorizing the Channels
Channel - Name
Channel - LNA (depending on the model)
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
When a weak broadcast signal
causes an unclear, noisy picture,
the “LNA” feature improves the
picture quality by setting to “On”.
If you experience noise on a
certain channel, set the “LNA” to
“On” or “Off” for this channel, to
obtain the optimum picture.
Channel
►
Use this feature to assign an
easy-to-remember label to any
channel (i.e., “CBS”, “ESPN”,
“PBS2”, “CNN1”, etc.).
A label consists of four fields,
where each field is a letter
(A~Z), a number (0~9), a blank,
or -. When the INFO button is
pressed, the channel label will
appear next to the channel number.
Channel
►
Auto Program
Auto Program
Add/Delete
Air/CATV
Name
Add/Delete
: Deleted
: Air
►
are memorized, use the CH
and CH
buttons to scan
: Deleted
: Air
►
Air/CATV
through the channels.
Name
:
----
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/CATV”, “Auto Program” and “Add/Delete”.
A
----
:
LNA
: O
Off
On
LNA
: Off
►
Move
Enter
Return
Move
Adjust
Return
Air/CATV
Channel
►
Auto Program
Add/Delete
Air/CATV
Name
Before your TV can begin
memorizing the available
channels, you must specify
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
system). Select “Air”, “STD”,
: Deleted
: Air
►
:
----
LNA
: Off
►
Move
Adjust
Skip
“HRC”, or “IRC” by pressing the ◄ or ► button.
Auto Program
All available channels are
Auto Program
automatically stored in
Air
Start
7
memory when channels are
selected by the direct tuning
function.
Enter
Return
Press the ENTER button
at any time to interrupt the
memorization process.
Channel
►
Add/Delete
Auto Program
Add/Delete
Air/CATV
Name
You can add or delete
a channel to display the
channels you want only.
To use the “Add/Delete”
function, first run Auto
Program.
Deleted
:
Added
:Air
:
----
LNA
: Off
►
Move
Enter
Return
Select “Deleted” or “Added”
by pressing the ▲ or ▼ button.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup - Time
Setup - Caption
Setup -
Language / Blue Screen /
Melody / Demonstration
Clock
Your TV decodes and displays
the closed captions that are
broadcast with certain TV shows.
These captions are usually
subtitles for the hearing impaired
or foreign-language translations.
All VCRs record the closed
Caption
: On ►
Time
12 : 00 am
Caption
Mode
Clock
Setting the clock is
necessary in order to use
the various timer features of
the TV. Also, you can check
the time while watching the
TV. (Just press the INFO
button.)
: Caption
►
►
►
On Timer
Off Timer
Sleep Timer
-- : -- am Off
-- : -- am Off
: Off
Channels
Field
: 1
: 1
Language
Setup
►
Time
When you start using the TV
for the first time, you must
select the language which
will be used for displaying
menus and indications.
On Timer Volume
: 10
Plug & Play
Caption
Language
▼More
►
►
Move Adjust
Return
Move
Enter
Return
caption signal from TV programs,
: English
so home-recorded video tapes also provide closed captions.
Most pre-recorded commercial video tapes provide closed
captions as well. Check for the closed caption symbol in your
TV schedule and on the tape’s packaging: CC .
Move
Adjust
Return
On Timer / Off Timer
You can set the On/Off timers so that the TV will switch on
or off automatically at the time you select.
Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the “Blue Screen” to “Off”.
You must set the clock first.
➢
Caption: On/Off
You can activate or deactivate the “Caption” function.
Sleep Timer
Press the CAPTION button on the remote control
repeatedly to select “On” or “Off”.
➢
Melody
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
You can hear melody sound when the TV is powered on
or off.
Mode
Press the SLEEP button on the remote control
repeatedly until the appropriate time interval appears
(any of the preset values from “30 Min.” to “180 Min.”).
➢
Demonstration
-
In “Caption” mode, captions appear at the bottom
of the screen, and they usually cover only a small
portion of the picture.
To become familiar with the various menus provided by
the TV, you can view the in built demonstration.
Each of the menu options is displayed in turn.
When you wish to stop the demonstration, press any
button on the remote control.
-
In “Text” mode, information unrelated to the program,
such as news or weather, is displayed.
On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
Text often covers a large portion of the screen.
Channels / Field
Auto Power Off
Depending on the particular broadcast, it might be
necessary to make changes to “Channels” and “Field”.
Different channels and fields display different information:
Field 2 carries additional information that supplements
the information in Field 1. (For example, Channel 1 may
have subtitles in English, while Channel 2 has subtitles in
Spanish.)
☛
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
“On” mode and prevents overheating or leakages, which
may occur if a TV is on for too long.
Misspellings and unusual characters sometimes occur
during closed caption transmissions, especially those of
live events. There may be a small delay before captions
appear when you change channels. These are not
malfunctions of the TV.
☛
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
R.Surf Feature
Picture -
Picture - PIP (depending on the model)
Mode / Custom / Color Tone / Size /
Digital NR / DNIe Jr / Tilt
This feature allows you to set
the TV to return to a particular
channel after a certain amount
of time. For example, you may
be watching a channel when
commercials start. You can set
the R.Surf to “5 minutes”, then
switch channels. After minutes,
the TV will return to the original
channel.
You can display a sub picture within the main picture of TV
program or external A/V devices such as VCR or DVD.
In this way you can watch TV program or monitor the video
input from any connected devices while watching TV or other
video input.
Mode:
Dynamic/Standard
Movie/Custom
Picture
Mode
: Dynamic
►
►
►
►
Surf
00: 29
Custom
Color Tone
Size
PIP
PIP: On/Off (1)
You can activate or
deactivate the PIP function.
: Normal
: Normal
You can select the type
of picture which best
corresponds to your viewing
requirements.
PIP
: On
: TV
►
►
►
►
Source
Swap
▼More
Move
Enter
Return
If the PIP is activated
Position
Channel
:
➢
Press the R.SURF button repeatedly to set the timer
in thirty second intervals, up to five minutes.
(On) when the picture
size is set to “Zoom”
mode, the picture
: 3
Press the P.MODE
button on the remote control to select one of the
standard picture settings.
➢
Move
Enter
Return
size is automatically converted into “Normal” mode.
However, you can select “Zoom” after activating the
PIP.
Custom
Contrast
Brightness
Sharpness
Color
: 100
Custom:
: 45
: 65
: 43
Contrast/Brightness/
Sharpness/Color/Tint
The TV has several settings
which allow you to control
the picture quality.
You can hear only the sound of the main picture while
the PIP is activated.
➢
➢
Tint
: G 50 R 50
The PIP function is not available in “Component”
mode.
Move
Enter
Return
Color Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can change the color of the entire screen according to
your preference.
Source
You can select a source of the sub-picture.
Swap (3)
Size: Normal/Zoom
You can select the picture size which best corresponds to
your viewing requirements.
You can interchange the main picture and the subpicture.
Position:
/
/
/
Press the P.SIZE button on the remote control to
change the picture size.
You can select a position of the sub-picture.
➢
Channel (2)
Digital NR
You can select a channel of the sub-picture only when the
“Source” is set to “TV”.
If the signal received by the TV is weak, you can activate
this feature to reduce any static and ghosting that may
appear on the screen.
DNIe Jr (Digital Natural Image engine Junior)
(depending on the model)
Easy functions of the
remote control
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you.
DNIe Jr technology will fit every signals into your eyes.
Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound -
Troubleshooting
Mode / Custom / MTS / Auto Volume /
Turbo Sound / Pseudo Stereo
If the TV seems to have a problem, first try this list of possible
problems and solutions. If none of these troubleshooting tips
apply, then call your nearest Samsung authorized service
center.
The TV won’t turn on.
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
Mode: Standard/Music/
Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
Sound
►
Mode
: Custom
Poor picture.
Remote control malfunctions
Custom
MTS
►
►
►
: Stereo
: Off
Try another channel.
Adjust the antenna.
Check all wire connections.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission
window).
Auto Volume
▼More
Move
Enter
Return
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Check that the batteries are drained.
Press the S.MODE
➢
Poor sound quality.
button on the remote
Try another channel.
Adjust the antenna.
control to select one of the standard sound settings.
No picture or sound.
Custom: Bass/Treble/Balance
The TV has several settings which allow you to control the
sound quality.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
If you make any changes to these settings, the sound
mode is automatically switched to “Custom”.
➢
No color, wrong colors or tints.
MTS (Multi-channel Television Sound)
Depending on the particular program being broadcast, you
can listen to Mono, Stereo, or SAP.
Make sure the program is broadcast in color.
Adjust the picture settings.
Press the MTS button on the remote control
repeatedly to select “Stereo”, “Mono”, or “SAP”
(Secondary Audio Program).
➢
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Check that the batteries are drained.
Turbo Sound
This feature emphasizes the bass and treble frequencies
to add fullness to the sound.
Press the TURBO button on the remote control
repeatedly to select “Off”, “Plus” or “Voice”.
➢
continued...
Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the “Pseudo Stereo”
is set to “On” or “Off”, the setting applies to the sound
effects such as “Standard”, “Music”, “Movie” and “Speech”.
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Map
✽ : It is variable depending on the model.
Important Warranty Information
Regarding Television Format Viewing
Input
– Source List
– Edit Name
– TV / AV1 / AV2 / S-Video / Component
– VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /
Camcorder / DVD Combo
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video. The images displayed on them should
primarily be in the standard 4:3 ratio format and constantly
moving. Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total
television viewing per week.
Picture
– Mode
– Dynamic / Standard / Movie / Custom
– Contrast / Brightness / Sharpness / Color / Tint
– Cool2 / Cool1 / Normal / Warm1 / Warm2
– Normal / Zoom
– Custom
– Color Tone
– Size
– Digital NR
– DNIe Jr ✽
– Tilt ✽
– Off / On
– Off / On
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary graphics
and images on screen, such as the dark side-bars on non-
expanded standard format television video and programming,
should be limited to no more than 15% of the total television
viewing per week.
– PIP ✽
– PIP
– Off / On
– Source ✽
– Swap
– Position
– Channel
Sound
– Mode
– Custom
– MTS
– Auto Volume
– Turbo Sound
– Pseudo Stereo
– Standard / Music / Movie / Speech / Custom
– Bass / Treble / Balance
– Mono / Stereo / SAP
– Off / On
Additionally, viewing other stationary images and text such as
stock market reports, video game displays, station logos, web
sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause
uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and images,
and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
– Off / Plus / Voice
– Off / On
Channel
Setup
– Auto Program
– Add/Delete
– Air/CATV
– Name
– Deleted / Added
– Air / STD / HRC / IRC
– LNA ✽
– Off / On
– Time
– Clock
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
– Sleep Timer
– On Timer
– Off Timer
– On Timer Volume
– Plug & Play
– Caption
– Caption
– Mode
– Channels
– Field
– Off / On
– Caption / Text
– 1 / 2
– 1 / 2
– Language
– Blue Screen
– Melody
– English / Español / Português
– Off / On
– Off / On
– Demonstration
English - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|