COLOUR
TELEVISION
29Z4/34Z4
29Z6/32Z6/34Z6
29Z7/32Z7/34Z7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
DIGITAL 100Hz
TELETEXT
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG
Contents
N FOREWORD
I
Safety Instructions.........................................................................................
Caution ..........................................................................................................
2
2
I
N CONNECTING AND PREPARING YOUR TELEVISION
I
I
I
I
I
I
I
I
I
I
I
View of Control Panel....................................................................................
View of Connection Panel .............................................................................
Infrared Remote Control................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode.....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
6
7
8
9
10
10
11
12
13
13
N SETTING THE CHANNELS
I
I
I
I
I
I
Storing Channels Automatically.....................................................................
14
15
16
18
19
20
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Assigning Names to Channels ......................................................................
Skipping Unwanted Channels .......................................................................
Fine Tuning Channel Reception....................................................................
N USING YOUR TELEVISION
I
I
I
Changing the Picture Standard .....................................................................
21
22
Adjusting the Picture Settings........................................................................
Extra Picture Settings
(Scan mode / Digital NR / Tilt / LNA).............................................................
Setting the Blue Screen.................................................................................
Selecting the Picture Size..............................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Selecting the Turbo Sound............................................................................
Extra Sound Settings
23
24
24
24
25
26
26
I
I
I
I
I
I
I
(Auto volume / Melody / Pseudo stereo / Virtual surround)...........................
Selecting the Sound Mode (depending on the model) ..................................
27
28
I
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG
Contents(continued)
N USING YOUR TELEVISION (continued)
I
I
I
I
Setting the Sleep Timer.................................................................................
Setting and Displaying the Current Time.......................................................
Switching the Television On and Off Automatically.......................................
Viewing the Picture In Picture (PIP) : Option.................................................
29
30
31
32
N USING THE TELETEXT FEATURE
I
I
I
I
I
Teletext Feature ............................................................................................
34
34
35
36
37
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
N ADDITIONAL INFORMATION ON CONNECTIONS
I
I
I
I
I
I
I
Connecting to the External Input/Outputs......................................................
Connecting to the DVD Player or Digital Set-Top Box ..................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting Headphones...............................................................................
Viewing Pictures From External Sources ......................................................
38
39
39
40
40
41
41
N RECOMMENDATIONS FOR USE
I
Automatic Degaussing to Remove Colour Patches.......................................
42
42
I
Troubleshooting: Before Contacting Service Personnel................................
Symbols
☛
➢
Press
Important
Note
4
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Control Panel(depending on the model)
ENG
29Z4/34Z4
4
5
6
7
1
8
ΠPOWER ON/OFF
9
2
´ REMOTE CONTROL SENSOR
3
ˇ STANDBY INDICATOR
¨
ˆ
Ø
∏
”
’
INPUT SOURCE SELECTION
MENU DISPLAY
29Z6/32Z6/34Z6
VOLUME INCREASE
VOLUME DECREASE
NEXT CHANNEL
4
5
PREVIOUS CHANNEL
6
7
8
9
2
1
3
Using the Buttons on the Panel
➣
If the remote control no longer works or you have lost it, you can use controls on the panel of the
TV to:
N Switch on the TV when it is in Standby mode and select channels ( L CH M )
N Access the menu ( MENU )
N Adjust the volume ( + VOL
-
)
N Switch among Video input modes ( TV/VIDEO )
5
Download from Www.Somanuals.com. All Manuals Search And Download.
View of Connection Panel
ENG
Side of the TV
AUDIO INPUT (R, L)
VIDEO INPUT
S-VIDEO INPUT
HEADPHONE CONNECTOR
Rear of the TV
AUDIO/VIDEO MONITOR OUTPUT
AUDIO/VIDEO INPUT 2
COMPONENT INPUT 1
AUDIO/VIDEO INPUT 1
ANT IN
AUDIO/VIDEO INPUT 3
COMPONENT INPUT 2
75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
SUB-WOOFER SPEAKER OUTPUT
(29Z7/32Z7/34Z7)
Available format for Component Inputs; 480i/480p/1080i-60Hz
➣
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared Remote Control
ENG
AUTOMATIC SWITCH-OFF/
TELETEXT STORE
STILL PICTURE
VCR OR DVD FUNCTIONS;
- STOP
- REWIND
- PLAY/PAUSE
- FAST FORWARD
PIP FUNCTIONS (OPTION);
- PIP ON/OFF
PIP
- INTERCHANGE THE MAIN AND
SUB PICTURE (SWAP)
- STILL
- SIZE SELECTION (SIZE)
- LOCATION SELECTION
(LOCATE)
TELEVISION STAND-BY
- SCAN
- SOURCE SELECTION
(TV/VIDEO)
- CHANNEL SELECTION (PL/M)
MAKE THE REMOTE CONTROL
WORKS FOR TV, VCR, CABLE,
DVD PLAYER.
DIRECT CHANNEL SELECTION
The remote control might not
➣
be compatible with the TV
manufactured by another
company.
ON-SCREEN DISPLAY/
TELETEXT REVEAL
ONE/TWO-DIGIT CHANNEL
SELECTION/
TELETEXT PAGE HOLD
TUNER OR CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION/
TELETEXT MODE SELECTION
(LIST/FLOF)
NEXT CHANNEL/
TELETEXT NEXT PAGE
MENU DISPLAY/
PROGRAMME SELECTION BY NAME
VOLUME INCREASE
VOLUME DECREASE
TEMPORARY SOUND SWITCH-OFF
PREVIOUS CHANNEL\
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
SOUND MODE SELECTION/
TELETEXT SUB-PAGE
PICTURE SIZE/
PICTURE MENU DISPLAY
TELETEXT SIZE SELECTION
PICTURE EFFECT SELECTION
TURBO SOUND
SOUND MENU DISPLAY
(EQUALIZER)
SOUND EFFECT SELECTION
FASTEXT TOPIC SELECTION
The performance of the remote control may be affected by bright light.
➢
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you:
N Purchase the television
N Find that the remote control is no longer operating
correctly
1
2
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
N
N
-
+
on the battery against
on the battery against
-
on the remote control
+ on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Aerial or Cable Television Network
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
N An outdoor aerial
N A cable television network
N A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
Rear of the TV
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
or
For further details, refer to:
Cable Television
Network
N
“Storing Channels Automatically ” on page 14
N
“Storing Channels Manually” on page 16
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
1
2
3
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
➢
Press the “ ” button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
Press the POWER ( ) button on the remote control to switch the
television on.
Result:
The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
➣
4
To switch your television off, press the “ ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
N Power consumption
N Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
)
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
☛
example). Turn your television off by pressing the “
”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
N Change channels and adjust the volume
N Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
PIP
Button
Viewing Function
Menu Function
Used to display the next
stored channel.
Used to select the previous
menu option.
P
P
Used to display the
previous stored channel.
Used to select the next menu
option.
to
Used to display the corresponding channels.
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to decrease the
volume.
Used to...
N Display a submenu
containing selections for
the current menu option.
N Search backwards
manually for channels
N Reduce a menu option
value.
Used to increase the
volume.
Used to...
N Display a submenu
containing selections for
the current menu option.
N Search forwards
manually for channels
N Increase a menu option
value.
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
➣
press the
-
or
+
button.
MENU
TV
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play Feature
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
1
2
If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Ant. Input : Check
Result:
The message Plug & Playis displayed. It flickers for
a little while and then Languagemenu is automatically
displayed.
Select
Exit
Select the appropriate language by pressing the
or
button. Press the MENU button to enter the language.
Auto store
: ASIA W/EUROPE
Area
Search
Result: The message Ant. Input : Checkis displayed.
-
:
/+
If any language is not selected on the Languagemenu, the
Languagemenu will disappear about 30 seconds later.
➣
3
4
Make sure that the antenna is connected to the TV. Press the
button.
-
or
+
Select
Adjust
Exit
Result:
The Auto storemenu is displayed with Areais
selected.
Time
Select your area by pressing the
channels, select Searchby pressing the
-
or
+
button. To search the
or button, and
button. Press the MENU button to stop the
Clock
Timer
: -- : -- am
: Off
then press the
search.
-
or
+
Result:
The Timemenu is displayed with Clockis selected.
Refer to “Storing Channels Automatically” on page 14.
➣
Select
Adjust
Exit
5
6
7
Press the
hour or minute by pressing the
-
or
+
button to move to the hour or minute. Set the
or button.
Refer to “Setting and Displaying the Current Time” on page
30.
➣
ENJOY YOUR WATCHING
When you have finished, press the MENU button.
Result:
The message ENJOY YOUR WATCHINGis displayed,
and then the channel which has been stored will be
activated.
Function
Language : English
Time
If you want to reset this feature...
❿
Plug & Play
Blue screen
❿
1
2
Press the MENU button.
: On
Demonstration
❿
Press the
press the
or
button to select Function, and then
-
or
+
button.
Select
Enter
Exit
3
Select Plug & Play by pressing the
then press the or button.
or
button, and
-
+
Result:
This feature starts with the message Plug & Play
is displayed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Demonstration
ENG
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
2
Press the MENU button.
Result:
The main menu is displayed.
or button to select Function.
Press the
Result:
The options available in the Functiongroup are
displayed.
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Demonstration.
button.
Function
Language : English
Press the
Result:
or
❿
Time
Plug & Play
Blue screen
❿
Each of the menu options is displayed in turn.
: On
Demonstration
❿
When you wish to exit from the demonstration, press the TV
button on the remote control.
➣
Select
Enter
Exit
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Function
Language
: English
Time
❿
Plug & Play
Blue screen
❿
1
2
Press the MENU button.
: On
Demonstration
❿
Result:
The main menu is displayed.
or button to select Function.
Press the
Result:
Select
Adjust
Exit
The options available in the Functiongroup are
displayed.
3
4
Press the
Result:
-
or
+
button.
The Languageis selected.
Select the appropriate language by pressing the
repeatedly.
-
or
+
button
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Automatically
ENG
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
Channel
Auto store
❿
❿
❿
❿
❿
❿
Manual store
Name
Add/Erase
Fine tune
Sort
1
2
Press the MENU button.
Result:
The main menu is displayed.
or button to select Channel.
Select
Enter
Exit
Exit
Exit
Press the
Result:
The options available in the Channelgroup are
Auto store
displayed.
Area
Search
: ASIA W/EUROPE
-
:
/+
3
4
Press the
Result:
-
-
or
+
button.
The Auto storeis selected.
Press the
Result:
or
+
button again.
The options available in the Auto storegroup are
Select
Adjust
displayed with Areais selected.
5
Select your area by pressing the
displayed in the following order: ASIA W/EUROPE
-
or
+
button. The areas are
CIS E/EUROPE
NZ/INDONESIA SOUTH
Auto store
-
Area
: ASIA W/EUROPE
-
CHINA
-
HONGKONG U/K
-
AUSTRALIA
-
-
-
/+
Search
:
AFRICA
-
AMERICA.
6
7
Press the
or
button to select Search.
Press the
Result:
-
or
+
button to start the search.
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
Select
Search
P 1
106 MHz
7
%
➢
To stop the search before it has finished, press the MENU
button.
8
When searching and storing are complete, the Sortmenu is
displayed.
N
To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 15.
Exit
N
To exit from the channel store function without sorting the
channels, press the MENU button repeatedly until the menus
disappear.
Sort
From
: P 1
: P--
: ?
To
Store
9
When the channels have been stored, you can:
N
N
N
N
N
Sort them in the order required (refer to page 15)
Assign a name to the stored channels (refer to page 18)
Clear a channel (refer to page 19)
Fine tune channel reception if necessary (refer to page 20)
Activate the Digital Noise Reduction feature (refer to page 23)
Select
Adjust
Exit
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
Channel
Auto store
❿
❿
❿
❿
❿
❿
Manual store
Name
1
2
Press the MENU button.
Add/Erase
Fine tune
Sort
Result:
The main menu is displayed.
or button to select Channel.
Press the
Result:
Select
Enter
Exit
Exit
Exit
Exit
The options available in the Channelgroup are
displayed.
Sort
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Sort.
button.
From
To
: P 1
: P--
: ?
Store
Press the
Result:
or
The options available in the Sortgroup are displayed
with Fromis selected.
Select
Adjust
6
7
Select the channel number that you wish to change by pressing
the or button repeatedly.
-
+
Sort
Press the
or
button to select To. Select the new channel
From
To
: P 1
: P 3
: ?
number which you wish to identify by pressing the
repeatedly.
-
or
+
button
Store
You can also select the channel number directly by pressing
the numeric buttons (0~9).
➣
8
9
Press the
or
button to select Store. Select OK to confirm
or button.
Select
Adjust
the exchange of channel numbers by pressing the
-
+
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Sort
From
To
: P 3
: P 1
: OK
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the Fromby pressing the
button.
or
Store
Select
Adjust
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
ENG
You can store up to 100 television channels, including those
received via cable networks.
Channel
Auto store
❿
❿
❿
❿
❿
❿
When storing channels manually, you can choose:
Manual store
Name
N Whether or not to store each of the channels found
Add/Erase
Fine tune
Sort
N The programme number of each stored channel which
you wish to identify
Select
Enter
Exit
1
2
Press the MENU button.
Result:
The main menu is displayed.
or button to select Channel.
Manual store
Colour system
: Auto
: BG
Press the
Result:
Sound system
Search
: 46MHz
: C 1
: P 3
: ?
The options available in the Channelgroup are
Channel
Prog.No.
Store
displayed.
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Manual store.
button.
Select
Adjust
Exit
Press the
Result:
or
Manual store
Colour system
The options available in the Manual storegroup are
: Auto
: BG
displayed with Colour systemis selected.
Sound system
Search
: 46MHz
: C 1
: P 3
: ?
6
Indicate the broadcasting standard required by pressing the
button repeatedly.
-
or
+
Channel
Prog.No.
Store
Result:
The colour standards are displayed in the following
order:
Auto
-
PAL
-
SECAM
-
NT4.43
-
NT3.58.
Select
Adjust
Exit
7
8
Press the
or
button to select Sound system.
Select the sound standard required by pressing the
repeatedly.
-
or
+
button
Result:
The sound standards are displayed in the following
order:
BG DK
-
-
I
-
M.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually (continued)
ENG
9
If you know the number of the channel to be stored, see the
following steps.
Manual store
Colour system
N
N
N
Press the
Press the
Press the
or
button.
or
button to select Channel.
: Auto
: BG
+
Sound system
Search
: 46MHz
: C 1
: P 3
: ?
button to select C(Air channel) or S
Channel
Prog.No.
Store
(Cable channel).
N
N
Press the
+
button.
or
Press the
number.
button to select indicate the required
Select
Adjust
Exit
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➣
Manual store
Colour system
: Auto
: BG
If no sound or abnormal sound, re-select the sound standard
required.
➣
Sound system
Search
: 46MHz
: C 1
: P 3
: ?
Channel
Prog.No.
Store
10 If you do not know the channel numbers, select Searchby
pressing the
search.
or
button. Press the
-
or
+
button to start the
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
Select
Search
Exit
Manual store
Colour system
11 To assign a programme number to a channel, select Prog.No.by
: Auto
: BG
pressing the
or
button. Press the
-
or
+
button to find the
Sound system
Search
correct number.
: 46MHz
: C 1
: P 3
: ?
Channel
Prog.No.
Store
12 To store the channel and associated programme number, select
Storeby pressing the
to select OK.
or
button. Press the
-
or
+
button
Select
Adjust
Exit
13 Repeat Steps 9 to 12 for each channel to be stored.
Manual store
Colour system
Channel mode
☛
: Auto
: BG
Sound system
Search
N P (Programme mode): When completing tuning, the
: 46MHz
: C 1
: P 3
: OK
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
Channel
Prog.No.
Store
N C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
Select
Adjust
Exit
N S or Z (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Names to Channels
ENG
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
Channel
Auto store
❿
❿
❿
❿
❿
❿
Manual store
Name
1
2
Press the MENU button.
Add/Erase
Fine tune
Sort
Result:
The main menu is displayed.
or button to select Channel.
Press the
Result:
Select
Enter
Exit
Exit
Exit
The options available in the Channelgroup are
displayed.
Name
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Name.
button.
P 1 : -----
P 2 : -----
P 3 : -----
P 4 : -----
Press the
Result:
or
The current channels are displayed.
6
If necessary, select the channel to be assigned to a new name by
Select
Adjust
pressing the
or
button.
7
8
Press the
Press the
-
or
+
button.
Name
P 1 : A----
P 2 : -----
P 3 : -----
P 4 : -----
or
button to select a letter (A~Z), a number
(0~9) or a symbol (
-
, space). Move on the previous or next letter
by pressing the or
-
+
button.
9
Repeat Steps
name.
6
to
8
for each channel to be assigned to a new
Adjust
Move
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Unwanted Channels
ENG
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
Channel
Auto store
❿
❿
❿
❿
❿
❿
Manual store
Name
All of the channels that you do not specifically choose to skip are
displayed during scanning.
Add/Erase
Fine tune
Sort
1
2
Press the MENU button.
Select
Enter
Exit
Exit
Exit
Result:
The main menu is displayed.
or button to select Channel.
Press the
Result:
Add/Erase
P 1 : Added
The options available in the Channelgroup are
displayed.
P 2 : Added
P 3 : Added
P 4 : Added
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Add/Erase.
button.
Press the
Result:
or
Select
Adjust
The stored channels are displayed.
Add/Erase
P 1 : Erased
6
7
Press the
or button to select the channel to add or erase.
If necessary, select Addedor Erasedby pressing the
button.
-
or
+
P 2 : Added
P 3 : Added
P 4 : Added
Repeat Step 6 for each channel to be added or erased.
Select
Adjust
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
ENG
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
Channel
Auto store
❿
❿
❿
❿
❿
❿
Manual store
Name
Add/Erase
Fine tune
Sort
1
2
Press the MENU button.
Result:
The main menu is displayed.
or button to select Channel.
Press the
Result:
Select
Enter
Exit
The options available in the Channelgroup are
displayed.
Fine tune
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Fine tune.
button.
-
/+
Tune
:
Store
Erase
: ?
: ?
Press the
Result:
or
The options available in the Fine tunegroup are
displayed with Tuneis selected.
Select
Adjust
Exit
6
To obtain a sharp and clear picture and good sound quality, press
the
-
or
+
button.
Fine tune
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
-
or
+
button.
7
8
To memorise adjusted picture or sound, select Store by pressing
the
or
button. Press the
-
or
+
button.
Fine tune
Result:
OK is displayed.
-
/+
Tune
:
Store
Erase
: OK
: ?
To erase adjusted picture or sound, select Erase by pressing the
or
button. Press the
-
or
+
button.
Result:
OK is displayed.
Select
Adjust
Exit
Fine tune
-
/+
Tune
:
Store
Erase
: ?
: OK
Select
Adjust
Exit
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
Mode
➛
Dynamic
❿
Adjust
❿
1
Press the MENU button.
Scan mode
Digital NR
Tilt
: Natural
: Off
Result:
The options available in the Picturegroup are
displayed.
:
0
LNA
: Off
2
3
Press the
Result:
-
or
+
button.
Select
Adjust
Exit
The Modeis selected.
Select the required picture effect by pressing the
repeatedly.
-
or
+
button
Picture
Mode
➛
Standard
❿
Result:
The following picture effects are available:
Dynamic Standard Movie Custom.
Adjust
Scan mode
Digital NR
Tilt
❿
-
-
-
: Natural
: Off
:
0
You can also set these options simply by pressing the
P.STD (Picture Standard) button.
LNA
: Off
➣
Select
Adjust
Exit
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Settings
ENG
Your television has several settings which allow you to control
picture quality.
Picture
Mode
➛
Dynamic
❿
Adjust
❿
1
Press the MENU button.
Scan mode
Digital NR
Tilt
: Natural
: Off
Result:
The options available in the Picturegroup are
displayed.
:
0
LNA
: Off
2
3
4
Press the
Press the
-
-
or
+
or
+
button.
button to select Adjust.
button.
Select
Enter
Exit
Press the
Result:
or
Adjust
Contrast
Brightness
Sharpness
Color
: 100
The options available in the Adjustgroup are
displayed.
:
:
:
:
50
80
50
50
You can also display this group simply by pressing the
P.MENU (Picture Menu) button.
➣
Color tone
5
Press the
Brightness, Sharpness, Color, Color toneor Tint-NTSC only)
to be adjusted. Press the or button.
or
button to select the option (Contrast,
Select
Adjust
Exit
-
+
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the or button.
-
+
Contrast
100
N If you make any changes to these settings, the picture
➣
standard is automatically switched to Custom.
N The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 42.)
Color tone
Cool
50
Warm
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Picture Settings
ENG
N Scan mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digitaland
Progressivemodes are available.
Picture
Mode
➛
Dynamic
❿
❿
❿
❿
Adjust
❿
Scan mode
Digital NR
Tilt
: Natural
: Off
:
0
LNA
: Off
N Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Select
Adjust
Exit
Picture
Mode
➛
Dynamic
N Tilt
Adjust
Scan mode
Digital NR
Tilt
❿
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting.
: Natural
: Off
:
0
LNA
: Off
N LNA
This feature is very useful in the situation that the TV is used
in a weak signal and amplifies the TV signal in the weak
signal area, but not noise.
Select
Adjust
Exit
This feature is working only in a weak signal condition, and
that is memorized on current channel, additional.
Picture
Mode
Adjust
➛
Dynamic
❿
Scan mode
Digital NR
Tilt
: Natural
: Off
:
0
1
Press the MENU button.
LNA
: Off
Result:
The options available in the Picturegroup are
displayed.
Select
Adjust
Exit
2
3
Press the
-
or
+
button.
Picture
Select the required option (Scan mode, Digital NR, Tiltor
LNA) by pressing the or button.
Mode
Adjust
➛
Dynamic
❿
Scan mode
Digital NR
Tilt
: Natural
: Off
4
Press the
-
or
+
button to change the setting.
:
0
N
N
N
N
Scan mode : Natural, Digitalor Progressive
Digital NR : Offor On (activating)
Tilt : -7to +7
LNA
: Off
Select
Adjust
Exit
LNA : Offor On (activating)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Blue Screen
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
Function
Language : English
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
Time
❿
Plug & Play
Blue screen
❿
: On
Demonstration
❿
1
2
Press the MENU button.
Result:
The main menu is displayed.
or button to select Function.
Select
Adjust
Exit
Press the
Result:
The options available in the Functiongroup are
displayed.
3
4
5
Press the
Press the
-
or
+
button.
button to select Blue screen.
or
To activate this feature, select On by pressing the
-
or
+
button.
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE” button.
Depending on the model, the following picture sizes are available:
N Normal, Zoom1, Zoom2, 16:9.
(29Z4/34Z4/29Z6/34Z6/29Z7/34Z7)
N Wide, Panorama, Zoom1, Zoom2, Normal.
(32Z6/32Z7)
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL PICTURE” button.
To return to normal viewing, press this button again.
➣
PIP
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Sound Standard
ENG
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
Mode
Equalizer
➛
Custom
❿
❿
1
2
Press the MENU button.
Auto volume
Melody
: Off
: On
: Off
: Off
Result:
The main menu is displayed.
or button to select Sound.
Pseudo stereo
Virtual surround
Press the
Result:
The options available in the Soundgroup are
Select
Adjust
Exit
displayed.
3
4
Press the
Result:
-
or
+
button.
Sound
The Modeis selected.
Mode
➛
Standard
❿
Equalizer
❿
Select the required sound effect by pressing the
repeatedly.
-
or
+
button
Auto volume
Melody
: Off
: On
: Off
: Off
Pseudo stereo
Result:
The following sound effects are available:
Custom Standard Music Movie Speech(SVE).
Virtual surround
-
-
-
-
N
SVE : SAMSUNG Voice Enhancement Technic
Select
Adjust
Exit
You can also set these options simply by pressing the
S.STD (Sound Standard) button.
➣
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
ENG
The sound settings can be adjusted to suit your personal preferences.
Sound
Mode
Equalizer
➛
Custom
❿
1
2
Press the MENU button.
❿
Auto volume
Melody
: Off
: On
: Off
: Off
Result:
The main menu is displayed.
or button to select Sound.
Pseudo stereo
Press the
Result:
Virtual surround
The options available in the Soundgroup are
displayed.
Select
Enter
Exit
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Equalizer.
button.
Equalizer
R
L
Press the
Result:
or
The options available in the Equalizergroup are
displayed.
100 300 1K 3K 10K
You can also display this group simply by pressing the
S.MENU (Sound Menu) button.
➣
Adjust
Move
Exit
6
Select the option to be adjusted by pressing the
Press the or button to reach the required setting.
-
or
+
button.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
➣
Selecting the Turbo Sound
This feature suitably emphasizes both higher and lower bands of
sound (and includes other effects).
You can enjoy more magnificent and dynamic sound when
watching music, movie, or other channel simply by pressing the
“TURBO” button.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra Sound Settings
ENG
N Auto volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Sound
Mode
Equalizer
➛
Custom
❿
❿
❿
❿
❿
Auto volume
Melody
: Off
: On
: Off
: Off
Pseudo stereo
Virtual surround
N Melody
Select
Adjust
Exit
You can hear clear melody sound when the television is
powered on or off.
Sound
Mode
➛
Custom
N Pseudo stereo / Virtual surround
Equalizer
❿
Pseudo stereofeature converts a monaural sound signal
into two identical left and right channels.
Auto volume
Melody
: Off
: On
: Off
: Off
Pseudo stereo
Once the Pseudo stereoor Virtual surround is set to
On or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech.
Virtual surround
Select
Adjust
Exit
Sound
1
Press the MENU button.
Mode
➛
Custom
Equalizer
❿
Result:
The main menu is displayed.
or button to select Sound.
Auto volume
Melody
: Off
: On
: Off
: Off
2
Press the
Result:
Pseudo stereo
The options available in the Soundgroup are
Virtual surround
displayed.
Select
Adjust
Exit
3
4
Press the
-
or
+
button.
Select the required option (Auto volume, Melody, Pseudo
Sound
stereoor Virtual surround) by pressing the
or
Mode
➛
Custom
button.
Equalizer
❿
Auto volume
Melody
: Off
: On
: Off
: Off
5
To activate each feature, select On by pressing the
-
or
+
button.
Pseudo stereo
Virtual surround
Manufactured under license from
➣
Select
Adjust
Exit
Dolby Laboratories. “Dolby” and
the double-D symbol ( ) are
trademarks of Dolby Laboratories.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Sound Mode(depending on the model)
ENG
The “S.MODE” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO
NICAM
↔
MONO
(Normal)
NICAM
Stereo
STEREO ↔ MONO
NICAM (Normal)
NICAM Stereo
Dual-I ¡ Dual-II ¡ MONO
NICAM NICAM (Normal)
NICAM Dual-I/II
Regular broadcast
(Standard audio)
MONO (Normal use)
A2
Stereo
Bilingual or Dual-I/II
DUAL-I ↔ DUAL-II
STEREO ↔ MONO
Stereo
(Forced mono)
N If the receiving conditions deteriorate, listening will be
➣
easier if the mode is set to the MONO.
N If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
N When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the S.MODE button.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
ENG
You can select a time period of between 30 and 180 minutes after
the television automatically switches to Standby mode by pressing
the “SLEEP” button.
1
Press the SLEEP button on the remote control.
Result: If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the screen displays
the remaining time and then before the television will
be placed in standby mode.
PIP
2
3
Press the SLEEP button repeatedly and cycle through the preset
time intervals (30, 60, 90, 120, 150, 180).
Result:
The television automatically switches to standby mode
when the timer reaches 0.
To cancel the sleep timer feature, press the SLEEP button
repeatedly and select Off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current Time
ENG
You can set the television’s clock so that the current time is displayed
by pressing the “DISPLAY” button. You must also set the time if you
wish to use the automatic on or off timers.
Function
Language : English
Time
❿
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
➣
Plug & Play
Blue screen
❿
: On
Demonstration
❿
1
2
Press the MENU button.
Select
Enter
Exit
Result:
The main menu is displayed.
or button to select Function.
Press the
Result:
Time
The options available in the Functiongroup are
Clock
Timer
: -- : -- am
: Off
displayed.
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Time.
button.
Press the
Result:
or
Select
Adjust
Exit
The options available in the Timegroup are displayed
with Clockis selected.
Time
Clock
Timer
: 11 : 30 am
: Off
6
Press the
hour or minute by pressing the
-
or
+
button to move to the hour or minute. Set the
or button.
7
8
When you have finished, press the TV button to exit.
To...
Press the “DISPLAY” button...
display the channel information
display the current time
remove the display
Once.
Twice.
Select
Adjust
Exit
Three times.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Television On and Off Automatically
ENG
You can set the On/Off timers so that the television will:
N Switch on automatically and tune to the channel of your
Function
Language : English
choice at the time you select
Time
❿
N Switch off automatically at the time you select
Plug & Play
Blue screen
❿
: On
Demonstration
❿
The first step is to set the television’s clock (refer to
➣
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock,
the message Set the clock firstis displayed.
Select
Enter
Exit
1
2
Press the MENU button.
Time
Clock
Timer
: 11 : 32 am
: Off
Result:
The main menu is displayed.
Press the
Result:
or
button to select Function.
The options available in the Functiongroup are
displayed.
Select
Adjust
Exit
3
4
5
Press the
Press the
-
-
or
+
or
+
button.
button to select Time.
button.
Time
Press the
Result:
or
Clock
Timer
: 11 : 32 am
: On
The options available in the Timegroup are displayed.
On time
: -- : -- am
: -- : -- am
Off time
6
7
Press the
or
button to select Timer.
button to set On
Press the
Result:
-
or
+
The On timeand Off timeare displayed.
Select
Adjust
Exit
8
9
Press the
or button to select On time. Set the time at
which you wish the television to be switched on automatically.
Time
Clock
: 11 : 33 am
: On
N
Press the or button to move to the hour, minute or am/pm.
-
+
Timer
Set these by pressing the or button.
On time
Off time
: 06 : 30 am
: -- : -- am
Press the
or
button to select Off time. In the same
above, set the time at which you wish the television to be switched
off automatically.
Select
Adjust
Exit
Time
Clock
: 11 : 33 : 52
: On
Timer
On time
Off time
: 06 : 30 am
: 11 : 00 pm
Select
Adjust
Exit
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) : Option
ENG
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR or DVD. In this way you can
watch TV program or monitor the video input from any connected
devices while watching TV or other video input.
PIP
PIP
: Off
1
Press the MENU button.
Result:
The main menu is displayed.
Select
PIP
Adjust
Adjust
Adjust
Adjust
Exit
2
3
Press the
or
button to select PIP. Press the
-
or
+
button.
Press the
Result:
-
or
+
button again to set On.
PIP
The options available in the PIPgroup are displayed.
: On
: TV
: P 1
Select
4
5
Press the
picture by pressing the
or
button to select Select. Find a source of sub
or button.
Prog.No.
Size
-
+
: Double
Result:
The sources are displayed in the following order:
TV
-
AV1
-
AV2
-
AV3
-
S-VIDEO.
Select
Exit
Press the
or
button to select Prog.No.. If you are
watching TV program, select the channel that you want to view
through a sub picture by pressing the or button.
-
+
PIP
When the source of the sub picture (Select) is set to TV,
you can select the channel of the sub picture.
➣
PIP
: On
Select
Prog.No.
Size
: TV
: P 1
: Double
6
Press the
picture by pressing the
or
button to select Size. Select a size of sub
or button.
-
+
Result:
The sizes are displayed in the following order:
Double Large Small 16 PIP.
-
-
-
Select
Exit
N
16 PIP : You can view up to 16 memorized channels
➣
on the sub picture spontaneously.
PIP
N
On the condition of 16 PIP, it is impossible to execute
PIP
: On
swap, still and locate.
Select
Prog.No.
Size
: TV
: P 1
: Double
Select
Exit
PIP
PIP
: On
Select
Prog.No.
Size
: TV
: P 1
: Double
Select
Adjust
Exit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP) : Option (continued)
ENG
Easy functions of remote control
Buttons
PIP ON
SWAP
Feature
Used to activate or deactivate the PIP function directly.
Used to interchange the main picture and the sub picture.
When the main picture is in the Video mode and the
➣
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the SWAP
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
PIP
STILL
SIZE
Used to select the channel of sub picture.
Used to select a size of sub picture (Double, Large,
Small, or 16 PIP).
PL/M
Used to select the channel of sub picture.
LOCATE
SCAN
Used to move the sub picture counterclockwise.
Used to scan every memorized channel in order. To stop
scanning, press it again.
TV/VIDEO
Used to assign a source of sub picture (TV, AV1, AV2,
AV3, or S-VIDEO).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature
ENG
Most television channels provide written information services via
teletext. Information provided includes:
N
N
N
N
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
➣
N Entering the page number
N Selecting a title in a list
N Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
☛
N Information may be missing
N Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the
button.
or
Press the TTX/MIX button to activate the teletext mode.
Result:
The contents page is displayed. It can be redisplayed
at any time by pressing the (index) button.
3
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX button again.
Press the TTX/MIX button again to exit from the teletext display.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Page by Number
ENG
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
resume.
(hold). Press the
(hold) again to
Using the various display options:
To display...
Press the...
N
Both teletext information and
the normal broadcast
TTX/MIX twice
N
Hidden text
(reveal)
(answers to quiz games, for example)
N
N
The normal screen
(reveal) again
(sub-page)
A secondary page,
by entering its 4-digit number
N
N
The next page
(page up)
The previous page
(page down)
N
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
N
Normal screen
• Three times
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using FLOF to Select a Page
ENG
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
2
Display the teletext contents page by pressing the TTX/MIX
button.
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
4
To display the previous or next page, press the corresponding
coloured button.
To display the subpage, see the following steps.
N
Press the
Result:
(sub-page) button.
The available subpages appear.
N
Select the required sub-page. Sub-pages can be scrolled by
using the or button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Teletext Pages
ENG
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
button.
Result:
Four 3-digit numbers are displayed in different
colours.
The
FLOF modes.
button is used to switch between the LIST and
➣
2
Press the coloured button corresponding to the page that will be
replaced.
3
4
Enter the new page number using the numeric buttons.
Repeat steps
2
and
3
for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the External Input/Outputs
ENG
VCR
Rear of the TV
x
y
Decoder /
Video game device
Video disc player
Satellite receiver
z
N
“MONITOR OUT” is used for the audio/video output of current television programme.
x
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “AV-2 INPUT”
and the target VCR to “MONITOR OUT” so that you can redirect the signal from “AV-2 INPUT” to
“MONITOR OUT”
.
y
z
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to “AV-2 INPUT” and the VCR to “MONITOR
OUT” so that you can redirect the signal from “AV-2 INPUT” to “MONITOR OUT”
.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
☛
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the DVD Player or Digital Set-Top Box
ENG
Rear of the TV
DVD
Digital Set-Top Box
N
Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player or Digital Set-Top Box. Connect the RCA Cable to “Y”, “PB”, and “PR” on
the rear of your television and the other end to the “Component Video Out (Y, PB, PR)” connectors of the
DVD player or Digital Set-Top Box.
N
N
If you wish to connect both the DVD player and Digital Set-Top Box, you should connect the Digital Set-
Top Box to the “Component1 Input” and connect the DVD player to the “Component2 Input”.
Only black signal is output from a monitor in Componet1 or Componet2 mode.
Connecting to the Audio Output
Rear of the TV
➢
The “MONIOR OUT” (AUDIO) connectors are used
for equipment, such as an audio system (to take full
advantage of the Surround sound effect).
Audio system
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the RCA Input
ENG
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment
with an S-Video output, such as a camcorder or VCR.
Side of the TV
x
Camcorder
VCR
and
x
To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
When both the side and rear connectors are connected to
external equipments, the side connectors receives priority.
➣
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Headphones
ENG
You can connect a set of headphones to your television if you wish
to watch a television programme without disturbing the other
people in the room.
Side of the TV
1
2
Plug a set of headphones into the 3.5 mm mini-jack socket of the
television.
Result:
The sound is heard through the headphones.
When you wish to hear the sound through the speakers again,
simply disconnect the headphones.
Prolonged use of headphones at a high volume may
damage your hearing.
➣
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
2
Check that all the necessary connections have been made.
Switch your television on, then press the VIDEO button
repeatedly.
Result:
The input sources are displayed in the following
order:
AV1
-
AV2
-
AV3
-
S-VIDEO
-
Component1
-
Component2.
Depending on the source selected, the pictures may appear
automatically.
➣
N To watch television programmes again, press the TV
➣
button and select the number of the channel required.
N If you press the VIDEO button watching television
programmes, your television is switched the last
external input.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Degaussing to Remove Colour Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
N Switch the television off by pressing the “ ” (On/Off) button on the front panel
N Unplug the television from the wall socket
N Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER ” button on the remote control.
☛
If your television will be left unattended, press the “ ” (On/Off) button to turn your
television off.
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
N
N
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
N
N
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
N
N
Check the volume.
Check whether the volume MUTE button on the remote control has
been pressed.
No picture or black and white picture
Sound and picture interference
N
N
Adjust the colour settings.
Check that the broadcast system selected is correct.
N
N
N
Try to identify the electrical appliance that is affecting the television,
then move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
N
N
N
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
ENG
43
Download from Www.Somanuals.com. All Manuals Search And Download.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service
agent if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-02452A-01 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
|