Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Samsung Electronics America,Inc.
105 Challenger Road
Ridgefield Park,NJ 07660-0511
1-800-SAMSUNG (7267864)
AK68-01357A
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Consult the dealer or an experienced radio/TV
technician for help.
This class B digital apparatus meets all
requirements of the Canadian Interference --
Causing Equipment Regulations.
Warning
CLASS 1
LASER PRODUCT
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
Note:
• This unit can be used only where the power supply is
AC 120V, 60Hz. It cannot be used elsewhere.
Do not install this equipment in a confined space such
as a bookcase or similar unit.
•
This Blu-ray disc player is designed and manufactured
to respond to the Region Management Information.
If the Region number of a BD/DVD disc does not
correspond to the Region number of this Blu-ray disc
player, the Blu-ray disc player cannot play the disc.
WARNING
To prevent damage which may result in fire or electric
shock hazard, do not expose this appliance to rain or
moisture.
• The product unit accompanying this user manual is
licensed under certain intellectual property rights of
certain third parties. This product is covered by one or
more of the following U.S. patents:
Note to CATV system installer
This reminder is provided to call CATV system installer’s
attention to Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417
6,043,912 6,222,983 6,272,096 6,377,524 6,377,531
6,385,587 6,389,570 6,408,408 6,466,532 6,473,736
6,477,501 6,480,829 6,556,520 6,556,521 6,556,522
6,578,163 6,594,208 6,631,110 6,658,588 6,674,697
6,674,957 6,687,455 6,697,307 6,707,985 6,721,243
6,721,493 6,728,474 6,741,535 6,744,713 6,744,972
6,765,853 6,765,853 6,771,890 6,771,891 6,775,465
6,778,755 6,788,629 6,788,630 6,795,637 6,810,201
6,862,256 6,868,054 6,894,963 6,937,552
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on.
This product is covered by the following U.S. patents:
US4,930,158 US4,930,160
This license is limited to private non-commercial use
by end-user consumers for licensed contents.
No rights are granted for commercial use. The license
does not cover any product unit other than this
product unit and the license does not extend to any
unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit.
The license only covers the use of this product unit to
encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are
granted under this license for product features or
functions that do not conform to the ISO/IEC 11172-3
or ISO/IEC 13818-3.
The user is encouraged to try to correct the interference
by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
•
Connect this equipment into an outlet on a circuit
different from that to which the receiver is connected.
2 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Cautions
Precautions
• Before connecting other components to this Blu-ray
disc player, be sure to turn them all off.
•
Do not move the Blu-ray disc player while a disc is being
played, or the disc may be scratched or broken, the
Blu-ray disc player internal parts may be damaged.
Important Safety Instructions
• Do not put a flower vase filled with water or any small
metal objects on the Blu-ray disc player.
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
• Be careful not to put your hand into the disc tray.
•
Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static
electricity can affect normal operation of this Blu-ray
disc player. If this occurs, turn the Blu-ray disc player
off and on again with the POWER button, or
disconnect and then reconnect the AC power cord to
the AC power outlet. The Blu-ray disc player will
operate normally.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
• Be sure to remove the disc and turn off the Blu-ray
disc player after use.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
• Disconnect the AC power cord from the AC outlet
when you don’t intend to use the Blu-ray disc player
for long periods of time.
8) Do not install near any heat sources such as
radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
• Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power
cord from the AC outlet.
11) Only use attachments/accessories specified by
the manufacturer.
•
Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
12) Use only with the cart, stand,
tripod, bracket, or table specifi
ed by the manufacturer, or sold
with the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury from
tip-over.
Restrictions on Playback
•
•
This player may not respond to all operating commands
because some BD, DVD or CD discs allow specific or
limited operation and features during playback.
Please note that this is not a defect in the player.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
Samsung cannot assure that this player will play every
disc bearing the BD, DVD and CD logos because disc
formats may evolve, and problems and errors can occur
during the creation of BD, DVD and CD software and/or
the manufacture of discs.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
This player also operates differently than a standard DVD
player or other AV equipment. Please contact the
SAMSUNG customer care center if you have questions or
encounter difficulty in playing BD, DVD or CD discs in this
player. Also, refer to the rest of this Manual for additional
information on playback restrictions.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic planes
Two individual, full HD resolution (1920x1080) video
layers are available, on top of the HD video layer.
One layer is assigned to video-related graphics (like
subtitles), and the other layer is assigned to
interactive elements, such as buttons or menus.
Various wipes, fades and scroll effects may be
available on both layers.
General Features
Player Features
Digital Photo Viewer (JPEG)
You can enjoy digital photos on your TV.
MP3 Playback
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
This unit can play mp3 files from CD-R/-RW, DVD-R/-
RW/-RAM discs.
Graphic
Planes
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure digital
video/audio signal path from the player to your TV.
3
4
5
6
7
8
9
10 11 12 13 14 15
Blu-ray Disc Features
HD Video
Blu-ray Discs can store 25 GB (single layer) or 50 GB
(dual layer) on a single sided disc - about 5 to 10
times the capacity of a DVD.
Blu-ray Discs also support the highest quality HD
video available in the industry (up to 1920 x 1080 at
40 Mbit/sec) - Large capacity means no compromise
on video quality. Furthermore, a Blu-ray Disc has the
same familiar size and look as DVD.
Menu graphics
Support 256 full color resolution graphics and
animation, thereby greatly surpassing the capabilities
of DVD-Video. Unlike DVD, Menus can be accessed
during video playback.
* The following Blu-ray Disc features are disc
dependant and will vary.
Appearance and navigation of features will also vary
from disc to disc.
Menu sounds
When you highlight or select a menu option on a
Blu-ray disc, sounds can be heard such as button
clicks or a voice-over explaining the highlighted menu
choice.
Not all discs will have the features described below.
Video highlights
The BD-ROM format for movie distribution supports
three highly advanced video codecs, including AVC,
VC-1, and MPEG-2.
Multi-page/PopUp Menus
HD video resolutions are also available:
- 1920 x 1080 HD
- 1280 x 720 HD
With DVD-Video, playback is interrupted each time a
new menu screen is accessed. Due to Blu-ray Disc's
ability to preload data from the disc without interrupting
playback, a menu may consist of several pages.
You can browse through the menu pages or select
different menu paths, while the audio and video
remain playing in the background.
For High-Definition Playback
To view high-definition contents in BD discs, an
HDTV (High Definition Television) is required. Some
discs may require using the player's HDMI OUT to
view high-definition content. The ability to view
high-definition content on BD discs may be limited
depending on the resolution of your TV.
4 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Reading the
PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS
User’s Manual
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Interactivity
Icon
Term
Definition
Certain Blu-ray Discs may contain Animated menus
and Trivia games.
This involves a function available
on a BD-ROM.
BD-ROM
User Browsable Slideshows
This involves a function available
on a BD-RE.
BD-RE
BD-R
With Blu-ray Discs, you can browse through various
still pictures while the audio remains playing.
This involves a function available
on a BD-R.
Subtitles
This involves a function available
on DVD-Video or DVD-R/DVD-RW
discs that have been recorded
and finalized in Video Mode.
Depending on what is contained on the Blu-ray Disc,
you may be able to select different font styles, sizes
and colors for the subtitles, Subtitles may also be
animated, scrolled or faded in and out.
DVD-VIDEO
DVD-
RAM
This involves a function available on
DVD-RAM.(VR mode, Standard Version 2.0 only)
DVD-
RW
This involves a function available on
DVD-RW.(VR mode, or V mode and finalized only)
DVD-
R
This involves a function available on
DVD-R.(V mode and finalized only)
This involves a function available
on a data CD (CD-R or CD-RW).
Audio CD
JPEG
This involves a function available
on CD-R/-RW, DVD-R/-RW/
-RAM discs.
This involves a function available
on CD-R/-RW, DVD-R/-RW/
-RAM discs.
MP3
This involves a case where a function does
not operate or settings may be cancelled.
Caution
Note
This involves tips or instructions on the
page that help each function operate.
One-Touch A function that can be operated
button by using only one button.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~3)
2) If a problem occurs, check the Troubleshooting. (See pages 50~51)
Copyright
©2007 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or
copied without the prior written permission of Samsung Electronics Co.,Ltd.
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Getting Started
Playback
Warning .................................................................2
Precautions ...........................................................3
Important Safety Instructions ............................3
Handling Cautions................................................3
Maintenance of Cabinet.......................................3
General Features...................................................4
Before Reading the User’s Manual.....................5
Disc Type and Characteristics ............................7
Disc Storage & Management .............................10
Description.............................................................11
Front Panel ............................................................11
Rear Panel .............................................................12
Front Panel Display ..............................................12
Tour of the Remote Control.................................13
Unpacking..............................................................14
Before Playing.......................................................23
Playing a Disc........................................................24
Using the Search & Skip Functions...................24
Slow Motion Play/Step Motion Play ...................25
Using the Display Function.................................25
Using the Disc Menu & Popup/Title Menu ........26
Repeat Play............................................................27
Selecting the Audio Language............................27
Selecting the Subtitle Language ........................28
Changing the Camera Angle...............................28
Using the Bookmark Function............................29
Playing an Audio CD/ MP3...................................30
Viewing a Picture..................................................33
Using a Mixed disc (JPEG+MP3)........................35
System Setup
Connections
On-Screen Menu Navigation ...............................37
Setting up the Language Options ......................38
Setting up the Audio Options .............................38
Setting up the Speaker Options .........................40
Setting up the Video display/output Options....41
Setting up the HDMI setup options....................43
Setting up the System Upgrade..........................45
Setting up the Parental Lock...............................48
Quick Overview.....................................................16
Output Selection Feature.....................................17
Choosing a Connection.......................................17
Reference
Troubleshooting....................................................50
Specifications........................................................52
6 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that cannot be played
• BD-RE 1.0 Disc
• HD DVD Disc
Disc Type and
Characteristics
• DVD-Video with a region number other than “1” or “ALL”
• 5 inch 2.6 GB and 5.2 GB DVD-RAM
• 3.9 GB DVD-R Disc for Authoring.
• DVD-RAM/-RW(VR mode) not recorded following the
Video Recording Standard
Disc types that can be played
• DVD-ROM/PD/MV-Disc, etc
• CVD/CD-ROM/CDV/CD-G/CD-I/LD
Max. Playing
minute
Disc Types
Disc Logo Recorded content
AUDIO + VIDEO
Disc Shape
[Note]
BD-ROM
BD-RE
BD-R
-
•
Some commercial discs and DVD discs purchased
outside your region may not be playable with this product.
When these discs are played, either “No disc.” or “Please
check the regional code of the disc.” will be displayed.
Single sided
(25GB/50GB)
Single sided(5 inches)
Double sided(5 inches)
Single sided(3 1/2 inches)
Double sided(3 1/2 inches)
Single sided(5 inches)
240
480
80
160
74
DVD-VIDEO
AUDIO + VIDEO
AUDIO
• If a DVD-R/-RW/-RAM disc has not been recorded
properly in DVD video format, it will not be playable.
AUDIO-CD
Single sided(3 1/2 inches)
20
Region code
Single-sided
5 inches (4.7GB)
480
Both the Blu-ray disc player and the discs are coded by
region. These regional codes must match in order to play
the disc. If the codes do not match, the disc will not play.
The Region Number for this Blu-ray disc player is
DVD-RAM
(EX : Extended Play)
(VR mode,
Standard
Version 2.0
only)
AUDIO + VIDEO
described on the rear panel of the Blu-ray disc player.
Double-sided
5 inches (9.4GB)
960
(EX : Extended Play)
Disc Type
Blu-ray
DVD-Video
DVD-RW
(VR mode, or
V mode and
finalized only)
480
Region
code
AUDIO + VIDEO
AUDIO + VIDEO
5 inches (4.7GB)
(EX : Extended Play)
DVD-R
BD Region Code
Area
(V mode
and finalized
only)
480
5 inches (4.7GB)
-
North America, Central America, South
America, Korea, Japan, Taiwan, Hong Kong
and South East Asia.
(EX : Extended Play)
A
CD-R/-RW
DVD-RAM/
-RW/-R
Europe, Greenland, French territories,
Middle East, Africa, Australia and New
Zealand.
JPEG
MP3
-
B
C
India, China, Russia, Central and South
Asia.
•
•
This player can play pictures of NTSC color system only
Pal discs will not play.
Logos of Discs that can be played
Blu-ray Disc
Digital Audio
Dolby Digital
DTS
Java
NTSC broadcast
system in U.S.A,
Canada, Korea, Japan
MP3
Stereo
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
BD-RE
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc
compatibility issues are possible. Not all discs are compatible
and not every disc will play back. For additional information,
refer to the Compliance and Compatibility Notice section of
this Manual. If you encounter compatibility problems, please
contact the SAMSUNG customer care center. This Samsung
Blu-ray disc player (BD-P1200) supports only the BD-ROM
Profile 1 version 1.0 specification. If you want to play later
version discs, you may need to update player's firmware.
Blu-ray Disc Rewritable. A BD-RE disc can be recorded
over and over again. It offers extensive editing
functionality on the disc.
BD-R
Blu-ray Disc Recordable. A BD-R disc can be recorded
once, and cannot be accidentally erased. BD-R is the
ideal format for archiving valuable data or storing and
distributing personal video material. This unit can play
back BD-R discs with video recording for time shifting
purposes.
SAMSUNG customer care center at 1-800 SAMSUNG.
DVD-Video
ꢀꢀ
ꢀꢀ
This Blu-ray disc player supports discs that
are compatible with DVD-RAM Standard
Version 2.0.
Playback may not work for some types of
discs, or when specific operations, such as
angle change and aspect ratio adjustment,
are being performed. Information about the
discs is written in detail on the box. Please
refer to this if necessary.
Do not allow the disc to become dirty or
scratched. Finger prints, dirt, dust, scratches
or deposits of cigarette smoke on the
recording surface may make it impossible to
use the disc for playback.
Discs with PAL programs recorded on them
cannot be played using this product.
• A digital versatile disc (DVD) can contain up to 135-
minutes of images, 8 audio languages and 32 subtitle
languages. It is equipped with MPEG-2 picture
compression and Dolby Digital surround, allowing you
to enjoy vivid and clear theatre quality images.
NOTE
• When switching from the first layer to the second layer
of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is
not a malfunction of the unit.
ꢀꢀ
• Once a DVD-RW/-R recorded in Video Mode is
finalized, it becomes DVD-Video. Pre-recorded (pre-
stamped) commercial DVDs with movies are also
referred to as DVD-Videos. This unit can play back
pre-recorded commercial DVD discs (DVD-Video
discs) with movies.
ꢀꢀ
ꢀꢀ
when a BD-Java title is played, loading may
take longer than a normal title, or some
functions may perform slowly.
Audio CD
• An audio disc on which 44.1kHz PCM Audio is
recorded.
• This unit can play back CD-DA format audio CD-R and
CD-RW discs.
• The unit may not be able to play some CD-R or
CD-RW discs due to the condition of the recording.
Disc Types
BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc
contains pre-recorded data. Although a BD-ROM may
contain any form of data, most BD-ROM discs will contain
movies in High Definition format, for playback on Blu-ray
disc players. This unit can play back
pre-recorded commercial BD-ROM discs.
8 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-R/-RW
Using JPEG disc
• Use a 700MB(80 minutes) CD-R/-RW disc. If possible,
do not use a 800MB(90 minutes) or above disc, as the
disc may not play back.
• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF,
ISO9660 or JOLIET format can be played back.
• Only JPEG files with the ".jpg", ".JPG", ".jpeg" or
"JPEG" extension can be displayed.
• If the CD-R/-RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded files may not play.
• Some CD-R/-RW discs may not be playable with this
unit, depending on the device which was used to burn
them. For contents recorded on CD-R/-RW media
from CDs for your personal use, playability may vary
depending on contents and discs.
• Progressive JPEG is supported.
DVD-RAM/-RW (VR)
• This is a format that is used for recording data on a
DVD-RAM/-RW disc.
DVD-RW/-R (V)
DVD-R Disc Playback
• This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played by
this Blu-ray disc player once it has been finalized.
• If a disc that has been recorded in Video Mode by a
different maker’s recorder but has not been finalized,
it cannot be played by this Blu-ray disc player.
• Once a DVD-R recorded in Video Mode is finalized,
it becomes DVD-Video.
• This unit can play back DVD-R discs recorded and
finalized with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on
the disc and the condition of the recording.
DVD-RW Disc Playback
• Playback can be performed with DVD-RW discs in
both the Video and VR Modes.
• Once a DVD-RW recorded in Video Mode is finalized,
it becomes DVD-Video. Ability to play back may
depend on recording conditions.
DVD-RAM Disc Playback
• You cannot play a DVD-RAM in most DVD
components due to compatibility issues.
• Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
• For cartridge type DVD-RAM discs, remove the
cartridge and use the disc only.
Disc Format
Using MP3 disc
• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF,
ISO9660 or JOLIET format can be played back.
• Only MP3 files with the “.mp3” or “.MP3” extension
can be played.
• Playable bit-rate range is from 56 Kbps to 320 Kbps.
•
Playable sample-rate is 16KHz to 48KHz.
• The unit can handle a maximum of 1500 files and
folders under a parent folder.
For MP3 files recorded with a VBR(Variable Bit
Rates), the sound may cut in and out.
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Storage
Disc Storage &
Management
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
• If you move your Blu-ray disc player suddenly from a
cold place to a warm place, condensation may
generate on the operating parts and lens and cause
abnormal disc playback. If this occurs, do not connect
the plug to the power outlet and wait for two hours.
Then insert the disc and try to play back again.
Disc Handling
• Use discs with regular shapes.
If an irregular disc (a disc with
a special shape) is used, this
Blu-ray disc player may be
damaged.
Holding discs
• Avoid touching the surface of a disc
where recording is performed.
Blu-ray Discs
• If the player is not used for a long period of time, remove
the Blu-ray Disc from the player and store it in its case.
• Be careful not to leave fingerprints or scratches on the
surface of the Blu-ray Disc.
DVD-RAM, DVD-RW and DVD-R
• Clean with an optional DVD-RAM/PD disc cleaner
(LF-K200DCA1 where available). Do not use cleaners or
cloths for CDs to clean DVD-RAM/-RW/-R discs.
DVD-Video, Audio-CD
• Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
• Do not write on the printed side with a
ball-point pen or pencil.
• Do not use record cleaning sprays or
antistatic.
Also, do not use volatile chemicals, such
as benzene or thinner.
• Do not apply labels or stickers to discs. (Do not use
discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available
on the market.
• Do not load warped or cracked discs.
10 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Front Panel
1. POWER BUTTON
8. STOP BUTTON
Turns the Blu-ray disc player on and off.
Stops disc playback.
2. STANDBY INDICATOR
When the unit is first plugged in,
this indicator lights.
9. OUTPUT SELECT BUTTON
Choose video output from HDMI or
COMPONENT or VIDEO/S-VIDEO.
3. DISC TRAY
10. VIDEO OUT INDICATORS
Opens to accept a disc.
- HDMI INDICATOR : Lights when HDMI OUT
mode is selected.
4. OPEN/CLOSE BUTTON
- COMP INDICATOR : Lights when
COMPONENT OUT mode is selected.
- VIDEO INDICATOR : Lights when VIDEO or
S-VIDEO OUT mode is selected.
Opens and closes the disc tray.
5. DISPLAY
Displays the playing status, time, etc.
11. Remote Control Sensor
6. SEARCH/SKIP BUTTONS
Goes to the next title/chapter/track or goes
back to the previous title/chapter/track.
7. PLAY/PAUSE BUTTON
Plays a disc or pauses playback.
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Fan
The fan always revolves when the power is on.
Ensure a minimum of 4 inches of clear space on
all sides of the fan when installing the product.
1. 5.1CH ANALOG AUDIO OUT
Connect to a 5.1CH analog input on an
A/V amplifier
6. HDMI OUT
Use the HDMI cable, connect this HDMI output
terminal to the HDMI input terminal on your TV
for the best quality picture.
2. AUDIO OUT
Connects to the audio input of external
equipment using audio cables.
7. LAN
Connect this LAN terminal to the LAN terminal on
your modem for software upgrades.
3. VIDEO OUT
Connects the input of external equipment using a
video cable.
8. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
4. S-VIDEO OUT
Connects the input of external equipment using
an S-Video cable.
9. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
5. COMPONENT VIDEO OUT
Connects to equipment having Component
video input.
Front Panel Display
1. Title/PlayList/Track indicator
2. Playing time/clock/current status indicator
3. Playback indicator
4. Pause indicator
5. Video output resolution indicator
6. Disc type indicators.
12 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
11. DISC MENU Button
Use this to enter the disc menu.
17
TV
POWER
12. INFO Button
OPEN/CLOSE POWER
18
1
2
This will display current setting or disc status.
13. COLOR Buttons : RED(A), GREEN (B),YELLOW(C),
BLUE(D)
Allow access to common functions of the Blu-ray disc
player such as the Music or Photo List.
CANCEL
TV INPUT SEL.
STEP
19
14. AUDIO Button
3
SLOW
STOP
Use this to access various audio functions on a disc
(BD/DVD).
4
4
5
6
7
PLAY
20
15. MARKER Button
21
22
Use this to bookmark a position while playing a disc.
TV MUTE
TVVOL
TV CH
16. SUBTITLE Button
8
Press this to switch the BD/DVD’s subtitle language.
MENU
RETURN
23
24
17. OPEN/CLOSE Button
9
To open and close the disc tray.
10
ENTER
18. TV POWER Button
19. TV INPUT SEL. Button
POPUP MENU
TITLE MENU
DISC MENU INFO
EXIT
After setup, allows you to set the input source on your TV.
25
26
11
12
13
14
20. STEP Button
AUDIO SUBTITLE REPEAT
MARKER
Each time this button is pressed, a new frame will
appear.
REPEAT
ZOOM
27
15
16
28
29
21. PLAY/PAUSE Button
Press to play/pause a disc.
22. TV CH Button
Use this to select a TV program.
23. TV MUTE Button
Mutes the speakers of your TV.
24. RETURN Button
1. POWER Button
2. NUMBER Buttons
3. CANCEL Button
25. POPUP MENU/TITLE MENU Button
Use this to enter the popup menu/title menu.
26. EXIT Button
4. REVERSE/FORWARD SKIP Buttons
27. REPEAT A-B Button
Press to skip backwards or forwards.
Allows you to repeat playback of a certain section.
5. SLOW Button
28. ZOOM Button
Each time this button is pressed, the disc will play
slowly.
Enlarges photos on JPEG discs.
6. REVERSE/FORWARD SEARCH Buttons
29. REPEAT Button
Press to search a disc backwards or forwards.
Allows you to repeat a title, chapter, track or disc.
7. STOP Button
Press to stop a disc.
8. TV VOL Buttons
TV volume adjustment
9. MENU Button
Brings up the Blu-ray disc player’s setup menu.
10. ENTER/DIRECTION Buttons (…†œ √ Buttons)
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Accessories
Setting the Remote Control
Check for the supplied accessories below.
You can control certain functions of your TV with this
remote control.
Control function buttons include : TV POWER,
CH
, VOL + -, TV MUTE, TV INPUT SEL. button.
To determine whether your television is
compatible, follow the instructions below.
Composite (Video),
Audio L/R Cable
(MF39-00274A)
Batteries for Remote
Control (AAA Size)
1. Switch your television on.
(4301-000103)
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate number
buttons. (see the next page for the code list).
PO
W
E
R
T
V
O
PE
N
/C
L
O
S
E
PO
W
E
R
C
A
N
C
E
L
T
V I
N
PUT S
EL.
S
L
OW
S
T
E
P
S
T
OP
PL
A
Y
Instruction Manual
T
V M
U
T
E
T
VV
O
L
T
V C
H
Result: If your television is compatible with the remote
control, it will switch off.
(AK68-01357A)
M
E
N
U
R
E
T
U
R
N
E
N
T
E
R
POPU
P
E M
M
E
E
N
N
U
DIS
C
M
EN
U
I
N
F
O
E
X
I
T
T
I
T
L
U
A
U
DI
O
S
U
B
T
I
T
L
E
R
E
PE
A
T
R
E
PE
A
T
It is now programmed to operate with the
remote control.
M
A
R
K
E
R
ZOOM
Remote Control
(AK59-00070A)
ꢀꢀ
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
NOTE
Quick Guide
(AK68-01358A)
ꢀꢀ
If you replace the remote control's batteries,
you must set the brand code again.
Preparing the Remote Control
You can then control the television using the following
buttons after pressing the TV button.
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote control.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
Button
Function
• Close the battery cover.
TV POWER
TV INPUT SEL.
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
If the remote does not operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
VOL (+
CH (
-)
)
TV MUTE
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
ꢀꢀ
The functions listed above will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
NOTE
14 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllable TV Codes
Brand
Code
SAMSUNG
AIWA
TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09
TV POWER+82
ANAM
TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18
TV POWER+57
BANG & OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
TV POWER+71
TV POWER+73
TV POWER+57
TV POWER+52
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
TV POWER+75
TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34
TV POWER+64
TV POWER+73
TV POWER+06, +49, +57
TV POWER+57
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
TV POWER+84
TV POWER+70
TV POWER+49, +52, +71
TV POWER+60, +72, +73, +75
TV POWER+52
IMPERIAL
JVC
TV POWER+61, +79
LG
TV POWER+06, +19, +20, +21, +22, +78
TV POWER+06, +69
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
TV POWER+06, +57
TV POWER+40
TV POWER+57
MITSUBISHI
MIVAR
TV POWER+06, +48, +62, +65
TV POWER+52, +77
NEC
TV POWER+83
NEWSAN
NOBLEX
TV POWER+68
TV POWER+66
NOKIA
TV POWER+74
NORDMENDE
PANASONIC
PHILIPS
TV POWER+72, +73, +75
TV POWER+53, +54, +74, +75
TV POWER+06, +55, +56, +57
TV POWER+06, +56, +57
TV POWER+58, +59, +73, +74
TV POWER+06, +56
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
TV POWER+57
TV POWER+45, +46
REX
TV POWER+74
SABA
TV POWER+57, +72, +73, +74, +75
TV POWER+74
SALORA
SANYO
TV POWER+41, +42, +43, +44, +48
TV POWER+06
SCHNEIDER
SELECO
TV POWER+74
SHARP
TV POWER+36, +37, +38, +39, +48
TV POWER+71
SIEMENS
SINGER
TV POWER+57
SINUDYNE
SONY
TV POWER+57
TV POWER+35, +48
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
TV POWER+73
TV POWER+67, +73, +75, +76
TV POWER+72, +73, +75
TV POWER+80, +81
TV POWER+47, +48, +49, +50, +51, +52
TV POWER+57
YOKO
TV POWER+06
ZENITH
TV POWER+63
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Overview
Connections
A Quick Overview presented in this guide will give you
enough information to start using the Blu-ray disc player.
This section involves various methods of
connecting the Blu-ray disc player to other
external components.
Connecting to a TV with HDMI Jack
†
Connecting to a TV with DVI Jack
†
Connecting to a TV (Component)
†
Connecting to a TV (S-Video)
†
Connecting to a TV(Video)
†
Connecting to an Audio System
(2 Channel Amplifier)
†
Connecting to an Audio System
(5.1 Channel Amplifier)
†
Connecting to an Audio System
(Dolby Digital, MPEG2 or DTS Amplifier)
†
Connecting to an Audio System
(HDMI supported Amplifier)
Before Connecting the Blu-ray disc player
ꢀ
Always turn off the Blu-ray disc player, TV and
other components before you connect or
disconnect any cables.
ꢀ
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . .16
Output Selection Feature . . . . . . . . . . . . . . . . . . .17
Choosing a Connection . . . . . . . . . . . . . . . . . . . .17
Refer to the user’s manual of additional
components (such as a TV) you are connecting
for more information on those particular
components.
16 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Output Selection
Feature
Choosing a Connection
The following shows examples of connections commonly used to
connect the Blu-ray disc player with a TV and other components.
You may choose from HDMI, COMPONENT, S-VIDEO or
VIDEO, mode for video output from the player to your TV.
Connecting to a TV with HDMI Cable
1. Using the HDMI-HDMI cable (not included) connect
the HDMI OUT terminal on the rear of the Blu-ray
disc player to the HDMI IN terminal of your TV.
2. Press the OUTPUT SELECT button on the front
panel of the unit until the HDMI indicator lights. Make
sure the unit is in Stop mode.
3. Press the input selector on your TV remote control
until the HDMI signal from the Blu-ray disc player
appears on your TV screen.
• If you have set the remote control to properly operate
with your TV (pages 14~15), press the TV INPUT SEL.
button on the remote control and select HDMI as the
external source of the TV.
Use the OUTPUT SELECT button on the front panel of the
unit to select the video output while the disc is stopped.
- Video Output mode changes as follows when the
OUTPUT SELECT button is pressed: HDMI ꢀ VIDEO ꢀ
COMP ꢀꢀHDMI order.
- To select HDMI output, press the OUTPUT SELECT
button until the HDMI indicator lights.
LAN
- To select COMPONENT output, press the OUTPUT
SELECT button until the COMP indicator lights.
- To select VIDEO or S-VIDEO output, press the OUTPUT
SELECT button until the VIDEO indicator lights.
ꢀꢀ
If HDMI mode is selected for TVs providing
display information (EDID), the TV resolution
HDMI cable
(not included)
NOTE
will be automatically changed to the best
quality supported by the TV.
ꢀꢀ
If HDMI mode is selected for TVs that do not
provide display information (EDID),
resolution will be adjusted to 480p.
ꢀꢀ
If COMP (Component) mode is selected,
resolution will be adjusted to 480p initially.
ꢀꢀ
If VIDEO mode is selected, resolution will be
adjusted to 480i.
HDMI Auto Detection Function
ꢀꢀ
Select the resolution from <Setup> ꢀ
Connecting the HDMI cable while the Blu-Ray player's
power is on, will automatically change the player's video
output mode to HDMI mode.
<Display Setup>. (See page 41~42.)
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
• What is Anynet+?
ꢀꢀ
Depending on your TV, certain HDMI output
resolutions may not work.
Anynet+ is a convenient function that offers linked
operation of this unit through Samsung TVs with
the Anynet+ feature.
NOTE
ꢀꢀ
ꢀꢀ
Please refer to the user's manual of your TV.
If an HDMI or HDMI-DVI cable is plugged into TV,
the Blu-ray disc player’s output is set to HDMI/DVI
automatically within 10 seconds.
- If your Samsung TV has an
supports Anynet+ function.
logo, then it
ꢀꢀ
ꢀꢀ
If Component and HDMI are both connected,
HDMI mode is automatically selected.
- If you turn on the player and insert a disc, the
player will start playing the disc, and the TV will
turn on automatically and switch to HDMI mode.
(
If HDMI is connected in Component mode or
video mode, the video output mode automatically
switches to HDMI mode.)
If you connect a Samsung TV to the Blu-ray
disc player using an HDMI cable, the player
can be easily operated using the TV remote
control. (This is only available with Samsung
TVs that support the Anynet+ feature.)(See
pages 43~44)
- If you turn on the player and press the Play
button with a disc already inserted,the TV will
immediately turn on and switch to HDMI mode.
Connecting to a TV with DVI Cable
• HDMI (High Definition Multimedia Interface)
1. Using the HDMI-DVI cable (not included), connect the
HDMI OUT terminal on the rear of the Blu-ray disc
player to the DVI IN terminal of your TV.
HDMI is an interface that enables the digital
transmission of video and audio data with just a
single connector.
Using HDMI, the Blu-ray disc player transmits a
digital video and audio signal and displays a vivid
picture on a TV having an HDMI input jack.
2. Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the Blu-ray disc
player to the AUDIO (red and white) IN terminals of
your TV.
Turn on the Blu-ray disc player and TV.
• HDMI connection description
3. Press the OUTPUT SELECT button on the front
panel of the unit until the HDMI indicator lights. Make
sure the unit is in Stop mode.
HDMI connector - Supports video and digital audio
data (LPCM or Bitstream).
- HDMI outputs only a pure digital signal to the TV.
4. Press the input selector on your TV remote control
until the DVI signal from the Blu-ray disc player
appears on your TV screen.
• If you have set the remote control to properly operate
with your TV (pages 14~15), press the TV INPUT SEL.
button on the remote control and select HDMI as the
external source of the TV.
- If your TV does not support HDCP (High-
bandwidth Digital Content Protection), random
noise appears on the screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal.
However, when playing a BD/DVD, the data
transmitted to a TV is digital. Therefore either a
digital-to-analog converter (in the Blu-ray disc
player) or an analog-to-digital converter (in the TV)
is required. During this conversion, the picture
quality is degraded due to noise and signal loss.
HDMI technology is superior because it requires
no D/A conversion and is a pure digital signal from
the player to your TV.
LAN
WHITE
LAN
• What is the HDCP?
RED
HDCP (High-band width Digital Content Protection)
is a system for protecting BD/DVD content
HDMI-DVI cable
(not included)
outputted via HDMI from being copied. It provides
a secure digital link between a video source (PC,
DVD. etc) and a display device (TV, projector . etc).
Content is encrypted at the source device to
prevent unauthorized copies from being made.
Audio Cable
WHITE
RED
18 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV (Component)
Connecting to a TV (S-Video)
- Connecting to your TV using Component video cables.
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality and accurate color
- You will enjoy high quality images. S-Video separates
the picture element into black and white(Y) and
color(C) signals to present clearer images than regular
video input mode.
reproduction images. Component video separates the
picture element into black and white(Y), blue(PB),
red(PR) signals to present clear and clean images.
(Audio signals are delivered through the audio output.)
(Audio signals are delivered through the audio output.)
1. Using component video cables (not included),
connect the COMPONENT VIDEO OUT terminals on
the rear of the Blu-ray disc player to the
1. Using an S-Video cable (not included), connect the
S-VIDEO OUT terminal on the rear of the Blu-ray disc
player to the S-VIDEO IN terminal of your TV.
COMPONENT IN terminals of your TV.
2. Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the Blu-ray disc
player to the AUDIO (red and white) IN terminals of
your TV. Turn on the Blu-ray disc player and TV.
2. Using the audio cables (not included), connect the
AUDIO (red and white) OUT terminals on the rear of
the Blu-ray disc player to the AUDIO (red and white)
IN terminals of your TV. Turn on the Blu-ray disc
player and TV.
3. Press the OUTPUT SELECT button on the front
panel of the unit until the VIDEO indicator lights.
Make sure the unit is in Stop mode.
3. Press the OUTPUT SELECT button on the front
panel of the unit until the COMP indicator lights.
Make sure the unit is in Stop mode.
4. Press the input selector on your TV remote control
until the S-Video signal from the Blu-ray disc player
appears on your TV screen.
• If you have set the remote control to properly operate
with your TV (pages 14~15), press the TV INPUT SEL.
button on the remote control and select S-VIDEO as
the external source of the TV.
4. Press the input selector on your TV remote control
until the Component signal from the Blu-ray disc
player appears on the TV screen.
• If you have set the remote control to properly operate
with your TV (pages 14~15), press the TV INPUT SEL.
button on the remote control and select COMPONENT
as the external source of the TV.
LAN
LAN
WHITE
RED
GREEN
WHITE
RED
BLUE
RED
Audio Cable
WHITE
S-Video Cable
(not included)
RED
Component cable
(not included)
Audio Cable
WHITE
RED
RED
GREEN
BLUE
ꢀꢀ
Depending on the manufacturer, the
component terminals on your TV may be
marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of
“PR, PB, Y”. The number and position of
terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
NOTE
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Audio System
(2 Channel Amplifier)
Connecting to a TV(Video)
1. Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the rear
of the Blu-ray disc player to the VIDEO (yellow) /AUDIO
(red and white) IN terminals of your TV.
1. Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the Blu-ray disc
player to the AUDIO (red and white) IN terminals of
your Amplifier.
2. Turn on the Blu-ray disc player and TV.
3. Press the OUTPUT SELECT button on the front panel
of the unit until the VIDEO indicator lights. Make sure
the unit is in Stop mode.
2. Using the video signal cable(s), connect the HDMI OUT,
COMPONENT, S-VIDEO, or VIDEO terminals on the
rear of the Blu-ray disc player to the HDMI IN,
COMPONENT, S-VIDEO, or VIDEO terminal of your
TV as described on pages 17 to 20.
4. Press the input selector on your TV remote control
until the Video signal from the Blu-ray disc player
appears on the TV screen.
• If you have set the remote control to properly operate
with your TV (pages 14~15), press the TV INPUT SEL.
button on the remote control and select VIDEO as the
external source of the TV.
3.Turn on the Blu-ray disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select
the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
LAN
WHITE
RED
Audio Cable
RED
WHITE
2-Channel stereo amp
ꢀꢀ
Noise may be generated if the audio cable
placed too close to the power cable.
NOTE
ꢀꢀ
If you want to connect to an Amplifier,
please refer to the Amplifier connection
page. (See pages 20~22)
ꢀꢀ
ꢀꢀ
ꢀꢀ
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
The number and position of terminals may
vary depending on your TV set. Please refer
to the user's manual of your TV.
If there is one audio input terminal on the TV,
connect it to the [AUDIO OUT][left] (white)
terminal of the Blu-ray disc player.
If you set the OUTPUT SELECT to HDMI,
the Video/S-Video and Component Out
terminals will not output any signal.
“DTS” and “DTS Digital Surround” are
registered trademarks of DTS, Inc.
20 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Audio System
(5.1 Channel Amplifier)
Connecting to an Audio System
(Dolby Digital, MPEG2 or DTS
Amplifier)
1. Using the audio cables, connect the 5.1 ANALOG
AUDIO OUT (Front R, Front L, CENTER,
SUBWOOFER, REAR L, REAR R) terminals on the
rear of the Blu-ray disc player to the 5.1 Channel
ANALOG AUDIO IN (Front R, Front L, CENTER,
SUBWOOFER, REAR L, REAR R) terminals of your
Amplifier.
1. If using an optical cable (not included), connect the
DIGITAL AUDIO OUT (OPTICAL) terminal on the rear
of the Blu-ray disc player to the DIGITAL AUDIO IN
(OPTICAL) terminal of your Amplifier.
If using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL) terminal on the rear
of the Blu-ray disc player to the DIGITAL AUDIO IN
(COAXIAL) terminal of the Amplifier.
2. Using the video signal cable(s), connect the HDMI OUT,
COMPONENT, S-VIDEO, or VIDEO terminals on the
rear of the Blu-ray disc player to the HDMI IN,
COMPONENT, S-VIDEO, or VIDEO terminal of your TV
as described on pages 17 to 20.
2. Using the video signal cable(s), connect the HDMI
OUT, COMPONENT, S-VIDEO, or VIDEO terminals on
the rear of the Blu-ray disc player to the HDMI IN,
COMPONENT, S-VIDEO, or VIDEO terminals of your
TV as described on pages 17 to 20.
3.Turn on the Blu-ray disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select
external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
3. Turn on the Blu-ray disc player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select
the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
LAN
or
5.1 Channel Amplifier
ꢀꢀ
Please turn the volume down when you turn
on the Amplifier. Sudden loud sound may
NOTE
cause damage to the speakers and your ears.
ꢀꢀ
Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
may cause damage to the speakers and
your ears.
ꢀꢀ
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~39)
NOTE
ꢀꢀ
The position of terminals may vary
depending on the Amplifier. Please refer to
the user's manual of your Amplifier.
ꢀꢀ
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~ 39)
ꢀꢀ
The position of terminals may vary
depending on the Amplifier.
Please refer to the user's manual of your
Amplifier.
ꢀꢀ
When using this connection, Blu-Ray discs
with an LPCM audio soundtrack will only be
heard over the front two channels.
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Audio System
(HDMI supported Amplifier)
1. Using the HDMI-HDMI cable (not included), connect
the HDMI OUT terminal on the rear of the Blu-ray disc
player to the HDMI IN terminal of your Amplifier.
Connecting to Samsung's
FTP/Internet site for Software
Upgrades
1. Using the Direct LAN Cable (UTP cable), connect the
LAN terminal on the rear of the Blu-ray disc player to
the LAN terminal of your modem.
2. Using the HDMI-HDMI cable connect the HDMI OUT
terminal of the Amplifier to the HDMI IN terminal of
your TV.
- Connect to the Internet for future software upgrades.
3. Turn on the Blu-ray disc player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select
external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
LAN
LAN
Modem
INTERNET
ꢀꢀ
See pages 45~48 for the Software Upgrade
procedure.
NOTE
ꢀꢀ
Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
NOTE
may cause damage to the speakers and
your ears.
ꢀꢀ
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~39)
ꢀꢀ
The position of terminals may vary
depending on the Amplifier.
Please refer to the user's manual of your
Amplifier.
22 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Playing
Playback
ꢀꢀ
Turn on your TV and set it to the correct Video
Input (the input the Blu-Ray player is connected
to) on the TV's.
ꢀꢀ If you connected an external Audio System, turn on your
This section introduces basic functions of
playback and playback by disc type.
Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the
POWER button, this screen comes up:
If you want to select a language, press a NUMBER
button. (This screen will only appear when you plug in
the player for the first time.) If the language for the
startup screen is not set, the settings may change
whenever you turn the power on or off. Therefore, make
sure that you select the language you want to use. Once
you select a menu language, you can change it by
pressing the
button on the front panel of the unit for
more than 5 seconds with no disc in the unit. Then the
MENU LANGUAGE SELECTION window appears again
where you can reset your preferred language.
ꢀꢀ
Discs which cannot be played and/or are
not intended to be played with this player.
NOTE
• BD-RE 1.0
• DVD+R
• CD-ROM
• CD-I
• HD DVD
• DVD-ROM • CDV
• CVD
• DVD+RW
Before Playing ..................................................................23
Playing a Disc...................................................................24
Using the Search & Skip Functions................................24
Slow Motion Play/Step Motion Play ................................25
Using the Display Function..............................................25
Using the Disc Menu & Popup/Title Menu......................26
Repeat Play ......................................................................27
Selecting the Audio Language ........................................27
Selecting the Subtitle Language .....................................28
Changing the Camera Angle...........................................28
Using the Bookmark Function.........................................29
Playing an Audio CD/ MP3..............................................30
Viewing a Picture..............................................................33
Using a Mixed disc (JPEG+MP3) ...................................35
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
ꢀꢀ Ability to play back may depend on recording conditions.
• DVD-R
• CD-RW/R
• DVD-RW (V mode)
• The unit may not play certain CD-R,
CD-RW and DVD-R due to the disc type or
recording conditions.
ꢀꢀ Blu-ray Disc is a new and evolving format.
Accordingly, disc compatibility issues with new and
existing format discs are possible. Not all discs are
compatible and not every disc will playback.
For additional information, refer to the Disc
Type and Characteristics and Compliance and
Compatibility Notice sections of this Manual. If you
encounter compatibility problems, please contact
SAMSUNG customer care center.
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc
Using the Search and
Skip Functions
During play, you can search quickly through a
chapter or track, and use the skip function to
jump to the next selection.
Playback
Press the OPEN/CLOSE ( ) button.
The STANDBY indicator light goes out and the
tray opens.
1
Searching through a Chapter or Track
Place a disc gently into the tray with
2
the disc’s label facing up.
During playback, press the SEARCH (
) button.
• If you want to search at a faster speed on the BD/DVD,
press this button.
Press the PLAY/PAUSE ( ) button or
• If you press the SEARCH (
Fast 1 ꢀ Fast 2 ꢀ
Fast 4 ꢀ Fast 5 ꢀ
) button,
Fast 3
3
OPEN/CLOSE ( ) button to close the disc tray.
ꢀ
Fast 6
ꢀꢀ
When you stop disc play, the player
remembers where you stopped, so when
you press PLAY/PAUSE ( ) button again,
it will pick up where you left off.
• If you press the SEARCH (
Fast 1 ꢀ Fast 2 ꢀ
Fast 4 ꢀ Fast 5 ꢀ
) button,
NOTE
Fast 3
Fast 6
ꢀ
ꢀꢀ
Press the STOP ( ) button twice during
playback to disable the Resume function.
ꢀꢀ
To pause the playback, press the
ꢀꢀ
PLAY/PAUSE (
)
No sound is heard during search mode.
button during playback.
NOTE
To resume, press the PLAY/PAUSE(
) button
once again.
ꢀꢀ
If the player is left in the stop mode for
more than 10 minutes without any user
interface, a screen saver will appear on
your TV. If the player is left in the screen
saver mode for more than 30 minutes, the
power will automatically turn off except
during playback of an MP3 and/or JPEG.
(Automatic Power-Off Function)
Skipping Tracks
ꢀꢀ
ꢀꢀ
MP3/CDDA : if no button is pressed for
more than 10 minutes, the screen saver
appears and the player automatically
turns off in 30 minutes
During playback, press the SKIP (
) button.
When playing a BD/DVD, if you press the SKIP ( ) button,
it moves to the next chapter. If you press the SKIP (
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of
the previous chapter.
)
JPEG : the screen saver program or the
auto power off function will be deactivated
when playing a photo file.
24 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Display
Function
Slow Motion Play/
Step Motion Play
Slow Motion Play
During playback, press the INFO button on the
1
remote control.
In pause or step mode, press the SLOW button on the
remote control for Slow Motion play.
Press the
buttons to select the desired item.
…†
2
• If you press the SLOW button,
Slow 1 ꢀ
Slow 2 ꢀ
Slow 3
BD
Info
Title
: 001/006
: 001/028
• To return to normal speed playback, press the
Chapter
PLAY/PAUSE (
) button.
Playing Time : 00:30:20
Audio
Subtitle
Angle
:
ENG Multi CH
: Off
: 01/01
CHANGE
SELECT
ꢀꢀ
This (
) icon indicates an invalid button
press.
NOTE
ꢀꢀ
No sound is heard during slow mode.
ꢀꢀ
Slow motion operates only in the forward
direction.
BD-RE
Info
: 001/006
: 001/028
Title
Chapter
Playing Time : 00:30:20
CHANGE
SELECT
Step Motion Play
Press the STEP button on the remote control during play
Press the œ √ buttons to make the desired setup
and then press the ENTER button.
• You may use the number buttons of the remote
control to directly access a title, chapter or to start
the playback from a desired time.
for Step Motion play.
3
• Each time the button is pressed a new frame will appear.
• When the STEP button is pressed, the next frame
will be activated.
• Press the PLAY/PAUSE (
) button to resume
normal play.
To make the screen disappear, press the INFO
4
button again.
ꢀꢀ
No sound is heard during step mode.
NOTE
ꢀꢀ
Step motion operates only in the forward
direction.
ꢀꢀ
If you are playing contents from the Info
menu, in some cases, playback may
malfunction depending on the title.
Caution
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Title Menu
• Title : To access the desired title when there is
more than one in the disc. For example, if there
is more than one movie on a BD/DVD, each
movie will be identified as a Title.
NOTE
During playback, press the TITLE MENU button
on the remote control.
• Chapter: Most BD/DVD discs are recorded in
chapters so that you can quickly find a specific
passage.
1
2
• Audio : Refers to the film's soundtrack
language. A BD disc can contain up to 32 audio
languages and a DVD up to 8.
Press the …†œ √ buttons to make the desired
setup, then press the ENTER button.
•
The Title menu setup options may vary from disc to disc.
• Time : Allows playback of the film from a
desired time. You must enter the starting time
as a reference. The time search function does
not operate on some discs.
ꢀꢀ
Depending on the disc, the Title Menu may
not be available.
NOTE
• Subtitle : Refers to the subtitle languages
available in the disc. You will be able to choose
the subtitle languages or, if you prefer, turn
them off from the screen. A BD disc can
contain up to 255 subtitle languages, and a DVD
up to 32.
ꢀꢀ
Title Menu will only be displayed if there are
at least two titles in the disc.
Using the Popup Menu
• Angle : When a BD/DVD contains multiple
angles of a particular scene, you can use the
ANGLE function.
During playback, press the POPUP MENU button on
1
2
the remote control.
Press the …†œ √ buttons or ENTER button to select
the desired menu.
• The Popup menu setup options may vary from
disc to disc.
Using the Disc Menu &
Popup/Title Menu
MAIN MENU
AUDIO SET UP
SUBTITLES
SCENE SELECTIONS
Using the Disc Menu
During playback, press the DISC MENU button
1
2
on the remote control.
3
4
5
6
7
8
9
10 11 12 13 14 15
Press the …†œ √ buttons to make the desired
setup, then press the
√
or ENTER button.
ꢀꢀ
Depending on the disc, the Popup Menu
may not be available.
•
The Disc menu setup items may vary from disc to disc.
NOTE
PLAY MOVIE
LANGUAGES
SCENE SELECTIONS
PREVIEWS
3
4
5
6
7
8
9
10 11 12 13 14 15
ꢀꢀ
Depending on the disc, the Disc Menu may
not be available.
NOTE
26 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
Selecting the Audio
Language
You can select a desired audio language quickly
and easily with the AUDIO button.
Repeat the current chapter or title.
Repeat playback
During playback, press the REPEAT button on the
remote control.
Repeat screen appears.
Using the AUDIO button
1
Press the AUDIO button during playback. The Audio
1
2
changes when the button is pressed repeatedly.
• The audio languages are represented by
abbreviations.
Repeat
Title
Audio
ENG Dolby Digital Multi CH
Press the …† buttons to select Chapter or Title.
• BD/DVD repeats play by chapter or title.
2
3
To remove the AUDIO icon, press the CANCEL or
RETURN button.
To return to normal play, press the REPEAT button
again, then press the …† buttons to select Off.
<Using the INFO button>
1. During playback, press the INFO button on the
remote control.
ꢀꢀ
Depending on the disc, the Repeat function
may not be available.
NOTE
2. Press the …† buttons to select Audio.
3. Press the œ √ buttons on the remote control to select
the desired audio.
Using the A-B Repeat function
ꢀꢀ
This function depends on what audio
languages are encoded on the disc and may
NOTE
not be available.
1. Press the Repeat A-B button on the remote control.
ꢀꢀ
A BD disc can contain up to 32 audio
languages and a DVD up to 8.
2. Press the Repeat A-B button at the point
where you want repeat play to start (A).
ꢀꢀ
Depending on the disc type, you can use the
Audio button to change the audio sound
track as well as the audio language.
Some Blu-ray discs may allow you to select
either multi-channel LPCM or Dolby digital
audio sound track in English sound tracks.
3. Press the Repeat A-B button at the point where
you want repeat play to stop (B).
4.To return to normal play, press the CANCEL button.
ꢀꢀ
Point B cannot be set until 5 seconds of
playback has elapsed from point A.
NOTE
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Subtitle
Language
Changing the Camera
Angle
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
When a BD/DVD contains multiple angles of a
particular scene, you can use the
ANGLE function.
Using the SUBTITLE button
Using the ANGLE function
Press the SUBTITLE button. The subtitle changes
During playback, press the INFO button on the
1
2
when the button is pressed repeatedly. The subtitle
languages are represented by abbreviations.
1
2
remote control.
Press the
buttons to select Angle.
…†
Subtitle
ENG
BD
Info
Title
: 001/006
: 001/028
Chapter
Playing Time : 00:30:20
Audio
Subtitle
Angle
:
ENG Multi CH
: KOR
: 01/01
MOVE
CHANGE
To remove the SUBTITLE icon, press the CANCEL
or RETURN button.
Press the œ √ buttons or you can use the number
buttons on the remote control to select the desired
angle.
3
<Using the INFO button>
1. During playback, press the INFO button on the remote
control.
ꢀꢀ
ꢀꢀ
If the disc has only one angle, this feature
won’t work. Currently, very few discs have
this feature.
NOTE
2. Press the …† buttons to select Subtitle.
3. Press the œ √ buttons on the remote control to select
the desired subtitle language.
Depending on the disc, these functions
may not work.
ꢀꢀ
Depending on BD/DVDs, you may have to
change the desired subtitle in the Disc
NOTE
Menu. Press the DISC MENU button.
ꢀꢀ
This function depends on what subtitles are
encoded on the disc and may not be
available on all BD/DVDs.
ꢀꢀ
A BD disc can contain up to 255 subtitle
languages and a DVD up to 32.
28 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ
When the disc tray is opened and then
closed, bookmarks will disappear.
NOTE
Using the Bookmark
Function
Playing back a bookmark
Using the MARKER button
The features lets you bookmarks sections of a
DVD so you can quickly find them
at a later time.
During playback, press the MARKER button
1
on the remote control.
Using the MARKER button
Bookmark 01 02 -- -- -- -- -- -- -- --
MOVE
PLAY
CANCEL
RETURN
During playback, press the MARKER button
1
2
on the remote control.
Bookmark -- -- -- -- -- -- -- -- -- --
MOVE SELECT RETURN
Press the œ √ buttons to select a bookmarked
2
3
scene.
Press the ENTER button when the desired scene appears.
• The number 01 is displayed and the scene is
memorized.
Press the ENTER or PLAY/PAUSE(
start playing from the selected scene.
) button to
Bookmark 01 -- -- -- -- -- -- -- -- --
MOVE
PLAY
CANCEL
RETURN
Clearing a bookmark
Using the MARKER button
Press the
√
buttons to move to the next position.
During playback, press the MARKER button
on the remote control.
3
1
Press the ENTER button again when the desired scene appears.
4
The number 02 is displayed and the scene is memorized.
Bookmark 01 02 03 04 05 06 07 08 -- --
MOVE
PLAY
CANCEL
RETURN
Bookmark 01 02 -- -- -- -- -- -- -- --
MOVE
PLAY
CANCEL
RETURN
• Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an MP3
Press the œ √ buttons to select a bookmarked
2
3
scene.
Bookmark 01 02 03 04 05 06 07 08 -- --
MOVE
PLAY
CANCEL
RETURN
Insert an MP3 disc into the disc tray.
• The Menu screen is displayed.
1
Press the …† buttons to select Music, then
press the ENTER button.
• The Music List is displayed.
2
CD
Music List
1/12
Song 1.mp3
No.
Title
Size
Press the CANCEL button to delete the selected
bookmark.
ROOT
Song 1.mp3
Song 2.mp3
Song 3.mp3
Song 4.mp3
Song 5.mp3
7.2MB
8.2MB
8.5MB
5.1MB
5.6MB
002
003
004
005
00:00:16
MP3 Song 1.mp3
ROOT
Bookmark 01 02 03 04 05 06 07 -- -- --
B
Photo
C
Play Mode
D
Playlist
MOVE
SELECT
RETURN
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select the MP3 file you
3
want to play, and then press the ENTER button.
Audio CD(CD-DA)/MP3 Screen
Elements
<Audio CD(CD-DA)>
CD
Music List
1/12
Playing an Audio CD/
MP3
1
TRACK 001
5
6
No.
Title
TRACK 001
Length
00:04:06
002
003
004
005
006
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
00:04:06
00:05:04
00:03:20
00:05:15
00:04:09
00:00:16
2
3
CDDA TRACK 001
C
D
Play Mode
Playlist
7
Playing an Audio CD(CD-DA)
MOVE
SELECT
RETURN
EXIT
4
<MP3>
8
CD
Music List
1/12
Insert an audio CD (CD-DA) into the disc tray.
• The Music List screen is displayed
Song 1.mp3
1
5
6
No.
Title
Size
1
ROOT
Song 1.mp3
Song 2.mp3
Song 3.mp3
Song 4.mp3
Song 5.mp3
7.2MB
8.2MB
8.5MB
5.1MB
5.6MB
CD
Music List
002
003
004
005
00:00:16
2
3
TRACK 001
1/12
MP3 Song 1.mp3
ROOT
No.
Title
TRACK 001
Length
00:04:06
00:04:06
00:05:04
00:03:20
00:05:15
00:04:09
B
C
D
002
003
004
005
006
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
Photo
Play Mode
Playlist
7
00:00:16
CDDA TRACK 001
4
MOVE
SELECT
RETURN
EXIT
1. Current track (song) : Displays the number of the track
currently being played.
C
Play Mode
D
Playlist
MOVE
SELECT
RETURN
EXIT
2. This shows the operating state of a disc and a playback
time corresponding to a portion that is currently played.
3. Displays the current folder, current file type and file name.
4. Displays available buttons.
5. Displays the current play index, total track number.
6. Displays the track list (song list).
Press the …† buttons to select the track you want
to play, and then press the ENTER button.
2
7. Displays COLOR buttons available to control Music,
Photo and Play modes.
: GREEN(B), YELLOW(C), BLUE(D)
8. Displays the media type. (Ex: CD, DVD)
30 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
1. …† buttons : Selects a track (song).
Buttons on the Remote Control
used for Audio CD(CD-DA)/ MP3
disc playback
2. œ √ buttons: Moves the page up/down.
3. ENTER button : Plays the selected track (song).
4. SKIP ( ) button: Plays the next track.
5. SKIP ( ) button: Returns to the beginning of the
current track when pressed during playback. If pressed
again, your Blu-ray disc player moves to and plays the
previous track.
If you press this button within three seconds after
playback starts, the previous track will be played.
If you press this button after three seconds, the current
track will be replayed from the beginning.
TV
POWER
POWER
OPEN/CLOSE
6. Press the SEARCH (
) buttons : Fast Play
(only CD-DA)
7. STOP ( ) button: Stops a track(song).
8. PLAY/PAUSE ( ) button: Plays the currently selected
track. If pressed during playback, the current track is
paused.
CANCEL
TV INPUT SEL.
SLOW
STOP
STEP
4
9. COLOR button: The RED(A) GREEN(B), YELLOW(C)
and BLUE(D) buttons
5
PLAY
• RED(A) button : Returns to the Music List.
• GREEN(B) button : Selects the Photo Mode.
• YELLOW(C) : Selects the Play Mode(Repeat).
• BLUE(D) button : Go to Playlist.
6
7
6
8
TV MUTE
TVVOL
TV CH
MENU
RETURN
Repeat CD (CD-DA) & MP3
2
3
ENTER
1
Using the REPEAT button
POPUP MENU
EXIT TITLE MENU
DISC MENU INFO
During playback, press the REPEAT or YELLOW(C) button
repeatedly to select the repeat mode you want.
9
When playing an Audio CD(CD-DA) :
Normal ꢀꢀ ꢀꢀ ꢀꢀ
AUDIO SUBTITLE REPEA
T
REPEAT
ZOOM
MARKER
When playing an MP3 disc :
Normal ꢀꢀ ꢀꢀ ꢀꢀ
• Normal (CD (CD-DA)/MP3): Tracks on a disc are played
in the order in which they were recorded on the disc.
•
•
•
Repeat Track (CD (CD-DA)/MP3)
Repeat Folder (MP3)
Random (CD (CD-DA)/MP3)
- When playing an Audio CD(CD-DA): The random
option plays a disc’s track in random order.
- When playing an MP3 disc : The random option
plays a folder’s file in random order.
Repeat All (CD-DA)
•
- To return to normal playback -
Press the REPEAT or YELLOW(C) button repeatedly
to return to normal playback.
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playlist
Press the √…† buttons to select the desired
Track(song) you want to hear, then press the ENTER
button.
When the track is finished, the next track will
automatically play.
4
5
You can create a playlist with up to 30 tracks.
Press the BLUE(D) button during the Music List playback.
1
CD
No.
Playlist
00:26
TRACK 008
Title
CD
No.
Playlist
00:00
No.
Playlist
007 TRACK 007
008 TRACK 008
009 TRACK 009
010 TRACK 010
011 TRACK 011
…
001 TRACK 002
002 TRACK 004
003 TRACK 006
TRACK 008
…
Title
No.
Playlist
001 TRACK 001
002 TRACK 002
003 TRACK 003
004 TRACK 004
005 TRACK 005
006 TRACK 006
…
…
012 TRACK 012
†
†
A
Music
†
†
A
Music
MOVE
PLAY
DELETE
EXIT
MOVE
ADD
RETURN
EXIT
To go back to the Music List, press the RED(A)
button.
Press the …† buttons to select a track, then press
the ENTER button to add it to the Playlist. Repeat
this procedure to add additional tracks.
2
3
CD
No.
Playlist
00:00
Title
No.
Playlist
007 TRACK 007
008 TRACK 008
009 TRACK 009
010 TRACK 010
011 TRACK 011
…
001 TRACK 002
002 TRACK 004
003 TRACK 006
004 TRACK 008
005 TRACK 011
…
012 TRACK 012
†
†
A
Music
MOVE
ADD
RETURN
EXIT
If there is an undesired track in the playlist, press the
√…† button to select that track, and then press the
CANCEL button.
• The selected track will be deleted.
CD
No.
Playlist
00:00
Title
No.
Playlist
007 TRACK 007
008 TRACK 008
009 TRACK 009
010 TRACK 010
011 TRACK 011
012 TRACK 012
…
001 TRACK 002
002 TRACK 004
003 TRACK 006
004 TRACK 008
…
†
†
A
Music
MOVE
PLAY
DELETE
EXIT
32 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide Show
Viewing a Picture
Using the YELLOW(C) button
To setup follow steps 1 and 2 in the left column.
Press the YELLOW(C) button.
3
Viewing a Picture
CD
Photo List
ROOT
ROOT
Slide Show Speed
Insert a JPEG disc into the disc tray.
Fast
Image 11.jpg
1
• The Menu screen is displayed.
Normal
Slow
Image 13.jpg
Image 14.jpg Image 15.jpg
Image 16.jpg
†
B
C
Music
Slide Show
RETURN
Press the …† buttons to select Photo, then press
the ENTER button.
• The Photo List is displayed.
MOVE
SELECT
EXIT
2
Press the …† buttons to select the slideshow speed
CD
Photo List
4
(Fast, Normal, Slow), then press the ENTER button.
ROOT
ROOT
•
The Slide Show starts and plays at the selected speed.
Image 1.jpg
Image 10.jpg
Image 11.jpg
Image 16.jpg
EXIT
- To stop the Slide Show -
Image 13.jpg
Image 14.jpg Image 15.jpg
†
B
Music
C
Slide Show
RETURN
Press the STOP or RETURN button.
MOVE
SELECT
<Using the INFO button>
Press the …†œ √ buttons to select a picture.
• To see the next 8 pictures, press the SKIP (
button.
Press the ENTER button to select the picture you
want to see, then press the INFO button.
3
)
1
2
• To see the previous 8 pictures, press the
SKIP( ) button.
Press the …† buttons to select Slide Show.
ꢀꢀ
Photo files larger than 6Mb or with more than
10 million pixels may not be played.
CD
Info
NOTE
Rotate
: Off
: Off
: Off
Zoom
Slide Show
CHANGE
SELECT
Press the œ √ buttons to select the Slide Show
speed, then press the ENTER button.
• The Slide Show starts and plays at the selected
speed.
3
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
- To stop the Slide Show -
- To stop the Rotate -
Press the INFO button.
Press the INFO button.
1
1
Press the …† buttons to select Slide Show
.
Press the …† buttons to select Rotate.
2
2
Press the œ √ buttons to select the Off, then press
the ENTER button.
Press the œ √ buttons to select Off, then press the
ENTER button.
3
3
Zoom
ꢀꢀ
You can also play the Slide Show with PLAY
button in the Photolist.
JPEG's smaller than 1920 x 1080 will be
NOTE
To setup, follow steps 1 to 2 in "Viewing a Picture" on page 33.
ꢀꢀ
displayed at normal resolution. They will not
fully fill the screen.
-1 Press the ENTER button to select the picture you
3
want to see, then press the INFO button.
Press the …† buttons to select Zoom,
then press the œ √ buttons to select On.
Rotate
4
To setup, follow steps 1 to 2 in "Viewing a Picture" on page 33.
CD
Info
Rotate
: Off
: On
: Off
Zoom
-1 Press the ENTER button to select the picture you
Slide Show
CHANGE
SELECT
3
want to see, then press the INFO button.
Press the …† buttons to select Rotate.
4
CD
Info
When the magnifier appears, use the …†œ √
buttons to set a section to enlarge.
Rotate
: Off
: Off
: Off
5
6
Zoom
Slide Show
CHANGE
SELECT
Press the œ √ buttons to select the rotate angle,
then press the ENTER button.
5
Each time the ENTER button is pressed, the picture
is enlarged up to 4x(four times the normal size).
Zoom X2 ꢀꢀZoom X4 ꢀꢀZoom X2 ꢀꢀNormal
34 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
- To stop the Zoom -
Using a Mixed disc
(JPEG+MP3)
Press the INFO button.
1
Press the …† buttons to select Zoom,
then press the œ √ buttons to select Off.
2
Example: Playing MP3 music
Move Photo/Go To Photo List
Insert a Mixed disc(JPEG+MP3) into the disc tray.
• The Menu screen is displayed.
1
2
To setup, follow steps 1 to 2 in "Viewing a Picture" on page 33.
Press the …† buttons to select Music, then press
the ENTER button.
• The Music List is displayed.
-1 Press the ENTER button to select the picture you
3
want to see.
CD
Music List
1/12
Song 1.mp3
Image 10.jpg
PHOTO PLAY
006/016
RETURN
No.
Title
Size
INFO
ROOT
Song 1.mp3
Song 2.mp3
Song 3.mp3
Song 4.mp3
Song 5.mp3
7.2MB
8.2MB
8.5MB
5.1MB
5.6MB
002
003
004
005
00:00:16
MP3 Song 1.mp3
ROOT
Photo
Play Mode
Playlist
B
C
D
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select the MP3 file you want
to play, and then press the ENTER button.
Press the …† buttons to move the previous or next
picture.
3
4
5
To go Photo List, press the RETURN or STOP
button.
- To go to the Photo List -
Press the GREEN(B) button.
CD
Photo List
2/16
• You can go to the Photo List screen.
Image 10.jpg
ROOT
CD
Photo List
Image 1.jpg
Image 10.jpg
Image 11.jpg
Image 16.jpg
ROOT
ROOT
Image 13.jpg
Image 14.jpg Image 15.jpg
†
Image 1.jpg
Image 10.jpg
Image 11.jpg
Image 16.jpg
B
C
Slide Show
Music
MOVE
SELECT
RETURN
EXIT
Image 13.jpg
Image 14.jpg Image 15.jpg
†
B
C
Slide Show
Music
MOVE
SELECT
RETURN
EXIT
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: Viewing JPEG pictures
Insert a Mixed disc(JPEG+MP3) into the disc tray.
1
2
• The Menu screen is displayed.
Press the …† buttons to select Photo, then press
the ENTER button.
• The Photo List is displayed.
CD
Photo List
ROOT
ROOT
Image 1.jpg
Image 10.jpg
Image 11.jpg
Image 16.jpg
Image 13.jpg
Image 14.jpg Image 15.jpg
†
B
C
Slide Show
Music
MOVE
SELECT
RETURN
EXIT
Press the …†œ √ buttons to select a picture.
3
- To go to the Music List -
Press the GREEN(B) button.
• You can go to the Music List screen.
CD
Music List
1/12
Song 1.mp3
No.
Title
Size
ROOT
Song 1.mp3
Song 2.mp3
Song 3.mp3
Song 4.mp3
Song 5.mp3
7.2MB
8.2MB
8.5MB
5.1MB
5.6MB
002
003
004
005
00:00:16
MP3 Song 1.mp3
ROOT
B
Photo
C
Play Mode
D
Playlist
MOVE
SELECT
RETURN
EXIT
36 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menu
Navigation
System Setup
The on-screen menus allow you to enable or disable
various functions on your Blu-ray disc player.
Use the following buttons to open and navigate
through the on-screen menus.
BD Player
BD
Title
Title
Press ENTER or Right button for Title List.
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
EXIT Button
Press this button to exit the on screen menu.
1
2
…†œ √ Buttons
Press these buttons on the remote control to move
the selection bar …†œ √ to cycle through the
menu options.
ENTER Button
Press this button on the remote control to confirm any
new settings.
3
4
RETURN Button
Press this button on the remote control to return to
the Previous menu screen displayed or to exit the
on-screen menu.
On-Screen Menu Navigation . . . . . . . . . . . . . . . .37
Setting up the Language Options . . . . . . . . . . . .38
Setting up the Audio Options . . . . . . . . . . . . . . .38
Setting up the Speaker Options . . . . . . . . . . . . .40
Setting up the Video display/output Options . . . .41
Setting up the HDMI setup options . . . . . . . . . . .43
Setting up the System Upgrade . . . . . . . . . . . . .45
Setting up the Parental Lock . . . . . . . . . . . . . . . .48
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Language
Options
Press the …† buttons to select the desired
language, then press the ENTER button.
5
If you set the audio, subtitle, disc menu and player menu,
in advance, they will come up automatically every time you
watch a movie.
ꢀꢀ
ꢀꢀ
Press the RETURN or œ button to return to
the previous menu. Press the MENU button
to exit the menu.
NOTE
The selected language will only appear if it
is supported on the disc.
With the unit in Stop mode, press the MENU
1
2
button.
Press the …† buttons to select Setup,
then press the ENTER or √ button.
Setting up the Audio
Options
BD Player
BD
Setup
Language Setup
Language Setup
√
Title
Audio Setup
√
√
√
√
√
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
Allows you to set up the Audio device and sound status
depending on the audio system being used with the player.
MOVE
SELECT
RETURN
EXIT
With the unit in Stop mode, press the MENU
Press the …† buttons to select Language Setup,
then press the ENTER or √ button.
Language setup menu will be displayed.
1
2
button.
3
4
Press the …† buttons to select Setup, then press
the ENTER or √ button.
BD Player
BD
Language Setup
Audio
: Original
: Automatic
: English
: English
√
√
√
√
Title
BD Player
BD
Setup
Subtitle
Music
Photo
Setup
Disc Menu
Player Menu
Language Setup
Audio Setup
√
√
√
√
√
√
Title
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select the desired
language option, press the ENTER or √ button.
Press the …† buttons to select Audio Setup, then
press the ENTER or √ button.
BD Player
BD
Language Setup
3
Original
Audio
Title
English
Subtitle
Français
BD Player
BD
Audio Setup
Music
Disc Menu
Player Menu
Deutsch
Español
Photo
Setup
†
Digital Output
: PCM
√
√
√
√
Title
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
MOVE
SELECT
RETURN
EXIT
• Disc Menu: For the disc menu contained on the disc
• Player Menu: For the on-screen menu of your
Blu-ray disc player.
38 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM Down Sampling
Press the …† buttons to select the desired audio
option from the options described below, then press
the ENTER or √ button.
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible. 96KHz signals
will be down converted to 48KHz
4
5
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. Signals will be
output without any changes.
Press the …† buttons to select the desired item,
then press the ENTER button.
BD Player
BD
Audio Setup
Digital Output
: PCM
√
√
√
√
Title
ꢀꢀ
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
Music
Photo
Setup
NOTE
MOVE
SELECT
RETURN
EXIT
Digital Output
• PCM : Select this when your equipment does not
ꢀꢀꢀꢀꢀEven when PCM Down Sampling is set to Off,
decode Dolby Digital.
some discs will only output downsampled
audio through the digital outputs.
NOTE
•
Bitstream
:
Outputs Dolby Digital or MPEG-2 or DTS
audio as Bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
ꢀꢀꢀꢀꢀ
During disc playback, press the Stop button
twice (resuming playback is disabled) before
setting PCM Down Sampling. If you press the
Stop button once (resuming playback is still
enabled), you can’t set PCM Down Sampling
as it is deactivated.
BD Player
BD
Audio Setup
Digital Output
: PCM
√
√
√
√
Title
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
Music
Photo
Setup
HDMI
• If your TV is not compatible with compressed multi-
channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
MOVE
SELECT
RETURN
EXIT
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
ꢀꢀ
ꢀꢀ
If you have selected a LPCM sound track on a
disc, the output will automatically be set to PCM.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
NOTE
Be sure to select the correct Digital Output or
you will hear no sound or a loud noise.
•
•
Off :You can enjoy the movie with the standard
Dynamic Range.
ꢀꢀ When playing a Dolby Digital movie make sure
the Digital Output is set to Bitstream.
On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
BD Player
BD
Audio Setup
Digital Output
: PCM
√
√
√
√
Title
PCM Down Sampling : On
Dynamic Compression : Off
Speaker Setup
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the …†œ √ buttons to select the desired
Speaker, then press the ENTER button.
Setting up the Speaker
Options
5
ꢀꢀ
Press the RETURN or œ button to return to
the previous menu.
Press the MENU button to exit the menu.
If you have connected this player to an Amp/Receiver or
Home theater via the 5.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
NOTE
With the unit in Stop mode, press the MENU
1
2
button.
Speaker Setup
Front (L,R)
Large, Small
Press the …† buttons to select Setup, then press
Center (C)
Large, Small, None
Large, Small, None
LFE, None
the ENTER or √ button.
Surround (LS,RS)
Subwoofer (SW)
BD Player
BD
Setup
Language Setup
Audio Setup
√
√
√
√
√
√
Title
Speaker
Display Setup
HDMI Setup
Music
•
Large : Delivers full bandwidth sound with bass below 100 Hz.
Photo
Setup
System Upgrade
Parental Setup
• Small : If LFE is on, bass below 100 Hz will outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
MOVE
SELECT
RETURN
EXIT
•
None : Select to disable the speakers.
Press the …† buttons to select Audio Setup, then
3
4
press the ENTER or √ button.
Subwoofer Speaker
•
•
LFE : Select to use the subwoofer speaker.
BD Player
BD
Audio Setup
None : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R)
speakers are set to Large.)
Digital Output
: PCM
√
√
√
√
Title
PCM Down Sampling : On
Dynamic Compression : On
Speaker Setup
Music
Photo
Setup
Press the RED(A) button
MOVE
SELECT
RETURN
EXIT
• A test tone will be sent to L ꢀꢀC ꢀꢀR ꢀꢀꢀRS ꢀꢀLS ꢀ
LFE in order so you can make sure the speakers are set
up correctly.
Press the …† buttons to select Speaker Setup,
then press the ENTER or √ button.
•
To end the test tone, press the RED (A) button again.
BD Player
BD
Speaker Setup
L
R
Large
C
Large
Large
LFE
LS
Large
RS
Large
A
Test Tone
MOVE
SELECT
RETURN
EXIT
40 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the …† buttons to select the desired item,
5
then press the ENTER button.
Setting up the Video
display/output Options
ꢀꢀ
Press the RETURN or œ button to return to
the previous menu.
Press the MENU button to exit the menu.
NOTE
This function allows you to setup the TV screen settings.
This function depends on disc type. It may not work for
some disc types.
With the unit in Stop mode, press the MENU
button.
TV Aspect
1
2
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
Press the …† buttons to select Setup, then press
the ENTER or √ button.
BD Player
BD
Display Setup
T
V
A
s
p
e
c
t
Title
4:3 Letter Box
BD Player
BD
Setup
Movie Frame(24Fs)
√
√
4:3 Pan-Scan
16:9 Wide
Resolution
Music
Photo
Setup
Screen Message
Front Display
: On
Language Setup
Audio Setup
√
√
√
√
√
√
Title
: Automatic
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
• 4:3 Letter Box:
Select when you want to see the
total 16:9 ratio screen BD/DVD
supplies, even though you have a
TV with a 4:3 ratio screen. Black
bars will appear at the top and
bottom of the screen.
Press the …† buttons to select Display Setup, then
3
4
press the ENTER or √ button.
Video setup menu will be displayed.
BD Player
BD
Display Setup
TV Aspect
: 16:9 Wide
√
√
√
√
√
Title
• 4:3 Pan-Scan :
Movie Frame(24Fs) : Off
Select this for conventional size
TV when you want to see the
central portion of the 16:9 screen.
(Extreme left and right side of
movie picture will be cut off.)
Resolution
: 480p
Music
Photo
Setup
Screen Message
Front Display
: On
: Automatic
MOVE
SELECT
RETURN
EXIT
• 16:9 Wide :
You can view the full 16:9 picture
on your widescreen TV.
Press the …† buttons to select the desired display
option, then press the ENTER or √ button.
BD Player
BD
Display Setup
T
V
A
s
p
e
c
t
Title
4:3 Letter Box
Movie Frame(24Fs) :
√
√
ꢀꢀ
Depending on the disc type, some aspect
ratios may not be available.
4:3 Pan-Scan
16:9 Wide
:
Resolution
Music
Photo
Setup
NOTE
Screen Message
Front Display
: On
: Automatic
MOVE
SELECT
RETURN
EXIT
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀ
No screen will be displayed if the connected TV
does not support the resolution selected. If the
Movie Frame (24 Fs)
NOTE
Movies are usually filmed at 24 frames per
second. Some Blu-ray discs have the capability
of playing back at this frame rate. Setting the
Movie Frame (24Fs) feature to ON allows you to
adjust the Blu-ray player's HDMI output to 24
frames per second for improved picture quality.
If your TV cannot support this frame rate, this
menu cannot be selected,
screen is blank, press and hold the
button
on the front of the player for more than 5
seconds (no disc inserted). All settings are
restored to the factory default. Follow the steps
on the previous page to access each mode and
select a resolution that your TV will support.
Please refer to page 17 for more information
on video output selection.
ꢀꢀ
This menu can only be selected in 1080i or
1080p HDMI output resolution modes.
Resolution according to the output mode
In HDMI mode
BD Player
BD
Display Setup
TV Aspect
: 16:9 Wide
√
√
√
√
√
Title
Movie Frame(24Fs) : Off
Music
Photo
Setup
Resolution
: 1080i
BD playback : 1080p, 1080i, 720p, 480p resolutions are available.
DVD playback : 1080p, 1080i, 720p and 480p resolutions are available.
However, resolutions not supported by the TV are unavailable.
Screen Message
Front Display
: On
: Automatic
MOVE
SELECT
RETURN
EXIT
In COMPONENT mode
• BD playback
Manufacturers of Blu-ray Discs may restrict access to
certain video outputs and resolutions. These constraints
are referred to as "Tokens". There are three different levels
of permission possible, they are:
Resolution
Sets the output resolution of the Component and HDMI
video signal.
-
Token Disable :1080i, 720p, 480p, 480i resolutions are
available.
- ICT Enable : 480p, 480i resolutions are available.
- DOT Enable :Component and all analog outputs are
disabled in this token. HDMI must be connected to view
a disc with this token.
BD Player
BD
Display Setup
TV Aspect
: 16:9 Wide
√
√
√
√
√
Title
Movie Frame(24Fs) : Off
Resolution
: 1080i
Music
Photo
Setup
• DVD playback
480p, 480i resolutions are available.
Screen Message
Front Display
: On
: Automatic
In VIDEO (S-VIDEO) mode
MOVE
SELECT
RETURN
EXIT
• BD playback
- Token Disable : 480i is available.
- ICT Enable : 480i is available.
- DOT Enable : Component and all analog outputs are
disabled in this token. HDMI must be connected to view
a disc with this token.
• Press the OUTPUT SELECT button on the front
panel of the unit to select the HDMI mode, and then
select from 1080p, 1080i, 720p and 480p.
• Press the OUTPUT SELECT button on the front
panel of the unit to select the COMPONENT mode,
and then select from 1080i, 720p, 480p and 480i.
- DVD playback : 480i is available.
• The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The i and p
indicate interlace and progressive scan, respectively.
HDMI mode
(HDMI output) (Component output)
COMP mode
Video mode(S-Video,
Video output)
Discs
Blu-ray Disc
1080i, 720p, 480p, 480i
480i
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video.
Blu-ray Disc with
ICT(Image
Constraint Token)
1080p/60fps,
480p, 480i
480i
1080p/24fps,
1080i, 720p,
Blu-ray Disc with
DOT(Digital Only
Token)
480p
No picture
No picture
480i
1080p/60fps,
1080i, 720p,
480p
DVD
480p, 480i
42 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Message
Anynet+ (HDMI-CEC)
• On : Displays messages related to operation mode.
• Off : Does not display messages related to operation mode.
When HDMI is set to on, you can operate Anynet+ function.
• On : Anynet+ functions will be work.
• Off : Anynet+ function will not work.
Front Display
BD Player
BD
HDMI Setup
• Automatic : Display is dark during playback and bright
when the unit is in Stop mode.
• Dim : Select to dim the display window.
• Bright : Select to brighten the display window.
Anynet+ (HDMI-CEC) : On
√
√
√
√
Title
Format
: TV
: Off
Sharpness
Music
Photo
Setup
DVD Noise Reduction : Off
MOVE
SELECT
RETURN
EXIT
Setting up the HDMI
setup options
What is Anynet+?
Anynet+ is a convenient function that offers linked
operations with other Samsung products with the
Anynet+ feature.
You can operate this unit using a Samsung TV remote
control or power on the Samsung TV and Home theater
and start disc playback simply by pressing the PLAY button
on the Blu-ray player's remote.
With the unit in Stop mode, press the MENU
button.
1
Press the …† buttons to select Setup, then press
2
the ENTER or √ button.
ꢀꢀ
This function is not available if the HDMI
cable does not support CEC.
NOTE
BD Player
BD
Setup
Language Setup
Audio Setup
√
√
√
√
√
√
Title
Display Setup
HDMI Setup
Music
Photo
Setup
To use Anynet+
System Upgrade
Parental Setup
1. Connect the BD Player to a Samsung
TV with an HDMI cable. (See pages 17~18)
2. Set the Anynet+ (HDMI CEC) to “On” on your
BD Player.
MOVE
SELECT
RETURN
EXIT
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
Press the …† buttons to select HDMI Setup, then
press the ENTER or √ button.
HDMI setup menu will be displayed.
3
Anynet+ Functions
• One touch play
BD Player
BD
HDMI Setup
You can power on your Samsung TV and Home Theater,
and play the disc in this unit simply by pressing the PLAY
button on the Blu-ray's
Anynet+ (HDMI-CEC) : On
√
√
√
√
Title
Format
: TV
: Off
Sharpness
Music
Photo
Setup
• One touch watching
DVD Noise Reduction : Off
Select “Watching BD" or "Connected to BD player"
(depending on your TV's menu) in the Anynet+ menu on
the TV. The Blu-Ray player will automatically turn on and
the TV will be switched to HDMI mode.
• Remote control Link
MOVE
SELECT
RETURN
EXIT
You can operate this player with your Samsung TV remote
control.
Press the …† buttons to select the desired display
4
option, then press the ENTER or √ button.
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
• Available TV buttons : These buttons work same as this
player's remote control.
- Playback control buttons :
You can optimize the HDMI output for connection to a TV
or Monitor.
ENTER
- Menu operation button :
• TV : Select if connected to a TV via HDMI.
• Monitor : Select if connected to a Monitor via HDMI.
- Numeric buttons :
A
B
C
D
- Color buttons :
If the player is connected to a TV, the Monitor option is
unavailable.
TV Anynet+ Menu
BD Player
BD
HDMI Setup
Anynet+ (HDMI-CEC) : On
√
√
√
√
Title
When pressing Anynet+ key of television remote control,
the following On-Screen Display (OSD) will be shown.
Format
: TV
: Off
Sharpness
Music
Photo
Setup
DVD Noise Reduction : Off
BD Player
MOVE
SELECT
RETURN
EXIT
View TV
BD Player Menu
BD Player Operation
Receiver : Off
Setup
Sharpness
MOVE
ENTER
EXIT
To adjust the picture sharpness (Off/Low/Middle/High).
BD Player
BD
HDMI Setup
Anynet+ (HDMI-CEC) : Off
√
√
√
√
Title
• BD Player Menu
Format
: TV
: Off
Sharpness
Music
Photo
Setup
- When playing a movie : brings up the disc’s menu (same
as DISC MENU button on the
DVD Noise Reduction : Off
Blu-ray player’s remote control)
- In Stop mode : brings up the SETUP menu (same as the
MENU button on the Blu-ray player’s
remote control.)
MOVE
SELECT
RETURN
EXIT
ꢀꢀ
ꢀꢀ
This menu can be used only on HDMI output mode.
If Sharpness is set to Off, the original disc
source will be displayed as it is, with no
adjustment made.
• BD Player Operation Menu
Caution
-
When playing a DVD VIDEO, DVD-RAM/-RW/-R, BD-RE
BD-ROM : shows INFO OSD (same as INFO button on the
player's remote control)
DVD Noise Reduction
ꢀꢀ
These menus will vary from Samsung TV to
TV.
This setting can be used to reduce image noise on the
screen (Off/Low/Middle/High).
NOTE
High level gives the highest noise reduction.
BD Player
BD
HDMI Setup
Anynet+ (HDMI-CEC) : Off
√
√
√
√
Title
Format
: TV
: Off
Sharpness
Music
Photo
Setup
DVD Noise Reduction : Off
MOVE
SELECT
RETURN
EXIT
ꢀꢀꢀ
ꢀꢀꢀ
This menu can be used only on HDMI output
mode.
If DVD Noise Reduction is set to Off, the original
disc source will be displayed as it is,
with no adjustment made.
Caution
ꢀꢀꢀ
DVD Noise Reduction is available only in DVD
play mode.
44 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
You will see a window that allows you to check the
cable or network connection status.
Setting up the System
Upgrade
5
BD Player
No Disc
System Upgrade
System Upgrade
√
Samsung may offer upgrades to your Blu-ray player's
firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to 'SUPPORT' page to
download the firmware and burn an update CD.
or
√
√
Now, Checking
Please wait...
MOVE
SELECT
RETURN
EXIT
2. Connect this player's LAN terminal to the LAN terminal on
your modem (see page 22) and follow the steps below.
Firmware Upgrade
ꢀꢀꢀꢀꢀIf the upgrade is possible : You will see information
on the current and new versions of firmware in a
message box.
With the unit in Stop mode/No Disc mode, press the
1
MENU button.
BD Player
No Disc
System Upgrade
System Upgrade
√
The new update data was found.
Press the …† buttons to select Setup,
then press the ENTER or √ button.
√
√
Curret Version
XXXXX
2
New Version
XXXXX
BD Player
No Disc
Setup
Start
Cancel
Language Setup
Audio Setup
√
√
√
√
√
√
Title
MOVE
SELECT
RETURN
EXIT
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
ꢀꢀꢀꢀꢀIf the upgrade is not possible :You will see
the following description in the message box.
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
System Upgrade
Press the …† buttons to select System Upgrade,
then press the ENTER or √ button.
System Upgrade
3
4
√
√
√
Ethernet cable is not connected.
se, check the Ethernet cable
Plea
BD Player
No Disc
System Upgrade
Upgrade Start
√
Title
OK
System Information
Network Setup
√
√
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
• If the cable is not connected :
" Ethernet cable is not connected. Please, check
the Ethernet cable"
• If the network connection has failed :
" This system can not connected to internet for
update. Please, check the network setup"
• If no later version is released (the latest version
has been already installed) :
Press the …† buttons to select Update Start, then
press the ENTER or √ button.
BD Player
No Disc
System Upgrade
Upgrade Start
√
Title
"The latest version of the firmware is already
installed. There is no need to update."
• If the player is not in “No Disc” :
“Please maintain "No Disc" state for network
update.”
System Information
Network Setup
√
√
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
When the installation is done, you will see a
message of “Update Completed”.
The player will automatically turn off in 3 seconds.
All settings will revert to the factory settings. And the
next time you start the system, you will see the menu
language selection window.
To perform the system upgrade, press the œ √
buttons to select Start and then press the ENTER
button.
9
6
7
BD Player
No Disc
System Upgrade
System Upgrade
The new update data was found.
√
Current Version
√
√
XXXXX
New Version
BD Player
No Disc
System Upgrade
XXXXX
System Upgrade
Start
Cancel
√
√
√
Firmware Update
MOVE
SELECT
RETURN
EXIT
Now, Processing...
Please, do not turn off the power.
The system update gets started.
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
System Upgrade
System Upgrade
BD Player
No Disc
System Upgrade
√
√
√
System Upgrade
Downloading update data...
√
P
l
e
a
s
e, do not turn off the power.
√
√
Update completed.
Cancel
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
System Upgrade
System Upgrade
√
√
√
Verifying update data
ꢀꢀꢀꢀꢀIf you want to cancel the upgrade in the
Please wait...
process of downloading the upgrade data,
press the ENTER button.
NOTE
You will see a confirmation message.
Selecting Yes will end the upgrade process,
and selecting No will proceed with the
verification step.
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
System Upgrade
When the verification is done, you will see a window
that allows you to update firmware. To perform the
firmware update,press the œ √ buttons to select Yes
and then press the ENTER button.
System Upgrade
8
√
Do you w
a
n
t
t
o
ca
n
c
el
the update
√
√
operation?
Yes
No
BD Player
No Disc
System Upgrade
System Upgrade
MOVE
SELECT
RETURN
EXIT
√
Do you wantote Firmware?
t
u
p
d
a
√
√
Yes
No
ꢀꢀꢀꢀꢀWhen the system upgrade is done, check the
firmware details in the System Upgrade menu.
MOVE
SELECT
RETURN
EXIT
ꢀꢀ You will see a message about the upgrade process for
3seconds
.
• If HDMI-related update is included: Starting HDMI Update.
If current output mode is HDMI, the screen will turn black
while updating. The power will be off automatically after
update is finished.
ꢀꢀꢀꢀꢀDO NOT turn off the player during the System
Upgrade Otherwise, the player may not work
properly.
Caution
• In a normal case: Starting Sub F/W Update. When update
is finished, the power will be off after the tray is closed.
ꢀꢀ If you do not want to update firmware, select No and then
press the ENTER button.
46 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
System Information
Press the ENTER button to select OK.
5
System Upgrade menu will be displayed.
When the firmware upgrade is done, check the firmware
details by following the steps below.
BD Player
No Disc
System Upgrade
System Information
√
√
√
With the unit in Stop mode, press the MENU
S/W : XXXXXXX
1
button.
Region : A/01
OK
Press the …† buttons to select Setup,
2
3
4
then press the ENTER or √ button.
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
Setup
Language Setup
Audio Setup
√
√
√
√
√
√
Title
Network Setup
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
If the firmware upgrade did not succeed by following the
instructions on pages 45-46, you may need to set up your
IP address by following the steps below.
MOVE
SELECT
RETURN
EXIT
To setup follow 1 and 3 on left.
Press the …† buttons to select Network setup,
Press the …† buttons to select System Upgrade,
then press the ENTER or √ button.
4
then press the ENTER or √ button.
You will see a menu that allows you to make network
settings.
BD Player
No Disc
System Upgrade
BD Player
No Disc
System Upgrade
Upgrade Start
√
Title
System Information
Network Setup
√
√
Upgrade Start
√
Title
Music
Photo
Setup
System Information
Network Setup
√
√
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select System Information,
then press the ENTER or √ button.
You can see detailed information about the current
firmware.
Press the …† buttons to select DHCP, then press
the ENTER button.
5
BD Player
No Disc
System Upgrade
BD Player
No Disc
System Upgrade
Network Setup
DHCP
IP Address
Subnet Mask
Gateway
DNS
Primary DNS
Secondary DNS
:
On
√
:
000 .000 .000 .000
255 .255 .255 .000
√
Upgrade Start
√
:
Title
:
000 .000 .000 .000
Manual
000 .000 .000 .000
000 .000 .000 .000
√
System Information
Network Setup
√
√
:
:
:
Music
Photo
Setup
Save
Cancel
MOVE
SELECT
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
ꢀ
ꢀ
If DHCP is set to On, you can't select IP
Address, Subnet Mask or Gateway.
NOTE
If DNS is set to Automatic, you can’t select
Primary/ Secondary DNS.
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the …† buttons to select a desired item, then
Setting up the Parental
Lock
The Parental Lock function works in conjunction with
BD/DVDs that have been assigned a rating which helps
you control the types of BD/DVDs that your family
watches. There are up to 8 rating levels on a disc.
6
press the ENTER button.
ꢀꢀ
If DHCP is set to Off and DNS is set to Manual
BD Player
No Disc
System Upgrade
Network Setup
DHCP
IP Address
Subnet Mask
:
:
:
Off
√
000 .000 .000 .000
255 .255 .255 .000
√
Gateway
:
000 .000 .000 .000
√
DNS
:
:
:
manual
000 .000 .000 .000
000 .000 .000 .000
Setup
available
Primary DNS
Secondary DNS
Save
Cancel
MOVE
SELECT
RETURN
EXIT
With the unit in Stop mode, press the MENU
button.
ꢀꢀ
If DHCP is set to On and DNS is set to Manual
1
2
BD Player
No Disc
System Upgrade
Network Setup
DHCP
IP Address
Subnet Mask
:
:
:
On
√
√
Press the …† buttons to select Setup, then press
the ENTER or √ button.
000 .000 .000 .000
255 .255 .255 .000
Setup not
available
Setup
available
DNS
Gateway
:
000 .000 .000 .000
manual
000 .000 .000 .000
000 .000 .000 .000
√
:
:
:
Primary DNS
BD Player
BD
Setup
Secondary DNS
Save
Cancel
Language Setup
Audio Setup
√
√
√
√
√
√
Title
MOVE
SELECT
RETURN
EXIT
Display Setup
HDMI Setup
Music
Photo
Setup
System Upgrade
Parental Setup
ꢀꢀ
If DHCP is set to On and DNS is set to Automatic
MOVE
SELECT
RETURN
EXIT
BD Player
No Disc
System Upgrade
Network Setup
DHCP
IP Address
Subnet Mask
:
:
:
On
√
000 .000 .000 .000
255 .255 .255 .000
√
DNS
Gateway
:
000 .000 .000 .000
Automatic
000 .000 .000 .000
000 .000 .000 .000
√
Press the …† buttons to select Parental Setup, then
press the ENTER or √ button.
When you operate your Blu-ray disc player for the
first time, the “Enter New password” message will be
displayed.
:
:
:
Setup not
available
Primary DNS
3
4
Secondary DNS
Save
Cancel
MOVE
SELECT
RETURN
EXIT
BD Player
BD
Parental Setup
Title
Enter New password
Music
Photo
Setup
ꢀꢀꢀꢀꢀwhen you select an item, use the number and
…†œ √ buttons.
NOTE
MOVE
SELECT
RETURN
EXIT
When done, use the …† buttons to select Save, then
press the ENTER button.
Enter the 4-digit password using the number buttons
on the remote control.
The “Confirm the password” message will be
displayed. Enter your password again.
7
8
If you don’t want to save your work, use the …†œ √
buttons to select Cancel, then press the ENTER
button.
BD Player
BD
Parental Setup
Title
Confirm the password
Music
Photo
Setup
ꢀꢀꢀꢀꢀThe IP address used in this manual is for
illustrative purposes only. Therefore, you must
refer to the your network settings and do not
enter the address presented in this manual.
Caution
MOVE
SELECT
RETURN
EXIT
48 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Password
Press the ENTER or √ button to select Use Password.
5
BD Player
BD
Parental Setup
Press the …† buttons to select New Password, then
Use password
Rating Level
: Off
√
√
√
Title
1
press the ENTER or √ button.
: 8 (Adults)
New Password
Music
Photo
Setup
BD Player
BD
Parental Setup
Use password
Rating Level
: Off
√
√
√
Title
: 8 (Adults)
New Password
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select On or Off, then press
MOVE
SELECT
RETURN
EXIT
6
the ENTER button.
BD Player
BD
New Password
ꢀꢀ
Press the RETURN or œ button to return to
Title
the previous menu.
Press the MENU button to exit the menu.
NOTE
Enter New password
Music
Photo
Setup
If you forgot your password
MOVE
SELECT
RETURN
EXIT
Remove the disc.
Enter the 4-digit password using the number buttons
on the remote control. The “Confirm the password”
message will be displayed.
1
2
3
Press and hold the
5 seconds or more.
• All settings will revert to the factory settings.
button on the front panel for
2
BD Player
BD
New Password
Title
Confirm the password
Music
Photo
Setup
Setting the Rating Level
Press the …† buttons to select Rating Level, then
press the ENTER or √ button.
MOVE
SELECT
RETURN
EXIT
1
BD Player
BD
Parental Setup
Enter your password again using the number
buttons on the remote control.
8 (Adults)
Use password
Rating Level
New Password
Title
7
6
Music
Photo
Setup
5
4
3
2
1 (Kids)
MOVE
SELECT
RETURN
EXIT
Press the …† buttons to select the rating level you want,
then press the ENTER button. For example, if you select
up to Level 6, discs that contain Level 7, 8 will not play.
A larger number indicates that the program is intended
for adult use only.
2
BD Player
BD
Parental Setup
Use password
Rating Level
: Off
√
√
√
Title
: 8 (Adults)
New Password
Music
Photo
Setup
MOVE
SELECT
RETURN
EXIT
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Reference
Before requesting service (troubleshooting), please check
the following.
No operations can be performed with the
remote control.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more
than 20 feet.
• Remove batteries and hold down one or more buttons
for several minutes to drain the microprocessor inside
the remote control to reset it. Reinstall batteries and try
to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side
facing up.
• Check the region number of the BD/DVD.
5.1 channel sound is not being reproduced.
• 5.1 channel sound is reproduced only when the
following conditions are met. :
1. The Blu-ray disc player is connected with the proper
Amplifier
2. The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch”
mark on the outside.
• Check if your audio system is connected and working
properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
Disc Menu doesn’t appear.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .50
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .52
• Check if the disc has a Menu.
50 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
The
icon appears on screen.
If you experience other problems.
• The features or action cannot be completed at this
time because:
• Go to the contents and find the section of the
instruction book that contains the explanations
regarding the current problem, and follow the procedure
once again.
1. The BD/DVD’s software restricts it.
2. The BD/DVD’s software doesn’t support the feature
(e.g., angles)
• If the problem still cannot be solved, please contact
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or
search time that is out of range.
your nearest Samsung authorized service center.
The picture is noisy or distorted
Play mode differs from the Setup Menu selection.
• Make sure that the disc is not dirty or scratched.
• Some of the functions selected in the Setup Menu may
not work properly if the disc is not encoded with the
corresponding function.
• Clean the disc.
No HDMI output.
The screen ratio cannot be changed.
• Check the Video output is set to HDMI.
• Check the connection between the TV and the HDMI
jack of Blu-ray disc player.
• The Screen Ratio is fixed on your BD/DVDs.
• Check if your TV supports 480p/720p/1080i/1080p
HDMI input resolution.
No audio.
Abnormal HDMI output screen.
• Make sure you have selected the correct Digital Output
in the Audio Options Menu.
• If random noise appears on the screen, it means that
TV does not support HDCP (High-bandwidth Digital
Content Protection).
The screen is blocked
• Press the
button (in front panel) for more than
5 seconds with no disc inside. All settings will revert to
the factory settings.
• Check video output mode.
Forgot password
• Press the
button (in front panel) for more than
5 seconds with no disc inside. All settings including the
password will revert to the factory settings. Don't use
this unless absolutely necessary.
English - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Requirements
Power Consumption
Weight
AC 120V ~ 60Hz
40 W
9.3 Ibs
General
Dimensions
16.9 (W) x 12.8 (D) x 3.1 (H) inches
+
+
Operating Temperature Range
Operating Humidity Range
BD (Blu-ray Disc)
41° F to 95° F
10 % to 75 %
Reading Speed : 4.917m/sec
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
DVD
(Digital Versatile Disc)
Disc
CD : 12cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8cm
(COMPACT DISC)
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Blu-ray Disc : 480i
DVD : 480i
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video
Component Video
Output
Blu-ray Disc : 1080i, 720p, 480p, 480i DVD : 480p, 480i
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
S-Video
Blu-ray Disc : 480i
DVD : 480i
1080p, 1080i, 720p, 480p
Video/Audio
HDMI
PCM multichannel audio, Bitstream audio, PCM audio
L(1/L), R(2/R)
2 Channel
5.1 Channel
F/L, F/R, R/L, R/R, C/T, S/W
Optical/Coaxial
Digital Audio Output
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
Audio
*Frequency Response
Output
*S/N Ratio
100 dB
*Dynamic Range
0.003%
*Total Harmonic Distortion
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
52 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY PROTECTION
Compliance and Compatibility Notice
NOT ALL discs are compatible
•
Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc., of
AACS protected contents. The operation of this
product and restrictions on this product may vary
depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection system for
BD format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark
and/or BD+ protected contents. To obtain additional
information on AACS, BD-ROM Mark, BD+, or this
product, please contact SAMSUNG customer care
center.
Many BD/DVD discs are encoded with copy
protection. Because of this, you should only connect
your Blu-ray disc player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected BD/DVD discs.
• This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation and is intended for home
and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright laws of
other countries, unauthorized recording, use, display,
distribution, or revision of television programs,
videotapes, BDs, DVDs, CDs and other materials
may subject you to civil and/or criminal liability.
•
Subject to the restrictions described below and those
noted throughout this Manual, including the Disc Type
and Characteristics section of this Manual, disc types that
can be played are: pre-recorded commercial BD-ROM,
DVD-Video, and Audio CD discs; BD-RE/-R, DVD-RAM,
and DVD-RW / DVD-R discs; and CD-RW / CD-R discs.
Discs other than the above cannot and/or is not intended
to be played by this player. And some of the above discs
may not play due to one or more reasons provided below.
•
• HD DVD discs cannot be played in this player.
•
Samsung cannot assure that this player will play every
disc bearing the BD-ROM, BD-RE, BD-R, DVD-Video,
DVD-RAM, DVD-RW / DVD-R and CD-RW / CD-R logos,
and this player may not respond to all operating
commands or operate all features of every disc. These
and other disc compatibility and player operation issues
with new and existing format discs are possible because:
- BD format is a new and evolving format and this player may not
operate all features of BD discs because some features may be
optional, additional features may have been added to the BD
format after the production of this player, and certain available
features may be subject to delayed availability;
- not all new and existing disc format versions are supported by
this player;
- new and existing disc formats may be revised, changed,
updated, improved and/or supplemented;
•
- some discs are produced in a manner that allows specific or
limited operation and feature during playback;
- some features may be optional, additional features may have
been added after the production of this player or certain
available features may be subject to delayed availability;
- some discs bearing the BD-ROM, BD-RE, BD-R, DVD-Video,
DVD-RAM, DVD-RW / DVD-R and CD-RW / CD-R logos may
still be non-standardized discs;
•
- some discs may not be played depending on their physical
state or recording conditions;
- problems and error can occur during the creation of BD, DVD
and CD software and/or the manufacture of discs;
- this player operates differently than a standard DVD player or
other AV equipment; and/or
-
for reasons noted throughout this Manual and for other reason(s)
discovered and posted by SAMSUNG customer care center.
•
•
If you encounter disc compatibility or player operation
problems, please contact SAMSUNG customer care
center. You may also contact SAMSUNG customer care
center for possible updates on this player.
For additional information on playback restrictions and disc
compatibility, refer to the Precautions, Before Reading the
User’s Manual, Disc Types and Characteristics, and Before
Playing sections of this Manual.
English - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty (for USA users only)
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in
the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for the following limited warranty period:
One (1) Year Parts / Ninety Days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States, and does
not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by SAMSUNG’s authorized service
center. To receive warranty service, the original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or
SAMSUNG’s authorized service center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective during
the limited warranty period specified above. The product must be returned during the warranty period with transportation charges prepaid to
SAMSUNG’s designated service center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for problem
determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products
assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product
and shall not apply to the following, including, but not limited to: damage which occurs in shipment; applications and uses for which this
product was not intended; failures or problems which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse,
abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage
caused by improper or faulty installation; improper connection with any peripheral; product alteration or modification; improper or unauthorized
repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating instructions, customer adjustments,
maintenance and environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized
parts, supplies, accessories or equipment which damage this product or result in service problems; failures or problems due to incompatibility
with other equipment.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner
whatsoever. The time within which an action must be commended to enforce any obligations of SAMSUNG arising under the warranty or under
any statute, or law of the United States or of any state thereof, is hereby limited to ninety (90) days from the date you discovered or should have
discovered the defect. This limitation does not apply to implied warranties arising under state law, if any.
SAMSUNG does not warrant (i) disc compatibility with new and existing format discs or (ii) error free playback in full compliance with
specifications of the compatible disc formats, and SAMSUNG shall not be liable for any data loss recorded in your discs.
SAMSUNG’s responsibility shall be limited to appropriate warranty services during the warranty period through SAMSUNG customer care center.
If you encounter compatibility or data loss problems, please contact SAMSUNG customer care center.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE
BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS
OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR
INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF
SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST
SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE
OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG.
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
54 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region
Country
Customer Care Center
Web Site
English - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
|