Samsung Blu ray Player BD C5500 User Guide

BD-C5500  
BD-C5500C  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Warning  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle  
triangle is a warning sign alerting you of  
dangerous voltage inside the product.  
SHOCK, DO NOT REMOVE COVER (OR BACK)  
is a warning sign alerting you of important  
NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING  
CLASS 1 LASER PRODUCT  
To reduce the risk of fire or electric shock, do  
This Compact Disc player is classified as a CLASS  
1 LASER product. Use of controls, adjustments  
or performance of procedures other than those  
specified herein may result in hazardous radiation  
exposure.  
not expose this appliance to rain or moisture.  
FCC NOTE (for U.S.A)  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and on.  
Complies with 21CFR 1040.10 except for  
deviations pursuant to Laser Notice No. 50, dated  
June 24, 2007.  
DANGER :  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN. AVOID DIRECT EXPOSURE TO  
BEAM. (FDA 21 CFR)  
CAUTION :  
CLASS 3B VISIBLE AND INVISIBLE LASER  
RADIATION WHEN OPEN. AVOID EXPOSURE  
TO THE BEAM (IEC 60825-1)  
The user is encouraged to try to correct the  
interference by one or more of the following measures.  
Reorient or relocate the receiving antenna.  
THIS PRODUCT UTILIZES A LASER. USE  
OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE. DO NOT OPEN COVER AND DO  
NOT REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
Increase the separation between the equipment  
and receiver.  
Connect this equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
This class B digital product meets all  
requirements of the Canadian Interference -  
Causing Equipment Regulations.  
CLASS 1  
KLASSE 1  
LUOKAN 1  
KLASS 1  
LASER PRODUCT  
LASER PRODUKT  
LASER LAITE  
Note to CATV system installer  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
This reminder is provided to call CATV system  
installer’s attention to Article 820-40 of the  
National Electrical Code (Section 54 of Canadian  
Electrical Code, Part I) that provides guidelines  
for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the  
grounding system of the building as close to the  
point of cable entry as practical.  
NOTE  
If the Region number of a Blu-ray Disc/DVD disc  
does not correspond to the Region number of this  
player, the player cannot play the disc.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Precautions  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
Important Safety Instructions  
Read these operating instructions carefully before  
using the unit. Follow all the safety instructions  
listed below.  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
Keep these operating instructions handy for future  
reference.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
Disc Storage & Management  
4. Follow all instructions.  
Disc Handling  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
Disc Shape  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
Use discs with regular  
shapes. If an irregular disc  
(a disc with a special shape)  
is used, this player may be damaged.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
Holding discs  
Avoid touching the surface of a  
disc where recording is performed.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
Blu-ray Discs  
If the player is not used for a long period of time,  
remove the Blu-ray Disc from the player and  
store it in its case.  
Be careful not to leave fingerprints or scratches  
on the surface of the Blu-ray Disc.  
DVD-VIDEO, Audio CD (CD-DA)  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
Wipe off dirt or contamination on the disc with a  
soft cloth.  
11. Only use attachments/accessories specified  
by the manufacturer.  
12. Use only with the cart,  
stand, tripod, bracket,  
or table specified by the  
manufacturer, or sold with  
the apparatus. When a cart  
is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be sure to remove the disc and turn off the  
player after use.  
Disc Storage  
Be careful not to damage the disc because the  
data on these discs is highly vulnerable to the  
environment.  
Disconnect the AC power cord from the AC  
outlet when you don’t intend to use the player  
for long periods of time.  
Do not keep under direct sunlight.  
Keep in a cool ventilated area.  
Store vertically.  
To clean a disc, wipe it in a straight  
line from the inside to the outside of  
the disc.  
Keep in a clean protection jacket.  
Do not expose the player to any  
liquid.  
If you move your player suddenly from a cold  
place to a warm place, condensation may  
generate on the operating parts and lens and  
cause abnormal disc playback. If this occurs,  
wait for two hours before connecting the plug to  
the power outlet.  
When the AC plug is connected to a wall outlet,  
the player will still draw power (standby mode)  
when it is turned off.  
Apparatus shall not be exposed to dripping or  
splashing and no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
Then insert the disc and try to play back again.  
The main plug is used as a disconnect device  
and shall stay readily operable at any time.  
Handling Cautions  
Do not write on the printed side with a ball-point  
pen or pencil.  
Maintenance of Cabinet  
Do not use record cleaning sprays or antistatic.  
Also, do not use volatile chemicals, such as  
benzene or thinner.  
For safety reasons, be sure to disconnect the AC  
power cord from the AC outlet.  
Do not use benzene, thinner, or other solvents  
for cleaning.  
Do not apply labels or stickers to discs. (Do not  
use discs fixed with exposed tape adhesive or  
leftover peeled-off stickers.)  
Wipe the cabinet with a soft cloth.  
Do not use scratch-proof protectors or covers.  
Restrictions on Playback  
Do not use discs printed with label printers  
available on the market.  
This player may not respond to all operating  
commands because some Blu-ray, DVD and  
CD discs allow specific or limited operation and  
features during playback.  
Do not load warped or cracked discs.  
Before connecting other components to this  
player, be sure to turn them all off.  
Please note that this is not a defect in the  
player.  
Do not move the player while a disc is being  
played as the disc may be scratched or broken,  
or the player’s internal parts may be damaged.  
Samsung cannot assure that this player will  
play every disc bearing the Blu-ray Disc, DVD  
or CD logo because disc formats evolve, and  
problems and errors may occur during the  
creation of Blu-ray Disc, DVD, CD software  
and/or the manufacture of discs.  
Do not put a flower vase filled with water or any  
small metal objects on the player.  
Be careful not to put your hand into the disc  
tray.  
Do not place anything other than the disc in the  
disc tray.  
Please contact the SAMSUNG customer care  
center if you have questions or encounter  
difficulty in playing Blu-ray, DVD, or CD discs  
in this player. Also, refer to rest of this user  
manual for additional information on playback  
restrictions.  
Exterior interferences such as lightning and  
static electricity can affect the normal operation  
of this player. If this occurs, turn the player  
off and on again with the POWER button, or  
disconnect and then reconnect the AC power  
cord to the AC power outlet. The player will  
operate normally.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
2
2
Blu-ray Disc Features  
KEy FEATURES  
Blu-ray Disc Player Features  
3
4
4
4
4
Warning  
SAFETy INFORMATION  
Precautions  
Important Safety Instructions  
Disc Storage & Management  
Disc Handling  
10 Before using the User Manual  
GETTING STARTED  
10  
10  
11  
11  
13  
13  
14  
Disc Types and Contents that can be played.  
Disc types that cannot be played  
Blu-ray Disc Compatibility  
Disc Types  
Region Code  
Copyright  
Logos of Discs that can be played  
14 Accessories  
15 Front Panel  
16 Front Panel Display  
17 Rear Panel  
18 Remote Control  
18  
19  
19  
Tour of the Remote Control  
Setting the Remote Control  
Controllable TV Codes  
20 Connecting to a TV  
CONNECTIONS  
20  
21  
22  
23  
Case 1 : Connecting to a TV with an HDMI Cable  
- Best Quality (Recommended)  
Case 2 : Connecting to a TV with DVI Cable  
- Best Quality (Recommended)  
Case 3 : Connecting to a TV (Component)  
- Better Quality  
Case 4 : Connecting to a TV (Video)  
- Good Quality  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Connecting to an Audio System  
CONNECTIONS  
24  
Case 1 : Connecting to an Audio System  
(HDMI Supported Amplifier) - Best Quality  
(Recommended)  
25  
25  
Case 2 : Connecting to an Audio System  
(Dolby Digital, DTS Amplifier) - Better Quality  
Case 3 : Connecting to an Audio System  
(2 Channel Amplifier) - Good Quality  
26 Connecting to the Network  
26  
27  
Cable Network  
Wireless Network  
28 Before Starting (Initial Settings)  
29 Setting the Menu  
30 Display  
SETUP  
30  
30  
30  
32  
32  
32  
32  
32  
TV Aspect  
BD Wise (Samsung Players only)  
Resolution  
HDMI Format  
Movie Frame (24Fs)  
Progressive Mode  
Still Mode  
HDMI Deep Color  
32 Audio  
32  
33  
34  
34  
34  
Digital Output  
PCM Downsampling  
Dynamic Range Control  
Downmixing Mode  
DTS Neo:6  
34 System  
34  
34  
34  
35  
35  
35  
36  
Initial Settings  
Internet@TV Screen Size  
Anynet+(HDMI-CEC)  
BD Data Management  
Clock  
DivX(R) Registration  
DivX(R) Deactivation  
36 Network  
36  
39  
40  
Network Settings  
Network Status  
BD-LIVE Internet Connection  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
40 Language  
SETUP  
40 Security  
40  
40  
Parental Rating  
Change Password  
41 General  
41  
41  
41  
41  
Background  
Energy Saving  
Front Display  
Power On/Off Sound  
41 Support  
41  
42  
Software Upgrade  
Contact Samsung  
43 Playing a Disc  
BASIC FUNCTIONS  
43  
43  
Playback  
Disc Structure  
43 Using the Disc menu/Title menu/Popup menu  
43  
43  
43  
44  
Using the Disc Menu  
Using the Title Menu  
Playing the Title List  
Using the Popup Menu  
44 Using the Search and Skip Functions  
44  
44  
Searching for a Desired Scene  
Skipping Chapters  
44 Slow Motion Play/Step Motion Play  
44  
44  
Slow Motion Play  
Step Motion Play  
45 Repeat Playback  
45  
45  
Repeat the Title or Chapter  
Repeat the Section  
45 Using the TOOLS button  
45  
46  
46  
46  
46  
47  
Moving to a Desired Scene Directly  
Selecting the Audio Language  
Selecting the Subtitle Language  
Changing the Camera Angle  
Selecting the Picture Setting  
Setting BONUSVIEW  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47 Listening to Music  
BASIC FUNCTIONS  
47  
Buttons on the Remote Control used for Music  
Playback  
48  
48  
48  
Playing an Audio CD (CD-DA)/MP3  
Repeat an Audio CD (CD-DA)/MP3  
Playlist  
49 Playing back a Picture  
49  
49  
Playing a JPEG Disc  
Using the TOOLS button  
50 Playing back a USB Storage Device  
51  
Notes on USB connection  
52 Using Internet@TV  
NETWORK SERvICES  
APPENDIx  
52  
54  
55  
Getting Started with Internet@TV  
Settings  
Samsung Apps  
56 BD-LIVE™  
56 Software Upgrade Notification  
56 Using the AllShare Function  
58 Troubleshooting  
61 Index  
62 Specifications  
63  
63  
64  
65  
Compliance and Compatibility Notice  
Copy Protection  
Network Service Disclaimer  
License  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Before using the User Manual  
Disc Types and Contents that can be played.  
Term  
Logo  
Icon  
Definition  
BD-ROM  
This involves a function available on a BD-ROM.  
h
Z
BD-RE/-R  
This involves a function available on a BD-RE/-R disc recorded in the BD-RE format.  
This involves a function available on a DVD-VIDEO.  
DVD-VIDEO  
DVD-RW(V)  
DVD-R  
DVD+RW  
This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R  
discs that have been recorded and finalized.  
DVD+R  
Audio CD  
This involves a function available on an audio CD-RW/-R (CD-DA format).  
o
G
MP3  
This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a  
-
-
WMA  
USB storage media containing MP3 or WMA contents.  
This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a  
USB storage media containing JPEG contents.  
JPEG  
DivX  
MKV  
MP4  
This involves a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a  
USB storage media containing DivX, MKV, MP4 contents.  
-
NOTE  
The player may not play certain CD-RW/-R and DVD-R due to the disc type or recording conditions.  
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.  
If contents which are consisting of more than 10 Mbps bit-rate have been recorded in DVD-R, it is not supported.  
If contents which are consisting of more than 30 Mbps bit-rate have been recorded in BD-R or USB, it is not supported.  
Disc types that cannot be played  
HD DVD  
DVD-RAM  
DVD-RW(VR mode)  
3.9 GB DVD-R Disc for  
Authoring.  
DVD-ROM/PD/MV-  
Disc, etc  
Super Audio CD  
(except CD layer)  
CVD/CD-ROM/CDV/  
CD-G/CD-I/LD  
(CD-Gs play audio only,  
not graphics.)  
10  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Disc Types  
Some commercial discs and DVD discs purchased  
outside your region may not be playable with this  
player. When these discs are played, either “This  
disc can not be played.” or “Cannot read this disc.  
Please check the regional code of the disc.” will be  
displayed.  
BD-ROM  
This Blu-ray disc can only be played back.  
This player can play back pre-recorded  
commercial BD-ROM discs.  
Playback may not work for some types of discs, or  
when specific operations, such as angle change and  
aspect ratio adjustment, are being performed.  
Information about the discs is written in detail on the  
disc box. Please refer to this if necessary.  
BD-RE/-R  
This Blu-ray disc can be recorded and played  
back.  
This player can play back a BD-RE/-R disc  
recorded by other compatible Blu-ray disc  
recorders.  
Do not allow the disc to become dirty or scratched.  
Fingerprints, dirt, dust, scratches or deposits of  
cigarette smoke on the recording surface may make  
it impossible to use the disc for playback.  
DVD-VIDEO  
Discs with PAL programs recorded on them cannot  
This player can play back pre-recorded  
commercial DVD discs (DVD-VIDEO discs) with  
movies.  
be played using this player.  
This player is compatible with the NTSC color system  
only.  
When switching from the first layer to the  
second layer of a dual-layered DVD-VIDEO disc,  
there may be momentary distortion in the image  
and sound. This is not a malfunction of the  
player.  
When a BD-J title is played, loading may take longer  
than a normal title, or some functions may perform  
slowly.  
This player may not respond to all operating  
commands because some Blu-ray, DVD and CD  
discs allow specific or limited operation and features  
during playback.  
DVD-RW  
This player can play back a DVD-RW disc  
recorded and finalized with a DVD video recorder.  
Ability to play back may depend on recording  
conditions.  
Please note that this is not a defect in the player.  
Samsung cannot assure that this player will play  
every disc bearing the Blu-ray Disc, DVD or CD logo  
because disc formats evolve, and problems and  
errors may occur during the creation of Blu-ray Disc,  
DVD, CD software and/or the manufacture of discs.  
Please contact the SAMSUNG customer care center  
if you have questions or encounter difficulty when  
playing Blu-ray, DVD, or CD discs in this player.  
Also, refer to rest of this user manual for additional  
information on playback restrictions.  
DVD-R  
This player can play back a DVD-R disc recorded  
and finalized with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
DVD+RW  
This player can play back a DVD+RW disc  
recorded with a DVD Video recorder. Ability to  
play back may depend on recording conditions.  
Blu-ray Disc Compatibility  
Blu-ray Disc is a new and evolving format.  
Accordingly, disc compatibility issues are possible.  
Not all discs are compatible and not every disc will  
play back. For additional information, refer to the  
Compliance and Compatibility Notice section of  
this user manual.  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
DVD+R  
AVCHD (Advanced Video Codec High  
Definition)  
This player can play back a DVD+R disc  
recorded and finalized with a DVD Video  
recorder. Ability to play back may depend on  
recording conditions.  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
The AVCHD format is a high definition digital  
video camera format.  
Audio CD (CD-DA)  
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
This player can play back CD-DA format audio  
CD-RW/-R discs.  
The player may not be able to play some  
CD-RW/-R discs due to the condition of the  
recording.  
Some AVCHD discs use the “x.v.Color” format.  
This player can playback AVCHD discs using  
“x.v.Color” format.  
CD-RW/-R  
“x.v.Color” is a trademark of Sony Corporation.  
Use a 700MB(80 minutes) CD-RW/-R disc.  
If possible, do not use a 800MB(90 minutes) or  
above disc, as the disc may not play back.  
“AVCHD” and the AVCHD logo are trademarks  
of Matsushita Electronic Industrial Co., Ltd. and  
Sony Corporation.  
If the CD-RW/-R disc was not recorded as a  
closed session, you may experience delays  
when playing back the beginning of the disc or  
all recorded files may not play.  
NOTE  
Some AVCHD format discs may not play, depending  
on the recording condition.  
Some CD-RW/-R discs may not be playable  
with this player, depending on the device which  
was used to burn them. For contents recorded  
on CD-RW/-R media from CDs for your  
personal use, playability may vary depending on  
contents and discs.  
AVCHD format discs need to be finalized.  
“x.v.Color” offers a wider color range than normal  
DVD camcorder discs.  
Some DivX, MKV and MP4 format discs may not  
play, depending on the video resolution and frame  
rate condition.  
1ꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region Code  
Copyright  
Both the player and the discs are coded by region.  
These regional codes must match in order to play  
the disc. If the codes do not match, the disc will  
not play.  
© 2010 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this user’s  
manual may be reproduced or copied without the  
prior written permission of Samsung Electronics  
Co.,Ltd.  
The Region Number for this player is described on  
the rear panel of the player.  
Region  
Disc Type  
Blu-ray  
Area  
Code  
North America, Central America,  
South America, Korea, Japan,  
Taiwan, Hong Kong and South  
East Asia.  
A
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
B
India, China, Russia, Central  
and South Asia.  
C
1
2
3
The U.S., U.S. territories and  
Canada  
Europe, Japan, the Middle East,  
Egypt, South Africa, Greenland  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
DVD-VIDEO  
4
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
5
6
China  
English  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Logos of Discs that can be played  
Blu-ray Disc  
DTS-HD Master Audio  
DivX  
BD-LIVE  
NTSC broadcast system in U.S.A, Canada,  
Korea, Japan  
Dolby TrueHD  
Java  
Accessories  
Check for the supplied accessories below.  
Audio/Video cable  
(AC39-00073A)  
HDMI cable (BD-C5500C only)  
Batteries for Remote Control (AAA Size)  
(AC43-12002H)  
(MF39-00299A)  
TV  
POWER  
POWER  
BONUSVIEW  
SOURCE  
SUBTITLE  
AUDIO  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
INFO  
EXIT  
RETURN  
INTERNET@ FULL SCREEN REPEAT  
79  
MUTE  
VOL  
CH  
AK59-00104R  
User Manual  
Quick Guide  
Remote Control  
(AK59-00104R)  
(AK68-01854A)  
(AK68-01855A)  
1ꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
b c  
def g  
h
DISC TRAY  
Opens to accept a disc.  
1
2
3
4
5
6
7
REMOTE CONTROL SENSOR Detects signals from the remote control.  
DISPLAY  
Displays the playing status, time, etc.  
Opens and closes the disc tray.  
Stops disc playback.  
OPEN/CLOSE BUTTON  
STOP BUTTON  
PLAY/PAUSE BUTTON  
POWER BUTTON  
Plays a disc or pauses playback.  
Turns the player on and off.  
A USB memory flash stick can be connected here and used as storage when  
connected to BD-LIVE. It can also be used for software upgrades and MP3/JPEG/  
DivX/MKV/MP4 playback.  
USB HOST  
8
NOTE  
Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.  
In disc menu of BD title, it does not operate play action by front panel's PLAY button.  
English  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Front Panel Display  
a
b
c
IN DISC INDICATOR  
Lights when a disc is inserted or played back.  
Displays the play time and the current status.  
Lights when the wireless network is connected.  
1
CURRENT TIME AND  
2
STATUS INDICATOR  
WIFI INDICATOR  
3
1ꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
ab c  
d
g f e  
Connect the optional Wireless LAN Adapter (WIS09ABGN) here to use the Wireless  
network.  
WIRELESS LAN ADAPTER  
1
2
3
Can be used for network based services (See pages 52~57), BD-LIVE and software  
upgrades using a network connection.  
LAN  
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal  
on your TV for the best quality picture or to your Receiver for the best quality sound.  
HDMI OUT  
COMPONENT OUT  
VIDEO OUT  
Connects to equipment having component video input.  
Connects the input of external equipment using a video cable.  
Connects to the audio input of external equipment using audio cables.  
Connects to a Receiver.  
4
5
6
7
AUDIO OUT  
DIGITAL AUDIO OUT  
English  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Remote Control  
Tour of the Remote Control  
TV  
POWER  
POWER  
Turn the player on and off.  
Turn the TV on and off.  
(To operate your TV, please refer to page 19)  
To open and close the disc tray.  
BONUSVIEW  
SOURCE  
After setup, allows you to set the input  
source on your TV.  
Press this to use Bonusview function.  
Press numeric buttons to operate options.  
SUBTITLE  
AUDIO  
Use this to access various audio functions  
on a disc (Blu-ray Disc/DVD).  
Press this to switch the Blu-ray Disc/DVD’s  
subtitle language.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
Press to stop a disc.  
Use this to enter the disc menu.  
Press to pause a disc.  
Press to play a disc.  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
Use this to enter the popup menu/title  
menu.  
Press this to move to the home menu.  
Press this to use Tools menu.  
INFO  
Use this to display the playback information  
during playing a Blu-ray/DVD disc.  
Select menu items and change menu value.  
RETURN  
EXIT  
Return to the previous menu.  
Press this to exit the menu.  
These buttons are used both for menus  
on the player and also several Blu-ray Disc  
functions.  
Press this to link to various Internet@TV  
services.  
INTERNET@ FULL SCREEN REPEAT  
Press this to see the full screen on a TV.  
79  
Allows you to repeat a title, chapter, track  
or disc.  
MUTE  
VOL  
CH  
TV volume adjustment.  
AK59-00104R  
Use this to select a TV program.  
Mutes the speakers of your TV.  
Installing batteries  
NOTE  
If the remote does not operate properly :  
Check the polarity +/– of the batteries (Dry-Cell)  
Check if the batteries are drained.  
Check if remote sensor is blocked by obstacles.  
Check if there is any fluorescent lighting nearby.  
1ꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Remote Control  
Controllable TV Codes  
You can control certain functions of your TV with  
this remote control.  
Brand  
SAMSUNG  
AIWA  
Code  
Brand  
NOBLEX  
NOKIA  
Code  
TV POWER+66  
TV POWER+74  
TV POWER+01, +02,  
+03, +04, +05,  
Button  
Function  
+06, +07, +08, +09  
TV POWER+72, +73,  
TV POWER  
Used to switch the television on and off.  
NORDMENDE  
PANASONIC  
PHILIPS  
+75  
TV POWER+82  
Used to select an external source  
TV POWER+53, +54,  
+74, +75  
TV SOURCE  
TV POWER+10, +11,  
connected to the TV.  
ANAM  
+12, +13, +14,  
+15, +16, +17, +18  
TV POWER+06, +55,  
TV VOL (+/–) Used to adjust the volume of the television.  
+56, +57  
BANG & OLUFSEN TV POWER+57  
TV CH (  
/
)
Used to select the desired channel.  
Used to toggle the sound on and off.  
, .  
TV POWER+06, +56,  
+57  
PHONOLA  
PIONEER  
BLAUPUNKT  
BRANDT  
BRIONVEGA  
CGE  
TV POWER+71  
TV POWER+73  
TV POWER+57  
TV POWER+52  
TV MUTE  
TV POWER+58, +59,  
+73, +74  
NOTE  
RADIOLA  
TV POWER+06, +56  
The functions listed above will not necessarily work  
on all televisions. If you encounter problems, operate  
the television directly.  
CONTINENTAL  
RADIOMARELLI TV POWER+57  
TV POWER+75  
EDISON  
RCA  
REX  
TV POWER+45, +46  
TV POWER+74  
TV POWER+19, +20,  
+23, +24, +25,  
+26, +27, +28,  
+29, +30, +31,  
+32, +33, +34  
DAEWOO  
To determine whether your television is  
TV POWER+57, +72,  
SABA  
SALORA  
SANYO  
+73, +74, +75  
compatible, follow the instructions below.  
EMERSON  
FERGUSON  
TV POWER+64  
TV POWER+73  
TV POWER+74  
1. Switch your television on.  
TV POWER+41, +42,  
2. Point the remote control towards the  
TV POWER+06, +49,  
FINLUX  
+43, +44, +48  
+57  
television.  
FORMENTI  
FUJITSU  
TV POWER+57  
TV POWER+84  
TV POWER+70  
SCHNEIDER  
SELECO  
TV POWER+06  
TV POWER+74  
3. Press and hold the TV POWER button and  
enter the two-figure code corresponding to  
the brand of your television by pressing the  
appropriate number buttons.  
GRADIENTE  
TV POWER+36, +37,  
SHARP  
+38, +39, +48  
TV POWER+49, +52,  
GRUNDIG  
+71  
If your television is compatible with the remote  
control, it will switch off.  
SIEMENS  
SINGER  
SINUDYNE  
SONY  
TELEAVA  
TV POWER+71  
TV POWER+57  
TV POWER+57  
TV POWER+35, +48  
TV POWER+73  
TV POWER+60, +72,  
+73, +75  
HITACHI  
It is now programmed to operate with the  
IMPERIAL  
JVC  
TV POWER+52  
remote control.  
TV POWER+61, +79  
NOTE  
TV POWER+06, +19,  
LG  
+20, +21, +22, +78  
If several codes are listed for your television brand,  
TV POWER+67, +73,  
TELEFUNKEN  
+75, +76  
LOEWE  
TV POWER+06, +69  
try each one in turn until you find one that works.  
TV POWER+72, +73,  
+75  
LOEWE OPTA TV POWER+06, +57  
THOMSON  
If you replace the remote control’s batteries, you  
MAGNAVOX  
METZ  
TV POWER+40  
TV POWER+57  
must set the brand code again.  
THOMSON ASIA TV POWER+80, +81  
TV POWER+47, +48,  
TOSHIBA  
TV POWER+06, +48,  
MITSUBISHI  
+49, +50, +51, +52  
+62, +65  
MIVAR  
NEC  
NEWSAN  
TV POWER+52, +77  
TV POWER+83  
TV POWER+68  
WEGA  
YOKO  
ZENITH  
TV POWER+57  
TV POWER+06  
TV POWER+63  
English  
1ꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a Tv  
Case 1 : Connecting to a TV with an HDMI Cable - Best Quality  
(Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN  
terminal of your TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the HDMI signal from the player appears on  
your TV screen.  
If you have set the remote control to operate your TV (See page 19), press the TV SOURCE  
button on the remote control and select HDMI as the external source of the TV.  
HDMI cable  
(not included)  
NOTE  
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.  
If the player is connected to your TV in HDMI 720p, 1080i, 1080p output mode, you must use a High speed(category2)  
HDMI cable.  
HDMI outputs only a pure digital signal to the TV.  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.  
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output  
resolution will be automatically set to the highest supported by the TV.  
ꢀ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 2 : Connecting to a TV with DVI Cable - Best Quality  
(Recommended)  
1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the player to the DVI IN  
terminal of your TV.  
2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player  
to the AUDIO IN (red and white) terminals of your TV.  
3. Turn on the player and TV.  
4. Press the input selector on your TV remote control until the HDMI-DVI signal from the player appears  
on your TV screen.  
If you have set the remote control to operate your TV (See page 19), press the TV SOURCE  
button on the remote control and select HDMI-DVI as the external source of the TV.  
HDMI-DVI cable  
(not included)  
Audio cable  
TV monitor  
Red  
White  
NOTE  
HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content  
Protection), random noise appears on the screen.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.  
When you connect the player to the TV using the HDMI-DVI cable for the first time or to a new TV, the HDMI output  
resolution will be automatically set to the highest supported by the TV.  
English  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Case 3 : Connecting to a TV (Component) - Better Quality  
-
-
Connecting to your TV using Component video cables.  
You will enjoy high quality images with accurate color reproduction. Component video separates the  
picture element into black and white(Y), blue(PB) and red(PR) signals to present clear and clean images.  
(Audio signals are delivered through the audio output.)  
1. Using Component video cables, connect the COMPONENT OUT terminals on the rear of the player  
2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player  
to the COMPONENT IN terminals of your TV.  
to the AUDIO IN (red and white) terminals of your TV.  
3. Turn on the player and TV.  
4. Press the input selector on your TV remote control until the “COMPONENT” signal from the player  
appears on the TV screen.  
If you have set the remote control to operate your TV (See page 19), press the TV SOURCE  
button on the remote control and select COMPONENT as the external source of the TV.  
Component cable  
(not included)  
Audio cable  
Red  
White Red  
Blue Green  
NOTE  
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”  
instead of “PB, PR, Y”. The number and position of terminals may vary depending on the TV set.  
Please refer to the user manual of your TV.  
You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p, 480i, depending on  
the disc type. (See pages 30~31)  
The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.  
The resolution may also be different depending on the disc. (See pages 30~31)  
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or  
720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.  
The resolution is actually 480i.  
ꢀꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 4 : Connecting to a TV (Video) - Good Quality  
1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)  
terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of  
your TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears  
on the TV screen.  
If you have set the remote control to operate your TV (See page 19), press the TV SOURCE  
button on the remote control and select VIDEO as the external source of the TV.  
Audio/Video cable  
Red  
White Yellow  
NOTE  
Noise may be generated if the audio cable is placed too close to the power cable.  
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 24~25)  
The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.  
If there is only one audio input terminal on the TV, connect it to the AUDIO OUT(right/white) terminal of the player.  
CAUTION  
!
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection  
systems and the picture will be distorted on the television.  
English  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to an Audio System  
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause  
damage to the speakers and your ears.  
Please set the audio in the menu screen according to the Amplifier. (See pages 32~34)  
The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual  
of your Amplifier.  
Case 1 : Connecting to an Audio System (HDMI Supported Amplifier)  
- Best Quality (Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN  
terminal of your Amplifier.  
2. Using an HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of  
your TV.  
3. Turn on the player, TV and Amplifier.  
4. Press the input select button of the Amplifier to select the external input in order to hear sound from  
the player. Refer to your Amplifier’s user manual to set the Amplifier’s audio input.  
HDMI cable  
(not included)  
HDMI cable  
(not included)  
ꢀꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Case 2 : Connecting to an Audio  
System (Dolby Digital, DTS  
Amplifier) - Better Quality  
Case 3 : Connecting to an Audio  
System (2 Channel Amplifier)  
- Good Quality  
1. Using an optical cable, connect the DIGITAL  
AUDIO OUT (OPTICAL) terminal on the  
rear of the player to the DIGITAL AUDIO IN  
(OPTICAL) terminal of your Amplifier.  
1. Using the audio cables, connect the AUDIO  
OUT (red and white) terminals on the rear of  
the player to the AUDIO IN (red and white)  
terminals of your Amplifier.  
2. Using the video signal cable(s), connect  
the HDMI, COMPONENT or VIDEO OUT  
terminals on the rear of the player to the  
HDMI, COMPONENT or VIDEO IN terminal  
of your TV. (See pages 20~23)  
2. Using the video signal cable(s), connect  
the HDMI, COMPONENT or VIDEO OUT  
terminals on the rear of the player to the  
HDMI, COMPONENT or VIDEO IN terminal  
of your TV. (See pages 20~23)  
3. Turn on the player, TV and Amplifier.  
3. Turn on the player, TV and Amplifier.  
4. Press the input select button of the Amplifier  
to select the external input in order to  
hear sound from the player. Refer to your  
Amplifier’s user manual to set the Amplifier’s  
audio input.  
4. Press the input select button of the Amplifier  
to select the external input in order to  
hear sound from the player. Refer to your  
Amplifier’s user manual to set the Amplifier’s  
audio input.  
Case 2 : Optical cable  
(not included)  
Case 3 : Audio cable  
Red  
White  
NOTE  
When following the case 2 connection, discs with PCM audio soundtracks will only be heard over the front two  
channels.  
English  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to the Network  
This player enables you to view network based services (See pages 52~57) such as Internet@TV and  
BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend  
using an AP (Access Point) or IP router for the connection. For more information on router connection,  
refer to the user manual of the router or contact the router manufacturer for technical assistance.  
Cable Network  
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal  
of your modem.  
2. Set the network options. (See pages 36~39)  
Router  
Broadband modem  
Or  
(with integrated router)  
Broadband modem  
Broadband  
service  
Broadband  
service  
Networking with PC for  
AllShare function  
(See pages 56~57)  
NOTE  
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s  
policy. For more information, contact your ISP (Internet Service Provider).  
For DSL users, please use a router to make a network connection.  
For the AllShare function, a PC must be connected in the network as shown in the figure.  
ꢀꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless Network  
You can connect to network with a Wireless IP sharer.  
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless  
LAN adapter to the Wireless LAN Adapter on the rear panel of the player.  
2. Set the network options. (See pages 36~39)  
Broadband  
service  
Wireless LAN Adapter  
(not included)  
Wireless IP sharer  
Networking with PC for  
AllShare function  
(See pages 56~57)  
NOTE  
).  
Use only the Samsung wireless LAN adapter with this player. (Model name: WIS09ABGN  
Do not use this adapter with any other third-party players.  
Please contact the retailer of this player for purchasing the wireless LAN adapter.  
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the  
wireless network.)  
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance,  
obstacles, interference by other radio devices, etc).  
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.  
When applying the security key for the AP (wireless IP sharer), only the following is supported.  
1) Authentication Mode : WEP, WPAPSK, WPA2PSK  
2) Encryption Type : WEP, AES  
For the AllShare function, a PC must be connected in the network as shown in the figure.  
English  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
5. Press the ◄► buttons to the select the  
desired Network Settings: Wired, Wireless or  
PBC (WPS), then press the ENTER button.  
(See pages 36~39)  
Before Starting (Initial Settings)  
1. Turn on your TV after connecting the player.  
(When the player is connected to TV for the  
first time, player will turn on automatically and  
the Initial Settings screen will be displayed.)  
The Network Test will start and Initial Settings  
will be completed.  
6. Press the OK button.  
Initial Settings I On-Screen Language  
Select a language for the on-screen displays.  
The home menu will be displayed. (For more  
information about home menu, please see  
page 29)  
English  
Français  
Deutsch  
Español  
Italiano  
Home Menu  
Nederlands  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
> Move " Select  
2. Press the ▲▼ buttons to select desired  
language, then press the ENTER button.  
3. Press the ENTER button to select Start  
No Disc  
a Change Device  
d View Devices " Enter  
button.  
Initial Settings  
NOTE  
TV Aspect and Network will be set.  
When the player is connected to TV for the first time,  
player will turn on automatically.  
Each setting may be changed later under "Settings"  
Do not confuse because this is not malfunction.  
The home menu will not be displayed if you do not  
configure the initial settings.  
Start  
If you press the BLUE(D) button during the network  
setup, you can access the home menu even if the  
network setup is not completed yet.  
a
Previous " Select  
When you return to home menu, the full screen  
4. Press the ▲▼ buttons to select the desired  
TV Aspect ratio, then press the ENTER  
button. (See page 30)  
mode will be cancelled automatically.  
If you want to display Initial Setting screen again  
in order to make changes, press the STOP (  
)
button on the front panel of the player for more than  
Initial Settings I Network  
5 seconds with no disc inserted.  
Network Setting is needed to use various Internet services.  
Use the HDMI cable to connect the player to an  
Anynet+(HDMI-CEC)-compliant Samsung TV.  
If the TV uses a language supported by the player,  
that language will be set to a preferred language  
automatically.  
Choose the primary method for connecting to network.  
Wired : Set the network connection using the Ethernet cable.  
Please make sure that the Ethernet cable is connected.  
Wireless  
Previous  
PBC (WPS)  
Wired  
However, the Anynet+(HDMI-CEC) feature should  
be set to On in both TV and the player.  
a
d
Skip < Move " Select  
ꢀꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the player is left in the stop mode more than 5  
minutes without being used, a screen saver will  
appear on your TV. If the player is left in the screen  
saver mode for more than 25 minutes, the power  
will automatically turn off.  
Selects the Settings.  
Displays buttons available.  
5
6
2. Press the ◄► buttons to select Settings,  
then press the ENTER button.  
3. Press the ▲▼ buttons to select the desired  
Setting the Menu  
submenu, then press the ENTER button.  
4. Press the ▲▼ buttons to select the desired  
DISC MENU  
MENU  
TITLE MENU  
POPUP  
item, then press the ENTER button.  
1
2
TOOLS  
INFO  
5. Press the EXIT button to exit the menu.  
NOTE  
3
4
When the player is connected to the network, select  
Internet@TV from the home menu.  
Download desired content from Samsung Apps.  
(See page 55)  
RETURN  
EXIT  
MENU Button : Press this to move to the home menu.  
The access step may differ depending on the  
1
selected menu.  
RETURN Button : Return to the previous menu.  
2
3
4
The OSD (On Screen Display) may change in this  
player after upgrading the software version.  
ENTER / DIRECTION Button :  
Move the cursor or select an item.  
Select the currently selected item.  
Confirm the setting.  
EXIT Button : Press this to exit the menu.  
1. Press the POWER button.  
The Home Menu will appear.  
Home Menu  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
2
3
4
1
5
6
No Disc  
a Change Device  
d View Devices " Enter  
Selects the Internet@TV.  
Selects the Videos.  
Selects the Music.  
1
2
3
4
Selects the Photos.  
English  
ꢀꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
If you select the 16:9 Normal, 4:3 Pillarbox may  
displayed.  
Display  
You can configure various display options such as  
In this case, you can’t see full screen by pressing  
the FULL SCREEN button on the remote control.  
tThVe TAV sApspeecctt, Resolution, etc.  
BD Wise (Samsung Players only)  
Depending on the type of television you have, you  
may want to adjust the screen setting.  
BD Wise is Samsung’s latest inter-connectivity  
feature.  
When you connect Samsung players with BD  
Wise to each other via HDMI, the optimum  
resolution will be set automatically.  
16:9 Normal  
Certain movies(4:3 source) will be  
displayed in 4:3 Pillarbox (black  
bars on sides of picture) if 16:9  
normal is selected.  
On : The original resolution of the BD/DVD disc  
will be output to the TV.  
Off : The output resolution will be fixed  
according to the Resolution previously set,  
regardless of the resolution of the disc.  
16:9 Wide  
NOTE  
You can view the full 16:9 picture  
on your widescreen TV.  
If you want to change the resolution in BD Wise, you  
must set BD Wise to Off in advance.  
If you set off the BD Wise, the resolution of the  
connected TV will be adjusted to its maximum  
resolution automatically.  
4:3 Letter Box  
If the player is connected to a device that does not  
support BD Wise, you can not use the BD Wise  
function.  
Select when you want to see the  
total 16:9 ratio screen a Blu-ray  
Disc/DVD supplies, even though  
you have a TV with a 4:3 ratio  
screen. Black bars will appear at  
the top and bottom of the screen.  
For proper operation of BD Wise, set the BD Wise  
menu of both the product and the TV to On.  
Resolution  
4:3 Pan-Scan  
Sets the output resolution of the Component and  
HDMI video signal.  
Select when you want to see the  
16:9 video supplied by the Blu-ray  
Disc/DVD without the black bars  
on top and bottom, even though  
you have a TV with a 4:3 ratio  
The number in 1080p, 1080i, 720p, 480p, 480i  
indicates the number of lines of video.  
The i and p indicate interlace and progressive  
scan, respectively.  
screen(extreme left and right portion  
of the movie picture will be cut off).  
Auto : It automatically checks and sets the  
optimal resolution.  
BD Wise : Automatically sets the optimal  
resolution when connected via HDMI to a TV  
with the BD Wise feature. (The BD Wise menu  
item appears only if BD Wise is set to On.)  
NOTE  
Depending on the disc type, some aspect ratios may  
not be available.  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
then the picture might appear to be distorted.  
1080p : Outputs 1080 lines of progressive  
video.  
1080i : Outputs 1080 lines of interlaced video.  
720p : Outputs 720 lines of progressive video.  
480p : Outputs 480 lines of progressive video.  
480i : Outputs 480 lines of interlaced video.  
If you select the 4:3 Pan-Scan or 4:3 Letter Box, you  
can’t see full screen by pressing the FULL SCREEN  
button on the remote control.  
ꢁ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resolution according to the output mode  
Blu-ray Disc playback  
HDMI / connected  
HDMI / not connected  
Output  
Setup  
HDMI Mode  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
Optimal Resolution  
1080p@60F  
480i  
480i  
-
-
-
-
1080p, Movie Frame(24Fs) off  
1080p/1080i,  
1080p@24F  
480i  
-
-
Movie Frame(24Fs) on  
1080i, Movie Frame(24Fs) off  
1080i  
720p  
480p  
-
480i  
480i  
480i  
-
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
480i  
DVD playback  
HDMI / connected  
HDMI / not connected  
Output  
Setup  
HDMI Mode  
Optimal Resolution  
1080p@60F  
1080i  
Component/VIDEO Mode  
Component Mode  
VIDEO Mode  
Auto  
1080p  
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
480i  
-
-
-
-
-
480p  
480p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
480p  
-
NOTE  
If the screen is blank, press and hold the STOP (  
)
button on the front of the player for more than 5  
If the connected TV does not support Movie Frame or  
the selected resolution, the message “If no pictures  
are shown after the selection, please wait for 15  
seconds. And then, the resolution will be reverted to  
the previous value automatically. Would you like to  
make a selection?” will be displayed.  
seconds (no disc inserted). All settings are restored to  
the factory default. Follow the steps on the previous  
page to access each mode and select the Display  
Setup that your TV will support.  
When the factory default settings are restored, all  
If you select Yes and the resolution is not supported,  
the TV’s screen will be blank. Please wait for 15  
seconds and the resolution will be reverted to the  
previous value automatically.  
the user data stored in the BD data will be deleted.  
The Blu-ray Disc must have the 24 frame feature in  
order to use the Movie Frame (24Fs) mode.  
If both HDMI and Component jacks are connected  
and you are currently viewing component output,  
there is a difference between resolution table and  
actual resolution depending on your TV.  
English  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
HDMI Format  
HDMI Deep Color  
You can optimize the color setting from the HDMI  
Set to output the picture from the HDMI OUT jack  
with Deep Color or not. Deep Color allows more  
accurate color reproduction with deeper color  
depth.  
output.  
Select a connected device Type.  
TV : Select if connected to a TV via HDMI.  
HDMI.  
Auto : The picture will be output with Deep  
Color to the connected TV which supports  
HDMI Deep Color.  
Monitor : Select if connected to a Monitor via  
Off : The picture will be output without Deep  
Movie Frame (24Fs)  
Color.  
Setting the Movie Frame (24Fs) feature to On  
allows you to adjust the player’s HDMI output to  
24 frames per second for improved picture quality.  
You can enjoy the Movie Frame (24Fs) feature only  
on a TV supporting this frame rate. This menu can  
only be selected in 1080i or 1080p HDMI output  
resolution modes.  
Audio  
Digital Output  
Set Digital Output depending on the connected  
receiver. (For more details, please refer to the  
digital output selection on the next page)  
On : Movie Frame (24Fs) functions will work.  
Off : Movie Frame (24Fs) functions will not work.  
PCM  
NOTE  
Bitstream(Re-encode)  
If your TV does not support Movie Frame (24Fs)  
function, the pop-up message will be displayed.  
Bitstream(Audiophile)  
NOTE  
Be sure to select the correct Digital Output or you  
will hear no sound or a loud noise.  
Progressive Mode  
Set to improve picture quality when viewing DVDs.  
If the HDMI device (Receiver, TV) is not compatible  
with compressed formats (Dolby digital, DTS), the  
audio signal outputs as PCM.  
Auto : Select this to have the player  
automatically set the best picture for the DVD  
you’re watching.  
Regular DVDs do not have BONUSVIEW audio and  
Video : Select for the best picture quality from  
Navigation Sound Effects.  
concert or TV show DVDs.  
Some Blu-ray Discs do not have BONUSVIEW audio  
and Navigation Sound Effects.  
Still Mode  
This Digital Output setup does not effect the analog  
(L/R) audio or HDMI audio output to your TV.  
It effects the optical and HDMI audio output when  
connected to a receiver.  
Set the type of picture shown when you pause  
DVD playback.  
Auto : Automatically set the best still picture  
If you play MPEG audio soundtracks, audio signal  
outputs PCM regardless of Digital Output Selections  
(PCM or Bitstream).  
depending on the content.  
Frame : Select when pausing a scene with a  
little action.  
Field : Select when pausing a scene with a lot  
of action.  
ꢁꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Output Selection  
Bitstream  
Bitstream  
Setup  
PCM  
(Re-encode)  
(Audiophile)  
Connection  
HDMI Receiver Optical  
HDMI Receiver or Optical HDMI Receiver  
Optical  
PCM  
Up to 7.1ch  
Up to 5.1ch  
PCM 2ch  
PCM 2ch  
DTS re-encoded  
DTS re-encoded  
PCM  
PCM 2ch  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Dolby Digital  
Up to 7.1ch  
PCM 2ch  
DTS re-encoded  
Dolby Digital  
Audio Stream  
on Blu-ray  
Disc  
Plus  
Plus  
Dolby TrueHD Up to 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
DTS re-encoded  
PCM 2ch  
Dolby Digital  
DTS  
Dolby TrueHD Dolby Digital  
DTS  
Up to 6.1ch  
DTS  
DTS  
DTS  
DTS  
DTS-HD HRA Up to 7.1ch  
DTS-HD HRA  
DTS-HD MA  
PCM 2ch  
Dolby Digital  
DTS  
DTS-HD MA  
PCM  
Dolby Digital  
DTS  
Up to 7.1ch  
PCM 2ch  
Up to 5.1ch  
Up to 6.1ch  
PCM 2ch  
Dolby Digital  
DTS  
Audio Stream  
on DVD  
Decodes main feature audio Outputs only main feature audio  
and BONUSVIEW audio stream stream so that your AV receiver  
together into PCM audio and can decode the audio bitstream.  
add Navigation Sound Effects, You will not hear BONUSVIEW  
then re-encodes the PCM audio audio and Navigation Sound  
Decodes main feature audio  
and BONUSVIEW audio  
stream together into PCM  
audio and add Navigation  
Sound Effects.  
Definition for  
Blu-ray Disc  
Any  
into DTS bitstream.  
Effects.  
Blu-ray Discs may include three audio streams.  
PCM Downsampling  
-
-
-
Main Feature Audio : The audio soundtrack of  
the main feature.  
Set whether to downsample 96kHz signals.  
On : Select this when the Amplifier connected  
to the player is not 96kHz compatible. 96kHz  
signals will be down converted to 48kHz.  
BONUSVIEW audio : Additional soundtrack  
such as director or actor's commentary.  
Navigation Sound Effects : When you choose  
some menu navigation, Navigation Sound  
Effects may sounds. Navigation Sound Effects  
is different on each Blu-ray Disc.  
Off : Select this when the Amplifier connected  
to the player is 96kHz compatible.  
NOTE  
Even when PCM Downsampling is set to Off, some  
discs will only output downsampled audio through  
the optical digital outputs.  
English  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Cinema : Select this if you want to play  
HDMI  
2-channel movie sound over multi-channels.  
If your TV is not compatible with compressed  
multi-channel formats (Dolby Digital, DTS), the  
player may output PCM 2ch downmixed audio  
even though you set Bitstream(either Re-encode  
or Audiophile) on your setup menu.  
Music : Select this if you want to play 2-channel  
music sound over multi-channels.  
NOTE  
If you are using HDMI receiver, this option is  
If your TV is not compatible with PCM sampling  
rates over 48kHz, the player may output 48kHz  
downsampled PCM audio even though you set  
PCM Downsampling to Off.  
available when you set Digital Output setup as PCM.  
System  
Dynamic Range Control  
Initial Settings  
You can listen at low volumes but still hear dialog  
By using Initial Settings, you can set language, TV  
aspect and Network Settings, etc.  
clearly.  
This is only active when a Dolby Digital signal is  
detected.  
For more information on the settings, refer to the  
corresponding section in this user manual.  
(See pages 28~42)  
Auto : The Dynamic Range Control will be set  
automatically based on the information provided  
by the Dolby TrueHD Soundtrack.  
Internet@TV Screen Size  
On : When Movie soundtracks are played at low  
volume or from smaller speakers, the system  
can apply appropriate compression to make  
low-level content more intelligible and prevent  
dramatic passages from getting too loud.  
Set the Internet@TV Screen to the optimal size.  
Size 1 : Display smaller application icons, you  
may see some black on sides of screen.  
Size 2 : Display normal application icons, image  
Off : You can enjoy the movie with the standard  
may be too large for your TV screen.  
Dynamic Range.  
Size 3 : Display larger application icons, image  
may be too large for your TV screen.  
Downmixing Mode  
Anynet+(HDMI-CEC)  
Set whether to downmix the multi-channel audio  
into fewer channels.  
Anynet+ is a convenient function that offers linked  
operations with other Samsung players with the  
Anynet+ feature.  
Normal Stereo : Downmixes the multi-channel  
audio into two channel stereo. Choose when  
connected to equipment that does not support  
virtual surround functions such as Dolby Pro  
Logic.  
To operate this function, connect this player to a  
Samsung TV with an HDMI cable.  
You can operate this player using a Samsung TV  
remote control and start disc playback simply  
Surround Compatible : Downmixes multi-  
channel audio into surround compatible stereo.  
Choose when connected to equipment that  
supports virtual surround functions such as  
Dolby Pro Logic.  
by pressing the PLAY (  
) button on the TV’s  
remote control.  
For more information, please see the TV user  
manual.  
On : Anynet+ functions will work.  
DTS Neo:6  
Off : Anynet+ functions will not work.  
You can enjoy multi-channel sound from a simple  
2-channel audio source.  
Off : Outputs a 2-channel audio signal through  
the front speakers only.  
ꢁꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Clock  
This function is not available if the HDMI cable does  
Set time-related functions.  
not support CEC.  
If your Samsung TV has an n logo, then it  
Settings  
supports the Anynet+ function.  
Display  
Clock  
Depending on your TV, certain HDMI output  
Audio  
Clock Mode  
Clock Set  
Time Zone  
DST  
: Auto  
\
resolutions may not work.  
System  
Network  
Language  
Security  
General  
Support  
Please refer to the user manual of your TV.  
: GMT + 0:00  
: Off  
BD Data Management  
> Move " Enter ' Return  
Enables you to manage the downloaded contents  
from a Blu-ray disc that supports the BD-LIVE  
service.  
Clock Mode : You can set it to Auto or  
Manual.  
You can check the device information including  
the storage size, delete the BD data or change the  
Flash memory device.  
If you select Manual, the Clock Set menu will  
be activated while DST will be deactivated.  
Clock Set : You can specify the current time  
Settings  
and date manually.  
Display  
BD Data Management  
Time Zone : You can specify the time zone that  
Audio  
Current Device  
: Not Selected  
: 0MB  
is applicable to your area.  
System  
Network  
Language  
Security  
General  
Support  
Total Size  
Available Size  
Delete BD Data  
Change Device  
: 0MB  
DST : You can set DST (Daylight Saving Time)  
on or off.  
: Not Selected  
\
" Select ' Return  
DivX(R) Registration  
View DivX(R) VOD Registration Code to purchase  
and play DivX(R) VOD content.  
Description of Device(Storage) Information on  
the Player  
Settings  
Total Size : Total size of the Device(Storage).  
Display  
Initial Settings  
Available Size : Available size of the Device  
Audio  
(Storage).  
System  
Network  
Language  
Security  
General  
Support  
DivX(R) Video On Demand  
Your registration code is : XXXXXXXXXX  
NOTE  
In the external memory mode, disc playback will  
be stopped if you disconnect the USB device in the  
middle of the playback.  
OK  
Only those USB devices formatted in FAT file system  
(DOS 8.3 volume label) are supported, and it is  
recommended to use USB devices that support USB  
2.0 protocol, 4 MB/sec or faster read/write speed.  
NOTE  
This option is not activated if you select OK.  
To activate this option, please activate the DivX(R)  
Deactivation.  
The Resume Play function may not work after  
formatting the storage device.  
The total size of BD Data Management may differ,  
depending on the conditions.  
English  
ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Wired Network  
DivX(R) Deactivation  
Select this to get a new registration code.  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Setting, and then  
press the ENTER button.  
Settings  
The Internet Protocol Setup screen appears.  
Display  
Initial Settings  
Audio  
2. Press the ► button, then select Auto or  
System  
Network  
Language  
Security  
General  
Support  
Manual, and then press the ENTER button.  
Do you want to deactivate your device?  
Setting Up a Wired Connection - Auto  
Yes  
No  
1. If you selected Auto, the Network Function  
acquires and fills in the values for IP Address,  
Subnet Mask, etc., automatically.  
NOTE  
This process can take up to five minutes.  
NOTE  
This function can be operated when DivX(R)  
Registration function is deactivated.  
Settings  
Network Setting  
Displa
Internet Protocol Setup : Auto  
\
Audio  
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Network  
Syste
Netwo
Langu
To begin setting up the network connection for  
DNS  
: Auto  
Secur
Gener
Suppo
DNS Server  
:
0
0
0
0
your player, follow these steps:  
1. In the Home menu, press the ◄► buttons  
to select the Settings, and then press the  
ENTER button.  
> Move " Select ' Return  
2. Press the ▲▼ buttons to select Network, and  
2. After the Network Function has acquired the  
network values, press the RETURN button.  
Then, run a Network Test to ensure the player  
has connected to your network (See page 39).  
then press the ENTER button.  
3. Press the ▲▼ buttons to select Network  
Settings, and then press the ENTER button.  
4. Press the ▲▼ buttons to select Network  
3. If the Network Function does not acquire the  
network values or you selected Manual, go to  
the directions for Manual Setup.  
Type, and then press the ENTER button.  
5. Press the ▲▼ buttons to select Wired or  
Wireless, and then press the ENTER button.  
6. Go to the next section.  
Network Settings  
Please contact your ISP to find out if your IP  
address is static or dynamic. If it is dynamic, we  
recommend using the Auto setting. This is the  
easiest and will work in the majority of cases. If it is  
static, you must use the manual set up procedure.  
Directions for wired networks are below. Directions  
for wireless networks are after the directions for  
wired networks.  
ꢁꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up a Wired Connection - Manual  
9. Press the RETURN button on your remote.  
If the Auto Setting does not work, you’ll need to  
set the Network Setting values manually.  
10. Run a Network Test to ensure the player has  
connected to your network (See page 39).  
To get the Network setting values from most  
Wireless Network  
Windows computers, follow these steps:  
1. Right click the Network icon on the bottom  
You can setup the wireless network three ways:  
right of the screen.  
Using PBC (WPS)  
2. In the pop-up menu, click Status.  
Using the Auto Network Search function.  
Manually.  
3. On the dialog that appears, click the Support  
tab.  
Each method is described below.  
4. On the Support tab, click the Details button.  
Setting Up the Wireless Network Connection  
The Network settings are displayed.  
- PBC (WPS)  
To enter the Network settings into your player,  
The easiest way to set up the wireless network  
connection is using the PBC (WPS) function.  
If your wireless router has a PBC (WPS) button,  
follow these steps:  
follow these steps:  
1. On the Internet Protocol Setup screen, press  
the ENTER button.  
2. Press the ▲▼ buttons to select Manual, and  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Setting, and then  
press the ENTER button.  
then press the ENTER button.  
3. Press the ▼ button to go to the first entry field  
The Internet Protocol Setup screen appears.  
(IP Address).  
2. Press the RED(A) button on the remote  
control.  
Settings  
Network Setting  
Displa
3. Press the PBC (WPS) button on your router  
within two minutes. Your player displays the  
Network Selection Screen, and automatically  
acquires all the network setting values it  
needs and connects to your network. When  
it is done, it displays an OK button. Press the  
ENTER button on your remote.  
Internet Protocol Setup : Manual  
\
Audio  
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
Syste
Netwo
Langu
255 255 255  
0
0
0
0
0
DNS  
: Manual  
Secur
Gener
Suppo
DNS Server  
:
0
0
> Move " Select ' Return  
4. After the network connection is set up, press  
the RETURN button to exit the Network  
Setting screen.  
4. Use the number buttons on your remote to  
enter numbers.  
5. When done with each field, use the ► button  
to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
6. Enter the IP Address, Subnet Mask, and  
Gateway values.  
7. Press the ▼ button to go to DNS.  
8. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
English  
ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Setting Up the Wireless Network Connection  
- Auto Network Search  
6. If the PIN/Security pop-up appears, go to  
Step 7. If the Network Connecting Screen  
appears, go to Step 11.  
Most wireless networks have an optional security  
system that requires devices that access the  
network to transmit an encrypted security code  
called an Access or Security Key. The Security  
Key is based on a Pass Phrase, typically a word  
or a series of letters and numbers of a specified  
length you were asked to enter when you set up  
security for your wireless network. If you use this  
method of setting up the network connection, and  
have a Security Key for your wireless network,  
you will have to enter the Pass Phrase during the  
setup process.  
7. Press the ▲▼ buttons to select PIN or  
Security.  
For most home networks, you would select  
Security (for Security Key).  
8. On the Security screen, enter your network’s  
Pass Phrase.  
NOTE  
You should be able to find the Pass Phrase on one of  
the set up screens you used to set up your router or  
modem.  
Setting Up the Network Connection  
.
Settings  
To set up the wireless connection using Auto  
Security Key  
Display  
Network Search, follow these steps:  
Security Key  
(0)  
Audio  
a
b
c
5
8
0
System  
Network  
Language  
Security  
General  
Support  
.,@  
abc  
jkl  
def  
mno  
1. In the Network Settings menu, press the ▲▼  
buttons to select Network Setting, and then  
press the ENTER button.  
1
4
7
2
3
6
9
ghi  
pqrs  
tuv  
wxyz  
Delete  
Done  
a/A/1/  
a
Clear All  
b
Space  
c
The Internet Protocol Setup screen appears.  
(
/)  
Cursor " Select ' Return  
2. Press the ▲▼ buttons to select the Internet  
Protocol Setup, and then press the ENTER  
button.  
3. Press the ▲▼ buttons to select Auto or  
9. To enter the Pass Phrase, follow these  
Manual, and then press the ENTER button.  
general directions:  
Press the number keys on your remote to  
Settings  
enter numbers.  
Network Setting  
Displa
Access Point Selection : Not Selected  
Internet Protocol Setup : Auto  
\
Use the arrow keys on your remote to move  
from button to button on the Security Key  
screen.  
Audio  
System  
Netwo
Langu
Securi
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
To enter letters, move to the button labeled  
DNS  
: Auto  
Gener
Suppo
a/A/1/ , and then press the ENTER button.  
DNS Server  
:
0
0
0
0
Each time you press the ENTER button,  
a
PBC (WPS) > Move " Select ' Return  
you change the kind of characters you can  
enter (a/A/1/ ).  
To enter a letter, press the number button  
that corresponds to the letter. Pressing the  
button repeatedly changes the letter.  
4. If you selected Auto, press the ▲ button to  
go to Access Point Selection, and then  
press the ENTER button.  
To delete the last letter or number you  
entered, move to the Delete button, and  
then press the ENTER button.  
The Network function searches for available  
wireless networks.  
When done, it displays a list of the available  
To clear all entered letters and numbers,  
move to the Clear key, and then press the  
ENTER button. You can also just press the  
RED(A) button on your remote.  
networks.  
5. In the list of networks, press the ▲▼ buttons  
to select a network, and then press the  
ENTER button.  
ꢁꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. When done, press the YELLOW(C) button  
on your remote, or move to the Done button,  
and then press the ENTER button.  
4. Use the number buttons to enter numbers.  
5. When done with each field, use the ► button  
to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
The Network Connecting screen appears.  
11. Wait until the connection confirmation  
message is displayed, and then press the  
ENTER button. The Network Settings screen  
reappears.  
6. Enter the IP Address, Subnet Mask, and  
Gateway values.  
7. Press the ▼ to go to DNS.  
12. To test the connection, press the ▼ button  
to select Network Test, and then press the  
ENTER button.  
8. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
9. When done, press the ▲ button to return to  
Access Point Selection. Select the network,  
and then press the ENTER button.  
Setting Up the Wireless Network Connection  
- Manual  
If the Auto Setting does not work, you need to  
enter the Network settng values manually.  
10. Go to Step 6 in the Automatic Wireless  
procedure above, and follow the directions  
from that point on.  
To get the Network setting values from most  
Windows computers, follow these steps:  
Network Test  
1. Right click the Network icon on the bottom  
right of the screen.  
Use this menu to connect the wired network  
or check whether your network connection is  
working or not.  
2. In the pop-up menu, click Status.  
3. On the dialog that appears, click the Support  
tab.  
Network Status  
4. On the Support tab, click the Details button.  
The Network settings are displayed.  
Check whether a connection to the network and  
the Internet have been established.  
To Enter the Network settings into your player,  
follow these steps:  
1. On the Internet Protocol Setup screen, press  
the ENTER button.  
2. Press the ▲▼ buttons to select Manual, and  
then press the ENTER button.  
3. Press the ▼ button to go to the first entry field  
(IP Address).  
Settings  
Network Setting  
Displa
Access Point Selection : Not Selected  
Internet Protocol Setup : Manual  
\
Audio  
Syste
Netwo
Langu
Secur
IP Address  
Subnet Mask  
Gateway  
:
:
:
0
0
0
0
0
0
255 255 255  
0
0
0
0
0
DNS  
: Manual  
Gener
Suppo
DNS Server  
:
0
0
a
PBC (WPS) > Move " Select ' Return  
English  
ꢁꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
BD-LIVE Internet Connection  
Parental Rating  
Set to allow internet connection when BD-LIVE  
This function works in conjunction with Blu-ray  
Disc/DVDs that have been assigned a rating,  
which helps you control the types of Blu-ray Disc/  
DVDs that your family watches.  
service is used.  
Allow (All) : The Internet connection will be  
allowed for all BD-LIVE contents.  
Select the rating level you want to set.  
Allow (Valid Only) : The Internet connection will  
be allowed only for BD-LIVE contents containing  
a valid certificate.  
A larger number indicates that the program is  
intended for adult use only. For example, if you  
select up to Level 6, discs that contain Level 7, 8  
will not play.  
Prohibit : No Internet connection will be allowed  
for any BD-LIVE content.  
NOTE  
Settings  
What is a valid certificate?  
Display  
Parental Rating  
Off  
When the player uses BD-LIVE to send the disc data  
and a request to the server to certify the disc, the  
server uses the transferred data to check if the disc is  
valid and sends the certificate back to the player.  
Audio  
Change Password  
8(Adults)  
System  
Network  
Language  
Security  
General  
Support  
7
6
5
4
The Internet connection may be restricted while you  
are using BD-LIVE contents.  
|
Language  
Change Password  
You can select the language you prefer for home  
menu, disc menu, etc.  
Change the 4-digit password used to access  
security functions.  
On-Screen Menu : Select the language for the  
on-screen displays.  
Disc Menu : Select the language for the disc  
If you forgot your password  
menu displays.  
Audio : Select the language for disc audio.  
1. Remove the disc.  
Subtitle : Select the language for disc subtitles.  
2. Press and hold the STOP (  
) button on the  
NOTE  
front panel for 5 seconds or more.  
The selected language will only appear if it is  
supported on the disc.  
All settings will revert to the factory settings.  
NOTE  
When the factory default settings are restored, all  
the user data stored in the BD data will be deleted.  
Security  
When you operate this menu for the first time,  
password setup screen will be displayed.  
Enter the desired 4-digit password using the  
number buttons.  
ꢂ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General  
Support  
Background  
Software Upgrade  
Change the background theme of the menu screen.  
This menu allows you to upgrade software  
for performance improvements or additional  
services. You can check the current software  
version, upgrade using the internet and set the  
Auto upgrade notification. If the player is properly  
connected to the network by cable or wirelessly,  
the player will automatically connect to Samsung’s  
website each time it is turned on and download  
update files if any valid upgrade exists.  
Settings  
Background  
Dis
A
Skin 1  
Skin 2  
Skin 3  
Skin 4  
Skin 5  
S
N
La
S
G
S
' Return  
Settings  
Display  
Software Upgrade  
Software Upgrade  
Audio  
System  
Network  
Language  
Security  
General  
Support  
Current Version  
: XXX-XXXXXXXXX  
Energy Saving  
By Internet  
\
Auto Upgrade Notification : On  
You can reduce power consumption by setting  
the front panel to turn off automatically when there  
is no operation for 5 seconds.  
" Select ' Return  
On : The front panel will automatically turn off  
Off : Energy Saving function is not used.  
when there is no operation for 5 seconds.  
1. To select By Internet, press the ENTER  
button.  
Front Display  
A popup message will appear if an update is  
available.  
Change the brightness of the front panel.  
2. If you select Yes, the player will turn off  
automatically before restarting.  
(Never turn it on manually.)  
Auto : Dim during playback.  
Dim : Dim the display window.  
Bright : Brighten the display window.  
3. The update progress popup will appear.  
When the update is completed, the player will  
turn back off automatically.  
Power On/Off Sound  
4. Press the POWER button to turn on the  
Play a melody when the player is turned on and off.  
player.  
On : Turn Power Sound On.  
Off : Turn Power Sound Off.  
NOTE  
The Update will be completed when the player turns  
off after restarting. Press the POWER button to turn  
on the updated player for your use.  
Never turn off or on the player manually during the  
update process.  
Samsung Electronics shall take no legal responsibility  
for player malfunction caused an unstable internet  
connection or consumer negligence during software  
upgrade.  
English  
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
You can also update software in any of the two  
ways as follows: Software update is the same as  
in the By Internet menu.  
then download and store the latest software  
(RUF file) into a USB flash drive. Connect  
the USB flash drive to the USB port of the  
player (disc tray must be empty) to update the  
software, then follow the on-screen instructions.  
bluraysupport, download and write the latest  
software (RUF file) onto a disc. Insert and play  
the disc in the player to start the update, then  
follow the on-screen instructions.  
NOTE  
Software upgrades using the USB Host jack must be  
performed with no disc inside.  
If you want to cancel the upgrade in the process of  
downloading the upgrade data, press the ENTER  
button.  
When the system upgrade is done, check the  
software details in the software Upgrade menu.  
Do not turn off the player during the System  
Upgrade, as it may cause the player to not work  
properly.  
Software upgrades using the USB Host jack must be  
performed with a USB memory flash stick only.  
Contact Samsung  
Provide contact information for assistance with  
your player.  
ꢂꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Playing a Disc  
Using the Disc menu/Title menu/  
Popup menu  
Playback  
Using the Disc Menu  
1. Press the OPEN/CLOSE (  
) button to  
open the disc tray.  
hZ  
2. Place a disc gently into the tray with the disc’s  
1. During playback, press the DISC  
label facing up.  
MENU button on the remote control.  
3. Press the OPEN/CLOSE (  
) button to  
2. Press the ▲▼◄► buttons to make  
the desired selection, then press the  
ENTER button.  
close the disc tray.  
4. Press the PLAY (  
) button.  
NOTE  
Playback related buttons  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
PLAY (  
STOP (  
PAUSE (  
)
Starts playback.  
Stops playback.  
Using the Title Menu  
If pressing the button once : The  
stop position will be memorized.  
)
If pressing the button twice : The  
Z
stop position will be not memorized.  
1. During playback, press the TITLE  
)
Pauses playback.  
MENU button on the remote control.  
2. Press the ▲▼◄► buttons to make  
the desired selection, then press the  
ENTER button.  
NOTE  
For some discs, pressing the STOP (  
) button  
once may not memorize the resume position.  
NOTE  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
Disc Structure  
The contents of disc are usually divided as below.  
Playing the Title List  
Blu-ray Disc, DVD-VIDEO  
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
1. During playback, press the DISC  
Audio CD (CD-DA)  
MENU or TITLE MENU button.  
track 1  
track 2  
track 3  
track 4  
track 5  
file 3  
2. Press the ▲▼ buttons to select an  
entry you want to play from Title List,  
then press the ENTER button.  
MP3, WMA, DivX, MKV and MP4  
NOTE  
folder (group) 1  
folder (group) 2  
file 1  
file 2  
file 1  
file 2  
If your disc has the playlist, press the GREEN(B)  
button to go to the Playlist.  
English  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Using the Popup Menu  
Skipping Chapters  
h
h�Z  
)
During playback, press the SKIP (  
1. During playback, press the POPUP  
button.  
MENU button on the remote control.  
If you press the SKIP (  
) button, it moves to  
2. Press the ▲▼◄► buttons or ENTER  
the next chapter.  
button to select the desired menu.  
If you press the SKIP (  
) button, it moves to  
NOTE  
the beginning of the chapter. One more press  
makes it move to the beginning of the previous  
chapter.  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
Using the Search and Skip Functions  
Slow Motion Play/Step Motion Play  
During play, you can search quickly through a  
chapter or track, and use the skip function to  
jump to the next selection.  
Slow Motion Play  
h�Z�  
)
Searching for a Desired Scene  
h�Z�  
In pause mode, press the SEARCH (  
button.  
If you press the SEARCH (  
) button, the  
During playback, press the SEARCH (  
)
playback speed is reduced to  
button.  
*
1/8  
*
1/4  
*
1/2  
Each time you press the SEARCH (  
)
To return to normal speed playback, press the  
button, the playback speed will change as follows.  
PLAY (  
) button.  
NOTE  
BD-ROM,  
)
)
1   
)
)
2   
)
)
3   
BD-RE/-R,  
DVD-RW/-R,  
DVD+RW/+R,  
DVD-VIDEO  
No sound is heard during slow mode.  
4   
5   
6   
)
(
7
7
(
(
1   
(
(
2   
(
(
3   
4   
5   
6   
Step Motion Play  
)
(
1   
)
(
2   
)
(
3
DivX, MKV, MP4  
h�Z�  
) button.  
1   
2   
3
In pause mode, press the PAUSE (  
To return to normal speed playback, press the  
Each time the PAUSE (  
) button is pressed,  
PLAY (  
) button.  
a new frame will appear.  
To return to normal speed playback, press the  
NOTE  
PLAY (  
) button.  
No sound is heard during search mode.  
NOTE  
No sound is heard during step mode.  
ꢂꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press the ENTER button at the point where  
Repeat Playback  
you want repeat play to stop (B).  
5. To return to normal play, press the REPEAT  
Repeat the Title or Chapter  
button again.  
6. Press the ENTER button.  
h�Z�  
NOTE  
Repeat the disc title or chapter.  
If you set point (B) before 5 seconds has lapsed, the  
prohibition message will appear.  
Depending on the disc, the Repeat function may  
not be available.  
1. During playback, press the REPEAT  
Using the TOOLS button  
button on the remote control.  
During playback, you can operate disc  
menu by pressing the TOOLS button.  
2. Press the ▲▼ buttons to select Chapter or  
Title, then press the ENTER button.  
Tools Menu Screen  
Repeat  
Chapter  
>
Tools  
Title  
:
1/1  
4/21  
Chapter  
Playing Time  
Audio  
<
:
>
00:12:06  
:
:
:
1/7 ENG Multi CH  
3. To return to normal play, press the REPEAT  
Subtitle  
Angle  
1/6 ENG  
1/1  
button again.  
BONUSVIEW Video :  
BONUSVIEW Audio :  
Picture Setting  
Off  
4. Press the ▲▼ buttons to select Off, the press  
0/1 Off  
the ENTER button.  
< Change " Enter  
Repeat the Section  
NOTE  
h�Z�  
Depending on the disc, the Tools menu may differ.  
1. During playback, press the REPEAT  
button on the remote control.  
Moving to a Desired Scene Directly  
h�Z�  
2. Press the ▲▼ buttons to select Repeat A-B.  
1. During playback, press the TOOLS button.  
Repeat  
Repeat A-B : Off  
" Mark A  
>
2. Press the ▲▼ buttons to select Title, Chapter  
or Playing Time.  
3. Enter the desired Title, Chapter or Playing  
Time using the number buttons, then press  
the ENTER button.  
3. Press the ENTER button at the point where  
you want repeat play to start (A).  
English  
ꢂꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
NOTE  
Selecting the Audio Language  
h�Z�  
Depending on the Blu-ray Disc / DVD, you may be  
able to change the desired subtitle in the Disc Menu.  
Press the DISC MENU button.  
You can also operate this function by  
pressing the AUDIO button on the  
remote control.  
This function depends on what subtitles are encoded  
on the disc and may not be available on all Blu-ray  
Discs/DVDs.  
A Blu-ray Disc can contain up to 255 subtitle  
languages and a DVD up to 32.  
1. During playback, press the TOOLS button.  
Information about the main feature/BONUSVIEW  
mode will also be displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
2. Press the ▲▼ buttons to select Audio.  
3. Press the ◄► buttons to select the desired  
audio language.  
This function changes both the primary and  
NOTE  
secondary subtitles at the same time.  
The ◄► indicator will not be displayed on the  
screen if the BONUSVIEW section does not contain  
any BONUSVIEW audio settings.  
The total number of subtitles is the sum of the  
primary and secondary ones.  
If you press the SUBTITLE button on the remote  
Information about the main feature/BONUSVIEW  
mode will also be displayed if the Blu-ray Disc has a  
BONUSVIEW section.  
control, the subtitle bar will be displayed.  
Press the RETURN button to remove the subtitle bar.  
Use the ◄► button to switch between main feature  
and BONUSVIEW audio modes.  
Changing the Camera Angle  
This function depends on what audio languages are  
encoded on the disc and may not be available.  
hZ  
A Blu-ray Disc can contain up to 32 audio languages  
When a Blu-ray Disc/DVD contains multiple angles  
of a particular scene, you can use the ANGLE  
function.  
and a DVD up to 8.  
Some Blu-ray Discs may allow you to select either  
the multi-channel LPCM or Dolby digital audio  
soundtrack in English.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Angle.  
If you press the AUDIO button on the remote control,  
3. Press the ◄► buttons to select the desired  
Audio bar will be displayed.  
Angle.  
Press the RETURN button to remove the Audio bar.  
Selecting the Picture Setting  
Selecting the Subtitle Language  
hZ�  
You can also operate this function by  
pressing the SUBTITLE button on the  
remote control.  
h�Z�  
This function enables you to adjust video quality  
when you are connected to a TV via HDMI.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Picture Setting,  
then press the ENTER button.  
1. During playback, press the TOOLS button.  
3. Press the ◄► buttons to select the desired  
2. Press the ▲▼ buttons to select Subtitle.  
Picture Setting, then press the ENTER button.  
3. Press the ◄► buttons to select the desired  
subtitle language.  
ꢂꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic : Choose this setting to increase  
Listening to Music  
Sharpness.  
Normal : Choose this setting for most  
o  
viewing applications.  
Buttons on the Remote Control  
Movie : This is the best setting for watching  
movies.  
used for Music Playback  
User : The user can adjust the sharpness  
and noise reduction function respectively.  
@
Setting BONUSVIEW  
SUBTITLE  
AUDIO  
h
!
0
9
8
1
The BONUSVIEW feature allows you to view  
additional content (such as commentaries) in a  
small screen window while the movie is playing.  
This function is only available if the disc has the  
bonusview feature.  
2
3
TOOLS  
INFO  
EXIT  
You can also operate this function by  
pressing the BONUSVIEW button on  
the remote control.  
4
RETURN  
7
5
6
1. During playback, press the TOOLS button.  
INTERNET@ FULL SCREEN REPEAT  
2. Press the ▲▼ buttons to select BONUSVIEW  
Video or BONUSVIEW Audio.  
SEARCH buttons : Fast Play.  
3. Press the ◄► buttons to select the desired  
1
(Audio CD (CD-DA) only)  
bonusview.  
NOTE  
PAUSE button : Pauses playback.  
2
3
If you switch from BONUSVIEW Video, BONUSVIEW  
Audio will change automatically in accordance with  
BONUSVIEW Video.  
PLAY button : Plays the currently selected track.  
▲▼ buttons : Selects a track in the Music List or  
4
5
6
7
Playlist.  
Tools  
YELLOW(C) button : Select or deselect a track in  
BONUSVIEW Video <  
BONUSVIEW Audio :  
Picture Setting  
Off  
>
0/1 Off  
the music list.  
< Change " Enter  
REPEAT button : Selects the play mode in the  
Playlist.  
ENTER button : Plays and pauses the selected  
track.  
◄► buttons : Jump Play.  
8
9
(except for Audio CD (CD-DA))  
STOP button : Stops a track.  
SKIP button : During playback, moves to the next  
page in the Music List or moves to the next track in  
the Playlist.  
0
English  
ꢂꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
SKIP button : During playback, moves to the  
previous page in the Music List or moves to the  
previous track in the Playlist.  
Shows the current play time/total play time.  
Displays the current playback status  
Displays the repeated playback status.  
5
6
7
If you press this button after three seconds of  
!
playback in the Playlist, the current track will be  
replayed from the beginning. But, if you press this  
button within three seconds after playback starts in  
the Playlist, the previous track will be played.  
2. Press the ▲▼ buttons to select the track  
you want to play, and then press the ENTER  
button.  
NUMBER buttons : During the Playlist playback,  
will be played.  
press the desired track number. The selected track  
@
Repeat an Audio CD (CD-DA)/MP3  
1. During the Playlist playback, press the  
REPEAT button.  
2. Select the desired play mode by  
Playing an Audio CD (CD-DA)/MP3  
pressing the REPEAT button repeatedly.  
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
Tracks on a disc are  
into the disc tray.  
Audio CD  
played in the order in  
For an Audio CD (CD-DA), the first track will  
Off  
(CD-DA)/MP3 which they were recorded  
be played automatically.  
on the disc.  
For an MP3 disc, press the ◄► buttons  
to select Music, then press the ENTER  
button.  
Audio CD  
(
(
(
) Track  
) One  
) All  
Current track is repeated.  
(CD-DA)  
MP3  
Current track is repeated.  
All tracks are repeated.  
Audio CD (CD-DA)/MP3 Screen Elements  
Audio CD  
(CD-DA)/MP3  
1
2
3
The random option plays  
a disc’s track in random  
order.  
Audio CD  
Playlist  
1/6  
(
) Shuffle  
TRACK 001  
(CD-DA)/MP3  
TRACK 001  
TRACK 002  
TRACK 003  
TRACK 004  
TRACK 005  
TRACK 006  
05:57  
04:27  
04:07  
03:41  
03:17  
7
6
Playlist  
+
00:08 / 05:57  
1. Insert an Audio CD (CD-DA) or an MP3 Disc  
03:35  
Return  
into the disc tray.  
Pause  
Tools  
"
'
For an Audio CD (CD-DA), the first track will  
be played automatically.  
5
4
For an MP3 disc, press the ◄► buttons  
to select Music, then press the ENTER  
button.  
Displays the music information.  
Displays the playlist.  
1
2
3
4
2. To move to the Music List, press the STOP (  
)
or RETURN button.  
The Music List screen is displayed.  
Display the current track/total tracks.  
Displays buttons available.  
ꢂꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press the ▲▼◄► buttons to move desired  
track, then press the YELLOW(C) button to  
check desired tracks.  
Playing back a Picture  
G
Repeat this procedure to select additional  
tracks.  
Playing a JPEG Disc  
Music TRACK 003  
3 files selected 1/2 Page  
1. Insert a JPEG disc into the disc tray.  
TRACK 001  
TRACK 002  
2. Press the ◄► buttons to select the Photos,  
00:05:57  
00:04:27  
TRACK 003  
00:04:07  
TRACK 004  
and then press the ENTER button.  
00:03:41  
TRACK 005  
TRACK 006  
00:03:35  
3. Press the ▲▼◄► buttons to select the folder  
you want to play, and then press the ENTER  
button.  
00:03:17  
TRACK 007  
00:03:47  
TRACK 008  
00:03:49  
TRACK 009  
TRACK 010  
00:03:45  
00:03:53  
4. Press the ▲▼◄► buttons to select the photo  
you want to play, and then press the ENTER  
button.  
()  
c
Select  
Jump page ' Return  
CDDA  
The Slide Show starts automatically.  
4. If there is an undesired track in the playlist,  
press the YELLOW(C) button again.  
The selected track will be deleted.  
NOTE  
You can’t enlarge the subtitle and PG graphic in the  
full screen mode.  
5. Press the ENTER button to play the selected  
tracks.  
Selected tract will automatically play.  
Using the TOOLS button  
Playlist  
1/3  
TRACK 001  
TRACK 001  
TRACK 002  
TRACK 003  
During the slide show playback, you  
can use various function by pressing the  
TOOLS button.  
05:57  
04:27  
04:07  
+
00:08 / 05:57  
Tools  
Stop Slide Show  
Slide Show Speed :  
Background Music  
Zoom  
Normal  
Pause  
Tools  
Return  
"
'
Rotate  
Information  
6. To go to the Music List, press the STOP (  
)
>Move "Enter 'Return  
or RETURN button.  
7. To go to the Playlist, press the ENTER  
button.  
NOTE  
Stop Slide Show : Select this if you want to  
stop the slide show.  
You can create a playlist with up to 99 tracks on  
Audio CD (CD-DA).  
Slide Show Speed : Select this if you want to  
adjust the Slide Show speed.  
Background Music : Select this if you want to  
listen to music while viewing a picture.  
English  
ꢂꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Zoom : Select this if you want to enlarge the  
5. Press the ▲▼ buttons to select the USB,  
current picture. (Enlarged up to 4 times)  
then press the ENTER button.  
Rotate : Select this if you to rotate the picture.  
(This will rotate the picture either clockwise or  
counter clockwise.)  
6. Press the ◄► buttons to select the desired  
Videos, Music or Photos, then press the  
ENTER button.  
Information : Shows the picture information  
-1  
4 . Press the BLUE(D) button.  
including the name and size, etc.  
NOTE  
Please activate Internet@TV service  
to enjoy a variety of Internet Services.  
Before you can enable the background music  
function, the photo file should exist in the same  
storage media with the music file. However, the  
sound quality can be affected by the bit rate of the  
MP3 file, the size of the photo and the encoding  
method.  
USB  
USB  
d Home " Enter  
Playing back a USB Storage Device  
-1  
5 . Press the ◄► buttons to select the USB,  
then press the ENTER button.  
You can use the USB connection to play multimedia  
files (MP3, JPEG, DivX, etc) downloaded from the  
USB storage device.  
-1  
6 . Press the ▲▼ buttons to select the desired  
Videos, Music or Photos, then press the  
ENTER button.  
1. Move to the home menu.  
7. For playing back Video, Music or Photo files,  
2. In Stop mode, connect the USB storage  
device to the USB port on the front panel of  
the player.  
refer to pages 47~50.  
NOTE  
The message “Do you want to access the  
You must remove the USB storage device safely  
(by performing the “Safely Remove USB” function)  
in order to prevent a possible damage to the USB  
memory. Press the MENU button to move to the  
home menu, and select the YELLOW(C) button and  
press the ENTER button.  
device?” will be displayed.  
3. Press the ◄► button to select Yes, then  
press the ENTER button.  
4. Press the RED(A) button.  
When the Audio-CD (CD-DA), MP3 and JPEG files  
are in stop mode, you can’t see full screen by  
pressing the FULL SCREEN button on the remote  
control.  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
If you insert the disc when playing USB storage  
device, the device mode is changed to “DVD or CD”  
automatically.  
CD  
USB  
USB a Change Device  
c
Safely Remove USB  
d
View Devices " Enter  
ꢃ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on USB connection  
Supported devices: USB storage media, MP3 player, digital camera, USB card reader  
Does not support if a folder or file name is longer than 128 characters.  
A certain USB/digital camera device may not be compatible with the product.  
FAT16, FAT32 and NTFS file systems are supported.  
Connect directly to the product's USB port. Connecting through another cable may raise problems  
with USB compatibility.  
Inserting more than one memory device to a multi-card reader may not operate properly.  
PTP protocol is not supported.  
Do not disconnect USB device during a "loading" process.  
Bigger the image resolution, the longer the delay to displaying.  
DRM applied MP3 files downloaded from a commercial site are not played back.  
External HDD device is not supported.  
Supported file formats  
video File Support  
File Extension  
Container  
Video Codec  
Audio Codec  
Resolution  
MP3  
AC3  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
DivX 3.11/4.x/5.1/6.0  
XviD  
*.avi  
DTS  
AVI  
MP4v3  
WMA  
H.264 BP/MP/HP  
VC-1 AP  
PCM  
MP3  
AC3  
DTS  
DivX 5.1/6.0  
XviD  
*.mkv  
MKV  
H.264 BP/MP/HP  
VC-1 AP  
*.wmv  
*.mp4  
WMA  
AAC  
WMV (wmv9)  
MP4  
VC-1 SM  
MP4 (mp4v)  
H.264 BP/MP/HP  
MPEG1  
MP1, 2  
*.mpg  
AC3  
PS  
MPEG2  
*.mpeg  
DTS  
H.264 BP/MP/HP  
Music File Support  
File Extension  
*.mp3  
Container  
Audio Codec  
Support Range  
MP3  
-
MP3  
Compliant with WMA version 10  
*.wma  
WMA  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
* Bit rates - All bit-rates in the range 5kbps to 384kbps  
WMA  
English  
ꢃ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
You can enjoy various network services such as  
Internet@TV or BD-LIVE by connecting the player  
to the network system.  
4. When you have agreed on the service  
agreement, the Internet@TV service will start  
being updated. It takes several minutes.  
When the update is completed, you will see  
the Internet@TV menu screen.  
Check the following instructions before using  
any network service.  
Internet@TV at a Glance  
1. Connect the player to the network.  
(See pages 26~27)  
2. Configure the network settings.  
1
2
3
(See pages 36~39)  
Recommended  
My Applications  
Using Internet@Tv  
by Date 1/3  
Connect this player to the network to download  
various for a fee or free-of-charge applications.  
Internet@TV brings useful and entertaining content  
and services directly from the web to your player  
such as news, weather forecasts, stock market  
quotes, games, movies and music.  
Samsung Apps Settings  
a
Login  
b
Mark as Favourite  
d
Sort by ' Return  
6
5
4
You can also operate this function by  
pressing the INTERNET@ button on  
the remote control.  
Commercial : Displays Internet@TV Guide, product  
1
introduction and new application introduction.  
Recommended : Displays recommended contents  
2
3
Getting Started with Internet@TV  
managed by Samsung.  
1. Move to the home menu.  
My Applications : Displays your personal gallery  
which can be added and deleted by you.  
Navigation Help : Displays remote control buttons  
Please activate Intern  
e
t
@
T
V service  
to enjoy a variety of Internet Services.  
available.  
RED(A) : To log in to Internet@TV.  
4
GREEN(B) : To mark the application as a favorite.  
BLUE(D) : To sort the applications.  
Return : To return to the previous menu.  
Settings : You can set the system setup and create  
No Disc  
a Change Device  
d View Devices " Enter  
5
6
accounts, etc.  
Samsung Apps : You can download various  
2. Press the ◄► buttons to select Internet@TV  
chargeable or free-of-charge application services.  
and press the ENTER button.  
3. In the start screen of the Internet@TV service,  
you will see the service agreement screen.  
You should agree to the service terms and  
conditions before you can use the Internet@  
TV service.  
ꢃꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Press buttons on the remote to input the rest  
Using the Keypad  
of ‘Challenger Rd., Ridgefield Park NJ’.  
Through your remote, you can use the On-Screen  
Keypad in several Internet@TV applications to enter  
text.  
13. Press the ENTER button.  
14. The map and address appear on the screen.  
Pressing the SUBTITLE button on the remote while  
you are using the Screen Keypad lets you change  
the text fields to lower case, upper case, numbers  
and icons.  
NOTE  
Samsung Electronics shall take no legal responsibility  
for any interruption of the Internet@TV service  
caused by the service provider for any reasons.  
The Internet@TV service is to download and process  
data via the Internet so that you can enjoy the  
contents on the TV screen.  
1
4
7
2
5
8
0
abc  
jkl  
tuv  
3
6
9
def  
mno  
wxyz  
ghi  
pqrs  
If the Internet connection is unstable, the service  
may be delayed or interrupted.  
Input Mode  
Delete  
Furthermore, the player may be turned off automatically.  
If this is the case, check the Internet connection and  
try again.  
a
A
1
The application service may be provided in English  
only and the contents available may vary, depending  
on the area.  
For example, here is how to search an address in  
Google Maps:  
When using a application service, you can not  
1. Press the ENTER button on the remote at the  
operate FULL SCREEN button on the remote control.  
Google Maps icon at the Internet@TV.  
For more information about the Internet@TV service,  
visit the web site of the applicable service provider.  
2. Press GREEN(B) button to use the SEARCH  
function.  
The provided services are subject to change,  
3. Press the ◄► buttons to move to the “Search  
depending on the Internet@TV service provider.  
or address” window.  
The Internet@TV service contents may differ  
according to the firmware version.  
4. Press the ENTER button to use Search or  
address function.  
For-a-fee DivX contents with copy protection can  
5. For example, suppose that you want to input  
only be played using HDMI cable.  
‘105 Challenger Rd., Ridgefield Park NJ’.  
If you have connected your player to your TV using  
Component or video cables, the DivX video signal  
can not output or the popup message “Connect  
with a HDMI cable to play this file.” or “Cannot play  
current file.” will be displayed.  
6. Press the SUBTITLE button on the remote  
twice to change the input mode from lower  
case to numbers.  
7. Press ‘1’, ‘0’, ‘5’.  
8. Press the YELLOW(C) button on the remote  
to input a blank space.  
9. Press the SUBTITLE button on the remote  
3 times to change the input mode from  
numbers to upper case.  
10. Press ‘2’ button on the remote 3 times to  
input C.  
11. Press the SUBTITLE button on the remote 3  
times to change the input mode from upper  
case to lower case.  
English  
ꢃꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Account Login  
System Setup  
For a more enjoyable application experience,  
Reset  
register and log in to your account.  
To do this, you must create an account first.  
(For instructions on creating an account, refer to  
Internet@TV ID on this page)  
Resets Internet@TV settings to factory default  
settings.  
1. Press the ▲▼◄► buttons to select the  
desired application and press the RED(A)  
button.  
NOTE  
If you forgot your password, press the STOP (  
)
button on the front panel of the player for more than  
5 seconds with no disc inserted.  
Recommended  
Login  
Internet@TV ID  
by Date 1/3  
Use this menu to create or delete an account and  
enter or delete account information.  
User account :  
aaa  
Password :  
You can control your account including contents  
site’s account information.  
a
Create [0~9] Enter PIN ' Cancel  
Samsung Apps Settings  
This account is only for Internet@TV.  
a
Login  
b
Mark as Favourite  
d
Sort by ' Return  
Create  
Create an account and link it with desired service  
applications.  
2. Enter the user account and password.  
Settings  
NOTE  
Create IDs and configure Internet@TV settings  
from this screen.  
The account name must be at least 1 character in  
length but no more than 8.  
You can register up to 10 User Account Names.  
Settings  
Manager  
. System setup  
. Internet@TV ID  
. Service Manager  
. Properties  
Change the Service Lock password  
Reset  
Service Site : Register login information for  
service sites.  
Change Password : Change account  
password.  
Delete : Delete the account.  
' Return  
ꢃꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the color buttons with the Samsung  
Apps  
Service Manager  
Delete and lock applications installed to Internet@  
TV.  
RED(A) (Login) : To log in to the internet  
service.  
GREEN(B) (Thumbnail View) : To change the  
Lock  
view mode.  
Lock the application. Accessing a locked  
application requires the password.  
BLUE(D) (Sort by) : To sort the applications by  
Featured, Most Downloaded, Most Recent or  
Name.  
Delete  
Delete the application.  
Internet@TV Services Available  
YouTube/Pandora/Netflix/Blockbuster/USA  
Today News  
Properties  
Display information about Internet@TV. Use the  
“Check the speed of your internet connection”  
option to test your network connection.  
-
-
-
Blockbuster : You can view movies streamed  
by Blockbuster.  
YouTube : You can view video streamed by  
YouTube.  
Samsung Apps  
Netflix : You can view movies streamed by  
Netflix.  
Various applications are available from here,  
organized into different categories. Some  
applications have a download fee.  
-
-
Pandora : You can listen to Internet radio.  
USA Today News : You can read news  
streamed by USA Today News.  
Samsung Apps  
Video  
1/1  
Name  
-
AccuWeather : You can view weather  
information by AccuWeather.  
Featured  
Most downloaded  
Most recent  
What's New?  
Video  
YouTube  
NOTE  
Free  
Game  
TV store Test User002  
Sports  
The available Internet contents services may be  
added or deleted.  
Lifestyle  
Information  
Other  
My page  
Help  
a
Login  
b
Thumbnail View  
d
Sort by ' Return  
My page  
Displays the application list.  
Help  
If you questions about Internet@TV, check this  
section first. If none of the tips apply, please visit  
the help website.  
English  
ꢃꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
NOTE  
BD-LIvE™  
Update will be completed when the player turns off  
Once the player is connected to the network, you  
can enjoy various movie-related service contents  
using a BD-LIVE compliant disc.  
after restarting. Press the POWER button to turn on  
the updated player for your use.  
Never turn off or on the player manually during the  
update process.  
1. Check the size of the remaining memory.  
The memory device must have at least 1GB  
of free space to accommodate the BD-LIVE  
services.  
Samsung Electronics shall take no legal responsibility  
for player malfunction caused by unstable of internet  
connection or consumer negligence during software  
upgrade.  
2. Insert a Blu-ray disc that supports BD-LIVE.  
3. Select an item from various BD-LIVE service  
Using the AllShare Function  
contents provided by the disc manufacturer.  
NOTE  
AllShare enables you to play music, video and  
The way you use BD-LIVE and the provided contents  
may differ, depending on the disc manufacturer.  
photo files in your PC using the player.  
To use AllShare, you must connect the player to  
your PC via the network (See pages 26~27) and  
install the SAMSUNG PC Share Manager on the  
PC.  
While you enjoy the BD-LIVE service, the pop-up  
message can be displayed.  
In this case, check whether the USB storage device  
is connected with your player or not.  
And then check the selected storage device and  
available size in BD data management. (See page 35)  
com.  
2. Download the SAMSUNG PC Share Manager  
and install it on the PC.  
Software Upgrade Notification  
3. When the installation is completed, you will  
see the SAMSUNG PC Share Manager icon  
on your desktop.  
In network connection, the player will notice you of  
any new software version with a popup message.  
Double-click the icon to launch the application.  
1. Turn on the player.  
Application Program at a Glance  
2. From the Software Upgrade menu, set Auto  
Upgrade Notification to On. (See page 41)  
If there is a new software version available, the  
player will notice you with a popup message.  
6
1
SAMSUNG PC Share Manager  
File Share Server Help  
3. To upgrade the firmware, select Yes.  
It will turn off automatically before restarting.  
(Never turn it on manually.)  
Server : PC Share Manager  
2 3 4 5  
My Computer  
Shared Folder  
C: Document and settings Admin  
Folder  
Full Path  
Folder 1  
C: Document and settin..  
Name  
Size  
Kind  
Folder 1  
File  
4. The update progress popup will appear.  
When the update is completed, it will turn  
back off automatically.  
Folder 2  
Folder 3  
File  
File  
5. Press the POWER button to turn on the  
player.  
8
7
ꢃꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. To select a device, use the RED(A) or BLUE(D)  
button to select a file to play.  
Menu Bar  
1
2
Share Folder Enabled icon : Use this if you want to  
(For playing back Video, Music or Photos files,  
see pages 47~50.)  
select a folder in your PC to share.  
Share Folder Disabled icon : Use this if you want  
3
4
to set folder sharing off.  
Please activate Intern  
e
t
@
T
V service  
Refresh icon : Use this if you want to refresh list of  
to enjoy a variety of Internet Services.  
folders and files in My Computer.  
Set Change State icon : Select a folder to share  
and don’t forget to press this button.  
5
The updated state will be applied to the server.  
Server : Displays the name of the sharing server.  
6
7
No Disc  
a Change Device  
d View Devices " Enter  
Shared Folder : Displays a list of the shared folders.  
My Computer : Displays a list of the folders and  
8
NOTE  
files in the PC.  
Depending on the performance of the external  
modem or router, HD video may not play properly.  
4. Select a folder to share from the My computer  
pane, and click the Share Folder Enabled  
icon ).  
If your system uses a firewall, the player may not  
locate your PC on the TV screen.  
(To remove a shared folder : Select a folder to  
remove from the shared folders, and click the  
Share Folder Disabled icon ).)  
AllShare does not support the following functions.  
-
-
The Background Music and Background Music  
Setting functions.  
5. To apply the updated sharing state to the  
Sorting files by preference in the Photo, Music,  
and Movie folders.  
server, click the Set Change State icon ).  
6. To enable the player to locate a PC server,  
click Share from the menu bar.  
-
-
The Change Group function.  
The Safe Remove function.  
Click Set Device Policy and click Accept.  
The Sorting method may differ depending on the  
sever function.  
SAMSUNG PC Share Manager  
File Share Server Help  
The search and skip operation may differ depending  
on the sever function.  
Server : PC Share Manager  
Set Device Policy  
My Com
Delete  
Item  
C:
If you press the STOP (  
) button during video  
IP  
Device  
State  
SSeetleScttaedte  
ettin..  
Nam
XXX.XXX.X.XX  
SAMSUNG Blu-ray Disc Player Deny  
Accept  
F
playback, stop position will be memorized and it will  
be memorized only end user’s operation.  
But stop position will not be memorized depending  
on the sever function.  
F
F
OK  
Cancel  
During video playback, play time will not display.  
To use AllShare function, please locate both this  
player and PC in same subnet.  
7. Click the Set Change State icon ) and  
move to the home menu on player.  
English  
ꢃꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Before requesting service, please check the following.  
PROBLEM  
SOLUTION  
No operation can be performed with the  
Check the batteries in the remote control. They may need replacing.  
Operate the remote control at a distance of no more than 20 feet.  
remote control.  
Remove batteries and hold down one or more buttons for several minutes  
to drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the Blu-ray Disc/DVD.  
Disc Menu does not appear.  
Ensure that the disc has disc menus.  
The prohibition message appears on the  
screen.  
This message appears when an invalid button is pressed.  
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles)  
You’ve requested a title or chapter number or search time that is out of  
range.  
Play mode differs from the Setup Menu  
selection.  
Some of the functions selected in the Setup Menu may not work properly if  
the disc is not encoded with the corresponding function.  
The screen ratio cannot be changed.  
The Screen Ratio is fixed on your Blu-ray Disc/DVDs.  
This is not a problem with the player.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
The screen is blocked  
If the HDMI output is set to a resolution your TV cannot support (for  
example, 1080p), you may not see a picture on your TV.  
Press the STOP (  
) button (on front panel) for more than 5 seconds with  
no disc inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all the user data stored in  
the BD data will be deleted.  
ꢃꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM  
SOLUTION  
Forgot password  
Press the STOP (  
) button (on front panel) for more than 5 seconds with  
no disc inside. All settings including the password will revert to the factory  
settings.  
Don’t use this unless absolutely necessary.  
When the factory default settings are restored, all the user data stored in  
the BD data will be deleted.  
If you experience other problems.  
Go to the contents and find the section of the user manual that contains the  
explanations regarding the current problem, and follow the procedure once  
again.  
If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
The picture is noisy or distorted  
No HDMI output.  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
Check the connection between the TV and the HDMI jack of the player.  
Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.  
Abnormal HDMI output screen.  
If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
PC Share Manager function  
I can see folders shared through the PC  
Since it shows only files corresponding to the Image, Music, and Movie  
categories, files that do not correspond to these categories may not be  
displayed.  
Share Manager, but I cannot see the files.  
AllShare function  
Video is played intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is not  
overloaded.  
Wireless connection between the server and the player is unstable.  
Check the connection.  
AllShare connection between TV and PC is  
unstable.  
IP address under the same subnetwork should be unique, otherwise IP  
collision can results in such a phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
English  
ꢃꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
PROBLEM  
BD-LIVE  
SOLUTION  
I cannot connect to the BD-LIVE server.  
Check whether the network connection is successful or not by using  
Network Test menu. (See page 39)  
Check whether the USB memory device is connected with player  
or not.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 35)  
Please check whether the BD-LIVE Internet Connection menu is set to  
Allow(All).  
If all above fails, contact the contents provider or update the latest  
firmware.  
When using the BD-LIVE service, an error  
occurs.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 35)  
NOTE  
When the factory default settings are restored, all the user data stored in the BD data will be deleted.  
ꢄ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
J
T
A
JPEG  
49  
TV Aspect  
Title Menu  
Tools Menu  
30  
43  
Accessories  
Ad-hoc  
14  
27  
M
45~47  
Anynet+ (HDMI-CEC)  
Audio Language  
AllShare  
34  
46  
Movie Frame (24F)  
MP3  
32  
U
56~57  
48~49  
USB Storage Device  
50  
B
N
W
BD Wise  
30  
35  
Network Setup  
36~39  
30~31  
BD Data Management  
BD-LIVE  
Wireless Network  
27, 37~39  
39, 56  
47  
O
Wireless LAN Adapter  
27  
BONUSVIEW  
Background Music  
Optimal Resolution  
49  
Z
P
Zoom  
50  
C
PCM Downsampling  
Popup Menu  
33  
43~44  
46~47  
Component  
22  
26  
46  
Cable Network  
Camera Angle  
Picture Setting  
R
D
Region Code  
Remote Control Sensor  
Remote Control  
Resolution  
13  
15  
Digital Output  
32~33  
34  
Dynamic Range Control  
Downmixing Mode  
DTS Neo:6  
18  
34  
30  
34  
Repeat  
45, 48  
DST (Daylight Saving Time) 35  
DivX  
35~36  
43  
S
Disc Menu  
Disc Structure  
Software Upgrade  
Search and Skip  
Slow and Step  
Subtitle Language  
Slide Show  
41, 56  
44  
43  
44  
H
46  
HDMI  
20, 34  
49  
HDMI Supported Amplifier 24  
SAMSUNG PC Share  
Manager  
HDMI Deep Color  
32  
56~57  
I
Internet@TV  
34, 52~55  
28, 34  
Initial Settings  
English  
ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Power Requirements  
AC 120V, 60Hz  
Power Consumption  
Weight  
14W  
3.8 Ibs  
General  
Dimensions  
17.1 (W) X 8.1 (D) X 1.7 (H) inches  
+41°F to +95°F  
Operating Temperature Range  
Operating Humidity Range  
BD (Blu-ray Disc)  
10 % to 75 %  
Reading Speed : 4.917 m/sec  
Reading Speed : 3.49 ~ 4.06 m/sec.  
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
1 Channel : 1.0 Vp-p (75Ω load)  
Blu-ray/DVD Disc : 480i  
DVD (Digital Versatile Disc)  
CD : 5 inches (COMPACT DISC)  
CD : 3 1/2 inches (COMPACT DISC)  
Composite Video  
Disc  
Y : 1.0 Vp-p (75Ω load)  
PR : 0.70 Vp-p (75Ω load)  
PB : 0.70 Vp-p (75Ω load)  
Blu-ray Disc : 1080i, 720p, 480p, 480i  
DVD : 480p, 480i  
Video Output  
Video/Audio  
Component Video  
HDMI  
1080p, 1080i, 720p, 480p  
PCM multichannel audio, Bitstream audio  
2 Channel  
Digital Audio Output  
L(1/L), R(2/R)  
Optical  
48 kHz Sampling : 4 Hz to 22 kHz  
*Frequency Response  
Audio Output  
96 kHz Sampling : 4 Hz to 44 kHz  
*S/N Ratio  
*Dynamic Range  
*Total Harmonic Distortion  
110 dB  
100 dB  
0.003%  
*: Nominal specification  
-
-
Design and specifications are subject to change without prior notice.  
Weight and dimensions are approximate.  
ꢄꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Subject to the restrictions described below and those noted throughout this Manual, including the Disc  
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded  
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and  
CD-RW/-R discs.  
Discs other than the above cannot and/or is not intended to be played by this player. And some of the  
above discs may not play due to one or more reasons provided below.  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to  
all operating commands or operate all features of every disc. These and other disc compatibility and  
player operation issues with new and existing format discs are possible because:  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs  
because some features may be optional, additional features may have been added to the Blu-ray  
Disc format after the production of this player, and certain available features may be subject to  
delayed availability;  
-
-
-
not all new and existing disc format versions are supported by this player;  
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;  
some discs are produced in a manner that allows specific or limited operation and feature during  
playback;  
-
-
some features may be optional, additional features may have been added after the production of this  
player or certain available features may be subject to delayed availability;  
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and  
CD-RW/-R logos may still be non-standardized discs;  
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the  
manufacture of discs;  
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and posted by  
SAMSUNG customer care center.  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care  
center.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the Precautions,  
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this  
user manual.  
Copy Protection  
Because AACS (Advanced Access Content System) is approved as content protection system for  
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain  
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.  
The operation of this product and restrictions on this product may vary depending on your time of  
purchase as those restrictions may be adopted and/or changed by AACS after the production of this  
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for  
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,  
or this product, please contact SAMSUNG customer care center.  
English  
ꢄꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Many Blu-ray Disc/DVD discs are encoded with copy protection. Because of this, you should only  
connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted  
picture from copy-protected Blu-ray Disc/DVD discs.  
This item incorporates copy protection technology that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,  
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other  
materials may subject you to civil and/or criminal liability.  
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT  
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND  
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.  
Network Service Disclaimer  
All content and services accessible through this device belong to third parties and are protected by  
copyright, patent, trademark and/or other intellectual property laws. Such content and services are  
provided solely for your personal noncommercial use. You may not use any content or services in a  
manner that has not been authorized by the content owner or service provider. Without limiting the  
foregoing, unless expressly authorized by the applicable content owner or service provider, you may  
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or  
distribute in any manner or medium any content or services displayed through this device.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT  
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.  
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG  
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS  
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO  
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN  
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN  
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY  
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Third party services may be terminated or interrupted at any time, and Samsung makes no representation  
or warranty that any content or service will remain available for any period of time. Content and services  
are transmitted by third parties by means of networks and transmission facilities over which Samsung  
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any  
responsibility or liability for any interruption or suspension of any content or service made available  
through this device.  
Samsung is neither responsible nor liable for customer service related to the content and services.  
Any question or request for service relating to the content or services should be made directly to the  
respective content and service providers.  
ꢄꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol  
are trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567  
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are  
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are  
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.  
®
ABOUT DIVX VIDEO : DivX is a digital video format created by DivX,Inc. This is an official  
software tools to convert your files into DivX video.  
®
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in order to play  
DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section  
in the device setup menu. Go to vod.divx.com with this code to complete the registration process and  
learn more about DivX VOD.  
DivX Certified to play DivX video up to HD 1080p, including premium content.  
The product unit accompanying this user manual is licensed under certain intellectual property rights of  
certain third parties. This product is covered by one or more of the following U.S. patents : 5,457,669  
5,561,649 5,705,762 6,043,912 6,438,099 6,467,061 6,556,521 6,578,163 6,697,307 6,728,474  
6,771,891 6,894,963 6,895,593 6,937,815 6,996,327 7,009,926 7,085,221 7,088,649 7,092,327  
7,099,566 7,123,564 7,142,493 7,142,495 7,145,861 7,146,624 7,151,729 7,161,879 7,164,647  
7,167,437 7,173,891 7,177,250 7,194,187 7,203,891 7,209,423 7,210,067 7,228,062 7,245,566  
7,245,567 7,257,065 7,263,045 7,269,110 7,272,086 7,272,106 7,280,460 7,283,729 7,286,454  
7,304,938  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming to  
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features  
or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Open Source License Notice  
-
In the case of using open source software, Open Source Licenses are available on the product  
menu.  
English  
ꢄꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and  
delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing  
defects in materials and workmanship for the following limited warranty period:  
One (1) Year Parts / Ninety Days (90) Labor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be performed by  
SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale must be presented upon  
request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation to and from the service  
center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be  
defective during the limited warranty period specified above. The product must be returned during the warranty period with  
transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product for warranty service,  
the purchaser must contact SAMSUNG for problem determination and service procedures. SAMSUNG does not warrant  
uninterrupted or error-free operation of the product.  
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and  
products assume the remaining original warranty, or ninety (90) days, whichever is longer.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use  
of this product and shall not apply to the following, including, but not limited to: damage which occurs in shipment; applications  
and uses for which this product was not intended; failures or problems which are caused by products or equipment not supplied  
by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical  
line voltage, fluctuations or surges; damage caused by improper or faulty installation; improper connection with any peripheral;  
product alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial  
numbers; failure to follow operating instructions, customer adjustments, maintenance and environmental instructions that are  
covered and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment  
which damage this product or result in service problems; failures or problems due to incompatibility with other equipment.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any  
manner whatsoever. The time within which an action must be commended to enforce any obligations of SAMSUNG arising under  
the warranty or under any statute, or law of the United States or of any state thereof, is hereby limited to ninety (90) days from the  
date you discovered or should have discovered the defect. This limitation does not apply to implied warranties arising under state  
law, if any.  
SAMSUNG does not warrant (i) disc compatibility with new and existing format discs or (ii) error free playback in full compliance  
with specifications of the compatible disc formats, and SAMSUNG shall not be liable for any data loss recorded in your discs.  
SAMSUNG’s responsibility shall be limited to appropriate warranty services during the warranty period through SAMSUNG  
customer care center. If you encounter compatibility or data loss problems, please contact SAMSUNG customer care center.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF  
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE  
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING  
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND  
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY  
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS  
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS  
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Area  
Contact Center  
Web Site  
Area  
Contact Center   
Web Site  
0700 Samsung (0700 726  
7864)  
` North America  
Canada  
Serbia  
1-800-SAMSUNG (726-7864)  
Slovakia  
0800-SAMSUNG (726-7864)  
Mexico  
01-800-SAMSUNG (726-7864) www.samsung.com  
Spain  
902-1-SAMSUNG (902 172 678) www.samsung.com  
U.S.A  
1-800-SAMSUNG (726-7864)  
Sweden  
0771 726 7864 (SAMSUNG)  
` Latin America  
Argentine  
Brazil  
ch_fr/(French)  
0800-333-3733  
0800-124-421 / 4004-0000  
800-SAMSUNG (726-7864)  
01-8000112112  
0-800-507-7267  
1-800-751-2676  
1-800-10-7267  
800-6225  
0848-SAMSUNG (7267864,  
Switzerland  
CHF 0.08/min)  
Chile  
U.K  
0330 SAMSUNG (7267864)  
0818 717100  
Colombia  
Costa Rica  
Dominica  
Ecuador  
Eire  
Lithuania  
Latvia  
8-800-77777  
8000-7267  
Estonia  
` CIS  
800-7267  
El Salvador  
Guatemala  
Honduras  
Jamaica  
1-800-299-0013  
800-7919267  
Russia  
Georgia  
Armenia  
Azerbaijan  
8-800-555-55-55  
8-800-555-555  
0-800-05-555  
-
-
-
1-800-234-7267  
00-1800-5077267  
800-7267  
Nicaragua  
Panama  
088-55-55-555  
8-10-800-500-55-500  
(GSM: 7799)  
Kazakhstan  
Uzbekistan  
Kyrgyzstan  
Tadjikistan  
Peru  
0-800-777-08  
Puerto Rico  
1-800-682-3180  
8-10-800-500-55-500  
00-800-500-55-500  
8-10-800-500-55-500  
Trinidad &  
Tobago  
1-800-SAMSUNG (726-7864)  
0-800-100-5303  
Venezuela  
` Europe  
Albania  
ua_ru  
Ukraine  
0-800-502-000  
42 27 5755  
-
Belarus  
810-800-500-55-500  
00-800-500-55-500  
-
-
0810 - SAMSUNG (7267864,  
€ 0.07/min)  
Austria  
Moldova  
` Asia Pacific  
be (Dutch)  
Australia  
1300 362 603  
Belgium  
02-201-24-18  
be_fr (French)  
New Zealand  
China  
0800 SAMSUNG (0800 726 786) www.samsung.com  
400-810-5858 / 010-6475 1880 www.samsung.com  
Bosnia  
Bulgaria  
Croatia  
05 133 1999  
07001 33 11  
-
Hong Kong  
(852) 3698 4698  
hk_en/  
062 SAMSUNG (062 726 7864) www.samsung.com  
800-SAMSUNG (800-726786)  
3030 8282 / 1800 110011 /  
India  
Samsung Zrt., česká organizační  
1800 3000 8282 / 1800 266 8282  
Czech  
složka, Oasis Florenc, Soko-  
0800-112-8888 /  
021-5699-7777  
Indonesia  
lovská394/17, 180 00, Praha 8  
Denmark  
Finland  
France  
Germany  
70 70 19 70  
Japan  
0120-327-527  
1800-88-9999  
030 - 6227 515  
01 48 63 00 00  
Malaysia  
1-800-10-SAMSUNG(726-7864) /  
1-800-3-SAMSUNG(726-7864) /  
1-800-8-SAMSUNG(726-7864) /  
02-5805777  
01805 - SAMSUNG (726-7864  
€ 0,14/Min)  
Philippines  
Hungary  
06-80-SAMSUNG (726-7864)  
800-SAMSUNG (726-7864)  
+381 0113216899  
261 03 710  
Singapore  
Thailand  
Taiwan  
1800-SAMSUNG (726-7864)  
Italia  
1800-29-3232 / 02-689-3232 www.samsung.com  
Kosovo  
-
0800-329-999  
1 800 588 889  
Luxemburg  
Macedonia  
Montenegro  
Vietnam  
` Middle East  
Bahrain  
023 207 777  
-
-
020 405 888  
8000-4726  
0900-SAMSUNG  
Netherlands  
Norway  
Poland  
(0900-7267864) (€ 0,10/Min)  
Egypt  
08000-726786  
800-22273  
815-56 480  
Jordan  
0 801 1SAMSUNG (172678)  
/ 022-607-93-33  
Morocco  
Oman  
080 100 2255  
800-SAMSUNG (726-7864)  
9200-21230  
Portugal  
80820-SAMSUNG (726-7864)  
Saudi Arabia  
Turkey  
1. 08010 SAMSUNG (72678) -  
doar din reţeaua Romtelecom,  
tarif local  
444 77 11  
U.A.E  
800-SAMSUNG (726-7864)  
Rumania  
` Africa  
2. 021.206.01.10 - din orice  
reţea, tarif normal  
Nigeria  
0800-SAMSUNG (726-7864)  
0860-SAMSUNG (726-7864 )  
South Africa  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
IN THE US  
(7267864)  
AK68-01854A-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Stereo Amplifier 32 2055 User Guide
Raypak Heat Pump RHP 115HC User Guide
Renesas Webcam r0k578g User Guide
Ricoh Printer BP20 User Guide
RIDGID Saw 932 932VS User Guide
Samsung Camcorder AD68 00839H User Guide
Samsung Cell Phone C414 User Guide
Samsung CRT Television 21Z50 User Guide
Samsung Laptop NP700G7CS02US User Guide
Sanyo Freezer HF 5017 User Guide