Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
1.3 Features
z
Comply with IEEE 802.11b/g/n standards with up to 300Mbps data transfer
speed.
z
z
z
Thumb size design with USB 2.0/1.1 interface.
Supports QoS Enhancement (WMM) for multimedia applications’ smoothness
High level of security with Wireless encryption of 64/128-bit WEP, WPA, WPA2,
and IEEE802.1x functions.
z
z
Runs under most operating systems: Windows 2K/XP/Vista/7 (32/64 bits), Mac
OSX 10.4~10.6 and Linux 2.6.x.
Support One-Click WPS (WiFi Protected Setup) connection.
1.4 Product Specification
Chipset
Standard
Bus Type
Realtek RTL8192CU
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3,
IEEE 802.3u
USB 2.0 Type A
Frequency Band 2.412~2.462GHz
Data Rate
Max 300Mbps
Output Power
11b: 17±1 dBm , 11g: 13±1 dBm, 11n: 12±1 dBm
802.11b Typical -84dBm
Receive
802.11g Typical-70dBm
Sensitivity
802.11n Typical-66dBm
64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2,
AES WPS button
Security
Antenna
Internal Antenna (2T2R)
Windows XP/Vista/7 32 and 64 bit; Linux Kernel 2.6.x;
Mac OS X 10.5 and 10.6
OS support
1.35” x 0.66” x 0.31” (34.5 x 16.8 x 8 mm (include USB
head))
Dimension
Temperature
Humidity
Operating: 32~104°F (0~40°C); Storage: -4~140°F
(-20~60°C)
Operating: 10~90% (Non-Condensing); Storage: Max.
95% (Non-Condensing)
1.5 System Requirement
You must have at least the following
z
A laptop computer/desktop PC with an available USB port
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
z
z
z
z
z
At least a 300MHz processor and 32MB of memory
Windows OS for Win98SE, ME, 2000, XP, Vista, 7 or Mac OS X 10.4~10.6
A CD-ROM Drive
USB controller properly installed and working in the computer
A 802.11n、802.11g or 802.11b Wireless Access Point/Router (for infrastructure
Mode) or another 802.11n、802.11g or 802.11b wireless adapter (for Ad-Hoc;
Peer-to-Peer networking mode).
1.6 LED Status
This USB Adapter contains one LED. Please refer to the following description for LED
definition.
LED
Status
Working Status
Indications
Blink blue
The Adapter is Radio on
Blink blue and flashing
intermittently
The Adapter is already connected but
is not transmitting or receiving data
Radio/ACT
LED
The Adapter is activity and
transmitting of receiving data.
The Adapter is Radio off
Blink blue and fast flashing
Off
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Chapter 2 Installation Guide
2.1 Hardware Installation
z
Please first insert the RNX-MiniN2 into your PC or NB USB slot.
z
If the following window popup, please click Cancel or Close:
„
Under Win XP
„
Under Windows Vista/Win7
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
2.2 Installation using Driver CD:
Please insert the CD into your
CD-rom drive
Click on the “Driver
Installation” option when the
Smart Wizard page popup.
If the program didn’t run
automatically, please double
click on the Setup.exe in the CD
to start the process.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Click Yes if the following window
popup
For WinXP, you may need to
select your desired Language of
installtion. For Win7, the
program will uses your current
language as default setting.
Select Next.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Select “Yes, I want to restart
my computer now.” Then click
Finish.
Upon restart, your installation is
now ready.
if you see below window popup, please select install this driver software anyway.
Win7
Win XP
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Chapter 3 Wireless Connection Guide
This chapter describes how to configure your Adapter for wireless connectivity on
your Wireless Local Area Network (WLAN) and use the data security encryption
features.
After Installing the Adapter, the Adapter’s tray icon will appear in your system tray. It
appears at the bottom of the screen, and shows the signal strength using color and
the received signal strength indication (RSSI).
In the following instruction for making a network connection, we use the provided
Utility to configure your wireless network settings.
Note: You could use either the software we provide or Microsoft Zero Configuration
tool to configure this adapter.
3.1 Connecting with Microsoft Zero Configuration tool (Win XP)
z
After specifying the Microsoft Zero Configuration tool to configure your wireless
network, right click on the icon on system tray. Select “View Available
Wireless Networks” to specify your wireless network.
z
The tool shows the available wireless networks. Select your demanding network
to connect with.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
z
If prompted, enter the password/network key for your wireless network and click
the Connect button.
3.2 Connecting with Window 7
You can easily access to wireless with Win7. First, move your mouse to lower right
hand corner as below and click on the icon where arrow pointing to.
Click Refresh to get an update of your Wireless Network Connection. This should
help you search the SSID of the network you want to connect to.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
Select your desired SSID, then Click “Connect”.
You will be prompt to ask you entering the network security key. Once entered, please
click OK to complete.
You should see below in a very short period and find out whether you are connected
or now.
3.3 Connecting with Rosewill Wireless Utility
We also provide this Utility for users to connect to a wireless network easily. It
provides more information and configuration for this adapter. As default, the Utility is
started automatically upon starting your computer and connects to a connectable
wireless network with best signal strength and with no security setting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
1. First Select the Available Network
option:
2. You will see a list of the SSID that
your wireless adapter has scanned in
your surrounding area. You can also
“Refresh” to see the most updated
list. Select your desired SSID (the one
you want to link with).
3. Click Add to Profile.
After click “Add to Profile”, you will
see the next window “Wireless
Network Properties” popup with your
current wireless signal setting.
(RNX-MiniN2 will detect automatically
the current encryption setting of your
SSID).
So after the “Wireless Network
Properties” popup, all you need to do
is to enter the password of your SSID
and click OK to continue.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless N Adapter RNX-MiniN2
Quick Installation Guide
When done, your wireless adapter will
automatically connect to this SSID.
However, Please do make sure
returning to “Profile” and set your
SSID Profile as your default.
So your utility will remember for the
future to link to this SSID when
computer is Power-On.
Now you have completed the setup of your wireless network. You should be ready to surf!
Thank you for purchasing a quality Rosewill Product.
product.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|