Rosewill Network Router EASYN400 User Guide
Wireless Router RNX-EasyN400  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Table of Contents  
TABLE OF CONTENTS .......................................................................................................................2  
BEFORE WE BEGIN............................................................................................................................4  
1
INTRODUCTION ........................................................................................................................5  
1.1 OVERVIEW.....................................................................................................................................5  
1.2 KEY FEATURES .............................................................................................................................5  
1.3 PACKAGE CONTENTS....................................................................................................................6  
1.4 PRODUCT LAYOUT AND LED SIGNAL ..........................................................................................7  
1.5 NETWORK + SYSTEM REQUIREMENTS.........................................................................................8  
1.6 RNX-EASYN400 PLACEMENT......................................................................................................8  
1.7 RNX-EASYN400’S LAN & WAN CABLE CONNECTION SETUP..................................................9  
2
3
SETUP WIZARD........................................................................................................................11  
2.1 SETUP WIZARD – GETTING START.............................................................................................11  
2.2 SETUP WIZARD – CONFIGURATION............................................................................................12  
2.3 SETUP WIZARD – CONNECT MODE SELECTION ........................................................................16  
2.3.1 AP Router Mode ....................................................................................................................... 16  
2.3.2 AP Repeater Mode.................................................................................................................... 21  
2.3.3 Connecting to RNX-EasyN400 in AP Repeater Mode.............................................................. 22  
ACCESSING RNX-EASYN400 THROUGH WEB BROWSER IN ROUTER MODE.......26  
3.1 RESETTING THE RNX-EASYN400..............................................................................................27  
3.1.1 Procedure to Use the Reset Button............................................................................................ 27  
3.2 NAVIGATE RNX-EASYN400.......................................................................................................27  
3.2.1 Navigating RNX-EasyN400 in AP Router Mode...................................................................... 28  
3.2.1.1 RNX-EasyN400 Side Menu Description Table – AP Router Mode....................................... 28  
3.2.2 Navigating RNX-EasyN400 in AP Repeater Mode .................................................................. 30  
3.2.2.1 RNX-EasyN400 Side Menu Description Table – AP Repeater Mode ................................... 31  
3.3 RNX-EASYN400’S SYSTEM PAGE..............................................................................................33  
3.3.1 Status......................................................................................................................................... 33  
3.3.2 LAN.......................................................................................................................................... 34  
3.3.3 DHCP........................................................................................................................................ 35  
3.3.4 Schedule.................................................................................................................................... 37  
3.3.5 Log............................................................................................................................................ 38  
3.3.6 Monitor ..................................................................................................................................... 38  
3.3.7 Language................................................................................................................................... 39  
3.4 RNX-EASYN400’S WIZARD PAGE .............................................................................................40  
3.5 RNX-EASYN400’S INTERNET PAGE...........................................................................................41  
3.5.1 Status......................................................................................................................................... 41  
3.5.2 Dynamic IP ............................................................................................................................... 41  
3.5.3 Static IP..................................................................................................................................... 42  
3.5.4 Point-to-Point over Ethernet Protocol (PPPoE)......................................................................... 42  
3.5.5 Point-to-Point Tunneling Protocol (PPTP)................................................................................ 43  
3.6 RNX-EASYN400’S WIRELESS PAGE ..........................................................................................44  
3.6.1 Basic ......................................................................................................................................... 44  
3.6.2 WDS with AP Router................................................................................................................ 47  
3.6.3 Advanced .................................................................................................................................. 48  
3.6.4 Security..................................................................................................................................... 49  
3.6.5 Filter.......................................................................................................................................... 53  
3.6.6 WPS (Wi-Fi Protected Setup) ................................................................................................... 55  
3.6.7 Client List ................................................................................................................................. 56  
3.6.8 Policy........................................................................................................................................ 56  
3.7 RNX-EASYN400’S FIREWALL PAGE..........................................................................................58  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.7.1 Advanced .................................................................................................................................. 58  
3.7.2 Demilitarized Zone (DMZ)....................................................................................................... 58  
3.7.3 Denial of Service (DoS)............................................................................................................ 59  
3.7.4 MAC Filter................................................................................................................................ 60  
3.7.5 IP Filter ..................................................................................................................................... 61  
3.7.6 URL Filter................................................................................................................................. 62  
3.8 RNX-EASYN400’S ADVANCED PAGE.........................................................................................64  
3.8.1 Network Address Translation (NAT)........................................................................................ 64  
3.8.2 Port Mapping ............................................................................................................................ 64  
3.8.3 Port Forwarding (Virtual Server) .............................................................................................. 66  
3.8.4 Port Triggering (Special Applications) ..................................................................................... 67  
3.8.5 Application Layer Gateway (ALG)........................................................................................... 69  
3.8.6 UPnP......................................................................................................................................... 70  
3.8.7 Quality of Service (QoS)........................................................................................................... 70  
3.8.8 Routing ..................................................................................................................................... 72  
3.9 RNX-EASYN400’S TOOLS PAGE................................................................................................73  
3.9.1 Admin and Remote Management.............................................................................................. 73  
3.9.2 Time.......................................................................................................................................... 75  
3.9.3 DDNS ....................................................................................................................................... 77  
3.9.4 Power ........................................................................................................................................ 77  
3.9.5 Diagnosis .................................................................................................................................. 78  
3.9.6 Firmware................................................................................................................................... 78  
3.9.7 Back-up..................................................................................................................................... 81  
3.9.8 Reset ......................................................................................................................................... 81  
4
REPEATER MODE ...................................................................................................................83  
4.1 RNX-EASYN400 IN REPEATER MODE’S SYSTEM PAGE ............................................................87  
4.1.1 Status......................................................................................................................................... 87  
4.1.2 LAN.......................................................................................................................................... 87  
4.1.3 Schedule.................................................................................................................................... 88  
4.1.4 Log............................................................................................................................................ 89  
4.1.5 Monitor ..................................................................................................................................... 90  
4.1.6 Language................................................................................................................................... 90  
4.2 RNX-EASYN400 IN REPEATER MODE’S WIZARD PAGE ...........................................................92  
4.3 RNX-EASYN400 IN REPEATER MODE’S WIRELESS PAGE........................................................92  
5
PC NETWORK ADAPTER SETUP (UNDER WINDOWS XP) .............................................97  
APPENDIX A – PRODUCT SPECIFICATION..............................................................................100  
APPENDIX B – TROUBLESHOOTING.........................................................................................102  
APPENDIX C – FCC INTERFERENCE STATEMENT ...............................................................109  
APPENDIX D – IC INTERFERENCE STATEMENT...................................................................111  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Before We Begin  
• Please configure RNX-EasyN400 with the computer that was last connected directly to  
your modem.  
• You can only use the Ethernet port on your modem. If you were using the USB  
connection before using RNX-EasyN400, then you must turn off your modem,  
disconnect the USB cable and connect an Ethernet cable to the Internet port on RNX-  
EasyN400, and then turn the modem back on. In some cases, you may need to call your  
ISP to change connection types (USB to Ethernet).  
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any  
PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or  
you will not be able to connect to the Internet.  
• When running the Setup Wizard from the Rosewill CD, make sure the computer you are  
running the CD from is connected to the Internet and online or the wizard will not work.  
If you have disconnected any hardware, re-connect your computer back to the modem  
and make sure you are online.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
1 Introduction  
1.1 Overview  
Congratulations on your purchase of RNX-EasyN400 Wireless Network Broadband  
Router. RNX-EasyN400 is compatible with 802.11g & 802.11b and draft 802.11n v2.0.  
RNX-EasyN400 is not only a Wireless Access Point, but also doubles as a 4-port full-  
duplex Switch that connects your wired-Ethernet devices together at incredible speeds.  
At 150Mbps wireless transmission rate, RNX-EasyN400’s Access Point function built  
into RNX-EasyN400 uses advanced MIMO (Multi-Input, Multi-Output) technology to  
transmit multiple steams of data in a single wireless channel giving you seamless access  
to multimedia content. Robust RF signal travels farther, eliminates dead spots and  
extends network range. For data protection and privacy, RNX-EasyN400 can encodes all  
wireless transmissions with either WEP or WPA, or WPA2 encryption.  
1.2 Key Features  
Features  
Advantages  
Heavy data payloads such as MPEG  
video streaming  
Incredible Data Rate up to 150Mbps**  
Fully Interoperable with IEEE  
802.11b / IEEE 802.11g compliant  
devices with legacy protection  
IEEE 802.11b/g Compliant  
Four 10/100 Mbps Fast Switch Ports (Auto-  
Crossover)  
Scalability, extend your network.  
Firewall supports, DMZ, MAC Filter, IP  
Filter, URL Filter, ICMP Blocking, SPI, Port  
Mapping, Port Forwarding, Port Trigger  
Avoids the attacks of Hackers or  
Viruses from Internet  
Support 802.1x Authenticator, 802.11i  
(WPA/WPA2, AES), VPN pass-through  
Provide mutual authentication (Client  
and dynamic encryption keys to  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
enhance security  
Make wireless AP and Bridge mode  
simultaneously as a wireless repeater  
WDS (Wireless Distribution System)  
** Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g, n chipset used. Actual  
throughput may vary. Network conditions and environmental factors lower actual throughput rate. All  
specifications are subject to change without notice.  
1.3 Package Contents  
Open the package carefully, and make sure that none of the items listed below are  
missing. Do not discard the packing materials, in case of return; the unit must be shipped  
back in its original package.  
1. 1x 802.11n EasyN400 Router with 2dBi 2.4GHz Fixed Antennas  
2. 1x 100V~240V Power Adapter  
3. 1x Quick Install Guide  
4. 1x CD (User’s Manual)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
1.4 Product Layout and LED Signal  
LED  
Color  
Status  
Description  
RNX-EasyN400 is receiving power and functioning  
properly.  
On  
POWER  
Amber  
Blinking  
Off  
RNX-EasyN400 is performing test or reset  
RNX-EasyN400 is not receiving power  
RNX-EasyN400 is ready, but not sending/receiving  
wireless signals  
On  
RNX-EasyN400 is sending/receiving wireless signals  
WLAN/WPS  
Blue  
Blue  
Blinking  
RNX-EasyN400 is connecting WPS with a wireless  
client.  
Off  
On  
The Wireless LAN is not ready or fail  
WAN  
RNX-EasyN400 is connecting successfully on WAN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Blinking  
Off  
RNX-EasyN400 is sending/receiving data through WAN  
The WAN is not ready or fail  
RNX-EasyN400 has a successful Ethernet connection.  
On  
RNX-EasyN400 is sending/receiving data through LAN  
port  
LAN 1~4 port  
Blue  
Blinking  
Off  
The LAN is not ready or fail  
Press this button for 1 second to set up a wireless connection via WiFi Protected Setup with  
another WPS-enabled client. You must press the WPS button on the client side within 120  
seconds for a successful connection.  
WPS  
1.5 Network + System Requirements  
To begin using the RNX-EasyN400, make sure you meet the following as minimum  
requirements:  
h
h
h
h
h
h
h
PC/Notebook.  
Operating System – Microsoft Windows 98SE/ME/XP/2000/VISTA  
1 Free Ethernet port.  
WiFi card/USB dongle (802.11b/g/n) – optional.  
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).  
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera etc.)  
Few Ethernet compatible CAT5 cables.  
1.6 RNX-EasyN400 Placement  
We suggest that you can place RNX-EasyN400 on a desk or other flat surface, or you can  
mount it on a wall, however, for optimal performance, place your RNX-EasyN400 in the  
center of your office (or your home) that is away from any potential source of  
interference, such as a metal wall or microwave oven. This location must be close to a  
power connection and your ADSL/Cable modem. If the antennas are not positioned  
correctly, performance loss may occur.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
1.7 RNX-EasyN400’s LAN & WAN Cable Connection  
Setup  
WAN connection:  
Connect Ethernet cable between WAN ports of your ADSL/CABLE modem &  
INTERNET port of RNX-EasyN400. Make sure your ADSL/CABLE modem is working  
well. Contact your ISP if you have any questions.  
RNX-EasyN400 Rear View + Intnernet plugin  
RNX-EasyN400 WAN Connection Diagram  
LAN connection:  
Connect Ethernet cable between your PC/Notebook LAN port & one of the 4 available  
LAN ports on RNX-EasyN400.  
RNX-EasyN400 Rear View + LAN Plugin  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
RNX-EasyN400 LAN Connection Diagram  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
2 Setup Wizard  
We will introduce the Smart Wizard in this section. Please make sure the following  
before insert the CD into the CD/DVD drive:  
•
Internet connection should be setup & ready to use (ADSL or cable modem).  
•
Modem must provide a RJ45 port to connect with RNX-EasyN400.  
Please refers to previous page’s “RNX-EasyN400 LAN Connection Diagram“  
Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter.  
¾
•
•
CAT 5 network cable(s) connects to the LAN port on PC/Notebook.  
2.1 Setup Wizard – Getting Start  
Insert the RNX-EasyN400 CD into your DVD/CD drive. The SETUP WIZARD should  
run automatically with a few seconds. If not, please open Windows Explorer and find the  
root directory of the CD (Usually “your DVD/CD Drive, eg D:\”). Double click on  
Wizard.exe icon to run it.  
Wizard.exe  
After Double Click on the icon, the window below should popup:  
Click Setup Wizard to setup your RNX-EasyN400.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Click User Manual to open user manual.  
Click Adobe Reader to install Adobe Acrobat reader on your PC/Notebook. Click EXIT  
anytime you want to abort.  
2.2 Setup Wizard – Configuration  
Click <Next> to proceed. Click <Exit> to abort.  
RNX-EasyN400 should be setup as depicted above.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Make sure your DSL/CABLE modem is setup and working. Else take the help of your  
internet service provider.  
Click <Next> to proceed.  
Check the MODEM and RNX-EasyN400 connection. It should be as shown below.  
Check power connection for modem as well as RNX-EasyN400.  
Click <Next> to proceed.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Notice the LED will light up at this stage. If not, check your procedures again.  
Click <Next> to configure WAN & Wireless settings. The Wizard page will show up as  
below:  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Then, you will be prompt to RNX-EasyN400 login page  
User name and password are admin/admin. Click <OK>. Your default browser will  
connect to RNX-EasyN400 Web Server http://192.168.0.1 .  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Click <Next> to enter mode selection.  
2.3 Setup Wizard – Connect Mode Selection  
This is where you select the mode that RNX-EasyN400 is going to be use and set its  
configurations. You can choose AP Router Mode is when you want to set RNX-  
EasyN400 as a wireless LAN administrator for your computer or gaming console to  
connect to. Or you can choose AP Repeater mode is the WDS/Bridge mode which will  
extend your wireless signal, but does not enable WAN interface. Setup Wizard will skip  
WAN Configuration when you select this mode.  
2.3.1 AP Router Mode  
Click <Next>, Setup Wizard will automatically detect your Internet Network settings.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Depending on your Network setting, Wizard will show you either one of the pages below,  
the best detecting option will be selected, please click <Next> unless you want to  
manually configure your connecting option.  
2.3.1.1 DHCP Mode Selection  
Smart Wizard has detected DHCP client. Click <Next>, you will see the page show  
below which ask you to configure the host name and MAC address of RNX-EasyN400.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
LABEL  
DESCRIPTION  
Host Name  
This is optional. Depending on if your ISP require you to provide this  
information. Please leave this blank, if you are not sure.  
MAC address  
The default value when Click <Clone MAC Address> is set to the WAN’s  
physical interface of the broadband router.  
Smart Wizard has finished setting up WAN Configuration. Click <Next> to proceed.  
2.3.1.2 Wireless Security Selection  
After Click <Next>, you should see the page as show below. By moving your mouse  
curser on the <Security Bar>; you will see different Options for you to set up your  
Wireless Router’s Connecting Mode.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Please choose your security level, and enter your desired name for your wireless network  
(SSID) and security key (Key); Click <Next> to proceed.  
Depending on how you set up RNX-EasyN400, you will see different result pages before  
you reboot your RNX-EasyN400.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Below is the example page, if you select the highest security to be your RNX-EasyN400  
Connecting option.  
To apply the entire configuration, click <Reboot>.  
You will see the below count down when <Reboot> clicked.  
LABEL  
SSID  
DESCRIPTION  
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the  
wireless LAN.  
If you change this field on the RNX-EasyN400, make sure all wireless  
stations use the same SSID in order to connect to RNX-EasyN400 to access  
the network.  
Key  
Based on selected Security Level, you will have None, WEP, WPA, and  
WPA2 to select from.  
None: Choose this to have no wireless LAN security configured. If you do  
not enable any wireless security on your RNX-EasyN400, your network is  
accessible to any wireless networking device that is within range.  
WEP: WEP is the original wireless encryption standard which has less  
security level compare to WPA and WPA2.  
WPA and WPA2: Security to configure a Pre-Shared Key. Choose this  
option only if your wireless clients support WPAPSK or WPA2-PSK  
respectively.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
NOTE:  
After Wireless settings are applied, you need to connect from your WLAN client with the  
security settings you just finished configuring. Remember to write down the type of  
security & security key you selected.  
2.3.2 AP Repeater Mode  
AP Repeater mode is the Repeater mode which will extend your wireless signal, but  
does not enable WAN interface. Setup Wizard will skip WAN Configuration when you  
select this mode. Click <Next> when select AP Repeater Mode.  
NOTE:  
For Detail step by step guides, please refer to page 89 for AP Repeater Mode.  
The Wizard will prompt you to enter the SSID which you want to use for this Repeater  
based on your security level. After type-in your desire SSID, click <Next>  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
You should see the below page, click <Reboot>  
You will see the count down of the system rebooting  
2.3.3 Connecting to RNX-EasyN400 in AP Repeater Mode  
RNX-EasyN400 will restart as a repeater now. However, in order to access to the  
configuration web page of the repeater, you will need to manually adjust your  
computer’s IP.  
Windows XP:  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
1. Click on Start > Control Panel > Network and Internet Connections > Network  
connections.  
2. Right-click on the Local Area Connection which represents your network card and  
selects Properties.  
3. Highlight Internet Protocol (TCP/IP) and click Properties.  
4. Click to use the B section like below page. You will need to set IP address for default.  
Example: If RNX-EasyN400’s LAN IP address is 192.168.0.1, make your IP address  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
192.168.0.X where X is a number between 100 and 200. Make sure that the number  
you choose is not in use on the network. Set Subnet mask as 255.255.255.0.  
5. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).  
6. After finish, Click <OK>, Then <OK> on below page  
7. Open your web browser and type in 192.168.0.1 on the address bar. At the login,  
enter your username and password (default username: admin, password: admin).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
8. You will see the configuration homepage under “REPEATER” mode now.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3 Accessing RNX-EasyN400 through Web  
Browser in Router Mode  
1. Make sure your RNX-EasyN400 hardware is properly connected and prepare your  
computer or computer network to connect to the RNX-EasyN400 (refer to the  
Quick Start Guide).  
2. Launch your web browser.  
3. Type "http://192.168.0.1" as the website address. Your computer must be in the  
same subnet in order to access this website address.  
4. Type "admin" (default) for both user name and password, then Click <OK>.  
5. You should now see your RNX-EasyN400 System Status page as shown below in  
AP Router Mode.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.1 Resetting the RNX-EasyN400  
If you forget your password or IP address, or you cannot access the RNX-EasyN400  
through Web Browser, you will need to use the <RESET> button at the back of the  
RNX-EasyN400 to reload the factory-default configuration file. This means that you will  
lose all configurations that you had previously saved, the Username and password will be  
reset to “admin” and the IP address will be reset to “192.168.0.1”.  
3.1.1 Procedure to Use the Reset Button  
1. Make sure the power LED is on.  
2. Press the RESET button for longer than 1 second to restart/reboot the RNX-  
EasyN400.  
3. Press the RESET button for longer than 10 seconds until you see the power LED is  
blinking to set the RNX-EasyN400 back to its factory-default configurations.  
3.2 Navigate RNX-EasyN400  
The following will summarize on how to navigate RNX-EasyN400 in both AP  
Router Mode and Repeater Mode.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.2.1 Navigating RNX-EasyN400 in AP Router Mode  
Click on the side menu selection on System, The picture screen below shows the  
status screen in AP Router Mode.  
3.2.1.1 RNX-EasyN400 Side Menu Description Table – AP Router Mode  
LABEL  
DESCRIPTION  
This shows the RNX-EasyN400’s general device, system and interface status  
information.  
Status  
LAN  
This is where you can configure LAN IP address, subnet mask, also to enable DHCP  
server and IP range.  
System  
DHCP  
Use this screen to view current DHCP client information and to always assign an IP  
address to a MAC address (and host name).  
(For detail,  
please see  
Page 34.)  
Schedule  
Log  
This is where you can set to schedule your wireless internet service  
This is where RNX-EasyN400 stores the event log file based on the process.  
You will see graphical diagrams showing the Bandwidth for WAN and WLAN.  
You can select to have other language.  
Monitor  
Language  
Wizard  
You will be guide to setup your router based on a step by step process to either AP  
(For detail, please see Page  
42.)  
router mode or AP Repeater mode.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Status  
This page shows the current Internet connection type and status.  
Dynamic IP This page is only use when your ISP provides you with below information  
Internet  
(For detail,  
please see  
Page 43.)  
Static IP  
PPPoE  
This page is when your ISP assigns you with a fix IP address to connect.  
This is used when you set your ISP login account name and password in your  
wireless router instead in your modem or your computer.  
This is when your ISP provider provides you by simply dialing in a local point  
provided by your ISP provider.  
PPTP  
Basic  
This is where you can set wireless Radio, Mode, Band, SSID, and Channel.  
This allows you to set the advanced wireless options. These parameters will affect  
your wireless router’s performance, please keep these parameters default unless you  
know the effects that these changes will have on RNX-EasyN400.  
Advanced  
Wireless  
(For detail,  
please see  
Page 46.)  
This part allows you to set your wireless router encryption method to prevent illegal  
access.  
Security  
Filter  
This page gives you control over MAC address control.  
This page allows you to use WPS method to establish connection between a wireless  
clients and the wireless router  
WPS  
You can find out here which Wireless client that is associating with the Wireless  
router.  
Client List  
Policy  
This page is where you can set up the Wireless Access Policy.  
Firewall gives you extensive protection over your wireless Router based on different  
policy.  
Enable  
Advanced  
DMZ  
This section allows you to set whether to let VPN packet to pass through  
DMZ is where you can re-direct your packet based on your needs  
Firewall  
(For detail,  
please see  
Page 61.)  
DoS  
This is the option which provides you prevention from common Hacker attack.  
MAC Filter This allows you to define the traffic type permitted in your LAN based on MAC.  
This allows you to define the traffic type permitted in your LAN based on IP  
IP Filter  
address.  
URL Filter  
This allows you to block certain website by full URL address or just the keyword.  
This is where you set to allows multiple users at your local site to access the Internet  
through a single Public IP Address or multiple Public IP Addresses  
Advanced  
(For detail,  
please see  
Page 68)  
NAT  
Port Mapping allows you to re-direct a particular range of service port numbers  
(from the Internet / WAN Port) to a particular LAN IP address.  
Port map.  
Port fw.  
Use the Port Forwarding (Virtual Server) function when you want different  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
servers/clients in your LAN to handle different service/Internet application type (e.g.  
Email, FTP, Web server etc.) from the Internet.  
In this section you can configure RNX-EasyN400 to support multiple connections  
for these types of applications  
Port tri.  
ALG  
In this section, you can let the selected application to correctly pass through the NAT  
gateway.  
This allows you to discover PCs within your intranet for them to easily access  
through internet.  
UPnP  
QoS lets you classify Internet application traffic by source/destination IP address and  
port number. You can assign priority for each type of application and reserve  
bandwidth for it.  
QoS  
This function allows You to set enable Static Routing to let RNX-EasyN400 forward  
packets by your routing policy  
Routing  
Admin  
You can change the password required to log into the broadband router's system  
web-based management  
Time  
DDNS  
The Time Zone allows your router to reference or base its time on the settings.  
DDNS allows you to map the static domain name to a dynamic IP address.  
You can enable or disable Saving power in WLAN mode  
Tools  
(For detail,  
please see  
Page 78.)  
Power  
Diagnosis  
Firmware  
Back-up  
This page could let you diagnosis your current network status.  
This page allows you to upgrade RNX-EasyN400’s firmware.  
This page allows you to save the current router configurations.  
You can reset the broadband router when system stops responding correctly or stop  
functions.  
Reset  
3.2.2 Navigating RNX-EasyN400 in AP Repeater Mode  
AP Repeater mode has limited function compare to the AP Router mode.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.2.2.1 RNX-EasyN400 Side Menu Description Table – AP Repeater Mode  
LABEL  
DESCRIPTION  
This shows the RNX-EasyN400’s general device, system and interface status  
information.  
Status  
LAN  
This is where you can configure LAN IP address, subnet mask, also to enable DHCP  
server and IP range.  
System  
(For detail,  
please see  
Page 94.)  
Schedule  
Log  
This is where you can set to schedule your wireless internet service  
This is where RNX-EasyN400 stores the event log file based on the process.  
You will see graphical diagrams showing the Bandwidth for WAN and WLAN.  
You can select to have other language.  
Monitor  
Language  
Wizard  
You will be guide to setup your router based on a step by step process to either AP  
(For detail, please see Page  
100.)  
router mode or AP Repeater mode.  
Basic This is where you can set wireless Radio, Mode, Band, SSID, and Channel.  
Wireless  
(For detail,  
please see  
Page 100.)  
Client List You can find out here which Wireless client that is associating with the Wireless  
router.  
Policy  
This page is where you can set up the Wireless Access Policy.  
Tools  
Admin You can change the password required to log into the broadband router's system  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
web-based management  
Time The Time Zone allows your router to reference or base its time on the settings.  
DDNS DDNS allows you to map the static domain name to a dynamic IP address.  
Power You can enable or disable Saving power in WLAN mode  
(For detail,  
please see  
Page 78.)  
Diagnosis This page could let you diagnosis your current network status.  
Firmware This page allows you to upgrade RNX-EasyN400’s firmware.  
Back-up This page allows you to save the current router configurations.  
Reset You can reset the broadband router when system stops responding correctly or stop  
functions.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.3 RNX-EasyN400’s System Page  
3.3.1 Status  
This page allows you to monitor the current status of your router.  
System: You can see the Uptime, hardware information, serial number as well as  
firmware version information.  
WAN Settings: This section displays whether the WAN port is connected to a  
Cable/DSL connection. It also displays RNX-EasyN400’s WAN IP  
address, Subnet Mask, ISP Gateway, MAC address and the Primary  
DNS.  
LAN Settings: This section displays the Broadband router LAN port’s current  
information. It also shows whether the DHCP Server function is  
enabled / disabled.  
WLAN Settings: This section displays the current WLAN configuration settings.  
Wireless configuration details such as SSID, Security settings,  
BSSID, Channel number and mode of operation are briefly shown.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.3.2 LAN  
The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry  
level user, try accessing a website from your browser. If you can access website without a  
glitch, just do not change any of these settings.  
Click <Apply> at the bottom of this screen to save the changed configurations.  
LAN IP  
IP address: 192.168.0.1. It is RNX-EasyN400’s LAN IP address (the “Default Gateway”  
IP address of your LAN clients). It can be changed based on your own  
choice.  
IP Subnet Mask: 255.255.255.0 Specify a Subnet Mask for your LAN segment.  
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is  
enabled, this router will use the spanning tree protocol to  
prevent network loops.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
DHCP Server  
DHCP Server: This can enable or disable the Dynamic Pool setting.  
Lease time: This is the lease time of each assigned IP address.  
Start IP: This is the beginning of the IP pool for DHCP client hosts.  
End IP: This is the end of the IP pool for DHCP client hosts  
Domain name: The Domain Name for the existing or customized network.  
3.3.3 DHCP  
View the current LAN clients which are assigned with an IP Address by the DHCP-  
server. This page shows all DHCP clients (LAN PCs) currently connected to your  
network. The table shows the assigned IP address, MAC address and expiration time for  
each DHCP leased client. Use the <Refresh> button to update the available information.  
Hit <Refresh> to get the updated table.  
You can check “Enable Static DHCP IP“. It is possible to add more static DHCP IPs.  
They are listed in the table “Current Static DHCP Table“. IP address can be deleted at  
will.  
Click <Apply> button to save the changed configuration.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.3.4 Schedule  
This page allows users to set up schedule function for Firewall and Power Saving.  
Edit schedule options to allow configuration of firewall and power savings services to  
take effect. Fill in the schedule and select type of service. Click <Apply> to keep the  
settings.  
The schedule table lists the pre-schedule service-runs. You can select any of the schedule  
record using the check box.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.3.5 Log  
View operation event log. This page shows the current system log of the Broadband  
router. It displays any event occurred after system start up. At the bottom of the page, the  
system log can be saved <Save> to a local file for further processing or the system log  
can be cleared <Clear> or it can be refreshed <Refresh> to get the most updated  
information. When the system is powered down, the system log will be cleared if not  
saved to a local file.  
3.3.6 Monitor  
Show histogram for network connection on WAN, LAN & WLAN. Auto refresh keeps  
information updated frequently.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.3.7 Language  
This Wireless Router support multiple language, You can select your desired language  
here.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.4 RNX-EasyN400’s Wizard Page  
Click Wizard to configure the Broadband Router. Setup wizard will be displayed; check  
that the modem is connected and click <Next>. The details please refer to Setup Wizard  
at <Page 10>.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.5 RNX-EasyN400’s Internet Page  
3.5.1 Status  
This page shows the current Internet connection type and status.  
3.5.2 Dynamic IP  
Use the MAC address when registering for Internet service, and do not change it unless  
required by your ISP. If your ISP used the MAC address of the Ethernet card as an  
identifier, connect only the PC with the registered MAC address to the broadband router  
and click the <Clone MAC Address> button. This will replace the current MAC address  
with the already registered Ethernet card MAC address.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Host Name: This is optional. Please enter only when your ISP provider provides you  
with this information.  
MAC address: The default value is set to the WAN’s physical interface of the broadband  
router.  
3.5.3 Static IP  
If your ISP Provider has assigned a fixed IP address to your internet plan. Please enter the  
assigned IP address, Subnet mask, Default Gateway IP address, and Primary DNS and  
Secondary DNS (if available) provided by your ISP provider.  
3.5.4 Point-to-Point over Ethernet Protocol (PPPoE)  
Login/Password: Enter the PPPoE username and password assigned by your ISP  
Provider.  
Service Name: This is optional.  
Maximum Transmission Unit (MTU): This is the maximum size of the packets.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Authentication type: Please use default <Auto> to auto-detect the best type.  
Type: Enable the Automatic Connection option to automatically re-establish the  
connection when an application attempts to access the Internet again.  
Idle Timeout (Available only under Automatic Connection): This is a maximum  
period of time for which the Internet connection is maintained during  
inactivity. If the connection is inactive longer than the Maximum Idle  
Time that has set, it will be dropped.  
3.5.5 Point-to-Point Tunneling Protocol (PPTP)  
PPTP allows the secure connection over the Internet by simply dialing in a local point  
provided by your ISP provider. The following screen allows client PCs to establish a  
normal PPTP session and provides hassle-free configuration of the PPTP client on each  
client PC.  
Click <Apply> to save configuration and connect to ISP provider.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.6 RNX-EasyN400’s Wireless Page  
3.6.1 Basic  
In this wireless basic setting page, you can set your wireless connection based on Radio,  
Mode, Band, SSID, and Channel.  
Radio: You can turn on/off wireless radio. If wireless Radio is off, you cannot associate  
with AP through wireless.  
Mode: In this device, we support two operation modes under AP Router Mode. If you  
choose AP Router Mode, you can select AP or WDS function in the drop-down  
menu.  
Band: You can select the wireless standards running on your network environment.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
2.4 GHz (B): If all of your clients are 802.11b, select this one.  
2.4 GHz (N): If all of your clients are 802.11n, select this one.  
2.4 GHz (B+G): Either 802.11b or 802.11g wireless devices are in your  
environment.  
2.4 GHz (G): If all of your clients are 802.11g, select this one.  
2.4 GHz (B+G+N): if all 802.11b, 802.11g, or 802.11n wireless devices are in  
your environment.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Enable SSID: We support upto 4 multiple SSIDs in this device. Please select how many  
SSIDs you would like to use in your network environment.  
SSID1~4: ESSID is the name of your wireless network. It might be a unique name to  
identify this wireless device in the Wireless LAN. It is case sensitive and up to 32  
printable characters. You might change the default ESSID for added security.  
Auto Channel: Device will search all valid channels, then select a cleanest channel and  
change to this channel if you enable this function. Depend on this function is  
enabled or not, you will see different items below Auto Channel.  
Channel: If Auto Channel is disabled, you should choose a static channel and AP will  
use this channel to communicate with other clients.  
Check Channel Time: If Auto Channel is enabled, you can choose a period from the  
drop-down menu. AP will change to a clean channel periodically.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.6.2 WDS with AP Router  
WDS (Wireless Distribution System), a system that enables the wireless interconnection  
of access point, allows a wireless network to be extended using multiple APs without a  
wired backbone to link them. Each WDS AP needs same channel and encryption type  
settings.  
MAC address 1~4: Please enter the MAC address(es) of the neighboring APs which  
participate in WDS. You can enter up to 4 devices now.  
Set Security: WDS Security depends on your AP security settings. Note: This does not  
support mixed mode such as WPA-PSK/WPA2-PSK Mixed mode.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.6.3 Advanced  
Advanced function allows you to set your RNX-EasyN400 in advanced wireless options.  
You should not change these parameters unless you know what effect the changes  
will have on RNX-EasyN400.  
Fragment Threshold: This specifies the maximum size of a packet during the  
fragmentation of data to be transmitted. If you set this value too  
low, it will result in bad performance.  
RTS Threshold: When the packet size is smaller than the RTS threshold, the wireless  
router will not use the RTS/CTS mechanism to send this packet.  
Beacon Interval: This is the interval of time that this wireless router broadcasts a beacon.  
A Beacon is used to synchronize the wireless network.  
DTIM Period: Enter a value between 1 and 10 for the Delivery Traffic Indication  
Message (DTIM). A DTIM is a countdown informing clients of the next  
window for listening to broadcast and multicast messages.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Data Rate: The “Data Rate” is the rate that this access point uses to transmit data packets.  
The access point will use the highest possible selected transmission rate to  
transmit the data packets.  
N Data Rate: The “N Data Rate” is the rate that this access point uses to transmit data  
packets for N compliant wireless nodes. Highest to lowest data rate can  
be fixed.  
Channel Bandwidth: This is the range of frequencies that will be used.  
Preamble Type: The “Long Preamble” can provide better wireless LAN compatibility  
while the “Short Preamble” can provide better wireless LAN  
performance.  
CTS Protection: It is recommended to enable the protection mechanism. This  
mechanism can decrease the rate of data collision between 802.11b  
and 802.11g wireless stations. When the protection mode is enabled,  
the throughput of the AP will be a little lower due to a lot of frame-  
network that is transmitted.  
TX Power: This can be set to a bare minimum or maximum power.  
3.6.4 Security  
RNX-EasyN400 provides complete wireless LAN security functions, included are WEP,  
IEEE 802.1x, IEEE 802.1x with WEP, WPA with pre-shared key and WPA with  
RADIUS. With these security functions, you can prevent your wireless LAN from illegal  
access. Please make sure your wireless stations and wireless adapters use the same  
security function, and are setup with the same security key.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
SSID Selection: This broadband router support multiple SSID, you could select and set  
up the wanted SSID.  
Broadcast SSID: If you enabled “Broadcast SSID”, every wireless station located  
within the coverage of the RNX-EasyN400 can discover its signal  
easily.  
WMM: Enabling Wi-Fi Multi-Media can supports QoS for experiencing better audio,  
video and voice in applications.  
Encryption: When you choose to disable encryption, any wireless clients can connect to  
your RNX-EasyN400 without requiring password.  
Enable 802.1x Authentication  
IEEE 802.1x is an authentication protocol. Every user must use a valid account to login  
to RNX-EasyN400 before accessing the wireless LAN. The authentication is processed  
by a RADIUS server. This mode only authenticates users by IEEE 802.1x, but it does not  
encrypt the data during communication.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
WEP Encryption  
When you select 64-bit or 128-bit WEP key, you have to enter WEP keys to encrypt data.  
You can generate the key by yourself and enter it. You can enter four WEP keys and  
select one of them as a default key. Then AP can receive any packet encrypted by one of  
the four keys.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Authentication Type: There are two authentication types: "Open System" and  
"Shared Key". Both AP and wireless client must be  
configured with the same authentication type.  
Key Length: You can select the WEP key length for encryption, 64-bit or 128-bit. The  
larger the key will be the higher level of security is used, but the  
throughput will be lower.  
Key Type: You can select ASCII Characters (alphanumeric format) or Hexadecimal  
Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key.  
Default Key: This is the key used to encrypt data.  
Key1 - Key4: The WEP keys are used to encrypt data transmitted in the wireless network.  
Use the following rules to setup a WEP key on the device.  
64-bit WEP: input 10-digits Hex values (in the "A-F", "a-f" and "0-9" range) or 5-  
digit ASCII character as the encryption keys.  
128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range) or  
13-digit ASCII characters as the encryption keys.  
Click <Apply> at the bottom of the screen to save the above configurations.  
WPA Pre-Shared Key Encryption  
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-  
shared key to authenticate wireless stations and encrypt data during communication. It  
uses TKIP or CCMP (AES) to change the encryption key frequently. So the encryption  
key will not easy to be cracked by hackers. This is the best security available.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
WPA-Radius Encryption  
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use an  
external RADIUS server to authenticate wireless stations and provide the session key to  
encrypt data during communication.  
It uses TKIP or CCMP (AES) to change the encryption key frequently. Press <Apply>  
button when you are done.  
3.6.5 Filter  
This wireless router supports MAC Address Control, which prevents unauthorized  
clients from accessing your wireless network.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Enable wireless access control: Enable the wireless access control function.  
Adding an address into the list  
Enter the "MAC Address" and "Description" of the wireless station to be added and then  
click <Add>. The wireless station will now be added into the "MAC Address Filtering  
Table" below. If you are having any difficulties filling in the fields, just click "Reset" and  
both "MAC Address" and "Description" fields will be cleared.  
Remove an address from the list  
If you want to remove a MAC address from the "MAC Address Filtering Table", select  
the MAC address that you want to remove in the list and then click <Delete Selected>. If  
you want to remove all the MAC addresses from the list, just click the <Delete All>  
button. Click <Reset> will clear your current selections.  
Click <Apply> at the bottom of the screen to save the above configurations.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.6.6 WPS (Wi-Fi Protected Setup)  
WPS is the simplest way to establish a connection between the wireless clients and the  
wireless router. You don’t have to select the encryption mode and fill in a long  
encryption passphrase every time when you try to setup a wireless connection. You only  
need to press a button on both wireless client and wireless router, and the WPS will do  
the rest for you.  
The wireless router supports two types of WPS: WPS via Push Button and WPS via PIN  
code. If you want to use the Push Button, you have to push a specific button on the  
wireless client or in the utility of the wireless client to start the WPS mode, and switch  
the wireless router to WPS mode. You can simply push the WPS button of the wireless  
router, or click the ‘Start to Process’ button in the web configuration interface. If you  
want to use the PIN code, you have to know the PIN code of the wireless client and  
switch it to WPS mode, then fill-in the PIN code of the wireless client through the web  
configuration interface of the wireless router.  
WPS: Check the box to enable WPS function and uncheck it to disable the WPS function.  
WPS Current Status: If the wireless security (encryption) function of this wireless  
router is properly set, you’ll see a “Configured” message here. Otherwise, you’ll see  
“UnConfigured”.  
Self Pin Code: This is the WPS PIN code of the wireless router. You may need this  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
information when connecting to other WPS-enabled wireless devices.  
SSID: This is the network broadcast name (SSID) of RNX-EasyN400.  
Authentication Mode: It shows the active authentication mode for the wireless  
connection.  
Passphrase Key: It shows the passphrase key that is randomly generated by the wireless  
router during the WPS process. You may need this information when using a device  
which doesn’t support WPS.  
WPS via Push Button: Press the button to start the WPS process. RNX-EasyN400 will  
wait for the WPS request from the wireless devices within 2 minutes.  
You can fill-in the PIN code of the wireless device and press the button to start the WPS  
process. RNX-EasyN400 will wait for the WPS request from the wireless device within 2  
minutes.  
3.6.7 Client List  
This WLAN Client Table shows which the Wireless client associate to this Wireless  
Router.  
3.6.8 Policy  
This function gives you abilities to set up the Wireless Access Policy for RNX-EasyN400.  
WAN Connection: Allow Wireless Client on specific SSID to access WAN port.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Communication between Wireless clients: Allow Wireless Client to communicate with  
other Wireless Client on specific SSID.  
Communication between Wireless clients and wired clients: Allow Wireless Client to  
communicate with Wired Client on the switch on specific SSID. Or Wireless Client will allow to  
communicate with other Wireless Client and access WAN port only.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.7 RNX-EasyN400’s Firewall Page  
The Broadband router provides extensive firewall protection by restricting connection  
parameters, thus limiting the risk of hacker attacks, and defending against a wide array of  
common Internet attacks. However, for applications that require unrestricted access to the  
Internet, you can configure a specific client/server as a Demilitarized Zone (DMZ).  
Note: To enable the Firewall settings select Enable and click <Apply>  
3.7.1 Advanced  
You can allow the VPN packets to pass through this Broadband router.  
3.7.2 Demilitarized Zone (DMZ)  
If you have a client PC that cannot run an Internet application (e.g. Games) properly  
behind the NAT firewall, then you can open up the firewall restrictions to unrestricted  
two-way Internet access by defining a DMZ Host. The DMZ function allows you to re-  
direct all packets going to your WAN port IP address to a particular IP address in your  
LAN. The difference between the virtual server and the DMZ function is that the virtual  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
server re-directs a particular service/Internet application (e.g. FTP, websites) to a  
particular LAN client/server, whereas DMZ re-directs all packets (regardless of services)  
from your WAN IP address to a particular LAN client/server.  
Enable DMZ: Enable/disable DMZ  
LAN IP Address: Fill-in the IP address of a particular host in your LAN Network or  
select a PC from the list on the right that will receive all the packets  
originally from the WAN port/Public IP address.  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.7.3 Denial of Service (DoS)  
RNX-EasyN400's firewall can block common hacker attacks, including Denial of Service,  
Ping of Death, Port Scan and Sync Flood. If Internet attacks occur, RNX-EasyN400 can  
also log the events.  
Ping of Death: Protections from Ping of Death attack.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Discard Ping From WAN: RNX-EasyN400’s WAN port will not respond to any Ping  
requests  
Port Scan: Protects RNX-EasyN400 from Port Scans.  
Sync Flood: Protects RNX-EasyN400 from Sync Flood attack.  
3.7.4 MAC Filter  
If you want to restrict users from accessing certain Internet applications / services (e.g.  
Internet websites, email, FTP etc.), and then this is the place to set that configuration.  
MAC Filter allows users to define the traffic type permitted in your LAN. You can  
control which PC client can have access to these services.  
Enable MAC Filtering: Check to enable or disable MAC Filtering.  
Deny: If you select “Deny” then all clients will be allowed to access Internet except the  
clients in the list below.  
Allow: If you select “Allow” then all clients will be denied to access Internet except the  
PCs in the list below.  
Add PC MAC Address  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Fill in “LAN MAC Address” and <Description> of the PC that is allowed / denied to  
access the Internet, and then click <Add>. If you find any typo before adding it and want  
to retype again, just click <Reset> and the fields will be cleared.  
Remove PC MAC Address  
If you want to remove some PC from the "MAC Filtering Table", select the PC you  
want to remove in the table and then click <Delete Selected>. If you want to remove all  
PCs from the table, just click the <Delete All> button. If you want to clear the selection  
and re-select again, just click <Reset>.  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.7.5 IP Filter  
Enable IP Filtering: Check to enable or uncheck to disable IP Filtering.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Deny: If you select “Deny” then all clients will be allowed to access Internet except for  
the clients in the list below.  
Allow: If you select “Allow” then all clients will be denied to access Internet except for  
the PCs in the list below.  
Add PC IP Address  
You can click <Add> PC to add an access control rule for users by an IP address or IP  
address range.  
Remove PC IP Address  
If you want to remove some PC IP from the <IP Filtering Table>, select the PC you  
want to remove in the table and then click <Delete Selected>. If you want to remove all  
PCs from the table, just click the <Delete All> button.  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.7.6 URL Filter  
You can block access to some Web sites from particular PCs by entering a full URL  
address or just keywords of the Web site.  
Enable URL Blocking: Enable or disable URL Blocking  
Add URL Keyword  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Fill in “URL/Keyword” and then click <Add>. You can enter the full URL address or the  
keyword of the web site you want to block. If you happen to make a mistake and want to  
retype again, just click "Reset" and the field will be cleared.  
Remove URL Keyword  
If you want to remove some URL keywords from the "Current URL Blocking Table",  
select the URL keyword you want to remove in the table and then click <Delete  
Selected>.  
If you want remove all URL keywords from the table, click <Delete All> button. If you  
want to clear the selection and re-select again, just click <Reset>.  
Click <Apply> at the bottom of the screen to save the above configurations  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.8 RNX-EasyN400’s Advanced Page  
3.8.1 Network Address Translation (NAT)  
Network Address Translation (NAT) allows multiple users at your local site to access the  
Internet through a single Public IP Address or multiple Public IP Addresses. NAT  
provides Firewall protection from hacker attacks and has the flexibility to allow you to  
map Private IP Addresses to Public IP Addresses for key services such as Websites and  
FTP. Select Disable to disable the NAT function.  
3.8.2 Port Mapping  
Port Mapping allows you to re-direct a particular range of service port numbers (from the  
Internet / WAN Port) to a particular LAN IP address. It helps you to host servers behind  
RNX-EasyN400 NAT firewall.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Enable Port Mapping: Enable or disable port mapping function.  
Description: description of this setting.  
Local IP: This is the local IP of the server behind the NAT firewall.  
Protocol: This is the protocol type to be forwarded. You can choose to forward “TCP”  
or “UDP” packets only, or select “BOTH” to forward both “TCP” and “UDP”  
packets.  
Port Range: The range of ports to be forward to the private IP.  
Add Port Mapping  
Fill in the "Local IP", “Protocol”, “Port Range” and "Description" of the setting to be  
added and then click "Add". Then this Port Mapping setting will be added into the  
"Current Port Mapping Table" below. If you find any typo before adding it and want to  
retype again, just click <Reset> and the fields will be cleared.  
Remove Port Mapping  
If you want to remove a Port Mapping setting from the "Current Port Mapping Table",  
select the Port Mapping setting that you want to remove in the table and then click  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
D<Delete Selected>. If you want to remove all Port Mapping settings from the table,  
click <Delete All> button. Click <Reset> will clear your current selections.  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.8.3 Port Forwarding (Virtual Server)  
Use the Port Forwarding (Virtual Server) function when you want different  
servers/clients in your LAN to handle different service/Internet application type (e.g.  
Email, FTP, Web server etc.) from the Internet. Computers use numbers called port  
numbers to recognize a particular service/Internet application type. The Virtual Server  
allows you to re-direct a particular service port number (from the Internet/WAN Port) to  
a particular LAN private IP address (See Glossary for an explanation on Port number).  
Enable Port Forwarding: Enable or disable Port Forwarding.  
Description: The description of this setting.  
Local IP / Local Port: This is the LAN Client/Host IP address and Port number that the  
Public Port number packet will be sent to.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Protocol: Select the port number protocol type (TCP, UDP or both). If you are unsure,  
then leave it to the default “both” setting. Public Port enters the service  
(service/Internet application) port number from the Internet that will be re-  
directed to the above Private IP address host in your LAN Network.  
Public Port: Port number will be changed to Local Port when the packet enters your  
LAN Network.  
Add Port Forwarding  
Fill in the "Description" , "Local IP", "Local Port", "Protocol" and “Public Port” of  
the setting to be added and then click <Add> button. Then this Virtual Server setting will  
be added into the "Current Port Forwarding Table" below. If you find any typo before  
adding it and want to retype again, just click <Reset> and the fields will be cleared.  
Remove Port Forwarding  
If you want to remove Port Forwarding settings from the "Current Port Forwarding  
Table", select the Port Forwarding settings you want to remove in the table and then  
click "Delete Selected". If you want to remove all Port Forwarding settings from the  
table, just click the <Delete All> button. Click <Reset> will clear your current selections.  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.8.4 Port Triggering (Special Applications)  
Some applications require multiple connections, such as Internet games, video  
Conferencing, Internet telephony and others. In this section you can configure RNX-  
EasyN400 to support multiple connections for these types of applications.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Enable Trigger Port: Enable or disable the Port Trigger function.  
Trigger Port: This is the outgoing (Outbound) range of port numbers for this particular  
application.  
Trigger Type: Select whether the outbound port protocol is “TCP”, “UDP” or “BOTH”.  
Public Port: Enter the In-coming (Inbound) port or port range for this type of application  
(e.g. 2300-2400, 47624)  
Public Type: Select the Inbound port protocol type: “TCP”, “UDP” or “BOTH”  
Popular Applications: This section lists the more popular applications that require  
multiple connections. Select an application from the Popular  
Applications selection. Once you have selected an application,  
select a location (1-5) in the “Add” selection box and then click  
the <Add> button. This will automatically list the Public Ports  
required for this popular application in the location (1-5) you  
specified.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Add Port Triggering  
Fill in the "Trigger Port", "Trigger Type”, “Public Port”, "Public Type", "Public  
Port" and "Description" of the setting to be added and then Click <Add>. The Port  
Triggering setting will be added into the "Current Trigger-Port Table" below. If you  
happen to make a mistake, just click <Reset> and the fields will be cleared.  
Remove Port Triggering  
If you want to remove Special Application settings from the "Current Trigger-Port  
Table", select the Port Triggering settings you want to remove in the table and then click  
<Delete Selected>. If you want remove all Port Triggering settings from the table, just  
click the <Delete All> button. Click <Reset> will clear your current selections.  
3.8.5 Application Layer Gateway (ALG)  
You can manually select the applications that need ALG support. RNX-EasyN400 will  
let the selected application to correctly pass through the NAT gateway.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.8.6 UPnP  
With UPnP, all PCs in you Intranet will discover this router automatically. So, you don’t  
have to configure your PC and it can easily access the Internet through this router.  
Enable/Disable UPnP: You can enable or Disable the UPnP feature here. After you  
enable the UPnP feature, all client systems that support UPnP,  
like Windows XP, can discover this router automatically and  
access the Internet through this router without having to  
configure anything. The NAT Traversal function provided by  
UPnP can let applications that support UPnP connect to the  
internet without having to configure the virtual server sections.  
3.8.7 Quality of Service (QoS)  
QoS can let you classify Internet application traffic by source/destination IP address and  
port number. You can assign priority for each type of application and reserve bandwidth  
for it. The packets of applications with higher priority will always go first. Lower priority  
applications will get bandwidth after higher priority applications get enough bandwidth.  
This can let you have a better experience in using critical real time services like Internet  
phone, video conference …etc. All the applications not specified by you are classified as  
rule “Others”.  
Priority Queue  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
This can put the packets of specific protocols in High/Low Queue. The packets in High  
Queue will process first.  
Unlimited Priority Queue: The LAN IP address will not be bounded in the QoS  
limitation.  
High/Low Priority Queue: This can put the packets in the protocol and port range to  
High/Low QoS Queue.  
Bandwidth Allocation:  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
This can reserve / limit the throughput of specific protocols and port range. You can set  
the upper bound and Lower bound.  
Type: Specify the direction of packets. Upload, download or both.  
IP range: Specify the IP address range. You could also fill one IP address  
Protocol: Specify the packet type. The default ALL will put all packets in the QoS  
priority Queue.  
Port range: Specify the Port range. You could also fill one Port.  
Policy: Specify the policy the QoS, Min option will reserve the selected data rate in QoS  
queue. Max option will limit the selected data rate in QoS queue.  
Rate: The data rate of QoS queue.  
Disabled: This could turn off QoS feature.  
3.8.8 Routing  
You can set enable Static Routing to let RNX-EasyN400 forward packets by your routing  
policy. To Start, first you will need to disable NAT.  
Upon disable the NAT function. You will see below page appear.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Destination LAN IP: Specify the destination LAN IP address of static routing rule.  
Subnet Mask: Specify the Subnet Mask of static routing rule.  
Default Gateway: Specify the default gateway of static routing rule.  
Hops: Specify the Max Hops number of static routing rule.  
Interface: Specify the Interface of static routing rule.  
3.9 RNX-EasyN400’s Tools Page  
3.9.1 Admin and Remote Management  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
You can change the password required to log into the broadband router's system web-  
based management. By default, the password is: admin. Passwords can contain 0 to 12  
alphanumeric characters, and are case sensitive.  
Old Password: Fill in the current password to allow changing to a new password.  
New Password: Enter your new password and type it again in Repeat New Password  
for verification purposes  
Remote management  
This allows you to designate a host in the Internet the ability to configure the Broadband  
router from a remote site. Enter the designated host IP Address in the Host IP Address  
field.  
However, please note that Remote Management has its limitation, it will not work when:  
1. Remote Management has been disabled in one of the remote management screens.  
2. The IP address in the Secured Client IP Address field does not match the client IP  
address. If it does not match, RNX-EasyN400 will not premit the connection of the  
session.  
3. There is a firewall rule that blocks you from access.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Host Address: This is the IP address of the host in the Internet that will have  
management/configuration access to the Broadband router from a remote  
site. If the Host Address is left 0.0.0.0 this means anyone can access  
RNX-EasyN400’s web-based configuration from a remote location,  
providing they know the password.  
Port: The port number of the remote management web interface.  
Enabled: Check to enable the remote management function.  
Click <Apply> at the bottom of the screen to save the above configurations.  
For details on how to set Remote Management, please refer to troubleshooting in  
Appendix.  
3.9.2 Time  
The Time Zone allows your router to reference or base its time on the settings configured  
here, which will affect functions such as Log entries and Firewall settings.  
Time Setup:  
Synchronize with the NTP server  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Time Zone: Select the time zone of the country you are currently in. RNX-EasyN400  
will set its time based on your selection.  
NTP Time Server: RNX-EasyN400 can set up external NTP Time Server.  
Daylight Savings: RNX-EasyN400 can also take Daylight Savings into account. If you  
wish to use this function, you must select the Daylight Savings Time  
period and check/tick the enable box to enable your daylight saving  
configuration.  
Click <Apply> at the bottom of the screen to save the above configurations.  
`Synchronize with PC: You could synchronize timer with your Local PC time.  
PC Date and Time: This field would display the PC date and time.  
Daylight Savings: RNX-EasyN400 can also take Daylight Savings into account. If you  
wish to use this function, you must select the Daylight Savings  
Time period and check/tick the enable box to enable your daylight  
saving configuration.  
Click <Apply> at the bottom of the screen to save the above configurations.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.9.3 DDNS  
DDNS allows you to map the static domain name to a dynamic IP address. You must get  
an account, password and your static domain name from the DDNS service providers.  
This router supports DynDNS, TZO and other common DDNS service providers.  
Enable/Disable DDNS: Enable or disable the DDNS function of this router  
Server Address: Select a DDNS service provider  
Host Name: Fill in your static domain name that uses DDNS.  
Username: The account that your DDNS service provider assigned to you.  
Password: The password you set for the DDNS service account above  
Click <Apply> at the bottom of the screen to save the above configurations.  
3.9.4 Power  
Saving power in WLAN mode can be enabled / disabled in this page.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
3.9.5 Diagnosis  
This page could let you diagnosis your current network status. By entering any website  
address, you will know if the internet connection is connected.  
3.9.6 Firmware  
This page allows you to upgrade RNX-EasyN400’s firmware. To upgrade the firmware  
of your Broadband router, you need to download the firmware file to your local hard disk,  
and enter that file name and path in the appropriate field on this page. You can also use  
the Browse button to find the firmware file on your PC.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Once you’ve selected the new firmware file, click <Apply> at the bottom of the screen to  
start the upgrade process  
Caution:  
•
To upgrade firmware, please make sure the wireless connection is disabled and the  
computer is connected with a cable to the router.  
•
Also make sure the computer and the wireless router are both plug-in with power  
adapter during this whole process  
Step 1 Download the latest firmware from the Rosewill website at www.rosewill.com.  
Save it on the Desktop of your PC. Then unzip the file. (Using RNX-N4PS as an  
example)  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Step 2 Log on to the management web page of the AP. By default, the management IP is  
http://192.168.0.1 , and the user name is “admin”; password is “admin”  
.
Step 3 Click <Tools> and <Firmware>, then Click <Browse>.  
Step 4 Select the latest firmware that you saved and unzipped onto your computer.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Step 5 Click <Apply> button.  
Step 6 Click <OK> button for writing the latest firmware to your router.  
Step 7 Click <OK> button.  
3.9.7 Back-up  
This page allows you to save the current router configurations. When you save the  
configurations, you also can re-load the saved configurations into RNX-EasyN400  
through the Restore Settings. If extreme problems occur you can use the Restore to  
Factory Defaults to set all configurations to its original default settings.  
Backup Settings: This can save the Broadband router current configuration to a file  
named "config.dlf" on your PC. You can also use the <Upload>  
button to restore the saved configuration to the Broadband router.  
Alternatively, you can use the "Restore to Factory Defaults" tool to  
force the Broadband router to perform a power reset and restore the  
original factory settings.  
3.9.8 Reset  
You can reset the broadband router when system stops responding correctly or stop  
functions.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
4 Repeater Mode  
Repeater mode has limited settings compared to the AP mode. Choose “Repeater mode”  
on the top right corner of the configuration page.  
System will counting down and restarts automatically.  
Before your computer connected to the RNX-EasyN400 in AP Repeater Mode, you will  
need to manually setup your computer’s IP address, in order to login to the web configure  
page.  
In Windows XP:  
1. Click on Start > Control Panel > Network and Internet Connections > Network  
connections.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
2. Right-click on the Local Area Connection which represents your network card and  
selects Properties.  
3. Highlight Internet Protocol (TCP/IP) and click Properties.  
4. Click to use the B section like below page. You will need to set IP address for  
default. Example: If RNX-EasyN400’s LAN IP address is 192.168.0.1, make your  
IP address 192.168.0.X (X is a number between 100 and 200). Make sure that the  
number you choose is not in use on the network. Set Subnet mask as 255.255.255.0.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
5. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).  
6. After finish, Click <OK>, Then <OK> on below page  
7. Open your web browser and type in 192.168.0.1 on the address bar. At the login,  
enter your username and password (default username: admin, password: admin).  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
8. You will see the configuration homepage under “Repeater mode” now.  
Note: After finishing co figurate your RNX-EasyN400 in Repeater mode, please do  
remember to adjust your computer’s IP address function back to DHCP function.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
4.1 RNX-EasyN400 in Repeater Mode’s System page  
4.1.1 Status  
This page allows you to monitor the current status of your RNX-EasyN400 in Repeater  
mode.  
System: You can see the Uptime, hardware information, serial number as well as  
firmware version information.  
LAN Settings: This section displays the Broadband router LAN port’s current  
information. It also shows whether the DHCP Server function is  
enabled / disabled.  
WLAN Settings: This section displays the current WLAN configuration settings.  
Wireless configuration details such as SSID, Security settings,  
BSSID, Channel number and mode of operation are briefly shown.  
4.1.2 LAN  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry  
level user, try accessing a website from your browser. If you can access website without a  
glitch, just do not change any of these settings.  
Click <Apply> at the bottom of this screen to save the changed configurations.  
IP address: This is RNX-EasyN400’s LAN IP address (Your LAN clients default  
gateway IP address). It can be changed based on your own choice.  
IP Subnet Mask: Specify a Subnet Mask for your LAN segment.  
Default Gateway: This is the IP address of your host router.  
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is  
enabled, this router will use the spanning tree protocol to  
prevent network loops.  
4.1.3 Schedule  
Add schedule, edit schedule options allow configuration of power savings services. Fill in  
the schedule and select type of service. Click <Apply> to implement the settings.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
The schedule table lists the pre-schedule service-runs. You can select any of them using  
the check box.  
4.1.4 Log  
View operation log of RNX-EasyN400. This page shows the current system log of the  
Broadband router. It displays any event occurred after system start up. At the bottom of  
the page, the system log can be saved <Save> to a local file for further processing or  
the system log can be cleared <Clear> or it can be refreshed <Refresh> to get the most  
updated information. When the system is powered down, the system log will disappear  
if not saved to a local file.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
4.1.5 Monitor  
Show the network packets histogram for network connection on WAN, LAN & WLAN.  
Auto refresh keeps information updated frequently.  
4.1.6 Language  
This Wireless Router support multiple language of web pages, you could select your  
native language here.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
4.2 RNX-EasyN400 in Repeater Mode’s Wizard page  
Click Wizard to configure the Broadband Router. Setup wizard will be displayed; check  
that the modem is connected and click <Next>. The details please refer to Setup Wizard  
at <Page 10>.  
4.3 RNX-EasyN400 in Repeater Mode’s Wireless Page  
This is where you select the Wireless Router that you want RNX-EasyN400 to receive  
from and broadcast. RNX-EasyN400 allows you to add multiple SSIDs to give you more  
freedom to assign who can connect to which SSID.  
When multiple SSIDs are added, you will see more options for you to manage your  
RNX-EasyN400 in Repeater Mode.  
You will see the below page shown as RNX-EasyN400 in Repeater Mode that has only 1  
SSID enable.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
You will see that when add SSID # 2 and SSID #3, you have “Security” in option to set  
up for your SSID #2 and SSID #3.  
Radio: This is where you set your RNX-EasyN400 to broadcast the signal from your  
wireless router.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Mode: This is predefined as Repeater.  
Band: Depending on the wireless router you want to connect to, you will need to adjust  
the band accordingly to the wireless router.  
Enable SSID #: By default, RNX-EasyN400 has 1 set of SSID in Repeater mode.  
However, you can add two more SSIDs for your designate groups to link to.  
SSID 1: This is the default SSID #. It will automatically adjust when you select your  
desired signal to broadcast.  
SSID 2: When you add the second SSID. You will see this option where you can enter  
your desired SSID 2 name.  
SSID 3: When you add the third SSID. You will see this option where you can enter your  
desired SSID 3 name.  
Site Survey: Once click this option, you will see a popup page which scan through your  
local wireless signal. Below is the popup sample page which you will see.  
Once you selected the SSID which you want to connect to, you will be ask  
for the password depending on your setting in the wireless router you want  
to connect to.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Once selected your desired SSID connection, Click <Connect>, then you will see below  
page popup.  
Depending on the wireless signal that you want to connect to, RNX-EasyN400 will  
automatically configures to the current Encryption based on WEP, WPA and WPA2.  
For example, under the encryption type of WPA/PSK and WPA2/PSK, you will see:  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
All you have to do is to enter the password of the wireless router you want to connect  
with. Then Click <Apply>  
You will see the RNX-EasyN400 start countdown and below page appear:  
Once complete, if successful, you should be the below message:  
Your RNX-EasyN400 is now ready to broadcast your wireless router’s signal and extend  
your wireless router’s range.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
5 PC Network Adapter setup (Under Windows XP)  
•
Enter [Start Menu] Æ select [Control panel] Æ select [Network].  
•
Select [Local Area Connection]) icon=>select [properties]  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
•
Select [Internet Protocol (TCP/IP)] =>Click [Properties].  
•
Select the [General] tab and Click “a” on both selections.  
a. RNX-EasyN400 supports [DHCP] function, please select both [Obtain an  
IP address automatically] and [Obtain DNS server address automatically].  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Appendix A – Product Specification  
Hardware Feature  
Dimensions  
125mm (L) x 98mm (W) x 25mm (H)  
WAN: One 10/100 Fast Ethernet RJ-45  
LAN: Four 10/100 Fast Ethernet RJ-45  
Reset button  
Physical Interface  
Power Jack  
WPS button (WiFi Protected Setup)  
Power Status  
WAN (Internet connection)  
10/100Mbps LAN1~LAN4  
WLAN (Wireless connection)  
LEDs Status  
Power Supply: 200 to 240 VDC ± 10％ (ETSI) 100 to 120 VDC ± 10％ (FCC)  
Power Requirements  
Device: 12V/1A  
The reset button is built into the rear panel. Use this button to restore the RNX-  
EasyN400 to its factory default settings. Press for 1 second to restart the device. Press  
for 10 seconds to restore to factory default settings.  
Reset Button  
WPS button  
Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled  
wireless connection.  
Temperature Range  
0 to 45° C - Operating, -10 to 70 ° C – Storage  
Environment  
Humidity (non-condensing)  
15%～95% typical  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Appendix B – Troubleshooting  
Q: How do I configue to set up Remote Management?  
A: Depending on your internet connect plans, your methods of setting up remote  
management will be different.  
1. After Login to the RNX-EasyN400 management page, Click 「Tools」, then  
「Admin」. We should see as below.  
2. Host Address is referring a set of IP address that represent the designated  
computer in your network which you allow to access to your wireless router. But  
once you enter a set IP, you won't be able to link to your wireless router from any other  
computer except the computer that has the correct IP address when you are login  
within your network.  
3. In order to access from different remote places (eg. Remote connect to your RNX-  
EasyN400 at home from your office), we will need to leave Host Address blank.  
4. Type in 8080 or 80 or 8888 in <port>; these are the numbers normally won't be use by  
other applications or you can input your desired port number, however you will need to  
make sure that the port number you use wasn’t use by other applications. Click  
<Enable>; then <Apply>  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
5. After RNX-EasyN400 finish reset, please Click “System”, then from “Status” page  
below you will see under “WAN Settings” which shows your External IP address  
(where has been red circled under “WAN Settings”).  
6. External IP Address is the IP address which assign by your ISP provider to your  
service. When under dynamic IP plans, this IP address should remain the same unless  
your ISP resets your external IP address or when you have reboot your Modem.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
7. We suggest that you change the default login name and password to your desired  
login name and password which are difficult for others to guess or hack. (Rosewill  
default login/Password is admin)  
8. Use above picture as an example. The External IP address is 10.16.196.62. The port  
number that we set is as 8080 or 80 or 8888.  
9. Then to remote access to your wireless router: - From a different location, type in  
「10.16.196.62:8080」 or 「10.16.196.62:80」 or 「10.16.196.62:8888」 in the  
address bar of the Web Browser. - You should be able to see the below login page.  
Once entered your  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Q: What is the IP address of my RNX-EasyN400?  
A: The default IP address is 192.168.0.1.  
However If you changed the IP address and have forgotten it, you might get the IP  
address of RNX-EasyN400 by looking up the IP address of the default gateway for your  
computer.  
To do this in most Windows computers, click Start > Run, Type “cmd”, then enter  
“ipconfig”. The IP address of the Default Gateway might be the IP address of the RNX-  
EasyN400 (depending on the network).  
If your RNX-EasyN400 is a DHCP client, you can find your IP address from the DHCP  
server. This information is only available from the DHCP server which allocates IP  
addresses on your network. Find this information directly from the DHCP server or  
contact your system administrator for more information.  
Or you will need to reset your RNX-EasyN400 to change all settings back to their default.  
This means your current settings are lost. See Section 3.1 on page 27 for information on  
resetting your RNX-EasyN400.  
Q: I don’t remember my password.  
A: The default password is admin.  
If this doesn’t work, you have to reset your RNX-EasyN400, please refer to Section 3.1  
on Page 27.  
Q: I cannot see or access the Login screen in the Web Configurator.  
A: Make sure you are using the correct IP address.  
•
•
The default IP address is 192.168.0.1.  
If you changed the default IP address, please use your changed IP address.  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
•
•
•
•
If you changed the IP address and have forgotten it, see the troubleshooting on how  
to find the IP address of your RNX-EasyN400.  
Make sure your Internet browser does not block pop-up windows and has JavaScripts  
and Java enabled.  
Reset the device to its factory defaults, and try to access the RNX-EasyN400 with the  
default IP address  
If the problem continues, contact the network administrator or Rosewill.  
Q: I can see the Login screen, but I cannot log in to the RNX-EasyN400.  
A: Make sure you have entered the password correctly. The default password is admin.  
This field is case-sensitive, so make sure [Caps Lock] is not on.  
•
•
You cannot log in to the Web Configurator while someone is using Telnet to access  
the RNX-EasyN400. Log out of the RNX-EasyN400 in the other session, or ask the  
person who is logged in to log out.  
This can happen when you fail to log out properly from your last session. Try logging  
in again after 5 minutes.  
•
•
Disconnect and re-connect the power adaptor or cord to the RNX-EasyN400.  
If this does not work, you have to reset the device to its factory defaults.  
Q: I cannot access the Internet.  
A: Check the hardware connections, and make sure the LEDs are behaving as expected.  
•
Please follow the steps below to make sure the RNX-EasyN400 is connected with the  
modem.  
„
„
„
„
Configure your settings correctly i.e. DHCP, SSID, Password.  
Save your settings.  
Reboot your Rosewill Router and your ADSL/Cable modem.  
If rebooting your ADSL/Cable modem doesn’t work, please call your  
ADSL/Cable provider and ask them to reset and restart your ADSL/Cable  
Modem. (This is due to some newer ADSL/Cable modems are now equipped  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
with a battery for when power is lost, i.e. Time Warner Cable Modems, will  
keep the modem on and connected. Due to the ADSL/Cable modem not  
assigning the correct DHCP information, the Rosewill Routers can not work  
correctly and assign a DHCP to the client computers.)  
•
•
Make sure you entered your ISP account information correctly in the wizard. These  
fields are case-sensitive, so make sure [Caps Lock] is not on.  
If you are trying to access the Internet wirelessly, make sure the wireless settings in  
the wireless client are the same as the settings in the Router Mode.  
•
Follow the process of Section 1.7 on Page 7. Use cable to connect your  
RNX-EasyN400, use web browser to link to RNX-EasyN400.  
If your RNX-EasyN400 is being set as a repeater, you will need to  
manually set your computer’s IP address. Please follow the steps in  
Section 2.3.3 Connecting to RNX-EasyN400 in AP Repeater Mode on  
Page 22.  
•
•
If the problem continues, contact your ISP.  
Q: I cannot access the Internet anymore. I had access to the Internet (with the RNX-  
EasyN400), but my Internet connection is not available anymore..  
A: Check the hardware connections, and make sure the LEDs are behaving as expected.  
•
•
Reboot the RNX-EasyN400.  
If the problem continues, contact your ISP.  
Q: My internet connection is slow.  
A: There might be a lot of traffic on the network. Look at the LEDs, to see if RNX-  
EasyN400 is transferring and receiving a lot of information. Try closing some programs  
that use the Internet, especially peer-to-peer applications.  
•
Check the signal strength. If the signal strength is low, try moving the RNX-  
EasyN400 closer to the AP if possible, and look around to see if there are any devices  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
that might be interfering with the wireless network (for example, microwaves, other  
wireless networks, and so on).  
•
•
Reboot the RNX-EasyN400.  
Please update the Wireless Adapter’s Firmware of your Notebook and PC to the latest  
version to ensure the best connection.  
•
•
You may consider to activate Qos function, please see section 3.8.7 Quality of  
Service (QoS) on Page 69.  
If problem remainds, please contact the network administrator or Rosewill.  
Q: I cannot access the RNX-EasyN400 or ping any computer from the WLAN (wireless  
AP or router).  
A: Make sure the wireless LAN is enabled on the RNX-EasyN400  
•
•
•
Make sure the wireless adapter on the wireless station is working properly.  
Make sure your Notebook’s wireless adapter has the most current firmware.  
Make sure the wireless adapter installed on your computer is IEEE 802.11  
compatible and supports the same wireless standard as the RNX-EasyN400.  
Make sure your computer (with a wireless adapter installed) is within the  
transmission range of the RNX-EasyN400.  
•
•
•
•
Check that both the RNX-EasyN400 and your wireless station are using the same  
wireless and wireless security settings.  
Make sure traffic between the WLAN and the LAN is not blocked by the firewall on  
the RNX-EasyN400.  
Make sure you allow the RNX-EasyN400 to be remotely accessed through the  
WLAN interface. Check your remote management settings.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Appendix C – FCC Interference Statement  
Federal Communication Commission Interference Statement  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one of the following measures:  
z
z
z
z
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could  
void the user's authority to operate this equipment.  
IMPORTANT NOTE:  
FCC Radiation Exposure Statement:  
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This  
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  
We declare that the product is limited in CH1~CH11 by specified firmware controlled in the USA.  
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  
Requirements for indoor vs. outdoor operation, license requirements and allowed channels of operation apply in  
some countries as described below:  
. In Italy the end-user must apply for a license from the national spectrum authority to operate this device outdoors.  
. In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz band: Channel 13.  
. In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels 1 - 7.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Italian:  
In alcuni Paesi si applicano i requisiti per il funzionamento in interni-esterni, i requisiti di licenza e i canali  
consentiti, come descritto si seguito:  
- In Italia l'utente finale deve richiedere una licenza all'Autorità competente nazionale per il funzionamento in  
esterni del device.  
Dutch:  
Vereisten voor werking indoor versus outdoor, licentie vereisten en toegestane kanalen voor gebruik zijn van  
toepassing in bepaalde landen zoals hieronder beschreven.  
- In Belgïe is outdoor gebruik enkel toegestaan gebruik makend van de 2.46 - 2.4835 GHz band: Kanaal13.  
French:  
Conditions requises pour des installations intérieures ou extérieures, licences requises et canaux autorisés dans  
certains pays comme décrits ci-dessous:  
- En Belgique, l'installation extérieure est seulement autorisée sur la bande 2.46 - 2.4835 GHz:: Canal 13  
- En France, l'installation extérieure est seulement autorisée sur la bande 2.4 2.454 GHz : Canal 1-7  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless RouterRNX-EasyN400  
User Manual  
Appendix D – IC Interference Statement  
Industry Canada statement:  
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
IMPORTANT NOTE:  
Radiation Exposure Statement:  
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This  
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  
This device has been designed to operate with an antenna having a maximum gain of 2 dBi. Antenna having a  
higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.  
Thank you for purchasing a quality Rosewill Product.  
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games 76100 User Guide
Radio Shack Clock Radio CHRONOMATIC 312 User Guide
Radio Shack Cordless Telephone ET 685 User Guide
Roberts Radio MP3 Docking Station MP SOUND 43 User Guide
Rosewill Server RSV Z4000 User Guide
Ryobi Saw CSB142LZ User Guide
Samsung Camcorder Accessories VP D26 User Guide
Samsung Cell Phone Genoa User Guide
Samsung CRT Television CL21K30M16 User Guide
Sanyo Computer Monitor CE42LM5R User Guide