O W N ER’S MAN UAL
Thank you for purchasing the Roland Bi-Amp Monitor DS-50A.
Before using this unit, carefully read the sections entitled: “IMPORTANT
SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3), and
“IMPORTANT NOTES” (p. 5). These sections provide important information
concerning the proper operation of the unit. Additionally, in order to feel
assured that you have gained a good grasp of every feature provided by your
new unit, this manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
Ma in Fe a tu re s
In Pu rsu it o f Hig h So u n d Q u a lity
The DS-50A powered monitor uses a two-way, bi-amplifier design to
achieve high sound quality.
Amplifier
20W
The monitor features a 120-mm LF Driver and a 19-mm soft-dome HF
Amplifier
30W
Driver as speakers. The amplification includes 30-watt and 20-watt
amplifiers designed to achieve high sound quality.
Dig ita l In p u t
In addition to XLR and TRS phone analog input, the DS-50A is provided with digital input connectors
(coaxial and optical) that support 96 kHz sample rate and 24-bit digital audio.
Digitally input signals are reproduced faithfully through 24-bit D/A conversion, thus preventing noise
or a drop in sound quality.
You can use the monitors with a wide variety of equipment and applications through selective use of
the analog and digital settings.
Re p ro d u ctio n o f a Va rie ty o f Sp e a k e r So u n d s
(co m b in a tio n w ith th e VS o r VM)
By connecting the Roland V-Studio (VS series) or V-Mixer (VM series) to the DS-50A and using
Speaker Modeling Function of VS or VM, the DS-50A can reproduce the
sounds from a wide range of speakers, ranging from the professional
monitors from other manufacturers to the speaker in a small household
television set.
You can use the DS-50A in combination with the V-Studio or V-Mixer to
simulate the sound checks at mixdown, which conventionally have required
switching between multiple pairs of monitors set up to compare the sound.
* Please be aware that not all VS/VM series units are capable of providing
speaker modeling. Before making your purchase, you should confirm that
the unit you are considering does indeed provide the features you desire.
Copyright © 2000 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
The
symbol alerts the user to important instructions
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
•
Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
..........................................................................................................
•
Do not excessively twist or bend the power cord,
nor place heavy objects on it. Doing so can damage
the cord, producing severed elements and short
circuits. Damaged cords are fire and shock
hazards!
•
Do not open or perform any internal modifications
on the unit.
..........................................................................................................
..........................................................................................................
•
Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
•
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be
capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long
period of time at a high volume level, or at a level
that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
distributor, as listed on the "Information" page.
..........................................................................................................
•
Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
..........................................................................................................
•
Do not allow any objects (e.g., flammable material,
coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.
• Damp (e.g., baths, washrooms, on wet floors); or
are
..........................................................................................................
• Humid; or are
•
In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe
operation of the unit.
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
Make sure you always have the unit placed so it is
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
..........................................................................................................
..........................................................................................................
•
Protect the unit from strong impact.
(Do not drop it!)
•
..........................................................................................................
•
The unit should be connected to a power supply
only of the type described in the operating instruc-
tions, or as marked on the unit.
..........................................................................................................
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Do not force the unit’s power-supply cord to share
an outlet with an unreasonable number of other
devices. Be especially careful when using extension
cords—the total power used by all devices you
have connected to the extension cord’s outlet must
never exceed the power rating (watts/ amperes) for
the extension cord. Excessive loads can cause the
insulation on the cord to heat up and eventually
melt through.
•
Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
•
Never handle the power cord or its plugs with wet
hands when plugging into, or unplugging from, an
outlet or this unit.
..........................................................................................................
•
Before moving the unit, disconnect the power plug
from the outlet, and pull out all cords from external
devices.
..........................................................................................................
•
Before using the unit in a foreign country, consult
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the "Information" page.
..........................................................................................................
•
Before cleaning the unit, turn off the power and
unplug the power cord from the outlet (Mainte-
nance p. 5).
..........................................................................................................
..........................................................................................................
•
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out of
the outlet.
•
The unit should be located so that its location or
position does not interfere with its proper venti-
lation.
..........................................................................................................
•
Should you remove the optical connector caps,
make sure to put them in a safe place out of
children's reach, so there is no chance of them
being swallowed accidentally.
..........................................................................................................
•
Always grasp only the plug on the power-supply
cord when plugging into, or unplugging from, an
outlet or this unit.
..........................................................................................................
..........................................................................................................
•
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
..........................................................................................................
Co n te n ts
Names of Things and What They Do ....................................................6
Important Notes on Placement .................................................................................................................8
Precautions When Connecting and Turning on the Power ..................................................................8
Using Two DS-50A Monitors for Stereo Sound......................................................................................8
Using As a Reference Monitor for the V-Studio or V-Mixer ................................................................9
Reference ..............................................................................................10
Troubleshooting ........................................................................................................................................10
Specifications .............................................................................................................................................10
Dimensions ................................................................................................................................................10
Frequency Response .................................................................................................................................11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPO RTAN T N O TES
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2
and 3, please read and observe the following:
which could cause burns if they are accidentally
touched.
Po w e r Su p p ly
301
•
Placing heavy objects on this unit may result in injury if
it overturns or falls.
•
Do not use this unit on the same power circuit with any
device that will generate line noise (such as an electric
motor or variable lighting system).
Please also refer to “Important Notes on Placement”
(p. 8).
307
•
Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/ or damage to speakers or other devices.
Ma in te n a n ce
401b
•
To clean the unit, use a dry, soft cloth; or one that is
slightly dampened. Try to wipe the entire surface using an
equal amount of strength. Rubbing too hard in the same
area can damage the finish.
Pla ce m e n t
352
•
This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
402
•
Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/ or
deformation.
354b
•
Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a
piano light), or powerful spotlights to shine upon the
same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
Ad d itio n a l Pre ca u tio n s
553
•
Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
355
556
•
•
To avoid possible breakdown, do not use the unit in a wet
area, such as an area exposed to rain or other moisture.
When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
356
•
Do not allow rubber, vinyl, or similar materials to remain
on the piano for long periods of time. Such objects can
discolor or otherwise harmfully affect the finish.
557
•
A small amount of heat will radiate from the unit during
normal operation.
357
•
Do not put anything that contains water (e.g., flower
vases) on the piano. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the
unit. Swiftly wipe away any liquid that spills on the unit
using a dry, soft cloth.
558b
•
To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels (especially when it is late at
night).
559a
•
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
359
•
Do not paste stickers, decals, or the like to this instrument.
Peeling such matter off the instrument may damage the
exterior finish.
562
•
Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
•
•
During Operation, this device must be placed at a distance
of no less than 50 cm from any walls.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level
to be extremely low, or impossible to hear. For infor-
mation on cable specifications, contact the manufac-
turer of the cable.
Do not allow objects to remain on top of the unit while it is
in operation.
•
If you cover the heat sink, their function is defeated,
and their temperature can rise to overly high levels,
5
Download from Www.Somanuals.com. All Manuals Search And Download.
N a m e s o f Th in g s a n d W h a t Th e y Do
HF Driver
* Do not touch the diaphragm.
Digita l In Indica tor
This lights up when output is
received from a connected digital
device or during standby.
Connect the digital-signal output
device, set the "Input Select switch"
to DIGITAL INPUT, and set the
"Digital Input select switch"
according to the connector to which
LF Driver
the device is attached (Coaxial or
Optical).
* Do not touch the speaker cone.
Ba ss-reflex Ducts
When the connected digital-signal
output device is not powered up,
the Digital In indicator does not
light up.
*
These are conduits
for rich, bass-range reproduction.
Pow er Indica tor
Lights when power is on.
1 An a lo g In p u t
XLR/ TRS Ph o n e In p u t Co n n e cto r
(An a lo g In p u t)
1 0
This is for connecting XLR or TRS phone plugs.
XLR type
5
6
3
1
7
TRS
phone type
(Balanced)
Phone type
(Unbalanced)
Both balanced and unbalanced connections are
possible.
8
9
N O TE
The pin assignment for the connector is as shown below.
Before making any connections, make sure that this pin
assignment is compatible with that of all your other devices.
GND(SLEEVE)
2
1:GND
2:HOT
HOT(TIP)
3:COLD
COLD(RING)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Things and What They Do
2 Dig ita l In p u t
3 In p u t Se le ct Sw itch
Used to select Digital Input or Analog Input.
Co a x ia l In p u t Co n n e cto r (Dig ita l In p u t)
This is the digital input connector for coaxial cable.
Select the connector used for the input signal.
4 Th ru (Dig ita l O u t) Co n n e cto r
N O TE
When connecting multiple DS-50A monitors with digital
It cannot be used for input of analog audio signals (no sound is
signals, this connector is used for output to the second
DS-50A.
produced).
O p tica l In p u t Co n n e cto r (Dig ita l In p u t)
This is the digital input connector for optic-fiber cable.
Refer to “Connection Examples” (p. 8, 9).
Use commercially available optical cable for audio
equipment to make the connection.
5 Le ve l Co n tro l
This adjusts the input level. Turning the control
clockwise increases the sound from the speakers.
N O TE
O p tica l-co n n e cto r Pro te ctive Ca p
6 HF Trim Co n tro l
This adjusts the sound quality of the treble range
•
•
•
After removing the protective cap, put in a safe place
so that it doesn’t get lost.
(10 kHz, +/ -3 dB).
7 LF Trim Co n tro l
When not using the optical connector, attach the cap
to keep the connector safe.
This adjusts the sound quality of the bass range
(80 Hz, +/ -3 dB).
When using the optical connector, be sure that the cap
you removed is placed out of the reach of children. If
a child has accidentally swallowed a cap, see a doctor
immediately.
MEMO
The LF Trim and HF Trim controls on the DS-50A are
designed to correct the sound quality of the sonic field.
Use these to make fine adjustments to match the usage
conditions.
Dig ita l In p u t Se le ct Sw itch
This switch selects Optical or Coaxial. Select the
8 Po w e r Sw itch
connector used for the input signal.
This switch turns the power on/ off.
Assig n Sw itch
This switch selects the stereo position of the digital signal.
N O TE
It selects Right, L+R, or Left when using two DS-50A
monitors for stereo sound (with digital signals).
Choose the setting appropriate for your setup.
•
Before turning the power on or off, you must lower the
volume of this unit and your connected device etc.
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required
before the unit will operate normally.
•
MEMO
With the DS-50A, there is no difference between L and R.
When using the digital input connectors of two DS-50A
monitors for stereo sound, the digital signal can be input
to either L or R.
9 AC In le t
Connect the included Power cord here. Plug it firmly in,
so that the cable does not accidentally become
disconnected.
1 0 He a t Sin k
This is a heat-radiating plate that dissipates excess heat.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ctio n Ex a m p le s
Im p o rta n t N o te s o n
Pla ce m e n t
Preca utions W hen Connecting
a nd Turning on the Pow er
During setup and transport, be careful not to damage the
vibrating portions (the speaker cone and diaphragm).
Be sure to place the monitor so that the heat sink on the
rear panel is not obstructed. Also, make sure the monitor
does not touch any curtains or other fabrics.
The heat sink performs cooling when the monitor is
placed as shown below. Do not place the monitor on its
side or upside down.
To prevent malfunction and/ or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
Once the connections have been completed, turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/ or damage to speakers and other
devices.(When turning the power off, reverse this
procedure.)
Connected devices DS-50A
When this device is in operation, the heat
sink located on the rear panel will
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
become hot. Take care not to touch them
with your hands.
* Please also refer to “Placement” in IMPORTANT NOTES (p. 5).
Usin g Tw o DS-5 0 A Mo n ito rs fo r Ste re o So u n d
Example for
Using Analog Input Connectors
Example for
Using Digital Input Connectors
Select
DIGITAL IN
(COAXIAL)
THRU
(DIGITAL OUT)
DIGITAL IN
(COAXIAL)
(OPTICAL)
Recording Equipment,etc.
Mixer,etc.
DIGITAL OUT
CD Player, MD Player,etc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Examples
Usin g As a Re fe re n ce Mo n ito r fo r th e V-Stu d io o r V-Mix e r
The DS-50A supports the "Speaker Modeling" function that is included in the Roland V-studio (VS series) and V-mixer
(VM series).
N O TE
What’s Speaker Modeling?
•
Please be aware that not all VS/ VM series units are
capable of providing speaker modeling. Before making
your purchase, you should confirm that the unit you
are considering does indeed provide the features you
desire.
This feature uses digital signal processing to model the
changes in sound quality produced by a particular speaker
during audio output. This lets you use one type of monitor
speaker to emulate speakers from other manufacturers, and
even the speakers from small household-use television sets
and other equipment. You can use the DS-50A in combination
with this to simulate the sound checks at mixdown, which
conventionally have required switching between multiple
pairs of monitors set up to compare the sound.
•
Speaker Modeling is not possible using just the DS-
50A. Take a look at the documentation for the VS/ VM
series.
Connection Example
(VS-890)
DIGITAL IN
(COAXIAL)
THRU
(DIGITAL OUT)
DIGITAL IN
(COAXIAL)
(OPTICAL)
It is also possible to connect to
the Analog Input using analog cable.
Select
VS-890
MEMO
Tip s a b o u t h ig h so u n d q u a lity p la y b a ck
•
Please pay careful attention to the placement location. In order to take full advantage of the low-frequency playback
capabilities of this device, we recommend that you place it on a hard and strong base.
•
When using digital in connections, turn down the LEVEL knob of this device and raise the output level of the connected
device. This will take advantage of the full number of bits in the digital signal, improving the audio quality.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Re fe re n ce
Tro u b le sh o o tin g
If there is no sound or if the unit does not operate as you expect, please check the following points first. If this does
not resolve the problem, contact the nearest Roland service center or authorized Roland distributor.
Th e re ’s N o So u n d
Th e vo lu m e le ve l o f th e in stru m e n t
Make sure the Input Level control has not been turned
fully counterclockwise.
co n n e cte d to AN ALO G IN PUT is to o lo w
Could you be using a connection cable that contains a
resistor? Use a connection cable that does not contain a
resistor.
Make sure the Input Select switch has been set to the
connector where the input signal is connected (Digital
Input or Analog Input).
Make sure the Digital Input select switch has been set
to the connector where the input signal is connected
(Optical or Coaxial).
Du rin g Dig ita l Sig n a l In p u t, th e Ste re o
Im a g e Is Re ve rse d o r So u n d s Un n a tu ra l,
o r O u tp u t Do e sn ’t So u n d Lik e Ste re o
Check the setting of the Assign switch (Right, L+R, or
Left). The DS-50A uses an identical construction for the
left and right monitors, and makes no distinction between
left and right. During digital signal input, set the Assign
switch L or R as appropriate for your setup.
Input a digital signal to the Digital Input connector.
No sound is produced when an analog signal is input.
Sp e cifica tio n s
System
2 Way Bi-Amplified Monitor
LF Amplifier Power
30 W
Controls
LEVEL Knob
LF TRIM Knob (80 Hz, +/ -3dB)
HF TRIM Knob (10 kHz, +/ -3dB)
INPUT SELECT SW
HF Amplifier Power
Enclosure
20 W
Bass-reflex type
Analog in
Cabinet
1/ 2" MDF, Baffle: 3/ 4” MDF
Input Sensitivity
0 dBu (0.775 Vrms)
(Analog In/ Digital In)
LF Driver
120 mm (5") Foamed polypropylene
cone type, magnetically shielded
ASSIGN SW (Right/ L+R/ Left)
DIGITAL INPUT SELECT SW
(Optical/ Coaxial)
Input Impedance
20k ohm (Balanced/ Unbalanced)
HF Driver
19 mm (3/ 4") soft dome type,
magnetically shielded
POWER SW
Digital in
Format
Conformity with S/ P DIF
Indicators
POWER
DIGITAL IN
Frequency Response
68 Hz to 22 kHz (+/ -3dB)
Sample Rate
32 kHz to 96 kHz (de-emphasis: OFF)
Connectors
ANALOG INPUT(XLR/ TRS PHONE,
Balanced/ Unbalanced)
Crossover Frequency
2.3 kHz (active third order)
D/A Converter
24 bit
DIGITAL INPUT (Optical)
DIGITAL INPUT (Coaxial)
DIGITAL THRU OUT (Coaxial)
Dim e n sio n s
Power Supply
AC117 V,AC230 V or AC240 V
197 (7-3/4")
261 (10-1/4")
Power Consumption
50 W
Dimensions
197 (W) x 267 (D) x 312 (H) mm
7-3/ 4 (W) x 10-1/ 2 (D) x 12-1/ 4 (H)
inches
312
(12-1/4")
Weight
8 kg / 17 lbs. 11 oz.
Accessories
Owner’s Manual
Power cord
6
* In the interest of product improvement, the
specifications and/or appearance of this unit
are subject to change without prior notice.
(1/4")
267 (10-1/2")
1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Fre q u e n cy Re sp o n se
(dB)
20
HF: max
flat
LF: max
flat
10
0
LF: min
HF: min
-10
-20
-30
(Hz)
20k
20
50
100
200
500
1k
2k
5k
10k
Frequency
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
In fo rm a tio n
When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as
shown below.
PAN AMA
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City,
REP. DE PANAMA
TEL: (507) 315-0101
TAIW AN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
ITALY
JO RDAN
AFRICA
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
AMMAN Trading Agency
Prince Mohammed St. P.O. Box
825 Amman 11118 JORDAN
TEL: (06) 4641200
EGYPT
Al Fanny Trading Office
P.O. Box 2904,
El Horrieh Heliopolos, Cairo,
EGYPT
TEL: (02) 4185531
N O RW AY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: (02) 2561 3339
KUW AIT
Easa Husain Al-Yousifi
Abdullah Salem Street,
Safat KUWAIT
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Edeficio, El Dorado Planta Baja
Asuncion PARAGUAY
THAILAN D
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
TEL: 5719499
REUN IO N
Maison FO - YAM Marcel
25 Rue Jules Merman, ZL
Chaudron - BP79 97491
Ste Clotilde REUNION
TEL: 28 29 16
TEL: 273 0074
LEBAN O N
A. Chahine & Fils
P.O. Box 16-5857 Gergi Zeidan St.
Chahine Building, Achrafieh
Beirut, LEBANON
TEL: 595-21-492147
PO LAN D
P. P. H. Brzostowicz
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
PERU
VIDEO Broadcast S.A.
Portinari 199 (ESQ. HALS),
San Borja, Lima 41,
REP. OF PERU
TEL: 51-14-758226
VIETN AM
Saigon Music
138 Tran Quang Khai St.,
District 1
Ho Chi Minh City
VIETNAM
TEL: (08) 844-4068
TEL: (01) 335799
SO UTH AFRICA
That Other Music Shop
(PTY) Ltd.
11 Melle Street (Cnr Melle and
Juta Street)
Braamfontein, 2001,
Republic of SOUTH AFRICA
TEL: (011) 403 4105
Q ATAR
Badie Studio & Stores
P.O. Box 62,
DOHA QATAR
TEL: 423554
PO RTUGAL
Tecnologias Musica e Audio,
Roland Portugal, S.A.
RUA DE SANTA CARARINA
131/ 133, 4000-450 PORTO
PORTUGAL
URUGUAY
Todo Musica S.A.
Cuareim 1844, Montevideo,
URUGUAY
AUSTRALIA/
N EW ZEALAN D
TEL: 5982-924-2335
SAUDI ARABIA
aDawliah Universal
Electronics APL
P.O. Box 2154 ALKHOBAR 31952,
SAUDI ARABIA
TEL: (022) 208 4456
Paul Bothner (PTY) Ltd.
17 Werdmuller Centre Claremont
7700
VEN EZUELA
RO MAN IA
FBS LINES
Plata Libertatii 1.
RO-4200 Cheorgheni
TEL: (066) 164-609
Musicland Digital C.A.
Av. Francisco de Miranda,
Centro Parque de Cristal, Nivel
C2 Local 20 Caracas
AUSTRALIA
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
Republic of SOUTH AFRICA
TEL: (03) 898 2081
P.O. Box 23032
VENEZUELA
TEL: (02) 285 9218
Claremont, Cape Town
SOUTH AFRICA, 7735
TEL: (021) 64 4030
SYRIA
Technical Light & Sound
Center
Khaled Ibn Al Walid St.
P.O. Box 13520
Damascus - SYRIA
TEL: (011) 2235 384
RUSSIA
TEL: (02) 9982 8266
Slami Music Company
Sadojava-Triumfalnaja st., 16
103006 Moscow, RUSSIA
TEL: 095 209 2193
EURO PE
N EW ZEALAN D
Roland Corporation (NZ) Ltd.
97 Mt. Eden Road, Mt. Eden,
Auckland 3, NEW ZEALAND
TEL: (09) 3098 715
ASIA
AUSTRIA
Roland Austria GES.M.B.H.
Siemensstrasse 4, P.O. Box 74,
A-6063 RUM, AUSTRIA
SPAIN
Roland Electronics
de España, S. A.
Calle Bolivia 239, 08020
Barcelona, SPAIN
CHIN A
Beijing Xinghai Musical
Instruments Co., Ltd.
6 Huangmuchang Chao Yang
District, Beijing, CHINA
TEL: (010) 6774 7491
TURKEY
Barkat muzik aletleri ithalat
ve ihracat Ltd Sti
Siraselviler cad.Guney is hani 84-
86/ 6, Taksim. Istanbul. TURKEY
TEL: (0212) 2499324
TEL: (0512) 26 44 260
CEN TRAL/ LATIN
AMERICA
BELGIUM/ HOLLAND/
LUXEMBO URG
Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
TEL: (93) 308 1000
SW EDEN
HO N G KO N G
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
ARGEN TIN A
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (08) 702 0020
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor DUBAI
U.A.E.
Instrumentos Musicales S.A.
Florida 656 2nd Floor
Office Number 206A
Buenos Aires
ARGENTINA, CP1005
TEL: (54-11) 4- 393-6057
DEN MARK
TEL: 2415 0911
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
SW ITZERLAN D
Roland (Switzerland) AG
Musitronic AG
Gerberstrasse 5, CH-4410 Liestal,
SWITZERLAND
TEL: (04) 3360715
IN DIA
BRAZIL
Roland Brasil Ltda.
R. Coronel Octaviano da Silveira
203 05522-010
Sao Paulo BRAZIL
TEL: (011) 3743 9377
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
Flats Compound Off. Dr. Edwin
Moses Road, Mumbai-400011,
INDIA
TEL: (039)16 6200
N O RTH AMERICA
TEL: (061) 921 1615
FRAN CE
Roland France SA
4, Rue Paul Henri SPAAK,
Parc de l'Esplanade, F 77 462 St.
Thibault, Lagny Cedex FRANCE
TEL: 01 600 73 500
CAN ADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V6V 2M4 CANADA
TEL: (0604) 270 6626
TEL: (022) 498 3079
UKRAIN E
TIC-TAC
CO STA RICA
JUAN Bansbach
Instrumentos Musicales
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: (506)258-0211
IN DO N ESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
Mira Str. 19/ 108
P.O. Box 180
295400 Munkachevo, UKRAINE
TEL: (03131) 414-40
FIN LAN D
Roland Scandinavia As,
Filial Finland
Lauttasaarentie 54 B
Fin-00201 Helsinki, FINLAND
TEL: (9) 682 4020
Roland Canada Music Ltd.
(Toronto Office)
Unit 2, 109 Woodbine Downs
Blvd, Etobicoke, ON
M9W 6Y1 CANADA
TEL: (0416) 213 9707
UN ITED KIN GDO M
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
CHILE
KO REA
Comercial Fancy S.A.
Avenida Rancagua #0330
Providencia Santiago, CHILE
TEL: 56-2-373-9100
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
UNITED KINGDOM
TEL: (01792) 700139
GERMAN Y
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt,
GERMANY
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
EL SALVADO R
OMNI MUSIC
75 Avenida Notre YY Alameda,
Juan Pablo 2, No. 4010
San Salvador, EL SALVADOR
TEL: (503) 262-0788
MALAYSIA
MIDDLE EAST
Bentley Music SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala Lumpur,MALAYSIA
TEL: (03) 2443333
TEL: (040) 52 60090
TEL: (323) 890 3700
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
26422 Patras, GREECE
TEL: 061-435400
BAHRAIN
Moon Stores
Bab Al Bahrain Road,
P.O. Box 20077
State of BAHRAIN
TEL: 211 005
MEXICO
PHILIPPIN ES
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico D.F.
MEXICO
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
HUN GARY
CYPRUS
Radex Sound Equipment Ltd.
17 Diagorou St., P.O. Box 2046,
Nicosia CYPRUS
TEL: (525) 668 04 80
TEL: (02) 899 9801
Intermusica Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
SIN GAPO RE
Swee Lee Company
150 Sims Drive,
SINGAPORE 387381
TEL: 748-1669
La Casa Wagner de
Guadalajara s.a. de c.v.
Av. Corona No. 202 S.J.
Guadalajara, Jalisco Mexico
C.P.44100 MEXICO
TEL: (02) 453 426
IRELAN D
Roland Ireland
Audio House, Belmont Court,
Donnybrook, Dublin 4.
Republic of IRELAND
TEL: (01) 2603501
ISRAEL
Halilit P. Greenspoon &
Sons Ltd.
8 Retzif Fa'aliya Hashnya St.
Tel-Aviv-Yaho ISRAEL
TEL: (03) 6823666
TEL: (3) 613 1414
CRISTOFORI MUSIC PTE
LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 243 9555
As of June 1, 2000 (Roland)
17055232
Download from Www.Somanuals.com. All Manuals Search And Download.
|